syncthing 标签 - Gitee.com

v1.12.0-rc.2

35c813f

2020-11-12 01:18

下载

v1.12.0-rc.1

846b265

2020-11-10 00:02

下载

v1.11.1

2b9cef3

2020-11-03 19:29

下载

v1.11.0

This release adds the `sendFullIndexOnUpgrade` option to control whether
all index data is resent when an upgrade is detected, equivalent to
starting Syncthing with `--reset-deltas`. This
(`sendFullIndexOnUpgrade=true`) used to be the behavior in previous
versions, but is mainly useful as a troubleshooting step and causes high
database churn. The new default is `false`.

Bugfixes:

- #6994: "panic: filling Blocks: leveldb: snapshot released" on folder save
- #7002: "Syncing (NaN%, 0 B)" when syncing 0-byte files
- #7008: Filenames containing dots lead to a "The system cannot find the file specified" sync error
- #7021: Tests fail when building the Alpine pkg on aarch64
- #7034: Folders getting stuck in "Syncing" after a20c6ca after doing changes when folders are paused
- #7035: Devices Announcing LAN addresses even with AnnounceLANAddresses set to off/false
- #7036: Shutting Syncthing down while pushing files to multiple devices corrupts the database?

Enhancements:

- #6982: Disable full index transmission on upgrade
- #7020: Do not disconnect when changing folder settings
- #7028: Detect and optionally report non-fatal failures

1c2be84

2020-10-22 19:05

下载

v1.11.0-rc.3

This release adds the `sendFullIndexOnUpgrade` option to control whether
all index data is resent when an upgrade is detected, equivalent to
starting Syncthing with `--reset-deltas`. This
(`sendFullIndexOnUpgrade=true`) used to be the behavior in previous
versions, but is mainly useful as a troubleshooting step and causes high
database churn. The new default is `false`.

Bugfixes:

- #6994: "panic: filling Blocks: leveldb: snapshot released" on folder save
- #7002: "Syncing (NaN%, 0 B)" when syncing 0-byte files
- #7008: Filenames containing dots lead to a "The system cannot find the file specified" sync error
- #7021: Tests fail when building the Alpine pkg on aarch64
- #7034: Folders getting stuck in "Syncing" after a20c6ca after doing changes when folders are paused
- #7035: Devices Announcing LAN addresses even with AnnounceLANAddresses set to off/false
- #7036: Shutting Syncthing down while pushing files to multiple devices corrupts the database?

Enhancements:

- #6982: Disable full index transmission on upgrade
- #7020: Do not disconnect when changing folder settings
- #7028: Detect and optionally report non-fatal failures

1c2be84

2020-10-22 19:05

下载

v1.11.0-rc.2

This release adds the `sendFullIndexOnUpgrade` option to control whether
all index data is resent when an upgrade is detected, equivalent to
starting Syncthing with `--reset-deltas`. This
(`sendFullIndexOnUpgrade=true`) used to be the behavior in previous
versions, but is mainly useful as a troubleshooting step and causes high
database churn. The new default is `false`.

Bugfixes:

- #6994: "panic: filling Blocks: leveldb: snapshot released" on folder save
- #7002: "Syncing (NaN%, 0 B)" when syncing 0-byte files
- #7008: Filenames containing dots lead to a "The system cannot find the file specified" sync error
- #7021: Tests fail when building the Alpine pkg on aarch64
- #7034: Folders getting stuck in "Syncing" after a20c6ca after doing changes when folders are paused
- #7035: Devices Announcing LAN addresses even with AnnounceLANAddresses set to off/false
- #7036: Shutting Syncthing down while pushing files to multiple devices corrupts the database?

Enhancements:

- #6982: Disable full index transmission on upgrade
- #7020: Do not disconnect when changing folder settings
- #7028: Detect and optionally report non-fatal failures

2ba3be5

2020-10-21 20:21

下载

v1.11.0-rc.1

d828adb

2020-10-08 23:37

下载

v1.10.0

This release adds the config option `announceLANAddresses` to enable
(the default) or disable announcing private (RFC1918) LAN IP addresses
to global discovery.

