代码拉取完成，页面将自动刷新
同步操作将从 大大/gebi1-redpill 强制同步，此操作会覆盖自 Fork 仓库以来所做的任何修改，且无法恢复！！！
确定后同步将在后台操作，完成时将刷新页面，请耐心等待。
#!/bin/bash
#
# Author :
# Date : 220603
# Version : 0.9.0.2
#
#
# User Variables :
rploaderver="0.9.0.2"
build="develop"
rploaderfile="https://raw.githubusercontent.com/pocopico/tinycore-redpill/$build/rploader.sh"
rploaderrepo="https://github.com/pocopico/tinycore-redpill/raw/$build/"
redpillextension="https://github.com/pocopico/rp-ext/raw/main/redpill/rpext-index.json"
modextention="https://github.com/pocopico/rp-ext/raw/main/rpext-index.json"
modalias4="https://raw.githubusercontent.com/pocopico/tinycore-redpill/$build/modules.alias.4.json.gz"
modalias3="https://raw.githubusercontent.com/pocopico/tinycore-redpill/$build/modules.alias.3.json.gz"
dtcbin="https://raw.githubusercontent.com/pocopico/tinycore-redpill/$build/dtc"
dtsfiles="https://raw.githubusercontent.com/pocopico/tinycore-redpill/$build"
timezone="UTC"
ntpserver="pool.ntp.org"
fullupdatefiles="custom_config.json custom_config_jun.json global_config.json modules.alias.3.json.gz modules.alias.4.json.gz rpext-index.json user_config.json dtc rploader.sh ds1621p.dts ds920p.dts"
# END Do not modify after this line
######################################################################################################
function history() {
cat <<EOF
--------------------------------------------------------------------------------------
0.7.0.0 Added build for version greater than 42218
0.7.0.1 Added required extension parsing adding and downloading
0.7.0.2 Added usb patch in patchdtc
0.7.0.3 Added portnumber on patchdtc
0.7.0.4 Make sure that local cache folder is created early in the process
0.7.0.5 Enabled interactive
0.7.0.6 Added save/restore session functions
0.7.0.7 Added a check date function
0.7.0.8 Added the ability to use local dtb file
0.7.0.9 Added flyride satamap review
0.7.1.0 Added the history, version and enhanced patchdtc function
0.7.1.1 Added a syntaxcheck function
0.7.1.2 Added sync time with NTP server : pool.ntp.org (Set timezone and ntpserver variables accordingly )
0.7.1.3 Added the option to create JUN mod loader (By Jumkey)
0.7.1.4 Added the use of the additional custom_config_jun.json for JUN mod loader creation
0.7.1.5 Updated satamap function to support higher the 9 port counts per HBA.
0.7.1.6 Updated satamap function to fix the broken q35 KVM controller, and to stop scanning for CD-ROM's
0.7.1.7 Updated serialgen function to include the option for using the realmac
0.7.1.8 Updated satamap function to fine tune SATA port identification and identify SATABOOT
0.7.1.9 Updated patchdtc function to fix wrong port identification for VMware hosted systems
0.8.0.0 Stable version. All new features will be moved to develop repo
0.9.0.0 Development version. Moving all new features to development build
0.9.0.1 Updated postupdate to facilitate update to update2
0.9.0.2 Added system monitor function
--------------------------------------------------------------------------------------
EOF
}
function monitor() {
loaderdisk="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)"
mount /dev/${loaderdisk}1
mount /dev/${loaderdisk}2
while true; do
clear
echo -e "-------------------------------System Information----------------------------"
echo -e "Hostname:\t\t"$(hostname) "uptime:\t\t\t"$(uptime | awk '{print $3,$4}' | sed 's/,//')
echo -e "Manufacturer:\t\t"$(cat /sys/class/dmi/id/chassis_vendor) "Product Name:\t\t"$(cat /sys/class/dmi/id/product_name)
echo -e "Version:\t\t"$(cat /sys/class/dmi/id/product_version)
echo -e "Serial Number:\t\t"$(sudo cat /sys/class/dmi/id/product_serial)
echo -e "Machine Type:\t\t"$(
vserver=$(lscpu | grep Hypervisor | wc -l)
if [ $vserver -gt 0 ]; then echo "VM"; else echo "Physical"; fi
) "Operating System:\t"$(grep PRETTY_NAME /etc/os-release | awk -F \= '{print $2}')
echo -e "Kernel:\t\t\t"$(uname -r)
echo -e ""$(lscpu | head -1)"\t" "Processor Name:\t\t"$(awk -F':' '/^model name/ {print $2}' /proc/cpuinfo | uniq | sed -e 's/^[ \t]*//')
echo -e "Active Users:\t\t"$(who -u | cut -d ' ' -f1 | grep -v USER | xargs -n1)
echo -e "System Main IP:\t\t"$(ifconfig | grep inet | awk '{print $2}' | awk -F \: '{print $2}')
[ $(ps -ef | grep -i sshd | wc -l) -gt 0 ] && echo -e "SSHD connections ready" || echo -e "SSHD connections not ready"
echo -e "-------------------------------Loader boot entries------------------------------"
grep -i menuentry /mnt/${loaderdisk}1/boot/grub/grub.cfg | awk -F \' '{print $2}'
echo -e "-------------------------------CPU/Memory Usage------------------------------"
echo -e "Memory Usage:\t"$(free | awk '/Mem/{printf("%.2f%"), $3/$2*100}')
echo -e "Swap Usage:\t"$(free | awk '/Swap/{printf("%.2f%"), $3/$2*100}')
echo -e "CPU Usage:\t"$(cat /proc/stat | awk '/cpu/{printf("%.2f%\n"), ($2+$4)*100/($2+$4+$5)}' | awk '{print $0}' | head -1)
echo -e "-------------------------------Disk Usage >80%-------------------------------"
df -Ph | grep -v loop
[ $(lscpu | grep Hypervisor | wc -l) -gt 0 ] && echo "$(hostname) is a VM"
echo "Press ctrl-c to exti"
sleep 10
done
}
function syntaxcheck() {
if [ $# -lt 2 ] && [ "$1" == "download" ] || [ "$1" == "build" ] || [ "$1" == "ext" ] || [ "$1" == "restoresession" ] || [ "$1" == "listmods" ] || [ "$1" == "serialgen" ] || [ "$1" == "patchdtc" ] || [ "$1" == "postupdate" ]; then
echo "Error : Number of arguments : $#, options $@ "
case $1 in
download)
echo "Syntax error, You have to specify one of the existing platforms" && getPlatforms
;;
build)
echo "Syntax error, You have to specify one of the existing platforms" && getPlatforms
;;
ext)
echo "Syntax error, You have to specify one of the existing platforms, the action and the extension URL"
echo "example:"
echo "rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json"
echo "or for auto detect use"
echo "rploader.sh ext apollolake-7.0.1-42218 auto"
;;
restoresession)
echo "Syntax error, You have to specify one of the existing platforms" && getPlatforms
;;
listmods)
echo "Syntax error, You have to specify one of the existing platforms" && getPlatforms
;;
serialgen)
echo "Syntax error, You have to specify one of the existing models"
echo "DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ FS6400 DVA3219 DVA3221 DS1621+"
;;
patchdtc)
echo "Syntax error, You have to specify one of the existing platforms" && getPlatforms
;;
postupdate)
echo "Syntax error, You have to specify one of the existing platforms" && getPlatforms
;;
*)
echo "Syntax error, not valid arguments or not enough options"
showhelp
;;
esac
exit 99
else
return
fi
}
function version() {
shift 1
echo $rploaderver
[ "$1" == "history" ] && history
}
function savesession() {
lastsessiondir="/mnt/${tcrppart}/lastsession"
echo -n "Saving user session for future use. "
[ ! -d ${lastsessiondir} ] && sudo mkdir ${lastsessiondir}
echo -n "Saving current extensions "
cat /home/tc/redpill-load/custom/extensions/*/*json | jq '.url' >${lastsessiondir}/extensions.list
[ -f ${lastsessiondir}/extensions.list ] && echo " -> OK !"
echo -n "Saving current user_config.json "
cp /home/tc/user_config.json ${lastsessiondir}/user_config.json
[ -f ${lastsessiondir}/user_config.json ] && echo " -> OK !"
}
function restoresession() {
lastsessiondir="/mnt/${tcrppart}/lastsession"
if [ -d $lastsessiondir ]; then
echo -n "Found last user session : , restore session ? [yY/nN] : "
read answer
if [ "$answer" == "y" ] || [ "$answer" == "Y" ]; then
if [ -d $lastsessiondir ] && [ -f ${lastsessiondir}/extensions.list ]; then
for extension in $(cat ${lastsessiondir}/extensions.list); do
echo "Adding extension ${extension} "
cd /home/tc/redpill-load/ && ./ext-manager.sh add "$(echo $extension | sed -s 's/"//g' | sed -s 's/,//g')"
done
fi
if [ -d $lastsessiondir ] && [ -f ${lastsessiondir}/user_config.json ]; then
echo "Copying last user_config.json"
cp ${lastsessiondir}/user_config.json /home/tc
fi
fi
else
echo "OK, we will not restore last session"
fi
}
function downloadextractor() {
loaderdisk="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)"
tcrppart="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)3"
local_cache="/mnt/${tcrppart}/auxfiles"
temp_folder="/tmp/synoesp"
if [ -d ${local_cache/extractor /} ] && [ -f ${local_cache}/extractor/scemd ]; then
echo "Found extractor locally cached"
echo "Copying required libraries to local lib directory"
sudo cp /mnt/${tcrppart}/auxfiles/extractor/lib* /lib/
echo "Linking lib to lib64"
[ ! -h /lib64 ] && sudo ln -s /lib /lib64
echo "Copying executable"
sudo cp /mnt/${tcrppart}/auxfiles/extractor/scemd /bin/syno_extract_system_patch
echo "Removing temp folder /tmp/synoesp"
rm -rf $temp_folder
echo "Checking if tool is accessible"
/bin/syno_extract_system_patch 2>&1 >/dev/null
if [ $? -eq 255 ]; then echo "Executed succesfully"; else echo "Cound not execute"; fi
else
echo "Getting required extraction tool"
echo "------------------------------------------------------------------"
echo "Checking tinycore cache folder"
[ -d $local_cache ] && echo "Found tinycore cache folder, linking to home/tc/custom-module" && [ ! -h /home/tc/custom-module ] && sudo ln -s $local_cache /home/tc/custom-module
