代码拉取完成，页面将自动刷新
/********************************************************************************
*
* Copyright (C) 2017 NEXTCHIP Inc. All rights reserved.
* Module : Raptor3 Device Driver
* Description : coax_protocol.h
* Author :
* Date :
* Version : Version 1.0
*
********************************************************************************
* History :
*
*
********************************************************************************/
#ifndef _RAPTOR3_COAX_PROTOCOL_
#define _RAPTOR3_COAX_PROTOCOL_
#include "common.h"
#define BANK1 0x01
#define BANK2 0x02
#define BANK3 0x03
#define BANKC 0x0C
#define FW_SUCCESS 0
#define FW_FAILURE -1
#define DBG_TX_INIT_PRINT 0
#define DBG_TX_CMD_PRINT 0
#define DBG_RX_INIT_PRINT 0
#define AHD2_PEL_OUT 0x0C
#define AHD2_FHD_OUT 0x09
#define AHD2_FHD_D0 0x10
/* for baud rate */
#define ACP_PACKET_MODE 0x0B
#define ACP_AHD2_FHD_D0 0x10
#define ACP_AHD2_PEL_BAUD 0x02
#define ACP_AHD2_PEL_LINE 0x07
#define ACP_AHD2_PEL_SYNC 0x0D
#define ACP_AHD2_PEL_EVEN 0x2F
#define ACP_AHD2_FHD_BAUD 0x00
#define ACP_AHD2_FHD_LINE 0x03
#define ACP_AHD2_FHD_LINES 0x05
#define ACP_AHD2_FHD_BYTE 0x0A
#define ACP_AHD2_FHD_MODE 0x0B
#define ACP_AHD2_FHD_OUT 0x09
#define ACP_CLR_REG 0x3A
typedef enum NC_COAX_CMD_DEF
{
COAX_CMD_UNKNOWN = 0,
COAX_CMD_IRIS_INC,
COAX_CMD_IRIS_DEC,
COAX_CMD_FOCUS_INC,
COAX_CMD_FOCUS_DEC,
COAX_CMD_ZOOM_INC, // 5
COAX_CMD_ZOOM_DEC,
COAX_CMD_OSD_ON,
COAX_CMD_PTZ_UP,
COAX_CMD_PTZ_DOWN,
COAX_CMD_PTZ_LEFT, // 10
COAX_CMD_PTZ_RIGHT,
COAX_CMD_OSD_ENTER,
COAX_CMD_SPECIAL_FW,
COAX_CMD_SPECIAL_CAMEQ,
COAX_CMD_SPECIAL_FPS, // 15
COAX_CMD_SPECIAL_MOTION,
COAX_CMD_SPECIAL_3DNR_REQUEST,
COAX_CMD_TVI_DOWNSTREAM_REQUEST,
COAX_CMD_TVI_1M_A_B_TYPE_CHANGE_A,
COAX_CMD_TVI_1M_A_B_TYPE_CHANGE_B,
COAX_CMD_OSD_UP,
COAX_CMD_OSD_DOWN,
COAX_CMD_OSD_LEFT, // 20
COAX_CMD_OSD_RIGHT,
COAX_CMD_STOP,
/******** *******/
COAX_CMD_LEFT_UP,
COAX_CMD_LEFT_DOWN,
COAX_CMD_RIGHT_UP, // 25
COAX_CMD_RIGHT_DOWN,
COAX_CMD_SET_POINT,
COAX_CMD_CLEAR_POINT,
COAX_CMD_GOTO_POINT,
COAX_CMD_AUTO, // 30
COAX_CMD_AUTO_STOP,
COAX_CMD_SCAN_SR,
COAX_CMD_SCAN_ST,
COAX_CMD_PRESET1,
COAX_CMD_PRESET2,
COAX_CMD_PRESET3,
COAX_CMD_PTN1_SR,
COAX_CMD_PTN1_ST,
COAX_CMD_PTN2_SR,
COAX_CMD_PTN2_ST,
COAX_CMD_PTN3_SR,
COAX_CMD_PTN3_ST,
COAX_CMD_RUN,
COAX_CMD_SET_CAMERA,
COAX_CMD_SET_WHITE_LED,
COAX_CMD_SET_WHITE_LED_MODE,
COAX_CMD_MAX,
} NC_COAX_CMD_DEF;
/*=============================================================
* Coaxial Test Structure[APP <-> DRV]
==============================================================*/
typedef struct NC_VD_COAX_TEST_STR{
unsigned char ch;
unsigned char chip_num;
