代码拉取完成，页面将自动刷新
同步操作将从 src-openEuler/openssl 强制同步，此操作会覆盖自 Fork 仓库以来所做的任何修改，且无法恢复！！！
确定后同步将在后台操作，完成时将刷新页面，请耐心等待。
From c3ac0d22f1924113e6bea60d6961501d7a36e13d Mon Sep 17 00:00:00 2001
From: Matt Caswell <matt@openssl.org>
Date: Fri, 31 May 2024 16:35:16 +0100
Subject: [PATCH] Add a test for ALPN and NPN
---
doc/man3/SSL_CTX_set_alpn_select_cb.pod | 26 +-
ssl/statem/extensions_clnt.c | 27 +-
ssl/statem/extensions_srvr.c | 3 +-
test/helpers/handshake.c | 6 +
test/recipes/70-test_npn.t | 73 ++++
test/ssl-tests/08-npn.cnf | 553 +++++++++++++-----------
test/ssl-tests/08-npn.cnf.in | 35 ++
test/ssl-tests/09-alpn.cnf | 66 ++-
test/ssl-tests/09-alpn.cnf.in | 33 ++
test/sslapitest.c | 362 ++++++++++++++++
util/perl/TLSProxy/Message.pm | 9 +
util/perl/TLSProxy/NextProto.pm | 54 +++
util/perl/TLSProxy/Proxy.pm | 1 +
13 files changed, 994 insertions(+), 254 deletions(-)
create mode 100644 test/recipes/70-test_npn.t
create mode 100644 util/perl/TLSProxy/NextProto.pm
diff --git a/doc/man3/SSL_CTX_set_alpn_select_cb.pod b/doc/man3/SSL_CTX_set_alpn_select_cb.pod
index 102e657..a29557d 100644
--- a/doc/man3/SSL_CTX_set_alpn_select_cb.pod
+++ b/doc/man3/SSL_CTX_set_alpn_select_cb.pod
@@ -52,7 +52,8 @@ SSL_select_next_proto, SSL_get0_alpn_selected, SSL_get0_next_proto_negotiated
SSL_CTX_set_alpn_protos() and SSL_set_alpn_protos() are used by the client to
set the list of protocols available to be negotiated. The B<protos> must be in
protocol-list format, described below. The length of B<protos> is specified in
-B<protos_len>.
+B<protos_len>. Setting B<protos_len> to 0 clears any existing list of ALPN
+protocols and no ALPN extension will be sent to the server.
SSL_CTX_set_alpn_select_cb() sets the application callback B<cb> used by a
server to select which protocol to use for the incoming connection. When B<cb>
@@ -73,9 +74,16 @@ B<server_len> and B<client>, B<client_len> must be in the protocol-list format
described below. The first item in the B<server>, B<server_len> list that
matches an item in the B<client>, B<client_len> list is selected, and returned
in B<out>, B<outlen>. The B<out> value will point into either B<server> or
-B<client>, so it should be copied immediately. If no match is found, the first
-item in B<client>, B<client_len> is returned in B<out>, B<outlen>. This
-function can also be used in the NPN callback.
+B<client>, so it should be copied immediately. The client list must include at
+least one valid (nonempty) protocol entry in the list.
+
+The SSL_select_next_proto() helper function can be useful from either the ALPN
+callback or the NPN callback (described below). If no match is found, the first
+item in B<client>, B<client_len> is returned in B<out>, B<outlen> and
+B<OPENSSL_NPN_NO_OVERLAP> is returned. This can be useful when implementating
+the NPN callback. In the ALPN case, the value returned in B<out> and B<outlen>
+must be ignored if B<OPENSSL_NPN_NO_OVERLAP> has been returned from
+SSL_select_next_proto().
SSL_CTX_set_next_proto_select_cb() sets a callback B<cb> that is called when a
client needs to select a protocol from the server's provided list, and a
@@ -85,9 +93,10 @@ must be set to point to the selected protocol (which may be within B<in>).
The length of the protocol name must be written into B<outlen>. The
server's advertised protocols are provided in B<in> and B<inlen>. The
callback can assume that B<in> is syntactically valid. The client must
-select a protocol. It is fatal to the connection if this callback returns
-a value other than B<SSL_TLSEXT_ERR_OK>. The B<arg> parameter is the pointer
-set via SSL_CTX_set_next_proto_select_cb().
+select a protocol (although it may be an empty, zero length protocol). It is
+fatal to the connection if this callback returns a value other than
+B<SSL_TLSEXT_ERR_OK> or if the zero length protocol is selected. The B<arg>
+parameter is the pointer set via SSL_CTX_set_next_proto_select_cb().
SSL_CTX_set_next_protos_advertised_cb() sets a callback B<cb> that is called
when a TLS server needs a list of supported protocols for Next Protocol
@@ -149,7 +158,8 @@ A match was found and is returned in B<out>, B<outlen>.
=item OPENSSL_NPN_NO_OVERLAP
No match was found. The first item in B<client>, B<client_len> is returned in
-B<out>, B<outlen>.
+B<out>, B<outlen> (or B<NULL> and 0 in the case where the first entry in
+B<client> is invalid).
=back
diff --git a/ssl/statem/extensions_clnt.c b/ssl/statem/extensions_clnt.c
index 842be07..b21ccf9 100644
--- a/ssl/statem/extensions_clnt.c
+++ b/ssl/statem/extensions_clnt.c
@@ -1536,7 +1536,8 @@ int tls_parse_stoc_npn(SSL *s, PACKET *pkt, unsigned int context, X509 *x,
PACKET_data(pkt),
PACKET_remaining(pkt),
s->ctx->ext.npn_select_cb_arg) !=
- SSL_TLSEXT_ERR_OK) {
+ SSL_TLSEXT_ERR_OK
+ || selected_len == 0) {
SSLfatal(s, SSL_AD_HANDSHAKE_FAILURE, SSL_R_BAD_EXTENSION);
return 0;
}
@@ -1565,6 +1566,8 @@ int tls_parse_stoc_alpn(SSL *s, PACKET *pkt, unsigned int context, X509 *x,
size_t chainidx)
{
size_t len;
+ PACKET confpkt, protpkt;
+ int valid = 0;
/* We must have requested it. */
if (!s->s3.alpn_sent) {
@@ -1583,6 +1586,28 @@ int tls_parse_stoc_alpn(SSL *s, PACKET *pkt, unsigned int context, X509 *x,
SSLfatal(s, SSL_AD_DECODE_ERROR, SSL_R_BAD_EXTENSION);
return 0;
}
+
+ /* It must be a protocol that we sent */
+ if (!PACKET_buf_init(&confpkt, s->ext.alpn, s->ext.alpn_len)) {
+ SSLfatal(s, SSL_AD_INTERNAL_ERROR, ERR_R_INTERNAL_ERROR);
+ return 0;
+ }
+ while (PACKET_get_length_prefixed_1(&confpkt, &protpkt)) {
+ if (PACKET_remaining(&protpkt) != len)
+ continue;
+ if (memcmp(PACKET_data(pkt), PACKET_data(&protpkt), len) == 0) {
+ /* Valid protocol found */
+ valid = 1;
+ break;
+ }
+ }
+
+ if (!valid) {
+ /* The protocol sent from the server does not match one we advertised */
+ SSLfatal(s, SSL_AD_DECODE_ERROR, SSL_R_BAD_EXTENSION);
+ return 0;
+ }
+
OPENSSL_free(s->s3.alpn_selected);
s->s3.alpn_selected = OPENSSL_malloc(len);
if (s->s3.alpn_selected == NULL) {
diff --git a/ssl/statem/extensions_srvr.c b/ssl/statem/extensions_srvr.c
index 1fab5a3..51ea74b 100644
--- a/ssl/statem/extensions_srvr.c
+++ b/ssl/statem/extensions_srvr.c
@@ -1471,9 +1471,10 @@ EXT_RETURN tls_construct_stoc_next_proto_neg(SSL *s, WPACKET *pkt,
return EXT_RETURN_FAIL;
}
s->s3.npn_seen = 1;
+ return EXT_RETURN_SENT;
}
- return EXT_RETURN_SENT;
+ return EXT_RETURN_NOT_SENT;
}
#endif
diff --git a/test/helpers/handshake.c b/test/helpers/handshake.c
index 285391b..dd5a6d9 100644
--- a/test/helpers/handshake.c
+++ b/test/helpers/handshake.c
@@ -348,6 +348,12 @@ static int parse_protos(const char *protos, unsigned char **out, size_t *outlen)
len = strlen(protos);
+ if (len == 0) {
+ *out = NULL;
+ *outlen = 0;
+ return 1;
+ }
+
/* Should never have reuse. */
if (!TEST_ptr_null(*out)
/* Test values are small, so we omit length limit checks. */
diff --git a/test/recipes/70-test_npn.t b/test/recipes/70-test_npn.t
new file mode 100644
index 0000000..f82e71a
--- /dev/null
+++ b/test/recipes/70-test_npn.t
@@ -0,0 +1,73 @@
+#! /usr/bin/env perl
+# Copyright 2024 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the Apache License 2.0 (the "License"). You may not use
+# this file except in compliance with the License. You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+use OpenSSL::Test qw/:DEFAULT cmdstr srctop_file/;
+use OpenSSL::Test::Utils;
+
+use TLSProxy::Proxy;
+
+my $test_name = "test_npn";
+setup($test_name);
+
+plan skip_all => "TLSProxy isn't usable on $^O"
+ if $^O =~ /^(VMS)$/;
+
+plan skip_all => "$test_name needs the dynamic engine feature enabled"
+ if disabled("engine") || disabled("dynamic-engine");
+
+plan skip_all => "$test_name needs the sock feature enabled"
+ if disabled("sock");
+
+plan skip_all => "$test_name needs NPN enabled"
+ if disabled("nextprotoneg");
+
+plan skip_all => "$test_name needs TLSv1.2 enabled"
+ if disabled("tls1_2");
+
+my $proxy = TLSProxy::Proxy->new(
+ undef,
+ cmdstr(app(["openssl"]), display => 1),
+ srctop_file("apps", "server.pem"),
+ (!$ENV{HARNESS_ACTIVE} || $ENV{HARNESS_VERBOSE})
+);
+
+$proxy->start() or plan skip_all => "Unable to start up Proxy for tests";
+plan tests => 1;
+
+my $npnseen = 0;
+
+# Test 1: Check sending an empty NextProto message from the client works. This is
+# valid as per the spec, but OpenSSL does not allow you to send it.