echo "Creating temp folder /tmp/synoesp"
mkdir ${temp_folder}
if [ -d /home/tc/custom-module ] && [ -f /home/tc/custom-module/*42218*.pat ]; then
patfile=$(ls /home/tc/custom-module/*42218*.pat | head -1)
echo "Found custom pat file ${patfile}"
echo "Processing old pat file to extract required files for extraction"
tar -C${temp_folder} -xf /${patfile} rd.gz
else
curl --location https://global.download.synology.com/download/DSM/release/7.0.1/42218/DSM_DS3622xs%2B_42218.pat --output /home/tc/oldpat.tar.gz
[ -f /home/tc/oldpat.tar.gz ] && tar -C${temp_folder} -xf /home/tc/oldpat.tar.gz rd.gz
fi
echo "Entering synoesp"
cd ${temp_folder}
xz -dc <rd.gz >rd 2>/dev/null || echo "extract rd.gz"
echo "finish"
cpio -idm <rd 2>&1 || echo "extract rd"
mkdir extract
mkdir /mnt/${tcrppart}/auxfiles && cd /mnt/${tcrppart}/auxfiles
echo "Copying required files to local cache folder for future use"
mkdir /mnt/${tcrppart}/auxfiles/extractor
for file in usr/lib/libcurl.so.4 usr/lib/libmbedcrypto.so.5 usr/lib/libmbedtls.so.13 usr/lib/libmbedx509.so.1 usr/lib/libmsgpackc.so.2 usr/lib/libsodium.so usr/lib/libsynocodesign-ng-virtual-junior-wins.so.7 usr/syno/bin/scemd; do
echo "Copying $file to /mnt/${tcrppart}/auxfiles"
cp $file /mnt/${tcrppart}/auxfiles/extractor
done
echo "Copying required libraries to local lib directory"
sudo cp /mnt/${tcrppart}/auxfiles/extractor/lib* /lib/
echo "Linking lib to lib64"
[ ! -h /lib64 ] && sudo ln -s /lib /lib64
echo "Copying executable"
sudo cp /mnt/${tcrppart}/auxfiles/extractor/scemd /bin/syno_extract_system_patch
echo "Removing temp folder /tmp/synoesp"
rm -rf $temp_folder
echo "Checking if tools is accessible"
/bin/syno_extract_system_patch
if [ $? -eq 255 ]; then echo "Executed succesfully"; else echo "Cound not execute"; fi
fi
}
function processpat() {
loaderdisk="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)"
tcrppart="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)3"
local_cache="/mnt/${tcrppart}/auxfiles"
temp_pat_folder="/tmp/pat"
if [ "${TARGET_PLATFORM}" = "apollolake" ]; then
SYNOMODEL="ds918p_$TARGET_REVISION" && MODEL="DS918+"
elif [ "${TARGET_PLATFORM}" = "bromolow" ]; then
SYNOMODEL="ds3615xs_$TARGET_REVISION" && MODEL="DS3615xs"
elif [ "${TARGET_PLATFORM}" = "broadwell" ]; then
SYNOMODEL="ds3617xs_$TARGET_REVISION" && MODEL="DS3617xs"
elif [ "${TARGET_PLATFORM}" = "broadwellnk" ]; then
SYNOMODEL="ds3622xsp_$TARGET_REVISION" && MODEL="DS3622xs+"
elif [ "${TARGET_PLATFORM}" = "v1000" ]; then
SYNOMODEL="ds1621p_$TARGET_REVISION" && MODEL="DS1621+"
elif [ "${TARGET_PLATFORM}" = "denverton" ]; then
SYNOMODEL="dva3221_$TARGET_REVISION" && MODEL="DVA3221"
elif [ "${TARGET_PLATFORM}" = "geminilake" ]; then
SYNOMODEL="ds920p_$TARGET_REVISION" && MODEL="DS920+"
fi
if [ ! -d "${temp_pat_folder}" ]; then
echo "Creating temp folder ${temp_pat_folder} "
mkdir ${temp_pat_folder} && cd ${temp_pat_folder}
fi
echo "Checking for cached pat file"
[ -d $local_cache ] && echo "Found tinycore cache folder, linking to home/tc/custom-module" && [ ! -h /home/tc/custom-module ] && sudo ln -s $local_cache /home/tc/custom-module
if [ -d ${local_cache} ] && [ -f ${local_cache}/*${SYNOMODEL}*.pat ] || [ -f ${local_cache}/*${MODEL}*${TARGET_REVISION}*.pat ]; then
[ -f /home/tc/custom-module/*${SYNOMODEL}*.pat ] && patfile=$(ls /home/tc/custom-module/*${SYNOMODEL}*.pat | head -1)
[ -f ${local_cache}/*${MODEL}*${TARGET_REVISION}*.pat ] && patfile=$(ls /home/tc/custom-module/*${MODEL}*${TARGET_REVISION}*.pat | head -1)
echo "Found locally cached pat file ${patfile}"
testarchive "${patfile}"
if [ ${isencrypted} = "no" ]; then
echo "File ${patfile} is already unencrypted"
echo "Copying file to /home/tc/redpill-load/cache folder"
cp ${patfile} /home/tc/redpill-load/cache/
elif [ ${isencrypted} = "yes" ]; then
[ -f /home/tc/redpill-load/cache/${SYNOMODEL}.pat ] && testarchive /home/tc/redpill-load/cache/${SYNOMODEL}.pat
if [ -f /home/tc/redpill-load/cache/${SYNOMODEL}.pat ] && [ ${isencrypted} = "no" ]; then
echo "Unecrypted file is already cached in : /home/tc/redpill-load/cache/${SYNOMODEL}.pat"
patfile="/home/tc/redpill-load/cache/${SYNOMODEL}.pat"
else
echo "Extracting encrypted pat file : ${patfile} to ${temp_pat_folder}"
sudo /bin/syno_extract_system_patch ${patfile} ${temp_pat_folder} || echo "extract latest pat"
echo "Creating unecrypted pat file ${SYNOMODEL}.pat to /home/tc/redpill-load/cache folder "
mkdir -p /home/tc/redpill-load/cache/
cd ${temp_pat_folder} && tar -czf /home/tc/redpill-load/cache/${SYNOMODEL}.pat ./
patfile="/home/tc/redpill-load/cache/${SYNOMODEL}.pat"
fi
else
echo "Something went wrong, please check cache files"
exit 99
fi
tar xvf /home/tc/redpill-load/cache/${SYNOMODEL}.pat ./VERSION && . ./VERSION && rm ./VERSION
os_sha256=$(sha256sum ${patfile} | awk '{print $1}')
echo "Pat file sha256sum is : $os_sha256"
echo -n "Checking config file existence -> "
if [ -f "/home/tc/redpill-load/config/$MODEL/${major}.${minor}.${micro}-${buildnumber}/config.json" ]; then
echo "OK"
configfile="/home/tc/redpill-load/config/$MODEL/${major}.${minor}.${micro}-${buildnumber}/config.json"
else
echo "No config file found, please use the proper repo, clean and download again"
exit 99
fi
echo -n "Editing config file -> "
sed -i "/\"os\": {/!b;n;n;n;c\"sha256\": \"$os_sha256\"" ${configfile}
echo -n "Verifying config file -> "
verifyid="$(cat ${configfile} | jq -r -e '.os .sha256')"
if [ "$os_sha256" == "$verifyid" ]; then
echo "OK ! "
else
echo "config file, os sha256 verify FAILED, check ${configfile} "
exit 99
fi
echo "Clearing temp folders"
sudo rm -rf ${temp_pat_folder}
return
else
echo "Could not find pat file locally cached"
configdir="/home/tc/redpill-load/config/${MODEL}/${TARGET_VERSION}-${TARGET_REVISION}"
configfile="${configdir}/config.json"
pat_url=$(cat ${configfile} | jq '.os .pat_url' | sed -s 's/"//g')
echo -e "Configdir : $configdir \nConfigfile: $configfile \nPat URL : $pat_url"
echo "Downloading pat file from URL : ${pat_url} "
if [ $(df -h /${local_cache} | grep mnt | awk '{print $4}' | cut -c 1-3) -le 370 ]; then
echo "No adequate space on ${local_cache} to download file into cache folder, clean up the space and restart"
exit 99
fi
[ -n $pat_url ] && curl --location ${pat_url} -o "/${local_cache}/${SYNOMODEL}.pat"
patfile="/${local_cache}/${SYNOMODEL}.pat"
if [ -f ${patfile} ]; then
testarchive ${patfile}
else
echo "Failed to download PAT file $patfile from ${pat_url} "
exit 99
fi
if [ "${isencrypted}" = "yes" ]; then
echo "File ${patfile}, has been cached but its encrypted, re-running decrypting process"
processpat
else
return
fi
fi
}
function testarchive() {
archive="$1"
archiveheader="$(od -bc ${archive} | head -1 | awk '{print $3}')"
case ${archiveheader} in
105)
echo "${archive}, is a Tar file"
isencrypted="no"
return 0
;;
255)
echo "File ${archive}, is encrypted"
isencrypted="yes"
return 1
;;
213)
echo "File ${archive}, is a compressed tar"
isencrypted="no"
;;
*)
echo "Could not determine if file ${archive} is encrypted or not, maybe corrupted"
ls -ltr ${archive}
echo ${archiveheader}
exit 99
;;
esac
}
function addrequiredexts() {
echo "Processing add_extensions entries found on custom_config.json file : ${EXTENSIONS}"
for extension in ${EXTENSIONS_SOURCE_URL}; do
echo "Adding extension ${extension} "
cd /home/tc/redpill-load/ && ./ext-manager.sh add "$(echo $extension | sed -s 's/"//g' | sed -s 's/,//g')"
done
for extension in ${EXTENSIONS}; do
echo "Updating extension : ${extension} contents for model : ${SYNOMODEL} "
cd /home/tc/redpill-load/ && ./ext-manager.sh _update_platform_exts ${SYNOMODEL} ${extension}
done
if [ ${TARGET_PLATFORM} = "geminilake" ] || [ ${TARGET_PLATFORM} = "v1000" ]; then
patchdtc
fi
}
function installapache() {
echo "Installing apache2 and php module"
tce-load -iw apache2.4.tcz
tce-load -iw apache2.4-doc.tcz
tce-load -iw php-8.0-mod.tcz
tce-load -iw libnghttp2.tcz
#cd /usr/local/
#sudo tar xvf /home/tc/tcrphtml/tc.apache.tar.gz etc/httpd/
#apachectl start
}
function postupdate() {
loaderdisk="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)"
cd /home/tc
echo "Creating temp ramdisk space" && mkdir /home/tc/ramdisk
echo "Mounting partition ${loaderdisk}1}" && sudo mount /dev/${loaderdisk}1
echo "Mounting partition ${loaderdisk}2}" && sudo mount /dev/${loaderdisk}2
cd /home/tc/ramdisk
echo "Extracting update ramdisk" && unlzma -c /mnt/${loaderdisk}2/rd.gz | cpio -idm 2>&1 >/dev/null
. ./etc.defaults/VERSION && echo "Found Version : ${productversion}-${buildnumber}-${smallfixnumber}"
echo -n "Do you want to use this for the loader ? [yY/nN] : "
read answer
if [ "$answer" == "y" ] || [ "$answer" == "Y" ]; then
echo "Extracting redpill ramdisk" && cat /mnt/${loaderdisk}1/rd.gz | cpio -idm
. ./etc.defaults/VERSION && echo "The new smallupdate version will be : ${productversion}-${buildnumber}-${smallfixnumber}"
echo -n "Do you want to use this for the loader ? [yY/nN] : "
read answer
if [ "$answer" == "y" ] || [ "$answer" == "Y" ]; then
echo "Recreating ramdisk " && find . 2>/dev/null | cpio -o -H newc -R root:root | xz -9 --format=lzma >../rd.gz
cd ..
