diff --git a/Program/XLLC/CORE/core_cm3.c b/Program/XLLC/CORE/core_cm3.c new file mode 100644 index 0000000000000000000000000000000000000000..56fddc52bfc0513f5b0aa7c927c3488f357ba071 --- /dev/null +++ b/Program/XLLC/CORE/core_cm3.c @@ -0,0 +1,784 @@ +/**************************************************************************//** + * @file core_cm3.c + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Source File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#include + +/* define compiler specific symbols */ +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +__ASM uint32_t __get_PSP(void) +{ + mrs r0, psp + bx lr +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +__ASM void __set_PSP(uint32_t topOfProcStack) +{ + msr psp, r0 + bx lr +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +__ASM uint32_t __get_MSP(void) +{ + mrs r0, msp + bx lr +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +__ASM void __set_MSP(uint32_t mainStackPointer) +{ + msr msp, r0 + bx lr +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +__ASM uint32_t __REV16(uint16_t value) +{ + rev16 r0, r0 + bx lr +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +__ASM int32_t __REVSH(int16_t value) +{ + revsh r0, r0 + bx lr +} + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +__ASM void __CLREX(void) +{ + clrex +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +__ASM uint32_t __get_BASEPRI(void) +{ + mrs r0, basepri + bx lr +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +__ASM void __set_BASEPRI(uint32_t basePri) +{ + msr basepri, r0 + bx lr +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +__ASM uint32_t __get_PRIMASK(void) +{ + mrs r0, primask + bx lr +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +__ASM void __set_PRIMASK(uint32_t priMask) +{ + msr primask, r0 + bx lr +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +__ASM uint32_t __get_FAULTMASK(void) +{ + mrs r0, faultmask + bx lr +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +__ASM void __set_FAULTMASK(uint32_t faultMask) +{ + msr faultmask, r0 + bx lr +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +__ASM uint32_t __get_CONTROL(void) +{ + mrs r0, control + bx lr +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +__ASM void __set_CONTROL(uint32_t control) +{ + msr control, r0 + bx lr +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ +#pragma diag_suppress=Pe940 + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) +{ + __ASM("mrs r0, psp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM("msr psp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) +{ + __ASM("mrs r0, msp"); + __ASM("bx lr"); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM("msr msp, r0"); + __ASM("bx lr"); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + __ASM("rev16 r0, r0"); + __ASM("bx lr"); +} + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +uint32_t __RBIT(uint32_t value) +{ + __ASM("rbit r0, r0"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +uint8_t __LDREXB(uint8_t *addr) +{ + __ASM("ldrexb r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +uint16_t __LDREXH(uint16_t *addr) +{ + __ASM("ldrexh r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + __ASM("ldrex r0, [r0]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + __ASM("strexb r0, r0, [r1]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + __ASM("strexh r0, r0, [r1]"); + __ASM("bx lr"); +} + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + __ASM("strex r0, r0, [r1]"); + __ASM("bx lr"); +} + +#pragma diag_default=Pe940 + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +uint32_t __get_PSP(void) __attribute__( ( naked ) ); +uint32_t __get_PSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, psp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) ); +void __set_PSP(uint32_t topOfProcStack) +{ + __ASM volatile ("MSR psp, %0\n\t" + "BX lr \n\t" : : "r" (topOfProcStack) ); +} + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +uint32_t __get_MSP(void) __attribute__( ( naked ) ); +uint32_t __get_MSP(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, msp\n\t" + "MOV r0, %0 \n\t" + "BX lr \n\t" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) ); +void __set_MSP(uint32_t topOfMainStack) +{ + __ASM volatile ("MSR msp, %0\n\t" + "BX lr \n\t" : : "r" (topOfMainStack) ); +} + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +uint32_t __get_BASEPRI(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +void __set_BASEPRI(uint32_t value) +{ + __ASM volatile ("MSR basepri, %0" : : "r" (value) ); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +uint32_t __get_PRIMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, primask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +void __set_PRIMASK(uint32_t priMask) +{ + __ASM volatile ("MSR primask, %0" : : "r" (priMask) ); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +uint32_t __get_FAULTMASK(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +void __set_FAULTMASK(uint32_t faultMask) +{ + __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) ); +} + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +uint32_t __get_CONTROL(void) +{ + uint32_t result=0; + + __ASM volatile ("MRS %0, control" : "=r" (result) ); + return(result); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +void __set_CONTROL(uint32_t control) +{ + __ASM volatile ("MSR control, %0" : : "r" (control) ); +} + + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +uint32_t __REV(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +uint32_t __REV16(uint16_t value) +{ + uint32_t result=0; + + __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +int32_t __REVSH(int16_t value) +{ + uint32_t result=0; + + __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +uint32_t __RBIT(uint32_t value) +{ + uint32_t result=0; + + __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); + return(result); +} + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +uint8_t __LDREXB(uint8_t *addr) +{ + uint8_t result=0; + + __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +uint16_t __LDREXH(uint16_t *addr) +{ + uint16_t result=0; + + __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +uint32_t __LDREXW(uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) ); + return(result); +} + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +uint32_t __STREXB(uint8_t value, uint8_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +uint32_t __STREXH(uint16_t value, uint16_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +uint32_t __STREXW(uint32_t value, uint32_t *addr) +{ + uint32_t result=0; + + __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); + return(result); +} + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif diff --git a/Program/XLLC/CORE/core_cm3.h b/Program/XLLC/CORE/core_cm3.h new file mode 100644 index 0000000000000000000000000000000000000000..2b6b51a7d599ec0f989e2cfb3a601de5a5b0881b --- /dev/null +++ b/Program/XLLC/CORE/core_cm3.h @@ -0,0 +1,1818 @@ +/**************************************************************************//** + * @file core_cm3.h + * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File + * @version V1.30 + * @date 30. October 2009 + * + * @note + * Copyright (C) 2009 ARM Limited. All rights reserved. + * + * @par + * ARM Limited (ARM) is supplying this software for use with Cortex-M + * processor based microcontrollers. This file can be freely distributed + * within development tools that are supporting such ARM based processors. + * + * @par + * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED + * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. + * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR + * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. + * + ******************************************************************************/ + +#ifndef __CM3_CORE_H__ +#define __CM3_CORE_H__ + +/** @addtogroup CMSIS_CM3_core_LintCinfiguration CMSIS CM3 Core Lint Configuration + * + * List of Lint messages which will be suppressed and not shown: + * - Error 10: \n + * register uint32_t __regBasePri __asm("basepri"); \n + * Error 10: Expecting ';' + * . + * - Error 530: \n + * return(__regBasePri); \n + * Warning 530: Symbol '__regBasePri' (line 264) not initialized + * . + * - Error 550: \n + * __regBasePri = (basePri & 0x1ff); \n + * Warning 550: Symbol '__regBasePri' (line 271) not accessed + * . + * - Error 754: \n + * uint32_t RESERVED0[24]; \n + * Info 754: local structure member '' (line 109, file ./cm3_core.h) not referenced + * . + * - Error 750: \n + * #define __CM3_CORE_H__ \n + * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced + * . + * - Error 528: \n + * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n + * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced + * . + * - Error 751: \n + * } InterruptType_Type; \n + * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced + * . + * Note: To re-enable a Message, insert a space before 'lint' * + * + */ + +/*lint -save */ +/*lint -e10 */ +/*lint -e530 */ +/*lint -e550 */ +/*lint -e754 */ +/*lint -e750 */ +/*lint -e528 */ +/*lint -e751 */ + + +/** @addtogroup CMSIS_CM3_core_definitions CM3 Core Definitions + This file defines all structures and symbols for CMSIS core: + - CMSIS version number + - Cortex-M core registers and bitfields + - Cortex-M core peripheral base address + @{ + */ + +#ifdef __cplusplus + extern "C" { +#endif + +#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */ +#define __CM3_CMSIS_VERSION_SUB (0x30) /*!< [15:0] CMSIS HAL sub version */ +#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ + +#define __CORTEX_M (0x03) /*!< Cortex core */ + +#include /* Include standard types */ + +#if defined (__ICCARM__) + #include /* IAR Intrinsics */ +#endif + + +#ifndef __NVIC_PRIO_BITS + #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */ +#endif + + + + +/** + * IO definitions + * + * define access restrictions to peripheral registers + */ + +#ifdef __cplusplus + #define __I volatile /*!< defines 'read only' permissions */ +#else + #define __I volatile const /*!< defines 'read only' permissions */ +#endif +#define __O volatile /*!< defines 'write only' permissions */ +#define __IO volatile /*!< defines 'read / write' permissions */ + + + +/******************************************************************************* + * Register Abstraction + ******************************************************************************/ +/** @addtogroup CMSIS_CM3_core_register CMSIS CM3 Core Register + @{ +*/ + + +/** @addtogroup CMSIS_CM3_NVIC CMSIS CM3 NVIC + memory mapped structure for Nested Vectored Interrupt Controller (NVIC) + @{ + */ +typedef struct +{ + __IO uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */ + uint32_t RESERVED0[24]; + __IO uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */ + uint32_t RSERVED1[24]; + __IO uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */ + uint32_t RESERVED2[24]; + __IO uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */ + uint32_t RESERVED3[24]; + __IO uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */ + uint32_t RESERVED4[56]; + __IO uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */ + uint32_t RESERVED5[644]; + __O uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */ +} NVIC_Type; +/*@}*/ /* end of group CMSIS_CM3_NVIC */ + + +/** @addtogroup CMSIS_CM3_SCB CMSIS CM3 SCB + memory mapped structure for System Control Block (SCB) + @{ + */ +typedef struct +{ + __I uint32_t CPUID; /*!< Offset: 0x00 CPU ID Base Register */ + __IO uint32_t ICSR; /*!< Offset: 0x04 Interrupt Control State Register */ + __IO uint32_t VTOR; /*!< Offset: 0x08 Vector Table Offset Register */ + __IO uint32_t AIRCR; /*!< Offset: 0x0C Application Interrupt / Reset Control Register */ + __IO uint32_t SCR; /*!< Offset: 0x10 System Control Register */ + __IO uint32_t CCR; /*!< Offset: 0x14 Configuration Control Register */ + __IO uint8_t SHP[12]; /*!< Offset: 0x18 System Handlers Priority Registers (4-7, 8-11, 12-15) */ + __IO uint32_t SHCSR; /*!< Offset: 0x24 System Handler Control and State Register */ + __IO uint32_t CFSR; /*!< Offset: 0x28 Configurable Fault Status Register */ + __IO uint32_t HFSR; /*!< Offset: 0x2C Hard Fault Status Register */ + __IO uint32_t DFSR; /*!< Offset: 0x30 Debug Fault Status Register */ + __IO uint32_t MMFAR; /*!< Offset: 0x34 Mem Manage Address Register */ + __IO uint32_t BFAR; /*!< Offset: 0x38 Bus Fault Address Register */ + __IO uint32_t AFSR; /*!< Offset: 0x3C Auxiliary Fault Status Register */ + __I uint32_t PFR[2]; /*!< Offset: 0x40 Processor Feature Register */ + __I uint32_t DFR; /*!< Offset: 0x48 Debug Feature Register */ + __I uint32_t ADR; /*!< Offset: 0x4C Auxiliary Feature Register */ + __I uint32_t MMFR[4]; /*!< Offset: 0x50 Memory Model Feature Register */ + __I uint32_t ISAR[5]; /*!< Offset: 0x60 ISA Feature Register */ +} SCB_Type; + +/* SCB CPUID Register Definitions */ +#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */ +#define SCB_CPUID_IMPLEMENTER_Msk (0xFFul << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */ + +#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */ +#define SCB_CPUID_VARIANT_Msk (0xFul << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */ + +#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */ +#define SCB_CPUID_PARTNO_Msk (0xFFFul << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */ + +#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */ +#define SCB_CPUID_REVISION_Msk (0xFul << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */ +#define SCB_ICSR_NMIPENDSET_Msk (1ul << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */ + +#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */ +#define SCB_ICSR_PENDSVSET_Msk (1ul << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */ + +#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */ +#define SCB_ICSR_PENDSVCLR_Msk (1ul << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */ + +#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */ +#define SCB_ICSR_PENDSTSET_Msk (1ul << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */ + +#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */ +#define SCB_ICSR_PENDSTCLR_Msk (1ul << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */ + +#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */ +#define SCB_ICSR_ISRPREEMPT_Msk (1ul << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */ + +#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */ +#define SCB_ICSR_ISRPENDING_Msk (1ul << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */ + +#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */ +#define SCB_ICSR_VECTPENDING_Msk (0x1FFul << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */ + +#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */ +#define SCB_ICSR_RETTOBASE_Msk (1ul << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */ + +#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */ +#define SCB_ICSR_VECTACTIVE_Msk (0x1FFul << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */ + +/* SCB Interrupt Control State Register Definitions */ +#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (0x1FFul << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */ +#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFul << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */ + +/* SCB Application Interrupt and Reset Control Register Definitions */ +#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */ +#define SCB_AIRCR_VECTKEY_Msk (0xFFFFul << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */ + +#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */ +#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFul << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */ + +#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */ +#define SCB_AIRCR_ENDIANESS_Msk (1ul << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */ + +#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */ +#define SCB_AIRCR_PRIGROUP_Msk (7ul << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */ + +#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */ +#define SCB_AIRCR_SYSRESETREQ_Msk (1ul << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */ + +#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */ +#define SCB_AIRCR_VECTCLRACTIVE_Msk (1ul << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */ + +#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */ +#define SCB_AIRCR_VECTRESET_Msk (1ul << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */ + +/* SCB System Control Register Definitions */ +#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */ +#define SCB_SCR_SEVONPEND_Msk (1ul << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */ + +#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */ +#define SCB_SCR_SLEEPDEEP_Msk (1ul << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */ + +#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */ +#define SCB_SCR_SLEEPONEXIT_Msk (1ul << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */ + +/* SCB Configuration Control Register Definitions */ +#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */ +#define SCB_CCR_STKALIGN_Msk (1ul << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */ + +#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */ +#define SCB_CCR_BFHFNMIGN_Msk (1ul << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */ + +#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */ +#define SCB_CCR_DIV_0_TRP_Msk (1ul << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */ + +#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */ +#define SCB_CCR_UNALIGN_TRP_Msk (1ul << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */ + +#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */ +#define SCB_CCR_USERSETMPEND_Msk (1ul << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */ + +#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */ +#define SCB_CCR_NONBASETHRDENA_Msk (1ul << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */ + +/* SCB System Handler Control and State Register Definitions */ +#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */ +#define SCB_SHCSR_USGFAULTENA_Msk (1ul << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */ + +#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */ +#define SCB_SHCSR_BUSFAULTENA_Msk (1ul << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */ + +#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */ +#define SCB_SHCSR_MEMFAULTENA_Msk (1ul << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */ + +#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */ +#define SCB_SHCSR_SVCALLPENDED_Msk (1ul << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */ + +#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */ +#define SCB_SHCSR_BUSFAULTPENDED_Msk (1ul << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */ + +#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */ +#define SCB_SHCSR_MEMFAULTPENDED_Msk (1ul << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */ + +#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */ +#define SCB_SHCSR_USGFAULTPENDED_Msk (1ul << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */ + +#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */ +#define SCB_SHCSR_SYSTICKACT_Msk (1ul << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */ + +#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */ +#define SCB_SHCSR_PENDSVACT_Msk (1ul << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */ + +#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */ +#define SCB_SHCSR_MONITORACT_Msk (1ul << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */ + +#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */ +#define SCB_SHCSR_SVCALLACT_Msk (1ul << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */ + +#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */ +#define SCB_SHCSR_USGFAULTACT_Msk (1ul << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */ + +#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */ +#define SCB_SHCSR_BUSFAULTACT_Msk (1ul << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */ + +#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */ +#define SCB_SHCSR_MEMFAULTACT_Msk (1ul << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */ + +/* SCB Configurable Fault Status Registers Definitions */ +#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */ +#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFul << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */ + +#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */ +#define SCB_CFSR_BUSFAULTSR_Msk (0xFFul << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */ + +#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */ +#define SCB_CFSR_MEMFAULTSR_Msk (0xFFul << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */ + +/* SCB Hard Fault Status Registers Definitions */ +#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */ +#define SCB_HFSR_DEBUGEVT_Msk (1ul << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */ + +#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */ +#define SCB_HFSR_FORCED_Msk (1ul << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */ + +#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */ +#define SCB_HFSR_VECTTBL_Msk (1ul << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */ + +/* SCB Debug Fault Status Register Definitions */ +#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */ +#define SCB_DFSR_EXTERNAL_Msk (1ul << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */ + +#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */ +#define SCB_DFSR_VCATCH_Msk (1ul << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */ + +#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */ +#define SCB_DFSR_DWTTRAP_Msk (1ul << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */ + +#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */ +#define SCB_DFSR_BKPT_Msk (1ul << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */ + +#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */ +#define SCB_DFSR_HALTED_Msk (1ul << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */ +/*@}*/ /* end of group CMSIS_CM3_SCB */ + + +/** @addtogroup CMSIS_CM3_SysTick CMSIS CM3 SysTick + memory mapped structure for SysTick + @{ + */ +typedef struct +{ + __IO uint32_t CTRL; /*!< Offset: 0x00 SysTick Control and Status Register */ + __IO uint32_t LOAD; /*!< Offset: 0x04 SysTick Reload Value Register */ + __IO uint32_t VAL; /*!< Offset: 0x08 SysTick Current Value Register */ + __I uint32_t CALIB; /*!< Offset: 0x0C SysTick Calibration Register */ +} SysTick_Type; + +/* SysTick Control / Status Register Definitions */ +#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */ +#define SysTick_CTRL_COUNTFLAG_Msk (1ul << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */ + +#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */ +#define SysTick_CTRL_CLKSOURCE_Msk (1ul << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */ + +#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */ +#define SysTick_CTRL_TICKINT_Msk (1ul << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */ + +#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */ +#define SysTick_CTRL_ENABLE_Msk (1ul << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */ + +/* SysTick Reload Register Definitions */ +#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */ +#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFul << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */ + +/* SysTick Current Register Definitions */ +#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */ +#define SysTick_VAL_CURRENT_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */ + +/* SysTick Calibration Register Definitions */ +#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */ +#define SysTick_CALIB_NOREF_Msk (1ul << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */ + +#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */ +#define SysTick_CALIB_SKEW_Msk (1ul << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */ + +#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */ +#define SysTick_CALIB_TENMS_Msk (0xFFFFFFul << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */ +/*@}*/ /* end of group CMSIS_CM3_SysTick */ + + +/** @addtogroup CMSIS_CM3_ITM CMSIS CM3 ITM + memory mapped structure for Instrumentation Trace Macrocell (ITM) + @{ + */ +typedef struct +{ + __O union + { + __O uint8_t u8; /*!< Offset: ITM Stimulus Port 8-bit */ + __O uint16_t u16; /*!< Offset: ITM Stimulus Port 16-bit */ + __O uint32_t u32; /*!< Offset: ITM Stimulus Port 32-bit */ + } PORT [32]; /*!< Offset: 0x00 ITM Stimulus Port Registers */ + uint32_t RESERVED0[864]; + __IO uint32_t TER; /*!< Offset: ITM Trace Enable Register */ + uint32_t RESERVED1[15]; + __IO uint32_t TPR; /*!< Offset: ITM Trace Privilege Register */ + uint32_t RESERVED2[15]; + __IO uint32_t TCR; /*!< Offset: ITM Trace Control Register */ + uint32_t RESERVED3[29]; + __IO uint32_t IWR; /*!< Offset: ITM Integration Write Register */ + __IO uint32_t IRR; /*!< Offset: ITM Integration Read Register */ + __IO uint32_t IMCR; /*!< Offset: ITM Integration Mode Control Register */ + uint32_t RESERVED4[43]; + __IO uint32_t LAR; /*!< Offset: ITM Lock Access Register */ + __IO uint32_t LSR; /*!< Offset: ITM Lock Status Register */ + uint32_t RESERVED5[6]; + __I uint32_t PID4; /*!< Offset: ITM Peripheral Identification Register #4 */ + __I uint32_t PID5; /*!< Offset: ITM Peripheral Identification Register #5 */ + __I uint32_t PID6; /*!< Offset: ITM Peripheral Identification Register #6 */ + __I uint32_t PID7; /*!< Offset: ITM Peripheral Identification Register #7 */ + __I uint32_t PID0; /*!< Offset: ITM Peripheral Identification Register #0 */ + __I uint32_t PID1; /*!< Offset: ITM Peripheral Identification Register #1 */ + __I uint32_t PID2; /*!< Offset: ITM Peripheral Identification Register #2 */ + __I uint32_t PID3; /*!< Offset: ITM Peripheral Identification Register #3 */ + __I uint32_t CID0; /*!< Offset: ITM Component Identification Register #0 */ + __I uint32_t CID1; /*!< Offset: ITM Component Identification Register #1 */ + __I uint32_t CID2; /*!< Offset: ITM Component Identification Register #2 */ + __I uint32_t CID3; /*!< Offset: ITM Component Identification Register #3 */ +} ITM_Type; + +/* ITM Trace Privilege Register Definitions */ +#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */ +#define ITM_TPR_PRIVMASK_Msk (0xFul << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */ + +/* ITM Trace Control Register Definitions */ +#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */ +#define ITM_TCR_BUSY_Msk (1ul << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */ + +#define ITM_TCR_ATBID_Pos 16 /*!< ITM TCR: ATBID Position */ +#define ITM_TCR_ATBID_Msk (0x7Ful << ITM_TCR_ATBID_Pos) /*!< ITM TCR: ATBID Mask */ + +#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */ +#define ITM_TCR_TSPrescale_Msk (3ul << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */ + +#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */ +#define ITM_TCR_SWOENA_Msk (1ul << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */ + +#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */ +#define ITM_TCR_DWTENA_Msk (1ul << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */ + +#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */ +#define ITM_TCR_SYNCENA_Msk (1ul << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */ + +#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */ +#define ITM_TCR_TSENA_Msk (1ul << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */ + +#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */ +#define ITM_TCR_ITMENA_Msk (1ul << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */ + +/* ITM Integration Write Register Definitions */ +#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */ +#define ITM_IWR_ATVALIDM_Msk (1ul << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */ + +/* ITM Integration Read Register Definitions */ +#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */ +#define ITM_IRR_ATREADYM_Msk (1ul << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */ + +/* ITM Integration Mode Control Register Definitions */ +#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */ +#define ITM_IMCR_INTEGRATION_Msk (1ul << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */ + +/* ITM Lock Status Register Definitions */ +#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */ +#define ITM_LSR_ByteAcc_Msk (1ul << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */ + +#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */ +#define ITM_LSR_Access_Msk (1ul << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */ + +#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */ +#define ITM_LSR_Present_Msk (1ul << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */ +/*@}*/ /* end of group CMSIS_CM3_ITM */ + + +/** @addtogroup CMSIS_CM3_InterruptType CMSIS CM3 Interrupt Type + memory mapped structure for Interrupt Type + @{ + */ +typedef struct +{ + uint32_t RESERVED0; + __I uint32_t ICTR; /*!< Offset: 0x04 Interrupt Control Type Register */ +#if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) + __IO uint32_t ACTLR; /*!< Offset: 0x08 Auxiliary Control Register */ +#else + uint32_t RESERVED1; +#endif +} InterruptType_Type; + +/* Interrupt Controller Type Register Definitions */ +#define InterruptType_ICTR_INTLINESNUM_Pos 0 /*!< InterruptType ICTR: INTLINESNUM Position */ +#define InterruptType_ICTR_INTLINESNUM_Msk (0x1Ful << InterruptType_ICTR_INTLINESNUM_Pos) /*!< InterruptType ICTR: INTLINESNUM Mask */ + +/* Auxiliary Control Register Definitions */ +#define InterruptType_ACTLR_DISFOLD_Pos 2 /*!< InterruptType ACTLR: DISFOLD Position */ +#define InterruptType_ACTLR_DISFOLD_Msk (1ul << InterruptType_ACTLR_DISFOLD_Pos) /*!< InterruptType ACTLR: DISFOLD Mask */ + +#define InterruptType_ACTLR_DISDEFWBUF_Pos 1 /*!< InterruptType ACTLR: DISDEFWBUF Position */ +#define InterruptType_ACTLR_DISDEFWBUF_Msk (1ul << InterruptType_ACTLR_DISDEFWBUF_Pos) /*!< InterruptType ACTLR: DISDEFWBUF Mask */ + +#define InterruptType_ACTLR_DISMCYCINT_Pos 0 /*!< InterruptType ACTLR: DISMCYCINT Position */ +#define InterruptType_ACTLR_DISMCYCINT_Msk (1ul << InterruptType_ACTLR_DISMCYCINT_Pos) /*!< InterruptType ACTLR: DISMCYCINT Mask */ +/*@}*/ /* end of group CMSIS_CM3_InterruptType */ + + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) +/** @addtogroup CMSIS_CM3_MPU CMSIS CM3 MPU + memory mapped structure for Memory Protection Unit (MPU) + @{ + */ +typedef struct +{ + __I uint32_t TYPE; /*!< Offset: 0x00 MPU Type Register */ + __IO uint32_t CTRL; /*!< Offset: 0x04 MPU Control Register */ + __IO uint32_t RNR; /*!< Offset: 0x08 MPU Region RNRber Register */ + __IO uint32_t RBAR; /*!< Offset: 0x0C MPU Region Base Address Register */ + __IO uint32_t RASR; /*!< Offset: 0x10 MPU Region Attribute and Size Register */ + __IO uint32_t RBAR_A1; /*!< Offset: 0x14 MPU Alias 1 Region Base Address Register */ + __IO uint32_t RASR_A1; /*!< Offset: 0x18 MPU Alias 1 Region Attribute and Size Register */ + __IO uint32_t RBAR_A2; /*!< Offset: 0x1C MPU Alias 2 Region Base Address Register */ + __IO uint32_t RASR_A2; /*!< Offset: 0x20 MPU Alias 2 Region Attribute and Size Register */ + __IO uint32_t RBAR_A3; /*!< Offset: 0x24 MPU Alias 3 Region Base Address Register */ + __IO uint32_t RASR_A3; /*!< Offset: 0x28 MPU Alias 3 Region Attribute and Size Register */ +} MPU_Type; + +/* MPU Type Register */ +#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */ +#define MPU_TYPE_IREGION_Msk (0xFFul << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */ + +#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */ +#define MPU_TYPE_DREGION_Msk (0xFFul << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */ + +#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */ +#define MPU_TYPE_SEPARATE_Msk (1ul << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */ + +/* MPU Control Register */ +#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */ +#define MPU_CTRL_PRIVDEFENA_Msk (1ul << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */ + +#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */ +#define MPU_CTRL_HFNMIENA_Msk (1ul << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */ + +#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */ +#define MPU_CTRL_ENABLE_Msk (1ul << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */ + +/* MPU Region Number Register */ +#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */ +#define MPU_RNR_REGION_Msk (0xFFul << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */ + +/* MPU Region Base Address Register */ +#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */ +#define MPU_RBAR_ADDR_Msk (0x7FFFFFFul << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */ + +#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */ +#define MPU_RBAR_VALID_Msk (1ul << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */ + +#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */ +#define MPU_RBAR_REGION_Msk (0xFul << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */ + +/* MPU Region Attribute and Size Register */ +#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: XN Position */ +#define MPU_RASR_XN_Msk (1ul << MPU_RASR_XN_Pos) /*!< MPU RASR: XN Mask */ + +#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: AP Position */ +#define MPU_RASR_AP_Msk (7ul << MPU_RASR_AP_Pos) /*!< MPU RASR: AP Mask */ + +#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: TEX Position */ +#define MPU_RASR_TEX_Msk (7ul << MPU_RASR_TEX_Pos) /*!< MPU RASR: TEX Mask */ + +#define MPU_RASR_S_Pos 18 /*!< MPU RASR: Shareable bit Position */ +#define MPU_RASR_S_Msk (1ul << MPU_RASR_S_Pos) /*!< MPU RASR: Shareable bit Mask */ + +#define MPU_RASR_C_Pos 17 /*!< MPU RASR: Cacheable bit Position */ +#define MPU_RASR_C_Msk (1ul << MPU_RASR_C_Pos) /*!< MPU RASR: Cacheable bit Mask */ + +#define MPU_RASR_B_Pos 16 /*!< MPU RASR: Bufferable bit Position */ +#define MPU_RASR_B_Msk (1ul << MPU_RASR_B_Pos) /*!< MPU RASR: Bufferable bit Mask */ + +#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */ +#define MPU_RASR_SRD_Msk (0xFFul << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */ + +#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */ +#define MPU_RASR_SIZE_Msk (0x1Ful << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */ + +#define MPU_RASR_ENA_Pos 0 /*!< MPU RASR: Region enable bit Position */ +#define MPU_RASR_ENA_Msk (0x1Ful << MPU_RASR_ENA_Pos) /*!< MPU RASR: Region enable bit Disable Mask */ + +/*@}*/ /* end of group CMSIS_CM3_MPU */ +#endif + + +/** @addtogroup CMSIS_CM3_CoreDebug CMSIS CM3 Core Debug + memory mapped structure for Core Debug Register + @{ + */ +typedef struct +{ + __IO uint32_t DHCSR; /*!< Offset: 0x00 Debug Halting Control and Status Register */ + __O uint32_t DCRSR; /*!< Offset: 0x04 Debug Core Register Selector Register */ + __IO uint32_t DCRDR; /*!< Offset: 0x08 Debug Core Register Data Register */ + __IO uint32_t DEMCR; /*!< Offset: 0x0C Debug Exception and Monitor Control Register */ +} CoreDebug_Type; + +/* Debug Halting Control and Status Register */ +#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */ +#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFul << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */ + +#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */ +#define CoreDebug_DHCSR_S_RESET_ST_Msk (1ul << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */ + +#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */ +#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1ul << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */ + +#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */ +#define CoreDebug_DHCSR_S_LOCKUP_Msk (1ul << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */ + +#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */ +#define CoreDebug_DHCSR_S_SLEEP_Msk (1ul << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */ + +#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */ +#define CoreDebug_DHCSR_S_HALT_Msk (1ul << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */ + +#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */ +#define CoreDebug_DHCSR_S_REGRDY_Msk (1ul << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */ + +#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */ +#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1ul << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */ + +#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */ +#define CoreDebug_DHCSR_C_MASKINTS_Msk (1ul << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */ + +#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */ +#define CoreDebug_DHCSR_C_STEP_Msk (1ul << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */ + +#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */ +#define CoreDebug_DHCSR_C_HALT_Msk (1ul << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */ + +#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */ +#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1ul << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */ + +/* Debug Core Register Selector Register */ +#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */ +#define CoreDebug_DCRSR_REGWnR_Msk (1ul << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */ + +#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */ +#define CoreDebug_DCRSR_REGSEL_Msk (0x1Ful << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */ + +/* Debug Exception and Monitor Control Register */ +#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */ +#define CoreDebug_DEMCR_TRCENA_Msk (1ul << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */ + +#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */ +#define CoreDebug_DEMCR_MON_REQ_Msk (1ul << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */ + +#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */ +#define CoreDebug_DEMCR_MON_STEP_Msk (1ul << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */ + +#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */ +#define CoreDebug_DEMCR_MON_PEND_Msk (1ul << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */ + +#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */ +#define CoreDebug_DEMCR_MON_EN_Msk (1ul << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */ + +#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */ +#define CoreDebug_DEMCR_VC_HARDERR_Msk (1ul << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */ + +#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */ +#define CoreDebug_DEMCR_VC_INTERR_Msk (1ul << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */ + +#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */ +#define CoreDebug_DEMCR_VC_BUSERR_Msk (1ul << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */ + +#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */ +#define CoreDebug_DEMCR_VC_STATERR_Msk (1ul << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */ + +#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */ +#define CoreDebug_DEMCR_VC_CHKERR_Msk (1ul << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */ + +#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */ +#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1ul << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */ + +#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */ +#define CoreDebug_DEMCR_VC_MMERR_Msk (1ul << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */ + +#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */ +#define CoreDebug_DEMCR_VC_CORERESET_Msk (1ul << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */ +/*@}*/ /* end of group CMSIS_CM3_CoreDebug */ + + +/* Memory mapping of Cortex-M3 Hardware */ +#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */ +#define ITM_BASE (0xE0000000) /*!< ITM Base Address */ +#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */ +#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */ +#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */ +#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */ + +#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */ +#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */ +#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */ +#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */ +#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */ +#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ + +#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) + #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */ + #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */ +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_register */ + + +/******************************************************************************* + * Hardware Abstraction Layer + ******************************************************************************/ + +#if defined ( __CC_ARM ) + #define __ASM __asm /*!< asm keyword for ARM Compiler */ + #define __INLINE __inline /*!< inline keyword for ARM Compiler */ + +#elif defined ( __ICCARM__ ) + #define __ASM __asm /*!< asm keyword for IAR Compiler */ + #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ + +#elif defined ( __GNUC__ ) + #define __ASM __asm /*!< asm keyword for GNU Compiler */ + #define __INLINE inline /*!< inline keyword for GNU Compiler */ + +#elif defined ( __TASKING__ ) + #define __ASM __asm /*!< asm keyword for TASKING Compiler */ + #define __INLINE inline /*!< inline keyword for TASKING Compiler */ + +#endif + + +/* ################### Compiler specific Intrinsics ########################### */ + +#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ +/* ARM armcc specific functions */ + +#define __enable_fault_irq __enable_fiq +#define __disable_fault_irq __disable_fiq + +#define __NOP __nop +#define __WFI __wfi +#define __WFE __wfe +#define __SEV __sev +#define __ISB() __isb(0) +#define __DSB() __dsb(0) +#define __DMB() __dmb(0) +#define __REV __rev +#define __RBIT __rbit +#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr)) +#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr)) +#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr)) +#define __STREXB(value, ptr) __strex(value, ptr) +#define __STREXH(value, ptr) __strex(value, ptr) +#define __STREXW(value, ptr) __strex(value, ptr) + + +/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */ +/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */ +/* intrinsic void __enable_irq(); */ +/* intrinsic void __disable_irq(); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + + +#if (__ARMCC_VERSION < 400000) + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +extern void __CLREX(void); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +#else /* (__ARMCC_VERSION >= 400000) */ + +/** + * @brief Remove the exclusive lock created by ldrex + * + * Removes the exclusive lock which is created by ldrex. + */ +#define __CLREX __clrex + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +static __INLINE uint32_t __get_BASEPRI(void) +{ + register uint32_t __regBasePri __ASM("basepri"); + return(__regBasePri); +} + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +static __INLINE void __set_BASEPRI(uint32_t basePri) +{ + register uint32_t __regBasePri __ASM("basepri"); + __regBasePri = (basePri & 0xff); +} + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +static __INLINE uint32_t __get_PRIMASK(void) +{ + register uint32_t __regPriMask __ASM("primask"); + return(__regPriMask); +} + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +static __INLINE void __set_PRIMASK(uint32_t priMask) +{ + register uint32_t __regPriMask __ASM("primask"); + __regPriMask = (priMask); +} + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +static __INLINE uint32_t __get_FAULTMASK(void) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + return(__regFaultMask); +} + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +static __INLINE void __set_FAULTMASK(uint32_t faultMask) +{ + register uint32_t __regFaultMask __ASM("faultmask"); + __regFaultMask = (faultMask & 1); +} + +/** + * @brief Return the Control Register value + * + * @return Control value + * + * Return the content of the control register + */ +static __INLINE uint32_t __get_CONTROL(void) +{ + register uint32_t __regControl __ASM("control"); + return(__regControl); +} + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +static __INLINE void __set_CONTROL(uint32_t control) +{ + register uint32_t __regControl __ASM("control"); + __regControl = control; +} + +#endif /* __ARMCC_VERSION */ + + + +#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ +/* IAR iccarm specific functions */ + +#define __enable_irq __enable_interrupt /*!< global Interrupt enable */ +#define __disable_irq __disable_interrupt /*!< global Interrupt disable */ + +static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); } + +#define __NOP __no_operation /*!< no operation intrinsic in IAR Compiler */ +static __INLINE void __WFI() { __ASM ("wfi"); } +static __INLINE void __WFE() { __ASM ("wfe"); } +static __INLINE void __SEV() { __ASM ("sev"); } +static __INLINE void __CLREX() { __ASM ("clrex"); } + +/* intrinsic void __ISB(void) */ +/* intrinsic void __DSB(void) */ +/* intrinsic void __DMB(void) */ +/* intrinsic void __set_PRIMASK(); */ +/* intrinsic void __get_PRIMASK(); */ +/* intrinsic void __set_FAULTMASK(); */ +/* intrinsic void __get_FAULTMASK(); */ +/* intrinsic uint32_t __REV(uint32_t value); */ +/* intrinsic uint32_t __REVSH(uint32_t value); */ +/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */ +/* intrinsic unsigned long __LDREX(unsigned long *); */ + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +extern uint32_t __RBIT(uint32_t value); + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit values) + */ +extern uint8_t __LDREXB(uint8_t *addr); + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +extern uint16_t __LDREXH(uint16_t *addr); + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + + +#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ +/* GNU gcc specific functions */ + +static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); } +static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); } + +static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); } +static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); } + +static __INLINE void __NOP() { __ASM volatile ("nop"); } +static __INLINE void __WFI() { __ASM volatile ("wfi"); } +static __INLINE void __WFE() { __ASM volatile ("wfe"); } +static __INLINE void __SEV() { __ASM volatile ("sev"); } +static __INLINE void __ISB() { __ASM volatile ("isb"); } +static __INLINE void __DSB() { __ASM volatile ("dsb"); } +static __INLINE void __DMB() { __ASM volatile ("dmb"); } +static __INLINE void __CLREX() { __ASM volatile ("clrex"); } + + +/** + * @brief Return the Process Stack Pointer + * + * @return ProcessStackPointer + * + * Return the actual process stack pointer + */ +extern uint32_t __get_PSP(void); + +/** + * @brief Set the Process Stack Pointer + * + * @param topOfProcStack Process Stack Pointer + * + * Assign the value ProcessStackPointer to the MSP + * (process stack pointer) Cortex processor register + */ +extern void __set_PSP(uint32_t topOfProcStack); + +/** + * @brief Return the Main Stack Pointer + * + * @return Main Stack Pointer + * + * Return the current value of the MSP (main stack pointer) + * Cortex processor register + */ +extern uint32_t __get_MSP(void); + +/** + * @brief Set the Main Stack Pointer + * + * @param topOfMainStack Main Stack Pointer + * + * Assign the value mainStackPointer to the MSP + * (main stack pointer) Cortex processor register + */ +extern void __set_MSP(uint32_t topOfMainStack); + +/** + * @brief Return the Base Priority value + * + * @return BasePriority + * + * Return the content of the base priority register + */ +extern uint32_t __get_BASEPRI(void); + +/** + * @brief Set the Base Priority value + * + * @param basePri BasePriority + * + * Set the base priority register + */ +extern void __set_BASEPRI(uint32_t basePri); + +/** + * @brief Return the Priority Mask value + * + * @return PriMask + * + * Return state of the priority mask bit from the priority mask register + */ +extern uint32_t __get_PRIMASK(void); + +/** + * @brief Set the Priority Mask value + * + * @param priMask PriMask + * + * Set the priority mask bit in the priority mask register + */ +extern void __set_PRIMASK(uint32_t priMask); + +/** + * @brief Return the Fault Mask value + * + * @return FaultMask + * + * Return the content of the fault mask register + */ +extern uint32_t __get_FAULTMASK(void); + +/** + * @brief Set the Fault Mask value + * + * @param faultMask faultMask value + * + * Set the fault mask register + */ +extern void __set_FAULTMASK(uint32_t faultMask); + +/** + * @brief Return the Control Register value +* +* @return Control value + * + * Return the content of the control register + */ +extern uint32_t __get_CONTROL(void); + +/** + * @brief Set the Control Register value + * + * @param control Control value + * + * Set the control register + */ +extern void __set_CONTROL(uint32_t control); + +/** + * @brief Reverse byte order in integer value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in integer value + */ +extern uint32_t __REV(uint32_t value); + +/** + * @brief Reverse byte order in unsigned short value + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in unsigned short value + */ +extern uint32_t __REV16(uint16_t value); + +/** + * @brief Reverse byte order in signed short value with sign extension to integer + * + * @param value value to reverse + * @return reversed value + * + * Reverse byte order in signed short value with sign extension to integer + */ +extern int32_t __REVSH(int16_t value); + +/** + * @brief Reverse bit order of value + * + * @param value value to reverse + * @return reversed value + * + * Reverse bit order of value + */ +extern uint32_t __RBIT(uint32_t value); + +/** + * @brief LDR Exclusive (8 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 8 bit value + */ +extern uint8_t __LDREXB(uint8_t *addr); + +/** + * @brief LDR Exclusive (16 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 16 bit values + */ +extern uint16_t __LDREXH(uint16_t *addr); + +/** + * @brief LDR Exclusive (32 bit) + * + * @param *addr address pointer + * @return value of (*address) + * + * Exclusive LDR command for 32 bit values + */ +extern uint32_t __LDREXW(uint32_t *addr); + +/** + * @brief STR Exclusive (8 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 8 bit values + */ +extern uint32_t __STREXB(uint8_t value, uint8_t *addr); + +/** + * @brief STR Exclusive (16 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 16 bit values + */ +extern uint32_t __STREXH(uint16_t value, uint16_t *addr); + +/** + * @brief STR Exclusive (32 bit) + * + * @param value value to store + * @param *addr address pointer + * @return successful / failed + * + * Exclusive STR command for 32 bit values + */ +extern uint32_t __STREXW(uint32_t value, uint32_t *addr); + + +#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ +/* TASKING carm specific functions */ + +/* + * The CMSIS functions have been implemented as intrinsics in the compiler. + * Please use "carm -?i" to get an up to date list of all instrinsics, + * Including the CMSIS ones. + */ + +#endif + + +/** @addtogroup CMSIS_CM3_Core_FunctionInterface CMSIS CM3 Core Function Interface + Core Function Interface containing: + - Core NVIC Functions + - Core SysTick Functions + - Core Reset Functions +*/ +/*@{*/ + +/* ########################## NVIC functions #################################### */ + +/** + * @brief Set the Priority Grouping in NVIC Interrupt Controller + * + * @param PriorityGroup is priority grouping field + * + * Set the priority grouping field using the required unlock sequence. + * The parameter priority_grouping is assigned to the field + * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. + */ +static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) +{ + uint32_t reg_value; + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + + reg_value = SCB->AIRCR; /* read old register configuration */ + reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */ + reg_value = (reg_value | + (0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (PriorityGroupTmp << 8)); /* Insert write key and priorty group */ + SCB->AIRCR = reg_value; +} + +/** + * @brief Get the Priority Grouping from NVIC Interrupt Controller + * + * @return priority grouping field + * + * Get the priority grouping from NVIC Interrupt Controller. + * priority grouping is SCB->AIRCR [10:8] PRIGROUP field. + */ +static __INLINE uint32_t NVIC_GetPriorityGrouping(void) +{ + return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */ +} + +/** + * @brief Enable Interrupt in NVIC Interrupt Controller + * + * @param IRQn The positive number of the external interrupt to enable + * + * Enable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) +{ + NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ +} + +/** + * @brief Disable the interrupt line for external interrupt specified + * + * @param IRQn The positive number of the external interrupt to disable + * + * Disable a device specific interupt in the NVIC interrupt controller. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) +{ + NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ +} + +/** + * @brief Read the interrupt pending bit for a device specific interrupt source + * + * @param IRQn The number of the device specifc interrupt + * @return 1 = interrupt pending, 0 = interrupt not pending + * + * Read the pending register in NVIC and return 1 if its status is pending, + * otherwise it returns 0 + */ +static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) +{ + return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ +} + +/** + * @brief Set the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for set pending + * + * Set the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ +} + +/** + * @brief Clear the pending bit for an external interrupt + * + * @param IRQn The number of the interrupt for clear pending + * + * Clear the pending bit for the specified interrupt. + * The interrupt number cannot be a negative value. + */ +static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) +{ + NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ +} + +/** + * @brief Read the active bit for an external interrupt + * + * @param IRQn The number of the interrupt for read active bit + * @return 1 = interrupt active, 0 = interrupt not active + * + * Read the active register in NVIC and returns 1 if its status is active, + * otherwise it returns 0. + */ +static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) +{ + return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ +} + +/** + * @brief Set the priority for an interrupt + * + * @param IRQn The number of the interrupt for set priority + * @param priority The priority to set + * + * Set the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) +{ + if(IRQn < 0) { + SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */ + else { + NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ +} + +/** + * @brief Read the priority for an interrupt + * + * @param IRQn The number of the interrupt for get priority + * @return The priority for the interrupt + * + * Read the priority for the specified interrupt. The interrupt + * number can be positive to specify an external (device specific) + * interrupt, or negative to specify an internal (core) interrupt. + * + * The returned priority value is automatically aligned to the implemented + * priority bits of the microcontroller. + * + * Note: The priority cannot be set for every core interrupt. + */ +static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) +{ + + if(IRQn < 0) { + return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */ + else { + return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ +} + + +/** + * @brief Encode the priority for an interrupt + * + * @param PriorityGroup The used priority group + * @param PreemptPriority The preemptive priority value (starting from 0) + * @param SubPriority The sub priority value (starting from 0) + * @return The encoded priority for the interrupt + * + * Encode the priority for an interrupt with the given priority group, + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The returned priority value can be used for NVIC_SetPriority(...) function + */ +static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + return ( + ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | + ((SubPriority & ((1 << (SubPriorityBits )) - 1))) + ); +} + + +/** + * @brief Decode the priority of an interrupt + * + * @param Priority The priority for the interrupt + * @param PriorityGroup The used priority group + * @param pPreemptPriority The preemptive priority value (starting from 0) + * @param pSubPriority The sub priority value (starting from 0) + * + * Decode an interrupt priority value with the given priority group to + * preemptive priority value and sub priority value. + * In case of a conflict between priority grouping and available + * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. + * + * The priority value can be retrieved with NVIC_GetPriority(...) function + */ +static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) +{ + uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ + uint32_t PreemptPriorityBits; + uint32_t SubPriorityBits; + + PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; + SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; + + *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); + *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); +} + + + +/* ################################## SysTick function ############################################ */ + +#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0) + +/** + * @brief Initialize and start the SysTick counter and its interrupt. + * + * @param ticks number of ticks between two interrupts + * @return 1 = failed, 0 = successful + * + * Initialise the system tick timer and its interrupt and start the + * system tick timer / counter in free running mode to generate + * periodical interrupts. + */ +static __INLINE uint32_t SysTick_Config(uint32_t ticks) +{ + if (ticks > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */ + + SysTick->LOAD = (ticks & SysTick_LOAD_RELOAD_Msk) - 1; /* set reload register */ + NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ + SysTick->VAL = 0; /* Load the SysTick Counter Value */ + SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | + SysTick_CTRL_TICKINT_Msk | + SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */ + return (0); /* Function successful */ +} + +#endif + + + + +/* ################################## Reset function ############################################ */ + +/** + * @brief Initiate a system reset request. + * + * Initiate a system reset request to reset the MCU + */ +static __INLINE void NVIC_SystemReset(void) +{ + SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) | + (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) | + SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */ + __DSB(); /* Ensure completion of memory access */ + while(1); /* wait until reset */ +} + +/*@}*/ /* end of group CMSIS_CM3_Core_FunctionInterface */ + + + +/* ##################################### Debug In/Output function ########################################### */ + +/** @addtogroup CMSIS_CM3_CoreDebugInterface CMSIS CM3 Core Debug Interface + Core Debug Interface containing: + - Core Debug Receive / Transmit Functions + - Core Debug Defines + - Core Debug Variables +*/ +/*@{*/ + +extern volatile int ITM_RxBuffer; /*!< variable to receive characters */ +#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< value identifying ITM_RxBuffer is ready for next character */ + + +/** + * @brief Outputs a character via the ITM channel 0 + * + * @param ch character to output + * @return character to output + * + * The function outputs a character via the ITM channel 0. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE uint32_t ITM_SendChar (uint32_t ch) +{ + if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA_Msk) && /* Trace enabled */ + (ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */ + (ITM->TER & (1ul << 0) ) ) /* ITM Port #0 enabled */ + { + while (ITM->PORT[0].u32 == 0); + ITM->PORT[0].u8 = (uint8_t) ch; + } + return (ch); +} + + +/** + * @brief Inputs a character via variable ITM_RxBuffer + * + * @return received character, -1 = no character received + * + * The function inputs a character via variable ITM_RxBuffer. + * The function returns when no debugger is connected that has booked the output. + * It is blocking when a debugger is connected, but the previous character send is not transmitted. + */ +static __INLINE int ITM_ReceiveChar (void) { + int ch = -1; /* no character available */ + + if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) { + ch = ITM_RxBuffer; + ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */ + } + + return (ch); +} + + +/** + * @brief Check if a character via variable ITM_RxBuffer is available + * + * @return 1 = character available, 0 = no character available + * + * The function checks variable ITM_RxBuffer whether a character is available or not. + * The function returns '1' if a character is available and '0' if no character is available. + */ +static __INLINE int ITM_CheckChar (void) { + + if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) { + return (0); /* no character available */ + } else { + return (1); /* character available */ + } +} + +/*@}*/ /* end of group CMSIS_CM3_core_DebugInterface */ + + +#ifdef __cplusplus +} +#endif + +/*@}*/ /* end of group CMSIS_CM3_core_definitions */ + +#endif /* __CM3_CORE_H__ */ + +/*lint -restore */ diff --git a/Program/XLLC/CORE/startup_stm32f10x_hd.s b/Program/XLLC/CORE/startup_stm32f10x_hd.s new file mode 100644 index 0000000000000000000000000000000000000000..adc9b94a93bcd33646138ee08ae32479c2cb28a2 --- /dev/null +++ b/Program/XLLC/CORE/startup_stm32f10x_hd.s @@ -0,0 +1,358 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_hd.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x High Density Devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system and also configure the external +;* SRAM mounted on STM3210E-EVAL board to be used as data +;* memory (optional, to be enabled by user) +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1 & ADC2 + DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX + DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_IRQHandler ; TIM1 Break + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend + DCD TIM8_BRK_IRQHandler ; TIM8 Break + DCD TIM8_UP_IRQHandler ; TIM8 Update + DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD ADC3_IRQHandler ; ADC3 + DCD FSMC_IRQHandler ; FSMC + DCD SDIO_IRQHandler ; SDIO + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_IRQHandler ; TIM6 + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 + DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 + DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 + DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + EXPORT TIM8_BRK_IRQHandler [WEAK] + EXPORT TIM8_UP_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT ADC3_IRQHandler [WEAK] + EXPORT FSMC_IRQHandler [WEAK] + EXPORT SDIO_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Channel1_IRQHandler [WEAK] + EXPORT DMA2_Channel2_IRQHandler [WEAK] + EXPORT DMA2_Channel3_IRQHandler [WEAK] + EXPORT DMA2_Channel4_5_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN1_TX_IRQHandler +USB_LP_CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +USBWakeUp_IRQHandler +TIM8_BRK_IRQHandler +TIM8_UP_IRQHandler +TIM8_TRG_COM_IRQHandler +TIM8_CC_IRQHandler +ADC3_IRQHandler +FSMC_IRQHandler +SDIO_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_IRQHandler +TIM7_IRQHandler +DMA2_Channel1_IRQHandler +DMA2_Channel2_IRQHandler +DMA2_Channel3_IRQHandler +DMA2_Channel4_5_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/Program/XLLC/FreeRTOS/croutine.c b/Program/XLLC/FreeRTOS/croutine.c new file mode 100644 index 0000000000000000000000000000000000000000..6d2cff6d5e470081b43bc5952790d7c5dec21e6c --- /dev/null +++ b/Program/XLLC/FreeRTOS/croutine.c @@ -0,0 +1,395 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +#include "FreeRTOS.h" +#include "task.h" +#include "croutine.h" + +/* Remove the whole file is co-routines are not being used. */ +#if( configUSE_CO_ROUTINES != 0 ) + +/* + * Some kernel aware debuggers require data to be viewed to be global, rather + * than file scope. + */ +#ifdef portREMOVE_STATIC_QUALIFIER + #define static +#endif + + +/* Lists for ready and blocked co-routines. --------------------*/ +static List_t pxReadyCoRoutineLists[ configMAX_CO_ROUTINE_PRIORITIES ]; /*< Prioritised ready co-routines. */ +static List_t xDelayedCoRoutineList1; /*< Delayed co-routines. */ +static List_t xDelayedCoRoutineList2; /*< Delayed co-routines (two lists are used - one for delays that have overflowed the current tick count. */ +static List_t * pxDelayedCoRoutineList; /*< Points to the delayed co-routine list currently being used. */ +static List_t * pxOverflowDelayedCoRoutineList; /*< Points to the delayed co-routine list currently being used to hold co-routines that have overflowed the current tick count. */ +static List_t xPendingReadyCoRoutineList; /*< Holds co-routines that have been readied by an external event. They cannot be added directly to the ready lists as the ready lists cannot be accessed by interrupts. */ + +/* Other file private variables. --------------------------------*/ +CRCB_t * pxCurrentCoRoutine = NULL; +static UBaseType_t uxTopCoRoutineReadyPriority = 0; +static TickType_t xCoRoutineTickCount = 0, xLastTickCount = 0, xPassedTicks = 0; + +/* The initial state of the co-routine when it is created. */ +#define corINITIAL_STATE ( 0 ) + +/* + * Place the co-routine represented by pxCRCB into the appropriate ready queue + * for the priority. It is inserted at the end of the list. + * + * This macro accesses the co-routine ready lists and therefore must not be + * used from within an ISR. + */ +#define prvAddCoRoutineToReadyQueue( pxCRCB ) \ +{ \ + if( pxCRCB->uxPriority > uxTopCoRoutineReadyPriority ) \ + { \ + uxTopCoRoutineReadyPriority = pxCRCB->uxPriority; \ + } \ + vListInsertEnd( ( List_t * ) &( pxReadyCoRoutineLists[ pxCRCB->uxPriority ] ), &( pxCRCB->xGenericListItem ) ); \ +} + +/* + * Utility to ready all the lists used by the scheduler. This is called + * automatically upon the creation of the first co-routine. + */ +static void prvInitialiseCoRoutineLists( void ); + +/* + * Co-routines that are readied by an interrupt cannot be placed directly into + * the ready lists (there is no mutual exclusion). Instead they are placed in + * in the pending ready list in order that they can later be moved to the ready + * list by the co-routine scheduler. + */ +static void prvCheckPendingReadyList( void ); + +/* + * Macro that looks at the list of co-routines that are currently delayed to + * see if any require waking. + * + * Co-routines are stored in the queue in the order of their wake time - + * meaning once one co-routine has been found whose timer has not expired + * we need not look any further down the list. + */ +static void prvCheckDelayedList( void ); + +/*-----------------------------------------------------------*/ + +BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, UBaseType_t uxPriority, UBaseType_t uxIndex ) +{ +BaseType_t xReturn; +CRCB_t *pxCoRoutine; + + /* Allocate the memory that will store the co-routine control block. */ + pxCoRoutine = ( CRCB_t * ) pvPortMalloc( sizeof( CRCB_t ) ); + if( pxCoRoutine ) + { + /* If pxCurrentCoRoutine is NULL then this is the first co-routine to + be created and the co-routine data structures need initialising. */ + if( pxCurrentCoRoutine == NULL ) + { + pxCurrentCoRoutine = pxCoRoutine; + prvInitialiseCoRoutineLists(); + } + + /* Check the priority is within limits. */ + if( uxPriority >= configMAX_CO_ROUTINE_PRIORITIES ) + { + uxPriority = configMAX_CO_ROUTINE_PRIORITIES - 1; + } + + /* Fill out the co-routine control block from the function parameters. */ + pxCoRoutine->uxState = corINITIAL_STATE; + pxCoRoutine->uxPriority = uxPriority; + pxCoRoutine->uxIndex = uxIndex; + pxCoRoutine->pxCoRoutineFunction = pxCoRoutineCode; + + /* Initialise all the other co-routine control block parameters. */ + vListInitialiseItem( &( pxCoRoutine->xGenericListItem ) ); + vListInitialiseItem( &( pxCoRoutine->xEventListItem ) ); + + /* Set the co-routine control block as a link back from the ListItem_t. + This is so we can get back to the containing CRCB from a generic item + in a list. */ + listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xGenericListItem ), pxCoRoutine ); + listSET_LIST_ITEM_OWNER( &( pxCoRoutine->xEventListItem ), pxCoRoutine ); + + /* Event lists are always in priority order. */ + listSET_LIST_ITEM_VALUE( &( pxCoRoutine->xEventListItem ), ( ( TickType_t ) configMAX_CO_ROUTINE_PRIORITIES - ( TickType_t ) uxPriority ) ); + + /* Now the co-routine has been initialised it can be added to the ready + list at the correct priority. */ + prvAddCoRoutineToReadyQueue( pxCoRoutine ); + + xReturn = pdPASS; + } + else + { + xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY; + } + + return xReturn; +} +/*-----------------------------------------------------------*/ + +void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay, List_t *pxEventList ) +{ +TickType_t xTimeToWake; + + /* Calculate the time to wake - this may overflow but this is + not a problem. */ + xTimeToWake = xCoRoutineTickCount + xTicksToDelay; + + /* We must remove ourselves from the ready list before adding + ourselves to the blocked list as the same list item is used for + both lists. */ + ( void ) uxListRemove( ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) ); + + /* The list item will be inserted in wake time order. */ + listSET_LIST_ITEM_VALUE( &( pxCurrentCoRoutine->xGenericListItem ), xTimeToWake ); + + if( xTimeToWake < xCoRoutineTickCount ) + { + /* Wake time has overflowed. Place this item in the + overflow list. */ + vListInsert( ( List_t * ) pxOverflowDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) ); + } + else + { + /* The wake time has not overflowed, so we can use the + current block list. */ + vListInsert( ( List_t * ) pxDelayedCoRoutineList, ( ListItem_t * ) &( pxCurrentCoRoutine->xGenericListItem ) ); + } + + if( pxEventList ) + { + /* Also add the co-routine to an event list. If this is done then the + function must be called with interrupts disabled. */ + vListInsert( pxEventList, &( pxCurrentCoRoutine->xEventListItem ) ); + } +} +/*-----------------------------------------------------------*/ + +static void prvCheckPendingReadyList( void ) +{ + /* Are there any co-routines waiting to get moved to the ready list? These + are co-routines that have been readied by an ISR. The ISR cannot access + the ready lists itself. */ + while( listLIST_IS_EMPTY( &xPendingReadyCoRoutineList ) == pdFALSE ) + { + CRCB_t *pxUnblockedCRCB; + + /* The pending ready list can be accessed by an ISR. */ + portDISABLE_INTERRUPTS(); + { + pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( (&xPendingReadyCoRoutineList) ); + ( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) ); + } + portENABLE_INTERRUPTS(); + + ( void ) uxListRemove( &( pxUnblockedCRCB->xGenericListItem ) ); + prvAddCoRoutineToReadyQueue( pxUnblockedCRCB ); + } +} +/*-----------------------------------------------------------*/ + +static void prvCheckDelayedList( void ) +{ +CRCB_t *pxCRCB; + + xPassedTicks = xTaskGetTickCount() - xLastTickCount; + while( xPassedTicks ) + { + xCoRoutineTickCount++; + xPassedTicks--; + + /* If the tick count has overflowed we need to swap the ready lists. */ + if( xCoRoutineTickCount == 0 ) + { + List_t * pxTemp; + + /* Tick count has overflowed so we need to swap the delay lists. If there are + any items in pxDelayedCoRoutineList here then there is an error! */ + pxTemp = pxDelayedCoRoutineList; + pxDelayedCoRoutineList = pxOverflowDelayedCoRoutineList; + pxOverflowDelayedCoRoutineList = pxTemp; + } + + /* See if this tick has made a timeout expire. */ + while( listLIST_IS_EMPTY( pxDelayedCoRoutineList ) == pdFALSE ) + { + pxCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedCoRoutineList ); + + if( xCoRoutineTickCount < listGET_LIST_ITEM_VALUE( &( pxCRCB->xGenericListItem ) ) ) + { + /* Timeout not yet expired. */ + break; + } + + portDISABLE_INTERRUPTS(); + { + /* The event could have occurred just before this critical + section. If this is the case then the generic list item will + have been moved to the pending ready list and the following + line is still valid. Also the pvContainer parameter will have + been set to NULL so the following lines are also valid. */ + ( void ) uxListRemove( &( pxCRCB->xGenericListItem ) ); + + /* Is the co-routine waiting on an event also? */ + if( pxCRCB->xEventListItem.pvContainer ) + { + ( void ) uxListRemove( &( pxCRCB->xEventListItem ) ); + } + } + portENABLE_INTERRUPTS(); + + prvAddCoRoutineToReadyQueue( pxCRCB ); + } + } + + xLastTickCount = xCoRoutineTickCount; +} +/*-----------------------------------------------------------*/ + +void vCoRoutineSchedule( void ) +{ + /* See if any co-routines readied by events need moving to the ready lists. */ + prvCheckPendingReadyList(); + + /* See if any delayed co-routines have timed out. */ + prvCheckDelayedList(); + + /* Find the highest priority queue that contains ready co-routines. */ + while( listLIST_IS_EMPTY( &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) ) ) + { + if( uxTopCoRoutineReadyPriority == 0 ) + { + /* No more co-routines to check. */ + return; + } + --uxTopCoRoutineReadyPriority; + } + + /* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the co-routines + of the same priority get an equal share of the processor time. */ + listGET_OWNER_OF_NEXT_ENTRY( pxCurrentCoRoutine, &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) ); + + /* Call the co-routine. */ + ( pxCurrentCoRoutine->pxCoRoutineFunction )( pxCurrentCoRoutine, pxCurrentCoRoutine->uxIndex ); + + return; +} +/*-----------------------------------------------------------*/ + +static void prvInitialiseCoRoutineLists( void ) +{ +UBaseType_t uxPriority; + + for( uxPriority = 0; uxPriority < configMAX_CO_ROUTINE_PRIORITIES; uxPriority++ ) + { + vListInitialise( ( List_t * ) &( pxReadyCoRoutineLists[ uxPriority ] ) ); + } + + vListInitialise( ( List_t * ) &xDelayedCoRoutineList1 ); + vListInitialise( ( List_t * ) &xDelayedCoRoutineList2 ); + vListInitialise( ( List_t * ) &xPendingReadyCoRoutineList ); + + /* Start with pxDelayedCoRoutineList using list1 and the + pxOverflowDelayedCoRoutineList using list2. */ + pxDelayedCoRoutineList = &xDelayedCoRoutineList1; + pxOverflowDelayedCoRoutineList = &xDelayedCoRoutineList2; +} +/*-----------------------------------------------------------*/ + +BaseType_t xCoRoutineRemoveFromEventList( const List_t *pxEventList ) +{ +CRCB_t *pxUnblockedCRCB; +BaseType_t xReturn; + + /* This function is called from within an interrupt. It can only access + event lists and the pending ready list. This function assumes that a + check has already been made to ensure pxEventList is not empty. */ + pxUnblockedCRCB = ( CRCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxEventList ); + ( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) ); + vListInsertEnd( ( List_t * ) &( xPendingReadyCoRoutineList ), &( pxUnblockedCRCB->xEventListItem ) ); + + if( pxUnblockedCRCB->uxPriority >= pxCurrentCoRoutine->uxPriority ) + { + xReturn = pdTRUE; + } + else + { + xReturn = pdFALSE; + } + + return xReturn; +} + +#endif /* configUSE_CO_ROUTINES == 0 */ + diff --git a/Program/XLLC/FreeRTOS/event_groups.c b/Program/XLLC/FreeRTOS/event_groups.c new file mode 100644 index 0000000000000000000000000000000000000000..15ffd644ccb870803abf21ff0cfd5ff1bd68c8c7 --- /dev/null +++ b/Program/XLLC/FreeRTOS/event_groups.c @@ -0,0 +1,752 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +/* Standard includes. */ +#include + +/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining +all the API functions to use the MPU wrappers. That should only be done when +task.h is included from an application file. */ +#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE + +/* FreeRTOS includes. */ +#include "FreeRTOS.h" +#include "task.h" +#include "timers.h" +#include "event_groups.h" + +/* Lint e961 and e750 are suppressed as a MISRA exception justified because the +MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined for the +header files above, but not in this file, in order to generate the correct +privileged Vs unprivileged linkage and placement. */ +#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750. */ + +/* The following bit fields convey control information in a task's event list +item value. It is important they don't clash with the +taskEVENT_LIST_ITEM_VALUE_IN_USE definition. */ +#if configUSE_16_BIT_TICKS == 1 + #define eventCLEAR_EVENTS_ON_EXIT_BIT 0x0100U + #define eventUNBLOCKED_DUE_TO_BIT_SET 0x0200U + #define eventWAIT_FOR_ALL_BITS 0x0400U + #define eventEVENT_BITS_CONTROL_BYTES 0xff00U +#else + #define eventCLEAR_EVENTS_ON_EXIT_BIT 0x01000000UL + #define eventUNBLOCKED_DUE_TO_BIT_SET 0x02000000UL + #define eventWAIT_FOR_ALL_BITS 0x04000000UL + #define eventEVENT_BITS_CONTROL_BYTES 0xff000000UL +#endif + +typedef struct xEventGroupDefinition +{ + EventBits_t uxEventBits; + List_t xTasksWaitingForBits; /*< List of tasks waiting for a bit to be set. */ + + #if( configUSE_TRACE_FACILITY == 1 ) + UBaseType_t uxEventGroupNumber; + #endif + + #if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) + uint8_t ucStaticallyAllocated; /*< Set to pdTRUE if the event group is statically allocated to ensure no attempt is made to free the memory. */ + #endif +} EventGroup_t; + +/*-----------------------------------------------------------*/ + +/* + * Test the bits set in uxCurrentEventBits to see if the wait condition is met. + * The wait condition is defined by xWaitForAllBits. If xWaitForAllBits is + * pdTRUE then the wait condition is met if all the bits set in uxBitsToWaitFor + * are also set in uxCurrentEventBits. If xWaitForAllBits is pdFALSE then the + * wait condition is met if any of the bits set in uxBitsToWait for are also set + * in uxCurrentEventBits. + */ +static BaseType_t prvTestWaitCondition( const EventBits_t uxCurrentEventBits, const EventBits_t uxBitsToWaitFor, const BaseType_t xWaitForAllBits ) PRIVILEGED_FUNCTION; + +/*-----------------------------------------------------------*/ + +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + + EventGroupHandle_t xEventGroupCreateStatic( StaticEventGroup_t *pxEventGroupBuffer ) + { + EventGroup_t *pxEventBits; + + /* A StaticEventGroup_t object must be provided. */ + configASSERT( pxEventGroupBuffer ); + + /* The user has provided a statically allocated event group - use it. */ + pxEventBits = ( EventGroup_t * ) pxEventGroupBuffer; /*lint !e740 EventGroup_t and StaticEventGroup_t are guaranteed to have the same size and alignment requirement - checked by configASSERT(). */ + + if( pxEventBits != NULL ) + { + pxEventBits->uxEventBits = 0; + vListInitialise( &( pxEventBits->xTasksWaitingForBits ) ); + + #if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + { + /* Both static and dynamic allocation can be used, so note that + this event group was created statically in case the event group + is later deleted. */ + pxEventBits->ucStaticallyAllocated = pdTRUE; + } + #endif /* configSUPPORT_DYNAMIC_ALLOCATION */ + + traceEVENT_GROUP_CREATE( pxEventBits ); + } + else + { + traceEVENT_GROUP_CREATE_FAILED(); + } + + return ( EventGroupHandle_t ) pxEventBits; + } + +#endif /* configSUPPORT_STATIC_ALLOCATION */ +/*-----------------------------------------------------------*/ + +#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + + EventGroupHandle_t xEventGroupCreate( void ) + { + EventGroup_t *pxEventBits; + + /* Allocate the event group. */ + pxEventBits = ( EventGroup_t * ) pvPortMalloc( sizeof( EventGroup_t ) ); + + if( pxEventBits != NULL ) + { + pxEventBits->uxEventBits = 0; + vListInitialise( &( pxEventBits->xTasksWaitingForBits ) ); + + #if( configSUPPORT_STATIC_ALLOCATION == 1 ) + { + /* Both static and dynamic allocation can be used, so note this + event group was allocated statically in case the event group is + later deleted. */ + pxEventBits->ucStaticallyAllocated = pdFALSE; + } + #endif /* configSUPPORT_STATIC_ALLOCATION */ + + traceEVENT_GROUP_CREATE( pxEventBits ); + } + else + { + traceEVENT_GROUP_CREATE_FAILED(); + } + + return ( EventGroupHandle_t ) pxEventBits; + } + +#endif /* configSUPPORT_DYNAMIC_ALLOCATION */ +/*-----------------------------------------------------------*/ + +EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, const EventBits_t uxBitsToWaitFor, TickType_t xTicksToWait ) +{ +EventBits_t uxOriginalBitValue, uxReturn; +EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup; +BaseType_t xAlreadyYielded; +BaseType_t xTimeoutOccurred = pdFALSE; + + configASSERT( ( uxBitsToWaitFor & eventEVENT_BITS_CONTROL_BYTES ) == 0 ); + configASSERT( uxBitsToWaitFor != 0 ); + #if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) ) + { + configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) ); + } + #endif + + vTaskSuspendAll(); + { + uxOriginalBitValue = pxEventBits->uxEventBits; + + ( void ) xEventGroupSetBits( xEventGroup, uxBitsToSet ); + + if( ( ( uxOriginalBitValue | uxBitsToSet ) & uxBitsToWaitFor ) == uxBitsToWaitFor ) + { + /* All the rendezvous bits are now set - no need to block. */ + uxReturn = ( uxOriginalBitValue | uxBitsToSet ); + + /* Rendezvous always clear the bits. They will have been cleared + already unless this is the only task in the rendezvous. */ + pxEventBits->uxEventBits &= ~uxBitsToWaitFor; + + xTicksToWait = 0; + } + else + { + if( xTicksToWait != ( TickType_t ) 0 ) + { + traceEVENT_GROUP_SYNC_BLOCK( xEventGroup, uxBitsToSet, uxBitsToWaitFor ); + + /* Store the bits that the calling task is waiting for in the + task's event list item so the kernel knows when a match is + found. Then enter the blocked state. */ + vTaskPlaceOnUnorderedEventList( &( pxEventBits->xTasksWaitingForBits ), ( uxBitsToWaitFor | eventCLEAR_EVENTS_ON_EXIT_BIT | eventWAIT_FOR_ALL_BITS ), xTicksToWait ); + + /* This assignment is obsolete as uxReturn will get set after + the task unblocks, but some compilers mistakenly generate a + warning about uxReturn being returned without being set if the + assignment is omitted. */ + uxReturn = 0; + } + else + { + /* The rendezvous bits were not set, but no block time was + specified - just return the current event bit value. */ + uxReturn = pxEventBits->uxEventBits; + } + } + } + xAlreadyYielded = xTaskResumeAll(); + + if( xTicksToWait != ( TickType_t ) 0 ) + { + if( xAlreadyYielded == pdFALSE ) + { + portYIELD_WITHIN_API(); + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + + /* The task blocked to wait for its required bits to be set - at this + point either the required bits were set or the block time expired. If + the required bits were set they will have been stored in the task's + event list item, and they should now be retrieved then cleared. */ + uxReturn = uxTaskResetEventItemValue(); + + if( ( uxReturn & eventUNBLOCKED_DUE_TO_BIT_SET ) == ( EventBits_t ) 0 ) + { + /* The task timed out, just return the current event bit value. */ + taskENTER_CRITICAL(); + { + uxReturn = pxEventBits->uxEventBits; + + /* Although the task got here because it timed out before the + bits it was waiting for were set, it is possible that since it + unblocked another task has set the bits. If this is the case + then it needs to clear the bits before exiting. */ + if( ( uxReturn & uxBitsToWaitFor ) == uxBitsToWaitFor ) + { + pxEventBits->uxEventBits &= ~uxBitsToWaitFor; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + taskEXIT_CRITICAL(); + + xTimeoutOccurred = pdTRUE; + } + else + { + /* The task unblocked because the bits were set. */ + } + + /* Control bits might be set as the task had blocked should not be + returned. */ + uxReturn &= ~eventEVENT_BITS_CONTROL_BYTES; + } + + traceEVENT_GROUP_SYNC_END( xEventGroup, uxBitsToSet, uxBitsToWaitFor, xTimeoutOccurred ); + + return uxReturn; +} +/*-----------------------------------------------------------*/ + +EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait ) +{ +EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup; +EventBits_t uxReturn, uxControlBits = 0; +BaseType_t xWaitConditionMet, xAlreadyYielded; +BaseType_t xTimeoutOccurred = pdFALSE; + + /* Check the user is not attempting to wait on the bits used by the kernel + itself, and that at least one bit is being requested. */ + configASSERT( xEventGroup ); + configASSERT( ( uxBitsToWaitFor & eventEVENT_BITS_CONTROL_BYTES ) == 0 ); + configASSERT( uxBitsToWaitFor != 0 ); + #if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) ) + { + configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) ); + } + #endif + + vTaskSuspendAll(); + { + const EventBits_t uxCurrentEventBits = pxEventBits->uxEventBits; + + /* Check to see if the wait condition is already met or not. */ + xWaitConditionMet = prvTestWaitCondition( uxCurrentEventBits, uxBitsToWaitFor, xWaitForAllBits ); + + if( xWaitConditionMet != pdFALSE ) + { + /* The wait condition has already been met so there is no need to + block. */ + uxReturn = uxCurrentEventBits; + xTicksToWait = ( TickType_t ) 0; + + /* Clear the wait bits if requested to do so. */ + if( xClearOnExit != pdFALSE ) + { + pxEventBits->uxEventBits &= ~uxBitsToWaitFor; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + else if( xTicksToWait == ( TickType_t ) 0 ) + { + /* The wait condition has not been met, but no block time was + specified, so just return the current value. */ + uxReturn = uxCurrentEventBits; + } + else + { + /* The task is going to block to wait for its required bits to be + set. uxControlBits are used to remember the specified behaviour of + this call to xEventGroupWaitBits() - for use when the event bits + unblock the task. */ + if( xClearOnExit != pdFALSE ) + { + uxControlBits |= eventCLEAR_EVENTS_ON_EXIT_BIT; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + + if( xWaitForAllBits != pdFALSE ) + { + uxControlBits |= eventWAIT_FOR_ALL_BITS; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + + /* Store the bits that the calling task is waiting for in the + task's event list item so the kernel knows when a match is + found. Then enter the blocked state. */ + vTaskPlaceOnUnorderedEventList( &( pxEventBits->xTasksWaitingForBits ), ( uxBitsToWaitFor | uxControlBits ), xTicksToWait ); + + /* This is obsolete as it will get set after the task unblocks, but + some compilers mistakenly generate a warning about the variable + being returned without being set if it is not done. */ + uxReturn = 0; + + traceEVENT_GROUP_WAIT_BITS_BLOCK( xEventGroup, uxBitsToWaitFor ); + } + } + xAlreadyYielded = xTaskResumeAll(); + + if( xTicksToWait != ( TickType_t ) 0 ) + { + if( xAlreadyYielded == pdFALSE ) + { + portYIELD_WITHIN_API(); + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + + /* The task blocked to wait for its required bits to be set - at this + point either the required bits were set or the block time expired. If + the required bits were set they will have been stored in the task's + event list item, and they should now be retrieved then cleared. */ + uxReturn = uxTaskResetEventItemValue(); + + if( ( uxReturn & eventUNBLOCKED_DUE_TO_BIT_SET ) == ( EventBits_t ) 0 ) + { + taskENTER_CRITICAL(); + { + /* The task timed out, just return the current event bit value. */ + uxReturn = pxEventBits->uxEventBits; + + /* It is possible that the event bits were updated between this + task leaving the Blocked state and running again. */ + if( prvTestWaitCondition( uxReturn, uxBitsToWaitFor, xWaitForAllBits ) != pdFALSE ) + { + if( xClearOnExit != pdFALSE ) + { + pxEventBits->uxEventBits &= ~uxBitsToWaitFor; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + taskEXIT_CRITICAL(); + + /* Prevent compiler warnings when trace macros are not used. */ + xTimeoutOccurred = pdFALSE; + } + else + { + /* The task unblocked because the bits were set. */ + } + + /* The task blocked so control bits may have been set. */ + uxReturn &= ~eventEVENT_BITS_CONTROL_BYTES; + } + traceEVENT_GROUP_WAIT_BITS_END( xEventGroup, uxBitsToWaitFor, xTimeoutOccurred ); + + return uxReturn; +} +/*-----------------------------------------------------------*/ + +EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear ) +{ +EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup; +EventBits_t uxReturn; + + /* Check the user is not attempting to clear the bits used by the kernel + itself. */ + configASSERT( xEventGroup ); + configASSERT( ( uxBitsToClear & eventEVENT_BITS_CONTROL_BYTES ) == 0 ); + + taskENTER_CRITICAL(); + { + traceEVENT_GROUP_CLEAR_BITS( xEventGroup, uxBitsToClear ); + + /* The value returned is the event group value prior to the bits being + cleared. */ + uxReturn = pxEventBits->uxEventBits; + + /* Clear the bits. */ + pxEventBits->uxEventBits &= ~uxBitsToClear; + } + taskEXIT_CRITICAL(); + + return uxReturn; +} +/*-----------------------------------------------------------*/ + +#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 1 ) ) + + BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear ) + { + BaseType_t xReturn; + + traceEVENT_GROUP_CLEAR_BITS_FROM_ISR( xEventGroup, uxBitsToClear ); + xReturn = xTimerPendFunctionCallFromISR( vEventGroupClearBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToClear, NULL ); + + return xReturn; + } + +#endif +/*-----------------------------------------------------------*/ + +EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup ) +{ +UBaseType_t uxSavedInterruptStatus; +EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup; +EventBits_t uxReturn; + + uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR(); + { + uxReturn = pxEventBits->uxEventBits; + } + portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus ); + + return uxReturn; +} +/*-----------------------------------------------------------*/ + +EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet ) +{ +ListItem_t *pxListItem, *pxNext; +ListItem_t const *pxListEnd; +List_t *pxList; +EventBits_t uxBitsToClear = 0, uxBitsWaitedFor, uxControlBits; +EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup; +BaseType_t xMatchFound = pdFALSE; + + /* Check the user is not attempting to set the bits used by the kernel + itself. */ + configASSERT( xEventGroup ); + configASSERT( ( uxBitsToSet & eventEVENT_BITS_CONTROL_BYTES ) == 0 ); + + pxList = &( pxEventBits->xTasksWaitingForBits ); + pxListEnd = listGET_END_MARKER( pxList ); /*lint !e826 !e740 The mini list structure is used as the list end to save RAM. This is checked and valid. */ + vTaskSuspendAll(); + { + traceEVENT_GROUP_SET_BITS( xEventGroup, uxBitsToSet ); + + pxListItem = listGET_HEAD_ENTRY( pxList ); + + /* Set the bits. */ + pxEventBits->uxEventBits |= uxBitsToSet; + + /* See if the new bit value should unblock any tasks. */ + while( pxListItem != pxListEnd ) + { + pxNext = listGET_NEXT( pxListItem ); + uxBitsWaitedFor = listGET_LIST_ITEM_VALUE( pxListItem ); + xMatchFound = pdFALSE; + + /* Split the bits waited for from the control bits. */ + uxControlBits = uxBitsWaitedFor & eventEVENT_BITS_CONTROL_BYTES; + uxBitsWaitedFor &= ~eventEVENT_BITS_CONTROL_BYTES; + + if( ( uxControlBits & eventWAIT_FOR_ALL_BITS ) == ( EventBits_t ) 0 ) + { + /* Just looking for single bit being set. */ + if( ( uxBitsWaitedFor & pxEventBits->uxEventBits ) != ( EventBits_t ) 0 ) + { + xMatchFound = pdTRUE; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + else if( ( uxBitsWaitedFor & pxEventBits->uxEventBits ) == uxBitsWaitedFor ) + { + /* All bits are set. */ + xMatchFound = pdTRUE; + } + else + { + /* Need all bits to be set, but not all the bits were set. */ + } + + if( xMatchFound != pdFALSE ) + { + /* The bits match. Should the bits be cleared on exit? */ + if( ( uxControlBits & eventCLEAR_EVENTS_ON_EXIT_BIT ) != ( EventBits_t ) 0 ) + { + uxBitsToClear |= uxBitsWaitedFor; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + + /* Store the actual event flag value in the task's event list + item before removing the task from the event list. The + eventUNBLOCKED_DUE_TO_BIT_SET bit is set so the task knows + that is was unblocked due to its required bits matching, rather + than because it timed out. */ + ( void ) xTaskRemoveFromUnorderedEventList( pxListItem, pxEventBits->uxEventBits | eventUNBLOCKED_DUE_TO_BIT_SET ); + } + + /* Move onto the next list item. Note pxListItem->pxNext is not + used here as the list item may have been removed from the event list + and inserted into the ready/pending reading list. */ + pxListItem = pxNext; + } + + /* Clear any bits that matched when the eventCLEAR_EVENTS_ON_EXIT_BIT + bit was set in the control word. */ + pxEventBits->uxEventBits &= ~uxBitsToClear; + } + ( void ) xTaskResumeAll(); + + return pxEventBits->uxEventBits; +} +/*-----------------------------------------------------------*/ + +void vEventGroupDelete( EventGroupHandle_t xEventGroup ) +{ +EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup; +const List_t *pxTasksWaitingForBits = &( pxEventBits->xTasksWaitingForBits ); + + vTaskSuspendAll(); + { + traceEVENT_GROUP_DELETE( xEventGroup ); + + while( listCURRENT_LIST_LENGTH( pxTasksWaitingForBits ) > ( UBaseType_t ) 0 ) + { + /* Unblock the task, returning 0 as the event list is being deleted + and cannot therefore have any bits set. */ + configASSERT( pxTasksWaitingForBits->xListEnd.pxNext != ( ListItem_t * ) &( pxTasksWaitingForBits->xListEnd ) ); + ( void ) xTaskRemoveFromUnorderedEventList( pxTasksWaitingForBits->xListEnd.pxNext, eventUNBLOCKED_DUE_TO_BIT_SET ); + } + + #if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) ) + { + /* The event group can only have been allocated dynamically - free + it again. */ + vPortFree( pxEventBits ); + } + #elif( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) ) + { + /* The event group could have been allocated statically or + dynamically, so check before attempting to free the memory. */ + if( pxEventBits->ucStaticallyAllocated == ( uint8_t ) pdFALSE ) + { + vPortFree( pxEventBits ); + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + #endif /* configSUPPORT_DYNAMIC_ALLOCATION */ + } + ( void ) xTaskResumeAll(); +} +/*-----------------------------------------------------------*/ + +/* For internal use only - execute a 'set bits' command that was pended from +an interrupt. */ +void vEventGroupSetBitsCallback( void *pvEventGroup, const uint32_t ulBitsToSet ) +{ + ( void ) xEventGroupSetBits( pvEventGroup, ( EventBits_t ) ulBitsToSet ); +} +/*-----------------------------------------------------------*/ + +/* For internal use only - execute a 'clear bits' command that was pended from +an interrupt. */ +void vEventGroupClearBitsCallback( void *pvEventGroup, const uint32_t ulBitsToClear ) +{ + ( void ) xEventGroupClearBits( pvEventGroup, ( EventBits_t ) ulBitsToClear ); +} +/*-----------------------------------------------------------*/ + +static BaseType_t prvTestWaitCondition( const EventBits_t uxCurrentEventBits, const EventBits_t uxBitsToWaitFor, const BaseType_t xWaitForAllBits ) +{ +BaseType_t xWaitConditionMet = pdFALSE; + + if( xWaitForAllBits == pdFALSE ) + { + /* Task only has to wait for one bit within uxBitsToWaitFor to be + set. Is one already set? */ + if( ( uxCurrentEventBits & uxBitsToWaitFor ) != ( EventBits_t ) 0 ) + { + xWaitConditionMet = pdTRUE; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + else + { + /* Task has to wait for all the bits in uxBitsToWaitFor to be set. + Are they set already? */ + if( ( uxCurrentEventBits & uxBitsToWaitFor ) == uxBitsToWaitFor ) + { + xWaitConditionMet = pdTRUE; + } + else + { + mtCOVERAGE_TEST_MARKER(); + } + } + + return xWaitConditionMet; +} +/*-----------------------------------------------------------*/ + +#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 1 ) ) + + BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken ) + { + BaseType_t xReturn; + + traceEVENT_GROUP_SET_BITS_FROM_ISR( xEventGroup, uxBitsToSet ); + xReturn = xTimerPendFunctionCallFromISR( vEventGroupSetBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToSet, pxHigherPriorityTaskWoken ); + + return xReturn; + } + +#endif +/*-----------------------------------------------------------*/ + +#if (configUSE_TRACE_FACILITY == 1) + + UBaseType_t uxEventGroupGetNumber( void* xEventGroup ) + { + UBaseType_t xReturn; + EventGroup_t *pxEventBits = ( EventGroup_t * ) xEventGroup; + + if( xEventGroup == NULL ) + { + xReturn = 0; + } + else + { + xReturn = pxEventBits->uxEventGroupNumber; + } + + return xReturn; + } + +#endif + diff --git a/Program/XLLC/FreeRTOS/include/FreeRTOS.h b/Program/XLLC/FreeRTOS/include/FreeRTOS.h new file mode 100644 index 0000000000000000000000000000000000000000..08a6be4f6445d30487503733823997f430580f25 --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/FreeRTOS.h @@ -0,0 +1,1063 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +#ifndef INC_FREERTOS_H +#define INC_FREERTOS_H + +/* + * Include the generic headers required for the FreeRTOS port being used. + */ +#include + +/* + * If stdint.h cannot be located then: + * + If using GCC ensure the -nostdint options is *not* being used. + * + Ensure the project's include path includes the directory in which your + * compiler stores stdint.h. + * + Set any compiler options necessary for it to support C99, as technically + * stdint.h is only mandatory with C99 (FreeRTOS does not require C99 in any + * other way). + * + The FreeRTOS download includes a simple stdint.h definition that can be + * used in cases where none is provided by the compiler. The files only + * contains the typedefs required to build FreeRTOS. Read the instructions + * in FreeRTOS/source/stdint.readme for more information. + */ +#include /* READ COMMENT ABOVE. */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Application specific configuration options. */ +#include "FreeRTOSConfig.h" + +/* Basic FreeRTOS definitions. */ +#include "projdefs.h" + +/* Definitions specific to the port being used. */ +#include "portable.h" + +/* Must be defaulted before configUSE_NEWLIB_REENTRANT is used below. */ +#ifndef configUSE_NEWLIB_REENTRANT + #define configUSE_NEWLIB_REENTRANT 0 +#endif + +/* Required if struct _reent is used. */ +#if ( configUSE_NEWLIB_REENTRANT == 1 ) + #include +#endif +/* + * Check all the required application specific macros have been defined. + * These macros are application specific and (as downloaded) are defined + * within FreeRTOSConfig.h. + */ + +#ifndef configMINIMAL_STACK_SIZE + #error Missing definition: configMINIMAL_STACK_SIZE must be defined in FreeRTOSConfig.h. configMINIMAL_STACK_SIZE defines the size (in words) of the stack allocated to the idle task. Refer to the demo project provided for your port for a suitable value. +#endif + +#ifndef configMAX_PRIORITIES + #error Missing definition: configMAX_PRIORITIES must be defined in FreeRTOSConfig.h. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_PREEMPTION + #error Missing definition: configUSE_PREEMPTION must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_IDLE_HOOK + #error Missing definition: configUSE_IDLE_HOOK must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_TICK_HOOK + #error Missing definition: configUSE_TICK_HOOK must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configUSE_16_BIT_TICKS + #error Missing definition: configUSE_16_BIT_TICKS must be defined in FreeRTOSConfig.h as either 1 or 0. See the Configuration section of the FreeRTOS API documentation for details. +#endif + +#ifndef configMAX_PRIORITIES + #error configMAX_PRIORITIES must be defined to be greater than or equal to 1. +#endif + +#ifndef configUSE_CO_ROUTINES + #define configUSE_CO_ROUTINES 0 +#endif + +#ifndef INCLUDE_vTaskPrioritySet + #define INCLUDE_vTaskPrioritySet 0 +#endif + +#ifndef INCLUDE_uxTaskPriorityGet + #define INCLUDE_uxTaskPriorityGet 0 +#endif + +#ifndef INCLUDE_vTaskDelete + #define INCLUDE_vTaskDelete 0 +#endif + +#ifndef INCLUDE_vTaskSuspend + #define INCLUDE_vTaskSuspend 0 +#endif + +#ifndef INCLUDE_vTaskDelayUntil + #define INCLUDE_vTaskDelayUntil 0 +#endif + +#ifndef INCLUDE_vTaskDelay + #define INCLUDE_vTaskDelay 0 +#endif + +#ifndef INCLUDE_xTaskGetIdleTaskHandle + #define INCLUDE_xTaskGetIdleTaskHandle 0 +#endif + +#ifndef INCLUDE_xTaskAbortDelay + #define INCLUDE_xTaskAbortDelay 0 +#endif + +#ifndef INCLUDE_xQueueGetMutexHolder + #define INCLUDE_xQueueGetMutexHolder 0 +#endif + +#ifndef INCLUDE_xSemaphoreGetMutexHolder + #define INCLUDE_xSemaphoreGetMutexHolder INCLUDE_xQueueGetMutexHolder +#endif + +#ifndef INCLUDE_xTaskGetHandle + #define INCLUDE_xTaskGetHandle 0 +#endif + +#ifndef INCLUDE_uxTaskGetStackHighWaterMark + #define INCLUDE_uxTaskGetStackHighWaterMark 0 +#endif + +#ifndef INCLUDE_eTaskGetState + #define INCLUDE_eTaskGetState 0 +#endif + +#ifndef INCLUDE_xTaskResumeFromISR + #define INCLUDE_xTaskResumeFromISR 1 +#endif + +#ifndef INCLUDE_xTimerPendFunctionCall + #define INCLUDE_xTimerPendFunctionCall 0 +#endif + +#ifndef INCLUDE_xTaskGetSchedulerState + #define INCLUDE_xTaskGetSchedulerState 0 +#endif + +#ifndef INCLUDE_xTaskGetCurrentTaskHandle + #define INCLUDE_xTaskGetCurrentTaskHandle 0 +#endif + +#if configUSE_CO_ROUTINES != 0 + #ifndef configMAX_CO_ROUTINE_PRIORITIES + #error configMAX_CO_ROUTINE_PRIORITIES must be greater than or equal to 1. + #endif +#endif + +#ifndef configUSE_DAEMON_TASK_STARTUP_HOOK + #define configUSE_DAEMON_TASK_STARTUP_HOOK 0 +#endif + +#ifndef configUSE_APPLICATION_TASK_TAG + #define configUSE_APPLICATION_TASK_TAG 0 +#endif + +#ifndef configNUM_THREAD_LOCAL_STORAGE_POINTERS + #define configNUM_THREAD_LOCAL_STORAGE_POINTERS 0 +#endif + +#ifndef configUSE_RECURSIVE_MUTEXES + #define configUSE_RECURSIVE_MUTEXES 0 +#endif + +#ifndef configUSE_MUTEXES + #define configUSE_MUTEXES 0 +#endif + +#ifndef configUSE_TIMERS + #define configUSE_TIMERS 0 +#endif + +#ifndef configUSE_COUNTING_SEMAPHORES + #define configUSE_COUNTING_SEMAPHORES 0 +#endif + +#ifndef configUSE_ALTERNATIVE_API + #define configUSE_ALTERNATIVE_API 0 +#endif + +#ifndef portCRITICAL_NESTING_IN_TCB + #define portCRITICAL_NESTING_IN_TCB 0 +#endif + +#ifndef configMAX_TASK_NAME_LEN + #define configMAX_TASK_NAME_LEN 16 +#endif + +#ifndef configIDLE_SHOULD_YIELD + #define configIDLE_SHOULD_YIELD 1 +#endif + +#if configMAX_TASK_NAME_LEN < 1 + #error configMAX_TASK_NAME_LEN must be set to a minimum of 1 in FreeRTOSConfig.h +#endif + +#ifndef configASSERT + #define configASSERT( x ) + #define configASSERT_DEFINED 0 +#else + #define configASSERT_DEFINED 1 +#endif + +/* The timers module relies on xTaskGetSchedulerState(). */ +#if configUSE_TIMERS == 1 + + #ifndef configTIMER_TASK_PRIORITY + #error If configUSE_TIMERS is set to 1 then configTIMER_TASK_PRIORITY must also be defined. + #endif /* configTIMER_TASK_PRIORITY */ + + #ifndef configTIMER_QUEUE_LENGTH + #error If configUSE_TIMERS is set to 1 then configTIMER_QUEUE_LENGTH must also be defined. + #endif /* configTIMER_QUEUE_LENGTH */ + + #ifndef configTIMER_TASK_STACK_DEPTH + #error If configUSE_TIMERS is set to 1 then configTIMER_TASK_STACK_DEPTH must also be defined. + #endif /* configTIMER_TASK_STACK_DEPTH */ + +#endif /* configUSE_TIMERS */ + +#ifndef portSET_INTERRUPT_MASK_FROM_ISR + #define portSET_INTERRUPT_MASK_FROM_ISR() 0 +#endif + +#ifndef portCLEAR_INTERRUPT_MASK_FROM_ISR + #define portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedStatusValue ) ( void ) uxSavedStatusValue +#endif + +#ifndef portCLEAN_UP_TCB + #define portCLEAN_UP_TCB( pxTCB ) ( void ) pxTCB +#endif + +#ifndef portPRE_TASK_DELETE_HOOK + #define portPRE_TASK_DELETE_HOOK( pvTaskToDelete, pxYieldPending ) +#endif + +#ifndef portSETUP_TCB + #define portSETUP_TCB( pxTCB ) ( void ) pxTCB +#endif + +#ifndef configQUEUE_REGISTRY_SIZE + #define configQUEUE_REGISTRY_SIZE 0U +#endif + +#if ( configQUEUE_REGISTRY_SIZE < 1 ) + #define vQueueAddToRegistry( xQueue, pcName ) + #define vQueueUnregisterQueue( xQueue ) + #define pcQueueGetName( xQueue ) +#endif + +#ifndef portPOINTER_SIZE_TYPE + #define portPOINTER_SIZE_TYPE uint32_t +#endif + +/* Remove any unused trace macros. */ +#ifndef traceSTART + /* Used to perform any necessary initialisation - for example, open a file + into which trace is to be written. */ + #define traceSTART() +#endif + +#ifndef traceEND + /* Use to close a trace, for example close a file into which trace has been + written. */ + #define traceEND() +#endif + +#ifndef traceTASK_SWITCHED_IN + /* Called after a task has been selected to run. pxCurrentTCB holds a pointer + to the task control block of the selected task. */ + #define traceTASK_SWITCHED_IN() +#endif + +#ifndef traceINCREASE_TICK_COUNT + /* Called before stepping the tick count after waking from tickless idle + sleep. */ + #define traceINCREASE_TICK_COUNT( x ) +#endif + +#ifndef traceLOW_POWER_IDLE_BEGIN + /* Called immediately before entering tickless idle. */ + #define traceLOW_POWER_IDLE_BEGIN() +#endif + +#ifndef traceLOW_POWER_IDLE_END + /* Called when returning to the Idle task after a tickless idle. */ + #define traceLOW_POWER_IDLE_END() +#endif + +#ifndef traceTASK_SWITCHED_OUT + /* Called before a task has been selected to run. pxCurrentTCB holds a pointer + to the task control block of the task being switched out. */ + #define traceTASK_SWITCHED_OUT() +#endif + +#ifndef traceTASK_PRIORITY_INHERIT + /* Called when a task attempts to take a mutex that is already held by a + lower priority task. pxTCBOfMutexHolder is a pointer to the TCB of the task + that holds the mutex. uxInheritedPriority is the priority the mutex holder + will inherit (the priority of the task that is attempting to obtain the + muted. */ + #define traceTASK_PRIORITY_INHERIT( pxTCBOfMutexHolder, uxInheritedPriority ) +#endif + +#ifndef traceTASK_PRIORITY_DISINHERIT + /* Called when a task releases a mutex, the holding of which had resulted in + the task inheriting the priority of a higher priority task. + pxTCBOfMutexHolder is a pointer to the TCB of the task that is releasing the + mutex. uxOriginalPriority is the task's configured (base) priority. */ + #define traceTASK_PRIORITY_DISINHERIT( pxTCBOfMutexHolder, uxOriginalPriority ) +#endif + +#ifndef traceBLOCKING_ON_QUEUE_RECEIVE + /* Task is about to block because it cannot read from a + queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore + upon which the read was attempted. pxCurrentTCB points to the TCB of the + task that attempted the read. */ + #define traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue ) +#endif + +#ifndef traceBLOCKING_ON_QUEUE_SEND + /* Task is about to block because it cannot write to a + queue/mutex/semaphore. pxQueue is a pointer to the queue/mutex/semaphore + upon which the write was attempted. pxCurrentTCB points to the TCB of the + task that attempted the write. */ + #define traceBLOCKING_ON_QUEUE_SEND( pxQueue ) +#endif + +#ifndef configCHECK_FOR_STACK_OVERFLOW + #define configCHECK_FOR_STACK_OVERFLOW 0 +#endif + +/* The following event macros are embedded in the kernel API calls. */ + +#ifndef traceMOVED_TASK_TO_READY_STATE + #define traceMOVED_TASK_TO_READY_STATE( pxTCB ) +#endif + +#ifndef tracePOST_MOVED_TASK_TO_READY_STATE + #define tracePOST_MOVED_TASK_TO_READY_STATE( pxTCB ) +#endif + +#ifndef traceQUEUE_CREATE + #define traceQUEUE_CREATE( pxNewQueue ) +#endif + +#ifndef traceQUEUE_CREATE_FAILED + #define traceQUEUE_CREATE_FAILED( ucQueueType ) +#endif + +#ifndef traceCREATE_MUTEX + #define traceCREATE_MUTEX( pxNewQueue ) +#endif + +#ifndef traceCREATE_MUTEX_FAILED + #define traceCREATE_MUTEX_FAILED() +#endif + +#ifndef traceGIVE_MUTEX_RECURSIVE + #define traceGIVE_MUTEX_RECURSIVE( pxMutex ) +#endif + +#ifndef traceGIVE_MUTEX_RECURSIVE_FAILED + #define traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex ) +#endif + +#ifndef traceTAKE_MUTEX_RECURSIVE + #define traceTAKE_MUTEX_RECURSIVE( pxMutex ) +#endif + +#ifndef traceTAKE_MUTEX_RECURSIVE_FAILED + #define traceTAKE_MUTEX_RECURSIVE_FAILED( pxMutex ) +#endif + +#ifndef traceCREATE_COUNTING_SEMAPHORE + #define traceCREATE_COUNTING_SEMAPHORE() +#endif + +#ifndef traceCREATE_COUNTING_SEMAPHORE_FAILED + #define traceCREATE_COUNTING_SEMAPHORE_FAILED() +#endif + +#ifndef traceQUEUE_SEND + #define traceQUEUE_SEND( pxQueue ) +#endif + +#ifndef traceQUEUE_SEND_FAILED + #define traceQUEUE_SEND_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE + #define traceQUEUE_RECEIVE( pxQueue ) +#endif + +#ifndef traceQUEUE_PEEK + #define traceQUEUE_PEEK( pxQueue ) +#endif + +#ifndef traceQUEUE_PEEK_FROM_ISR + #define traceQUEUE_PEEK_FROM_ISR( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE_FAILED + #define traceQUEUE_RECEIVE_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_SEND_FROM_ISR + #define traceQUEUE_SEND_FROM_ISR( pxQueue ) +#endif + +#ifndef traceQUEUE_SEND_FROM_ISR_FAILED + #define traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE_FROM_ISR + #define traceQUEUE_RECEIVE_FROM_ISR( pxQueue ) +#endif + +#ifndef traceQUEUE_RECEIVE_FROM_ISR_FAILED + #define traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_PEEK_FROM_ISR_FAILED + #define traceQUEUE_PEEK_FROM_ISR_FAILED( pxQueue ) +#endif + +#ifndef traceQUEUE_DELETE + #define traceQUEUE_DELETE( pxQueue ) +#endif + +#ifndef traceTASK_CREATE + #define traceTASK_CREATE( pxNewTCB ) +#endif + +#ifndef traceTASK_CREATE_FAILED + #define traceTASK_CREATE_FAILED() +#endif + +#ifndef traceTASK_DELETE + #define traceTASK_DELETE( pxTaskToDelete ) +#endif + +#ifndef traceTASK_DELAY_UNTIL + #define traceTASK_DELAY_UNTIL( x ) +#endif + +#ifndef traceTASK_DELAY + #define traceTASK_DELAY() +#endif + +#ifndef traceTASK_PRIORITY_SET + #define traceTASK_PRIORITY_SET( pxTask, uxNewPriority ) +#endif + +#ifndef traceTASK_SUSPEND + #define traceTASK_SUSPEND( pxTaskToSuspend ) +#endif + +#ifndef traceTASK_RESUME + #define traceTASK_RESUME( pxTaskToResume ) +#endif + +#ifndef traceTASK_RESUME_FROM_ISR + #define traceTASK_RESUME_FROM_ISR( pxTaskToResume ) +#endif + +#ifndef traceTASK_INCREMENT_TICK + #define traceTASK_INCREMENT_TICK( xTickCount ) +#endif + +#ifndef traceTIMER_CREATE + #define traceTIMER_CREATE( pxNewTimer ) +#endif + +#ifndef traceTIMER_CREATE_FAILED + #define traceTIMER_CREATE_FAILED() +#endif + +#ifndef traceTIMER_COMMAND_SEND + #define traceTIMER_COMMAND_SEND( xTimer, xMessageID, xMessageValueValue, xReturn ) +#endif + +#ifndef traceTIMER_EXPIRED + #define traceTIMER_EXPIRED( pxTimer ) +#endif + +#ifndef traceTIMER_COMMAND_RECEIVED + #define traceTIMER_COMMAND_RECEIVED( pxTimer, xMessageID, xMessageValue ) +#endif + +#ifndef traceMALLOC + #define traceMALLOC( pvAddress, uiSize ) +#endif + +#ifndef traceFREE + #define traceFREE( pvAddress, uiSize ) +#endif + +#ifndef traceEVENT_GROUP_CREATE + #define traceEVENT_GROUP_CREATE( xEventGroup ) +#endif + +#ifndef traceEVENT_GROUP_CREATE_FAILED + #define traceEVENT_GROUP_CREATE_FAILED() +#endif + +#ifndef traceEVENT_GROUP_SYNC_BLOCK + #define traceEVENT_GROUP_SYNC_BLOCK( xEventGroup, uxBitsToSet, uxBitsToWaitFor ) +#endif + +#ifndef traceEVENT_GROUP_SYNC_END + #define traceEVENT_GROUP_SYNC_END( xEventGroup, uxBitsToSet, uxBitsToWaitFor, xTimeoutOccurred ) ( void ) xTimeoutOccurred +#endif + +#ifndef traceEVENT_GROUP_WAIT_BITS_BLOCK + #define traceEVENT_GROUP_WAIT_BITS_BLOCK( xEventGroup, uxBitsToWaitFor ) +#endif + +#ifndef traceEVENT_GROUP_WAIT_BITS_END + #define traceEVENT_GROUP_WAIT_BITS_END( xEventGroup, uxBitsToWaitFor, xTimeoutOccurred ) ( void ) xTimeoutOccurred +#endif + +#ifndef traceEVENT_GROUP_CLEAR_BITS + #define traceEVENT_GROUP_CLEAR_BITS( xEventGroup, uxBitsToClear ) +#endif + +#ifndef traceEVENT_GROUP_CLEAR_BITS_FROM_ISR + #define traceEVENT_GROUP_CLEAR_BITS_FROM_ISR( xEventGroup, uxBitsToClear ) +#endif + +#ifndef traceEVENT_GROUP_SET_BITS + #define traceEVENT_GROUP_SET_BITS( xEventGroup, uxBitsToSet ) +#endif + +#ifndef traceEVENT_GROUP_SET_BITS_FROM_ISR + #define traceEVENT_GROUP_SET_BITS_FROM_ISR( xEventGroup, uxBitsToSet ) +#endif + +#ifndef traceEVENT_GROUP_DELETE + #define traceEVENT_GROUP_DELETE( xEventGroup ) +#endif + +#ifndef tracePEND_FUNC_CALL + #define tracePEND_FUNC_CALL(xFunctionToPend, pvParameter1, ulParameter2, ret) +#endif + +#ifndef tracePEND_FUNC_CALL_FROM_ISR + #define tracePEND_FUNC_CALL_FROM_ISR(xFunctionToPend, pvParameter1, ulParameter2, ret) +#endif + +#ifndef traceQUEUE_REGISTRY_ADD + #define traceQUEUE_REGISTRY_ADD(xQueue, pcQueueName) +#endif + +#ifndef traceTASK_NOTIFY_TAKE_BLOCK + #define traceTASK_NOTIFY_TAKE_BLOCK() +#endif + +#ifndef traceTASK_NOTIFY_TAKE + #define traceTASK_NOTIFY_TAKE() +#endif + +#ifndef traceTASK_NOTIFY_WAIT_BLOCK + #define traceTASK_NOTIFY_WAIT_BLOCK() +#endif + +#ifndef traceTASK_NOTIFY_WAIT + #define traceTASK_NOTIFY_WAIT() +#endif + +#ifndef traceTASK_NOTIFY + #define traceTASK_NOTIFY() +#endif + +#ifndef traceTASK_NOTIFY_FROM_ISR + #define traceTASK_NOTIFY_FROM_ISR() +#endif + +#ifndef traceTASK_NOTIFY_GIVE_FROM_ISR + #define traceTASK_NOTIFY_GIVE_FROM_ISR() +#endif + +#ifndef configGENERATE_RUN_TIME_STATS + #define configGENERATE_RUN_TIME_STATS 0 +#endif + +#if ( configGENERATE_RUN_TIME_STATS == 1 ) + + #ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS + #error If configGENERATE_RUN_TIME_STATS is defined then portCONFIGURE_TIMER_FOR_RUN_TIME_STATS must also be defined. portCONFIGURE_TIMER_FOR_RUN_TIME_STATS should call a port layer function to setup a peripheral timer/counter that can then be used as the run time counter time base. + #endif /* portCONFIGURE_TIMER_FOR_RUN_TIME_STATS */ + + #ifndef portGET_RUN_TIME_COUNTER_VALUE + #ifndef portALT_GET_RUN_TIME_COUNTER_VALUE + #error If configGENERATE_RUN_TIME_STATS is defined then either portGET_RUN_TIME_COUNTER_VALUE or portALT_GET_RUN_TIME_COUNTER_VALUE must also be defined. See the examples provided and the FreeRTOS web site for more information. + #endif /* portALT_GET_RUN_TIME_COUNTER_VALUE */ + #endif /* portGET_RUN_TIME_COUNTER_VALUE */ + +#endif /* configGENERATE_RUN_TIME_STATS */ + +#ifndef portCONFIGURE_TIMER_FOR_RUN_TIME_STATS + #define portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() +#endif + +#ifndef configUSE_MALLOC_FAILED_HOOK + #define configUSE_MALLOC_FAILED_HOOK 0 +#endif + +#ifndef portPRIVILEGE_BIT + #define portPRIVILEGE_BIT ( ( UBaseType_t ) 0x00 ) +#endif + +#ifndef portYIELD_WITHIN_API + #define portYIELD_WITHIN_API portYIELD +#endif + +#ifndef portSUPPRESS_TICKS_AND_SLEEP + #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) +#endif + +#ifndef configEXPECTED_IDLE_TIME_BEFORE_SLEEP + #define configEXPECTED_IDLE_TIME_BEFORE_SLEEP 2 +#endif + +#if configEXPECTED_IDLE_TIME_BEFORE_SLEEP < 2 + #error configEXPECTED_IDLE_TIME_BEFORE_SLEEP must not be less than 2 +#endif + +#ifndef configUSE_TICKLESS_IDLE + #define configUSE_TICKLESS_IDLE 0 +#endif + +#ifndef configPRE_SLEEP_PROCESSING + #define configPRE_SLEEP_PROCESSING( x ) +#endif + +#ifndef configPOST_SLEEP_PROCESSING + #define configPOST_SLEEP_PROCESSING( x ) +#endif + +#ifndef configUSE_QUEUE_SETS + #define configUSE_QUEUE_SETS 0 +#endif + +#ifndef portTASK_USES_FLOATING_POINT + #define portTASK_USES_FLOATING_POINT() +#endif + +#ifndef configUSE_TIME_SLICING + #define configUSE_TIME_SLICING 1 +#endif + +#ifndef configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS + #define configINCLUDE_APPLICATION_DEFINED_PRIVILEGED_FUNCTIONS 0 +#endif + +#ifndef configUSE_STATS_FORMATTING_FUNCTIONS + #define configUSE_STATS_FORMATTING_FUNCTIONS 0 +#endif + +#ifndef portASSERT_IF_INTERRUPT_PRIORITY_INVALID + #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() +#endif + +#ifndef configUSE_TRACE_FACILITY + #define configUSE_TRACE_FACILITY 0 +#endif + +#ifndef mtCOVERAGE_TEST_MARKER + #define mtCOVERAGE_TEST_MARKER() +#endif + +#ifndef mtCOVERAGE_TEST_DELAY + #define mtCOVERAGE_TEST_DELAY() +#endif + +#ifndef portASSERT_IF_IN_ISR + #define portASSERT_IF_IN_ISR() +#endif + +#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION + #define configUSE_PORT_OPTIMISED_TASK_SELECTION 0 +#endif + +#ifndef configAPPLICATION_ALLOCATED_HEAP + #define configAPPLICATION_ALLOCATED_HEAP 0 +#endif + +#ifndef configUSE_TASK_NOTIFICATIONS + #define configUSE_TASK_NOTIFICATIONS 1 +#endif + +#ifndef portTICK_TYPE_IS_ATOMIC + #define portTICK_TYPE_IS_ATOMIC 0 +#endif + +#ifndef configSUPPORT_STATIC_ALLOCATION + /* Defaults to 0 for backward compatibility. */ + #define configSUPPORT_STATIC_ALLOCATION 0 +#endif + +#ifndef configSUPPORT_DYNAMIC_ALLOCATION + /* Defaults to 1 for backward compatibility. */ + #define configSUPPORT_DYNAMIC_ALLOCATION 1 +#endif + +/* Sanity check the configuration. */ +#if( configUSE_TICKLESS_IDLE != 0 ) + #if( INCLUDE_vTaskSuspend != 1 ) + #error INCLUDE_vTaskSuspend must be set to 1 if configUSE_TICKLESS_IDLE is not set to 0 + #endif /* INCLUDE_vTaskSuspend */ +#endif /* configUSE_TICKLESS_IDLE */ + +#if( ( configSUPPORT_STATIC_ALLOCATION == 0 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 0 ) ) + #error configSUPPORT_STATIC_ALLOCATION and configSUPPORT_DYNAMIC_ALLOCATION cannot both be 0, but can both be 1. +#endif + +#if( ( configUSE_RECURSIVE_MUTEXES == 1 ) && ( configUSE_MUTEXES != 1 ) ) + #error configUSE_MUTEXES must be set to 1 to use recursive mutexes +#endif + +#if( portTICK_TYPE_IS_ATOMIC == 0 ) + /* Either variables of tick type cannot be read atomically, or + portTICK_TYPE_IS_ATOMIC was not set - map the critical sections used when + the tick count is returned to the standard critical section macros. */ + #define portTICK_TYPE_ENTER_CRITICAL() portENTER_CRITICAL() + #define portTICK_TYPE_EXIT_CRITICAL() portEXIT_CRITICAL() + #define portTICK_TYPE_SET_INTERRUPT_MASK_FROM_ISR() portSET_INTERRUPT_MASK_FROM_ISR() + #define portTICK_TYPE_CLEAR_INTERRUPT_MASK_FROM_ISR( x ) portCLEAR_INTERRUPT_MASK_FROM_ISR( ( x ) ) +#else + /* The tick type can be read atomically, so critical sections used when the + tick count is returned can be defined away. */ + #define portTICK_TYPE_ENTER_CRITICAL() + #define portTICK_TYPE_EXIT_CRITICAL() + #define portTICK_TYPE_SET_INTERRUPT_MASK_FROM_ISR() 0 + #define portTICK_TYPE_CLEAR_INTERRUPT_MASK_FROM_ISR( x ) ( void ) x +#endif + +/* Definitions to allow backward compatibility with FreeRTOS versions prior to +V8 if desired. */ +#ifndef configENABLE_BACKWARD_COMPATIBILITY + #define configENABLE_BACKWARD_COMPATIBILITY 1 +#endif + +#if configENABLE_BACKWARD_COMPATIBILITY == 1 + #define eTaskStateGet eTaskGetState + #define portTickType TickType_t + #define xTaskHandle TaskHandle_t + #define xQueueHandle QueueHandle_t + #define xSemaphoreHandle SemaphoreHandle_t + #define xQueueSetHandle QueueSetHandle_t + #define xQueueSetMemberHandle QueueSetMemberHandle_t + #define xTimeOutType TimeOut_t + #define xMemoryRegion MemoryRegion_t + #define xTaskParameters TaskParameters_t + #define xTaskStatusType TaskStatus_t + #define xTimerHandle TimerHandle_t + #define xCoRoutineHandle CoRoutineHandle_t + #define pdTASK_HOOK_CODE TaskHookFunction_t + #define portTICK_RATE_MS portTICK_PERIOD_MS + #define pcTaskGetTaskName pcTaskGetName + #define pcTimerGetTimerName pcTimerGetName + #define pcQueueGetQueueName pcQueueGetName + #define vTaskGetTaskInfo vTaskGetInfo + + /* Backward compatibility within the scheduler code only - these definitions + are not really required but are included for completeness. */ + #define tmrTIMER_CALLBACK TimerCallbackFunction_t + #define pdTASK_CODE TaskFunction_t + #define xListItem ListItem_t + #define xList List_t +#endif /* configENABLE_BACKWARD_COMPATIBILITY */ + +#if( configUSE_ALTERNATIVE_API != 0 ) + #error The alternative API was deprecated some time ago, and was removed in FreeRTOS V9.0 0 +#endif + +/* Set configUSE_TASK_FPU_SUPPORT to 0 to omit floating point support even +if floating point hardware is otherwise supported by the FreeRTOS port in use. +This constant is not supported by all FreeRTOS ports that include floating +point support. */ +#ifndef configUSE_TASK_FPU_SUPPORT + #define configUSE_TASK_FPU_SUPPORT 1 +#endif + +/* + * In line with software engineering best practice, FreeRTOS implements a strict + * data hiding policy, so the real structures used by FreeRTOS to maintain the + * state of tasks, queues, semaphores, etc. are not accessible to the application + * code. However, if the application writer wants to statically allocate such + * an object then the size of the object needs to be know. Dummy structures + * that are guaranteed to have the same size and alignment requirements of the + * real objects are used for this purpose. The dummy list and list item + * structures below are used for inclusion in such a dummy structure. + */ +struct xSTATIC_LIST_ITEM +{ + TickType_t xDummy1; + void *pvDummy2[ 4 ]; +}; +typedef struct xSTATIC_LIST_ITEM StaticListItem_t; + +/* See the comments above the struct xSTATIC_LIST_ITEM definition. */ +struct xSTATIC_MINI_LIST_ITEM +{ + TickType_t xDummy1; + void *pvDummy2[ 2 ]; +}; +typedef struct xSTATIC_MINI_LIST_ITEM StaticMiniListItem_t; + +/* See the comments above the struct xSTATIC_LIST_ITEM definition. */ +typedef struct xSTATIC_LIST +{ + UBaseType_t uxDummy1; + void *pvDummy2; + StaticMiniListItem_t xDummy3; +} StaticList_t; + +/* + * In line with software engineering best practice, especially when supplying a + * library that is likely to change in future versions, FreeRTOS implements a + * strict data hiding policy. This means the Task structure used internally by + * FreeRTOS is not accessible to application code. However, if the application + * writer wants to statically allocate the memory required to create a task then + * the size of the task object needs to be know. The StaticTask_t structure + * below is provided for this purpose. Its sizes and alignment requirements are + * guaranteed to match those of the genuine structure, no matter which + * architecture is being used, and no matter how the values in FreeRTOSConfig.h + * are set. Its contents are somewhat obfuscated in the hope users will + * recognise that it would be unwise to make direct use of the structure members. + */ +typedef struct xSTATIC_TCB +{ + void *pxDummy1; + #if ( portUSING_MPU_WRAPPERS == 1 ) + xMPU_SETTINGS xDummy2; + #endif + StaticListItem_t xDummy3[ 2 ]; + UBaseType_t uxDummy5; + void *pxDummy6; + uint8_t ucDummy7[ configMAX_TASK_NAME_LEN ]; + #if ( portSTACK_GROWTH > 0 ) + void *pxDummy8; + #endif + #if ( portCRITICAL_NESTING_IN_TCB == 1 ) + UBaseType_t uxDummy9; + #endif + #if ( configUSE_TRACE_FACILITY == 1 ) + UBaseType_t uxDummy10[ 2 ]; + #endif + #if ( configUSE_MUTEXES == 1 ) + UBaseType_t uxDummy12[ 2 ]; + #endif + #if ( configUSE_APPLICATION_TASK_TAG == 1 ) + void *pxDummy14; + #endif + #if( configNUM_THREAD_LOCAL_STORAGE_POINTERS > 0 ) + void *pvDummy15[ configNUM_THREAD_LOCAL_STORAGE_POINTERS ]; + #endif + #if ( configGENERATE_RUN_TIME_STATS == 1 ) + uint32_t ulDummy16; + #endif + #if ( configUSE_NEWLIB_REENTRANT == 1 ) + struct _reent xDummy17; + #endif + #if ( configUSE_TASK_NOTIFICATIONS == 1 ) + uint32_t ulDummy18; + uint8_t ucDummy19; + #endif + #if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) + uint8_t uxDummy20; + #endif + +} StaticTask_t; + +/* + * In line with software engineering best practice, especially when supplying a + * library that is likely to change in future versions, FreeRTOS implements a + * strict data hiding policy. This means the Queue structure used internally by + * FreeRTOS is not accessible to application code. However, if the application + * writer wants to statically allocate the memory required to create a queue + * then the size of the queue object needs to be know. The StaticQueue_t + * structure below is provided for this purpose. Its sizes and alignment + * requirements are guaranteed to match those of the genuine structure, no + * matter which architecture is being used, and no matter how the values in + * FreeRTOSConfig.h are set. Its contents are somewhat obfuscated in the hope + * users will recognise that it would be unwise to make direct use of the + * structure members. + */ +typedef struct xSTATIC_QUEUE +{ + void *pvDummy1[ 3 ]; + + union + { + void *pvDummy2; + UBaseType_t uxDummy2; + } u; + + StaticList_t xDummy3[ 2 ]; + UBaseType_t uxDummy4[ 3 ]; + uint8_t ucDummy5[ 2 ]; + + #if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) + uint8_t ucDummy6; + #endif + + #if ( configUSE_QUEUE_SETS == 1 ) + void *pvDummy7; + #endif + + #if ( configUSE_TRACE_FACILITY == 1 ) + UBaseType_t uxDummy8; + uint8_t ucDummy9; + #endif + +} StaticQueue_t; +typedef StaticQueue_t StaticSemaphore_t; + +/* + * In line with software engineering best practice, especially when supplying a + * library that is likely to change in future versions, FreeRTOS implements a + * strict data hiding policy. This means the event group structure used + * internally by FreeRTOS is not accessible to application code. However, if + * the application writer wants to statically allocate the memory required to + * create an event group then the size of the event group object needs to be + * know. The StaticEventGroup_t structure below is provided for this purpose. + * Its sizes and alignment requirements are guaranteed to match those of the + * genuine structure, no matter which architecture is being used, and no matter + * how the values in FreeRTOSConfig.h are set. Its contents are somewhat + * obfuscated in the hope users will recognise that it would be unwise to make + * direct use of the structure members. + */ +typedef struct xSTATIC_EVENT_GROUP +{ + TickType_t xDummy1; + StaticList_t xDummy2; + + #if( configUSE_TRACE_FACILITY == 1 ) + UBaseType_t uxDummy3; + #endif + + #if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) + uint8_t ucDummy4; + #endif + +} StaticEventGroup_t; + +/* + * In line with software engineering best practice, especially when supplying a + * library that is likely to change in future versions, FreeRTOS implements a + * strict data hiding policy. This means the software timer structure used + * internally by FreeRTOS is not accessible to application code. However, if + * the application writer wants to statically allocate the memory required to + * create a software timer then the size of the queue object needs to be know. + * The StaticTimer_t structure below is provided for this purpose. Its sizes + * and alignment requirements are guaranteed to match those of the genuine + * structure, no matter which architecture is being used, and no matter how the + * values in FreeRTOSConfig.h are set. Its contents are somewhat obfuscated in + * the hope users will recognise that it would be unwise to make direct use of + * the structure members. + */ +typedef struct xSTATIC_TIMER +{ + void *pvDummy1; + StaticListItem_t xDummy2; + TickType_t xDummy3; + UBaseType_t uxDummy4; + void *pvDummy5[ 2 ]; + #if( configUSE_TRACE_FACILITY == 1 ) + UBaseType_t uxDummy6; + #endif + + #if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) + uint8_t ucDummy7; + #endif + +} StaticTimer_t; + +#ifdef __cplusplus +} +#endif + +#endif /* INC_FREERTOS_H */ + diff --git a/Program/XLLC/FreeRTOS/include/FreeRTOSConfig.h b/Program/XLLC/FreeRTOS/include/FreeRTOSConfig.h new file mode 100644 index 0000000000000000000000000000000000000000..718dfff609fc7b503c606c36c5d1a5feb2179fc9 --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/FreeRTOSConfig.h @@ -0,0 +1,187 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + + +#ifndef FREERTOS_CONFIG_H +#define FREERTOS_CONFIG_H + +#include "sys.h" +#include "usart.h" +//Õë¶Ô²»Í¬µÄ±àÒëÆ÷µ÷Óò»Í¬µÄstdint.hÎļþ +#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__) + #include + extern uint32_t SystemCoreClock; +#endif + +//¶ÏÑÔ +#define vAssertCalled(char,int) printf("Error:%s,%d\r\n",char,int) +#define configASSERT(x) if((x)==0) vAssertCalled(__FILE__,__LINE__) + +/***************************************************************************************************************/ +/* FreeRTOS»ù´¡ÅäÖÃÅäÖÃÑ¡Ïî */ +/***************************************************************************************************************/ +#define configUSE_PREEMPTION 1 //1ʹÓÃÇÀռʽÄںˣ¬0ʹÓÃЭ³Ì +#define configUSE_TIME_SLICING 1 //1ʹÄÜʱ¼äƬµ÷¶È(ĬÈÏʽʹÄܵÄ) +#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 //1ÆôÓÃÌØÊâ·½·¨À´Ñ¡ÔñÏÂÒ»¸öÒªÔËÐеÄÈÎÎñ + //Ò»°ãÊÇÓ²¼þ¼ÆËãÇ°µ¼ÁãÖ¸ÁÈç¹ûËùʹÓÃµÄ + //MCUûÓÐÕâЩӲ¼þÖ¸ÁîµÄ»°´ËºêÓ¦¸ÃÉèÖÃΪ0£¡ +#define configUSE_TICKLESS_IDLE 0 //1ÆôÓõ͹¦ºÄticklessģʽ +#define configUSE_QUEUE_SETS 1 //Ϊ1ʱÆôÓöÓÁÐ +#define configCPU_CLOCK_HZ (SystemCoreClock) //CPUƵÂÊ +#define configTICK_RATE_HZ (1000) //ʱÖÓ½ÚÅÄƵÂÊ£¬ÕâÀïÉèÖÃΪ1000£¬ÖÜÆÚ¾ÍÊÇ1ms +#define configMAX_PRIORITIES (32) //¿ÉʹÓõÄ×î´óÓÅÏȼ¶ +#define configMINIMAL_STACK_SIZE ((unsigned short)130) //¿ÕÏÐÈÎÎñʹÓõĶÑÕ»´óС +#define configMAX_TASK_NAME_LEN (16) //ÈÎÎñÃû×Ö×Ö·û´®³¤¶È + +#define configUSE_16_BIT_TICKS 0 //ϵͳ½ÚÅļÆÊýÆ÷±äÁ¿Êý¾ÝÀàÐÍ£¬ + //1±íʾΪ16λÎÞ·ûºÅÕûÐΣ¬0±íʾΪ32λÎÞ·ûºÅÕûÐÎ +#define configIDLE_SHOULD_YIELD 1 //Ϊ1ʱ¿ÕÏÐÈÎÎñ·ÅÆúCPUʹÓÃȨ¸øÆäËûͬÓÅÏȼ¶µÄÓû§ÈÎÎñ +#define configUSE_TASK_NOTIFICATIONS 1 //Ϊ1ʱ¿ªÆôÈÎÎñ֪ͨ¹¦ÄÜ£¬Ä¬ÈÏ¿ªÆô +#define configUSE_MUTEXES 1 //Ϊ1ʱʹÓû¥³âÐźÅÁ¿ +#define configQUEUE_REGISTRY_SIZE 8 //²»Îª0ʱ±íʾÆôÓöÓÁмǼ£¬¾ßÌåµÄÖµÊÇ¿ÉÒÔ + //¼Ç¼µÄ¶ÓÁкÍÐźÅÁ¿×î´óÊýÄ¿¡£ +#define configCHECK_FOR_STACK_OVERFLOW 0 //´óÓÚ0ʱÆôÓöÑÕ»Òç³ö¼ì²â¹¦ÄÜ£¬Èç¹ûʹÓô˹¦ÄÜ + //Óû§±ØÐëÌṩһ¸öÕ»Òç³ö¹³×Óº¯Êý£¬Èç¹ûʹÓõĻ° + //´ËÖµ¿ÉÒÔΪ1»òÕß2£¬ÒòΪÓÐÁ½ÖÖÕ»Òç³ö¼ì²â·½·¨¡£ +#define configUSE_RECURSIVE_MUTEXES 1 //Ϊ1ʱʹÓõݹ黥³âÐźÅÁ¿ +#define configUSE_MALLOC_FAILED_HOOK 0 //1ʹÓÃÄÚ´æÉêÇëʧ°Ü¹³×Óº¯Êý +#define configUSE_APPLICATION_TASK_TAG 0 +#define configUSE_COUNTING_SEMAPHORES 1 //Ϊ1ʱʹÓüÆÊýÐźÅÁ¿ + +/***************************************************************************************************************/ +/* FreeRTOSÓëÄÚ´æÉêÇëÓйØÅäÖÃÑ¡Ïî */ +/***************************************************************************************************************/ +#define configSUPPORT_DYNAMIC_ALLOCATION 1 //Ö§³Ö¶¯Ì¬ÄÚ´æÉêÇë +#define configTOTAL_HEAP_SIZE ((size_t)(20*1024)) //ϵͳËùÓÐ×ܵĶѴóС + +/***************************************************************************************************************/ +/* FreeRTOSÓë¹³×Óº¯ÊýÓйصÄÅäÖÃÑ¡Ïî */ +/***************************************************************************************************************/ +#define configUSE_IDLE_HOOK 0 //1£¬Ê¹ÓÿÕÏй³×Ó£»0£¬²»Ê¹Óà +#define configUSE_TICK_HOOK 0 //1£¬Ê¹ÓÃʱ¼äƬ¹³×Ó£»0£¬²»Ê¹Óà + +/***************************************************************************************************************/ +/* FreeRTOSÓëÔËÐÐʱ¼äºÍÈÎÎñ״̬ÊÕ¼¯ÓйصÄÅäÖÃÑ¡Ïî */ +/***************************************************************************************************************/ +#define configGENERATE_RUN_TIME_STATS 0 //Ϊ1ʱÆôÓÃÔËÐÐʱ¼äͳ¼Æ¹¦ÄÜ +#define configUSE_TRACE_FACILITY 1 //Ϊ1ÆôÓÿÉÊÓ»¯¸ú×Ùµ÷ÊÔ +#define configUSE_STATS_FORMATTING_FUNCTIONS 1 //ÓëºêconfigUSE_TRACE_FACILITYͬʱΪ1ʱ»á±àÒëÏÂÃæ3¸öº¯Êý + //prvWriteNameToBuffer(),vTaskList(), + //vTaskGetRunTimeStats() + +/***************************************************************************************************************/ +/* FreeRTOSÓëЭ³ÌÓйصÄÅäÖÃÑ¡Ïî */ +/***************************************************************************************************************/ +#define configUSE_CO_ROUTINES 0 //Ϊ1ʱÆôÓÃЭ³Ì£¬ÆôÓÃЭ³ÌÒÔºó±ØÐëÌí¼ÓÎļþcroutine.c +#define configMAX_CO_ROUTINE_PRIORITIES ( 2 ) //Э³ÌµÄÓÐЧÓÅÏȼ¶ÊýÄ¿ + +/***************************************************************************************************************/ +/* FreeRTOSÓëÈí¼þ¶¨Ê±Æ÷ÓйصÄÅäÖÃÑ¡Ïî */ +/***************************************************************************************************************/ +#define configUSE_TIMERS 1 //Ϊ1ʱÆôÓÃÈí¼þ¶¨Ê±Æ÷ +#define configTIMER_TASK_PRIORITY (configMAX_PRIORITIES-1) //Èí¼þ¶¨Ê±Æ÷ÓÅÏȼ¶ +#define configTIMER_QUEUE_LENGTH 5 //Èí¼þ¶¨Ê±Æ÷¶ÓÁг¤¶È +#define configTIMER_TASK_STACK_DEPTH (configMINIMAL_STACK_SIZE*2) //Èí¼þ¶¨Ê±Æ÷ÈÎÎñ¶ÑÕ»´óС + +/***************************************************************************************************************/ +/* FreeRTOS¿ÉÑ¡º¯ÊýÅäÖÃÑ¡Ïî */ +/***************************************************************************************************************/ +#define INCLUDE_xTaskGetSchedulerState 1 +#define INCLUDE_vTaskPrioritySet 1 +#define INCLUDE_uxTaskPriorityGet 1 +#define INCLUDE_vTaskDelete 1 +#define INCLUDE_vTaskCleanUpResources 1 +#define INCLUDE_vTaskSuspend 1 +#define INCLUDE_vTaskDelayUntil 1 +#define INCLUDE_vTaskDelay 1 +#define INCLUDE_eTaskGetState 1 +#define INCLUDE_xTimerPendFunctionCall 1 + +/***************************************************************************************************************/ +/* FreeRTOSÓëÖжÏÓйصÄÅäÖÃÑ¡Ïî */ +/***************************************************************************************************************/ +#ifdef __NVIC_PRIO_BITS + #define configPRIO_BITS __NVIC_PRIO_BITS +#else + #define configPRIO_BITS 4 +#endif + +#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 15 //ÖжÏ×îµÍÓÅÏȼ¶ +#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5 //ϵͳ¿É¹ÜÀíµÄ×î¸ßÖжÏÓÅÏȼ¶ +#define configKERNEL_INTERRUPT_PRIORITY ( configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) +#define configMAX_SYSCALL_INTERRUPT_PRIORITY ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) ) + +/***************************************************************************************************************/ +/* FreeRTOSÓëÖжϷþÎñº¯ÊýÓйصÄÅäÖÃÑ¡Ïî */ +/***************************************************************************************************************/ +#define xPortPendSVHandler PendSV_Handler +#define vPortSVCHandler SVC_Handler + +#endif /* FREERTOS_CONFIG_H */ + diff --git a/Program/XLLC/FreeRTOS/include/StackMacros.h b/Program/XLLC/FreeRTOS/include/StackMacros.h new file mode 100644 index 0000000000000000000000000000000000000000..914c48f3bbe03076644c4d14fcd4f596fc935823 --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/StackMacros.h @@ -0,0 +1,171 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +#ifndef STACK_MACROS_H +#define STACK_MACROS_H + +/* + * Call the stack overflow hook function if the stack of the task being swapped + * out is currently overflowed, or looks like it might have overflowed in the + * past. + * + * Setting configCHECK_FOR_STACK_OVERFLOW to 1 will cause the macro to check + * the current stack state only - comparing the current top of stack value to + * the stack limit. Setting configCHECK_FOR_STACK_OVERFLOW to greater than 1 + * will also cause the last few stack bytes to be checked to ensure the value + * to which the bytes were set when the task was created have not been + * overwritten. Note this second test does not guarantee that an overflowed + * stack will always be recognised. + */ + +/*-----------------------------------------------------------*/ + +#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH < 0 ) ) + + /* Only the current stack state is to be checked. */ + #define taskCHECK_FOR_STACK_OVERFLOW() \ + { \ + /* Is the currently saved stack pointer within the stack limit? */ \ + if( pxCurrentTCB->pxTopOfStack <= pxCurrentTCB->pxStack ) \ + { \ + vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \ + } \ + } + +#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */ +/*-----------------------------------------------------------*/ + +#if( ( configCHECK_FOR_STACK_OVERFLOW == 1 ) && ( portSTACK_GROWTH > 0 ) ) + + /* Only the current stack state is to be checked. */ + #define taskCHECK_FOR_STACK_OVERFLOW() \ + { \ + \ + /* Is the currently saved stack pointer within the stack limit? */ \ + if( pxCurrentTCB->pxTopOfStack >= pxCurrentTCB->pxEndOfStack ) \ + { \ + vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \ + } \ + } + +#endif /* configCHECK_FOR_STACK_OVERFLOW == 1 */ +/*-----------------------------------------------------------*/ + +#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH < 0 ) ) + + #define taskCHECK_FOR_STACK_OVERFLOW() \ + { \ + const uint32_t * const pulStack = ( uint32_t * ) pxCurrentTCB->pxStack; \ + const uint32_t ulCheckValue = ( uint32_t ) 0xa5a5a5a5; \ + \ + if( ( pulStack[ 0 ] != ulCheckValue ) || \ + ( pulStack[ 1 ] != ulCheckValue ) || \ + ( pulStack[ 2 ] != ulCheckValue ) || \ + ( pulStack[ 3 ] != ulCheckValue ) ) \ + { \ + vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \ + } \ + } + +#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */ +/*-----------------------------------------------------------*/ + +#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) && ( portSTACK_GROWTH > 0 ) ) + + #define taskCHECK_FOR_STACK_OVERFLOW() \ + { \ + int8_t *pcEndOfStack = ( int8_t * ) pxCurrentTCB->pxEndOfStack; \ + static const uint8_t ucExpectedStackBytes[] = { tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \ + tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \ + tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \ + tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, \ + tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE, tskSTACK_FILL_BYTE }; \ + \ + \ + pcEndOfStack -= sizeof( ucExpectedStackBytes ); \ + \ + /* Has the extremity of the task stack ever been written over? */ \ + if( memcmp( ( void * ) pcEndOfStack, ( void * ) ucExpectedStackBytes, sizeof( ucExpectedStackBytes ) ) != 0 ) \ + { \ + vApplicationStackOverflowHook( ( TaskHandle_t ) pxCurrentTCB, pxCurrentTCB->pcTaskName ); \ + } \ + } + +#endif /* #if( configCHECK_FOR_STACK_OVERFLOW > 1 ) */ +/*-----------------------------------------------------------*/ + +/* Remove stack overflow macro if not being used. */ +#ifndef taskCHECK_FOR_STACK_OVERFLOW + #define taskCHECK_FOR_STACK_OVERFLOW() +#endif + + + +#endif /* STACK_MACROS_H */ + diff --git a/Program/XLLC/FreeRTOS/include/croutine.h b/Program/XLLC/FreeRTOS/include/croutine.h new file mode 100644 index 0000000000000000000000000000000000000000..de66545366a9e1d42cf45a6c774b41069599315f --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/croutine.h @@ -0,0 +1,762 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +#ifndef CO_ROUTINE_H +#define CO_ROUTINE_H + +#ifndef INC_FREERTOS_H + #error "include FreeRTOS.h must appear in source files before include croutine.h" +#endif + +#include "list.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* Used to hide the implementation of the co-routine control block. The +control block structure however has to be included in the header due to +the macro implementation of the co-routine functionality. */ +typedef void * CoRoutineHandle_t; + +/* Defines the prototype to which co-routine functions must conform. */ +typedef void (*crCOROUTINE_CODE)( CoRoutineHandle_t, UBaseType_t ); + +typedef struct corCoRoutineControlBlock +{ + crCOROUTINE_CODE pxCoRoutineFunction; + ListItem_t xGenericListItem; /*< List item used to place the CRCB in ready and blocked queues. */ + ListItem_t xEventListItem; /*< List item used to place the CRCB in event lists. */ + UBaseType_t uxPriority; /*< The priority of the co-routine in relation to other co-routines. */ + UBaseType_t uxIndex; /*< Used to distinguish between co-routines when multiple co-routines use the same co-routine function. */ + uint16_t uxState; /*< Used internally by the co-routine implementation. */ +} CRCB_t; /* Co-routine control block. Note must be identical in size down to uxPriority with TCB_t. */ + +/** + * croutine. h + *
+ BaseType_t xCoRoutineCreate(
+                                 crCOROUTINE_CODE pxCoRoutineCode,
+                                 UBaseType_t uxPriority,
+                                 UBaseType_t uxIndex
+                               );
+ * + * Create a new co-routine and add it to the list of co-routines that are + * ready to run. + * + * @param pxCoRoutineCode Pointer to the co-routine function. Co-routine + * functions require special syntax - see the co-routine section of the WEB + * documentation for more information. + * + * @param uxPriority The priority with respect to other co-routines at which + * the co-routine will run. + * + * @param uxIndex Used to distinguish between different co-routines that + * execute the same function. See the example below and the co-routine section + * of the WEB documentation for further information. + * + * @return pdPASS if the co-routine was successfully created and added to a ready + * list, otherwise an error code defined with ProjDefs.h. + * + * Example usage: + 
+ // Co-routine to be created.
+ void vFlashCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ // This may not be necessary for const variables.
+ static const char cLedToFlash[ 2 ] = { 5, 6 };
+ static const TickType_t uxFlashRates[ 2 ] = { 200, 400 };
+
+     // Must start every co-routine with a call to crSTART();
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+         // This co-routine just delays for a fixed period, then toggles
+         // an LED.  Two co-routines are created using this function, so
+         // the uxIndex parameter is used to tell the co-routine which
+         // LED to flash and how int32_t to delay.  This assumes xQueue has
+         // already been created.
+         vParTestToggleLED( cLedToFlash[ uxIndex ] );
+         crDELAY( xHandle, uxFlashRates[ uxIndex ] );
+     }
+
+     // Must end every co-routine with a call to crEND();
+     crEND();
+ }
+
+ // Function that creates two co-routines.
+ void vOtherFunction( void )
+ {
+ uint8_t ucParameterToPass;
+ TaskHandle_t xHandle;
+
+     // Create two co-routines at priority 0.  The first is given index 0
+     // so (from the code above) toggles LED 5 every 200 ticks.  The second
+     // is given index 1 so toggles LED 6 every 400 ticks.
+     for( uxIndex = 0; uxIndex < 2; uxIndex++ )
+     {
+         xCoRoutineCreate( vFlashCoRoutine, 0, uxIndex );
+     }
+ }
+
+ * \defgroup xCoRoutineCreate xCoRoutineCreate + * \ingroup Tasks + */ +BaseType_t xCoRoutineCreate( crCOROUTINE_CODE pxCoRoutineCode, UBaseType_t uxPriority, UBaseType_t uxIndex ); + + +/** + * croutine. h + *
+ void vCoRoutineSchedule( void );
+ * + * Run a co-routine. + * + * vCoRoutineSchedule() executes the highest priority co-routine that is able + * to run. The co-routine will execute until it either blocks, yields or is + * preempted by a task. Co-routines execute cooperatively so one + * co-routine cannot be preempted by another, but can be preempted by a task. + * + * If an application comprises of both tasks and co-routines then + * vCoRoutineSchedule should be called from the idle task (in an idle task + * hook). + * + * Example usage: + 
+ // This idle task hook will schedule a co-routine each time it is called.
+ // The rest of the idle task will execute between co-routine calls.
+ void vApplicationIdleHook( void )
+ {
+	vCoRoutineSchedule();
+ }
+
+ // Alternatively, if you do not require any other part of the idle task to
+ // execute, the idle task hook can call vCoRoutineScheduler() within an
+ // infinite loop.
+ void vApplicationIdleHook( void )
+ {
+    for( ;; )
+    {
+        vCoRoutineSchedule();
+    }
+ }
+
+ * \defgroup vCoRoutineSchedule vCoRoutineSchedule + * \ingroup Tasks + */ +void vCoRoutineSchedule( void ); + +/** + * croutine. h + * 
+ crSTART( CoRoutineHandle_t xHandle );
+ * + * This macro MUST always be called at the start of a co-routine function. + * + * Example usage: + 
+ // Co-routine to be created.
+ void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static int32_t ulAVariable;
+
+     // Must start every co-routine with a call to crSTART();
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+          // Co-routine functionality goes here.
+     }
+
+     // Must end every co-routine with a call to crEND();
+     crEND();
+ }
+ * \defgroup crSTART crSTART + * \ingroup Tasks + */ +#define crSTART( pxCRCB ) switch( ( ( CRCB_t * )( pxCRCB ) )->uxState ) { case 0: + +/** + * croutine. h + * 
+ crEND();
+ * + * This macro MUST always be called at the end of a co-routine function. + * + * Example usage: + 
+ // Co-routine to be created.
+ void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static int32_t ulAVariable;
+
+     // Must start every co-routine with a call to crSTART();
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+          // Co-routine functionality goes here.
+     }
+
+     // Must end every co-routine with a call to crEND();
+     crEND();
+ }
+ * \defgroup crSTART crSTART + * \ingroup Tasks + */ +#define crEND() } + +/* + * These macros are intended for internal use by the co-routine implementation + * only. The macros should not be used directly by application writers. + */ +#define crSET_STATE0( xHandle ) ( ( CRCB_t * )( xHandle ) )->uxState = (__LINE__ * 2); return; case (__LINE__ * 2): +#define crSET_STATE1( xHandle ) ( ( CRCB_t * )( xHandle ) )->uxState = ((__LINE__ * 2)+1); return; case ((__LINE__ * 2)+1): + +/** + * croutine. h + *
+ crDELAY( CoRoutineHandle_t xHandle, TickType_t xTicksToDelay );
+ * + * Delay a co-routine for a fixed period of time. + * + * crDELAY can only be called from the co-routine function itself - not + * from within a function called by the co-routine function. This is because + * co-routines do not maintain their own stack. + * + * @param xHandle The handle of the co-routine to delay. This is the xHandle + * parameter of the co-routine function. + * + * @param xTickToDelay The number of ticks that the co-routine should delay + * for. The actual amount of time this equates to is defined by + * configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant portTICK_PERIOD_MS + * can be used to convert ticks to milliseconds. + * + * Example usage: + 
+ // Co-routine to be created.
+ void vACoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ // This may not be necessary for const variables.
+ // We are to delay for 200ms.
+ static const xTickType xDelayTime = 200 / portTICK_PERIOD_MS;
+
+     // Must start every co-routine with a call to crSTART();
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+        // Delay for 200ms.
+        crDELAY( xHandle, xDelayTime );
+
+        // Do something here.
+     }
+
+     // Must end every co-routine with a call to crEND();
+     crEND();
+ }
+ * \defgroup crDELAY crDELAY + * \ingroup Tasks + */ +#define crDELAY( xHandle, xTicksToDelay ) \ + if( ( xTicksToDelay ) > 0 ) \ + { \ + vCoRoutineAddToDelayedList( ( xTicksToDelay ), NULL ); \ + } \ + crSET_STATE0( ( xHandle ) ); + +/** + * 
+ crQUEUE_SEND(
+                  CoRoutineHandle_t xHandle,
+                  QueueHandle_t pxQueue,
+                  void *pvItemToQueue,
+                  TickType_t xTicksToWait,
+                  BaseType_t *pxResult
+             )
+ * + * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine + * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks. + * + * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas + * xQueueSend() and xQueueReceive() can only be used from tasks. + * + * crQUEUE_SEND can only be called from the co-routine function itself - not + * from within a function called by the co-routine function. This is because + * co-routines do not maintain their own stack. + * + * See the co-routine section of the WEB documentation for information on + * passing data between tasks and co-routines and between ISR's and + * co-routines. + * + * @param xHandle The handle of the calling co-routine. This is the xHandle + * parameter of the co-routine function. + * + * @param pxQueue The handle of the queue on which the data will be posted. + * The handle is obtained as the return value when the queue is created using + * the xQueueCreate() API function. + * + * @param pvItemToQueue A pointer to the data being posted onto the queue. + * The number of bytes of each queued item is specified when the queue is + * created. This number of bytes is copied from pvItemToQueue into the queue + * itself. + * + * @param xTickToDelay The number of ticks that the co-routine should block + * to wait for space to become available on the queue, should space not be + * available immediately. The actual amount of time this equates to is defined + * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant + * portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see example + * below). + * + * @param pxResult The variable pointed to by pxResult will be set to pdPASS if + * data was successfully posted onto the queue, otherwise it will be set to an + * error defined within ProjDefs.h. + * + * Example usage: + 
+ // Co-routine function that blocks for a fixed period then posts a number onto
+ // a queue.
+ static void prvCoRoutineFlashTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static BaseType_t xNumberToPost = 0;
+ static BaseType_t xResult;
+
+    // Co-routines must begin with a call to crSTART().
+    crSTART( xHandle );
+
+    for( ;; )
+    {
+        // This assumes the queue has already been created.
+        crQUEUE_SEND( xHandle, xCoRoutineQueue, &xNumberToPost, NO_DELAY, &xResult );
+
+        if( xResult != pdPASS )
+        {
+            // The message was not posted!
+        }
+
+        // Increment the number to be posted onto the queue.
+        xNumberToPost++;
+
+        // Delay for 100 ticks.
+        crDELAY( xHandle, 100 );
+    }
+
+    // Co-routines must end with a call to crEND().
+    crEND();
+ }
+ * \defgroup crQUEUE_SEND crQUEUE_SEND + * \ingroup Tasks + */ +#define crQUEUE_SEND( xHandle, pxQueue, pvItemToQueue, xTicksToWait, pxResult ) \ +{ \ + *( pxResult ) = xQueueCRSend( ( pxQueue) , ( pvItemToQueue) , ( xTicksToWait ) ); \ + if( *( pxResult ) == errQUEUE_BLOCKED ) \ + { \ + crSET_STATE0( ( xHandle ) ); \ + *pxResult = xQueueCRSend( ( pxQueue ), ( pvItemToQueue ), 0 ); \ + } \ + if( *pxResult == errQUEUE_YIELD ) \ + { \ + crSET_STATE1( ( xHandle ) ); \ + *pxResult = pdPASS; \ + } \ +} + +/** + * croutine. h + * 
+  crQUEUE_RECEIVE(
+                     CoRoutineHandle_t xHandle,
+                     QueueHandle_t pxQueue,
+                     void *pvBuffer,
+                     TickType_t xTicksToWait,
+                     BaseType_t *pxResult
+                 )
+ * + * The macro's crQUEUE_SEND() and crQUEUE_RECEIVE() are the co-routine + * equivalent to the xQueueSend() and xQueueReceive() functions used by tasks. + * + * crQUEUE_SEND and crQUEUE_RECEIVE can only be used from a co-routine whereas + * xQueueSend() and xQueueReceive() can only be used from tasks. + * + * crQUEUE_RECEIVE can only be called from the co-routine function itself - not + * from within a function called by the co-routine function. This is because + * co-routines do not maintain their own stack. + * + * See the co-routine section of the WEB documentation for information on + * passing data between tasks and co-routines and between ISR's and + * co-routines. + * + * @param xHandle The handle of the calling co-routine. This is the xHandle + * parameter of the co-routine function. + * + * @param pxQueue The handle of the queue from which the data will be received. + * The handle is obtained as the return value when the queue is created using + * the xQueueCreate() API function. + * + * @param pvBuffer The buffer into which the received item is to be copied. + * The number of bytes of each queued item is specified when the queue is + * created. This number of bytes is copied into pvBuffer. + * + * @param xTickToDelay The number of ticks that the co-routine should block + * to wait for data to become available from the queue, should data not be + * available immediately. The actual amount of time this equates to is defined + * by configTICK_RATE_HZ (set in FreeRTOSConfig.h). The constant + * portTICK_PERIOD_MS can be used to convert ticks to milliseconds (see the + * crQUEUE_SEND example). + * + * @param pxResult The variable pointed to by pxResult will be set to pdPASS if + * data was successfully retrieved from the queue, otherwise it will be set to + * an error code as defined within ProjDefs.h. + * + * Example usage: + 
+ // A co-routine receives the number of an LED to flash from a queue.  It
+ // blocks on the queue until the number is received.
+ static void prvCoRoutineFlashWorkTask( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // Variables in co-routines must be declared static if they must maintain value across a blocking call.
+ static BaseType_t xResult;
+ static UBaseType_t uxLEDToFlash;
+
+    // All co-routines must start with a call to crSTART().
+    crSTART( xHandle );
+
+    for( ;; )
+    {
+        // Wait for data to become available on the queue.
+        crQUEUE_RECEIVE( xHandle, xCoRoutineQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
+
+        if( xResult == pdPASS )
+        {
+            // We received the LED to flash - flash it!
+            vParTestToggleLED( uxLEDToFlash );
+        }
+    }
+
+    crEND();
+ }
+ * \defgroup crQUEUE_RECEIVE crQUEUE_RECEIVE + * \ingroup Tasks + */ +#define crQUEUE_RECEIVE( xHandle, pxQueue, pvBuffer, xTicksToWait, pxResult ) \ +{ \ + *( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), ( xTicksToWait ) ); \ + if( *( pxResult ) == errQUEUE_BLOCKED ) \ + { \ + crSET_STATE0( ( xHandle ) ); \ + *( pxResult ) = xQueueCRReceive( ( pxQueue) , ( pvBuffer ), 0 ); \ + } \ + if( *( pxResult ) == errQUEUE_YIELD ) \ + { \ + crSET_STATE1( ( xHandle ) ); \ + *( pxResult ) = pdPASS; \ + } \ +} + +/** + * croutine. h + * 
+  crQUEUE_SEND_FROM_ISR(
+                            QueueHandle_t pxQueue,
+                            void *pvItemToQueue,
+                            BaseType_t xCoRoutinePreviouslyWoken
+                       )
+ * + * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the + * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR() + * functions used by tasks. + * + * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to + * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and + * xQueueReceiveFromISR() can only be used to pass data between a task and and + * ISR. + * + * crQUEUE_SEND_FROM_ISR can only be called from an ISR to send data to a queue + * that is being used from within a co-routine. + * + * See the co-routine section of the WEB documentation for information on + * passing data between tasks and co-routines and between ISR's and + * co-routines. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @param xCoRoutinePreviouslyWoken This is included so an ISR can post onto + * the same queue multiple times from a single interrupt. The first call + * should always pass in pdFALSE. Subsequent calls should pass in + * the value returned from the previous call. + * + * @return pdTRUE if a co-routine was woken by posting onto the queue. This is + * used by the ISR to determine if a context switch may be required following + * the ISR. + * + * Example usage: + 
+ // A co-routine that blocks on a queue waiting for characters to be received.
+ static void vReceivingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ char cRxedChar;
+ BaseType_t xResult;
+
+     // All co-routines must start with a call to crSTART().
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+         // Wait for data to become available on the queue.  This assumes the
+         // queue xCommsRxQueue has already been created!
+         crQUEUE_RECEIVE( xHandle, xCommsRxQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
+
+         // Was a character received?
+         if( xResult == pdPASS )
+         {
+             // Process the character here.
+         }
+     }
+
+     // All co-routines must end with a call to crEND().
+     crEND();
+ }
+
+ // An ISR that uses a queue to send characters received on a serial port to
+ // a co-routine.
+ void vUART_ISR( void )
+ {
+ char cRxedChar;
+ BaseType_t xCRWokenByPost = pdFALSE;
+
+     // We loop around reading characters until there are none left in the UART.
+     while( UART_RX_REG_NOT_EMPTY() )
+     {
+         // Obtain the character from the UART.
+         cRxedChar = UART_RX_REG;
+
+         // Post the character onto a queue.  xCRWokenByPost will be pdFALSE
+         // the first time around the loop.  If the post causes a co-routine
+         // to be woken (unblocked) then xCRWokenByPost will be set to pdTRUE.
+         // In this manner we can ensure that if more than one co-routine is
+         // blocked on the queue only one is woken by this ISR no matter how
+         // many characters are posted to the queue.
+         xCRWokenByPost = crQUEUE_SEND_FROM_ISR( xCommsRxQueue, &cRxedChar, xCRWokenByPost );
+     }
+ }
+ * \defgroup crQUEUE_SEND_FROM_ISR crQUEUE_SEND_FROM_ISR + * \ingroup Tasks + */ +#define crQUEUE_SEND_FROM_ISR( pxQueue, pvItemToQueue, xCoRoutinePreviouslyWoken ) xQueueCRSendFromISR( ( pxQueue ), ( pvItemToQueue ), ( xCoRoutinePreviouslyWoken ) ) + + +/** + * croutine. h + * 
+  crQUEUE_SEND_FROM_ISR(
+                            QueueHandle_t pxQueue,
+                            void *pvBuffer,
+                            BaseType_t * pxCoRoutineWoken
+                       )
+ * + * The macro's crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() are the + * co-routine equivalent to the xQueueSendFromISR() and xQueueReceiveFromISR() + * functions used by tasks. + * + * crQUEUE_SEND_FROM_ISR() and crQUEUE_RECEIVE_FROM_ISR() can only be used to + * pass data between a co-routine and and ISR, whereas xQueueSendFromISR() and + * xQueueReceiveFromISR() can only be used to pass data between a task and and + * ISR. + * + * crQUEUE_RECEIVE_FROM_ISR can only be called from an ISR to receive data + * from a queue that is being used from within a co-routine (a co-routine + * posted to the queue). + * + * See the co-routine section of the WEB documentation for information on + * passing data between tasks and co-routines and between ISR's and + * co-routines. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvBuffer A pointer to a buffer into which the received item will be + * placed. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from the queue into + * pvBuffer. + * + * @param pxCoRoutineWoken A co-routine may be blocked waiting for space to become + * available on the queue. If crQUEUE_RECEIVE_FROM_ISR causes such a + * co-routine to unblock *pxCoRoutineWoken will get set to pdTRUE, otherwise + * *pxCoRoutineWoken will remain unchanged. + * + * @return pdTRUE an item was successfully received from the queue, otherwise + * pdFALSE. + * + * Example usage: + 
+ // A co-routine that posts a character to a queue then blocks for a fixed
+ // period.  The character is incremented each time.
+ static void vSendingCoRoutine( CoRoutineHandle_t xHandle, UBaseType_t uxIndex )
+ {
+ // cChar holds its value while this co-routine is blocked and must therefore
+ // be declared static.
+ static char cCharToTx = 'a';
+ BaseType_t xResult;
+
+     // All co-routines must start with a call to crSTART().
+     crSTART( xHandle );
+
+     for( ;; )
+     {
+         // Send the next character to the queue.
+         crQUEUE_SEND( xHandle, xCoRoutineQueue, &cCharToTx, NO_DELAY, &xResult );
+
+         if( xResult == pdPASS )
+         {
+             // The character was successfully posted to the queue.
+         }
+		 else
+		 {
+			// Could not post the character to the queue.
+		 }
+
+         // Enable the UART Tx interrupt to cause an interrupt in this
+		 // hypothetical UART.  The interrupt will obtain the character
+		 // from the queue and send it.
+		 ENABLE_RX_INTERRUPT();
+
+		 // Increment to the next character then block for a fixed period.
+		 // cCharToTx will maintain its value across the delay as it is
+		 // declared static.
+		 cCharToTx++;
+		 if( cCharToTx > 'x' )
+		 {
+			cCharToTx = 'a';
+		 }
+		 crDELAY( 100 );
+     }
+
+     // All co-routines must end with a call to crEND().
+     crEND();
+ }
+
+ // An ISR that uses a queue to receive characters to send on a UART.
+ void vUART_ISR( void )
+ {
+ char cCharToTx;
+ BaseType_t xCRWokenByPost = pdFALSE;
+
+     while( UART_TX_REG_EMPTY() )
+     {
+         // Are there any characters in the queue waiting to be sent?
+		 // xCRWokenByPost will automatically be set to pdTRUE if a co-routine
+		 // is woken by the post - ensuring that only a single co-routine is
+		 // woken no matter how many times we go around this loop.
+         if( crQUEUE_RECEIVE_FROM_ISR( pxQueue, &cCharToTx, &xCRWokenByPost ) )
+		 {
+			 SEND_CHARACTER( cCharToTx );
+		 }
+     }
+ }
+ * \defgroup crQUEUE_RECEIVE_FROM_ISR crQUEUE_RECEIVE_FROM_ISR + * \ingroup Tasks + */ +#define crQUEUE_RECEIVE_FROM_ISR( pxQueue, pvBuffer, pxCoRoutineWoken ) xQueueCRReceiveFromISR( ( pxQueue ), ( pvBuffer ), ( pxCoRoutineWoken ) ) + +/* + * This function is intended for internal use by the co-routine macros only. + * The macro nature of the co-routine implementation requires that the + * prototype appears here. The function should not be used by application + * writers. + * + * Removes the current co-routine from its ready list and places it in the + * appropriate delayed list. + */ +void vCoRoutineAddToDelayedList( TickType_t xTicksToDelay, List_t *pxEventList ); + +/* + * This function is intended for internal use by the queue implementation only. + * The function should not be used by application writers. + * + * Removes the highest priority co-routine from the event list and places it in + * the pending ready list. + */ +BaseType_t xCoRoutineRemoveFromEventList( const List_t *pxEventList ); + +#ifdef __cplusplus +} +#endif + +#endif /* CO_ROUTINE_H */ diff --git a/Program/XLLC/FreeRTOS/include/deprecated_definitions.h b/Program/XLLC/FreeRTOS/include/deprecated_definitions.h new file mode 100644 index 0000000000000000000000000000000000000000..681998c7f0ff6308bf03ab48a056c59441ef9480 --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/deprecated_definitions.h @@ -0,0 +1,321 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +#ifndef DEPRECATED_DEFINITIONS_H +#define DEPRECATED_DEFINITIONS_H + + +/* Each FreeRTOS port has a unique portmacro.h header file. Originally a +pre-processor definition was used to ensure the pre-processor found the correct +portmacro.h file for the port being used. That scheme was deprecated in favour +of setting the compiler's include path such that it found the correct +portmacro.h file - removing the need for the constant and allowing the +portmacro.h file to be located anywhere in relation to the port being used. The +definitions below remain in the code for backward compatibility only. New +projects should not use them. */ + +#ifdef OPEN_WATCOM_INDUSTRIAL_PC_PORT + #include "..\..\Source\portable\owatcom\16bitdos\pc\portmacro.h" + typedef void ( __interrupt __far *pxISR )(); +#endif + +#ifdef OPEN_WATCOM_FLASH_LITE_186_PORT + #include "..\..\Source\portable\owatcom\16bitdos\flsh186\portmacro.h" + typedef void ( __interrupt __far *pxISR )(); +#endif + +#ifdef GCC_MEGA_AVR + #include "../portable/GCC/ATMega323/portmacro.h" +#endif + +#ifdef IAR_MEGA_AVR + #include "../portable/IAR/ATMega323/portmacro.h" +#endif + +#ifdef MPLAB_PIC24_PORT + #include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h" +#endif + +#ifdef MPLAB_DSPIC_PORT + #include "../../Source/portable/MPLAB/PIC24_dsPIC/portmacro.h" +#endif + +#ifdef MPLAB_PIC18F_PORT + #include "../../Source/portable/MPLAB/PIC18F/portmacro.h" +#endif + +#ifdef MPLAB_PIC32MX_PORT + #include "../../Source/portable/MPLAB/PIC32MX/portmacro.h" +#endif + +#ifdef _FEDPICC + #include "libFreeRTOS/Include/portmacro.h" +#endif + +#ifdef SDCC_CYGNAL + #include "../../Source/portable/SDCC/Cygnal/portmacro.h" +#endif + +#ifdef GCC_ARM7 + #include "../../Source/portable/GCC/ARM7_LPC2000/portmacro.h" +#endif + +#ifdef GCC_ARM7_ECLIPSE + #include "portmacro.h" +#endif + +#ifdef ROWLEY_LPC23xx + #include "../../Source/portable/GCC/ARM7_LPC23xx/portmacro.h" +#endif + +#ifdef IAR_MSP430 + #include "..\..\Source\portable\IAR\MSP430\portmacro.h" +#endif + +#ifdef GCC_MSP430 + #include "../../Source/portable/GCC/MSP430F449/portmacro.h" +#endif + +#ifdef ROWLEY_MSP430 + #include "../../Source/portable/Rowley/MSP430F449/portmacro.h" +#endif + +#ifdef ARM7_LPC21xx_KEIL_RVDS + #include "..\..\Source\portable\RVDS\ARM7_LPC21xx\portmacro.h" +#endif + +#ifdef SAM7_GCC + #include "../../Source/portable/GCC/ARM7_AT91SAM7S/portmacro.h" +#endif + +#ifdef SAM7_IAR + #include "..\..\Source\portable\IAR\AtmelSAM7S64\portmacro.h" +#endif + +#ifdef SAM9XE_IAR + #include "..\..\Source\portable\IAR\AtmelSAM9XE\portmacro.h" +#endif + +#ifdef LPC2000_IAR + #include "..\..\Source\portable\IAR\LPC2000\portmacro.h" +#endif + +#ifdef STR71X_IAR + #include "..\..\Source\portable\IAR\STR71x\portmacro.h" +#endif + +#ifdef STR75X_IAR + #include "..\..\Source\portable\IAR\STR75x\portmacro.h" +#endif + +#ifdef STR75X_GCC + #include "..\..\Source\portable\GCC\STR75x\portmacro.h" +#endif + +#ifdef STR91X_IAR + #include "..\..\Source\portable\IAR\STR91x\portmacro.h" +#endif + +#ifdef GCC_H8S + #include "../../Source/portable/GCC/H8S2329/portmacro.h" +#endif + +#ifdef GCC_AT91FR40008 + #include "../../Source/portable/GCC/ARM7_AT91FR40008/portmacro.h" +#endif + +#ifdef RVDS_ARMCM3_LM3S102 + #include "../../Source/portable/RVDS/ARM_CM3/portmacro.h" +#endif + +#ifdef GCC_ARMCM3_LM3S102 + #include "../../Source/portable/GCC/ARM_CM3/portmacro.h" +#endif + +#ifdef GCC_ARMCM3 + #include "../../Source/portable/GCC/ARM_CM3/portmacro.h" +#endif + +#ifdef IAR_ARM_CM3 + #include "../../Source/portable/IAR/ARM_CM3/portmacro.h" +#endif + +#ifdef IAR_ARMCM3_LM + #include "../../Source/portable/IAR/ARM_CM3/portmacro.h" +#endif + +#ifdef HCS12_CODE_WARRIOR + #include "../../Source/portable/CodeWarrior/HCS12/portmacro.h" +#endif + +#ifdef MICROBLAZE_GCC + #include "../../Source/portable/GCC/MicroBlaze/portmacro.h" +#endif + +#ifdef TERN_EE + #include "..\..\Source\portable\Paradigm\Tern_EE\small\portmacro.h" +#endif + +#ifdef GCC_HCS12 + #include "../../Source/portable/GCC/HCS12/portmacro.h" +#endif + +#ifdef GCC_MCF5235 + #include "../../Source/portable/GCC/MCF5235/portmacro.h" +#endif + +#ifdef COLDFIRE_V2_GCC + #include "../../../Source/portable/GCC/ColdFire_V2/portmacro.h" +#endif + +#ifdef COLDFIRE_V2_CODEWARRIOR + #include "../../Source/portable/CodeWarrior/ColdFire_V2/portmacro.h" +#endif + +#ifdef GCC_PPC405 + #include "../../Source/portable/GCC/PPC405_Xilinx/portmacro.h" +#endif + +#ifdef GCC_PPC440 + #include "../../Source/portable/GCC/PPC440_Xilinx/portmacro.h" +#endif + +#ifdef _16FX_SOFTUNE + #include "..\..\Source\portable\Softune\MB96340\portmacro.h" +#endif + +#ifdef BCC_INDUSTRIAL_PC_PORT + /* A short file name has to be used in place of the normal + FreeRTOSConfig.h when using the Borland compiler. */ + #include "frconfig.h" + #include "..\portable\BCC\16BitDOS\PC\prtmacro.h" + typedef void ( __interrupt __far *pxISR )(); +#endif + +#ifdef BCC_FLASH_LITE_186_PORT + /* A short file name has to be used in place of the normal + FreeRTOSConfig.h when using the Borland compiler. */ + #include "frconfig.h" + #include "..\portable\BCC\16BitDOS\flsh186\prtmacro.h" + typedef void ( __interrupt __far *pxISR )(); +#endif + +#ifdef __GNUC__ + #ifdef __AVR32_AVR32A__ + #include "portmacro.h" + #endif +#endif + +#ifdef __ICCAVR32__ + #ifdef __CORE__ + #if __CORE__ == __AVR32A__ + #include "portmacro.h" + #endif + #endif +#endif + +#ifdef __91467D + #include "portmacro.h" +#endif + +#ifdef __96340 + #include "portmacro.h" +#endif + + +#ifdef __IAR_V850ES_Fx3__ + #include "../../Source/portable/IAR/V850ES/portmacro.h" +#endif + +#ifdef __IAR_V850ES_Jx3__ + #include "../../Source/portable/IAR/V850ES/portmacro.h" +#endif + +#ifdef __IAR_V850ES_Jx3_L__ + #include "../../Source/portable/IAR/V850ES/portmacro.h" +#endif + +#ifdef __IAR_V850ES_Jx2__ + #include "../../Source/portable/IAR/V850ES/portmacro.h" +#endif + +#ifdef __IAR_V850ES_Hx2__ + #include "../../Source/portable/IAR/V850ES/portmacro.h" +#endif + +#ifdef __IAR_78K0R_Kx3__ + #include "../../Source/portable/IAR/78K0R/portmacro.h" +#endif + +#ifdef __IAR_78K0R_Kx3L__ + #include "../../Source/portable/IAR/78K0R/portmacro.h" +#endif + +#endif /* DEPRECATED_DEFINITIONS_H */ + diff --git a/Program/XLLC/FreeRTOS/include/event_groups.h b/Program/XLLC/FreeRTOS/include/event_groups.h new file mode 100644 index 0000000000000000000000000000000000000000..bcb3b23145433fda158d38deaf61f11da7bfaf67 --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/event_groups.h @@ -0,0 +1,797 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +#ifndef EVENT_GROUPS_H +#define EVENT_GROUPS_H + +#ifndef INC_FREERTOS_H + #error "include FreeRTOS.h" must appear in source files before "include event_groups.h" +#endif + +/* FreeRTOS includes. */ +#include "timers.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * An event group is a collection of bits to which an application can assign a + * meaning. For example, an application may create an event group to convey + * the status of various CAN bus related events in which bit 0 might mean "A CAN + * message has been received and is ready for processing", bit 1 might mean "The + * application has queued a message that is ready for sending onto the CAN + * network", and bit 2 might mean "It is time to send a SYNC message onto the + * CAN network" etc. A task can then test the bit values to see which events + * are active, and optionally enter the Blocked state to wait for a specified + * bit or a group of specified bits to be active. To continue the CAN bus + * example, a CAN controlling task can enter the Blocked state (and therefore + * not consume any processing time) until either bit 0, bit 1 or bit 2 are + * active, at which time the bit that was actually active would inform the task + * which action it had to take (process a received message, send a message, or + * send a SYNC). + * + * The event groups implementation contains intelligence to avoid race + * conditions that would otherwise occur were an application to use a simple + * variable for the same purpose. This is particularly important with respect + * to when a bit within an event group is to be cleared, and when bits have to + * be set and then tested atomically - as is the case where event groups are + * used to create a synchronisation point between multiple tasks (a + * 'rendezvous'). + * + * \defgroup EventGroup + */ + + + +/** + * event_groups.h + * + * Type by which event groups are referenced. For example, a call to + * xEventGroupCreate() returns an EventGroupHandle_t variable that can then + * be used as a parameter to other event group functions. + * + * \defgroup EventGroupHandle_t EventGroupHandle_t + * \ingroup EventGroup + */ +typedef void * EventGroupHandle_t; + +/* + * The type that holds event bits always matches TickType_t - therefore the + * number of bits it holds is set by configUSE_16_BIT_TICKS (16 bits if set to 1, + * 32 bits if set to 0. + * + * \defgroup EventBits_t EventBits_t + * \ingroup EventGroup + */ +typedef TickType_t EventBits_t; + +/** + * event_groups.h + *
+ EventGroupHandle_t xEventGroupCreate( void );
+
+ * + * Create a new event group. + * + * Internally, within the FreeRTOS implementation, event groups use a [small] + * block of memory, in which the event group's structure is stored. If an event + * groups is created using xEventGropuCreate() then the required memory is + * automatically dynamically allocated inside the xEventGroupCreate() function. + * (see http://www.freertos.org/a00111.html). If an event group is created + * using xEventGropuCreateStatic() then the application writer must instead + * provide the memory that will get used by the event group. + * xEventGroupCreateStatic() therefore allows an event group to be created + * without using any dynamic memory allocation. + * + * Although event groups are not related to ticks, for internal implementation + * reasons the number of bits available for use in an event group is dependent + * on the configUSE_16_BIT_TICKS setting in FreeRTOSConfig.h. If + * configUSE_16_BIT_TICKS is 1 then each event group contains 8 usable bits (bit + * 0 to bit 7). If configUSE_16_BIT_TICKS is set to 0 then each event group has + * 24 usable bits (bit 0 to bit 23). The EventBits_t type is used to store + * event bits within an event group. + * + * @return If the event group was created then a handle to the event group is + * returned. If there was insufficient FreeRTOS heap available to create the + * event group then NULL is returned. See http://www.freertos.org/a00111.html + * + * Example usage: + 
+	// Declare a variable to hold the created event group.
+	EventGroupHandle_t xCreatedEventGroup;
+
+	// Attempt to create the event group.
+	xCreatedEventGroup = xEventGroupCreate();
+
+	// Was the event group created successfully?
+	if( xCreatedEventGroup == NULL )
+	{
+		// The event group was not created because there was insufficient
+		// FreeRTOS heap available.
+	}
+	else
+	{
+		// The event group was created.
+	}
+
+ * \defgroup xEventGroupCreate xEventGroupCreate + * \ingroup EventGroup + */ +#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + EventGroupHandle_t xEventGroupCreate( void ) PRIVILEGED_FUNCTION; +#endif + +/** + * event_groups.h + *
+ EventGroupHandle_t xEventGroupCreateStatic( EventGroupHandle_t * pxEventGroupBuffer );
+
+ * + * Create a new event group. + * + * Internally, within the FreeRTOS implementation, event groups use a [small] + * block of memory, in which the event group's structure is stored. If an event + * groups is created using xEventGropuCreate() then the required memory is + * automatically dynamically allocated inside the xEventGroupCreate() function. + * (see http://www.freertos.org/a00111.html). If an event group is created + * using xEventGropuCreateStatic() then the application writer must instead + * provide the memory that will get used by the event group. + * xEventGroupCreateStatic() therefore allows an event group to be created + * without using any dynamic memory allocation. + * + * Although event groups are not related to ticks, for internal implementation + * reasons the number of bits available for use in an event group is dependent + * on the configUSE_16_BIT_TICKS setting in FreeRTOSConfig.h. If + * configUSE_16_BIT_TICKS is 1 then each event group contains 8 usable bits (bit + * 0 to bit 7). If configUSE_16_BIT_TICKS is set to 0 then each event group has + * 24 usable bits (bit 0 to bit 23). The EventBits_t type is used to store + * event bits within an event group. + * + * @param pxEventGroupBuffer pxEventGroupBuffer must point to a variable of type + * StaticEventGroup_t, which will be then be used to hold the event group's data + * structures, removing the need for the memory to be allocated dynamically. + * + * @return If the event group was created then a handle to the event group is + * returned. If pxEventGroupBuffer was NULL then NULL is returned. + * + * Example usage: + 
+	// StaticEventGroup_t is a publicly accessible structure that has the same
+	// size and alignment requirements as the real event group structure.  It is
+	// provided as a mechanism for applications to know the size of the event
+	// group (which is dependent on the architecture and configuration file
+	// settings) without breaking the strict data hiding policy by exposing the
+	// real event group internals.  This StaticEventGroup_t variable is passed
+	// into the xSemaphoreCreateEventGroupStatic() function and is used to store
+	// the event group's data structures
+	StaticEventGroup_t xEventGroupBuffer;
+
+	// Create the event group without dynamically allocating any memory.
+	xEventGroup = xEventGroupCreateStatic( &xEventGroupBuffer );
+
+ */ +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + EventGroupHandle_t xEventGroupCreateStatic( StaticEventGroup_t *pxEventGroupBuffer ) PRIVILEGED_FUNCTION; +#endif + +/** + * event_groups.h + *
+	EventBits_t xEventGroupWaitBits( 	EventGroupHandle_t xEventGroup,
+										const EventBits_t uxBitsToWaitFor,
+										const BaseType_t xClearOnExit,
+										const BaseType_t xWaitForAllBits,
+										const TickType_t xTicksToWait );
+
+ * + * [Potentially] block to wait for one or more bits to be set within a + * previously created event group. + * + * This function cannot be called from an interrupt. + * + * @param xEventGroup The event group in which the bits are being tested. The + * event group must have previously been created using a call to + * xEventGroupCreate(). + * + * @param uxBitsToWaitFor A bitwise value that indicates the bit or bits to test + * inside the event group. For example, to wait for bit 0 and/or bit 2 set + * uxBitsToWaitFor to 0x05. To wait for bits 0 and/or bit 1 and/or bit 2 set + * uxBitsToWaitFor to 0x07. Etc. + * + * @param xClearOnExit If xClearOnExit is set to pdTRUE then any bits within + * uxBitsToWaitFor that are set within the event group will be cleared before + * xEventGroupWaitBits() returns if the wait condition was met (if the function + * returns for a reason other than a timeout). If xClearOnExit is set to + * pdFALSE then the bits set in the event group are not altered when the call to + * xEventGroupWaitBits() returns. + * + * @param xWaitForAllBits If xWaitForAllBits is set to pdTRUE then + * xEventGroupWaitBits() will return when either all the bits in uxBitsToWaitFor + * are set or the specified block time expires. If xWaitForAllBits is set to + * pdFALSE then xEventGroupWaitBits() will return when any one of the bits set + * in uxBitsToWaitFor is set or the specified block time expires. The block + * time is specified by the xTicksToWait parameter. + * + * @param xTicksToWait The maximum amount of time (specified in 'ticks') to wait + * for one/all (depending on the xWaitForAllBits value) of the bits specified by + * uxBitsToWaitFor to become set. + * + * @return The value of the event group at the time either the bits being waited + * for became set, or the block time expired. Test the return value to know + * which bits were set. If xEventGroupWaitBits() returned because its timeout + * expired then not all the bits being waited for will be set. If + * xEventGroupWaitBits() returned because the bits it was waiting for were set + * then the returned value is the event group value before any bits were + * automatically cleared in the case that xClearOnExit parameter was set to + * pdTRUE. + * + * Example usage: + 
+   #define BIT_0	( 1 << 0 )
+   #define BIT_4	( 1 << 4 )
+
+   void aFunction( EventGroupHandle_t xEventGroup )
+   {
+   EventBits_t uxBits;
+   const TickType_t xTicksToWait = 100 / portTICK_PERIOD_MS;
+
+		// Wait a maximum of 100ms for either bit 0 or bit 4 to be set within
+		// the event group.  Clear the bits before exiting.
+		uxBits = xEventGroupWaitBits(
+					xEventGroup,	// The event group being tested.
+					BIT_0 | BIT_4,	// The bits within the event group to wait for.
+					pdTRUE,			// BIT_0 and BIT_4 should be cleared before returning.
+					pdFALSE,		// Don't wait for both bits, either bit will do.
+					xTicksToWait );	// Wait a maximum of 100ms for either bit to be set.
+
+		if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
+		{
+			// xEventGroupWaitBits() returned because both bits were set.
+		}
+		else if( ( uxBits & BIT_0 ) != 0 )
+		{
+			// xEventGroupWaitBits() returned because just BIT_0 was set.
+		}
+		else if( ( uxBits & BIT_4 ) != 0 )
+		{
+			// xEventGroupWaitBits() returned because just BIT_4 was set.
+		}
+		else
+		{
+			// xEventGroupWaitBits() returned because xTicksToWait ticks passed
+			// without either BIT_0 or BIT_4 becoming set.
+		}
+   }
+
+ * \defgroup xEventGroupWaitBits xEventGroupWaitBits + * \ingroup EventGroup + */ +EventBits_t xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION; + +/** + * event_groups.h + *
+	EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear );
+
+ * + * Clear bits within an event group. This function cannot be called from an + * interrupt. + * + * @param xEventGroup The event group in which the bits are to be cleared. + * + * @param uxBitsToClear A bitwise value that indicates the bit or bits to clear + * in the event group. For example, to clear bit 3 only, set uxBitsToClear to + * 0x08. To clear bit 3 and bit 0 set uxBitsToClear to 0x09. + * + * @return The value of the event group before the specified bits were cleared. + * + * Example usage: + 
+   #define BIT_0	( 1 << 0 )
+   #define BIT_4	( 1 << 4 )
+
+   void aFunction( EventGroupHandle_t xEventGroup )
+   {
+   EventBits_t uxBits;
+
+		// Clear bit 0 and bit 4 in xEventGroup.
+		uxBits = xEventGroupClearBits(
+								xEventGroup,	// The event group being updated.
+								BIT_0 | BIT_4 );// The bits being cleared.
+
+		if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
+		{
+			// Both bit 0 and bit 4 were set before xEventGroupClearBits() was
+			// called.  Both will now be clear (not set).
+		}
+		else if( ( uxBits & BIT_0 ) != 0 )
+		{
+			// Bit 0 was set before xEventGroupClearBits() was called.  It will
+			// now be clear.
+		}
+		else if( ( uxBits & BIT_4 ) != 0 )
+		{
+			// Bit 4 was set before xEventGroupClearBits() was called.  It will
+			// now be clear.
+		}
+		else
+		{
+			// Neither bit 0 nor bit 4 were set in the first place.
+		}
+   }
+
+ * \defgroup xEventGroupClearBits xEventGroupClearBits + * \ingroup EventGroup + */ +EventBits_t xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear ) PRIVILEGED_FUNCTION; + +/** + * event_groups.h + *
+	BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet );
+
+ * + * A version of xEventGroupClearBits() that can be called from an interrupt. + * + * Setting bits in an event group is not a deterministic operation because there + * are an unknown number of tasks that may be waiting for the bit or bits being + * set. FreeRTOS does not allow nondeterministic operations to be performed + * while interrupts are disabled, so protects event groups that are accessed + * from tasks by suspending the scheduler rather than disabling interrupts. As + * a result event groups cannot be accessed directly from an interrupt service + * routine. Therefore xEventGroupClearBitsFromISR() sends a message to the + * timer task to have the clear operation performed in the context of the timer + * task. + * + * @param xEventGroup The event group in which the bits are to be cleared. + * + * @param uxBitsToClear A bitwise value that indicates the bit or bits to clear. + * For example, to clear bit 3 only, set uxBitsToClear to 0x08. To clear bit 3 + * and bit 0 set uxBitsToClear to 0x09. + * + * @return If the request to execute the function was posted successfully then + * pdPASS is returned, otherwise pdFALSE is returned. pdFALSE will be returned + * if the timer service queue was full. + * + * Example usage: + 
+   #define BIT_0	( 1 << 0 )
+   #define BIT_4	( 1 << 4 )
+
+   // An event group which it is assumed has already been created by a call to
+   // xEventGroupCreate().
+   EventGroupHandle_t xEventGroup;
+
+   void anInterruptHandler( void )
+   {
+		// Clear bit 0 and bit 4 in xEventGroup.
+		xResult = xEventGroupClearBitsFromISR(
+							xEventGroup,	 // The event group being updated.
+							BIT_0 | BIT_4 ); // The bits being set.
+
+		if( xResult == pdPASS )
+		{
+			// The message was posted successfully.
+		}
+  }
+
+ * \defgroup xEventGroupClearBitsFromISR xEventGroupClearBitsFromISR + * \ingroup EventGroup + */ +#if( configUSE_TRACE_FACILITY == 1 ) + BaseType_t xEventGroupClearBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet ) PRIVILEGED_FUNCTION; +#else + #define xEventGroupClearBitsFromISR( xEventGroup, uxBitsToClear ) xTimerPendFunctionCallFromISR( vEventGroupClearBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToClear, NULL ) +#endif + +/** + * event_groups.h + *
+	EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet );
+
+ * + * Set bits within an event group. + * This function cannot be called from an interrupt. xEventGroupSetBitsFromISR() + * is a version that can be called from an interrupt. + * + * Setting bits in an event group will automatically unblock tasks that are + * blocked waiting for the bits. + * + * @param xEventGroup The event group in which the bits are to be set. + * + * @param uxBitsToSet A bitwise value that indicates the bit or bits to set. + * For example, to set bit 3 only, set uxBitsToSet to 0x08. To set bit 3 + * and bit 0 set uxBitsToSet to 0x09. + * + * @return The value of the event group at the time the call to + * xEventGroupSetBits() returns. There are two reasons why the returned value + * might have the bits specified by the uxBitsToSet parameter cleared. First, + * if setting a bit results in a task that was waiting for the bit leaving the + * blocked state then it is possible the bit will be cleared automatically + * (see the xClearBitOnExit parameter of xEventGroupWaitBits()). Second, any + * unblocked (or otherwise Ready state) task that has a priority above that of + * the task that called xEventGroupSetBits() will execute and may change the + * event group value before the call to xEventGroupSetBits() returns. + * + * Example usage: + 
+   #define BIT_0	( 1 << 0 )
+   #define BIT_4	( 1 << 4 )
+
+   void aFunction( EventGroupHandle_t xEventGroup )
+   {
+   EventBits_t uxBits;
+
+		// Set bit 0 and bit 4 in xEventGroup.
+		uxBits = xEventGroupSetBits(
+							xEventGroup,	// The event group being updated.
+							BIT_0 | BIT_4 );// The bits being set.
+
+		if( ( uxBits & ( BIT_0 | BIT_4 ) ) == ( BIT_0 | BIT_4 ) )
+		{
+			// Both bit 0 and bit 4 remained set when the function returned.
+		}
+		else if( ( uxBits & BIT_0 ) != 0 )
+		{
+			// Bit 0 remained set when the function returned, but bit 4 was
+			// cleared.  It might be that bit 4 was cleared automatically as a
+			// task that was waiting for bit 4 was removed from the Blocked
+			// state.
+		}
+		else if( ( uxBits & BIT_4 ) != 0 )
+		{
+			// Bit 4 remained set when the function returned, but bit 0 was
+			// cleared.  It might be that bit 0 was cleared automatically as a
+			// task that was waiting for bit 0 was removed from the Blocked
+			// state.
+		}
+		else
+		{
+			// Neither bit 0 nor bit 4 remained set.  It might be that a task
+			// was waiting for both of the bits to be set, and the bits were
+			// cleared as the task left the Blocked state.
+		}
+   }
+
+ * \defgroup xEventGroupSetBits xEventGroupSetBits + * \ingroup EventGroup + */ +EventBits_t xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet ) PRIVILEGED_FUNCTION; + +/** + * event_groups.h + *
+	BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken );
+
+ * + * A version of xEventGroupSetBits() that can be called from an interrupt. + * + * Setting bits in an event group is not a deterministic operation because there + * are an unknown number of tasks that may be waiting for the bit or bits being + * set. FreeRTOS does not allow nondeterministic operations to be performed in + * interrupts or from critical sections. Therefore xEventGroupSetBitsFromISR() + * sends a message to the timer task to have the set operation performed in the + * context of the timer task - where a scheduler lock is used in place of a + * critical section. + * + * @param xEventGroup The event group in which the bits are to be set. + * + * @param uxBitsToSet A bitwise value that indicates the bit or bits to set. + * For example, to set bit 3 only, set uxBitsToSet to 0x08. To set bit 3 + * and bit 0 set uxBitsToSet to 0x09. + * + * @param pxHigherPriorityTaskWoken As mentioned above, calling this function + * will result in a message being sent to the timer daemon task. If the + * priority of the timer daemon task is higher than the priority of the + * currently running task (the task the interrupt interrupted) then + * *pxHigherPriorityTaskWoken will be set to pdTRUE by + * xEventGroupSetBitsFromISR(), indicating that a context switch should be + * requested before the interrupt exits. For that reason + * *pxHigherPriorityTaskWoken must be initialised to pdFALSE. See the + * example code below. + * + * @return If the request to execute the function was posted successfully then + * pdPASS is returned, otherwise pdFALSE is returned. pdFALSE will be returned + * if the timer service queue was full. + * + * Example usage: + 
+   #define BIT_0	( 1 << 0 )
+   #define BIT_4	( 1 << 4 )
+
+   // An event group which it is assumed has already been created by a call to
+   // xEventGroupCreate().
+   EventGroupHandle_t xEventGroup;
+
+   void anInterruptHandler( void )
+   {
+   BaseType_t xHigherPriorityTaskWoken, xResult;
+
+		// xHigherPriorityTaskWoken must be initialised to pdFALSE.
+		xHigherPriorityTaskWoken = pdFALSE;
+
+		// Set bit 0 and bit 4 in xEventGroup.
+		xResult = xEventGroupSetBitsFromISR(
+							xEventGroup,	// The event group being updated.
+							BIT_0 | BIT_4   // The bits being set.
+							&xHigherPriorityTaskWoken );
+
+		// Was the message posted successfully?
+		if( xResult == pdPASS )
+		{
+			// If xHigherPriorityTaskWoken is now set to pdTRUE then a context
+			// switch should be requested.  The macro used is port specific and
+			// will be either portYIELD_FROM_ISR() or portEND_SWITCHING_ISR() -
+			// refer to the documentation page for the port being used.
+			portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+		}
+  }
+
+ * \defgroup xEventGroupSetBitsFromISR xEventGroupSetBitsFromISR + * \ingroup EventGroup + */ +#if( configUSE_TRACE_FACILITY == 1 ) + BaseType_t xEventGroupSetBitsFromISR( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION; +#else + #define xEventGroupSetBitsFromISR( xEventGroup, uxBitsToSet, pxHigherPriorityTaskWoken ) xTimerPendFunctionCallFromISR( vEventGroupSetBitsCallback, ( void * ) xEventGroup, ( uint32_t ) uxBitsToSet, pxHigherPriorityTaskWoken ) +#endif + +/** + * event_groups.h + *
+	EventBits_t xEventGroupSync(	EventGroupHandle_t xEventGroup,
+									const EventBits_t uxBitsToSet,
+									const EventBits_t uxBitsToWaitFor,
+									TickType_t xTicksToWait );
+
+ * + * Atomically set bits within an event group, then wait for a combination of + * bits to be set within the same event group. This functionality is typically + * used to synchronise multiple tasks, where each task has to wait for the other + * tasks to reach a synchronisation point before proceeding. + * + * This function cannot be used from an interrupt. + * + * The function will return before its block time expires if the bits specified + * by the uxBitsToWait parameter are set, or become set within that time. In + * this case all the bits specified by uxBitsToWait will be automatically + * cleared before the function returns. + * + * @param xEventGroup The event group in which the bits are being tested. The + * event group must have previously been created using a call to + * xEventGroupCreate(). + * + * @param uxBitsToSet The bits to set in the event group before determining + * if, and possibly waiting for, all the bits specified by the uxBitsToWait + * parameter are set. + * + * @param uxBitsToWaitFor A bitwise value that indicates the bit or bits to test + * inside the event group. For example, to wait for bit 0 and bit 2 set + * uxBitsToWaitFor to 0x05. To wait for bits 0 and bit 1 and bit 2 set + * uxBitsToWaitFor to 0x07. Etc. + * + * @param xTicksToWait The maximum amount of time (specified in 'ticks') to wait + * for all of the bits specified by uxBitsToWaitFor to become set. + * + * @return The value of the event group at the time either the bits being waited + * for became set, or the block time expired. Test the return value to know + * which bits were set. If xEventGroupSync() returned because its timeout + * expired then not all the bits being waited for will be set. If + * xEventGroupSync() returned because all the bits it was waiting for were + * set then the returned value is the event group value before any bits were + * automatically cleared. + * + * Example usage: + 
+ // Bits used by the three tasks.
+ #define TASK_0_BIT		( 1 << 0 )
+ #define TASK_1_BIT		( 1 << 1 )
+ #define TASK_2_BIT		( 1 << 2 )
+
+ #define ALL_SYNC_BITS ( TASK_0_BIT | TASK_1_BIT | TASK_2_BIT )
+
+ // Use an event group to synchronise three tasks.  It is assumed this event
+ // group has already been created elsewhere.
+ EventGroupHandle_t xEventBits;
+
+ void vTask0( void *pvParameters )
+ {
+ EventBits_t uxReturn;
+ TickType_t xTicksToWait = 100 / portTICK_PERIOD_MS;
+
+	 for( ;; )
+	 {
+		// Perform task functionality here.
+
+		// Set bit 0 in the event flag to note this task has reached the
+		// sync point.  The other two tasks will set the other two bits defined
+		// by ALL_SYNC_BITS.  All three tasks have reached the synchronisation
+		// point when all the ALL_SYNC_BITS are set.  Wait a maximum of 100ms
+		// for this to happen.
+		uxReturn = xEventGroupSync( xEventBits, TASK_0_BIT, ALL_SYNC_BITS, xTicksToWait );
+
+		if( ( uxReturn & ALL_SYNC_BITS ) == ALL_SYNC_BITS )
+		{
+			// All three tasks reached the synchronisation point before the call
+			// to xEventGroupSync() timed out.
+		}
+	}
+ }
+
+ void vTask1( void *pvParameters )
+ {
+	 for( ;; )
+	 {
+		// Perform task functionality here.
+
+		// Set bit 1 in the event flag to note this task has reached the
+		// synchronisation point.  The other two tasks will set the other two
+		// bits defined by ALL_SYNC_BITS.  All three tasks have reached the
+		// synchronisation point when all the ALL_SYNC_BITS are set.  Wait
+		// indefinitely for this to happen.
+		xEventGroupSync( xEventBits, TASK_1_BIT, ALL_SYNC_BITS, portMAX_DELAY );
+
+		// xEventGroupSync() was called with an indefinite block time, so
+		// this task will only reach here if the syncrhonisation was made by all
+		// three tasks, so there is no need to test the return value.
+	 }
+ }
+
+ void vTask2( void *pvParameters )
+ {
+	 for( ;; )
+	 {
+		// Perform task functionality here.
+
+		// Set bit 2 in the event flag to note this task has reached the
+		// synchronisation point.  The other two tasks will set the other two
+		// bits defined by ALL_SYNC_BITS.  All three tasks have reached the
+		// synchronisation point when all the ALL_SYNC_BITS are set.  Wait
+		// indefinitely for this to happen.
+		xEventGroupSync( xEventBits, TASK_2_BIT, ALL_SYNC_BITS, portMAX_DELAY );
+
+		// xEventGroupSync() was called with an indefinite block time, so
+		// this task will only reach here if the syncrhonisation was made by all
+		// three tasks, so there is no need to test the return value.
