代码拉取完成，页面将自动刷新
#!/bin/ash
#WORK IN PROGRESS
# Define toolkit paths
GITUSER="iamromulan"
GITREPO="quectel-rgmii-toolkit"
GITTREE="SDXPINN"
GITMAINTREE="SDXPINN"
GITDEVTREE="development-SDXPINN"
TMP_DIR="/tmp"
USRDATA_DIR="/data"
SIMPLE_FIREWALL_DIR="/data/simplefirewall"
SIMPLE_FIREWALL_SCRIPT="$SIMPLE_FIREWALL_DIR/simplefirewall.sh"
SIMPLE_FIREWALL_SYSTEMD_DIR="$SIMPLE_FIREWALL_DIR/systemd"
# Function to remount file system as read-write
remount_rw() {
mount -o remount,rw /
}
# Function to remount file system as read-only
remount_ro() {
mount -o remount,ro /
}
send_at_commands_using_atcmd() {
while true; do
echo -e "\e[1;32mEnter AT command (or type 'exit' to return to the main menu): \e[0m"
read at_command
if [ "$at_command" = "exit" ]; then
echo -e "\e[1;32mReturning to the main menu.\e[0m"
break
fi
echo -e "\e[1;32mSending AT command: $at_command\e[0m"
echo -e "\e[1;32mResponse:\e[0m"
# Use atcmd to send the command and display the output
atcmd_output=$(atcmd "'$at_command'")
echo "$atcmd_output"
echo -e "\e[1;32m----------------------------------------\e[0m"
done
}
overlay_check() {
if ! grep -qs '/real_rootfs ' /proc/mounts; then
echo -e "\e[31mYou have not installed the sdxpinn-mount-fix!!! Please run option 2!!\e[0m"
return 1
fi
}
install_mount_fix() {
# Check if neither /etc nor /real_rootfs is mounted
if ! grep -qs '/etc ' /proc/mounts && ! grep -qs '/real_rootfs ' /proc/mounts; then
# Echo message in red
echo -e "\033[31mSomething is wrong or this is not an SDXPINN modem.\033[0m"
echo -e "\033[31mI was expecting either /etc or /real_rootfs to be a mount point.\033[0m"
exit 1
fi
# Check if /etc is mounted
if grep -qs '/etc ' /proc/mounts; then
echo "Unmounting /etc..."
umount -lf /etc
fi
# Check if /real_rootfs is mounted
if grep -qs '/real_rootfs ' /proc/mounts; then
# Echo message in red
echo -e "\033[31mThe environment has already been setup. If you want to undo the changes temporarily run service mount-fix stop.\033[0m"
echo -e "\033[31mWant to uninstal? Then run opkg remove sdxpinn-mount-fix\033[0m"
exit 1
fi
# Install mount-fix
cd /tmp
curl -O https://raw.githubusercontent.com/$GITUSER/$GITREPO/$GITTREE/opkg-feed/sdxpinn-mount-fix_1.1.0_aarch64_cortex-a53.ipk
opkg install sdxpinn-mount-fix_1.1.0_aarch64_cortex-a53.ipk
}
basic_55x_setup() {
echo "src/gz iamromulan-SDXPINN-repo https://raw.githubusercontent.com/iamromulan/quectel-rgmii-toolkit/SDXPINN/opkg-feed" >> /etc/opkg/customfeeds.conf
cd /tmp
curl -O https://raw.githubusercontent.com/$GITUSER/$GITREPO/$GITTREE/opkg-feed/iamromulan-SDXPINN-repo.key
opkg-key add /tmp/iamromulan-SDXPINN-repo.key
opkg update
echo -e "\e[92m"
echo "iamromulan's ipk/opkg repo added!...."
echo -e "\e[0m"
opkg install atinout luci-app-atinout-mod sdxpinn-console-menu
# Get rid of the Quectel Login Binary
opkg install shadow-login
mv /bin/login /bin/login.old
cp /usr/bin/login /bin/login
opkg install luci-app-ttyd
opkg install mc-skins
service uhttpd enable
service dropbear enable
service uhttpd start
service dropbear start
echo "Basic packages installed!"
echo "Visit https://github.com/iamromulan for more!"
echo -e "\e[0m"
}
ttl_setup() {
local ttl_file="/etc/firewall.user.ttl"
local lan_utils_script="/etc/data/lanUtils.sh"
local combine_function="util_combine_iptable_rules"
local temp_file="/tmp/temp_firewall_user_ttl"
overlay_check || return
while true; do
if [ ! -f "$ttl_file" ]; then
echo "Creating $ttl_file..."
touch "$ttl_file"
echo "Modifying $combine_function in $lan_utils_script..."