echo "Adding fake sign" && dd if=/dev/zero of=rd.gz bs=68 count=1 conv=notrunc oflag=append
echo "Putting ramdisk back to the loader partition ${loaderdisk}1" && sudo cp -f rd.gz /mnt/${loaderdisk}1/rd.gz
echo "Removing temp ramdisk space " && rm -rf ramdisk
echo "Done"
else
exit 0
fi
fi
}
function postupdatev1() {
echo "Mounting root to get the latest dsmroot patch in /.syno/patch "
if [ ! -f /home/tc/redpill-load/user_config.json ]; then
[ ! -h /home/tc/redpill-load/user_config.json ] && ln -s /home/tc/user_config.json /home/tc/redpill-load/user_config.json
fi
if [ $(mount | grep -i dsmroot | wc -l) -le 0 ]; then
mountdsmroot
[ $(mount | grep -i dsmroot | wc -l) -le 0 ] && echo "Failed to mount DSM root, cannot continue the postupdate process, returning" && return
else
echo "Already mounted"
fi
echo "Clearing last created loader "
rm -f redpill-load/loader.img
if [ ! -d "/lib64" ]; then
echo "/lib64 does not exist, bringing linking /lib"
[ ! -h /lib64 ] && ln -s /lib /lib64
fi
if [ ! -n "$(which bspatch)" ]; then
echo "bspatch does not exist, bringing over from repo"
curl --location "https://raw.githubusercontent.com/pocopico/tinycore-redpill/$build/bspatch" -O
chmod 777 bspatch
sudo mv bspatch /usr/local/bin/
fi
echo "Checking available patch"
if [ -d "/mnt/dsmroot/.syno/patch/" ]; then
cd /mnt/dsmroot/.syno/patch/
. ./VERSION
. ./GRUB_VER
else
echo "Patch directory not found, please remember that you have to run update usign DSM manual upgrade first"
echo "Postupdate is not possible, returning"
return
fi
echo "Found Platform : ${PLATFORM} Model : $MODEL Version : ${major}.${minor}.${micro}-${buildnumber} "
echo -n "Do you want to use this for the loader ? [yY/nN] : "
read answer
if [ "$answer" == "y" ] || [ "$answer" == "Y" ]; then
patfile="$(echo ${MODEL}_${buildnumber} | sed -e 's/\+/p/' | tr '[:upper:]' '[:lower:]').pat"
echo "Creating pat file ${patfile} using contents of : $(pwd) "
[ ! -d "/home/tc/redpill-load/cache" ] && mkdir /home/tc/redpill-load/cache/
tar cfz /home/tc/redpill-load/cache/${patfile} *
os_sha256=$(sha256sum /home/tc/redpill-load/cache/${patfile} | awk '{print $1}')
echo "Created pat file with sha256sum : $os_sha256"
cd /home/tc
else
echo "OK, see you later"
return
fi
echo -n "Checking config file existence -> "
if [ -f "/home/tc/redpill-load/config/$MODEL/${major}.${minor}.${micro}-${buildnumber}/config.json" ]; then
echo "OK"
configfile="/home/tc/redpill-load/config/$MODEL/${major}.${minor}.${micro}-${buildnumber}/config.json"
else
echo "No config file found, please use the proper repo, clean and download again"
exit 99
fi
echo -n "Editing config file -> "
sed -i "/\"os\": {/!b;n;n;n;c\"sha256\": \"$os_sha256\"" ${configfile}
echo -n "Verifying config file -> "
verifyid="$(cat ${configfile} | jq -r -e '.os .sha256')"
if [ "$os_sha256" == "$verifyid" ]; then
echo "OK ! "
else
echo "config file, os sha256 verify FAILED, check ${configfile} "
exit 99
fi
removebundledexts
cd /home/tc/redpill-load/
addrequiredexts
echo "Creating loader ${MODEL} ${major}.${minor}.${micro}-${buildnumber} ... "
sudo ./build-loader.sh ${MODEL} ${major}.${minor}.${micro}-${buildnumber}
loadername="redpill-${MODEL}_${major}.${minor}.${micro}-${buildnumber}"
loaderimg=$(ls -ltr /home/tc/redpill-load/images/${loadername}* | tail -1 | awk '{print $9}')
echo "Moving loader ${loaderimg} to loader.img "
if [ -f "${loaderimg}" ]; then
mv -f $loaderimg loader.img
else
echo "Failed to find loader ${loaderimg}, exiting"
exit 99
fi
if [ ! -n "$(losetup -j loader.img | awk '{print $1}' | sed -e 's/://')" ]; then
echo -n "Setting up loader img loop -> "
sudo losetup -fP ./loader.img
loopdev=$(losetup -j loader.img | awk '{print $1}' | sed -e 's/://')
echo "$loopdev"
else
echo -n "Loop device exists, removing "
losetup -d $(losetup -j loader.img | awk '{print $1}' | sed -e 's/://')
echo -n "Setting up loader img loop -> "
sudo losetup -fP ./loader.img
loopdev=$(losetup -j loader.img | awk '{print $1}' | sed -e 's/://')
fi
echo -n "Mounting loop disks -> "
[ ! -d /home/tc/redpill-load/localdiskp1 ] && mkdir /home/tc/redpill-load/localdiskp1
[ ! -d /home/tc/redpill-load/localdiskp2 ] && mkdir /home/tc/redpill-load/localdiskp2
[ ! -n "$(mount | grep -i localdiskp1)" ] && sudo mount ${loopdev}p1 localdiskp1
[ ! -n "$(mount | grep -i localdiskp2)" ] && sudo mount ${loopdev}p2 localdiskp2
[ -n "mount |grep -i localdiskp1" ] && [ -n "mount |grep -i localdiskp2" ] && echo "mounted succesfully"
echo -n "Mounting loader disk -> "
loaderdisk="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)"
sudo mount /dev/${loaderdisk}1
sudo mount /dev/${loaderdisk}2
[ -n "mount |grep -i ${loaderdisk}1" ] && [ -n "mount |grep -i ${loaderdisk}2" ] && echo "mounted succesfully"
echo -n "Copying loader files -> "
echo -n "rd.gz : "
cp -f /home/tc/redpill-load/localdiskp1/rd.gz /mnt/${loaderdisk}1/rd.gz
cp -f /home/tc/redpill-load/localdiskp2/rd.gz /mnt/${loaderdisk}2/rd.gz
[ "$(sha256sum /home/tc/redpill-load/localdiskp1/rd.gz | awk '{print $1}')" == "$(sha256sum /mnt/${loaderdisk}1/rd.gz | awk '{print $1}')" ] && [ "$(sha256sum /home/tc/redpill-load/localdiskp2/rd.gz | awk '{print $1}')" == "$(sha256sum /mnt/${loaderdisk}2/rd.gz | awk '{print $1}')" ] && echo -n "OK !!!"
echo -n " zImage : "
cp -f /home/tc/redpill-load/localdiskp1/zImage /mnt/${loaderdisk}1/zImage
cp -f /home/tc/redpill-load/localdiskp2/zImage /mnt/${loaderdisk}2/zImage
[ "$(sha256sum /home/tc/redpill-load/localdiskp1/zImage | awk '{print $1}')" == "$(sha256sum /mnt/${loaderdisk}1/zImage | awk '{print $1}')" ] && [ "$(sha256sum /home/tc/redpill-load/localdiskp2/zImage | awk '{print $1}')" == "$(sha256sum /mnt/${loaderdisk}2/zImage | awk '{print $1}')" ] && echo -n "OK !!!"
echo -n " grub.cfg : "
cp -f /home/tc/redpill-load/localdiskp1/boot/grub/grub.cfg /mnt/${loaderdisk}1/boot/grub/grub.cfg
[ "$(sha256sum /home/tc/redpill-load/localdiskp1/boot/grub/grub.cfg | awk '{print $1}')" == "$(sha256sum /mnt/${loaderdisk}1/boot/grub/grub.cfg | awk '{print $1}')" ] && echo "OK !!!"
echo "Creating tinycore entry"
tinyentry | sudo tee --append /mnt/${loaderdisk}1/boot/grub/grub.cfg
echo "Do you want to overwrite your custom.gz as well ? [yY/nN] : "
read answer
if [ "$answer" == "y" ] || [ "$answer" == "Y" ]; then
echo "Copying custom.gz"
cp -f /home/tc/redpill-load/localdiskp1/custom.gz /mnt/${loaderdisk}1/custom.gz
[ "$(sha256sum /home/tc/redpill-load/localdiskp1/custom.gz | awk '{print $1}')" == "$(sha256sum /mnt/${loaderdisk}1/custom.gz | awk '{print $1}')" ] && echo "OK !!!"
else
echo "OK, you should be fine keeping your existing custom.gz"
fi
echo "Cleaning up... "
echo -n "Unmounting loaderdisk ${loaderdisk} -> "
sudo umount /dev/${loaderdisk}1 && sudo umount /dev/${loaderdisk}2
[ -z $(mount | grep -i ${loaderdisk}1) ] && [ -z $(mount | grep -i ${loaderdisk}2) ] && echo "OK !!!"
echo -n "Unmounting loader image ${loopdev} -> "
sudo umount ${loopdev}p1 && sudo umount ${loopdev}p2
[ -z $(mount | grep -i ${loopdev}p1) ] && [ -z $(mount | grep -i ${loopdev}p2) ] && echo "OK !!!"
echo -n "Detaching loop loader image -> "
sudo losetup -d ${loopdev}
[ -z $(losetup | grep -i loader.img) ] && echo "OK !!!"
if [ -f /home/tc/redpill-load/loader.img ]; then
echo -n "Removing loader.img -> "
sudo rm -rf /home/tc/redpill-load/loader.img
[ ! -f /home/tc/redpill-load/loader.img ] && echo "OK !!!"
fi
echo "Unmounting dsmroot -> "
[ ! -z "$(mount | grep -i dsmroot)" ] && sudo umount /mnt/dsmroot
[ -z "$(mount | grep -i dsmroot)" ] && echo "OK !!! "
echo "Done, closing"
}
function removebundledexts() {
echo "Entering redpill-load directory"
cd /home/tc/redpill-load/
echo "Removing bundled exts directories"
for bundledext in $(grep ":" bundled-exts.json | awk '{print $2}' | sed -e 's/"//g' | sed -e 's/,/\n/g'); do
bundledextdir=$(curl --location -s "$bundledext" | jq -r -e '.id')
if [ -d /home/tc/redpill-load/custom/extensions/${bundledextdir} ]; then
echo "Removing : ${bundledextdir}"
sudo rm -rf /home/tc/redpill-load/custom/extensions/${bundledextdir}
fi
done
}
function fullupgrade() {
backupdate="$(date +%Y-%b-%d-%H-%M)"
echo "Performing a full TCRP upgrade"
echo "Warning some of your local files will be moved to /home/tc/old/xxxx.${backupdate}"
[ ! -d /home/tc/old ] && mkdir /home/tc/old
for updatefile in ${fullupdatefiles}; do
echo "Updating ${updatefile}"
sudo mv $updatefile old/${updatefile}.${backupdate}
sudo curl --location "${rploaderrepo}/${updatefile}" -O
done
sudo chown tc:staff $fullupdatefiles
gunzip -f modules.alias.*.gz
sudo chmod 700 rploader.sh
backup
}
function backuploader() {
loaderdisk="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)"
tcrppart="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)3"
homesize=$(du -sh /home/tc | awk '{print $1}')
backupdate="$(date +%Y-%b-%d-%H-%M)"
if [ ! -n "$loaderdisk" ] || [ ! -n "$tcrppart" ]; then
echo "No Loader disk or no TCRP partition found, return"
return
fi
if [ $(df -h /mnt/${tcrppart} | grep mnt | awk '{print $4}' | cut -c 1-3) -le 50 ]; then
echo "No adequate space on TCRP loader partition /mnt/${tcrppart} "
return
fi
echo "Backing up current loader"
echo "Checking backup folder existence"
[ ! -d /mnt/${tcrppart}/backup ] && mkdir /mnt/${tcrppart}/backup
echo "The backup folder holds the following backups"
ls -ltr /mnt/${tcrppart}/backup
echo "Creating backup folder $backupdate"
[ ! -d /mnt/${tcrppart}/backup/${backupdate} ] && mkdir /mnt/${tcrppart}/backup/${backupdate}
echo "Mounting partition 1"
mount /dev/${loaderdisk}1
cd /mnt/${loaderdisk}1
tar cfz /mnt/${tcrppart}/backup/${backupdate}/partition1.tgz *
echo "Mounting partition 2"
mount /dev/${loaderdisk}2
cd /mnt/${loaderdisk}2
tar cfz /mnt/${tcrppart}/backup/${backupdate}/partition2.tgz *
cd
echo "Listing backup files : "
ls -ltr /mnt/${tcrppart}/backup/${backupdate}/
echo "Partition 1 : $(tar tfz /mnt/${tcrppart}/backup/${backupdate}/partition1.tgz | wc -l) files and directories "
echo "Partition 2 : $(tar tfz /mnt/${tcrppart}/backup/${backupdate}/partition2.tgz | wc -l) files and directories "
echo "DONE"
}
function restoreloader() {
loaderdisk="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)"
tcrppart="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)3"
homesize=$(du -sh /home/tc | awk '{print $1}')
PS3="Select backup folder to restore : "
options=""
if [ ! -n "$loaderdisk" ] || [ ! -n "$tcrppart" ]; then
echo "No Loader disk or no TCRP partition found, return"
return
fi
echo "Restoring loader from backup"
echo "The backup folder holds the following backups"
for folder in $(ls /mnt/${tcrppart}/backup | sed -e 's/\///g'); do
options=" $options ${folder}"
echo -n $folder
echo -n "Partition 1 : $(tar tfz /mnt/${tcrppart}/backup/${folder}/partition1.tgz | wc -l) files and directories "
echo "Partition 2 : $(tar tfz /mnt/${tcrppart}/backup/${folder}/partition2.tgz | wc -l) files and directories "
done
select restorefolder in ${options[@]}; do
if [ "$REPLY" == "quit" ]; then
return
fi
if [ -f "/mnt/${tcrppart}/backup/$restorefolder/partition1.tgz" ]; then
echo " Restore folder : $restorefolder"
echo -n "You have chosen ${restorefolder} : "
echo "Folder contains : "
ls -ltr /mnt/${tcrppart}/backup/$restorefolder
echo -n "Do you want to restore [yY/nN] : "
read answer
if [ "$answer" == "y" ] || [ "$answer" == "Y" ]; then
echo restoring $restorefolder
echo "Mounting partition 1"
mount /dev/${loaderdisk}1
echo "Restoring partition1 "
cd /mnt/${loaderdisk}1
tar xfz /mnt/${tcrppart}/backup/${restorefolder}/partition1.tgz *
ls -ltr /mnt/${loaderdisk}1
echo "Mounting partition 2"
mount /dev/${loaderdisk}2
echo "Restoring partition2 "
cd /mnt/${loaderdisk}2
tar xfz /mnt/${tcrppart}/backup/${restorefolder}/partition2.tgz *
ls -ltr /mnt/${loaderdisk}2
return
else
echo "OK, retry "
return
fi
fi
echo "Invalid choice : $REPLY"
done
}
function checkforscsi() {
# Make sure we load SCSI modules if SCSI/RAID/SAS HBAs exist on the system
#
if [ $(lspci -nn | grep -ie "\[0100\]" -ie "\[0104\]" -ie "\[0107\]" | wc -l) -gt 0 ]; then
echo "Found SCSI HBAs, We need to install the SCSI modules"
tce-load -iw scsi-5.10.3-tinycore64.tcz
[ $(losetup | grep -i "scsi-" | wc -l) -gt 0 ] && echo "Succesfully installed SCSI modules"
fi
}
function mountdsmroot() {
# DSM Disks will be linux_raid_member and will have the
# same DSM PARTUUID with the addition of the partition number e.g :
#/dev/sdb1: UUID="629ae3df-7eef-54e3-05d9-49f7b0bbaec7" TYPE="linux_raid_member" PARTUUID="d5ff7cea-01"
#/dev/sdb2: UUID="260b3a01-ff65-a527-05d9-49f7b0bbaec7" TYPE="linux_raid_member" PARTUUID="d5ff7cea-02"
# So a command like the below will list the first partition of a DSM disk
#blkid /dev/sd* |grep -i raid | awk '{print $1 " " $4}' |grep UUID | grep "\-01" | awk -F ":" '{print $1}'
checkforscsi
dsmrootdisk="$(blkid /dev/sd* | grep -i raid | awk '{print $1 " " $4}' | grep UUID | grep sd[a-z]1 | head -1 | awk -F ":" '{print $1}')"
# OLD DSM
#dsmrootdisk="$(blkid /dev/sd* | grep -i raid | awk '{print $1 " " $4}' | grep UUID | grep "\-01" | awk -F ":" '{print $1}' | head -1)"
[[ ! -d /mnt/dsmroot ]] && mkdir /mnt/dsmroot
[ ! $(mount | grep -i dsmroot | wc -l) -gt 0 ] && sudo mount -t ext4 $dsmrootdisk /mnt/dsmroot
if [ $(mount | grep -i dsmroot | wc -l) -gt 0 ]; then
echo "Succesfully mounted under /mnt/dsmroot"
else
echo "Failed to mount"
return
fi
echo "Checking if patch version exists"
if [ -d /mnt/dsmroot/.syno/patch ]; then
echo "Patch directory exists"
sudo cp /mnt/dsmroot/.syno/patch/VERSION /tmp/VERSION
sudo chmod 666 /tmp/VERSION
. /tmp/VERSION
echo "DSM Root holds a patch version $productversion-$base-$nano "
else
echo "No DSM patch directory exists"
return
fi
}
function mountdatadisk() {
echo "Assembling MD ..."