Bugfixes:

- #6880: fatal error: concurrent map iteration and map write
- #6917: Reconsider db check on upgrade
- #6930: Can't add new folder with versioning enabled, `Cleanup Interval` field lacks default value
- #6940: TypeError: Object doesn't support property or method 'startsWith' in IE 11 / Windows 7
- #6943: Missing strings for translation
- #6961: Accounting issue with receive-only deleted files causing spurious 95% completion for remote devices
- #6968: Very slow scans on Windows in 1.9.0
- #6972: Deleting a folder containing a symlink results in a permanently out of sync on windows
- #6973: given name "~syncthing~xxx.tmp" differs from name in filesystem "~syncthing~XXX.tmp"

Enhancements:

- #4277: Announce internal and external address to the global discovery service, encrypted
- #6734: Consider moving configuration to a proto contract
- #6928: Announce LAN addresses to global discovery

Other issues:

- #5436: MultiArch for Docker

aa65c6f

2020-09-16 01:38

下载

v1.10.0-rc.3

This release adds the config option `announceLANAddresses` to enable
(the default) or disable announcing private (RFC1918) LAN IP addresses
to global discovery.

Bugfixes:

- #6880: fatal error: concurrent map iteration and map write
- #6917: Reconsider db check on upgrade
- #6930: Can't add new folder with versioning enabled, `Cleanup Interval` field lacks default value
- #6940: TypeError: Object doesn't support property or method 'startsWith' in IE 11 / Windows 7
- #6943: Missing strings for translation
- #6961: Accounting issue with receive-only deleted files causing spurious 95% completion for remote devices
- #6968: Very slow scans on Windows in 1.9.0
- #6972: Deleting a folder containing a symlink results in a permanently out of sync on windows
- #6973: given name "~syncthing~xxx.tmp" differs from name in filesystem "~syncthing~XXX.tmp"

Enhancements:

- #4277: Announce internal and external address to the global discovery service, encrypted
- #6734: Consider moving configuration to a proto contract
- #6928: Announce LAN addresses to global discovery

Other issues:

- #5436: MultiArch for Docker

aa65c6f

2020-09-16 01:38

下载

v1.10.0-rc.2

8210466

2020-09-12 13:45

下载

v1.10.0-rc.1

08bebbe

2020-09-10 16:54

下载

v1.9.0

This release adds the advanced folder option `caseSensitiveFS`
(https://docs.syncthing.net/advanced/folder-caseSensitiveFS.html) to
disable the new safe handling of case insensitive filesystems.

Bugfixes:

- #1787: Case-only renames break stuff
- #5708: Properly handle upper-/lowercase-only file name collisions
- #6613: TestWatchRename test fails on FreeBSD.
- #6793: Error status should take precedence over Local Additions
- #6850: Global state incorrect when ignoring local change
- #6864: Folder incorrectly marked “Up to Date” after switching from “Receive Only” to “Send & Receive”
- #6867: Certificate error when built with Go 1.15
- #6886: chmod permission after editing .stignore via WebUI not preserved
- #6889: test failures with Go 1.15
- #6892: Syncthing 1.8.0 trying to connect via wrong network route
- #6898: tests in TestCopyRange fail on ppc64le with "inappropriate ioctl for device"
- #6908: NAT service fails to terminate during Shutdown
- #6910: Local Additions when deleting file after changing folder type from SR to RO
- #6922: Auto accepted folders not saved
- #6938: Modifying config during first scan corrupts folder state

Enhancements:

- #2739: Syncthing should be case insensitive by default
- #5579: Avoid anti-aliasing artifacts for svg device icons
- #6873: Don't fail dirs in receive-only folders that were removed elsewhere but exist locally

3943873

2020-08-28 00:33

下载

v1.9.0-rc.5

This release adds the advanced folder option `caseSensitiveFS`
(https://docs.syncthing.net/advanced/folder-caseSensitiveFS.html) to
disable the new safe handling of case insensitive filesystems.

Bugfixes:

- #1787: Case-only renames break stuff
- #5708: Properly handle upper-/lowercase-only file name collisions
- #6613: TestWatchRename test fails on FreeBSD.
- #6793: Error status should take precedence over Local Additions
- #6850: Global state incorrect when ignoring local change
- #6864: Folder incorrectly marked “Up to Date” after switching from “Receive Only” to “Send & Receive”
- #6867: Certificate error when built with Go 1.15
- #6886: chmod permission after editing .stignore via WebUI not preserved
- #6889: test failures with Go 1.15
- #6892: Syncthing 1.8.0 trying to connect via wrong network route
- #6898: tests in TestCopyRange fail on ppc64le with "inappropriate ioctl for device"
- #6908: NAT service fails to terminate during Shutdown
- #6910: Local Additions when deleting file after changing folder type from SR to RO
- #6922: Auto accepted folders not saved
- #6938: Modifying config during first scan corrupts folder state

