代码拉取完成,页面将自动刷新
#!/usr/bin/env zsh
##############################################################################
#
# Copyright (c) 2009 Peter Stephenson
# Copyright (c) 2011 Guido van Steen
# Copyright (c) 2011 Suraj N. Kurapati
# Copyright (c) 2011 Sorin Ionescu
# Copyright (c) 2011 Vincent Guerci
# Copyright (c) 2016 Geza Lore
# Copyright (c) 2017 Bengt Brodersen
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
#
# * Neither the name of the FIZSH nor the names of its contributors
# may be used to endorse or promote products derived from this
# software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
##############################################################################
#-----------------------------------------------------------------------------
# declare global configuration variables
#-----------------------------------------------------------------------------
: ${HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND='bg=magenta,fg=white,bold'}
: ${HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_NOT_FOUND='bg=red,fg=white,bold'}
: ${HISTORY_SUBSTRING_SEARCH_GLOBBING_FLAGS='i'}
: ${HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE=''}
: ${HISTORY_SUBSTRING_SEARCH_FUZZY=''}
: ${HISTORY_SUBSTRING_SEARCH_PREFIXED=''}
#-----------------------------------------------------------------------------
# declare internal global variables
#-----------------------------------------------------------------------------
typeset -g BUFFER MATCH MBEGIN MEND CURSOR
typeset -g _history_substring_search_refresh_display
typeset -g _history_substring_search_query_highlight
typeset -g _history_substring_search_result
typeset -g _history_substring_search_query
typeset -g -a _history_substring_search_query_parts
typeset -g -a _history_substring_search_raw_matches
typeset -g -i _history_substring_search_raw_match_index
typeset -g -a _history_substring_search_matches
typeset -g -i _history_substring_search_match_index
typeset -g -A _history_substring_search_unique_filter
typeset -g -i _history_substring_search_zsh_5_9
#-----------------------------------------------------------------------------
# the main ZLE widgets
#-----------------------------------------------------------------------------
history-substring-search-up() {
_history-substring-search-begin
_history-substring-search-up-history ||
_history-substring-search-up-buffer ||
_history-substring-search-up-search
_history-substring-search-end
}
history-substring-search-down() {
_history-substring-search-begin
_history-substring-search-down-history ||
_history-substring-search-down-buffer ||
_history-substring-search-down-search
_history-substring-search-end
}
zle -N history-substring-search-up
zle -N history-substring-search-down
#-----------------------------------------------------------------------------
# implementation details
#-----------------------------------------------------------------------------
zmodload -F zsh/parameter
autoload -Uz is-at-least
if is-at-least 5.9 $ZSH_VERSION; then
_history_substring_search_zsh_5_9=1
fi
#
# We have to "override" some keys and widgets if the
# zsh-syntax-highlighting plugin has not been loaded:
#
# https://github.com/nicoulaj/zsh-syntax-highlighting
#
if [[ $+functions[_zsh_highlight] -eq 0 ]]; then
#
# Dummy implementation of _zsh_highlight() that
# simply removes any existing highlights when the
# user inserts printable characters into $BUFFER.
#
_zsh_highlight() {
if [[ $KEYS == [[:print:]] ]]; then
region_highlight=()
fi
}
#
# Check if $1 denotes the name of a callable function, i.e. it is fully
# defined or it is marked for autoloading and autoloading it at the first
# call to it will succeed. In particular, if $1 has been marked for
# autoloading but is not available in $fpath, then it will return 1 (false).
#
# This is based on the zsh-syntax-highlighting plugin.
#
_history-substring-search-function-callable() {
if (( ${+functions[$1]} )) && ! [[ "$functions[$1]" == *"builtin autoload -X"* ]]; then
return 0 # already fully loaded
else
# "$1" is either an autoload stub, or not a function at all.
# We expect 'autoload +X' to return non-zero if it fails to fully load
# the function.
( autoload -U +X -- "$1" 2>/dev/null )
return $?