+# Therefore we must be prepared to receive such a message but we cannot
+# generate it except via TLSProxy
+$proxy->clear();
+$proxy->filter(\&npn_filter);
+$proxy->clientflags("-nextprotoneg foo -no_tls1_3");
+$proxy->serverflags("-nextprotoneg foo");
+$proxy->start();
+ok($npnseen && TLSProxy::Message->success(), "Empty NPN message");
+
+sub npn_filter
+{
+ my $proxy = shift;
+ my $message;
+
+ # The NextProto message always appears in flight 2
+ return if $proxy->flight != 2;
+
+ foreach my $message (@{$proxy->message_list}) {
+ if ($message->mt == TLSProxy::Message::MT_NEXT_PROTO) {
+ # Our TLSproxy NextProto message support doesn't support parsing of
+ # the message. If we repack it just creates an empty NextProto
+ # message - which is exactly the scenario we want to test here.
+ $message->repack();
+ $npnseen = 1;
+ }
+ }
+}
diff --git a/test/ssl-tests/08-npn.cnf b/test/ssl-tests/08-npn.cnf
index f38b3f6..1931d02 100644
--- a/test/ssl-tests/08-npn.cnf
+++ b/test/ssl-tests/08-npn.cnf
@@ -1,6 +1,6 @@
# Generated with generate_ssl_tests.pl
-num_tests = 20
+num_tests = 22
test-0 = 0-npn-simple
test-1 = 1-npn-client-finds-match
@@ -8,20 +8,22 @@ test-2 = 2-npn-client-honours-server-pref
test-3 = 3-npn-client-first-pref-on-mismatch
test-4 = 4-npn-no-server-support
test-5 = 5-npn-no-client-support
-test-6 = 6-npn-with-sni-no-context-switch
-test-7 = 7-npn-with-sni-context-switch
-test-8 = 8-npn-selected-sni-server-supports-npn
-test-9 = 9-npn-selected-sni-server-does-not-support-npn
-test-10 = 10-alpn-preferred-over-npn
-test-11 = 11-sni-npn-preferred-over-alpn
-test-12 = 12-npn-simple-resumption
-test-13 = 13-npn-server-switch-resumption
-test-14 = 14-npn-client-switch-resumption
-test-15 = 15-npn-client-first-pref-on-mismatch-resumption
-test-16 = 16-npn-no-server-support-resumption
-test-17 = 17-npn-no-client-support-resumption
-test-18 = 18-alpn-preferred-over-npn-resumption
-test-19 = 19-npn-used-if-alpn-not-supported-resumption
+test-6 = 6-npn-empty-client-list
+test-7 = 7-npn-empty-server-list
+test-8 = 8-npn-with-sni-no-context-switch
+test-9 = 9-npn-with-sni-context-switch
+test-10 = 10-npn-selected-sni-server-supports-npn
+test-11 = 11-npn-selected-sni-server-does-not-support-npn
+test-12 = 12-alpn-preferred-over-npn
+test-13 = 13-sni-npn-preferred-over-alpn
+test-14 = 14-npn-simple-resumption
+test-15 = 15-npn-server-switch-resumption
+test-16 = 16-npn-client-switch-resumption
+test-17 = 17-npn-client-first-pref-on-mismatch-resumption
+test-18 = 18-npn-no-server-support-resumption
+test-19 = 19-npn-no-client-support-resumption
+test-20 = 20-alpn-preferred-over-npn-resumption
+test-21 = 21-npn-used-if-alpn-not-supported-resumption
# ===========================================================
[0-npn-simple]
@@ -206,253 +208,318 @@ NPNProtocols = foo
# ===========================================================
-[6-npn-with-sni-no-context-switch]
-ssl_conf = 6-npn-with-sni-no-context-switch-ssl
+[6-npn-empty-client-list]
+ssl_conf = 6-npn-empty-client-list-ssl
-[6-npn-with-sni-no-context-switch-ssl]
-server = 6-npn-with-sni-no-context-switch-server
-client = 6-npn-with-sni-no-context-switch-client
-server2 = 6-npn-with-sni-no-context-switch-server2
+[6-npn-empty-client-list-ssl]
+server = 6-npn-empty-client-list-server
+client = 6-npn-empty-client-list-client
-[6-npn-with-sni-no-context-switch-server]
+[6-npn-empty-client-list-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[6-npn-with-sni-no-context-switch-server2]
+[6-npn-empty-client-list-client]
+CipherString = DEFAULT
+MaxProtocol = TLSv1.2
+VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
+VerifyMode = Peer
+
+[test-6]
+ExpectedClientAlert = HandshakeFailure
+ExpectedResult = ClientFail
+server = 6-npn-empty-client-list-server-extra
+client = 6-npn-empty-client-list-client-extra
+
+[6-npn-empty-client-list-server-extra]
+NPNProtocols = foo
+
+[6-npn-empty-client-list-client-extra]
+NPNProtocols =
+
+
+# ===========================================================
+
+[7-npn-empty-server-list]
+ssl_conf = 7-npn-empty-server-list-ssl
+
+[7-npn-empty-server-list-ssl]
+server = 7-npn-empty-server-list-server
+client = 7-npn-empty-server-list-client
+
+[7-npn-empty-server-list-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[6-npn-with-sni-no-context-switch-client]
+[7-npn-empty-server-list-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-6]
+[test-7]
+ExpectedNPNProtocol = foo
+server = 7-npn-empty-server-list-server-extra
+client = 7-npn-empty-server-list-client-extra
+
+[7-npn-empty-server-list-server-extra]
+NPNProtocols =
+
+[7-npn-empty-server-list-client-extra]
+NPNProtocols = foo
+
+
+# ===========================================================
+
+[8-npn-with-sni-no-context-switch]
+ssl_conf = 8-npn-with-sni-no-context-switch-ssl
+
+[8-npn-with-sni-no-context-switch-ssl]
+server = 8-npn-with-sni-no-context-switch-server
+client = 8-npn-with-sni-no-context-switch-client
+server2 = 8-npn-with-sni-no-context-switch-server2
+
+[8-npn-with-sni-no-context-switch-server]
+Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
+CipherString = DEFAULT
+PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
+
+[8-npn-with-sni-no-context-switch-server2]
+Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
+CipherString = DEFAULT
+PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
+
+[8-npn-with-sni-no-context-switch-client]
+CipherString = DEFAULT
+MaxProtocol = TLSv1.2
+VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
+VerifyMode = Peer
+
+[test-8]
ExpectedNPNProtocol = foo
ExpectedServerName = server1
-server = 6-npn-with-sni-no-context-switch-server-extra
-server2 = 6-npn-with-sni-no-context-switch-server2-extra
-client = 6-npn-with-sni-no-context-switch-client-extra
+server = 8-npn-with-sni-no-context-switch-server-extra
+server2 = 8-npn-with-sni-no-context-switch-server2-extra
+client = 8-npn-with-sni-no-context-switch-client-extra
-[6-npn-with-sni-no-context-switch-server-extra]
+[8-npn-with-sni-no-context-switch-server-extra]
NPNProtocols = foo
ServerNameCallback = IgnoreMismatch
-[6-npn-with-sni-no-context-switch-server2-extra]
+[8-npn-with-sni-no-context-switch-server2-extra]
NPNProtocols = bar
-[6-npn-with-sni-no-context-switch-client-extra]
+[8-npn-with-sni-no-context-switch-client-extra]
NPNProtocols = foo,bar
ServerName = server1
# ===========================================================
-[7-npn-with-sni-context-switch]
-ssl_conf = 7-npn-with-sni-context-switch-ssl
+[9-npn-with-sni-context-switch]
+ssl_conf = 9-npn-with-sni-context-switch-ssl
-[7-npn-with-sni-context-switch-ssl]
-server = 7-npn-with-sni-context-switch-server
-client = 7-npn-with-sni-context-switch-client