Enhancements:

- #2739: Syncthing should be case insensitive by default
- #5579: Avoid anti-aliasing artifacts for svg device icons
- #6873: Don't fail dirs in receive-only folders that were removed elsewhere but exist locally

3943873

2020-08-28 00:33

下载

v1.9.0-rc.4

This release adds the advanced folder option `caseSensitiveFS`
(https://docs.syncthing.net/advanced/folder-caseSensitiveFS.html) to
disable the new safe handling of case insensitive filesystems.

Bugfixes:

- #1787: Case-only renames break stuff
- #5708: Properly handle upper-/lowercase-only file name collisions
- #6613: TestWatchRename test fails on FreeBSD.
- #6793: Error status should take precedence over Local Additions
- #6850: Global state incorrect when ignoring local change
- #6864: Folder incorrectly marked “Up to Date” after switching from “Receive Only” to “Send & Receive”
- #6867: Certificate error when built with Go 1.15
- #6886: chmod permission after editing .stignore via WebUI not preserved
- #6889: test failures with Go 1.15
- #6892: Syncthing 1.8.0 trying to connect via wrong network route
- #6898: tests in TestCopyRange fail on ppc64le with "inappropriate ioctl for device"
- #6908: NAT service fails to terminate during Shutdown
- #6910: Local Additions when deleting file after changing folder type from SR to RO

Enhancements:

- #2739: Syncthing should be case insensitive by default
- #5579: Avoid anti-aliasing artifacts for svg device icons
- #6873: Don't fail dirs in receive-only folders that were removed elsewhere but exist locally

675b535

2020-08-21 18:35

下载

v1.9.0-rc.3

v1.9.0

This release adds the advanced folder option `caseSensitiveFS`
(https://docs.syncthing.net/advanced/folder-caseSensitiveFS.html) to
disable the new safe handling of case insensitive filesystems.

Bugfixes:

- #1787: Case-only renames break stuff
- #5708: Properly handle upper-/lowercase-only file name collisions
- #6613: TestWatchRename test fails on FreeBSD.
- #6793: Error status should take precedence over Local Additions
- #6850: Global state incorrect when ignoring local change
- #6864: Folder incorrectly marked “Up to Date” after switching from “Receive Only” to “Send & Receive”
- #6867: Certificate error when built with Go 1.15
- #6886: chmod permission after editing .stignore via WebUI not preserved
- #6889: test failures with Go 1.15
- #6892: Syncthing 1.8.0 trying to connect via wrong network route
- #6898: tests in TestCopyRange fail on ppc64le with "inappropriate ioctl for device"
- #6908: NAT service fails to terminate during Shutdown

Enhancements:

- #2739: Syncthing should be case insensitive by default
- #5579: Avoid anti-aliasing artifacts for svg device icons
- #6873: Don't fail dirs in receive-only folders that were removed elsewhere but exist locally

f79e980

2020-08-20 17:57

下载

v1.9.0-rc.2

This release adds the advanced folder option `caseSensitiveFS`
(https://docs.syncthing.net/advanced/folder-caseSensitiveFS.html) to
disable the new safe handling of case insensitive filesystems.

Bugfixes:

- #1787: Case-only renames break stuff
- #5708: Properly handle upper-/lowercase-only file name collisions
- #6613: TestWatchRename test fails on FreeBSD.
- #6793: Error status should take precedence over Local Additions
- #6850: Global state incorrect when ignoring local change
- #6864: Folder incorrectly marked “Up to Date” after switching from “Receive Only” to “Send & Receive”
- #6867: Certificate error when built with Go 1.15
- #6886: chmod permission after editing .stignore via WebUI not preserved
- #6892: Syncthing 1.8.0 trying to connect via wrong network route
- #6898: tests in TestCopyRange fail on ppc64le with "inappropriate ioctl for device"

Enhancements:

- #2739: Syncthing should be case insensitive by default
- #5579: Avoid anti-aliasing artifacts for svg device icons

cbbc262

2020-08-19 19:13

下载

v1.9.0-rc.1

d0c6c18

2020-08-18 19:11

下载

v1.8.0

This release:

- adds the experimental `copyRangeMethod` config on folders, for use on
  filesystems with copy-on-write support. Please see
  https://docs.syncthing.net/advanced/folder-copyrangemethod.html for
  details.

