/*
 * Versal PMC SYS
 *
 * Copyright (c) 2016, Xilinx Inc
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of the <organization> nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "versal.dtsh"

&amba_pmc_sys {
	doc-name = "PMC System";
	doc-status = "partial";
	pmc_clk_rst: pmc_clk_rst@MM_PMC_CRP {
		doc-status = "partial";
		compatible = "xlnx,pmc-clk-rst";
		reg = <0x0 MM_PMC_CRP 0x0 0x80000 0x0>;
		interrupts = <CRP_IRQ_0>;
		gpio-controller;
		#gpio-cells = <1>;
	};

	pmc_int: pmc_int@MM_PMC_INTPMC_CONFIG {
		doc-status = "partial";
		compatible = "xlnx,versal-pmc-int";
		reg = <0x0 MM_PMC_INTPMC_CONFIG
                       0x0 MM_PMC_INTPMC_CONFIG_SIZE 0x0>;
		interrupts = <PMC_INT_IRQ_0>;
	};

	pmc_reset_domain@0 {
		compatible = "qemu.reset-device";
		gpios = < &pmc_clk_rst CRP_RST_PS_PMC_SRST >;
	};

	pmc_global: pmc_global@MM_PMC_PMC_GLOBAL {
		doc-status = "partial";
		#gpio-cells = <1>;
		gpio-controller;
		/* Use interrupts extended to avoid interrupt-maps routing these
		 * to the GIC and GIC-Proxies.  */
		interrupts-extended = <&pmc_ppu1_io_intc IRQ_PPU1_INTC_WAKEUP
				       &pmc_ppu1_io_intc IRQ_PPU1_INTC_REQ_ISOLATION
				       &pmc_ppu1_io_intc IRQ_PPU1_INTC_REQ_SWRST
				       &pmc_ppu1_io_intc IRQ_PPU1_INTC_REQ_PWRUP
				       &pmc_ppu1_io_intc IRQ_PPU1_INTC_REQ_PWRDWN
				       &pmc_ppu1_io_intc IRQ_PPU1_INTC_PL
				       &pmc_ppu1_io_intc IRQ_PPU1_INTC_PPU1_GPI
				       &dummy1 0 /* PMC GLOBAL_IMR.  */
				       &pmc_ppu0_io_intc IRQ_PPU0_INTC_TAMPER_REG>;
		reg = <0x0 MM_PMC_PMC_GLOBAL 0x0 MM_PMC_PMC_GLOBAL_SYS_SIZE 0x0>;
		gpios = <&pmc_puf_ctrl PMC_PUF_CTRL_PUF_ERROR>;

		compatible = "xlnx,pmc_global";
	};
	pmc_stream_zero: pmc_stream_zero@ {
		compatible = "xlnx,pmc-stream-zero";
		reg = <0x0 MM_PRAM_ZEROIZE 0x0 MM_PRAM_ZEROIZE_SIZE 0x1>;
		stream-connected-pzm = <&pmc_stream_switch>;
	};
	pmc_analog@MM_PMC_PMC_ANALOG {
		compatible = "xlnx,pmc-analog";
		reg = <0x0 MM_PMC_PMC_ANALOG 0x0 MM_PMC_PMC_ANALOG_SIZE 0x0>;
	};
	pmc_sysmon@MM_PMC_PMC_SYSMON {
		compatible = "xlnx,pmc-sysmon";
		reg = <0x0 MM_PMC_PMC_SYSMON 0x0 MM_PMC_PMC_SYSMON_SIZE 0x0>;
		interrupts = <SYSMON_IRQ_0
			      SYSMON_IRQ_1>;
		reset-gpios = <&pmc_clk_rst CRP_RST_SYSMON_CFG>;
	};
	pmc_global_tamper: versal_pmc_tamper@ {
		compatible = "xlnx,pmc_tamper";
		reg-extended = <&amba_pmc_sys 0x0 0xF1110530 0x0 0x38 0x1
				&lmb_pmc_ppu0 0x0 0xF0041100 0x0 0x38 0x2>;
	};
};