1 Star 0 Fork 101

pjscc/hiviewdfx_hiview_lite

加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
克隆/下载
hiview_util.c 5.62 KB
一键复制 编辑 原始数据 按行查看 历史
Caoruihong 提交于 2021-11-17 09:23 . chore: kernel/arch was moved to arch
/*
* Copyright (c) 2020 Huawei Device Co., Ltd.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "hiview_util.h"
#include <fcntl.h>
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <time.h>
#include <unistd.h>
#include "cmsis_os.h"
#if defined(CHIP_VER_Hi3861) || \
defined(CHIP_VER_Hi3861L) || \
defined(CHIP_VER_Hi3881)
#include "los_hwi.h"
#else
#include "../../../kernel/liteos_m/arch/include/los_interrupt.h"
#endif
extern void HAL_NVIC_SystemReset(void);
extern void __disable_irq(void);
extern void __enable_irq(void);
#define HIVIEW_WAIT_FOREVER osWaitForever
#define HIVIEW_MS_PER_SECOND 1000
#define HIVIEW_NS_PER_MILLISECOND 1000000
#define BUFFER_SIZE 128
void *HIVIEW_MemAlloc(uint8 modId, uint32 size)
{
(void)modId;
return malloc(size);
}
void HIVIEW_MemFree(uint8 modId, void *pMem)
{
(void)modId;
free(pMem);
}
uint64 HIVIEW_GetCurrentTime()
{
struct timespec current = {0};
int ret = clock_gettime(CLOCK_REALTIME, &current);
if (ret == 0) {
return (uint64)current.tv_sec * HIVIEW_MS_PER_SECOND + current.tv_nsec / HIVIEW_NS_PER_MILLISECOND;
} else {
return 0;
}
}
int32 HIVIEW_RtcGetCurrentTime(uint64 *val, HIVIEW_RtcTime *time)
{
(void)val;
(void)time;
return OHOS_SUCCESS;
}
HiviewMutexId_t HIVIEW_MutexInit()
{
return (HiviewMutexId_t)osMutexNew(NULL);
}
int32 HIVIEW_MutexLock(HiviewMutexId_t mutex)
{
if (mutex == NULL) {
return -1;
}
return (int32)osMutexAcquire((osMutexId_t)mutex, HIVIEW_WAIT_FOREVER);
}
int32 HIVIEW_MutexLockOrWait(HiviewMutexId_t mutex, uint32 timeout)
{
if (mutex == NULL) {
return -1;
}
return (int32)osMutexAcquire((osMutexId_t)mutex, timeout);
}
int32 HIVIEW_MutexUnlock(HiviewMutexId_t mutex)
{
if (mutex == NULL) {
return -1;
}
return (int32)osMutexRelease((osMutexId_t)mutex);
}
uint32 HIVIEW_IntLock()
{
return LOS_IntLock();
}
void HIVIEW_IntRestore(uint32 intSave)
{
LOS_IntRestore(intSave);
}
uint32 HIVIEW_GetTaskId()
{
return (uint32)osThreadGetId();
}
void HIVIEW_UartPrint(const char *str)
{
printf("%s\n", str);
}
void HIVIEW_Sleep(uint32 ms)
{
osDelay(ms / HIVIEW_MS_PER_SECOND);
}
int32 HIVIEW_FileOpen(const char *path)
{
return open(path, O_RDWR | O_CREAT, 0);
}
int32 HIVIEW_FileClose(int32 handle)
{
return close(handle);
}
int32 HIVIEW_FileRead(int32 handle, uint8 *buf, uint32 len)
{
return read(handle, (char *)buf, len);
}
int32 HIVIEW_FileWrite(int32 handle, const uint8 *buf, uint32 len)
{
return write(handle, (const char *)buf, len);
}
int32 HIVIEW_FileSeek(int32 handle, int32 offset, int32 whence)
{
return lseek(handle, (off_t)offset, whence);
}
int32 HIVIEW_FileSize(int32 handle)
{
return lseek(handle, 0, SEEK_END);
}
int32 HIVIEW_FileSync(int32 handle)
{
return fsync(handle);
}
int32 HIVIEW_FileUnlink(const char *path)
{
return unlink(path);
}
int32 HIVIEW_FileCopy(const char *src, const char *dest)
{
if (src == NULL || dest == NULL) {
HIVIEW_UartPrint("HIVIEW_FileCopy input param is NULL");
return -1;
}
int32 fdSrc = open(src, O_RDONLY, 0);
if (fdSrc < 0) {
HIVIEW_UartPrint("HIVIEW_FileCopy open src file fail");
return fdSrc;
}
int32 fdDest = open(dest, O_RDWR | O_CREAT | O_TRUNC, 0);
if (fdDest < 0) {
HIVIEW_UartPrint("HIVIEW_FileCopy open dest file fail");
HIVIEW_FileClose(fdSrc);
return fdDest;
}
boolean copyFailed = TRUE;
uint8 *dataBuf = (uint8 *)HIVIEW_MemAlloc(MEM_POOL_HIVIEW_ID, BUFFER_SIZE);
if (dataBuf == NULL) {
HIVIEW_UartPrint("HIVIEW_FileCopy malloc error");
goto MALLOC_ERROR;
}
int32 nLen = HIVIEW_FileRead(fdSrc, dataBuf, BUFFER_SIZE);
while (nLen > 0) {
if (HIVIEW_FileWrite(fdDest, dataBuf, nLen) != nLen) {
goto EXIT;
}
nLen = HIVIEW_FileRead(fdSrc, dataBuf, BUFFER_SIZE);
}
copyFailed = (nLen < 0);
EXIT:
free(dataBuf);
MALLOC_ERROR:
HIVIEW_FileClose(fdSrc);
HIVIEW_FileClose(fdDest);
if (copyFailed) {
HIVIEW_UartPrint("HIVIEW_FileCopy copy failed");
HIVIEW_FileUnlink(dest);
return -1;
}
return 0;
}
int32 HIVIEW_FileMove(const char *src, const char *dest)
{
int32 ret = HIVIEW_FileCopy(src, dest);
if (HIVIEW_FileUnlink(src) != 0 || ret != 0) {
return -1;
}
return 0;
}
void HIVIEW_WatchDogSystemReset()
{
/* reset MCU Core */
HAL_NVIC_SystemReset();
}
uint8 HIVIEW_WdgResetFlag()
{
/* Depend:HAL_WdgGetResetFlag */
return 1;
}
uint32 Change32Endian(uint32 num)
{
unsigned char *buffer = (unsigned char *)&num;
uint32 newEndian = (buffer[3] & 0xFF);
newEndian |= ((buffer[2] << 8) & 0xFF00);
newEndian |= ((buffer[1] << 16) & 0xFF0000);
newEndian |= ((buffer[0] << 24) & 0xFF000000);
return newEndian;
}
uint16 Change16Endian(uint16 num)
{
unsigned char* buffer = (unsigned char*)&num;
uint16 newEndian = (buffer[1] & 0xFF);
newEndian |= ((buffer[0] << 8) & 0xFF00);
return newEndian;
}
马建仓 AI 助手
尝试更多
代码解读
代码找茬
代码优化
1
https://gitee.com/pjscc/hiviewdfx_hiview_lite.git
git@gitee.com:pjscc/hiviewdfx_hiview_lite.git
pjscc
hiviewdfx_hiview_lite
hiviewdfx_hiview_lite
master

搜索帮助