@echo off

rem Copyright 2021 Huawei Technologies Co., Ltd
rem
rem Licensed under the Apache License, Version 2.0 (the "License");
rem you may not use this file except in compliance with the License.
rem You may obtain a copy of the License at
rem
rem http://www.apache.org/licenses/LICENSE-2.0
rem
rem Unless required by applicable law or agreed to in writing, software
rem distributed under the License is distributed on an "AS IS" BASIS,
rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rem See the License for the specific language governing permissions and
rem limitations under the License.

setlocal ENABLEDELAYEDEXPANSION ENABLEEXTENSIONS

set BASEPATH=%~dp0
set ROOTDIR=%BASEPATH%
set SCRIPTDIR=%BASEPATH%\scripts\build
set PROGRAM=%~nx0

set _IS_MINDSPORE_CI=0
if "%CI%" == "" goto :DONE_CI
if /I "%CI%" == "true" goto :CI_TRUE
if %CI% == 1 goto :CI_TRUE
goto :DONE_CI

:CI_TRUE

if NOT %JENKINS_URL% == "" (
   echo %JENKINS_URL% | findstr /r "^https*://build.mindspore.cn">nul 2>&1
   if %errorlevel% == 0 set _IS_MINDSPORE_CI=1
)

:DONE_CI

rem ============================================================================
rem Default values

set configure_only=0
set do_clean=0
set do_clean_build_dir=0
set do_clean_cache=0
set do_docs=0
set do_install=0
set prefix=

call %SCRIPTDIR%\default_values.bat

rem ============================================================================

:initial
  set result=false
  if "%1" == "" goto :done_parsing

  if /I "%1" == "/h" set result=true
  if /I "%1" == "/Help" set result=true
  if "%result%" == "true" (
    call :help_message
    goto :END
  )

  if /I "%1" == "/N" (
    set dry_run=1
    shift & goto :initial
  )

  if /I "%1" == "/analyzer" (
    set enable_analyzer=1
    shift & goto :initial
  )

  if /I "%1" == "/B" set result=true
  if /I "%1" == "/Build" set result=true
  if "%result%" == "true" (
    set value=%2
    if not defined value goto :arg_build
    if "!value:~0,1!" == "/" (
      :arg_build
      echo %PROGRAM%: option requires an argument -- '/B,/Build'
      goto :END
    )
    set build_dir=!value!
    shift & shift & goto :initial
  )

  if /I "%1" == "/Clean" (
    set do_clean=1
    shift & goto :initial
  )
  if /I "%1" == "/Clean3rdParty" (
    set do_clean_3rdparty=1
    shift & goto :initial
  )
  if /I "%1" == "/CleanAll" (
    set do_clean_venv=1
    set do_clean_build_dir=1
    shift & goto :initial
  )
  if /I "%1" == "/CleanCache" (
    set do_clean_cache=1
    shift & goto :initial
  )
  if /I "%1" == "/CleanVenv" (
    set do_clean_venv=1
    shift & goto :initial
  )

  if /I "%1" == "/C" set result=true
  if /I "%1" == "/Configure" set result=true
  if "%result%" == "true" (
    set do_configure=1
    shift & goto :initial
  )
  if /I "%1" == "/ConfigureOnly" (
    set configure_only=1
    shift & goto :initial
  )

  if /I "%1" == "/CudaArch" (
    set value=%2
    if not defined value goto :arg_cuda_arch
    if "!value:~0,1!" == "/" (
      :arg_cuda_arch
      echo %PROGRAM%: option requires an argument -- '/CudaArch'
      goto :END
    )
    call :ToCMakeList value
    set cuda_arch=!value!
    shift & shift & goto :initial
  )

  if /I "%1" == "/Debug" (
    set build_type=Debug
    shift & goto :initial
  )

  if /I "%1" == "/DebugCMake" (
    set cmake_debug_mode=1
    shift & goto :initial
  )

  if /I "%1" == "/Doc" set result=true
  if /I "%1" == "/Docs" set result=true
  if "%result%" == "true" (
    set do_docs=1
    shift & goto :initial
  )

  if /I "%1" == "/NoGitee" (
    set enable_gitee=0
    shift & goto :initial
  )