fi
}
#
# The zsh-syntax-highlighting plugin uses zle-line-pre-redraw hook instead
# of the legacy "bind all widgets" if 1) zsh has the memo= feature (added in
# version 5.9) and 2) add-zle-hook-widget is available.
#
if [[ $_history_substring_search_zsh_5_9 -eq 1 ]] && _history-substring-search-function-callable add-zle-hook-widget; then
#
# The following code is based on the zsh-syntax-highlighting plugin.
#
autoload -U add-zle-hook-widget
_history-substring-search-zle-line-finish() {
#
# Reset $WIDGET since the 'main' highlighter depends on it.
#
# Since $WIDGET is declared by zle as read-only in this function's scope,
# a nested function is required in order to shadow its built-in value;
# see "User-defined widgets" in zshall.
#
() {
local -h -r WIDGET=zle-line-finish
_zsh_highlight
}
}
_history-substring-search-zle-line-pre-redraw() {
#
# If the zsh-syntax-highlighting plugin has been loaded (after our plugin
# plugin, otherwise this hook wouldn't be called), remove our hooks.
#
if [[ $+ZSH_HIGHLIGHT_VERSION -eq 1 ]]; then
autoload -U add-zle-hook-widget
add-zle-hook-widget -d zle-line-pre-redraw _history-substring-search-zle-line-pre-redraw
add-zle-hook-widget -d zle-line-finish _history-substring-search-zle-line-finish
return 0
fi
#
# Set $? to 0 for _zsh_highlight. Without this, subsequent
# zle-line-pre-redraw hooks won't run, since add-zle-hook-widget happens to
# call us with $? == 1 in the common case.
#
true && _zsh_highlight "$@"
}
if [[ -o zle ]]; then
add-zle-hook-widget zle-line-pre-redraw _history-substring-search-zle-line-pre-redraw
add-zle-hook-widget zle-line-finish _history-substring-search-zle-line-finish
fi
else
#
# The following snippet was taken from the zsh-syntax-highlighting project:
# https://github.com/zsh-users/zsh-syntax-highlighting/blob/56b134f5d62ae3d4e66c7f52bd0cc2595f9b305b/zsh-syntax-highlighting.zsh#L126-161
#
# SPDX-SnippetBegin
# SPDX-License-Identifier: BSD-3-Clause
# SPDX-SnippetCopyrightText: 2010-2011 zsh-syntax-highlighting contributors
#--------------8<-------------------8<-------------------8<-----------------
# Rebind all ZLE widgets to make them invoke _zsh_highlights.
_zsh_highlight_bind_widgets()
{
# Load ZSH module zsh/zleparameter, needed to override user defined widgets.
zmodload zsh/zleparameter 2>/dev/null || {
echo 'zsh-syntax-highlighting: failed loading zsh/zleparameter.' >&2
return 1
}
# Override ZLE widgets to make them invoke _zsh_highlight.
local cur_widget
for cur_widget in ${${(f)"$(builtin zle -la)"}:#(.*|_*|orig-*|run-help|which-command|beep|yank*)}; do
case $widgets[$cur_widget] in
# Already rebound event: do nothing.
user:$cur_widget|user:_zsh_highlight_widget_*);;
# User defined widget: override and rebind old one with prefix "orig-".
user:*) eval "zle -N orig-$cur_widget ${widgets[$cur_widget]#*:}; \
_zsh_highlight_widget_$cur_widget() { builtin zle orig-$cur_widget -- \"\$@\" && _zsh_highlight }; \
zle -N $cur_widget _zsh_highlight_widget_$cur_widget";;
# Completion widget: override and rebind old one with prefix "orig-".
completion:*) eval "zle -C orig-$cur_widget ${${widgets[$cur_widget]#*:}/:/ }; \
_zsh_highlight_widget_$cur_widget() { builtin zle orig-$cur_widget -- \"\$@\" && _zsh_highlight }; \
zle -N $cur_widget _zsh_highlight_widget_$cur_widget";;
# Builtin widget: override and make it call the builtin ".widget".
builtin) eval "_zsh_highlight_widget_$cur_widget() { builtin zle .$cur_widget -- \"\$@\" && _zsh_highlight }; \
zle -N $cur_widget _zsh_highlight_widget_$cur_widget";;
# Default: unhandled case.
*) echo "zsh-syntax-highlighting: unhandled ZLE widget '$cur_widget'" >&2 ;;
