代码拉取完成，页面将自动刷新
同步操作将从 OpenHarmony/third_party_curl 强制同步，此操作会覆盖自 Fork 仓库以来所做的任何修改，且无法恢复！！！
确定后同步将在后台操作，完成时将刷新页面，请耐心等待。
# Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2021 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#***************************************************************************
# _ _ ____ _
# Project ___| | | | _ \| |
# / __| | | | |_) | |
# | (__| |_| | _ <| |___
# \___|\___/|_| \_\_____|
#
# Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at https://curl.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
# SPDX-License-Identifier: curl
#
###########################################################################
#***************************************************************************
# _ _ ____ _
# Project ___| | | | _ \| |
# / __| | | | |_) | |
# | (__| |_| | _ <| |___
# \___|\___/|_| \_\_____|
#
# Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at https://curl.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
# SPDX-License-Identifier: curl
#
###########################################################################
#***************************************************************************
# _ _ ____ _
# Project ___| | | | _ \| |
# / __| | | | |_) | |
# | (__| |_| | _ <| |___
# \___|\___/|_| \_\_____|
#
# Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at https://curl.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
# SPDX-License-Identifier: curl
#
###########################################################################
# ./src/Makefile.inc
# Using the backslash as line continuation character might be problematic with
# some make flavours. If we ever want to change this in a portable manner then
# we should consider this idea :
# CSRC1 = file1.c file2.c file3.c
# CSRC2 = file4.c file5.c file6.c
# CSOURCES = $(CSRC1) $(CSRC2)
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/curl-amissl.m4 \
$(top_srcdir)/m4/curl-bearssl.m4 \
$(top_srcdir)/m4/curl-compilers.m4 \
$(top_srcdir)/m4/curl-confopts.m4 \
$(top_srcdir)/m4/curl-functions.m4 \
$(top_srcdir)/m4/curl-gnutls.m4 \
$(top_srcdir)/m4/curl-mbedtls.m4 \
$(top_srcdir)/m4/curl-openssl.m4 \
$(top_srcdir)/m4/curl-override.m4 \
$(top_srcdir)/m4/curl-reentrant.m4 \
$(top_srcdir)/m4/curl-rustls.m4 \
$(top_srcdir)/m4/curl-schannel.m4 \
$(top_srcdir)/m4/curl-sectransp.m4 \
$(top_srcdir)/m4/curl-sysconfig.m4 \
$(top_srcdir)/m4/curl-wolfssl.m4 $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
$(top_srcdir)/m4/xc-am-iface.m4 \
$(top_srcdir)/m4/xc-cc-check.m4 \
$(top_srcdir)/m4/xc-lt-iface.m4 \
$(top_srcdir)/m4/xc-translit.m4 \
$(top_srcdir)/m4/xc-val-flgs.m4 \
$(top_srcdir)/m4/zz40-xc-ovr.m4 \
$(top_srcdir)/m4/zz50-xc-ovr.m4 \
$(top_srcdir)/m4/zz60-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/lib/curl_config.h
CONFIG_CLEAN_FILES = curl-config libcurl.pc
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
SCRIPTS = $(bin_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
DATA = $(pkgconfig_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/curl-config.in \
$(srcdir)/lib/Makefile.inc $(srcdir)/libcurl.pc.in \
$(srcdir)/src/Makefile.inc COPYING README compile config.guess \
config.sub depcomp install-sh ltmain.sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
if test -d "$(distdir)"; then \
find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -rf "$(distdir)" \
|| { sleep 5 && rm -rf "$(distdir)"; }; \
else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
| sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
APACHECTL = @APACHECTL@
APXS = @APXS@
AR = @AR@
AR_FLAGS = @AR_FLAGS@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BLANK_AT_MAKETIME = @BLANK_AT_MAKETIME@
CADDY = @CADDY@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CFLAG_CURL_SYMBOL_HIDING = @CFLAG_CURL_SYMBOL_HIDING@
CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPPFLAG_CURL_STATICLIB = @CPPFLAG_CURL_STATICLIB@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CURLVERSION = @CURLVERSION@
CURL_CA_BUNDLE = @CURL_CA_BUNDLE@
CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@
CURL_DISABLE_DICT = @CURL_DISABLE_DICT@
CURL_DISABLE_FILE = @CURL_DISABLE_FILE@
CURL_DISABLE_FTP = @CURL_DISABLE_FTP@
CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@
CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@
CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@
CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@
CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@
CURL_DISABLE_MQTT = @CURL_DISABLE_MQTT@
CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@
CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@
CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@
CURL_DISABLE_SMB = @CURL_DISABLE_SMB@
CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@
CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@
CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@
CURL_LT_SHLIB_VERSIONED_FLAVOUR = @CURL_LT_SHLIB_VERSIONED_FLAVOUR@
CURL_NETWORK_AND_TIME_LIBS = @CURL_NETWORK_AND_TIME_LIBS@
CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@
CURL_PLIST_VERSION = @CURL_PLIST_VERSION@
CURL_WITH_MULTI_SSL = @CURL_WITH_MULTI_SSL@
CYGPATH_W = @CYGPATH_W@
DEFAULT_SSL_BACKEND = @DEFAULT_SSL_BACKEND@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ENABLE_SHARED = @ENABLE_SHARED@
ENABLE_STATIC = @ENABLE_STATIC@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILECMD = @FILECMD@
FISH_FUNCTIONS_DIR = @FISH_FUNCTIONS_DIR@
GCOV = @GCOV@
GREP = @GREP@
HAVE_BROTLI = @HAVE_BROTLI@
HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@
HAVE_LDAP_SSL = @HAVE_LDAP_SSL@
HAVE_LIBZ = @HAVE_LIBZ@
HAVE_OPENSSL_QUIC = @HAVE_OPENSSL_QUIC@
HAVE_OPENSSL_SRP = @HAVE_OPENSSL_SRP@
HAVE_PROTO_BSDSOCKET_H = @HAVE_PROTO_BSDSOCKET_H@
HAVE_ZSTD = @HAVE_ZSTD@
HTTPD = @HTTPD@
HTTPD_NGHTTPX = @HTTPD_NGHTTPX@
IDN_ENABLED = @IDN_ENABLED@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
IPV6_ENABLED = @IPV6_ENABLED@
LCOV = @LCOV@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBCURL_LIBS = @LIBCURL_LIBS@
LIBCURL_NO_SHARED = @LIBCURL_NO_SHARED@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MANOPT = @MANOPT@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
NROFF = @NROFF@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKGADD_NAME = @PKGADD_NAME@
PKGADD_PKG = @PKGADD_PKG@
PKGADD_VENDOR = @PKGADD_VENDOR@
PKGCONFIG = @PKGCONFIG@
RANDOM_FILE = @RANDOM_FILE@
RANLIB = @RANLIB@
RC = @RC@
REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SSL_BACKENDS = @SSL_BACKENDS@
SSL_ENABLED = @SSL_ENABLED@
SSL_LIBS = @SSL_LIBS@
STRIP = @STRIP@
SUPPORT_FEATURES = @SUPPORT_FEATURES@
SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@
TEST_NGHTTPX = @TEST_NGHTTPX@
USE_ARES = @USE_ARES@
USE_BEARSSL = @USE_BEARSSL@
USE_GNUTLS = @USE_GNUTLS@
USE_HYPER = @USE_HYPER@
USE_LIBRTMP = @USE_LIBRTMP@
USE_LIBSSH = @USE_LIBSSH@
USE_LIBSSH2 = @USE_LIBSSH2@
USE_MBEDTLS = @USE_MBEDTLS@
USE_MSH3 = @USE_MSH3@
USE_NGHTTP2 = @USE_NGHTTP2@
USE_NGHTTP3 = @USE_NGHTTP3@
USE_NGTCP2 = @USE_NGTCP2@
USE_NGTCP2_CRYPTO_BORINGSSL = @USE_NGTCP2_CRYPTO_BORINGSSL@
USE_NGTCP2_CRYPTO_GNUTLS = @USE_NGTCP2_CRYPTO_GNUTLS@
USE_NGTCP2_CRYPTO_QUICTLS = @USE_NGTCP2_CRYPTO_QUICTLS@
USE_NGTCP2_CRYPTO_WOLFSSL = @USE_NGTCP2_CRYPTO_WOLFSSL@
USE_NGTCP2_H3 = @USE_NGTCP2_H3@
USE_OPENLDAP = @USE_OPENLDAP@
USE_OPENSSL_H3 = @USE_OPENSSL_H3@
USE_OPENSSL_QUIC = @USE_OPENSSL_QUIC@
USE_QUICHE = @USE_QUICHE@
USE_RUSTLS = @USE_RUSTLS@
USE_SCHANNEL = @USE_SCHANNEL@
USE_SECTRANSP = @USE_SECTRANSP@
USE_UNIX_SOCKETS = @USE_UNIX_SOCKETS@
USE_WIN32_CRYPTO = @USE_WIN32_CRYPTO@
USE_WIN32_LARGE_FILES = @USE_WIN32_LARGE_FILES@
USE_WIN32_SMALL_FILES = @USE_WIN32_SMALL_FILES@
USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@
USE_WOLFSSH = @USE_WOLFSSH@
USE_WOLFSSL = @USE_WOLFSSL@
VERSION = @VERSION@
VERSIONNUM = @VERSIONNUM@
ZLIB_LIBS = @ZLIB_LIBS@
ZSH_FUNCTIONS_DIR = @ZSH_FUNCTIONS_DIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libext = @libext@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = foreign
ACLOCAL_AMFLAGS = -I m4
CMAKE_DIST = \
CMake/cmake_uninstall.cmake.in \
CMake/CMakeConfigurableFile.in \
CMake/curl-config.cmake.in \
CMake/CurlSymbolHiding.cmake \
CMake/CurlTests.c \
CMake/FindBearSSL.cmake \
CMake/FindBrotli.cmake \
CMake/FindCARES.cmake \
CMake/FindGSS.cmake \
CMake/FindLibPSL.cmake \
CMake/FindLibSSH2.cmake \
CMake/FindMbedTLS.cmake \
CMake/FindMSH3.cmake \
CMake/FindNGHTTP2.cmake \
CMake/FindNGHTTP3.cmake \
CMake/FindNGTCP2.cmake \
CMake/FindQUICHE.cmake \
CMake/FindWolfSSL.cmake \
CMake/FindZstd.cmake \
CMake/Macros.cmake \