unsigned char bank;
unsigned char data_addr;
unsigned char param;
unsigned char rx_src; //B5/6/7/8 0x7C
unsigned char rx_slice_lev; //B5/6/7/8 0x7D
unsigned char tx_baud; //B3/4 0x00/80
unsigned char tx_pel_baud; //B3/4 0x02/82
unsigned char tx_line_pos0; //B3/4 0x03/83
unsigned char tx_line_pos1; //B3/4 0x04/84
unsigned char tx_pel_line_pos0; //B3/4 0x07/87
unsigned char tx_pel_line_pos1; //B3/4 0x08/88
unsigned char tx_line_count; //B3/4 0x05/85
unsigned char tx_line_count_max; //B3/4 0x0A/8A
unsigned char tx_mode; //B3/4 0x0B/8B
unsigned char tx_sync_pos0; //B3/4 0x0D/8D
unsigned char tx_sync_pos1; //B3/4 0x0E/8E
unsigned char tx_even; //B3/4 0x2F/AF
unsigned char tx_zero_length; //B3/4 0x0C/
}NC_VD_COAX_TEST_STR;
typedef struct NC_VD_COAX_BANK_DUMP_STR{
unsigned char ch;
unsigned char vd_dev;
unsigned char bank;
unsigned char rx_pelco_data[256];
}NC_VD_COAX_BANK_DUMP_STR;
/*=============================================================
* Coaxial UP/Down Stream Initialize Structure[APP -> DRV]
==============================================================*/
typedef struct NC_VD_COAX_STR{
char *name;
unsigned char ch;
unsigned char vd_dev;
unsigned char param;
NC_FORMAT_STANDARD format_standard;
NC_FORMAT_RESOLUTION format_resolution;
NC_FORMAT_FPS format_fps;
NC_VIVO_CH_FORMATDEF vivo_fmt;
NC_COAX_CMD_DEF cmd;
unsigned char rx_pelco_data[8];
unsigned char rx_data1[8];
unsigned char rx_data2[8];
unsigned char rx_data3[8];
unsigned char rx_data4[8];
unsigned char rx_data5[8];
unsigned char rx_data6[8];
}NC_VD_COAX_STR;
typedef struct _nvp6124_input_videofmt
{
unsigned int inputvideofmt[16];
unsigned int getvideofmt[16];
unsigned int geteqstage[16];
unsigned int getacpdata[16][8];
}nvp6124_input_videofmt;
/*=============================================================
* COAX FW Upgrade
==============================================================*/
/*typedef struct __file_information
{
unsigned int channel; // FirmUP Channel
unsigned int cp_mode; // Channel Format
unsigned char filename[64]; //
unsigned char filePullname[64+32]; // FirmUP FileNmae
unsigned int filesize;
unsigned int filechecksum; // (sum of file&0x0000FFFFF)
unsigned int currentpacketnum; // current packet sequnce number(0,1,2........)
unsigned int filepacketnum; // file packet number = (total size/128bytes), if remain exist, file packet number++
unsigned char onepacketbuf[128+32];
unsigned int currentFileOffset; // Current file offset
unsigned int readsize; // currnet read size
unsigned int receive_addr;
unsigned int ispossiblefirmup[16]; // is it possible to update firmware?
