1 Star 0 Fork 0

leewg/can-utils

加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
文件
克隆/下载
canbusload.c 11.08 KB
一键复制 编辑 原始数据 按行查看 历史
/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
/*
* canbusload.c - monitor CAN bus load
*
* Copyright (c) 2002-2008 Volkswagen Group Electronic Research
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Volkswagen nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* Alternatively, provided that this notice is retained in full, this
* software may be distributed under the terms of the GNU General
* Public License ("GPL") version 2, in which case the provisions of the
* GPL apply INSTEAD OF those given above.
*
* The provided data structures and external interfaces from this code
* are not restricted to be used by modules with a GPL compatible license.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
* Send feedback to <linux-can@vger.kernel.org>
*
*/
#include <ctype.h>
#include <libgen.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <unistd.h>
#include <net/if.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/uio.h>
#include <linux/can.h>
#include <linux/can/raw.h>
#include "lib.h"
#include "terminal.h"
#include "canframelen.h"
#define MAXSOCK 16 /* max. number of CAN interfaces given on the cmdline */
#define PERCENTRES 5 /* resolution in percent for bargraph */
#define NUMBAR (100 / PERCENTRES) /* number of bargraph elements */
extern int optind, opterr, optopt;
static struct {
char devname[IFNAMSIZ + 1];
unsigned int bitrate;
unsigned int dbitrate;
unsigned int recv_frames;
unsigned int recv_bits_total;
unsigned int recv_bits_payload;
unsigned int recv_bits_dbitrate;
} stat[MAXSOCK + 1];
static volatile int running = 1;
static volatile sig_atomic_t signal_num;
static int max_devname_len; /* to prevent frazzled device name output */
static int max_bitrate_len;
static int currmax;
static unsigned char redraw;
static unsigned char timestamp;
static unsigned char color;
static unsigned char bargraph;
static enum cfl_mode mode = CFL_WORSTCASE;
static char *prg;
void print_usage(char *prg)
{
fprintf(stderr, "%s - monitor CAN bus load.\n", prg);
fprintf(stderr, "\nUsage: %s [options] <CAN interface>+\n", prg);
fprintf(stderr, " (use CTRL-C to terminate %s)\n\n", prg);
fprintf(stderr, "Options:\n");
fprintf(stderr, " -t (show current time on the first line)\n");
fprintf(stderr, " -c (colorize lines)\n");
fprintf(stderr, " -b (show bargraph in %d%% resolution)\n", PERCENTRES);
fprintf(stderr, " -r (redraw the terminal - similar to top)\n");
fprintf(stderr, " -i (ignore bitstuffing in bandwidth calculation)\n");
fprintf(stderr, " -e (exact calculation of stuffed bits)\n");
fprintf(stderr, "\n");
fprintf(stderr, "Up to %d CAN interfaces with mandatory bitrate can be specified on the \n", MAXSOCK);
fprintf(stderr, "commandline in the form: <ifname>@<bitrate>[,<dbitrate>]\n\n");
fprintf(stderr, "The bitrate is mandatory as it is needed to know the CAN bus bitrate to\n");
fprintf(stderr, "calculate the bus load percentage based on the received CAN frames.\n");