CMake/OtherTests.cmake \
CMake/PickyWarnings.cmake \
CMake/Platforms/WindowsCache.cmake \
CMake/Utilities.cmake \
CMakeLists.txt
VC14_LIBTMPL = projects/Windows/VC14/lib/libcurl.tmpl
VC14_LIBVCXPROJ = projects/Windows/VC14/lib/libcurl.vcxproj.dist
VC14_LIBVCXPROJ_DEPS = $(VC14_LIBTMPL) Makefile.am lib/Makefile.inc
VC14_SRCTMPL = projects/Windows/VC14/src/curl.tmpl
VC14_SRCVCXPROJ = projects/Windows/VC14/src/curl.vcxproj.dist
VC14_SRCVCXPROJ_DEPS = $(VC14_SRCTMPL) Makefile.am src/Makefile.inc
VC14_10_LIBTMPL = projects/Windows/VC14.10/lib/libcurl.tmpl
VC14_10_LIBVCXPROJ = projects/Windows/VC14.10/lib/libcurl.vcxproj.dist
VC14_10_LIBVCXPROJ_DEPS = $(VC14_10_LIBTMPL) Makefile.am lib/Makefile.inc
VC14_10_SRCTMPL = projects/Windows/VC14.10/src/curl.tmpl
VC14_10_SRCVCXPROJ = projects/Windows/VC14.10/src/curl.vcxproj.dist
VC14_10_SRCVCXPROJ_DEPS = $(VC14_10_SRCTMPL) Makefile.am src/Makefile.inc
VC14_20_LIBTMPL = projects/Windows/VC14.20/lib/libcurl.tmpl
VC14_20_LIBVCXPROJ = projects/Windows/VC14.20/lib/libcurl.vcxproj.dist
VC14_20_LIBVCXPROJ_DEPS = $(VC14_20_LIBTMPL) Makefile.am lib/Makefile.inc
VC14_20_SRCTMPL = projects/Windows/VC14.20/src/curl.tmpl
VC14_20_SRCVCXPROJ = projects/Windows/VC14.20/src/curl.vcxproj.dist
VC14_20_SRCVCXPROJ_DEPS = $(VC14_20_SRCTMPL) Makefile.am src/Makefile.inc
VC14_30_LIBTMPL = projects/Windows/VC14.30/lib/libcurl.tmpl
VC14_30_LIBVCXPROJ = projects/Windows/VC14.30/lib/libcurl.vcxproj.dist
VC14_30_LIBVCXPROJ_DEPS = $(VC14_30_LIBTMPL) Makefile.am lib/Makefile.inc
VC14_30_SRCTMPL = projects/Windows/VC14.30/src/curl.tmpl
VC14_30_SRCVCXPROJ = projects/Windows/VC14.30/src/curl.vcxproj.dist
VC14_30_SRCVCXPROJ_DEPS = $(VC14_30_SRCTMPL) Makefile.am src/Makefile.inc
VC_DIST = projects/README.md \
projects/build-openssl.bat \
projects/build-wolfssl.bat \
projects/checksrc.bat \
projects/Windows/VC14/curl-all.sln \
projects/Windows/VC14/lib/libcurl.sln \
projects/Windows/VC14/lib/libcurl.vcxproj.filters \
projects/Windows/VC14/src/curl.sln \
projects/Windows/VC14/src/curl.vcxproj.filters \
projects/Windows/VC14.10/curl-all.sln \
projects/Windows/VC14.10/lib/libcurl.sln \
projects/Windows/VC14.10/lib/libcurl.vcxproj.filters \
projects/Windows/VC14.10/src/curl.sln \
projects/Windows/VC14.10/src/curl.vcxproj.filters \
projects/Windows/VC14.20/curl-all.sln \
projects/Windows/VC14.20/lib/libcurl.sln \
projects/Windows/VC14.20/lib/libcurl.vcxproj.filters \
projects/Windows/VC14.20/src/curl.sln \
projects/Windows/VC14.20/src/curl.vcxproj.filters \
projects/Windows/VC14.30/curl-all.sln \
projects/Windows/VC14.30/lib/libcurl.sln \
projects/Windows/VC14.30/lib/libcurl.vcxproj.filters \
projects/Windows/VC14.30/src/curl.sln \
projects/Windows/VC14.30/src/curl.vcxproj.filters \
projects/generate.bat \
projects/wolfssl_options.h \
projects/wolfssl_override.props
WINBUILD_DIST = winbuild/README.md winbuild/gen_resp_file.bat \
winbuild/MakefileBuild.vc winbuild/Makefile.vc
PLAN9_DIST = plan9/include/mkfile \
plan9/include/mkfile \
plan9/mkfile.proto \
plan9/mkfile \
plan9/README \
plan9/lib/mkfile.inc \
plan9/lib/mkfile \
plan9/src/mkfile.inc \
plan9/src/mkfile
EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in \
RELEASE-NOTES buildconf libcurl.pc.in MacOSX-Framework $(CMAKE_DIST) \
$(VC_DIST) $(WINBUILD_DIST) $(PLAN9_DIST) lib/libcurl.vers.in buildconf.bat \
libcurl.def
CLEANFILES = $(VC14_LIBVCXPROJ) $(VC14_SRCVCXPROJ) \
$(VC14_10_LIBVCXPROJ) $(VC14_10_SRCVCXPROJ) \
$(VC14_20_LIBVCXPROJ) $(VC14_20_SRCVCXPROJ) \
$(VC14_30_LIBVCXPROJ) $(VC14_30_SRCVCXPROJ)
bin_SCRIPTS = curl-config
SUBDIRS = lib src
DIST_SUBDIRS = $(SUBDIRS) tests packages scripts include docs
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = libcurl.pc
LIB_VAUTH_CFILES = \
vauth/cleartext.c \
vauth/cram.c \
vauth/digest.c \
vauth/digest_sspi.c \
vauth/gsasl.c \
vauth/krb5_gssapi.c \
vauth/krb5_sspi.c \
vauth/ntlm.c \
vauth/ntlm_sspi.c \
vauth/oauth2.c \
vauth/spnego_gssapi.c \
vauth/spnego_sspi.c \
vauth/vauth.c
LIB_VAUTH_HFILES = \
vauth/digest.h \
vauth/ntlm.h \
vauth/vauth.h
LIB_VTLS_CFILES = \
vtls/bearssl.c \
vtls/gtls.c \
vtls/hostcheck.c \
vtls/keylog.c \
vtls/mbedtls.c \
vtls/mbedtls_threadlock.c \
vtls/openssl.c \
vtls/rustls.c \
vtls/schannel.c \
vtls/schannel_verify.c \
vtls/sectransp.c \
vtls/vtls.c \
vtls/wolfssl.c \
vtls/x509asn1.c