- adds TCP hole punching, used to establish high performance TCP
  connections in certain NAT scenarios where only relay or QUIC
  connections could be used previously.

- adds a configuration to file versioning for how often to run cleanup.
  This defaults to once an hour, but is configurable from very
  frequently to never.

Bugfixes:

- #5425: Allow editing ignore patterns texterea in GUI's folder dialog even when #include fails
- #6733: strelaysrv can't propely unmarshall a response when joining a pool
- #6784: Remote device completion 100% while it is actually syncing
- #6816: fatal error: concurrent map read and map write
- #6823: Syncthing 1.7.0 performs UPnP with NAT traversal disabled

Enhancements:

- #4259: Attempt TCP hole punching
- #4271: Make use of filesystems that can handle copies efficiently.
- #6075: Feature: API check sync status of folder[s]
- #6313: Improving disk access control in folders with file versioning
- #6565: Create versioning directory recursively (creating parents as necessary)
- #6795: Don't warn encountering an invalid path separator for deleted items
- #6807: "File Pull Order" should be disabled (greyed out) for "Send Only" folders in the GUI
- #6832: Support running syncthing Docker image as non-root user

89946b2

2020-08-04 05:24

下载

v1.8.0-rc.4

This release:

- adds the experimental `copyRangeMethod` config on folders, for use on
  filesystems with copy-on-write support. Please see
  https://docs.syncthing.net/advanced/folder-copyrangemethod.html for
  details.

- adds TCP hole punching, used to establish high performance TCP
  connections in certain NAT scenarios where only relay or QUIC
  connections could be used previously.

- adds a configuration to file versioning for how often to run cleanup.
  This defaults to once an hour, but is configurable from very
  frequently to never.

Bugfixes:

- #5425: Allow editing ignore patterns texterea in GUI's folder dialog even when #include fails
- #6733: strelaysrv can't propely unmarshall a response when joining a pool
- #6784: Remote device completion 100% while it is actually syncing
- #6816: fatal error: concurrent map read and map write
- #6823: Syncthing 1.7.0 performs UPnP with NAT traversal disabled

Enhancements:

- #4259: Attempt TCP hole punching
- #4271: Make use of filesystems that can handle copies efficiently.
- #6075: Feature: API check sync status of folder[s]
- #6313: Improving disk access control in folders with file versioning
- #6565: Create versioning directory recursively (creating parents as necessary)
- #6795: Don't warn encountering an invalid path separator for deleted items
- #6807: "File Pull Order" should be disabled (greyed out) for "Send Only" folders in the GUI
- #6832: Support running syncthing Docker image as non-root user

89946b2

2020-08-04 05:24

下载

v1.8.0-rc.3

This release:

- adds the experimental `copyRangeMethod` config on folders, for use on
  filesystems with copy-on-write support. Please see
  https://docs.syncthing.net/advanced/folder-copyrangemethod.html for
  details.

- adds TCP hole punching, used to establish high performance TCP
  connections in certain NAT scenarios where only relay or QUIC
  connections could be used previously.

- adds a configuration to file versioning for how often to run cleanup.
  This defaults to once an hour, but is configurable from very
  frequently to never.

Bugfixes:

- #5425: Allow editing ignore patterns texterea in GUI's folder dialog even when #include fails
- #6733: strelaysrv can't propely unmarshall a response when joining a pool
- #6784: Remote device completion 100% while it is actually syncing
- #6816: fatal error: concurrent map read and map write
- #6823: Syncthing 1.7.0 performs UPnP with NAT traversal disabled

Enhancements:

- #4259: Attempt TCP hole punching
- #4271: Make use of filesystems that can handle copies efficiently.
- #6075: Feature: API check sync status of folder[s]
- #6313: Improving disk access control in folders with file versioning
- #6565: Create versioning directory recursively (creating parents as necessary)
- #6795: Don't warn encountering an invalid path separator for deleted items
- #6807: "File Pull Order" should be disabled (greyed out) for "Send Only" folders in the GUI
- #6832: Support running syncthing Docker image as non-root user

4faa588

2020-07-28 18:07

下载

flyfield/syncthing .gitee-modal { width: 500px !important; }

搜索帮助

flyfield/syncthing