README.md · 马青宇/plat-raspi

12月28日，「开源中国源创会年终盛典」珠海站再次回归！点击免费报名参会

forked from YingyiTech/plat-raspi

关闭

加入 Gitee

与超过 1200万开发者一起发现、参与优秀开源项目，私有仓库也完全免费：）

免费加入

文件

克隆/下载

README.md 977 Bytes

一键复制编辑原始数据按行查看历史

提交于 2020-01-10 10:20 . Version submitted for review

# raspi

Raspberry Pi 3B+ platform

In order to compile an application that will run on the Raspberry Pi 3B+, please
select/deselect the following options in the make menuconfig:
- Architecture Selection --> Architecture --> select: Arrmv8 compatible (64 bits)
- Architecture Selection --> Processor Optimization --> select: Generic Armv8 Cortex A53
- Architecture Selection --> deselect: Workaround for Cortex-A73 erratum
- Platform Configuration --> select: Raspberry Pi 3B+
- Library Configuration --> ukboot --> deselect: Show Unikraft banner (this is to minimize boot time)
- Build Options --> select: Drop unused functions and data

Once built, in a blank SD card formated to FAT32, copy the generated kernel8.img Unikraft image (without changing
the name of the image file, as otherwise the Raspberry Pi's bootloader will not recongize it), plus the four files
that are inside the plats/raspi/bootfiles folder (i.e., bootcode.bin, config.txt, fixup.dat, and start.elf).

马建仓 AI 助手

尝试更多

代码解读

代码找茬

代码优化

https://gitee.com/zlaazlaa/plat-raspi.git

git@gitee.com:zlaazlaa/plat-raspi.git

zlaazlaa

plat-raspi

master

马青宇/plat-raspi

简介

发行版

贡献者

近期动态

马青宇/plat-raspi .gitee-modal { width: 500px !important; }

简介

发行版

贡献者

近期动态

搜索帮助

马青宇/plat-raspi