# Backup the original script
cp "$lan_utils_script" "${lan_utils_script}.bak"
# Add the local ttl_firewall_file line if it's not already present
if ! grep -q "local ttl_firewall_file" "$lan_utils_script"; then
sed -i '/local tcpmss_firewall_filev6/a \ local ttl_firewall_file=/etc/firewall.user.ttl' "$lan_utils_script"
fi
# Add the condition to include the ttl_firewall_file if it's not already present
if (! grep -q "if \[ -f \"\$ttl_firewall_file\" \]; then" "$lan_utils_script"); then
sed -i '/if \[ -f "\$tcpmss_firewall_filev6" \]; then/i \ if [ -f "\$ttl_firewall_file" ]; then\n cat \$ttl_firewall_file >> \$firewall_file\n fi' "$lan_utils_script"
fi
fi
if [ ! -s "$ttl_file" ]; then
echo -e "\e[31mTTL is not enabled\e[0m"
else
ipv4_ttl=$(grep 'iptables -t mangle -A POSTROUTING' "$ttl_file" | awk '{for(i=1;i<=NF;i++){if($i=="--ttl-set"){print $(i+1)}}}')
ipv6_ttl=$(grep 'ip6tables -t mangle -A POSTROUTING' "$ttl_file" | awk '{for(i=1;i<=NF;i++){if($i=="--hl-set"){print $(i+1)}}}')
echo -e "\e[32mCurrent IPv4 TTL: $ipv4_ttl\e[0m"
echo -e "\e[32mCurrent IPv6 TTL: $ipv6_ttl\e[0m"
fi
echo -e "\e[32mWould you like to edit the TTL settings?\e[0m"
echo -e "\e[32mTTL Value will be set without needing a reboot \e[0m"
echo -e "\e[33mType yes or exit:\e[0m" && read -r response
if [ "$response" = "exit" ]; then
echo "Exiting..."
break
elif [ "$response" = "yes" ]; then
echo -e "\e[32mType 0 to disable TTL\e[0m"
echo -e "\e[33mEnter the TTL value (number only):\e[0m" && read -r ttl_value
if ! [[ "$ttl_value" =~ ^[0-9]+$ ]]; then
echo "Invalid input, please enter a number."
else
# Clear existing TTL rules
echo "Clearing existing TTL rules..."
iptables -t mangle -D POSTROUTING -o rmnet+ -j TTL --ttl-set "$ipv4_ttl"
ip6tables -t mangle -D POSTROUTING -o rmnet+ -j HL --hl-set "$ipv6_ttl"
if [ "$ttl_value" -eq 0 ]; then
echo "Disabling TTL..."
> "$ttl_file"
else
echo "Setting TTL to $ttl_value..."