esac
done
}
#-------------->8------------------->8------------------->8-----------------
# SPDX-SnippetEnd
_zsh_highlight_bind_widgets
fi
unfunction _history-substring-search-function-callable
fi
_history-substring-search-begin() {
setopt localoptions extendedglob
_history_substring_search_refresh_display=
_history_substring_search_query_highlight=
#
# If the buffer is the same as the previously displayed history substring
# search result, then just keep stepping through the match list. Otherwise
# start a new search.
#
if [[ -n $BUFFER && $BUFFER == ${_history_substring_search_result:-} ]]; then
return;
fi
#
# Clear the previous result.
#
_history_substring_search_result=''
if [[ -z $BUFFER ]]; then
#
# If the buffer is empty, we will just act like up-history/down-history
# in ZSH, so we do not need to actually search the history. This should
# speed things up a little.
#
_history_substring_search_query=
_history_substring_search_query_parts=()
_history_substring_search_raw_matches=()
else
#
# For the purpose of highlighting we keep a copy of the original
# query string.
#
_history_substring_search_query=$BUFFER
#
# compose search pattern
#
if [[ -n $HISTORY_SUBSTRING_SEARCH_FUZZY ]]; then
#
# `=` split string in arguments
#
_history_substring_search_query_parts=(${=_history_substring_search_query})
else
_history_substring_search_query_parts=(${==_history_substring_search_query})
fi
#
# Escape and join query parts with wildcard character '*' as seperator
# `(j:CHAR:)` join array to string with CHAR as seperator
#
local search_pattern="${(j:*:)_history_substring_search_query_parts[@]//(#m)[\][()|\\*?#<>~^]/\\$MATCH}*"
#
# Support anchoring history search to the beginning of the command
#
if [[ -z $HISTORY_SUBSTRING_SEARCH_PREFIXED ]]; then
search_pattern="*${search_pattern}"
fi
#
# Find all occurrences of the search pattern in the history file.
#
# (k) returns the "keys" (history index numbers) instead of the values
# (R) returns values in reverse older, so the index of the youngest
# matching history entry is at the head of the list.
#
_history_substring_search_raw_matches=(${(k)history[(R)(#$HISTORY_SUBSTRING_SEARCH_GLOBBING_FLAGS)${search_pattern}]})
fi
#
# In order to stay as responsive as possible, we will process the raw
# matches lazily (when the user requests the next match) to choose items
# that need to be displayed to the user.
# _history_substring_search_raw_match_index holds the index of the last
# unprocessed entry in _history_substring_search_raw_matches. Any items
# that need to be displayed will be added to
# _history_substring_search_matches.
#
# We use an associative array (_history_substring_search_unique_filter) as
# a 'set' data structure to ensure uniqueness of the results if desired.
# If an entry (key) is in the set (non-empty value), then we have already
# added that entry to _history_substring_search_matches.
#
_history_substring_search_raw_match_index=0
_history_substring_search_matches=()
_history_substring_search_unique_filter=()
