-- Dump RTP SILK payload to raw file
-- According to draft-spittka-silk-payload-format-00 RFC3550 to dissector payload of RTP to NALU
-- Write it to from<sourceIp_sourcePort>to<dstIp_dstPort> file.
--   +------------------+
--   | Header           |
--   +-----------+------+
--   | block 1   |
--   +--------------+--+
--   : ...             :
--   +--------------+--+
--   | block n         |
--   +-----------------+
-- The header is "#!SILK_V3", and block struction
--   +------------------+
--   |  len  |  payload |
--   +------------------+
-- You can access this feature by menu "Tools"
-- Author: Yang Xing (hongch_911@126.com)
------------------------------------------------------------------------------------------------
do
    -- 解析为SILK音频部分
    local proto_silk = Proto("silk", "Audio SILK")

    -- Wireshark对每个相关数据包调用该函数
    -- tvb:Testy Virtual Buffer报文缓存; pinfo:packet infomarmation报文信息; treeitem:解析树节点
    function proto_silk.dissector(tvb, pinfo, tree)
        -- add proto item to tree
        local proto_tree = tree:add(proto_silk, tvb())
        proto_tree:append_text(string.format(" (Len: %d)",tvb:len()))
        pinfo.columns.protocol = "SILK"
    end

    -- set this protocal preferences
    local prefs = proto_silk.prefs
    prefs.dyn_pt = Pref.range("SILK dynamic payload type", "", "Dynamic payload types which will be interpreted as SILK; Values must be in the range 96 - 127", 127)

    -- register this dissector to dynamic payload type dissectorTable
    local dyn_payload_type_table = DissectorTable.get("rtp_dyn_payload_type")
    dyn_payload_type_table:add("silk", proto_silk)

    -- register this dissector to specific payload type (specified in preferences windows)
    local payload_type_table = DissectorTable.get("rtp.pt")
    local old_dyn_pt = nil
    local old_dissector = nil
    
    function proto_silk.init()
        if (prefs.dyn_pt ~= old_dyn_pt) then
            -- reset old dissector
            if (old_dyn_pt ~= nil and string.len(old_dyn_pt) > 0) then
                local pt_numbers = getArray(tostring(old_dyn_pt))
                for index,pt_number in pairs(pt_numbers) do
                    -- replace this proto with old proto on old payload type
                    if old_dissector ~= nil and old_dissector[index] ~= nil then
                        payload_type_table:add(pt_number, old_dissector[index])
                    else -- just remove this proto
                        payload_type_table:remove(pt_number, proto_silk)
                    end
                end
            end
            
            old_dyn_pt = prefs.dyn_pt  -- save current payload type's dissector
            
            if (prefs.dyn_pt ~= nil and string.len(prefs.dyn_pt) > 0) then
                local pt_numbers = getArray(tostring(prefs.dyn_pt))
                old_dissector = {}
                for index,pt_number in pairs(pt_numbers) do
                    local dissector = payload_type_table:get_dissector(pt_number)
                    -- table.insert(old_dissector,index,dissector)
                    old_dissector[index] = dissector
                    payload_type_table:add(pt_number, proto_silk)
                end
            end
        end
    end

    function getArray(str)
        local strList = {}
        string.gsub(str, '[^,]+',function (w)
            local pos = string.find(w,'-')
            if not pos then
                table.insert(strList,tonumber(w))
            else
                local begin_index = string.sub(w,1,pos-1)
                local end_index = string.sub(w,pos+1,#w)
                for index = begin_index,end_index do
                    table.insert(strList,index)
                end
            end
        end)
        return strList
    end

    function get_temp_path()
        local tmp = nil
        if tmp == nil or tmp == '' then
            tmp = os.getenv('HOME')
            if tmp == nil or tmp == '' then
                tmp = os.getenv('USERPROFILE')
                if tmp == nil or tmp == '' then
                    tmp = persconffile_path('temp')
                else
                    tmp = tmp .. "/wireshark_temp"
                end
            else
                tmp = tmp .. "/wireshark_temp"
            end
        end
        return tmp
    end

    -- 导出数据到文件部分
    -- for geting data (the field's value is type of ByteArray)
    local f_data = Field.new("silk")

    local filter_string = nil

    -- menu action. When you click "Tools" will run this function
    local function export_data_to_file()
        -- window for showing information
        local tw = TextWindow.new("Export File Info Win")
        