fprintf(stderr, "Due to the bitstuffing estimation the calculated busload may exceed 100%%.\n");
fprintf(stderr, "For each given interface the data is presented in one line which contains:\n\n");
fprintf(stderr, "(interface) (received CAN frames) (used bits total) (used bits for payload)\n");
fprintf(stderr, "\nExamples:\n");
fprintf(stderr, "\nuser$> canbusload can0@100000 can1@500000 can2@500000 can3@500000 -r -t -b -c\n\n");
fprintf(stderr, "%s 2014-02-01 21:13:16 (worst case bitstuffing)\n", prg);
fprintf(stderr, " can0@100000 805 74491 36656 74%% |XXXXXXXXXXXXXX......|\n");
fprintf(stderr, " can1@500000 796 75140 37728 15%% |XXX.................|\n");
fprintf(stderr, " can2@500000 0 0 0 0%% |....................|\n");
fprintf(stderr, " can3@500000 47 4633 2424 0%% |....................|\n");
fprintf(stderr, "\n");
}
void sigterm(int signo)
{
running = 0;
signal_num = signo;
}
void printstats(int signo)
{
int i, j, percent;
if (redraw)
printf("%s", CSR_HOME);
if (timestamp) {
time_t currtime;
struct tm now;
if (time(&currtime) == (time_t)-1) {
perror("time");
exit(1);
}
localtime_r(&currtime, &now);
printf("%s %04d-%02d-%02d %02d:%02d:%02d ",
prg,
now.tm_year + 1900,
now.tm_mon + 1,
now.tm_mday,
now.tm_hour,
now.tm_min,
now.tm_sec);
switch (mode) {
case CFL_NO_BITSTUFFING:
/* plain bit calculation without bitstuffing */
printf("(ignore bitstuffing)\n");
break;
case CFL_WORSTCASE:
/* worst case estimation - see above */
printf("(worst case bitstuffing)\n");
break;
case CFL_EXACT:
/* exact calculation of stuffed bits based on frame content and CRC */
printf("(exact bitstuffing)\n");
break;
default:
printf("(unknown bitstuffing)\n");
break;
}
}
for (i = 0; i < currmax; i++) {
if (color) {
if (i % 2)
printf("%s", FGRED);
else
printf("%s", FGBLUE);
}
if (stat[i].bitrate)
percent = ((stat[i].recv_bits_total - stat[i].recv_bits_dbitrate) * 100) / stat[i].bitrate +
(stat[i].recv_bits_dbitrate * 100) / stat[i].dbitrate;
else
percent = 0;
printf(" %*s@%-*d %5d %7d %6d %6d %3d%%",
max_devname_len, stat[i].devname,
max_bitrate_len, stat[i].bitrate,
stat[i].recv_frames,
stat[i].recv_bits_total,
stat[i].recv_bits_payload,
stat[i].recv_bits_dbitrate,
percent);
if (bargraph) {
printf(" |");
if (percent > 100)
percent = 100;
for (j = 0; j < NUMBAR; j++) {
if (j < percent / PERCENTRES)
printf("X");
else
printf(".");
}
printf("|");
}
if (color)
printf("%s", ATTRESET);
if (!redraw || (i < currmax - 1))
printf("\n");
stat[i].recv_frames = 0;
stat[i].recv_bits_total = 0;
stat[i].recv_bits_dbitrate = 0;
stat[i].recv_bits_payload = 0;
}
if (!redraw)
printf("\n");
fflush(stdout);
alarm(1);
}
int main(int argc, char **argv)
{
fd_set rdfs;
int s[MAXSOCK];
int opt;
char *ptr, *nptr;
struct sockaddr_can addr;
struct canfd_frame frame;
int nbytes, i;
struct ifreq ifr;
signal(SIGTERM, sigterm);
signal(SIGHUP, sigterm);
signal(SIGINT, sigterm);
signal(SIGALRM, printstats);
prg = basename(argv[0]);
while ((opt = getopt(argc, argv, "rtbcieh?")) != -1) {
switch (opt) {
case 'r':
redraw = 1;
break;
case 't':
timestamp = 1;
break;
case 'b':
bargraph = 1;
break;
case 'c':
color = 1;
break;
case 'i':