#
# If $_history_substring_search_match_index is equal to
# $#_history_substring_search_matches + 1, this indicates that we
# are beyond the end of $_history_substring_search_matches and that we
# have also processed all entries in
# _history_substring_search_raw_matches.
#
# If $#_history_substring_search_match_index is equal to 0, this indicates
# that we are beyond the beginning of $_history_substring_search_matches.
#
# If we have initially pressed "up" we have to initialize
# $_history_substring_search_match_index to 0 so that it will be
# incremented to 1.
#
# If we have initially pressed "down" we have to initialize
# $_history_substring_search_match_index to 1 so that it will be
# decremented to 0.
#
if [[ $WIDGET == history-substring-search-down ]]; then
_history_substring_search_match_index=1
else
_history_substring_search_match_index=0
fi
}
_history-substring-search-end() {
setopt localoptions extendedglob
local highlight_memo=
_history_substring_search_result=$BUFFER
if [[ $_history_substring_search_zsh_5_9 -eq 1 ]]; then
highlight_memo='memo=history-substring-search'
fi
# the search was successful so display the result properly by clearing away
# existing highlights and moving the cursor to the end of the result buffer
if [[ $_history_substring_search_refresh_display -eq 1 ]]; then
if [[ -n $highlight_memo ]]; then
region_highlight=( "${(@)region_highlight:#*${highlight_memo}*}" )
else
region_highlight=()
fi
CURSOR=${#BUFFER}
fi
# highlight command line using zsh-syntax-highlighting
_zsh_highlight
# highlight the search query inside the command line
if [[ -n $_history_substring_search_query_highlight ]]; then
# highlight first matching query parts
local highlight_start_index=0
local highlight_end_index=0
local query_part
for query_part in $_history_substring_search_query_parts; do
local escaped_query_part=${query_part//(#m)[\][()|\\*?#<>~^]/\\$MATCH}
# (i) get index of pattern
local query_part_match_index="${${BUFFER:$highlight_start_index}[(i)(#$HISTORY_SUBSTRING_SEARCH_GLOBBING_FLAGS)${escaped_query_part}]}"
if [[ $query_part_match_index -le ${#BUFFER:$highlight_start_index} ]]; then
highlight_start_index=$(( $highlight_start_index + $query_part_match_index ))
highlight_end_index=$(( $highlight_start_index + ${#query_part} ))
region_highlight+=(
"$(($highlight_start_index - 1)) $(($highlight_end_index - 1)) ${_history_substring_search_query_highlight}${highlight_memo:+,$highlight_memo}"
)
fi
done
fi
# For debugging purposes:
# zle -R "mn: "$_history_substring_search_match_index" m#: "${#_history_substring_search_matches}
# read -k -t 200 && zle -U $REPLY
#
# When this function returns, z-sy-h runs its line-pre-redraw hook. It has no
# logic for determining highlight priority, when two different memo= marked
# region highlights overlap; instead, it always prioritises itself. Below is
# a workaround for dealing with it.
#
if [[ $_history_substring_search_zsh_5_9 -eq 1 ]]; then
zle -R
#
# After line redraw with desired highlight, wait for timeout or user input
# before removing search highlight and exiting. This ensures no highlights
# are left lingering after search is finished.
#
read -k -t ${HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_TIMEOUT:-1} && zle -U $REPLY
region_highlight=( "${(@)region_highlight:#*${highlight_memo}*}" )
fi
# Exit successfully from the history-substring-search-* widgets.
return 0
}
_history-substring-search-up-buffer() {
#
# Check if the UP arrow was pressed to move the cursor within a multi-line
# buffer. This amounts to three tests:
#
# 1. $#buflines -gt 1.
#
# 2. $CURSOR -ne $#BUFFER.
#
# 3. Check if we are on the first line of the current multi-line buffer.
# If so, pressing UP would amount to leaving the multi-line buffer.
#
# We check this by adding an extra "x" to $LBUFFER, which makes
# sure that xlbuflines is always equal to the number of lines
# until $CURSOR (including the line with the cursor on it).
#
local buflines XLBUFFER xlbuflines
buflines=(${(f)BUFFER})
XLBUFFER=$LBUFFER"x"
xlbuflines=(${(f)XLBUFFER})
if [[ $#buflines -gt 1 && $CURSOR -ne $#BUFFER && $#xlbuflines -ne 1 ]]; then
zle up-line-or-history
return 0
fi
return 1
}
_history-substring-search-down-buffer() {
#
# Check if the DOWN arrow was pressed to move the cursor within a multi-line
# buffer. This amounts to three tests:
#
# 1. $#buflines -gt 1.
#
# 2. $CURSOR -ne $#BUFFER.
#
# 3. Check if we are on the last line of the current multi-line buffer.
# If so, pressing DOWN would amount to leaving the multi-line buffer.
#
# We check this by adding an extra "x" to $RBUFFER, which makes
# sure that xrbuflines is always equal to the number of lines
# from $CURSOR (including the line with the cursor on it).
#
local buflines XRBUFFER xrbuflines
buflines=(${(f)BUFFER})
XRBUFFER="x"$RBUFFER
xrbuflines=(${(f)XRBUFFER})
