# none hdf driver configs
choice
    prompt "Enable Uart"
    default DRIVERS_HDF_PLATFORM_UART
    help
      Enable simple uart (without vfs) only for litekernel.
      Enable general uart (with vfs) for full code.

config DRIVERS_HDF_PLATFORM_UART
    bool "Enable HDF platform uart driver"
    depends on DRIVERS_HDF_PLATFORM
    help
      Answer Y to enable HDF platform uart driver.

config PLATFORM_UART_WITHOUT_VFS
    bool "Simple Uart"
config PLATFORM_NO_UART
    bool "NO Uart"
endchoice

config DRIVERS_HIEDMAC
    bool "Enable HIEDMAC"
    default n
    depends on DRIVERS && PLATFORM_HI3559AV100
    help
      Answer Y to enable LiteOS support hiedmac.

config DRIVERS_NETDEV
    bool "Enable Net Device"
    default y
    depends on DRIVERS && NET_LWIP_SACK
    help
      Answer Y to enable LiteOS support net device.

choice
    depends on DRIVERS_NETDEV
    prompt "MAC"
    default DRIVERS_HIETH_SF
    help
      Enable higmac for hi3516a hi3519 hi3559a_cortex-a53_aarch64.
      Enable hieth-sf for hi3516cv300 hi3516ev200 and hi3518ev200.

config DRIVERS_HIETH_SF
    bool "Enable hieth-sf"
    depends on DRIVERS_NETDEV && (PLATFORM_HI3518EV200 || PLATFORM_HI3731 || PLATFORM_HI3516CV300 || PLATFORM_HI3516CV500 || PLATFORM_HI3516DV300 || PLATFORM_HI3516EV200 || PLATFORM_HI3516EV300 || PLATFORM_HI3559V200 || PLATFORM_HI3516DV300 || PLATFORM_HI3518EV300)
endchoice

# mmc config start
config DRIVERS_MMC
    depends on DRIVERS
    bool "Enable MMC"
    default y
    depends on DRIVERS && FS_VFS
    help
      Answer Y to enable LiteOS support MMC driver.

config DRIVERS_SD_DETECT_BY_SW
    depends on DRIVERS_MMC && (PLATFORM_HI3516EV200 || PLATFORM_HI3518EV300)
    bool "Use software detection instead of hardware interrupt"
    default n
    help
      Answer Y to enable software detection for the MMC/SD card.
      if you choose Y, host driver will disable the insert/remove interrupt and use the sd protocol to detect the card.

config DRIVERS_SD
    depends on DRIVERS_MMC && (PLATFORM_HI3518EV200 || PLATFORM_HI3516EV200 || PLATFORM_HI3516EV300 || PLATFORM_HI3518EV300 || PLATFORM_HI3516DV300)
    bool "Enable MMC0 support SD card type"

config DRIVERS_EMMC
    depends on DRIVERS_MMC && (PLATFORM_HI3518EV200 || PLATFORM_HI3516EV200 || PLATFORM_HI3516EV300 || PLATFORM_HI3518EV300 || PLATFORM_HI3516DV300 || PLATFORM_HI3556V200)
    bool "Enable MMC0 support eMMC type"

choice
    depends on DRIVERS_EMMC && DRIVERS_MMC && FS_VFS
    prompt "EMMC chip mode"
    default DRIVERS_EMMC_HS200
    help
      select EMMC chip mode hs200.
      select EMMC chip mode hs400.

config DRIVERS_EMMC_HS200
    depends on DRIVERS_EMMC
    bool "Enable EMMC HS200 support"
    help
       If you connect the SDIO0 to EMMC chip, figure out which mode of chip and select the mode HS200

config DRIVERS_EMMC_HS400
    depends on DRIVERS_EMMC && (PLATFORM_HI3518EV200 || PLATFORM_HI3516EV300)
    bool "Enable EMMC HS400 support"
    help
       If you connect the SDIO0 to EMMC chip figure out which mode of chip and select the mode HS400

endchoice

config DRIVERS_MMC_SPEEDUP
    depends on DRIVERS_MMC && (PLATFORM_HI3519 || PLATFORM_HI3519V101 || PLATFORM_HI3559)
    bool "Enable MMC support speedup"
    default n
    help
      Answer Y to enable LiteOS support speedup.
# mmc config end