LIB_VTLS_HFILES = \
vtls/bearssl.h \
vtls/gtls.h \
vtls/hostcheck.h \
vtls/keylog.h \
vtls/mbedtls.h \
vtls/mbedtls_threadlock.h \
vtls/openssl.h \
vtls/rustls.h \
vtls/schannel.h \
vtls/schannel_int.h \
vtls/sectransp.h \
vtls/vtls.h \
vtls/vtls_int.h \
vtls/wolfssl.h \
vtls/x509asn1.h
LIB_VQUIC_CFILES = \
vquic/curl_msh3.c \
vquic/curl_ngtcp2.c \
vquic/curl_osslq.c \
vquic/curl_quiche.c \
vquic/vquic.c \
vquic/vquic-tls.c
LIB_VQUIC_HFILES = \
vquic/curl_msh3.h \
vquic/curl_ngtcp2.h \
vquic/curl_osslq.h \
vquic/curl_quiche.h \
vquic/vquic.h \
vquic/vquic_int.h \
vquic/vquic-tls.h
LIB_VSSH_CFILES = \
vssh/libssh.c \
vssh/libssh2.c \
vssh/wolfssh.c
LIB_VSSH_HFILES = \
vssh/ssh.h
LIB_CFILES = \
altsvc.c \
amigaos.c \
asyn-ares.c \
asyn-thread.c \
base64.c \
bufq.c \
bufref.c \
c-hyper.c \
cf-h1-proxy.c \
cf-h2-proxy.c \
cf-haproxy.c \
cf-https-connect.c \
cf-socket.c \
cfilters.c \
conncache.c \
connect.c \
content_encoding.c \
cookie.c \
curl_addrinfo.c \
curl_des.c \
curl_endian.c \
curl_fnmatch.c \
curl_get_line.c \
curl_gethostname.c \
curl_gssapi.c \
curl_memrchr.c \
curl_multibyte.c \
curl_ntlm_core.c \
curl_ntlm_wb.c \
curl_path.c \
curl_range.c \
curl_rtmp.c \
curl_sasl.c \
curl_sspi.c \
curl_threads.c \
curl_trc.c \
dict.c \
doh.c \
dynbuf.c \
dynhds.c \
easy.c \
easygetopt.c \
easyoptions.c \
escape.c \
file.c \
fileinfo.c \
fopen.c \
formdata.c \
ftp.c \
ftplistparser.c \
getenv.c \
getinfo.c \
gopher.c \
hash.c \
headers.c \
hmac.c \
hostasyn.c \
hostip.c \
hostip4.c \
hostip6.c \
hostsyn.c \
hsts.c \
http.c \
http1.c \
http2.c \
http_aws_sigv4.c \
http_chunks.c \
http_digest.c \
http_negotiate.c \
http_ntlm.c \
http_proxy.c \
idn.c \
if2ip.c \
imap.c \
inet_ntop.c \
inet_pton.c \
krb5.c \
ldap.c \
llist.c \
macos.c \
md4.c \
md5.c \
memdebug.c \
mime.c \
mprintf.c \
mqtt.c \
multi.c \
netrc.c \
nonblock.c \
noproxy.c \
openldap.c \
parsedate.c \
pingpong.c \
pop3.c \
progress.c \
psl.c \
rand.c \
rename.c \
rtsp.c \
select.c \
sendf.c \
setopt.c \
sha256.c \
share.c \
slist.c \
smb.c \
smtp.c \
socketpair.c \
socks.c \
socks_gssapi.c \
socks_sspi.c \
speedcheck.c \
splay.c \
strcase.c \
strdup.c \
strerror.c \
strtok.c \
strtoofft.c \
system_win32.c \
telnet.c \
tftp.c \
timediff.c \
timeval.c \
transfer.c \
url.c \
urlapi.c \
version.c \
version_win32.c \
warnless.c \
ws.c
LIB_HFILES = \
altsvc.h \
amigaos.h \
arpa_telnet.h \
asyn.h \
bufq.h \
bufref.h \
c-hyper.h \
cf-h1-proxy.h \
cf-h2-proxy.h \
cf-haproxy.h \
cf-https-connect.h \
cf-socket.h \
cfilters.h \
conncache.h \
connect.h \
content_encoding.h \
cookie.h \
curl_addrinfo.h \
curl_base64.h \
curl_ctype.h \
curl_des.h \
curl_endian.h \
curl_fnmatch.h \
curl_get_line.h \
curl_gethostname.h \
curl_gssapi.h \
curl_hmac.h \
curl_krb5.h \
curl_ldap.h \
curl_md4.h \
curl_md5.h \
curl_memory.h \
curl_memrchr.h \
curl_multibyte.h \
curl_ntlm_core.h \
curl_ntlm_wb.h \
curl_path.h \
curl_printf.h \
curl_range.h \
curl_rtmp.h \
curl_sasl.h \
curl_setup.h \
curl_setup_once.h \
curl_sha256.h \
curl_sspi.h \
curl_threads.h \
curl_trc.h \
curlx.h \
dict.h \
doh.h \
dynbuf.h \
dynhds.h \
easy_lock.h \
easyif.h \
easyoptions.h \
escape.h \
file.h \
fileinfo.h \
fopen.h \
formdata.h \
ftp.h \
ftplistparser.h \
functypes.h \
getinfo.h \
gopher.h \
hash.h \
headers.h \
hostip.h \
hsts.h \
http.h \
http1.h \
http2.h \
http_aws_sigv4.h \
http_chunks.h \
http_digest.h \
http_negotiate.h \
http_ntlm.h \
http_proxy.h \
idn.h \
if2ip.h \
imap.h \
inet_ntop.h \
inet_pton.h \
llist.h \
macos.h \
memdebug.h \
mime.h \
mqtt.h \
multihandle.h \
multiif.h \
netrc.h \
nonblock.h \
noproxy.h \
parsedate.h \
pingpong.h \
pop3.h \
progress.h \
psl.h \
rand.h \
rename.h \
rtsp.h \
select.h \
sendf.h \
setopt.h \
setup-vms.h \
share.h \
sigpipe.h \
slist.h \
smb.h \
smtp.h \
sockaddr.h \
socketpair.h \
socks.h \
speedcheck.h \
splay.h \
strcase.h \
strdup.h \
strerror.h \
strtok.h \
strtoofft.h \
system_win32.h \
telnet.h \
tftp.h \
timediff.h \
timeval.h \
transfer.h \
url.h \
urlapi-int.h \
urldata.h \
version_win32.h \
warnless.h \
ws.h
LIB_RCFILES = libcurl.rc
CSOURCES = $(LIB_CFILES) $(LIB_VAUTH_CFILES) $(LIB_VTLS_CFILES) \
$(LIB_VQUIC_CFILES) $(LIB_VSSH_CFILES)
HHEADERS = $(LIB_HFILES) $(LIB_VAUTH_HFILES) $(LIB_VTLS_HFILES) \
$(LIB_VQUIC_HFILES) $(LIB_VSSH_HFILES)