sudo mdadm -Asf
for mdarray in "$(ls /dev/md* | awk -F "\/" '{print $3}')"; do
echo "Mounting $mdarray"
echo "Getting md devices for array $mdarray"
# Keep for LVM root disks recovery in future release
if [ "$(fstype /dev/${mdarray})" == "LVM2_member" ]; then
echo "Found LVM array, downloading LVM"
tce-load -iw lvm2
sudo vgchange -a y
for volume in $(sudo lvs | grep -i vol | awk '{print $2"-"$1}'); do
if [ "$(fstype /dev/mapper/$volume)" == "btrfs" ]; then
echo "BTRFS Mounting is not supported in tinycore"
return
fi
mkdir /mnt/$volume
sudo mount /dev/mapper/$volume
done
else
echo "Mounting $mdarray "
sudo mkdir /mnt/$mdarray
sudo mount /dev/$mdarray /mnt/$mdarray
fi
done
}
function patchdtc() {
checkmachine
loaderdisk=$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)
localdisks=$(lsblk | grep -i disk | grep -i sd | awk '{print $1}' | grep -v $loaderdisk)
localnvme=$(lsblk | grep -i nvme | awk '{print $1}')
usbpid=$(cat user_config.json | jq '.extra_cmdline .pid' | sed -e 's/"//g' | sed -e 's/0x//g')
usbvid=$(cat user_config.json | jq '.extra_cmdline .vid' | sed -e 's/"//g' | sed -e 's/0x//g')
loaderusb=$(lsusb | grep "${usbvid}:${usbpid}" | awk '{print $2 "-" $4 }' | sed -e 's/://g' | sed -s 's/00//g')
if [ "${TARGET_PLATFORM}" = "v1000" ]; then
dtbfile="ds1621p"
elif [ "${TARGET_PLATFORM}" = "geminilake" ]; then
dtbfile="ds920p"
else
echo "${TARGET_PLATFORM} does not require model.dtc patching "
return
fi
if [ ! -d /lib64 ]; then
[ ! -h /lib64 ] && sudo ln -s /lib /lib64
fi
echo "Downloading dtc binary"
curl --location --progress-bar "$dtcbin" -O
chmod 700 dtc
if [ -f /home/tc/custom-module/${dtbfile}.dts ] && [ ! -f /home/tc/custom-module/${dtbfile}.dtb ]; then
echo "Found locally cached dts file ${dtbfile}.dts and dtb file does not exist in cache, converting dts to dtb"
./dtc -q -I dts -O dtb /home/tc/custom-module/${dtbfile}.dts >/home/tc/custom-module/${dtbfile}.dtb
fi
if [ -f /home/tc/custom-module/${dtbfile}.dtb ]; then
echo "Fould locally cached dtb file"
read -p "Should i use that file ? [Yy/Nn]" answer
if [ -n "$answer" ] && [ "$answer" = "Y" ] || [ "$answer" = "y" ]; then
echo "OK copying over the cached dtb file"
dtbextfile="$(find /home/tc/redpill-load/custom -name model_${dtbfile}.dtb)"
if [ ! -z ${dtbextfile} ] && [ -f ${dtbextfile} ]; then
echo -n "Copying patched dtb file ${dtbfile}.dtb to ${dtbextfile} -> "
sudo cp /home/tc/custom-module/${dtbfile}.dtb ${dtbextfile}
if [ $(sha256sum /home/tc/custom-module/${dtbfile}.dtb | awk '{print $1}') = $(sha256sum ${dtbextfile} | awk '{print $1}') ]; then
echo -e "OK ! File copied and verified !"
return
else
echo -e "ERROR !\nFile has not been copied succesfully, you will need to copy it yourself"
return
fi
else
[ -z ${dtbextfile} ] && echo "dtb extension is not loaded and its required for DSM to find disks on ${SYNOMODEL}"
echo "Copy of the DTB file ${dtbfile}.dtb to ${dtbextfile} was not succesfull."
echo "Please remember to replace the dtb extension model file ..."
echo "execute manually : cp ${dtbfile}.dtb ${dtbextfile} and re-run"
exit 99
fi
else
echo "OK lets continue patching"
fi
else
echo "No cached dtb file found in /home/tc/custom-module/${dtbfile}.dtb"
fi
if [ ! -f ${dtbfile}.dts ]; then
echo "dts file for ${dtbfile} not found, trying to download"
curl --location --progress-bar -O "${dtsfiles}/${dtbfile}.dts"
fi
echo "Found $(echo $localdisks | wc -w) disks and $(echo $localnvme | wc -w) nvme"
let diskslot=1
echo "Collecting disk paths"
for disk in $localdisks; do
diskpath=$(udevadm info --query path --name $disk | awk -F "\/" '{print $4 ":" $5 }' | awk -F ":" '{print $2 ":" $3 "," $6}' | sed 's/,*$//')
if [ "$HYPERVISOR" == "VMware" ]; then
diskport=$(udevadm info --query path --name $disk | sed -n '/target/{s/.*target[1-9]//;p;}' | awk -F: '{print $1}')
else
diskport=$(udevadm info --query path --name $disk | sed -n '/target/{s/.*target//;p;}' | awk -F: '{print $1}')
fi
echo "Found local disk $disk with path $diskpath, adding into internal_slot $diskslot with portnumber $diskport"
if [ "${dtbfile}" == "ds920p" ]; then
sed -i "/internal_slot\@${diskslot} {/!b;n;n;n;n;n;n;n;cpcie_root = \"$diskpath\";" ${dtbfile}.dts
sed -i "/internal_slot\@${diskslot} {/!b;n;n;n;n;n;n;n;n;cata_port = <0x$diskport>;" ${dtbfile}.dts
let diskslot=$diskslot+1
else
sed -i "/internal_slot\@${diskslot} {/!b;n;n;n;n;n;cpcie_root = \"$diskpath\";" ${dtbfile}.dts
sed -i "/internal_slot\@${diskslot} {/!b;n;n;n;n;n;n;cata_port = <0x$diskport>;" ${dtbfile}.dts
let diskslot=$diskslot+1
fi
done
if [ $(echo $localnvme | wc -w) -gt 0 ]; then
let nvmeslot=1
echo "Collecting nvme paths"
for nvme in $localnvme; do
nvmepath=$(udevadm info --query path --name $nvme | awk -F "\/" '{print $4 ":" $5 }' | awk -F ":" '{print $2 ":" $3 "," $6}' | sed 's/,*$//')
echo "Found local nvme $nvme with path $nvmepath, adding into m2_card $nvmeslot"
if [ "${dtbfile}" == "ds920p" ]; then
sed -i "/nvme_slot\@${nvmeslot} {/!b;n;cpcie_root = \"$nvmepath\";" ${dtbfile}.dts
let diskslot=$diskslot+1
else
sed -i "/m2_card\@${nvmeslot} {/!b;n;n;n;cpcie_root = \"$nvmepath\";" ${dtbfile}.dts
let nvmeslot=$diskslot+1
fi
done
else
echo "NO NVME disks found, returning"
fi
if
[ ! -z $loaderusb ] && [ -n $loaderusb ]
then
echo "Patching USB to include your loader. Loader found in ${loaderusb} port"
sed -i "/usb_slot\@1 {/!b;n;n;n;n;n;n;n;cusb_port = \"${loaderusb}\";" ${dtbfile}.dts
else
echo "Your loader is not in USB, i will not try to patch dtb for USB"
fi
echo "Converting dts file : ${dtbfile}.dts to dtb file : >${dtbfile}.dtb "
./dtc -q -I dts -O dtb ${dtbfile}.dts >${dtbfile}.dtb
dtbextfile="$(find /home/tc/redpill-load/custom -name model_${dtbfile}.dtb)"
if [ ! -z ${dtbextfile} ] && [ -f ${dtbextfile} ]; then
echo -n "Copying patched dtb file ${dtbfile}.dtb to ${dtbextfile} -> "
sudo cp ${dtbfile}.dtb ${dtbextfile}
if [ $(sha256sum ${dtbfile}.dtb | awk '{print $1}') = $(sha256sum ${dtbextfile} | awk '{print $1}') ]; then
echo -e "OK ! File copied and verified !"
else
echo -e "ERROR !\nFile has not been copied succesfully, you will need to copy it yourself"
fi
else
[ -z ${dtbextfile} ] && echo "dtb extension is not loaded and its required for DSM to find disks on ${SYNOMODEL}"
echo "Copy of the DTB file ${dtbfile}.dtb to ${dtbextfile} was not succesfull."
echo "Please remember to replace the dtb extension model file ..."
echo "execute manually : cp ${dtbfile}.dtb ${dtbextfile} and re-run"
exit 99
fi
}
function mountshare() {
echo "smb user of the share, leave empty when you do not want to use one"
read -r user
echo "smb password of the share, leave empty when you do not want to use one"
read -r password
if [ -n "$user" ] && [ -z "$password" ]; then
echo "u used a username, so we need a password too"
echo "smb password of the share"
read -r password
fi
echo "smb host ip or hostname"
read -r server
echo "smb shared folder. Start always with /"
read -r share
echo "local mount folder. Use foldername for the mount. This folder is created in /home/tc (default:/home/tc/mount)"
read -r mountpoint
if [ -z "$mountpoint" ]; then
echo "use /home/tc/mount folder, nothing was entered to use so we use the default folder"
mountpoint="/home/tc/mount"
if [ ! -d "$mountpoint" ]; then
sudo mkdir -p "$mountpoint"
fi
else
sudo mkdir -p "$mountpoint"
fi
if [ -n "$user" ] && [ -n "$password" ]; then
sudo mount.cifs "//$server$share" "$mountpoint" -o user="$user",pass="$password"
else
echo "No user/password given, mount without. Press enter"
sudo mount.cifs "//$server$share" "$mountpoint"
fi
}
function checkmachine() {
if grep -q ^flags.*\ hypervisor\ /proc/cpuinfo; then
MACHINE="VIRTUAL"
HYPERVISOR=$(dmesg | grep -i "Hypervisor detected" | awk '{print $5}')
echo "Machine is $MACHINE Hypervisor=$HYPERVISOR"
fi
}
function backup() {
loaderdisk=$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)
homesize=$(du -sh /home/tc | awk '{print $1}')
echo "Please make sure you are using the latest 1GB img before using backup option"
echo "Current /home/tc size is $homesize , try to keep it less than 1GB as it might not fit into your image"
echo "Should i update the $loaderdisk with your current files [Yy/Nn]"
read answer
if [ -n "$answer" ] && [ "$answer" = "Y" ] || [ "$answer" = "y" ]; then
echo -n "Backing up home files to $loaderdisk : "
if filetool.sh -b ${loaderdisk}3; then
echo ""
else
echo "Error: Couldn't backup files"
fi
else
echo "OK, keeping last status"