if [[ $#buflines -gt 1 && $CURSOR -ne $#BUFFER && $#xrbuflines -ne 1 ]]; then
zle down-line-or-history
return 0
fi
return 1
}
_history-substring-search-up-history() {
#
# Behave like up in ZSH, except clear the $BUFFER
# when beginning of history is reached like in Fish.
#
if [[ -z $_history_substring_search_query ]]; then
# we have reached the absolute top of history
if [[ $HISTNO -eq 1 ]]; then
BUFFER=
# going up from somewhere below the top of history
else
zle up-line-or-history
fi
return 0
fi
return 1
}
_history-substring-search-down-history() {
#
# Behave like down-history in ZSH, except clear the
# $BUFFER when end of history is reached like in Fish.
#
if [[ -z $_history_substring_search_query ]]; then
# going down from the absolute top of history
if [[ $HISTNO -eq 1 && -z $BUFFER ]]; then
BUFFER=${history[1]}
_history_substring_search_refresh_display=1
# going down from somewhere above the bottom of history
else
zle down-line-or-history
fi
return 0
fi
return 1
}
_history_substring_search_process_raw_matches() {
#
# Process more outstanding raw matches and append any matches that need to
# be displayed to the user to _history_substring_search_matches.
# Return whether there were any more results appended.
#
#
# While we have more raw matches. Process them to see if there are any more
# matches that need to be displayed to the user.
#
while [[ $_history_substring_search_raw_match_index -lt $#_history_substring_search_raw_matches ]]; do
#
# Move on to the next raw entry and get its history index.
#
_history_substring_search_raw_match_index+=1
local index=${_history_substring_search_raw_matches[$_history_substring_search_raw_match_index]}
#
# If HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE is set to a non-empty value,
# then ensure that only unique matches are presented to the user.
# When HIST_IGNORE_ALL_DUPS is set, ZSH already ensures a unique history,
# so in this case we do not need to do anything.
#
if [[ ! -o HIST_IGNORE_ALL_DUPS && -n $HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE ]]; then
#
# Get the actual history entry at the new index, and check if we have
# already added it to _history_substring_search_matches.
#
local entry=${history[$index]}
if [[ -z ${_history_substring_search_unique_filter[$entry]} ]]; then
#
# This is a new unique entry. Add it to the filter and append the
# index to _history_substring_search_matches.
#
_history_substring_search_unique_filter[$entry]=1
_history_substring_search_matches+=($index)
#
# Indicate that we did find a match.
#
return 0
fi
else
#
# Just append the new history index to the processed matches.
#
_history_substring_search_matches+=($index)
#
# Indicate that we did find a match.
#
return 0
fi
done
#
# We are beyond the end of the list of raw matches. Indicate that no
# more matches are available.
#
return 1
}
_history-substring-search-has-next() {
#
# Predicate function that returns whether any more older matches are
# available.
#
if [[ $_history_substring_search_match_index -lt $#_history_substring_search_matches ]]; then
#
# We did not reach the end of the processed list, so we do have further
# matches.
#
return 0
else
#
# We are at the end of the processed list. Try to process further
# unprocessed matches. _history_substring_search_process_raw_matches
# returns whether any more matches were available, so just return
# that result.
#
_history_substring_search_process_raw_matches
return $?
fi
}
_history-substring-search-has-prev() {
#
# Predicate function that returns whether any more younger matches are
# available.
#
if [[ $_history_substring_search_match_index -gt 1 ]]; then
#
# We did not reach the beginning of the processed list, so we do have
# further matches.
#
return 0
else
#
# We are at the beginning of the processed list. We do not have any more
# matches.
#
return 1
fi
}
_history-substring-search-found() {
#
# A match is available. The index of the match is held in
# $_history_substring_search_match_index
#
# 1. Make $BUFFER equal to the matching history entry.
#
# 2. Use $HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
# to highlight the current buffer.
#
BUFFER=$history[$_history_substring_search_matches[$_history_substring_search_match_index]]
_history_substring_search_query_highlight=$HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_FOUND
}
_history-substring-search-not-found() {
#
# No more matches are available.
#
# 1. Make $BUFFER equal to $_history_substring_search_query so the user can
# revise it and search again.
#
# 2. Use $HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_NOT_FOUND
# to highlight the current buffer.
#
BUFFER=$_history_substring_search_query
_history_substring_search_query_highlight=$HISTORY_SUBSTRING_SEARCH_HIGHLIGHT_NOT_FOUND