+	}
+ }
+
+
+ * \defgroup xEventGroupSync xEventGroupSync + * \ingroup EventGroup + */ +EventBits_t xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, const EventBits_t uxBitsToWaitFor, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION; + + +/** + * event_groups.h + *
+	EventBits_t xEventGroupGetBits( EventGroupHandle_t xEventGroup );
+
+ * + * Returns the current value of the bits in an event group. This function + * cannot be used from an interrupt. + * + * @param xEventGroup The event group being queried. + * + * @return The event group bits at the time xEventGroupGetBits() was called. + * + * \defgroup xEventGroupGetBits xEventGroupGetBits + * \ingroup EventGroup + */ +#define xEventGroupGetBits( xEventGroup ) xEventGroupClearBits( xEventGroup, 0 ) + +/** + * event_groups.h + *
+	EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup );
+
+ * + * A version of xEventGroupGetBits() that can be called from an ISR. + * + * @param xEventGroup The event group being queried. + * + * @return The event group bits at the time xEventGroupGetBitsFromISR() was called. + * + * \defgroup xEventGroupGetBitsFromISR xEventGroupGetBitsFromISR + * \ingroup EventGroup + */ +EventBits_t xEventGroupGetBitsFromISR( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION; + +/** + * event_groups.h + *
+	void xEventGroupDelete( EventGroupHandle_t xEventGroup );
+
+ * + * Delete an event group that was previously created by a call to + * xEventGroupCreate(). Tasks that are blocked on the event group will be + * unblocked and obtain 0 as the event group's value. + * + * @param xEventGroup The event group being deleted. + */ +void vEventGroupDelete( EventGroupHandle_t xEventGroup ) PRIVILEGED_FUNCTION; + +/* For internal use only. */ +void vEventGroupSetBitsCallback( void *pvEventGroup, const uint32_t ulBitsToSet ) PRIVILEGED_FUNCTION; +void vEventGroupClearBitsCallback( void *pvEventGroup, const uint32_t ulBitsToClear ) PRIVILEGED_FUNCTION; + + +#if (configUSE_TRACE_FACILITY == 1) + UBaseType_t uxEventGroupGetNumber( void* xEventGroup ) PRIVILEGED_FUNCTION; +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* EVENT_GROUPS_H */ + + diff --git a/Program/XLLC/FreeRTOS/include/list.h b/Program/XLLC/FreeRTOS/include/list.h new file mode 100644 index 0000000000000000000000000000000000000000..cde5453f23b37ba353a5c1bd70566b09f9470c2b --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/list.h @@ -0,0 +1,453 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +/* + * This is the list implementation used by the scheduler. While it is tailored + * heavily for the schedulers needs, it is also available for use by + * application code. + * + * list_ts can only store pointers to list_item_ts. Each ListItem_t contains a + * numeric value (xItemValue). Most of the time the lists are sorted in + * descending item value order. + * + * Lists are created already containing one list item. The value of this + * item is the maximum possible that can be stored, it is therefore always at + * the end of the list and acts as a marker. The list member pxHead always + * points to this marker - even though it is at the tail of the list. This + * is because the tail contains a wrap back pointer to the true head of + * the list. + * + * In addition to it's value, each list item contains a pointer to the next + * item in the list (pxNext), a pointer to the list it is in (pxContainer) + * and a pointer to back to the object that contains it. These later two + * pointers are included for efficiency of list manipulation. There is + * effectively a two way link between the object containing the list item and + * the list item itself. + * + * + * \page ListIntroduction List Implementation + * \ingroup FreeRTOSIntro + */ + +#ifndef INC_FREERTOS_H + #error FreeRTOS.h must be included before list.h +#endif + +#ifndef LIST_H +#define LIST_H + +/* + * The list structure members are modified from within interrupts, and therefore + * by rights should be declared volatile. However, they are only modified in a + * functionally atomic way (within critical sections of with the scheduler + * suspended) and are either passed by reference into a function or indexed via + * a volatile variable. Therefore, in all use cases tested so far, the volatile + * qualifier can be omitted in order to provide a moderate performance + * improvement without adversely affecting functional behaviour. The assembly + * instructions generated by the IAR, ARM and GCC compilers when the respective + * compiler's options were set for maximum optimisation has been inspected and + * deemed to be as intended. That said, as compiler technology advances, and + * especially if aggressive cross module optimisation is used (a use case that + * has not been exercised to any great extend) then it is feasible that the + * volatile qualifier will be needed for correct optimisation. It is expected + * that a compiler removing essential code because, without the volatile + * qualifier on the list structure members and with aggressive cross module + * optimisation, the compiler deemed the code unnecessary will result in + * complete and obvious failure of the scheduler. If this is ever experienced + * then the volatile qualifier can be inserted in the relevant places within the + * list structures by simply defining configLIST_VOLATILE to volatile in + * FreeRTOSConfig.h (as per the example at the bottom of this comment block). + * If configLIST_VOLATILE is not defined then the preprocessor directives below + * will simply #define configLIST_VOLATILE away completely. + * + * To use volatile list structure members then add the following line to + * FreeRTOSConfig.h (without the quotes): + * "#define configLIST_VOLATILE volatile" + */ +#ifndef configLIST_VOLATILE + #define configLIST_VOLATILE +#endif /* configSUPPORT_CROSS_MODULE_OPTIMISATION */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Macros that can be used to place known values within the list structures, +then check that the known values do not get corrupted during the execution of +the application. These may catch the list data structures being overwritten in +memory. They will not catch data errors caused by incorrect configuration or +use of FreeRTOS.*/ +#if( configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES == 0 ) + /* Define the macros to do nothing. */ + #define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE + #define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE + #define listFIRST_LIST_INTEGRITY_CHECK_VALUE + #define listSECOND_LIST_INTEGRITY_CHECK_VALUE + #define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) + #define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) + #define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList ) + #define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList ) + #define listTEST_LIST_ITEM_INTEGRITY( pxItem ) + #define listTEST_LIST_INTEGRITY( pxList ) +#else + /* Define macros that add new members into the list structures. */ + #define listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue1; + #define listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE TickType_t xListItemIntegrityValue2; + #define listFIRST_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue1; + #define listSECOND_LIST_INTEGRITY_CHECK_VALUE TickType_t xListIntegrityValue2; + + /* Define macros that set the new structure members to known values. */ + #define listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue1 = pdINTEGRITY_CHECK_VALUE + #define listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem ) ( pxItem )->xListItemIntegrityValue2 = pdINTEGRITY_CHECK_VALUE + #define listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList ) ( pxList )->xListIntegrityValue1 = pdINTEGRITY_CHECK_VALUE + #define listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList ) ( pxList )->xListIntegrityValue2 = pdINTEGRITY_CHECK_VALUE + + /* Define macros that will assert if one of the structure members does not + contain its expected value. */ + #define listTEST_LIST_ITEM_INTEGRITY( pxItem ) configASSERT( ( ( pxItem )->xListItemIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxItem )->xListItemIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) ) + #define listTEST_LIST_INTEGRITY( pxList ) configASSERT( ( ( pxList )->xListIntegrityValue1 == pdINTEGRITY_CHECK_VALUE ) && ( ( pxList )->xListIntegrityValue2 == pdINTEGRITY_CHECK_VALUE ) ) +#endif /* configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES */ + + +/* + * Definition of the only type of object that a list can contain. + */ +struct xLIST_ITEM +{ + listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ + configLIST_VOLATILE TickType_t xItemValue; /*< The value being listed. In most cases this is used to sort the list in descending order. */ + struct xLIST_ITEM * configLIST_VOLATILE pxNext; /*< Pointer to the next ListItem_t in the list. */ + struct xLIST_ITEM * configLIST_VOLATILE pxPrevious; /*< Pointer to the previous ListItem_t in the list. */ + void * pvOwner; /*< Pointer to the object (normally a TCB) that contains the list item. There is therefore a two way link between the object containing the list item and the list item itself. */ + void * configLIST_VOLATILE pvContainer; /*< Pointer to the list in which this list item is placed (if any). */ + listSECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ +}; +typedef struct xLIST_ITEM ListItem_t; /* For some reason lint wants this as two separate definitions. */ + +struct xMINI_LIST_ITEM +{ + listFIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ + configLIST_VOLATILE TickType_t xItemValue; + struct xLIST_ITEM * configLIST_VOLATILE pxNext; + struct xLIST_ITEM * configLIST_VOLATILE pxPrevious; +}; +typedef struct xMINI_LIST_ITEM MiniListItem_t; + +/* + * Definition of the type of queue used by the scheduler. + */ +typedef struct xLIST +{ + listFIRST_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ + configLIST_VOLATILE UBaseType_t uxNumberOfItems; + ListItem_t * configLIST_VOLATILE pxIndex; /*< Used to walk through the list. Points to the last item returned by a call to listGET_OWNER_OF_NEXT_ENTRY (). */ + MiniListItem_t xListEnd; /*< List item that contains the maximum possible item value meaning it is always at the end of the list and is therefore used as a marker. */ + listSECOND_LIST_INTEGRITY_CHECK_VALUE /*< Set to a known value if configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */ +} List_t; + +/* + * Access macro to set the owner of a list item. The owner of a list item + * is the object (usually a TCB) that contains the list item. + * + * \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER + * \ingroup LinkedList + */ +#define listSET_LIST_ITEM_OWNER( pxListItem, pxOwner ) ( ( pxListItem )->pvOwner = ( void * ) ( pxOwner ) ) + +/* + * Access macro to get the owner of a list item. The owner of a list item + * is the object (usually a TCB) that contains the list item. + * + * \page listSET_LIST_ITEM_OWNER listSET_LIST_ITEM_OWNER + * \ingroup LinkedList + */ +#define listGET_LIST_ITEM_OWNER( pxListItem ) ( ( pxListItem )->pvOwner ) + +/* + * Access macro to set the value of the list item. In most cases the value is + * used to sort the list in descending order. + * + * \page listSET_LIST_ITEM_VALUE listSET_LIST_ITEM_VALUE + * \ingroup LinkedList + */ +#define listSET_LIST_ITEM_VALUE( pxListItem, xValue ) ( ( pxListItem )->xItemValue = ( xValue ) ) + +/* + * Access macro to retrieve the value of the list item. The value can + * represent anything - for example the priority of a task, or the time at + * which a task should be unblocked. + * + * \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE + * \ingroup LinkedList + */ +#define listGET_LIST_ITEM_VALUE( pxListItem ) ( ( pxListItem )->xItemValue ) + +/* + * Access macro to retrieve the value of the list item at the head of a given + * list. + * + * \page listGET_LIST_ITEM_VALUE listGET_LIST_ITEM_VALUE + * \ingroup LinkedList + */ +#define listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext->xItemValue ) + +/* + * Return the list item at the head of the list. + * + * \page listGET_HEAD_ENTRY listGET_HEAD_ENTRY + * \ingroup LinkedList + */ +#define listGET_HEAD_ENTRY( pxList ) ( ( ( pxList )->xListEnd ).pxNext ) + +/* + * Return the list item at the head of the list. + * + * \page listGET_NEXT listGET_NEXT + * \ingroup LinkedList + */ +#define listGET_NEXT( pxListItem ) ( ( pxListItem )->pxNext ) + +/* + * Return the list item that marks the end of the list + * + * \page listGET_END_MARKER listGET_END_MARKER + * \ingroup LinkedList + */ +#define listGET_END_MARKER( pxList ) ( ( ListItem_t const * ) ( &( ( pxList )->xListEnd ) ) ) + +/* + * Access macro to determine if a list contains any items. The macro will + * only have the value true if the list is empty. + * + * \page listLIST_IS_EMPTY listLIST_IS_EMPTY + * \ingroup LinkedList + */ +#define listLIST_IS_EMPTY( pxList ) ( ( BaseType_t ) ( ( pxList )->uxNumberOfItems == ( UBaseType_t ) 0 ) ) + +/* + * Access macro to return the number of items in the list. + */ +#define listCURRENT_LIST_LENGTH( pxList ) ( ( pxList )->uxNumberOfItems ) + +/* + * Access function to obtain the owner of the next entry in a list. + * + * The list member pxIndex is used to walk through a list. Calling + * listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list + * and returns that entry's pxOwner parameter. Using multiple calls to this + * function it is therefore possible to move through every item contained in + * a list. + * + * The pxOwner parameter of a list item is a pointer to the object that owns + * the list item. In the scheduler this is normally a task control block. + * The pxOwner parameter effectively creates a two way link between the list + * item and its owner. + * + * @param pxTCB pxTCB is set to the address of the owner of the next list item. + * @param pxList The list from which the next item owner is to be returned. + * + * \page listGET_OWNER_OF_NEXT_ENTRY listGET_OWNER_OF_NEXT_ENTRY + * \ingroup LinkedList + */ +#define listGET_OWNER_OF_NEXT_ENTRY( pxTCB, pxList ) \ +{ \ +List_t * const pxConstList = ( pxList ); \ + /* Increment the index to the next item and return the item, ensuring */ \ + /* we don't return the marker used at the end of the list. */ \ + ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \ + if( ( void * ) ( pxConstList )->pxIndex == ( void * ) &( ( pxConstList )->xListEnd ) ) \ + { \ + ( pxConstList )->pxIndex = ( pxConstList )->pxIndex->pxNext; \ + } \ + ( pxTCB ) = ( pxConstList )->pxIndex->pvOwner; \ +} + + +/* + * Access function to obtain the owner of the first entry in a list. Lists + * are normally sorted in ascending item value order. + * + * This function returns the pxOwner member of the first item in the list. + * The pxOwner parameter of a list item is a pointer to the object that owns + * the list item. In the scheduler this is normally a task control block. + * The pxOwner parameter effectively creates a two way link between the list + * item and its owner. + * + * @param pxList The list from which the owner of the head item is to be + * returned. + * + * \page listGET_OWNER_OF_HEAD_ENTRY listGET_OWNER_OF_HEAD_ENTRY + * \ingroup LinkedList + */ +#define listGET_OWNER_OF_HEAD_ENTRY( pxList ) ( (&( ( pxList )->xListEnd ))->pxNext->pvOwner ) + +/* + * Check to see if a list item is within a list. The list item maintains a + * "container" pointer that points to the list it is in. All this macro does + * is check to see if the container and the list match. + * + * @param pxList The list we want to know if the list item is within. + * @param pxListItem The list item we want to know if is in the list. + * @return pdTRUE if the list item is in the list, otherwise pdFALSE. + */ +#define listIS_CONTAINED_WITHIN( pxList, pxListItem ) ( ( BaseType_t ) ( ( pxListItem )->pvContainer == ( void * ) ( pxList ) ) ) + +/* + * Return the list a list item is contained within (referenced from). + * + * @param pxListItem The list item being queried. + * @return A pointer to the List_t object that references the pxListItem + */ +#define listLIST_ITEM_CONTAINER( pxListItem ) ( ( pxListItem )->pvContainer ) + +/* + * This provides a crude means of knowing if a list has been initialised, as + * pxList->xListEnd.xItemValue is set to portMAX_DELAY by the vListInitialise() + * function. + */ +#define listLIST_IS_INITIALISED( pxList ) ( ( pxList )->xListEnd.xItemValue == portMAX_DELAY ) + +/* + * Must be called before a list is used! This initialises all the members + * of the list structure and inserts the xListEnd item into the list as a + * marker to the back of the list. + * + * @param pxList Pointer to the list being initialised. + * + * \page vListInitialise vListInitialise + * \ingroup LinkedList + */ +void vListInitialise( List_t * const pxList ) PRIVILEGED_FUNCTION; + +/* + * Must be called before a list item is used. This sets the list container to + * null so the item does not think that it is already contained in a list. + * + * @param pxItem Pointer to the list item being initialised. + * + * \page vListInitialiseItem vListInitialiseItem + * \ingroup LinkedList + */ +void vListInitialiseItem( ListItem_t * const pxItem ) PRIVILEGED_FUNCTION; + +/* + * Insert a list item into a list. The item will be inserted into the list in + * a position determined by its item value (descending item value order). + * + * @param pxList The list into which the item is to be inserted. + * + * @param pxNewListItem The item that is to be placed in the list. + * + * \page vListInsert vListInsert + * \ingroup LinkedList + */ +void vListInsert( List_t * const pxList, ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION; + +/* + * Insert a list item into a list. The item will be inserted in a position + * such that it will be the last item within the list returned by multiple + * calls to listGET_OWNER_OF_NEXT_ENTRY. + * + * The list member pxIndex is used to walk through a list. Calling + * listGET_OWNER_OF_NEXT_ENTRY increments pxIndex to the next item in the list. + * Placing an item in a list using vListInsertEnd effectively places the item + * in the list position pointed to by pxIndex. This means that every other + * item within the list will be returned by listGET_OWNER_OF_NEXT_ENTRY before + * the pxIndex parameter again points to the item being inserted. + * + * @param pxList The list into which the item is to be inserted. + * + * @param pxNewListItem The list item to be inserted into the list. + * + * \page vListInsertEnd vListInsertEnd + * \ingroup LinkedList + */ +void vListInsertEnd( List_t * const pxList, ListItem_t * const pxNewListItem ) PRIVILEGED_FUNCTION; + +/* + * Remove an item from a list. The list item has a pointer to the list that + * it is in, so only the list item need be passed into the function. + * + * @param uxListRemove The item to be removed. The item will remove itself from + * the list pointed to by it's pxContainer parameter. + * + * @return The number of items that remain in the list after the list item has + * been removed. + * + * \page uxListRemove uxListRemove + * \ingroup LinkedList + */ +UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove ) PRIVILEGED_FUNCTION; + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/Program/XLLC/FreeRTOS/include/mpu_prototypes.h b/Program/XLLC/FreeRTOS/include/mpu_prototypes.h new file mode 100644 index 0000000000000000000000000000000000000000..b4a1d0980399190ccd817ad547b73e94f4086261 --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/mpu_prototypes.h @@ -0,0 +1,177 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +/* + * When the MPU is used the standard (non MPU) API functions are mapped to + * equivalents that start "MPU_", the prototypes for which are defined in this + * header files. This will cause the application code to call the MPU_ version + * which wraps the non-MPU version with privilege promoting then demoting code, + * so the kernel code always runs will full privileges. + */ + + +#ifndef MPU_PROTOTYPES_H +#define MPU_PROTOTYPES_H + +/* MPU versions of tasks.h API function. */ +BaseType_t MPU_xTaskCreate( TaskFunction_t pxTaskCode, const char * const pcName, const uint16_t usStackDepth, void * const pvParameters, UBaseType_t uxPriority, TaskHandle_t * const pxCreatedTask ); +TaskHandle_t MPU_xTaskCreateStatic( TaskFunction_t pxTaskCode, const char * const pcName, const uint32_t ulStackDepth, void * const pvParameters, UBaseType_t uxPriority, StackType_t * const puxStackBuffer, StaticTask_t * const pxTaskBuffer ); +BaseType_t MPU_xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask ); +void MPU_vTaskAllocateMPURegions( TaskHandle_t xTask, const MemoryRegion_t * const pxRegions ); +void MPU_vTaskDelete( TaskHandle_t xTaskToDelete ); +void MPU_vTaskDelay( const TickType_t xTicksToDelay ); +void MPU_vTaskDelayUntil( TickType_t * const pxPreviousWakeTime, const TickType_t xTimeIncrement ); +BaseType_t MPU_xTaskAbortDelay( TaskHandle_t xTask ); +UBaseType_t MPU_uxTaskPriorityGet( TaskHandle_t xTask ); +eTaskState MPU_eTaskGetState( TaskHandle_t xTask ); +void MPU_vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState ); +void MPU_vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority ); +void MPU_vTaskSuspend( TaskHandle_t xTaskToSuspend ); +void MPU_vTaskResume( TaskHandle_t xTaskToResume ); +void MPU_vTaskStartScheduler( void ); +void MPU_vTaskSuspendAll( void ); +BaseType_t MPU_xTaskResumeAll( void ); +TickType_t MPU_xTaskGetTickCount( void ); +UBaseType_t MPU_uxTaskGetNumberOfTasks( void ); +char * MPU_pcTaskGetName( TaskHandle_t xTaskToQuery ); +TaskHandle_t MPU_xTaskGetHandle( const char *pcNameToQuery ); +UBaseType_t MPU_uxTaskGetStackHighWaterMark( TaskHandle_t xTask ); +void MPU_vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction ); +TaskHookFunction_t MPU_xTaskGetApplicationTaskTag( TaskHandle_t xTask ); +void MPU_vTaskSetThreadLocalStoragePointer( TaskHandle_t xTaskToSet, BaseType_t xIndex, void *pvValue ); +void * MPU_pvTaskGetThreadLocalStoragePointer( TaskHandle_t xTaskToQuery, BaseType_t xIndex ); +BaseType_t MPU_xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter ); +TaskHandle_t MPU_xTaskGetIdleTaskHandle( void ); +UBaseType_t MPU_uxTaskGetSystemState( TaskStatus_t * const pxTaskStatusArray, const UBaseType_t uxArraySize, uint32_t * const pulTotalRunTime ); +void MPU_vTaskList( char * pcWriteBuffer ); +void MPU_vTaskGetRunTimeStats( char *pcWriteBuffer ); +BaseType_t MPU_xTaskGenericNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue ); +BaseType_t MPU_xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait ); +uint32_t MPU_ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait ); +BaseType_t MPU_xTaskNotifyStateClear( TaskHandle_t xTask ); +BaseType_t MPU_xTaskIncrementTick( void ); +TaskHandle_t MPU_xTaskGetCurrentTaskHandle( void ); +void MPU_vTaskSetTimeOutState( TimeOut_t * const pxTimeOut ); +BaseType_t MPU_xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut, TickType_t * const pxTicksToWait ); +void MPU_vTaskMissedYield( void ); +BaseType_t MPU_xTaskGetSchedulerState( void ); + +/* MPU versions of queue.h API function. */ +BaseType_t MPU_xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition ); +BaseType_t MPU_xQueueGenericReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait, const BaseType_t xJustPeek ); +UBaseType_t MPU_uxQueueMessagesWaiting( const QueueHandle_t xQueue ); +UBaseType_t MPU_uxQueueSpacesAvailable( const QueueHandle_t xQueue ); +void MPU_vQueueDelete( QueueHandle_t xQueue ); +QueueHandle_t MPU_xQueueCreateMutex( const uint8_t ucQueueType ); +QueueHandle_t MPU_xQueueCreateMutexStatic( const uint8_t ucQueueType, StaticQueue_t *pxStaticQueue ); +QueueHandle_t MPU_xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount ); +QueueHandle_t MPU_xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount, StaticQueue_t *pxStaticQueue ); +void* MPU_xQueueGetMutexHolder( QueueHandle_t xSemaphore ); +BaseType_t MPU_xQueueTakeMutexRecursive( QueueHandle_t xMutex, TickType_t xTicksToWait ); +BaseType_t MPU_xQueueGiveMutexRecursive( QueueHandle_t pxMutex ); +void MPU_vQueueAddToRegistry( QueueHandle_t xQueue, const char *pcName ); +void MPU_vQueueUnregisterQueue( QueueHandle_t xQueue ); +const char * MPU_pcQueueGetName( QueueHandle_t xQueue ); +QueueHandle_t MPU_xQueueGenericCreate( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, const uint8_t ucQueueType ); +QueueHandle_t MPU_xQueueGenericCreateStatic( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, StaticQueue_t *pxStaticQueue, const uint8_t ucQueueType ); +QueueSetHandle_t MPU_xQueueCreateSet( const UBaseType_t uxEventQueueLength ); +BaseType_t MPU_xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ); +BaseType_t MPU_xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ); +QueueSetMemberHandle_t MPU_xQueueSelectFromSet( QueueSetHandle_t xQueueSet, const TickType_t xTicksToWait ); +BaseType_t MPU_xQueueGenericReset( QueueHandle_t xQueue, BaseType_t xNewQueue ); +void MPU_vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber ); +UBaseType_t MPU_uxQueueGetQueueNumber( QueueHandle_t xQueue ); +uint8_t MPU_ucQueueGetQueueType( QueueHandle_t xQueue ); + +/* MPU versions of timers.h API function. */ +TimerHandle_t MPU_xTimerCreate( const char * const pcTimerName, const TickType_t xTimerPeriodInTicks, const UBaseType_t uxAutoReload, void * const pvTimerID, TimerCallbackFunction_t pxCallbackFunction ); +TimerHandle_t MPU_xTimerCreateStatic( const char * const pcTimerName, const TickType_t xTimerPeriodInTicks, const UBaseType_t uxAutoReload, void * const pvTimerID, TimerCallbackFunction_t pxCallbackFunction, StaticTimer_t *pxTimerBuffer ); +void * MPU_pvTimerGetTimerID( const TimerHandle_t xTimer ); +void MPU_vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID ); +BaseType_t MPU_xTimerIsTimerActive( TimerHandle_t xTimer ); +TaskHandle_t MPU_xTimerGetTimerDaemonTaskHandle( void ); +BaseType_t MPU_xTimerPendFunctionCall( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, TickType_t xTicksToWait ); +const char * MPU_pcTimerGetName( TimerHandle_t xTimer ); +TickType_t MPU_xTimerGetPeriod( TimerHandle_t xTimer ); +TickType_t MPU_xTimerGetExpiryTime( TimerHandle_t xTimer ); +BaseType_t MPU_xTimerCreateTimerTask( void ); +BaseType_t MPU_xTimerGenericCommand( TimerHandle_t xTimer, const BaseType_t xCommandID, const TickType_t xOptionalValue, BaseType_t * const pxHigherPriorityTaskWoken, const TickType_t xTicksToWait ); + +/* MPU versions of event_group.h API function. */ +EventGroupHandle_t MPU_xEventGroupCreate( void ); +EventGroupHandle_t MPU_xEventGroupCreateStatic( StaticEventGroup_t *pxEventGroupBuffer ); +EventBits_t MPU_xEventGroupWaitBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToWaitFor, const BaseType_t xClearOnExit, const BaseType_t xWaitForAllBits, TickType_t xTicksToWait ); +EventBits_t MPU_xEventGroupClearBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToClear ); +EventBits_t MPU_xEventGroupSetBits( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet ); +EventBits_t MPU_xEventGroupSync( EventGroupHandle_t xEventGroup, const EventBits_t uxBitsToSet, const EventBits_t uxBitsToWaitFor, TickType_t xTicksToWait ); +void MPU_vEventGroupDelete( EventGroupHandle_t xEventGroup ); +UBaseType_t MPU_uxEventGroupGetNumber( void* xEventGroup ); + +#endif /* MPU_PROTOTYPES_H */ + diff --git a/Program/XLLC/FreeRTOS/include/mpu_wrappers.h b/Program/XLLC/FreeRTOS/include/mpu_wrappers.h new file mode 100644 index 0000000000000000000000000000000000000000..7d3334282deca72fd3fbd037735615950cc70e75 --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/mpu_wrappers.h @@ -0,0 +1,201 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +#ifndef MPU_WRAPPERS_H +#define MPU_WRAPPERS_H + +/* This file redefines API functions to be called through a wrapper macro, but +only for ports that are using the MPU. */ +#ifdef portUSING_MPU_WRAPPERS + + /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE will be defined when this file is + included from queue.c or task.c to prevent it from having an effect within + those files. */ + #ifndef MPU_WRAPPERS_INCLUDED_FROM_API_FILE + + /* + * Map standard (non MPU) API functions to equivalents that start + * "MPU_". This will cause the application code to call the MPU_ + * version, which wraps the non-MPU version with privilege promoting + * then demoting code, so the kernel code always runs will full + * privileges. + */ + + /* Map standard tasks.h API functions to the MPU equivalents. */ + #define xTaskCreate MPU_xTaskCreate + #define xTaskCreateStatic MPU_xTaskCreateStatic + #define xTaskCreateRestricted MPU_xTaskCreateRestricted + #define vTaskAllocateMPURegions MPU_vTaskAllocateMPURegions + #define vTaskDelete MPU_vTaskDelete + #define vTaskDelay MPU_vTaskDelay + #define vTaskDelayUntil MPU_vTaskDelayUntil + #define xTaskAbortDelay MPU_xTaskAbortDelay + #define uxTaskPriorityGet MPU_uxTaskPriorityGet + #define eTaskGetState MPU_eTaskGetState + #define vTaskGetInfo MPU_vTaskGetInfo + #define vTaskPrioritySet MPU_vTaskPrioritySet + #define vTaskSuspend MPU_vTaskSuspend + #define vTaskResume MPU_vTaskResume + #define vTaskSuspendAll MPU_vTaskSuspendAll + #define xTaskResumeAll MPU_xTaskResumeAll + #define xTaskGetTickCount MPU_xTaskGetTickCount + #define uxTaskGetNumberOfTasks MPU_uxTaskGetNumberOfTasks + #define pcTaskGetName MPU_pcTaskGetName + #define xTaskGetHandle MPU_xTaskGetHandle + #define uxTaskGetStackHighWaterMark MPU_uxTaskGetStackHighWaterMark + #define vTaskSetApplicationTaskTag MPU_vTaskSetApplicationTaskTag + #define xTaskGetApplicationTaskTag MPU_xTaskGetApplicationTaskTag + #define vTaskSetThreadLocalStoragePointer MPU_vTaskSetThreadLocalStoragePointer + #define pvTaskGetThreadLocalStoragePointer MPU_pvTaskGetThreadLocalStoragePointer + #define xTaskCallApplicationTaskHook MPU_xTaskCallApplicationTaskHook + #define xTaskGetIdleTaskHandle MPU_xTaskGetIdleTaskHandle + #define uxTaskGetSystemState MPU_uxTaskGetSystemState + #define vTaskList MPU_vTaskList + #define vTaskGetRunTimeStats MPU_vTaskGetRunTimeStats + #define xTaskGenericNotify MPU_xTaskGenericNotify + #define xTaskNotifyWait MPU_xTaskNotifyWait + #define ulTaskNotifyTake MPU_ulTaskNotifyTake + #define xTaskNotifyStateClear MPU_xTaskNotifyStateClear + + #define xTaskGetCurrentTaskHandle MPU_xTaskGetCurrentTaskHandle + #define vTaskSetTimeOutState MPU_vTaskSetTimeOutState + #define xTaskCheckForTimeOut MPU_xTaskCheckForTimeOut + #define xTaskGetSchedulerState MPU_xTaskGetSchedulerState + + /* Map standard queue.h API functions to the MPU equivalents. */ + #define xQueueGenericSend MPU_xQueueGenericSend + #define xQueueGenericReceive MPU_xQueueGenericReceive + #define uxQueueMessagesWaiting MPU_uxQueueMessagesWaiting + #define uxQueueSpacesAvailable MPU_uxQueueSpacesAvailable + #define vQueueDelete MPU_vQueueDelete + #define xQueueCreateMutex MPU_xQueueCreateMutex + #define xQueueCreateMutexStatic MPU_xQueueCreateMutexStatic + #define xQueueCreateCountingSemaphore MPU_xQueueCreateCountingSemaphore + #define xQueueCreateCountingSemaphoreStatic MPU_xQueueCreateCountingSemaphoreStatic + #define xQueueGetMutexHolder MPU_xQueueGetMutexHolder + #define xQueueTakeMutexRecursive MPU_xQueueTakeMutexRecursive + #define xQueueGiveMutexRecursive MPU_xQueueGiveMutexRecursive + #define xQueueGenericCreate MPU_xQueueGenericCreate + #define xQueueGenericCreateStatic MPU_xQueueGenericCreateStatic + #define xQueueCreateSet MPU_xQueueCreateSet + #define xQueueAddToSet MPU_xQueueAddToSet + #define xQueueRemoveFromSet MPU_xQueueRemoveFromSet + #define xQueueSelectFromSet MPU_xQueueSelectFromSet + #define xQueueGenericReset MPU_xQueueGenericReset + + #if( configQUEUE_REGISTRY_SIZE > 0 ) + #define vQueueAddToRegistry MPU_vQueueAddToRegistry + #define vQueueUnregisterQueue MPU_vQueueUnregisterQueue + #define pcQueueGetName MPU_pcQueueGetName + #endif + + /* Map standard timer.h API functions to the MPU equivalents. */ + #define xTimerCreate MPU_xTimerCreate + #define xTimerCreateStatic MPU_xTimerCreateStatic + #define pvTimerGetTimerID MPU_pvTimerGetTimerID + #define vTimerSetTimerID MPU_vTimerSetTimerID + #define xTimerIsTimerActive MPU_xTimerIsTimerActive + #define xTimerGetTimerDaemonTaskHandle MPU_xTimerGetTimerDaemonTaskHandle + #define xTimerPendFunctionCall MPU_xTimerPendFunctionCall + #define pcTimerGetName MPU_pcTimerGetName + #define xTimerGetPeriod MPU_xTimerGetPeriod + #define xTimerGetExpiryTime MPU_xTimerGetExpiryTime + #define xTimerGenericCommand MPU_xTimerGenericCommand + + /* Map standard event_group.h API functions to the MPU equivalents. */ + #define xEventGroupCreate MPU_xEventGroupCreate + #define xEventGroupCreateStatic MPU_xEventGroupCreateStatic + #define xEventGroupWaitBits MPU_xEventGroupWaitBits + #define xEventGroupClearBits MPU_xEventGroupClearBits + #define xEventGroupSetBits MPU_xEventGroupSetBits + #define xEventGroupSync MPU_xEventGroupSync + #define vEventGroupDelete MPU_vEventGroupDelete + + /* Remove the privileged function macro. */ + #define PRIVILEGED_FUNCTION + + #else /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */ + + /* Ensure API functions go in the privileged execution section. */ + #define PRIVILEGED_FUNCTION __attribute__((section("privileged_functions"))) + #define PRIVILEGED_DATA __attribute__((section("privileged_data"))) + + #endif /* MPU_WRAPPERS_INCLUDED_FROM_API_FILE */ + +#else /* portUSING_MPU_WRAPPERS */ + + #define PRIVILEGED_FUNCTION + #define PRIVILEGED_DATA + #define portUSING_MPU_WRAPPERS 0 + +#endif /* portUSING_MPU_WRAPPERS */ + + +#endif /* MPU_WRAPPERS_H */ + diff --git a/Program/XLLC/FreeRTOS/include/portable.h b/Program/XLLC/FreeRTOS/include/portable.h new file mode 100644 index 0000000000000000000000000000000000000000..177130cd9be49b63e4916f43afc89844f3fa1288 --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/portable.h @@ -0,0 +1,207 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +/*----------------------------------------------------------- + * Portable layer API. Each function must be defined for each port. + *----------------------------------------------------------*/ + +#ifndef PORTABLE_H +#define PORTABLE_H + +/* Each FreeRTOS port has a unique portmacro.h header file. Originally a +pre-processor definition was used to ensure the pre-processor found the correct +portmacro.h file for the port being used. That scheme was deprecated in favour +of setting the compiler's include path such that it found the correct +portmacro.h file - removing the need for the constant and allowing the +portmacro.h file to be located anywhere in relation to the port being used. +Purely for reasons of backward compatibility the old method is still valid, but +to make it clear that new projects should not use it, support for the port +specific constants has been moved into the deprecated_definitions.h header +file. */ +#include "deprecated_definitions.h" + +/* If portENTER_CRITICAL is not defined then including deprecated_definitions.h +did not result in a portmacro.h header file being included - and it should be +included here. In this case the path to the correct portmacro.h header file +must be set in the compiler's include path. */ +#ifndef portENTER_CRITICAL + #include "portmacro.h" +#endif + +#if portBYTE_ALIGNMENT == 32 + #define portBYTE_ALIGNMENT_MASK ( 0x001f ) +#endif + +#if portBYTE_ALIGNMENT == 16 + #define portBYTE_ALIGNMENT_MASK ( 0x000f ) +#endif + +#if portBYTE_ALIGNMENT == 8 + #define portBYTE_ALIGNMENT_MASK ( 0x0007 ) +#endif + +#if portBYTE_ALIGNMENT == 4 + #define portBYTE_ALIGNMENT_MASK ( 0x0003 ) +#endif + +#if portBYTE_ALIGNMENT == 2 + #define portBYTE_ALIGNMENT_MASK ( 0x0001 ) +#endif + +#if portBYTE_ALIGNMENT == 1 + #define portBYTE_ALIGNMENT_MASK ( 0x0000 ) +#endif + +#ifndef portBYTE_ALIGNMENT_MASK + #error "Invalid portBYTE_ALIGNMENT definition" +#endif + +#ifndef portNUM_CONFIGURABLE_REGIONS + #define portNUM_CONFIGURABLE_REGIONS 1 +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +#include "mpu_wrappers.h" + +/* + * Setup the stack of a new task so it is ready to be placed under the + * scheduler control. The registers have to be placed on the stack in + * the order that the port expects to find them. + * + */ +#if( portUSING_MPU_WRAPPERS == 1 ) + StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged ) PRIVILEGED_FUNCTION; +#else + StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) PRIVILEGED_FUNCTION; +#endif + +/* Used by heap_5.c. */ +typedef struct HeapRegion +{ + uint8_t *pucStartAddress; + size_t xSizeInBytes; +} HeapRegion_t; + +/* + * Used to define multiple heap regions for use by heap_5.c. This function + * must be called before any calls to pvPortMalloc() - not creating a task, + * queue, semaphore, mutex, software timer, event group, etc. will result in + * pvPortMalloc being called. + * + * pxHeapRegions passes in an array of HeapRegion_t structures - each of which + * defines a region of memory that can be used as the heap. The array is + * terminated by a HeapRegions_t structure that has a size of 0. The region + * with the lowest start address must appear first in the array. + */ +void vPortDefineHeapRegions( const HeapRegion_t * const pxHeapRegions ) PRIVILEGED_FUNCTION; + + +/* + * Map to the memory management routines required for the port. + */ +void *pvPortMalloc( size_t xSize ) PRIVILEGED_FUNCTION; +void vPortFree( void *pv ) PRIVILEGED_FUNCTION; +void vPortInitialiseBlocks( void ) PRIVILEGED_FUNCTION; +size_t xPortGetFreeHeapSize( void ) PRIVILEGED_FUNCTION; +size_t xPortGetMinimumEverFreeHeapSize( void ) PRIVILEGED_FUNCTION; + +/* + * Setup the hardware ready for the scheduler to take control. This generally + * sets up a tick interrupt and sets timers for the correct tick frequency. + */ +BaseType_t xPortStartScheduler( void ) PRIVILEGED_FUNCTION; + +/* + * Undo any hardware/ISR setup that was performed by xPortStartScheduler() so + * the hardware is left in its original condition after the scheduler stops + * executing. + */ +void vPortEndScheduler( void ) PRIVILEGED_FUNCTION; + +/* + * The structures and methods of manipulating the MPU are contained within the + * port layer. + * + * Fills the xMPUSettings structure with the memory region information + * contained in xRegions. + */ +#if( portUSING_MPU_WRAPPERS == 1 ) + struct xMEMORY_REGION; + void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth ) PRIVILEGED_FUNCTION; +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PORTABLE_H */ + diff --git a/Program/XLLC/FreeRTOS/include/projdefs.h b/Program/XLLC/FreeRTOS/include/projdefs.h new file mode 100644 index 0000000000000000000000000000000000000000..0da6f1bbe497cafaf7fa07cf5f6490cefd17110b --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/projdefs.h @@ -0,0 +1,161 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +#ifndef PROJDEFS_H +#define PROJDEFS_H + +/* + * Defines the prototype to which task functions must conform. Defined in this + * file to ensure the type is known before portable.h is included. + */ +typedef void (*TaskFunction_t)( void * ); + +/* Converts a time in milliseconds to a time in ticks. This macro can be +overridden by a macro of the same name defined in FreeRTOSConfig.h in case the +definition here is not suitable for your application. */ +#ifndef pdMS_TO_TICKS + #define pdMS_TO_TICKS( xTimeInMs ) ( ( TickType_t ) ( ( ( TickType_t ) ( xTimeInMs ) * ( TickType_t ) configTICK_RATE_HZ ) / ( TickType_t ) 1000 ) ) +#endif + +#define pdFALSE ( ( BaseType_t ) 0 ) +#define pdTRUE ( ( BaseType_t ) 1 ) + +#define pdPASS ( pdTRUE ) +#define pdFAIL ( pdFALSE ) +#define errQUEUE_EMPTY ( ( BaseType_t ) 0 ) +#define errQUEUE_FULL ( ( BaseType_t ) 0 ) + +/* FreeRTOS error definitions. */ +#define errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY ( -1 ) +#define errQUEUE_BLOCKED ( -4 ) +#define errQUEUE_YIELD ( -5 ) + +/* Macros used for basic data corruption checks. */ +#ifndef configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES + #define configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES 0 +#endif + +#if( configUSE_16_BIT_TICKS == 1 ) + #define pdINTEGRITY_CHECK_VALUE 0x5a5a +#else + #define pdINTEGRITY_CHECK_VALUE 0x5a5a5a5aUL +#endif + +/* The following errno values are used by FreeRTOS+ components, not FreeRTOS +itself. */ +#define pdFREERTOS_ERRNO_NONE 0 /* No errors */ +#define pdFREERTOS_ERRNO_ENOENT 2 /* No such file or directory */ +#define pdFREERTOS_ERRNO_EINTR 4 /* Interrupted system call */ +#define pdFREERTOS_ERRNO_EIO 5 /* I/O error */ +#define pdFREERTOS_ERRNO_ENXIO 6 /* No such device or address */ +#define pdFREERTOS_ERRNO_EBADF 9 /* Bad file number */ +#define pdFREERTOS_ERRNO_EAGAIN 11 /* No more processes */ +#define pdFREERTOS_ERRNO_EWOULDBLOCK 11 /* Operation would block */ +#define pdFREERTOS_ERRNO_ENOMEM 12 /* Not enough memory */ +#define pdFREERTOS_ERRNO_EACCES 13 /* Permission denied */ +#define pdFREERTOS_ERRNO_EFAULT 14 /* Bad address */ +#define pdFREERTOS_ERRNO_EBUSY 16 /* Mount device busy */ +#define pdFREERTOS_ERRNO_EEXIST 17 /* File exists */ +#define pdFREERTOS_ERRNO_EXDEV 18 /* Cross-device link */ +#define pdFREERTOS_ERRNO_ENODEV 19 /* No such device */ +#define pdFREERTOS_ERRNO_ENOTDIR 20 /* Not a directory */ +#define pdFREERTOS_ERRNO_EISDIR 21 /* Is a directory */ +#define pdFREERTOS_ERRNO_EINVAL 22 /* Invalid argument */ +#define pdFREERTOS_ERRNO_ENOSPC 28 /* No space left on device */ +#define pdFREERTOS_ERRNO_ESPIPE 29 /* Illegal seek */ +#define pdFREERTOS_ERRNO_EROFS 30 /* Read only file system */ +#define pdFREERTOS_ERRNO_EUNATCH 42 /* Protocol driver not attached */ +#define pdFREERTOS_ERRNO_EBADE 50 /* Invalid exchange */ +#define pdFREERTOS_ERRNO_EFTYPE 79 /* Inappropriate file type or format */ +#define pdFREERTOS_ERRNO_ENMFILE 89 /* No more files */ +#define pdFREERTOS_ERRNO_ENOTEMPTY 90 /* Directory not empty */ +#define pdFREERTOS_ERRNO_ENAMETOOLONG 91 /* File or path name too long */ +#define pdFREERTOS_ERRNO_EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ +#define pdFREERTOS_ERRNO_ENOBUFS 105 /* No buffer space available */ +#define pdFREERTOS_ERRNO_ENOPROTOOPT 109 /* Protocol not available */ +#define pdFREERTOS_ERRNO_EADDRINUSE 112 /* Address already in use */ +#define pdFREERTOS_ERRNO_ETIMEDOUT 116 /* Connection timed out */ +#define pdFREERTOS_ERRNO_EINPROGRESS 119 /* Connection already in progress */ +#define pdFREERTOS_ERRNO_EALREADY 120 /* Socket already connected */ +#define pdFREERTOS_ERRNO_EADDRNOTAVAIL 125 /* Address not available */ +#define pdFREERTOS_ERRNO_EISCONN 127 /* Socket is already connected */ +#define pdFREERTOS_ERRNO_ENOTCONN 128 /* Socket is not connected */ +#define pdFREERTOS_ERRNO_ENOMEDIUM 135 /* No medium inserted */ +#define pdFREERTOS_ERRNO_EILSEQ 138 /* An invalid UTF-16 sequence was encountered. */ +#define pdFREERTOS_ERRNO_ECANCELED 140 /* Operation canceled. */ + +/* The following endian values are used by FreeRTOS+ components, not FreeRTOS +itself. */ +#define pdFREERTOS_LITTLE_ENDIAN 0 +#define pdFREERTOS_BIG_ENDIAN 1 + +#endif /* PROJDEFS_H */ + + + diff --git a/Program/XLLC/FreeRTOS/include/queue.h b/Program/XLLC/FreeRTOS/include/queue.h new file mode 100644 index 0000000000000000000000000000000000000000..b96ed5b38a599cb38428bf5df9d1d4565fbc3304 --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/queue.h @@ -0,0 +1,1798 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + + +#ifndef QUEUE_H +#define QUEUE_H + +#ifndef INC_FREERTOS_H + #error "include FreeRTOS.h" must appear in source files before "include queue.h" +#endif + +#ifdef __cplusplus +extern "C" { +#endif + + +/** + * Type by which queues are referenced. For example, a call to xQueueCreate() + * returns an QueueHandle_t variable that can then be used as a parameter to + * xQueueSend(), xQueueReceive(), etc. + */ +typedef void * QueueHandle_t; + +/** + * Type by which queue sets are referenced. For example, a call to + * xQueueCreateSet() returns an xQueueSet variable that can then be used as a + * parameter to xQueueSelectFromSet(), xQueueAddToSet(), etc. + */ +typedef void * QueueSetHandle_t; + +/** + * Queue sets can contain both queues and semaphores, so the + * QueueSetMemberHandle_t is defined as a type to be used where a parameter or + * return value can be either an QueueHandle_t or an SemaphoreHandle_t. + */ +typedef void * QueueSetMemberHandle_t; + +/* For internal use only. */ +#define queueSEND_TO_BACK ( ( BaseType_t ) 0 ) +#define queueSEND_TO_FRONT ( ( BaseType_t ) 1 ) +#define queueOVERWRITE ( ( BaseType_t ) 2 ) + +/* For internal use only. These definitions *must* match those in queue.c. */ +#define queueQUEUE_TYPE_BASE ( ( uint8_t ) 0U ) +#define queueQUEUE_TYPE_SET ( ( uint8_t ) 0U ) +#define queueQUEUE_TYPE_MUTEX ( ( uint8_t ) 1U ) +#define queueQUEUE_TYPE_COUNTING_SEMAPHORE ( ( uint8_t ) 2U ) +#define queueQUEUE_TYPE_BINARY_SEMAPHORE ( ( uint8_t ) 3U ) +#define queueQUEUE_TYPE_RECURSIVE_MUTEX ( ( uint8_t ) 4U ) + +/** + * queue. h + * 
+ QueueHandle_t xQueueCreate(
+							  UBaseType_t uxQueueLength,
+							  UBaseType_t uxItemSize
+						  );
+ *
+ * + * Creates a new queue instance, and returns a handle by which the new queue + * can be referenced. + * + * Internally, within the FreeRTOS implementation, queues use two blocks of + * memory. The first block is used to hold the queue's data structures. The + * second block is used to hold items placed into the queue. If a queue is + * created using xQueueCreate() then both blocks of memory are automatically + * dynamically allocated inside the xQueueCreate() function. (see + * http://www.freertos.org/a00111.html). If a queue is created using + * xQueueCreateStatic() then the application writer must provide the memory that + * will get used by the queue. xQueueCreateStatic() therefore allows a queue to + * be created without using any dynamic memory allocation. + * + * http://www.FreeRTOS.org/Embedded-RTOS-Queues.html + * + * @param uxQueueLength The maximum number of items that the queue can contain. + * + * @param uxItemSize The number of bytes each item in the queue will require. + * Items are queued by copy, not by reference, so this is the number of bytes + * that will be copied for each posted item. Each item on the queue must be + * the same size. + * + * @return If the queue is successfully create then a handle to the newly + * created queue is returned. If the queue cannot be created then 0 is + * returned. + * + * Example usage: + 
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ };
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+	if( xQueue1 == 0 )
+	{
+		// Queue was not created and must not be used.
+	}
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+	if( xQueue2 == 0 )
+	{
+		// Queue was not created and must not be used.
+	}
+
+	// ... Rest of task code.
+ }
+
+ * \defgroup xQueueCreate xQueueCreate + * \ingroup QueueManagement + */ +#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + #define xQueueCreate( uxQueueLength, uxItemSize ) xQueueGenericCreate( ( uxQueueLength ), ( uxItemSize ), ( queueQUEUE_TYPE_BASE ) ) +#endif + +/** + * queue. h + * 
+ QueueHandle_t xQueueCreateStatic(
+							  UBaseType_t uxQueueLength,
+							  UBaseType_t uxItemSize,
+							  uint8_t *pucQueueStorageBuffer,
+							  StaticQueue_t *pxQueueBuffer
+						  );
+ *
+ * + * Creates a new queue instance, and returns a handle by which the new queue + * can be referenced. + * + * Internally, within the FreeRTOS implementation, queues use two blocks of + * memory. The first block is used to hold the queue's data structures. The + * second block is used to hold items placed into the queue. If a queue is + * created using xQueueCreate() then both blocks of memory are automatically + * dynamically allocated inside the xQueueCreate() function. (see + * http://www.freertos.org/a00111.html). If a queue is created using + * xQueueCreateStatic() then the application writer must provide the memory that + * will get used by the queue. xQueueCreateStatic() therefore allows a queue to + * be created without using any dynamic memory allocation. + * + * http://www.FreeRTOS.org/Embedded-RTOS-Queues.html + * + * @param uxQueueLength The maximum number of items that the queue can contain. + * + * @param uxItemSize The number of bytes each item in the queue will require. + * Items are queued by copy, not by reference, so this is the number of bytes + * that will be copied for each posted item. Each item on the queue must be + * the same size. + * + * @param pucQueueStorageBuffer If uxItemSize is not zero then + * pucQueueStorageBuffer must point to a uint8_t array that is at least large + * enough to hold the maximum number of items that can be in the queue at any + * one time - which is ( uxQueueLength * uxItemsSize ) bytes. If uxItemSize is + * zero then pucQueueStorageBuffer can be NULL. + * + * @param pxQueueBuffer Must point to a variable of type StaticQueue_t, which + * will be used to hold the queue's data structure. + * + * @return If the queue is created then a handle to the created queue is + * returned. If pxQueueBuffer is NULL then NULL is returned. + * + * Example usage: + 
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ };
+
+ #define QUEUE_LENGTH 10
+ #define ITEM_SIZE sizeof( uint32_t )
+
+ // xQueueBuffer will hold the queue structure.
+ StaticQueue_t xQueueBuffer;
+
+ // ucQueueStorage will hold the items posted to the queue.  Must be at least
+ // [(queue length) * ( queue item size)] bytes long.
+ uint8_t ucQueueStorage[ QUEUE_LENGTH * ITEM_SIZE ];
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( QUEUE_LENGTH, // The number of items the queue can hold.
+							ITEM_SIZE	  // The size of each item in the queue
+							&( ucQueueStorage[ 0 ] ), // The buffer that will hold the items in the queue.
+							&xQueueBuffer ); // The buffer that will hold the queue structure.
+
+	// The queue is guaranteed to be created successfully as no dynamic memory
+	// allocation is used.  Therefore xQueue1 is now a handle to a valid queue.
+
+	// ... Rest of task code.
+ }
+
+ * \defgroup xQueueCreateStatic xQueueCreateStatic + * \ingroup QueueManagement + */ +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + #define xQueueCreateStatic( uxQueueLength, uxItemSize, pucQueueStorage, pxQueueBuffer ) xQueueGenericCreateStatic( ( uxQueueLength ), ( uxItemSize ), ( pucQueueStorage ), ( pxQueueBuffer ), ( queueQUEUE_TYPE_BASE ) ) +#endif /* configSUPPORT_STATIC_ALLOCATION */ + +/** + * queue. h + * 
+ BaseType_t xQueueSendToToFront(
+								   QueueHandle_t	xQueue,
+								   const void		*pvItemToQueue,
+								   TickType_t		xTicksToWait
+							   );
+ *
+ * + * This is a macro that calls xQueueGenericSend(). + * + * Post an item to the front of a queue. The item is queued by copy, not by + * reference. This function must not be called from an interrupt service + * routine. See xQueueSendFromISR () for an alternative which may be used + * in an ISR. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @param xTicksToWait The maximum amount of time the task should block + * waiting for space to become available on the queue, should it already + * be full. The call will return immediately if this is set to 0 and the + * queue is full. The time is defined in tick periods so the constant + * portTICK_PERIOD_MS should be used to convert to real time if this is required. + * + * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL. + * + * Example usage: + 
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+	// ...
+
+	if( xQueue1 != 0 )
+	{
+		// Send an uint32_t.  Wait for 10 ticks for space to become
+		// available if necessary.
+		if( xQueueSendToFront( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10 ) != pdPASS )
+		{
+			// Failed to post the message, even after 10 ticks.
+		}
+	}
+
+	if( xQueue2 != 0 )
+	{
+		// Send a pointer to a struct AMessage object.  Don't block if the
+		// queue is already full.
+		pxMessage = & xMessage;
+		xQueueSendToFront( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0 );
+	}
+
+	// ... Rest of task code.
+ }
+
+ * \defgroup xQueueSend xQueueSend + * \ingroup QueueManagement + */ +#define xQueueSendToFront( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_FRONT ) + +/** + * queue. h + * 
+ BaseType_t xQueueSendToBack(
+								   QueueHandle_t	xQueue,
+								   const void		*pvItemToQueue,
+								   TickType_t		xTicksToWait
+							   );
+ *
+ * + * This is a macro that calls xQueueGenericSend(). + * + * Post an item to the back of a queue. The item is queued by copy, not by + * reference. This function must not be called from an interrupt service + * routine. See xQueueSendFromISR () for an alternative which may be used + * in an ISR. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @param xTicksToWait The maximum amount of time the task should block + * waiting for space to become available on the queue, should it already + * be full. The call will return immediately if this is set to 0 and the queue + * is full. The time is defined in tick periods so the constant + * portTICK_PERIOD_MS should be used to convert to real time if this is required. + * + * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL. + * + * Example usage: + 
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+	// ...
+
+	if( xQueue1 != 0 )
+	{
+		// Send an uint32_t.  Wait for 10 ticks for space to become
+		// available if necessary.
+		if( xQueueSendToBack( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10 ) != pdPASS )
+		{
+			// Failed to post the message, even after 10 ticks.
+		}
+	}
+
+	if( xQueue2 != 0 )
+	{
+		// Send a pointer to a struct AMessage object.  Don't block if the
+		// queue is already full.
+		pxMessage = & xMessage;
+		xQueueSendToBack( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0 );
+	}
+
+	// ... Rest of task code.
+ }
+
+ * \defgroup xQueueSend xQueueSend + * \ingroup QueueManagement + */ +#define xQueueSendToBack( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK ) + +/** + * queue. h + * 
+ BaseType_t xQueueSend(
+							  QueueHandle_t xQueue,
+							  const void * pvItemToQueue,
+							  TickType_t xTicksToWait
+						 );
+ *
+ * + * This is a macro that calls xQueueGenericSend(). It is included for + * backward compatibility with versions of FreeRTOS.org that did not + * include the xQueueSendToFront() and xQueueSendToBack() macros. It is + * equivalent to xQueueSendToBack(). + * + * Post an item on a queue. The item is queued by copy, not by reference. + * This function must not be called from an interrupt service routine. + * See xQueueSendFromISR () for an alternative which may be used in an ISR. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @param xTicksToWait The maximum amount of time the task should block + * waiting for space to become available on the queue, should it already + * be full. The call will return immediately if this is set to 0 and the + * queue is full. The time is defined in tick periods so the constant + * portTICK_PERIOD_MS should be used to convert to real time if this is required. + * + * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL. + * + * Example usage: + 
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+	// ...
+
+	if( xQueue1 != 0 )
+	{
+		// Send an uint32_t.  Wait for 10 ticks for space to become
+		// available if necessary.
+		if( xQueueSend( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10 ) != pdPASS )
+		{
+			// Failed to post the message, even after 10 ticks.
+		}
+	}
+
+	if( xQueue2 != 0 )
+	{
+		// Send a pointer to a struct AMessage object.  Don't block if the
+		// queue is already full.
+		pxMessage = & xMessage;
+		xQueueSend( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0 );
+	}
+
+	// ... Rest of task code.
+ }
+
+ * \defgroup xQueueSend xQueueSend + * \ingroup QueueManagement + */ +#define xQueueSend( xQueue, pvItemToQueue, xTicksToWait ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), ( xTicksToWait ), queueSEND_TO_BACK ) + +/** + * queue. h + * 
+ BaseType_t xQueueOverwrite(
+							  QueueHandle_t xQueue,
+							  const void * pvItemToQueue
+						 );
+ *
+ * + * Only for use with queues that have a length of one - so the queue is either + * empty or full. + * + * Post an item on a queue. If the queue is already full then overwrite the + * value held in the queue. The item is queued by copy, not by reference. + * + * This function must not be called from an interrupt service routine. + * See xQueueOverwriteFromISR () for an alternative which may be used in an ISR. + * + * @param xQueue The handle of the queue to which the data is being sent. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @return xQueueOverwrite() is a macro that calls xQueueGenericSend(), and + * therefore has the same return values as xQueueSendToFront(). However, pdPASS + * is the only value that can be returned because xQueueOverwrite() will write + * to the queue even when the queue is already full. + * + * Example usage: + 
+
+ void vFunction( void *pvParameters )
+ {
+ QueueHandle_t xQueue;
+ uint32_t ulVarToSend, ulValReceived;
+
+	// Create a queue to hold one uint32_t value.  It is strongly
+	// recommended *not* to use xQueueOverwrite() on queues that can
+	// contain more than one value, and doing so will trigger an assertion
+	// if configASSERT() is defined.
+	xQueue = xQueueCreate( 1, sizeof( uint32_t ) );
+
+	// Write the value 10 to the queue using xQueueOverwrite().
+	ulVarToSend = 10;
+	xQueueOverwrite( xQueue, &ulVarToSend );
+
+	// Peeking the queue should now return 10, but leave the value 10 in
+	// the queue.  A block time of zero is used as it is known that the
+	// queue holds a value.
+	ulValReceived = 0;
+	xQueuePeek( xQueue, &ulValReceived, 0 );
+
+	if( ulValReceived != 10 )
+	{
+		// Error unless the item was removed by a different task.
+	}
+
+	// The queue is still full.  Use xQueueOverwrite() to overwrite the
+	// value held in the queue with 100.
+	ulVarToSend = 100;
+	xQueueOverwrite( xQueue, &ulVarToSend );
+
+	// This time read from the queue, leaving the queue empty once more.
+	// A block time of 0 is used again.
+	xQueueReceive( xQueue, &ulValReceived, 0 );
+
+	// The value read should be the last value written, even though the
+	// queue was already full when the value was written.
+	if( ulValReceived != 100 )
+	{
+		// Error!
+	}
+
+	// ...
+}
+
+ * \defgroup xQueueOverwrite xQueueOverwrite + * \ingroup QueueManagement + */ +#define xQueueOverwrite( xQueue, pvItemToQueue ) xQueueGenericSend( ( xQueue ), ( pvItemToQueue ), 0, queueOVERWRITE ) + + +/** + * queue. h + * 
+ BaseType_t xQueueGenericSend(
+									QueueHandle_t xQueue,
+									const void * pvItemToQueue,
+									TickType_t xTicksToWait
+									BaseType_t xCopyPosition
+								);
+ *
+ * + * It is preferred that the macros xQueueSend(), xQueueSendToFront() and + * xQueueSendToBack() are used in place of calling this function directly. + * + * Post an item on a queue. The item is queued by copy, not by reference. + * This function must not be called from an interrupt service routine. + * See xQueueSendFromISR () for an alternative which may be used in an ISR. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @param xTicksToWait The maximum amount of time the task should block + * waiting for space to become available on the queue, should it already + * be full. The call will return immediately if this is set to 0 and the + * queue is full. The time is defined in tick periods so the constant + * portTICK_PERIOD_MS should be used to convert to real time if this is required. + * + * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the + * item at the back of the queue, or queueSEND_TO_FRONT to place the item + * at the front of the queue (for high priority messages). + * + * @return pdTRUE if the item was successfully posted, otherwise errQUEUE_FULL. + * + * Example usage: + 
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ uint32_t ulVar = 10UL;
+
+ void vATask( void *pvParameters )
+ {
+ QueueHandle_t xQueue1, xQueue2;
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 uint32_t values.
+	xQueue1 = xQueueCreate( 10, sizeof( uint32_t ) );
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue2 = xQueueCreate( 10, sizeof( struct AMessage * ) );
+
+	// ...
+
+	if( xQueue1 != 0 )
+	{
+		// Send an uint32_t.  Wait for 10 ticks for space to become
+		// available if necessary.
+		if( xQueueGenericSend( xQueue1, ( void * ) &ulVar, ( TickType_t ) 10, queueSEND_TO_BACK ) != pdPASS )
+		{
+			// Failed to post the message, even after 10 ticks.
+		}
+	}
+
+	if( xQueue2 != 0 )
+	{
+		// Send a pointer to a struct AMessage object.  Don't block if the
+		// queue is already full.
+		pxMessage = & xMessage;
+		xQueueGenericSend( xQueue2, ( void * ) &pxMessage, ( TickType_t ) 0, queueSEND_TO_BACK );
+	}
+
+	// ... Rest of task code.
+ }
+
+ * \defgroup xQueueSend xQueueSend + * \ingroup QueueManagement + */ +BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION; + +/** + * queue. h + * 
+ BaseType_t xQueuePeek(
+							 QueueHandle_t xQueue,
+							 void *pvBuffer,
+							 TickType_t xTicksToWait
+						 );
+ * + * This is a macro that calls the xQueueGenericReceive() function. + * + * Receive an item from a queue without removing the item from the queue. + * The item is received by copy so a buffer of adequate size must be + * provided. The number of bytes copied into the buffer was defined when + * the queue was created. + * + * Successfully received items remain on the queue so will be returned again + * by the next call, or a call to xQueueReceive(). + * + * This macro must not be used in an interrupt service routine. See + * xQueuePeekFromISR() for an alternative that can be called from an interrupt + * service routine. + * + * @param xQueue The handle to the queue from which the item is to be + * received. + * + * @param pvBuffer Pointer to the buffer into which the received item will + * be copied. + * + * @param xTicksToWait The maximum amount of time the task should block + * waiting for an item to receive should the queue be empty at the time + * of the call. The time is defined in tick periods so the constant + * portTICK_PERIOD_MS should be used to convert to real time if this is required. + * xQueuePeek() will return immediately if xTicksToWait is 0 and the queue + * is empty. + * + * @return pdTRUE if an item was successfully received from the queue, + * otherwise pdFALSE. + * + * Example usage: + 
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ QueueHandle_t xQueue;
+
+ // Task to create a queue and post a value.
+ void vATask( void *pvParameters )
+ {
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
+	if( xQueue == 0 )
+	{
+		// Failed to create the queue.
+	}
+
+	// ...
+
+	// Send a pointer to a struct AMessage object.  Don't block if the
+	// queue is already full.
+	pxMessage = & xMessage;
+	xQueueSend( xQueue, ( void * ) &pxMessage, ( TickType_t ) 0 );
+
+	// ... Rest of task code.
+ }
+
+ // Task to peek the data from the queue.
+ void vADifferentTask( void *pvParameters )
+ {
+ struct AMessage *pxRxedMessage;
+
+	if( xQueue != 0 )
+	{
+		// Peek a message on the created queue.  Block for 10 ticks if a
+		// message is not immediately available.
+		if( xQueuePeek( xQueue, &( pxRxedMessage ), ( TickType_t ) 10 ) )
+		{
+			// pcRxedMessage now points to the struct AMessage variable posted
+			// by vATask, but the item still remains on the queue.
+		}
+	}
+
+	// ... Rest of task code.
+ }
+
+ * \defgroup xQueueReceive xQueueReceive + * \ingroup QueueManagement + */ +#define xQueuePeek( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdTRUE ) + +/** + * queue. h + * 
+ BaseType_t xQueuePeekFromISR(
+									QueueHandle_t xQueue,
+									void *pvBuffer,
+								);
+ * + * A version of xQueuePeek() that can be called from an interrupt service + * routine (ISR). + * + * Receive an item from a queue without removing the item from the queue. + * The item is received by copy so a buffer of adequate size must be + * provided. The number of bytes copied into the buffer was defined when + * the queue was created. + * + * Successfully received items remain on the queue so will be returned again + * by the next call, or a call to xQueueReceive(). + * + * @param xQueue The handle to the queue from which the item is to be + * received. + * + * @param pvBuffer Pointer to the buffer into which the received item will + * be copied. + * + * @return pdTRUE if an item was successfully received from the queue, + * otherwise pdFALSE. + * + * \defgroup xQueuePeekFromISR xQueuePeekFromISR + * \ingroup QueueManagement + */ +BaseType_t xQueuePeekFromISR( QueueHandle_t xQueue, void * const pvBuffer ) PRIVILEGED_FUNCTION; + +/** + * queue. h + * 
+ BaseType_t xQueueReceive(
+								 QueueHandle_t xQueue,
+								 void *pvBuffer,
+								 TickType_t xTicksToWait
+							);
+ * + * This is a macro that calls the xQueueGenericReceive() function. + * + * Receive an item from a queue. The item is received by copy so a buffer of + * adequate size must be provided. The number of bytes copied into the buffer + * was defined when the queue was created. + * + * Successfully received items are removed from the queue. + * + * This function must not be used in an interrupt service routine. See + * xQueueReceiveFromISR for an alternative that can. + * + * @param xQueue The handle to the queue from which the item is to be + * received. + * + * @param pvBuffer Pointer to the buffer into which the received item will + * be copied. + * + * @param xTicksToWait The maximum amount of time the task should block + * waiting for an item to receive should the queue be empty at the time + * of the call. xQueueReceive() will return immediately if xTicksToWait + * is zero and the queue is empty. The time is defined in tick periods so the + * constant portTICK_PERIOD_MS should be used to convert to real time if this is + * required. + * + * @return pdTRUE if an item was successfully received from the queue, + * otherwise pdFALSE. + * + * Example usage: + 
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ QueueHandle_t xQueue;
+
+ // Task to create a queue and post a value.
+ void vATask( void *pvParameters )
+ {
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
+	if( xQueue == 0 )
+	{
+		// Failed to create the queue.
+	}
+
+	// ...
+
+	// Send a pointer to a struct AMessage object.  Don't block if the
+	// queue is already full.
+	pxMessage = & xMessage;
+	xQueueSend( xQueue, ( void * ) &pxMessage, ( TickType_t ) 0 );
+
+	// ... Rest of task code.
+ }
+
+ // Task to receive from the queue.
+ void vADifferentTask( void *pvParameters )
+ {
+ struct AMessage *pxRxedMessage;
+
+	if( xQueue != 0 )
+	{
+		// Receive a message on the created queue.  Block for 10 ticks if a
+		// message is not immediately available.
+		if( xQueueReceive( xQueue, &( pxRxedMessage ), ( TickType_t ) 10 ) )
+		{
+			// pcRxedMessage now points to the struct AMessage variable posted
+			// by vATask.
+		}
+	}
+
+	// ... Rest of task code.
+ }
+
+ * \defgroup xQueueReceive xQueueReceive + * \ingroup QueueManagement + */ +#define xQueueReceive( xQueue, pvBuffer, xTicksToWait ) xQueueGenericReceive( ( xQueue ), ( pvBuffer ), ( xTicksToWait ), pdFALSE ) + + +/** + * queue. h + * 
+ BaseType_t xQueueGenericReceive(
+									   QueueHandle_t	xQueue,
+									   void	*pvBuffer,
+									   TickType_t	xTicksToWait
+									   BaseType_t	xJustPeek
+									);
+ * + * It is preferred that the macro xQueueReceive() be used rather than calling + * this function directly. + * + * Receive an item from a queue. The item is received by copy so a buffer of + * adequate size must be provided. The number of bytes copied into the buffer + * was defined when the queue was created. + * + * This function must not be used in an interrupt service routine. See + * xQueueReceiveFromISR for an alternative that can. + * + * @param xQueue The handle to the queue from which the item is to be + * received. + * + * @param pvBuffer Pointer to the buffer into which the received item will + * be copied. + * + * @param xTicksToWait The maximum amount of time the task should block + * waiting for an item to receive should the queue be empty at the time + * of the call. The time is defined in tick periods so the constant + * portTICK_PERIOD_MS should be used to convert to real time if this is required. + * xQueueGenericReceive() will return immediately if the queue is empty and + * xTicksToWait is 0. + * + * @param xJustPeek When set to true, the item received from the queue is not + * actually removed from the queue - meaning a subsequent call to + * xQueueReceive() will return the same item. When set to false, the item + * being received from the queue is also removed from the queue. + * + * @return pdTRUE if an item was successfully received from the queue, + * otherwise pdFALSE. + * + * Example usage: + 
+ struct AMessage
+ {
+	char ucMessageID;
+	char ucData[ 20 ];
+ } xMessage;
+
+ QueueHandle_t xQueue;
+
+ // Task to create a queue and post a value.
+ void vATask( void *pvParameters )
+ {
+ struct AMessage *pxMessage;
+
+	// Create a queue capable of containing 10 pointers to AMessage structures.
+	// These should be passed by pointer as they contain a lot of data.
+	xQueue = xQueueCreate( 10, sizeof( struct AMessage * ) );
+	if( xQueue == 0 )
+	{
+		// Failed to create the queue.
+	}
+
+	// ...
+
+	// Send a pointer to a struct AMessage object.  Don't block if the
+	// queue is already full.
+	pxMessage = & xMessage;
+	xQueueSend( xQueue, ( void * ) &pxMessage, ( TickType_t ) 0 );
+
+	// ... Rest of task code.
+ }
+
+ // Task to receive from the queue.
+ void vADifferentTask( void *pvParameters )
+ {
+ struct AMessage *pxRxedMessage;
+
+	if( xQueue != 0 )
+	{
+		// Receive a message on the created queue.  Block for 10 ticks if a
+		// message is not immediately available.
+		if( xQueueGenericReceive( xQueue, &( pxRxedMessage ), ( TickType_t ) 10 ) )
+		{
+			// pcRxedMessage now points to the struct AMessage variable posted
+			// by vATask.
+		}
+	}
+
+	// ... Rest of task code.
+ }
+
+ * \defgroup xQueueReceive xQueueReceive + * \ingroup QueueManagement + */ +BaseType_t xQueueGenericReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait, const BaseType_t xJustPeek ) PRIVILEGED_FUNCTION; + +/** + * queue. h + * 
UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQueue );
+ * + * Return the number of messages stored in a queue. + * + * @param xQueue A handle to the queue being queried. + * + * @return The number of messages available in the queue. + * + * \defgroup uxQueueMessagesWaiting uxQueueMessagesWaiting + * \ingroup QueueManagement + */ +UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; + +/** + * queue. h + * 
UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQueue );
+ * + * Return the number of free spaces available in a queue. This is equal to the + * number of items that can be sent to the queue before the queue becomes full + * if no items are removed. + * + * @param xQueue A handle to the queue being queried. + * + * @return The number of spaces available in the queue. + * + * \defgroup uxQueueMessagesWaiting uxQueueMessagesWaiting + * \ingroup QueueManagement + */ +UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; + +/** + * queue. h + * 
void vQueueDelete( QueueHandle_t xQueue );
+ * + * Delete a queue - freeing all the memory allocated for storing of items + * placed on the queue. + * + * @param xQueue A handle to the queue to be deleted. + * + * \defgroup vQueueDelete vQueueDelete + * \ingroup QueueManagement + */ +void vQueueDelete( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; + +/** + * queue. h + * 
+ BaseType_t xQueueSendToFrontFromISR(
+										 QueueHandle_t xQueue,
+										 const void *pvItemToQueue,
+										 BaseType_t *pxHigherPriorityTaskWoken
+									  );
+
+ * + * This is a macro that calls xQueueGenericSendFromISR(). + * + * Post an item to the front of a queue. It is safe to use this macro from + * within an interrupt service routine. + * + * Items are queued by copy not reference so it is preferable to only + * queue small items, especially when called from an ISR. In most cases + * it would be preferable to store a pointer to the item being queued. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @param pxHigherPriorityTaskWoken xQueueSendToFrontFromISR() will set + * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task + * to unblock, and the unblocked task has a priority higher than the currently + * running task. If xQueueSendToFromFromISR() sets this value to pdTRUE then + * a context switch should be requested before the interrupt is exited. + * + * @return pdTRUE if the data was successfully sent to the queue, otherwise + * errQUEUE_FULL. + * + * Example usage for buffered IO (where the ISR can obtain more than one value + * per call): + 
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPrioritTaskWoken;
+
+	// We have not woken a task at the start of the ISR.
+	xHigherPriorityTaskWoken = pdFALSE;
+
+	// Loop until the buffer is empty.
+	do
+	{
+		// Obtain a byte from the buffer.
+		cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+		// Post the byte.
+		xQueueSendToFrontFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+	} while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+	// Now the buffer is empty we can switch context if necessary.
+	if( xHigherPriorityTaskWoken )
+	{
+		taskYIELD ();
+	}
+ }
+
+ * + * \defgroup xQueueSendFromISR xQueueSendFromISR + * \ingroup QueueManagement + */ +#define xQueueSendToFrontFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_FRONT ) + + +/** + * queue. h + * 
+ BaseType_t xQueueSendToBackFromISR(
+										 QueueHandle_t xQueue,
+										 const void *pvItemToQueue,
+										 BaseType_t *pxHigherPriorityTaskWoken
+									  );
+
+ * + * This is a macro that calls xQueueGenericSendFromISR(). + * + * Post an item to the back of a queue. It is safe to use this macro from + * within an interrupt service routine. + * + * Items are queued by copy not reference so it is preferable to only + * queue small items, especially when called from an ISR. In most cases + * it would be preferable to store a pointer to the item being queued. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @param pxHigherPriorityTaskWoken xQueueSendToBackFromISR() will set + * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task + * to unblock, and the unblocked task has a priority higher than the currently + * running task. If xQueueSendToBackFromISR() sets this value to pdTRUE then + * a context switch should be requested before the interrupt is exited. + * + * @return pdTRUE if the data was successfully sent to the queue, otherwise + * errQUEUE_FULL. + * + * Example usage for buffered IO (where the ISR can obtain more than one value + * per call): + 
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPriorityTaskWoken;
+
+	// We have not woken a task at the start of the ISR.
+	xHigherPriorityTaskWoken = pdFALSE;
+
+	// Loop until the buffer is empty.
+	do
+	{
+		// Obtain a byte from the buffer.
+		cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+		// Post the byte.
+		xQueueSendToBackFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+	} while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+	// Now the buffer is empty we can switch context if necessary.
+	if( xHigherPriorityTaskWoken )
+	{
+		taskYIELD ();
+	}
+ }
+
+ * + * \defgroup xQueueSendFromISR xQueueSendFromISR + * \ingroup QueueManagement + */ +#define xQueueSendToBackFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK ) + +/** + * queue. h + * 
+ BaseType_t xQueueOverwriteFromISR(
+							  QueueHandle_t xQueue,
+							  const void * pvItemToQueue,
+							  BaseType_t *pxHigherPriorityTaskWoken
+						 );
+ *
+ * + * A version of xQueueOverwrite() that can be used in an interrupt service + * routine (ISR). + * + * Only for use with queues that can hold a single item - so the queue is either + * empty or full. + * + * Post an item on a queue. If the queue is already full then overwrite the + * value held in the queue. The item is queued by copy, not by reference. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @param pxHigherPriorityTaskWoken xQueueOverwriteFromISR() will set + * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task + * to unblock, and the unblocked task has a priority higher than the currently + * running task. If xQueueOverwriteFromISR() sets this value to pdTRUE then + * a context switch should be requested before the interrupt is exited. + * + * @return xQueueOverwriteFromISR() is a macro that calls + * xQueueGenericSendFromISR(), and therefore has the same return values as + * xQueueSendToFrontFromISR(). However, pdPASS is the only value that can be + * returned because xQueueOverwriteFromISR() will write to the queue even when + * the queue is already full. + * + * Example usage: + 
+
+ QueueHandle_t xQueue;
+
+ void vFunction( void *pvParameters )
+ {
+ 	// Create a queue to hold one uint32_t value.  It is strongly
+	// recommended *not* to use xQueueOverwriteFromISR() on queues that can
+	// contain more than one value, and doing so will trigger an assertion
+	// if configASSERT() is defined.
+	xQueue = xQueueCreate( 1, sizeof( uint32_t ) );
+}
+
+void vAnInterruptHandler( void )
+{
+// xHigherPriorityTaskWoken must be set to pdFALSE before it is used.
+BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+uint32_t ulVarToSend, ulValReceived;
+
+	// Write the value 10 to the queue using xQueueOverwriteFromISR().
+	ulVarToSend = 10;
+	xQueueOverwriteFromISR( xQueue, &ulVarToSend, &xHigherPriorityTaskWoken );
+
+	// The queue is full, but calling xQueueOverwriteFromISR() again will still
+	// pass because the value held in the queue will be overwritten with the
+	// new value.
+	ulVarToSend = 100;
+	xQueueOverwriteFromISR( xQueue, &ulVarToSend, &xHigherPriorityTaskWoken );
+
+	// Reading from the queue will now return 100.
+
+	// ...
+
+	if( xHigherPrioritytaskWoken == pdTRUE )
+	{
+		// Writing to the queue caused a task to unblock and the unblocked task
+		// has a priority higher than or equal to the priority of the currently
+		// executing task (the task this interrupt interrupted).  Perform a context
+		// switch so this interrupt returns directly to the unblocked task.
+		portYIELD_FROM_ISR(); // or portEND_SWITCHING_ISR() depending on the port.
+	}
+}
+
+ * \defgroup xQueueOverwriteFromISR xQueueOverwriteFromISR + * \ingroup QueueManagement + */ +#define xQueueOverwriteFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueOVERWRITE ) + +/** + * queue. h + * 
+ BaseType_t xQueueSendFromISR(
+									 QueueHandle_t xQueue,
+									 const void *pvItemToQueue,
+									 BaseType_t *pxHigherPriorityTaskWoken
+								);
+
+ * + * This is a macro that calls xQueueGenericSendFromISR(). It is included + * for backward compatibility with versions of FreeRTOS.org that did not + * include the xQueueSendToBackFromISR() and xQueueSendToFrontFromISR() + * macros. + * + * Post an item to the back of a queue. It is safe to use this function from + * within an interrupt service routine. + * + * Items are queued by copy not reference so it is preferable to only + * queue small items, especially when called from an ISR. In most cases + * it would be preferable to store a pointer to the item being queued. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @param pxHigherPriorityTaskWoken xQueueSendFromISR() will set + * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task + * to unblock, and the unblocked task has a priority higher than the currently + * running task. If xQueueSendFromISR() sets this value to pdTRUE then + * a context switch should be requested before the interrupt is exited. + * + * @return pdTRUE if the data was successfully sent to the queue, otherwise + * errQUEUE_FULL. + * + * Example usage for buffered IO (where the ISR can obtain more than one value + * per call): + 
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPriorityTaskWoken;
+
+	// We have not woken a task at the start of the ISR.
+	xHigherPriorityTaskWoken = pdFALSE;
+
+	// Loop until the buffer is empty.
+	do
+	{
+		// Obtain a byte from the buffer.
+		cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+		// Post the byte.
+		xQueueSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWoken );
+
+	} while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+	// Now the buffer is empty we can switch context if necessary.
+	if( xHigherPriorityTaskWoken )
+	{
+		// Actual macro used here is port specific.
+		portYIELD_FROM_ISR ();
+	}
+ }
+
+ * + * \defgroup xQueueSendFromISR xQueueSendFromISR + * \ingroup QueueManagement + */ +#define xQueueSendFromISR( xQueue, pvItemToQueue, pxHigherPriorityTaskWoken ) xQueueGenericSendFromISR( ( xQueue ), ( pvItemToQueue ), ( pxHigherPriorityTaskWoken ), queueSEND_TO_BACK ) + +/** + * queue. h + * 
+ BaseType_t xQueueGenericSendFromISR(
+										   QueueHandle_t		xQueue,
+										   const	void	*pvItemToQueue,
+										   BaseType_t	*pxHigherPriorityTaskWoken,
+										   BaseType_t	xCopyPosition
+									   );
+
+ * + * It is preferred that the macros xQueueSendFromISR(), + * xQueueSendToFrontFromISR() and xQueueSendToBackFromISR() be used in place + * of calling this function directly. xQueueGiveFromISR() is an + * equivalent for use by semaphores that don't actually copy any data. + * + * Post an item on a queue. It is safe to use this function from within an + * interrupt service routine. + * + * Items are queued by copy not reference so it is preferable to only + * queue small items, especially when called from an ISR. In most cases + * it would be preferable to store a pointer to the item being queued. + * + * @param xQueue The handle to the queue on which the item is to be posted. + * + * @param pvItemToQueue A pointer to the item that is to be placed on the + * queue. The size of the items the queue will hold was defined when the + * queue was created, so this many bytes will be copied from pvItemToQueue + * into the queue storage area. + * + * @param pxHigherPriorityTaskWoken xQueueGenericSendFromISR() will set + * *pxHigherPriorityTaskWoken to pdTRUE if sending to the queue caused a task + * to unblock, and the unblocked task has a priority higher than the currently + * running task. If xQueueGenericSendFromISR() sets this value to pdTRUE then + * a context switch should be requested before the interrupt is exited. + * + * @param xCopyPosition Can take the value queueSEND_TO_BACK to place the + * item at the back of the queue, or queueSEND_TO_FRONT to place the item + * at the front of the queue (for high priority messages). + * + * @return pdTRUE if the data was successfully sent to the queue, otherwise + * errQUEUE_FULL. + * + * Example usage for buffered IO (where the ISR can obtain more than one value + * per call): + 
+ void vBufferISR( void )
+ {
+ char cIn;
+ BaseType_t xHigherPriorityTaskWokenByPost;
+
+	// We have not woken a task at the start of the ISR.
+	xHigherPriorityTaskWokenByPost = pdFALSE;
+
+	// Loop until the buffer is empty.
+	do
+	{
+		// Obtain a byte from the buffer.
+		cIn = portINPUT_BYTE( RX_REGISTER_ADDRESS );
+
+		// Post each byte.
+		xQueueGenericSendFromISR( xRxQueue, &cIn, &xHigherPriorityTaskWokenByPost, queueSEND_TO_BACK );
+
+	} while( portINPUT_BYTE( BUFFER_COUNT ) );
+
+	// Now the buffer is empty we can switch context if necessary.  Note that the
+	// name of the yield function required is port specific.
+	if( xHigherPriorityTaskWokenByPost )
+	{
+		taskYIELD_YIELD_FROM_ISR();
+	}
+ }
+
+ * + * \defgroup xQueueSendFromISR xQueueSendFromISR + * \ingroup QueueManagement + */ +BaseType_t xQueueGenericSendFromISR( QueueHandle_t xQueue, const void * const pvItemToQueue, BaseType_t * const pxHigherPriorityTaskWoken, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION; +BaseType_t xQueueGiveFromISR( QueueHandle_t xQueue, BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION; + +/** + * queue. h + * 
+ BaseType_t xQueueReceiveFromISR(
+									   QueueHandle_t	xQueue,
+									   void	*pvBuffer,
+									   BaseType_t *pxTaskWoken
+								   );
+ *
+ * + * Receive an item from a queue. It is safe to use this function from within an + * interrupt service routine. + * + * @param xQueue The handle to the queue from which the item is to be + * received. + * + * @param pvBuffer Pointer to the buffer into which the received item will + * be copied. + * + * @param pxTaskWoken A task may be blocked waiting for space to become + * available on the queue. If xQueueReceiveFromISR causes such a task to + * unblock *pxTaskWoken will get set to pdTRUE, otherwise *pxTaskWoken will + * remain unchanged. + * + * @return pdTRUE if an item was successfully received from the queue, + * otherwise pdFALSE. + * + * Example usage: + 
+
+ QueueHandle_t xQueue;
+
+ // Function to create a queue and post some values.
+ void vAFunction( void *pvParameters )
+ {
+ char cValueToPost;
+ const TickType_t xTicksToWait = ( TickType_t )0xff;
+
+	// Create a queue capable of containing 10 characters.
+	xQueue = xQueueCreate( 10, sizeof( char ) );
+	if( xQueue == 0 )
+	{
+		// Failed to create the queue.
+	}
+
+	// ...
+
+	// Post some characters that will be used within an ISR.  If the queue
+	// is full then this task will block for xTicksToWait ticks.
+	cValueToPost = 'a';
+	xQueueSend( xQueue, ( void * ) &cValueToPost, xTicksToWait );
+	cValueToPost = 'b';
+	xQueueSend( xQueue, ( void * ) &cValueToPost, xTicksToWait );
+
+	// ... keep posting characters ... this task may block when the queue
+	// becomes full.
+
+	cValueToPost = 'c';
+	xQueueSend( xQueue, ( void * ) &cValueToPost, xTicksToWait );
+ }
+
+ // ISR that outputs all the characters received on the queue.
+ void vISR_Routine( void )
+ {
+ BaseType_t xTaskWokenByReceive = pdFALSE;
+ char cRxedChar;
+
+	while( xQueueReceiveFromISR( xQueue, ( void * ) &cRxedChar, &xTaskWokenByReceive) )
+	{
+		// A character was received.  Output the character now.
+		vOutputCharacter( cRxedChar );
+
+		// If removing the character from the queue woke the task that was
+		// posting onto the queue cTaskWokenByReceive will have been set to
+		// pdTRUE.  No matter how many times this loop iterates only one
+		// task will be woken.
+	}
+
+	if( cTaskWokenByPost != ( char ) pdFALSE;
+	{
+		taskYIELD ();
+	}
+ }
+
+ * \defgroup xQueueReceiveFromISR xQueueReceiveFromISR + * \ingroup QueueManagement + */ +BaseType_t xQueueReceiveFromISR( QueueHandle_t xQueue, void * const pvBuffer, BaseType_t * const pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION; + +/* + * Utilities to query queues that are safe to use from an ISR. These utilities + * should be used only from witin an ISR, or within a critical section. + */ +BaseType_t xQueueIsQueueEmptyFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; +BaseType_t xQueueIsQueueFullFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; +UBaseType_t uxQueueMessagesWaitingFromISR( const QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; + +/* + * The functions defined above are for passing data to and from tasks. The + * functions below are the equivalents for passing data to and from + * co-routines. + * + * These functions are called from the co-routine macro implementation and + * should not be called directly from application code. Instead use the macro + * wrappers defined within croutine.h. + */ +BaseType_t xQueueCRSendFromISR( QueueHandle_t xQueue, const void *pvItemToQueue, BaseType_t xCoRoutinePreviouslyWoken ); +BaseType_t xQueueCRReceiveFromISR( QueueHandle_t xQueue, void *pvBuffer, BaseType_t *pxTaskWoken ); +BaseType_t xQueueCRSend( QueueHandle_t xQueue, const void *pvItemToQueue, TickType_t xTicksToWait ); +BaseType_t xQueueCRReceive( QueueHandle_t xQueue, void *pvBuffer, TickType_t xTicksToWait ); + +/* + * For internal use only. Use xSemaphoreCreateMutex(), + * xSemaphoreCreateCounting() or xSemaphoreGetMutexHolder() instead of calling + * these functions directly. + */ +QueueHandle_t xQueueCreateMutex( const uint8_t ucQueueType ) PRIVILEGED_FUNCTION; +QueueHandle_t xQueueCreateMutexStatic( const uint8_t ucQueueType, StaticQueue_t *pxStaticQueue ) PRIVILEGED_FUNCTION; +QueueHandle_t xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount ) PRIVILEGED_FUNCTION; +QueueHandle_t xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount, StaticQueue_t *pxStaticQueue ) PRIVILEGED_FUNCTION; +void* xQueueGetMutexHolder( QueueHandle_t xSemaphore ) PRIVILEGED_FUNCTION; + +/* + * For internal use only. Use xSemaphoreTakeMutexRecursive() or + * xSemaphoreGiveMutexRecursive() instead of calling these functions directly. + */ +BaseType_t xQueueTakeMutexRecursive( QueueHandle_t xMutex, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION; +BaseType_t xQueueGiveMutexRecursive( QueueHandle_t pxMutex ) PRIVILEGED_FUNCTION; + +/* + * Reset a queue back to its original empty state. The return value is now + * obsolete and is always set to pdPASS. + */ +#define xQueueReset( xQueue ) xQueueGenericReset( xQueue, pdFALSE ) + +/* + * The registry is provided as a means for kernel aware debuggers to + * locate queues, semaphores and mutexes. Call vQueueAddToRegistry() add + * a queue, semaphore or mutex handle to the registry if you want the handle + * to be available to a kernel aware debugger. If you are not using a kernel + * aware debugger then this function can be ignored. + * + * configQUEUE_REGISTRY_SIZE defines the maximum number of handles the + * registry can hold. configQUEUE_REGISTRY_SIZE must be greater than 0 + * within FreeRTOSConfig.h for the registry to be available. Its value + * does not effect the number of queues, semaphores and mutexes that can be + * created - just the number that the registry can hold. + * + * @param xQueue The handle of the queue being added to the registry. This + * is the handle returned by a call to xQueueCreate(). Semaphore and mutex + * handles can also be passed in here. + * + * @param pcName The name to be associated with the handle. This is the + * name that the kernel aware debugger will display. The queue registry only + * stores a pointer to the string - so the string must be persistent (global or + * preferably in ROM/Flash), not on the stack. + */ +#if( configQUEUE_REGISTRY_SIZE > 0 ) + void vQueueAddToRegistry( QueueHandle_t xQueue, const char *pcName ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */ +#endif + +/* + * The registry is provided as a means for kernel aware debuggers to + * locate queues, semaphores and mutexes. Call vQueueAddToRegistry() add + * a queue, semaphore or mutex handle to the registry if you want the handle + * to be available to a kernel aware debugger, and vQueueUnregisterQueue() to + * remove the queue, semaphore or mutex from the register. If you are not using + * a kernel aware debugger then this function can be ignored. + * + * @param xQueue The handle of the queue being removed from the registry. + */ +#if( configQUEUE_REGISTRY_SIZE > 0 ) + void vQueueUnregisterQueue( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; +#endif + +/* + * The queue registry is provided as a means for kernel aware debuggers to + * locate queues, semaphores and mutexes. Call pcQueueGetName() to look + * up and return the name of a queue in the queue registry from the queue's + * handle. + * + * @param xQueue The handle of the queue the name of which will be returned. + * @return If the queue is in the registry then a pointer to the name of the + * queue is returned. If the queue is not in the registry then NULL is + * returned. + */ +#if( configQUEUE_REGISTRY_SIZE > 0 ) + const char *pcQueueGetName( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */ +#endif + +/* + * Generic version of the function used to creaet a queue using dynamic memory + * allocation. This is called by other functions and macros that create other + * RTOS objects that use the queue structure as their base. + */ +#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + QueueHandle_t xQueueGenericCreate( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, const uint8_t ucQueueType ) PRIVILEGED_FUNCTION; +#endif + +/* + * Generic version of the function used to creaet a queue using dynamic memory + * allocation. This is called by other functions and macros that create other + * RTOS objects that use the queue structure as their base. + */ +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + QueueHandle_t xQueueGenericCreateStatic( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, StaticQueue_t *pxStaticQueue, const uint8_t ucQueueType ) PRIVILEGED_FUNCTION; +#endif + +/* + * Queue sets provide a mechanism to allow a task to block (pend) on a read + * operation from multiple queues or semaphores simultaneously. + * + * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this + * function. + * + * A queue set must be explicitly created using a call to xQueueCreateSet() + * before it can be used. Once created, standard FreeRTOS queues and semaphores + * can be added to the set using calls to xQueueAddToSet(). + * xQueueSelectFromSet() is then used to determine which, if any, of the queues + * or semaphores contained in the set is in a state where a queue read or + * semaphore take operation would be successful. + * + * Note 1: See the documentation on http://wwwFreeRTOS.org/RTOS-queue-sets.html + * for reasons why queue sets are very rarely needed in practice as there are + * simpler methods of blocking on multiple objects. + * + * Note 2: Blocking on a queue set that contains a mutex will not cause the + * mutex holder to inherit the priority of the blocked task. + * + * Note 3: An additional 4 bytes of RAM is required for each space in a every + * queue added to a queue set. Therefore counting semaphores that have a high + * maximum count value should not be added to a queue set. + * + * Note 4: A receive (in the case of a queue) or take (in the case of a + * semaphore) operation must not be performed on a member of a queue set unless + * a call to xQueueSelectFromSet() has first returned a handle to that set member. + * + * @param uxEventQueueLength Queue sets store events that occur on + * the queues and semaphores contained in the set. uxEventQueueLength specifies + * the maximum number of events that can be queued at once. To be absolutely + * certain that events are not lost uxEventQueueLength should be set to the + * total sum of the length of the queues added to the set, where binary + * semaphores and mutexes have a length of 1, and counting semaphores have a + * length set by their maximum count value. Examples: + * + If a queue set is to hold a queue of length 5, another queue of length 12, + * and a binary semaphore, then uxEventQueueLength should be set to + * (5 + 12 + 1), or 18. + * + If a queue set is to hold three binary semaphores then uxEventQueueLength + * should be set to (1 + 1 + 1 ), or 3. + * + If a queue set is to hold a counting semaphore that has a maximum count of + * 5, and a counting semaphore that has a maximum count of 3, then + * uxEventQueueLength should be set to (5 + 3), or 8. + * + * @return If the queue set is created successfully then a handle to the created + * queue set is returned. Otherwise NULL is returned. + */ +QueueSetHandle_t xQueueCreateSet( const UBaseType_t uxEventQueueLength ) PRIVILEGED_FUNCTION; + +/* + * Adds a queue or semaphore to a queue set that was previously created by a + * call to xQueueCreateSet(). + * + * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this + * function. + * + * Note 1: A receive (in the case of a queue) or take (in the case of a + * semaphore) operation must not be performed on a member of a queue set unless + * a call to xQueueSelectFromSet() has first returned a handle to that set member. + * + * @param xQueueOrSemaphore The handle of the queue or semaphore being added to + * the queue set (cast to an QueueSetMemberHandle_t type). + * + * @param xQueueSet The handle of the queue set to which the queue or semaphore + * is being added. + * + * @return If the queue or semaphore was successfully added to the queue set + * then pdPASS is returned. If the queue could not be successfully added to the + * queue set because it is already a member of a different queue set then pdFAIL + * is returned. + */ +BaseType_t xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION; + +/* + * Removes a queue or semaphore from a queue set. A queue or semaphore can only + * be removed from a set if the queue or semaphore is empty. + * + * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this + * function. + * + * @param xQueueOrSemaphore The handle of the queue or semaphore being removed + * from the queue set (cast to an QueueSetMemberHandle_t type). + * + * @param xQueueSet The handle of the queue set in which the queue or semaphore + * is included. + * + * @return If the queue or semaphore was successfully removed from the queue set + * then pdPASS is returned. If the queue was not in the queue set, or the + * queue (or semaphore) was not empty, then pdFAIL is returned. + */ +BaseType_t xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION; + +/* + * xQueueSelectFromSet() selects from the members of a queue set a queue or + * semaphore that either contains data (in the case of a queue) or is available + * to take (in the case of a semaphore). xQueueSelectFromSet() effectively + * allows a task to block (pend) on a read operation on all the queues and + * semaphores in a queue set simultaneously. + * + * See FreeRTOS/Source/Demo/Common/Minimal/QueueSet.c for an example using this + * function. + * + * Note 1: See the documentation on http://wwwFreeRTOS.org/RTOS-queue-sets.html + * for reasons why queue sets are very rarely needed in practice as there are + * simpler methods of blocking on multiple objects. + * + * Note 2: Blocking on a queue set that contains a mutex will not cause the + * mutex holder to inherit the priority of the blocked task. + * + * Note 3: A receive (in the case of a queue) or take (in the case of a + * semaphore) operation must not be performed on a member of a queue set unless + * a call to xQueueSelectFromSet() has first returned a handle to that set member. + * + * @param xQueueSet The queue set on which the task will (potentially) block. + * + * @param xTicksToWait The maximum time, in ticks, that the calling task will + * remain in the Blocked state (with other tasks executing) to wait for a member + * of the queue set to be ready for a successful queue read or semaphore take + * operation. + * + * @return xQueueSelectFromSet() will return the handle of a queue (cast to + * a QueueSetMemberHandle_t type) contained in the queue set that contains data, + * or the handle of a semaphore (cast to a QueueSetMemberHandle_t type) contained + * in the queue set that is available, or NULL if no such queue or semaphore + * exists before before the specified block time expires. + */ +QueueSetMemberHandle_t xQueueSelectFromSet( QueueSetHandle_t xQueueSet, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION; + +/* + * A version of xQueueSelectFromSet() that can be used from an ISR. + */ +QueueSetMemberHandle_t xQueueSelectFromSetFromISR( QueueSetHandle_t xQueueSet ) PRIVILEGED_FUNCTION; + +/* Not public API functions. */ +void vQueueWaitForMessageRestricted( QueueHandle_t xQueue, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely ) PRIVILEGED_FUNCTION; +BaseType_t xQueueGenericReset( QueueHandle_t xQueue, BaseType_t xNewQueue ) PRIVILEGED_FUNCTION; +void vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber ) PRIVILEGED_FUNCTION; +UBaseType_t uxQueueGetQueueNumber( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; +uint8_t ucQueueGetQueueType( QueueHandle_t xQueue ) PRIVILEGED_FUNCTION; + + +#ifdef __cplusplus +} +#endif + +#endif /* QUEUE_H */ + diff --git a/Program/XLLC/FreeRTOS/include/semphr.h b/Program/XLLC/FreeRTOS/include/semphr.h new file mode 100644 index 0000000000000000000000000000000000000000..f9867ae4940762be297865a9a5b9fbf0ca050838 --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/semphr.h @@ -0,0 +1,1171 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + +#ifndef SEMAPHORE_H +#define SEMAPHORE_H + +#ifndef INC_FREERTOS_H + #error "include FreeRTOS.h" must appear in source files before "include semphr.h" +#endif + +#include "queue.h" + +typedef QueueHandle_t SemaphoreHandle_t; + +#define semBINARY_SEMAPHORE_QUEUE_LENGTH ( ( uint8_t ) 1U ) +#define semSEMAPHORE_QUEUE_ITEM_LENGTH ( ( uint8_t ) 0U ) +#define semGIVE_BLOCK_TIME ( ( TickType_t ) 0U ) + + +/** + * semphr. h + * 
vSemaphoreCreateBinary( SemaphoreHandle_t xSemaphore )
+ * + * In many usage scenarios it is faster and more memory efficient to use a + * direct to task notification in place of a binary semaphore! + * http://www.freertos.org/RTOS-task-notifications.html + * + * This old vSemaphoreCreateBinary() macro is now deprecated in favour of the + * xSemaphoreCreateBinary() function. Note that binary semaphores created using + * the vSemaphoreCreateBinary() macro are created in a state such that the + * first call to 'take' the semaphore would pass, whereas binary semaphores + * created using xSemaphoreCreateBinary() are created in a state such that the + * the semaphore must first be 'given' before it can be 'taken'. + * + * Macro that implements a semaphore by using the existing queue mechanism. + * The queue length is 1 as this is a binary semaphore. The data size is 0 + * as we don't want to actually store any data - we just want to know if the + * queue is empty or full. + * + * This type of semaphore can be used for pure synchronisation between tasks or + * between an interrupt and a task. The semaphore need not be given back once + * obtained, so one task/interrupt can continuously 'give' the semaphore while + * another continuously 'takes' the semaphore. For this reason this type of + * semaphore does not use a priority inheritance mechanism. For an alternative + * that does use priority inheritance see xSemaphoreCreateMutex(). + * + * @param xSemaphore Handle to the created semaphore. Should be of type SemaphoreHandle_t. + * + * Example usage: + 
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ void vATask( void * pvParameters )
+ {
+    // Semaphore cannot be used before a call to vSemaphoreCreateBinary ().
+    // This is a macro so pass the variable in directly.
+    vSemaphoreCreateBinary( xSemaphore );
+
+    if( xSemaphore != NULL )
+    {
+        // The semaphore was created successfully.
+        // The semaphore can now be used.
+    }
+ }
+
+ * \defgroup vSemaphoreCreateBinary vSemaphoreCreateBinary + * \ingroup Semaphores + */ +#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + #define vSemaphoreCreateBinary( xSemaphore ) \ + { \ + ( xSemaphore ) = xQueueGenericCreate( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_BINARY_SEMAPHORE ); \ + if( ( xSemaphore ) != NULL ) \ + { \ + ( void ) xSemaphoreGive( ( xSemaphore ) ); \ + } \ + } +#endif + +/** + * semphr. h + * 
SemaphoreHandle_t xSemaphoreCreateBinary( void )
+ * + * Creates a new binary semaphore instance, and returns a handle by which the + * new semaphore can be referenced. + * + * In many usage scenarios it is faster and more memory efficient to use a + * direct to task notification in place of a binary semaphore! + * http://www.freertos.org/RTOS-task-notifications.html + * + * Internally, within the FreeRTOS implementation, binary semaphores use a block + * of memory, in which the semaphore structure is stored. If a binary semaphore + * is created using xSemaphoreCreateBinary() then the required memory is + * automatically dynamically allocated inside the xSemaphoreCreateBinary() + * function. (see http://www.freertos.org/a00111.html). If a binary semaphore + * is created using xSemaphoreCreateBinaryStatic() then the application writer + * must provide the memory. xSemaphoreCreateBinaryStatic() therefore allows a + * binary semaphore to be created without using any dynamic memory allocation. + * + * The old vSemaphoreCreateBinary() macro is now deprecated in favour of this + * xSemaphoreCreateBinary() function. Note that binary semaphores created using + * the vSemaphoreCreateBinary() macro are created in a state such that the + * first call to 'take' the semaphore would pass, whereas binary semaphores + * created using xSemaphoreCreateBinary() are created in a state such that the + * the semaphore must first be 'given' before it can be 'taken'. + * + * This type of semaphore can be used for pure synchronisation between tasks or + * between an interrupt and a task. The semaphore need not be given back once + * obtained, so one task/interrupt can continuously 'give' the semaphore while + * another continuously 'takes' the semaphore. For this reason this type of + * semaphore does not use a priority inheritance mechanism. For an alternative + * that does use priority inheritance see xSemaphoreCreateMutex(). + * + * @return Handle to the created semaphore, or NULL if the memory required to + * hold the semaphore's data structures could not be allocated. + * + * Example usage: + 
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ void vATask( void * pvParameters )
+ {
+    // Semaphore cannot be used before a call to xSemaphoreCreateBinary().
+    // This is a macro so pass the variable in directly.
+    xSemaphore = xSemaphoreCreateBinary();
+
+    if( xSemaphore != NULL )
+    {
+        // The semaphore was created successfully.
+        // The semaphore can now be used.
+    }
+ }
+
+ * \defgroup xSemaphoreCreateBinary xSemaphoreCreateBinary + * \ingroup Semaphores + */ +#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + #define xSemaphoreCreateBinary() xQueueGenericCreate( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_BINARY_SEMAPHORE ) +#endif + +/** + * semphr. h + * 
SemaphoreHandle_t xSemaphoreCreateBinaryStatic( StaticSemaphore_t *pxSemaphoreBuffer )
+ * + * Creates a new binary semaphore instance, and returns a handle by which the + * new semaphore can be referenced. + * + * NOTE: In many usage scenarios it is faster and more memory efficient to use a + * direct to task notification in place of a binary semaphore! + * http://www.freertos.org/RTOS-task-notifications.html + * + * Internally, within the FreeRTOS implementation, binary semaphores use a block + * of memory, in which the semaphore structure is stored. If a binary semaphore + * is created using xSemaphoreCreateBinary() then the required memory is + * automatically dynamically allocated inside the xSemaphoreCreateBinary() + * function. (see http://www.freertos.org/a00111.html). If a binary semaphore + * is created using xSemaphoreCreateBinaryStatic() then the application writer + * must provide the memory. xSemaphoreCreateBinaryStatic() therefore allows a + * binary semaphore to be created without using any dynamic memory allocation. + * + * This type of semaphore can be used for pure synchronisation between tasks or + * between an interrupt and a task. The semaphore need not be given back once + * obtained, so one task/interrupt can continuously 'give' the semaphore while + * another continuously 'takes' the semaphore. For this reason this type of + * semaphore does not use a priority inheritance mechanism. For an alternative + * that does use priority inheritance see xSemaphoreCreateMutex(). + * + * @param pxSemaphoreBuffer Must point to a variable of type StaticSemaphore_t, + * which will then be used to hold the semaphore's data structure, removing the + * need for the memory to be allocated dynamically. + * + * @return If the semaphore is created then a handle to the created semaphore is + * returned. If pxSemaphoreBuffer is NULL then NULL is returned. + * + * Example usage: + 
+ SemaphoreHandle_t xSemaphore = NULL;
+ StaticSemaphore_t xSemaphoreBuffer;
+
+ void vATask( void * pvParameters )
+ {
+    // Semaphore cannot be used before a call to xSemaphoreCreateBinary().
+    // The semaphore's data structures will be placed in the xSemaphoreBuffer
+    // variable, the address of which is passed into the function.  The
+    // function's parameter is not NULL, so the function will not attempt any
+    // dynamic memory allocation, and therefore the function will not return
+    // return NULL.
+    xSemaphore = xSemaphoreCreateBinary( &xSemaphoreBuffer );
+
+    // Rest of task code goes here.
+ }
+
+ * \defgroup xSemaphoreCreateBinaryStatic xSemaphoreCreateBinaryStatic + * \ingroup Semaphores + */ +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + #define xSemaphoreCreateBinaryStatic( pxStaticSemaphore ) xQueueGenericCreateStatic( ( UBaseType_t ) 1, semSEMAPHORE_QUEUE_ITEM_LENGTH, NULL, pxStaticSemaphore, queueQUEUE_TYPE_BINARY_SEMAPHORE ) +#endif /* configSUPPORT_STATIC_ALLOCATION */ + +/** + * semphr. h + * 
xSemaphoreTake(
+ *                   SemaphoreHandle_t xSemaphore,
+ *                   TickType_t xBlockTime
+ *               )
+ * + * Macro to obtain a semaphore. The semaphore must have previously been + * created with a call to xSemaphoreCreateBinary(), xSemaphoreCreateMutex() or + * xSemaphoreCreateCounting(). + * + * @param xSemaphore A handle to the semaphore being taken - obtained when + * the semaphore was created. + * + * @param xBlockTime The time in ticks to wait for the semaphore to become + * available. The macro portTICK_PERIOD_MS can be used to convert this to a + * real time. A block time of zero can be used to poll the semaphore. A block + * time of portMAX_DELAY can be used to block indefinitely (provided + * INCLUDE_vTaskSuspend is set to 1 in FreeRTOSConfig.h). + * + * @return pdTRUE if the semaphore was obtained. pdFALSE + * if xBlockTime expired without the semaphore becoming available. + * + * Example usage: + 
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ // A task that creates a semaphore.
+ void vATask( void * pvParameters )
+ {
+    // Create the semaphore to guard a shared resource.
+    xSemaphore = xSemaphoreCreateBinary();
+ }
+
+ // A task that uses the semaphore.
+ void vAnotherTask( void * pvParameters )
+ {
+    // ... Do other things.
+
+    if( xSemaphore != NULL )
+    {
+        // See if we can obtain the semaphore.  If the semaphore is not available
+        // wait 10 ticks to see if it becomes free.
+        if( xSemaphoreTake( xSemaphore, ( TickType_t ) 10 ) == pdTRUE )
+        {
+            // We were able to obtain the semaphore and can now access the
+            // shared resource.
+
+            // ...
+
+            // We have finished accessing the shared resource.  Release the
+            // semaphore.
+            xSemaphoreGive( xSemaphore );
+        }
+        else
+        {
+            // We could not obtain the semaphore and can therefore not access
+            // the shared resource safely.
+        }
+    }
+ }
+
+ * \defgroup xSemaphoreTake xSemaphoreTake + * \ingroup Semaphores + */ +#define xSemaphoreTake( xSemaphore, xBlockTime ) xQueueGenericReceive( ( QueueHandle_t ) ( xSemaphore ), NULL, ( xBlockTime ), pdFALSE ) + +/** + * semphr. h + * xSemaphoreTakeRecursive( + * SemaphoreHandle_t xMutex, + * TickType_t xBlockTime + * ) + * + * Macro to recursively obtain, or 'take', a mutex type semaphore. + * The mutex must have previously been created using a call to + * xSemaphoreCreateRecursiveMutex(); + * + * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this + * macro to be available. + * + * This macro must not be used on mutexes created using xSemaphoreCreateMutex(). + * + * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex + * doesn't become available again until the owner has called + * xSemaphoreGiveRecursive() for each successful 'take' request. For example, + * if a task successfully 'takes' the same mutex 5 times then the mutex will + * not be available to any other task until it has also 'given' the mutex back + * exactly five times. + * + * @param xMutex A handle to the mutex being obtained. This is the + * handle returned by xSemaphoreCreateRecursiveMutex(); + * + * @param xBlockTime The time in ticks to wait for the semaphore to become + * available. The macro portTICK_PERIOD_MS can be used to convert this to a + * real time. A block time of zero can be used to poll the semaphore. If + * the task already owns the semaphore then xSemaphoreTakeRecursive() will + * return immediately no matter what the value of xBlockTime. + * + * @return pdTRUE if the semaphore was obtained. pdFALSE if xBlockTime + * expired without the semaphore becoming available. + * + * Example usage: + 
+ SemaphoreHandle_t xMutex = NULL;
+
+ // A task that creates a mutex.