-server2 = 7-npn-with-sni-context-switch-server2
+[9-npn-with-sni-context-switch-ssl]
+server = 9-npn-with-sni-context-switch-server
+client = 9-npn-with-sni-context-switch-client
+server2 = 9-npn-with-sni-context-switch-server2
-[7-npn-with-sni-context-switch-server]
+[9-npn-with-sni-context-switch-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[7-npn-with-sni-context-switch-server2]
+[9-npn-with-sni-context-switch-server2]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[7-npn-with-sni-context-switch-client]
+[9-npn-with-sni-context-switch-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-7]
+[test-9]
ExpectedNPNProtocol = bar
ExpectedServerName = server2
-server = 7-npn-with-sni-context-switch-server-extra
-server2 = 7-npn-with-sni-context-switch-server2-extra
-client = 7-npn-with-sni-context-switch-client-extra
+server = 9-npn-with-sni-context-switch-server-extra
+server2 = 9-npn-with-sni-context-switch-server2-extra
+client = 9-npn-with-sni-context-switch-client-extra
-[7-npn-with-sni-context-switch-server-extra]
+[9-npn-with-sni-context-switch-server-extra]
NPNProtocols = foo
ServerNameCallback = IgnoreMismatch
-[7-npn-with-sni-context-switch-server2-extra]
+[9-npn-with-sni-context-switch-server2-extra]
NPNProtocols = bar
-[7-npn-with-sni-context-switch-client-extra]
+[9-npn-with-sni-context-switch-client-extra]
NPNProtocols = foo,bar
ServerName = server2
# ===========================================================
-[8-npn-selected-sni-server-supports-npn]
-ssl_conf = 8-npn-selected-sni-server-supports-npn-ssl
+[10-npn-selected-sni-server-supports-npn]
+ssl_conf = 10-npn-selected-sni-server-supports-npn-ssl
-[8-npn-selected-sni-server-supports-npn-ssl]
-server = 8-npn-selected-sni-server-supports-npn-server
-client = 8-npn-selected-sni-server-supports-npn-client
-server2 = 8-npn-selected-sni-server-supports-npn-server2
+[10-npn-selected-sni-server-supports-npn-ssl]
+server = 10-npn-selected-sni-server-supports-npn-server
+client = 10-npn-selected-sni-server-supports-npn-client
+server2 = 10-npn-selected-sni-server-supports-npn-server2
-[8-npn-selected-sni-server-supports-npn-server]
+[10-npn-selected-sni-server-supports-npn-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[8-npn-selected-sni-server-supports-npn-server2]
+[10-npn-selected-sni-server-supports-npn-server2]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[8-npn-selected-sni-server-supports-npn-client]
+[10-npn-selected-sni-server-supports-npn-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-8]
+[test-10]
ExpectedNPNProtocol = bar
ExpectedServerName = server2
-server = 8-npn-selected-sni-server-supports-npn-server-extra
-server2 = 8-npn-selected-sni-server-supports-npn-server2-extra
-client = 8-npn-selected-sni-server-supports-npn-client-extra
+server = 10-npn-selected-sni-server-supports-npn-server-extra
+server2 = 10-npn-selected-sni-server-supports-npn-server2-extra
+client = 10-npn-selected-sni-server-supports-npn-client-extra
-[8-npn-selected-sni-server-supports-npn-server-extra]
+[10-npn-selected-sni-server-supports-npn-server-extra]
ServerNameCallback = IgnoreMismatch
-[8-npn-selected-sni-server-supports-npn-server2-extra]
+[10-npn-selected-sni-server-supports-npn-server2-extra]
NPNProtocols = bar
-[8-npn-selected-sni-server-supports-npn-client-extra]
+[10-npn-selected-sni-server-supports-npn-client-extra]
NPNProtocols = foo,bar
ServerName = server2
# ===========================================================
-[9-npn-selected-sni-server-does-not-support-npn]
-ssl_conf = 9-npn-selected-sni-server-does-not-support-npn-ssl
+[11-npn-selected-sni-server-does-not-support-npn]
+ssl_conf = 11-npn-selected-sni-server-does-not-support-npn-ssl
-[9-npn-selected-sni-server-does-not-support-npn-ssl]
-server = 9-npn-selected-sni-server-does-not-support-npn-server
-client = 9-npn-selected-sni-server-does-not-support-npn-client
-server2 = 9-npn-selected-sni-server-does-not-support-npn-server2
+[11-npn-selected-sni-server-does-not-support-npn-ssl]
+server = 11-npn-selected-sni-server-does-not-support-npn-server
+client = 11-npn-selected-sni-server-does-not-support-npn-client
+server2 = 11-npn-selected-sni-server-does-not-support-npn-server2
-[9-npn-selected-sni-server-does-not-support-npn-server]
+[11-npn-selected-sni-server-does-not-support-npn-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[9-npn-selected-sni-server-does-not-support-npn-server2]
+[11-npn-selected-sni-server-does-not-support-npn-server2]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[9-npn-selected-sni-server-does-not-support-npn-client]
+[11-npn-selected-sni-server-does-not-support-npn-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-9]
+[test-11]
ExpectedServerName = server2
-server = 9-npn-selected-sni-server-does-not-support-npn-server-extra
-client = 9-npn-selected-sni-server-does-not-support-npn-client-extra
+server = 11-npn-selected-sni-server-does-not-support-npn-server-extra
+client = 11-npn-selected-sni-server-does-not-support-npn-client-extra
-[9-npn-selected-sni-server-does-not-support-npn-server-extra]
+[11-npn-selected-sni-server-does-not-support-npn-server-extra]
NPNProtocols = bar
ServerNameCallback = IgnoreMismatch
-[9-npn-selected-sni-server-does-not-support-npn-client-extra]
+[11-npn-selected-sni-server-does-not-support-npn-client-extra]
NPNProtocols = foo,bar
ServerName = server2
# ===========================================================
-[10-alpn-preferred-over-npn]
-ssl_conf = 10-alpn-preferred-over-npn-ssl
+[12-alpn-preferred-over-npn]
+ssl_conf = 12-alpn-preferred-over-npn-ssl
-[10-alpn-preferred-over-npn-ssl]
-server = 10-alpn-preferred-over-npn-server
-client = 10-alpn-preferred-over-npn-client
+[12-alpn-preferred-over-npn-ssl]
+server = 12-alpn-preferred-over-npn-server
+client = 12-alpn-preferred-over-npn-client
-[10-alpn-preferred-over-npn-server]
+[12-alpn-preferred-over-npn-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[10-alpn-preferred-over-npn-client]
+[12-alpn-preferred-over-npn-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-10]
+[test-12]
ExpectedALPNProtocol = foo
-server = 10-alpn-preferred-over-npn-server-extra
-client = 10-alpn-preferred-over-npn-client-extra
+server = 12-alpn-preferred-over-npn-server-extra
+client = 12-alpn-preferred-over-npn-client-extra
-[10-alpn-preferred-over-npn-server-extra]
+[12-alpn-preferred-over-npn-server-extra]
ALPNProtocols = foo
NPNProtocols = bar
-[10-alpn-preferred-over-npn-client-extra]
+[12-alpn-preferred-over-npn-client-extra]
ALPNProtocols = foo
NPNProtocols = bar
# ===========================================================
-[11-sni-npn-preferred-over-alpn]
-ssl_conf = 11-sni-npn-preferred-over-alpn-ssl