echo "iptables -t mangle -A POSTROUTING -o rmnet+ -j TTL --ttl-set $ttl_value" > "$ttl_file"
echo "ip6tables -t mangle -A POSTROUTING -o rmnet+ -j HL --hl-set $ttl_value" >> "$ttl_file"
iptables -t mangle -A POSTROUTING -o rmnet+ -j TTL --ttl-set $ttl_value
ip6tables -t mangle -A POSTROUTING -o rmnet+ -j HL --hl-set $ttl_value
fi
fi
fi
done
}
set_root_passwd() {
passwd
}
# Function for Tailscale Submenu
tailscale_menu() {
while true; do
echo -e "\e[1;32mTailscale Menu\e[0m"
echo -e "\e[1;32m1) Install/Update Tailscale\e[0m"
echo -e "\e[1;36m2) Configure Tailscale\e[0m"
echo -e "\e[1;31m3) Return to Main Menu\e[0m"
read -p "Enter your choice: " tailscale_choice
case $tailscale_choice in
1) install_update_tailscale ;;
2) configure_tailscale ;;
3) break ;;
*) echo "Invalid option" ;;
esac
done
}
# Function to install, update, or remove Tailscale
install_update_tailscale() {
echo -e "\e[1;31mInstalling Tailscale 1.74.1...\e[0m"
cd /tmp
curl -O https://raw.githubusercontent.com/$GITUSER/$GITREPO/$GITTREE/opkg-feed/tailscaled_1.74.1-1_aarch64_cortex-a53.ipk
curl -O https://raw.githubusercontent.com/$GITUSER/$GITREPO/$GITTREE/opkg-feed/tailscale_1.74.1-1_aarch64_cortex-a53.ipk
opkg install tailscaled_1.74.1-1_aarch64_cortex-a53.ipk
opkg install tailscale_1.74.1-1_aarch64_cortex-a53.ipk
echo -e "\e[1;32mTailscale version 1.74.1 installed\e[0m"
}
# Function to Configure Tailscale
configure_tailscale() {
while true; do
echo "Configure Tailscale"
echo -e "\e[38;5;40m1) Enable Tailscale Web UI at http://192.168.225.1:8088 (Gateway on port 8088)\e[0m" # Green
echo -e "\e[38;5;196m2) Disable Tailscale Web UI\e[0m" # Red
echo -e "\e[38;5;27m3) Connect to Tailnet\e[0m" # Brown
echo -e "\e[38;5;87m4) Connect to Tailnet with SSH ON\e[0m" # Light cyan
echo -e "\e[38;5;105m5) Reconnect to Tailnet with SSH OFF\e[0m" # Light magenta
echo -e "\e[38;5;172m6) Disconnect from Tailnet (reconnects at reboot)\e[0m" # Light yellow
echo -e "\e[1;31m7) Logout from tailscale account\e[0m"
echo -e "\e[38;5;27m8) Return to Tailscale Menu\e[0m"
read -p "Enter your choice: " config_choice
case $config_choice in
1) echo -e "\e[38;5;196mNot for the 551 yet\e[0m" ;; # Red
2) echo -e "\e[38;5;196mNot for the 551 yet\e[0m" ;; # Red
3) tailscale up --accept-dns=false --reset ;;
4) tailscale up --ssh --accept-dns=false --reset ;;
5) tailscale up --accept-dns=false --reset ;;
6) tailscale down ;;
7) tailscale logout ;;
8) break ;;
*) echo "Invalid option" ;;
esac
done
}
# Main menu
while true; do
echo " .%+: "
echo " .*@@@-. "
echo " :@@@@- "
echo " @@@@#. "
echo " -@@@@#. "
echo " :. %@@@@: -# "
echo " .+- #@@@@%.+@- "
echo " .#- . +@@@@# #@- "
echo " -@*@*@% @@@@@::@@= "
echo ".+%@@@@@@@@@%=. =@@@@# #@@- .. "
echo " .@@@@@: :@@@@@ =@@@..%= "
echo " -::@-.+. @@@@@.=@@@- =@- "
echo " .@- .@@@@@:.@@@* @@. "
echo " .%- -@@@@@:=@@@@ @@# "
echo " .#- .%@@@@@@#. +@@@@@.#@@@@ @@@."
echo " .*- .@@@@@@@@@@=. @@@@@@ @@@@@ @@@:"
echo " :. .%@@@@@@@@@@@%. .@@@@@+:@@@@@ @@@-"
echo " -@@@@@@@@@@@@@@@..@@@@@@.-@@@@@ .@@@-"
echo " -@@@@@@@@@@%. .@@@@@@. @@@@@+ =@@@="
echo " =@@@@@@@@* .@@@@@@. @@@@@@..@@@@-"
echo " #@@@@@@@@-*@@@@@%..@@@@@@+ #@@@@-"
echo " @@@@@@:.-@@@@@@. @@@@@@= %@@@@@."