        -- add message to information window
        function twappend(str)
            tw:append(str)
            tw:append("\n")
        end

        -- temp path
        local temp_path = get_temp_path()
        
        -- variable for storing rtp stream and dumping parameters
        local stream_infos = nil

        -- trigered by all ps packats
        local list_filter = ''
        if filter_string == nil or filter_string == '' then
            list_filter = "silk"
        elseif string.find(filter_string,"silk")~=nil then
            list_filter = filter_string
        else
            list_filter = "silk && "..filter_string
        end
        twappend("Listener filter: " .. list_filter .. "\n")
        local my_tap = Listener.new("frame", list_filter)
        
        -- get rtp stream info by src and dst address
        function get_stream_info(pinfo)
            local key = "from_" .. tostring(pinfo.src) .. "_" .. tostring(pinfo.src_port) .. "_to_" .. tostring(pinfo.dst) .. "_" .. tostring(pinfo.dst_port)
            key = key:gsub(":", ".")
            local stream_info = stream_infos[key]
            if not stream_info then -- if not exists, create one
                stream_info = { }
                stream_info.filename = key.. ".silk"
                -- stream_info.file = io.open(stream_info.filename, "wb")
                if not Dir.exists(temp_path) then
                    Dir.make(temp_path)
                end
                stream_info.filepath = temp_path.."/"..stream_info.filename
                stream_info.file,msg = io.open(temp_path.."/"..stream_info.filename, "wb")
                if msg then
                    twappend("io.open "..stream_info.filepath..", error "..msg)
                end
                stream_info.file:write("\x02\x23\x21\x53\x49\x4C\x4B\x5F\x56\x33")  -- #!SILK_V3 first 02 is for wx
                stream_infos[key] = stream_info
                twappend("Ready to export data (RTP from " .. tostring(pinfo.src) .. ":" .. tostring(pinfo.src_port) 
                         .. " to " .. tostring(pinfo.dst) .. ":" .. tostring(pinfo.dst_port) .. " write to file:[" .. stream_info.filename .. "] ...\n")
            end
            return stream_info
        end
        
        -- write data to file.
        local function write_to_file(stream_info, data_bytes)
            local len = data_bytes:len()
            local b1=string.char(len%256) len=(len-len%256)/256
            local b2=string.char(len%256) len=(len-len%256)/256
            stream_info.file:write(b1,b2)
            stream_info.file:write(data_bytes:raw())
        end
        
        -- call this function if a packet contains ps payload
        function my_tap.packet(pinfo,tvb)
            if stream_infos == nil then
                -- not triggered by button event, so do nothing.
                return
            end
            local datas = { f_data() } -- using table because one packet may contains more than one RTP
            
            for i,data_f in ipairs(datas) do
                if data_f.len < 1 then
                    return
                end
                local data = data_f.range:bytes()
                local stream_info = get_stream_info(pinfo)
                write_to_file(stream_info, data)
            end
        end
        
        -- close all open files
        local function close_all_files()
            if stream_infos then
                local no_streams = true
                for id,stream in pairs(stream_infos) do
                    if stream and stream.file then
                        stream.file:flush()
                        stream.file:close()
                        stream.file = nil
                        twappend("File [" .. stream.filename .. "] generated OK!")
                        no_streams = false
                    end
                end
                
                if no_streams then
                    twappend("Not found any Data over RTP streams!")
                else
                    tw:add_button("Browser", function () browser_open_data_file(temp_path) end)
                end
            end
        end
        
        function my_tap.reset()
            -- do nothing now
        end
        
        tw:set_atclose(function ()
            my_tap:remove()
            if Dir.exists(temp_path) then
                Dir.remove_all(temp_path)
            end
        end)
        
        local function export_data()
            stream_infos = {}
            retap_packets()
            close_all_files()
            stream_infos = nil
        end
        
        tw:add_button("Export All", function ()
            export_data()
        end)

        tw:add_button("Set Filter", function ()
            tw:close()
            dialog_menu()
        end)
    end

    local function dialog_func(str)
        filter_string = str
        export_data_to_file()
    end

    function dialog_menu()
        new_dialog("Filter Dialog",dialog_func,"Filter")
    end

    local function dialog_default()
        filter_string = get_filter()
        export_data_to_file()
    end
    
    -- Find this feature in menu "Tools"
    register_menu("Audio/Export SILK", dialog_default, MENU_TOOLS_UNSORTED)
end