+[13-sni-npn-preferred-over-alpn]
+ssl_conf = 13-sni-npn-preferred-over-alpn-ssl
-[11-sni-npn-preferred-over-alpn-ssl]
-server = 11-sni-npn-preferred-over-alpn-server
-client = 11-sni-npn-preferred-over-alpn-client
-server2 = 11-sni-npn-preferred-over-alpn-server2
+[13-sni-npn-preferred-over-alpn-ssl]
+server = 13-sni-npn-preferred-over-alpn-server
+client = 13-sni-npn-preferred-over-alpn-client
+server2 = 13-sni-npn-preferred-over-alpn-server2
-[11-sni-npn-preferred-over-alpn-server]
+[13-sni-npn-preferred-over-alpn-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[11-sni-npn-preferred-over-alpn-server2]
+[13-sni-npn-preferred-over-alpn-server2]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[11-sni-npn-preferred-over-alpn-client]
+[13-sni-npn-preferred-over-alpn-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-11]
+[test-13]
ExpectedNPNProtocol = bar
ExpectedServerName = server2
-server = 11-sni-npn-preferred-over-alpn-server-extra
-server2 = 11-sni-npn-preferred-over-alpn-server2-extra
-client = 11-sni-npn-preferred-over-alpn-client-extra
+server = 13-sni-npn-preferred-over-alpn-server-extra
+server2 = 13-sni-npn-preferred-over-alpn-server2-extra
+client = 13-sni-npn-preferred-over-alpn-client-extra
-[11-sni-npn-preferred-over-alpn-server-extra]
+[13-sni-npn-preferred-over-alpn-server-extra]
ALPNProtocols = foo
ServerNameCallback = IgnoreMismatch
-[11-sni-npn-preferred-over-alpn-server2-extra]
+[13-sni-npn-preferred-over-alpn-server2-extra]
NPNProtocols = bar
-[11-sni-npn-preferred-over-alpn-client-extra]
+[13-sni-npn-preferred-over-alpn-client-extra]
ALPNProtocols = foo
NPNProtocols = bar
ServerName = server2
@@ -460,356 +527,356 @@ ServerName = server2
# ===========================================================
-[12-npn-simple-resumption]
-ssl_conf = 12-npn-simple-resumption-ssl
+[14-npn-simple-resumption]
+ssl_conf = 14-npn-simple-resumption-ssl
-[12-npn-simple-resumption-ssl]
-server = 12-npn-simple-resumption-server
-client = 12-npn-simple-resumption-client
-resume-server = 12-npn-simple-resumption-server
-resume-client = 12-npn-simple-resumption-client
+[14-npn-simple-resumption-ssl]
+server = 14-npn-simple-resumption-server
+client = 14-npn-simple-resumption-client
+resume-server = 14-npn-simple-resumption-server
+resume-client = 14-npn-simple-resumption-client
-[12-npn-simple-resumption-server]
+[14-npn-simple-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[12-npn-simple-resumption-client]
+[14-npn-simple-resumption-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-12]
+[test-14]
ExpectedNPNProtocol = foo
HandshakeMode = Resume
ResumptionExpected = Yes
-server = 12-npn-simple-resumption-server-extra
-resume-server = 12-npn-simple-resumption-server-extra
-client = 12-npn-simple-resumption-client-extra
-resume-client = 12-npn-simple-resumption-client-extra
+server = 14-npn-simple-resumption-server-extra
+resume-server = 14-npn-simple-resumption-server-extra
+client = 14-npn-simple-resumption-client-extra
+resume-client = 14-npn-simple-resumption-client-extra
-[12-npn-simple-resumption-server-extra]
+[14-npn-simple-resumption-server-extra]
NPNProtocols = foo
-[12-npn-simple-resumption-client-extra]
+[14-npn-simple-resumption-client-extra]
NPNProtocols = foo
# ===========================================================
-[13-npn-server-switch-resumption]
-ssl_conf = 13-npn-server-switch-resumption-ssl
+[15-npn-server-switch-resumption]
+ssl_conf = 15-npn-server-switch-resumption-ssl
-[13-npn-server-switch-resumption-ssl]
-server = 13-npn-server-switch-resumption-server
-client = 13-npn-server-switch-resumption-client
-resume-server = 13-npn-server-switch-resumption-resume-server
-resume-client = 13-npn-server-switch-resumption-client
+[15-npn-server-switch-resumption-ssl]
+server = 15-npn-server-switch-resumption-server
+client = 15-npn-server-switch-resumption-client
+resume-server = 15-npn-server-switch-resumption-resume-server
+resume-client = 15-npn-server-switch-resumption-client
-[13-npn-server-switch-resumption-server]
+[15-npn-server-switch-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[13-npn-server-switch-resumption-resume-server]
+[15-npn-server-switch-resumption-resume-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[13-npn-server-switch-resumption-client]
+[15-npn-server-switch-resumption-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-13]
+[test-15]
ExpectedNPNProtocol = baz
HandshakeMode = Resume
ResumptionExpected = Yes
-server = 13-npn-server-switch-resumption-server-extra
-resume-server = 13-npn-server-switch-resumption-resume-server-extra
-client = 13-npn-server-switch-resumption-client-extra
-resume-client = 13-npn-server-switch-resumption-client-extra
+server = 15-npn-server-switch-resumption-server-extra
+resume-server = 15-npn-server-switch-resumption-resume-server-extra
+client = 15-npn-server-switch-resumption-client-extra
+resume-client = 15-npn-server-switch-resumption-client-extra
-[13-npn-server-switch-resumption-server-extra]
+[15-npn-server-switch-resumption-server-extra]
NPNProtocols = bar,foo
-[13-npn-server-switch-resumption-resume-server-extra]
+[15-npn-server-switch-resumption-resume-server-extra]
NPNProtocols = baz,foo
-[13-npn-server-switch-resumption-client-extra]
+[15-npn-server-switch-resumption-client-extra]
NPNProtocols = foo,bar,baz
# ===========================================================
-[14-npn-client-switch-resumption]
-ssl_conf = 14-npn-client-switch-resumption-ssl
+[16-npn-client-switch-resumption]
+ssl_conf = 16-npn-client-switch-resumption-ssl
-[14-npn-client-switch-resumption-ssl]
-server = 14-npn-client-switch-resumption-server
-client = 14-npn-client-switch-resumption-client
-resume-server = 14-npn-client-switch-resumption-server
-resume-client = 14-npn-client-switch-resumption-resume-client
+[16-npn-client-switch-resumption-ssl]
+server = 16-npn-client-switch-resumption-server
+client = 16-npn-client-switch-resumption-client
+resume-server = 16-npn-client-switch-resumption-server
+resume-client = 16-npn-client-switch-resumption-resume-client
-[14-npn-client-switch-resumption-server]
+[16-npn-client-switch-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[14-npn-client-switch-resumption-client]
+[16-npn-client-switch-resumption-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[14-npn-client-switch-resumption-resume-client]
+[16-npn-client-switch-resumption-resume-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-14]
+[test-16]
ExpectedNPNProtocol = bar
HandshakeMode = Resume
ResumptionExpected = Yes
-server = 14-npn-client-switch-resumption-server-extra
-resume-server = 14-npn-client-switch-resumption-server-extra
-client = 14-npn-client-switch-resumption-client-extra