fi
}
function satamap() {
# This function will attempt to identify all SATA controllers and create sataportmap and diskidxmap.
# Since we cannot know how many ports are on the controllers, we ask the user for the desired number
# of disk ports to be mapped into DSM.
#
# In the case of SATABOOT: While TinyCore suppresses the /dev/sd device servicing synoboot, the
# controller still takes up a sataportmap entry. ThorGroup advised not to map the controller ports
# beyond the MaxDisks limit but there does not appear to be any harm in doing so - unless additional
# devices are connected along with SATABOOT. This will create a gap/empty first slot.
#
# By mapping the SATABOOT controller ports beyond MaxDisks, we force standardization of user data
# disks onto a secondary controller, and it's clear what the SATABOOT controller and device are
# being used for. Therefore, we must positively identify it, map it out, and ignore any other drives
# connected to it.
#
# We need something similar to disable the bogus SATA controller in the KVM q35 hardware model.
#
# This code was written with the intention of reusing the detection strategy for device tree
# creation, and the two functions could easily be integrated if desired.
checkmachine
let diskidxmapidx=0
sataportmap=""
diskidxmap=""
maxdisks=$(jq -r ".synoinfo.maxdisks" user_config.json)
# if we cannot find usb disk, the boot disk must be intended for SATABOOT
if [ $(ls -la /sys/block/sd* | fgrep "/usb" | wc -l) -eq 0 ]; then
loaderdisk=$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)
sbpci=$(ls -la /sys/block/$loaderdisk | awk -F"/ata" '{print $1}' | awk -F"/" '{print $NF}' | cut --complement -f1 -d:)
fi
# get all SATA controllers PCI class 106
# 100 = SCSI, 104 = RAIDHBA, 107 = SAS - none of these appear to honor sataportmap/diskidxmap
pcis=$(lspci -d ::106 | awk '{print $1}')
# loop through controllers in correct order
for pci in $pcis; do
# get attached block devices (exclude CD-ROMs)
ports=$(ls -la /sys/class/ata_device | fgrep "$pci" | wc -l)
drives=$(ls -la /sys/block | fgrep "$pci" | grep -v "sr.$" | wc -l)
echo -e "\nFound \"$(lspci -s $pci | sed "s/SATA controller: //")\""
echo -n "Detected $ports ports/$drives drives. "
if [ "$pci" = "$sbpci" ]; then
# sataboot controller? if so it has to be mapped as first controller (we think)
echo "SATABOOT detected. Mapping loader dev after maxdisks"
[ ${drives} -gt 1 ] && echo "WARNING: Additional devices are attached. These will be inaccessible!"
sataportmap=$sataportmap"1"
diskidxmap=$diskidxmap$(printf "%02X" $maxdisks)
else
if [ "$pci" = "00:1f.2" ] && [ "$HYPERVISOR" = "KVM" ]; then
# KVM q35 bogus controller?
echo "Reserving and disabling KVM q35 bogus controller"
sataportmap=$sataportmap"1"
diskidxmap=$diskidxmap$(printf "%02X" $maxdisks)
else
# handle VMware insane port count
if [ "$HYPERVISOR" = "VMware" ] && [ $ports -eq 30 ]; then
echo "Setting 8 VMware virtual ports for compatibility with typical systems"
ports=8
fi
echo -n "Override # of ports or ENTER to accept <$ports> "
read newports
if [ ! -z $newports ]; then
ports=$newports
if ! [ "$ports" -eq "$ports" ] 2>/dev/null; then
echo "Non-numeric, overridden to 0"
ports=0
fi
fi
if [ $ports -gt 9 ]; then
echo "WARNING: specifying more than 9 ports per controller is unsupported and may affect stability"
let ports=$ports+48
portchar=$(printf \\$(printf "%o" $ports))
else
portchar=$ports
fi
sataportmap=$sataportmap$portchar
diskidxmap=$diskidxmap$(printf "%02x" $diskidxmapidx)
let diskidxmapidx=$diskidxmapidx+$ports
# warn if exceeding maxdisks
[ $diskidxmapidx -gt $maxdisks ] && echo "WARNING: the total number of mapped ports exceeds maxdisks"
fi
fi
done
# handle no assigned SATA ports affecting SCSI mapping problem
if [ $diskidxmapidx -eq 0 ]; then
echo "No SATA ports mapped. Setup for compatibility with SCSI/SAS controller mapping."
[ -z $sataportmap ] && sataportmap="1"
diskidxmap=$diskidxmap"00"
fi
echo -e "\nRecommended settings:"
echo "SataPortMap=$sataportmap"
echo "DiskIdxMap=$diskidxmap"
echo
echo -n "Should i update the user_config.json with these values ? [Yy/Nn] "
read answer
if [ -n "$answer" ] && [ "$answer" = "Y" ] || [ "$answer" = "y" ]; then
json="$(jq --arg var "$sataportmap" '.extra_cmdline.SataPortMap = $var' user_config.json)" && echo -E "${json}" | jq . >user_config.json
json="$(jq --arg var "$diskidxmap" '.extra_cmdline.DiskIdxMap = $var' user_config.json)" && echo -E "${json}" | jq . >user_config.json
echo "Done."
else
echo "OK remember to update manually by editing user_config.json file"
fi
}
function usbidentify() {
checkmachine
if [ "$MACHINE" = "VIRTUAL" ] && [ "$HYPERVISOR" = "VMware" ]; then
echo "Running on VMware, no need to set USB VID and PID, you should SATA shim instead"
exit 0
fi
if [ "$MACHINE" = "VIRTUAL" ] && [ "$HYPERVISOR" = "QEMU" ]; then
echo "Running on QEMU, If you are using USB shim, VID 0x46f4 and PID 0x0001 should work for you"
vendorid="0x46f4"
productid="0x0001"
echo "Vendor ID : $vendorid Product ID : $productid"
echo "Should i update the user_config.json with these values ? [Yy/Nn]"
read answer
if [ -n "$answer" ] && [ "$answer" = "Y" ] || [ "$answer" = "y" ]; then
sed -i "/\"pid\": \"/c\ \"pid\": \"$productid\"," user_config.json
sed -i "/\"vid\": \"/c\ \"vid\": \"$vendorid\"," user_config.json
else
echo "OK remember to update manually by editing user_config.json file"
fi
exit 0
fi
loaderdisk=$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)
lsusb -v 2>&1 | grep -B 33 -A 1 SCSI >/tmp/lsusb.out
usblist=$(grep -B 33 -A 1 SCSI /tmp/lsusb.out)
vendorid=$(grep -B 33 -A 1 SCSI /tmp/lsusb.out | grep -i idVendor | awk '{print $2}')
productid=$(grep -B 33 -A 1 SCSI /tmp/lsusb.out | grep -i idProduct | awk '{print $2}')
if [ $(echo $vendorid | wc -w) -gt 1 ]; then
echo "Found more than one USB disk devices, please select which one is your loader on"
usbvendor=$(for item in $vendorid; do grep $item /tmp/lsusb.out | awk '{print $3}'; done)
select usbdev in $usbvendor; do
vendorid=$(grep -B 10 -A 10 $usbdev /tmp/lsusb.out | grep idVendor | grep $usbdev | awk '{print $2}')
productid=$(grep -B 10 -A 10 $usbdev /tmp/lsusb.out | grep -A 1 idVendor | grep idProduct | awk '{print $2}')
echo "Selected Device : $usbdev , with VendorID: $vendorid and ProductID: $productid"
break
done
else
usbdevice="$(grep iManufacturer /tmp/lsusb.out | awk '{print $3}') $(grep iProduct /tmp/lsusb.out | awk '{print $3}') SerialNumber: $(grep iSerial /tmp/lsusb.out | awk '{print $3}')"
fi
if [ -n "$usbdevice" ] && [ -n "$vendorid" ] && [ -n "$productid" ]; then
echo "Found $usbdevice"
echo "Vendor ID : $vendorid Product ID : $productid"
echo "Should i update the user_config.json with these values ? [Yy/Nn]"
read answer
if [ -n "$answer" ] && [ "$answer" = "Y" ] || [ "$answer" = "y" ]; then
# sed -i "/\"pid\": \"/c\ \"pid\": \"$productid\"," user_config.json
json="$(jq --arg var "$productid" '.extra_cmdline.pid = $var' user_config.json)" && echo -E "${json}" | jq . >user_config.json
# sed -i "/\"vid\": \"/c\ \"vid\": \"$vendorid\"," user_config.json
json="$(jq --arg var "$vendorid" '.extra_cmdline.vid = $var' user_config.json)" && echo -E "${json}" | jq . >user_config.json
else
echo "OK remember to update manually by editing user_config.json file"
fi
else
echo "Sorry, no usb disk could be identified"
rm /tmp/lsusb.out
fi
}
function serialgen() {
shift 1
[ "$2" == "realmac" ] && let keepmac=1 || let keepmac=0
if [ "$1" = "DS3615xs" ] || [ "$1" = "DS3617xs" ] || [ "$1" = "DS916+" ] || [ "$1" = "DS918+" ] || [ "$1" = "DS920+" ] || [ "$1" = "DS3622xs+" ] || [ "$1" = "FS6400" ] || [ "$1" = "DVA3219" ] || [ "$1" = "DVA3221" ] || [ "$1" = "DS1621+" ]; then
serial="$(generateSerial $1)"
mac="$(generateMacAddress $1)"
realmac=$(ifconfig eth0 | head -1 | awk '{print $NF}')
echo "Serial Number for Model : $serial"
echo "Mac Address for Model $1 : $mac "
[ $keepmac -eq 1 ] && echo "Real Mac Address : $realmac"
[ $keepmac -eq 1 ] && echo "Notice : realmac option is requested, real mac will be used"
echo "Should i update the user_config.json with these values ? [Yy/Nn]"
read answer
if [ -n "$answer" ] && [ "$answer" = "Y" ] || [ "$answer" = "y" ]; then
# sed -i "/\"sn\": \"/c\ \"sn\": \"$serial\"," user_config.json
json="$(jq --arg var "$serial" '.extra_cmdline.sn = $var' user_config.json)" && echo -E "${json}" | jq . >user_config.json
if [ $keepmac -eq 1 ]; then
macaddress=$(echo $realmac | sed -s 's/://g')
else
macaddress=$(echo $mac | sed -s 's/://g')
fi
json="$(jq --arg var "$macaddress" '.extra_cmdline.mac1 = $var' user_config.json)" && echo -E "${json}" | jq . >user_config.json
# sed -i "/\"mac1\": \"/c\ \"mac1\": \"$macaddress\"," user_config.json
else
echo "OK remember to update manually by editing user_config.json file"
fi
else
echo "Error : $1 is not an available model for serial number generation. "
echo "Available Models : DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ FS6400 DVA3219 DVA3221 DS1621+"
fi
}
function beginArray() {
case $1 in
DS3615xs)
permanent="LWN"
serialstart="1130 1230 1330 1430"
;;
DS3617xs)
permanent="ODN"
serialstart="1130 1230 1330 1430"
;;
DS916+)
permanent="NZN"
serialstart="1130 1230 1330 1430"
;;
DS918+)
permanent="PDN"
serialstart="1780 1790 1860 1980"
;;
DS920+)
permanent="SBR"
serialstart="2030 2040 20C0 2150"
;;
DS3622xs+)
permanent="SQR"
serialstart="2030 2040 20C0 2150"
;;
DS1621+)
permanent="S7R"
serialstart="2080"
;;
FS6400)
permanent="PSN"
serialstart="1960"
;;
DVA3219)
permanent="RFR"
serialstart="1930 1940"
;;
DVA3221)
permanent="SJR"
serialstart="2030 2040 20C0 2150"
;;
esac
}
function random() {
printf "%06d" $(($RANDOM % 30000 + 1))
}
function randomhex() {
val=$(($RANDOM % 255 + 1))
echo "obase=16; $val" | bc
}
function generateRandomLetter() {
for i in a b c d e f g h j k l m n p q r s t v w x y z; do
echo $i
done | sort -R | tail -1
}
function generateRandomValue() {
for i in 0 1 2 3 4 5 6 7 8 9 a b c d e f g h j k l m n p q r s t v w x y z; do
echo $i
done | sort -R | tail -1
}
function toupper() {
echo $1 | tr '[:lower:]' '[:upper:]'
}
function generateMacAddress() {
#toupper "Mac Address: 00:11:32:$(randomhex):$(randomhex):$(randomhex)"
printf '00:11:32:%02X:%02X:%02X' $((RANDOM % 256)) $((RANDOM % 256)) $((RANDOM % 256))
}
function generateSerial() {