echo " .@@@@. *@@@@@@- .+@@@@@@-.@@@@@@+ "
echo " %@@. =@@@@@*. +@@@@@@%.-@@@@@@% "
echo " .@@ .@@@@@= :@@@@@@@@..@@@@@@@= "
echo " =@.+@@@@@. -@@@@@@@*.:@@@@@@@*. "
echo " %.*@@@@= .@@@@@@@-.:@@@@@@@+. "
echo " ..@@@@= .@@@@@@: #@@@@@@@: "
echo " .@@@@ +@@@@..%@@@@@+. "
echo " .@@@. @@@@.:@@@@+. "
echo " @@@. @@@. @@@* .@. "
echo " :@@@ %@@..@@#. *@ "
echo " -*: .@@* :@@. @@. -..@@ "
echo " =@@@@@@.*@- :@% @* =@:=@# "
echo " .@@@-+@@@@:%@..%- ...@%:@@: "
echo " .@@. @@-%@: .%@@*@@%. "
echo " :@@ :+ *@ *@@#*@@@. "
echo " =@@@.@@@@ "
echo " .*@@@:=@@@@: "
echo " .@@@@:.@@@@@: "
echo " .@@@@#.-@@@@@. "
echo " #@@@@: =@@@@@- "
echo " .@@@@@..@@@@@@* "
echo " -@@@@@. @@@@@@#. "
echo " -@@@@@ @@@@@@% "
echo " @@@@@. #@@@@@@. "
echo " :@@@@# =@@@@@@% "
echo " @@@@@: @@@@@@@: "
echo " *@@@@ @@@@@@@. "
echo " .@@@@ @@@@@@@ "
echo " #@@@. @@@@@@* "
echo " @@@# @@@@@@@ "
echo " .@@+=@@@@@@. "
echo " *@@@@@@ "
echo " :@@@@@= "
echo " .@@@@@@. "
echo " :@@@@@*. "
echo " .=@@@@@- "
echo " :+##+. "
echo -e "\e[92m"
echo "Welcome to iamromulan's rcPCIe Toolkit script for Quectel RM55x Series modems!"
echo "Visit https://github.com/iamromulan for more!"
echo -e "\e[0m"
echo -e "\e[91mThis is a test version of the toolkit for the new RM550/551 modems\e[0m" # Light Red
echo "Select an option:"
echo -e "\e[0m"
echo -e "\e[96m1) Send AT Commands\e[0m" # Cyan
echo -e "\e[92m2) Install sdxpinn-mount-fix/run me after a flash!\e[0m" # Green
echo -e "\e[94m3) TTL Setup\e[0m" # Light Blue
echo -e "\e[94m4) Install Basic Packages/enable luci/add iamromulan's feed to opkg(\e[0m" # Light Blue
echo -e "\e[94m5) Set root password\e[0m" # Light Blue
echo -e "\e[94m6) Tailscale Management\e[0m" # Light Blue
echo -e "\e[92m7) Install Speedtest.net CLI app (speedtest command)\e[0m" # Light Green
echo -e "\e[93m8) Exit\e[0m" # Yellow (repeated color for exit option)
read -p "Enter your choice: " choice
case $choice in
1) send_at_commands_using_atcmd ;;
2) remount_rw; install_mount_fix ;;
3)
overlay_check
if [ $? -eq 1 ]; then continue; fi
ttl_setup
;;
4)
overlay_check
if [ $? -eq 1 ]; then continue; fi
basic_55x_setup
;;
5)
overlay_check
if [ $? -eq 1 ]; then continue; fi
set_root_passwd
;;
6) tailscale_menu ;;
7)
overlay_check
if [ $? -eq 1 ]; then continue; fi
echo -e "\e[1;32mInstalling Speedtest.net CLI (speedtest command)\e[0m"
cd /tmp
curl -O https://raw.githubusercontent.com/$GITUSER/$GITREPO/$GITTREE/opkg-feed/ookla-speedtest_1.2.0_aarch64_cortex-a53.ipk
opkg install ookla-speedtest_1.2.0_aarch64_cortex-a53.ipk
echo -e "\e[1;32mSpeedtest CLI (speedtest command) installed!!\e[0m"
echo -e "\e[1;32mTry running the command 'speedtest'\e[0m"
echo -e "\e[1;32mNote that it will not work unless you login to the root account first\e[0m"
echo -e "\e[1;32mNormally only an issue in adb, ttyd, and ssh you are forced to login\e[0m"
echo -e "\e[1;32mIf in adb just type login and then try to run the speedtest command\e[0m"
;;
8) echo -e "\e[1;32mGoodbye!\e[0m"; break ;;
*) echo -e "\e[1;31mInvalid option\e[0m" ;;
esac
done
此处可能存在不合适展示的内容，页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容，可点击提交进行申诉，我们将尽快为您处理。
马建仓 AI 助手