+ void vATask( void * pvParameters )
+ {
+    // Create the mutex to guard a shared resource.
+    xMutex = xSemaphoreCreateRecursiveMutex();
+ }
+
+ // A task that uses the mutex.
+ void vAnotherTask( void * pvParameters )
+ {
+    // ... Do other things.
+
+    if( xMutex != NULL )
+    {
+        // See if we can obtain the mutex.  If the mutex is not available
+        // wait 10 ticks to see if it becomes free.
+        if( xSemaphoreTakeRecursive( xSemaphore, ( TickType_t ) 10 ) == pdTRUE )
+        {
+            // We were able to obtain the mutex and can now access the
+            // shared resource.
+
+            // ...
+            // For some reason due to the nature of the code further calls to
+			// xSemaphoreTakeRecursive() are made on the same mutex.  In real
+			// code these would not be just sequential calls as this would make
+			// no sense.  Instead the calls are likely to be buried inside
+			// a more complex call structure.
+            xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+            xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+
+            // The mutex has now been 'taken' three times, so will not be
+			// available to another task until it has also been given back
+			// three times.  Again it is unlikely that real code would have
+			// these calls sequentially, but instead buried in a more complex
+			// call structure.  This is just for illustrative purposes.
+            xSemaphoreGiveRecursive( xMutex );
+			xSemaphoreGiveRecursive( xMutex );
+			xSemaphoreGiveRecursive( xMutex );
+
+			// Now the mutex can be taken by other tasks.
+        }
+        else
+        {
+            // We could not obtain the mutex and can therefore not access
+            // the shared resource safely.
+        }
+    }
+ }
+
+ * \defgroup xSemaphoreTakeRecursive xSemaphoreTakeRecursive + * \ingroup Semaphores + */ +#if( configUSE_RECURSIVE_MUTEXES == 1 ) + #define xSemaphoreTakeRecursive( xMutex, xBlockTime ) xQueueTakeMutexRecursive( ( xMutex ), ( xBlockTime ) ) +#endif + +/** + * semphr. h + * 
xSemaphoreGive( SemaphoreHandle_t xSemaphore )
+ * + * Macro to release a semaphore. The semaphore must have previously been + * created with a call to xSemaphoreCreateBinary(), xSemaphoreCreateMutex() or + * xSemaphoreCreateCounting(). and obtained using sSemaphoreTake(). + * + * This macro must not be used from an ISR. See xSemaphoreGiveFromISR () for + * an alternative which can be used from an ISR. + * + * This macro must also not be used on semaphores created using + * xSemaphoreCreateRecursiveMutex(). + * + * @param xSemaphore A handle to the semaphore being released. This is the + * handle returned when the semaphore was created. + * + * @return pdTRUE if the semaphore was released. pdFALSE if an error occurred. + * Semaphores are implemented using queues. An error can occur if there is + * no space on the queue to post a message - indicating that the + * semaphore was not first obtained correctly. + * + * Example usage: + 
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ void vATask( void * pvParameters )
+ {
+    // Create the semaphore to guard a shared resource.
+    xSemaphore = vSemaphoreCreateBinary();
+
+    if( xSemaphore != NULL )
+    {
+        if( xSemaphoreGive( xSemaphore ) != pdTRUE )
+        {
+            // We would expect this call to fail because we cannot give
+            // a semaphore without first "taking" it!
+        }
+
+        // Obtain the semaphore - don't block if the semaphore is not
+        // immediately available.
+        if( xSemaphoreTake( xSemaphore, ( TickType_t ) 0 ) )
+        {
+            // We now have the semaphore and can access the shared resource.
+
+            // ...
+
+            // We have finished accessing the shared resource so can free the
+            // semaphore.
+            if( xSemaphoreGive( xSemaphore ) != pdTRUE )
+            {
+                // We would not expect this call to fail because we must have
+                // obtained the semaphore to get here.
+            }
+        }
+    }
+ }
+
+ * \defgroup xSemaphoreGive xSemaphoreGive + * \ingroup Semaphores + */ +#define xSemaphoreGive( xSemaphore ) xQueueGenericSend( ( QueueHandle_t ) ( xSemaphore ), NULL, semGIVE_BLOCK_TIME, queueSEND_TO_BACK ) + +/** + * semphr. h + * 
xSemaphoreGiveRecursive( SemaphoreHandle_t xMutex )
+ * + * Macro to recursively release, or 'give', a mutex type semaphore. + * The mutex must have previously been created using a call to + * xSemaphoreCreateRecursiveMutex(); + * + * configUSE_RECURSIVE_MUTEXES must be set to 1 in FreeRTOSConfig.h for this + * macro to be available. + * + * This macro must not be used on mutexes created using xSemaphoreCreateMutex(). + * + * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex + * doesn't become available again until the owner has called + * xSemaphoreGiveRecursive() for each successful 'take' request. For example, + * if a task successfully 'takes' the same mutex 5 times then the mutex will + * not be available to any other task until it has also 'given' the mutex back + * exactly five times. + * + * @param xMutex A handle to the mutex being released, or 'given'. This is the + * handle returned by xSemaphoreCreateMutex(); + * + * @return pdTRUE if the semaphore was given. + * + * Example usage: + 
+ SemaphoreHandle_t xMutex = NULL;
+
+ // A task that creates a mutex.
+ void vATask( void * pvParameters )
+ {
+    // Create the mutex to guard a shared resource.
+    xMutex = xSemaphoreCreateRecursiveMutex();
+ }
+
+ // A task that uses the mutex.
+ void vAnotherTask( void * pvParameters )
+ {
+    // ... Do other things.
+
+    if( xMutex != NULL )
+    {
+        // See if we can obtain the mutex.  If the mutex is not available
+        // wait 10 ticks to see if it becomes free.
+        if( xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 ) == pdTRUE )
+        {
+            // We were able to obtain the mutex and can now access the
+            // shared resource.
+
+            // ...
+            // For some reason due to the nature of the code further calls to
+			// xSemaphoreTakeRecursive() are made on the same mutex.  In real
+			// code these would not be just sequential calls as this would make
+			// no sense.  Instead the calls are likely to be buried inside
+			// a more complex call structure.
+            xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+            xSemaphoreTakeRecursive( xMutex, ( TickType_t ) 10 );
+
+            // The mutex has now been 'taken' three times, so will not be
+			// available to another task until it has also been given back
+			// three times.  Again it is unlikely that real code would have
+			// these calls sequentially, it would be more likely that the calls
+			// to xSemaphoreGiveRecursive() would be called as a call stack
+			// unwound.  This is just for demonstrative purposes.
+            xSemaphoreGiveRecursive( xMutex );
+			xSemaphoreGiveRecursive( xMutex );
+			xSemaphoreGiveRecursive( xMutex );
+
+			// Now the mutex can be taken by other tasks.
+        }
+        else
+        {
+            // We could not obtain the mutex and can therefore not access
+            // the shared resource safely.
+        }
+    }
+ }
+
+ * \defgroup xSemaphoreGiveRecursive xSemaphoreGiveRecursive + * \ingroup Semaphores + */ +#if( configUSE_RECURSIVE_MUTEXES == 1 ) + #define xSemaphoreGiveRecursive( xMutex ) xQueueGiveMutexRecursive( ( xMutex ) ) +#endif + +/** + * semphr. h + * 
+ xSemaphoreGiveFromISR(
+                          SemaphoreHandle_t xSemaphore,
+                          BaseType_t *pxHigherPriorityTaskWoken
+                      )
+ * + * Macro to release a semaphore. The semaphore must have previously been + * created with a call to xSemaphoreCreateBinary() or xSemaphoreCreateCounting(). + * + * Mutex type semaphores (those created using a call to xSemaphoreCreateMutex()) + * must not be used with this macro. + * + * This macro can be used from an ISR. + * + * @param xSemaphore A handle to the semaphore being released. This is the + * handle returned when the semaphore was created. + * + * @param pxHigherPriorityTaskWoken xSemaphoreGiveFromISR() will set + * *pxHigherPriorityTaskWoken to pdTRUE if giving the semaphore caused a task + * to unblock, and the unblocked task has a priority higher than the currently + * running task. If xSemaphoreGiveFromISR() sets this value to pdTRUE then + * a context switch should be requested before the interrupt is exited. + * + * @return pdTRUE if the semaphore was successfully given, otherwise errQUEUE_FULL. + * + * Example usage: + 
+ \#define LONG_TIME 0xffff
+ \#define TICKS_TO_WAIT	10
+ SemaphoreHandle_t xSemaphore = NULL;
+
+ // Repetitive task.
+ void vATask( void * pvParameters )
+ {
+    for( ;; )
+    {
+        // We want this task to run every 10 ticks of a timer.  The semaphore
+        // was created before this task was started.
+
+        // Block waiting for the semaphore to become available.
+        if( xSemaphoreTake( xSemaphore, LONG_TIME ) == pdTRUE )
+        {
+            // It is time to execute.
+
+            // ...
+
+            // We have finished our task.  Return to the top of the loop where
+            // we will block on the semaphore until it is time to execute
+            // again.  Note when using the semaphore for synchronisation with an
+			// ISR in this manner there is no need to 'give' the semaphore back.
+        }
+    }
+ }
+
+ // Timer ISR
+ void vTimerISR( void * pvParameters )
+ {
+ static uint8_t ucLocalTickCount = 0;
+ static BaseType_t xHigherPriorityTaskWoken;
+
+    // A timer tick has occurred.
+
+    // ... Do other time functions.
+
+    // Is it time for vATask () to run?
+	xHigherPriorityTaskWoken = pdFALSE;
+    ucLocalTickCount++;
+    if( ucLocalTickCount >= TICKS_TO_WAIT )
+    {
+        // Unblock the task by releasing the semaphore.
+        xSemaphoreGiveFromISR( xSemaphore, &xHigherPriorityTaskWoken );
+
+        // Reset the count so we release the semaphore again in 10 ticks time.
+        ucLocalTickCount = 0;
+    }
+
+    if( xHigherPriorityTaskWoken != pdFALSE )
+    {
+        // We can force a context switch here.  Context switching from an
+        // ISR uses port specific syntax.  Check the demo task for your port
+        // to find the syntax required.
+    }
+ }
+
+ * \defgroup xSemaphoreGiveFromISR xSemaphoreGiveFromISR + * \ingroup Semaphores + */ +#define xSemaphoreGiveFromISR( xSemaphore, pxHigherPriorityTaskWoken ) xQueueGiveFromISR( ( QueueHandle_t ) ( xSemaphore ), ( pxHigherPriorityTaskWoken ) ) + +/** + * semphr. h + * 
+ xSemaphoreTakeFromISR(
+                          SemaphoreHandle_t xSemaphore,
+                          BaseType_t *pxHigherPriorityTaskWoken
+                      )
+ * + * Macro to take a semaphore from an ISR. The semaphore must have + * previously been created with a call to xSemaphoreCreateBinary() or + * xSemaphoreCreateCounting(). + * + * Mutex type semaphores (those created using a call to xSemaphoreCreateMutex()) + * must not be used with this macro. + * + * This macro can be used from an ISR, however taking a semaphore from an ISR + * is not a common operation. It is likely to only be useful when taking a + * counting semaphore when an interrupt is obtaining an object from a resource + * pool (when the semaphore count indicates the number of resources available). + * + * @param xSemaphore A handle to the semaphore being taken. This is the + * handle returned when the semaphore was created. + * + * @param pxHigherPriorityTaskWoken xSemaphoreTakeFromISR() will set + * *pxHigherPriorityTaskWoken to pdTRUE if taking the semaphore caused a task + * to unblock, and the unblocked task has a priority higher than the currently + * running task. If xSemaphoreTakeFromISR() sets this value to pdTRUE then + * a context switch should be requested before the interrupt is exited. + * + * @return pdTRUE if the semaphore was successfully taken, otherwise + * pdFALSE + */ +#define xSemaphoreTakeFromISR( xSemaphore, pxHigherPriorityTaskWoken ) xQueueReceiveFromISR( ( QueueHandle_t ) ( xSemaphore ), NULL, ( pxHigherPriorityTaskWoken ) ) + +/** + * semphr. h + * 
SemaphoreHandle_t xSemaphoreCreateMutex( void )
+ * + * Creates a new mutex type semaphore instance, and returns a handle by which + * the new mutex can be referenced. + * + * Internally, within the FreeRTOS implementation, mutex semaphores use a block + * of memory, in which the mutex structure is stored. If a mutex is created + * using xSemaphoreCreateMutex() then the required memory is automatically + * dynamically allocated inside the xSemaphoreCreateMutex() function. (see + * http://www.freertos.org/a00111.html). If a mutex is created using + * xSemaphoreCreateMutexStatic() then the application writer must provided the + * memory. xSemaphoreCreateMutexStatic() therefore allows a mutex to be created + * without using any dynamic memory allocation. + * + * Mutexes created using this function can be accessed using the xSemaphoreTake() + * and xSemaphoreGive() macros. The xSemaphoreTakeRecursive() and + * xSemaphoreGiveRecursive() macros must not be used. + * + * This type of semaphore uses a priority inheritance mechanism so a task + * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the + * semaphore it is no longer required. + * + * Mutex type semaphores cannot be used from within interrupt service routines. + * + * See xSemaphoreCreateBinary() for an alternative implementation that can be + * used for pure synchronisation (where one task or interrupt always 'gives' the + * semaphore and another always 'takes' the semaphore) and from within interrupt + * service routines. + * + * @return If the mutex was successfully created then a handle to the created + * semaphore is returned. If there was not enough heap to allocate the mutex + * data structures then NULL is returned. + * + * Example usage: + 
+ SemaphoreHandle_t xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+    // Semaphore cannot be used before a call to xSemaphoreCreateMutex().
+    // This is a macro so pass the variable in directly.
+    xSemaphore = xSemaphoreCreateMutex();
+
+    if( xSemaphore != NULL )
+    {
+        // The semaphore was created successfully.
+        // The semaphore can now be used.
+    }
+ }
+
+ * \defgroup xSemaphoreCreateMutex xSemaphoreCreateMutex + * \ingroup Semaphores + */ +#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + #define xSemaphoreCreateMutex() xQueueCreateMutex( queueQUEUE_TYPE_MUTEX ) +#endif + +/** + * semphr. h + * 
SemaphoreHandle_t xSemaphoreCreateMutexStatic( StaticSemaphore_t *pxMutexBuffer )
+ * + * Creates a new mutex type semaphore instance, and returns a handle by which + * the new mutex can be referenced. + * + * Internally, within the FreeRTOS implementation, mutex semaphores use a block + * of memory, in which the mutex structure is stored. If a mutex is created + * using xSemaphoreCreateMutex() then the required memory is automatically + * dynamically allocated inside the xSemaphoreCreateMutex() function. (see + * http://www.freertos.org/a00111.html). If a mutex is created using + * xSemaphoreCreateMutexStatic() then the application writer must provided the + * memory. xSemaphoreCreateMutexStatic() therefore allows a mutex to be created + * without using any dynamic memory allocation. + * + * Mutexes created using this function can be accessed using the xSemaphoreTake() + * and xSemaphoreGive() macros. The xSemaphoreTakeRecursive() and + * xSemaphoreGiveRecursive() macros must not be used. + * + * This type of semaphore uses a priority inheritance mechanism so a task + * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the + * semaphore it is no longer required. + * + * Mutex type semaphores cannot be used from within interrupt service routines. + * + * See xSemaphoreCreateBinary() for an alternative implementation that can be + * used for pure synchronisation (where one task or interrupt always 'gives' the + * semaphore and another always 'takes' the semaphore) and from within interrupt + * service routines. + * + * @param pxMutexBuffer Must point to a variable of type StaticSemaphore_t, + * which will be used to hold the mutex's data structure, removing the need for + * the memory to be allocated dynamically. + * + * @return If the mutex was successfully created then a handle to the created + * mutex is returned. If pxMutexBuffer was NULL then NULL is returned. + * + * Example usage: + 
+ SemaphoreHandle_t xSemaphore;
+ StaticSemaphore_t xMutexBuffer;
+
+ void vATask( void * pvParameters )
+ {
+    // A mutex cannot be used before it has been created.  xMutexBuffer is
+    // into xSemaphoreCreateMutexStatic() so no dynamic memory allocation is
+    // attempted.
+    xSemaphore = xSemaphoreCreateMutexStatic( &xMutexBuffer );
+
+    // As no dynamic memory allocation was performed, xSemaphore cannot be NULL,
+    // so there is no need to check it.
+ }
+
+ * \defgroup xSemaphoreCreateMutexStatic xSemaphoreCreateMutexStatic + * \ingroup Semaphores + */ + #if( configSUPPORT_STATIC_ALLOCATION == 1 ) + #define xSemaphoreCreateMutexStatic( pxMutexBuffer ) xQueueCreateMutexStatic( queueQUEUE_TYPE_MUTEX, ( pxMutexBuffer ) ) +#endif /* configSUPPORT_STATIC_ALLOCATION */ + + +/** + * semphr. h + * 
SemaphoreHandle_t xSemaphoreCreateRecursiveMutex( void )
+ * + * Creates a new recursive mutex type semaphore instance, and returns a handle + * by which the new recursive mutex can be referenced. + * + * Internally, within the FreeRTOS implementation, recursive mutexs use a block + * of memory, in which the mutex structure is stored. If a recursive mutex is + * created using xSemaphoreCreateRecursiveMutex() then the required memory is + * automatically dynamically allocated inside the + * xSemaphoreCreateRecursiveMutex() function. (see + * http://www.freertos.org/a00111.html). If a recursive mutex is created using + * xSemaphoreCreateRecursiveMutexStatic() then the application writer must + * provide the memory that will get used by the mutex. + * xSemaphoreCreateRecursiveMutexStatic() therefore allows a recursive mutex to + * be created without using any dynamic memory allocation. + * + * Mutexes created using this macro can be accessed using the + * xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() macros. The + * xSemaphoreTake() and xSemaphoreGive() macros must not be used. + * + * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex + * doesn't become available again until the owner has called + * xSemaphoreGiveRecursive() for each successful 'take' request. For example, + * if a task successfully 'takes' the same mutex 5 times then the mutex will + * not be available to any other task until it has also 'given' the mutex back + * exactly five times. + * + * This type of semaphore uses a priority inheritance mechanism so a task + * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the + * semaphore it is no longer required. + * + * Mutex type semaphores cannot be used from within interrupt service routines. + * + * See xSemaphoreCreateBinary() for an alternative implementation that can be + * used for pure synchronisation (where one task or interrupt always 'gives' the + * semaphore and another always 'takes' the semaphore) and from within interrupt + * service routines. + * + * @return xSemaphore Handle to the created mutex semaphore. Should be of type + * SemaphoreHandle_t. + * + * Example usage: + 
+ SemaphoreHandle_t xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+    // Semaphore cannot be used before a call to xSemaphoreCreateMutex().
+    // This is a macro so pass the variable in directly.
+    xSemaphore = xSemaphoreCreateRecursiveMutex();
+
+    if( xSemaphore != NULL )
+    {
+        // The semaphore was created successfully.
+        // The semaphore can now be used.
+    }
+ }
+
+ * \defgroup xSemaphoreCreateRecursiveMutex xSemaphoreCreateRecursiveMutex + * \ingroup Semaphores + */ +#if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configUSE_RECURSIVE_MUTEXES == 1 ) ) + #define xSemaphoreCreateRecursiveMutex() xQueueCreateMutex( queueQUEUE_TYPE_RECURSIVE_MUTEX ) +#endif + +/** + * semphr. h + * 
SemaphoreHandle_t xSemaphoreCreateRecursiveMutexStatic( StaticSemaphore_t *pxMutexBuffer )
+ * + * Creates a new recursive mutex type semaphore instance, and returns a handle + * by which the new recursive mutex can be referenced. + * + * Internally, within the FreeRTOS implementation, recursive mutexs use a block + * of memory, in which the mutex structure is stored. If a recursive mutex is + * created using xSemaphoreCreateRecursiveMutex() then the required memory is + * automatically dynamically allocated inside the + * xSemaphoreCreateRecursiveMutex() function. (see + * http://www.freertos.org/a00111.html). If a recursive mutex is created using + * xSemaphoreCreateRecursiveMutexStatic() then the application writer must + * provide the memory that will get used by the mutex. + * xSemaphoreCreateRecursiveMutexStatic() therefore allows a recursive mutex to + * be created without using any dynamic memory allocation. + * + * Mutexes created using this macro can be accessed using the + * xSemaphoreTakeRecursive() and xSemaphoreGiveRecursive() macros. The + * xSemaphoreTake() and xSemaphoreGive() macros must not be used. + * + * A mutex used recursively can be 'taken' repeatedly by the owner. The mutex + * doesn't become available again until the owner has called + * xSemaphoreGiveRecursive() for each successful 'take' request. For example, + * if a task successfully 'takes' the same mutex 5 times then the mutex will + * not be available to any other task until it has also 'given' the mutex back + * exactly five times. + * + * This type of semaphore uses a priority inheritance mechanism so a task + * 'taking' a semaphore MUST ALWAYS 'give' the semaphore back once the + * semaphore it is no longer required. + * + * Mutex type semaphores cannot be used from within interrupt service routines. + * + * See xSemaphoreCreateBinary() for an alternative implementation that can be + * used for pure synchronisation (where one task or interrupt always 'gives' the + * semaphore and another always 'takes' the semaphore) and from within interrupt + * service routines. + * + * @param pxMutexBuffer Must point to a variable of type StaticSemaphore_t, + * which will then be used to hold the recursive mutex's data structure, + * removing the need for the memory to be allocated dynamically. + * + * @return If the recursive mutex was successfully created then a handle to the + * created recursive mutex is returned. If pxMutexBuffer was NULL then NULL is + * returned. + * + * Example usage: + 
+ SemaphoreHandle_t xSemaphore;
+ StaticSemaphore_t xMutexBuffer;
+
+ void vATask( void * pvParameters )
+ {
+    // A recursive semaphore cannot be used before it is created.  Here a
+    // recursive mutex is created using xSemaphoreCreateRecursiveMutexStatic().
+    // The address of xMutexBuffer is passed into the function, and will hold
+    // the mutexes data structures - so no dynamic memory allocation will be
+    // attempted.
+    xSemaphore = xSemaphoreCreateRecursiveMutexStatic( &xMutexBuffer );
+
+    // As no dynamic memory allocation was performed, xSemaphore cannot be NULL,
+    // so there is no need to check it.
+ }
+
+ * \defgroup xSemaphoreCreateRecursiveMutexStatic xSemaphoreCreateRecursiveMutexStatic + * \ingroup Semaphores + */ +#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configUSE_RECURSIVE_MUTEXES == 1 ) ) + #define xSemaphoreCreateRecursiveMutexStatic( pxStaticSemaphore ) xQueueCreateMutexStatic( queueQUEUE_TYPE_RECURSIVE_MUTEX, pxStaticSemaphore ) +#endif /* configSUPPORT_STATIC_ALLOCATION */ + +/** + * semphr. h + * 
SemaphoreHandle_t xSemaphoreCreateCounting( UBaseType_t uxMaxCount, UBaseType_t uxInitialCount )
+ * + * Creates a new counting semaphore instance, and returns a handle by which the + * new counting semaphore can be referenced. + * + * In many usage scenarios it is faster and more memory efficient to use a + * direct to task notification in place of a counting semaphore! + * http://www.freertos.org/RTOS-task-notifications.html + * + * Internally, within the FreeRTOS implementation, counting semaphores use a + * block of memory, in which the counting semaphore structure is stored. If a + * counting semaphore is created using xSemaphoreCreateCounting() then the + * required memory is automatically dynamically allocated inside the + * xSemaphoreCreateCounting() function. (see + * http://www.freertos.org/a00111.html). If a counting semaphore is created + * using xSemaphoreCreateCountingStatic() then the application writer can + * instead optionally provide the memory that will get used by the counting + * semaphore. xSemaphoreCreateCountingStatic() therefore allows a counting + * semaphore to be created without using any dynamic memory allocation. + * + * Counting semaphores are typically used for two things: + * + * 1) Counting events. + * + * In this usage scenario an event handler will 'give' a semaphore each time + * an event occurs (incrementing the semaphore count value), and a handler + * task will 'take' a semaphore each time it processes an event + * (decrementing the semaphore count value). The count value is therefore + * the difference between the number of events that have occurred and the + * number that have been processed. In this case it is desirable for the + * initial count value to be zero. + * + * 2) Resource management. + * + * In this usage scenario the count value indicates the number of resources + * available. To obtain control of a resource a task must first obtain a + * semaphore - decrementing the semaphore count value. When the count value + * reaches zero there are no free resources. When a task finishes with the + * resource it 'gives' the semaphore back - incrementing the semaphore count + * value. In this case it is desirable for the initial count value to be + * equal to the maximum count value, indicating that all resources are free. + * + * @param uxMaxCount The maximum count value that can be reached. When the + * semaphore reaches this value it can no longer be 'given'. + * + * @param uxInitialCount The count value assigned to the semaphore when it is + * created. + * + * @return Handle to the created semaphore. Null if the semaphore could not be + * created. + * + * Example usage: + 
+ SemaphoreHandle_t xSemaphore;
+
+ void vATask( void * pvParameters )
+ {
+ SemaphoreHandle_t xSemaphore = NULL;
+
+    // Semaphore cannot be used before a call to xSemaphoreCreateCounting().
+    // The max value to which the semaphore can count should be 10, and the
+    // initial value assigned to the count should be 0.
+    xSemaphore = xSemaphoreCreateCounting( 10, 0 );
+
+    if( xSemaphore != NULL )
+    {
+        // The semaphore was created successfully.
+        // The semaphore can now be used.
+    }
+ }
+
+ * \defgroup xSemaphoreCreateCounting xSemaphoreCreateCounting + * \ingroup Semaphores + */ +#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + #define xSemaphoreCreateCounting( uxMaxCount, uxInitialCount ) xQueueCreateCountingSemaphore( ( uxMaxCount ), ( uxInitialCount ) ) +#endif + +/** + * semphr. h + * 
SemaphoreHandle_t xSemaphoreCreateCountingStatic( UBaseType_t uxMaxCount, UBaseType_t uxInitialCount, StaticSemaphore_t *pxSemaphoreBuffer )
+ * + * Creates a new counting semaphore instance, and returns a handle by which the + * new counting semaphore can be referenced. + * + * In many usage scenarios it is faster and more memory efficient to use a + * direct to task notification in place of a counting semaphore! + * http://www.freertos.org/RTOS-task-notifications.html + * + * Internally, within the FreeRTOS implementation, counting semaphores use a + * block of memory, in which the counting semaphore structure is stored. If a + * counting semaphore is created using xSemaphoreCreateCounting() then the + * required memory is automatically dynamically allocated inside the + * xSemaphoreCreateCounting() function. (see + * http://www.freertos.org/a00111.html). If a counting semaphore is created + * using xSemaphoreCreateCountingStatic() then the application writer must + * provide the memory. xSemaphoreCreateCountingStatic() therefore allows a + * counting semaphore to be created without using any dynamic memory allocation. + * + * Counting semaphores are typically used for two things: + * + * 1) Counting events. + * + * In this usage scenario an event handler will 'give' a semaphore each time + * an event occurs (incrementing the semaphore count value), and a handler + * task will 'take' a semaphore each time it processes an event + * (decrementing the semaphore count value). The count value is therefore + * the difference between the number of events that have occurred and the + * number that have been processed. In this case it is desirable for the + * initial count value to be zero. + * + * 2) Resource management. + * + * In this usage scenario the count value indicates the number of resources + * available. To obtain control of a resource a task must first obtain a + * semaphore - decrementing the semaphore count value. When the count value + * reaches zero there are no free resources. When a task finishes with the + * resource it 'gives' the semaphore back - incrementing the semaphore count + * value. In this case it is desirable for the initial count value to be + * equal to the maximum count value, indicating that all resources are free. + * + * @param uxMaxCount The maximum count value that can be reached. When the + * semaphore reaches this value it can no longer be 'given'. + * + * @param uxInitialCount The count value assigned to the semaphore when it is + * created. + * + * @param pxSemaphoreBuffer Must point to a variable of type StaticSemaphore_t, + * which will then be used to hold the semaphore's data structure, removing the + * need for the memory to be allocated dynamically. + * + * @return If the counting semaphore was successfully created then a handle to + * the created counting semaphore is returned. If pxSemaphoreBuffer was NULL + * then NULL is returned. + * + * Example usage: + 
+ SemaphoreHandle_t xSemaphore;
+ StaticSemaphore_t xSemaphoreBuffer;
+
+ void vATask( void * pvParameters )
+ {
+ SemaphoreHandle_t xSemaphore = NULL;
+
+    // Counting semaphore cannot be used before they have been created.  Create
+    // a counting semaphore using xSemaphoreCreateCountingStatic().  The max
+    // value to which the semaphore can count is 10, and the initial value
+    // assigned to the count will be 0.  The address of xSemaphoreBuffer is
+    // passed in and will be used to hold the semaphore structure, so no dynamic
+    // memory allocation will be used.
+    xSemaphore = xSemaphoreCreateCounting( 10, 0, &xSemaphoreBuffer );
+
+    // No memory allocation was attempted so xSemaphore cannot be NULL, so there
+    // is no need to check its value.
+ }
+
+ * \defgroup xSemaphoreCreateCountingStatic xSemaphoreCreateCountingStatic + * \ingroup Semaphores + */ +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + #define xSemaphoreCreateCountingStatic( uxMaxCount, uxInitialCount, pxSemaphoreBuffer ) xQueueCreateCountingSemaphoreStatic( ( uxMaxCount ), ( uxInitialCount ), ( pxSemaphoreBuffer ) ) +#endif /* configSUPPORT_STATIC_ALLOCATION */ + +/** + * semphr. h + * 
void vSemaphoreDelete( SemaphoreHandle_t xSemaphore );
+ * + * Delete a semaphore. This function must be used with care. For example, + * do not delete a mutex type semaphore if the mutex is held by a task. + * + * @param xSemaphore A handle to the semaphore to be deleted. + * + * \defgroup vSemaphoreDelete vSemaphoreDelete + * \ingroup Semaphores + */ +#define vSemaphoreDelete( xSemaphore ) vQueueDelete( ( QueueHandle_t ) ( xSemaphore ) ) + +/** + * semphr.h + * 
TaskHandle_t xSemaphoreGetMutexHolder( SemaphoreHandle_t xMutex );
+ * + * If xMutex is indeed a mutex type semaphore, return the current mutex holder. + * If xMutex is not a mutex type semaphore, or the mutex is available (not held + * by a task), return NULL. + * + * Note: This is a good way of determining if the calling task is the mutex + * holder, but not a good way of determining the identity of the mutex holder as + * the holder may change between the function exiting and the returned value + * being tested. + */ +#define xSemaphoreGetMutexHolder( xSemaphore ) xQueueGetMutexHolder( ( xSemaphore ) ) + +/** + * semphr.h + * 
UBaseType_t uxSemaphoreGetCount( SemaphoreHandle_t xSemaphore );
+ * + * If the semaphore is a counting semaphore then uxSemaphoreGetCount() returns + * its current count value. If the semaphore is a binary semaphore then + * uxSemaphoreGetCount() returns 1 if the semaphore is available, and 0 if the + * semaphore is not available. + * + */ +#define uxSemaphoreGetCount( xSemaphore ) uxQueueMessagesWaiting( ( QueueHandle_t ) ( xSemaphore ) ) + +#endif /* SEMAPHORE_H */ + + diff --git a/Program/XLLC/FreeRTOS/include/stdint.readme b/Program/XLLC/FreeRTOS/include/stdint.readme new file mode 100644 index 0000000000000000000000000000000000000000..6d86149ca6bcc6719648f0ca98d3263f706d273c --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/stdint.readme @@ -0,0 +1,27 @@ + +#ifndef FREERTOS_STDINT +#define FREERTOS_STDINT + +/******************************************************************************* + * THIS IS NOT A FULL stdint.h IMPLEMENTATION - It only contains the definitions + * necessary to build the FreeRTOS code. It is provided to allow FreeRTOS to be + * built using compilers that do not provide their own stdint.h definition. + * + * To use this file: + * + * 1) Copy this file into the directory that contains your FreeRTOSConfig.h + * header file, as that directory will already be in the compilers include + * path. + * + * 2) Rename the copied file stdint.h. + * + */ + +typedef signed char int8_t; +typedef unsigned char uint8_t; +typedef short int16_t; +typedef unsigned short uint16_t; +typedef long int32_t; +typedef unsigned long uint32_t; + +#endif /* FREERTOS_STDINT */ diff --git a/Program/XLLC/FreeRTOS/include/task.h b/Program/XLLC/FreeRTOS/include/task.h new file mode 100644 index 0000000000000000000000000000000000000000..5e409c8dd8d6a6e75df976041738d0f3843ef4ac --- /dev/null +++ b/Program/XLLC/FreeRTOS/include/task.h @@ -0,0 +1,2267 @@ +/* + FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd. + All rights reserved + + VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION. + + This file is part of the FreeRTOS distribution. + + FreeRTOS is free software; you can redistribute it and/or modify it under + the terms of the GNU General Public License (version 2) as published by the + Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception. + + *************************************************************************** + >>! NOTE: The modification to the GPL is included to allow you to !<< + >>! distribute a combined work that includes FreeRTOS without being !<< + >>! obliged to provide the source code for proprietary components !<< + >>! outside of the FreeRTOS kernel. !<< + *************************************************************************** + + FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY + WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. Full license text is available on the following + link: http://www.freertos.org/a00114.html + + *************************************************************************** + * * + * FreeRTOS provides completely free yet professionally developed, * + * robust, strictly quality controlled, supported, and cross * + * platform software that is more than just the market leader, it * + * is the industry's de facto standard. * + * * + * Help yourself get started quickly while simultaneously helping * + * to support the FreeRTOS project by purchasing a FreeRTOS * + * tutorial book, reference manual, or both: * + * http://www.FreeRTOS.org/Documentation * + * * + *************************************************************************** + + http://www.FreeRTOS.org/FAQHelp.html - Having a problem? Start by reading + the FAQ page "My application does not run, what could be wrong?". Have you + defined configASSERT()? + + http://www.FreeRTOS.org/support - In return for receiving this top quality + embedded software for free we request you assist our global community by + participating in the support forum. + + http://www.FreeRTOS.org/training - Investing in training allows your team to + be as productive as possible as early as possible. Now you can receive + FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers + Ltd, and the world's leading authority on the world's leading RTOS. + + http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products, + including FreeRTOS+Trace - an indispensable productivity tool, a DOS + compatible FAT file system, and our tiny thread aware UDP/IP stack. + + http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate. + Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS. + + http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High + Integrity Systems ltd. to sell under the OpenRTOS brand. Low cost OpenRTOS + licenses offer ticketed support, indemnification and commercial middleware. + + http://www.SafeRTOS.com - High Integrity Systems also provide a safety + engineered and independently SIL3 certified version for use in safety and + mission critical applications that require provable dependability. + + 1 tab == 4 spaces! +*/ + + +#ifndef INC_TASK_H +#define INC_TASK_H + +#ifndef INC_FREERTOS_H + #error "include FreeRTOS.h must appear in source files before include task.h" +#endif + +#include "list.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------- + * MACROS AND DEFINITIONS + *----------------------------------------------------------*/ + +#define tskKERNEL_VERSION_NUMBER "V9.0.0" +#define tskKERNEL_VERSION_MAJOR 9 +#define tskKERNEL_VERSION_MINOR 0 +#define tskKERNEL_VERSION_BUILD 0 + +/** + * task. h + * + * Type by which tasks are referenced. For example, a call to xTaskCreate + * returns (via a pointer parameter) an TaskHandle_t variable that can then + * be used as a parameter to vTaskDelete to delete the task. + * + * \defgroup TaskHandle_t TaskHandle_t + * \ingroup Tasks + */ +typedef void * TaskHandle_t; + +/* + * Defines the prototype to which the application task hook function must + * conform. + */ +typedef BaseType_t (*TaskHookFunction_t)( void * ); + +/* Task states returned by eTaskGetState. */ +typedef enum +{ + eRunning = 0, /* A task is querying the state of itself, so must be running. */ + eReady, /* The task being queried is in a read or pending ready list. */ + eBlocked, /* The task being queried is in the Blocked state. */ + eSuspended, /* The task being queried is in the Suspended state, or is in the Blocked state with an infinite time out. */ + eDeleted, /* The task being queried has been deleted, but its TCB has not yet been freed. */ + eInvalid /* Used as an 'invalid state' value. */ +} eTaskState; + +/* Actions that can be performed when vTaskNotify() is called. */ +typedef enum +{ + eNoAction = 0, /* Notify the task without updating its notify value. */ + eSetBits, /* Set bits in the task's notification value. */ + eIncrement, /* Increment the task's notification value. */ + eSetValueWithOverwrite, /* Set the task's notification value to a specific value even if the previous value has not yet been read by the task. */ + eSetValueWithoutOverwrite /* Set the task's notification value if the previous value has been read by the task. */ +} eNotifyAction; + +/* + * Used internally only. + */ +typedef struct xTIME_OUT +{ + BaseType_t xOverflowCount; + TickType_t xTimeOnEntering; +} TimeOut_t; + +/* + * Defines the memory ranges allocated to the task when an MPU is used. + */ +typedef struct xMEMORY_REGION +{ + void *pvBaseAddress; + uint32_t ulLengthInBytes; + uint32_t ulParameters; +} MemoryRegion_t; + +/* + * Parameters required to create an MPU protected task. + */ +typedef struct xTASK_PARAMETERS +{ + TaskFunction_t pvTaskCode; + const char * const pcName; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */ + uint16_t usStackDepth; + void *pvParameters; + UBaseType_t uxPriority; + StackType_t *puxStackBuffer; + MemoryRegion_t xRegions[ portNUM_CONFIGURABLE_REGIONS ]; +} TaskParameters_t; + +/* Used with the uxTaskGetSystemState() function to return the state of each task +in the system. */ +typedef struct xTASK_STATUS +{ + TaskHandle_t xHandle; /* The handle of the task to which the rest of the information in the structure relates. */ + const char *pcTaskName; /* A pointer to the task's name. This value will be invalid if the task was deleted since the structure was populated! */ /*lint !e971 Unqualified char types are allowed for strings and single characters only. */ + UBaseType_t xTaskNumber; /* A number unique to the task. */ + eTaskState eCurrentState; /* The state in which the task existed when the structure was populated. */ + UBaseType_t uxCurrentPriority; /* The priority at which the task was running (may be inherited) when the structure was populated. */ + UBaseType_t uxBasePriority; /* The priority to which the task will return if the task's current priority has been inherited to avoid unbounded priority inversion when obtaining a mutex. Only valid if configUSE_MUTEXES is defined as 1 in FreeRTOSConfig.h. */ + uint32_t ulRunTimeCounter; /* The total run time allocated to the task so far, as defined by the run time stats clock. See http://www.freertos.org/rtos-run-time-stats.html. Only valid when configGENERATE_RUN_TIME_STATS is defined as 1 in FreeRTOSConfig.h. */ + StackType_t *pxStackBase; /* Points to the lowest address of the task's stack area. */ + uint16_t usStackHighWaterMark; /* The minimum amount of stack space that has remained for the task since the task was created. The closer this value is to zero the closer the task has come to overflowing its stack. */ +} TaskStatus_t; + +/* Possible return values for eTaskConfirmSleepModeStatus(). */ +typedef enum +{ + eAbortSleep = 0, /* A task has been made ready or a context switch pended since portSUPPORESS_TICKS_AND_SLEEP() was called - abort entering a sleep mode. */ + eStandardSleep, /* Enter a sleep mode that will not last any longer than the expected idle time. */ + eNoTasksWaitingTimeout /* No tasks are waiting for a timeout so it is safe to enter a sleep mode that can only be exited by an external interrupt. */ +} eSleepModeStatus; + +/** + * Defines the priority used by the idle task. This must not be modified. + * + * \ingroup TaskUtils + */ +#define tskIDLE_PRIORITY ( ( UBaseType_t ) 0U ) + +/** + * task. h + * + * Macro for forcing a context switch. + * + * \defgroup taskYIELD taskYIELD + * \ingroup SchedulerControl + */ +#define taskYIELD() portYIELD() + +/** + * task. h + * + * Macro to mark the start of a critical code region. Preemptive context + * switches cannot occur when in a critical region. + * + * NOTE: This may alter the stack (depending on the portable implementation) + * so must be used with care! + * + * \defgroup taskENTER_CRITICAL taskENTER_CRITICAL + * \ingroup SchedulerControl + */ +#define taskENTER_CRITICAL() portENTER_CRITICAL() +#define taskENTER_CRITICAL_FROM_ISR() portSET_INTERRUPT_MASK_FROM_ISR() + +/** + * task. h + * + * Macro to mark the end of a critical code region. Preemptive context + * switches cannot occur when in a critical region. + * + * NOTE: This may alter the stack (depending on the portable implementation) + * so must be used with care! + * + * \defgroup taskEXIT_CRITICAL taskEXIT_CRITICAL + * \ingroup SchedulerControl + */ +#define taskEXIT_CRITICAL() portEXIT_CRITICAL() +#define taskEXIT_CRITICAL_FROM_ISR( x ) portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) +/** + * task. h + * + * Macro to disable all maskable interrupts. + * + * \defgroup taskDISABLE_INTERRUPTS taskDISABLE_INTERRUPTS + * \ingroup SchedulerControl + */ +#define taskDISABLE_INTERRUPTS() portDISABLE_INTERRUPTS() + +/** + * task. h + * + * Macro to enable microcontroller interrupts. + * + * \defgroup taskENABLE_INTERRUPTS taskENABLE_INTERRUPTS + * \ingroup SchedulerControl + */ +#define taskENABLE_INTERRUPTS() portENABLE_INTERRUPTS() + +/* Definitions returned by xTaskGetSchedulerState(). taskSCHEDULER_SUSPENDED is +0 to generate more optimal code when configASSERT() is defined as the constant +is used in assert() statements. */ +#define taskSCHEDULER_SUSPENDED ( ( BaseType_t ) 0 ) +#define taskSCHEDULER_NOT_STARTED ( ( BaseType_t ) 1 ) +#define taskSCHEDULER_RUNNING ( ( BaseType_t ) 2 ) + + +/*----------------------------------------------------------- + * TASK CREATION API + *----------------------------------------------------------*/ + +/** + * task. h + *
+ BaseType_t xTaskCreate(
+							  TaskFunction_t pvTaskCode,
+							  const char * const pcName,
+							  uint16_t usStackDepth,
+							  void *pvParameters,
+							  UBaseType_t uxPriority,
+							  TaskHandle_t *pvCreatedTask
+						  );
+ * + * Create a new task and add it to the list of tasks that are ready to run. + * + * Internally, within the FreeRTOS implementation, tasks use two blocks of + * memory. The first block is used to hold the task's data structures. The + * second block is used by the task as its stack. If a task is created using + * xTaskCreate() then both blocks of memory are automatically dynamically + * allocated inside the xTaskCreate() function. (see + * http://www.freertos.org/a00111.html). If a task is created using + * xTaskCreateStatic() then the application writer must provide the required + * memory. xTaskCreateStatic() therefore allows a task to be created without + * using any dynamic memory allocation. + * + * See xTaskCreateStatic() for a version that does not use any dynamic memory + * allocation. + * + * xTaskCreate() can only be used to create a task that has unrestricted + * access to the entire microcontroller memory map. Systems that include MPU + * support can alternatively create an MPU constrained task using + * xTaskCreateRestricted(). + * + * @param pvTaskCode Pointer to the task entry function. Tasks + * must be implemented to never return (i.e. continuous loop). + * + * @param pcName A descriptive name for the task. This is mainly used to + * facilitate debugging. Max length defined by configMAX_TASK_NAME_LEN - default + * is 16. + * + * @param usStackDepth The size of the task stack specified as the number of + * variables the stack can hold - not the number of bytes. For example, if + * the stack is 16 bits wide and usStackDepth is defined as 100, 200 bytes + * will be allocated for stack storage. + * + * @param pvParameters Pointer that will be used as the parameter for the task + * being created. + * + * @param uxPriority The priority at which the task should run. Systems that + * include MPU support can optionally create tasks in a privileged (system) + * mode by setting bit portPRIVILEGE_BIT of the priority parameter. For + * example, to create a privileged task at priority 2 the uxPriority parameter + * should be set to ( 2 | portPRIVILEGE_BIT ). + * + * @param pvCreatedTask Used to pass back a handle by which the created task + * can be referenced. + * + * @return pdPASS if the task was successfully created and added to a ready + * list, otherwise an error code defined in the file projdefs.h + * + * Example usage: + 
+ // Task to be created.
+ void vTaskCode( void * pvParameters )
+ {
+	 for( ;; )
+	 {
+		 // Task code goes here.
+	 }
+ }
+
+ // Function that creates a task.
+ void vOtherFunction( void )
+ {
+ static uint8_t ucParameterToPass;
+ TaskHandle_t xHandle = NULL;
+
+	 // Create the task, storing the handle.  Note that the passed parameter ucParameterToPass
+	 // must exist for the lifetime of the task, so in this case is declared static.  If it was just an
+	 // an automatic stack variable it might no longer exist, or at least have been corrupted, by the time
+	 // the new task attempts to access it.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, &ucParameterToPass, tskIDLE_PRIORITY, &xHandle );
+     configASSERT( xHandle );
+
+	 // Use the handle to delete the task.
+     if( xHandle != NULL )
+     {
+	     vTaskDelete( xHandle );
+     }
+ }
+
+ * \defgroup xTaskCreate xTaskCreate + * \ingroup Tasks + */ +#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) + BaseType_t xTaskCreate( TaskFunction_t pxTaskCode, + const char * const pcName, + const uint16_t usStackDepth, + void * const pvParameters, + UBaseType_t uxPriority, + TaskHandle_t * const pxCreatedTask ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */ +#endif + +/** + * task. h + *
+ TaskHandle_t xTaskCreateStatic( TaskFunction_t pvTaskCode,
+								 const char * const pcName,
+								 uint32_t ulStackDepth,
+								 void *pvParameters,
+								 UBaseType_t uxPriority,
+								 StackType_t *pxStackBuffer,
+								 StaticTask_t *pxTaskBuffer );
+ * + * Create a new task and add it to the list of tasks that are ready to run. + * + * Internally, within the FreeRTOS implementation, tasks use two blocks of + * memory. The first block is used to hold the task's data structures. The + * second block is used by the task as its stack. If a task is created using + * xTaskCreate() then both blocks of memory are automatically dynamically + * allocated inside the xTaskCreate() function. (see + * http://www.freertos.org/a00111.html). If a task is created using + * xTaskCreateStatic() then the application writer must provide the required + * memory. xTaskCreateStatic() therefore allows a task to be created without + * using any dynamic memory allocation. + * + * @param pvTaskCode Pointer to the task entry function. Tasks + * must be implemented to never return (i.e. continuous loop). + * + * @param pcName A descriptive name for the task. This is mainly used to + * facilitate debugging. The maximum length of the string is defined by + * configMAX_TASK_NAME_LEN in FreeRTOSConfig.h. + * + * @param ulStackDepth The size of the task stack specified as the number of + * variables the stack can hold - not the number of bytes. For example, if + * the stack is 32-bits wide and ulStackDepth is defined as 100 then 400 bytes + * will be allocated for stack storage. + * + * @param pvParameters Pointer that will be used as the parameter for the task + * being created. + * + * @param uxPriority The priority at which the task will run. + * + * @param pxStackBuffer Must point to a StackType_t array that has at least + * ulStackDepth indexes - the array will then be used as the task's stack, + * removing the need for the stack to be allocated dynamically. + * + * @param pxTaskBuffer Must point to a variable of type StaticTask_t, which will + * then be used to hold the task's data structures, removing the need for the + * memory to be allocated dynamically. + * + * @return If neither pxStackBuffer or pxTaskBuffer are NULL, then the task will + * be created and pdPASS is returned. If either pxStackBuffer or pxTaskBuffer + * are NULL then the task will not be created and + * errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY is returned. + * + * Example usage: + 
+
+    // Dimensions the buffer that the task being created will use as its stack.
+    // NOTE:  This is the number of words the stack will hold, not the number of
+    // bytes.  For example, if each stack item is 32-bits, and this is set to 100,
+    // then 400 bytes (100 * 32-bits) will be allocated.
+    #define STACK_SIZE 200
+
+    // Structure that will hold the TCB of the task being created.
+    StaticTask_t xTaskBuffer;
+
+    // Buffer that the task being created will use as its stack.  Note this is
+    // an array of StackType_t variables.  The size of StackType_t is dependent on
+    // the RTOS port.
+    StackType_t xStack[ STACK_SIZE ];
+
+    // Function that implements the task being created.
+    void vTaskCode( void * pvParameters )
+    {
+        // The parameter value is expected to be 1 as 1 is passed in the
+        // pvParameters value in the call to xTaskCreateStatic().
+        configASSERT( ( uint32_t ) pvParameters == 1UL );
+
+        for( ;; )
+        {
+            // Task code goes here.
+        }
+    }
+
+    // Function that creates a task.
+    void vOtherFunction( void )
+    {
+        TaskHandle_t xHandle = NULL;
+
+        // Create the task without using any dynamic memory allocation.
+        xHandle = xTaskCreateStatic(
+                      vTaskCode,       // Function that implements the task.
+                      "NAME",          // Text name for the task.
+                      STACK_SIZE,      // Stack size in words, not bytes.
+                      ( void * ) 1,    // Parameter passed into the task.
+                      tskIDLE_PRIORITY,// Priority at which the task is created.
+                      xStack,          // Array to use as the task's stack.
+                      &xTaskBuffer );  // Variable to hold the task's data structure.
+
+        // puxStackBuffer and pxTaskBuffer were not NULL, so the task will have
+        // been created, and xHandle will be the task's handle.  Use the handle
+        // to suspend the task.
+        vTaskSuspend( xHandle );
+    }
+
+ * \defgroup xTaskCreateStatic xTaskCreateStatic + * \ingroup Tasks + */ +#if( configSUPPORT_STATIC_ALLOCATION == 1 ) + TaskHandle_t xTaskCreateStatic( TaskFunction_t pxTaskCode, + const char * const pcName, + const uint32_t ulStackDepth, + void * const pvParameters, + UBaseType_t uxPriority, + StackType_t * const puxStackBuffer, + StaticTask_t * const pxTaskBuffer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */ +#endif /* configSUPPORT_STATIC_ALLOCATION */ + +/** + * task. h + *
+ BaseType_t xTaskCreateRestricted( TaskParameters_t *pxTaskDefinition, TaskHandle_t *pxCreatedTask );
+ * + * xTaskCreateRestricted() should only be used in systems that include an MPU + * implementation. + * + * Create a new task and add it to the list of tasks that are ready to run. + * The function parameters define the memory regions and associated access + * permissions allocated to the task. + * + * @param pxTaskDefinition Pointer to a structure that contains a member + * for each of the normal xTaskCreate() parameters (see the xTaskCreate() API + * documentation) plus an optional stack buffer and the memory region + * definitions. + * + * @param pxCreatedTask Used to pass back a handle by which the created task + * can be referenced. + * + * @return pdPASS if the task was successfully created and added to a ready + * list, otherwise an error code defined in the file projdefs.h + * + * Example usage: + 
+// Create an TaskParameters_t structure that defines the task to be created.
+static const TaskParameters_t xCheckTaskParameters =
+{
+	vATask,		// pvTaskCode - the function that implements the task.
+	"ATask",	// pcName - just a text name for the task to assist debugging.
+	100,		// usStackDepth	- the stack size DEFINED IN WORDS.
+	NULL,		// pvParameters - passed into the task function as the function parameters.
+	( 1UL | portPRIVILEGE_BIT ),// uxPriority - task priority, set the portPRIVILEGE_BIT if the task should run in a privileged state.
+	cStackBuffer,// puxStackBuffer - the buffer to be used as the task stack.
+
+	// xRegions - Allocate up to three separate memory regions for access by
+	// the task, with appropriate access permissions.  Different processors have
+	// different memory alignment requirements - refer to the FreeRTOS documentation
+	// for full information.
+	{
+		// Base address					Length	Parameters
+        { cReadWriteArray,				32,		portMPU_REGION_READ_WRITE },
+        { cReadOnlyArray,				32,		portMPU_REGION_READ_ONLY },
+        { cPrivilegedOnlyAccessArray,	128,	portMPU_REGION_PRIVILEGED_READ_WRITE }
+	}
+};
+
+int main( void )
+{
+TaskHandle_t xHandle;
+
+	// Create a task from the const structure defined above.  The task handle
+	// is requested (the second parameter is not NULL) but in this case just for
+	// demonstration purposes as its not actually used.
+	xTaskCreateRestricted( &xRegTest1Parameters, &xHandle );
+
+	// Start the scheduler.
+	vTaskStartScheduler();
+
+	// Will only get here if there was insufficient memory to create the idle
+	// and/or timer task.
+	for( ;; );
+}
+
+ * \defgroup xTaskCreateRestricted xTaskCreateRestricted + * \ingroup Tasks + */ +#if( portUSING_MPU_WRAPPERS == 1 ) + BaseType_t xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask ) PRIVILEGED_FUNCTION; +#endif + +/** + * task. h + *
+ void vTaskAllocateMPURegions( TaskHandle_t xTask, const MemoryRegion_t * const pxRegions );
+ * + * Memory regions are assigned to a restricted task when the task is created by + * a call to xTaskCreateRestricted(). These regions can be redefined using + * vTaskAllocateMPURegions(). + * + * @param xTask The handle of the task being updated. + * + * @param xRegions A pointer to an MemoryRegion_t structure that contains the + * new memory region definitions. + * + * Example usage: + 
+// Define an array of MemoryRegion_t structures that configures an MPU region
+// allowing read/write access for 1024 bytes starting at the beginning of the
+// ucOneKByte array.  The other two of the maximum 3 definable regions are
+// unused so set to zero.
+static const MemoryRegion_t xAltRegions[ portNUM_CONFIGURABLE_REGIONS ] =
+{
+	// Base address		Length		Parameters
+	{ ucOneKByte,		1024,		portMPU_REGION_READ_WRITE },
+	{ 0,				0,			0 },
+	{ 0,				0,			0 }
+};
+
+void vATask( void *pvParameters )
+{
+	// This task was created such that it has access to certain regions of
+	// memory as defined by the MPU configuration.  At some point it is
+	// desired that these MPU regions are replaced with that defined in the
+	// xAltRegions const struct above.  Use a call to vTaskAllocateMPURegions()
+	// for this purpose.  NULL is used as the task handle to indicate that this
+	// function should modify the MPU regions of the calling task.
+	vTaskAllocateMPURegions( NULL, xAltRegions );
+
+	// Now the task can continue its function, but from this point on can only
+	// access its stack and the ucOneKByte array (unless any other statically
+	// defined or shared regions have been declared elsewhere).
+}
+
+ * \defgroup xTaskCreateRestricted xTaskCreateRestricted + * \ingroup Tasks + */ +void vTaskAllocateMPURegions( TaskHandle_t xTask, const MemoryRegion_t * const pxRegions ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
void vTaskDelete( TaskHandle_t xTask );
+ * + * INCLUDE_vTaskDelete must be defined as 1 for this function to be available. + * See the configuration section for more information. + * + * Remove a task from the RTOS real time kernel's management. The task being + * deleted will be removed from all ready, blocked, suspended and event lists. + * + * NOTE: The idle task is responsible for freeing the kernel allocated + * memory from tasks that have been deleted. It is therefore important that + * the idle task is not starved of microcontroller processing time if your + * application makes any calls to vTaskDelete (). Memory allocated by the + * task code is not automatically freed, and should be freed before the task + * is deleted. + * + * See the demo application file death.c for sample code that utilises + * vTaskDelete (). + * + * @param xTask The handle of the task to be deleted. Passing NULL will + * cause the calling task to be deleted. + * + * Example usage: + 
+ void vOtherFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+	 // Create the task, storing the handle.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+	 // Use the handle to delete the task.
+	 vTaskDelete( xHandle );
+ }
+
+ * \defgroup vTaskDelete vTaskDelete + * \ingroup Tasks + */ +void vTaskDelete( TaskHandle_t xTaskToDelete ) PRIVILEGED_FUNCTION; + +/*----------------------------------------------------------- + * TASK CONTROL API + *----------------------------------------------------------*/ + +/** + * task. h + * 
void vTaskDelay( const TickType_t xTicksToDelay );
+ * + * Delay a task for a given number of ticks. The actual time that the + * task remains blocked depends on the tick rate. The constant + * portTICK_PERIOD_MS can be used to calculate real time from the tick + * rate - with the resolution of one tick period. + * + * INCLUDE_vTaskDelay must be defined as 1 for this function to be available. + * See the configuration section for more information. + * + * + * vTaskDelay() specifies a time at which the task wishes to unblock relative to + * the time at which vTaskDelay() is called. For example, specifying a block + * period of 100 ticks will cause the task to unblock 100 ticks after + * vTaskDelay() is called. vTaskDelay() does not therefore provide a good method + * of controlling the frequency of a periodic task as the path taken through the + * code, as well as other task and interrupt activity, will effect the frequency + * at which vTaskDelay() gets called and therefore the time at which the task + * next executes. See vTaskDelayUntil() for an alternative API function designed + * to facilitate fixed frequency execution. It does this by specifying an + * absolute time (rather than a relative time) at which the calling task should + * unblock. + * + * @param xTicksToDelay The amount of time, in tick periods, that + * the calling task should block. + * + * Example usage: + + void vTaskFunction( void * pvParameters ) + { + // Block for 500ms. + const TickType_t xDelay = 500 / portTICK_PERIOD_MS; + + for( ;; ) + { + // Simply toggle the LED every 500ms, blocking between each toggle. + vToggleLED(); + vTaskDelay( xDelay ); + } + } + + * \defgroup vTaskDelay vTaskDelay + * \ingroup TaskCtrl + */ +void vTaskDelay( const TickType_t xTicksToDelay ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
void vTaskDelayUntil( TickType_t *pxPreviousWakeTime, const TickType_t xTimeIncrement );
+ * + * INCLUDE_vTaskDelayUntil must be defined as 1 for this function to be available. + * See the configuration section for more information. + * + * Delay a task until a specified time. This function can be used by periodic + * tasks to ensure a constant execution frequency. + * + * This function differs from vTaskDelay () in one important aspect: vTaskDelay () will + * cause a task to block for the specified number of ticks from the time vTaskDelay () is + * called. It is therefore difficult to use vTaskDelay () by itself to generate a fixed + * execution frequency as the time between a task starting to execute and that task + * calling vTaskDelay () may not be fixed [the task may take a different path though the + * code between calls, or may get interrupted or preempted a different number of times + * each time it executes]. + * + * Whereas vTaskDelay () specifies a wake time relative to the time at which the function + * is called, vTaskDelayUntil () specifies the absolute (exact) time at which it wishes to + * unblock. + * + * The constant portTICK_PERIOD_MS can be used to calculate real time from the tick + * rate - with the resolution of one tick period. + * + * @param pxPreviousWakeTime Pointer to a variable that holds the time at which the + * task was last unblocked. The variable must be initialised with the current time + * prior to its first use (see the example below). Following this the variable is + * automatically updated within vTaskDelayUntil (). + * + * @param xTimeIncrement The cycle time period. The task will be unblocked at + * time *pxPreviousWakeTime + xTimeIncrement. Calling vTaskDelayUntil with the + * same xTimeIncrement parameter value will cause the task to execute with + * a fixed interface period. + * + * Example usage: + 
+ // Perform an action every 10 ticks.
+ void vTaskFunction( void * pvParameters )
+ {
+ TickType_t xLastWakeTime;
+ const TickType_t xFrequency = 10;
+
+	 // Initialise the xLastWakeTime variable with the current time.
+	 xLastWakeTime = xTaskGetTickCount ();
+	 for( ;; )
+	 {
+		 // Wait for the next cycle.
+		 vTaskDelayUntil( &xLastWakeTime, xFrequency );
+
+		 // Perform action here.
+	 }
+ }
+
+ * \defgroup vTaskDelayUntil vTaskDelayUntil + * \ingroup TaskCtrl + */ +void vTaskDelayUntil( TickType_t * const pxPreviousWakeTime, const TickType_t xTimeIncrement ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
BaseType_t xTaskAbortDelay( TaskHandle_t xTask );
+ * + * INCLUDE_xTaskAbortDelay must be defined as 1 in FreeRTOSConfig.h for this + * function to be available. + * + * A task will enter the Blocked state when it is waiting for an event. The + * event it is waiting for can be a temporal event (waiting for a time), such + * as when vTaskDelay() is called, or an event on an object, such as when + * xQueueReceive() or ulTaskNotifyTake() is called. If the handle of a task + * that is in the Blocked state is used in a call to xTaskAbortDelay() then the + * task will leave the Blocked state, and return from whichever function call + * placed the task into the Blocked state. + * + * @param xTask The handle of the task to remove from the Blocked state. + * + * @return If the task referenced by xTask was not in the Blocked state then + * pdFAIL is returned. Otherwise pdPASS is returned. + * + * \defgroup xTaskAbortDelay xTaskAbortDelay + * \ingroup TaskCtrl + */ +BaseType_t xTaskAbortDelay( TaskHandle_t xTask ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
UBaseType_t uxTaskPriorityGet( TaskHandle_t xTask );
+ * + * INCLUDE_uxTaskPriorityGet must be defined as 1 for this function to be available. + * See the configuration section for more information. + * + * Obtain the priority of any task. + * + * @param xTask Handle of the task to be queried. Passing a NULL + * handle results in the priority of the calling task being returned. + * + * @return The priority of xTask. + * + * Example usage: + 
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+	 // Create a task, storing the handle.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+	 // ...
+
+	 // Use the handle to obtain the priority of the created task.
+	 // It was created with tskIDLE_PRIORITY, but may have changed
+	 // it itself.
+	 if( uxTaskPriorityGet( xHandle ) != tskIDLE_PRIORITY )
+	 {
+		 // The task has changed it's priority.
+	 }
+
+	 // ...
+
+	 // Is our priority higher than the created task?
+	 if( uxTaskPriorityGet( xHandle ) < uxTaskPriorityGet( NULL ) )
+	 {
+		 // Our priority (obtained using NULL handle) is higher.
+	 }
+ }
+
+ * \defgroup uxTaskPriorityGet uxTaskPriorityGet + * \ingroup TaskCtrl + */ +UBaseType_t uxTaskPriorityGet( TaskHandle_t xTask ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
UBaseType_t uxTaskPriorityGetFromISR( TaskHandle_t xTask );
+ * + * A version of uxTaskPriorityGet() that can be used from an ISR. + */ +UBaseType_t uxTaskPriorityGetFromISR( TaskHandle_t xTask ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
eTaskState eTaskGetState( TaskHandle_t xTask );
+ * + * INCLUDE_eTaskGetState must be defined as 1 for this function to be available. + * See the configuration section for more information. + * + * Obtain the state of any task. States are encoded by the eTaskState + * enumerated type. + * + * @param xTask Handle of the task to be queried. + * + * @return The state of xTask at the time the function was called. Note the + * state of the task might change between the function being called, and the + * functions return value being tested by the calling task. + */ +eTaskState eTaskGetState( TaskHandle_t xTask ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
void vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState );
+ * + * configUSE_TRACE_FACILITY must be defined as 1 for this function to be + * available. See the configuration section for more information. + * + * Populates a TaskStatus_t structure with information about a task. + * + * @param xTask Handle of the task being queried. If xTask is NULL then + * information will be returned about the calling task. + * + * @param pxTaskStatus A pointer to the TaskStatus_t structure that will be + * filled with information about the task referenced by the handle passed using + * the xTask parameter. + * + * @xGetFreeStackSpace The TaskStatus_t structure contains a member to report + * the stack high water mark of the task being queried. Calculating the stack + * high water mark takes a relatively long time, and can make the system + * temporarily unresponsive - so the xGetFreeStackSpace parameter is provided to + * allow the high water mark checking to be skipped. The high watermark value + * will only be written to the TaskStatus_t structure if xGetFreeStackSpace is + * not set to pdFALSE; + * + * @param eState The TaskStatus_t structure contains a member to report the + * state of the task being queried. Obtaining the task state is not as fast as + * a simple assignment - so the eState parameter is provided to allow the state + * information to be omitted from the TaskStatus_t structure. To obtain state + * information then set eState to eInvalid - otherwise the value passed in + * eState will be reported as the task state in the TaskStatus_t structure. + * + * Example usage: + 
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+ TaskStatus_t xTaskDetails;
+
+    // Obtain the handle of a task from its name.
+    xHandle = xTaskGetHandle( "Task_Name" );
+
+    // Check the handle is not NULL.
+    configASSERT( xHandle );
+
+    // Use the handle to obtain further information about the task.
+    vTaskGetInfo( xHandle,
+                  &xTaskDetails,
+                  pdTRUE, // Include the high water mark in xTaskDetails.
+                  eInvalid ); // Include the task state in xTaskDetails.
+ }
+
+ * \defgroup vTaskGetInfo vTaskGetInfo + * \ingroup TaskCtrl + */ +void vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
void vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority );
+ * + * INCLUDE_vTaskPrioritySet must be defined as 1 for this function to be available. + * See the configuration section for more information. + * + * Set the priority of any task. + * + * A context switch will occur before the function returns if the priority + * being set is higher than the currently executing task. + * + * @param xTask Handle to the task for which the priority is being set. + * Passing a NULL handle results in the priority of the calling task being set. + * + * @param uxNewPriority The priority to which the task will be set. + * + * Example usage: + 
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+	 // Create a task, storing the handle.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+	 // ...
+
+	 // Use the handle to raise the priority of the created task.
+	 vTaskPrioritySet( xHandle, tskIDLE_PRIORITY + 1 );
+
+	 // ...
+
+	 // Use a NULL handle to raise our priority to the same value.
+	 vTaskPrioritySet( NULL, tskIDLE_PRIORITY + 1 );
+ }
+
+ * \defgroup vTaskPrioritySet vTaskPrioritySet + * \ingroup TaskCtrl + */ +void vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
void vTaskSuspend( TaskHandle_t xTaskToSuspend );
+ * + * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available. + * See the configuration section for more information. + * + * Suspend any task. When suspended a task will never get any microcontroller + * processing time, no matter what its priority. + * + * Calls to vTaskSuspend are not accumulative - + * i.e. calling vTaskSuspend () twice on the same task still only requires one + * call to vTaskResume () to ready the suspended task. + * + * @param xTaskToSuspend Handle to the task being suspended. Passing a NULL + * handle will cause the calling task to be suspended. + * + * Example usage: + 
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+	 // Create a task, storing the handle.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+	 // ...
+
+	 // Use the handle to suspend the created task.
+	 vTaskSuspend( xHandle );
+
+	 // ...
+
+	 // The created task will not run during this period, unless
+	 // another task calls vTaskResume( xHandle ).
+
+	 //...
+
+
+	 // Suspend ourselves.
+	 vTaskSuspend( NULL );
+
+	 // We cannot get here unless another task calls vTaskResume
+	 // with our handle as the parameter.
+ }
+
+ * \defgroup vTaskSuspend vTaskSuspend + * \ingroup TaskCtrl + */ +void vTaskSuspend( TaskHandle_t xTaskToSuspend ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
void vTaskResume( TaskHandle_t xTaskToResume );
+ * + * INCLUDE_vTaskSuspend must be defined as 1 for this function to be available. + * See the configuration section for more information. + * + * Resumes a suspended task. + * + * A task that has been suspended by one or more calls to vTaskSuspend () + * will be made available for running again by a single call to + * vTaskResume (). + * + * @param xTaskToResume Handle to the task being readied. + * + * Example usage: + 
+ void vAFunction( void )
+ {
+ TaskHandle_t xHandle;
+
+	 // Create a task, storing the handle.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, &xHandle );
+
+	 // ...
+
+	 // Use the handle to suspend the created task.
+	 vTaskSuspend( xHandle );
+
+	 // ...
+
+	 // The created task will not run during this period, unless
+	 // another task calls vTaskResume( xHandle ).
+
+	 //...
+
+
+	 // Resume the suspended task ourselves.
+	 vTaskResume( xHandle );
+
+	 // The created task will once again get microcontroller processing
+	 // time in accordance with its priority within the system.
+ }
+
+ * \defgroup vTaskResume vTaskResume + * \ingroup TaskCtrl + */ +void vTaskResume( TaskHandle_t xTaskToResume ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
void xTaskResumeFromISR( TaskHandle_t xTaskToResume );
+ * + * INCLUDE_xTaskResumeFromISR must be defined as 1 for this function to be + * available. See the configuration section for more information. + * + * An implementation of vTaskResume() that can be called from within an ISR. + * + * A task that has been suspended by one or more calls to vTaskSuspend () + * will be made available for running again by a single call to + * xTaskResumeFromISR (). + * + * xTaskResumeFromISR() should not be used to synchronise a task with an + * interrupt if there is a chance that the interrupt could arrive prior to the + * task being suspended - as this can lead to interrupts being missed. Use of a + * semaphore as a synchronisation mechanism would avoid this eventuality. + * + * @param xTaskToResume Handle to the task being readied. + * + * @return pdTRUE if resuming the task should result in a context switch, + * otherwise pdFALSE. This is used by the ISR to determine if a context switch + * may be required following the ISR. + * + * \defgroup vTaskResumeFromISR vTaskResumeFromISR + * \ingroup TaskCtrl + */ +BaseType_t xTaskResumeFromISR( TaskHandle_t xTaskToResume ) PRIVILEGED_FUNCTION; + +/*----------------------------------------------------------- + * SCHEDULER CONTROL + *----------------------------------------------------------*/ + +/** + * task. h + * 
void vTaskStartScheduler( void );
+ * + * Starts the real time kernel tick processing. After calling the kernel + * has control over which tasks are executed and when. + * + * See the demo application file main.c for an example of creating + * tasks and starting the kernel. + * + * Example usage: + 
+ void vAFunction( void )
+ {
+	 // Create at least one task before starting the kernel.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
+
+	 // Start the real time kernel with preemption.
+	 vTaskStartScheduler ();
+
+	 // Will not get here unless a task calls vTaskEndScheduler ()
+ }
+
+ * + * \defgroup vTaskStartScheduler vTaskStartScheduler + * \ingroup SchedulerControl + */ +void vTaskStartScheduler( void ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
void vTaskEndScheduler( void );
+ * + * NOTE: At the time of writing only the x86 real mode port, which runs on a PC + * in place of DOS, implements this function. + * + * Stops the real time kernel tick. All created tasks will be automatically + * deleted and multitasking (either preemptive or cooperative) will + * stop. Execution then resumes from the point where vTaskStartScheduler () + * was called, as if vTaskStartScheduler () had just returned. + * + * See the demo application file main. c in the demo/PC directory for an + * example that uses vTaskEndScheduler (). + * + * vTaskEndScheduler () requires an exit function to be defined within the + * portable layer (see vPortEndScheduler () in port. c for the PC port). This + * performs hardware specific operations such as stopping the kernel tick. + * + * vTaskEndScheduler () will cause all of the resources allocated by the + * kernel to be freed - but will not free resources allocated by application + * tasks. + * + * Example usage: + 
+ void vTaskCode( void * pvParameters )
+ {
+	 for( ;; )
+	 {
+		 // Task code goes here.
+
+		 // At some point we want to end the real time kernel processing
+		 // so call ...
+		 vTaskEndScheduler ();
+	 }
+ }
+
+ void vAFunction( void )
+ {
+	 // Create at least one task before starting the kernel.
+	 xTaskCreate( vTaskCode, "NAME", STACK_SIZE, NULL, tskIDLE_PRIORITY, NULL );
+
+	 // Start the real time kernel with preemption.
+	 vTaskStartScheduler ();
+
+	 // Will only get here when the vTaskCode () task has called
+	 // vTaskEndScheduler ().  When we get here we are back to single task
+	 // execution.
+ }
+
+ * + * \defgroup vTaskEndScheduler vTaskEndScheduler + * \ingroup SchedulerControl + */ +void vTaskEndScheduler( void ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
void vTaskSuspendAll( void );
+ * + * Suspends the scheduler without disabling interrupts. Context switches will + * not occur while the scheduler is suspended. + * + * After calling vTaskSuspendAll () the calling task will continue to execute + * without risk of being swapped out until a call to xTaskResumeAll () has been + * made. + * + * API functions that have the potential to cause a context switch (for example, + * vTaskDelayUntil(), xQueueSend(), etc.) must not be called while the scheduler + * is suspended. + * + * Example usage: + 
+ void vTask1( void * pvParameters )
+ {
+	 for( ;; )
+	 {
+		 // Task code goes here.
+
+		 // ...
+
+		 // At some point the task wants to perform a long operation during
+		 // which it does not want to get swapped out.  It cannot use
+		 // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the
+		 // operation may cause interrupts to be missed - including the
+		 // ticks.
+
+		 // Prevent the real time kernel swapping out the task.
+		 vTaskSuspendAll ();
+
+		 // Perform the operation here.  There is no need to use critical
+		 // sections as we have all the microcontroller processing time.
+		 // During this time interrupts will still operate and the kernel
+		 // tick count will be maintained.
+
+		 // ...
+
+		 // The operation is complete.  Restart the kernel.
+		 xTaskResumeAll ();
+	 }
+ }
+
+ * \defgroup vTaskSuspendAll vTaskSuspendAll + * \ingroup SchedulerControl + */ +void vTaskSuspendAll( void ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
BaseType_t xTaskResumeAll( void );
+ * + * Resumes scheduler activity after it was suspended by a call to + * vTaskSuspendAll(). + * + * xTaskResumeAll() only resumes the scheduler. It does not unsuspend tasks + * that were previously suspended by a call to vTaskSuspend(). + * + * @return If resuming the scheduler caused a context switch then pdTRUE is + * returned, otherwise pdFALSE is returned. + * + * Example usage: + 
+ void vTask1( void * pvParameters )
+ {
+	 for( ;; )
+	 {
+		 // Task code goes here.
+
+		 // ...
+
+		 // At some point the task wants to perform a long operation during
+		 // which it does not want to get swapped out.  It cannot use
+		 // taskENTER_CRITICAL ()/taskEXIT_CRITICAL () as the length of the
+		 // operation may cause interrupts to be missed - including the
+		 // ticks.
+
+		 // Prevent the real time kernel swapping out the task.
+		 vTaskSuspendAll ();
+
+		 // Perform the operation here.  There is no need to use critical
+		 // sections as we have all the microcontroller processing time.
+		 // During this time interrupts will still operate and the real
+		 // time kernel tick count will be maintained.
+
+		 // ...
+
+		 // The operation is complete.  Restart the kernel.  We want to force
+		 // a context switch - but there is no point if resuming the scheduler
+		 // caused a context switch already.
+		 if( !xTaskResumeAll () )
+		 {
+			  taskYIELD ();
+		 }
+	 }
+ }
+
+ * \defgroup xTaskResumeAll xTaskResumeAll + * \ingroup SchedulerControl + */ +BaseType_t xTaskResumeAll( void ) PRIVILEGED_FUNCTION; + +/*----------------------------------------------------------- + * TASK UTILITIES + *----------------------------------------------------------*/ + +/** + * task. h + * 
TickType_t xTaskGetTickCount( void );
+ * + * @return The count of ticks since vTaskStartScheduler was called. + * + * \defgroup xTaskGetTickCount xTaskGetTickCount + * \ingroup TaskUtils + */ +TickType_t xTaskGetTickCount( void ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
TickType_t xTaskGetTickCountFromISR( void );
+ * + * @return The count of ticks since vTaskStartScheduler was called. + * + * This is a version of xTaskGetTickCount() that is safe to be called from an + * ISR - provided that TickType_t is the natural word size of the + * microcontroller being used or interrupt nesting is either not supported or + * not being used. + * + * \defgroup xTaskGetTickCountFromISR xTaskGetTickCountFromISR + * \ingroup TaskUtils + */ +TickType_t xTaskGetTickCountFromISR( void ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
uint16_t uxTaskGetNumberOfTasks( void );
+ * + * @return The number of tasks that the real time kernel is currently managing. + * This includes all ready, blocked and suspended tasks. A task that + * has been deleted but not yet freed by the idle task will also be + * included in the count. + * + * \defgroup uxTaskGetNumberOfTasks uxTaskGetNumberOfTasks + * \ingroup TaskUtils + */ +UBaseType_t uxTaskGetNumberOfTasks( void ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
char *pcTaskGetName( TaskHandle_t xTaskToQuery );
+ * + * @return The text (human readable) name of the task referenced by the handle + * xTaskToQuery. A task can query its own name by either passing in its own + * handle, or by setting xTaskToQuery to NULL. + * + * \defgroup pcTaskGetName pcTaskGetName + * \ingroup TaskUtils + */ +char *pcTaskGetName( TaskHandle_t xTaskToQuery ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */ + +/** + * task. h + * 
TaskHandle_t xTaskGetHandle( const char *pcNameToQuery );
+ * + * NOTE: This function takes a relatively long time to complete and should be + * used sparingly. + * + * @return The handle of the task that has the human readable name pcNameToQuery. + * NULL is returned if no matching name is found. INCLUDE_xTaskGetHandle + * must be set to 1 in FreeRTOSConfig.h for pcTaskGetHandle() to be available. + * + * \defgroup pcTaskGetHandle pcTaskGetHandle + * \ingroup TaskUtils + */ +TaskHandle_t xTaskGetHandle( const char *pcNameToQuery ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */ + +/** + * task.h + * 
UBaseType_t uxTaskGetStackHighWaterMark( TaskHandle_t xTask );
+ * + * INCLUDE_uxTaskGetStackHighWaterMark must be set to 1 in FreeRTOSConfig.h for + * this function to be available. + * + * Returns the high water mark of the stack associated with xTask. That is, + * the minimum free stack space there has been (in words, so on a 32 bit machine + * a value of 1 means 4 bytes) since the task started. The smaller the returned + * number the closer the task has come to overflowing its stack. + * + * @param xTask Handle of the task associated with the stack to be checked. + * Set xTask to NULL to check the stack of the calling task. + * + * @return The smallest amount of free stack space there has been (in words, so + * actual spaces on the stack rather than bytes) since the task referenced by + * xTask was created. + */ +UBaseType_t uxTaskGetStackHighWaterMark( TaskHandle_t xTask ) PRIVILEGED_FUNCTION; + +/* When using trace macros it is sometimes necessary to include task.h before +FreeRTOS.h. When this is done TaskHookFunction_t will not yet have been defined, +so the following two prototypes will cause a compilation error. This can be +fixed by simply guarding against the inclusion of these two prototypes unless +they are explicitly required by the configUSE_APPLICATION_TASK_TAG configuration +constant. */ +#ifdef configUSE_APPLICATION_TASK_TAG + #if configUSE_APPLICATION_TASK_TAG == 1 + /** + * task.h + * 
void vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction );
+ * + * Sets pxHookFunction to be the task hook function used by the task xTask. + * Passing xTask as NULL has the effect of setting the calling tasks hook + * function. + */ + void vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction ) PRIVILEGED_FUNCTION; + + /** + * task.h + * 
void xTaskGetApplicationTaskTag( TaskHandle_t xTask );
+ * + * Returns the pxHookFunction value assigned to the task xTask. + */ + TaskHookFunction_t xTaskGetApplicationTaskTag( TaskHandle_t xTask ) PRIVILEGED_FUNCTION; + #endif /* configUSE_APPLICATION_TASK_TAG ==1 */ +#endif /* ifdef configUSE_APPLICATION_TASK_TAG */ + +#if( configNUM_THREAD_LOCAL_STORAGE_POINTERS > 0 ) + + /* Each task contains an array of pointers that is dimensioned by the + configNUM_THREAD_LOCAL_STORAGE_POINTERS setting in FreeRTOSConfig.h. The + kernel does not use the pointers itself, so the application writer can use + the pointers for any purpose they wish. The following two functions are + used to set and query a pointer respectively. */ + void vTaskSetThreadLocalStoragePointer( TaskHandle_t xTaskToSet, BaseType_t xIndex, void *pvValue ) PRIVILEGED_FUNCTION; + void *pvTaskGetThreadLocalStoragePointer( TaskHandle_t xTaskToQuery, BaseType_t xIndex ) PRIVILEGED_FUNCTION; + +#endif + +/** + * task.h + * 
BaseType_t xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter );
+ * + * Calls the hook function associated with xTask. Passing xTask as NULL has + * the effect of calling the Running tasks (the calling task) hook function. + * + * pvParameter is passed to the hook function for the task to interpret as it + * wants. The return value is the value returned by the task hook function + * registered by the user. + */ +BaseType_t xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter ) PRIVILEGED_FUNCTION; + +/** + * xTaskGetIdleTaskHandle() is only available if + * INCLUDE_xTaskGetIdleTaskHandle is set to 1 in FreeRTOSConfig.h. + * + * Simply returns the handle of the idle task. It is not valid to call + * xTaskGetIdleTaskHandle() before the scheduler has been started. + */ +TaskHandle_t xTaskGetIdleTaskHandle( void ) PRIVILEGED_FUNCTION; + +/** + * configUSE_TRACE_FACILITY must be defined as 1 in FreeRTOSConfig.h for + * uxTaskGetSystemState() to be available. + * + * uxTaskGetSystemState() populates an TaskStatus_t structure for each task in + * the system. TaskStatus_t structures contain, among other things, members + * for the task handle, task name, task priority, task state, and total amount + * of run time consumed by the task. See the TaskStatus_t structure + * definition in this file for the full member list. + * + * NOTE: This function is intended for debugging use only as its use results in + * the scheduler remaining suspended for an extended period. + * + * @param pxTaskStatusArray A pointer to an array of TaskStatus_t structures. + * The array must contain at least one TaskStatus_t structure for each task + * that is under the control of the RTOS. The number of tasks under the control + * of the RTOS can be determined using the uxTaskGetNumberOfTasks() API function. + * + * @param uxArraySize The size of the array pointed to by the pxTaskStatusArray + * parameter. The size is specified as the number of indexes in the array, or + * the number of TaskStatus_t structures contained in the array, not by the + * number of bytes in the array. + * + * @param pulTotalRunTime If configGENERATE_RUN_TIME_STATS is set to 1 in + * FreeRTOSConfig.h then *pulTotalRunTime is set by uxTaskGetSystemState() to the + * total run time (as defined by the run time stats clock, see + * http://www.freertos.org/rtos-run-time-stats.html) since the target booted. + * pulTotalRunTime can be set to NULL to omit the total run time information. + * + * @return The number of TaskStatus_t structures that were populated by + * uxTaskGetSystemState(). This should equal the number returned by the + * uxTaskGetNumberOfTasks() API function, but will be zero if the value passed + * in the uxArraySize parameter was too small. + * + * Example usage: + 
+    // This example demonstrates how a human readable table of run time stats
+	// information is generated from raw data provided by uxTaskGetSystemState().
+	// The human readable table is written to pcWriteBuffer
+	void vTaskGetRunTimeStats( char *pcWriteBuffer )
+	{
+	TaskStatus_t *pxTaskStatusArray;
+	volatile UBaseType_t uxArraySize, x;
+	uint32_t ulTotalRunTime, ulStatsAsPercentage;
+
+		// Make sure the write buffer does not contain a string.
+		*pcWriteBuffer = 0x00;
+
+		// Take a snapshot of the number of tasks in case it changes while this
+		// function is executing.
+		uxArraySize = uxTaskGetNumberOfTasks();
+
+		// Allocate a TaskStatus_t structure for each task.  An array could be
+		// allocated statically at compile time.
+		pxTaskStatusArray = pvPortMalloc( uxArraySize * sizeof( TaskStatus_t ) );
+
+		if( pxTaskStatusArray != NULL )
+		{
+			// Generate raw status information about each task.
+			uxArraySize = uxTaskGetSystemState( pxTaskStatusArray, uxArraySize, &ulTotalRunTime );
+
+			// For percentage calculations.
+			ulTotalRunTime /= 100UL;
+
+			// Avoid divide by zero errors.
+			if( ulTotalRunTime > 0 )
+			{
+				// For each populated position in the pxTaskStatusArray array,
+				// format the raw data as human readable ASCII data
+				for( x = 0; x < uxArraySize; x++ )
+				{
+					// What percentage of the total run time has the task used?
+					// This will always be rounded down to the nearest integer.
+					// ulTotalRunTimeDiv100 has already been divided by 100.
+					ulStatsAsPercentage = pxTaskStatusArray[ x ].ulRunTimeCounter / ulTotalRunTime;
+
+					if( ulStatsAsPercentage > 0UL )
+					{
+						sprintf( pcWriteBuffer, "%s\t\t%lu\t\t%lu%%\r\n", pxTaskStatusArray[ x ].pcTaskName, pxTaskStatusArray[ x ].ulRunTimeCounter, ulStatsAsPercentage );
+					}
+					else
+					{
+						// If the percentage is zero here then the task has
+						// consumed less than 1% of the total run time.
+						sprintf( pcWriteBuffer, "%s\t\t%lu\t\t<1%%\r\n", pxTaskStatusArray[ x ].pcTaskName, pxTaskStatusArray[ x ].ulRunTimeCounter );
+					}
+
+					pcWriteBuffer += strlen( ( char * ) pcWriteBuffer );
+				}
+			}
+
+			// The array is no longer needed, free the memory it consumes.
+			vPortFree( pxTaskStatusArray );
+		}
+	}
+
+ */ +UBaseType_t uxTaskGetSystemState( TaskStatus_t * const pxTaskStatusArray, const UBaseType_t uxArraySize, uint32_t * const pulTotalRunTime ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
void vTaskList( char *pcWriteBuffer );
+ * + * configUSE_TRACE_FACILITY and configUSE_STATS_FORMATTING_FUNCTIONS must + * both be defined as 1 for this function to be available. See the + * configuration section of the FreeRTOS.org website for more information. + * + * NOTE 1: This function will disable interrupts for its duration. It is + * not intended for normal application runtime use but as a debug aid. + * + * Lists all the current tasks, along with their current state and stack + * usage high water mark. + * + * Tasks are reported as blocked ('B'), ready ('R'), deleted ('D') or + * suspended ('S'). + * + * PLEASE NOTE: + * + * This function is provided for convenience only, and is used by many of the + * demo applications. Do not consider it to be part of the scheduler. + * + * vTaskList() calls uxTaskGetSystemState(), then formats part of the + * uxTaskGetSystemState() output into a human readable table that displays task + * names, states and stack usage. + * + * vTaskList() has a dependency on the sprintf() C library function that might + * bloat the code size, use a lot of stack, and provide different results on + * different platforms. An alternative, tiny, third party, and limited + * functionality implementation of sprintf() is provided in many of the + * FreeRTOS/Demo sub-directories in a file called printf-stdarg.c (note + * printf-stdarg.c does not provide a full snprintf() implementation!). + * + * It is recommended that production systems call uxTaskGetSystemState() + * directly to get access to raw stats data, rather than indirectly through a + * call to vTaskList(). + * + * @param pcWriteBuffer A buffer into which the above mentioned details + * will be written, in ASCII form. This buffer is assumed to be large + * enough to contain the generated report. Approximately 40 bytes per + * task should be sufficient. + * + * \defgroup vTaskList vTaskList + * \ingroup TaskUtils + */ +void vTaskList( char * pcWriteBuffer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */ + +/** + * task. h + * 
void vTaskGetRunTimeStats( char *pcWriteBuffer );
+ * + * configGENERATE_RUN_TIME_STATS and configUSE_STATS_FORMATTING_FUNCTIONS + * must both be defined as 1 for this function to be available. The application + * must also then provide definitions for + * portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() and portGET_RUN_TIME_COUNTER_VALUE() + * to configure a peripheral timer/counter and return the timers current count + * value respectively. The counter should be at least 10 times the frequency of + * the tick count. + * + * NOTE 1: This function will disable interrupts for its duration. It is + * not intended for normal application runtime use but as a debug aid. + * + * Setting configGENERATE_RUN_TIME_STATS to 1 will result in a total + * accumulated execution time being stored for each task. The resolution + * of the accumulated time value depends on the frequency of the timer + * configured by the portCONFIGURE_TIMER_FOR_RUN_TIME_STATS() macro. + * Calling vTaskGetRunTimeStats() writes the total execution time of each + * task into a buffer, both as an absolute count value and as a percentage + * of the total system execution time. + * + * NOTE 2: + * + * This function is provided for convenience only, and is used by many of the + * demo applications. Do not consider it to be part of the scheduler. + * + * vTaskGetRunTimeStats() calls uxTaskGetSystemState(), then formats part of the + * uxTaskGetSystemState() output into a human readable table that displays the + * amount of time each task has spent in the Running state in both absolute and + * percentage terms. + * + * vTaskGetRunTimeStats() has a dependency on the sprintf() C library function + * that might bloat the code size, use a lot of stack, and provide different + * results on different platforms. An alternative, tiny, third party, and + * limited functionality implementation of sprintf() is provided in many of the + * FreeRTOS/Demo sub-directories in a file called printf-stdarg.c (note + * printf-stdarg.c does not provide a full snprintf() implementation!). + * + * It is recommended that production systems call uxTaskGetSystemState() directly + * to get access to raw stats data, rather than indirectly through a call to + * vTaskGetRunTimeStats(). + * + * @param pcWriteBuffer A buffer into which the execution times will be + * written, in ASCII form. This buffer is assumed to be large enough to + * contain the generated report. Approximately 40 bytes per task should + * be sufficient. + * + * \defgroup vTaskGetRunTimeStats vTaskGetRunTimeStats + * \ingroup TaskUtils + */ +void vTaskGetRunTimeStats( char *pcWriteBuffer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */ + +/** + * task. h + * 
BaseType_t xTaskNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction );
+ * + * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this + * function to be available. + * + * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private + * "notification value", which is a 32-bit unsigned integer (uint32_t). + * + * Events can be sent to a task using an intermediary object. Examples of such + * objects are queues, semaphores, mutexes and event groups. Task notifications + * are a method of sending an event directly to a task without the need for such + * an intermediary object. + * + * A notification sent to a task can optionally perform an action, such as + * update, overwrite or increment the task's notification value. In that way + * task notifications can be used to send data to a task, or be used as light + * weight and fast binary or counting semaphores. + * + * A notification sent to a task will remain pending until it is cleared by the + * task calling xTaskNotifyWait() or ulTaskNotifyTake(). If the task was + * already in the Blocked state to wait for a notification when the notification + * arrives then the task will automatically be removed from the Blocked state + * (unblocked) and the notification cleared. + * + * A task can use xTaskNotifyWait() to [optionally] block to wait for a + * notification to be pending, or ulTaskNotifyTake() to [optionally] block + * to wait for its notification value to have a non-zero value. The task does + * not consume any CPU time while it is in the Blocked state. + * + * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details. + * + * @param xTaskToNotify The handle of the task being notified. The handle to a + * task can be returned from the xTaskCreate() API function used to create the + * task, and the handle of the currently running task can be obtained by calling + * xTaskGetCurrentTaskHandle(). + * + * @param ulValue Data that can be sent with the notification. How the data is + * used depends on the value of the eAction parameter. + * + * @param eAction Specifies how the notification updates the task's notification + * value, if at all. Valid values for eAction are as follows: + * + * eSetBits - + * The task's notification value is bitwise ORed with ulValue. xTaskNofify() + * always returns pdPASS in this case. + * + * eIncrement - + * The task's notification value is incremented. ulValue is not used and + * xTaskNotify() always returns pdPASS in this case. + * + * eSetValueWithOverwrite - + * The task's notification value is set to the value of ulValue, even if the + * task being notified had not yet processed the previous notification (the + * task already had a notification pending). xTaskNotify() always returns + * pdPASS in this case. + * + * eSetValueWithoutOverwrite - + * If the task being notified did not already have a notification pending then + * the task's notification value is set to ulValue and xTaskNotify() will + * return pdPASS. If the task being notified already had a notification + * pending then no action is performed and pdFAIL is returned. + * + * eNoAction - + * The task receives a notification without its notification value being + * updated. ulValue is not used and xTaskNotify() always returns pdPASS in + * this case. + * + * pulPreviousNotificationValue - + * Can be used to pass out the subject task's notification value before any + * bits are modified by the notify function. + * + * @return Dependent on the value of eAction. See the description of the + * eAction parameter. + * + * \defgroup xTaskNotify xTaskNotify + * \ingroup TaskNotifications + */ +BaseType_t xTaskGenericNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue ) PRIVILEGED_FUNCTION; +#define xTaskNotify( xTaskToNotify, ulValue, eAction ) xTaskGenericNotify( ( xTaskToNotify ), ( ulValue ), ( eAction ), NULL ) +#define xTaskNotifyAndQuery( xTaskToNotify, ulValue, eAction, pulPreviousNotifyValue ) xTaskGenericNotify( ( xTaskToNotify ), ( ulValue ), ( eAction ), ( pulPreviousNotifyValue ) ) + +/** + * task. h + * 
BaseType_t xTaskNotifyFromISR( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, BaseType_t *pxHigherPriorityTaskWoken );
+ * + * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this + * function to be available. + * + * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private + * "notification value", which is a 32-bit unsigned integer (uint32_t). + * + * A version of xTaskNotify() that can be used from an interrupt service routine + * (ISR). + * + * Events can be sent to a task using an intermediary object. Examples of such + * objects are queues, semaphores, mutexes and event groups. Task notifications + * are a method of sending an event directly to a task without the need for such + * an intermediary object. + * + * A notification sent to a task can optionally perform an action, such as + * update, overwrite or increment the task's notification value. In that way + * task notifications can be used to send data to a task, or be used as light + * weight and fast binary or counting semaphores. + * + * A notification sent to a task will remain pending until it is cleared by the + * task calling xTaskNotifyWait() or ulTaskNotifyTake(). If the task was + * already in the Blocked state to wait for a notification when the notification + * arrives then the task will automatically be removed from the Blocked state + * (unblocked) and the notification cleared. + * + * A task can use xTaskNotifyWait() to [optionally] block to wait for a + * notification to be pending, or ulTaskNotifyTake() to [optionally] block + * to wait for its notification value to have a non-zero value. The task does + * not consume any CPU time while it is in the Blocked state. + * + * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details. + * + * @param xTaskToNotify The handle of the task being notified. The handle to a + * task can be returned from the xTaskCreate() API function used to create the + * task, and the handle of the currently running task can be obtained by calling + * xTaskGetCurrentTaskHandle(). + * + * @param ulValue Data that can be sent with the notification. How the data is + * used depends on the value of the eAction parameter. + * + * @param eAction Specifies how the notification updates the task's notification + * value, if at all. Valid values for eAction are as follows: + * + * eSetBits - + * The task's notification value is bitwise ORed with ulValue. xTaskNofify() + * always returns pdPASS in this case. + * + * eIncrement - + * The task's notification value is incremented. ulValue is not used and + * xTaskNotify() always returns pdPASS in this case. + * + * eSetValueWithOverwrite - + * The task's notification value is set to the value of ulValue, even if the + * task being notified had not yet processed the previous notification (the + * task already had a notification pending). xTaskNotify() always returns + * pdPASS in this case. + * + * eSetValueWithoutOverwrite - + * If the task being notified did not already have a notification pending then + * the task's notification value is set to ulValue and xTaskNotify() will + * return pdPASS. If the task being notified already had a notification + * pending then no action is performed and pdFAIL is returned. + * + * eNoAction - + * The task receives a notification without its notification value being + * updated. ulValue is not used and xTaskNotify() always returns pdPASS in + * this case. + * + * @param pxHigherPriorityTaskWoken xTaskNotifyFromISR() will set + * *pxHigherPriorityTaskWoken to pdTRUE if sending the notification caused the + * task to which the notification was sent to leave the Blocked state, and the + * unblocked task has a priority higher than the currently running task. If + * xTaskNotifyFromISR() sets this value to pdTRUE then a context switch should + * be requested before the interrupt is exited. How a context switch is + * requested from an ISR is dependent on the port - see the documentation page + * for the port in use. + * + * @return Dependent on the value of eAction. See the description of the + * eAction parameter. + * + * \defgroup xTaskNotify xTaskNotify + * \ingroup TaskNotifications + */ +BaseType_t xTaskGenericNotifyFromISR( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION; +#define xTaskNotifyFromISR( xTaskToNotify, ulValue, eAction, pxHigherPriorityTaskWoken ) xTaskGenericNotifyFromISR( ( xTaskToNotify ), ( ulValue ), ( eAction ), NULL, ( pxHigherPriorityTaskWoken ) ) +#define xTaskNotifyAndQueryFromISR( xTaskToNotify, ulValue, eAction, pulPreviousNotificationValue, pxHigherPriorityTaskWoken ) xTaskGenericNotifyFromISR( ( xTaskToNotify ), ( ulValue ), ( eAction ), ( pulPreviousNotificationValue ), ( pxHigherPriorityTaskWoken ) ) + +/** + * task. h + * 
BaseType_t xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait );
+ * + * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this + * function to be available. + * + * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private + * "notification value", which is a 32-bit unsigned integer (uint32_t). + * + * Events can be sent to a task using an intermediary object. Examples of such + * objects are queues, semaphores, mutexes and event groups. Task notifications + * are a method of sending an event directly to a task without the need for such + * an intermediary object. + * + * A notification sent to a task can optionally perform an action, such as + * update, overwrite or increment the task's notification value. In that way + * task notifications can be used to send data to a task, or be used as light + * weight and fast binary or counting semaphores. + * + * A notification sent to a task will remain pending until it is cleared by the + * task calling xTaskNotifyWait() or ulTaskNotifyTake(). If the task was + * already in the Blocked state to wait for a notification when the notification + * arrives then the task will automatically be removed from the Blocked state + * (unblocked) and the notification cleared. + * + * A task can use xTaskNotifyWait() to [optionally] block to wait for a + * notification to be pending, or ulTaskNotifyTake() to [optionally] block + * to wait for its notification value to have a non-zero value. The task does + * not consume any CPU time while it is in the Blocked state. + * + * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details. + * + * @param ulBitsToClearOnEntry Bits that are set in ulBitsToClearOnEntry value + * will be cleared in the calling task's notification value before the task + * checks to see if any notifications are pending, and optionally blocks if no + * notifications are pending. Setting ulBitsToClearOnEntry to ULONG_MAX (if + * limits.h is included) or 0xffffffffUL (if limits.h is not included) will have + * the effect of resetting the task's notification value to 0. Setting + * ulBitsToClearOnEntry to 0 will leave the task's notification value unchanged. + * + * @param ulBitsToClearOnExit If a notification is pending or received before + * the calling task exits the xTaskNotifyWait() function then the task's + * notification value (see the xTaskNotify() API function) is passed out using + * the pulNotificationValue parameter. Then any bits that are set in + * ulBitsToClearOnExit will be cleared in the task's notification value (note + * *pulNotificationValue is set before any bits are cleared). Setting + * ulBitsToClearOnExit to ULONG_MAX (if limits.h is included) or 0xffffffffUL + * (if limits.h is not included) will have the effect of resetting the task's + * notification value to 0 before the function exits. Setting + * ulBitsToClearOnExit to 0 will leave the task's notification value unchanged + * when the function exits (in which case the value passed out in + * pulNotificationValue will match the task's notification value). + * + * @param pulNotificationValue Used to pass the task's notification value out + * of the function. Note the value passed out will not be effected by the + * clearing of any bits caused by ulBitsToClearOnExit being non-zero. + * + * @param xTicksToWait The maximum amount of time that the task should wait in + * the Blocked state for a notification to be received, should a notification + * not already be pending when xTaskNotifyWait() was called. The task + * will not consume any processing time while it is in the Blocked state. This + * is specified in kernel ticks, the macro pdMS_TO_TICSK( value_in_ms ) can be + * used to convert a time specified in milliseconds to a time specified in + * ticks. + * + * @return If a notification was received (including notifications that were + * already pending when xTaskNotifyWait was called) then pdPASS is + * returned. Otherwise pdFAIL is returned. + * + * \defgroup xTaskNotifyWait xTaskNotifyWait + * \ingroup TaskNotifications + */ +BaseType_t xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION; + +/** + * task. h + * 
BaseType_t xTaskNotifyGive( TaskHandle_t xTaskToNotify );
+ * + * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this macro + * to be available. + * + * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private + * "notification value", which is a 32-bit unsigned integer (uint32_t). + * + * Events can be sent to a task using an intermediary object. Examples of such + * objects are queues, semaphores, mutexes and event groups. Task notifications + * are a method of sending an event directly to a task without the need for such + * an intermediary object. + * + * A notification sent to a task can optionally perform an action, such as + * update, overwrite or increment the task's notification value. In that way + * task notifications can be used to send data to a task, or be used as light + * weight and fast binary or counting semaphores. + * + * xTaskNotifyGive() is a helper macro intended for use when task notifications + * are used as light weight and faster binary or counting semaphore equivalents. + * Actual FreeRTOS semaphores are given using the xSemaphoreGive() API function, + * the equivalent action that instead uses a task notification is + * xTaskNotifyGive(). + * + * When task notifications are being used as a binary or counting semaphore + * equivalent then the task being notified should wait for the notification + * using the ulTaskNotificationTake() API function rather than the + * xTaskNotifyWait() API function. + * + * See http://www.FreeRTOS.org/RTOS-task-notifications.html for more details. + * + * @param xTaskToNotify The handle of the task being notified. The handle to a + * task can be returned from the xTaskCreate() API function used to create the + * task, and the handle of the currently running task can be obtained by calling + * xTaskGetCurrentTaskHandle(). + * + * @return xTaskNotifyGive() is a macro that calls xTaskNotify() with the + * eAction parameter set to eIncrement - so pdPASS is always returned. + * + * \defgroup xTaskNotifyGive xTaskNotifyGive + * \ingroup TaskNotifications + */ +#define xTaskNotifyGive( xTaskToNotify ) xTaskGenericNotify( ( xTaskToNotify ), ( 0 ), eIncrement, NULL ) + +/** + * task. h + * 
void vTaskNotifyGiveFromISR( TaskHandle_t xTaskHandle, BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this macro
+ * to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * A version of xTaskNotifyGive() that can be called from an interrupt service
+ * routine (ISR).