beginArray $1
case $1 in
DS3615xs)
serialnum="$(echo "$serialstart" | tr ' ' '\n' | sort -R | tail -1)$permanent"$(random)
;;
DS3617xs)
serialnum="$(echo "$serialstart" | tr ' ' '\n' | sort -R | tail -1)$permanent"$(random)
;;
DS916+)
serialnum="$(echo "$serialstart" | tr ' ' '\n' | sort -R | tail -1)$permanent"$(random)
;;
DS918+)
serialnum="$(echo "$serialstart" | tr ' ' '\n' | sort -R | tail -1)$permanent"$(random)
;;
FS6400)
serialnum="$(echo "$serialstart" | tr ' ' '\n' | sort -R | tail -1)$permanent"$(random)
;;
DS920+)
serialnum=$(toupper "$(echo "$serialstart" | tr ' ' '\n' | sort -R | tail -1)$permanent"$(generateRandomLetter)$(generateRandomValue)$(generateRandomValue)$(generateRandomValue)$(generateRandomValue)$(generateRandomLetter))
;;
DS3622xs+)
serialnum=$(toupper "$(echo "$serialstart" | tr ' ' '\n' | sort -R | tail -1)$permanent"$(generateRandomLetter)$(generateRandomValue)$(generateRandomValue)$(generateRandomValue)$(generateRandomValue)$(generateRandomLetter))
;;
DS1621+)
serialnum=$(toupper "$(echo "$serialstart" | tr ' ' '\n' | sort -R | tail -1)$permanent"$(generateRandomLetter)$(generateRandomValue)$(generateRandomValue)$(generateRandomValue)$(generateRandomValue)$(generateRandomLetter))
;;
DVA3219)
serialnum=$(toupper "$(echo "$serialstart" | tr ' ' '\n' | sort -R | tail -1)$permanent"$(generateRandomLetter)$(generateRandomValue)$(generateRandomValue)$(generateRandomValue)$(generateRandomValue)$(generateRandomLetter))
;;
DVA3221)
serialnum=$(toupper "$(echo "$serialstart" | tr ' ' '\n' | sort -R | tail -1)$permanent"$(generateRandomLetter)$(generateRandomValue)$(generateRandomValue)$(generateRandomValue)$(generateRandomValue)$(generateRandomLetter))
;;
esac
echo $serialnum
}
function prepareforcompile() {
echo "Downloading required build software "
tce-load -wi git compiletc coreutils bc perl5 openssl-1.1.1-dev
if [ ! -d /lib64 ]; then
[ ! -h /lib64 ] && sudo ln -s /lib /lib64
fi
if [ ! -f /lib64/libbz2.so.1 ]; then
[ ! -h /lib64/libbz2.so.1 ] && sudo ln -s /usr/local/lib/libbz2.so.1.0.8 /lib64/libbz2.so.1
fi
}
function gettoolchain() {
if [ -d /usr/local/x86_64-pc-linux-gnu/ ]; then
echo "Toolchain already cached"
return
fi
cd /home/tc
if [ -f dsm-toolchain.7.0.txz ]; then
echo "File already cached"
else
echo "Downloading and caching toolchain"
curl --progress-bar --location "${TOOLKIT_URL}" --output dsm-toolchain.7.0.txz
fi
echo -n "Checking file -> "
checkfilechecksum dsm-toolchain.7.0.txz ${TOOLKIT_SHA}
echo "OK, file matches sha256sum, extracting"
cd / && sudo tar -xf /home/tc/dsm-toolchain.7.0.txz usr/local/x86_64-pc-linux-gnu/x86_64-pc-linux-gnu/sys-root/usr/lib/modules/DSM-7.0/build
if [ $? = 0 ]; then
return
else
echo "Failed to extract toolchain"
fi
}
function getPlatforms() {
platform_versions=$(jq -s '.[0].build_configs=(.[1].build_configs + .[0].build_configs | unique_by(.id)) | .[0]' custom_config_jun.json custom_config.json | jq -r '.build_configs[].id')
echo "$platform_versions"
}
function selectPlatform() {
platform_selected=$(jq -s '.[0].build_configs=(.[1].build_configs + .[0].build_configs | unique_by(.id)) | .[0]' custom_config_jun.json custom_config.json | jq ".build_configs[] | select(.id==\"${1}\")")
}
function getValueByJsonPath() {
local JSONPATH=${1}
local CONFIG=${2}
jq -c -r "${JSONPATH}" <<<${CONFIG}
}
function readConfig() {
if [ ! -e custom_config.json ]; then
cat global_config.json
else
jq -s '.[0].build_configs=(.[1].build_configs + .[0].build_configs | unique_by(.id)) | .[0]' custom_config_jun.json custom_config.json
fi
}
function getsynokernel() {
if [ -d /home/tc/linux-kernel ]; then
if [ -f /home/tc/linux-kernel/synoconfigs/${TARGET_PLATFORM} ]; then
echo "Synokernel already cached"
return
else
echo "Synokernel is cached but does not match the required sources"
rm -rf /home/tc/linux-kernel
rm -rf synokernel.txz
fi
fi
cd /home/tc
if [ -f synokernel.txz ]; then
echo -n "File already cached, checking file -> "
checkfilechecksum synokernel.txz ${SYNOKERNEL_SHA}
echo "OK, file matches sha256sum, extracting"
tar xf /home/tc/synokernel.txz
mv $(tar --exclude="*/*/*" -tf synokernel.txz | head -1) linux-kernel
rm -rf synokernel.txz
else
echo "Downloading and caching synokernel"
cd /home/tc && curl --progress-bar --location ${SYNOKERNEL_URL} --output synokernel.txz
checkfilechecksum synokernel.txz ${SYNOKERNEL_SHA}
echo "OK, file matches sha256sum, extracting"
echo "Extracting synokernel"
tar xf /home/tc/synokernel.txz
mv $(tar --exclude="*/*/*" -tf synokernel.txz | head -1) linux-kernel
rm -rf synokernel.txz
fi
}
function cleanloader() {
echo "Clearing local redpill files"
sudo rm -rf /home/tc/redpill*
sudo rm -rf /home/tc/*tgz
sudo rm -rf /home/tc/latestrploader.sh
}
function compileredpill() {
cd /home/tc
export DSM_VERSION=${TARGET_VERSION}
export REDPILL_LOAD_SRC=/home/tc/redpill-load
export REDPILL_LKM_SRC=/home/tc/redpill-lkm
export LOCAL_RP_LOAD_USE=false
export ARCH=x86_64
export LOCAL_RP_LKM_USE=false
echo "Compiling redpill with $COMPILE_METHOD"
if [ "$COMPILE_METHOD" = "toolkit_dev" ]; then
export LINUX_SRC=/usr/local/x86_64-pc-linux-gnu/x86_64-pc-linux-gnu/sys-root/usr/lib/modules/DSM-7.0/build
else
export LINUX_SRC=/home/tc/linux-kernel
fi
cd redpill-lkm && make ${REDPILL_LKM_MAKE_TARGET}
strip --strip-debug /home/tc/redpill-lkm/redpill.ko
modinfo /home/tc/redpill-lkm/redpill.ko
REDPILL_MOD_NAME="redpill-linux-v$(modinfo redpill.ko | grep vermagic | awk '{print $2}').ko"
cp /home/tc/redpill-lkm/redpill.ko /home/tc/redpill-load/ext/rp-lkm/${REDPILL_MOD_NAME}
}
function checkfilechecksum() {
local FILE="${1}"
local EXPECTED_SHA256="${2}"
local SHA256_RESULT=$(sha256sum ${FILE})
if [ "${SHA256_RESULT%% *}" != "${EXPECTED_SHA256}" ]; then
echo "The ${FILE} is corrupted, expected sha256 checksum ${EXPECTED_SHA256}, got ${SHA256_RESULT%% *}"
#rm -f "${FILE}"
#echo "Deleted corrupted file ${FILE}. Please re-run your action!"
echo "Please delete the file ${FILE} manualy and re-run your command!"
exit 99
fi
}
function tinyentry() {
cat <<EOF
menuentry 'Tiny Core Image Build' {
savedefault
set root=(hd0,msdos3)
echo Loading Linux...
linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791
echo Loading initramfs...
initrd /corepure64.gz
echo Booting TinyCore for loader creation
}
EOF
}
function showsyntax() {
cat <<EOF
$(basename ${0})
Version : $rploaderver
----------------------------------------------------------------------------------------
Usage: ${0} <action> <platform version> <static or compile module> [extension manager arguments]
Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, patchdtc,
satamap, backup, backuploader, restoreloader, restoresession, mountdsmroot, postupdate,
mountshare, version, monitor, help
----------------------------------------------------------------------------------------
Available platform versions:
----------------------------------------------------------------------------------------
$(getPlatforms)
----------------------------------------------------------------------------------------
Check custom_config.json for platform settings.
EOF
}
function showhelp() {
cat <<EOF
$(basename ${0})
Version : $rploaderver
----------------------------------------------------------------------------------------
Usage: ${0} <action> <platform version> <static or compile module> [extension manager arguments]
Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, patchdtc,
satamap, backup, backuploader, restoreloader, restoresession, mountdsmroot, postupdate,
mountshare, version, monitor, help
- build <platform> <option> :
Build the 💊 RedPill LKM and update the loader image for the specified platform version and update
current loader.
Valid Options: static/compile/manual
- ext <platform> <option> <URL>
Manage extensions using redpill extension manager.
Valid Options: add/force_add/info/remove/update/cleanup/auto . Options after platform
Example:
rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json
or for auto detect use
rploader.sh ext apollolake-7.0.1-42218 auto
- download <platform> :
Download redpill sources only
- clean :
Removes all cached and downloaded files and starts over clean
- update :
Checks github repo for latest version of rploader, and prompts you download and overwrite
- listmods <platform>:
Tries to figure out any required extensions. This usually are device modules
- serialgen <synomodel> <option> :
Generates a serial number and mac address for the following platforms
DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ FS6400 DVA3219 DVA3221 DS1621+
Valid Options : realmac , keeps the real mac of interface eth0
- identifyusb :
Tries to identify your loader usb stick VID:PID and updates the user_config.json file
- patchdtc :
Tries to identify and patch your dtc model for your disk and nvme devices. If you want to have
your manually edited dts file used convert it to dtb and place it under /home/tc/custom-modules
- satamap :
Tries to identify your SataPortMap and DiskIdxMap values and updates the user_config.json file
- backup :
Backup and make changes /home/tc changed permanent to your loader disk. Next time you boot,
your /home will be restored to the current state.
- backuploader :
Backup current loader partitions to your TCRP partition
- restoreloader :
Restore current loader partitions from your TCRP partition
- restoresession :
Restore last user session files. (extensions and user_config.json)
- mountdsmroot :
Mount DSM root for manual intervention on DSM root partition
- postupdate :
Runs a postupdate process to recreate your rd.gz, zImage and custom.gz for junior to match root
- mountshare :
Mounts a remote CIFS working directory
- version <option>:
Prints rploader version and if the history option is passed then the version history is listed.
Valid Options : history, shows rploader release history.
- monitor
Prints system statistics related to TCRP loader
- help: Show this page
Version : $rploaderver
----------------------------------------------------------------------------------------
Available platform versions:
----------------------------------------------------------------------------------------
$(getPlatforms)
----------------------------------------------------------------------------------------
Check custom_config.json for platform settings.