-resume-client = 14-npn-client-switch-resumption-resume-client-extra
+server = 16-npn-client-switch-resumption-server-extra
+resume-server = 16-npn-client-switch-resumption-server-extra
+client = 16-npn-client-switch-resumption-client-extra
+resume-client = 16-npn-client-switch-resumption-resume-client-extra
-[14-npn-client-switch-resumption-server-extra]
+[16-npn-client-switch-resumption-server-extra]
NPNProtocols = foo,bar,baz
-[14-npn-client-switch-resumption-client-extra]
+[16-npn-client-switch-resumption-client-extra]
NPNProtocols = foo,baz
-[14-npn-client-switch-resumption-resume-client-extra]
+[16-npn-client-switch-resumption-resume-client-extra]
NPNProtocols = bar,baz
# ===========================================================
-[15-npn-client-first-pref-on-mismatch-resumption]
-ssl_conf = 15-npn-client-first-pref-on-mismatch-resumption-ssl
+[17-npn-client-first-pref-on-mismatch-resumption]
+ssl_conf = 17-npn-client-first-pref-on-mismatch-resumption-ssl
-[15-npn-client-first-pref-on-mismatch-resumption-ssl]
-server = 15-npn-client-first-pref-on-mismatch-resumption-server
-client = 15-npn-client-first-pref-on-mismatch-resumption-client
-resume-server = 15-npn-client-first-pref-on-mismatch-resumption-resume-server
-resume-client = 15-npn-client-first-pref-on-mismatch-resumption-client
+[17-npn-client-first-pref-on-mismatch-resumption-ssl]
+server = 17-npn-client-first-pref-on-mismatch-resumption-server
+client = 17-npn-client-first-pref-on-mismatch-resumption-client
+resume-server = 17-npn-client-first-pref-on-mismatch-resumption-resume-server
+resume-client = 17-npn-client-first-pref-on-mismatch-resumption-client
-[15-npn-client-first-pref-on-mismatch-resumption-server]
+[17-npn-client-first-pref-on-mismatch-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[15-npn-client-first-pref-on-mismatch-resumption-resume-server]
+[17-npn-client-first-pref-on-mismatch-resumption-resume-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[15-npn-client-first-pref-on-mismatch-resumption-client]
+[17-npn-client-first-pref-on-mismatch-resumption-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-15]
+[test-17]
ExpectedNPNProtocol = foo
HandshakeMode = Resume
ResumptionExpected = Yes
-server = 15-npn-client-first-pref-on-mismatch-resumption-server-extra
-resume-server = 15-npn-client-first-pref-on-mismatch-resumption-resume-server-extra
-client = 15-npn-client-first-pref-on-mismatch-resumption-client-extra
-resume-client = 15-npn-client-first-pref-on-mismatch-resumption-client-extra
+server = 17-npn-client-first-pref-on-mismatch-resumption-server-extra
+resume-server = 17-npn-client-first-pref-on-mismatch-resumption-resume-server-extra
+client = 17-npn-client-first-pref-on-mismatch-resumption-client-extra
+resume-client = 17-npn-client-first-pref-on-mismatch-resumption-client-extra
-[15-npn-client-first-pref-on-mismatch-resumption-server-extra]
+[17-npn-client-first-pref-on-mismatch-resumption-server-extra]
NPNProtocols = bar
-[15-npn-client-first-pref-on-mismatch-resumption-resume-server-extra]
+[17-npn-client-first-pref-on-mismatch-resumption-resume-server-extra]
NPNProtocols = baz
-[15-npn-client-first-pref-on-mismatch-resumption-client-extra]
+[17-npn-client-first-pref-on-mismatch-resumption-client-extra]
NPNProtocols = foo,bar
# ===========================================================
-[16-npn-no-server-support-resumption]
-ssl_conf = 16-npn-no-server-support-resumption-ssl
+[18-npn-no-server-support-resumption]
+ssl_conf = 18-npn-no-server-support-resumption-ssl
-[16-npn-no-server-support-resumption-ssl]
-server = 16-npn-no-server-support-resumption-server
-client = 16-npn-no-server-support-resumption-client
-resume-server = 16-npn-no-server-support-resumption-resume-server
-resume-client = 16-npn-no-server-support-resumption-client
+[18-npn-no-server-support-resumption-ssl]
+server = 18-npn-no-server-support-resumption-server
+client = 18-npn-no-server-support-resumption-client
+resume-server = 18-npn-no-server-support-resumption-resume-server
+resume-client = 18-npn-no-server-support-resumption-client
-[16-npn-no-server-support-resumption-server]
+[18-npn-no-server-support-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[16-npn-no-server-support-resumption-resume-server]
+[18-npn-no-server-support-resumption-resume-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[16-npn-no-server-support-resumption-client]
+[18-npn-no-server-support-resumption-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-16]
+[test-18]
HandshakeMode = Resume
ResumptionExpected = Yes
-server = 16-npn-no-server-support-resumption-server-extra
-client = 16-npn-no-server-support-resumption-client-extra
-resume-client = 16-npn-no-server-support-resumption-client-extra
+server = 18-npn-no-server-support-resumption-server-extra
+client = 18-npn-no-server-support-resumption-client-extra
+resume-client = 18-npn-no-server-support-resumption-client-extra
-[16-npn-no-server-support-resumption-server-extra]
+[18-npn-no-server-support-resumption-server-extra]
NPNProtocols = foo
-[16-npn-no-server-support-resumption-client-extra]
+[18-npn-no-server-support-resumption-client-extra]
NPNProtocols = foo
# ===========================================================
-[17-npn-no-client-support-resumption]
-ssl_conf = 17-npn-no-client-support-resumption-ssl
+[19-npn-no-client-support-resumption]
+ssl_conf = 19-npn-no-client-support-resumption-ssl
-[17-npn-no-client-support-resumption-ssl]
-server = 17-npn-no-client-support-resumption-server
-client = 17-npn-no-client-support-resumption-client
-resume-server = 17-npn-no-client-support-resumption-server
-resume-client = 17-npn-no-client-support-resumption-resume-client
+[19-npn-no-client-support-resumption-ssl]
+server = 19-npn-no-client-support-resumption-server
+client = 19-npn-no-client-support-resumption-client
+resume-server = 19-npn-no-client-support-resumption-server
+resume-client = 19-npn-no-client-support-resumption-resume-client
-[17-npn-no-client-support-resumption-server]
+[19-npn-no-client-support-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[17-npn-no-client-support-resumption-client]
+[19-npn-no-client-support-resumption-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[17-npn-no-client-support-resumption-resume-client]
+[19-npn-no-client-support-resumption-resume-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-17]
+[test-19]
HandshakeMode = Resume
ResumptionExpected = Yes
-server = 17-npn-no-client-support-resumption-server-extra
-resume-server = 17-npn-no-client-support-resumption-server-extra
-client = 17-npn-no-client-support-resumption-client-extra
+server = 19-npn-no-client-support-resumption-server-extra