# libcurl sources to include in curltool lib we use for test binaries
CURLTOOL_LIBCURL_CFILES = \
../lib/base64.c \
../lib/dynbuf.c
# libcurl has sources that provide functions named curlx_* that aren't part of
# the official API, but we reuse the code here to avoid duplication.
CURLX_CFILES = \
../lib/base64.c \
../lib/curl_multibyte.c \
../lib/dynbuf.c \
../lib/nonblock.c \
../lib/strtoofft.c \
../lib/timediff.c \
../lib/version_win32.c \
../lib/warnless.c
CURLX_HFILES = \
../lib/curl_ctype.h \
../lib/curl_multibyte.h \
../lib/curl_setup.h \
../lib/dynbuf.h \
../lib/nonblock.h \
../lib/strtoofft.h \
../lib/timediff.h \
../lib/version_win32.h \
../lib/warnless.h
CURL_CFILES = \
slist_wc.c \
tool_binmode.c \
tool_bname.c \
tool_cb_dbg.c \
tool_cb_hdr.c \
tool_cb_prg.c \
tool_cb_rea.c \
tool_cb_see.c \
tool_cb_wrt.c \
tool_cfgable.c \
tool_dirhie.c \
tool_doswin.c \
tool_easysrc.c \
tool_filetime.c \
tool_findfile.c \
tool_formparse.c \
tool_getparam.c \
tool_getpass.c \
tool_help.c \
tool_helpers.c \
tool_hugehelp.c \
tool_ipfs.c \
tool_libinfo.c \
tool_listhelp.c \
tool_main.c \
tool_msgs.c \
tool_operate.c \
tool_operhlp.c \
tool_paramhlp.c \
tool_parsecfg.c \
tool_progress.c \
tool_setopt.c \
tool_sleep.c \
tool_stderr.c \
tool_strdup.c \
tool_urlglob.c \
tool_util.c \
tool_vms.c \
tool_writeout.c \
tool_writeout_json.c \
tool_xattr.c \
var.c
CURL_HFILES = \
slist_wc.h \
tool_binmode.h \
tool_bname.h \
tool_cb_dbg.h \
tool_cb_hdr.h \
tool_cb_prg.h \
tool_cb_rea.h \
tool_cb_see.h \
tool_cb_wrt.h \
tool_cfgable.h \
tool_dirhie.h \
tool_doswin.h \
tool_easysrc.h \
tool_filetime.h \
tool_findfile.h \
tool_formparse.h \
tool_getparam.h \
tool_getpass.h \
tool_help.h \
tool_helpers.h \
tool_hugehelp.h \
tool_ipfs.h \
tool_libinfo.h \
tool_main.h \
tool_msgs.h \
tool_operate.h \
tool_operhlp.h \
tool_paramhlp.h \
tool_parsecfg.h \
tool_progress.h \
tool_sdecls.h \
tool_setopt.h \
tool_setup.h \
tool_sleep.h \
tool_stderr.h \
tool_strdup.h \
tool_urlglob.h \
tool_util.h \
tool_version.h \
tool_vms.h \
tool_writeout.h \
tool_writeout_json.h \
tool_xattr.h \
var.h
CURL_RCFILES = curl.rc
# curl_SOURCES is special and gets assigned in src/Makefile.am
CURL_FILES = $(CURL_CFILES) $(CURLX_CFILES) $(CURL_HFILES)
all: all-recursive
.SUFFIXES:
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
esac;
$(srcdir)/lib/Makefile.inc $(srcdir)/src/Makefile.inc $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in
cd $(top_builddir) && $(SHELL) ./config.status $@
libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
install-binSCRIPTS: $(bin_SCRIPTS)
@$(NORMAL_INSTALL)
@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
$(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n' \
-e 'h;s|.*|.|' \
-e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) { files[d] = files[d] " " $$1; \
if (++n[d] == $(am__install_max)) { \
print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
else { print "f", d "/" $$4, $$1 } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
$(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
} \
; done
uninstall-binSCRIPTS:
@$(NORMAL_UNINSTALL)
@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 's,.*/,,;$(transform)'`; \
dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
install-pkgconfigDATA: $(pkgconfig_DATA)
@$(NORMAL_INSTALL)
@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
$(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
done
uninstall-pkgconfigDATA:
@$(NORMAL_UNINSTALL)
@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
$(am__make_dryrun) \
|| test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
$(am__post_remove_distdir)
dist-lzip: distdir
tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
$(am__post_remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
$(am__post_remove_distdir)
dist-zstd: distdir
tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
$(am__post_remove_distdir)
dist-tarZ: distdir
@echo WARNING: "Support for distribution archives compressed with" \
"legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
@echo WARNING: "Support for shar distribution archives is" \
"deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__post_remove_distdir)
dist dist-all:
$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
$(am__post_remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
*.tar.zst*) \
zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build/sub \
&& ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
--srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__post_remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@test -n '$(distuninstallcheck_dir)' || { \
echo 'ERROR: trying to run $@ with an empty' \
'$$(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
$(am__cd) '$(distuninstallcheck_dir)' || { \
echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
exit 1; \
}; \
test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-pkgconfigDATA
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am: install-binSCRIPTS
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
.MAKE: $(am__recursive_targets) install-am install-data-am \
install-strip uninstall-am
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-am clean clean-cscope clean-generic \
clean-libtool cscope cscopelist-am ctags ctags-am dist \
dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
distclean-generic distclean-libtool distclean-tags \
distcleancheck distdir distuninstallcheck dvi dvi-am html \
html-am info info-am install install-am install-binSCRIPTS \
install-data install-data-am install-data-hook install-dvi \
install-dvi-am install-exec install-exec-am install-html \
install-html-am install-info install-info-am install-man \
install-pdf install-pdf-am install-pkgconfigDATA install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-binSCRIPTS uninstall-hook \
uninstall-pkgconfigDATA
.PRECIOUS: Makefile
# List of files required to generate VC IDE .dsp, .vcproj and .vcxproj files
dist-hook:
rm -rf $(top_builddir)/tests/log
find $(distdir) -name "*.dist" -exec rm {} \;
(distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \
for file in $$distit; do \
strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \
cp -p $$file $(distdir)$$strip; \
done)
check: test examples check-docs
@CROSSCOMPILING_TRUE@test-full: test
@CROSSCOMPILING_TRUE@test-torture: test
@CROSSCOMPILING_TRUE@test:
@CROSSCOMPILING_TRUE@ @echo "NOTICE: we can't run the tests when cross-compiling!"