+ *
+ * Events can be sent to a task using an intermediary object.  Examples of such
+ * objects are queues, semaphores, mutexes and event groups.  Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value.  In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * vTaskNotifyGiveFromISR() is intended for use when task notifications are
+ * used as light weight and faster binary or counting semaphore equivalents.
+ * Actual FreeRTOS semaphores are given from an ISR using the
+ * xSemaphoreGiveFromISR() API function, the equivalent action that instead uses
+ * a task notification is vTaskNotifyGiveFromISR().
+ *
+ * When task notifications are being used as a binary or counting semaphore
+ * equivalent then the task being notified should wait for the notification
+ * using the ulTaskNotificationTake() API function rather than the
+ * xTaskNotifyWait() API function.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for more details.
+ *
+ * @param xTaskToNotify The handle of the task being notified.  The handle to a
+ * task can be returned from the xTaskCreate() API function used to create the
+ * task, and the handle of the currently running task can be obtained by calling
+ * xTaskGetCurrentTaskHandle().
+ *
+ * @param pxHigherPriorityTaskWoken  vTaskNotifyGiveFromISR() will set
+ * *pxHigherPriorityTaskWoken to pdTRUE if sending the notification caused the
+ * task to which the notification was sent to leave the Blocked state, and the
+ * unblocked task has a priority higher than the currently running task.  If
+ * vTaskNotifyGiveFromISR() sets this value to pdTRUE then a context switch
+ * should be requested before the interrupt is exited.  How a context switch is
+ * requested from an ISR is dependent on the port - see the documentation page
+ * for the port in use.
+ *
+ * \defgroup xTaskNotifyWait xTaskNotifyWait
+ * \ingroup TaskNotifications
+ */
+void vTaskNotifyGiveFromISR( TaskHandle_t xTaskToNotify, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
uint32_t ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait );

+ *
+ * configUSE_TASK_NOTIFICATIONS must be undefined or defined as 1 for this
+ * function to be available.
+ *
+ * When configUSE_TASK_NOTIFICATIONS is set to one each task has its own private
+ * "notification value", which is a 32-bit unsigned integer (uint32_t).
+ *
+ * Events can be sent to a task using an intermediary object.  Examples of such
+ * objects are queues, semaphores, mutexes and event groups.  Task notifications
+ * are a method of sending an event directly to a task without the need for such
+ * an intermediary object.
+ *
+ * A notification sent to a task can optionally perform an action, such as
+ * update, overwrite or increment the task's notification value.  In that way
+ * task notifications can be used to send data to a task, or be used as light
+ * weight and fast binary or counting semaphores.
+ *
+ * ulTaskNotifyTake() is intended for use when a task notification is used as a
+ * faster and lighter weight binary or counting semaphore alternative.  Actual
+ * FreeRTOS semaphores are taken using the xSemaphoreTake() API function, the
+ * equivalent action that instead uses a task notification is
+ * ulTaskNotifyTake().
+ *
+ * When a task is using its notification value as a binary or counting semaphore
+ * other tasks should send notifications to it using the xTaskNotifyGive()
+ * macro, or xTaskNotify() function with the eAction parameter set to
+ * eIncrement.
+ *
+ * ulTaskNotifyTake() can either clear the task's notification value to
+ * zero on exit, in which case the notification value acts like a binary
+ * semaphore, or decrement the task's notification value on exit, in which case
+ * the notification value acts like a counting semaphore.
+ *
+ * A task can use ulTaskNotifyTake() to [optionally] block to wait for a
+ * the task's notification value to be non-zero.  The task does not consume any
+ * CPU time while it is in the Blocked state.
+ *
+ * Where as xTaskNotifyWait() will return when a notification is pending,
+ * ulTaskNotifyTake() will return when the task's notification value is
+ * not zero.
+ *
+ * See http://www.FreeRTOS.org/RTOS-task-notifications.html for details.
+ *
+ * @param xClearCountOnExit if xClearCountOnExit is pdFALSE then the task's
+ * notification value is decremented when the function exits.  In this way the
+ * notification value acts like a counting semaphore.  If xClearCountOnExit is
+ * not pdFALSE then the task's notification value is cleared to zero when the
+ * function exits.  In this way the notification value acts like a binary
+ * semaphore.
+ *
+ * @param xTicksToWait The maximum amount of time that the task should wait in
+ * the Blocked state for the task's notification value to be greater than zero,
+ * should the count not already be greater than zero when
+ * ulTaskNotifyTake() was called.  The task will not consume any processing
+ * time while it is in the Blocked state.  This is specified in kernel ticks,
+ * the macro pdMS_TO_TICSK( value_in_ms ) can be used to convert a time
+ * specified in milliseconds to a time specified in ticks.
+ *
+ * @return The task's notification count before it is either cleared to zero or
+ * decremented (see the xClearCountOnExit parameter).
+ *
+ * \defgroup ulTaskNotifyTake ulTaskNotifyTake
+ * \ingroup TaskNotifications
+ */
+uint32_t ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * task. h
+ * 
BaseType_t xTaskNotifyStateClear( TaskHandle_t xTask );

+ *
+ * If the notification state of the task referenced by the handle xTask is
+ * eNotified, then set the task's notification state to eNotWaitingNotification.
+ * The task's notification value is not altered.  Set xTask to NULL to clear the
+ * notification state of the calling task.
+ *
+ * @return pdTRUE if the task's notification state was set to
+ * eNotWaitingNotification, otherwise pdFALSE.
+ * \defgroup xTaskNotifyStateClear xTaskNotifyStateClear
+ * \ingroup TaskNotifications
+ */
+BaseType_t xTaskNotifyStateClear( TaskHandle_t xTask );
+
+/*-----------------------------------------------------------
+ * SCHEDULER INTERNALS AVAILABLE FOR PORTING PURPOSES
+ *----------------------------------------------------------*/
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE.  IT IS ONLY
+ * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS
+ * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * Called from the real time kernel tick (either preemptive or cooperative),
+ * this increments the tick count and checks if any tasks that are blocked
+ * for a finite period required removing from a blocked list and placing on
+ * a ready list.  If a non-zero value is returned then a context switch is
+ * required because either:
+ *   + A task was removed from a blocked list because its timeout had expired,
+ *     or
+ *   + Time slicing is in use and there is a task of equal priority to the
+ *     currently running task.
+ */
+BaseType_t xTaskIncrementTick( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE.  IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.
+ *
+ * Removes the calling task from the ready list and places it both
+ * on the list of tasks waiting for a particular event, and the
+ * list of delayed tasks.  The task will be removed from both lists
+ * and replaced on the ready list should either the event occur (and
+ * there be no higher priority tasks waiting on the same event) or
+ * the delay period expires.
+ *
+ * The 'unordered' version replaces the event list item value with the
+ * xItemValue value, and inserts the list item at the end of the list.
+ *
+ * The 'ordered' version uses the existing event list item value (which is the
+ * owning tasks priority) to insert the list item into the event list is task
+ * priority order.
+ *
+ * @param pxEventList The list containing tasks that are blocked waiting
+ * for the event to occur.
+ *
+ * @param xItemValue The item value to use for the event list item when the
+ * event list is not ordered by task priority.
+ *
+ * @param xTicksToWait The maximum amount of time that the task should wait
+ * for the event to occur.  This is specified in kernel ticks,the constant
+ * portTICK_PERIOD_MS can be used to convert kernel ticks into a real time
+ * period.
+ */
+void vTaskPlaceOnEventList( List_t * const pxEventList, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+void vTaskPlaceOnUnorderedEventList( List_t * pxEventList, const TickType_t xItemValue, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE.  IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.
+ *
+ * This function performs nearly the same function as vTaskPlaceOnEventList().
+ * The difference being that this function does not permit tasks to block
+ * indefinitely, whereas vTaskPlaceOnEventList() does.
+ *
+ */
+void vTaskPlaceOnEventListRestricted( List_t * const pxEventList, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE.  IT IS AN
+ * INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED.
+ *
+ * Removes a task from both the specified event list and the list of blocked
+ * tasks, and places it on a ready queue.
+ *
+ * xTaskRemoveFromEventList()/xTaskRemoveFromUnorderedEventList() will be called
+ * if either an event occurs to unblock a task, or the block timeout period
+ * expires.
+ *
+ * xTaskRemoveFromEventList() is used when the event list is in task priority
+ * order.  It removes the list item from the head of the event list as that will
+ * have the highest priority owning task of all the tasks on the event list.
+ * xTaskRemoveFromUnorderedEventList() is used when the event list is not
+ * ordered and the event list items hold something other than the owning tasks
+ * priority.  In this case the event list item value is updated to the value
+ * passed in the xItemValue parameter.
+ *
+ * @return pdTRUE if the task being removed has a higher priority than the task
+ * making the call, otherwise pdFALSE.
+ */
+BaseType_t xTaskRemoveFromEventList( const List_t * const pxEventList ) PRIVILEGED_FUNCTION;
+BaseType_t xTaskRemoveFromUnorderedEventList( ListItem_t * pxEventListItem, const TickType_t xItemValue ) PRIVILEGED_FUNCTION;
+
+/*
+ * THIS FUNCTION MUST NOT BE USED FROM APPLICATION CODE.  IT IS ONLY
+ * INTENDED FOR USE WHEN IMPLEMENTING A PORT OF THE SCHEDULER AND IS
+ * AN INTERFACE WHICH IS FOR THE EXCLUSIVE USE OF THE SCHEDULER.
+ *
+ * Sets the pointer to the current TCB to the TCB of the highest priority task
+ * that is ready to run.
+ */
+void vTaskSwitchContext( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * THESE FUNCTIONS MUST NOT BE USED FROM APPLICATION CODE.  THEY ARE USED BY
+ * THE EVENT BITS MODULE.
+ */
+TickType_t uxTaskResetEventItemValue( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Return the handle of the calling task.
+ */
+TaskHandle_t xTaskGetCurrentTaskHandle( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Capture the current time status for future reference.
+ */
+void vTaskSetTimeOutState( TimeOut_t * const pxTimeOut ) PRIVILEGED_FUNCTION;
+
+/*
+ * Compare the time status now with that previously captured to see if the
+ * timeout has expired.
+ */
+BaseType_t xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut, TickType_t * const pxTicksToWait ) PRIVILEGED_FUNCTION;
+
+/*
+ * Shortcut used by the queue implementation to prevent unnecessary call to
+ * taskYIELD();
+ */
+void vTaskMissedYield( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Returns the scheduler state as taskSCHEDULER_RUNNING,
+ * taskSCHEDULER_NOT_STARTED or taskSCHEDULER_SUSPENDED.
+ */
+BaseType_t xTaskGetSchedulerState( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Raises the priority of the mutex holder to that of the calling task should
+ * the mutex holder have a priority less than the calling task.
+ */
+void vTaskPriorityInherit( TaskHandle_t const pxMutexHolder ) PRIVILEGED_FUNCTION;
+
+/*
+ * Set the priority of a task back to its proper priority in the case that it
+ * inherited a higher priority while it was holding a semaphore.
+ */
+BaseType_t xTaskPriorityDisinherit( TaskHandle_t const pxMutexHolder ) PRIVILEGED_FUNCTION;
+
+/*
+ * Get the uxTCBNumber assigned to the task referenced by the xTask parameter.
+ */
+UBaseType_t uxTaskGetTaskNumber( TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+
+/*
+ * Set the uxTaskNumber of the task referenced by the xTask parameter to
+ * uxHandle.
+ */
+void vTaskSetTaskNumber( TaskHandle_t xTask, const UBaseType_t uxHandle ) PRIVILEGED_FUNCTION;
+
+/*
+ * Only available when configUSE_TICKLESS_IDLE is set to 1.
+ * If tickless mode is being used, or a low power mode is implemented, then
+ * the tick interrupt will not execute during idle periods.  When this is the
+ * case, the tick count value maintained by the scheduler needs to be kept up
+ * to date with the actual execution time by being skipped forward by a time
+ * equal to the idle period.
+ */
+void vTaskStepTick( const TickType_t xTicksToJump ) PRIVILEGED_FUNCTION;
+
+/*
+ * Only avilable when configUSE_TICKLESS_IDLE is set to 1.
+ * Provided for use within portSUPPRESS_TICKS_AND_SLEEP() to allow the port
+ * specific sleep function to determine if it is ok to proceed with the sleep,
+ * and if it is ok to proceed, if it is ok to sleep indefinitely.
+ *
+ * This function is necessary because portSUPPRESS_TICKS_AND_SLEEP() is only
+ * called with the scheduler suspended, not from within a critical section.  It
+ * is therefore possible for an interrupt to request a context switch between
+ * portSUPPRESS_TICKS_AND_SLEEP() and the low power mode actually being
+ * entered.  eTaskConfirmSleepModeStatus() should be called from a short
+ * critical section between the timer being stopped and the sleep mode being
+ * entered to ensure it is ok to proceed into the sleep mode.
+ */
+eSleepModeStatus eTaskConfirmSleepModeStatus( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * For internal use only.  Increment the mutex held count when a mutex is
+ * taken and return the handle of the task that has taken the mutex.
+ */
+void *pvTaskIncrementMutexHeldCount( void ) PRIVILEGED_FUNCTION;
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* INC_TASK_H */
+
+
+
diff --git a/Program/XLLC/FreeRTOS/include/timers.h b/Program/XLLC/FreeRTOS/include/timers.h
new file mode 100644
index 0000000000000000000000000000000000000000..fda71ca0d31f5a96cada196be22818d930414109
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/include/timers.h
@@ -0,0 +1,1314 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+
+#ifndef TIMERS_H
+#define TIMERS_H
+
+#ifndef INC_FREERTOS_H
+	#error "include FreeRTOS.h must appear in source files before include timers.h"
+#endif
+
+/*lint -e537 This headers are only multiply included if the application code
+happens to also be including task.h. */
+#include "task.h"
+/*lint +e537 */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * MACROS AND DEFINITIONS
+ *----------------------------------------------------------*/
+
+/* IDs for commands that can be sent/received on the timer queue.  These are to
+be used solely through the macros that make up the public software timer API,
+as defined below.  The commands that are sent from interrupts must use the
+highest numbers as tmrFIRST_FROM_ISR_COMMAND is used to determine if the task
+or interrupt version of the queue send function should be used. */
+#define tmrCOMMAND_EXECUTE_CALLBACK_FROM_ISR 	( ( BaseType_t ) -2 )
+#define tmrCOMMAND_EXECUTE_CALLBACK				( ( BaseType_t ) -1 )
+#define tmrCOMMAND_START_DONT_TRACE				( ( BaseType_t ) 0 )
+#define tmrCOMMAND_START					    ( ( BaseType_t ) 1 )
+#define tmrCOMMAND_RESET						( ( BaseType_t ) 2 )
+#define tmrCOMMAND_STOP							( ( BaseType_t ) 3 )
+#define tmrCOMMAND_CHANGE_PERIOD				( ( BaseType_t ) 4 )
+#define tmrCOMMAND_DELETE						( ( BaseType_t ) 5 )
+
+#define tmrFIRST_FROM_ISR_COMMAND				( ( BaseType_t ) 6 )
+#define tmrCOMMAND_START_FROM_ISR				( ( BaseType_t ) 6 )
+#define tmrCOMMAND_RESET_FROM_ISR				( ( BaseType_t ) 7 )
+#define tmrCOMMAND_STOP_FROM_ISR				( ( BaseType_t ) 8 )
+#define tmrCOMMAND_CHANGE_PERIOD_FROM_ISR		( ( BaseType_t ) 9 )
+
+
+/**
+ * Type by which software timers are referenced.  For example, a call to
+ * xTimerCreate() returns an TimerHandle_t variable that can then be used to
+ * reference the subject timer in calls to other software timer API functions
+ * (for example, xTimerStart(), xTimerReset(), etc.).
+ */
+typedef void * TimerHandle_t;
+
+/*
+ * Defines the prototype to which timer callback functions must conform.
+ */
+typedef void (*TimerCallbackFunction_t)( TimerHandle_t xTimer );
+
+/*
+ * Defines the prototype to which functions used with the
+ * xTimerPendFunctionCallFromISR() function must conform.
+ */
+typedef void (*PendedFunction_t)( void *, uint32_t );
+
+/**
+ * TimerHandle_t xTimerCreate( 	const char * const pcTimerName,
+ * 								TickType_t xTimerPeriodInTicks,
+ * 								UBaseType_t uxAutoReload,
+ * 								void * pvTimerID,
+ * 								TimerCallbackFunction_t pxCallbackFunction );
+ *
+ * Creates a new software timer instance, and returns a handle by which the
+ * created software timer can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, software timers use a block
+ * of memory, in which the timer data structure is stored.  If a software timer
+ * is created using xTimerCreate() then the required memory is automatically
+ * dynamically allocated inside the xTimerCreate() function.  (see
+ * http://www.freertos.org/a00111.html).  If a software timer is created using
+ * xTimerCreateStatic() then the application writer must provide the memory that
+ * will get used by the software timer.  xTimerCreateStatic() therefore allows a
+ * software timer to be created without using any dynamic memory allocation.
+ *
+ * Timers are created in the dormant state.  The xTimerStart(), xTimerReset(),
+ * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and
+ * xTimerChangePeriodFromISR() API functions can all be used to transition a
+ * timer into the active state.
+ *
+ * @param pcTimerName A text name that is assigned to the timer.  This is done
+ * purely to assist debugging.  The kernel itself only ever references a timer
+ * by its handle, and never by its name.
+ *
+ * @param xTimerPeriodInTicks The timer period.  The time is defined in tick
+ * periods so the constant portTICK_PERIOD_MS can be used to convert a time that
+ * has been specified in milliseconds.  For example, if the timer must expire
+ * after 100 ticks, then xTimerPeriodInTicks should be set to 100.
+ * Alternatively, if the timer must expire after 500ms, then xPeriod can be set
+ * to ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than or
+ * equal to 1000.
+ *
+ * @param uxAutoReload If uxAutoReload is set to pdTRUE then the timer will
+ * expire repeatedly with a frequency set by the xTimerPeriodInTicks parameter.
+ * If uxAutoReload is set to pdFALSE then the timer will be a one-shot timer and
+ * enter the dormant state after it expires.
+ *
+ * @param pvTimerID An identifier that is assigned to the timer being created.
+ * Typically this would be used in the timer callback function to identify which
+ * timer expired when the same callback function is assigned to more than one
+ * timer.
+ *
+ * @param pxCallbackFunction The function to call when the timer expires.
+ * Callback functions must have the prototype defined by TimerCallbackFunction_t,
+ * which is	"void vCallbackFunction( TimerHandle_t xTimer );".
+ *
+ * @return If the timer is successfully created then a handle to the newly
+ * created timer is returned.  If the timer cannot be created (because either
+ * there is insufficient FreeRTOS heap remaining to allocate the timer
+ * structures, or the timer period was set to 0) then NULL is returned.
+ *
+ * Example usage:
+ * @verbatim
+ * #define NUM_TIMERS 5
+ *
+ * // An array to hold handles to the created timers.
+ * TimerHandle_t xTimers[ NUM_TIMERS ];
+ *
+ * // An array to hold a count of the number of times each timer expires.
+ * int32_t lExpireCounters[ NUM_TIMERS ] = { 0 };
+ *
+ * // Define a callback function that will be used by multiple timer instances.
+ * // The callback function does nothing but count the number of times the
+ * // associated timer expires, and stop the timer once the timer has expired
+ * // 10 times.
+ * void vTimerCallback( TimerHandle_t pxTimer )
+ * {
+ * int32_t lArrayIndex;
+ * const int32_t xMaxExpiryCountBeforeStopping = 10;
+ *
+ * 	   // Optionally do something if the pxTimer parameter is NULL.
+ * 	   configASSERT( pxTimer );
+ *
+ *     // Which timer expired?
+ *     lArrayIndex = ( int32_t ) pvTimerGetTimerID( pxTimer );
+ *
+ *     // Increment the number of times that pxTimer has expired.
+ *     lExpireCounters[ lArrayIndex ] += 1;
+ *
+ *     // If the timer has expired 10 times then stop it from running.
+ *     if( lExpireCounters[ lArrayIndex ] == xMaxExpiryCountBeforeStopping )
+ *     {
+ *         // Do not use a block time if calling a timer API function from a
+ *         // timer callback function, as doing so could cause a deadlock!
+ *         xTimerStop( pxTimer, 0 );
+ *     }
+ * }
+ *
+ * void main( void )
+ * {
+ * int32_t x;
+ *
+ *     // Create then start some timers.  Starting the timers before the scheduler
+ *     // has been started means the timers will start running immediately that
+ *     // the scheduler starts.
+ *     for( x = 0; x < NUM_TIMERS; x++ )
+ *     {
+ *         xTimers[ x ] = xTimerCreate(    "Timer",       // Just a text name, not used by the kernel.
+ *                                         ( 100 * x ),   // The timer period in ticks.
+ *                                         pdTRUE,        // The timers will auto-reload themselves when they expire.
+ *                                         ( void * ) x,  // Assign each timer a unique id equal to its array index.
+ *                                         vTimerCallback // Each timer calls the same callback when it expires.
+ *                                     );
+ *
+ *         if( xTimers[ x ] == NULL )
+ *         {
+ *             // The timer was not created.
+ *         }
+ *         else
+ *         {
+ *             // Start the timer.  No block time is specified, and even if one was
+ *             // it would be ignored because the scheduler has not yet been
+ *             // started.
+ *             if( xTimerStart( xTimers[ x ], 0 ) != pdPASS )
+ *             {
+ *                 // The timer could not be set into the Active state.
+ *             }
+ *         }
+ *     }
+ *
+ *     // ...
+ *     // Create tasks here.
+ *     // ...
+ *
+ *     // Starting the scheduler will start the timers running as they have already
+ *     // been set into the active state.
+ *     vTaskStartScheduler();
+ *
+ *     // Should not reach here.
+ *     for( ;; );
+ * }
+ * @endverbatim
+ */
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+	TimerHandle_t xTimerCreate(	const char * const pcTimerName,
+								const TickType_t xTimerPeriodInTicks,
+								const UBaseType_t uxAutoReload,
+								void * const pvTimerID,
+								TimerCallbackFunction_t pxCallbackFunction ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+#endif
+
+/**
+ * TimerHandle_t xTimerCreateStatic(const char * const pcTimerName,
+ * 									TickType_t xTimerPeriodInTicks,
+ * 									UBaseType_t uxAutoReload,
+ * 									void * pvTimerID,
+ * 									TimerCallbackFunction_t pxCallbackFunction,
+ *									StaticTimer_t *pxTimerBuffer );
+ *
+ * Creates a new software timer instance, and returns a handle by which the
+ * created software timer can be referenced.
+ *
+ * Internally, within the FreeRTOS implementation, software timers use a block
+ * of memory, in which the timer data structure is stored.  If a software timer
+ * is created using xTimerCreate() then the required memory is automatically
+ * dynamically allocated inside the xTimerCreate() function.  (see
+ * http://www.freertos.org/a00111.html).  If a software timer is created using
+ * xTimerCreateStatic() then the application writer must provide the memory that
+ * will get used by the software timer.  xTimerCreateStatic() therefore allows a
+ * software timer to be created without using any dynamic memory allocation.
+ *
+ * Timers are created in the dormant state.  The xTimerStart(), xTimerReset(),
+ * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and
+ * xTimerChangePeriodFromISR() API functions can all be used to transition a
+ * timer into the active state.
+ *
+ * @param pcTimerName A text name that is assigned to the timer.  This is done
+ * purely to assist debugging.  The kernel itself only ever references a timer
+ * by its handle, and never by its name.
+ *
+ * @param xTimerPeriodInTicks The timer period.  The time is defined in tick
+ * periods so the constant portTICK_PERIOD_MS can be used to convert a time that
+ * has been specified in milliseconds.  For example, if the timer must expire
+ * after 100 ticks, then xTimerPeriodInTicks should be set to 100.
+ * Alternatively, if the timer must expire after 500ms, then xPeriod can be set
+ * to ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than or
+ * equal to 1000.
+ *
+ * @param uxAutoReload If uxAutoReload is set to pdTRUE then the timer will
+ * expire repeatedly with a frequency set by the xTimerPeriodInTicks parameter.
+ * If uxAutoReload is set to pdFALSE then the timer will be a one-shot timer and
+ * enter the dormant state after it expires.
+ *
+ * @param pvTimerID An identifier that is assigned to the timer being created.
+ * Typically this would be used in the timer callback function to identify which
+ * timer expired when the same callback function is assigned to more than one
+ * timer.
+ *
+ * @param pxCallbackFunction The function to call when the timer expires.
+ * Callback functions must have the prototype defined by TimerCallbackFunction_t,
+ * which is "void vCallbackFunction( TimerHandle_t xTimer );".
+ *
+ * @param pxTimerBuffer Must point to a variable of type StaticTimer_t, which
+ * will be then be used to hold the software timer's data structures, removing
+ * the need for the memory to be allocated dynamically.
+ *
+ * @return If the timer is created then a handle to the created timer is
+ * returned.  If pxTimerBuffer was NULL then NULL is returned.
+ *
+ * Example usage:
+ * @verbatim
+ *
+ * // The buffer used to hold the software timer's data structure.
+ * static StaticTimer_t xTimerBuffer;
+ *
+ * // A variable that will be incremented by the software timer's callback
+ * // function.
+ * UBaseType_t uxVariableToIncrement = 0;
+ *
+ * // A software timer callback function that increments a variable passed to
+ * // it when the software timer was created.  After the 5th increment the
+ * // callback function stops the software timer.
+ * static void prvTimerCallback( TimerHandle_t xExpiredTimer )
+ * {
+ * UBaseType_t *puxVariableToIncrement;
+ * BaseType_t xReturned;
+ *
+ *     // Obtain the address of the variable to increment from the timer ID.
+ *     puxVariableToIncrement = ( UBaseType_t * ) pvTimerGetTimerID( xExpiredTimer );
+ *
+ *     // Increment the variable to show the timer callback has executed.
+ *     ( *puxVariableToIncrement )++;
+ *
+ *     // If this callback has executed the required number of times, stop the
+ *     // timer.
+ *     if( *puxVariableToIncrement == 5 )
+ *     {
+ *         // This is called from a timer callback so must not block.
+ *         xTimerStop( xExpiredTimer, staticDONT_BLOCK );
+ *     }
+ * }
+ *
+ *
+ * void main( void )
+ * {
+ *     // Create the software time.  xTimerCreateStatic() has an extra parameter
+ *     // than the normal xTimerCreate() API function.  The parameter is a pointer
+ *     // to the StaticTimer_t structure that will hold the software timer
+ *     // structure.  If the parameter is passed as NULL then the structure will be
+ *     // allocated dynamically, just as if xTimerCreate() had been called.
+ *     xTimer = xTimerCreateStatic( "T1",             // Text name for the task.  Helps debugging only.  Not used by FreeRTOS.
+ *                                  xTimerPeriod,     // The period of the timer in ticks.
+ *                                  pdTRUE,           // This is an auto-reload timer.
+ *                                  ( void * ) &uxVariableToIncrement,    // A variable incremented by the software timer's callback function
+ *                                  prvTimerCallback, // The function to execute when the timer expires.
+ *                                  &xTimerBuffer );  // The buffer that will hold the software timer structure.
+ *
+ *     // The scheduler has not started yet so a block time is not used.
+ *     xReturned = xTimerStart( xTimer, 0 );
+ *
+ *     // ...
+ *     // Create tasks here.
+ *     // ...
+ *
+ *     // Starting the scheduler will start the timers running as they have already
+ *     // been set into the active state.
+ *     vTaskStartScheduler();
+ *
+ *     // Should not reach here.
+ *     for( ;; );
+ * }
+ * @endverbatim
+ */
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+	TimerHandle_t xTimerCreateStatic(	const char * const pcTimerName,
+										const TickType_t xTimerPeriodInTicks,
+										const UBaseType_t uxAutoReload,
+										void * const pvTimerID,
+										TimerCallbackFunction_t pxCallbackFunction,
+										StaticTimer_t *pxTimerBuffer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+/**
+ * void *pvTimerGetTimerID( TimerHandle_t xTimer );
+ *
+ * Returns the ID assigned to the timer.
+ *
+ * IDs are assigned to timers using the pvTimerID parameter of the call to
+ * xTimerCreated() that was used to create the timer, and by calling the
+ * vTimerSetTimerID() API function.
+ *
+ * If the same callback function is assigned to multiple timers then the timer
+ * ID can be used as time specific (timer local) storage.
+ *
+ * @param xTimer The timer being queried.
+ *
+ * @return The ID assigned to the timer being queried.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ */
+void *pvTimerGetTimerID( const TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/**
+ * void vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID );
+ *
+ * Sets the ID assigned to the timer.
+ *
+ * IDs are assigned to timers using the pvTimerID parameter of the call to
+ * xTimerCreated() that was used to create the timer.
+ *
+ * If the same callback function is assigned to multiple timers then the timer
+ * ID can be used as time specific (timer local) storage.
+ *
+ * @param xTimer The timer being updated.
+ *
+ * @param pvNewID The ID to assign to the timer.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ */
+void vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID ) PRIVILEGED_FUNCTION;
+
+/**
+ * BaseType_t xTimerIsTimerActive( TimerHandle_t xTimer );
+ *
+ * Queries a timer to see if it is active or dormant.
+ *
+ * A timer will be dormant if:
+ *     1) It has been created but not started, or
+ *     2) It is an expired one-shot timer that has not been restarted.
+ *
+ * Timers are created in the dormant state.  The xTimerStart(), xTimerReset(),
+ * xTimerStartFromISR(), xTimerResetFromISR(), xTimerChangePeriod() and
+ * xTimerChangePeriodFromISR() API functions can all be used to transition a timer into the
+ * active state.
+ *
+ * @param xTimer The timer being queried.
+ *
+ * @return pdFALSE will be returned if the timer is dormant.  A value other than
+ * pdFALSE will be returned if the timer is active.
+ *
+ * Example usage:
+ * @verbatim
+ * // This function assumes xTimer has already been created.
+ * void vAFunction( TimerHandle_t xTimer )
+ * {
+ *     if( xTimerIsTimerActive( xTimer ) != pdFALSE ) // or more simply and equivalently "if( xTimerIsTimerActive( xTimer ) )"
+ *     {
+ *         // xTimer is active, do something.
+ *     }
+ *     else
+ *     {
+ *         // xTimer is not active, do something else.
+ *     }
+ * }
+ * @endverbatim
+ */
+BaseType_t xTimerIsTimerActive( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/**
+ * TaskHandle_t xTimerGetTimerDaemonTaskHandle( void );
+ *
+ * Simply returns the handle of the timer service/daemon task.  It it not valid
+ * to call xTimerGetTimerDaemonTaskHandle() before the scheduler has been started.
+ */
+TaskHandle_t xTimerGetTimerDaemonTaskHandle( void ) PRIVILEGED_FUNCTION;
+
+/**
+ * BaseType_t xTimerStart( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task.  Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue.  The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code.  The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerStart() starts a timer that was previously created using the
+ * xTimerCreate() API function.  If the timer had already been started and was
+ * already in the active state, then xTimerStart() has equivalent functionality
+ * to the xTimerReset() API function.
+ *
+ * Starting a timer ensures the timer is in the active state.  If the timer
+ * is not stopped, deleted, or reset in the mean time, the callback function
+ * associated with the timer will get called 'n' ticks after xTimerStart() was
+ * called, where 'n' is the timers defined period.
+ *
+ * It is valid to call xTimerStart() before the scheduler has been started, but
+ * when this is done the timer will not actually start until the scheduler is
+ * started, and the timers expiry time will be relative to when the scheduler is
+ * started, not relative to when xTimerStart() was called.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerStart()
+ * to be available.
+ *
+ * @param xTimer The handle of the timer being started/restarted.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the start command to be successfully
+ * sent to the timer command queue, should the queue already be full when
+ * xTimerStart() was called.  xTicksToWait is ignored if xTimerStart() is called
+ * before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the start command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed.  pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system, although the
+ * timers expiry time is relative to when xTimerStart() is actually called.  The
+ * timer service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ *
+ */
+#define xTimerStart( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START, ( xTaskGetTickCount() ), NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerStop( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task.  Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue.  The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code.  The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerStop() stops a timer that was previously started using either of the
+ * The xTimerStart(), xTimerReset(), xTimerStartFromISR(), xTimerResetFromISR(),
+ * xTimerChangePeriod() or xTimerChangePeriodFromISR() API functions.
+ *
+ * Stopping a timer ensures the timer is not in the active state.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerStop()
+ * to be available.
+ *
+ * @param xTimer The handle of the timer being stopped.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the stop command to be successfully
+ * sent to the timer command queue, should the queue already be full when
+ * xTimerStop() was called.  xTicksToWait is ignored if xTimerStop() is called
+ * before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the stop command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed.  pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system.  The timer
+ * service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ *
+ * See the xTimerCreate() API function example usage scenario.
+ *
+ */
+#define xTimerStop( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_STOP, 0U, NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerChangePeriod( 	TimerHandle_t xTimer,
+ *										TickType_t xNewPeriod,
+ *										TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task.  Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue.  The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code.  The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerChangePeriod() changes the period of a timer that was previously
+ * created using the xTimerCreate() API function.
+ *
+ * xTimerChangePeriod() can be called to change the period of an active or
+ * dormant state timer.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for
+ * xTimerChangePeriod() to be available.
+ *
+ * @param xTimer The handle of the timer that is having its period changed.
+ *
+ * @param xNewPeriod The new period for xTimer. Timer periods are specified in
+ * tick periods, so the constant portTICK_PERIOD_MS can be used to convert a time
+ * that has been specified in milliseconds.  For example, if the timer must
+ * expire after 100 ticks, then xNewPeriod should be set to 100.  Alternatively,
+ * if the timer must expire after 500ms, then xNewPeriod can be set to
+ * ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than
+ * or equal to 1000.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the change period command to be
+ * successfully sent to the timer command queue, should the queue already be
+ * full when xTimerChangePeriod() was called.  xTicksToWait is ignored if
+ * xTimerChangePeriod() is called before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the change period command could not be
+ * sent to the timer command queue even after xTicksToWait ticks had passed.
+ * pdPASS will be returned if the command was successfully sent to the timer
+ * command queue.  When the command is actually processed will depend on the
+ * priority of the timer service/daemon task relative to other tasks in the
+ * system.  The timer service/daemon task priority is set by the
+ * configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This function assumes xTimer has already been created.  If the timer
+ * // referenced by xTimer is already active when it is called, then the timer
+ * // is deleted.  If the timer referenced by xTimer is not active when it is
+ * // called, then the period of the timer is set to 500ms and the timer is
+ * // started.
+ * void vAFunction( TimerHandle_t xTimer )
+ * {
+ *     if( xTimerIsTimerActive( xTimer ) != pdFALSE ) // or more simply and equivalently "if( xTimerIsTimerActive( xTimer ) )"
+ *     {
+ *         // xTimer is already active - delete it.
+ *         xTimerDelete( xTimer );
+ *     }
+ *     else
+ *     {
+ *         // xTimer is not active, change its period to 500ms.  This will also
+ *         // cause the timer to start.  Block for a maximum of 100 ticks if the
+ *         // change period command cannot immediately be sent to the timer
+ *         // command queue.
+ *         if( xTimerChangePeriod( xTimer, 500 / portTICK_PERIOD_MS, 100 ) == pdPASS )
+ *         {
+ *             // The command was successfully sent.
+ *         }
+ *         else
+ *         {
+ *             // The command could not be sent, even after waiting for 100 ticks
+ *             // to pass.  Take appropriate action here.
+ *         }
+ *     }
+ * }
+ * @endverbatim
+ */
+ #define xTimerChangePeriod( xTimer, xNewPeriod, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_CHANGE_PERIOD, ( xNewPeriod ), NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerDelete( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task.  Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue.  The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code.  The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerDelete() deletes a timer that was previously created using the
+ * xTimerCreate() API function.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for
+ * xTimerDelete() to be available.
+ *
+ * @param xTimer The handle of the timer being deleted.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the delete command to be
+ * successfully sent to the timer command queue, should the queue already be
+ * full when xTimerDelete() was called.  xTicksToWait is ignored if xTimerDelete()
+ * is called before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the delete command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed.  pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system.  The timer
+ * service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ *
+ * See the xTimerChangePeriod() API function example usage scenario.
+ */
+#define xTimerDelete( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_DELETE, 0U, NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerReset( TimerHandle_t xTimer, TickType_t xTicksToWait );
+ *
+ * Timer functionality is provided by a timer service/daemon task.  Many of the
+ * public FreeRTOS timer API functions send commands to the timer service task
+ * through a queue called the timer command queue.  The timer command queue is
+ * private to the kernel itself and is not directly accessible to application
+ * code.  The length of the timer command queue is set by the
+ * configTIMER_QUEUE_LENGTH configuration constant.
+ *
+ * xTimerReset() re-starts a timer that was previously created using the
+ * xTimerCreate() API function.  If the timer had already been started and was
+ * already in the active state, then xTimerReset() will cause the timer to
+ * re-evaluate its expiry time so that it is relative to when xTimerReset() was
+ * called.  If the timer was in the dormant state then xTimerReset() has
+ * equivalent functionality to the xTimerStart() API function.
+ *
+ * Resetting a timer ensures the timer is in the active state.  If the timer
+ * is not stopped, deleted, or reset in the mean time, the callback function
+ * associated with the timer will get called 'n' ticks after xTimerReset() was
+ * called, where 'n' is the timers defined period.
+ *
+ * It is valid to call xTimerReset() before the scheduler has been started, but
+ * when this is done the timer will not actually start until the scheduler is
+ * started, and the timers expiry time will be relative to when the scheduler is
+ * started, not relative to when xTimerReset() was called.
+ *
+ * The configUSE_TIMERS configuration constant must be set to 1 for xTimerReset()
+ * to be available.
+ *
+ * @param xTimer The handle of the timer being reset/started/restarted.
+ *
+ * @param xTicksToWait Specifies the time, in ticks, that the calling task should
+ * be held in the Blocked state to wait for the reset command to be successfully
+ * sent to the timer command queue, should the queue already be full when
+ * xTimerReset() was called.  xTicksToWait is ignored if xTimerReset() is called
+ * before the scheduler is started.
+ *
+ * @return pdFAIL will be returned if the reset command could not be sent to
+ * the timer command queue even after xTicksToWait ticks had passed.  pdPASS will
+ * be returned if the command was successfully sent to the timer command queue.
+ * When the command is actually processed will depend on the priority of the
+ * timer service/daemon task relative to other tasks in the system, although the
+ * timers expiry time is relative to when xTimerStart() is actually called.  The
+ * timer service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // When a key is pressed, an LCD back-light is switched on.  If 5 seconds pass
+ * // without a key being pressed, then the LCD back-light is switched off.  In
+ * // this case, the timer is a one-shot timer.
+ *
+ * TimerHandle_t xBacklightTimer = NULL;
+ *
+ * // The callback function assigned to the one-shot timer.  In this case the
+ * // parameter is not used.
+ * void vBacklightTimerCallback( TimerHandle_t pxTimer )
+ * {
+ *     // The timer expired, therefore 5 seconds must have passed since a key
+ *     // was pressed.  Switch off the LCD back-light.
+ *     vSetBacklightState( BACKLIGHT_OFF );
+ * }
+ *
+ * // The key press event handler.
+ * void vKeyPressEventHandler( char cKey )
+ * {
+ *     // Ensure the LCD back-light is on, then reset the timer that is
+ *     // responsible for turning the back-light off after 5 seconds of
+ *     // key inactivity.  Wait 10 ticks for the command to be successfully sent
+ *     // if it cannot be sent immediately.
+ *     vSetBacklightState( BACKLIGHT_ON );
+ *     if( xTimerReset( xBacklightTimer, 100 ) != pdPASS )
+ *     {
+ *         // The reset command was not executed successfully.  Take appropriate
+ *         // action here.
+ *     }
+ *
+ *     // Perform the rest of the key processing here.
+ * }
+ *
+ * void main( void )
+ * {
+ * int32_t x;
+ *
+ *     // Create then start the one-shot timer that is responsible for turning
+ *     // the back-light off if no keys are pressed within a 5 second period.
+ *     xBacklightTimer = xTimerCreate( "BacklightTimer",           // Just a text name, not used by the kernel.
+ *                                     ( 5000 / portTICK_PERIOD_MS), // The timer period in ticks.
+ *                                     pdFALSE,                    // The timer is a one-shot timer.
+ *                                     0,                          // The id is not used by the callback so can take any value.
+ *                                     vBacklightTimerCallback     // The callback function that switches the LCD back-light off.
+ *                                   );
+ *
+ *     if( xBacklightTimer == NULL )
+ *     {
+ *         // The timer was not created.
+ *     }
+ *     else
+ *     {
+ *         // Start the timer.  No block time is specified, and even if one was
+ *         // it would be ignored because the scheduler has not yet been
+ *         // started.
+ *         if( xTimerStart( xBacklightTimer, 0 ) != pdPASS )
+ *         {
+ *             // The timer could not be set into the Active state.
+ *         }
+ *     }
+ *
+ *     // ...
+ *     // Create tasks here.
+ *     // ...
+ *
+ *     // Starting the scheduler will start the timer running as it has already
+ *     // been set into the active state.
+ *     vTaskStartScheduler();
+ *
+ *     // Should not reach here.
+ *     for( ;; );
+ * }
+ * @endverbatim
+ */
+#define xTimerReset( xTimer, xTicksToWait ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_RESET, ( xTaskGetTickCount() ), NULL, ( xTicksToWait ) )
+
+/**
+ * BaseType_t xTimerStartFromISR( 	TimerHandle_t xTimer,
+ *									BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerStart() that can be called from an interrupt service
+ * routine.
+ *
+ * @param xTimer The handle of the timer being started/restarted.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue.  Calling xTimerStartFromISR() writes a message to the timer
+ * command queue, so has the potential to transition the timer service/daemon
+ * task out of the Blocked state.  If calling xTimerStartFromISR() causes the
+ * timer service/daemon task to leave the Blocked state, and the timer service/
+ * daemon task has a priority equal to or greater than the currently executing
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will
+ * get set to pdTRUE internally within the xTimerStartFromISR() function.  If
+ * xTimerStartFromISR() sets this value to pdTRUE then a context switch should
+ * be performed before the interrupt exits.
+ *
+ * @return pdFAIL will be returned if the start command could not be sent to
+ * the timer command queue.  pdPASS will be returned if the command was
+ * successfully sent to the timer command queue.  When the command is actually
+ * processed will depend on the priority of the timer service/daemon task
+ * relative to other tasks in the system, although the timers expiry time is
+ * relative to when xTimerStartFromISR() is actually called.  The timer
+ * service/daemon task priority is set by the configTIMER_TASK_PRIORITY
+ * configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xBacklightTimer has already been created.  When a
+ * // key is pressed, an LCD back-light is switched on.  If 5 seconds pass
+ * // without a key being pressed, then the LCD back-light is switched off.  In
+ * // this case, the timer is a one-shot timer, and unlike the example given for
+ * // the xTimerReset() function, the key press event handler is an interrupt
+ * // service routine.
+ *
+ * // The callback function assigned to the one-shot timer.  In this case the
+ * // parameter is not used.
+ * void vBacklightTimerCallback( TimerHandle_t pxTimer )
+ * {
+ *     // The timer expired, therefore 5 seconds must have passed since a key
+ *     // was pressed.  Switch off the LCD back-light.
+ *     vSetBacklightState( BACKLIGHT_OFF );
+ * }
+ *
+ * // The key press interrupt service routine.
+ * void vKeyPressEventInterruptHandler( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ *     // Ensure the LCD back-light is on, then restart the timer that is
+ *     // responsible for turning the back-light off after 5 seconds of
+ *     // key inactivity.  This is an interrupt service routine so can only
+ *     // call FreeRTOS API functions that end in "FromISR".
+ *     vSetBacklightState( BACKLIGHT_ON );
+ *
+ *     // xTimerStartFromISR() or xTimerResetFromISR() could be called here
+ *     // as both cause the timer to re-calculate its expiry time.
+ *     // xHigherPriorityTaskWoken was initialised to pdFALSE when it was
+ *     // declared (in this function).
+ *     if( xTimerStartFromISR( xBacklightTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ *     {
+ *         // The start command was not executed successfully.  Take appropriate
+ *         // action here.
+ *     }
+ *
+ *     // Perform the rest of the key processing here.
+ *
+ *     // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ *     // should be performed.  The syntax required to perform a context switch
+ *     // from inside an ISR varies from port to port, and from compiler to
+ *     // compiler.  Inspect the demos for the port you are using to find the
+ *     // actual syntax required.
+ *     if( xHigherPriorityTaskWoken != pdFALSE )
+ *     {
+ *         // Call the interrupt safe yield function here (actual function
+ *         // depends on the FreeRTOS port being used).
+ *     }
+ * }
+ * @endverbatim
+ */
+#define xTimerStartFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_START_FROM_ISR, ( xTaskGetTickCountFromISR() ), ( pxHigherPriorityTaskWoken ), 0U )
+
+/**
+ * BaseType_t xTimerStopFromISR( 	TimerHandle_t xTimer,
+ *									BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerStop() that can be called from an interrupt service
+ * routine.
+ *
+ * @param xTimer The handle of the timer being stopped.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue.  Calling xTimerStopFromISR() writes a message to the timer
+ * command queue, so has the potential to transition the timer service/daemon
+ * task out of the Blocked state.  If calling xTimerStopFromISR() causes the
+ * timer service/daemon task to leave the Blocked state, and the timer service/
+ * daemon task has a priority equal to or greater than the currently executing
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will
+ * get set to pdTRUE internally within the xTimerStopFromISR() function.  If
+ * xTimerStopFromISR() sets this value to pdTRUE then a context switch should
+ * be performed before the interrupt exits.
+ *
+ * @return pdFAIL will be returned if the stop command could not be sent to
+ * the timer command queue.  pdPASS will be returned if the command was
+ * successfully sent to the timer command queue.  When the command is actually
+ * processed will depend on the priority of the timer service/daemon task
+ * relative to other tasks in the system.  The timer service/daemon task
+ * priority is set by the configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xTimer has already been created and started.  When
+ * // an interrupt occurs, the timer should be simply stopped.
+ *
+ * // The interrupt service routine that stops the timer.
+ * void vAnExampleInterruptServiceRoutine( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ *     // The interrupt has occurred - simply stop the timer.
+ *     // xHigherPriorityTaskWoken was set to pdFALSE where it was defined
+ *     // (within this function).  As this is an interrupt service routine, only
+ *     // FreeRTOS API functions that end in "FromISR" can be used.
+ *     if( xTimerStopFromISR( xTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ *     {
+ *         // The stop command was not executed successfully.  Take appropriate
+ *         // action here.
+ *     }
+ *
+ *     // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ *     // should be performed.  The syntax required to perform a context switch
+ *     // from inside an ISR varies from port to port, and from compiler to
+ *     // compiler.  Inspect the demos for the port you are using to find the
+ *     // actual syntax required.
+ *     if( xHigherPriorityTaskWoken != pdFALSE )
+ *     {
+ *         // Call the interrupt safe yield function here (actual function
+ *         // depends on the FreeRTOS port being used).
+ *     }
+ * }
+ * @endverbatim
+ */
+#define xTimerStopFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_STOP_FROM_ISR, 0, ( pxHigherPriorityTaskWoken ), 0U )
+
+/**
+ * BaseType_t xTimerChangePeriodFromISR( TimerHandle_t xTimer,
+ *										 TickType_t xNewPeriod,
+ *										 BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerChangePeriod() that can be called from an interrupt
+ * service routine.
+ *
+ * @param xTimer The handle of the timer that is having its period changed.
+ *
+ * @param xNewPeriod The new period for xTimer. Timer periods are specified in
+ * tick periods, so the constant portTICK_PERIOD_MS can be used to convert a time
+ * that has been specified in milliseconds.  For example, if the timer must
+ * expire after 100 ticks, then xNewPeriod should be set to 100.  Alternatively,
+ * if the timer must expire after 500ms, then xNewPeriod can be set to
+ * ( 500 / portTICK_PERIOD_MS ) provided configTICK_RATE_HZ is less than
+ * or equal to 1000.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue.  Calling xTimerChangePeriodFromISR() writes a message to the
+ * timer command queue, so has the potential to transition the timer service/
+ * daemon task out of the Blocked state.  If calling xTimerChangePeriodFromISR()
+ * causes the timer service/daemon task to leave the Blocked state, and the
+ * timer service/daemon task has a priority equal to or greater than the
+ * currently executing task (the task that was interrupted), then
+ * *pxHigherPriorityTaskWoken will get set to pdTRUE internally within the
+ * xTimerChangePeriodFromISR() function.  If xTimerChangePeriodFromISR() sets
+ * this value to pdTRUE then a context switch should be performed before the
+ * interrupt exits.
+ *
+ * @return pdFAIL will be returned if the command to change the timers period
+ * could not be sent to the timer command queue.  pdPASS will be returned if the
+ * command was successfully sent to the timer command queue.  When the command
+ * is actually processed will depend on the priority of the timer service/daemon
+ * task relative to other tasks in the system.  The timer service/daemon task
+ * priority is set by the configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xTimer has already been created and started.  When
+ * // an interrupt occurs, the period of xTimer should be changed to 500ms.
+ *
+ * // The interrupt service routine that changes the period of xTimer.
+ * void vAnExampleInterruptServiceRoutine( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ *     // The interrupt has occurred - change the period of xTimer to 500ms.
+ *     // xHigherPriorityTaskWoken was set to pdFALSE where it was defined
+ *     // (within this function).  As this is an interrupt service routine, only
+ *     // FreeRTOS API functions that end in "FromISR" can be used.
+ *     if( xTimerChangePeriodFromISR( xTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ *     {
+ *         // The command to change the timers period was not executed
+ *         // successfully.  Take appropriate action here.
+ *     }
+ *
+ *     // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ *     // should be performed.  The syntax required to perform a context switch
+ *     // from inside an ISR varies from port to port, and from compiler to
+ *     // compiler.  Inspect the demos for the port you are using to find the
+ *     // actual syntax required.
+ *     if( xHigherPriorityTaskWoken != pdFALSE )
+ *     {
+ *         // Call the interrupt safe yield function here (actual function
+ *         // depends on the FreeRTOS port being used).
+ *     }
+ * }
+ * @endverbatim
+ */
+#define xTimerChangePeriodFromISR( xTimer, xNewPeriod, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_CHANGE_PERIOD_FROM_ISR, ( xNewPeriod ), ( pxHigherPriorityTaskWoken ), 0U )
+
+/**
+ * BaseType_t xTimerResetFromISR( 	TimerHandle_t xTimer,
+ *									BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ * A version of xTimerReset() that can be called from an interrupt service
+ * routine.
+ *
+ * @param xTimer The handle of the timer that is to be started, reset, or
+ * restarted.
+ *
+ * @param pxHigherPriorityTaskWoken The timer service/daemon task spends most
+ * of its time in the Blocked state, waiting for messages to arrive on the timer
+ * command queue.  Calling xTimerResetFromISR() writes a message to the timer
+ * command queue, so has the potential to transition the timer service/daemon
+ * task out of the Blocked state.  If calling xTimerResetFromISR() causes the
+ * timer service/daemon task to leave the Blocked state, and the timer service/
+ * daemon task has a priority equal to or greater than the currently executing
+ * task (the task that was interrupted), then *pxHigherPriorityTaskWoken will
+ * get set to pdTRUE internally within the xTimerResetFromISR() function.  If
+ * xTimerResetFromISR() sets this value to pdTRUE then a context switch should
+ * be performed before the interrupt exits.
+ *
+ * @return pdFAIL will be returned if the reset command could not be sent to
+ * the timer command queue.  pdPASS will be returned if the command was
+ * successfully sent to the timer command queue.  When the command is actually
+ * processed will depend on the priority of the timer service/daemon task
+ * relative to other tasks in the system, although the timers expiry time is
+ * relative to when xTimerResetFromISR() is actually called.  The timer service/daemon
+ * task priority is set by the configTIMER_TASK_PRIORITY configuration constant.
+ *
+ * Example usage:
+ * @verbatim
+ * // This scenario assumes xBacklightTimer has already been created.  When a
+ * // key is pressed, an LCD back-light is switched on.  If 5 seconds pass
+ * // without a key being pressed, then the LCD back-light is switched off.  In
+ * // this case, the timer is a one-shot timer, and unlike the example given for
+ * // the xTimerReset() function, the key press event handler is an interrupt
+ * // service routine.
+ *
+ * // The callback function assigned to the one-shot timer.  In this case the
+ * // parameter is not used.
+ * void vBacklightTimerCallback( TimerHandle_t pxTimer )
+ * {
+ *     // The timer expired, therefore 5 seconds must have passed since a key
+ *     // was pressed.  Switch off the LCD back-light.
+ *     vSetBacklightState( BACKLIGHT_OFF );
+ * }
+ *
+ * // The key press interrupt service routine.
+ * void vKeyPressEventInterruptHandler( void )
+ * {
+ * BaseType_t xHigherPriorityTaskWoken = pdFALSE;
+ *
+ *     // Ensure the LCD back-light is on, then reset the timer that is
+ *     // responsible for turning the back-light off after 5 seconds of
+ *     // key inactivity.  This is an interrupt service routine so can only
+ *     // call FreeRTOS API functions that end in "FromISR".
+ *     vSetBacklightState( BACKLIGHT_ON );
+ *
+ *     // xTimerStartFromISR() or xTimerResetFromISR() could be called here
+ *     // as both cause the timer to re-calculate its expiry time.
+ *     // xHigherPriorityTaskWoken was initialised to pdFALSE when it was
+ *     // declared (in this function).
+ *     if( xTimerResetFromISR( xBacklightTimer, &xHigherPriorityTaskWoken ) != pdPASS )
+ *     {
+ *         // The reset command was not executed successfully.  Take appropriate
+ *         // action here.
+ *     }
+ *
+ *     // Perform the rest of the key processing here.
+ *
+ *     // If xHigherPriorityTaskWoken equals pdTRUE, then a context switch
+ *     // should be performed.  The syntax required to perform a context switch
+ *     // from inside an ISR varies from port to port, and from compiler to
+ *     // compiler.  Inspect the demos for the port you are using to find the
+ *     // actual syntax required.
+ *     if( xHigherPriorityTaskWoken != pdFALSE )
+ *     {
+ *         // Call the interrupt safe yield function here (actual function
+ *         // depends on the FreeRTOS port being used).
+ *     }
+ * }
+ * @endverbatim
+ */
+#define xTimerResetFromISR( xTimer, pxHigherPriorityTaskWoken ) xTimerGenericCommand( ( xTimer ), tmrCOMMAND_RESET_FROM_ISR, ( xTaskGetTickCountFromISR() ), ( pxHigherPriorityTaskWoken ), 0U )
+
+
+/**
+ * BaseType_t xTimerPendFunctionCallFromISR( PendedFunction_t xFunctionToPend,
+ *                                          void *pvParameter1,
+ *                                          uint32_t ulParameter2,
+ *                                          BaseType_t *pxHigherPriorityTaskWoken );
+ *
+ *
+ * Used from application interrupt service routines to defer the execution of a
+ * function to the RTOS daemon task (the timer service task, hence this function
+ * is implemented in timers.c and is prefixed with 'Timer').
+ *
+ * Ideally an interrupt service routine (ISR) is kept as short as possible, but
+ * sometimes an ISR either has a lot of processing to do, or needs to perform
+ * processing that is not deterministic.  In these cases
+ * xTimerPendFunctionCallFromISR() can be used to defer processing of a function
+ * to the RTOS daemon task.
+ *
+ * A mechanism is provided that allows the interrupt to return directly to the
+ * task that will subsequently execute the pended callback function.  This
+ * allows the callback function to execute contiguously in time with the
+ * interrupt - just as if the callback had executed in the interrupt itself.
+ *
+ * @param xFunctionToPend The function to execute from the timer service/
+ * daemon task.  The function must conform to the PendedFunction_t
+ * prototype.
+ *
+ * @param pvParameter1 The value of the callback function's first parameter.
+ * The parameter has a void * type to allow it to be used to pass any type.
+ * For example, unsigned longs can be cast to a void *, or the void * can be
+ * used to point to a structure.
+ *
+ * @param ulParameter2 The value of the callback function's second parameter.
+ *
+ * @param pxHigherPriorityTaskWoken As mentioned above, calling this function
+ * will result in a message being sent to the timer daemon task.  If the
+ * priority of the timer daemon task (which is set using
+ * configTIMER_TASK_PRIORITY in FreeRTOSConfig.h) is higher than the priority of
+ * the currently running task (the task the interrupt interrupted) then
+ * *pxHigherPriorityTaskWoken will be set to pdTRUE within
+ * xTimerPendFunctionCallFromISR(), indicating that a context switch should be
+ * requested before the interrupt exits.  For that reason
+ * *pxHigherPriorityTaskWoken must be initialised to pdFALSE.  See the
+ * example code below.
+ *
+ * @return pdPASS is returned if the message was successfully sent to the
+ * timer daemon task, otherwise pdFALSE is returned.
+ *
+ * Example usage:
+ * @verbatim
+ *
+ *	// The callback function that will execute in the context of the daemon task.
+ *  // Note callback functions must all use this same prototype.
+ *  void vProcessInterface( void *pvParameter1, uint32_t ulParameter2 )
+ *	{
+ *		BaseType_t xInterfaceToService;
+ *
+ *		// The interface that requires servicing is passed in the second
+ *      // parameter.  The first parameter is not used in this case.
+ *		xInterfaceToService = ( BaseType_t ) ulParameter2;
+ *
+ *		// ...Perform the processing here...
+ *	}
+ *
+ *	// An ISR that receives data packets from multiple interfaces
+ *  void vAnISR( void )
+ *	{
+ *		BaseType_t xInterfaceToService, xHigherPriorityTaskWoken;
+ *
+ *		// Query the hardware to determine which interface needs processing.
+ *		xInterfaceToService = prvCheckInterfaces();
+ *
+ *      // The actual processing is to be deferred to a task.  Request the
+ *      // vProcessInterface() callback function is executed, passing in the
+ *		// number of the interface that needs processing.  The interface to
+ *		// service is passed in the second parameter.  The first parameter is
+ *		// not used in this case.
+ *		xHigherPriorityTaskWoken = pdFALSE;
+ *		xTimerPendFunctionCallFromISR( vProcessInterface, NULL, ( uint32_t ) xInterfaceToService, &xHigherPriorityTaskWoken );
+ *
+ *		// If xHigherPriorityTaskWoken is now set to pdTRUE then a context
+ *		// switch should be requested.  The macro used is port specific and will
+ *		// be either portYIELD_FROM_ISR() or portEND_SWITCHING_ISR() - refer to
+ *		// the documentation page for the port being used.
+ *		portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
+ *
+ *	}
+ * @endverbatim
+ */
+BaseType_t xTimerPendFunctionCallFromISR( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, BaseType_t *pxHigherPriorityTaskWoken ) PRIVILEGED_FUNCTION;
+
+ /**
+  * BaseType_t xTimerPendFunctionCall( PendedFunction_t xFunctionToPend,
+  *                                    void *pvParameter1,
+  *                                    uint32_t ulParameter2,
+  *                                    TickType_t xTicksToWait );
+  *
+  *
+  * Used to defer the execution of a function to the RTOS daemon task (the timer
+  * service task, hence this function is implemented in timers.c and is prefixed
+  * with 'Timer').
+  *
+  * @param xFunctionToPend The function to execute from the timer service/
+  * daemon task.  The function must conform to the PendedFunction_t
+  * prototype.
+  *
+  * @param pvParameter1 The value of the callback function's first parameter.
+  * The parameter has a void * type to allow it to be used to pass any type.
+  * For example, unsigned longs can be cast to a void *, or the void * can be
+  * used to point to a structure.
+  *
+  * @param ulParameter2 The value of the callback function's second parameter.
+  *
+  * @param xTicksToWait Calling this function will result in a message being
+  * sent to the timer daemon task on a queue.  xTicksToWait is the amount of
+  * time the calling task should remain in the Blocked state (so not using any
+  * processing time) for space to become available on the timer queue if the
+  * queue is found to be full.
+  *
+  * @return pdPASS is returned if the message was successfully sent to the
+  * timer daemon task, otherwise pdFALSE is returned.
+  *
+  */
+BaseType_t xTimerPendFunctionCall( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+/**
+ * const char * const pcTimerGetName( TimerHandle_t xTimer );
+ *
+ * Returns the name that was assigned to a timer when the timer was created.
+ *
+ * @param xTimer The handle of the timer being queried.
+ *
+ * @return The name assigned to the timer specified by the xTimer parameter.
+ */
+const char * pcTimerGetName( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/**
+ * TickType_t xTimerGetPeriod( TimerHandle_t xTimer );
+ *
+ * Returns the period of a timer.
+ *
+ * @param xTimer The handle of the timer being queried.
+ *
+ * @return The period of the timer in ticks.
+ */
+TickType_t xTimerGetPeriod( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/**
+* TickType_t xTimerGetExpiryTime( TimerHandle_t xTimer );
+*
+* Returns the time in ticks at which the timer will expire.  If this is less
+* than the current tick count then the expiry time has overflowed from the
+* current time.
+*
+* @param xTimer The handle of the timer being queried.
+*
+* @return If the timer is running then the time in ticks at which the timer
+* will next expire is returned.  If the timer is not running then the return
+* value is undefined.
+*/
+TickType_t xTimerGetExpiryTime( TimerHandle_t xTimer ) PRIVILEGED_FUNCTION;
+
+/*
+ * Functions beyond this part are not part of the public API and are intended
+ * for use by the kernel only.
+ */
+BaseType_t xTimerCreateTimerTask( void ) PRIVILEGED_FUNCTION;
+BaseType_t xTimerGenericCommand( TimerHandle_t xTimer, const BaseType_t xCommandID, const TickType_t xOptionalValue, BaseType_t * const pxHigherPriorityTaskWoken, const TickType_t xTicksToWait ) PRIVILEGED_FUNCTION;
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* TIMERS_H */
+
+
+
diff --git a/Program/XLLC/FreeRTOS/list.c b/Program/XLLC/FreeRTOS/list.c
new file mode 100644
index 0000000000000000000000000000000000000000..0c0047423e7643ea16733ea41c967fe007c19443
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/list.c
@@ -0,0 +1,240 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+
+#include 
+#include "FreeRTOS.h"
+#include "list.h"
+
+/*-----------------------------------------------------------
+ * PUBLIC LIST API documented in list.h
+ *----------------------------------------------------------*/
+
+void vListInitialise( List_t * const pxList )
+{
+	/* The list structure contains a list item which is used to mark the
+	end of the list.  To initialise the list the list end is inserted
+	as the only list entry. */
+	pxList->pxIndex = ( ListItem_t * ) &( pxList->xListEnd );			/*lint !e826 !e740 The mini list structure is used as the list end to save RAM.  This is checked and valid. */
+
+	/* The list end value is the highest possible value in the list to
+	ensure it remains at the end of the list. */
+	pxList->xListEnd.xItemValue = portMAX_DELAY;
+
+	/* The list end next and previous pointers point to itself so we know
+	when the list is empty. */
+	pxList->xListEnd.pxNext = ( ListItem_t * ) &( pxList->xListEnd );	/*lint !e826 !e740 The mini list structure is used as the list end to save RAM.  This is checked and valid. */
+	pxList->xListEnd.pxPrevious = ( ListItem_t * ) &( pxList->xListEnd );/*lint !e826 !e740 The mini list structure is used as the list end to save RAM.  This is checked and valid. */
+
+	pxList->uxNumberOfItems = ( UBaseType_t ) 0U;
+
+	/* Write known values into the list if
+	configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
+	listSET_LIST_INTEGRITY_CHECK_1_VALUE( pxList );
+	listSET_LIST_INTEGRITY_CHECK_2_VALUE( pxList );
+}
+/*-----------------------------------------------------------*/
+
+void vListInitialiseItem( ListItem_t * const pxItem )
+{
+	/* Make sure the list item is not recorded as being on a list. */
+	pxItem->pvContainer = NULL;
+
+	/* Write known values into the list item if
+	configUSE_LIST_DATA_INTEGRITY_CHECK_BYTES is set to 1. */
+	listSET_FIRST_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
+	listSET_SECOND_LIST_ITEM_INTEGRITY_CHECK_VALUE( pxItem );
+}
+/*-----------------------------------------------------------*/
+
+void vListInsertEnd( List_t * const pxList, ListItem_t * const pxNewListItem )
+{
+ListItem_t * const pxIndex = pxList->pxIndex;
+
+	/* Only effective when configASSERT() is also defined, these tests may catch
+	the list data structures being overwritten in memory.  They will not catch
+	data errors caused by incorrect configuration or use of FreeRTOS. */
+	listTEST_LIST_INTEGRITY( pxList );
+	listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
+
+	/* Insert a new list item into pxList, but rather than sort the list,
+	makes the new list item the last item to be removed by a call to
+	listGET_OWNER_OF_NEXT_ENTRY(). */
+	pxNewListItem->pxNext = pxIndex;
+	pxNewListItem->pxPrevious = pxIndex->pxPrevious;
+
+	/* Only used during decision coverage testing. */
+	mtCOVERAGE_TEST_DELAY();
+
+	pxIndex->pxPrevious->pxNext = pxNewListItem;
+	pxIndex->pxPrevious = pxNewListItem;
+
+	/* Remember which list the item is in. */
+	pxNewListItem->pvContainer = ( void * ) pxList;
+
+	( pxList->uxNumberOfItems )++;
+}
+/*-----------------------------------------------------------*/
+
+void vListInsert( List_t * const pxList, ListItem_t * const pxNewListItem )
+{
+ListItem_t *pxIterator;
+const TickType_t xValueOfInsertion = pxNewListItem->xItemValue;
+
+	/* Only effective when configASSERT() is also defined, these tests may catch
+	the list data structures being overwritten in memory.  They will not catch
+	data errors caused by incorrect configuration or use of FreeRTOS. */
+	listTEST_LIST_INTEGRITY( pxList );
+	listTEST_LIST_ITEM_INTEGRITY( pxNewListItem );
+
+	/* Insert the new list item into the list, sorted in xItemValue order.
+
+	If the list already contains a list item with the same item value then the
+	new list item should be placed after it.  This ensures that TCB's which are
+	stored in ready lists (all of which have the same xItemValue value) get a
+	share of the CPU.  However, if the xItemValue is the same as the back marker
+	the iteration loop below will not end.  Therefore the value is checked
+	first, and the algorithm slightly modified if necessary. */
+	if( xValueOfInsertion == portMAX_DELAY )
+	{
+		pxIterator = pxList->xListEnd.pxPrevious;
+	}
+	else
+	{
+		/* *** NOTE ***********************************************************
+		If you find your application is crashing here then likely causes are
+		listed below.  In addition see http://www.freertos.org/FAQHelp.html for
+		more tips, and ensure configASSERT() is defined!
+		http://www.freertos.org/a00110.html#configASSERT
+
+			1) Stack overflow -
+			   see http://www.freertos.org/Stacks-and-stack-overflow-checking.html
+			2) Incorrect interrupt priority assignment, especially on Cortex-M
+			   parts where numerically high priority values denote low actual
+			   interrupt priorities, which can seem counter intuitive.  See
+			   http://www.freertos.org/RTOS-Cortex-M3-M4.html and the definition
+			   of configMAX_SYSCALL_INTERRUPT_PRIORITY on
+			   http://www.freertos.org/a00110.html
+			3) Calling an API function from within a critical section or when
+			   the scheduler is suspended, or calling an API function that does
+			   not end in "FromISR" from an interrupt.
+			4) Using a queue or semaphore before it has been initialised or
+			   before the scheduler has been started (are interrupts firing
+			   before vTaskStartScheduler() has been called?).
+		**********************************************************************/
+
+		for( pxIterator = ( ListItem_t * ) &( pxList->xListEnd ); pxIterator->pxNext->xItemValue <= xValueOfInsertion; pxIterator = pxIterator->pxNext ) /*lint !e826 !e740 The mini list structure is used as the list end to save RAM.  This is checked and valid. */
+		{
+			/* There is nothing to do here, just iterating to the wanted
+			insertion position. */
+		}
+	}
+
+	pxNewListItem->pxNext = pxIterator->pxNext;
+	pxNewListItem->pxNext->pxPrevious = pxNewListItem;
+	pxNewListItem->pxPrevious = pxIterator;
+	pxIterator->pxNext = pxNewListItem;
+
+	/* Remember which list the item is in.  This allows fast removal of the
+	item later. */
+	pxNewListItem->pvContainer = ( void * ) pxList;
+
+	( pxList->uxNumberOfItems )++;
+}
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxListRemove( ListItem_t * const pxItemToRemove )
+{
+/* The list item knows which list it is in.  Obtain the list from the list
+item. */
+List_t * const pxList = ( List_t * ) pxItemToRemove->pvContainer;
+
+	pxItemToRemove->pxNext->pxPrevious = pxItemToRemove->pxPrevious;
+	pxItemToRemove->pxPrevious->pxNext = pxItemToRemove->pxNext;
+
+	/* Only used during decision coverage testing. */
+	mtCOVERAGE_TEST_DELAY();
+
+	/* Make sure the index is left pointing to a valid item. */
+	if( pxList->pxIndex == pxItemToRemove )
+	{
+		pxList->pxIndex = pxItemToRemove->pxPrevious;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	pxItemToRemove->pvContainer = NULL;
+	( pxList->uxNumberOfItems )--;
+
+	return pxList->uxNumberOfItems;
+}
+/*-----------------------------------------------------------*/
+
diff --git a/Program/XLLC/FreeRTOS/portable/Keil/See-also-the-RVDS-directory.txt b/Program/XLLC/FreeRTOS/portable/Keil/See-also-the-RVDS-directory.txt
new file mode 100644
index 0000000000000000000000000000000000000000..bd7fab73926329929ed7860dd9ca186e9fef5d45
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/Keil/See-also-the-RVDS-directory.txt
@@ -0,0 +1 @@
+Nothing to see here.
\ No newline at end of file
diff --git a/Program/XLLC/FreeRTOS/portable/MemMang/ReadMe.url b/Program/XLLC/FreeRTOS/portable/MemMang/ReadMe.url
new file mode 100644
index 0000000000000000000000000000000000000000..b04bfe3e50b37de1f517d3c474cee64d98af4f31
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/MemMang/ReadMe.url
@@ -0,0 +1,5 @@
+[{000214A0-0000-0000-C000-000000000046}]
+Prop3=19,2
+[InternetShortcut]
+URL=http://www.freertos.org/a00111.html
+IDList=
diff --git a/Program/XLLC/FreeRTOS/portable/MemMang/heap_1.c b/Program/XLLC/FreeRTOS/portable/MemMang/heap_1.c
new file mode 100644
index 0000000000000000000000000000000000000000..435c99d05b05494a2e45f17bdc9a4967ba05efc2
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/MemMang/heap_1.c
@@ -0,0 +1,188 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+
+/*
+ * The simplest possible implementation of pvPortMalloc().  Note that this
+ * implementation does NOT allow allocated memory to be freed again.
+ *
+ * See heap_2.c, heap_3.c and heap_4.c for alternative implementations, and the
+ * memory management pages of http://www.FreeRTOS.org for more information.
+ */
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 0 )
+	#error This file must not be used if configSUPPORT_DYNAMIC_ALLOCATION is 0
+#endif
+
+/* A few bytes might be lost to byte aligning the heap start address. */
+#define configADJUSTED_HEAP_SIZE	( configTOTAL_HEAP_SIZE - portBYTE_ALIGNMENT )
+
+/* Allocate the memory for the heap. */
+/* Allocate the memory for the heap. */
+#if( configAPPLICATION_ALLOCATED_HEAP == 1 )
+	/* The application writer has already defined the array used for the RTOS
+	heap - probably so it can be placed in a special segment or address. */
+	extern uint8_t ucHeap[ configTOTAL_HEAP_SIZE ];
+#else
+	static uint8_t ucHeap[ configTOTAL_HEAP_SIZE ];
+#endif /* configAPPLICATION_ALLOCATED_HEAP */
+
+static size_t xNextFreeByte = ( size_t ) 0;
+
+/*-----------------------------------------------------------*/
+
+void *pvPortMalloc( size_t xWantedSize )
+{
+void *pvReturn = NULL;
+static uint8_t *pucAlignedHeap = NULL;
+
+	/* Ensure that blocks are always aligned to the required number of bytes. */
+	#if( portBYTE_ALIGNMENT != 1 )
+	{
+		if( xWantedSize & portBYTE_ALIGNMENT_MASK )
+		{
+			/* Byte alignment required. */
+			xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
+		}
+	}
+	#endif
+
+	vTaskSuspendAll();
+	{
+		if( pucAlignedHeap == NULL )
+		{
+			/* Ensure the heap starts on a correctly aligned boundary. */
+			pucAlignedHeap = ( uint8_t * ) ( ( ( portPOINTER_SIZE_TYPE ) &ucHeap[ portBYTE_ALIGNMENT ] ) & ( ~( ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) ) );
+		}
+
+		/* Check there is enough room left for the allocation. */
+		if( ( ( xNextFreeByte + xWantedSize ) < configADJUSTED_HEAP_SIZE ) &&
+			( ( xNextFreeByte + xWantedSize ) > xNextFreeByte )	)/* Check for overflow. */
+		{
+			/* Return the next free byte then increment the index past this
+			block. */
+			pvReturn = pucAlignedHeap + xNextFreeByte;
+			xNextFreeByte += xWantedSize;
+		}
+
+		traceMALLOC( pvReturn, xWantedSize );
+	}
+	( void ) xTaskResumeAll();
+
+	#if( configUSE_MALLOC_FAILED_HOOK == 1 )
+	{
+		if( pvReturn == NULL )
+		{
+			extern void vApplicationMallocFailedHook( void );
+			vApplicationMallocFailedHook();
+		}
+	}
+	#endif
+
+	return pvReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vPortFree( void *pv )
+{
+	/* Memory cannot be freed using this scheme.  See heap_2.c, heap_3.c and
+	heap_4.c for alternative implementations, and the memory management pages of
+	http://www.FreeRTOS.org for more information. */
+	( void ) pv;
+
+	/* Force an assert as it is invalid to call this function. */
+	configASSERT( pv == NULL );
+}
+/*-----------------------------------------------------------*/
+
+void vPortInitialiseBlocks( void )
+{
+	/* Only required when static memory is not cleared. */
+	xNextFreeByte = ( size_t ) 0;
+}
+/*-----------------------------------------------------------*/
+
+size_t xPortGetFreeHeapSize( void )
+{
+	return ( configADJUSTED_HEAP_SIZE - xNextFreeByte );
+}
+
+
+
diff --git a/Program/XLLC/FreeRTOS/portable/MemMang/heap_2.c b/Program/XLLC/FreeRTOS/portable/MemMang/heap_2.c
new file mode 100644
index 0000000000000000000000000000000000000000..fb9c8b1ce0e7883e26af04f6672713aca92b820f
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/MemMang/heap_2.c
@@ -0,0 +1,314 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+/*
+ * A sample implementation of pvPortMalloc() and vPortFree() that permits
+ * allocated blocks to be freed, but does not combine adjacent free blocks
+ * into a single larger block (and so will fragment memory).  See heap_4.c for
+ * an equivalent that does combine adjacent blocks into single larger blocks.
+ *
+ * See heap_1.c, heap_3.c and heap_4.c for alternative implementations, and the
+ * memory management pages of http://www.FreeRTOS.org for more information.
+ */
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 0 )
+	#error This file must not be used if configSUPPORT_DYNAMIC_ALLOCATION is 0
+#endif
+
+/* A few bytes might be lost to byte aligning the heap start address. */
+#define configADJUSTED_HEAP_SIZE	( configTOTAL_HEAP_SIZE - portBYTE_ALIGNMENT )
+
+/*
+ * Initialises the heap structures before their first use.
+ */
+static void prvHeapInit( void );
+
+/* Allocate the memory for the heap. */
+#if( configAPPLICATION_ALLOCATED_HEAP == 1 )
+	/* The application writer has already defined the array used for the RTOS
+	heap - probably so it can be placed in a special segment or address. */
+	extern uint8_t ucHeap[ configTOTAL_HEAP_SIZE ];
+#else
+	static uint8_t ucHeap[ configTOTAL_HEAP_SIZE ];
+#endif /* configAPPLICATION_ALLOCATED_HEAP */
+
+
+/* Define the linked list structure.  This is used to link free blocks in order
+of their size. */
+typedef struct A_BLOCK_LINK
+{
+	struct A_BLOCK_LINK *pxNextFreeBlock;	/*<< The next free block in the list. */
+	size_t xBlockSize;						/*<< The size of the free block. */
+} BlockLink_t;
+
+
+static const uint16_t heapSTRUCT_SIZE	= ( ( sizeof ( BlockLink_t ) + ( portBYTE_ALIGNMENT - 1 ) ) & ~portBYTE_ALIGNMENT_MASK );
+#define heapMINIMUM_BLOCK_SIZE	( ( size_t ) ( heapSTRUCT_SIZE * 2 ) )
+
+/* Create a couple of list links to mark the start and end of the list. */
+static BlockLink_t xStart, xEnd;
+
+/* Keeps track of the number of free bytes remaining, but says nothing about
+fragmentation. */
+static size_t xFreeBytesRemaining = configADJUSTED_HEAP_SIZE;
+
+/* STATIC FUNCTIONS ARE DEFINED AS MACROS TO MINIMIZE THE FUNCTION CALL DEPTH. */
+
+/*
+ * Insert a block into the list of free blocks - which is ordered by size of
+ * the block.  Small blocks at the start of the list and large blocks at the end
+ * of the list.
+ */
+#define prvInsertBlockIntoFreeList( pxBlockToInsert )								\
+{																					\
+BlockLink_t *pxIterator;															\
+size_t xBlockSize;																	\
+																					\
+	xBlockSize = pxBlockToInsert->xBlockSize;										\
+																					\
+	/* Iterate through the list until a block is found that has a larger size */	\
+	/* than the block we are inserting. */											\
+	for( pxIterator = &xStart; pxIterator->pxNextFreeBlock->xBlockSize < xBlockSize; pxIterator = pxIterator->pxNextFreeBlock )	\
+	{																				\
+		/* There is nothing to do here - just iterate to the correct position. */	\
+	}																				\
+																					\
+	/* Update the list to include the block being inserted in the correct */		\
+	/* position. */																	\
+	pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock;					\
+	pxIterator->pxNextFreeBlock = pxBlockToInsert;									\
+}
+/*-----------------------------------------------------------*/
+
+void *pvPortMalloc( size_t xWantedSize )
+{
+BlockLink_t *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
+static BaseType_t xHeapHasBeenInitialised = pdFALSE;
+void *pvReturn = NULL;
+
+	vTaskSuspendAll();
+	{
+		/* If this is the first call to malloc then the heap will require
+		initialisation to setup the list of free blocks. */
+		if( xHeapHasBeenInitialised == pdFALSE )
+		{
+			prvHeapInit();
+			xHeapHasBeenInitialised = pdTRUE;
+		}
+
+		/* The wanted size is increased so it can contain a BlockLink_t
+		structure in addition to the requested amount of bytes. */
+		if( xWantedSize > 0 )
+		{
+			xWantedSize += heapSTRUCT_SIZE;
+
+			/* Ensure that blocks are always aligned to the required number of bytes. */
+			if( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) != 0 )
+			{
+				/* Byte alignment required. */
+				xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
+			}
+		}
+
+		if( ( xWantedSize > 0 ) && ( xWantedSize < configADJUSTED_HEAP_SIZE ) )
+		{
+			/* Blocks are stored in byte order - traverse the list from the start
+			(smallest) block until one of adequate size is found. */
+			pxPreviousBlock = &xStart;
+			pxBlock = xStart.pxNextFreeBlock;
+			while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock != NULL ) )
+			{
+				pxPreviousBlock = pxBlock;
+				pxBlock = pxBlock->pxNextFreeBlock;
+			}
+
+			/* If we found the end marker then a block of adequate size was not found. */
+			if( pxBlock != &xEnd )
+			{
+				/* Return the memory space - jumping over the BlockLink_t structure
+				at its start. */
+				pvReturn = ( void * ) ( ( ( uint8_t * ) pxPreviousBlock->pxNextFreeBlock ) + heapSTRUCT_SIZE );
+
+				/* This block is being returned for use so must be taken out of the
+				list of free blocks. */
+				pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
+
+				/* If the block is larger than required it can be split into two. */
+				if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )
+				{
+					/* This block is to be split into two.  Create a new block
+					following the number of bytes requested. The void cast is
+					used to prevent byte alignment warnings from the compiler. */
+					pxNewBlockLink = ( void * ) ( ( ( uint8_t * ) pxBlock ) + xWantedSize );
+
+					/* Calculate the sizes of two blocks split from the single
+					block. */
+					pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
+					pxBlock->xBlockSize = xWantedSize;
+
+					/* Insert the new block into the list of free blocks. */
+					prvInsertBlockIntoFreeList( ( pxNewBlockLink ) );
+				}
+
+				xFreeBytesRemaining -= pxBlock->xBlockSize;
+			}
+		}
+
+		traceMALLOC( pvReturn, xWantedSize );
+	}
+	( void ) xTaskResumeAll();
+
+	#if( configUSE_MALLOC_FAILED_HOOK == 1 )
+	{
+		if( pvReturn == NULL )
+		{
+			extern void vApplicationMallocFailedHook( void );
+			vApplicationMallocFailedHook();
+		}
+	}
+	#endif
+
+	return pvReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vPortFree( void *pv )
+{
+uint8_t *puc = ( uint8_t * ) pv;
+BlockLink_t *pxLink;
+
+	if( pv != NULL )
+	{
+		/* The memory being freed will have an BlockLink_t structure immediately
+		before it. */
+		puc -= heapSTRUCT_SIZE;
+
+		/* This unexpected casting is to keep some compilers from issuing
+		byte alignment warnings. */
+		pxLink = ( void * ) puc;
+
+		vTaskSuspendAll();
+		{
+			/* Add this block to the list of free blocks. */
+			prvInsertBlockIntoFreeList( ( ( BlockLink_t * ) pxLink ) );
+			xFreeBytesRemaining += pxLink->xBlockSize;
+			traceFREE( pv, pxLink->xBlockSize );
+		}
+		( void ) xTaskResumeAll();
+	}
+}
+/*-----------------------------------------------------------*/
+
+size_t xPortGetFreeHeapSize( void )
+{
+	return xFreeBytesRemaining;
+}
+/*-----------------------------------------------------------*/
+
+void vPortInitialiseBlocks( void )
+{
+	/* This just exists to keep the linker quiet. */
+}
+/*-----------------------------------------------------------*/
+
+static void prvHeapInit( void )
+{
+BlockLink_t *pxFirstFreeBlock;
+uint8_t *pucAlignedHeap;
+
+	/* Ensure the heap starts on a correctly aligned boundary. */
+	pucAlignedHeap = ( uint8_t * ) ( ( ( portPOINTER_SIZE_TYPE ) &ucHeap[ portBYTE_ALIGNMENT ] ) & ( ~( ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) ) );
+
+	/* xStart is used to hold a pointer to the first item in the list of free
+	blocks.  The void cast is used to prevent compiler warnings. */
+	xStart.pxNextFreeBlock = ( void * ) pucAlignedHeap;
+	xStart.xBlockSize = ( size_t ) 0;
+
+	/* xEnd is used to mark the end of the list of free blocks. */
+	xEnd.xBlockSize = configADJUSTED_HEAP_SIZE;
+	xEnd.pxNextFreeBlock = NULL;
+
+	/* To start with there is a single free block that is sized to take up the
+	entire heap space. */
+	pxFirstFreeBlock = ( void * ) pucAlignedHeap;
+	pxFirstFreeBlock->xBlockSize = configADJUSTED_HEAP_SIZE;
+	pxFirstFreeBlock->pxNextFreeBlock = &xEnd;
+}
+/*-----------------------------------------------------------*/
diff --git a/Program/XLLC/FreeRTOS/portable/MemMang/heap_3.c b/Program/XLLC/FreeRTOS/portable/MemMang/heap_3.c
new file mode 100644
index 0000000000000000000000000000000000000000..cda8aa70301d1e2c2e63ad65660bc3adae2e9677
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/MemMang/heap_3.c
@@ -0,0 +1,139 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+
+/*
+ * Implementation of pvPortMalloc() and vPortFree() that relies on the
+ * compilers own malloc() and free() implementations.
+ *
+ * This file can only be used if the linker is configured to to generate
+ * a heap memory area.
+ *
+ * See heap_1.c, heap_2.c and heap_4.c for alternative implementations, and the
+ * memory management pages of http://www.FreeRTOS.org for more information.
+ */
+
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 0 )
+	#error This file must not be used if configSUPPORT_DYNAMIC_ALLOCATION is 0
+#endif
+
+/*-----------------------------------------------------------*/
+
+void *pvPortMalloc( size_t xWantedSize )
+{
+void *pvReturn;
+
+	vTaskSuspendAll();
+	{
+		pvReturn = malloc( xWantedSize );
+		traceMALLOC( pvReturn, xWantedSize );
+	}
+	( void ) xTaskResumeAll();
+
+	#if( configUSE_MALLOC_FAILED_HOOK == 1 )
+	{
+		if( pvReturn == NULL )
+		{
+			extern void vApplicationMallocFailedHook( void );
+			vApplicationMallocFailedHook();
+		}
+	}
+	#endif
+
+	return pvReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vPortFree( void *pv )
+{
+	if( pv )
+	{
+		vTaskSuspendAll();
+		{
+			free( pv );
+			traceFREE( pv, 0 );
+		}
+		( void ) xTaskResumeAll();
+	}
+}
+
+
+
diff --git a/Program/XLLC/FreeRTOS/portable/MemMang/heap_4.c b/Program/XLLC/FreeRTOS/portable/MemMang/heap_4.c
new file mode 100644
index 0000000000000000000000000000000000000000..1091371e308608fe1fb5542eff034e1a46bd3fbb
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/MemMang/heap_4.c
@@ -0,0 +1,478 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+/*
+ * A sample implementation of pvPortMalloc() and vPortFree() that combines
+ * (coalescences) adjacent memory blocks as they are freed, and in so doing
+ * limits memory fragmentation.
+ *
+ * See heap_1.c, heap_2.c and heap_3.c for alternative implementations, and the
+ * memory management pages of http://www.FreeRTOS.org for more information.
+ */
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 0 )
+	#error This file must not be used if configSUPPORT_DYNAMIC_ALLOCATION is 0
+#endif
+
+/* Block sizes must not get too small. */
+#define heapMINIMUM_BLOCK_SIZE	( ( size_t ) ( xHeapStructSize << 1 ) )
+
+/* Assumes 8bit bytes! */
+#define heapBITS_PER_BYTE		( ( size_t ) 8 )
+
+/* Allocate the memory for the heap. */
+#if( configAPPLICATION_ALLOCATED_HEAP == 1 )
+	/* The application writer has already defined the array used for the RTOS
+	heap - probably so it can be placed in a special segment or address. */
+	extern uint8_t ucHeap[ configTOTAL_HEAP_SIZE ];
+#else
+	static uint8_t ucHeap[ configTOTAL_HEAP_SIZE ];
+#endif /* configAPPLICATION_ALLOCATED_HEAP */
+
+/* Define the linked list structure.  This is used to link free blocks in order
+of their memory address. */
+typedef struct A_BLOCK_LINK
+{
+	struct A_BLOCK_LINK *pxNextFreeBlock;	/*<< The next free block in the list. */
+	size_t xBlockSize;						/*<< The size of the free block. */
+} BlockLink_t;
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Inserts a block of memory that is being freed into the correct position in
+ * the list of free memory blocks.  The block being freed will be merged with
+ * the block in front it and/or the block behind it if the memory blocks are
+ * adjacent to each other.
+ */
+static void prvInsertBlockIntoFreeList( BlockLink_t *pxBlockToInsert );
+
+/*
+ * Called automatically to setup the required heap structures the first time
+ * pvPortMalloc() is called.
+ */
+static void prvHeapInit( void );
+
+/*-----------------------------------------------------------*/
+
+/* The size of the structure placed at the beginning of each allocated memory
+block must by correctly byte aligned. */
+static const size_t xHeapStructSize	= ( sizeof( BlockLink_t ) + ( ( size_t ) ( portBYTE_ALIGNMENT - 1 ) ) ) & ~( ( size_t ) portBYTE_ALIGNMENT_MASK );
+
+/* Create a couple of list links to mark the start and end of the list. */
+static BlockLink_t xStart, *pxEnd = NULL;
+
+/* Keeps track of the number of free bytes remaining, but says nothing about
+fragmentation. */
+static size_t xFreeBytesRemaining = 0U;
+static size_t xMinimumEverFreeBytesRemaining = 0U;
+
+/* Gets set to the top bit of an size_t type.  When this bit in the xBlockSize
+member of an BlockLink_t structure is set then the block belongs to the
+application.  When the bit is free the block is still part of the free heap
+space. */
+static size_t xBlockAllocatedBit = 0;
+
+/*-----------------------------------------------------------*/
+
+void *pvPortMalloc( size_t xWantedSize )
+{
+BlockLink_t *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
+void *pvReturn = NULL;
+
+	vTaskSuspendAll();
+	{
+		/* If this is the first call to malloc then the heap will require
+		initialisation to setup the list of free blocks. */
+		if( pxEnd == NULL )
+		{
+			prvHeapInit();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		/* Check the requested block size is not so large that the top bit is
+		set.  The top bit of the block size member of the BlockLink_t structure
+		is used to determine who owns the block - the application or the
+		kernel, so it must be free. */
+		if( ( xWantedSize & xBlockAllocatedBit ) == 0 )
+		{
+			/* The wanted size is increased so it can contain a BlockLink_t
+			structure in addition to the requested amount of bytes. */
+			if( xWantedSize > 0 )
+			{
+				xWantedSize += xHeapStructSize;
+
+				/* Ensure that blocks are always aligned to the required number
+				of bytes. */
+				if( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) != 0x00 )
+				{
+					/* Byte alignment required. */
+					xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
+					configASSERT( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) == 0 );
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			if( ( xWantedSize > 0 ) && ( xWantedSize <= xFreeBytesRemaining ) )
+			{
+				/* Traverse the list from the start	(lowest address) block until
+				one	of adequate size is found. */
+				pxPreviousBlock = &xStart;
+				pxBlock = xStart.pxNextFreeBlock;
+				while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock != NULL ) )
+				{
+					pxPreviousBlock = pxBlock;
+					pxBlock = pxBlock->pxNextFreeBlock;
+				}
+
+				/* If the end marker was reached then a block of adequate size
+				was	not found. */
+				if( pxBlock != pxEnd )
+				{
+					/* Return the memory space pointed to - jumping over the
+					BlockLink_t structure at its start. */
+					pvReturn = ( void * ) ( ( ( uint8_t * ) pxPreviousBlock->pxNextFreeBlock ) + xHeapStructSize );
+
+					/* This block is being returned for use so must be taken out
+					of the list of free blocks. */
+					pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
+
+					/* If the block is larger than required it can be split into
+					two. */
+					if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )
+					{
+						/* This block is to be split into two.  Create a new
+						block following the number of bytes requested. The void
+						cast is used to prevent byte alignment warnings from the
+						compiler. */
+						pxNewBlockLink = ( void * ) ( ( ( uint8_t * ) pxBlock ) + xWantedSize );
+						configASSERT( ( ( ( size_t ) pxNewBlockLink ) & portBYTE_ALIGNMENT_MASK ) == 0 );
+
+						/* Calculate the sizes of two blocks split from the
+						single block. */
+						pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
+						pxBlock->xBlockSize = xWantedSize;
+
+						/* Insert the new block into the list of free blocks. */
+						prvInsertBlockIntoFreeList( pxNewBlockLink );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					xFreeBytesRemaining -= pxBlock->xBlockSize;
+
+					if( xFreeBytesRemaining < xMinimumEverFreeBytesRemaining )
+					{
+						xMinimumEverFreeBytesRemaining = xFreeBytesRemaining;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* The block is being returned - it is allocated and owned
+					by the application and has no "next" block. */
+					pxBlock->xBlockSize |= xBlockAllocatedBit;
+					pxBlock->pxNextFreeBlock = NULL;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		traceMALLOC( pvReturn, xWantedSize );
+	}
+	( void ) xTaskResumeAll();
+
+	#if( configUSE_MALLOC_FAILED_HOOK == 1 )
+	{
+		if( pvReturn == NULL )
+		{
+			extern void vApplicationMallocFailedHook( void );
+			vApplicationMallocFailedHook();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	#endif
+
+	configASSERT( ( ( ( size_t ) pvReturn ) & ( size_t ) portBYTE_ALIGNMENT_MASK ) == 0 );
+	return pvReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vPortFree( void *pv )
+{
+uint8_t *puc = ( uint8_t * ) pv;
+BlockLink_t *pxLink;
+
+	if( pv != NULL )
+	{
+		/* The memory being freed will have an BlockLink_t structure immediately
+		before it. */
+		puc -= xHeapStructSize;
+
+		/* This casting is to keep the compiler from issuing warnings. */
+		pxLink = ( void * ) puc;
+
+		/* Check the block is actually allocated. */
+		configASSERT( ( pxLink->xBlockSize & xBlockAllocatedBit ) != 0 );
+		configASSERT( pxLink->pxNextFreeBlock == NULL );
+
+		if( ( pxLink->xBlockSize & xBlockAllocatedBit ) != 0 )
+		{
+			if( pxLink->pxNextFreeBlock == NULL )
+			{
+				/* The block is being returned to the heap - it is no longer
+				allocated. */
+				pxLink->xBlockSize &= ~xBlockAllocatedBit;
+
+				vTaskSuspendAll();
+				{
+					/* Add this block to the list of free blocks. */
+					xFreeBytesRemaining += pxLink->xBlockSize;
+					traceFREE( pv, pxLink->xBlockSize );
+					prvInsertBlockIntoFreeList( ( ( BlockLink_t * ) pxLink ) );
+				}
+				( void ) xTaskResumeAll();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+size_t xPortGetFreeHeapSize( void )
+{
+	return xFreeBytesRemaining;
+}
+/*-----------------------------------------------------------*/
+
+size_t xPortGetMinimumEverFreeHeapSize( void )
+{
+	return xMinimumEverFreeBytesRemaining;
+}
+/*-----------------------------------------------------------*/
+
+void vPortInitialiseBlocks( void )
+{
+	/* This just exists to keep the linker quiet. */
+}
+/*-----------------------------------------------------------*/
+
+static void prvHeapInit( void )
+{
+BlockLink_t *pxFirstFreeBlock;
+uint8_t *pucAlignedHeap;
+size_t uxAddress;
+size_t xTotalHeapSize = configTOTAL_HEAP_SIZE;
+
+	/* Ensure the heap starts on a correctly aligned boundary. */
+	uxAddress = ( size_t ) ucHeap;
+
+	if( ( uxAddress & portBYTE_ALIGNMENT_MASK ) != 0 )
+	{
+		uxAddress += ( portBYTE_ALIGNMENT - 1 );
+		uxAddress &= ~( ( size_t ) portBYTE_ALIGNMENT_MASK );
+		xTotalHeapSize -= uxAddress - ( size_t ) ucHeap;
+	}
+
+	pucAlignedHeap = ( uint8_t * ) uxAddress;
+
+	/* xStart is used to hold a pointer to the first item in the list of free
+	blocks.  The void cast is used to prevent compiler warnings. */
+	xStart.pxNextFreeBlock = ( void * ) pucAlignedHeap;
+	xStart.xBlockSize = ( size_t ) 0;
+
+	/* pxEnd is used to mark the end of the list of free blocks and is inserted
+	at the end of the heap space. */
+	uxAddress = ( ( size_t ) pucAlignedHeap ) + xTotalHeapSize;
+	uxAddress -= xHeapStructSize;
+	uxAddress &= ~( ( size_t ) portBYTE_ALIGNMENT_MASK );
+	pxEnd = ( void * ) uxAddress;
+	pxEnd->xBlockSize = 0;
+	pxEnd->pxNextFreeBlock = NULL;
+
+	/* To start with there is a single free block that is sized to take up the
+	entire heap space, minus the space taken by pxEnd. */
+	pxFirstFreeBlock = ( void * ) pucAlignedHeap;
+	pxFirstFreeBlock->xBlockSize = uxAddress - ( size_t ) pxFirstFreeBlock;
+	pxFirstFreeBlock->pxNextFreeBlock = pxEnd;
+
+	/* Only one block exists - and it covers the entire usable heap space. */
+	xMinimumEverFreeBytesRemaining = pxFirstFreeBlock->xBlockSize;
+	xFreeBytesRemaining = pxFirstFreeBlock->xBlockSize;
+
+	/* Work out the position of the top bit in a size_t variable. */
+	xBlockAllocatedBit = ( ( size_t ) 1 ) << ( ( sizeof( size_t ) * heapBITS_PER_BYTE ) - 1 );
+}
+/*-----------------------------------------------------------*/
+
+static void prvInsertBlockIntoFreeList( BlockLink_t *pxBlockToInsert )
+{
+BlockLink_t *pxIterator;
+uint8_t *puc;
+
+	/* Iterate through the list until a block is found that has a higher address
+	than the block being inserted. */
+	for( pxIterator = &xStart; pxIterator->pxNextFreeBlock < pxBlockToInsert; pxIterator = pxIterator->pxNextFreeBlock )
+	{
+		/* Nothing to do here, just iterate to the right position. */
+	}
+
+	/* Do the block being inserted, and the block it is being inserted after
+	make a contiguous block of memory? */
+	puc = ( uint8_t * ) pxIterator;
+	if( ( puc + pxIterator->xBlockSize ) == ( uint8_t * ) pxBlockToInsert )
+	{
+		pxIterator->xBlockSize += pxBlockToInsert->xBlockSize;
+		pxBlockToInsert = pxIterator;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	/* Do the block being inserted, and the block it is being inserted before
+	make a contiguous block of memory? */
+	puc = ( uint8_t * ) pxBlockToInsert;
+	if( ( puc + pxBlockToInsert->xBlockSize ) == ( uint8_t * ) pxIterator->pxNextFreeBlock )
+	{
+		if( pxIterator->pxNextFreeBlock != pxEnd )
+		{
+			/* Form one big block from the two blocks. */
+			pxBlockToInsert->xBlockSize += pxIterator->pxNextFreeBlock->xBlockSize;
+			pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock->pxNextFreeBlock;
+		}
+		else
+		{
+			pxBlockToInsert->pxNextFreeBlock = pxEnd;
+		}
+	}
+	else
+	{
+		pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock;
+	}
+
+	/* If the block being inserted plugged a gab, so was merged with the block
+	before and the block after, then it's pxNextFreeBlock pointer will have
+	already been set, and should not be set here as that would make it point
+	to itself. */
+	if( pxIterator != pxBlockToInsert )
+	{
+		pxIterator->pxNextFreeBlock = pxBlockToInsert;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+}
+
diff --git a/Program/XLLC/FreeRTOS/portable/MemMang/heap_5.c b/Program/XLLC/FreeRTOS/portable/MemMang/heap_5.c
new file mode 100644
index 0000000000000000000000000000000000000000..8ac661e73e4e267d0145908b2e312c0634dfe2a6
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/MemMang/heap_5.c
@@ -0,0 +1,527 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+/*
+ * A sample implementation of pvPortMalloc() that allows the heap to be defined
+ * across multiple non-contigous blocks and combines (coalescences) adjacent
+ * memory blocks as they are freed.
+ *
+ * See heap_1.c, heap_2.c, heap_3.c and heap_4.c for alternative
+ * implementations, and the memory management pages of http://www.FreeRTOS.org
+ * for more information.
+ *
+ * Usage notes:
+ *
+ * vPortDefineHeapRegions() ***must*** be called before pvPortMalloc().
+ * pvPortMalloc() will be called if any task objects (tasks, queues, event
+ * groups, etc.) are created, therefore vPortDefineHeapRegions() ***must*** be
+ * called before any other objects are defined.