}
_history-substring-search-up-search() {
_history_substring_search_refresh_display=1
#
# Select history entry during history-substring-down-search:
#
# The following variables have been initialized in
# _history-substring-search-up/down-search():
#
# $_history_substring_search_matches is the current list of matches that
# need to be displayed to the user.
# $_history_substring_search_match_index is the index of the current match
# that is being displayed to the user.
#
# The range of values that $_history_substring_search_match_index can take
# is: [0, $#_history_substring_search_matches + 1]. A value of 0
# indicates that we are beyond the beginning of
# $_history_substring_search_matches. A value of
# $#_history_substring_search_matches + 1 indicates that we are beyond
# the end of $_history_substring_search_matches and that we have also
# processed all entries in _history_substring_search_raw_matches.
#
# If $_history_substring_search_match_index equals
# $#_history_substring_search_matches and
# $_history_substring_search_raw_match_index is not greater than
# $#_history_substring_search_raw_matches, then we need to further process
# $_history_substring_search_raw_matches to see if there are any more
# entries that need to be displayed to the user.
#
# In _history-substring-search-up-search() the initial value of
# $_history_substring_search_match_index is 0. This value is set in
# _history-substring-search-begin(). _history-substring-search-up-search()
# will initially increment it to 1.
#
if [[ $_history_substring_search_match_index -gt $#_history_substring_search_matches ]]; then
#
# We are beyond the end of $_history_substring_search_matches. This
# can only happen if we have also exhausted the unprocessed matches in
# _history_substring_search_raw_matches.
#
# 1. Update display to indicate search not found.
#
_history-substring-search-not-found
return
fi
if _history-substring-search-has-next; then
#
# We do have older matches.
#
# 1. Move index to point to the next match.
# 2. Update display to indicate search found.
#
_history_substring_search_match_index+=1
_history-substring-search-found
else
#
# We do not have older matches.
#
# 1. Move the index beyond the end of
# _history_substring_search_matches.
# 2. Update display to indicate search not found.
#
_history_substring_search_match_index+=1
_history-substring-search-not-found
fi
#
# When HIST_FIND_NO_DUPS is set, meaning that only unique command lines from
# history should be matched, make sure the new and old results are different.
#
# However, if the HIST_IGNORE_ALL_DUPS shell option, or
# HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE is set, then we already have a
# unique history, so in this case we do not need to do anything.
#
if [[ -o HIST_IGNORE_ALL_DUPS || -n $HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE ]]; then
return
fi
if [[ -o HIST_FIND_NO_DUPS && $BUFFER == $_history_substring_search_result ]]; then
#
# Repeat the current search so that a different (unique) match is found.
#
_history-substring-search-up-search
fi
}
_history-substring-search-down-search() {
_history_substring_search_refresh_display=1
#
# Select history entry during history-substring-down-search:
#
# The following variables have been initialized in
# _history-substring-search-up/down-search():
#
# $_history_substring_search_matches is the current list of matches that
# need to be displayed to the user.
# $_history_substring_search_match_index is the index of the current match
# that is being displayed to the user.
#
# The range of values that $_history_substring_search_match_index can take
# is: [0, $#_history_substring_search_matches + 1]. A value of 0
# indicates that we are beyond the beginning of
# $_history_substring_search_matches. A value of
# $#_history_substring_search_matches + 1 indicates that we are beyond
# the end of $_history_substring_search_matches and that we have also
# processed all entries in _history_substring_search_raw_matches.
#
# In _history-substring-search-down-search() the initial value of
# $_history_substring_search_match_index is 1. This value is set in
# _history-substring-search-begin(). _history-substring-search-down-search()
# will initially decrement it to 0.
#
if [[ $_history_substring_search_match_index -lt 1 ]]; then
#
# We are beyond the beginning of $_history_substring_search_matches.
#
# 1. Update display to indicate search not found.
#
_history-substring-search-not-found
return
fi
if _history-substring-search-has-prev; then
#
# We do have younger matches.
#
# 1. Move index to point to the previous match.
# 2. Update display to indicate search found.
#
_history_substring_search_match_index+=-1
_history-substring-search-found
else
#
# We do not have younger matches.
#
# 1. Move the index beyond the beginning of
# _history_substring_search_matches.
# 2. Update display to indicate search not found.
#
_history_substring_search_match_index+=-1
_history-substring-search-not-found
fi
#
# When HIST_FIND_NO_DUPS is set, meaning that only unique command lines from
# history should be matched, make sure the new and old results are different.
#
# However, if the HIST_IGNORE_ALL_DUPS shell option, or
# HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE is set, then we already have a
# unique history, so in this case we do not need to do anything.
#
if [[ -o HIST_IGNORE_ALL_DUPS || -n $HISTORY_SUBSTRING_SEARCH_ENSURE_UNIQUE ]]; then
return
fi
if [[ -o HIST_FIND_NO_DUPS && $BUFFER == $_history_substring_search_result ]]; then
#
# Repeat the current search so that a different (unique) match is found.
#
_history-substring-search-down-search
fi
}
# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
# vim: ft=zsh sw=2 ts=2 et
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。