int result;
int appstatus[16]; // Application status
} FIRMWARE_UP_FILE_INFO, *PFIRMWARE_UP_FILE_INFO;
*/
// Coaxial UP Stream Function
void coax_tx_init( void *p_param ); // Coax Tx : Initialize
void coax_tx_cmd_send( void *p_param,unsigned char udata ,unsigned char data); // Coax Tx : Command Send
void coax_tx_16bit_init( void *p_param );
void coax_tx_16bit_cmd_send( void *p_param ,unsigned char udata,unsigned char data);
void coax_tx_cvi_new_cmd_send( void *p_param ,unsigned char udata,unsigned char data);
// Coaxial Down Stream Function
void coax_rx_init( void *p_param ); // Coax Rx : Initialize
void coax_rx_data_get( void *p_param ); // Coax Rx : All Rx Buffer read
void coax_rx_buffer_clear( void *p_param ); // Coax Rx : Rx Buffer Clear
void rs_coax_rx_buffer_clear(unsigned char ch);
void coax_rx_deinit( void *p_param ); // Coax Rx : 3x63 Set[ 1 -> 0 ]
// Coaxial FW Update Function
void coax_fw_ready_header_check_from_isp_recv(void *p_param);
void coax_fw_ready_cmd_to_isp_send(void *p_param); // 1.1 FW Update Ready Command Send
void coax_fw_ready_cmd_ack_from_isp_recv(void *p_param); // 1.2 FW Update Ready ACK
void coax_fw_start_cmd_to_isp_send( void *p_param ); // 2.1 FW Update Start Command Send
//void coax_fw_start_cmd_ack_from_isp_recv( void *p_param); // 2.2 FW Update Start ACK
int coax_fw_start_cmd_ack_from_isp_recv( int ch,int devnum);
void coax_fw_one_packet_data_to_isp_send( void *p_param ); // 3.1 FW Update One Packet Data Send
int coax_fw_one_packet_data_ack_from_isp_recv( void *p_param ); // 3.2 FW Update One Packet Data ACK
void coax_fw_end_cmd_to_isp_send( void *p_param ); // 4.1 FW Update End Command Send
void coax_fw_end_cmd_ack_from_isp_recv( void *p_param ); // 4.2 FW Update End ACK
// Coaxial Option
void coax_option_rt_nrt_mode_change_set(void *p_param); // RT, NRT Mode change
// Coaxial Test Function
void coax_test_tx_init_read(NC_VD_COAX_TEST_STR *coax_tx_mode); // Coax Test : Tx Init Read
void coax_test_data_set(NC_VD_COAX_TEST_STR *coax_data); // Coax Test : 1byte Data write
void coax_test_data_get(NC_VD_COAX_TEST_STR *coax_data); // Coax Test : 1byte Data read
void coax_test_Bank_dump_get(NC_VD_COAX_BANK_DUMP_STR *coax_data); // Bank Dump
unsigned char acp_isp_read(unsigned char ch, unsigned int reg_addr);
int acp_dvr_firmware_update( void *p_param );
void acp_dvr_start_command( void *p_param );
int acp_dvr_end_command( int send_success, void *p_param );
void RS_APP_VD_COAX_Tx_Init( int vd_dev, int vd_ch, NC_FORMAT_STANDARD format_standard, NC_FORMAT_RESOLUTION format_resolution, NC_FORMAT_FPS format_fps );
void RS_APP_VD_COAX_Rx_Init( int vd_dev, int vd_ch, NC_FORMAT_STANDARD format_standard, NC_FORMAT_RESOLUTION format_resolution, NC_FORMAT_FPS format_fps );
void RS_APP_VD_COAX_Tx_Command_Send_Set( int vd_dev, int vd_ch, NC_FORMAT_STANDARD format_standard, NC_FORMAT_RESOLUTION format_resolution, NC_FORMAT_FPS format_fps, NC_COAX_CMD_DEF cmd,unsigned char udata ,unsigned char data);
void RS_APP_VD_COAX_Tx_16Bit_Command_Send_Set( int vd_dev, int vd_ch, NC_FORMAT_STANDARD format_standard, NC_FORMAT_RESOLUTION format_resolution, NC_FORMAT_FPS format_fps, NC_COAX_CMD_DEF cmd ,unsigned char udata,unsigned char data);
void __nvp6158_set_each_coax_mode(unsigned char ch);
void acp_isp_init(unsigned char ch, unsigned int reg_addr);
void acp_isp_write(unsigned char ch, unsigned int reg_addr, unsigned char reg_data);
void acp_read(nvp6124_input_videofmt *pvideoacp, unsigned char ch);
void acp_isp_init_rs(unsigned char ch, unsigned int reg_addr);
unsigned char acp_isp_read_rs(unsigned char ch, unsigned int reg_addr);
unsigned char acp_isp_read_rs_ex(unsigned char ch, unsigned char data[4]);
void RS_TVI_ACP_Rx_Data_Get(unsigned char ch,unsigned char *data);
void nvp6158_acp_command(unsigned char ch);
void nvp6158_send_comm(unsigned char pel_ch, NC_COAX_CMD_DEF cmd,bool stop);
void nvp6158_presend_comm(unsigned char pel_ch);
void rs_coax_rx_buffer_clear(unsigned char ch);
#endif
/********************************************************************
* End of file
********************************************************************/
此处可能存在不合适展示的内容，页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容，可点击提交进行申诉，我们将尽快为您处理。
马建仓 AI 助手