+ *
+ * vPortDefineHeapRegions() takes a single parameter.  The parameter is an array
+ * of HeapRegion_t structures.  HeapRegion_t is defined in portable.h as
+ *
+ * typedef struct HeapRegion
+ * {
+ *	uint8_t *pucStartAddress; << Start address of a block of memory that will be part of the heap.
+ *	size_t xSizeInBytes;	  << Size of the block of memory.
+ * } HeapRegion_t;
+ *
+ * The array is terminated using a NULL zero sized region definition, and the
+ * memory regions defined in the array ***must*** appear in address order from
+ * low address to high address.  So the following is a valid example of how
+ * to use the function.
+ *
+ * HeapRegion_t xHeapRegions[] =
+ * {
+ * 	{ ( uint8_t * ) 0x80000000UL, 0x10000 }, << Defines a block of 0x10000 bytes starting at address 0x80000000
+ * 	{ ( uint8_t * ) 0x90000000UL, 0xa0000 }, << Defines a block of 0xa0000 bytes starting at address of 0x90000000
+ * 	{ NULL, 0 }                << Terminates the array.
+ * };
+ *
+ * vPortDefineHeapRegions( xHeapRegions ); << Pass the array into vPortDefineHeapRegions().
+ *
+ * Note 0x80000000 is the lower address so appears in the array first.
+ *
+ */
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 0 )
+	#error This file must not be used if configSUPPORT_DYNAMIC_ALLOCATION is 0
+#endif
+
+/* Block sizes must not get too small. */
+#define heapMINIMUM_BLOCK_SIZE	( ( size_t ) ( xHeapStructSize << 1 ) )
+
+/* Assumes 8bit bytes! */
+#define heapBITS_PER_BYTE		( ( size_t ) 8 )
+
+/* Define the linked list structure.  This is used to link free blocks in order
+of their memory address. */
+typedef struct A_BLOCK_LINK
+{
+	struct A_BLOCK_LINK *pxNextFreeBlock;	/*<< The next free block in the list. */
+	size_t xBlockSize;						/*<< The size of the free block. */
+} BlockLink_t;
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Inserts a block of memory that is being freed into the correct position in
+ * the list of free memory blocks.  The block being freed will be merged with
+ * the block in front it and/or the block behind it if the memory blocks are
+ * adjacent to each other.
+ */
+static void prvInsertBlockIntoFreeList( BlockLink_t *pxBlockToInsert );
+
+/*-----------------------------------------------------------*/
+
+/* The size of the structure placed at the beginning of each allocated memory
+block must by correctly byte aligned. */
+static const size_t xHeapStructSize	= ( sizeof( BlockLink_t ) + ( ( size_t ) ( portBYTE_ALIGNMENT - 1 ) ) ) & ~( ( size_t ) portBYTE_ALIGNMENT_MASK );
+
+/* Create a couple of list links to mark the start and end of the list. */
+static BlockLink_t xStart, *pxEnd = NULL;
+
+/* Keeps track of the number of free bytes remaining, but says nothing about
+fragmentation. */
+static size_t xFreeBytesRemaining = 0U;
+static size_t xMinimumEverFreeBytesRemaining = 0U;
+
+/* Gets set to the top bit of an size_t type.  When this bit in the xBlockSize
+member of an BlockLink_t structure is set then the block belongs to the
+application.  When the bit is free the block is still part of the free heap
+space. */
+static size_t xBlockAllocatedBit = 0;
+
+/*-----------------------------------------------------------*/
+
+void *pvPortMalloc( size_t xWantedSize )
+{
+BlockLink_t *pxBlock, *pxPreviousBlock, *pxNewBlockLink;
+void *pvReturn = NULL;
+
+	/* The heap must be initialised before the first call to
+	prvPortMalloc(). */
+	configASSERT( pxEnd );
+
+	vTaskSuspendAll();
+	{
+		/* Check the requested block size is not so large that the top bit is
+		set.  The top bit of the block size member of the BlockLink_t structure
+		is used to determine who owns the block - the application or the
+		kernel, so it must be free. */
+		if( ( xWantedSize & xBlockAllocatedBit ) == 0 )
+		{
+			/* The wanted size is increased so it can contain a BlockLink_t
+			structure in addition to the requested amount of bytes. */
+			if( xWantedSize > 0 )
+			{
+				xWantedSize += xHeapStructSize;
+
+				/* Ensure that blocks are always aligned to the required number
+				of bytes. */
+				if( ( xWantedSize & portBYTE_ALIGNMENT_MASK ) != 0x00 )
+				{
+					/* Byte alignment required. */
+					xWantedSize += ( portBYTE_ALIGNMENT - ( xWantedSize & portBYTE_ALIGNMENT_MASK ) );
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			if( ( xWantedSize > 0 ) && ( xWantedSize <= xFreeBytesRemaining ) )
+			{
+				/* Traverse the list from the start	(lowest address) block until
+				one	of adequate size is found. */
+				pxPreviousBlock = &xStart;
+				pxBlock = xStart.pxNextFreeBlock;
+				while( ( pxBlock->xBlockSize < xWantedSize ) && ( pxBlock->pxNextFreeBlock != NULL ) )
+				{
+					pxPreviousBlock = pxBlock;
+					pxBlock = pxBlock->pxNextFreeBlock;
+				}
+
+				/* If the end marker was reached then a block of adequate size
+				was	not found. */
+				if( pxBlock != pxEnd )
+				{
+					/* Return the memory space pointed to - jumping over the
+					BlockLink_t structure at its start. */
+					pvReturn = ( void * ) ( ( ( uint8_t * ) pxPreviousBlock->pxNextFreeBlock ) + xHeapStructSize );
+
+					/* This block is being returned for use so must be taken out
+					of the list of free blocks. */
+					pxPreviousBlock->pxNextFreeBlock = pxBlock->pxNextFreeBlock;
+
+					/* If the block is larger than required it can be split into
+					two. */
+					if( ( pxBlock->xBlockSize - xWantedSize ) > heapMINIMUM_BLOCK_SIZE )
+					{
+						/* This block is to be split into two.  Create a new
+						block following the number of bytes requested. The void
+						cast is used to prevent byte alignment warnings from the
+						compiler. */
+						pxNewBlockLink = ( void * ) ( ( ( uint8_t * ) pxBlock ) + xWantedSize );
+
+						/* Calculate the sizes of two blocks split from the
+						single block. */
+						pxNewBlockLink->xBlockSize = pxBlock->xBlockSize - xWantedSize;
+						pxBlock->xBlockSize = xWantedSize;
+
+						/* Insert the new block into the list of free blocks. */
+						prvInsertBlockIntoFreeList( ( pxNewBlockLink ) );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					xFreeBytesRemaining -= pxBlock->xBlockSize;
+
+					if( xFreeBytesRemaining < xMinimumEverFreeBytesRemaining )
+					{
+						xMinimumEverFreeBytesRemaining = xFreeBytesRemaining;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* The block is being returned - it is allocated and owned
+					by the application and has no "next" block. */
+					pxBlock->xBlockSize |= xBlockAllocatedBit;
+					pxBlock->pxNextFreeBlock = NULL;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		traceMALLOC( pvReturn, xWantedSize );
+	}
+	( void ) xTaskResumeAll();
+
+	#if( configUSE_MALLOC_FAILED_HOOK == 1 )
+	{
+		if( pvReturn == NULL )
+		{
+			extern void vApplicationMallocFailedHook( void );
+			vApplicationMallocFailedHook();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	#endif
+
+	return pvReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vPortFree( void *pv )
+{
+uint8_t *puc = ( uint8_t * ) pv;
+BlockLink_t *pxLink;
+
+	if( pv != NULL )
+	{
+		/* The memory being freed will have an BlockLink_t structure immediately
+		before it. */
+		puc -= xHeapStructSize;
+
+		/* This casting is to keep the compiler from issuing warnings. */
+		pxLink = ( void * ) puc;
+
+		/* Check the block is actually allocated. */
+		configASSERT( ( pxLink->xBlockSize & xBlockAllocatedBit ) != 0 );
+		configASSERT( pxLink->pxNextFreeBlock == NULL );
+
+		if( ( pxLink->xBlockSize & xBlockAllocatedBit ) != 0 )
+		{
+			if( pxLink->pxNextFreeBlock == NULL )
+			{
+				/* The block is being returned to the heap - it is no longer
+				allocated. */
+				pxLink->xBlockSize &= ~xBlockAllocatedBit;
+
+				vTaskSuspendAll();
+				{
+					/* Add this block to the list of free blocks. */
+					xFreeBytesRemaining += pxLink->xBlockSize;
+					traceFREE( pv, pxLink->xBlockSize );
+					prvInsertBlockIntoFreeList( ( ( BlockLink_t * ) pxLink ) );
+				}
+				( void ) xTaskResumeAll();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+size_t xPortGetFreeHeapSize( void )
+{
+	return xFreeBytesRemaining;
+}
+/*-----------------------------------------------------------*/
+
+size_t xPortGetMinimumEverFreeHeapSize( void )
+{
+	return xMinimumEverFreeBytesRemaining;
+}
+/*-----------------------------------------------------------*/
+
+static void prvInsertBlockIntoFreeList( BlockLink_t *pxBlockToInsert )
+{
+BlockLink_t *pxIterator;
+uint8_t *puc;
+
+	/* Iterate through the list until a block is found that has a higher address
+	than the block being inserted. */
+	for( pxIterator = &xStart; pxIterator->pxNextFreeBlock < pxBlockToInsert; pxIterator = pxIterator->pxNextFreeBlock )
+	{
+		/* Nothing to do here, just iterate to the right position. */
+	}
+
+	/* Do the block being inserted, and the block it is being inserted after
+	make a contiguous block of memory? */
+	puc = ( uint8_t * ) pxIterator;
+	if( ( puc + pxIterator->xBlockSize ) == ( uint8_t * ) pxBlockToInsert )
+	{
+		pxIterator->xBlockSize += pxBlockToInsert->xBlockSize;
+		pxBlockToInsert = pxIterator;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	/* Do the block being inserted, and the block it is being inserted before
+	make a contiguous block of memory? */
+	puc = ( uint8_t * ) pxBlockToInsert;
+	if( ( puc + pxBlockToInsert->xBlockSize ) == ( uint8_t * ) pxIterator->pxNextFreeBlock )
+	{
+		if( pxIterator->pxNextFreeBlock != pxEnd )
+		{
+			/* Form one big block from the two blocks. */
+			pxBlockToInsert->xBlockSize += pxIterator->pxNextFreeBlock->xBlockSize;
+			pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock->pxNextFreeBlock;
+		}
+		else
+		{
+			pxBlockToInsert->pxNextFreeBlock = pxEnd;
+		}
+	}
+	else
+	{
+		pxBlockToInsert->pxNextFreeBlock = pxIterator->pxNextFreeBlock;
+	}
+
+	/* If the block being inserted plugged a gab, so was merged with the block
+	before and the block after, then it's pxNextFreeBlock pointer will have
+	already been set, and should not be set here as that would make it point
+	to itself. */
+	if( pxIterator != pxBlockToInsert )
+	{
+		pxIterator->pxNextFreeBlock = pxBlockToInsert;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+}
+/*-----------------------------------------------------------*/
+
+void vPortDefineHeapRegions( const HeapRegion_t * const pxHeapRegions )
+{
+BlockLink_t *pxFirstFreeBlockInRegion = NULL, *pxPreviousFreeBlock;
+size_t xAlignedHeap;
+size_t xTotalRegionSize, xTotalHeapSize = 0;
+BaseType_t xDefinedRegions = 0;
+size_t xAddress;
+const HeapRegion_t *pxHeapRegion;
+
+	/* Can only call once! */
+	configASSERT( pxEnd == NULL );
+
+	pxHeapRegion = &( pxHeapRegions[ xDefinedRegions ] );
+
+	while( pxHeapRegion->xSizeInBytes > 0 )
+	{
+		xTotalRegionSize = pxHeapRegion->xSizeInBytes;
+
+		/* Ensure the heap region starts on a correctly aligned boundary. */
+		xAddress = ( size_t ) pxHeapRegion->pucStartAddress;
+		if( ( xAddress & portBYTE_ALIGNMENT_MASK ) != 0 )
+		{
+			xAddress += ( portBYTE_ALIGNMENT - 1 );
+			xAddress &= ~portBYTE_ALIGNMENT_MASK;
+
+			/* Adjust the size for the bytes lost to alignment. */
+			xTotalRegionSize -= xAddress - ( size_t ) pxHeapRegion->pucStartAddress;
+		}
+
+		xAlignedHeap = xAddress;
+
+		/* Set xStart if it has not already been set. */
+		if( xDefinedRegions == 0 )
+		{
+			/* xStart is used to hold a pointer to the first item in the list of
+			free blocks.  The void cast is used to prevent compiler warnings. */
+			xStart.pxNextFreeBlock = ( BlockLink_t * ) xAlignedHeap;
+			xStart.xBlockSize = ( size_t ) 0;
+		}
+		else
+		{
+			/* Should only get here if one region has already been added to the
+			heap. */
+			configASSERT( pxEnd != NULL );
+
+			/* Check blocks are passed in with increasing start addresses. */
+			configASSERT( xAddress > ( size_t ) pxEnd );
+		}
+
+		/* Remember the location of the end marker in the previous region, if
+		any. */
+		pxPreviousFreeBlock = pxEnd;
+
+		/* pxEnd is used to mark the end of the list of free blocks and is
+		inserted at the end of the region space. */
+		xAddress = xAlignedHeap + xTotalRegionSize;
+		xAddress -= xHeapStructSize;
+		xAddress &= ~portBYTE_ALIGNMENT_MASK;
+		pxEnd = ( BlockLink_t * ) xAddress;
+		pxEnd->xBlockSize = 0;
+		pxEnd->pxNextFreeBlock = NULL;
+
+		/* To start with there is a single free block in this region that is
+		sized to take up the entire heap region minus the space taken by the
+		free block structure. */
+		pxFirstFreeBlockInRegion = ( BlockLink_t * ) xAlignedHeap;
+		pxFirstFreeBlockInRegion->xBlockSize = xAddress - ( size_t ) pxFirstFreeBlockInRegion;
+		pxFirstFreeBlockInRegion->pxNextFreeBlock = pxEnd;
+
+		/* If this is not the first region that makes up the entire heap space
+		then link the previous region to this region. */
+		if( pxPreviousFreeBlock != NULL )
+		{
+			pxPreviousFreeBlock->pxNextFreeBlock = pxFirstFreeBlockInRegion;
+		}
+
+		xTotalHeapSize += pxFirstFreeBlockInRegion->xBlockSize;
+
+		/* Move onto the next HeapRegion_t structure. */
+		xDefinedRegions++;
+		pxHeapRegion = &( pxHeapRegions[ xDefinedRegions ] );
+	}
+
+	xMinimumEverFreeBytesRemaining = xTotalHeapSize;
+	xFreeBytesRemaining = xTotalHeapSize;
+
+	/* Check something was actually defined before it is accessed. */
+	configASSERT( xTotalHeapSize );
+
+	/* Work out the position of the top bit in a size_t variable. */
+	xBlockAllocatedBit = ( ( size_t ) 1 ) << ( ( sizeof( size_t ) * heapBITS_PER_BYTE ) - 1 );
+}
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/port.c b/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/port.c
new file mode 100644
index 0000000000000000000000000000000000000000..e8d05e49d07e76d57a6b313f271eeb270b23bd84
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/port.c
@@ -0,0 +1,333 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+
+/* Standard includes. */
+#include 
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* Constants required to setup the initial task context. */
+#define portINITIAL_SPSR				( ( StackType_t ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */
+#define portTHUMB_MODE_BIT				( ( StackType_t ) 0x20 )
+#define portINSTRUCTION_SIZE			( ( StackType_t ) 4 )
+#define portNO_CRITICAL_SECTION_NESTING	( ( StackType_t ) 0 )
+
+/* Constants required to setup the tick ISR. */
+#define portENABLE_TIMER			( ( uint8_t ) 0x01 )
+#define portPRESCALE_VALUE			0x00
+#define portINTERRUPT_ON_MATCH		( ( uint32_t ) 0x01 )
+#define portRESET_COUNT_ON_MATCH	( ( uint32_t ) 0x02 )
+
+/* Constants required to setup the VIC for the tick ISR. */
+#define portTIMER_VIC_CHANNEL		( ( uint32_t ) 0x0004 )
+#define portTIMER_VIC_CHANNEL_BIT	( ( uint32_t ) 0x0010 )
+#define portTIMER_VIC_ENABLE		( ( uint32_t ) 0x0020 )
+
+/* Constants required to handle interrupts. */
+#define portTIMER_MATCH_ISR_BIT		( ( uint8_t ) 0x01 )
+#define portCLEAR_VIC_INTERRUPT		( ( uint32_t ) 0 )
+
+/*-----------------------------------------------------------*/
+
+/* The code generated by the Keil compiler does not maintain separate
+stack and frame pointers. The portENTER_CRITICAL macro cannot therefore
+use the stack as per other ports.  Instead a variable is used to keep
+track of the critical section nesting.  This variable has to be stored
+as part of the task context and must be initialised to a non zero value. */
+
+#define portNO_CRITICAL_NESTING		( ( uint32_t ) 0 )
+volatile uint32_t ulCriticalNesting = 9999UL;
+
+/*-----------------------------------------------------------*/
+
+/* Setup the timer to generate the tick interrupts. */
+static void prvSetupTimerInterrupt( void );
+
+/* 
+ * The scheduler can only be started from ARM mode, so 
+ * vPortStartFirstSTask() is defined in portISR.c. 
+ */
+extern __asm void vPortStartFirstTask( void );
+
+/*-----------------------------------------------------------*/
+
+/* 
+ * See header file for description. 
+ */
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
+{
+StackType_t *pxOriginalTOS;
+
+	/* Setup the initial stack of the task.  The stack is set exactly as 
+	expected by the portRESTORE_CONTEXT() macro.
+
+	Remember where the top of the (simulated) stack is before we place 
+	anything on it. */
+	pxOriginalTOS = pxTopOfStack;
+	
+	/* To ensure asserts in tasks.c don't fail, although in this case the assert
+	is not really required. */
+	pxTopOfStack--;
+
+	/* First on the stack is the return address - which in this case is the
+	start of the task.  The offset is added to make the return address appear
+	as it would within an IRQ ISR. */
+	*pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE;		
+	pxTopOfStack--;
+
+	*pxTopOfStack = ( StackType_t ) 0xaaaaaaaa;	/* R14 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x12121212;	/* R12 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) 0x11111111;	/* R11 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) 0x10101010;	/* R10 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) 0x09090909;	/* R9 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) 0x08080808;	/* R8 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) 0x07070707;	/* R7 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) 0x06060606;	/* R6 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) 0x05050505;	/* R5 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) 0x04040404;	/* R4 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) 0x03030303;	/* R3 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) 0x02020202;	/* R2 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) 0x01010101;	/* R1 */
+	pxTopOfStack--;	
+	*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
+	pxTopOfStack--;
+
+	/* The last thing onto the stack is the status register, which is set for
+	system mode, with interrupts enabled. */
+	*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
+
+	if( ( ( uint32_t ) pxCode & 0x01UL ) != 0x00UL )
+	{
+		/* We want the task to start in thumb mode. */
+		*pxTopOfStack |= portTHUMB_MODE_BIT;
+	}
+
+	pxTopOfStack--;
+
+	/* The code generated by the Keil compiler does not maintain separate
+	stack and frame pointers. The portENTER_CRITICAL macro cannot therefore
+	use the stack as per other ports.  Instead a variable is used to keep
+	track of the critical section nesting.  This variable has to be stored
+	as part of the task context and is initially set to zero. */
+	*pxTopOfStack = portNO_CRITICAL_SECTION_NESTING;
+
+	return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xPortStartScheduler( void )
+{
+	/* Start the timer that generates the tick ISR. */
+	prvSetupTimerInterrupt();
+
+	/* Start the first task.  This is done from portISR.c as ARM mode must be
+	used. */
+	vPortStartFirstTask();
+
+	/* Should not get here! */
+	return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void )
+{
+	/* It is unlikely that the ARM port will require this function as there
+	is nothing to return to.  If this is required - stop the tick ISR then
+	return back to main. */
+}
+/*-----------------------------------------------------------*/
+
+#if configUSE_PREEMPTION == 0
+
+	/* 
+	 * The cooperative scheduler requires a normal IRQ service routine to 
+	 * simply increment the system tick. 
+	 */
+	void vNonPreemptiveTick( void ) __irq;
+	void vNonPreemptiveTick( void ) __irq
+	{
+		/* Increment the tick count - this may make a delaying task ready
+		to run - but a context switch is not performed. */		
+		xTaskIncrementTick();
+
+		T0IR = portTIMER_MATCH_ISR_BIT;				/* Clear the timer event */
+		VICVectAddr = portCLEAR_VIC_INTERRUPT;		/* Acknowledge the Interrupt */
+	}
+
+ #else
+
+	/*
+	 **************************************************************************
+	 * The preemptive scheduler ISR is written in assembler and can be found   
+	 * in the portASM.s file. This will only get used if portUSE_PREEMPTION
+	 * is set to 1 in portmacro.h
+	 ************************************************************************** 
+	 */
+
+	  void vPreemptiveTick( void );
+
+#endif
+/*-----------------------------------------------------------*/
+
+static void prvSetupTimerInterrupt( void )
+{
+uint32_t ulCompareMatch;
+
+	/* A 1ms tick does not require the use of the timer prescale.  This is
+	defaulted to zero but can be used if necessary. */
+	T0PR = portPRESCALE_VALUE;
+
+	/* Calculate the match value required for our wanted tick rate. */
+	ulCompareMatch = configCPU_CLOCK_HZ / configTICK_RATE_HZ;
+
+	/* Protect against divide by zero.  Using an if() statement still results
+	in a warning - hence the #if. */
+	#if portPRESCALE_VALUE != 0
+	{
+		ulCompareMatch /= ( portPRESCALE_VALUE + 1 );
+	}
+	#endif
+
+	T0MR0 = ulCompareMatch;
+
+	/* Generate tick with timer 0 compare match. */
+	T0MCR = portRESET_COUNT_ON_MATCH | portINTERRUPT_ON_MATCH;
+
+	/* Setup the VIC for the timer. */
+	VICIntSelect &= ~( portTIMER_VIC_CHANNEL_BIT );
+	VICIntEnable |= portTIMER_VIC_CHANNEL_BIT;
+	
+	/* The ISR installed depends on whether the preemptive or cooperative
+	scheduler is being used. */
+	#if configUSE_PREEMPTION == 1
+	{	
+		VICVectAddr0 = ( uint32_t ) vPreemptiveTick;
+	}
+	#else
+	{
+		VICVectAddr0 = ( uint32_t ) vNonPreemptiveTick;
+	}
+	#endif
+
+	VICVectCntl0 = portTIMER_VIC_CHANNEL | portTIMER_VIC_ENABLE;
+
+	/* Start the timer - interrupts are disabled when this function is called
+	so it is okay to do this here. */
+	T0TCR = portENABLE_TIMER;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void )
+{
+	/* Disable interrupts as per portDISABLE_INTERRUPTS(); 							*/
+	__disable_irq();
+
+	/* Now interrupts are disabled ulCriticalNesting can be accessed 
+	directly.  Increment ulCriticalNesting to keep a count of how many times
+	portENTER_CRITICAL() has been called. */
+	ulCriticalNesting++;
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void )
+{
+	if( ulCriticalNesting > portNO_CRITICAL_NESTING )
+	{
+		/* Decrement the nesting count as we are leaving a critical section. */
+		ulCriticalNesting--;
+
+		/* If the nesting level has reached zero then interrupts should be
+		re-enabled. */
+		if( ulCriticalNesting == portNO_CRITICAL_NESTING )
+		{
+			/* Enable interrupts as per portEXIT_CRITICAL(). */
+			__enable_irq();
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/portASM.s b/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/portASM.s
new file mode 100644
index 0000000000000000000000000000000000000000..1a588d1174005ae64d8c91b0c37948609bdb65cd
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/portASM.s
@@ -0,0 +1,151 @@
+;/*
+;    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+;    All rights reserved
+;	
+;
+;    ***************************************************************************
+;     *                                                                       *
+;     *    FreeRTOS tutorial books are available in pdf and paperback.        *
+;     *    Complete, revised, and edited pdf reference manuals are also       *
+;     *    available.                                                         *
+;     *                                                                       *
+;     *    Purchasing FreeRTOS documentation will not only help you, by       *
+;     *    ensuring you get running as quickly as possible and with an        *
+;     *    in-depth knowledge of how to use FreeRTOS, it will also help       *
+;     *    the FreeRTOS project to continue with its mission of providing     *
+;     *    professional grade, cross platform, de facto standard solutions    *
+;     *    for microcontrollers - completely free of charge!                  *
+;     *                                                                       *
+;     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *
+;     *                                                                       *
+;     *    Thank you for using FreeRTOS, and thank you for your support!      *
+;     *                                                                       *
+;    ***************************************************************************
+;
+;
+;    This file is part of the FreeRTOS distribution.
+;
+;    FreeRTOS is free software; you can redistribute it and/or modify it under
+;    the terms of the GNU General Public License (version 2) as published by the
+;    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+;    >>>NOTE<<< The modification to the GPL is included to allow you to
+;    distribute a combined work that includes FreeRTOS without being obliged to
+;    provide the source code for proprietary components outside of the FreeRTOS
+;    kernel.  FreeRTOS is distributed in the hope that it will be useful, but
+;    WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+;    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+;    more details. You should have received a copy of the GNU General Public
+;    License and the FreeRTOS license exception along with FreeRTOS; if not it
+;    can be viewed here: http://www.freertos.org/a00114.html and also obtained
+;    by writing to Richard Barry, contact details for whom are available on the
+;    FreeRTOS WEB site.
+;
+;    1 tab == 4 spaces!
+;
+;    http://www.FreeRTOS.org - Documentation, latest information, license and
+;    contact details.
+;
+;    http://www.SafeRTOS.com - A version that is certified for use in safety
+;    critical systems.
+;
+;    http://www.OpenRTOS.com - Commercial support, development, porting,
+;    licensing and training services.
+;*/
+
+	INCLUDE portmacro.inc
+
+	IMPORT	vTaskSwitchContext
+	IMPORT	xTaskIncrementTick
+
+	EXPORT	vPortYieldProcessor
+	EXPORT	vPortStartFirstTask
+	EXPORT	vPreemptiveTick
+	EXPORT	vPortYield
+
+
+VICVECTADDR	EQU	0xFFFFF030
+T0IR		EQU	0xE0004000
+T0MATCHBIT	EQU	0x00000001
+
+	ARM
+	AREA	PORT_ASM, CODE, READONLY
+
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Starting the first task is done by just restoring the context 
+; setup by pxPortInitialiseStack
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+vPortStartFirstTask
+
+	PRESERVE8
+
+	portRESTORE_CONTEXT
+
+vPortYield
+
+	PRESERVE8
+
+	SVC 0
+	bx lr
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Interrupt service routine for the SWI interrupt.  The vector table is
+; configured in the startup.s file.
+;
+; vPortYieldProcessor() is used to manually force a context switch.  The
+; SWI interrupt is generated by a call to taskYIELD() or portYIELD().
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+vPortYieldProcessor
+
+	PRESERVE8
+
+	; Within an IRQ ISR the link register has an offset from the true return 
+	; address, but an SWI ISR does not.  Add the offset manually so the same 
+	; ISR return code can be used in both cases.
+	ADD	LR, LR, #4
+
+	; Perform the context switch.
+	portSAVE_CONTEXT					; Save current task context				
+	LDR R0, =vTaskSwitchContext			; Get the address of the context switch function
+	MOV LR, PC							; Store the return address
+	BX	R0								; Call the contedxt switch function
+	portRESTORE_CONTEXT					; restore the context of the selected task	
+
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Interrupt service routine for preemptive scheduler tick timer
+; Only used if portUSE_PREEMPTION is set to 1 in portmacro.h
+;
+; Uses timer 0 of LPC21XX Family
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;	
+
+vPreemptiveTick
+
+	PRESERVE8
+
+	portSAVE_CONTEXT					; Save the context of the current task.	
+
+	LDR R0, =xTaskIncrementTick			; Increment the tick count.  
+	MOV LR, PC							; This may make a delayed task ready
+	BX R0								; to run.
+
+	CMP R0, #0
+	BEQ SkipContextSwitch
+	LDR R0, =vTaskSwitchContext			; Find the highest priority task that 
+	MOV LR, PC							; is ready to run.
+	BX R0
+SkipContextSwitch
+	MOV R0, #T0MATCHBIT					; Clear the timer event
+	LDR R1, =T0IR
+	STR R0, [R1] 
+
+	LDR	R0, =VICVECTADDR				; Acknowledge the interrupt	
+	STR	R0,[R0]
+
+	portRESTORE_CONTEXT					; Restore the context of the highest 
+										; priority task that is ready to run.
+	END
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/portmacro.h b/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/portmacro.h
new file mode 100644
index 0000000000000000000000000000000000000000..d667596a0ae94187442629d6c552b27f8005a71a
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/portmacro.h
@@ -0,0 +1,188 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+#define portCHAR		char
+#define portFLOAT		float
+#define portDOUBLE		double
+#define portLONG		long
+#define portSHORT		short
+#define portSTACK_TYPE	uint32_t
+#define portBASE_TYPE	long
+
+typedef portSTACK_TYPE StackType_t;
+typedef long BaseType_t;
+typedef unsigned long UBaseType_t;
+
+
+#if( configUSE_16_BIT_TICKS == 1 )
+	typedef uint16_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffff
+#else
+	typedef uint32_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+#endif
+/*-----------------------------------------------------------*/
+
+/* Hardware specifics. */
+#define portSTACK_GROWTH			( -1 )
+#define portTICK_PERIOD_MS			( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+#define portBYTE_ALIGNMENT			8
+/*-----------------------------------------------------------*/
+
+/* Task utilities. */
+
+/*-----------------------------------------------------------
+ * ISR entry and exit macros.  These are only required if a task switch
+ * is required from an ISR.
+ *----------------------------------------------------------*/
+
+/* If a switch is required then we just need to call */
+/* vTaskSwitchContext() as the context has already been */
+/* saved. */
+
+#define portEXIT_SWITCHING_ISR(SwitchRequired)				 \
+{															 \
+extern void vTaskSwitchContext(void);						 \
+															 \
+		if(SwitchRequired)									 \
+		{													 \
+			vTaskSwitchContext();							 \
+		}													 \
+}															 \
+
+extern void vPortYield( void );
+#define portYIELD() vPortYield()
+
+
+/* Critical section management. */
+
+/*
+ ******************************************************************
+ * We don't need to worry about whether we're in ARM or
+ * THUMB mode with the Keil Real View compiler when enabling
+ * or disabling interrupts as the compiler's intrinsic functions
+ * take care of that for us.
+ *******************************************************************
+ */
+#define portDISABLE_INTERRUPTS()	__disable_irq()
+#define portENABLE_INTERRUPTS()		__enable_irq()
+
+
+/*-----------------------------------------------------------
+ * Critical section control
+ *
+ * The code generated by the Keil compiler does not maintain separate
+ * stack and frame pointers. The portENTER_CRITICAL macro cannot therefore
+ * use the stack as per other ports.  Instead a variable is used to keep
+ * track of the critical section nesting.  This necessitates the use of a
+ * function in place of the macro.
+ *----------------------------------------------------------*/
+
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+
+#define portENTER_CRITICAL()		vPortEnterCritical();
+#define portEXIT_CRITICAL()			vPortExitCritical();
+/*-----------------------------------------------------------*/
+
+/* Compiler specifics. */
+#define inline
+#define register
+#define portNOP()	__asm{ NOP }
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site. */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters )	void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters )	void vFunction( void *pvParameters )
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/portmacro.inc b/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/portmacro.inc
new file mode 100644
index 0000000000000000000000000000000000000000..37fe6dfd4a03b6168a471c6fe28c776d8357cf7d
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM7_LPC21xx/portmacro.inc
@@ -0,0 +1,118 @@
+;/*
+;    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+;    All rights reserved
+;	
+;
+;    ***************************************************************************
+;     *                                                                       *
+;     *    FreeRTOS tutorial books are available in pdf and paperback.        *
+;     *    Complete, revised, and edited pdf reference manuals are also       *
+;     *    available.                                                         *
+;     *                                                                       *
+;     *    Purchasing FreeRTOS documentation will not only help you, by       *
+;     *    ensuring you get running as quickly as possible and with an        *
+;     *    in-depth knowledge of how to use FreeRTOS, it will also help       *
+;     *    the FreeRTOS project to continue with its mission of providing     *
+;     *    professional grade, cross platform, de facto standard solutions    *
+;     *    for microcontrollers - completely free of charge!                  *
+;     *                                                                       *
+;     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *
+;     *                                                                       *
+;     *    Thank you for using FreeRTOS, and thank you for your support!      *
+;     *                                                                       *
+;    ***************************************************************************
+;
+;
+;    This file is part of the FreeRTOS distribution.
+;
+;    FreeRTOS is free software; you can redistribute it and/or modify it under
+;    the terms of the GNU General Public License (version 2) as published by the
+;    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+;    >>>NOTE<<< The modification to the GPL is included to allow you to
+;    distribute a combined work that includes FreeRTOS without being obliged to
+;    provide the source code for proprietary components outside of the FreeRTOS
+;    kernel.  FreeRTOS is distributed in the hope that it will be useful, but
+;    WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+;    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+;    more details. You should have received a copy of the GNU General Public
+;    License and the FreeRTOS license exception along with FreeRTOS; if not it
+;    can be viewed here: http://www.freertos.org/a00114.html and also obtained
+;    by writing to Richard Barry, contact details for whom are available on the
+;    FreeRTOS WEB site.
+;
+;    1 tab == 4 spaces!
+;
+;    http://www.FreeRTOS.org - Documentation, latest information, license and
+;    contact details.
+;
+;    http://www.SafeRTOS.com - A version that is certified for use in safety
+;    critical systems.
+;
+;    http://www.OpenRTOS.com - Commercial support, development, porting,
+;    licensing and training services.
+;*/
+
+	IMPORT  ulCriticalNesting		;
+	IMPORT	pxCurrentTCB			;
+
+
+	MACRO
+	portRESTORE_CONTEXT
+
+
+	LDR		R0, =pxCurrentTCB		; Set the LR to the task stack.  The location was...
+	LDR		R0, [R0]				; ... stored in pxCurrentTCB
+	LDR		LR, [R0]
+
+	LDR		R0, =ulCriticalNesting	; The critical nesting depth is the first item on... 
+	LDMFD	LR!, {R1}				; ...the stack.  Load it into the ulCriticalNesting var.
+	STR		R1, [R0]				;
+
+	LDMFD	LR!, {R0}				; Get the SPSR from the stack.
+	MSR		SPSR_cxsf, R0			;
+
+	LDMFD	LR, {R0-R14}^			; Restore all system mode registers for the task.
+	NOP								;
+
+	LDR		LR, [LR, #+60]			; Restore the return address
+
+									; And return - correcting the offset in the LR to obtain ...
+	SUBS	PC, LR, #4				; ...the correct address.
+
+	MEND
+
+; /**********************************************************************/
+
+	MACRO
+	portSAVE_CONTEXT
+
+
+	STMDB 	SP!, {R0}				; Store R0 first as we need to use it.
+
+	STMDB	SP,{SP}^				; Set R0 to point to the task stack pointer.
+	NOP								;
+	SUB		SP, SP, #4				;
+	LDMIA	SP!,{R0}				;
+
+	STMDB	R0!, {LR}				; Push the return address onto the stack.
+	MOV		LR, R0					; Now we have saved LR we can use it instead of R0.
+	LDMIA	SP!, {R0}				; Pop R0 so we can save it onto the system mode stack.
+
+	STMDB	LR,{R0-LR}^				; Push all the system mode registers onto the task stack.
+	NOP								;
+	SUB		LR, LR, #60				;
+
+	MRS		R0, SPSR				; Push the SPSR onto the task stack.
+	STMDB	LR!, {R0}				;
+
+	LDR		R0, =ulCriticalNesting	;
+	LDR		R0, [R0]				;
+	STMDB	LR!, {R0}				;
+
+	LDR		R0, =pxCurrentTCB		; Store the new top of stack for the task.
+	LDR		R1, [R0]				; 		 
+	STR		LR, [R1]				;
+	
+	MEND
+	
+	END
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/port.c b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/port.c
new file mode 100644
index 0000000000000000000000000000000000000000..10f6ae457e0ba29d5df4784d24eb91d12447b565
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/port.c
@@ -0,0 +1,522 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+/* Standard includes. */
+#include 
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+#ifndef configINTERRUPT_CONTROLLER_BASE_ADDRESS
+	#error configINTERRUPT_CONTROLLER_BASE_ADDRESS must be defined.  See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
+#endif
+
+#ifndef configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET
+	#error configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET must be defined.  See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
+#endif
+
+#ifndef configUNIQUE_INTERRUPT_PRIORITIES
+	#error configUNIQUE_INTERRUPT_PRIORITIES must be defined.  See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
+#endif
+
+#ifndef configSETUP_TICK_INTERRUPT
+	#error configSETUP_TICK_INTERRUPT() must be defined.  See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
+#endif /* configSETUP_TICK_INTERRUPT */
+
+#ifndef configMAX_API_CALL_INTERRUPT_PRIORITY
+	#error configMAX_API_CALL_INTERRUPT_PRIORITY must be defined.  See http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
+#endif
+
+#if configMAX_API_CALL_INTERRUPT_PRIORITY == 0
+	#error configMAX_API_CALL_INTERRUPT_PRIORITY must not be set to 0
+#endif
+
+#if configMAX_API_CALL_INTERRUPT_PRIORITY > configUNIQUE_INTERRUPT_PRIORITIES
+	#error configMAX_API_CALL_INTERRUPT_PRIORITY must be less than or equal to configUNIQUE_INTERRUPT_PRIORITIES as the lower the numeric priority value the higher the logical interrupt priority
+#endif
+
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
+	/* Check the configuration. */
+	#if( configMAX_PRIORITIES > 32 )
+		#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32.  It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
+	#endif
+#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
+
+/* In case security extensions are implemented. */
+#if configMAX_API_CALL_INTERRUPT_PRIORITY <= ( configUNIQUE_INTERRUPT_PRIORITIES / 2 )
+	#error configMAX_API_CALL_INTERRUPT_PRIORITY must be greater than ( configUNIQUE_INTERRUPT_PRIORITIES / 2 )
+#endif
+
+#ifndef configCLEAR_TICK_INTERRUPT
+	#define configCLEAR_TICK_INTERRUPT()
+#endif
+
+/* The number of bits to shift for an interrupt priority is dependent on the
+number of bits implemented by the interrupt controller. */
+#if configUNIQUE_INTERRUPT_PRIORITIES == 16
+	#define portPRIORITY_SHIFT 4
+	#define portMAX_BINARY_POINT_VALUE	3
+#elif configUNIQUE_INTERRUPT_PRIORITIES == 32
+	#define portPRIORITY_SHIFT 3
+	#define portMAX_BINARY_POINT_VALUE	2
+#elif configUNIQUE_INTERRUPT_PRIORITIES == 64
+	#define portPRIORITY_SHIFT 2
+	#define portMAX_BINARY_POINT_VALUE	1
+#elif configUNIQUE_INTERRUPT_PRIORITIES == 128
+	#define portPRIORITY_SHIFT 1
+	#define portMAX_BINARY_POINT_VALUE	0
+#elif configUNIQUE_INTERRUPT_PRIORITIES == 256
+	#define portPRIORITY_SHIFT 0
+	#define portMAX_BINARY_POINT_VALUE	0
+#else
+	#error Invalid configUNIQUE_INTERRUPT_PRIORITIES setting.  configUNIQUE_INTERRUPT_PRIORITIES must be set to the number of unique priorities implemented by the target hardware
+#endif
+
+/* A critical section is exited when the critical section nesting count reaches
+this value. */
+#define portNO_CRITICAL_NESTING			( ( uint32_t ) 0 )
+
+/* In all GICs 255 can be written to the priority mask register to unmask all
+(but the lowest) interrupt priority. */
+#define portUNMASK_VALUE				( 0xFFUL )
+
+/* Tasks are not created with a floating point context, but can be given a
+floating point context after they have been created.  A variable is stored as
+part of the tasks context that holds portNO_FLOATING_POINT_CONTEXT if the task
+does not have an FPU context, or any other value if the task does have an FPU
+context. */
+#define portNO_FLOATING_POINT_CONTEXT	( ( StackType_t ) 0 )
+
+/* Interrupt controller access addresses. */
+#define portICCPMR_PRIORITY_MASK_OFFSET  		( 0x04 )
+#define portICCIAR_INTERRUPT_ACKNOWLEDGE_OFFSET ( 0x0C )
+#define portICCEOIR_END_OF_INTERRUPT_OFFSET 	( 0x10 )
+#define portICCBPR_BINARY_POINT_OFFSET			( 0x08 )
+#define portICCRPR_RUNNING_PRIORITY_OFFSET		( 0x14 )
+#define portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS 		( configINTERRUPT_CONTROLLER_BASE_ADDRESS + configINTERRUPT_CONTROLLER_CPU_INTERFACE_OFFSET )
+#define portICCPMR_PRIORITY_MASK_REGISTER 					( *( ( volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCPMR_PRIORITY_MASK_OFFSET ) ) )
+#define portICCIAR_INTERRUPT_ACKNOWLEDGE_REGISTER_ADDRESS 	( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCIAR_INTERRUPT_ACKNOWLEDGE_OFFSET )
+#define portICCEOIR_END_OF_INTERRUPT_REGISTER_ADDRESS 		( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCEOIR_END_OF_INTERRUPT_OFFSET )
+#define portICCPMR_PRIORITY_MASK_REGISTER_ADDRESS 			( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCPMR_PRIORITY_MASK_OFFSET )
+#define portICCBPR_BINARY_POINT_REGISTER 					( *( ( const volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCBPR_BINARY_POINT_OFFSET ) ) )
+#define portICCRPR_RUNNING_PRIORITY_REGISTER 				( *( ( const volatile uint32_t * ) ( portINTERRUPT_CONTROLLER_CPU_INTERFACE_ADDRESS + portICCRPR_RUNNING_PRIORITY_OFFSET ) ) )
+
+/* Used by portASSERT_IF_INTERRUPT_PRIORITY_INVALID() when ensuring the binary
+point is zero. */
+#define portBINARY_POINT_BITS			( ( uint8_t ) 0x03 )
+
+/* Constants required to setup the initial task context. */
+#define portINITIAL_SPSR				( ( StackType_t ) 0x1f ) /* System mode, ARM mode, interrupts enabled. */
+#define portTHUMB_MODE_BIT				( ( StackType_t ) 0x20 )
+#define portTHUMB_MODE_ADDRESS			( 0x01UL )
+
+/* Masks all bits in the APSR other than the mode bits. */
+#define portAPSR_MODE_BITS_MASK			( 0x1F )
+
+/* The value of the mode bits in the APSR when the CPU is executing in user
+mode. */
+#define portAPSR_USER_MODE				( 0x10 )
+
+/* Macro to unmask all interrupt priorities. */
+#define portCLEAR_INTERRUPT_MASK()											\
+{																			\
+	__disable_irq();														\
+	portICCPMR_PRIORITY_MASK_REGISTER = portUNMASK_VALUE;					\
+	__asm(	"DSB		\n"													\
+			"ISB		\n" );												\
+	__enable_irq();															\
+}
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Starts the first task executing.  This function is necessarily written in
+ * assembly code so is implemented in portASM.s.
+ */
+extern void vPortRestoreTaskContext( void );
+
+/*
+ * Used to catch tasks that attempt to return from their implementing function.
+ */
+static void prvTaskExitError( void );
+
+/*-----------------------------------------------------------*/
+
+/* A variable is used to keep track of the critical section nesting.  This
+variable has to be stored as part of the task context and must be initialised to
+a non zero value to ensure interrupts don't inadvertently become unmasked before
+the scheduler starts.  As it is stored as part of the task context it will
+automatically be set to 0 when the first task is started. */
+volatile uint32_t ulCriticalNesting = 9999UL;
+
+/* Used to pass constants into the ASM code.  The address at which variables are
+placed is the constant value so indirect loads in the asm code are not
+required. */
+uint32_t ulICCIAR __attribute__( ( at( portICCIAR_INTERRUPT_ACKNOWLEDGE_REGISTER_ADDRESS ) ) );
+uint32_t ulICCEOIR __attribute__( ( at( portICCEOIR_END_OF_INTERRUPT_REGISTER_ADDRESS ) ) );
+uint32_t ulICCPMR __attribute__( ( at( portICCPMR_PRIORITY_MASK_REGISTER_ADDRESS ) ) );
+uint32_t ulAsmAPIPriorityMask __attribute__( ( at( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) ) );
+
+/* Saved as part of the task context.  If ulPortTaskHasFPUContext is non-zero then
+a floating point context must be saved and restored for the task. */
+uint32_t ulPortTaskHasFPUContext = pdFALSE;
+
+/* Set to 1 to pend a context switch from an ISR. */
+uint32_t ulPortYieldRequired = pdFALSE;
+
+/* Counts the interrupt nesting depth.  A context switch is only performed if
+if the nesting depth is 0. */
+uint32_t ulPortInterruptNesting = 0UL;
+
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
+{
+	/* Setup the initial stack of the task.  The stack is set exactly as
+	expected by the portRESTORE_CONTEXT() macro.
+
+	The fist real value on the stack is the status register, which is set for
+	system mode, with interrupts enabled.  A few NULLs are added first to ensure
+	GDB does not try decoding a non-existent return address. */
+	*pxTopOfStack = NULL;
+	pxTopOfStack--;
+	*pxTopOfStack = NULL;
+	pxTopOfStack--;
+	*pxTopOfStack = NULL;
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) portINITIAL_SPSR;
+
+	if( ( ( uint32_t ) pxCode & portTHUMB_MODE_ADDRESS ) != 0x00UL )
+	{
+		/* The task will start in THUMB mode. */
+		*pxTopOfStack |= portTHUMB_MODE_BIT;
+	}
+
+	pxTopOfStack--;
+
+	/* Next the return address, which in this case is the start of the task. */
+	*pxTopOfStack = ( StackType_t ) pxCode;
+	pxTopOfStack--;
+
+	/* Next all the registers other than the stack pointer. */
+	*pxTopOfStack = ( StackType_t ) prvTaskExitError;	/* R14 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x12121212;	/* R12 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x11111111;	/* R11 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x10101010;	/* R10 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x09090909;	/* R9 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x08080808;	/* R8 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x07070707;	/* R7 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x06060606;	/* R6 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x05050505;	/* R5 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x04040404;	/* R4 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x03030303;	/* R3 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x02020202;	/* R2 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) 0x01010101;	/* R1 */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */
+	pxTopOfStack--;
+
+	/* The task will start with a critical nesting count of 0 as interrupts are
+	enabled. */
+	*pxTopOfStack = portNO_CRITICAL_NESTING;
+	pxTopOfStack--;
+
+	/* The task will start without a floating point context.  A task that uses
+	the floating point hardware must call vPortTaskUsesFPU() before executing
+	any floating point instructions. */
+	*pxTopOfStack = portNO_FLOATING_POINT_CONTEXT;
+
+	return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+static void prvTaskExitError( void )
+{
+	/* A function that implements a task must not exit or attempt to return to
+	its caller as there is nothing to return to.  If a task wants to exit it
+	should instead call vTaskDelete( NULL ).
+
+	Artificially force an assert() to be triggered if configASSERT() is
+	defined, then stop here so application writers can catch the error. */
+	configASSERT( ulPortInterruptNesting == ~0UL );
+	portDISABLE_INTERRUPTS();
+	for( ;; );
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xPortStartScheduler( void )
+{
+uint32_t ulAPSR;
+
+	/* Only continue if the CPU is not in User mode.  The CPU must be in a
+	Privileged mode for the scheduler to start. */
+	__asm( "MRS ulAPSR, APSR" );
+	ulAPSR &= portAPSR_MODE_BITS_MASK;
+	configASSERT( ulAPSR != portAPSR_USER_MODE );
+
+	if( ulAPSR != portAPSR_USER_MODE )
+	{
+		/* Only continue if the binary point value is set to its lowest possible
+		setting.  See the comments in vPortValidateInterruptPriority() below for
+		more information. */
+		configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE );
+
+		if( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE )
+		{
+			/* Start the timer that generates the tick ISR. */
+			configSETUP_TICK_INTERRUPT();
+
+			__enable_irq();
+			vPortRestoreTaskContext();
+		}
+	}
+
+	/* Will only get here if vTaskStartScheduler() was called with the CPU in
+	a non-privileged mode or the binary point register was not set to its lowest
+	possible value. */
+	return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void )
+{
+	/* Not implemented in ports where there is nothing to return to.
+	Artificially force an assert. */
+	configASSERT( ulCriticalNesting == 1000UL );
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void )
+{
+	/* Disable interrupts as per portDISABLE_INTERRUPTS(); 	*/
+	ulPortSetInterruptMask();
+
+	/* Now interrupts are disabled ulCriticalNesting can be accessed
+	directly.  Increment ulCriticalNesting to keep a count of how many times
+	portENTER_CRITICAL() has been called. */
+	ulCriticalNesting++;
+
+	/* This is not the interrupt safe version of the enter critical function so
+	assert() if it is being called from an interrupt context.  Only API
+	functions that end in "FromISR" can be used in an interrupt.  Only assert if
+	the critical nesting count is 1 to protect against recursive calls if the
+	assert function also uses a critical section. */
+	if( ulCriticalNesting == 1 )
+	{
+		configASSERT( ulPortInterruptNesting == 0 );
+	}
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void )
+{
+	if( ulCriticalNesting > portNO_CRITICAL_NESTING )
+	{
+		/* Decrement the nesting count as the critical section is being
+		exited. */
+		ulCriticalNesting--;
+
+		/* If the nesting level has reached zero then all interrupt
+		priorities must be re-enabled. */
+		if( ulCriticalNesting == portNO_CRITICAL_NESTING )
+		{
+			/* Critical nesting has reached zero so all interrupt priorities
+			should be unmasked. */
+			portCLEAR_INTERRUPT_MASK();
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+void FreeRTOS_Tick_Handler( void )
+{
+	/* Set interrupt mask before altering scheduler structures.   The tick
+	handler runs at the lowest priority, so interrupts cannot already be masked,
+	so there is no need to save and restore the current mask value. */
+	__disable_irq();
+	portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
+	__asm(	"DSB		\n"
+			"ISB		\n" );
+	__enable_irq();
+
+	/* Increment the RTOS tick. */
+	if( xTaskIncrementTick() != pdFALSE )
+	{
+		ulPortYieldRequired = pdTRUE;
+	}
+
+	/* Ensure all interrupt priorities are active again. */
+	portCLEAR_INTERRUPT_MASK();
+	configCLEAR_TICK_INTERRUPT();
+}
+/*-----------------------------------------------------------*/
+
+void vPortTaskUsesFPU( void )
+{
+uint32_t ulInitialFPSCR = 0;
+
+	/* A task is registering the fact that it needs an FPU context.  Set the
+	FPU flag (which is saved as part of the task context). */
+	ulPortTaskHasFPUContext = pdTRUE;
+
+	/* Initialise the floating point status register. */
+	__asm( "FMXR 	FPSCR, ulInitialFPSCR" );
+}
+/*-----------------------------------------------------------*/
+
+void vPortClearInterruptMask( uint32_t ulNewMaskValue )
+{
+	if( ulNewMaskValue == pdFALSE )
+	{
+		portCLEAR_INTERRUPT_MASK();
+	}
+}
+/*-----------------------------------------------------------*/
+
+uint32_t ulPortSetInterruptMask( void )
+{
+uint32_t ulReturn;
+
+	__disable_irq();
+	if( portICCPMR_PRIORITY_MASK_REGISTER == ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) )
+	{
+		/* Interrupts were already masked. */
+		ulReturn = pdTRUE;
+	}
+	else
+	{
+		ulReturn = pdFALSE;
+		portICCPMR_PRIORITY_MASK_REGISTER = ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT );
+		__asm(	"DSB		\n"
+				"ISB		\n" );
+	}
+	__enable_irq();
+
+	return ulReturn;
+}
+/*-----------------------------------------------------------*/
+
+#if( configASSERT_DEFINED == 1 )
+
+	void vPortValidateInterruptPriority( void )
+	{
+		/* The following assertion will fail if a service routine (ISR) for
+		an interrupt that has been assigned a priority above
+		configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API
+		function.  ISR safe FreeRTOS API functions must *only* be called
+		from interrupts that have been assigned a priority at or below
+		configMAX_SYSCALL_INTERRUPT_PRIORITY.
+
+		Numerically low interrupt priority numbers represent logically high
+		interrupt priorities, therefore the priority of the interrupt must
+		be set to a value equal to or numerically *higher* than
+		configMAX_SYSCALL_INTERRUPT_PRIORITY.
+
+		FreeRTOS maintains separate thread and ISR API functions to ensure
+		interrupt entry is as fast and simple as possible.
+
+		The following links provide detailed information:
+		http://www.freertos.org/RTOS-Cortex-M3-M4.html
+		http://www.freertos.org/FAQHelp.html */
+		configASSERT( portICCRPR_RUNNING_PRIORITY_REGISTER >= ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) );
+
+		/* Priority grouping:  The interrupt controller (GIC) allows the bits
+		that define each interrupt's priority to be split between bits that
+		define the interrupt's pre-emption priority bits and bits that define
+		the interrupt's sub-priority.  For simplicity all bits must be defined
+		to be pre-emption priority bits.  The following assertion will fail if
+		this is not the case (if some bits represent a sub-priority).
+
+		The priority grouping is configured by the GIC's binary point register
+		(ICCBPR).  Writting 0 to ICCBPR will ensure it is set to its lowest
+		possible value (which may be above 0). */
+		configASSERT( portICCBPR_BINARY_POINT_REGISTER <= portMAX_BINARY_POINT_VALUE );
+	}
+
+#endif /* configASSERT_DEFINED */
+
+
+
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/portASM.s b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/portASM.s
new file mode 100644
index 0000000000000000000000000000000000000000..55091c815c23d96297c0ccfbaf79a7643aaef9c9
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/portASM.s
@@ -0,0 +1,200 @@
+;/*
+;    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+;    All rights reserved
+;
+;
+;    ***************************************************************************
+;     *                                                                       *
+;     *    FreeRTOS tutorial books are available in pdf and paperback.        *
+;     *    Complete, revised, and edited pdf reference manuals are also       *
+;     *    available.                                                         *
+;     *                                                                       *
+;     *    Purchasing FreeRTOS documentation will not only help you, by       *
+;     *    ensuring you get running as quickly as possible and with an        *
+;     *    in-depth knowledge of how to use FreeRTOS, it will also help       *
+;     *    the FreeRTOS project to continue with its mission of providing     *
+;     *    professional grade, cross platform, de facto standard solutions    *
+;     *    for microcontrollers - completely free of charge!                  *
+;     *                                                                       *
+;     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *
+;     *                                                                       *
+;     *    Thank you for using FreeRTOS, and thank you for your support!      *
+;     *                                                                       *
+;    ***************************************************************************
+;
+;
+;    This file is part of the FreeRTOS distribution.
+;
+;    FreeRTOS is free software; you can redistribute it and/or modify it under
+;    the terms of the GNU General Public License (version 2) as published by the
+;    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+;    >>>NOTE<<< The modification to the GPL is included to allow you to
+;    distribute a combined work that includes FreeRTOS without being obliged to
+;    provide the source code for proprietary components outside of the FreeRTOS
+;    kernel.  FreeRTOS is distributed in the hope that it will be useful, but
+;    WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+;    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+;    more details. You should have received a copy of the GNU General Public
+;    License and the FreeRTOS license exception along with FreeRTOS; if not it
+;    can be viewed here: http://www.freertos.org/a00114.html and also obtained
+;    by writing to Richard Barry, contact details for whom are available on the
+;    FreeRTOS WEB site.
+;
+;    1 tab == 4 spaces!
+;
+;    http://www.FreeRTOS.org - Documentation, latest information, license and
+;    contact details.
+;
+;    http://www.SafeRTOS.com - A version that is certified for use in safety
+;    critical systems.
+;
+;    http://www.OpenRTOS.com - Commercial support, development, porting,
+;    licensing and training services.
+;*/
+
+	INCLUDE portmacro.inc
+
+	IMPORT	vApplicationIRQHandler
+	IMPORT	vTaskSwitchContext
+	IMPORT	ulPortYieldRequired
+	IMPORT	ulPortInterruptNesting
+	IMPORT	vTaskSwitchContext
+	IMPORT	ulICCIAR
+	IMPORT	ulICCEOIR
+
+	EXPORT	FreeRTOS_SWI_Handler
+	EXPORT  FreeRTOS_IRQ_Handler
+	EXPORT 	vPortRestoreTaskContext
+
+	ARM
+	AREA	PORT_ASM, CODE, READONLY
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; SVC handler is used to yield a task.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+FreeRTOS_SWI_Handler
+
+	PRESERVE8
+
+	; Save the context of the current task and select a new task to run.
+	portSAVE_CONTEXT
+	LDR R0, =vTaskSwitchContext
+	BLX	R0
+	portRESTORE_CONTEXT
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; vPortRestoreTaskContext is used to start the scheduler.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+vPortRestoreTaskContext
+	; Switch to system mode
+	CPS		#SYS_MODE
+	portRESTORE_CONTEXT
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; PL390 GIC interrupt handler
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+FreeRTOS_IRQ_Handler
+
+	; Return to the interrupted instruction.
+	SUB		lr, lr, #4
+
+	; Push the return address and SPSR
+	PUSH	{lr}
+	MRS		lr, SPSR
+	PUSH	{lr}
+
+	; Change to supervisor mode to allow reentry.
+	CPS		#SVC_MODE
+
+	; Push used registers.
+	PUSH	{r0-r4, r12}
+
+	; Increment nesting count.  r3 holds the address of ulPortInterruptNesting
+	; for future use.  r1 holds the original ulPortInterruptNesting value for
+	; future use.
+	LDR		r3, =ulPortInterruptNesting
+	LDR		r1, [r3]
+	ADD		r4, r1, #1
+	STR		r4, [r3]
+
+	; Read value from the interrupt acknowledge register, which is stored in r0
+	; for future parameter and interrupt clearing use.
+	LDR 	r2, =ulICCIAR
+	LDR		r0, [r2]
+
+	; Ensure bit 2 of the stack pointer is clear.  r2 holds the bit 2 value for
+	; future use.
+	MOV		r2, sp
+	AND		r2, r2, #4
+	SUB		sp, sp, r2
+
+	; Call the interrupt handler
+	PUSH	{r0-r3, lr}
+	LDR		r1, =vApplicationIRQHandler
+	BLX		r1
+	POP		{r0-r3, lr}
+	ADD		sp, sp, r2
+
+	CPSID 	i
+
+	; Write the value read from ICCIAR to ICCEOIR
+	LDR 	r4, =ulICCEOIR
+	STR		r0, [r4]
+
+	; Restore the old nesting count
+	STR		r1, [r3]
+
+	; A context switch is never performed if the nesting count is not 0
+	CMP		r1, #0
+	BNE		exit_without_switch
+
+	; Did the interrupt request a context switch?  r1 holds the address of
+	; ulPortYieldRequired and r0 the value of ulPortYieldRequired for future
+	; use.
+	LDR		r1, =ulPortYieldRequired
+	LDR		r0, [r1]
+	CMP		r0, #0
+	BNE		switch_before_exit
+
+exit_without_switch
+	; No context switch.  Restore used registers, LR_irq and SPSR before
+	; returning.
+	POP		{r0-r4, r12}
+	CPS		#IRQ_MODE
+	POP		{LR}
+	MSR		SPSR_cxsf, LR
+	POP		{LR}
+	MOVS	PC, LR
+
+switch_before_exit
+	; A context swtich is to be performed.  Clear the context switch pending
+	; flag.
+	MOV		r0, #0
+	STR		r0, [r1]
+
+	; Restore used registers, LR-irq and SPSR before saving the context
+	; to the task stack.
+	POP		{r0-r4, r12}
+	CPS		#IRQ_MODE
+	POP		{LR}
+	MSR		SPSR_cxsf, LR
+	POP		{LR}
+	portSAVE_CONTEXT
+
+	; Call the function that selects the new task to execute.
+	; vTaskSwitchContext() if vTaskSwitchContext() uses LDRD or STRD
+	; instructions, or 8 byte aligned stack allocated data.  LR does not need
+	; saving as a new LR will be loaded by portRESTORE_CONTEXT anyway.
+	LDR		r0, =vTaskSwitchContext
+	BLX		r0
+
+	; Restore the context of, and branch to, the task selected to execute next.
+	portRESTORE_CONTEXT
+
+
+	END
+
+
+
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/portmacro.h b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/portmacro.h
new file mode 100644
index 0000000000000000000000000000000000000000..469120ddbaa70171a3164cbccdcf522900fde6f5
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/portmacro.h
@@ -0,0 +1,205 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the given hardware
+ * and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+#define portCHAR		char
+#define portFLOAT		float
+#define portDOUBLE		double
+#define portLONG		long
+#define portSHORT		short
+#define portSTACK_TYPE	uint32_t
+#define portBASE_TYPE	long
+
+typedef portSTACK_TYPE StackType_t;
+typedef long BaseType_t;
+typedef unsigned long UBaseType_t;
+
+
+#if( configUSE_16_BIT_TICKS == 1 )
+	typedef uint16_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffff
+#else
+	typedef uint32_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+
+	/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
+	not need to be guarded with a critical section. */
+	#define portTICK_TYPE_IS_ATOMIC 1
+#endif
+/*-----------------------------------------------------------*/
+
+/* Hardware specifics. */
+#define portSTACK_GROWTH			( -1 )
+#define portTICK_PERIOD_MS			( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+#define portBYTE_ALIGNMENT			8
+
+/*-----------------------------------------------------------*/
+
+/* Task utilities. */
+
+/* Called at the end of an ISR that can cause a context switch. */
+#define portEND_SWITCHING_ISR( xSwitchRequired )\
+{												\
+extern uint32_t ulPortYieldRequired;			\
+												\
+	if( xSwitchRequired != pdFALSE )			\
+	{											\
+		ulPortYieldRequired = pdTRUE;			\
+	}											\
+}
+
+#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
+#define portYIELD() __asm( "SWI 0" );
+
+
+/*-----------------------------------------------------------
+ * Critical section control
+ *----------------------------------------------------------*/
+
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+extern uint32_t ulPortSetInterruptMask( void );
+extern void vPortClearInterruptMask( uint32_t ulNewMaskValue );
+
+/* These macros do not globally disable/enable interrupts.  They do mask off
+interrupts that have a priority below configMAX_API_CALL_INTERRUPT_PRIORITY. */
+#define portENTER_CRITICAL()		vPortEnterCritical();
+#define portEXIT_CRITICAL()			vPortExitCritical();
+#define portDISABLE_INTERRUPTS()	ulPortSetInterruptMask()
+#define portENABLE_INTERRUPTS()		vPortClearInterruptMask( 0 )
+#define portSET_INTERRUPT_MASK_FROM_ISR()		ulPortSetInterruptMask()
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x)	vPortClearInterruptMask(x)
+
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site.  These are
+not required for this port but included in case common demo code that uses these
+macros is used. */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters )	void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters )	void vFunction( void *pvParameters )
+
+/* Prototype of the FreeRTOS tick handler.  This must be installed as the
+handler for whichever peripheral is used to generate the RTOS tick. */
+void FreeRTOS_Tick_Handler( void );
+
+/* Any task that uses the floating point unit MUST call vPortTaskUsesFPU()
+before any floating point instructions are executed. */
+void vPortTaskUsesFPU( void );
+#define portTASK_USES_FLOATING_POINT() vPortTaskUsesFPU()
+
+#define portLOWEST_INTERRUPT_PRIORITY ( ( ( uint32_t ) configUNIQUE_INTERRUPT_PRIORITIES ) - 1UL )
+#define portLOWEST_USABLE_INTERRUPT_PRIORITY ( portLOWEST_INTERRUPT_PRIORITY - 1UL )
+
+/* Architecture specific optimisations. */
+#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
+	#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
+#endif
+
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
+
+	/* Store/clear the ready priorities in a bit map. */
+	#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
+	#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
+
+	/*-----------------------------------------------------------*/
+
+	#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __clz( uxReadyPriorities ) )
+
+#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
+
+#ifdef configASSERT
+	void vPortValidateInterruptPriority( void );
+	#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() 	vPortValidateInterruptPriority()
+#endif
+
+#define portNOP() __nop()
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/portmacro.inc b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/portmacro.inc
new file mode 100644
index 0000000000000000000000000000000000000000..4a46924bd3d093a582657a7f45d631fdc5687593
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CA9/portmacro.inc
@@ -0,0 +1,147 @@
+;/*
+;    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+;    All rights reserved
+;
+;
+;    ***************************************************************************
+;     *                                                                       *
+;     *    FreeRTOS tutorial books are available in pdf and paperback.        *
+;     *    Complete, revised, and edited pdf reference manuals are also       *
+;     *    available.                                                         *
+;     *                                                                       *
+;     *    Purchasing FreeRTOS documentation will not only help you, by       *
+;     *    ensuring you get running as quickly as possible and with an        *
+;     *    in-depth knowledge of how to use FreeRTOS, it will also help       *
+;     *    the FreeRTOS project to continue with its mission of providing     *
+;     *    professional grade, cross platform, de facto standard solutions    *
+;     *    for microcontrollers - completely free of charge!                  *
+;     *                                                                       *
+;     *    >>> See http://www.FreeRTOS.org/Documentation for details. <<<     *
+;     *                                                                       *
+;     *    Thank you for using FreeRTOS, and thank you for your support!      *
+;     *                                                                       *
+;    ***************************************************************************
+;
+;
+;    This file is part of the FreeRTOS distribution.
+;
+;    FreeRTOS is free software; you can redistribute it and/or modify it under
+;    the terms of the GNU General Public License (version 2) as published by the
+;    Free Software Foundation AND MODIFIED BY the FreeRTOS exception.
+;    >>>NOTE<<< The modification to the GPL is included to allow you to
+;    distribute a combined work that includes FreeRTOS without being obliged to
+;    provide the source code for proprietary components outside of the FreeRTOS
+;    kernel.  FreeRTOS is distributed in the hope that it will be useful, but
+;    WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+;    or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+;    more details. You should have received a copy of the GNU General Public
+;    License and the FreeRTOS license exception along with FreeRTOS; if not it
+;    can be viewed here: http://www.freertos.org/a00114.html and also obtained
+;    by writing to Richard Barry, contact details for whom are available on the
+;    FreeRTOS WEB site.
+;
+;    1 tab == 4 spaces!
+;
+;    http://www.FreeRTOS.org - Documentation, latest information, license and
+;    contact details.
+;
+;    http://www.SafeRTOS.com - A version that is certified for use in safety
+;    critical systems.
+;
+;    http://www.OpenRTOS.com - Commercial support, development, porting,
+;    licensing and training services.
+;*/
+
+SYS_MODE			EQU		0x1f
+SVC_MODE			EQU		0x13
+IRQ_MODE			EQU		0x12
+
+	IMPORT  ulCriticalNesting
+	IMPORT	pxCurrentTCB
+	IMPORT	ulPortTaskHasFPUContext
+	IMPORT  ulAsmAPIPriorityMask
+	IMPORT	ulICCPMR
+
+
+	MACRO
+	portSAVE_CONTEXT
+
+	; Save the LR and SPSR onto the system mode stack before switching to
+	; system mode to save the remaining system mode registers
+	SRSDB	sp!, #SYS_MODE
+	CPS		#SYS_MODE
+	PUSH	{R0-R12, R14}
+
+	; Push the critical nesting count
+	LDR		R2, =ulCriticalNesting
+	LDR		R1, [R2]
+	PUSH	{R1}
+
+	; Does the task have a floating point context that needs saving?  If
+	; ulPortTaskHasFPUContext is 0 then no.
+	LDR		R2, =ulPortTaskHasFPUContext
+	LDR		R3, [R2]
+	CMP		R3, #0
+
+	; Save the floating point context, if any
+	FMRXNE  R1,  FPSCR
+	VPUSHNE {D0-D15}
+	VPUSHNE	{D16-D31}
+	PUSHNE	{R1}
+
+	; Save ulPortTaskHasFPUContext itself
+	PUSH	{R3}
+
+	; Save the stack pointer in the TCB
+	LDR		R0, =pxCurrentTCB
+	LDR		R1, [R0]
+	STR		SP, [R1]
+
+	MEND
+
+; /**********************************************************************/
+
+	MACRO
+	portRESTORE_CONTEXT
+
+	; Set the SP to point to the stack of the task being restored.
+	LDR		R0, =pxCurrentTCB
+	LDR		R1, [R0]
+	LDR		SP, [R1]
+
+	; Is there a floating point context to restore?  If the restored
+	; ulPortTaskHasFPUContext is zero then no.
+	LDR		R0, =ulPortTaskHasFPUContext
+	POP		{R1}
+	STR		R1, [R0]
+	CMP		R1, #0
+
+	; Restore the floating point context, if any
+	POPNE	{R0}
+	VPOPNE	{D16-D31}
+	VPOPNE	{D0-D15}
+	VMSRNE  FPSCR, R0
+
+	; Restore the critical section nesting depth
+	LDR		R0, =ulCriticalNesting
+	POP		{R1}
+	STR		R1, [R0]
+
+	; Ensure the priority mask is correct for the critical nesting depth
+	LDR		R2, =ulICCPMR
+	CMP		R1, #0
+	MOVEQ	R4, #255
+	LDRNE	R4, =ulAsmAPIPriorityMask
+	STR		R4, [r2]
+
+	; Restore all system mode registers other than the SP (which is already
+	; being used)
+	POP		{R0-R12, R14}
+
+	; Return to the task code, loading CPSR on the way.
+	RFEIA	sp!
+
+	MEND
+
+	END
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM0/port.c b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM0/port.c
new file mode 100644
index 0000000000000000000000000000000000000000..6fc1e94b67020a73146b7d14f7f59fd6cb966273
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM0/port.c
@@ -0,0 +1,349 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+/*-----------------------------------------------------------
+ * Implementation of functions defined in portable.h for the ARM CM0 port.
+ *----------------------------------------------------------*/
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+/* Constants required to manipulate the NVIC. */
+#define portNVIC_SYSTICK_CTRL		( ( volatile uint32_t *) 0xe000e010 )
+#define portNVIC_SYSTICK_LOAD		( ( volatile uint32_t *) 0xe000e014 )
+#define portNVIC_INT_CTRL			( ( volatile uint32_t *) 0xe000ed04 )
+#define portNVIC_SYSPRI2			( ( volatile uint32_t *) 0xe000ed20 )
+#define portNVIC_SYSTICK_CLK		0x00000004
+#define portNVIC_SYSTICK_INT		0x00000002
+#define portNVIC_SYSTICK_ENABLE		0x00000001
+#define portNVIC_PENDSVSET			0x10000000
+#define portMIN_INTERRUPT_PRIORITY	( 255UL )
+#define portNVIC_PENDSV_PRI			( portMIN_INTERRUPT_PRIORITY << 16UL )
+#define portNVIC_SYSTICK_PRI		( portMIN_INTERRUPT_PRIORITY << 24UL )
+
+/* Constants required to set up the initial stack. */
+#define portINITIAL_XPSR			( 0x01000000 )
+
+/* Constants used with memory barrier intrinsics. */
+#define portSY_FULL_READ_WRITE		( 15 )
+
+/* Each task maintains its own interrupt status in the critical nesting
+variable. */
+static UBaseType_t uxCriticalNesting = 0xaaaaaaaa;
+
+/*
+ * Setup the timer to generate the tick interrupts.
+ */
+static void prvSetupTimerInterrupt( void );
+
+/*
+ * Exception handlers.
+ */
+void xPortPendSVHandler( void );
+void xPortSysTickHandler( void );
+void vPortSVCHandler( void );
+
+/*
+ * Start first task is a separate function so it can be tested in isolation.
+ */
+static void prvPortStartFirstTask( void );
+
+/*
+ * Used to catch tasks that attempt to return from their implementing function.
+ */
+static void prvTaskExitError( void );
+
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
+{
+	/* Simulate the stack frame as it would be created by a context switch
+	interrupt. */
+	pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+	*pxTopOfStack = portINITIAL_XPSR;	/* xPSR */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) pxCode;	/* PC */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) prvTaskExitError;	/* LR */
+	pxTopOfStack -= 5;	/* R12, R3, R2 and R1. */
+	*pxTopOfStack = ( StackType_t ) pvParameters;	/* R0 */
+	pxTopOfStack -= 8; /* R11..R4. */
+
+	return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+static void prvTaskExitError( void )
+{
+	/* A function that implements a task must not exit or attempt to return to
+	its caller as there is nothing to return to.  If a task wants to exit it
+	should instead call vTaskDelete( NULL ).
+
+	Artificially force an assert() to be triggered if configASSERT() is
+	defined, then stop here so application writers can catch the error. */
+	configASSERT( uxCriticalNesting == ~0UL );
+	portDISABLE_INTERRUPTS();
+	for( ;; );
+}
+/*-----------------------------------------------------------*/
+
+void vPortSVCHandler( void )
+{
+	/* This function is no longer used, but retained for backward
+	compatibility. */
+}
+/*-----------------------------------------------------------*/
+
+__asm void prvPortStartFirstTask( void )
+{
+	extern pxCurrentTCB;
+
+	PRESERVE8
+
+	/* The MSP stack is not reset as, unlike on M3/4 parts, there is no vector
+	table offset register that can be used to locate the initial stack value.
+	Not all M0 parts have the application vector table at address 0. */
+
+	ldr	r3, =pxCurrentTCB	/* Obtain location of pxCurrentTCB. */
+	ldr r1, [r3]
+	ldr r0, [r1]			/* The first item in pxCurrentTCB is the task top of stack. */
+	adds r0, #32			/* Discard everything up to r0. */
+	msr psp, r0				/* This is now the new top of stack to use in the task. */
+	movs r0, #2				/* Switch to the psp stack. */
+	msr CONTROL, r0
+	isb
+	pop {r0-r5}				/* Pop the registers that are saved automatically. */
+	mov lr, r5				/* lr is now in r5. */
+	pop {r3}				/* The return address is now in r3. */
+	pop {r2}				/* Pop and discard the XPSR. */
+	cpsie i					/* The first task has its context and interrupts can be enabled. */
+	bx r3					/* Finally, jump to the user defined task code. */
+
+	ALIGN
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+BaseType_t xPortStartScheduler( void )
+{
+	/* Make PendSV, CallSV and SysTick the same priroity as the kernel. */
+	*(portNVIC_SYSPRI2) |= portNVIC_PENDSV_PRI;
+	*(portNVIC_SYSPRI2) |= portNVIC_SYSTICK_PRI;
+
+	/* Start the timer that generates the tick ISR.  Interrupts are disabled
+	here already. */
+	prvSetupTimerInterrupt();
+
+	/* Initialise the critical nesting count ready for the first task. */
+	uxCriticalNesting = 0;
+
+	/* Start the first task. */
+	prvPortStartFirstTask();
+
+	/* Should not get here! */
+	return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void )
+{
+	/* Not implemented in ports where there is nothing to return to.
+	Artificially force an assert. */
+	configASSERT( uxCriticalNesting == 1000UL );
+}
+/*-----------------------------------------------------------*/
+
+void vPortYield( void )
+{
+	/* Set a PendSV to request a context switch. */
+	*( portNVIC_INT_CTRL ) = portNVIC_PENDSVSET;
+
+	/* Barriers are normally not required but do ensure the code is completely
+	within the specified behaviour for the architecture. */
+	__dsb( portSY_FULL_READ_WRITE );
+	__isb( portSY_FULL_READ_WRITE );
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void )
+{
+    portDISABLE_INTERRUPTS();
+    uxCriticalNesting++;
+	__dsb( portSY_FULL_READ_WRITE );
+	__isb( portSY_FULL_READ_WRITE );
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void )
+{
+	configASSERT( uxCriticalNesting );
+    uxCriticalNesting--;
+    if( uxCriticalNesting == 0 )
+    {
+        portENABLE_INTERRUPTS();
+    }
+}
+/*-----------------------------------------------------------*/
+
+__asm uint32_t ulSetInterruptMaskFromISR( void )
+{
+	mrs r0, PRIMASK
+	cpsid i
+	bx lr
+}
+/*-----------------------------------------------------------*/
+
+__asm void vClearInterruptMaskFromISR( uint32_t ulMask )
+{
+	msr PRIMASK, r0
+	bx lr
+}
+/*-----------------------------------------------------------*/
+
+__asm void xPortPendSVHandler( void )
+{
+	extern vTaskSwitchContext
+	extern pxCurrentTCB
+
+	PRESERVE8
+
+	mrs r0, psp
+
+	ldr	r3, =pxCurrentTCB 	/* Get the location of the current TCB. */
+	ldr	r2, [r3]
+
+	subs r0, #32			/* Make space for the remaining low registers. */
+	str r0, [r2]			/* Save the new top of stack. */
+	stmia r0!, {r4-r7}		/* Store the low registers that are not saved automatically. */
+	mov r4, r8				/* Store the high registers. */
+	mov r5, r9
+	mov r6, r10
+	mov r7, r11
+	stmia r0!, {r4-r7}
+
+	push {r3, r14}
+	cpsid i
+	bl vTaskSwitchContext
+	cpsie i
+	pop {r2, r3}			/* lr goes in r3. r2 now holds tcb pointer. */
+
+	ldr r1, [r2]
+	ldr r0, [r1]			/* The first item in pxCurrentTCB is the task top of stack. */
+	adds r0, #16			/* Move to the high registers. */
+	ldmia r0!, {r4-r7}		/* Pop the high registers. */
+	mov r8, r4
+	mov r9, r5
+	mov r10, r6
+	mov r11, r7
+
+	msr psp, r0				/* Remember the new top of stack for the task. */
+
+	subs r0, #32			/* Go back for the low registers that are not automatically restored. */
+	ldmia r0!, {r4-r7}      /* Pop low registers.  */
+
+	bx r3
+	ALIGN
+}
+/*-----------------------------------------------------------*/
+
+void xPortSysTickHandler( void )
+{
+uint32_t ulPreviousMask;
+
+	ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		/* Increment the RTOS tick. */
+		if( xTaskIncrementTick() != pdFALSE )
+		{
+			/* Pend a context switch. */
+			*(portNVIC_INT_CTRL) = portNVIC_PENDSVSET;
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask );
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * Setup the systick timer to generate the tick interrupts at the required
+ * frequency.
+ */
+void prvSetupTimerInterrupt( void )
+{
+	/* Configure SysTick to interrupt at the requested rate. */
+	*(portNVIC_SYSTICK_LOAD) = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
+	*(portNVIC_SYSTICK_CTRL) = portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE;
+}
+/*-----------------------------------------------------------*/
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM0/portmacro.h b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM0/portmacro.h
new file mode 100644
index 0000000000000000000000000000000000000000..70a12e501bfcd43479276d67082672c9b3060bd4
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM0/portmacro.h
@@ -0,0 +1,156 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+#define portCHAR		char
+#define portFLOAT		float
+#define portDOUBLE		double
+#define portLONG		long
+#define portSHORT		short
+#define portSTACK_TYPE	uint32_t
+#define portBASE_TYPE	long
+
+typedef portSTACK_TYPE StackType_t;
+typedef long BaseType_t;
+typedef unsigned long UBaseType_t;
+
+#if( configUSE_16_BIT_TICKS == 1 )
+	typedef uint16_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffff
+#else
+	typedef uint32_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+
+	/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
+	not need to be guarded with a critical section. */
+	#define portTICK_TYPE_IS_ATOMIC 1
+#endif
+/*-----------------------------------------------------------*/
+
+/* Architecture specifics. */
+#define portSTACK_GROWTH			( -1 )
+#define portTICK_PERIOD_MS			( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+#define portBYTE_ALIGNMENT			8
+/*-----------------------------------------------------------*/
+
+
+/* Scheduler utilities. */
+extern void vPortYield( void );
+#define portNVIC_INT_CTRL_REG		( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
+#define portNVIC_PENDSVSET_BIT		( 1UL << 28UL )
+#define portYIELD()					vPortYield()
+#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT
+#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
+/*-----------------------------------------------------------*/
+
+/* Critical section management. */
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+extern uint32_t ulSetInterruptMaskFromISR( void );
+extern void vClearInterruptMaskFromISR( uint32_t ulMask );
+
+#define portSET_INTERRUPT_MASK_FROM_ISR()		ulSetInterruptMaskFromISR()
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x)	vClearInterruptMaskFromISR( x )
+#define portDISABLE_INTERRUPTS()				__disable_irq()
+#define portENABLE_INTERRUPTS()					__enable_irq()
+#define portENTER_CRITICAL()					vPortEnterCritical()
+#define portEXIT_CRITICAL()						vPortExitCritical()
+
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site. */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
+
+#define portNOP()
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM3/port.c b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM3/port.c
new file mode 100644
index 0000000000000000000000000000000000000000..61d85967d7c1420f9e0fcaed12115e9e8af987d9
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM3/port.c
@@ -0,0 +1,701 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+/*-----------------------------------------------------------
+ * Implementation of functions defined in portable.h for the ARM CM3 port.
+ *----------------------------------------------------------*/
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+#ifndef configKERNEL_INTERRUPT_PRIORITY
+	#define configKERNEL_INTERRUPT_PRIORITY 255
+#endif
+
+#if configMAX_SYSCALL_INTERRUPT_PRIORITY == 0
+	#error configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0.  See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html
+#endif
+
+#ifndef configSYSTICK_CLOCK_HZ
+	#define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ
+	/* Ensure the SysTick is clocked at the same frequency as the core. */
+	#define portNVIC_SYSTICK_CLK_BIT	( 1UL << 2UL )
+#else
+	/* The way the SysTick is clocked is not modified in case it is not the same
+	as the core. */
+	#define portNVIC_SYSTICK_CLK_BIT	( 0 )
+#endif
+
+/* The __weak attribute does not work as you might expect with the Keil tools
+so the configOVERRIDE_DEFAULT_TICK_CONFIGURATION constant must be set to 1 if
+the application writer wants to provide their own implementation of
+vPortSetupTimerInterrupt().  Ensure configOVERRIDE_DEFAULT_TICK_CONFIGURATION
+is defined. */
+#ifndef configOVERRIDE_DEFAULT_TICK_CONFIGURATION
+	#define configOVERRIDE_DEFAULT_TICK_CONFIGURATION 0
+#endif
+
+/* Constants required to manipulate the core.  Registers first... */
+#define portNVIC_SYSTICK_CTRL_REG			( * ( ( volatile uint32_t * ) 0xe000e010 ) )
+#define portNVIC_SYSTICK_LOAD_REG			( * ( ( volatile uint32_t * ) 0xe000e014 ) )
+#define portNVIC_SYSTICK_CURRENT_VALUE_REG	( * ( ( volatile uint32_t * ) 0xe000e018 ) )
+#define portNVIC_SYSPRI2_REG				( * ( ( volatile uint32_t * ) 0xe000ed20 ) )
+/* ...then bits in the registers. */
+#define portNVIC_SYSTICK_INT_BIT			( 1UL << 1UL )
+#define portNVIC_SYSTICK_ENABLE_BIT			( 1UL << 0UL )
+#define portNVIC_SYSTICK_COUNT_FLAG_BIT		( 1UL << 16UL )
+#define portNVIC_PENDSVCLEAR_BIT 			( 1UL << 27UL )
+#define portNVIC_PEND_SYSTICK_CLEAR_BIT		( 1UL << 25UL )
+
+/* Masks off all bits but the VECTACTIVE bits in the ICSR register. */
+#define portVECTACTIVE_MASK					( 0xFFUL )
+
+#define portNVIC_PENDSV_PRI					( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL )
+#define portNVIC_SYSTICK_PRI				( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL )
+
+/* Constants required to check the validity of an interrupt priority. */
+#define portFIRST_USER_INTERRUPT_NUMBER		( 16 )
+#define portNVIC_IP_REGISTERS_OFFSET_16 	( 0xE000E3F0 )
+#define portAIRCR_REG						( * ( ( volatile uint32_t * ) 0xE000ED0C ) )
+#define portMAX_8_BIT_VALUE					( ( uint8_t ) 0xff )
+#define portTOP_BIT_OF_BYTE					( ( uint8_t ) 0x80 )
+#define portMAX_PRIGROUP_BITS				( ( uint8_t ) 7 )
+#define portPRIORITY_GROUP_MASK				( 0x07UL << 8UL )
+#define portPRIGROUP_SHIFT					( 8UL )
+
+/* Constants required to set up the initial stack. */
+#define portINITIAL_XPSR			( 0x01000000 )
+
+/* The systick is a 24-bit counter. */
+#define portMAX_24_BIT_NUMBER				( 0xffffffUL )
+
+/* A fiddle factor to estimate the number of SysTick counts that would have
+occurred while the SysTick counter is stopped during tickless idle
+calculations. */
+#define portMISSED_COUNTS_FACTOR			( 45UL )
+
+/* For strict compliance with the Cortex-M spec the task start address should
+have bit-0 clear, as it is loaded into the PC on exit from an ISR. */
+#define portSTART_ADDRESS_MASK				( ( StackType_t ) 0xfffffffeUL )
+
+/* Each task maintains its own interrupt status in the critical nesting
+variable. */
+static UBaseType_t uxCriticalNesting = 0xaaaaaaaa;
+
+/*
+ * Setup the timer to generate the tick interrupts.  The implementation in this
+ * file is weak to allow application writers to change the timer used to
+ * generate the tick interrupt.
+ */
+void vPortSetupTimerInterrupt( void );
+
+/*
+ * Exception handlers.
+ */
+void xPortPendSVHandler( void );
+void xPortSysTickHandler( void );
+void vPortSVCHandler( void );
+
+/*
+ * Start first task is a separate function so it can be tested in isolation.
+ */
+static void prvStartFirstTask( void );
+
+/*
+ * Used to catch tasks that attempt to return from their implementing function.
+ */
+static void prvTaskExitError( void );
+
+/*-----------------------------------------------------------*/
+
+/*
+ * The number of SysTick increments that make up one tick period.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+	static uint32_t ulTimerCountsForOneTick = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * The maximum number of tick periods that can be suppressed is limited by the
+ * 24 bit resolution of the SysTick timer.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+	static uint32_t xMaximumPossibleSuppressedTicks = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * Compensate for the CPU cycles that pass while the SysTick is stopped (low
+ * power functionality only.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+	static uint32_t ulStoppedTimerCompensation = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure
+ * FreeRTOS API functions are not called from interrupts that have been assigned
+ * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY.
+ */
+#if ( configASSERT_DEFINED == 1 )
+	 static uint8_t ucMaxSysCallPriority = 0;
+	 static uint32_t ulMaxPRIGROUPValue = 0;
+	 static const volatile uint8_t * const pcInterruptPriorityRegisters = ( uint8_t * ) portNVIC_IP_REGISTERS_OFFSET_16;
+#endif /* configASSERT_DEFINED */
+
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
+{
+	/* Simulate the stack frame as it would be created by a context switch
+	interrupt. */
+	pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+	*pxTopOfStack = portINITIAL_XPSR;	/* xPSR */
+	pxTopOfStack--;
+	*pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK;	/* PC */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) prvTaskExitError;	/* LR */
+
+	pxTopOfStack -= 5;	/* R12, R3, R2 and R1. */
+	*pxTopOfStack = ( StackType_t ) pvParameters;	/* R0 */
+	pxTopOfStack -= 8;	/* R11, R10, R9, R8, R7, R6, R5 and R4. */
+
+	return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+static void prvTaskExitError( void )
+{
+	/* A function that implements a task must not exit or attempt to return to
+	its caller as there is nothing to return to.  If a task wants to exit it
+	should instead call vTaskDelete( NULL ).
+
+	Artificially force an assert() to be triggered if configASSERT() is
+	defined, then stop here so application writers can catch the error. */
+	configASSERT( uxCriticalNesting == ~0UL );
+	portDISABLE_INTERRUPTS();
+	for( ;; );
+}
+/*-----------------------------------------------------------*/
+
+__asm void vPortSVCHandler( void )
+{
+	PRESERVE8
+
+	ldr	r3, =pxCurrentTCB	/* Restore the context. */
+	ldr r1, [r3]			/* Use pxCurrentTCBConst to get the pxCurrentTCB address. */
+	ldr r0, [r1]			/* The first item in pxCurrentTCB is the task top of stack. */
+	ldmia r0!, {r4-r11}		/* Pop the registers that are not automatically saved on exception entry and the critical nesting count. */
+	msr psp, r0				/* Restore the task stack pointer. */
+	isb
+	mov r0, #0
+	msr	basepri, r0
+	orr r14, #0xd
+	bx r14
+}
+/*-----------------------------------------------------------*/
+
+__asm void prvStartFirstTask( void )
+{
+	PRESERVE8
+
+	/* Use the NVIC offset register to locate the stack. */
+	ldr r0, =0xE000ED08
+	ldr r0, [r0]
+	ldr r0, [r0]
+
+	/* Set the msp back to the start of the stack. */
+	msr msp, r0
+	/* Globally enable interrupts. */
+	cpsie i
+	cpsie f
+	dsb
+	isb
+	/* Call SVC to start the first task. */
+	svc 0
+	nop
+	nop
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+BaseType_t xPortStartScheduler( void )
+{
+	#if( configASSERT_DEFINED == 1 )
+	{
+		volatile uint32_t ulOriginalPriority;
+		volatile uint8_t * const pucFirstUserPriorityRegister = ( uint8_t * ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER );
+		volatile uint8_t ucMaxPriorityValue;
+
+		/* Determine the maximum priority from which ISR safe FreeRTOS API
+		functions can be called.  ISR safe functions are those that end in
+		"FromISR".  FreeRTOS maintains separate thread and ISR API functions to
+		ensure interrupt entry is as fast and simple as possible.
+
+		Save the interrupt priority value that is about to be clobbered. */
+		ulOriginalPriority = *pucFirstUserPriorityRegister;
+
+		/* Determine the number of priority bits available.  First write to all
+		possible bits. */
+		*pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE;
+
+		/* Read the value back to see how many bits stuck. */
+		ucMaxPriorityValue = *pucFirstUserPriorityRegister;
+
+		/* Use the same mask on the maximum system call priority. */
+		ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue;
+
+		/* Calculate the maximum acceptable priority group value for the number
+		of bits read back. */
+		ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS;
+		while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE )
+		{
+			ulMaxPRIGROUPValue--;
+			ucMaxPriorityValue <<= ( uint8_t ) 0x01;
+		}
+
+		/* Shift the priority group value back to its position within the AIRCR
+		register. */
+		ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT;
+		ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK;
+
+		/* Restore the clobbered interrupt priority register to its original
+		value. */
+		*pucFirstUserPriorityRegister = ulOriginalPriority;
+	}
+	#endif /* conifgASSERT_DEFINED */
+
+	/* Make PendSV and SysTick the lowest priority interrupts. */
+	portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI;
+	portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI;
+
+	/* Start the timer that generates the tick ISR.  Interrupts are disabled
+	here already. */
+	vPortSetupTimerInterrupt();
+
+	/* Initialise the critical nesting count ready for the first task. */
+	uxCriticalNesting = 0;
+
+	/* Start the first task. */
+	prvStartFirstTask();
+
+	/* Should not get here! */
+	return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void )
+{
+	/* Not implemented in ports where there is nothing to return to.
+	Artificially force an assert. */
+	configASSERT( uxCriticalNesting == 1000UL );
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void )
+{
+	portDISABLE_INTERRUPTS();
+	uxCriticalNesting++;
+
+	/* This is not the interrupt safe version of the enter critical function so
+	assert() if it is being called from an interrupt context.  Only API
+	functions that end in "FromISR" can be used in an interrupt.  Only assert if
+	the critical nesting count is 1 to protect against recursive calls if the
+	assert function also uses a critical section. */
+	if( uxCriticalNesting == 1 )
+	{
+		configASSERT( ( portNVIC_INT_CTRL_REG & portVECTACTIVE_MASK ) == 0 );
+	}
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void )
+{
+	configASSERT( uxCriticalNesting );
+	uxCriticalNesting--;
+	if( uxCriticalNesting == 0 )
+	{
+		portENABLE_INTERRUPTS();
+	}
+}
+/*-----------------------------------------------------------*/
+
+__asm void xPortPendSVHandler( void )
+{
+	extern uxCriticalNesting;
+	extern pxCurrentTCB;
+	extern vTaskSwitchContext;
+
+	PRESERVE8
+
+	mrs r0, psp
+	isb
+
+	ldr	r3, =pxCurrentTCB		/* Get the location of the current TCB. */
+	ldr	r2, [r3]
+
+	stmdb r0!, {r4-r11}			/* Save the remaining registers. */
+	str r0, [r2]				/* Save the new top of stack into the first member of the TCB. */
+
+	stmdb sp!, {r3, r14}
+	mov r0, #configMAX_SYSCALL_INTERRUPT_PRIORITY
+	msr basepri, r0
+	dsb
+	isb
+	bl vTaskSwitchContext
+	mov r0, #0
+	msr basepri, r0
+	ldmia sp!, {r3, r14}
+
+	ldr r1, [r3]
+	ldr r0, [r1]				/* The first item in pxCurrentTCB is the task top of stack. */
+	ldmia r0!, {r4-r11}			/* Pop the registers and the critical nesting count. */
+	msr psp, r0
+	isb
+	bx r14
+	nop
+}
+/*-----------------------------------------------------------*/
+
+void xPortSysTickHandler( void )
+{
+	/* The SysTick runs at the lowest interrupt priority, so when this interrupt
+	executes all interrupts must be unmasked.  There is therefore no need to
+	save and then restore the interrupt mask value as its value is already
+	known - therefore the slightly faster vPortRaiseBASEPRI() function is used
+	in place of portSET_INTERRUPT_MASK_FROM_ISR(). */
+	vPortRaiseBASEPRI();
+	{
+		/* Increment the RTOS tick. */
+		if( xTaskIncrementTick() != pdFALSE )
+		{
+			/* A context switch is required.  Context switching is performed in
+			the PendSV interrupt.  Pend the PendSV interrupt. */
+			portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+		}
+	}
+	vPortClearBASEPRIFromISR();
+}
+/*-----------------------------------------------------------*/
+
+#if configUSE_TICKLESS_IDLE == 1
+
+	__weak void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
+	{
+	uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements, ulSysTickCTRL;
+	TickType_t xModifiableIdleTime;
+
+		/* Make sure the SysTick reload value does not overflow the counter. */
+		if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
+		{
+			xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
+		}
+
+		/* Stop the SysTick momentarily.  The time the SysTick is stopped for
+		is accounted for as best it can be, but using the tickless mode will
+		inevitably result in some tiny drift of the time maintained by the
+		kernel with respect to calendar time. */
+		portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
+
+		/* Calculate the reload value required to wait xExpectedIdleTime
+		tick periods.  -1 is used because this code will execute part way
+		through one of the tick periods. */
+		ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
+		if( ulReloadValue > ulStoppedTimerCompensation )
+		{
+			ulReloadValue -= ulStoppedTimerCompensation;
+		}
+
+		/* Enter a critical section but don't use the taskENTER_CRITICAL()
+		method as that will mask interrupts that should exit sleep mode. */
+		__disable_irq();
+		__dsb( portSY_FULL_READ_WRITE );
+		__isb( portSY_FULL_READ_WRITE );
+
+		/* If a context switch is pending or a task is waiting for the scheduler
+		to be unsuspended then abandon the low power entry. */
+		if( eTaskConfirmSleepModeStatus() == eAbortSleep )
+		{
+			/* Restart from whatever is left in the count register to complete
+			this tick period. */
+			portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+			/* Restart SysTick. */
+			portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+			/* Reset the reload register to the value required for normal tick
+			periods. */
+			portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+			/* Re-enable interrupts - see comments above __disable_irq() call
+			above. */
+			__enable_irq();
+		}
+		else
+		{
+			/* Set the new reload value. */
+			portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
+
+			/* Clear the SysTick count flag and set the count value back to
+			zero. */
+			portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+			/* Restart SysTick. */
+			portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+			/* Sleep until something happens.  configPRE_SLEEP_PROCESSING() can
+			set its parameter to 0 to indicate that its implementation contains
+			its own wait for interrupt or wait for event instruction, and so wfi
+			should not be executed again.  However, the original expected idle
+			time variable must remain unmodified, so a copy is taken. */
+			xModifiableIdleTime = xExpectedIdleTime;
+			configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
+			if( xModifiableIdleTime > 0 )
+			{
+				__dsb( portSY_FULL_READ_WRITE );
+				__wfi();
+				__isb( portSY_FULL_READ_WRITE );
+			}
+			configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
+
+			/* Stop SysTick.  Again, the time the SysTick is stopped for is
+			accounted for as best it can be, but using the tickless mode will
+			inevitably result in some tiny drift of the time maintained by the
+			kernel with respect to calendar time. */
+			ulSysTickCTRL = portNVIC_SYSTICK_CTRL_REG;
+			portNVIC_SYSTICK_CTRL_REG = ( ulSysTickCTRL & ~portNVIC_SYSTICK_ENABLE_BIT );
+
+			/* Re-enable interrupts - see comments above __disable_irq() call
+			above. */
+			__enable_irq();
+
+			if( ( ulSysTickCTRL & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
+			{
+				uint32_t ulCalculatedLoadValue;
+
+				/* The tick interrupt has already executed, and the SysTick
+				count reloaded with ulReloadValue.  Reset the
+				portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
+				period. */
+				ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
+
+				/* Don't allow a tiny value, or values that have somehow
+				underflowed because the post sleep hook did something
+				that took too long. */
+				if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
+				{
+					ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
+				}
+
+				portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
+
+				/* The tick interrupt handler will already have pended the tick
+				processing in the kernel.  As the pending tick will be
+				processed as soon as this function exits, the tick value
+				maintained by the tick is stepped forward by one less than the
+				time spent waiting. */
+				ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
+			}
+			else
+			{
+				/* Something other than the tick interrupt ended the sleep.
+				Work out how long the sleep lasted rounded to complete tick
+				periods (not the ulReload value which accounted for part
+				ticks). */
+				ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+				/* How many complete tick periods passed while the processor
+				was waiting? */
+				ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
+
+				/* The reload value is set to whatever fraction of a single tick
+				period remains. */
+				portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
+			}
+
+			/* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
+			again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
+			value.  The critical section is used to ensure the tick interrupt
+			can only execute once in the case that the reload register is near
+			zero. */
+			portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+			portENTER_CRITICAL();
+			{
+				portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+				vTaskStepTick( ulCompleteTickPeriods );
+				portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+			}
+			portEXIT_CRITICAL();
+		}
+	}
+
+#endif /* #if configUSE_TICKLESS_IDLE */
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Setup the SysTick timer to generate the tick interrupts at the required
+ * frequency.
+ */
+#if configOVERRIDE_DEFAULT_TICK_CONFIGURATION == 0
+
+	void vPortSetupTimerInterrupt( void )
+	{
+		/* Calculate the constants required to configure the tick interrupt. */
+		#if configUSE_TICKLESS_IDLE == 1
+		{
+			ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
+			xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
+			ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
+		}
+		#endif /* configUSE_TICKLESS_IDLE */
+
+		/* Configure SysTick to interrupt at the requested rate. */
+		portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
+		portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT );
+	}
+
+#endif /* configOVERRIDE_DEFAULT_TICK_CONFIGURATION */
+/*-----------------------------------------------------------*/
+
+__asm uint32_t vPortGetIPSR( void )
+{
+	PRESERVE8
+
+	mrs r0, ipsr
+	bx r14
+}
+/*-----------------------------------------------------------*/
+
+#if( configASSERT_DEFINED == 1 )
+
+	void vPortValidateInterruptPriority( void )
+	{
+	uint32_t ulCurrentInterrupt;
+	uint8_t ucCurrentPriority;
+
+		/* Obtain the number of the currently executing interrupt. */
+		ulCurrentInterrupt = vPortGetIPSR();
+
+		/* Is the interrupt number a user defined interrupt? */
+		if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER )
+		{
+			/* Look up the interrupt's priority. */
+			ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ];
+
+			/* The following assertion will fail if a service routine (ISR) for
+			an interrupt that has been assigned a priority above
+			configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API
+			function.  ISR safe FreeRTOS API functions must *only* be called
+			from interrupts that have been assigned a priority at or below
+			configMAX_SYSCALL_INTERRUPT_PRIORITY.
+
+			Numerically low interrupt priority numbers represent logically high
+			interrupt priorities, therefore the priority of the interrupt must
+			be set to a value equal to or numerically *higher* than
+			configMAX_SYSCALL_INTERRUPT_PRIORITY.
+
+			Interrupts that	use the FreeRTOS API must not be left at their
+			default priority of	zero as that is the highest possible priority,
+			which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY,
+			and	therefore also guaranteed to be invalid.