@CROSSCOMPILING_FALSE@test:
@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all quiet-test)
@CROSSCOMPILING_FALSE@test-full:
@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all full-test)
@CROSSCOMPILING_FALSE@test-nonflaky:
@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all nonflaky-test)
@CROSSCOMPILING_FALSE@test-torture:
@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all torture-test)
@CROSSCOMPILING_FALSE@test-event:
@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all event-test)
@CROSSCOMPILING_FALSE@test-am:
@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all am-test)
@CROSSCOMPILING_FALSE@test-ci:
@CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all ci-test)
examples:
@(cd docs/examples; $(MAKE) check)
check-docs:
@(cd docs/libcurl; $(MAKE) check)
# Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros
# must contain the following line:
# %_topdir /home/loic/local/rpm
# and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc.
#
# cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS
#
# If additional configure flags are needed to build the package, add the
# following in ~/.rpmmacros
# %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS}
# and run make rpm in the following way:
# AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm
#
rpms:
$(MAKE) RPMDIST=curl rpm
$(MAKE) RPMDIST=curl-ssl rpm
rpm:
RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \
cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \
cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \
rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \
mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \
mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm .
#
# Build a Solaris pkgadd format file
# run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format
# file (which ends up back in this directory).
# The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do
# pkgadd -d ./HAXXcurl-*
#
# gak - libtool requires an absolute directory, hence the pwd below...
pkgadd:
umask 022 ; \
$(MAKE) install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \
cat COPYING > $(srcdir)/packages/Solaris/copyright ; \
cd $(srcdir)/packages/Solaris && $(MAKE) package
#
# Build a cygwin binary tarball installation file
# resulting .tar.bz2 file will end up at packages/Win32/cygwin
cygwinbin:
$(MAKE) -C packages/Win32/cygwin cygwinbin
# We extend the standard install with a custom hook:
install-data-hook:
(cd include && $(MAKE) install)
(cd docs && $(MAKE) install)
(cd docs/libcurl && $(MAKE) install)
# We extend the standard uninstall with a custom hook:
uninstall-hook:
(cd include && $(MAKE) uninstall)
(cd docs && $(MAKE) uninstall)
(cd docs/libcurl && $(MAKE) uninstall)
ca-bundle: $(srcdir)/scripts/mk-ca-bundle.pl
@echo "generating a fresh ca-bundle.crt"
@perl $(srcdir)/scripts/mk-ca-bundle.pl -b -l -u lib/ca-bundle.crt
ca-firefox: $(srcdir)/scripts/firefox-db2pem.sh
@echo "generating a fresh ca-bundle.crt"
$(srcdir)/scripts/firefox-db2pem.sh lib/ca-bundle.crt
checksrc:
(cd lib && $(MAKE) checksrc)
(cd src && $(MAKE) checksrc)
(cd tests && $(MAKE) checksrc)
(cd include/curl && $(MAKE) checksrc)
(cd docs/examples && $(MAKE) checksrc)
(cd packages && $(MAKE) checksrc)
.PHONY: vc-ide
vc-ide: $(VC14_LIBVCXPROJ_DEPS) $(VC14_SRCVCXPROJ_DEPS) \
$(VC14_10_LIBVCXPROJ_DEPS) $(VC14_10_SRCVCXPROJ_DEPS) \
$(VC14_20_LIBVCXPROJ_DEPS) $(VC14_20_SRCVCXPROJ_DEPS) \
$(VC14_30_LIBVCXPROJ_DEPS) $(VC14_30_SRCVCXPROJ_DEPS)
@(win32_lib_srcs='$(LIB_CFILES)'; \
win32_lib_hdrs='$(LIB_HFILES) config-win32.h'; \
win32_lib_rc='$(LIB_RCFILES)'; \
win32_lib_vauth_srcs='$(LIB_VAUTH_CFILES)'; \
win32_lib_vauth_hdrs='$(LIB_VAUTH_HFILES)'; \
win32_lib_vquic_srcs='$(LIB_VQUIC_CFILES)'; \
win32_lib_vquic_hdrs='$(LIB_VQUIC_HFILES)'; \
win32_lib_vssh_srcs='$(LIB_VSSH_CFILES)'; \
win32_lib_vssh_hdrs='$(LIB_VSSH_HFILES)'; \
win32_lib_vtls_srcs='$(LIB_VTLS_CFILES)'; \
win32_lib_vtls_hdrs='$(LIB_VTLS_HFILES)'; \
win32_src_srcs='$(CURL_CFILES)'; \
win32_src_hdrs='$(CURL_HFILES)'; \
win32_src_rc='$(CURL_RCFILES)'; \
win32_src_x_srcs='$(CURLX_CFILES)'; \
win32_src_x_hdrs='$(CURLX_HFILES) ../lib/config-win32.h'; \
\
sorted_lib_srcs=`for file in $$win32_lib_srcs; do echo $$file; done | sort`; \