+resume-server = 19-npn-no-client-support-resumption-server-extra
+client = 19-npn-no-client-support-resumption-client-extra
-[17-npn-no-client-support-resumption-server-extra]
+[19-npn-no-client-support-resumption-server-extra]
NPNProtocols = foo
-[17-npn-no-client-support-resumption-client-extra]
+[19-npn-no-client-support-resumption-client-extra]
NPNProtocols = foo
# ===========================================================
-[18-alpn-preferred-over-npn-resumption]
-ssl_conf = 18-alpn-preferred-over-npn-resumption-ssl
+[20-alpn-preferred-over-npn-resumption]
+ssl_conf = 20-alpn-preferred-over-npn-resumption-ssl
-[18-alpn-preferred-over-npn-resumption-ssl]
-server = 18-alpn-preferred-over-npn-resumption-server
-client = 18-alpn-preferred-over-npn-resumption-client
-resume-server = 18-alpn-preferred-over-npn-resumption-resume-server
-resume-client = 18-alpn-preferred-over-npn-resumption-client
+[20-alpn-preferred-over-npn-resumption-ssl]
+server = 20-alpn-preferred-over-npn-resumption-server
+client = 20-alpn-preferred-over-npn-resumption-client
+resume-server = 20-alpn-preferred-over-npn-resumption-resume-server
+resume-client = 20-alpn-preferred-over-npn-resumption-client
-[18-alpn-preferred-over-npn-resumption-server]
+[20-alpn-preferred-over-npn-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[18-alpn-preferred-over-npn-resumption-resume-server]
+[20-alpn-preferred-over-npn-resumption-resume-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[18-alpn-preferred-over-npn-resumption-client]
+[20-alpn-preferred-over-npn-resumption-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-18]
+[test-20]
ExpectedALPNProtocol = foo
HandshakeMode = Resume
ResumptionExpected = Yes
-server = 18-alpn-preferred-over-npn-resumption-server-extra
-resume-server = 18-alpn-preferred-over-npn-resumption-resume-server-extra
-client = 18-alpn-preferred-over-npn-resumption-client-extra
-resume-client = 18-alpn-preferred-over-npn-resumption-client-extra
+server = 20-alpn-preferred-over-npn-resumption-server-extra
+resume-server = 20-alpn-preferred-over-npn-resumption-resume-server-extra
+client = 20-alpn-preferred-over-npn-resumption-client-extra
+resume-client = 20-alpn-preferred-over-npn-resumption-client-extra
-[18-alpn-preferred-over-npn-resumption-server-extra]
+[20-alpn-preferred-over-npn-resumption-server-extra]
NPNProtocols = bar
-[18-alpn-preferred-over-npn-resumption-resume-server-extra]
+[20-alpn-preferred-over-npn-resumption-resume-server-extra]
ALPNProtocols = foo
NPNProtocols = baz
-[18-alpn-preferred-over-npn-resumption-client-extra]
+[20-alpn-preferred-over-npn-resumption-client-extra]
ALPNProtocols = foo
NPNProtocols = bar,baz
# ===========================================================
-[19-npn-used-if-alpn-not-supported-resumption]
-ssl_conf = 19-npn-used-if-alpn-not-supported-resumption-ssl
+[21-npn-used-if-alpn-not-supported-resumption]
+ssl_conf = 21-npn-used-if-alpn-not-supported-resumption-ssl
-[19-npn-used-if-alpn-not-supported-resumption-ssl]
-server = 19-npn-used-if-alpn-not-supported-resumption-server
-client = 19-npn-used-if-alpn-not-supported-resumption-client
-resume-server = 19-npn-used-if-alpn-not-supported-resumption-resume-server
-resume-client = 19-npn-used-if-alpn-not-supported-resumption-client
+[21-npn-used-if-alpn-not-supported-resumption-ssl]
+server = 21-npn-used-if-alpn-not-supported-resumption-server
+client = 21-npn-used-if-alpn-not-supported-resumption-client
+resume-server = 21-npn-used-if-alpn-not-supported-resumption-resume-server
+resume-client = 21-npn-used-if-alpn-not-supported-resumption-client
-[19-npn-used-if-alpn-not-supported-resumption-server]
+[21-npn-used-if-alpn-not-supported-resumption-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[19-npn-used-if-alpn-not-supported-resumption-resume-server]
+[21-npn-used-if-alpn-not-supported-resumption-resume-server]
Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
CipherString = DEFAULT
PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
-[19-npn-used-if-alpn-not-supported-resumption-client]
+[21-npn-used-if-alpn-not-supported-resumption-client]
CipherString = DEFAULT
MaxProtocol = TLSv1.2
VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
VerifyMode = Peer
-[test-19]
+[test-21]
ExpectedNPNProtocol = baz
HandshakeMode = Resume
ResumptionExpected = Yes
-server = 19-npn-used-if-alpn-not-supported-resumption-server-extra
-resume-server = 19-npn-used-if-alpn-not-supported-resumption-resume-server-extra
-client = 19-npn-used-if-alpn-not-supported-resumption-client-extra
-resume-client = 19-npn-used-if-alpn-not-supported-resumption-client-extra
+server = 21-npn-used-if-alpn-not-supported-resumption-server-extra
+resume-server = 21-npn-used-if-alpn-not-supported-resumption-resume-server-extra
+client = 21-npn-used-if-alpn-not-supported-resumption-client-extra
+resume-client = 21-npn-used-if-alpn-not-supported-resumption-client-extra
-[19-npn-used-if-alpn-not-supported-resumption-server-extra]
+[21-npn-used-if-alpn-not-supported-resumption-server-extra]
ALPNProtocols = foo
NPNProtocols = bar
-[19-npn-used-if-alpn-not-supported-resumption-resume-server-extra]
+[21-npn-used-if-alpn-not-supported-resumption-resume-server-extra]
NPNProtocols = baz
-[19-npn-used-if-alpn-not-supported-resumption-client-extra]
+[21-npn-used-if-alpn-not-supported-resumption-client-extra]
ALPNProtocols = foo
NPNProtocols = bar,baz
diff --git a/test/ssl-tests/08-npn.cnf.in b/test/ssl-tests/08-npn.cnf.in
index 30783e4..1dc2704 100644
--- a/test/ssl-tests/08-npn.cnf.in
+++ b/test/ssl-tests/08-npn.cnf.in
@@ -110,6 +110,41 @@ our @tests = (
"ExpectedNPNProtocol" => undef,
},
},
+ {
+ name => "npn-empty-client-list",
+ server => {
+ extra => {
+ "NPNProtocols" => "foo",
+ },
+ },
+ client => {
+ extra => {
+ "NPNProtocols" => "",
+ },
+ "MaxProtocol" => "TLSv1.2"
+ },
+ test => {
+ "ExpectedResult" => "ClientFail",
+ "ExpectedClientAlert" => "HandshakeFailure"
+ },
+ },
+ {
+ name => "npn-empty-server-list",
+ server => {
+ extra => {
+ "NPNProtocols" => "",
+ },
+ },
+ client => {
+ extra => {
+ "NPNProtocols" => "foo",
+ },
+ "MaxProtocol" => "TLSv1.2"
+ },
+ test => {
+ "ExpectedNPNProtocol" => "foo"
+ },
+ },
{
name => "npn-with-sni-no-context-switch",
server => {
diff --git a/test/ssl-tests/09-alpn.cnf b/test/ssl-tests/09-alpn.cnf
index e7e6cb9..dd66873 100644
--- a/test/ssl-tests/09-alpn.cnf
+++ b/test/ssl-tests/09-alpn.cnf
@@ -1,6 +1,6 @@
# Generated with generate_ssl_tests.pl
-num_tests = 16
+num_tests = 18
test-0 = 0-alpn-simple
test-1 = 1-alpn-server-finds-match
@@ -18,6 +18,8 @@ test-12 = 12-alpn-client-switch-resumption
test-13 = 13-alpn-alert-on-mismatch-resumption
test-14 = 14-alpn-no-server-support-resumption