+
+			FreeRTOS maintains separate thread and ISR API functions to ensure
+			interrupt entry is as fast and simple as possible.
+
+			The following links provide detailed information:
+			http://www.freertos.org/RTOS-Cortex-M3-M4.html
+			http://www.freertos.org/FAQHelp.html */
+			configASSERT( ucCurrentPriority >= ucMaxSysCallPriority );
+		}
+
+		/* Priority grouping:  The interrupt controller (NVIC) allows the bits
+		that define each interrupt's priority to be split between bits that
+		define the interrupt's pre-emption priority bits and bits that define
+		the interrupt's sub-priority.  For simplicity all bits must be defined
+		to be pre-emption priority bits.  The following assertion will fail if
+		this is not the case (if some bits represent a sub-priority).
+
+		If the application only uses CMSIS libraries for interrupt
+		configuration then the correct setting can be achieved on all Cortex-M
+		devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the
+		scheduler.  Note however that some vendor specific peripheral libraries
+		assume a non-zero priority group setting, in which cases using a value
+		of zero will result in unpredicable behaviour. */
+		configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue );
+	}
+
+#endif /* configASSERT_DEFINED */
+
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM3/portmacro.h b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM3/portmacro.h
new file mode 100644
index 0000000000000000000000000000000000000000..25a69a2103b59e50c61df381f740953df581ed83
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM3/portmacro.h
@@ -0,0 +1,294 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+#define portCHAR		char
+#define portFLOAT		float
+#define portDOUBLE		double
+#define portLONG		long
+#define portSHORT		short
+#define portSTACK_TYPE	uint32_t
+#define portBASE_TYPE	long
+
+typedef portSTACK_TYPE StackType_t;
+typedef long BaseType_t;
+typedef unsigned long UBaseType_t;
+
+#if( configUSE_16_BIT_TICKS == 1 )
+	typedef uint16_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffff
+#else
+	typedef uint32_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+
+	/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
+	not need to be guarded with a critical section. */
+	#define portTICK_TYPE_IS_ATOMIC 1
+#endif
+/*-----------------------------------------------------------*/
+
+/* Architecture specifics. */
+#define portSTACK_GROWTH			( -1 )
+#define portTICK_PERIOD_MS			( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+#define portBYTE_ALIGNMENT			8
+
+/* Constants used with memory barrier intrinsics. */
+#define portSY_FULL_READ_WRITE		( 15 )
+
+/*-----------------------------------------------------------*/
+
+/* Scheduler utilities. */
+#define portYIELD()																\
+{																				\
+	/* Set a PendSV to request a context switch. */								\
+	portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;								\
+																				\
+	/* Barriers are normally not required but do ensure the code is completely	\
+	within the specified behaviour for the architecture. */						\
+	__dsb( portSY_FULL_READ_WRITE );											\
+	__isb( portSY_FULL_READ_WRITE );											\
+}
+/*-----------------------------------------------------------*/
+
+#define portNVIC_INT_CTRL_REG		( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
+#define portNVIC_PENDSVSET_BIT		( 1UL << 28UL )
+#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) portYIELD()
+#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
+/*-----------------------------------------------------------*/
+
+/* Critical section management. */
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+
+#define portDISABLE_INTERRUPTS()				vPortRaiseBASEPRI()
+#define portENABLE_INTERRUPTS()					vPortSetBASEPRI( 0 )
+#define portENTER_CRITICAL()					vPortEnterCritical()
+#define portEXIT_CRITICAL()						vPortExitCritical()
+#define portSET_INTERRUPT_MASK_FROM_ISR()		ulPortRaiseBASEPRI()
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x)	vPortSetBASEPRI(x)
+
+/*-----------------------------------------------------------*/
+
+/* Tickless idle/low power functionality. */
+#ifndef portSUPPRESS_TICKS_AND_SLEEP
+	extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
+	#define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
+#endif
+/*-----------------------------------------------------------*/
+
+/* Port specific optimisations. */
+#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
+	#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
+#endif
+
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
+
+	/* Check the configuration. */
+	#if( configMAX_PRIORITIES > 32 )
+		#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32.  It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
+	#endif
+
+	/* Store/clear the ready priorities in a bit map. */
+	#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
+	#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
+
+	/*-----------------------------------------------------------*/
+
+	#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) __clz( ( uxReadyPriorities ) ) )
+
+#endif /* taskRECORD_READY_PRIORITY */
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site.  These are
+not necessary for to use this port.  They are defined so the common demo files
+(which build with all the ports) will build. */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
+/*-----------------------------------------------------------*/
+
+#ifdef configASSERT
+	void vPortValidateInterruptPriority( void );
+	#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() 	vPortValidateInterruptPriority()
+#endif
+
+/* portNOP() is not required by this port. */
+#define portNOP()
+
+#define portINLINE __inline
+
+#ifndef portFORCE_INLINE
+	#define portFORCE_INLINE __forceinline
+#endif
+
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortSetBASEPRI( uint32_t ulBASEPRI )
+{
+	__asm
+	{
+		/* Barrier instructions are not used as this function is only used to
+		lower the BASEPRI value. */
+		msr basepri, ulBASEPRI
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortRaiseBASEPRI( void )
+{
+uint32_t ulNewBASEPRI = configMAX_SYSCALL_INTERRUPT_PRIORITY;
+
+	__asm
+	{
+		/* Set BASEPRI to the max syscall priority to effect a critical
+		section. */
+		msr basepri, ulNewBASEPRI
+		dsb
+		isb
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortClearBASEPRIFromISR( void )
+{
+	__asm
+	{
+		/* Set BASEPRI to 0 so no interrupts are masked.  This function is only
+		used to lower the mask in an interrupt, so memory barriers are not 
+		used. */
+		msr basepri, #0
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE uint32_t ulPortRaiseBASEPRI( void )
+{
+uint32_t ulReturn, ulNewBASEPRI = configMAX_SYSCALL_INTERRUPT_PRIORITY;
+
+	__asm
+	{
+		/* Set BASEPRI to the max syscall priority to effect a critical
+		section. */
+		mrs ulReturn, basepri
+		msr basepri, ulNewBASEPRI
+		dsb
+		isb
+	}
+
+	return ulReturn;
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE BaseType_t xPortIsInsideInterrupt( void )
+{
+uint32_t ulCurrentInterrupt;
+BaseType_t xReturn;
+
+	/* Obtain the number of the currently executing interrupt. */
+	__asm
+	{
+		mrs ulCurrentInterrupt, ipsr
+	}
+
+	if( ulCurrentInterrupt == 0 )
+	{
+		xReturn = pdFALSE;
+	}
+	else
+	{
+		xReturn = pdTRUE;
+	}
+
+	return xReturn;
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4F/port.c b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4F/port.c
new file mode 100644
index 0000000000000000000000000000000000000000..1dc1b5b005541e7ea7d251e64ca0c5b7c502d52f
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4F/port.c
@@ -0,0 +1,789 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+/*-----------------------------------------------------------
+ * Implementation of functions defined in portable.h for the ARM CM4F port.
+ *----------------------------------------------------------*/
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+#ifndef __TARGET_FPU_VFP
+	#error This port can only be used when the project options are configured to enable hardware floating point support.
+#endif
+
+#if configMAX_SYSCALL_INTERRUPT_PRIORITY == 0
+	#error configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0.  See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html
+#endif
+
+#ifndef configSYSTICK_CLOCK_HZ
+	#define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ
+	/* Ensure the SysTick is clocked at the same frequency as the core. */
+	#define portNVIC_SYSTICK_CLK_BIT	( 1UL << 2UL )
+#else
+	/* The way the SysTick is clocked is not modified in case it is not the same
+	as the core. */
+	#define portNVIC_SYSTICK_CLK_BIT	( 0 )
+#endif
+
+/* The __weak attribute does not work as you might expect with the Keil tools
+so the configOVERRIDE_DEFAULT_TICK_CONFIGURATION constant must be set to 1 if
+the application writer wants to provide their own implementation of
+vPortSetupTimerInterrupt().  Ensure configOVERRIDE_DEFAULT_TICK_CONFIGURATION
+is defined. */
+#ifndef configOVERRIDE_DEFAULT_TICK_CONFIGURATION
+	#define configOVERRIDE_DEFAULT_TICK_CONFIGURATION 0
+#endif
+
+/* Constants required to manipulate the core.  Registers first... */
+#define portNVIC_SYSTICK_CTRL_REG			( * ( ( volatile uint32_t * ) 0xe000e010 ) )
+#define portNVIC_SYSTICK_LOAD_REG			( * ( ( volatile uint32_t * ) 0xe000e014 ) )
+#define portNVIC_SYSTICK_CURRENT_VALUE_REG	( * ( ( volatile uint32_t * ) 0xe000e018 ) )
+#define portNVIC_SYSPRI2_REG				( * ( ( volatile uint32_t * ) 0xe000ed20 ) )
+/* ...then bits in the registers. */
+#define portNVIC_SYSTICK_INT_BIT			( 1UL << 1UL )
+#define portNVIC_SYSTICK_ENABLE_BIT			( 1UL << 0UL )
+#define portNVIC_SYSTICK_COUNT_FLAG_BIT		( 1UL << 16UL )
+#define portNVIC_PENDSVCLEAR_BIT 			( 1UL << 27UL )
+#define portNVIC_PEND_SYSTICK_CLEAR_BIT		( 1UL << 25UL )
+
+/* Constants used to detect a Cortex-M7 r0p1 core, which should use the ARM_CM7
+r0p1 port. */
+#define portCPUID							( * ( ( volatile uint32_t * ) 0xE000ed00 ) )
+#define portCORTEX_M7_r0p1_ID				( 0x410FC271UL )
+#define portCORTEX_M7_r0p0_ID				( 0x410FC270UL )
+
+#define portNVIC_PENDSV_PRI					( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL )
+#define portNVIC_SYSTICK_PRI				( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL )
+
+/* Constants required to check the validity of an interrupt priority. */
+#define portFIRST_USER_INTERRUPT_NUMBER		( 16 )
+#define portNVIC_IP_REGISTERS_OFFSET_16 	( 0xE000E3F0 )
+#define portAIRCR_REG						( * ( ( volatile uint32_t * ) 0xE000ED0C ) )
+#define portMAX_8_BIT_VALUE					( ( uint8_t ) 0xff )
+#define portTOP_BIT_OF_BYTE					( ( uint8_t ) 0x80 )
+#define portMAX_PRIGROUP_BITS				( ( uint8_t ) 7 )
+#define portPRIORITY_GROUP_MASK				( 0x07UL << 8UL )
+#define portPRIGROUP_SHIFT					( 8UL )
+
+/* Masks off all bits but the VECTACTIVE bits in the ICSR register. */
+#define portVECTACTIVE_MASK					( 0xFFUL )
+
+/* Constants required to manipulate the VFP. */
+#define portFPCCR					( ( volatile uint32_t * ) 0xe000ef34 ) /* Floating point context control register. */
+#define portASPEN_AND_LSPEN_BITS	( 0x3UL << 30UL )
+
+/* Constants required to set up the initial stack. */
+#define portINITIAL_XPSR			( 0x01000000 )
+#define portINITIAL_EXEC_RETURN		( 0xfffffffd )
+
+/* The systick is a 24-bit counter. */
+#define portMAX_24_BIT_NUMBER		( 0xffffffUL )
+
+/* A fiddle factor to estimate the number of SysTick counts that would have
+occurred while the SysTick counter is stopped during tickless idle
+calculations. */
+#define portMISSED_COUNTS_FACTOR	( 45UL )
+
+/* For strict compliance with the Cortex-M spec the task start address should
+have bit-0 clear, as it is loaded into the PC on exit from an ISR. */
+#define portSTART_ADDRESS_MASK		( ( StackType_t ) 0xfffffffeUL )
+
+/* Each task maintains its own interrupt status in the critical nesting
+variable. */
+static UBaseType_t uxCriticalNesting = 0xaaaaaaaa;
+
+/*
+ * Setup the timer to generate the tick interrupts.  The implementation in this
+ * file is weak to allow application writers to change the timer used to
+ * generate the tick interrupt.
+ */
+void vPortSetupTimerInterrupt( void );
+
+/*
+ * Exception handlers.
+ */
+void xPortPendSVHandler( void );
+void xPortSysTickHandler( void );
+void vPortSVCHandler( void );
+
+/*
+ * Start first task is a separate function so it can be tested in isolation.
+ */
+static void prvStartFirstTask( void );
+
+/*
+ * Functions defined in portasm.s to enable the VFP.
+ */
+static void prvEnableVFP( void );
+
+/*
+ * Used to catch tasks that attempt to return from their implementing function.
+ */
+static void prvTaskExitError( void );
+
+/*-----------------------------------------------------------*/
+
+/*
+ * The number of SysTick increments that make up one tick period.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+	static uint32_t ulTimerCountsForOneTick = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * The maximum number of tick periods that can be suppressed is limited by the
+ * 24 bit resolution of the SysTick timer.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+	static uint32_t xMaximumPossibleSuppressedTicks = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * Compensate for the CPU cycles that pass while the SysTick is stopped (low
+ * power functionality only.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+	static uint32_t ulStoppedTimerCompensation = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure
+ * FreeRTOS API functions are not called from interrupts that have been assigned
+ * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY.
+ */
+#if ( configASSERT_DEFINED == 1 )
+	 static uint8_t ucMaxSysCallPriority = 0;
+	 static uint32_t ulMaxPRIGROUPValue = 0;
+	 static const volatile uint8_t * const pcInterruptPriorityRegisters = ( uint8_t * ) portNVIC_IP_REGISTERS_OFFSET_16;
+#endif /* configASSERT_DEFINED */
+
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
+{
+	/* Simulate the stack frame as it would be created by a context switch
+	interrupt. */
+
+	/* Offset added to account for the way the MCU uses the stack on entry/exit
+	of interrupts, and to ensure alignment. */
+	pxTopOfStack--;
+
+	*pxTopOfStack = portINITIAL_XPSR;	/* xPSR */
+	pxTopOfStack--;
+	*pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK;	/* PC */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) prvTaskExitError;	/* LR */
+
+	/* Save code space by skipping register initialisation. */
+	pxTopOfStack -= 5;	/* R12, R3, R2 and R1. */
+	*pxTopOfStack = ( StackType_t ) pvParameters;	/* R0 */
+
+	/* A save method is being used that requires each task to maintain its
+	own exec return value. */
+	pxTopOfStack--;
+	*pxTopOfStack = portINITIAL_EXEC_RETURN;
+
+	pxTopOfStack -= 8;	/* R11, R10, R9, R8, R7, R6, R5 and R4. */
+
+	return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+static void prvTaskExitError( void )
+{
+	/* A function that implements a task must not exit or attempt to return to
+	its caller as there is nothing to return to.  If a task wants to exit it
+	should instead call vTaskDelete( NULL ).
+
+	Artificially force an assert() to be triggered if configASSERT() is
+	defined, then stop here so application writers can catch the error. */
+	configASSERT( uxCriticalNesting == ~0UL );
+	portDISABLE_INTERRUPTS();
+	for( ;; );
+}
+/*-----------------------------------------------------------*/
+
+__asm void vPortSVCHandler( void )
+{
+	PRESERVE8
+
+	/* Get the location of the current TCB. */
+	ldr	r3, =pxCurrentTCB
+	ldr r1, [r3]
+	ldr r0, [r1]
+	/* Pop the core registers. */
+	ldmia r0!, {r4-r11, r14}
+	msr psp, r0
+	isb
+	mov r0, #0
+	msr	basepri, r0
+	bx r14
+}
+/*-----------------------------------------------------------*/
+
+__asm void prvStartFirstTask( void )
+{
+	PRESERVE8
+
+	/* Use the NVIC offset register to locate the stack. */
+	ldr r0, =0xE000ED08
+	ldr r0, [r0]
+	ldr r0, [r0]
+	/* Set the msp back to the start of the stack. */
+	msr msp, r0
+	/* Globally enable interrupts. */
+	cpsie i
+	cpsie f
+	dsb
+	isb
+	/* Call SVC to start the first task. */
+	svc 0
+	nop
+	nop
+}
+/*-----------------------------------------------------------*/
+
+__asm void prvEnableVFP( void )
+{
+	PRESERVE8
+
+	/* The FPU enable bits are in the CPACR. */
+	ldr.w r0, =0xE000ED88
+	ldr	r1, [r0]
+
+	/* Enable CP10 and CP11 coprocessors, then save back. */
+	orr	r1, r1, #( 0xf << 20 )
+	str r1, [r0]
+	bx	r14
+	nop
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+BaseType_t xPortStartScheduler( void )
+{
+	/* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0.
+	See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */
+	configASSERT( configMAX_SYSCALL_INTERRUPT_PRIORITY );
+
+	/* This port can be used on all revisions of the Cortex-M7 core other than
+	the r0p1 parts.  r0p1 parts should use the port from the
+	/source/portable/GCC/ARM_CM7/r0p1 directory. */
+	configASSERT( portCPUID != portCORTEX_M7_r0p1_ID );
+	configASSERT( portCPUID != portCORTEX_M7_r0p0_ID );
+
+	#if( configASSERT_DEFINED == 1 )
+	{
+		volatile uint32_t ulOriginalPriority;
+		volatile uint8_t * const pucFirstUserPriorityRegister = ( uint8_t * ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER );
+		volatile uint8_t ucMaxPriorityValue;
+
+		/* Determine the maximum priority from which ISR safe FreeRTOS API
+		functions can be called.  ISR safe functions are those that end in
+		"FromISR".  FreeRTOS maintains separate thread and ISR API functions to
+		ensure interrupt entry is as fast and simple as possible.
+
+		Save the interrupt priority value that is about to be clobbered. */
+		ulOriginalPriority = *pucFirstUserPriorityRegister;
+
+		/* Determine the number of priority bits available.  First write to all
+		possible bits. */
+		*pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE;
+
+		/* Read the value back to see how many bits stuck. */
+		ucMaxPriorityValue = *pucFirstUserPriorityRegister;
+
+		/* The kernel interrupt priority should be set to the lowest
+		priority. */
+		configASSERT( ucMaxPriorityValue == ( configKERNEL_INTERRUPT_PRIORITY & ucMaxPriorityValue ) );
+
+		/* Use the same mask on the maximum system call priority. */
+		ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue;
+
+		/* Calculate the maximum acceptable priority group value for the number
+		of bits read back. */
+		ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS;
+		while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE )
+		{
+			ulMaxPRIGROUPValue--;
+			ucMaxPriorityValue <<= ( uint8_t ) 0x01;
+		}
+
+		/* Shift the priority group value back to its position within the AIRCR
+		register. */
+		ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT;
+		ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK;
+
+		/* Restore the clobbered interrupt priority register to its original
+		value. */
+		*pucFirstUserPriorityRegister = ulOriginalPriority;
+	}
+	#endif /* conifgASSERT_DEFINED */
+
+	/* Make PendSV and SysTick the lowest priority interrupts. */
+	portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI;
+	portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI;
+
+	/* Start the timer that generates the tick ISR.  Interrupts are disabled
+	here already. */
+	vPortSetupTimerInterrupt();
+
+	/* Initialise the critical nesting count ready for the first task. */
+	uxCriticalNesting = 0;
+
+	/* Ensure the VFP is enabled - it should be anyway. */
+	prvEnableVFP();
+
+	/* Lazy save always. */
+	*( portFPCCR ) |= portASPEN_AND_LSPEN_BITS;
+
+	/* Start the first task. */
+	prvStartFirstTask();
+
+	/* Should not get here! */
+	return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void )
+{
+	/* Not implemented in ports where there is nothing to return to.
+	Artificially force an assert. */
+	configASSERT( uxCriticalNesting == 1000UL );
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void )
+{
+	portDISABLE_INTERRUPTS();
+	uxCriticalNesting++;
+
+	/* This is not the interrupt safe version of the enter critical function so
+	assert() if it is being called from an interrupt context.  Only API
+	functions that end in "FromISR" can be used in an interrupt.  Only assert if
+	the critical nesting count is 1 to protect against recursive calls if the
+	assert function also uses a critical section. */
+	if( uxCriticalNesting == 1 )
+	{
+		configASSERT( ( portNVIC_INT_CTRL_REG & portVECTACTIVE_MASK ) == 0 );
+	}
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void )
+{
+	configASSERT( uxCriticalNesting );
+	uxCriticalNesting--;
+	if( uxCriticalNesting == 0 )
+	{
+		portENABLE_INTERRUPTS();
+	}
+}
+/*-----------------------------------------------------------*/
+
+__asm void xPortPendSVHandler( void )
+{
+	extern uxCriticalNesting;
+	extern pxCurrentTCB;
+	extern vTaskSwitchContext;
+
+	PRESERVE8
+
+	mrs r0, psp
+	isb
+	/* Get the location of the current TCB. */
+	ldr	r3, =pxCurrentTCB
+	ldr	r2, [r3]
+
+	/* Is the task using the FPU context?  If so, push high vfp registers. */
+	tst r14, #0x10
+	it eq
+	vstmdbeq r0!, {s16-s31}
+
+	/* Save the core registers. */
+	stmdb r0!, {r4-r11, r14}
+
+	/* Save the new top of stack into the first member of the TCB. */
+	str r0, [r2]
+
+	stmdb sp!, {r3}
+	mov r0, #configMAX_SYSCALL_INTERRUPT_PRIORITY
+	msr basepri, r0
+	dsb
+	isb
+	bl vTaskSwitchContext
+	mov r0, #0
+	msr basepri, r0
+	ldmia sp!, {r3}
+
+	/* The first item in pxCurrentTCB is the task top of stack. */
+	ldr r1, [r3]
+	ldr r0, [r1]
+
+	/* Pop the core registers. */
+	ldmia r0!, {r4-r11, r14}
+
+	/* Is the task using the FPU context?  If so, pop the high vfp registers
+	too. */
+	tst r14, #0x10
+	it eq
+	vldmiaeq r0!, {s16-s31}
+
+	msr psp, r0
+	isb
+	#ifdef WORKAROUND_PMU_CM001 /* XMC4000 specific errata */
+		#if WORKAROUND_PMU_CM001 == 1
+			push { r14 }
+			pop { pc }
+			nop
+		#endif
+	#endif
+
+	bx r14
+}
+/*-----------------------------------------------------------*/
+
+void xPortSysTickHandler( void )
+{
+	/* The SysTick runs at the lowest interrupt priority, so when this interrupt
+	executes all interrupts must be unmasked.  There is therefore no need to
+	save and then restore the interrupt mask value as its value is already
+	known - therefore the slightly faster vPortRaiseBASEPRI() function is used
+	in place of portSET_INTERRUPT_MASK_FROM_ISR(). */
+	vPortRaiseBASEPRI();
+	{
+		/* Increment the RTOS tick. */
+		if( xTaskIncrementTick() != pdFALSE )
+		{
+			/* A context switch is required.  Context switching is performed in
+			the PendSV interrupt.  Pend the PendSV interrupt. */
+			portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+		}
+	}
+	vPortClearBASEPRIFromISR();
+}
+/*-----------------------------------------------------------*/
+
+#if configUSE_TICKLESS_IDLE == 1
+
+	__weak void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
+	{
+	uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements, ulSysTickCTRL;
+	TickType_t xModifiableIdleTime;
+
+		/* Make sure the SysTick reload value does not overflow the counter. */
+		if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
+		{
+			xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
+		}
+
+		/* Stop the SysTick momentarily.  The time the SysTick is stopped for
+		is accounted for as best it can be, but using the tickless mode will
+		inevitably result in some tiny drift of the time maintained by the
+		kernel with respect to calendar time. */
+		portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
+
+		/* Calculate the reload value required to wait xExpectedIdleTime
+		tick periods.  -1 is used because this code will execute part way
+		through one of the tick periods. */
+		ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
+		if( ulReloadValue > ulStoppedTimerCompensation )
+		{
+			ulReloadValue -= ulStoppedTimerCompensation;
+		}
+
+		/* Enter a critical section but don't use the taskENTER_CRITICAL()
+		method as that will mask interrupts that should exit sleep mode. */
+		__disable_irq();
+		__dsb( portSY_FULL_READ_WRITE );
+		__isb( portSY_FULL_READ_WRITE );
+
+		/* If a context switch is pending or a task is waiting for the scheduler
+		to be unsuspended then abandon the low power entry. */
+		if( eTaskConfirmSleepModeStatus() == eAbortSleep )
+		{
+			/* Restart from whatever is left in the count register to complete
+			this tick period. */
+			portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+			/* Restart SysTick. */
+			portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+			/* Reset the reload register to the value required for normal tick
+			periods. */
+			portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+			/* Re-enable interrupts - see comments above __disable_irq() call
+			above. */
+			__enable_irq();
+		}
+		else
+		{
+			/* Set the new reload value. */
+			portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
+
+			/* Clear the SysTick count flag and set the count value back to
+			zero. */
+			portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+			/* Restart SysTick. */
+			portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+			/* Sleep until something happens.  configPRE_SLEEP_PROCESSING() can
+			set its parameter to 0 to indicate that its implementation contains
+			its own wait for interrupt or wait for event instruction, and so wfi
+			should not be executed again.  However, the original expected idle
+			time variable must remain unmodified, so a copy is taken. */
+			xModifiableIdleTime = xExpectedIdleTime;
+			configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
+			if( xModifiableIdleTime > 0 )
+			{
+				__dsb( portSY_FULL_READ_WRITE );
+				__wfi();
+				__isb( portSY_FULL_READ_WRITE );
+			}
+			configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
+
+			/* Stop SysTick.  Again, the time the SysTick is stopped for is
+			accounted for as best it can be, but using the tickless mode will
+			inevitably result in some tiny drift of the time maintained by the
+			kernel with respect to calendar time. */
+			ulSysTickCTRL = portNVIC_SYSTICK_CTRL_REG;
+			portNVIC_SYSTICK_CTRL_REG = ( ulSysTickCTRL & ~portNVIC_SYSTICK_ENABLE_BIT );
+
+			/* Re-enable interrupts - see comments above __disable_irq() call
+			above. */
+			__enable_irq();
+
+			if( ( ulSysTickCTRL & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
+			{
+				uint32_t ulCalculatedLoadValue;
+
+				/* The tick interrupt has already executed, and the SysTick
+				count reloaded with ulReloadValue.  Reset the
+				portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
+				period. */
+				ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
+
+				/* Don't allow a tiny value, or values that have somehow
+				underflowed because the post sleep hook did something
+				that took too long. */
+				if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
+				{
+					ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
+				}
+
+				portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
+
+				/* The tick interrupt handler will already have pended the tick
+				processing in the kernel.  As the pending tick will be
+				processed as soon as this function exits, the tick value
+				maintained by the tick is stepped forward by one less than the
+				time spent waiting. */
+				ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
+			}
+			else
+			{
+				/* Something other than the tick interrupt ended the sleep.
+				Work out how long the sleep lasted rounded to complete tick
+				periods (not the ulReload value which accounted for part
+				ticks). */
+				ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+				/* How many complete tick periods passed while the processor
+				was waiting? */
+				ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
+
+				/* The reload value is set to whatever fraction of a single tick
+				period remains. */
+				portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
+			}
+
+			/* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
+			again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
+			value.  The critical section is used to ensure the tick interrupt
+			can only execute once in the case that the reload register is near
+			zero. */
+			portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+			portENTER_CRITICAL();
+			{
+				portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+				vTaskStepTick( ulCompleteTickPeriods );
+				portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+			}
+			portEXIT_CRITICAL();
+		}
+	}
+
+#endif /* #if configUSE_TICKLESS_IDLE */
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Setup the SysTick timer to generate the tick interrupts at the required
+ * frequency.
+ */
+#if configOVERRIDE_DEFAULT_TICK_CONFIGURATION == 0
+
+	void vPortSetupTimerInterrupt( void )
+	{
+		/* Calculate the constants required to configure the tick interrupt. */
+		#if configUSE_TICKLESS_IDLE == 1
+		{
+			ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
+			xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
+			ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
+		}
+		#endif /* configUSE_TICKLESS_IDLE */
+
+		/* Configure SysTick to interrupt at the requested rate. */
+		portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
+		portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT );
+	}
+
+#endif /* configOVERRIDE_DEFAULT_TICK_CONFIGURATION */
+/*-----------------------------------------------------------*/
+
+__asm uint32_t vPortGetIPSR( void )
+{
+	PRESERVE8
+
+	mrs r0, ipsr
+	bx r14
+}
+/*-----------------------------------------------------------*/
+
+#if( configASSERT_DEFINED == 1 )
+
+	void vPortValidateInterruptPriority( void )
+	{
+	uint32_t ulCurrentInterrupt;
+	uint8_t ucCurrentPriority;
+
+		/* Obtain the number of the currently executing interrupt. */
+		ulCurrentInterrupt = vPortGetIPSR();
+
+		/* Is the interrupt number a user defined interrupt? */
+		if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER )
+		{
+			/* Look up the interrupt's priority. */
+			ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ];
+
+			/* The following assertion will fail if a service routine (ISR) for
+			an interrupt that has been assigned a priority above
+			configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API
+			function.  ISR safe FreeRTOS API functions must *only* be called
+			from interrupts that have been assigned a priority at or below
+			configMAX_SYSCALL_INTERRUPT_PRIORITY.
+
+			Numerically low interrupt priority numbers represent logically high
+			interrupt priorities, therefore the priority of the interrupt must
+			be set to a value equal to or numerically *higher* than
+			configMAX_SYSCALL_INTERRUPT_PRIORITY.
+
+			Interrupts that	use the FreeRTOS API must not be left at their
+			default priority of	zero as that is the highest possible priority,
+			which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY,
+			and	therefore also guaranteed to be invalid.
+
+			FreeRTOS maintains separate thread and ISR API functions to ensure
+			interrupt entry is as fast and simple as possible.
+
+			The following links provide detailed information:
+			http://www.freertos.org/RTOS-Cortex-M3-M4.html
+			http://www.freertos.org/FAQHelp.html */
+			configASSERT( ucCurrentPriority >= ucMaxSysCallPriority );
+		}
+
+		/* Priority grouping:  The interrupt controller (NVIC) allows the bits
+		that define each interrupt's priority to be split between bits that
+		define the interrupt's pre-emption priority bits and bits that define
+		the interrupt's sub-priority.  For simplicity all bits must be defined
+		to be pre-emption priority bits.  The following assertion will fail if
+		this is not the case (if some bits represent a sub-priority).
+
+		If the application only uses CMSIS libraries for interrupt
+		configuration then the correct setting can be achieved on all Cortex-M
+		devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the
+		scheduler.  Note however that some vendor specific peripheral libraries
+		assume a non-zero priority group setting, in which cases using a value
+		of zero will result in unpredicable behaviour. */
+		configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue );
+	}
+
+#endif /* configASSERT_DEFINED */
+
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4F/portmacro.h b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4F/portmacro.h
new file mode 100644
index 0000000000000000000000000000000000000000..25a69a2103b59e50c61df381f740953df581ed83
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4F/portmacro.h
@@ -0,0 +1,294 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+#define portCHAR		char
+#define portFLOAT		float
+#define portDOUBLE		double
+#define portLONG		long
+#define portSHORT		short
+#define portSTACK_TYPE	uint32_t
+#define portBASE_TYPE	long
+
+typedef portSTACK_TYPE StackType_t;
+typedef long BaseType_t;
+typedef unsigned long UBaseType_t;
+
+#if( configUSE_16_BIT_TICKS == 1 )
+	typedef uint16_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffff
+#else
+	typedef uint32_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+
+	/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
+	not need to be guarded with a critical section. */
+	#define portTICK_TYPE_IS_ATOMIC 1
+#endif
+/*-----------------------------------------------------------*/
+
+/* Architecture specifics. */
+#define portSTACK_GROWTH			( -1 )
+#define portTICK_PERIOD_MS			( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+#define portBYTE_ALIGNMENT			8
+
+/* Constants used with memory barrier intrinsics. */
+#define portSY_FULL_READ_WRITE		( 15 )
+
+/*-----------------------------------------------------------*/
+
+/* Scheduler utilities. */
+#define portYIELD()																\
+{																				\
+	/* Set a PendSV to request a context switch. */								\
+	portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;								\
+																				\
+	/* Barriers are normally not required but do ensure the code is completely	\
+	within the specified behaviour for the architecture. */						\
+	__dsb( portSY_FULL_READ_WRITE );											\
+	__isb( portSY_FULL_READ_WRITE );											\
+}
+/*-----------------------------------------------------------*/
+
+#define portNVIC_INT_CTRL_REG		( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
+#define portNVIC_PENDSVSET_BIT		( 1UL << 28UL )
+#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) portYIELD()
+#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
+/*-----------------------------------------------------------*/
+
+/* Critical section management. */
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+
+#define portDISABLE_INTERRUPTS()				vPortRaiseBASEPRI()
+#define portENABLE_INTERRUPTS()					vPortSetBASEPRI( 0 )
+#define portENTER_CRITICAL()					vPortEnterCritical()
+#define portEXIT_CRITICAL()						vPortExitCritical()
+#define portSET_INTERRUPT_MASK_FROM_ISR()		ulPortRaiseBASEPRI()
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x)	vPortSetBASEPRI(x)
+
+/*-----------------------------------------------------------*/
+
+/* Tickless idle/low power functionality. */
+#ifndef portSUPPRESS_TICKS_AND_SLEEP
+	extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
+	#define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
+#endif
+/*-----------------------------------------------------------*/
+
+/* Port specific optimisations. */
+#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
+	#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
+#endif
+
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
+
+	/* Check the configuration. */
+	#if( configMAX_PRIORITIES > 32 )
+		#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32.  It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
+	#endif
+
+	/* Store/clear the ready priorities in a bit map. */
+	#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
+	#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
+
+	/*-----------------------------------------------------------*/
+
+	#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) __clz( ( uxReadyPriorities ) ) )
+
+#endif /* taskRECORD_READY_PRIORITY */
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site.  These are
+not necessary for to use this port.  They are defined so the common demo files
+(which build with all the ports) will build. */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
+/*-----------------------------------------------------------*/
+
+#ifdef configASSERT
+	void vPortValidateInterruptPriority( void );
+	#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() 	vPortValidateInterruptPriority()
+#endif
+
+/* portNOP() is not required by this port. */
+#define portNOP()
+
+#define portINLINE __inline
+
+#ifndef portFORCE_INLINE
+	#define portFORCE_INLINE __forceinline
+#endif
+
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortSetBASEPRI( uint32_t ulBASEPRI )
+{
+	__asm
+	{
+		/* Barrier instructions are not used as this function is only used to
+		lower the BASEPRI value. */
+		msr basepri, ulBASEPRI
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortRaiseBASEPRI( void )
+{
+uint32_t ulNewBASEPRI = configMAX_SYSCALL_INTERRUPT_PRIORITY;
+
+	__asm
+	{
+		/* Set BASEPRI to the max syscall priority to effect a critical
+		section. */
+		msr basepri, ulNewBASEPRI
+		dsb
+		isb
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortClearBASEPRIFromISR( void )
+{
+	__asm
+	{
+		/* Set BASEPRI to 0 so no interrupts are masked.  This function is only
+		used to lower the mask in an interrupt, so memory barriers are not 
+		used. */
+		msr basepri, #0
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE uint32_t ulPortRaiseBASEPRI( void )
+{
+uint32_t ulReturn, ulNewBASEPRI = configMAX_SYSCALL_INTERRUPT_PRIORITY;
+
+	__asm
+	{
+		/* Set BASEPRI to the max syscall priority to effect a critical
+		section. */
+		mrs ulReturn, basepri
+		msr basepri, ulNewBASEPRI
+		dsb
+		isb
+	}
+
+	return ulReturn;
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE BaseType_t xPortIsInsideInterrupt( void )
+{
+uint32_t ulCurrentInterrupt;
+BaseType_t xReturn;
+
+	/* Obtain the number of the currently executing interrupt. */
+	__asm
+	{
+		mrs ulCurrentInterrupt, ipsr
+	}
+
+	if( ulCurrentInterrupt == 0 )
+	{
+		xReturn = pdFALSE;
+	}
+	else
+	{
+		xReturn = pdTRUE;
+	}
+
+	return xReturn;
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4_MPU/port.c b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4_MPU/port.c
new file mode 100644
index 0000000000000000000000000000000000000000..bbe2a96a88f4bb1cc45a1579e5f72e466ba92449
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4_MPU/port.c
@@ -0,0 +1,845 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+/*-----------------------------------------------------------
+ * Implementation of functions defined in portable.h for the ARM CM3 port.
+ *----------------------------------------------------------*/
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "queue.h"
+#include "event_groups.h"
+#include "mpu_prototypes.h"
+
+#ifndef __TARGET_FPU_VFP
+	#error This port can only be used when the project options are configured to enable hardware floating point support.
+#endif
+
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/* Constants required to access and manipulate the NVIC. */
+#define portNVIC_SYSTICK_CTRL_REG				( * ( ( volatile uint32_t * ) 0xe000e010 ) )
+#define portNVIC_SYSTICK_LOAD_REG				( * ( ( volatile uint32_t * ) 0xe000e014 ) )
+#define portNVIC_SYSPRI2_REG					( *	( ( volatile uint32_t * ) 0xe000ed20 ) )
+#define portNVIC_SYSPRI1_REG					( * ( ( volatile uint32_t * ) 0xe000ed1c ) )
+#define portNVIC_SYS_CTRL_STATE_REG				( * ( ( volatile uint32_t * ) 0xe000ed24 ) )
+#define portNVIC_MEM_FAULT_ENABLE				( 1UL << 16UL )
+
+/* Constants required to access and manipulate the MPU. */
+#define portMPU_TYPE_REG						( * ( ( volatile uint32_t * ) 0xe000ed90 ) )
+#define portMPU_REGION_BASE_ADDRESS_REG			( * ( ( volatile uint32_t * ) 0xe000ed9C ) )
+#define portMPU_REGION_ATTRIBUTE_REG			( * ( ( volatile uint32_t * ) 0xe000edA0 ) )
+#define portMPU_CTRL_REG						( * ( ( volatile uint32_t * ) 0xe000ed94 ) )
+#define portEXPECTED_MPU_TYPE_VALUE				( 8UL << 8UL ) /* 8 regions, unified. */
+#define portMPU_ENABLE							( 0x01UL )
+#define portMPU_BACKGROUND_ENABLE				( 1UL << 2UL )
+#define portPRIVILEGED_EXECUTION_START_ADDRESS	( 0UL )
+#define portMPU_REGION_VALID					( 0x10UL )
+#define portMPU_REGION_ENABLE					( 0x01UL )
+#define portPERIPHERALS_START_ADDRESS			0x40000000UL
+#define portPERIPHERALS_END_ADDRESS				0x5FFFFFFFUL
+
+/* Constants required to access and manipulate the SysTick. */
+#define portNVIC_SYSTICK_CLK					( 0x00000004UL )
+#define portNVIC_SYSTICK_INT					( 0x00000002UL )
+#define portNVIC_SYSTICK_ENABLE					( 0x00000001UL )
+#define portNVIC_PENDSV_PRI						( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL )
+#define portNVIC_SYSTICK_PRI					( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL )
+#define portNVIC_SVC_PRI						( ( ( uint32_t ) configMAX_SYSCALL_INTERRUPT_PRIORITY - 1UL ) << 24UL )
+
+/* Constants required to manipulate the VFP. */
+#define portFPCCR								( ( volatile uint32_t * ) 0xe000ef34UL ) /* Floating point context control register. */
+#define portASPEN_AND_LSPEN_BITS				( 0x3UL << 30UL )
+
+/* Constants required to set up the initial stack. */
+#define portINITIAL_XPSR						( 0x01000000UL )
+#define portINITIAL_EXEC_RETURN					( 0xfffffffdUL )
+#define portINITIAL_CONTROL_IF_UNPRIVILEGED		( 0x03 )
+#define portINITIAL_CONTROL_IF_PRIVILEGED		( 0x02 )
+
+/* Constants required to check the validity of an interrupt priority. */
+#define portFIRST_USER_INTERRUPT_NUMBER		( 16 )
+#define portNVIC_IP_REGISTERS_OFFSET_16 	( 0xE000E3F0 )
+#define portAIRCR_REG						( * ( ( volatile uint32_t * ) 0xE000ED0C ) )
+#define portMAX_8_BIT_VALUE					( ( uint8_t ) 0xff )
+#define portTOP_BIT_OF_BYTE					( ( uint8_t ) 0x80 )
+#define portMAX_PRIGROUP_BITS				( ( uint8_t ) 7 )
+#define portPRIORITY_GROUP_MASK				( 0x07UL << 8UL )
+#define portPRIGROUP_SHIFT					( 8UL )
+
+/* Offsets in the stack to the parameters when inside the SVC handler. */
+#define portOFFSET_TO_PC						( 6 )
+
+/* For strict compliance with the Cortex-M spec the task start address should
+have bit-0 clear, as it is loaded into the PC on exit from an ISR. */
+#define portSTART_ADDRESS_MASK				( ( StackType_t ) 0xfffffffeUL )
+
+/* Each task maintains its own interrupt status in the critical nesting
+variable.  Note this is not saved as part of the task context as context
+switches can only occur when uxCriticalNesting is zero. */
+static UBaseType_t uxCriticalNesting = 0xaaaaaaaa;
+
+/*
+ * Setup the timer to generate the tick interrupts.
+ */
+static void prvSetupTimerInterrupt( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Configure a number of standard MPU regions that are used by all tasks.
+ */
+static void prvSetupMPU( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Start first task is a separate function so it can be tested in isolation.
+ */
+static void prvStartFirstTask( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Return the smallest MPU region size that a given number of bytes will fit
+ * into.  The region size is returned as the value that should be programmed
+ * into the region attribute register for that region.
+ */
+static uint32_t prvGetMPURegionSizeSetting( uint32_t ulActualSizeInBytes ) PRIVILEGED_FUNCTION;
+
+/*
+ * Checks to see if being called from the context of an unprivileged task, and
+ * if so raises the privilege level and returns false - otherwise does nothing
+ * other than return true.
+ */
+BaseType_t xPortRaisePrivilege( void );
+
+/*
+ * Standard FreeRTOS exception handlers.
+ */
+void xPortPendSVHandler( void ) PRIVILEGED_FUNCTION;
+void xPortSysTickHandler( void ) PRIVILEGED_FUNCTION;
+void vPortSVCHandler( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Starts the scheduler by restoring the context of the first task to run.
+ */
+static void prvRestoreContextOfFirstTask( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * C portion of the SVC handler.  The SVC handler is split between an asm entry
+ * and a C wrapper for simplicity of coding and maintenance.
+ */
+void prvSVCHandler( uint32_t *pulRegisters ) __attribute__((used)) PRIVILEGED_FUNCTION;
+
+/*
+ * Function to enable the VFP.
+ */
+static void vPortEnableVFP( void );
+
+/*
+ * Utility function.
+ */
+static uint32_t prvPortGetIPSR( void );
+	
+/*
+ * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure
+ * FreeRTOS API functions are not called from interrupts that have been assigned
+ * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY.
+ */
+#if ( configASSERT_DEFINED == 1 )
+	 static uint8_t ucMaxSysCallPriority = 0;
+	 static uint32_t ulMaxPRIGROUPValue = 0;
+	 static const volatile uint8_t * const pcInterruptPriorityRegisters = ( const uint8_t * ) portNVIC_IP_REGISTERS_OFFSET_16;
+#endif /* configASSERT_DEFINED */
+
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged )
+{
+	/* Simulate the stack frame as it would be created by a context switch
+	interrupt. */
+	pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */
+	*pxTopOfStack = portINITIAL_XPSR;	/* xPSR */
+	pxTopOfStack--;
+	*pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK;	/* PC */
+	pxTopOfStack--;
+	*pxTopOfStack = 0;	/* LR */
+	pxTopOfStack -= 5;	/* R12, R3, R2 and R1. */
+	*pxTopOfStack = ( StackType_t ) pvParameters;	/* R0 */
+
+	/* A save method is being used that requires each task to maintain its
+	own exec return value. */
+	pxTopOfStack--;
+	*pxTopOfStack = portINITIAL_EXEC_RETURN;
+
+	pxTopOfStack -= 9;	/* R11, R10, R9, R8, R7, R6, R5 and R4. */
+
+	if( xRunPrivileged == pdTRUE )
+	{
+		*pxTopOfStack = portINITIAL_CONTROL_IF_PRIVILEGED;
+	}
+	else
+	{
+		*pxTopOfStack = portINITIAL_CONTROL_IF_UNPRIVILEGED;
+	}
+
+	return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+void prvSVCHandler( uint32_t *pulParam )
+{
+uint8_t ucSVCNumber;
+uint32_t ulReg;
+
+	/* The stack contains: r0, r1, r2, r3, r12, r14, the return address and
+	xPSR.  The first argument (r0) is pulParam[ 0 ]. */
+	ucSVCNumber = ( ( uint8_t * ) pulParam[ portOFFSET_TO_PC ] )[ -2 ];
+	switch( ucSVCNumber )
+	{
+		case portSVC_START_SCHEDULER	:	portNVIC_SYSPRI1_REG |= portNVIC_SVC_PRI;
+											prvRestoreContextOfFirstTask();
+											break;
+
+		case portSVC_YIELD				:	portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+											/* Barriers are normally not required
+											but do ensure the code is completely
+											within the specified behaviour for the
+											architecture. */
+											__asm volatile( "dsb" );
+											__asm volatile( "isb" );
+
+											break;
+
+		case portSVC_RAISE_PRIVILEGE	:	__asm
+											{
+												mrs ulReg, control	/* Obtain current control value. */
+												bic ulReg, #1		/* Set privilege bit. */
+												msr control, ulReg	/* Write back new control value. */
+											}
+											break;
+
+		default							:	/* Unknown SVC call. */
+											break;
+	}
+}
+/*-----------------------------------------------------------*/
+
+__asm void vPortSVCHandler( void )
+{
+	extern prvSVCHandler
+		
+	PRESERVE8
+
+	/* Assumes psp was in use. */
+	#ifndef USE_PROCESS_STACK	/* Code should not be required if a main() is using the process stack. */
+		tst lr, #4
+		ite eq
+		mrseq r0, msp
+		mrsne r0, psp
+	#else
+		mrs r0, psp
+	#endif
+		b prvSVCHandler
+}
+/*-----------------------------------------------------------*/
+
+__asm void prvRestoreContextOfFirstTask( void )
+{
+	PRESERVE8
+
+	ldr r0, =0xE000ED08				/* Use the NVIC offset register to locate the stack. */
+	ldr r0, [r0]
+	ldr r0, [r0]
+	msr msp, r0						/* Set the msp back to the start of the stack. */
+	ldr	r3, =pxCurrentTCB			/* Restore the context. */
+	ldr r1, [r3]
+	ldr r0, [r1]					/* The first item in the TCB is the task top of stack. */
+	add r1, r1, #4					/* Move onto the second item in the TCB... */
+	ldr r2, =0xe000ed9c				/* Region Base Address register. */
+	ldmia r1!, {r4-r11}				/* Read 4 sets of MPU registers. */
+	stmia r2!, {r4-r11}				/* Write 4 sets of MPU registers. */
+	ldmia r0!, {r3-r11, r14}	/* Pop the registers that are not automatically saved on exception entry. */
+	msr control, r3
+	msr psp, r0						/* Restore the task stack pointer. */
+	mov r0, #0
+	msr	basepri, r0
+	bx r14
+	nop
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+BaseType_t xPortStartScheduler( void )
+{
+	/* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0.  See
+	http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */
+	configASSERT( ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) );
+
+	#if( configASSERT_DEFINED == 1 )
+	{
+		volatile uint32_t ulOriginalPriority;
+		volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER );
+		volatile uint8_t ucMaxPriorityValue;
+
+		/* Determine the maximum priority from which ISR safe FreeRTOS API
+		functions can be called.  ISR safe functions are those that end in
+		"FromISR".  FreeRTOS maintains separate thread and ISR API functions to
+		ensure interrupt entry is as fast and simple as possible.
+
+		Save the interrupt priority value that is about to be clobbered. */
+		ulOriginalPriority = *pucFirstUserPriorityRegister;
+
+		/* Determine the number of priority bits available.  First write to all
+		possible bits. */
+		*pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE;
+
+		/* Read the value back to see how many bits stuck. */
+		ucMaxPriorityValue = *pucFirstUserPriorityRegister;
+
+		/* Use the same mask on the maximum system call priority. */
+		ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue;
+
+		/* Calculate the maximum acceptable priority group value for the number
+		of bits read back. */
+		ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS;
+		while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE )
+		{
+			ulMaxPRIGROUPValue--;
+			ucMaxPriorityValue <<= ( uint8_t ) 0x01;
+		}
+
+		/* Shift the priority group value back to its position within the AIRCR
+		register. */
+		ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT;
+		ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK;
+
+		/* Restore the clobbered interrupt priority register to its original
+		value. */
+		*pucFirstUserPriorityRegister = ulOriginalPriority;
+	}
+	#endif /* conifgASSERT_DEFINED */
+
+	/* Make PendSV and SysTick the same priority as the kernel, and the SVC
+	handler higher priority so it can be used to exit a critical section (where
+	lower priorities are masked). */
+	portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI;
+	portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI;
+
+	/* Configure the regions in the MPU that are common to all tasks. */
+	prvSetupMPU();
+
+	/* Start the timer that generates the tick ISR.  Interrupts are disabled
+	here already. */
+	prvSetupTimerInterrupt();
+
+	/* Initialise the critical nesting count ready for the first task. */
+	uxCriticalNesting = 0;
+
+	/* Ensure the VFP is enabled - it should be anyway. */
+	vPortEnableVFP();
+
+	/* Lazy save always. */
+	*( portFPCCR ) |= portASPEN_AND_LSPEN_BITS;
+
+	/* Start the first task. */
+	prvStartFirstTask();
+
+	/* Should not get here! */
+	return 0;
+}
+/*-----------------------------------------------------------*/
+
+__asm void prvStartFirstTask( void )
+{
+	PRESERVE8
+	
+	ldr r0, =0xE000ED08	/* Use the NVIC offset register to locate the stack. */
+	ldr r0, [r0]
+	ldr r0, [r0]
+	msr msp, r0			/* Set the msp back to the start of the stack. */
+	cpsie i				/* Globally enable interrupts. */
+	cpsie f
+	dsb
+	isb
+	svc portSVC_START_SCHEDULER	/* System call to start first task. */
+	nop
+	nop
+}
+
+void vPortEndScheduler( void )
+{
+	/* Not implemented in ports where there is nothing to return to.
+	Artificially force an assert. */
+	configASSERT( uxCriticalNesting == 1000UL );
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void )
+{
+BaseType_t xRunningPrivileged = xPortRaisePrivilege();
+
+	portDISABLE_INTERRUPTS();
+	uxCriticalNesting++;
+
+	vPortResetPrivilege( xRunningPrivileged );
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void )
+{
+BaseType_t xRunningPrivileged = xPortRaisePrivilege();
+
+	configASSERT( uxCriticalNesting );
+	uxCriticalNesting--;
+	if( uxCriticalNesting == 0 )
+	{
+		portENABLE_INTERRUPTS();
+	}
+	vPortResetPrivilege( xRunningPrivileged );
+}
+/*-----------------------------------------------------------*/
+
+__asm void xPortPendSVHandler( void )
+{
+	extern uxCriticalNesting;
+	extern pxCurrentTCB;
+	extern vTaskSwitchContext;
+
+	PRESERVE8
+
+	mrs r0, psp
+
+	ldr	r3, =pxCurrentTCB			/* Get the location of the current TCB. */
+	ldr	r2, [r3]
+
+	tst r14, #0x10					/* Is the task using the FPU context?  If so, push high vfp registers. */
+	it eq
+	vstmdbeq r0!, {s16-s31}
+
+	mrs r1, control
+	stmdb r0!, {r1, r4-r11, r14}	/* Save the remaining registers. */
+	str r0, [r2]					/* Save the new top of stack into the first member of the TCB. */
+
+	stmdb sp!, {r3}
+	mov r0, #configMAX_SYSCALL_INTERRUPT_PRIORITY
+	msr basepri, r0
+	dsb
+	isb
+	bl vTaskSwitchContext
+	mov r0, #0
+	msr basepri, r0
+	ldmia sp!, {r3}
+									/* Restore the context. */
+	ldr r1, [r3]
+	ldr r0, [r1]					/* The first item in the TCB is the task top of stack. */
+	add r1, r1, #4					/* Move onto the second item in the TCB... */
+	ldr r2, =0xe000ed9c				/* Region Base Address register. */
+	ldmia r1!, {r4-r11}				/* Read 4 sets of MPU registers. */
+	stmia r2!, {r4-r11}				/* Write 4 sets of MPU registers. */
+	ldmia r0!, {r3-r11, r14}		/* Pop the registers that are not automatically saved on exception entry. */
+	msr control, r3
+
+	tst r14, #0x10					/* Is the task using the FPU context?  If so, pop the high vfp registers too. */
+	it eq
+	vldmiaeq r0!, {s16-s31}
+
+	msr psp, r0
+	bx r14
+	nop
+}
+/*-----------------------------------------------------------*/
+
+void xPortSysTickHandler( void )
+{
+uint32_t ulDummy;
+
+	ulDummy = portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		/* Increment the RTOS tick. */
+		if( xTaskIncrementTick() != pdFALSE )
+		{
+			/* Pend a context switch. */
+			portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( ulDummy );
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * Setup the systick timer to generate the tick interrupts at the required
+ * frequency.
+ */
+static void prvSetupTimerInterrupt( void )
+{
+	/* Configure SysTick to interrupt at the requested rate. */
+	portNVIC_SYSTICK_LOAD_REG = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
+	portNVIC_SYSTICK_CTRL_REG = portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE;
+}
+/*-----------------------------------------------------------*/
+
+__asm void vPortSwitchToUserMode( void )
+{
+	PRESERVE8
+	
+	mrs r0, control
+	orr r0, #1
+	msr control, r0
+	bx r14
+}
+/*-----------------------------------------------------------*/
+	
+__asm void vPortEnableVFP( void )
+{
+	PRESERVE8
+	
+	ldr.w r0, =0xE000ED88		/* The FPU enable bits are in the CPACR. */
+	ldr r1, [r0]
+
+	orr r1, r1, #( 0xf << 20 )	/* Enable CP10 and CP11 coprocessors, then save back. */
+	str r1, [r0]
+	bx r14
+	nop
+	nop
+}
+/*-----------------------------------------------------------*/
+
+static void prvSetupMPU( void )
+{
+extern uint32_t __privileged_functions_end__;
+extern uint32_t __FLASH_segment_start__;
+extern uint32_t __FLASH_segment_end__;
+extern uint32_t __privileged_data_start__;
+extern uint32_t __privileged_data_end__;
+
+	/* Check the expected MPU is present. */
+	if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE )
+	{
+		/* First setup the entire flash for unprivileged read only access. */
+		portMPU_REGION_BASE_ADDRESS_REG =	( ( uint32_t ) __FLASH_segment_start__ ) | /* Base address. */
+											( portMPU_REGION_VALID ) |
+											( portUNPRIVILEGED_FLASH_REGION );
+
+		portMPU_REGION_ATTRIBUTE_REG =	( portMPU_REGION_READ_ONLY ) |
+										( portMPU_REGION_CACHEABLE_BUFFERABLE ) |
+										( prvGetMPURegionSizeSetting( ( uint32_t ) __FLASH_segment_end__ - ( uint32_t ) __FLASH_segment_start__ ) ) |
+										( portMPU_REGION_ENABLE );
+
+		/* Setup the first 16K for privileged only access (even though less
+		than 10K is actually being used).  This is where the kernel code is
+		placed. */
+		portMPU_REGION_BASE_ADDRESS_REG =	( ( uint32_t ) __FLASH_segment_start__ ) | /* Base address. */
+											( portMPU_REGION_VALID ) |
+											( portPRIVILEGED_FLASH_REGION );
+
+		portMPU_REGION_ATTRIBUTE_REG =	( portMPU_REGION_PRIVILEGED_READ_ONLY ) |
+										( portMPU_REGION_CACHEABLE_BUFFERABLE ) |
+										( prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_functions_end__ - ( uint32_t ) __FLASH_segment_start__ ) ) |
+										( portMPU_REGION_ENABLE );
+
+		/* Setup the privileged data RAM region.  This is where the kernel data
+		is placed. */
+		portMPU_REGION_BASE_ADDRESS_REG =	( ( uint32_t ) __privileged_data_start__ ) | /* Base address. */
+											( portMPU_REGION_VALID ) |
+											( portPRIVILEGED_RAM_REGION );
+
+		portMPU_REGION_ATTRIBUTE_REG =	( portMPU_REGION_PRIVILEGED_READ_WRITE ) |
+										( portMPU_REGION_CACHEABLE_BUFFERABLE ) |
+										prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_data_end__ - ( uint32_t ) __privileged_data_start__ ) |
+										( portMPU_REGION_ENABLE );
+
+		/* By default allow everything to access the general peripherals.  The
+		system peripherals and registers are protected. */
+		portMPU_REGION_BASE_ADDRESS_REG =	( portPERIPHERALS_START_ADDRESS ) |
+											( portMPU_REGION_VALID ) |
+											( portGENERAL_PERIPHERALS_REGION );
+
+		portMPU_REGION_ATTRIBUTE_REG =	( portMPU_REGION_READ_WRITE | portMPU_REGION_EXECUTE_NEVER ) |
+										( prvGetMPURegionSizeSetting( portPERIPHERALS_END_ADDRESS - portPERIPHERALS_START_ADDRESS ) ) |
+										( portMPU_REGION_ENABLE );
+
+		/* Enable the memory fault exception. */
+		portNVIC_SYS_CTRL_STATE_REG |= portNVIC_MEM_FAULT_ENABLE;
+
+		/* Enable the MPU with the background region configured. */
+		portMPU_CTRL_REG |= ( portMPU_ENABLE | portMPU_BACKGROUND_ENABLE );
+	}
+}
+/*-----------------------------------------------------------*/
+
+static uint32_t prvGetMPURegionSizeSetting( uint32_t ulActualSizeInBytes )
+{
+uint32_t ulRegionSize, ulReturnValue = 4;
+
+	/* 32 is the smallest region size, 31 is the largest valid value for
+	ulReturnValue. */
+	for( ulRegionSize = 32UL; ulReturnValue < 31UL; ( ulRegionSize <<= 1UL ) )
+	{
+		if( ulActualSizeInBytes <= ulRegionSize )
+		{
+			break;
+		}
+		else
+		{
+			ulReturnValue++;
+		}
+	}
+
+	/* Shift the code by one before returning so it can be written directly
+	into the the correct bit position of the attribute register. */
+	return ( ulReturnValue << 1UL );
+}
+/*-----------------------------------------------------------*/
+
+__asm BaseType_t xPortRaisePrivilege( void )
+{
+	mrs r0, control
+	tst r0, #1						/* Is the task running privileged? */
+	itte ne
+	movne r0, #0					/* CONTROL[0]!=0, return false. */
+	svcne portSVC_RAISE_PRIVILEGE	/* Switch to privileged. */
+	moveq r0, #1					/* CONTROL[0]==0, return true. */
+	bx lr
+}
+/*-----------------------------------------------------------*/
+
+void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth )
+{
+extern uint32_t __SRAM_segment_start__;
+extern uint32_t __SRAM_segment_end__;
+extern uint32_t __privileged_data_start__;
+extern uint32_t __privileged_data_end__;
+
+	
+int32_t lIndex;
+uint32_t ul;
+
+	if( xRegions == NULL )
+	{
+		/* No MPU regions are specified so allow access to all RAM. */
+		xMPUSettings->xRegion[ 0 ].ulRegionBaseAddress =
+				( ( uint32_t ) __SRAM_segment_start__ ) | /* Base address. */
+				( portMPU_REGION_VALID ) |
+				( portSTACK_REGION );
+
+		xMPUSettings->xRegion[ 0 ].ulRegionAttribute =
+				( portMPU_REGION_READ_WRITE ) |
+				( portMPU_REGION_CACHEABLE_BUFFERABLE ) |
+				( prvGetMPURegionSizeSetting( ( uint32_t ) __SRAM_segment_end__ - ( uint32_t ) __SRAM_segment_start__ ) ) |
+				( portMPU_REGION_ENABLE );
+
+		/* Re-instate the privileged only RAM region as xRegion[ 0 ] will have
+		just removed the privileged only parameters. */
+		xMPUSettings->xRegion[ 1 ].ulRegionBaseAddress =
+				( ( uint32_t ) __privileged_data_start__ ) | /* Base address. */
+				( portMPU_REGION_VALID ) |
+				( portSTACK_REGION + 1 );
+
+		xMPUSettings->xRegion[ 1 ].ulRegionAttribute =
+				( portMPU_REGION_PRIVILEGED_READ_WRITE ) |
+				( portMPU_REGION_CACHEABLE_BUFFERABLE ) |
+				prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_data_end__ - ( uint32_t ) __privileged_data_start__ ) |
+				( portMPU_REGION_ENABLE );
+
+		/* Invalidate all other regions. */
+		for( ul = 2; ul <= portNUM_CONFIGURABLE_REGIONS; ul++ )
+		{
+			xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( portSTACK_REGION + ul ) | portMPU_REGION_VALID;
+			xMPUSettings->xRegion[ ul ].ulRegionAttribute = 0UL;
+		}
+	}
+	else
+	{
+		/* This function is called automatically when the task is created - in
+		which case the stack region parameters will be valid.  At all other
+		times the stack parameters will not be valid and it is assumed that the
+		stack region has already been configured. */
+		if( ulStackDepth > 0 )
+		{
+			/* Define the region that allows access to the stack. */
+			xMPUSettings->xRegion[ 0 ].ulRegionBaseAddress =
+					( ( uint32_t ) pxBottomOfStack ) |
+					( portMPU_REGION_VALID ) |
+					( portSTACK_REGION ); /* Region number. */
+
+			xMPUSettings->xRegion[ 0 ].ulRegionAttribute =
+					( portMPU_REGION_READ_WRITE ) | /* Read and write. */
+					( prvGetMPURegionSizeSetting( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) ) |
+					( portMPU_REGION_CACHEABLE_BUFFERABLE ) |
+					( portMPU_REGION_ENABLE );
+		}
+
+		lIndex = 0;
+
+		for( ul = 1; ul <= portNUM_CONFIGURABLE_REGIONS; ul++ )
+		{
+			if( ( xRegions[ lIndex ] ).ulLengthInBytes > 0UL )
+			{
+				/* Translate the generic region definition contained in
+				xRegions into the CM3 specific MPU settings that are then
+				stored in xMPUSettings. */
+				xMPUSettings->xRegion[ ul ].ulRegionBaseAddress =
+						( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) |
+						( portMPU_REGION_VALID ) |
+						( portSTACK_REGION + ul ); /* Region number. */
+
+				xMPUSettings->xRegion[ ul ].ulRegionAttribute =
+						( prvGetMPURegionSizeSetting( xRegions[ lIndex ].ulLengthInBytes ) ) |
+						( xRegions[ lIndex ].ulParameters ) |
+						( portMPU_REGION_ENABLE );
+			}
+			else
+			{
+				/* Invalidate the region. */
+				xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( portSTACK_REGION + ul ) | portMPU_REGION_VALID;
+				xMPUSettings->xRegion[ ul ].ulRegionAttribute = 0UL;
+			}
+
+			lIndex++;
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+__asm uint32_t prvPortGetIPSR( void )
+{
+	PRESERVE8
+
+	mrs r0, ipsr
+	bx r14
+}
+/*-----------------------------------------------------------*/
+
+#if( configASSERT_DEFINED == 1 )
+
+	void vPortValidateInterruptPriority( void )
+	{
+	uint32_t ulCurrentInterrupt;
+	uint8_t ucCurrentPriority;
+
+		/* Obtain the number of the currently executing interrupt. */
+		ulCurrentInterrupt = prvPortGetIPSR();
+
+		/* Is the interrupt number a user defined interrupt? */
+		if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER )
+		{
+			/* Look up the interrupt's priority. */
+			ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ];
+
+			/* The following assertion will fail if a service routine (ISR) for
+			an interrupt that has been assigned a priority above
+			configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API
+			function.  ISR safe FreeRTOS API functions must *only* be called
+			from interrupts that have been assigned a priority at or below
+			configMAX_SYSCALL_INTERRUPT_PRIORITY.
+
+			Numerically low interrupt priority numbers represent logically high
+			interrupt priorities, therefore the priority of the interrupt must
+			be set to a value equal to or numerically *higher* than
+			configMAX_SYSCALL_INTERRUPT_PRIORITY.
+
+			Interrupts that	use the FreeRTOS API must not be left at their
+			default priority of	zero as that is the highest possible priority,
+			which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY,
+			and	therefore also guaranteed to be invalid.
+
+			FreeRTOS maintains separate thread and ISR API functions to ensure
+			interrupt entry is as fast and simple as possible.
+
+			The following links provide detailed information:
+			http://www.freertos.org/RTOS-Cortex-M3-M4.html
+			http://www.freertos.org/FAQHelp.html */
+			configASSERT( ucCurrentPriority >= ucMaxSysCallPriority );
+		}
+
+		/* Priority grouping:  The interrupt controller (NVIC) allows the bits
+		that define each interrupt's priority to be split between bits that
+		define the interrupt's pre-emption priority bits and bits that define
+		the interrupt's sub-priority.  For simplicity all bits must be defined
+		to be pre-emption priority bits.  The following assertion will fail if
+		this is not the case (if some bits represent a sub-priority).
+
+		If the application only uses CMSIS libraries for interrupt
+		configuration then the correct setting can be achieved on all Cortex-M
+		devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the
+		scheduler.  Note however that some vendor specific peripheral libraries
+		assume a non-zero priority group setting, in which cases using a value
+		of zero will result in unpredicable behaviour. */
+		configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue );
+	}
+
+#endif /* configASSERT_DEFINED */
+
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4_MPU/portmacro.h b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4_MPU/portmacro.h
new file mode 100644
index 0000000000000000000000000000000000000000..8d441eef6fe207e783dbd0ff58bd837a5c4ec287
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM4_MPU/portmacro.h
@@ -0,0 +1,348 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+#define portCHAR		char
+#define portFLOAT		float
+#define portDOUBLE		double
+#define portLONG		long
+#define portSHORT		short
+#define portSTACK_TYPE	uint32_t
+#define portBASE_TYPE	long
+
+typedef portSTACK_TYPE StackType_t;
+typedef long BaseType_t;
+typedef unsigned long UBaseType_t;
+
+#if( configUSE_16_BIT_TICKS == 1 )
+	typedef uint16_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffff
+#else
+	typedef uint32_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+
+	/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
+	not need to be guarded with a critical section. */
+	#define portTICK_TYPE_IS_ATOMIC 1
+#endif
+/*-----------------------------------------------------------*/
+
+/* MPU specific constants. */
+#define portUSING_MPU_WRAPPERS		1
+#define portPRIVILEGE_BIT			( 0x80000000UL )
+
+#define portMPU_REGION_READ_WRITE				( 0x03UL << 24UL )
+#define portMPU_REGION_PRIVILEGED_READ_ONLY		( 0x05UL << 24UL )
+#define portMPU_REGION_READ_ONLY				( 0x06UL << 24UL )
+#define portMPU_REGION_PRIVILEGED_READ_WRITE	( 0x01UL << 24UL )
+#define portMPU_REGION_CACHEABLE_BUFFERABLE		( 0x07UL << 16UL )
+#define portMPU_REGION_EXECUTE_NEVER			( 0x01UL << 28UL )
+
+#define portUNPRIVILEGED_FLASH_REGION		( 0UL )
+#define portPRIVILEGED_FLASH_REGION			( 1UL )
+#define portPRIVILEGED_RAM_REGION			( 2UL )
+#define portGENERAL_PERIPHERALS_REGION		( 3UL )
+#define portSTACK_REGION					( 4UL )
+#define portFIRST_CONFIGURABLE_REGION	    ( 5UL )
+#define portLAST_CONFIGURABLE_REGION		( 7UL )
+#define portNUM_CONFIGURABLE_REGIONS		( ( portLAST_CONFIGURABLE_REGION - portFIRST_CONFIGURABLE_REGION ) + 1 )
+#define portTOTAL_NUM_REGIONS				( portNUM_CONFIGURABLE_REGIONS + 1 ) /* Plus one to make space for the stack region. */
+
+void vPortSwitchToUserMode( void );
+#define portSWITCH_TO_USER_MODE()	vPortSwitchToUserMode()
+
+typedef struct MPU_REGION_REGISTERS
+{
+	uint32_t ulRegionBaseAddress;
+	uint32_t ulRegionAttribute;
+} xMPU_REGION_REGISTERS;
+
+/* Plus 1 to create space for the stack region. */
+typedef struct MPU_SETTINGS
+{
+	xMPU_REGION_REGISTERS xRegion[ portTOTAL_NUM_REGIONS ];
+} xMPU_SETTINGS;
+
+/* Architecture specifics. */
+#define portSTACK_GROWTH			( -1 )
+#define portTICK_PERIOD_MS			( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+#define portBYTE_ALIGNMENT			8
+
+/* Constants used with memory barrier intrinsics. */
+#define portSY_FULL_READ_WRITE		( 15 )
+
+/*-----------------------------------------------------------*/
+
+/* SVC numbers for various services. */
+#define portSVC_START_SCHEDULER				0
+#define portSVC_YIELD						1
+#define portSVC_RAISE_PRIVILEGE				2
+
+/* Scheduler utilities. */
+
+#define portYIELD()				__asm{ SVC portSVC_YIELD }
+#define portYIELD_WITHIN_API() 													\
+{																				\
+	/* Set a PendSV to request a context switch. */								\
+	portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;								\
+																				\
+	/* Barriers are normally not required but do ensure the code is completely	\
+	within the specified behaviour for the architecture. */						\
+	__dsb( portSY_FULL_READ_WRITE );											\
+	__isb( portSY_FULL_READ_WRITE );											\
+}
+/*-----------------------------------------------------------*/
+
+#define portNVIC_INT_CTRL_REG		( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
+#define portNVIC_PENDSVSET_BIT		( 1UL << 28UL )
+#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET
+#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
+/*-----------------------------------------------------------*/
+
+/* Critical section management. */
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+
+#define portDISABLE_INTERRUPTS()				vPortRaiseBASEPRI()
+#define portENABLE_INTERRUPTS()					vPortSetBASEPRI(0)
+#define portENTER_CRITICAL()					vPortEnterCritical()
+#define portEXIT_CRITICAL()						vPortExitCritical()
+#define portSET_INTERRUPT_MASK_FROM_ISR()		ulPortRaiseBASEPRI()
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x)	vPortSetBASEPRI(x)
+
+/*-----------------------------------------------------------*/
+
+/* Architecture specific optimisations. */
+#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
+	#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
+#endif
+
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
+
+	/* Check the configuration. */
+	#if( configMAX_PRIORITIES > 32 )
+		#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32.  It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
+	#endif
+
+	/* Store/clear the ready priorities in a bit map. */
+	#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
+	#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
+
+	/*-----------------------------------------------------------*/
+
+	#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) __clz( ( uxReadyPriorities ) ) )
+
+#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site.  These are
+not necessary for to use this port.  They are defined so the common demo files
+(which build with all the ports) will build. */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
+/*-----------------------------------------------------------*/
+
+#ifdef configASSERT
+	void vPortValidateInterruptPriority( void );
+	#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() 	vPortValidateInterruptPriority()
+#endif
+
+/* portNOP() is not required by this port. */
+#define portNOP()
+
+#define portINLINE __inline
+
+#ifndef portFORCE_INLINE
+	#define portFORCE_INLINE __forceinline
+#endif
+
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortSetBASEPRI( uint32_t ulBASEPRI )
+{
+	__asm
+	{
+		/* Barrier instructions are not used as this function is only used to
+		lower the BASEPRI value. */
+		msr basepri, ulBASEPRI
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortRaiseBASEPRI( void )
+{
+uint32_t ulNewBASEPRI = configMAX_SYSCALL_INTERRUPT_PRIORITY;
+
+	__asm
+	{
+		/* Set BASEPRI to the max syscall priority to effect a critical
+		section. */
+		msr basepri, ulNewBASEPRI
+		dsb
+		isb
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortClearBASEPRIFromISR( void )
+{
+	__asm
+	{
+		/* Set BASEPRI to 0 so no interrupts are masked.  This function is only
+		used to lower the mask in an interrupt, so memory barriers are not 
+		used. */
+		msr basepri, #0
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE uint32_t ulPortRaiseBASEPRI( void )
+{
+uint32_t ulReturn, ulNewBASEPRI = configMAX_SYSCALL_INTERRUPT_PRIORITY;
+
+	__asm
+	{
+		/* Set BASEPRI to the max syscall priority to effect a critical
+		section. */
+		mrs ulReturn, basepri
+		msr basepri, ulNewBASEPRI
+		dsb
+		isb
+	}
+
+	return ulReturn;
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE BaseType_t xPortIsInsideInterrupt( void )
+{
+uint32_t ulCurrentInterrupt;
+BaseType_t xReturn;
+
+	/* Obtain the number of the currently executing interrupt. */
+	__asm
+	{
+		mrs ulCurrentInterrupt, ipsr
+	}
+
+	if( ulCurrentInterrupt == 0 )
+	{
+		xReturn = pdFALSE;
+	}
+	else
+	{
+		xReturn = pdTRUE;
+	}
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+/* Set the privilege level to user mode if xRunningPrivileged is false. */
+portFORCE_INLINE static void vPortResetPrivilege( BaseType_t xRunningPrivileged )
+{
+uint32_t ulReg;
+	
+	if( xRunningPrivileged != pdTRUE ) 
+	{
+		__asm 
+		{
+			mrs ulReg, control
+			orr ulReg, #1
+			msr control, ulReg
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM7/ReadMe.txt b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM7/ReadMe.txt
new file mode 100644
index 0000000000000000000000000000000000000000..b3950da565f00543f60c1d02ba81303d5000dfc0
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM7/ReadMe.txt
@@ -0,0 +1,18 @@
+There are two options for running FreeRTOS on ARM Cortex-M7 microcontrollers.
+The best option depends on the revision of the ARM Cortex-M7 core in use.  The
+revision is specified by an 'r' number, and a 'p' number, so will look something
+like 'r0p1'.  Check the documentation for the microcontroller in use to find the 
+revision of the Cortex-M7 core used in that microcontroller.  If in doubt, use 
+the FreeRTOS port provided specifically for r0p1 revisions, as that can be used
+with all core revisions.
+
+The first option is to use the ARM Cortex-M4F port, and the second option is to
+use the Cortex-M7 r0p1 port - the latter containing a minor errata workaround.
+
+If the revision of the ARM Cortex-M7 core is not r0p1 then either option can be
+used, but it is recommended to use the FreeRTOS ARM Cortex-M4F port located in 
+the /FreeRTOS/Source/portable/RVDS/ARM_CM4F directory.
+
+If the revision of the ARM Cortex-M7 core is r0p1 then use the FreeRTOS ARM
+Cortex-M7 r0p1 port located in the /FreeRTOS/Source/portable/RVDS/ARM_CM7/r0p1
+directory.
\ No newline at end of file
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM7/r0p1/port.c b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM7/r0p1/port.c
new file mode 100644
index 0000000000000000000000000000000000000000..ef34402f689f7058b1802eabd226bbbbddbe259d
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM7/r0p1/port.c
@@ -0,0 +1,775 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+/*-----------------------------------------------------------
+ * Implementation of functions defined in portable.h for the ARM CM4F port.
+ *----------------------------------------------------------*/
+
+/* Scheduler includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+
+#ifndef __TARGET_FPU_VFP
+	#error This port can only be used when the project options are configured to enable hardware floating point support.
+#endif
+
+#if configMAX_SYSCALL_INTERRUPT_PRIORITY == 0
+	#error configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0.  See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html
+#endif
+
+#ifndef configSYSTICK_CLOCK_HZ
+	#define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ
+	/* Ensure the SysTick is clocked at the same frequency as the core. */
+	#define portNVIC_SYSTICK_CLK_BIT	( 1UL << 2UL )
+#else
+	/* The way the SysTick is clocked is not modified in case it is not the same
+	as the core. */
+	#define portNVIC_SYSTICK_CLK_BIT	( 0 )
+#endif
+
+/* The __weak attribute does not work as you might expect with the Keil tools
+so the configOVERRIDE_DEFAULT_TICK_CONFIGURATION constant must be set to 1 if
+the application writer wants to provide their own implementation of
+vPortSetupTimerInterrupt().  Ensure configOVERRIDE_DEFAULT_TICK_CONFIGURATION
+is defined. */
+#ifndef configOVERRIDE_DEFAULT_TICK_CONFIGURATION
+	#define configOVERRIDE_DEFAULT_TICK_CONFIGURATION 0
+#endif
+
+/* Constants required to manipulate the core.  Registers first... */
+#define portNVIC_SYSTICK_CTRL_REG			( * ( ( volatile uint32_t * ) 0xe000e010 ) )
+#define portNVIC_SYSTICK_LOAD_REG			( * ( ( volatile uint32_t * ) 0xe000e014 ) )
+#define portNVIC_SYSTICK_CURRENT_VALUE_REG	( * ( ( volatile uint32_t * ) 0xe000e018 ) )
+#define portNVIC_SYSPRI2_REG				( * ( ( volatile uint32_t * ) 0xe000ed20 ) )
+/* ...then bits in the registers. */
+#define portNVIC_SYSTICK_INT_BIT			( 1UL << 1UL )
+#define portNVIC_SYSTICK_ENABLE_BIT			( 1UL << 0UL )
+#define portNVIC_SYSTICK_COUNT_FLAG_BIT		( 1UL << 16UL )
+#define portNVIC_PENDSVCLEAR_BIT 			( 1UL << 27UL )
+#define portNVIC_PEND_SYSTICK_CLEAR_BIT		( 1UL << 25UL )
+
+#define portNVIC_PENDSV_PRI					( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL )
+#define portNVIC_SYSTICK_PRI				( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL )
+
+/* Constants required to check the validity of an interrupt priority. */
+#define portFIRST_USER_INTERRUPT_NUMBER		( 16 )
+#define portNVIC_IP_REGISTERS_OFFSET_16 	( 0xE000E3F0 )
+#define portAIRCR_REG						( * ( ( volatile uint32_t * ) 0xE000ED0C ) )
+#define portMAX_8_BIT_VALUE					( ( uint8_t ) 0xff )
+#define portTOP_BIT_OF_BYTE					( ( uint8_t ) 0x80 )
+#define portMAX_PRIGROUP_BITS				( ( uint8_t ) 7 )
+#define portPRIORITY_GROUP_MASK				( 0x07UL << 8UL )
+#define portPRIGROUP_SHIFT					( 8UL )
+
+/* Masks off all bits but the VECTACTIVE bits in the ICSR register. */
+#define portVECTACTIVE_MASK					( 0xFFUL )
+
+/* Constants required to manipulate the VFP. */
+#define portFPCCR					( ( volatile uint32_t * ) 0xe000ef34 ) /* Floating point context control register. */
+#define portASPEN_AND_LSPEN_BITS	( 0x3UL << 30UL )
+
+/* Constants required to set up the initial stack. */
+#define portINITIAL_XPSR			( 0x01000000 )
+#define portINITIAL_EXEC_RETURN		( 0xfffffffd )
+
+/* The systick is a 24-bit counter. */
+#define portMAX_24_BIT_NUMBER				( 0xffffffUL )
+
+/* A fiddle factor to estimate the number of SysTick counts that would have
+occurred while the SysTick counter is stopped during tickless idle
+calculations. */
+#define portMISSED_COUNTS_FACTOR			( 45UL )
+
+/* For strict compliance with the Cortex-M spec the task start address should
+have bit-0 clear, as it is loaded into the PC on exit from an ISR. */
+#define portSTART_ADDRESS_MASK				( ( StackType_t ) 0xfffffffeUL )
+
+/* Each task maintains its own interrupt status in the critical nesting
+variable. */
+static UBaseType_t uxCriticalNesting = 0xaaaaaaaa;
+
+/*
+ * Setup the timer to generate the tick interrupts.  The implementation in this
+ * file is weak to allow application writers to change the timer used to
+ * generate the tick interrupt.
+ */
+void vPortSetupTimerInterrupt( void );
+
+/*
+ * Exception handlers.
+ */
+void xPortPendSVHandler( void );
+void xPortSysTickHandler( void );
+void vPortSVCHandler( void );
+
+/*
+ * Start first task is a separate function so it can be tested in isolation.
+ */
+static void prvStartFirstTask( void );
+
+/*
+ * Functions defined in portasm.s to enable the VFP.
+ */
+static void prvEnableVFP( void );
+
+/*
+ * Used to catch tasks that attempt to return from their implementing function.
+ */
+static void prvTaskExitError( void );
+
+/*-----------------------------------------------------------*/
+
+/*
+ * The number of SysTick increments that make up one tick period.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+	static uint32_t ulTimerCountsForOneTick = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * The maximum number of tick periods that can be suppressed is limited by the
+ * 24 bit resolution of the SysTick timer.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+	static uint32_t xMaximumPossibleSuppressedTicks = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * Compensate for the CPU cycles that pass while the SysTick is stopped (low
+ * power functionality only.
+ */
+#if configUSE_TICKLESS_IDLE == 1
+	static uint32_t ulStoppedTimerCompensation = 0;
+#endif /* configUSE_TICKLESS_IDLE */
+
+/*
+ * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure
+ * FreeRTOS API functions are not called from interrupts that have been assigned
+ * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY.
+ */
+#if ( configASSERT_DEFINED == 1 )
+	 static uint8_t ucMaxSysCallPriority = 0;
+	 static uint32_t ulMaxPRIGROUPValue = 0;
+	 static const volatile uint8_t * const pcInterruptPriorityRegisters = ( uint8_t * ) portNVIC_IP_REGISTERS_OFFSET_16;
+#endif /* configASSERT_DEFINED */
+
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
+{
+	/* Simulate the stack frame as it would be created by a context switch
+	interrupt. */
+
+	/* Offset added to account for the way the MCU uses the stack on entry/exit
+	of interrupts, and to ensure alignment. */
+	pxTopOfStack--;
+
+	*pxTopOfStack = portINITIAL_XPSR;	/* xPSR */
+	pxTopOfStack--;
+	*pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK;	/* PC */
+	pxTopOfStack--;
+	*pxTopOfStack = ( StackType_t ) prvTaskExitError;	/* LR */
+
+	/* Save code space by skipping register initialisation. */
+	pxTopOfStack -= 5;	/* R12, R3, R2 and R1. */
+	*pxTopOfStack = ( StackType_t ) pvParameters;	/* R0 */
+
+	/* A save method is being used that requires each task to maintain its
+	own exec return value. */
+	pxTopOfStack--;
+	*pxTopOfStack = portINITIAL_EXEC_RETURN;
+
+	pxTopOfStack -= 8;	/* R11, R10, R9, R8, R7, R6, R5 and R4. */
+
+	return pxTopOfStack;
+}
+/*-----------------------------------------------------------*/
+
+static void prvTaskExitError( void )
+{
+	/* A function that implements a task must not exit or attempt to return to
+	its caller as there is nothing to return to.  If a task wants to exit it
+	should instead call vTaskDelete( NULL ).
+
+	Artificially force an assert() to be triggered if configASSERT() is
+	defined, then stop here so application writers can catch the error. */
+	configASSERT( uxCriticalNesting == ~0UL );
+	portDISABLE_INTERRUPTS();
+	for( ;; );
+}
+/*-----------------------------------------------------------*/
+
+__asm void vPortSVCHandler( void )
+{
+	PRESERVE8
+
+	/* Get the location of the current TCB. */
+	ldr	r3, =pxCurrentTCB
+	ldr r1, [r3]
+	ldr r0, [r1]
+	/* Pop the core registers. */
+	ldmia r0!, {r4-r11, r14}
+	msr psp, r0
+	isb
+	mov r0, #0
+	msr	basepri, r0
+	bx r14
+}
+/*-----------------------------------------------------------*/
+
+__asm void prvStartFirstTask( void )
+{
+	PRESERVE8
+
+	/* Use the NVIC offset register to locate the stack. */
+	ldr r0, =0xE000ED08
+	ldr r0, [r0]
+	ldr r0, [r0]
+	/* Set the msp back to the start of the stack. */
+	msr msp, r0
+	/* Globally enable interrupts. */
+	cpsie i
+	cpsie f
+	dsb
+	isb
+	/* Call SVC to start the first task. */
+	svc 0
+	nop
+	nop
+}
+/*-----------------------------------------------------------*/
+
+__asm void prvEnableVFP( void )
+{
+	PRESERVE8
+
+	/* The FPU enable bits are in the CPACR. */
+	ldr.w r0, =0xE000ED88
+	ldr	r1, [r0]
+
+	/* Enable CP10 and CP11 coprocessors, then save back. */
+	orr	r1, r1, #( 0xf << 20 )
+	str r1, [r0]
+	bx	r14
+	nop
+}
+/*-----------------------------------------------------------*/
+
+/*
+ * See header file for description.
+ */
+BaseType_t xPortStartScheduler( void )
+{
+	#if( configASSERT_DEFINED == 1 )
+	{
+		volatile uint32_t ulOriginalPriority;
+		volatile uint8_t * const pucFirstUserPriorityRegister = ( uint8_t * ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER );
+		volatile uint8_t ucMaxPriorityValue;
+
+		/* Determine the maximum priority from which ISR safe FreeRTOS API
+		functions can be called.  ISR safe functions are those that end in
+		"FromISR".  FreeRTOS maintains separate thread and ISR API functions to
+		ensure interrupt entry is as fast and simple as possible.
+
+		Save the interrupt priority value that is about to be clobbered. */
+		ulOriginalPriority = *pucFirstUserPriorityRegister;
+
+		/* Determine the number of priority bits available.  First write to all
+		possible bits. */
+		*pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE;
+
+		/* Read the value back to see how many bits stuck. */
+		ucMaxPriorityValue = *pucFirstUserPriorityRegister;
+
+		/* The kernel interrupt priority should be set to the lowest
+		priority. */
+		configASSERT( ucMaxPriorityValue == ( configKERNEL_INTERRUPT_PRIORITY & ucMaxPriorityValue ) );
+
+		/* Use the same mask on the maximum system call priority. */
+		ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue;
+
+		/* Calculate the maximum acceptable priority group value for the number
+		of bits read back. */
+		ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS;
+		while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE )
+		{
+			ulMaxPRIGROUPValue--;
+			ucMaxPriorityValue <<= ( uint8_t ) 0x01;
+		}
+
+		/* Shift the priority group value back to its position within the AIRCR
+		register. */
+		ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT;
+		ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK;
+
+		/* Restore the clobbered interrupt priority register to its original
+		value. */
+		*pucFirstUserPriorityRegister = ulOriginalPriority;
+	}
+	#endif /* conifgASSERT_DEFINED */
+
+	/* Make PendSV and SysTick the lowest priority interrupts. */
+	portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI;
+	portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI;
+
+	/* Start the timer that generates the tick ISR.  Interrupts are disabled
+	here already. */
+	vPortSetupTimerInterrupt();
+
+	/* Initialise the critical nesting count ready for the first task. */
+	uxCriticalNesting = 0;
+
+	/* Ensure the VFP is enabled - it should be anyway. */
+	prvEnableVFP();
+
+	/* Lazy save always. */
+	*( portFPCCR ) |= portASPEN_AND_LSPEN_BITS;
+
+	/* Start the first task. */
+	prvStartFirstTask();
+
+	/* Should not get here! */
+	return 0;
+}
+/*-----------------------------------------------------------*/
+
+void vPortEndScheduler( void )
+{
+	/* Not implemented in ports where there is nothing to return to.
+	Artificially force an assert. */
+	configASSERT( uxCriticalNesting == 1000UL );
+}
+/*-----------------------------------------------------------*/
+
+void vPortEnterCritical( void )
+{
+	portDISABLE_INTERRUPTS();
+	uxCriticalNesting++;
+
+	/* This is not the interrupt safe version of the enter critical function so
+	assert() if it is being called from an interrupt context.  Only API
+	functions that end in "FromISR" can be used in an interrupt.  Only assert if
+	the critical nesting count is 1 to protect against recursive calls if the
+	assert function also uses a critical section. */
+	if( uxCriticalNesting == 1 )
+	{
+		configASSERT( ( portNVIC_INT_CTRL_REG & portVECTACTIVE_MASK ) == 0 );
+	}
+}
+/*-----------------------------------------------------------*/
+
+void vPortExitCritical( void )
+{
+	configASSERT( uxCriticalNesting );
+	uxCriticalNesting--;
+	if( uxCriticalNesting == 0 )
+	{
+		portENABLE_INTERRUPTS();
+	}
+}
+/*-----------------------------------------------------------*/
+
+__asm void xPortPendSVHandler( void )
+{
+	extern uxCriticalNesting;
+	extern pxCurrentTCB;
+	extern vTaskSwitchContext;
+
+	PRESERVE8
+
+	mrs r0, psp
+	isb
+	/* Get the location of the current TCB. */
+	ldr	r3, =pxCurrentTCB
+	ldr	r2, [r3]
+
+	/* Is the task using the FPU context?  If so, push high vfp registers. */
+	tst r14, #0x10
+	it eq
+	vstmdbeq r0!, {s16-s31}
+
+	/* Save the core registers. */
+	stmdb r0!, {r4-r11, r14}
+
+	/* Save the new top of stack into the first member of the TCB. */
+	str r0, [r2]
+
+	stmdb sp!, {r3}
+	mov r0, #configMAX_SYSCALL_INTERRUPT_PRIORITY
+	cpsid i
+	msr basepri, r0
+	dsb
+	isb
+	cpsie i
+	bl vTaskSwitchContext
+	mov r0, #0
+	msr basepri, r0
+	ldmia sp!, {r3}
+
+	/* The first item in pxCurrentTCB is the task top of stack. */
+	ldr r1, [r3]
+	ldr r0, [r1]
+
+	/* Pop the core registers. */
+	ldmia r0!, {r4-r11, r14}
+
+	/* Is the task using the FPU context?  If so, pop the high vfp registers
+	too. */
+	tst r14, #0x10
+	it eq
+	vldmiaeq r0!, {s16-s31}
+
+	msr psp, r0
+	isb
+	#ifdef WORKAROUND_PMU_CM001 /* XMC4000 specific errata */
+		#if WORKAROUND_PMU_CM001 == 1
+			push { r14 }
+			pop { pc }
+			nop
+		#endif
+	#endif
+
+	bx r14
+}
+/*-----------------------------------------------------------*/
+
+void xPortSysTickHandler( void )
+{
+	/* The SysTick runs at the lowest interrupt priority, so when this interrupt
+	executes all interrupts must be unmasked.  There is therefore no need to
+	save and then restore the interrupt mask value as its value is already
+	known - therefore the slightly faster vPortRaiseBASEPRI() function is used
+	in place of portSET_INTERRUPT_MASK_FROM_ISR(). */
+	vPortRaiseBASEPRI();
+	{
+		/* Increment the RTOS tick. */
+		if( xTaskIncrementTick() != pdFALSE )
+		{
+			/* A context switch is required.  Context switching is performed in
+			the PendSV interrupt.  Pend the PendSV interrupt. */
+			portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;
+		}
+	}
+	vPortClearBASEPRIFromISR();
+}
+/*-----------------------------------------------------------*/
+
+#if configUSE_TICKLESS_IDLE == 1
+
+	__weak void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
+	{
+	uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements, ulSysTickCTRL;
+	TickType_t xModifiableIdleTime;
+
+		/* Make sure the SysTick reload value does not overflow the counter. */
+		if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
+		{
+			xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
+		}
+
+		/* Stop the SysTick momentarily.  The time the SysTick is stopped for
+		is accounted for as best it can be, but using the tickless mode will
+		inevitably result in some tiny drift of the time maintained by the
+		kernel with respect to calendar time. */
+		portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT;
+
+		/* Calculate the reload value required to wait xExpectedIdleTime
+		tick periods.  -1 is used because this code will execute part way
+		through one of the tick periods. */
+		ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) );
+		if( ulReloadValue > ulStoppedTimerCompensation )
+		{
+			ulReloadValue -= ulStoppedTimerCompensation;
+		}
+
+		/* Enter a critical section but don't use the taskENTER_CRITICAL()
+		method as that will mask interrupts that should exit sleep mode. */
+		__disable_irq();
+		__dsb( portSY_FULL_READ_WRITE );
+		__isb( portSY_FULL_READ_WRITE );
+
+		/* If a context switch is pending or a task is waiting for the scheduler
+		to be unsuspended then abandon the low power entry. */
+		if( eTaskConfirmSleepModeStatus() == eAbortSleep )
+		{
+			/* Restart from whatever is left in the count register to complete
+			this tick period. */
+			portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+			/* Restart SysTick. */
+			portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+			/* Reset the reload register to the value required for normal tick
+			periods. */
+			portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+
+			/* Re-enable interrupts - see comments above __disable_irq() call
+			above. */
+			__enable_irq();
+		}
+		else
+		{
+			/* Set the new reload value. */
+			portNVIC_SYSTICK_LOAD_REG = ulReloadValue;
+
+			/* Clear the SysTick count flag and set the count value back to
+			zero. */
+			portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+
+			/* Restart SysTick. */
+			portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+
+			/* Sleep until something happens.  configPRE_SLEEP_PROCESSING() can
+			set its parameter to 0 to indicate that its implementation contains
+			its own wait for interrupt or wait for event instruction, and so wfi
+			should not be executed again.  However, the original expected idle
+			time variable must remain unmodified, so a copy is taken. */
+			xModifiableIdleTime = xExpectedIdleTime;
+			configPRE_SLEEP_PROCESSING( xModifiableIdleTime );
+			if( xModifiableIdleTime > 0 )
+			{
+				__dsb( portSY_FULL_READ_WRITE );
+				__wfi();
+				__isb( portSY_FULL_READ_WRITE );
+			}
+			configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
+
+			/* Stop SysTick.  Again, the time the SysTick is stopped for is
+			accounted for as best it can be, but using the tickless mode will
+			inevitably result in some tiny drift of the time maintained by the
+			kernel with respect to calendar time. */
+			ulSysTickCTRL = portNVIC_SYSTICK_CTRL_REG;
+			portNVIC_SYSTICK_CTRL_REG = ( ulSysTickCTRL & ~portNVIC_SYSTICK_ENABLE_BIT );
+
+			/* Re-enable interrupts - see comments above __disable_irq() call
+			above. */
+			__enable_irq();
+
+			if( ( ulSysTickCTRL & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 )
+			{
+				uint32_t ulCalculatedLoadValue;
+
+				/* The tick interrupt has already executed, and the SysTick
+				count reloaded with ulReloadValue.  Reset the
+				portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick
+				period. */
+				ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG );
+
+				/* Don't allow a tiny value, or values that have somehow
+				underflowed because the post sleep hook did something
+				that took too long. */
+				if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) )
+				{
+					ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL );
+				}
+
+				portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue;
+
+				/* The tick interrupt handler will already have pended the tick
+				processing in the kernel.  As the pending tick will be
+				processed as soon as this function exits, the tick value
+				maintained by the tick is stepped forward by one less than the
+				time spent waiting. */
+				ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
+			}
+			else
+			{
+				/* Something other than the tick interrupt ended the sleep.
+				Work out how long the sleep lasted rounded to complete tick
+				periods (not the ulReload value which accounted for part
+				ticks). */
+				ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG;
+
+				/* How many complete tick periods passed while the processor
+				was waiting? */
+				ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick;
+
+				/* The reload value is set to whatever fraction of a single tick
+				period remains. */
+				portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements;
+			}
+
+			/* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG
+			again, then set portNVIC_SYSTICK_LOAD_REG back to its standard
+			value.  The critical section is used to ensure the tick interrupt
+			can only execute once in the case that the reload register is near
+			zero. */
+			portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL;
+			portENTER_CRITICAL();
+			{
+				portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT;
+				vTaskStepTick( ulCompleteTickPeriods );
+				portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL;
+			}
+			portEXIT_CRITICAL();
+		}
+	}
+
+#endif /* #if configUSE_TICKLESS_IDLE */
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Setup the SysTick timer to generate the tick interrupts at the required
+ * frequency.
+ */
+#if configOVERRIDE_DEFAULT_TICK_CONFIGURATION == 0
+
+	void vPortSetupTimerInterrupt( void )
+	{
+		/* Calculate the constants required to configure the tick interrupt. */
+		#if configUSE_TICKLESS_IDLE == 1
+		{
+			ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ );
+			xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick;
+			ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ );
+		}
+		#endif /* configUSE_TICKLESS_IDLE */
+
+		/* Configure SysTick to interrupt at the requested rate. */
+		portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
+		portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT );
+	}
+
+#endif /* configOVERRIDE_DEFAULT_TICK_CONFIGURATION */
+/*-----------------------------------------------------------*/
+
+__asm uint32_t vPortGetIPSR( void )
+{
+	PRESERVE8
+
+	mrs r0, ipsr
+	bx r14
+}
+/*-----------------------------------------------------------*/
+
+#if( configASSERT_DEFINED == 1 )
+
+	void vPortValidateInterruptPriority( void )
+	{
+	uint32_t ulCurrentInterrupt;
+	uint8_t ucCurrentPriority;
+
+		/* Obtain the number of the currently executing interrupt. */
+		ulCurrentInterrupt = vPortGetIPSR();
+
+		/* Is the interrupt number a user defined interrupt? */
+		if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER )
+		{
+			/* Look up the interrupt's priority. */
+			ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ];
+
+			/* The following assertion will fail if a service routine (ISR) for
+			an interrupt that has been assigned a priority above
+			configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API
+			function.  ISR safe FreeRTOS API functions must *only* be called
+			from interrupts that have been assigned a priority at or below
+			configMAX_SYSCALL_INTERRUPT_PRIORITY.
+
+			Numerically low interrupt priority numbers represent logically high
+			interrupt priorities, therefore the priority of the interrupt must
+			be set to a value equal to or numerically *higher* than
+			configMAX_SYSCALL_INTERRUPT_PRIORITY.
+
+			Interrupts that	use the FreeRTOS API must not be left at their
+			default priority of	zero as that is the highest possible priority,
+			which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY,
+			and	therefore also guaranteed to be invalid.
+
+			FreeRTOS maintains separate thread and ISR API functions to ensure
+			interrupt entry is as fast and simple as possible.
+
+			The following links provide detailed information:
+			http://www.freertos.org/RTOS-Cortex-M3-M4.html
+			http://www.freertos.org/FAQHelp.html */
+			configASSERT( ucCurrentPriority >= ucMaxSysCallPriority );
+		}
+
+		/* Priority grouping:  The interrupt controller (NVIC) allows the bits
+		that define each interrupt's priority to be split between bits that
+		define the interrupt's pre-emption priority bits and bits that define
+		the interrupt's sub-priority.  For simplicity all bits must be defined
+		to be pre-emption priority bits.  The following assertion will fail if
+		this is not the case (if some bits represent a sub-priority).
+
+		If the application only uses CMSIS libraries for interrupt
+		configuration then the correct setting can be achieved on all Cortex-M
+		devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the
+		scheduler.  Note however that some vendor specific peripheral libraries
+		assume a non-zero priority group setting, in which cases using a value
+		of zero will result in unpredicable behaviour. */
+		configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue );
+	}
+
+#endif /* configASSERT_DEFINED */
+
+
diff --git a/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM7/r0p1/portmacro.h b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM7/r0p1/portmacro.h
new file mode 100644
index 0000000000000000000000000000000000000000..a1562401c0ca5ccd6badfc8629b5de014e1c1648
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/RVDS/ARM_CM7/r0p1/portmacro.h
@@ -0,0 +1,298 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+
+#ifndef PORTMACRO_H
+#define PORTMACRO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*-----------------------------------------------------------
+ * Port specific definitions.
+ *
+ * The settings in this file configure FreeRTOS correctly for the
+ * given hardware and compiler.
+ *
+ * These settings should not be altered.