  if /I "%1" == "/Gitee" (
    set enable_gitee=1
    shift & goto :initial
  )

  if /I "%1" == "/Gpu" (
    set enable_gpu=1
    shift & goto :initial
  )

  if /I "%1" == "/Install" (
    set do_install=1
    shift & goto :initial
  )

  if /I "%1" == "/J" set result=true
  if /I "%1" == "/Jobs" set result=true
  if "%result%" == "true" (
    set value=%2
    if not defined value goto :arg_build
    if "!value:~0,1!" == "/" (
      :arg_build
      echo %PROGRAM%: option requires an argument -- '/B,/Build'
      goto :END
    )
    set n_jobs=!value!
    shift & shift & goto :initial
  )

  if /I "%1" == "/LocalPkgs" (
    set force_local_pkgs=1
    shift & goto :initial
  )

  if /I "%1" == "/Logging" (
    set enable_logging=1
    shift & goto :initial
  )

  if /I "%1" == "/LoggingDebug" (
    set enable_logging=1
    set logging_enable_debug=1
    shift & goto :initial
  )

  if /I "%1" == "/LoggingTrace" (
    set enable_logging=1
    set logging_enable_trace=1
    shift & goto :initial
  )

  if /I "%1" == "/Ninja" (
    set ninja=1
    shift & goto :initial
  )

  if /I "%1" == "/OnlyPytest" (
    set install_only_pytest=1
    shift & goto :initial
  )

  if /I "%1" == "/Prefix" (
    set value=%2
    if not defined value goto :arg_prefix
    if "!value:~0,1!" == "/" (
      :arg_prefix
      echo %PROGRAM%: option requires an argument -- '/Prefix'
      goto :END
    )
    set prefix_dir=!value!
    shift & shift & goto :initial
  )

  if /I "%1" == "/Quiet" (
    set cmake_make_silent=1
    shift & goto :initial
  )

  if /I "%1" == "/ShowLibraries" (
    call :print_show_libraries
    goto :END
  )

  if /I "%1" == "/Test" (
    set enable_tests=1
    shift & goto :initial
  )

  if /I "%1" == "/UpdateVenv" (
    set do_update_venv=1
    shift & goto :initial
  )

  if /I "%1" == "/Venv" (
    set value=%2
    if not defined value goto :arg_venv
    if "!value:~0,1!" == "/" (
      :arg_venv
      echo %PROGRAM%: option requires an argument -- '/Venv'
      goto :END
    )
    set python_venv_path=!value!
    shift & shift & goto :initial
  )

  set value=%1
  set with_header=!value:~0,5!
  if /I "!with_header!" == "/with" (
    set library=!value:~5!
    call :LoCase library
    if not defined local_pkgs (
      set local_pkgs=!library!
    ) else (
      set local_pkgs=!local_pkgs!,!library!
    )
    shift & goto :initial
  )

  set unparsed_args=!unparsed_args! %1
  shift & goto :initial

:done_parsing

rem ============================================================================
rem Locate python or python3
call %SCRIPTDIR%\locate_python3.bat
if %ERRORLEVEL% NEQ 0 exit /B %ERRORLEVEL%

rem ============================================================================

cd %ROOTDIR%

rem ----------------------------------------------------------------------------

if !do_clean_build_dir! == 1 (
  echo Deleting build folder: !build_dir!
  if exist !build_dir! call :call_cmd rd /Q /S !build_dir!
)

rem NB: `created_venv` variable can be used to detect if a virtualenv was created or not
call %SCRIPTDIR%\python_virtualenv_activate.bat
if %ERRORLEVEL% NEQ 0 exit /B %ERRORLEVEL%

if NOT !dry_run! == 1 (
   rem Make sure the root directory is in the virtualenv PATH
   for /F %%i in ('!PYTHON! -c "import site; print(site.getsitepackages()[0])"') do set site_pkg_dir=%%i
   set pth_file=!site_pkg_dir!\mindquantum_local.pth

   if NOT exist !pth_file! (
      echo Creating pth-file in !pth_file!
      echo %BASEPATH% > !pth_file!
   )
)

rem ------------------------------------------------------------------------------
rem Locate cmake or cmake3

call %SCRIPTDIR%\locate_cmake.bat
if %ERRORLEVEL% NEQ 0 exit /B %ERRORLEVEL%

rem ------------------------------------------------------------------------------
rem Locate ninja if needed