test-15 = 15-alpn-no-client-support-resumption
+test-16 = 16-alpn-empty-client-list
+test-17 = 17-alpn-empty-server-list
# ===========================================================
[0-alpn-simple]
@@ -617,3 +619,65 @@ ALPNProtocols = foo
ALPNProtocols = foo
+# ===========================================================
+
+[16-alpn-empty-client-list]
+ssl_conf = 16-alpn-empty-client-list-ssl
+
+[16-alpn-empty-client-list-ssl]
+server = 16-alpn-empty-client-list-server
+client = 16-alpn-empty-client-list-client
+
+[16-alpn-empty-client-list-server]
+Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
+CipherString = DEFAULT
+PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
+
+[16-alpn-empty-client-list-client]
+CipherString = DEFAULT
+VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
+VerifyMode = Peer
+
+[test-16]
+server = 16-alpn-empty-client-list-server-extra
+client = 16-alpn-empty-client-list-client-extra
+
+[16-alpn-empty-client-list-server-extra]
+ALPNProtocols = foo
+
+[16-alpn-empty-client-list-client-extra]
+ALPNProtocols =
+
+
+# ===========================================================
+
+[17-alpn-empty-server-list]
+ssl_conf = 17-alpn-empty-server-list-ssl
+
+[17-alpn-empty-server-list-ssl]
+server = 17-alpn-empty-server-list-server
+client = 17-alpn-empty-server-list-client
+
+[17-alpn-empty-server-list-server]
+Certificate = ${ENV::TEST_CERTS_DIR}/servercert.pem
+CipherString = DEFAULT
+PrivateKey = ${ENV::TEST_CERTS_DIR}/serverkey.pem
+
+[17-alpn-empty-server-list-client]
+CipherString = DEFAULT
+VerifyCAFile = ${ENV::TEST_CERTS_DIR}/rootcert.pem
+VerifyMode = Peer
+
+[test-17]
+ExpectedResult = ServerFail
+ExpectedServerAlert = NoApplicationProtocol
+server = 17-alpn-empty-server-list-server-extra
+client = 17-alpn-empty-server-list-client-extra
+
+[17-alpn-empty-server-list-server-extra]
+ALPNProtocols =
+
+[17-alpn-empty-server-list-client-extra]
+ALPNProtocols = foo
+
+
diff --git a/test/ssl-tests/09-alpn.cnf.in b/test/ssl-tests/09-alpn.cnf.in
index 8133075..322b709 100644
--- a/test/ssl-tests/09-alpn.cnf.in
+++ b/test/ssl-tests/09-alpn.cnf.in
@@ -322,4 +322,37 @@ our @tests = (
"ExpectedALPNProtocol" => undef,
},
},
+ {
+ name => "alpn-empty-client-list",
+ server => {
+ extra => {
+ "ALPNProtocols" => "foo",
+ },
+ },
+ client => {
+ extra => {
+ "ALPNProtocols" => "",
+ },
+ },
+ test => {
+ "ExpectedALPNProtocol" => undef,
+ },
+ },
+ {
+ name => "alpn-empty-server-list",
+ server => {
+ extra => {
+ "ALPNProtocols" => "",
+ },
+ },
+ client => {
+ extra => {
+ "ALPNProtocols" => "foo",
+ },
+ },
+ test => {
+ "ExpectedResult" => "ServerFail",
+ "ExpectedServerAlert" => "NoApplicationProtocol",
+ },
+ },
);
diff --git a/test/sslapitest.c b/test/sslapitest.c
index e8d105e..e14a93b 100644
--- a/test/sslapitest.c
+++ b/test/sslapitest.c
@@ -10713,6 +10713,363 @@ static int test_multi_resume(int idx)
return testresult;
}
+static struct next_proto_st {
+ int serverlen;
+ unsigned char server[40];
+ int clientlen;
+ unsigned char client[40];
+ int expected_ret;
+ size_t selectedlen;
+ unsigned char selected[40];
+} next_proto_tests[] = {
+ {
+ 4, { 3, 'a', 'b', 'c' },
+ 4, { 3, 'a', 'b', 'c' },
+ OPENSSL_NPN_NEGOTIATED,
+ 3, { 'a', 'b', 'c' }
+ },
+ {
+ 7, { 3, 'a', 'b', 'c', 2, 'a', 'b' },
+ 4, { 3, 'a', 'b', 'c' },
+ OPENSSL_NPN_NEGOTIATED,
+ 3, { 'a', 'b', 'c' }
+ },
+ {
+ 7, { 2, 'a', 'b', 3, 'a', 'b', 'c', },
+ 4, { 3, 'a', 'b', 'c' },
+ OPENSSL_NPN_NEGOTIATED,
+ 3, { 'a', 'b', 'c' }
+ },
+ {
+ 4, { 3, 'a', 'b', 'c' },
+ 7, { 3, 'a', 'b', 'c', 2, 'a', 'b', },
+ OPENSSL_NPN_NEGOTIATED,
+ 3, { 'a', 'b', 'c' }
+ },
+ {
+ 4, { 3, 'a', 'b', 'c' },
+ 7, { 2, 'a', 'b', 3, 'a', 'b', 'c'},
+ OPENSSL_NPN_NEGOTIATED,
+ 3, { 'a', 'b', 'c' }
+ },
+ {
+ 7, { 2, 'b', 'c', 3, 'a', 'b', 'c' },
+ 7, { 2, 'a', 'b', 3, 'a', 'b', 'c'},
+ OPENSSL_NPN_NEGOTIATED,
+ 3, { 'a', 'b', 'c' }
+ },
+ {
+ 10, { 2, 'b', 'c', 3, 'a', 'b', 'c', 2, 'a', 'b' },
+ 7, { 2, 'a', 'b', 3, 'a', 'b', 'c'},
+ OPENSSL_NPN_NEGOTIATED,
+ 3, { 'a', 'b', 'c' }
+ },
+ {
+ 4, { 3, 'b', 'c', 'd' },
+ 4, { 3, 'a', 'b', 'c' },
+ OPENSSL_NPN_NO_OVERLAP,
+ 3, { 'a', 'b', 'c' }
+ },
+ {
+ 0, { 0 },
+ 4, { 3, 'a', 'b', 'c' },
+ OPENSSL_NPN_NO_OVERLAP,
+ 3, { 'a', 'b', 'c' }
+ },
+ {
+ -1, { 0 },
+ 4, { 3, 'a', 'b', 'c' },
+ OPENSSL_NPN_NO_OVERLAP,
+ 3, { 'a', 'b', 'c' }
+ },
+ {
+ 4, { 3, 'a', 'b', 'c' },
+ 0, { 0 },
+ OPENSSL_NPN_NO_OVERLAP,
+ 0, { 0 }
+ },
+ {
+ 4, { 3, 'a', 'b', 'c' },
+ -1, { 0 },
+ OPENSSL_NPN_NO_OVERLAP,
+ 0, { 0 }
+ },
+ {
+ 3, { 3, 'a', 'b', 'c' },
+ 4, { 3, 'a', 'b', 'c' },
+ OPENSSL_NPN_NO_OVERLAP,
+ 3, { 'a', 'b', 'c' }
+ },
+ {
+ 4, { 3, 'a', 'b', 'c' },
+ 3, { 3, 'a', 'b', 'c' },
+ OPENSSL_NPN_NO_OVERLAP,
+ 0, { 0 }
+ }
+};
+
+static int test_select_next_proto(int idx)
+{
+ struct next_proto_st *np = &next_proto_tests[idx];
+ int ret = 0;
+ unsigned char *out, *client, *server;
+ unsigned char outlen;
+ unsigned int clientlen, serverlen;
+
+ if (np->clientlen == -1) {
+ client = NULL;
+ clientlen = 0;
+ } else {
+ client = np->client;
+ clientlen = (unsigned int)np->clientlen;
+ }
+ if (np->serverlen == -1) {
+ server = NULL;
+ serverlen = 0;
+ } else {
+ server = np->server;
+ serverlen = (unsigned int)np->serverlen;
+ }
+
+ if (!TEST_int_eq(SSL_select_next_proto(&out, &outlen, server, serverlen,
+ client, clientlen),
+ np->expected_ret))
+ goto err;
+
+ if (np->selectedlen == 0) {
+ if (!TEST_ptr_null(out) || !TEST_uchar_eq(outlen, 0))
+ goto err;
+ } else {
+ if (!TEST_mem_eq(out, outlen, np->selected, np->selectedlen))
+ goto err;
+ }
+
+ ret = 1;
+ err:
+ return ret;
+}
+
+static const unsigned char fooprot[] = {3, 'f', 'o', 'o' };
+static const unsigned char barprot[] = {3, 'b', 'a', 'r' };
+
+#if !defined(OPENSSL_NO_TLS1_2) && !defined(OPENSSL_NO_NEXTPROTONEG)
+static int npn_advert_cb(SSL *ssl, const unsigned char **out,
+ unsigned int *outlen, void *arg)
+{
+ int *idx = (int *)arg;
+
+ switch (*idx) {
+ default:
+ case 0:
+ *out = fooprot;
+ *outlen = sizeof(fooprot);
+ return SSL_TLSEXT_ERR_OK;
+
+ case 1:
+ *outlen = 0;
+ return SSL_TLSEXT_ERR_OK;
+
+ case 2:
+ return SSL_TLSEXT_ERR_NOACK;
+ }
+}
+
+static int npn_select_cb(SSL *s, unsigned char **out, unsigned char *outlen,
+ const unsigned char *in, unsigned int inlen, void *arg)
+{
+ int *idx = (int *)arg;
+
+ switch (*idx) {
+ case 0:
+ case 1:
+ *out = (unsigned char *)(fooprot + 1);
+ *outlen = *fooprot;
+ return SSL_TLSEXT_ERR_OK;
+
+ case 3:
+ *out = (unsigned char *)(barprot + 1);
+ *outlen = *barprot;
+ return SSL_TLSEXT_ERR_OK;
+
+ case 4:
+ *outlen = 0;
+ return SSL_TLSEXT_ERR_OK;
+
+ default:
+ case 2:
+ return SSL_TLSEXT_ERR_ALERT_FATAL;
+ }
+}
+
+/*
+ * Test the NPN callbacks