sorted_lib_hdrs=`for file in $$win32_lib_hdrs; do echo $$file; done | sort`; \
sorted_lib_vauth_srcs=`for file in $$win32_lib_vauth_srcs; do echo $$file; done | sort`; \
sorted_lib_vauth_hdrs=`for file in $$win32_lib_vauth_hdrs; do echo $$file; done | sort`; \
sorted_lib_vquic_srcs=`for file in $$win32_lib_vquic_srcs; do echo $$file; done | sort`; \
sorted_lib_vquic_hdrs=`for file in $$win32_lib_vquic_hdrs; do echo $$file; done | sort`; \
sorted_lib_vssh_srcs=`for file in $$win32_lib_vssh_srcs; do echo $$file; done | sort`; \
sorted_lib_vssh_hdrs=`for file in $$win32_lib_vssh_hdrs; do echo $$file; done | sort`; \
sorted_lib_vtls_srcs=`for file in $$win32_lib_vtls_srcs; do echo $$file; done | sort`; \
sorted_lib_vtls_hdrs=`for file in $$win32_lib_vtls_hdrs; do echo $$file; done | sort`; \
sorted_src_srcs=`for file in $$win32_src_srcs; do echo $$file; done | sort`; \
sorted_src_hdrs=`for file in $$win32_src_hdrs; do echo $$file; done | sort`; \
sorted_src_x_srcs=`for file in $$win32_src_x_srcs; do echo $$file; done | sort`; \
sorted_src_x_hdrs=`for file in $$win32_src_x_hdrs; do echo $$file; done | sort`; \
\
awk_code='\
function gen_element(type, dir, file)\
{\
sub(/vauth\//, "", file);\
sub(/vquic\//, "", file);\
sub(/vssh\//, "", file);\
sub(/vtls\//, "", file);\
\
spaces=" ";\
if(dir == "lib\\vauth" ||\
dir == "lib\\vquic" ||\
dir == "lib\\vssh" ||\
dir == "lib\\vtls")\
tabs=" ";\
else\
tabs=" ";\
\
if(type == "dsp") {\
printf("# Begin Source File\r\n");\
printf("\r\n");\
printf("SOURCE=..\\..\\..\\..\\%s\\%s\r\n", dir, file);\
printf("# End Source File\r\n");\
}\
else if(type == "vcproj1") {\
printf("%s<File\r\n", tabs);\
printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\">\r\n",\
tabs, dir, file);\
printf("%s</File>\r\n", tabs);\
}\
else if(type == "vcproj2") {\
printf("%s<File\r\n", tabs);\
printf("%s RelativePath=\"..\\..\\..\\..\\%s\\%s\"\r\n",\
tabs, dir, file);\
printf("%s>\r\n", tabs);\
printf("%s</File>\r\n", tabs);\
}\
else if(type == "vcxproj") {\
i = index(file, ".");\
ext = substr(file, i == 0 ? 0 : i + 1);\
\
if(ext == "c")\
printf("%s<ClCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
spaces, dir, file);\
else if(ext == "h")\
printf("%s<ClInclude Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
spaces, dir, file);\
else if(ext == "rc")\
printf("%s<ResourceCompile Include=\"..\\..\\..\\..\\%s\\%s\" />\r\n",\
spaces, dir, file);\
}\
}\
\
{\
\
if($$0 == "CURL_LIB_C_FILES") {\
split(lib_srcs, arr);\
for(val in arr) gen_element(proj_type, "lib", arr[val]);\
}\
else if($$0 == "CURL_LIB_H_FILES") {\
split(lib_hdrs, arr);\
for(val in arr) gen_element(proj_type, "lib", arr[val]);\
}\
else if($$0 == "CURL_LIB_RC_FILES") {\
split(lib_rc, arr);\
for(val in arr) gen_element(proj_type, "lib", arr[val]);\
}\
else if($$0 == "CURL_LIB_VAUTH_C_FILES") {\
split(lib_vauth_srcs, arr);\
for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\
}\
else if($$0 == "CURL_LIB_VAUTH_H_FILES") {\
split(lib_vauth_hdrs, arr);\
for(val in arr) gen_element(proj_type, "lib\\vauth", arr[val]);\
}\
else if($$0 == "CURL_LIB_VQUIC_C_FILES") {\
split(lib_vquic_srcs, arr);\
for(val in arr) gen_element(proj_type, "lib\\vquic", arr[val]);\
}\
else if($$0 == "CURL_LIB_VQUIC_H_FILES") {\
split(lib_vquic_hdrs, arr);\
for(val in arr) gen_element(proj_type, "lib\\vquic", arr[val]);\
}\
else if($$0 == "CURL_LIB_VSSH_C_FILES") {\
split(lib_vssh_srcs, arr);\
for(val in arr) gen_element(proj_type, "lib\\vssh", arr[val]);\
}\
else if($$0 == "CURL_LIB_VSSH_H_FILES") {\
split(lib_vssh_hdrs, arr);\
for(val in arr) gen_element(proj_type, "lib\\vssh", arr[val]);\
}\
else if($$0 == "CURL_LIB_VTLS_C_FILES") {\
split(lib_vtls_srcs, arr);\
for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
}\
else if($$0 == "CURL_LIB_VTLS_H_FILES") {\
split(lib_vtls_hdrs, arr);\
for(val in arr) gen_element(proj_type, "lib\\vtls", arr[val]);\
}\
else if($$0 == "CURL_SRC_C_FILES") {\
split(src_srcs, arr);\
for(val in arr) gen_element(proj_type, "src", arr[val]);\
}\
else if($$0 == "CURL_SRC_H_FILES") {\
split(src_hdrs, arr);\
for(val in arr) gen_element(proj_type, "src", arr[val]);\
}\
else if($$0 == "CURL_SRC_RC_FILES") {\
split(src_rc, arr);\
for(val in arr) gen_element(proj_type, "src", arr[val]);\
}\