if !ninja! == 1 (
  call %SCRIPTDIR%\locate_ninja.bat
  if %ERRORLEVEL% NEQ 0 exit /B %ERRORLEVEL%
)

rem ------------------------------------------------------------------------------

call %SCRIPTDIR%\python_virtualenv_update.bat
if %ERRORLEVEL% NEQ 0 exit /B %ERRORLEVEL%

rem ----------------------------------------------------------------------------
rem Setup arguments for build

set cmake_args="-DIN_PLACE_BUILD:BOOL=ON -DIS_PYTHON_BUILD:BOOL=OFF -DCMAKE_EXPORT_COMPILE_COMMANDS:BOOL=ON"

set RETVAL=
call %SCRIPTDIR%\dos\build_locally_cmake_option.bat BUILD_TESTING !enable_tests!
call %SCRIPTDIR%\dos\build_locally_cmake_option.bat CLEAN_3RDPARTY_INSTALL_DIR !do_clean_3rdparty!
call %SCRIPTDIR%\dos\build_locally_cmake_option.bat ENABLE_ANALYZER !enable_analyzer!
call %SCRIPTDIR%\dos\build_locally_cmake_option.bat ENABLE_CMAKE_DEBUG !cmake_debug_mode!
call %SCRIPTDIR%\dos\build_locally_cmake_option.bat ENABLE_CUDA !enable_gpu!
call %SCRIPTDIR%\dos\build_locally_cmake_option.bat ENABLE_DOCUMENTATION !do_docs!
call %SCRIPTDIR%\dos\build_locally_cmake_option.bat ENABLE_GITEE !enable_gitee!
call %SCRIPTDIR%\dos\build_locally_cmake_option.bat ENABLE_LOGGING !enable_logging!
call %SCRIPTDIR%\dos\build_locally_cmake_option.bat ENABLE_LOGGING_DEBUG_LEVEL !logging_enable_debug!
call %SCRIPTDIR%\dos\build_locally_cmake_option.bat ENABLE_LOGGING_TRACE_LEVEL !logging_enable_trace!

set cmake_args=!cmake_args! %RETVAL%
set cmake_args=!cmake_args! -DENABLE_BUILD_TYPE:STRING=!build_type!

if !cmake_make_silent! == 1 (
  set cmake_args=!cmake_args! -DUSE_VERBOSE_MAKEFILE:BOOL=OFF
) else (
  set cmake_args=!cmake_args! -DUSE_VERBOSE_MAKEFILE:BOOL=ON
)

if !force_local_pkgs! == 1 (
  set cmake_args=!cmake_args! -DMQ_FORCE_LOCAL_PKGS=all
) else (
  if NOT "!local_pkgs!" == "" set cmake_args=!cmake_args! -DMQ_FORCE_LOCAL_PKGS=!local_pkgs!
)

if NOT "!prefix_dir!" == "" set cmake_args=!cmake_args! -DCMAKE_INSTALL_PREFIX:FILEPATH=!prefix_dir!

if !ninja! == 1 (
  set cmake_args=!cmake_args! -G"Ninja Multi-Config"
) else (
  if !n_jobs! == -1 set n_jobs=!n_jobs_default!
)

set make_args=
if NOT !n_jobs! == -1 (
  set cmake_args=!cmake_args! -DJOBS:STRING=!n_jobs!
  set make_args=!make_args! -j !n_jobs!
)

rem NB: CMake < 3.24 typically set CC, CXX during the first run, which basically overwrites the values in CC, CXX. In
rem     order to work around that, we explicitly set the compilers using the related CMake variables.

if NOT "!CC!" == "" set cmake_args=!cmake_args! -DCMAKE_C_COMPILER:FILEPATH=!CC!
if NOT "!CXX!" == "" set cmake_args=!cmake_args! -DCMAKE_CXX_COMPILER:FILEPATH=!CXX!
if NOT "!CUDACXX!" == "" set cmake_args=!cmake_args! -DCMAKE_CUDA_COMPILER:FILEPATH=!CUDACXX!