EOF
}
function checkinternet() {
echo -n "Checking Internet Access -> "
nslookup github.com 2>&1 >/dev/null
if [ $? -eq 0 ]; then
echo "OK"
else
echo "Error: No internet found, or github is not accessible"
exit 99
fi
}
function gitdownload() {
cd /home/tc
if [ -d redpill-lkm ]; then
echo "Redpill sources already downloaded, pulling latest"
cd redpill-lkm
git pull
cd /home/tc
else
git clone -b $LKM_BRANCH "$LKM_SOURCE_URL"
fi
if [ -d redpill-load ]; then
echo "Loader sources already downloaded, pulling latest"
cd redpill-load
git pull
cd /home/tc
else
git clone -b $LD_BRANCH "$LD_SOURCE_URL"
fi
}
function getstaticmodule() {
cd /home/tc
if [ -d /home/tc/custom-module ] && [ -f /home/tc/custom-module/redpill.ko ]; then
echo "Found custom redpill module, do you want to use this instead ? [yY/nN] : "
read answer
if [ "$answer" == "y" ] || [ "$answer" == "Y" ]; then
REDPILL_MOD_NAME="redpill-linux-v$(modinfo /home/tc/custom-module/redpill.ko | grep vermagic | awk '{print $2}').ko"
cp /home/tc/custom-module/redpill.ko /home/tc/redpill-load/ext/rp-lkm/${REDPILL_MOD_NAME}
strip --strip-debug /home/tc/redpill-load/ext/rp-lkm/${REDPILL_MOD_NAME}
return
fi
fi
echo "Removing any old redpill.ko modules"
[ -f /home/tc/redpill.ko ] && rm -f /home/tc/redpill.ko
extension=$(curl -s --location "$redpillextension")
if [ "${TARGET_PLATFORM}" = "apollolake" ]; then
SYNOMODEL="ds918p_$TARGET_REVISION"
elif [ "${TARGET_PLATFORM}" = "bromolow" ]; then
SYNOMODEL="ds3615xs_$TARGET_REVISION"
elif [ "${TARGET_PLATFORM}" = "broadwell" ]; then
SYNOMODEL="ds3617xs_$TARGET_REVISION"
elif [ "${TARGET_PLATFORM}" = "broadwellnk" ]; then
SYNOMODEL="ds3622xsp_$TARGET_REVISION"
elif [ "${TARGET_PLATFORM}" = "v1000" ]; then
SYNOMODEL="ds1621p_$TARGET_REVISION"
elif [ "${TARGET_PLATFORM}" = "denverton" ]; then
SYNOMODEL="dva3221_$TARGET_REVISION"
elif [ "${TARGET_PLATFORM}" = "geminilake" ]; then
SYNOMODEL="ds920p_$TARGET_REVISION"
fi
echo "Looking for redpill for : $SYNOMODEL "
#release=`echo $extension | jq -r '.releases .${SYNOMODEL}_{$TARGET_REVISION}'`
release=$(echo $extension | jq -r -e --arg SYNOMODEL $SYNOMODEL '.releases[$SYNOMODEL]')
files=$(curl -s --location "$release" | jq -r '.files[] .url')
for file in $files; do
echo "Getting file $file"
curl -s -O $file
if [ -f redpill*.tgz ]; then
echo "Extracting module"
tar xf redpill*.tgz
rm redpill*.tgz
strip --strip-debug redpill.ko
fi
done
if [ -f redpill.ko ] && [ -n $(strings redpill.ko | grep $SYNOMODEL) ]; then
REDPILL_MOD_NAME="redpill-linux-v$(modinfo redpill.ko | grep vermagic | awk '{print $2}').ko"
mv /home/tc/redpill.ko /home/tc/redpill-load/ext/rp-lkm/${REDPILL_MOD_NAME}
else
echo "Module does not contain platorm information for ${SYNOMODEL}"
exit 99
fi
}
function downloadtools() {
curl -s --progress-bar --location "https://packages.slackonly.com/pub/packages/14.1-x86_64/development/bsdiff/bsdiff-4.3-x86_64-1_slack.txz" --output /home/tc/bsdiff.txz
[ ! -f /home/tc/bsdiff.txz ] && echo "bsdiff binary was not downloaded"
[ -f /home/tc/bsdiff.txz ] && cd / && sudo tar xf /home/tc/bsdiff.txz && rm -rf /home/tc/bsdiff.txz && cd /home/tc
}
function buildloader() {
tcrppart="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)3"
local_cache="/mnt/${tcrppart}/auxfiles"
[ "$1" == "junmod" ] && JUNLOADER="YES"
[ -d $local_cache ] && echo "Found tinycore cache folder, linking to home/tc/custom-module" && [ ! -d /home/tc/custom-module ] && ln -s $local_cache /home/tc/custom-module
cd /home/tc
echo -n "Checking user_config.json : "
if jq -s . user_config.json >/dev/null; then
echo "Done"
else
echo "Error : Problem found in user_config.json"
exit 99
fi
removebundledexts
downloadtools
if [ ! -d /lib64 ]; then
sudo ln -s /lib /lib64
fi
if [ ! -f /lib64/libbz2.so.1 ]; then
sudo ln -s /usr/local/lib/libbz2.so.1.0.8 /lib64/libbz2.so.1
fi
if [ ! -f /home/tc/redpill-load/user_config.json ]; then
ln -s /home/tc/user_config.json /home/tc/redpill-load/user_config.json
fi
cd /home/tc/redpill-load
if [ -d cache ]; then
echo "Cache directory OK "
else
mkdir cache
fi
if [ ${TARGET_REVISION} -gt 42218 ]; then
echo "Found build request for revision greater than 42218"
downloadextractor
processpat
else
if [ -d /home/tc/custom-module ]; then
echo "Want to use firmware files from /home/tc/custom-module/*.pat ? [yY/nN] : "
read answer
if [ "$answer" == "y" ] || [ "$answer" == "Y" ]; then
sudo cp -adp /home/tc/custom-module/*${TARGET_REVISION}*.pat /home/tc/redpill-load/cache/
fi
fi
fi
[ -d /home/tc/redpill-load ] && cd /home/tc/redpill-load
addrequiredexts
if [ "$JUNLOADER" == "YES" ]; then
echo "jun build option has been specified, so JUN MOD loader will be created"
sudo BRP_JUN_MOD=1 BRP_DEBUG=0 BRP_USER_CFG=user_config.json ./build-loader.sh $MODEL $TARGET_VERSION-$TARGET_REVISION loader.img
else
sudo ./build-loader.sh $MODEL $TARGET_VERSION-$TARGET_REVISION loader.img
fi
if [ $? -ne 0 ]; then
echo "FAILED : Loader creation failed check the output for any errors"
exit 99
fi
sudo losetup -fP ./loader.img
loopdev=$(losetup -j loader.img | awk '{print $1}' | sed -e 's/://')
if [ -d part1 ]; then
sudo mount ${loopdev}p1 part1
else
mkdir part1
sudo mount ${loopdev}p1 part1
fi
if [ -d part2 ]; then
sudo mount ${loopdev}p2 part2
else
mkdir part2
sudo mount ${loopdev}p2 part2
fi
loaderdisk=$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)
if [ -d localdiskp1 ]; then
sudo mount /dev/${loaderdisk}1 localdiskp1
echo "Mounting /dev/${loaderdisk}1 to localdiskp1 "
else
mkdir localdiskp1
sudo mount /dev/${loaderdisk}1 localdiskp1
echo "Mounting /dev/${loaderdisk}1 to localdiskp1 "
fi
if [ -d localdiskp2 ]; then
sudo mount /dev/${loaderdisk}2 localdiskp2
echo "Mounting /dev/${loaderdisk}2 to localdiskp2 "
else
mkdir localdiskp2
sudo mount /dev/${loaderdisk}2 localdiskp2
echo /dev/${loaderdisk}2 localdiskp2
fi
if [ $(mount | grep -i part1 | wc -l) -eq 1 ] && [ $(mount | grep -i part2 | wc -l) -eq 1 ] && [ $(mount | grep -i localdiskp1 | wc -l) -eq 1 ] && [ $(mount | grep -i localdiskp2 | wc -l) -eq 1 ]; then
sudo cp -rf part1/* localdiskp1/
sudo cp -rf part2/* localdiskp2/
echo "Creating tinycore entry"
tinyentry | sudo tee --append localdiskp1/boot/grub/grub.cfg
else
echo "ERROR: Failed to mount correctly all required partitions"
fi
echo "Entries in Localdisk bootloader : "
echo "======================================================================="
grep menuentry localdiskp1/boot/grub/grub.cfg
checkmachine
if [ "$MACHINE" = "VIRTUAL" ]; then
echo "Setting default boot entry to SATA"
sudo sed -i "/set default=\"0\"/cset default=\"1\"" localdiskp1/boot/grub/grub.cfg
fi
sudo umount part1
sudo umount part2
sudo umount localdiskp1
sudo umount localdiskp2
sudo losetup -D
echo "Caching files for future use"
[ ! -d ${local_cache} ] && mkdir ${local_cache}
if [ $(df -h /mnt/${tcrppart} | grep mnt | awk '{print $4}' | cut -c 1-3 | sed -e 's/M//g') -le 400 ]; then
echo "No adequate space on TCRP loader partition /mnt/${tcrppart} to cache pat file"
echo "Found $(ls /mnt/${tcrppart}/auxfiles/*pat) file"
echo -n "Do you want me to remove older cached pat files and cache current ? [yY/nN] : "
read answer
if [ "$answer" == "y" ] || [ "$answer" == "Y" ]; then
rm -f /mnt/${tcrppart}/auxfiles/*.pat
patfile=$(ls /home/tc/redpill-load/cache/*${TARGET_REVISION}*.pat | head -1)
echo "Found ${patfile}, copying to cache directory : ${local_cache} "
cp -f ${patfile} ${local_cache}
fi
else
if [ -f "$(ls /home/tc/redpill-load/cache/*${TARGET_REVISION}*.pat | head -1)" ]; then
patfile=$(ls /home/tc/redpill-load/cache/*${TARGET_REVISION}*.pat | head -1)
echo "Found ${patfile}, copying to cache directory : ${local_cache} "
cp -f ${patfile} ${local_cache}
fi
fi
}
function kernelprepare() {
export ARCH=x86_64
cd /home/tc/linux-kernel
cp synoconfigs/${TARGET_PLATFORM} .config
if [ ${TARGET_PLATFORM} = "apollolake" ]; then
echo '+' >.scmversion
fi
if [ ${TARGET_PLATFORM} = "bromolow" ]; then
cat <<EOF >patch-reloc
--- arch/x86/tools/relocs.c
+++ arch/x86/tools/relocs.b
@@ -692,7 +692,7 @@
*
*/
static int per_cpu_shndx = -1;
-Elf_Addr per_cpu_load_addr;
+static Elf_Addr per_cpu_load_addr;
static void percpu_init(void)
{
EOF
if ! patch -R -p0 -s -f --dry-run <patch-reloc; then
patch -p0 <patch-reloc
fi
fi
make oldconfig
make headers_install
make modules_prepare
}
function getlatestrploader() {
echo -n "Checking if a newer version exists on the $build repo -> "
curl -s --location "$rploaderfile" --output latestrploader.sh
curl -s --location "$modalias3" --output modules.alias.3.json.gz
[ -f modules.alias.3.json.gz ] && gunzip -f modules.alias.3.json.gz
curl -s --location "$modalias4" --output modules.alias.4.json.gz
[ -f modules.alias.4.json.gz ] && gunzip -f modules.alias.4.json.gz
CURRENTSHA="$(sha256sum rploader.sh | awk '{print $1}')"
REPOSHA="$(sha256sum latestrploader.sh | awk '{print $1}')"
if [ -f latestrploader.sh ] && [ "${CURRENTSHA}" != "${REPOSHA}" ]; then
echo "Found newversion : $(bash ./latestrploader.sh version now)"
echo "Current version : $(bash ./rploader.sh version now)"
echo -n "There is a newer version of the script on the repo should we use that ? [yY/nN]"
read confirmation
if [ "$confirmation" = "y" ] || [ "$confirmation" = "Y" ]; then
echo "OK, updating, please re-run after updating"
cp -f /home/tc/latestrploader.sh /home/tc/rploader.sh
rm -f /home/tc/latestrploader.sh
loaderdisk=$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)
echo "Updating tinycore loader with latest updates"
#cleanloader
filetool.sh -b ${loaderdisk}3
exit
else
rm -f /home/tc/latestrploader.sh
return
fi
else
echo "Version is current"
rm -f /home/tc/latestrploader.sh
fi
}
function getvars() {
CONFIG=$(readConfig)
selectPlatform $1
GETTIME=$(curl -v --silent https://google.com/ 2>&1 | grep Date | sed -e 's/< Date: //')
INTERNETDATE=$(date +"%d%m%Y" -d "$GETTIME")
LOCALDATE=$(date +"%d%m%Y")
LD_SOURCE_URL="$(echo $platform_selected | jq -r -e '.redpill_load .source_url')"
LD_BRANCH="$(echo $platform_selected | jq -r -e '.redpill_load .branch')"
LKM_SOURCE_URL="$(echo $platform_selected | jq -r -e '.redpill_lkm .source_url')"
LKM_BRANCH="$(echo $platform_selected | jq -r -e '.redpill_lkm .branch')"
#EXTENSIONS="$(echo $platform_selected | jq -r -e '.add_extensions[]')"
EXTENSIONS="$(echo $platform_selected | jq -r -e '.add_extensions[]' | grep json | awk -F: '{print $1}' | sed -s 's/"//g')"