+ * Test 0: advert = foo, select = foo
+ * Test 1: advert = <empty>, select = foo
+ * Test 2: no advert
+ * Test 3: advert = foo, select = bar
+ * Test 4: advert = foo, select = <empty> (should fail)
+ */
+static int test_npn(int idx)
+{
+ SSL_CTX *sctx = NULL, *cctx = NULL;
+ SSL *serverssl = NULL, *clientssl = NULL;
+ int testresult = 0;
+
+ if (!TEST_true(create_ssl_ctx_pair(libctx, TLS_server_method(),
+ TLS_client_method(), 0, TLS1_2_VERSION,
+ &sctx, &cctx, cert, privkey)))
+ goto end;
+
+ SSL_CTX_set_next_protos_advertised_cb(sctx, npn_advert_cb, &idx);
+ SSL_CTX_set_next_proto_select_cb(cctx, npn_select_cb, &idx);
+
+ if (!TEST_true(create_ssl_objects(sctx, cctx, &serverssl, &clientssl, NULL,
+ NULL)))
+ goto end;
+
+ if (idx == 4) {
+ /* We don't allow empty selection of NPN, so this should fail */
+ if (!TEST_false(create_ssl_connection(serverssl, clientssl,
+ SSL_ERROR_NONE)))
+ goto end;
+ } else {
+ const unsigned char *prot;
+ unsigned int protlen;
+
+ if (!TEST_true(create_ssl_connection(serverssl, clientssl,
+ SSL_ERROR_NONE)))
+ goto end;
+
+ SSL_get0_next_proto_negotiated(serverssl, &prot, &protlen);
+ switch (idx) {
+ case 0:
+ case 1:
+ if (!TEST_mem_eq(prot, protlen, fooprot + 1, *fooprot))
+ goto end;
+ break;
+ case 2:
+ if (!TEST_uint_eq(protlen, 0))
+ goto end;
+ break;
+ case 3:
+ if (!TEST_mem_eq(prot, protlen, barprot + 1, *barprot))
+ goto end;
+ break;
+ default:
+ TEST_error("Should not get here");
+ goto end;
+ }
+ }
+
+ testresult = 1;
+ end:
+ SSL_free(serverssl);
+ SSL_free(clientssl);
+
+ return testresult;
+}
+#endif /* !defined(OPENSSL_NO_TLS1_2) && !defined(OPENSSL_NO_NEXTPROTONEG) */
+
+static int alpn_select_cb2(SSL *ssl, const unsigned char **out,
+ unsigned char *outlen, const unsigned char *in,
+ unsigned int inlen, void *arg)
+{
+ int *idx = (int *)arg;
+
+ switch (*idx) {
+ case 0:
+ *out = (unsigned char *)(fooprot + 1);
+ *outlen = *fooprot;
+ return SSL_TLSEXT_ERR_OK;
+
+ case 2:
+ *out = (unsigned char *)(barprot + 1);
+ *outlen = *barprot;
+ return SSL_TLSEXT_ERR_OK;
+
+ case 3:
+ *outlen = 0;
+ return SSL_TLSEXT_ERR_OK;
+
+ default:
+ case 1:
+ return SSL_TLSEXT_ERR_ALERT_FATAL;
+ }
+ return 0;
+}
+
+/*
+ * Test the ALPN callbacks
+ * Test 0: client = foo, select = foo
+ * Test 1: client = <empty>, select = none
+ * Test 2: client = foo, select = bar (should fail)
+ * Test 3: client = foo, select = <empty> (should fail)
+ */
+static int test_alpn(int idx)
+{
+ SSL_CTX *sctx = NULL, *cctx = NULL;
+ SSL *serverssl = NULL, *clientssl = NULL;
+ int testresult = 0;
+ const unsigned char *prots = fooprot;
+ unsigned int protslen = sizeof(fooprot);
+
+ if (!TEST_true(create_ssl_ctx_pair(libctx, TLS_server_method(),
+ TLS_client_method(), 0, 0,
+ &sctx, &cctx, cert, privkey)))
+ goto end;
+
+ SSL_CTX_set_alpn_select_cb(sctx, alpn_select_cb2, &idx);
+
+ if (!TEST_true(create_ssl_objects(sctx, cctx, &serverssl, &clientssl, NULL,
+ NULL)))
+ goto end;
+
+ if (idx == 1) {
+ prots = NULL;
+ protslen = 0;
+ }
+
+ /* SSL_set_alpn_protos returns 0 for success! */
+ if (!TEST_false(SSL_set_alpn_protos(clientssl, prots, protslen)))
+ goto end;
+
+ if (idx == 2 || idx == 3) {
+ /* We don't allow empty selection of NPN, so this should fail */
+ if (!TEST_false(create_ssl_connection(serverssl, clientssl,
+ SSL_ERROR_NONE)))
+ goto end;
+ } else {
+ const unsigned char *prot;
+ unsigned int protlen;
+
+ if (!TEST_true(create_ssl_connection(serverssl, clientssl,
+ SSL_ERROR_NONE)))
+ goto end;
+
+ SSL_get0_alpn_selected(clientssl, &prot, &protlen);
+ switch (idx) {
+ case 0:
+ if (!TEST_mem_eq(prot, protlen, fooprot + 1, *fooprot))
+ goto end;
+ break;
+ case 1:
+ if (!TEST_uint_eq(protlen, 0))
+ goto end;
+ break;
+ default:
+ TEST_error("Should not get here");
+ goto end;
+ }
+ }
+
+ testresult = 1;
+ end:
+ SSL_free(serverssl);
+ SSL_free(clientssl);
+
+ return testresult;
+}
+
OPT_TEST_DECLARE_USAGE("certfile privkeyfile srpvfile tmpfile provider config dhfile\n")
int setup_tests(void)
@@ -10989,6 +11346,11 @@ int setup_tests(void)
#endif
ADD_ALL_TESTS(test_handshake_retry, 16);
ADD_ALL_TESTS(test_multi_resume, 5);
+ ADD_ALL_TESTS(test_select_next_proto, OSSL_NELEM(next_proto_tests));
+#if !defined(OPENSSL_NO_TLS1_2) && !defined(OPENSSL_NO_NEXTPROTONEG)
+ ADD_ALL_TESTS(test_npn, 5);
+#endif
+ ADD_ALL_TESTS(test_alpn, 4);
return 1;
err:
diff --git a/util/perl/TLSProxy/Message.pm b/util/perl/TLSProxy/Message.pm
index 2c1bdb3..eb350de 100644
--- a/util/perl/TLSProxy/Message.pm
+++ b/util/perl/TLSProxy/Message.pm
@@ -379,6 +379,15 @@ sub create_message
[@message_frag_lens]
);
$message->parse();
+ } elsif ($mt == MT_NEXT_PROTO) {
+ $message = TLSProxy::NextProto->new(
+ $server,
+ $data,
+ [@message_rec_list],
+ $startoffset,
+ [@message_frag_lens]
+ );
+ $message->parse();
} else {
#Unknown message type
$message = TLSProxy::Message->new(
diff --git a/util/perl/TLSProxy/NextProto.pm b/util/perl/TLSProxy/NextProto.pm
new file mode 100644
index 0000000..3f7af72
--- /dev/null
+++ b/util/perl/TLSProxy/NextProto.pm
@@ -0,0 +1,54 @@
+# Copyright 2024 The OpenSSL Project Authors. All Rights Reserved.
+#
+# Licensed under the Apache License 2.0 (the "License"). You may not use
+# this file except in compliance with the License. You can obtain a copy
+# in the file LICENSE in the source distribution or at
+# https://www.openssl.org/source/license.html
+
+use strict;
+
+package TLSProxy::NextProto;
+
+use vars '@ISA';
+push @ISA, 'TLSProxy::Message';
+
+sub new
+{
+ my $class = shift;
+ my ($server,
+ $data,
+ $records,
+ $startoffset,
+ $message_frag_lens) = @_;
+
+ my $self = $class->SUPER::new(
+ $server,
+ TLSProxy::Message::MT_NEXT_PROTO,
+ $data,
+ $records,
+ $startoffset,
+ $message_frag_lens);
+
+ return $self;
+}
+
+sub parse
+{
+ #We don't support parsing at the moment
+}
+
+# This is supposed to reconstruct the on-the-wire message data following changes.
+# For now though since we don't support parsing we just create an empty NextProto
+# message - this capability is used in test_npn
+sub set_message_contents
+{
+ my $self = shift;
+ my $data;
+
+ $data = pack("C32", 0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00);
+ $self->data($data);
+}
+1;
diff --git a/util/perl/TLSProxy/Proxy.pm b/util/perl/TLSProxy/Proxy.pm
index 3de10ec..b707722 100644
--- a/util/perl/TLSProxy/Proxy.pm
+++ b/util/perl/TLSProxy/Proxy.pm
@@ -23,6 +23,7 @@ use TLSProxy::CertificateRequest;
use TLSProxy::CertificateVerify;
use TLSProxy::ServerKeyExchange;
use TLSProxy::NewSessionTicket;
+use TLSProxy::NextProto;
my $have_IPv6;
my $IP_factory;
--
2.41.0
此处可能存在不合适展示的内容，页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容，可点击提交进行申诉，我们将尽快为您处理。
马建仓 AI 助手