# mtd configs tart
config DRIVERS_MTD
    bool "Enable MTD"
    default y
    depends on DRIVERS && FS_VFS
    help
      Answer Y to enable LiteOS support jffs2 multipartion.

# spi nor
config DRIVERS_MTD_SPI_NOR
    bool "Enable MTD spi_nor flash"
    default y
    depends on DRIVERS_MTD
    help
      Answer Y to support spi_nor flash.
choice
    depends on  DRIVERS_MTD_SPI_NOR
    prompt "SpiNorFlash Chips"
    default DRIVERS_MTD_SPI_NOR_HISFC350

config DRIVERS_MTD_SPI_NOR_HISFC350
    depends on PLATFORM_HI3516A || PLATFORM_HI3731
    bool "Enable hisfc350"
    help
      Answer Y to support hisfc350.

config DRIVERS_MTD_SPI_NOR_HIFMC100
    depends on PLATFORM_HI3518EV200 || PLATFORM_HI3519 || PLATFORM_HI3519V101 || PLATFORM_HI3559  || PLATFORM_HI3516CV300 || PLATFORM_HI3559AV100ES || PLATFORM_HI3559AV100 || PLATFORM_HI3516CV500 || PLATFORM_HI3516DV300 || PLATFORM_HI3516EV200 || PLATFORM_HI3516EV300 || PLATFORM_HI3518EV300 || PLATFORM_HI3556V200 || PLATFORM_HI3559V200
    bool "Enable hifmc100"
    help
      Answer Y to support hifmc100.
endchoice

#spi nand
config DRIVERS_MTD_NAND
    bool "Enable MTD nandflash"
    default n
    depends on DRIVERS_MTD
    help
      Answer Y to support nandflash.

choice
    depends    on DRIVERS_MTD_NAND
    prompt "NandFlash Chips"
    default DRIVERS_MTD_NAND_HINFC620

config DRIVERS_MTD_NAND_HINFC620
    depends on PLATFORM_HI3516A
    bool "Enable hinfc620 for parallel nand"
    help
      Answer Y to support hinfc620.

config DRIVERS_MTD_NAND_HISNFC100
    depends on PLATFORM_HI3516A
    bool "Enable hisnfc100 for spi nand"
    help
      Answer Y to support hisnfc100.

config DRIVERS_MTD_NAND_HIFMC100
    depends on PLATFORM_HI3518EV200 || PLATFORM_HI3519 || PLATFORM_HI3519V101 || PLATFORM_HI3559 || PLATFORM_HI3516CV300 || PLATFORM_HI3559AV100ES || PLATFORM_HI3516EV200 || PLATFORM_HI3516EV300 || PLATFORM_HI3518EV300 || PLATFORM_HI3559V200 || PLATFORM_HI3556V200 || PLATFORM_HI3516DV300 || PLATFORM_HI3516CV500
    bool "Enable hifmc100 for spi nand"
    help
      Answer Y to support hifmc100.

config DRIVERS_MTD_NAND_HIFMC100_PARALLEL
    depends on PLATFORM_HI3519 || PLATFORM_HI3519V101 || PLATFORM_HI3559 || PLATFORM_HI3559AV100ES
    bool "Enable hifmc100 for parallel nand"
    help
      Answer Y to support hifmc100.
endchoice
# mtd configs end

config DRIVERS_HI3881
    bool "Enable Hi3881 Host driver"
    default n
    depends on DRIVERS_HDF_WIFI
    help
      Answer Y to enable Hi3881 Host driver.