mode = CFL_NO_BITSTUFFING;
break;
case 'e':
mode = CFL_EXACT;
break;
default:
print_usage(prg);
exit(1);
break;
}
}
if (optind == argc) {
print_usage(prg);
exit(0);
}
currmax = argc - optind; /* find real number of CAN devices */
if (currmax > MAXSOCK) {
printf("More than %d CAN devices given on commandline!\n", MAXSOCK);
return 1;
}
for (i = 0; i < currmax; i++) {
ptr = argv[optind + i];
nbytes = strlen(ptr);
if (nbytes >= (int)(IFNAMSIZ + sizeof("@1000000") + 1)) {
printf("name of CAN device '%s' is too long!\n", ptr);
return 1;
}
pr_debug("open %d '%s'.\n", i, ptr);
s[i] = socket(PF_CAN, SOCK_RAW, CAN_RAW);
if (s[i] < 0) {
perror("socket");
return 1;
}
nptr = strchr(ptr, '@');
if (!nptr) {
fprintf(stderr, "Specify CAN interfaces in the form <CAN interface>@<bitrate>, e.g. can0@500000\n");
print_usage(prg);
return 1;
}
nbytes = nptr - ptr; /* interface name is up the first '@' */
if (nbytes >= (int)IFNAMSIZ) {
printf("name of CAN device '%s' is too long!\n", ptr);
return 1;
}
strncpy(stat[i].devname, ptr, nbytes);
memset(&ifr.ifr_name, 0, sizeof(ifr.ifr_name));
strncpy(ifr.ifr_name, ptr, nbytes);
if (nbytes > max_devname_len)
max_devname_len = nbytes; /* for nice printing */
char *endp;
stat[i].bitrate = strtol(nptr + 1, &endp, 0); /* bitrate is placed behind the '@' */
if (*endp == ',')
/* data bitrate is placed behind the ',' */
stat[i].dbitrate = strtol(endp + 1, &endp, 0);
else
stat[i].dbitrate = stat[i].bitrate;
if (!stat[i].bitrate || stat[i].bitrate > 1000000) {
printf("invalid bitrate for CAN device '%s'!\n", ptr);
return 1;
}
nbytes = strlen(nptr + 1);
if (nbytes > max_bitrate_len)
max_bitrate_len = nbytes; /* for nice printing */
pr_debug("using interface name '%s'.\n", ifr.ifr_name);
/* try to switch the socket into CAN FD mode */
const int canfd_on = 1;
setsockopt(s[i], SOL_CAN_RAW, CAN_RAW_FD_FRAMES, &canfd_on, sizeof(canfd_on));
if (ioctl(s[i], SIOCGIFINDEX, &ifr) < 0) {
perror("SIOCGIFINDEX");
exit(1);
}
addr.can_family = AF_CAN;
addr.can_ifindex = ifr.ifr_ifindex;
if (bind(s[i], (struct sockaddr *)&addr, sizeof(addr)) < 0) {
perror("bind");
return 1;
}
}
alarm(1);
if (redraw)
printf("%s", CLR_SCREEN);
while (running) {
FD_ZERO(&rdfs);
for (i = 0; i < currmax; i++)
FD_SET(s[i], &rdfs);
if (select(s[currmax - 1] + 1, &rdfs, NULL, NULL, NULL) < 0) {
//perror("pselect");
continue;
}
for (i = 0; i < currmax; i++) { /* check all CAN RAW sockets */
if (FD_ISSET(s[i], &rdfs)) {
nbytes = read(s[i], &frame, sizeof(frame));
if (nbytes < 0) {
perror("read");
return 1;
}
if (nbytes < (int)sizeof(struct can_frame)) {
fprintf(stderr, "read: incomplete CAN frame\n");
return 1;
}
stat[i].recv_frames++;
stat[i].recv_bits_payload += frame.len * 8;
stat[i].recv_bits_dbitrate += can_frame_dbitrate_length(
&frame, mode, sizeof(frame));
stat[i].recv_bits_total += can_frame_length(&frame,
mode, nbytes);
}
}
}
for (i = 0; i < currmax; i++)
close(s[i]);
if (signal_num)
return 128 + signal_num;
return 0;
}
Loading...
马建仓 AI 助手
尝试更多
代码解读
代码找茬
代码优化
1
https://gitee.com/wg_lee/can-utils.git
git@gitee.com:wg_lee/can-utils.git
wg_lee
can-utils
can-utils
master

搜索帮助