else if($$0 == "CURL_SRC_X_C_FILES") {\
split(src_x_srcs, arr);\
for(val in arr) {\
sub(/..\/lib\//, "", arr[val]);\
gen_element(proj_type, "lib", arr[val]);\
}\
}\
else if($$0 == "CURL_SRC_X_H_FILES") {\
split(src_x_hdrs, arr);\
for(val in arr) {\
sub(/..\/lib\//, "", arr[val]);\
gen_element(proj_type, "lib", arr[val]);\
}\
}\
else\
printf("%s\r\n", $$0);\
}';\
\
echo "generating '$(VC14_LIBVCXPROJ)'"; \
awk -v proj_type=vcxproj \
-v lib_srcs="$$sorted_lib_srcs" \
-v lib_hdrs="$$sorted_lib_hdrs" \
-v lib_rc="$$win32_lib_rc" \
-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
-v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \
-v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \
-v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \
-v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \
-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
"$$awk_code" $(srcdir)/$(VC14_LIBTMPL) > $(VC14_LIBVCXPROJ) || { exit 1; }; \
\
echo "generating '$(VC14_SRCVCXPROJ)'"; \
awk -v proj_type=vcxproj \
-v src_srcs="$$sorted_src_srcs" \
-v src_hdrs="$$sorted_src_hdrs" \
-v src_rc="$$win32_src_rc" \
-v src_x_srcs="$$sorted_src_x_srcs" \
-v src_x_hdrs="$$sorted_src_x_hdrs" \
"$$awk_code" $(srcdir)/$(VC14_SRCTMPL) > $(VC14_SRCVCXPROJ) || { exit 1; }; \
\
echo "generating '$(VC14_10_LIBVCXPROJ)'"; \
awk -v proj_type=vcxproj \
-v lib_srcs="$$sorted_lib_srcs" \
-v lib_hdrs="$$sorted_lib_hdrs" \
-v lib_rc="$$win32_lib_rc" \
-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
-v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \
-v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \
-v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \
-v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \
-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
"$$awk_code" $(srcdir)/$(VC14_10_LIBTMPL) > $(VC14_10_LIBVCXPROJ) || { exit 1; }; \
\
echo "generating '$(VC14_10_SRCVCXPROJ)'"; \
awk -v proj_type=vcxproj \
-v src_srcs="$$sorted_src_srcs" \
-v src_hdrs="$$sorted_src_hdrs" \
-v src_rc="$$win32_src_rc" \
-v src_x_srcs="$$sorted_src_x_srcs" \
-v src_x_hdrs="$$sorted_src_x_hdrs" \
"$$awk_code" $(srcdir)/$(VC14_10_SRCTMPL) > $(VC14_10_SRCVCXPROJ) || { exit 1; }; \
\
echo "generating '$(VC14_20_LIBVCXPROJ)'"; \
awk -v proj_type=vcxproj \
-v lib_srcs="$$sorted_lib_srcs" \
-v lib_hdrs="$$sorted_lib_hdrs" \
-v lib_rc="$$win32_lib_rc" \
-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
-v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \
-v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \
-v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \
-v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \
-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
"$$awk_code" $(srcdir)/$(VC14_20_LIBTMPL) > $(VC14_20_LIBVCXPROJ) || { exit 1; }; \
\
echo "generating '$(VC14_20_SRCVCXPROJ)'"; \
awk -v proj_type=vcxproj \
-v src_srcs="$$sorted_src_srcs" \
-v src_hdrs="$$sorted_src_hdrs" \
-v src_rc="$$win32_src_rc" \
-v src_x_srcs="$$sorted_src_x_srcs" \
-v src_x_hdrs="$$sorted_src_x_hdrs" \
"$$awk_code" $(srcdir)/$(VC14_20_SRCTMPL) > $(VC14_20_SRCVCXPROJ) || { exit 1; }; \
\
echo "generating '$(VC14_30_LIBVCXPROJ)'"; \
awk -v proj_type=vcxproj \
-v lib_srcs="$$sorted_lib_srcs" \
-v lib_hdrs="$$sorted_lib_hdrs" \
-v lib_rc="$$win32_lib_rc" \
-v lib_vauth_srcs="$$sorted_lib_vauth_srcs" \
-v lib_vauth_hdrs="$$sorted_lib_vauth_hdrs" \
-v lib_vquic_srcs="$$sorted_lib_vquic_srcs" \
-v lib_vquic_hdrs="$$sorted_lib_vquic_hdrs" \
-v lib_vssh_srcs="$$sorted_lib_vssh_srcs" \
-v lib_vssh_hdrs="$$sorted_lib_vssh_hdrs" \
-v lib_vtls_srcs="$$sorted_lib_vtls_srcs" \
-v lib_vtls_hdrs="$$sorted_lib_vtls_hdrs" \
"$$awk_code" $(srcdir)/$(VC14_30_LIBTMPL) > $(VC14_30_LIBVCXPROJ) || { exit 1; }; \
\
echo "generating '$(VC14_30_SRCVCXPROJ)'"; \
awk -v proj_type=vcxproj \
-v src_srcs="$$sorted_src_srcs" \
-v src_hdrs="$$sorted_src_hdrs" \
-v src_rc="$$win32_src_rc" \
-v src_x_srcs="$$sorted_src_x_srcs" \
-v src_x_hdrs="$$sorted_src_x_hdrs" \
"$$awk_code" $(srcdir)/$(VC14_30_SRCTMPL) > $(VC14_30_SRCVCXPROJ) || { exit 1; };)
tidy:
(cd src && $(MAKE) tidy)
(cd lib && $(MAKE) tidy)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
此处可能存在不合适展示的内容，页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容，可点击提交进行申诉，我们将尽快为您处理。
马建仓 AI 助手