#EXTENSIONS_SOURCE_URL="$(echo $platform_selected | jq '.add_extensions[] .url')"
EXTENSIONS_SOURCE_URL="$(echo $platform_selected | jq '.add_extensions[]' | grep json | awk '{print $2}')"
TOOLKIT_URL="$(echo $platform_selected | jq -r -e '.downloads .toolkit_dev .url')"
TOOLKIT_SHA="$(echo $platform_selected | jq -r -e '.downloads .toolkit_dev .sha256')"
SYNOKERNEL_URL="$(echo $platform_selected | jq -r -e '.downloads .kernel .url')"
SYNOKERNEL_SHA="$(echo $platform_selected | jq -r -e '.downloads .kernel .sha256')"
COMPILE_METHOD="$(echo $platform_selected | jq -r -e '.compile_with')"
TARGET_PLATFORM="$(echo $platform_selected | jq -r -e '.platform_version | split("-")' | jq -r -e .[0])"
TARGET_VERSION="$(echo $platform_selected | jq -r -e '.platform_version | split("-")' | jq -r -e .[1])"
TARGET_REVISION="$(echo $platform_selected | jq -r -e '.platform_version | split("-")' | jq -r -e .[2])"
REDPILL_LKM_MAKE_TARGET="$(echo $platform_selected | jq -r -e '.redpill_lkm_make_target')"
tcrppart="$(mount | grep -i optional | grep cde | awk -F / '{print $3}' | uniq | cut -c 1-3)3"
local_cache="/mnt/${tcrppart}/auxfiles"
[ ! -d ${local_cache} ] && sudo mkdir -p ${local_cache}
[ -h /home/tc/custom-module ] && unlink /home/tc/custom-module
[ ! -h /home/tc/custom-module ] && sudo ln -s $local_cache /home/tc/custom-module
if [ -z "$TARGET_PLATFORM" ] || [ -z "$TARGET_VERSION" ] || [ -z "$TARGET_REVISION" ]; then
echo "Error : Platform not found "
showhelp
exit 99
fi
case $TARGET_PLATFORM in
bromolow)
KERNEL_MAJOR="3"
MODULE_ALIAS_FILE="modules.alias.3.json"
;;
apollolake | broadwell | broadwellnk | v1000 | denverton | geminilake)
KERNEL_MAJOR="4"
MODULE_ALIAS_FILE="modules.alias.4.json"
;;
esac
if [ "${TARGET_PLATFORM}" = "apollolake" ]; then
SYNOMODEL="ds918p_$TARGET_REVISION" && MODEL="DS918+"
elif [ "${TARGET_PLATFORM}" = "bromolow" ]; then
SYNOMODEL="ds3615xs_$TARGET_REVISION" && MODEL="DS3615xs"
elif [ "${TARGET_PLATFORM}" = "broadwell" ]; then
SYNOMODEL="ds3617xs_$TARGET_REVISION" && MODEL="DS3617xs"
elif [ "${TARGET_PLATFORM}" = "broadwellnk" ]; then
SYNOMODEL="ds3622xsp_$TARGET_REVISION" && MODEL="DS3622xs+"
elif [ "${TARGET_PLATFORM}" = "v1000" ]; then
SYNOMODEL="ds1621p_$TARGET_REVISION" && MODEL="DS1621+"
elif [ "${TARGET_PLATFORM}" = "denverton" ]; then
SYNOMODEL="dva3221_$TARGET_REVISION" && MODEL="DVA3221"
elif [ "${TARGET_PLATFORM}" = "geminilake" ]; then
SYNOMODEL="ds920p_$TARGET_REVISION" && MODEL="DS920+"
fi
#echo "Platform : $platform_selected"
echo "Rploader Version : ${rploaderver}"
echo "Loader source : $LD_SOURCE_URL Loader Branch : $LD_BRANCH "
echo "Redpill module source : $LKM_SOURCE_URL : Redpill module branch : $LKM_BRANCH "
echo "Extensions : $EXTENSIONS "
echo "Extensions URL : $EXTENSIONS_SOURCE_URL"
echo "TOOLKIT_URL : $TOOLKIT_URL"
echo "TOOLKIT_SHA : $TOOLKIT_SHA"
echo "SYNOKERNEL_URL : $SYNOKERNEL_URL"
echo "SYNOKERNEL_SHA : $SYNOKERNEL_SHA"
echo "COMPILE_METHOD : $COMPILE_METHOD"
echo "TARGET_PLATFORM : $TARGET_PLATFORM"
echo "TARGET_VERSION : $TARGET_VERSION"
echo "TARGET_REVISION : $TARGET_REVISION"
echo "REDPILL_LKM_MAKE_TARGET : $REDPILL_LKM_MAKE_TARGET"
echo "KERNEL_MAJOR : $KERNEL_MAJOR"
echo "MODULE_ALIAS_FILE : $MODULE_ALIAS_FILE"
echo "SYNOMODEL : $SYNOMODEL "
echo "MODEL : $MODEL "
echo "Local Cache Folder : $local_cache"
echo "DATE Internet : $INTERNETDATE Local : $LOCALDATE"
if [ "$INTERNETDATE" != "$LOCALDATE" ]; then
echo "ERROR ! System DATE is not correct"
echo "Downloading ntpclient to assist"
tce-load -iw ntpclient 2>&1 >/dev/null
export TZ="${timezone}"
sudo ntpclient -s -h ${ntpserver} 2>&1 >/dev/null
echo "Current time after communicating with NTP server ${ntpserver} : $(date) "
fi
}
function matchpciidmodule() {
vendor="$(echo $1 | sed 's/[a-z]/\U&/g')"
device="$(echo $2 | sed 's/[a-z]/\U&/g')"
pciid="${vendor}d0000${device}"
#jq -e -r ".modules[] | select(.alias | test(\"(?i)${1}\")?) | .name " modules.alias.json
# Correction to work with tinycore jq
matchedmodule=$(jq -e -r ".modules[] | select(.alias | contains(\"${pciid}\")?) | .name " $MODULE_ALIAS_FILE)
# Call listextensions for extention matching
echo "$matchedmodule"
listextension $matchedmodule
}
function listpci() {
lspci -n | while read line; do
bus="$(echo $line | cut -c 1-7)"
class="$(echo $line | cut -c 9-12)"
vendor="$(echo $line | cut -c 15-18)"
device="$(echo $line | cut -c 20-23)"
#echo "PCI : $bus Class : $class Vendor: $vendor Device: $device"
case $class in
0100)
echo "Found SCSI Controller : pciid ${vendor}d0000${device} Required Extension : $(matchpciidmodule ${vendor} ${device})"
;;
0106)
echo "Found SATA Controller : pciid ${vendor}d0000${device} Required Extension : $(matchpciidmodule ${vendor} ${device})"
;;
0101)
echo "Found IDE Controller : pciid ${vendor}d0000${device} Required Extension : $(matchpciidmodule ${vendor} ${device})"
;;
0107)
echo "Found SAS Controller : pciid ${vendor}d0000${device} Required Extension : $(matchpciidmodule ${vendor} ${device})"
;;
0200)
echo "Found Ethernet Interface : pciid ${vendor}d0000${device} Required Extension : $(matchpciidmodule ${vendor} ${device})"
;;
0300)
echo "Found VGA Controller : pciid ${vendor}d0000${device} Required Extension : $(matchpciidmodule ${vendor} ${device})"
;;
0c04)
echo "Found Fibre Channel Controller : pciid ${vendor}d0000${device} Required Extension : $(matchpciidmodule ${vendor} ${device})"
;;
esac
done
}
function getmodulealiasjson() {
echo "{"
echo "\"modules\" : ["
for module in $(ls *.ko); do
if [ $(modinfo ./$module --field alias | grep -ie pci -ie usb | wc -l) -ge 1 ]; then
for alias in $(modinfo ./$module --field alias | grep -ie pci -ie usb); do
echo "{"
echo "\"name\" : \"${module}\"",
echo "\"alias\" : \"${alias}\""
echo "}",
done
fi
# echo "},"
done | sed '$ s/,//'
echo "]"
echo "}"
#
# To query alias for module run #cat n | jq '.modules[] | select(.alias | test ("8086d00001000")?) .name'
# or cat modules.alias.json | jq '.modules[] | select(.alias | test("(?i)1000d00000030")?) | .name'
#
#
}
function getmodaliasfile() {
echo "{"
echo "\"modules\" : ["
grep -ie pci -ie usb /lib/modules/$(uname -r)/modules.alias | while read line; do
read alias pciid module <<<"$line"
echo "{"
echo "\"name\" : \"${module}\"",
echo "\"alias\" : \"${pciid}\""
echo "}",
# echo "},"
done | sed '$ s/,//'
echo "]"
echo "}"
}
function listmodules() {
if [ ! -f $MODULE_ALIAS_FILE ]; then
echo "Creating module alias json file"
getmodaliasfile >modules.alias.4.json
fi
echo -n "Testing $MODULE_ALIAS_FILE -> "
if $(jq '.' $MODULE_ALIAS_FILE >/dev/null); then
echo "File OK"
echo "------------------------------------------------------------------------------------------------"
echo -e "It looks that you will need the following modules : \n\n"
listpci
echo "------------------------------------------------------------------------------------------------"
else
echo "Error : File $MODULE_ALIAS_FILE could not be parsed"
fi
}
function listextension() {
if [ ! -f rpext-index.json ]; then
curl --progress-bar --location "${modextention}" --output rpext-index.json
fi
## Get extension author rpext-index.json and then parse for extension download with :
# jq '. | select(.id | contains("vxge")) .url ' rpext-index.json
if [ ! -z $1 ]; then
echo "Searching for matching extension for $1"
matchingextension=($(jq ". | select(.id | contains(\"${1}\")) .url " rpext-index.json))
if [ ! -z $matchingextension ]; then
echo "Found matching extension : "
echo $matchingextension
./redpill-load/ext-manager.sh add "${matchingextension//\"/}"
fi
extensionslist+="${matchingextension} "
#echo $extensionslist
else
echo "No matching extension"
fi
}
function ext_manager() {
local _SCRIPTNAME="${0}"
local _ACTION="${1}"
local _PLATFORM_VERSION="${2}"
shift 2
local _REDPILL_LOAD_SRC="/home/tc/redpill-load"
export MRP_SRC_NAME="${_SCRIPTNAME} ${_ACTION} ${_PLATFORM_VERSION}"
${_REDPILL_LOAD_SRC}/ext-manager.sh $@
exit $?
}
if [ $# -lt 2 ]; then
syntaxcheck $@
fi
case $1 in
download)
getvars $2
checkinternet
gitdownload
;;
build)
getvars $2
checkinternet
getlatestrploader
gitdownload
case $3 in
compile)
prepareforcompile
if [ "$COMPILE_METHOD" = "toolkit_dev" ]; then
gettoolchain
compileredpill
echo "Starting loader creation "
buildloader
else
getsynokernel
kernelprepare
compileredpill
echo "Starting loader creation "
buildloader
fi
;;
manual)
echo "Using static compiled redpill extension"
getstaticmodule
echo "Got $REDPILL_MOD_NAME "
echo "Manual extension handling,skipping extension auto detection "
echo "Starting loader creation "
buildloader
[ $? -eq 0 ] && savesession
;;
jun)
echo "Using static compiled redpill extension"
getstaticmodule
echo "Got $REDPILL_MOD_NAME "
listmodules
echo "Starting loader creation "
buildloader junmod
[ $? -eq 0 ] && savesession
;;
static | *)
echo "No extra build option or static specified, using default <static> "
echo "Using static compiled redpill extension"
getstaticmodule
echo "Got $REDPILL_MOD_NAME "
listmodules
echo "Starting loader creation "
buildloader
[ $? -eq 0 ] && savesession
;;
esac
;;
\
ext)
getvars $2
checkinternet
gitdownload
if [ "$3" = "auto" ]; then
listmodules
else
ext_manager $@ # instead of listmodules
fi
;;
restoresession)
getvars $2
checkinternet
gitdownload
restoresession
;;
clean)
cleanloader
;;
update)
checkinternet
getlatestrploader
;;
listmods)
getvars $2
checkinternet
gitdownload
listmodules
echo "$extensionslist"
;;
serialgen)
serialgen $@
;;
interactive)
if [ -f interactive.sh ]; then
. ./interactive.sh
else
curl --location --progress-bar "https://github.com/pocopico/tinycore-redpill/raw/$build/interactive.sh" --output interactive.sh
. ./interactive.sh
exit 99
fi
;;
identifyusb)
usbidentify
;;
patchdtc)
getvars $2
checkinternet
patchdtc
;;
satamap)
satamap
;;
backup)
backup
;;
backuploader)
backuploader
;;
restoreloader)
restoreloader
;;
postupdate)
getvars $2
checkinternet
gitdownload
getstaticmodule
postupdate
[ $? -eq 0 ] && savesession
;;
mountdsmroot)
mountdsmroot
;;
fullupgrade)
fullupgrade
;;
mountshare)
mountshare
;;
installapache)
installapache
;;
version)
version $@
;;
help)
showhelp
exit 99
;;
monitor)
monitor
exit 0
;;
*)
showsyntax
exit 99
;;
esac
此处可能存在不合适展示的内容，页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容，可点击提交进行申诉，我们将尽快为您处理。
马建仓 AI 助手