rem ----------------------------------------------------------------------------

if !enable_gpu! == 1 (
  if "!CUDA_PATH" == "" (
    if NOT "!CUDA_HOME!" == "" (
       rem Older CMake using find_package(CUDA) would rely on CUDA_HOME, but newer CMake only look at CUDACXX and
       rem CUDA_PATH
       echo CUDA_HOME is defined, but CUDA_PATH is not. Setting CUDA_PATH=CUDA_HOME
       set CUDA_PATH=!CUDA_HOME!
    )
  )
  echo CUDA_HOME = !CUDA_HOME!
  echo CUDA_PATH = !CUDA_PATH!
)

rem ----------------------------------------------------------------------------

set target_args=
if !do_install! == 1 set target_args=!target_args! --target install

if !cmake_make_silent! == 0 set make_args=!make_args! -v

rem ----------------------------------------------------------------------------
rem Build

if NOT exist !build_dir! goto :do_configure
if !do_clean_build_dir! == 1 goto :do_configure

if !do_clean_cache! == 1 (
    echo Removing CMake cache at: !build_dir!\CMakeCache.txt
    if exist !build_dir!\CMakeCache.txt call :call_cmd del /Q "!build_dir!\CMakeCache.txt"
    echo Removing CMake files at: !build_dir!/CMakeFiles
    if exist !build_dir!/CMakeFiles call :call_cmd rd /Q /S "!build_dir!\CMakeFiles"
    echo Removing CMake files at: !build_dir!/cmake-ldtest-C
    if exist !build_dir!/cmake-ldtest-C call :call_cmd rd /Q /S "!build_dir!\cmake-ldtest-C"
    echo Removing CMake files at: !build_dir!/cmake-ldtest-CXX
    if exist !build_dir!/cmake-ldtest-CXX call :call_cmd rd /Q /S "!build_dir!\cmake-ldtest-CXX"
    goto :do_configure
)

if !do_configure! == 1 goto :do_configure

goto :done_configure

:do_configure
call :call_cmake -S !source_dir! -B !build_dir! !cmake_args! !unparsed_args!

:done_configure

if !configure_only! == 1 goto :END

if !do_clean! == 1 call :call_cmake --build "!build_dir!" --target clean

if !do_docs! == 1 call :call_cmake --build "!build_dir!" --config !build_type! --target docs !make_args!

call :call_cmake --build "!build_dir!" --config !build_type! !target_args! !make_args!

if DEFINED cmake_args set cmake_args=
if DEFINED unparsed_args set unparsed_args=
if DEFINED target_args set target_args=
if DEFINED make_args set make_args=

goto :END

rem ============================================================================

:LoCase
rem Subroutine to convert a variable VALUE to all lower case.
rem The argument for this subroutine is the variable NAME.
set %~1=!%~1:A=a!
set %~1=!%~1:B=b!
set %~1=!%~1:C=c!
set %~1=!%~1:D=d!
set %~1=!%~1:E=e!
set %~1=!%~1:F=f!
set %~1=!%~1:G=g!
set %~1=!%~1:H=h!
set %~1=!%~1:I=i!
set %~1=!%~1:J=j!
set %~1=!%~1:K=k!
set %~1=!%~1:L=l!
set %~1=!%~1:M=m!
set %~1=!%~1:N=n!
set %~1=!%~1:O=o!
set %~1=!%~1:P=p!
set %~1=!%~1:Q=q!
set %~1=!%~1:R=r!
set %~1=!%~1:S=s!
set %~1=!%~1:T=t!
set %~1=!%~1:U=u!
set %~1=!%~1:V=v!
set %~1=!%~1:W=w!
set %~1=!%~1:X=x!
set %~1=!%~1:Y=y!
set %~1=!%~1:Z=z!
exit /B 0

:ToCMakeList
set %~1=!%~1: =;!
set %~1=!%~1:,=;!
exit /B 0

:call_cmake
  if NOT !dry_run! == 1 (
    echo **********
    echo Calling CMake with: cmake  %*
    echo **********
    cmake %*
  ) else (
    echo cmake %*
  )
  EXIT /B 0

:print_show_libraries
  echo Known third-party libraries:
  for %%a in (%third_party_libraries%) do (
      echo - %%a
  )
  EXIT /B 0

:help_message
  echo Build MindQunantum locally (in-source build)
  echo:
  echo This is mainly relevant for developers that do not want to always
  echo have to reinstall the Python package
  echo:
  echo This script will create a Python virtualenv in the MindQuantum root
  echo directory and then build all the C++ Python modules and place the
  echo generated libraries in their right locations within the MindQuantum
  echo folder hierarchy so Python knows how to find them.
  echo:
  echo A pth-file will be created in the virtualenv site-packages directory
  echo so that the MindQuantum root folder will be added to the Python PATH
  echo without the need to modify PYTHONPATH.
  echo:
  echo Usage:
  echo   %PROGRAM% [options]
  echo:
  echo Options:
  echo   /H,/Help            Show this help message and exit
  echo   /N                  Dry run; only print commands but do not execute them
  echo   /Analyzer           Use the compiler static analysis tool during compilation (GCC or MSVC)
  echo   /B,/Build [dir]     Specify build directory
  echo                       Defaults to: %build_dir%
  echo   /C,/Clean           Run make clean before building
  echo   /Clean3rdParty      Clean 3rd party installation directory
  echo   /CleanAll           Clean everything before building.
  echo                       Equivalent to /CleanVenv /CleanBuilddir
  echo   /CleanBuildDir      Delete build directory before building
  echo   /CleanCache         Re-run CMake with a clean CMake cache
  echo   /CleanVenv          Delete Python virtualenv before building
  echo   /ConfigureOnly      Stop after the CMake configure and generation steps (ie. before building MindQuantum)
  echo   /Debug              Build in debug mode
  echo   /DebugCMake         Enable debugging mode for CMake configuration step
  echo   /Doc, /Docs         Setup the Python virtualenv for building the documentation and ask CMake to build the
  echo                       documentation
  echo   /Gitee              Use Gitee (where possible) instead of Github/Gitlab
  echo   /Gpu                Enable GPU support
  echo   /Install            Build the 'install' target
  echo   /J,/Jobs [N]        Number of parallel jobs for building
  echo                       Defaults to: !n_jobs_default!
  echo   /LocalPkgs          Compile third-party dependencies locally
  echo   /Logging            Enable logging in C++ code
  echo   /LoggingDebug       Enable DEBUG level logging macros (implies /Logging)
  echo   /LoggingTrace       Enable TRACE level logging macros (implies /Logging /LoggingDebug)'
  echo   /LoggingDebug       Enable DEBUG level logging macros (implies /Logging)
  echo   /LoggingTrace       Enable TRACE level logging macros (implies /Logging /LoggingDebug)'
  echo   /Ninja              Use the Ninja CMake generator
  echo   /NoGitee            Do not favor Gitee over Github/Gitlab
  echo   /Prefix             Specify installation prefix
  echo   /Quiet              Disable verbose build rules
  echo   /ShowLibraries      Show all known third-party libraries
  echo   /Venv *path*        Path to Python virtual environment
  echo                       Defaults to: %python_venv_path%
  echo   /With*library*      Build the third-party *library* from source (*library* is case-insensitive)
  echo                       (ignored if /LocalPkgs is passed)
  rem echo   /Without*library*   Do not build the third-party library from source (*library* is case-insensitive)
  rem echo                       (ignored if /LocalPkgs is passed)
  echo:
  echo Test related options:
  echo   /Test               Build C++ tests and install dependencies for Python testing as well
  echo   /OnlyPytest         Only install pytest and its dependencies when creating/building the virtualenv
  echo:
  echo CUDA related options:
  echo   /CudaArch *arch*    Comma-separated list of architectures to generate device code for.
  echo                       Only useful if /Gpu is passed. See CMAKE_CUDA_ARCHITECTURES for more information.
  echo:
  echo Python related options:
  echo   /UpdateVenv         Update the python virtual environment
  echo:
  echo NB: any unknown arguments will be passed onto the CMake during the configuration step.
  echo:
  echo Example calls:
  echo %PROGRAM% /B build
  echo %PROGRAM% /B build /gpu
  echo %PROGRAM% /B build /cxx /WithBoost
  echo %PROGRAM% /B build "-DCMAKE_CUDA_COMPILER^=/opt/cuda/bin/nvcc"
  EXIT /B 0

rem ============================================================================

:END

call %SCRIPTDIR%\unset_values.bat