+ *-----------------------------------------------------------
+ */
+
+/* Type definitions. */
+#define portCHAR		char
+#define portFLOAT		float
+#define portDOUBLE		double
+#define portLONG		long
+#define portSHORT		short
+#define portSTACK_TYPE	uint32_t
+#define portBASE_TYPE	long
+
+typedef portSTACK_TYPE StackType_t;
+typedef long BaseType_t;
+typedef unsigned long UBaseType_t;
+
+#if( configUSE_16_BIT_TICKS == 1 )
+	typedef uint16_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffff
+#else
+	typedef uint32_t TickType_t;
+	#define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+
+	/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
+	not need to be guarded with a critical section. */
+	#define portTICK_TYPE_IS_ATOMIC 1
+#endif
+/*-----------------------------------------------------------*/
+
+/* Architecture specifics. */
+#define portSTACK_GROWTH			( -1 )
+#define portTICK_PERIOD_MS			( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+#define portBYTE_ALIGNMENT			8
+
+/* Constants used with memory barrier intrinsics. */
+#define portSY_FULL_READ_WRITE		( 15 )
+
+/*-----------------------------------------------------------*/
+
+/* Scheduler utilities. */
+#define portYIELD()																\
+{																				\
+	/* Set a PendSV to request a context switch. */								\
+	portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT;								\
+																				\
+	/* Barriers are normally not required but do ensure the code is completely	\
+	within the specified behaviour for the architecture. */						\
+	__dsb( portSY_FULL_READ_WRITE );											\
+	__isb( portSY_FULL_READ_WRITE );											\
+}
+/*-----------------------------------------------------------*/
+
+#define portNVIC_INT_CTRL_REG		( * ( ( volatile uint32_t * ) 0xe000ed04 ) )
+#define portNVIC_PENDSVSET_BIT		( 1UL << 28UL )
+#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) portYIELD()
+#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x )
+/*-----------------------------------------------------------*/
+
+/* Critical section management. */
+extern void vPortEnterCritical( void );
+extern void vPortExitCritical( void );
+
+#define portDISABLE_INTERRUPTS()				vPortRaiseBASEPRI()
+#define portENABLE_INTERRUPTS()					vPortSetBASEPRI( 0 )
+#define portENTER_CRITICAL()					vPortEnterCritical()
+#define portEXIT_CRITICAL()						vPortExitCritical()
+#define portSET_INTERRUPT_MASK_FROM_ISR()		ulPortRaiseBASEPRI()
+#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x )	vPortSetBASEPRI( x )
+
+/*-----------------------------------------------------------*/
+
+/* Tickless idle/low power functionality. */
+#ifndef portSUPPRESS_TICKS_AND_SLEEP
+	extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime );
+	#define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime )
+#endif
+/*-----------------------------------------------------------*/
+
+/* Port specific optimisations. */
+#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION
+	#define configUSE_PORT_OPTIMISED_TASK_SELECTION 1
+#endif
+
+#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1
+
+	/* Check the configuration. */
+	#if( configMAX_PRIORITIES > 32 )
+		#error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32.  It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice.
+	#endif
+
+	/* Store/clear the ready priorities in a bit map. */
+	#define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) )
+	#define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) )
+
+	/*-----------------------------------------------------------*/
+
+	#define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) __clz( ( uxReadyPriorities ) ) )
+
+#endif /* taskRECORD_READY_PRIORITY */
+/*-----------------------------------------------------------*/
+
+/* Task function macros as described on the FreeRTOS.org WEB site.  These are
+not necessary for to use this port.  They are defined so the common demo files
+(which build with all the ports) will build. */
+#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
+#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
+/*-----------------------------------------------------------*/
+
+#ifdef configASSERT
+	void vPortValidateInterruptPriority( void );
+	#define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() 	vPortValidateInterruptPriority()
+#endif
+
+/* portNOP() is not required by this port. */
+#define portNOP()
+
+#define portINLINE __inline
+
+#ifndef portFORCE_INLINE
+	#define portFORCE_INLINE __forceinline
+#endif
+
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortSetBASEPRI( uint32_t ulBASEPRI )
+{
+	__asm
+	{
+		/* Barrier instructions are not used as this function is only used to
+		lower the BASEPRI value. */
+		msr basepri, ulBASEPRI
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortRaiseBASEPRI( void )
+{
+uint32_t ulNewBASEPRI = configMAX_SYSCALL_INTERRUPT_PRIORITY;
+
+	__asm
+	{
+		/* Set BASEPRI to the max syscall priority to effect a critical
+		section. */
+		cpsid i
+		msr basepri, ulNewBASEPRI
+		dsb
+		isb
+		cpsie i
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE void vPortClearBASEPRIFromISR( void )
+{
+	__asm
+	{
+		/* Set BASEPRI to 0 so no interrupts are masked.  This function is only
+		used to lower the mask in an interrupt, so memory barriers are not 
+		used. */
+		msr basepri, #0
+	}
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE uint32_t ulPortRaiseBASEPRI( void )
+{
+uint32_t ulReturn, ulNewBASEPRI = configMAX_SYSCALL_INTERRUPT_PRIORITY;
+
+	__asm
+	{
+		/* Set BASEPRI to the max syscall priority to effect a critical
+		section. */
+		mrs ulReturn, basepri
+		cpsid i
+		msr basepri, ulNewBASEPRI
+		dsb
+		isb
+		cpsie i
+	}
+
+	return ulReturn;
+}
+/*-----------------------------------------------------------*/
+
+static portFORCE_INLINE BaseType_t xPortIsInsideInterrupt( void )
+{
+uint32_t ulCurrentInterrupt;
+BaseType_t xReturn;
+
+	/* Obtain the number of the currently executing interrupt. */
+	__asm
+	{
+		mrs ulCurrentInterrupt, ipsr
+	}
+
+	if( ulCurrentInterrupt == 0 )
+	{
+		xReturn = pdFALSE;
+	}
+	else
+	{
+		xReturn = pdTRUE;
+	}
+
+	return xReturn;
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PORTMACRO_H */
+
diff --git a/Program/XLLC/FreeRTOS/portable/readme.txt b/Program/XLLC/FreeRTOS/portable/readme.txt
new file mode 100644
index 0000000000000000000000000000000000000000..b22b36bf1e445f1ff5ad454228c6e81ae865809a
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/portable/readme.txt
@@ -0,0 +1,20 @@
+Each real time kernel port consists of three files that contain the core kernel
+components and are common to every port, and one or more files that are
+specific to a particular microcontroller and/or compiler.
+
+
++ The FreeRTOS/Source/Portable/MemMang directory contains the five sample
+memory allocators as described on the http://www.FreeRTOS.org WEB site.
+
++ The other directories each contain files specific to a particular
+microcontroller or compiler, where the directory name denotes the compiler
+specific files the directory contains.
+
+
+
+For example, if you are interested in the [compiler] port for the [architecture]
+microcontroller, then the port specific files are contained in
+FreeRTOS/Source/Portable/[compiler]/[architecture] directory.  If this is the
+only port you are interested in then all the other directories can be
+ignored.
+
diff --git a/Program/XLLC/FreeRTOS/queue.c b/Program/XLLC/FreeRTOS/queue.c
new file mode 100644
index 0000000000000000000000000000000000000000..9884658eb9cb79904d8a379f3b0f1534b767244a
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/queue.c
@@ -0,0 +1,2566 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+#include 
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+
+#if ( configUSE_CO_ROUTINES == 1 )
+	#include "croutine.h"
+#endif
+
+/* Lint e961 and e750 are suppressed as a MISRA exception justified because the
+MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined for the
+header files above, but not in this file, in order to generate the correct
+privileged Vs unprivileged linkage and placement. */
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750. */
+
+
+/* Constants used with the cRxLock and cTxLock structure members. */
+#define queueUNLOCKED					( ( int8_t ) -1 )
+#define queueLOCKED_UNMODIFIED			( ( int8_t ) 0 )
+
+/* When the Queue_t structure is used to represent a base queue its pcHead and
+pcTail members are used as pointers into the queue storage area.  When the
+Queue_t structure is used to represent a mutex pcHead and pcTail pointers are
+not necessary, and the pcHead pointer is set to NULL to indicate that the
+pcTail pointer actually points to the mutex holder (if any).  Map alternative
+names to the pcHead and pcTail structure members to ensure the readability of
+the code is maintained despite this dual use of two structure members.  An
+alternative implementation would be to use a union, but use of a union is
+against the coding standard (although an exception to the standard has been
+permitted where the dual use also significantly changes the type of the
+structure member). */
+#define pxMutexHolder					pcTail
+#define uxQueueType						pcHead
+#define queueQUEUE_IS_MUTEX				NULL
+
+/* Semaphores do not actually store or copy data, so have an item size of
+zero. */
+#define queueSEMAPHORE_QUEUE_ITEM_LENGTH ( ( UBaseType_t ) 0 )
+#define queueMUTEX_GIVE_BLOCK_TIME		 ( ( TickType_t ) 0U )
+
+#if( configUSE_PREEMPTION == 0 )
+	/* If the cooperative scheduler is being used then a yield should not be
+	performed just because a higher priority task has been woken. */
+	#define queueYIELD_IF_USING_PREEMPTION()
+#else
+	#define queueYIELD_IF_USING_PREEMPTION() portYIELD_WITHIN_API()
+#endif
+
+/*
+ * Definition of the queue used by the scheduler.
+ * Items are queued by copy, not reference.  See the following link for the
+ * rationale: http://www.freertos.org/Embedded-RTOS-Queues.html
+ */
+typedef struct QueueDefinition
+{
+	int8_t *pcHead;					/*< Points to the beginning of the queue storage area. */
+	int8_t *pcTail;					/*< Points to the byte at the end of the queue storage area.  Once more byte is allocated than necessary to store the queue items, this is used as a marker. */
+	int8_t *pcWriteTo;				/*< Points to the free next place in the storage area. */
+
+	union							/* Use of a union is an exception to the coding standard to ensure two mutually exclusive structure members don't appear simultaneously (wasting RAM). */
+	{
+		int8_t *pcReadFrom;			/*< Points to the last place that a queued item was read from when the structure is used as a queue. */
+		UBaseType_t uxRecursiveCallCount;/*< Maintains a count of the number of times a recursive mutex has been recursively 'taken' when the structure is used as a mutex. */
+	} u;
+
+	List_t xTasksWaitingToSend;		/*< List of tasks that are blocked waiting to post onto this queue.  Stored in priority order. */
+	List_t xTasksWaitingToReceive;	/*< List of tasks that are blocked waiting to read from this queue.  Stored in priority order. */
+
+	volatile UBaseType_t uxMessagesWaiting;/*< The number of items currently in the queue. */
+	UBaseType_t uxLength;			/*< The length of the queue defined as the number of items it will hold, not the number of bytes. */
+	UBaseType_t uxItemSize;			/*< The size of each items that the queue will hold. */
+
+	volatile int8_t cRxLock;		/*< Stores the number of items received from the queue (removed from the queue) while the queue was locked.  Set to queueUNLOCKED when the queue is not locked. */
+	volatile int8_t cTxLock;		/*< Stores the number of items transmitted to the queue (added to the queue) while the queue was locked.  Set to queueUNLOCKED when the queue is not locked. */
+
+	#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+		uint8_t ucStaticallyAllocated;	/*< Set to pdTRUE if the memory used by the queue was statically allocated to ensure no attempt is made to free the memory. */
+	#endif
+
+	#if ( configUSE_QUEUE_SETS == 1 )
+		struct QueueDefinition *pxQueueSetContainer;
+	#endif
+
+	#if ( configUSE_TRACE_FACILITY == 1 )
+		UBaseType_t uxQueueNumber;
+		uint8_t ucQueueType;
+	#endif
+
+} xQUEUE;
+
+/* The old xQUEUE name is maintained above then typedefed to the new Queue_t
+name below to enable the use of older kernel aware debuggers. */
+typedef xQUEUE Queue_t;
+
+/*-----------------------------------------------------------*/
+
+/*
+ * The queue registry is just a means for kernel aware debuggers to locate
+ * queue structures.  It has no other purpose so is an optional component.
+ */
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+	/* The type stored within the queue registry array.  This allows a name
+	to be assigned to each queue making kernel aware debugging a little
+	more user friendly. */
+	typedef struct QUEUE_REGISTRY_ITEM
+	{
+		const char *pcQueueName; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+		QueueHandle_t xHandle;
+	} xQueueRegistryItem;
+
+	/* The old xQueueRegistryItem name is maintained above then typedefed to the
+	new xQueueRegistryItem name below to enable the use of older kernel aware
+	debuggers. */
+	typedef xQueueRegistryItem QueueRegistryItem_t;
+
+	/* The queue registry is simply an array of QueueRegistryItem_t structures.
+	The pcQueueName member of a structure being NULL is indicative of the
+	array position being vacant. */
+	PRIVILEGED_DATA QueueRegistryItem_t xQueueRegistry[ configQUEUE_REGISTRY_SIZE ];
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+
+/*
+ * Unlocks a queue locked by a call to prvLockQueue.  Locking a queue does not
+ * prevent an ISR from adding or removing items to the queue, but does prevent
+ * an ISR from removing tasks from the queue event lists.  If an ISR finds a
+ * queue is locked it will instead increment the appropriate queue lock count
+ * to indicate that a task may require unblocking.  When the queue in unlocked
+ * these lock counts are inspected, and the appropriate action taken.
+ */
+static void prvUnlockQueue( Queue_t * const pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Uses a critical section to determine if there is any data in a queue.
+ *
+ * @return pdTRUE if the queue contains no items, otherwise pdFALSE.
+ */
+static BaseType_t prvIsQueueEmpty( const Queue_t *pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Uses a critical section to determine if there is any space in a queue.
+ *
+ * @return pdTRUE if there is no space, otherwise pdFALSE;
+ */
+static BaseType_t prvIsQueueFull( const Queue_t *pxQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Copies an item into the queue, either at the front of the queue or the
+ * back of the queue.
+ */
+static BaseType_t prvCopyDataToQueue( Queue_t * const pxQueue, const void *pvItemToQueue, const BaseType_t xPosition ) PRIVILEGED_FUNCTION;
+
+/*
+ * Copies an item out of a queue.
+ */
+static void prvCopyDataFromQueue( Queue_t * const pxQueue, void * const pvBuffer ) PRIVILEGED_FUNCTION;
+
+#if ( configUSE_QUEUE_SETS == 1 )
+	/*
+	 * Checks to see if a queue is a member of a queue set, and if so, notifies
+	 * the queue set that the queue contains data.
+	 */
+	static BaseType_t prvNotifyQueueSetContainer( const Queue_t * const pxQueue, const BaseType_t xCopyPosition ) PRIVILEGED_FUNCTION;
+#endif
+
+/*
+ * Called after a Queue_t structure has been allocated either statically or
+ * dynamically to fill in the structure's members.
+ */
+static void prvInitialiseNewQueue( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, const uint8_t ucQueueType, Queue_t *pxNewQueue ) PRIVILEGED_FUNCTION;
+
+/*
+ * Mutexes are a special type of queue.  When a mutex is created, first the
+ * queue is created, then prvInitialiseMutex() is called to configure the queue
+ * as a mutex.
+ */
+#if( configUSE_MUTEXES == 1 )
+	static void prvInitialiseMutex( Queue_t *pxNewQueue ) PRIVILEGED_FUNCTION;
+#endif
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Macro to mark a queue as locked.  Locking a queue prevents an ISR from
+ * accessing the queue event lists.
+ */
+#define prvLockQueue( pxQueue )								\
+	taskENTER_CRITICAL();									\
+	{														\
+		if( ( pxQueue )->cRxLock == queueUNLOCKED )			\
+		{													\
+			( pxQueue )->cRxLock = queueLOCKED_UNMODIFIED;	\
+		}													\
+		if( ( pxQueue )->cTxLock == queueUNLOCKED )			\
+		{													\
+			( pxQueue )->cTxLock = queueLOCKED_UNMODIFIED;	\
+		}													\
+	}														\
+	taskEXIT_CRITICAL()
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGenericReset( QueueHandle_t xQueue, BaseType_t xNewQueue )
+{
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+	configASSERT( pxQueue );
+
+	taskENTER_CRITICAL();
+	{
+		pxQueue->pcTail = pxQueue->pcHead + ( pxQueue->uxLength * pxQueue->uxItemSize );
+		pxQueue->uxMessagesWaiting = ( UBaseType_t ) 0U;
+		pxQueue->pcWriteTo = pxQueue->pcHead;
+		pxQueue->u.pcReadFrom = pxQueue->pcHead + ( ( pxQueue->uxLength - ( UBaseType_t ) 1U ) * pxQueue->uxItemSize );
+		pxQueue->cRxLock = queueUNLOCKED;
+		pxQueue->cTxLock = queueUNLOCKED;
+
+		if( xNewQueue == pdFALSE )
+		{
+			/* If there are tasks blocked waiting to read from the queue, then
+			the tasks will remain blocked as after this function exits the queue
+			will still be empty.  If there are tasks blocked waiting to write to
+			the queue, then one should be unblocked as after this function exits
+			it will be possible to write to it. */
+			if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+			{
+				if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+				{
+					queueYIELD_IF_USING_PREEMPTION();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			/* Ensure the event queues start in the correct state. */
+			vListInitialise( &( pxQueue->xTasksWaitingToSend ) );
+			vListInitialise( &( pxQueue->xTasksWaitingToReceive ) );
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	/* A value is returned for calling semantic consistency with previous
+	versions. */
+	return pdPASS;
+}
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+	QueueHandle_t xQueueGenericCreateStatic( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, StaticQueue_t *pxStaticQueue, const uint8_t ucQueueType )
+	{
+	Queue_t *pxNewQueue;
+
+		configASSERT( uxQueueLength > ( UBaseType_t ) 0 );
+
+		/* The StaticQueue_t structure and the queue storage area must be
+		supplied. */
+		configASSERT( pxStaticQueue != NULL );
+
+		/* A queue storage area should be provided if the item size is not 0, and
+		should not be provided if the item size is 0. */
+		configASSERT( !( ( pucQueueStorage != NULL ) && ( uxItemSize == 0 ) ) );
+		configASSERT( !( ( pucQueueStorage == NULL ) && ( uxItemSize != 0 ) ) );
+
+		#if( configASSERT_DEFINED == 1 )
+		{
+			/* Sanity check that the size of the structure used to declare a
+			variable of type StaticQueue_t or StaticSemaphore_t equals the size of
+			the real queue and semaphore structures. */
+			volatile size_t xSize = sizeof( StaticQueue_t );
+			configASSERT( xSize == sizeof( Queue_t ) );
+		}
+		#endif /* configASSERT_DEFINED */
+
+		/* The address of a statically allocated queue was passed in, use it.
+		The address of a statically allocated storage area was also passed in
+		but is already set. */
+		pxNewQueue = ( Queue_t * ) pxStaticQueue; /*lint !e740 Unusual cast is ok as the structures are designed to have the same alignment, and the size is checked by an assert. */
+
+		if( pxNewQueue != NULL )
+		{
+			#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+			{
+				/* Queues can be allocated wither statically or dynamically, so
+				note this queue was allocated statically in case the queue is
+				later deleted. */
+				pxNewQueue->ucStaticallyAllocated = pdTRUE;
+			}
+			#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+
+			prvInitialiseNewQueue( uxQueueLength, uxItemSize, pucQueueStorage, ucQueueType, pxNewQueue );
+		}
+
+		return pxNewQueue;
+	}
+
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+
+	QueueHandle_t xQueueGenericCreate( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, const uint8_t ucQueueType )
+	{
+	Queue_t *pxNewQueue;
+	size_t xQueueSizeInBytes;
+	uint8_t *pucQueueStorage;
+
+		configASSERT( uxQueueLength > ( UBaseType_t ) 0 );
+
+		if( uxItemSize == ( UBaseType_t ) 0 )
+		{
+			/* There is not going to be a queue storage area. */
+			xQueueSizeInBytes = ( size_t ) 0;
+		}
+		else
+		{
+			/* Allocate enough space to hold the maximum number of items that
+			can be in the queue at any time. */
+			xQueueSizeInBytes = ( size_t ) ( uxQueueLength * uxItemSize ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+		}
+
+		pxNewQueue = ( Queue_t * ) pvPortMalloc( sizeof( Queue_t ) + xQueueSizeInBytes );
+
+		if( pxNewQueue != NULL )
+		{
+			/* Jump past the queue structure to find the location of the queue
+			storage area. */
+			pucQueueStorage = ( ( uint8_t * ) pxNewQueue ) + sizeof( Queue_t );
+
+			#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+			{
+				/* Queues can be created either statically or dynamically, so
+				note this task was created dynamically in case it is later
+				deleted. */
+				pxNewQueue->ucStaticallyAllocated = pdFALSE;
+			}
+			#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+			prvInitialiseNewQueue( uxQueueLength, uxItemSize, pucQueueStorage, ucQueueType, pxNewQueue );
+		}
+
+		return pxNewQueue;
+	}
+
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseNewQueue( const UBaseType_t uxQueueLength, const UBaseType_t uxItemSize, uint8_t *pucQueueStorage, const uint8_t ucQueueType, Queue_t *pxNewQueue )
+{
+	/* Remove compiler warnings about unused parameters should
+	configUSE_TRACE_FACILITY not be set to 1. */
+	( void ) ucQueueType;
+
+	if( uxItemSize == ( UBaseType_t ) 0 )
+	{
+		/* No RAM was allocated for the queue storage area, but PC head cannot
+		be set to NULL because NULL is used as a key to say the queue is used as
+		a mutex.  Therefore just set pcHead to point to the queue as a benign
+		value that is known to be within the memory map. */
+		pxNewQueue->pcHead = ( int8_t * ) pxNewQueue;
+	}
+	else
+	{
+		/* Set the head to the start of the queue storage area. */
+		pxNewQueue->pcHead = ( int8_t * ) pucQueueStorage;
+	}
+
+	/* Initialise the queue members as described where the queue type is
+	defined. */
+	pxNewQueue->uxLength = uxQueueLength;
+	pxNewQueue->uxItemSize = uxItemSize;
+	( void ) xQueueGenericReset( pxNewQueue, pdTRUE );
+
+	#if ( configUSE_TRACE_FACILITY == 1 )
+	{
+		pxNewQueue->ucQueueType = ucQueueType;
+	}
+	#endif /* configUSE_TRACE_FACILITY */
+
+	#if( configUSE_QUEUE_SETS == 1 )
+	{
+		pxNewQueue->pxQueueSetContainer = NULL;
+	}
+	#endif /* configUSE_QUEUE_SETS */
+
+	traceQUEUE_CREATE( pxNewQueue );
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_MUTEXES == 1 )
+
+	static void prvInitialiseMutex( Queue_t *pxNewQueue )
+	{
+		if( pxNewQueue != NULL )
+		{
+			/* The queue create function will set all the queue structure members
+			correctly for a generic queue, but this function is creating a
+			mutex.  Overwrite those members that need to be set differently -
+			in particular the information required for priority inheritance. */
+			pxNewQueue->pxMutexHolder = NULL;
+			pxNewQueue->uxQueueType = queueQUEUE_IS_MUTEX;
+
+			/* In case this is a recursive mutex. */
+			pxNewQueue->u.uxRecursiveCallCount = 0;
+
+			traceCREATE_MUTEX( pxNewQueue );
+
+			/* Start with the semaphore in the expected state. */
+			( void ) xQueueGenericSend( pxNewQueue, NULL, ( TickType_t ) 0U, queueSEND_TO_BACK );
+		}
+		else
+		{
+			traceCREATE_MUTEX_FAILED();
+		}
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_MUTEXES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+	QueueHandle_t xQueueCreateMutex( const uint8_t ucQueueType )
+	{
+	Queue_t *pxNewQueue;
+	const UBaseType_t uxMutexLength = ( UBaseType_t ) 1, uxMutexSize = ( UBaseType_t ) 0;
+
+		pxNewQueue = ( Queue_t * ) xQueueGenericCreate( uxMutexLength, uxMutexSize, ucQueueType );
+		prvInitialiseMutex( pxNewQueue );
+
+		return pxNewQueue;
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_MUTEXES == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+
+	QueueHandle_t xQueueCreateMutexStatic( const uint8_t ucQueueType, StaticQueue_t *pxStaticQueue )
+	{
+	Queue_t *pxNewQueue;
+	const UBaseType_t uxMutexLength = ( UBaseType_t ) 1, uxMutexSize = ( UBaseType_t ) 0;
+
+		/* Prevent compiler warnings about unused parameters if
+		configUSE_TRACE_FACILITY does not equal 1. */
+		( void ) ucQueueType;
+
+		pxNewQueue = ( Queue_t * ) xQueueGenericCreateStatic( uxMutexLength, uxMutexSize, NULL, pxStaticQueue, ucQueueType );
+		prvInitialiseMutex( pxNewQueue );
+
+		return pxNewQueue;
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_MUTEXES == 1 ) && ( INCLUDE_xSemaphoreGetMutexHolder == 1 ) )
+
+	void* xQueueGetMutexHolder( QueueHandle_t xSemaphore )
+	{
+	void *pxReturn;
+
+		/* This function is called by xSemaphoreGetMutexHolder(), and should not
+		be called directly.  Note:  This is a good way of determining if the
+		calling task is the mutex holder, but not a good way of determining the
+		identity of the mutex holder, as the holder may change between the
+		following critical section exiting and the function returning. */
+		taskENTER_CRITICAL();
+		{
+			if( ( ( Queue_t * ) xSemaphore )->uxQueueType == queueQUEUE_IS_MUTEX )
+			{
+				pxReturn = ( void * ) ( ( Queue_t * ) xSemaphore )->pxMutexHolder;
+			}
+			else
+			{
+				pxReturn = NULL;
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		return pxReturn;
+	} /*lint !e818 xSemaphore cannot be a pointer to const because it is a typedef. */
+
+#endif
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_RECURSIVE_MUTEXES == 1 )
+
+	BaseType_t xQueueGiveMutexRecursive( QueueHandle_t xMutex )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxMutex = ( Queue_t * ) xMutex;
+
+		configASSERT( pxMutex );
+
+		/* If this is the task that holds the mutex then pxMutexHolder will not
+		change outside of this task.  If this task does not hold the mutex then
+		pxMutexHolder can never coincidentally equal the tasks handle, and as
+		this is the only condition we are interested in it does not matter if
+		pxMutexHolder is accessed simultaneously by another task.  Therefore no
+		mutual exclusion is required to test the pxMutexHolder variable. */
+		if( pxMutex->pxMutexHolder == ( void * ) xTaskGetCurrentTaskHandle() ) /*lint !e961 Not a redundant cast as TaskHandle_t is a typedef. */
+		{
+			traceGIVE_MUTEX_RECURSIVE( pxMutex );
+
+			/* uxRecursiveCallCount cannot be zero if pxMutexHolder is equal to
+			the task handle, therefore no underflow check is required.  Also,
+			uxRecursiveCallCount is only modified by the mutex holder, and as
+			there can only be one, no mutual exclusion is required to modify the
+			uxRecursiveCallCount member. */
+			( pxMutex->u.uxRecursiveCallCount )--;
+
+			/* Has the recursive call count unwound to 0? */
+			if( pxMutex->u.uxRecursiveCallCount == ( UBaseType_t ) 0 )
+			{
+				/* Return the mutex.  This will automatically unblock any other
+				task that might be waiting to access the mutex. */
+				( void ) xQueueGenericSend( pxMutex, NULL, queueMUTEX_GIVE_BLOCK_TIME, queueSEND_TO_BACK );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			/* The mutex cannot be given because the calling task is not the
+			holder. */
+			xReturn = pdFAIL;
+
+			traceGIVE_MUTEX_RECURSIVE_FAILED( pxMutex );
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_RECURSIVE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_RECURSIVE_MUTEXES == 1 )
+
+	BaseType_t xQueueTakeMutexRecursive( QueueHandle_t xMutex, TickType_t xTicksToWait )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxMutex = ( Queue_t * ) xMutex;
+
+		configASSERT( pxMutex );
+
+		/* Comments regarding mutual exclusion as per those within
+		xQueueGiveMutexRecursive(). */
+
+		traceTAKE_MUTEX_RECURSIVE( pxMutex );
+
+		if( pxMutex->pxMutexHolder == ( void * ) xTaskGetCurrentTaskHandle() ) /*lint !e961 Cast is not redundant as TaskHandle_t is a typedef. */
+		{
+			( pxMutex->u.uxRecursiveCallCount )++;
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = xQueueGenericReceive( pxMutex, NULL, xTicksToWait, pdFALSE );
+
+			/* pdPASS will only be returned if the mutex was successfully
+			obtained.  The calling task may have entered the Blocked state
+			before reaching here. */
+			if( xReturn != pdFAIL )
+			{
+				( pxMutex->u.uxRecursiveCallCount )++;
+			}
+			else
+			{
+				traceTAKE_MUTEX_RECURSIVE_FAILED( pxMutex );
+			}
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_RECURSIVE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+
+	QueueHandle_t xQueueCreateCountingSemaphoreStatic( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount, StaticQueue_t *pxStaticQueue )
+	{
+	QueueHandle_t xHandle;
+
+		configASSERT( uxMaxCount != 0 );
+		configASSERT( uxInitialCount <= uxMaxCount );
+
+		xHandle = xQueueGenericCreateStatic( uxMaxCount, queueSEMAPHORE_QUEUE_ITEM_LENGTH, NULL, pxStaticQueue, queueQUEUE_TYPE_COUNTING_SEMAPHORE );
+
+		if( xHandle != NULL )
+		{
+			( ( Queue_t * ) xHandle )->uxMessagesWaiting = uxInitialCount;
+
+			traceCREATE_COUNTING_SEMAPHORE();
+		}
+		else
+		{
+			traceCREATE_COUNTING_SEMAPHORE_FAILED();
+		}
+
+		return xHandle;
+	}
+
+#endif /* ( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+	QueueHandle_t xQueueCreateCountingSemaphore( const UBaseType_t uxMaxCount, const UBaseType_t uxInitialCount )
+	{
+	QueueHandle_t xHandle;
+
+		configASSERT( uxMaxCount != 0 );
+		configASSERT( uxInitialCount <= uxMaxCount );
+
+		xHandle = xQueueGenericCreate( uxMaxCount, queueSEMAPHORE_QUEUE_ITEM_LENGTH, queueQUEUE_TYPE_COUNTING_SEMAPHORE );
+
+		if( xHandle != NULL )
+		{
+			( ( Queue_t * ) xHandle )->uxMessagesWaiting = uxInitialCount;
+
+			traceCREATE_COUNTING_SEMAPHORE();
+		}
+		else
+		{
+			traceCREATE_COUNTING_SEMAPHORE_FAILED();
+		}
+
+		return xHandle;
+	}
+
+#endif /* ( ( configUSE_COUNTING_SEMAPHORES == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGenericSend( QueueHandle_t xQueue, const void * const pvItemToQueue, TickType_t xTicksToWait, const BaseType_t xCopyPosition )
+{
+BaseType_t xEntryTimeSet = pdFALSE, xYieldRequired;
+TimeOut_t xTimeOut;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+	configASSERT( pxQueue );
+	configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+	configASSERT( !( ( xCopyPosition == queueOVERWRITE ) && ( pxQueue->uxLength != 1 ) ) );
+	#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
+	{
+		configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
+	}
+	#endif
+
+
+	/* This function relaxes the coding standard somewhat to allow return
+	statements within the function itself.  This is done in the interest
+	of execution time efficiency. */
+	for( ;; )
+	{
+		taskENTER_CRITICAL();
+		{
+			/* Is there room on the queue now?  The running task must be the
+			highest priority task wanting to access the queue.  If the head item
+			in the queue is to be overwritten then it does not matter if the
+			queue is full. */
+			if( ( pxQueue->uxMessagesWaiting < pxQueue->uxLength ) || ( xCopyPosition == queueOVERWRITE ) )
+			{
+				traceQUEUE_SEND( pxQueue );
+				xYieldRequired = prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
+
+				#if ( configUSE_QUEUE_SETS == 1 )
+				{
+					if( pxQueue->pxQueueSetContainer != NULL )
+					{
+						if( prvNotifyQueueSetContainer( pxQueue, xCopyPosition ) != pdFALSE )
+						{
+							/* The queue is a member of a queue set, and posting
+							to the queue set caused a higher priority task to
+							unblock. A context switch is required. */
+							queueYIELD_IF_USING_PREEMPTION();
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						/* If there was a task waiting for data to arrive on the
+						queue then unblock it now. */
+						if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+						{
+							if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+							{
+								/* The unblocked task has a priority higher than
+								our own so yield immediately.  Yes it is ok to
+								do this from within the critical section - the
+								kernel takes care of that. */
+								queueYIELD_IF_USING_PREEMPTION();
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else if( xYieldRequired != pdFALSE )
+						{
+							/* This path is a special case that will only get
+							executed if the task was holding multiple mutexes
+							and the mutexes were given back in an order that is
+							different to that in which they were taken. */
+							queueYIELD_IF_USING_PREEMPTION();
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+				}
+				#else /* configUSE_QUEUE_SETS */
+				{
+					/* If there was a task waiting for data to arrive on the
+					queue then unblock it now. */
+					if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+					{
+						if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+						{
+							/* The unblocked task has a priority higher than
+							our own so yield immediately.  Yes it is ok to do
+							this from within the critical section - the kernel
+							takes care of that. */
+							queueYIELD_IF_USING_PREEMPTION();
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else if( xYieldRequired != pdFALSE )
+					{
+						/* This path is a special case that will only get
+						executed if the task was holding multiple mutexes and
+						the mutexes were given back in an order that is
+						different to that in which they were taken. */
+						queueYIELD_IF_USING_PREEMPTION();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				#endif /* configUSE_QUEUE_SETS */
+
+				taskEXIT_CRITICAL();
+				return pdPASS;
+			}
+			else
+			{
+				if( xTicksToWait == ( TickType_t ) 0 )
+				{
+					/* The queue was full and no block time is specified (or
+					the block time has expired) so leave now. */
+					taskEXIT_CRITICAL();
+
+					/* Return to the original privilege level before exiting
+					the function. */
+					traceQUEUE_SEND_FAILED( pxQueue );
+					return errQUEUE_FULL;
+				}
+				else if( xEntryTimeSet == pdFALSE )
+				{
+					/* The queue was full and a block time was specified so
+					configure the timeout structure. */
+					vTaskSetTimeOutState( &xTimeOut );
+					xEntryTimeSet = pdTRUE;
+				}
+				else
+				{
+					/* Entry time was already set. */
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		/* Interrupts and other tasks can send to and receive from the queue
+		now the critical section has been exited. */
+
+		vTaskSuspendAll();
+		prvLockQueue( pxQueue );
+
+		/* Update the timeout state to see if it has expired yet. */
+		if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+		{
+			if( prvIsQueueFull( pxQueue ) != pdFALSE )
+			{
+				traceBLOCKING_ON_QUEUE_SEND( pxQueue );
+				vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToSend ), xTicksToWait );
+
+				/* Unlocking the queue means queue events can effect the
+				event list.  It is possible	that interrupts occurring now
+				remove this task from the event	list again - but as the
+				scheduler is suspended the task will go onto the pending
+				ready last instead of the actual ready list. */
+				prvUnlockQueue( pxQueue );
+
+				/* Resuming the scheduler will move tasks from the pending
+				ready list into the ready list - so it is feasible that this
+				task is already in a ready list before it yields - in which
+				case the yield will not cause a context switch unless there
+				is also a higher priority task in the pending ready list. */
+				if( xTaskResumeAll() == pdFALSE )
+				{
+					portYIELD_WITHIN_API();
+				}
+			}
+			else
+			{
+				/* Try again. */
+				prvUnlockQueue( pxQueue );
+				( void ) xTaskResumeAll();
+			}
+		}
+		else
+		{
+			/* The timeout has expired. */
+			prvUnlockQueue( pxQueue );
+			( void ) xTaskResumeAll();
+
+			traceQUEUE_SEND_FAILED( pxQueue );
+			return errQUEUE_FULL;
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGenericSendFromISR( QueueHandle_t xQueue, const void * const pvItemToQueue, BaseType_t * const pxHigherPriorityTaskWoken, const BaseType_t xCopyPosition )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+	configASSERT( pxQueue );
+	configASSERT( !( ( pvItemToQueue == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+	configASSERT( !( ( xCopyPosition == queueOVERWRITE ) && ( pxQueue->uxLength != 1 ) ) );
+
+	/* RTOS ports that support interrupt nesting have the concept of a maximum
+	system call (or maximum API call) interrupt priority.  Interrupts that are
+	above the maximum system call priority are kept permanently enabled, even
+	when the RTOS kernel is in a critical section, but cannot make any calls to
+	FreeRTOS API functions.  If configASSERT() is defined in FreeRTOSConfig.h
+	then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+	failure if a FreeRTOS API function is called from an interrupt that has been
+	assigned a priority above the configured maximum system call priority.
+	Only FreeRTOS functions that end in FromISR can be called from interrupts
+	that have been assigned a priority at or (logically) below the maximum
+	system call	interrupt priority.  FreeRTOS maintains a separate interrupt
+	safe API to ensure interrupt entry is as fast and as simple as possible.
+	More information (albeit Cortex-M specific) is provided on the following
+	link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+	portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+	/* Similar to xQueueGenericSend, except without blocking if there is no room
+	in the queue.  Also don't directly wake a task that was blocked on a queue
+	read, instead return a flag to say whether a context switch is required or
+	not (i.e. has a task with a higher priority than us been woken by this
+	post). */
+	uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		if( ( pxQueue->uxMessagesWaiting < pxQueue->uxLength ) || ( xCopyPosition == queueOVERWRITE ) )
+		{
+			const int8_t cTxLock = pxQueue->cTxLock;
+
+			traceQUEUE_SEND_FROM_ISR( pxQueue );
+
+			/* Semaphores use xQueueGiveFromISR(), so pxQueue will not be a
+			semaphore or mutex.  That means prvCopyDataToQueue() cannot result
+			in a task disinheriting a priority and prvCopyDataToQueue() can be
+			called here even though the disinherit function does not check if
+			the scheduler is suspended before accessing the ready lists. */
+			( void ) prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
+
+			/* The event list is not altered if the queue is locked.  This will
+			be done when the queue is unlocked later. */
+			if( cTxLock == queueUNLOCKED )
+			{
+				#if ( configUSE_QUEUE_SETS == 1 )
+				{
+					if( pxQueue->pxQueueSetContainer != NULL )
+					{
+						if( prvNotifyQueueSetContainer( pxQueue, xCopyPosition ) != pdFALSE )
+						{
+							/* The queue is a member of a queue set, and posting
+							to the queue set caused a higher priority task to
+							unblock.  A context switch is required. */
+							if( pxHigherPriorityTaskWoken != NULL )
+							{
+								*pxHigherPriorityTaskWoken = pdTRUE;
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+						{
+							if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+							{
+								/* The task waiting has a higher priority so
+								record that a context switch is required. */
+								if( pxHigherPriorityTaskWoken != NULL )
+								{
+									*pxHigherPriorityTaskWoken = pdTRUE;
+								}
+								else
+								{
+									mtCOVERAGE_TEST_MARKER();
+								}
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+				}
+				#else /* configUSE_QUEUE_SETS */
+				{
+					if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+					{
+						if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+						{
+							/* The task waiting has a higher priority so record that a
+							context	switch is required. */
+							if( pxHigherPriorityTaskWoken != NULL )
+							{
+								*pxHigherPriorityTaskWoken = pdTRUE;
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				#endif /* configUSE_QUEUE_SETS */
+			}
+			else
+			{
+				/* Increment the lock count so the task that unlocks the queue
+				knows that data was posted while it was locked. */
+				pxQueue->cTxLock = ( int8_t ) ( cTxLock + 1 );
+			}
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue );
+			xReturn = errQUEUE_FULL;
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGiveFromISR( QueueHandle_t xQueue, BaseType_t * const pxHigherPriorityTaskWoken )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+	/* Similar to xQueueGenericSendFromISR() but used with semaphores where the
+	item size is 0.  Don't directly wake a task that was blocked on a queue
+	read, instead return a flag to say whether a context switch is required or
+	not (i.e. has a task with a higher priority than us been woken by this
+	post). */
+
+	configASSERT( pxQueue );
+
+	/* xQueueGenericSendFromISR() should be used instead of xQueueGiveFromISR()
+	if the item size is not 0. */
+	configASSERT( pxQueue->uxItemSize == 0 );
+
+	/* Normally a mutex would not be given from an interrupt, especially if
+	there is a mutex holder, as priority inheritance makes no sense for an
+	interrupts, only tasks. */
+	configASSERT( !( ( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX ) && ( pxQueue->pxMutexHolder != NULL ) ) );
+
+	/* RTOS ports that support interrupt nesting have the concept of a maximum
+	system call (or maximum API call) interrupt priority.  Interrupts that are
+	above the maximum system call priority are kept permanently enabled, even
+	when the RTOS kernel is in a critical section, but cannot make any calls to
+	FreeRTOS API functions.  If configASSERT() is defined in FreeRTOSConfig.h
+	then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+	failure if a FreeRTOS API function is called from an interrupt that has been
+	assigned a priority above the configured maximum system call priority.
+	Only FreeRTOS functions that end in FromISR can be called from interrupts
+	that have been assigned a priority at or (logically) below the maximum
+	system call	interrupt priority.  FreeRTOS maintains a separate interrupt
+	safe API to ensure interrupt entry is as fast and as simple as possible.
+	More information (albeit Cortex-M specific) is provided on the following
+	link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+	portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+	uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		const UBaseType_t uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+		/* When the queue is used to implement a semaphore no data is ever
+		moved through the queue but it is still valid to see if the queue 'has
+		space'. */
+		if( uxMessagesWaiting < pxQueue->uxLength )
+		{
+			const int8_t cTxLock = pxQueue->cTxLock;
+
+			traceQUEUE_SEND_FROM_ISR( pxQueue );
+
+			/* A task can only have an inherited priority if it is a mutex
+			holder - and if there is a mutex holder then the mutex cannot be
+			given from an ISR.  As this is the ISR version of the function it
+			can be assumed there is no mutex holder and no need to determine if
+			priority disinheritance is needed.  Simply increase the count of
+			messages (semaphores) available. */
+			pxQueue->uxMessagesWaiting = uxMessagesWaiting + 1;
+
+			/* The event list is not altered if the queue is locked.  This will
+			be done when the queue is unlocked later. */
+			if( cTxLock == queueUNLOCKED )
+			{
+				#if ( configUSE_QUEUE_SETS == 1 )
+				{
+					if( pxQueue->pxQueueSetContainer != NULL )
+					{
+						if( prvNotifyQueueSetContainer( pxQueue, queueSEND_TO_BACK ) != pdFALSE )
+						{
+							/* The semaphore is a member of a queue set, and
+							posting	to the queue set caused a higher priority
+							task to	unblock.  A context switch is required. */
+							if( pxHigherPriorityTaskWoken != NULL )
+							{
+								*pxHigherPriorityTaskWoken = pdTRUE;
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+						{
+							if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+							{
+								/* The task waiting has a higher priority so
+								record that a context switch is required. */
+								if( pxHigherPriorityTaskWoken != NULL )
+								{
+									*pxHigherPriorityTaskWoken = pdTRUE;
+								}
+								else
+								{
+									mtCOVERAGE_TEST_MARKER();
+								}
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+				}
+				#else /* configUSE_QUEUE_SETS */
+				{
+					if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+					{
+						if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+						{
+							/* The task waiting has a higher priority so record that a
+							context	switch is required. */
+							if( pxHigherPriorityTaskWoken != NULL )
+							{
+								*pxHigherPriorityTaskWoken = pdTRUE;
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				#endif /* configUSE_QUEUE_SETS */
+			}
+			else
+			{
+				/* Increment the lock count so the task that unlocks the queue
+				knows that data was posted while it was locked. */
+				pxQueue->cTxLock = ( int8_t ) ( cTxLock + 1 );
+			}
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue );
+			xReturn = errQUEUE_FULL;
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueGenericReceive( QueueHandle_t xQueue, void * const pvBuffer, TickType_t xTicksToWait, const BaseType_t xJustPeeking )
+{
+BaseType_t xEntryTimeSet = pdFALSE;
+TimeOut_t xTimeOut;
+int8_t *pcOriginalReadPosition;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+	configASSERT( pxQueue );
+	configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+	#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
+	{
+		configASSERT( !( ( xTaskGetSchedulerState() == taskSCHEDULER_SUSPENDED ) && ( xTicksToWait != 0 ) ) );
+	}
+	#endif
+
+	/* This function relaxes the coding standard somewhat to allow return
+	statements within the function itself.  This is done in the interest
+	of execution time efficiency. */
+
+	for( ;; )
+	{
+		taskENTER_CRITICAL();
+		{
+			const UBaseType_t uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+			/* Is there data in the queue now?  To be running the calling task
+			must be the highest priority task wanting to access the queue. */
+			if( uxMessagesWaiting > ( UBaseType_t ) 0 )
+			{
+				/* Remember the read position in case the queue is only being
+				peeked. */
+				pcOriginalReadPosition = pxQueue->u.pcReadFrom;
+
+				prvCopyDataFromQueue( pxQueue, pvBuffer );
+
+				if( xJustPeeking == pdFALSE )
+				{
+					traceQUEUE_RECEIVE( pxQueue );
+
+					/* Actually removing data, not just peeking. */
+					pxQueue->uxMessagesWaiting = uxMessagesWaiting - 1;
+
+					#if ( configUSE_MUTEXES == 1 )
+					{
+						if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+						{
+							/* Record the information required to implement
+							priority inheritance should it become necessary. */
+							pxQueue->pxMutexHolder = ( int8_t * ) pvTaskIncrementMutexHeldCount(); /*lint !e961 Cast is not redundant as TaskHandle_t is a typedef. */
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					#endif /* configUSE_MUTEXES */
+
+					if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+					{
+						if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+						{
+							queueYIELD_IF_USING_PREEMPTION();
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					traceQUEUE_PEEK( pxQueue );
+
+					/* The data is not being removed, so reset the read
+					pointer. */
+					pxQueue->u.pcReadFrom = pcOriginalReadPosition;
+
+					/* The data is being left in the queue, so see if there are
+					any other tasks waiting for the data. */
+					if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+					{
+						if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+						{
+							/* The task waiting has a higher priority than this task. */
+							queueYIELD_IF_USING_PREEMPTION();
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+
+				taskEXIT_CRITICAL();
+				return pdPASS;
+			}
+			else
+			{
+				if( xTicksToWait == ( TickType_t ) 0 )
+				{
+					/* The queue was empty and no block time is specified (or
+					the block time has expired) so leave now. */
+					taskEXIT_CRITICAL();
+					traceQUEUE_RECEIVE_FAILED( pxQueue );
+					return errQUEUE_EMPTY;
+				}
+				else if( xEntryTimeSet == pdFALSE )
+				{
+					/* The queue was empty and a block time was specified so
+					configure the timeout structure. */
+					vTaskSetTimeOutState( &xTimeOut );
+					xEntryTimeSet = pdTRUE;
+				}
+				else
+				{
+					/* Entry time was already set. */
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		/* Interrupts and other tasks can send to and receive from the queue
+		now the critical section has been exited. */
+
+		vTaskSuspendAll();
+		prvLockQueue( pxQueue );
+
+		/* Update the timeout state to see if it has expired yet. */
+		if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
+		{
+			if( prvIsQueueEmpty( pxQueue ) != pdFALSE )
+			{
+				traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );
+
+				#if ( configUSE_MUTEXES == 1 )
+				{
+					if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+					{
+						taskENTER_CRITICAL();
+						{
+							vTaskPriorityInherit( ( void * ) pxQueue->pxMutexHolder );
+						}
+						taskEXIT_CRITICAL();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				#endif
+
+				vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );
+				prvUnlockQueue( pxQueue );
+				if( xTaskResumeAll() == pdFALSE )
+				{
+					portYIELD_WITHIN_API();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				/* Try again. */
+				prvUnlockQueue( pxQueue );
+				( void ) xTaskResumeAll();
+			}
+		}
+		else
+		{
+			prvUnlockQueue( pxQueue );
+			( void ) xTaskResumeAll();
+
+			if( prvIsQueueEmpty( pxQueue ) != pdFALSE )
+			{
+				traceQUEUE_RECEIVE_FAILED( pxQueue );
+				return errQUEUE_EMPTY;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueReceiveFromISR( QueueHandle_t xQueue, void * const pvBuffer, BaseType_t * const pxHigherPriorityTaskWoken )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+	configASSERT( pxQueue );
+	configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+
+	/* RTOS ports that support interrupt nesting have the concept of a maximum
+	system call (or maximum API call) interrupt priority.  Interrupts that are
+	above the maximum system call priority are kept permanently enabled, even
+	when the RTOS kernel is in a critical section, but cannot make any calls to
+	FreeRTOS API functions.  If configASSERT() is defined in FreeRTOSConfig.h
+	then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+	failure if a FreeRTOS API function is called from an interrupt that has been
+	assigned a priority above the configured maximum system call priority.
+	Only FreeRTOS functions that end in FromISR can be called from interrupts
+	that have been assigned a priority at or (logically) below the maximum
+	system call	interrupt priority.  FreeRTOS maintains a separate interrupt
+	safe API to ensure interrupt entry is as fast and as simple as possible.
+	More information (albeit Cortex-M specific) is provided on the following
+	link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+	portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+	uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		const UBaseType_t uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+		/* Cannot block in an ISR, so check there is data available. */
+		if( uxMessagesWaiting > ( UBaseType_t ) 0 )
+		{
+			const int8_t cRxLock = pxQueue->cRxLock;
+
+			traceQUEUE_RECEIVE_FROM_ISR( pxQueue );
+
+			prvCopyDataFromQueue( pxQueue, pvBuffer );
+			pxQueue->uxMessagesWaiting = uxMessagesWaiting - 1;
+
+			/* If the queue is locked the event list will not be modified.
+			Instead update the lock count so the task that unlocks the queue
+			will know that an ISR has removed data while the queue was
+			locked. */
+			if( cRxLock == queueUNLOCKED )
+			{
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+				{
+					if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+					{
+						/* The task waiting has a higher priority than us so
+						force a context switch. */
+						if( pxHigherPriorityTaskWoken != NULL )
+						{
+							*pxHigherPriorityTaskWoken = pdTRUE;
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				/* Increment the lock count so the task that unlocks the queue
+				knows that data was removed while it was locked. */
+				pxQueue->cRxLock = ( int8_t ) ( cRxLock + 1 );
+			}
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = pdFAIL;
+			traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue );
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueuePeekFromISR( QueueHandle_t xQueue,  void * const pvBuffer )
+{
+BaseType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+int8_t *pcOriginalReadPosition;
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+	configASSERT( pxQueue );
+	configASSERT( !( ( pvBuffer == NULL ) && ( pxQueue->uxItemSize != ( UBaseType_t ) 0U ) ) );
+	configASSERT( pxQueue->uxItemSize != 0 ); /* Can't peek a semaphore. */
+
+	/* RTOS ports that support interrupt nesting have the concept of a maximum
+	system call (or maximum API call) interrupt priority.  Interrupts that are
+	above the maximum system call priority are kept permanently enabled, even
+	when the RTOS kernel is in a critical section, but cannot make any calls to
+	FreeRTOS API functions.  If configASSERT() is defined in FreeRTOSConfig.h
+	then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+	failure if a FreeRTOS API function is called from an interrupt that has been
+	assigned a priority above the configured maximum system call priority.
+	Only FreeRTOS functions that end in FromISR can be called from interrupts
+	that have been assigned a priority at or (logically) below the maximum
+	system call	interrupt priority.  FreeRTOS maintains a separate interrupt
+	safe API to ensure interrupt entry is as fast and as simple as possible.
+	More information (albeit Cortex-M specific) is provided on the following
+	link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+	portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+	uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+	{
+		/* Cannot block in an ISR, so check there is data available. */
+		if( pxQueue->uxMessagesWaiting > ( UBaseType_t ) 0 )
+		{
+			traceQUEUE_PEEK_FROM_ISR( pxQueue );
+
+			/* Remember the read position so it can be reset as nothing is
+			actually being removed from the queue. */
+			pcOriginalReadPosition = pxQueue->u.pcReadFrom;
+			prvCopyDataFromQueue( pxQueue, pvBuffer );
+			pxQueue->u.pcReadFrom = pcOriginalReadPosition;
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = pdFAIL;
+			traceQUEUE_PEEK_FROM_ISR_FAILED( pxQueue );
+		}
+	}
+	portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxQueueMessagesWaiting( const QueueHandle_t xQueue )
+{
+UBaseType_t uxReturn;
+
+	configASSERT( xQueue );
+
+	taskENTER_CRITICAL();
+	{
+		uxReturn = ( ( Queue_t * ) xQueue )->uxMessagesWaiting;
+	}
+	taskEXIT_CRITICAL();
+
+	return uxReturn;
+} /*lint !e818 Pointer cannot be declared const as xQueue is a typedef not pointer. */
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxQueueSpacesAvailable( const QueueHandle_t xQueue )
+{
+UBaseType_t uxReturn;
+Queue_t *pxQueue;
+
+	pxQueue = ( Queue_t * ) xQueue;
+	configASSERT( pxQueue );
+
+	taskENTER_CRITICAL();
+	{
+		uxReturn = pxQueue->uxLength - pxQueue->uxMessagesWaiting;
+	}
+	taskEXIT_CRITICAL();
+
+	return uxReturn;
+} /*lint !e818 Pointer cannot be declared const as xQueue is a typedef not pointer. */
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxQueueMessagesWaitingFromISR( const QueueHandle_t xQueue )
+{
+UBaseType_t uxReturn;
+
+	configASSERT( xQueue );
+
+	uxReturn = ( ( Queue_t * ) xQueue )->uxMessagesWaiting;
+
+	return uxReturn;
+} /*lint !e818 Pointer cannot be declared const as xQueue is a typedef not pointer. */
+/*-----------------------------------------------------------*/
+
+void vQueueDelete( QueueHandle_t xQueue )
+{
+Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+	configASSERT( pxQueue );
+	traceQUEUE_DELETE( pxQueue );
+
+	#if ( configQUEUE_REGISTRY_SIZE > 0 )
+	{
+		vQueueUnregisterQueue( pxQueue );
+	}
+	#endif
+
+	#if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) )
+	{
+		/* The queue can only have been allocated dynamically - free it
+		again. */
+		vPortFree( pxQueue );
+	}
+	#elif( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+	{
+		/* The queue could have been allocated statically or dynamically, so
+		check before attempting to free the memory. */
+		if( pxQueue->ucStaticallyAllocated == ( uint8_t ) pdFALSE )
+		{
+			vPortFree( pxQueue );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	#else
+	{
+		/* The queue must have been statically allocated, so is not going to be
+		deleted.  Avoid compiler warnings about the unused parameter. */
+		( void ) pxQueue;
+	}
+	#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	UBaseType_t uxQueueGetQueueNumber( QueueHandle_t xQueue )
+	{
+		return ( ( Queue_t * ) xQueue )->uxQueueNumber;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	void vQueueSetQueueNumber( QueueHandle_t xQueue, UBaseType_t uxQueueNumber )
+	{
+		( ( Queue_t * ) xQueue )->uxQueueNumber = uxQueueNumber;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	uint8_t ucQueueGetQueueType( QueueHandle_t xQueue )
+	{
+		return ( ( Queue_t * ) xQueue )->ucQueueType;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvCopyDataToQueue( Queue_t * const pxQueue, const void *pvItemToQueue, const BaseType_t xPosition )
+{
+BaseType_t xReturn = pdFALSE;
+UBaseType_t uxMessagesWaiting;
+
+	/* This function is called from a critical section. */
+
+	uxMessagesWaiting = pxQueue->uxMessagesWaiting;
+
+	if( pxQueue->uxItemSize == ( UBaseType_t ) 0 )
+	{
+		#if ( configUSE_MUTEXES == 1 )
+		{
+			if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
+			{
+				/* The mutex is no longer being held. */
+				xReturn = xTaskPriorityDisinherit( ( void * ) pxQueue->pxMutexHolder );
+				pxQueue->pxMutexHolder = NULL;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* configUSE_MUTEXES */
+	}
+	else if( xPosition == queueSEND_TO_BACK )
+	{
+		( void ) memcpy( ( void * ) pxQueue->pcWriteTo, pvItemToQueue, ( size_t ) pxQueue->uxItemSize ); /*lint !e961 !e418 MISRA exception as the casts are only redundant for some ports, plus previous logic ensures a null pointer can only be passed to memcpy() if the copy size is 0. */
+		pxQueue->pcWriteTo += pxQueue->uxItemSize;
+		if( pxQueue->pcWriteTo >= pxQueue->pcTail ) /*lint !e946 MISRA exception justified as comparison of pointers is the cleanest solution. */
+		{
+			pxQueue->pcWriteTo = pxQueue->pcHead;
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		( void ) memcpy( ( void * ) pxQueue->u.pcReadFrom, pvItemToQueue, ( size_t ) pxQueue->uxItemSize ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+		pxQueue->u.pcReadFrom -= pxQueue->uxItemSize;
+		if( pxQueue->u.pcReadFrom < pxQueue->pcHead ) /*lint !e946 MISRA exception justified as comparison of pointers is the cleanest solution. */
+		{
+			pxQueue->u.pcReadFrom = ( pxQueue->pcTail - pxQueue->uxItemSize );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		if( xPosition == queueOVERWRITE )
+		{
+			if( uxMessagesWaiting > ( UBaseType_t ) 0 )
+			{
+				/* An item is not being added but overwritten, so subtract
+				one from the recorded number of items in the queue so when
+				one is added again below the number of recorded items remains
+				correct. */
+				--uxMessagesWaiting;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+	pxQueue->uxMessagesWaiting = uxMessagesWaiting + 1;
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+static void prvCopyDataFromQueue( Queue_t * const pxQueue, void * const pvBuffer )
+{
+	if( pxQueue->uxItemSize != ( UBaseType_t ) 0 )
+	{
+		pxQueue->u.pcReadFrom += pxQueue->uxItemSize;
+		if( pxQueue->u.pcReadFrom >= pxQueue->pcTail ) /*lint !e946 MISRA exception justified as use of the relational operator is the cleanest solutions. */
+		{
+			pxQueue->u.pcReadFrom = pxQueue->pcHead;
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+		( void ) memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->u.pcReadFrom, ( size_t ) pxQueue->uxItemSize ); /*lint !e961 !e418 MISRA exception as the casts are only redundant for some ports.  Also previous logic ensures a null pointer can only be passed to memcpy() when the count is 0. */
+	}
+}
+/*-----------------------------------------------------------*/
+
+static void prvUnlockQueue( Queue_t * const pxQueue )
+{
+	/* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED. */
+
+	/* The lock counts contains the number of extra data items placed or
+	removed from the queue while the queue was locked.  When a queue is
+	locked items can be added or removed, but the event lists cannot be
+	updated. */
+	taskENTER_CRITICAL();
+	{
+		int8_t cTxLock = pxQueue->cTxLock;
+
+		/* See if data was added to the queue while it was locked. */
+		while( cTxLock > queueLOCKED_UNMODIFIED )
+		{
+			/* Data was posted while the queue was locked.  Are any tasks
+			blocked waiting for data to become available? */
+			#if ( configUSE_QUEUE_SETS == 1 )
+			{
+				if( pxQueue->pxQueueSetContainer != NULL )
+				{
+					if( prvNotifyQueueSetContainer( pxQueue, queueSEND_TO_BACK ) != pdFALSE )
+					{
+						/* The queue is a member of a queue set, and posting to
+						the queue set caused a higher priority task to unblock.
+						A context switch is required. */
+						vTaskMissedYield();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					/* Tasks that are removed from the event list will get
+					added to the pending ready list as the scheduler is still
+					suspended. */
+					if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+					{
+						if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+						{
+							/* The task waiting has a higher priority so record that a
+							context	switch is required. */
+							vTaskMissedYield();
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						break;
+					}
+				}
+			}
+			#else /* configUSE_QUEUE_SETS */
+			{
+				/* Tasks that are removed from the event list will get added to
+				the pending ready list as the scheduler is still suspended. */
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+				{
+					if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+					{
+						/* The task waiting has a higher priority so record that
+						a context switch is required. */
+						vTaskMissedYield();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					break;
+				}
+			}
+			#endif /* configUSE_QUEUE_SETS */
+
+			--cTxLock;
+		}
+
+		pxQueue->cTxLock = queueUNLOCKED;
+	}
+	taskEXIT_CRITICAL();
+
+	/* Do the same for the Rx lock. */
+	taskENTER_CRITICAL();
+	{
+		int8_t cRxLock = pxQueue->cRxLock;
+
+		while( cRxLock > queueLOCKED_UNMODIFIED )
+		{
+			if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+			{
+				if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+				{
+					vTaskMissedYield();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				--cRxLock;
+			}
+			else
+			{
+				break;
+			}
+		}
+
+		pxQueue->cRxLock = queueUNLOCKED;
+	}
+	taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvIsQueueEmpty( const Queue_t *pxQueue )
+{
+BaseType_t xReturn;
+
+	taskENTER_CRITICAL();
+	{
+		if( pxQueue->uxMessagesWaiting == ( UBaseType_t )  0 )
+		{
+			xReturn = pdTRUE;
+		}
+		else
+		{
+			xReturn = pdFALSE;
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueIsQueueEmptyFromISR( const QueueHandle_t xQueue )
+{
+BaseType_t xReturn;
+
+	configASSERT( xQueue );
+	if( ( ( Queue_t * ) xQueue )->uxMessagesWaiting == ( UBaseType_t ) 0 )
+	{
+		xReturn = pdTRUE;
+	}
+	else
+	{
+		xReturn = pdFALSE;
+	}
+
+	return xReturn;
+} /*lint !e818 xQueue could not be pointer to const because it is a typedef. */
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvIsQueueFull( const Queue_t *pxQueue )
+{
+BaseType_t xReturn;
+
+	taskENTER_CRITICAL();
+	{
+		if( pxQueue->uxMessagesWaiting == pxQueue->uxLength )
+		{
+			xReturn = pdTRUE;
+		}
+		else
+		{
+			xReturn = pdFALSE;
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xQueueIsQueueFullFromISR( const QueueHandle_t xQueue )
+{
+BaseType_t xReturn;
+
+	configASSERT( xQueue );
+	if( ( ( Queue_t * ) xQueue )->uxMessagesWaiting == ( ( Queue_t * ) xQueue )->uxLength )
+	{
+		xReturn = pdTRUE;
+	}
+	else
+	{
+		xReturn = pdFALSE;
+	}
+
+	return xReturn;
+} /*lint !e818 xQueue could not be pointer to const because it is a typedef. */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+	BaseType_t xQueueCRSend( QueueHandle_t xQueue, const void *pvItemToQueue, TickType_t xTicksToWait )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+		/* If the queue is already full we may have to block.  A critical section
+		is required to prevent an interrupt removing something from the queue
+		between the check to see if the queue is full and blocking on the queue. */
+		portDISABLE_INTERRUPTS();
+		{
+			if( prvIsQueueFull( pxQueue ) != pdFALSE )
+			{
+				/* The queue is full - do we want to block or just leave without
+				posting? */
+				if( xTicksToWait > ( TickType_t ) 0 )
+				{
+					/* As this is called from a coroutine we cannot block directly, but
+					return indicating that we need to block. */
+					vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToSend ) );
+					portENABLE_INTERRUPTS();
+					return errQUEUE_BLOCKED;
+				}
+				else
+				{
+					portENABLE_INTERRUPTS();
+					return errQUEUE_FULL;
+				}
+			}
+		}
+		portENABLE_INTERRUPTS();
+
+		portDISABLE_INTERRUPTS();
+		{
+			if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
+			{
+				/* There is room in the queue, copy the data into the queue. */
+				prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );
+				xReturn = pdPASS;
+
+				/* Were any co-routines waiting for data to become available? */
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+				{
+					/* In this instance the co-routine could be placed directly
+					into the ready list as we are within a critical section.
+					Instead the same pending ready list mechanism is used as if
+					the event were caused from within an interrupt. */
+					if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+					{
+						/* The co-routine waiting has a higher priority so record
+						that a yield might be appropriate. */
+						xReturn = errQUEUE_YIELD;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				xReturn = errQUEUE_FULL;
+			}
+		}
+		portENABLE_INTERRUPTS();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+	BaseType_t xQueueCRReceive( QueueHandle_t xQueue, void *pvBuffer, TickType_t xTicksToWait )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+		/* If the queue is already empty we may have to block.  A critical section
+		is required to prevent an interrupt adding something to the queue
+		between the check to see if the queue is empty and blocking on the queue. */
+		portDISABLE_INTERRUPTS();
+		{
+			if( pxQueue->uxMessagesWaiting == ( UBaseType_t ) 0 )
+			{
+				/* There are no messages in the queue, do we want to block or just
+				leave with nothing? */
+				if( xTicksToWait > ( TickType_t ) 0 )
+				{
+					/* As this is a co-routine we cannot block directly, but return
+					indicating that we need to block. */
+					vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToReceive ) );
+					portENABLE_INTERRUPTS();
+					return errQUEUE_BLOCKED;
+				}
+				else
+				{
+					portENABLE_INTERRUPTS();
+					return errQUEUE_FULL;
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		portENABLE_INTERRUPTS();
+
+		portDISABLE_INTERRUPTS();
+		{
+			if( pxQueue->uxMessagesWaiting > ( UBaseType_t ) 0 )
+			{
+				/* Data is available from the queue. */
+				pxQueue->u.pcReadFrom += pxQueue->uxItemSize;
+				if( pxQueue->u.pcReadFrom >= pxQueue->pcTail )
+				{
+					pxQueue->u.pcReadFrom = pxQueue->pcHead;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+				--( pxQueue->uxMessagesWaiting );
+				( void ) memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->u.pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
+
+				xReturn = pdPASS;
+
+				/* Were any co-routines waiting for space to become available? */
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+				{
+					/* In this instance the co-routine could be placed directly
+					into the ready list as we are within a critical section.
+					Instead the same pending ready list mechanism is used as if
+					the event were caused from within an interrupt. */
+					if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+					{
+						xReturn = errQUEUE_YIELD;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				xReturn = pdFAIL;
+			}
+		}
+		portENABLE_INTERRUPTS();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+	BaseType_t xQueueCRSendFromISR( QueueHandle_t xQueue, const void *pvItemToQueue, BaseType_t xCoRoutinePreviouslyWoken )
+	{
+	Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+		/* Cannot block within an ISR so if there is no space on the queue then
+		exit without doing anything. */
+		if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
+		{
+			prvCopyDataToQueue( pxQueue, pvItemToQueue, queueSEND_TO_BACK );
+
+			/* We only want to wake one co-routine per ISR, so check that a
+			co-routine has not already been woken. */
+			if( xCoRoutinePreviouslyWoken == pdFALSE )
+			{
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
+				{
+					if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
+					{
+						return pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return xCoRoutinePreviouslyWoken;
+	}
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_CO_ROUTINES == 1 )
+
+	BaseType_t xQueueCRReceiveFromISR( QueueHandle_t xQueue, void *pvBuffer, BaseType_t *pxCoRoutineWoken )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+		/* We cannot block from an ISR, so check there is data available. If
+		not then just leave without doing anything. */
+		if( pxQueue->uxMessagesWaiting > ( UBaseType_t ) 0 )
+		{
+			/* Copy the data from the queue. */
+			pxQueue->u.pcReadFrom += pxQueue->uxItemSize;
+			if( pxQueue->u.pcReadFrom >= pxQueue->pcTail )
+			{
+				pxQueue->u.pcReadFrom = pxQueue->pcHead;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+			--( pxQueue->uxMessagesWaiting );
+			( void ) memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->u.pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
+
+			if( ( *pxCoRoutineWoken ) == pdFALSE )
+			{
+				if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
+				{
+					if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
+					{
+						*pxCoRoutineWoken = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = pdFAIL;
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_CO_ROUTINES */
+/*-----------------------------------------------------------*/
+
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+	void vQueueAddToRegistry( QueueHandle_t xQueue, const char *pcQueueName ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	{
+	UBaseType_t ux;
+
+		/* See if there is an empty space in the registry.  A NULL name denotes
+		a free slot. */
+		for( ux = ( UBaseType_t ) 0U; ux < ( UBaseType_t ) configQUEUE_REGISTRY_SIZE; ux++ )
+		{
+			if( xQueueRegistry[ ux ].pcQueueName == NULL )
+			{
+				/* Store the information on this queue. */
+				xQueueRegistry[ ux ].pcQueueName = pcQueueName;
+				xQueueRegistry[ ux ].xHandle = xQueue;
+
+				traceQUEUE_REGISTRY_ADD( xQueue, pcQueueName );
+				break;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+	}
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+/*-----------------------------------------------------------*/
+
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+	const char *pcQueueGetName( QueueHandle_t xQueue ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	{
+	UBaseType_t ux;
+	const char *pcReturn = NULL; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+		/* Note there is nothing here to protect against another task adding or
+		removing entries from the registry while it is being searched. */
+		for( ux = ( UBaseType_t ) 0U; ux < ( UBaseType_t ) configQUEUE_REGISTRY_SIZE; ux++ )
+		{
+			if( xQueueRegistry[ ux ].xHandle == xQueue )
+			{
+				pcReturn = xQueueRegistry[ ux ].pcQueueName;
+				break;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+
+		return pcReturn;
+	}
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+/*-----------------------------------------------------------*/
+
+#if ( configQUEUE_REGISTRY_SIZE > 0 )
+
+	void vQueueUnregisterQueue( QueueHandle_t xQueue )
+	{
+	UBaseType_t ux;
+
+		/* See if the handle of the queue being unregistered in actually in the
+		registry. */
+		for( ux = ( UBaseType_t ) 0U; ux < ( UBaseType_t ) configQUEUE_REGISTRY_SIZE; ux++ )
+		{
+			if( xQueueRegistry[ ux ].xHandle == xQueue )
+			{
+				/* Set the name to NULL to show that this slot if free again. */
+				xQueueRegistry[ ux ].pcQueueName = NULL;
+
+				/* Set the handle to NULL to ensure the same queue handle cannot
+				appear in the registry twice if it is added, removed, then
+				added again. */
+				xQueueRegistry[ ux ].xHandle = ( QueueHandle_t ) 0;
+				break;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+
+	} /*lint !e818 xQueue could not be pointer to const because it is a typedef. */
+
+#endif /* configQUEUE_REGISTRY_SIZE */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TIMERS == 1 )
+
+	void vQueueWaitForMessageRestricted( QueueHandle_t xQueue, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely )
+	{
+	Queue_t * const pxQueue = ( Queue_t * ) xQueue;
+
+		/* This function should not be called by application code hence the
+		'Restricted' in its name.  It is not part of the public API.  It is
+		designed for use by kernel code, and has special calling requirements.
+		It can result in vListInsert() being called on a list that can only
+		possibly ever have one item in it, so the list will be fast, but even
+		so it should be called with the scheduler locked and not from a critical
+		section. */
+
+		/* Only do anything if there are no messages in the queue.  This function
+		will not actually cause the task to block, just place it on a blocked
+		list.  It will not block until the scheduler is unlocked - at which
+		time a yield will be performed.  If an item is added to the queue while
+		the queue is locked, and the calling task blocks on the queue, then the
+		calling task will be immediately unblocked when the queue is unlocked. */
+		prvLockQueue( pxQueue );
+		if( pxQueue->uxMessagesWaiting == ( UBaseType_t ) 0U )
+		{
+			/* There is nothing in the queue, block for the specified period. */
+			vTaskPlaceOnEventListRestricted( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait, xWaitIndefinitely );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+		prvUnlockQueue( pxQueue );
+	}
+
+#endif /* configUSE_TIMERS */
+/*-----------------------------------------------------------*/
+
+#if( ( configUSE_QUEUE_SETS == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+
+	QueueSetHandle_t xQueueCreateSet( const UBaseType_t uxEventQueueLength )
+	{
+	QueueSetHandle_t pxQueue;
+
+		pxQueue = xQueueGenericCreate( uxEventQueueLength, sizeof( Queue_t * ), queueQUEUE_TYPE_SET );
+
+		return pxQueue;
+	}
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+	BaseType_t xQueueAddToSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet )
+	{
+	BaseType_t xReturn;
+
+		taskENTER_CRITICAL();
+		{
+			if( ( ( Queue_t * ) xQueueOrSemaphore )->pxQueueSetContainer != NULL )
+			{
+				/* Cannot add a queue/semaphore to more than one queue set. */
+				xReturn = pdFAIL;
+			}
+			else if( ( ( Queue_t * ) xQueueOrSemaphore )->uxMessagesWaiting != ( UBaseType_t ) 0 )
+			{
+				/* Cannot add a queue/semaphore to a queue set if there are already
+				items in the queue/semaphore. */
+				xReturn = pdFAIL;
+			}
+			else
+			{
+				( ( Queue_t * ) xQueueOrSemaphore )->pxQueueSetContainer = xQueueSet;
+				xReturn = pdPASS;
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+	BaseType_t xQueueRemoveFromSet( QueueSetMemberHandle_t xQueueOrSemaphore, QueueSetHandle_t xQueueSet )
+	{
+	BaseType_t xReturn;
+	Queue_t * const pxQueueOrSemaphore = ( Queue_t * ) xQueueOrSemaphore;
+
+		if( pxQueueOrSemaphore->pxQueueSetContainer != xQueueSet )
+		{
+			/* The queue was not a member of the set. */
+			xReturn = pdFAIL;
+		}
+		else if( pxQueueOrSemaphore->uxMessagesWaiting != ( UBaseType_t ) 0 )
+		{
+			/* It is dangerous to remove a queue from a set when the queue is
+			not empty because the queue set will still hold pending events for
+			the queue. */
+			xReturn = pdFAIL;
+		}
+		else
+		{
+			taskENTER_CRITICAL();
+			{
+				/* The queue is no longer contained in the set. */
+				pxQueueOrSemaphore->pxQueueSetContainer = NULL;
+			}
+			taskEXIT_CRITICAL();
+			xReturn = pdPASS;
+		}
+
+		return xReturn;
+	} /*lint !e818 xQueueSet could not be declared as pointing to const as it is a typedef. */
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+	QueueSetMemberHandle_t xQueueSelectFromSet( QueueSetHandle_t xQueueSet, TickType_t const xTicksToWait )
+	{
+	QueueSetMemberHandle_t xReturn = NULL;
+
+		( void ) xQueueGenericReceive( ( QueueHandle_t ) xQueueSet, &xReturn, xTicksToWait, pdFALSE ); /*lint !e961 Casting from one typedef to another is not redundant. */
+		return xReturn;
+	}
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+	QueueSetMemberHandle_t xQueueSelectFromSetFromISR( QueueSetHandle_t xQueueSet )
+	{
+	QueueSetMemberHandle_t xReturn = NULL;
+
+		( void ) xQueueReceiveFromISR( ( QueueHandle_t ) xQueueSet, &xReturn, NULL ); /*lint !e961 Casting from one typedef to another is not redundant. */
+		return xReturn;
+	}
+
+#endif /* configUSE_QUEUE_SETS */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_QUEUE_SETS == 1 )
+
+	static BaseType_t prvNotifyQueueSetContainer( const Queue_t * const pxQueue, const BaseType_t xCopyPosition )
+	{
+	Queue_t *pxQueueSetContainer = pxQueue->pxQueueSetContainer;
+	BaseType_t xReturn = pdFALSE;
+
+		/* This function must be called form a critical section. */
+
+		configASSERT( pxQueueSetContainer );
+		configASSERT( pxQueueSetContainer->uxMessagesWaiting < pxQueueSetContainer->uxLength );
+
+		if( pxQueueSetContainer->uxMessagesWaiting < pxQueueSetContainer->uxLength )
+		{
+			const int8_t cTxLock = pxQueueSetContainer->cTxLock;
+
+			traceQUEUE_SEND( pxQueueSetContainer );
+
+			/* The data copied is the handle of the queue that contains data. */
+			xReturn = prvCopyDataToQueue( pxQueueSetContainer, &pxQueue, xCopyPosition );
+
+			if( cTxLock == queueUNLOCKED )
+			{
+				if( listLIST_IS_EMPTY( &( pxQueueSetContainer->xTasksWaitingToReceive ) ) == pdFALSE )
+				{
+					if( xTaskRemoveFromEventList( &( pxQueueSetContainer->xTasksWaitingToReceive ) ) != pdFALSE )
+					{
+						/* The task waiting has a higher priority. */
+						xReturn = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				pxQueueSetContainer->cTxLock = ( int8_t ) ( cTxLock + 1 );
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_QUEUE_SETS */
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/Program/XLLC/FreeRTOS/readme.txt b/Program/XLLC/FreeRTOS/readme.txt
new file mode 100644
index 0000000000000000000000000000000000000000..81518ecb4339e35363d844853fde09116e314cea
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/readme.txt
@@ -0,0 +1,17 @@
+Each real time kernel port consists of three files that contain the core kernel
+components and are common to every port, and one or more files that are 
+specific to a particular microcontroller and or compiler.
+
++ The FreeRTOS/Source directory contains the three files that are common to 
+every port - list.c, queue.c and tasks.c.  The kernel is contained within these 
+three files.  croutine.c implements the optional co-routine functionality - which
+is normally only used on very memory limited systems.
+
++ The FreeRTOS/Source/Portable directory contains the files that are specific to 
+a particular microcontroller and or compiler.
+
++ The FreeRTOS/Source/include directory contains the real time kernel header 
+files.
+
+See the readme file in the FreeRTOS/Source/Portable directory for more 
+information.
\ No newline at end of file
diff --git a/Program/XLLC/FreeRTOS/tasks.c b/Program/XLLC/FreeRTOS/tasks.c
new file mode 100644
index 0000000000000000000000000000000000000000..8aea1cd9155284522fbdf8c3100fcd02093a0c3b
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/tasks.c
@@ -0,0 +1,4807 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+/* Standard includes. */
+#include 
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+/* FreeRTOS includes. */
+#include "FreeRTOS.h"
+#include "task.h"
+#include "timers.h"
+#include "StackMacros.h"
+
+/* Lint e961 and e750 are suppressed as a MISRA exception justified because the
+MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined for the
+header files above, but not in this file, in order to generate the correct
+privileged Vs unprivileged linkage and placement. */
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750. */
+
+/* Set configUSE_STATS_FORMATTING_FUNCTIONS to 2 to include the stats formatting
+functions but without including stdio.h here. */
+#if ( configUSE_STATS_FORMATTING_FUNCTIONS == 1 )
+	/* At the bottom of this file are two optional functions that can be used
+	to generate human readable text from the raw data generated by the
+	uxTaskGetSystemState() function.  Note the formatting functions are provided
+	for convenience only, and are NOT considered part of the kernel. */
+	#include 
+#endif /* configUSE_STATS_FORMATTING_FUNCTIONS == 1 ) */
+
+#if( configUSE_PREEMPTION == 0 )
+	/* If the cooperative scheduler is being used then a yield should not be
+	performed just because a higher priority task has been woken. */
+	#define taskYIELD_IF_USING_PREEMPTION()
+#else
+	#define taskYIELD_IF_USING_PREEMPTION() portYIELD_WITHIN_API()
+#endif
+
+/* Values that can be assigned to the ucNotifyState member of the TCB. */
+#define taskNOT_WAITING_NOTIFICATION	( ( uint8_t ) 0 )
+#define taskWAITING_NOTIFICATION		( ( uint8_t ) 1 )
+#define taskNOTIFICATION_RECEIVED		( ( uint8_t ) 2 )
+
+/*
+ * The value used to fill the stack of a task when the task is created.  This
+ * is used purely for checking the high water mark for tasks.
+ */
+#define tskSTACK_FILL_BYTE	( 0xa5U )
+
+/* Sometimes the FreeRTOSConfig.h settings only allow a task to be created using
+dynamically allocated RAM, in which case when any task is deleted it is known
+that both the task's stack and TCB need to be freed.  Sometimes the
+FreeRTOSConfig.h settings only allow a task to be created using statically
+allocated RAM, in which case when any task is deleted it is known that neither
+the task's stack or TCB should be freed.  Sometimes the FreeRTOSConfig.h
+settings allow a task to be created using either statically or dynamically
+allocated RAM, in which case a member of the TCB is used to record whether the
+stack and/or TCB were allocated statically or dynamically, so when a task is
+deleted the RAM that was allocated dynamically is freed again and no attempt is
+made to free the RAM that was allocated statically.
+tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE is only true if it is possible for a
+task to be created using either statically or dynamically allocated RAM.  Note
+that if portUSING_MPU_WRAPPERS is 1 then a protected task can be created with
+a statically allocated stack and a dynamically allocated TCB. */
+#define tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE ( ( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) ) || ( portUSING_MPU_WRAPPERS == 1 ) )
+#define tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB 		( ( uint8_t ) 0 )
+#define tskSTATICALLY_ALLOCATED_STACK_ONLY 			( ( uint8_t ) 1 )
+#define tskSTATICALLY_ALLOCATED_STACK_AND_TCB		( ( uint8_t ) 2 )
+
+/*
+ * Macros used by vListTask to indicate which state a task is in.
+ */
+#define tskBLOCKED_CHAR		( 'B' )
+#define tskREADY_CHAR		( 'R' )
+#define tskDELETED_CHAR		( 'D' )
+#define tskSUSPENDED_CHAR	( 'S' )
+
+/*
+ * Some kernel aware debuggers require the data the debugger needs access to be
+ * global, rather than file scope.
+ */
+#ifdef portREMOVE_STATIC_QUALIFIER
+	#define static
+#endif
+
+#if ( configUSE_PORT_OPTIMISED_TASK_SELECTION == 0 )
+
+	/* If configUSE_PORT_OPTIMISED_TASK_SELECTION is 0 then task selection is
+	performed in a generic way that is not optimised to any particular
+	microcontroller architecture. */
+
+	/* uxTopReadyPriority holds the priority of the highest priority ready
+	state task. */
+	#define taskRECORD_READY_PRIORITY( uxPriority )														\
+	{																									\
+		if( ( uxPriority ) > uxTopReadyPriority )														\
+		{																								\
+			uxTopReadyPriority = ( uxPriority );														\
+		}																								\
+	} /* taskRECORD_READY_PRIORITY */
+
+	/*-----------------------------------------------------------*/
+
+	#define taskSELECT_HIGHEST_PRIORITY_TASK()															\
+	{																									\
+	UBaseType_t uxTopPriority = uxTopReadyPriority;														\
+																										\
+		/* Find the highest priority queue that contains ready tasks. */								\
+		while( listLIST_IS_EMPTY( &( pxReadyTasksLists[ uxTopPriority ] ) ) )							\
+		{																								\
+			configASSERT( uxTopPriority );																\
+			--uxTopPriority;																			\
+		}																								\
+																										\
+		/* listGET_OWNER_OF_NEXT_ENTRY indexes through the list, so the tasks of						\
+		the	same priority get an equal share of the processor time. */									\
+		listGET_OWNER_OF_NEXT_ENTRY( pxCurrentTCB, &( pxReadyTasksLists[ uxTopPriority ] ) );			\
+		uxTopReadyPriority = uxTopPriority;																\
+	} /* taskSELECT_HIGHEST_PRIORITY_TASK */
+
+	/*-----------------------------------------------------------*/
+
+	/* Define away taskRESET_READY_PRIORITY() and portRESET_READY_PRIORITY() as
+	they are only required when a port optimised method of task selection is
+	being used. */
+	#define taskRESET_READY_PRIORITY( uxPriority )
+	#define portRESET_READY_PRIORITY( uxPriority, uxTopReadyPriority )
+
+#else /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
+
+	/* If configUSE_PORT_OPTIMISED_TASK_SELECTION is 1 then task selection is
+	performed in a way that is tailored to the particular microcontroller
+	architecture being used. */
+
+	/* A port optimised version is provided.  Call the port defined macros. */
+	#define taskRECORD_READY_PRIORITY( uxPriority )	portRECORD_READY_PRIORITY( uxPriority, uxTopReadyPriority )
+
+	/*-----------------------------------------------------------*/
+
+	#define taskSELECT_HIGHEST_PRIORITY_TASK()														\
+	{																								\
+	UBaseType_t uxTopPriority;																		\
+																									\
+		/* Find the highest priority list that contains ready tasks. */								\
+		portGET_HIGHEST_PRIORITY( uxTopPriority, uxTopReadyPriority );								\
+		configASSERT( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ uxTopPriority ] ) ) > 0 );		\
+		listGET_OWNER_OF_NEXT_ENTRY( pxCurrentTCB, &( pxReadyTasksLists[ uxTopPriority ] ) );		\
+	} /* taskSELECT_HIGHEST_PRIORITY_TASK() */
+
+	/*-----------------------------------------------------------*/
+
+	/* A port optimised version is provided, call it only if the TCB being reset
+	is being referenced from a ready list.  If it is referenced from a delayed
+	or suspended list then it won't be in a ready list. */
+	#define taskRESET_READY_PRIORITY( uxPriority )														\
+	{																									\
+		if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ ( uxPriority ) ] ) ) == ( UBaseType_t ) 0 )	\
+		{																								\
+			portRESET_READY_PRIORITY( ( uxPriority ), ( uxTopReadyPriority ) );							\
+		}																								\
+	}
+
+#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */
+
+/*-----------------------------------------------------------*/
+
+/* pxDelayedTaskList and pxOverflowDelayedTaskList are switched when the tick
+count overflows. */
+#define taskSWITCH_DELAYED_LISTS()																	\
+{																									\
+	List_t *pxTemp;																					\
+																									\
+	/* The delayed tasks list should be empty when the lists are switched. */						\
+	configASSERT( ( listLIST_IS_EMPTY( pxDelayedTaskList ) ) );										\
+																									\
+	pxTemp = pxDelayedTaskList;																		\
+	pxDelayedTaskList = pxOverflowDelayedTaskList;													\
+	pxOverflowDelayedTaskList = pxTemp;																\
+	xNumOfOverflows++;																				\
+	prvResetNextTaskUnblockTime();																	\
+}
+
+/*-----------------------------------------------------------*/
+
+/*
+ * Place the task represented by pxTCB into the appropriate ready list for
+ * the task.  It is inserted at the end of the list.
+ */
+#define prvAddTaskToReadyList( pxTCB )																\
+	traceMOVED_TASK_TO_READY_STATE( pxTCB );														\
+	taskRECORD_READY_PRIORITY( ( pxTCB )->uxPriority );												\
+	vListInsertEnd( &( pxReadyTasksLists[ ( pxTCB )->uxPriority ] ), &( ( pxTCB )->xStateListItem ) ); \
+	tracePOST_MOVED_TASK_TO_READY_STATE( pxTCB )
+/*-----------------------------------------------------------*/
+
+/*
+ * Several functions take an TaskHandle_t parameter that can optionally be NULL,
+ * where NULL is used to indicate that the handle of the currently executing
+ * task should be used in place of the parameter.  This macro simply checks to
+ * see if the parameter is NULL and returns a pointer to the appropriate TCB.
+ */
+#define prvGetTCBFromHandle( pxHandle ) ( ( ( pxHandle ) == NULL ) ? ( TCB_t * ) pxCurrentTCB : ( TCB_t * ) ( pxHandle ) )
+
+/* The item value of the event list item is normally used to hold the priority
+of the task to which it belongs (coded to allow it to be held in reverse
+priority order).  However, it is occasionally borrowed for other purposes.  It
+is important its value is not updated due to a task priority change while it is
+being used for another purpose.  The following bit definition is used to inform
+the scheduler that the value should not be changed - in which case it is the
+responsibility of whichever module is using the value to ensure it gets set back
+to its original value when it is released. */
+#if( configUSE_16_BIT_TICKS == 1 )
+	#define taskEVENT_LIST_ITEM_VALUE_IN_USE	0x8000U
+#else
+	#define taskEVENT_LIST_ITEM_VALUE_IN_USE	0x80000000UL
+#endif
+
+/*
+ * Task control block.  A task control block (TCB) is allocated for each task,
+ * and stores task state information, including a pointer to the task's context
+ * (the task's run time environment, including register values)
+ */
+typedef struct tskTaskControlBlock
+{
+	volatile StackType_t	*pxTopOfStack;	/*< Points to the location of the last item placed on the tasks stack.  THIS MUST BE THE FIRST MEMBER OF THE TCB STRUCT. */
+
+	#if ( portUSING_MPU_WRAPPERS == 1 )
+		xMPU_SETTINGS	xMPUSettings;		/*< The MPU settings are defined as part of the port layer.  THIS MUST BE THE SECOND MEMBER OF THE TCB STRUCT. */
+	#endif
+
+	ListItem_t			xStateListItem;	/*< The list that the state list item of a task is reference from denotes the state of that task (Ready, Blocked, Suspended ). */
+	ListItem_t			xEventListItem;		/*< Used to reference a task from an event list. */
+	UBaseType_t			uxPriority;			/*< The priority of the task.  0 is the lowest priority. */
+	StackType_t			*pxStack;			/*< Points to the start of the stack. */
+	char				pcTaskName[ configMAX_TASK_NAME_LEN ];/*< Descriptive name given to the task when created.  Facilitates debugging only. */ /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+	#if ( portSTACK_GROWTH > 0 )
+		StackType_t		*pxEndOfStack;		/*< Points to the end of the stack on architectures where the stack grows up from low memory. */
+	#endif
+
+	#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+		UBaseType_t		uxCriticalNesting;	/*< Holds the critical section nesting depth for ports that do not maintain their own count in the port layer. */
+	#endif
+
+	#if ( configUSE_TRACE_FACILITY == 1 )
+		UBaseType_t		uxTCBNumber;		/*< Stores a number that increments each time a TCB is created.  It allows debuggers to determine when a task has been deleted and then recreated. */
+		UBaseType_t		uxTaskNumber;		/*< Stores a number specifically for use by third party trace code. */
+	#endif
+
+	#if ( configUSE_MUTEXES == 1 )
+		UBaseType_t		uxBasePriority;		/*< The priority last assigned to the task - used by the priority inheritance mechanism. */
+		UBaseType_t		uxMutexesHeld;
+	#endif
+
+	#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+		TaskHookFunction_t pxTaskTag;
+	#endif
+
+	#if( configNUM_THREAD_LOCAL_STORAGE_POINTERS > 0 )
+		void *pvThreadLocalStoragePointers[ configNUM_THREAD_LOCAL_STORAGE_POINTERS ];
+	#endif
+
+	#if( configGENERATE_RUN_TIME_STATS == 1 )
+		uint32_t		ulRunTimeCounter;	/*< Stores the amount of time the task has spent in the Running state. */
+	#endif
+
+	#if ( configUSE_NEWLIB_REENTRANT == 1 )
+		/* Allocate a Newlib reent structure that is specific to this task.
+		Note Newlib support has been included by popular demand, but is not
+		used by the FreeRTOS maintainers themselves.  FreeRTOS is not
+		responsible for resulting newlib operation.  User must be familiar with
+		newlib and must provide system-wide implementations of the necessary
+		stubs. Be warned that (at the time of writing) the current newlib design
+		implements a system-wide malloc() that must be provided with locks. */
+		struct	_reent xNewLib_reent;
+	#endif
+
+	#if( configUSE_TASK_NOTIFICATIONS == 1 )
+		volatile uint32_t ulNotifiedValue;
+		volatile uint8_t ucNotifyState;
+	#endif
+
+	/* See the comments above the definition of
+	tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE. */
+	#if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 )
+		uint8_t	ucStaticallyAllocated; 		/*< Set to pdTRUE if the task is a statically allocated to ensure no attempt is made to free the memory. */
+	#endif
+
+	#if( INCLUDE_xTaskAbortDelay == 1 )
+		uint8_t ucDelayAborted;
+	#endif
+
+} tskTCB;
+
+/* The old tskTCB name is maintained above then typedefed to the new TCB_t name
+below to enable the use of older kernel aware debuggers. */
+typedef tskTCB TCB_t;
+
+/*lint -e956 A manual analysis and inspection has been used to determine which
+static variables must be declared volatile. */
+
+PRIVILEGED_DATA TCB_t * volatile pxCurrentTCB = NULL;
+
+/* Lists for ready and blocked tasks. --------------------*/
+PRIVILEGED_DATA static List_t pxReadyTasksLists[ configMAX_PRIORITIES ];/*< Prioritised ready tasks. */
+PRIVILEGED_DATA static List_t xDelayedTaskList1;						/*< Delayed tasks. */
+PRIVILEGED_DATA static List_t xDelayedTaskList2;						/*< Delayed tasks (two lists are used - one for delays that have overflowed the current tick count. */
+PRIVILEGED_DATA static List_t * volatile pxDelayedTaskList;				/*< Points to the delayed task list currently being used. */
+PRIVILEGED_DATA static List_t * volatile pxOverflowDelayedTaskList;		/*< Points to the delayed task list currently being used to hold tasks that have overflowed the current tick count. */
+PRIVILEGED_DATA static List_t xPendingReadyList;						/*< Tasks that have been readied while the scheduler was suspended.  They will be moved to the ready list when the scheduler is resumed. */
+
+#if( INCLUDE_vTaskDelete == 1 )
+
+	PRIVILEGED_DATA static List_t xTasksWaitingTermination;				/*< Tasks that have been deleted - but their memory not yet freed. */
+	PRIVILEGED_DATA static volatile UBaseType_t uxDeletedTasksWaitingCleanUp = ( UBaseType_t ) 0U;
+
+#endif
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+	PRIVILEGED_DATA static List_t xSuspendedTaskList;					/*< Tasks that are currently suspended. */
+
+#endif
+
+/* Other file private variables. --------------------------------*/
+PRIVILEGED_DATA static volatile UBaseType_t uxCurrentNumberOfTasks 	= ( UBaseType_t ) 0U;
+PRIVILEGED_DATA static volatile TickType_t xTickCount 				= ( TickType_t ) 0U;
+PRIVILEGED_DATA static volatile UBaseType_t uxTopReadyPriority 		= tskIDLE_PRIORITY;
+PRIVILEGED_DATA static volatile BaseType_t xSchedulerRunning 		= pdFALSE;
+PRIVILEGED_DATA static volatile UBaseType_t uxPendedTicks 			= ( UBaseType_t ) 0U;
+PRIVILEGED_DATA static volatile BaseType_t xYieldPending 			= pdFALSE;
+PRIVILEGED_DATA static volatile BaseType_t xNumOfOverflows 			= ( BaseType_t ) 0;
+PRIVILEGED_DATA static UBaseType_t uxTaskNumber 					= ( UBaseType_t ) 0U;
+PRIVILEGED_DATA static volatile TickType_t xNextTaskUnblockTime		= ( TickType_t ) 0U; /* Initialised to portMAX_DELAY before the scheduler starts. */
+PRIVILEGED_DATA static TaskHandle_t xIdleTaskHandle					= NULL;			/*< Holds the handle of the idle task.  The idle task is created automatically when the scheduler is started. */
+
+/* Context switches are held pending while the scheduler is suspended.  Also,
+interrupts must not manipulate the xStateListItem of a TCB, or any of the
+lists the xStateListItem can be referenced from, if the scheduler is suspended.
+If an interrupt needs to unblock a task while the scheduler is suspended then it
+moves the task's event list item into the xPendingReadyList, ready for the
+kernel to move the task from the pending ready list into the real ready list
+when the scheduler is unsuspended.  The pending ready list itself can only be
+accessed from a critical section. */
+PRIVILEGED_DATA static volatile UBaseType_t uxSchedulerSuspended	= ( UBaseType_t ) pdFALSE;
+
+#if ( configGENERATE_RUN_TIME_STATS == 1 )
+
+	PRIVILEGED_DATA static uint32_t ulTaskSwitchedInTime = 0UL;	/*< Holds the value of a timer/counter the last time a task was switched in. */
+	PRIVILEGED_DATA static uint32_t ulTotalRunTime = 0UL;		/*< Holds the total amount of execution time as defined by the run time counter clock. */
+
+#endif
+
+/*lint +e956 */
+
+/*-----------------------------------------------------------*/
+
+/* Callback function prototypes. --------------------------*/
+#if(  configCHECK_FOR_STACK_OVERFLOW > 0 )
+	extern void vApplicationStackOverflowHook( TaskHandle_t xTask, char *pcTaskName );
+#endif
+
+#if( configUSE_TICK_HOOK > 0 )
+	extern void vApplicationTickHook( void );
+#endif
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+	extern void vApplicationGetIdleTaskMemory( StaticTask_t **ppxIdleTaskTCBBuffer, StackType_t **ppxIdleTaskStackBuffer, uint32_t *pulIdleTaskStackSize );
+#endif
+
+/* File private functions. --------------------------------*/
+
+/**
+ * Utility task that simply returns pdTRUE if the task referenced by xTask is
+ * currently in the Suspended state, or pdFALSE if the task referenced by xTask
+ * is in any other state.
+ */
+#if ( INCLUDE_vTaskSuspend == 1 )
+	static BaseType_t prvTaskIsTaskSuspended( const TaskHandle_t xTask ) PRIVILEGED_FUNCTION;
+#endif /* INCLUDE_vTaskSuspend */
+
+/*
+ * Utility to ready all the lists used by the scheduler.  This is called
+ * automatically upon the creation of the first task.
+ */
+static void prvInitialiseTaskLists( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The idle task, which as all tasks is implemented as a never ending loop.
+ * The idle task is automatically created and added to the ready lists upon
+ * creation of the first user task.
+ *
+ * The portTASK_FUNCTION_PROTO() macro is used to allow port/compiler specific
+ * language extensions.  The equivalent prototype for this function is:
+ *
+ * void prvIdleTask( void *pvParameters );
+ *
+ */
+static portTASK_FUNCTION_PROTO( prvIdleTask, pvParameters );
+
+/*
+ * Utility to free all memory allocated by the scheduler to hold a TCB,
+ * including the stack pointed to by the TCB.
+ *
+ * This does not free memory allocated by the task itself (i.e. memory
+ * allocated by calls to pvPortMalloc from within the tasks application code).
+ */
+#if ( INCLUDE_vTaskDelete == 1 )
+
+	static void prvDeleteTCB( TCB_t *pxTCB ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Used only by the idle task.  This checks to see if anything has been placed
+ * in the list of tasks waiting to be deleted.  If so the task is cleaned up
+ * and its TCB deleted.
+ */
+static void prvCheckTasksWaitingTermination( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The currently executing task is entering the Blocked state.  Add the task to
+ * either the current or the overflow delayed task list.
+ */
+static void prvAddCurrentTaskToDelayedList( TickType_t xTicksToWait, const BaseType_t xCanBlockIndefinitely ) PRIVILEGED_FUNCTION;
+
+/*
+ * Fills an TaskStatus_t structure with information on each task that is
+ * referenced from the pxList list (which may be a ready list, a delayed list,
+ * a suspended list, etc.).
+ *
+ * THIS FUNCTION IS INTENDED FOR DEBUGGING ONLY, AND SHOULD NOT BE CALLED FROM
+ * NORMAL APPLICATION CODE.
+ */
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	static UBaseType_t prvListTasksWithinSingleList( TaskStatus_t *pxTaskStatusArray, List_t *pxList, eTaskState eState ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Searches pxList for a task with name pcNameToQuery - returning a handle to
+ * the task if it is found, or NULL if the task is not found.
+ */
+#if ( INCLUDE_xTaskGetHandle == 1 )
+
+	static TCB_t *prvSearchForNameWithinSingleList( List_t *pxList, const char pcNameToQuery[] ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * When a task is created, the stack of the task is filled with a known value.
+ * This function determines the 'high water mark' of the task stack by
+ * determining how much of the stack remains at the original preset value.
+ */
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )
+
+	static uint16_t prvTaskCheckFreeStackSpace( const uint8_t * pucStackByte ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Return the amount of time, in ticks, that will pass before the kernel will
+ * next move a task from the Blocked state to the Running state.
+ *
+ * This conditional compilation should use inequality to 0, not equality to 1.
+ * This is to ensure portSUPPRESS_TICKS_AND_SLEEP() can be called when user
+ * defined low power mode implementations require configUSE_TICKLESS_IDLE to be
+ * set to a value other than 1.
+ */
+#if ( configUSE_TICKLESS_IDLE != 0 )
+
+	static TickType_t prvGetExpectedIdleTime( void ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Set xNextTaskUnblockTime to the time at which the next Blocked state task
+ * will exit the Blocked state.
+ */
+static void prvResetNextTaskUnblockTime( void );
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )
+
+	/*
+	 * Helper function used to pad task names with spaces when printing out
+	 * human readable tables of task information.
+	 */
+	static char *prvWriteNameToBuffer( char *pcBuffer, const char *pcTaskName ) PRIVILEGED_FUNCTION;
+
+#endif
+
+/*
+ * Called after a Task_t structure has been allocated either statically or
+ * dynamically to fill in the structure's members.
+ */
+static void prvInitialiseNewTask( 	TaskFunction_t pxTaskCode,
+									const char * const pcName,
+									const uint32_t ulStackDepth,
+									void * const pvParameters,
+									UBaseType_t uxPriority,
+									TaskHandle_t * const pxCreatedTask,
+									TCB_t *pxNewTCB,
+									const MemoryRegion_t * const xRegions ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+
+/*
+ * Called after a new task has been created and initialised to place the task
+ * under the control of the scheduler.
+ */
+static void prvAddNewTaskToReadyList( TCB_t *pxNewTCB ) PRIVILEGED_FUNCTION;
+
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+	TaskHandle_t xTaskCreateStatic(	TaskFunction_t pxTaskCode,
+									const char * const pcName,
+									const uint32_t ulStackDepth,
+									void * const pvParameters,
+									UBaseType_t uxPriority,
+									StackType_t * const puxStackBuffer,
+									StaticTask_t * const pxTaskBuffer ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	{
+	TCB_t *pxNewTCB;
+	TaskHandle_t xReturn;
+
+		configASSERT( puxStackBuffer != NULL );
+		configASSERT( pxTaskBuffer != NULL );
+
+		if( ( pxTaskBuffer != NULL ) && ( puxStackBuffer != NULL ) )
+		{
+			/* The memory used for the task's TCB and stack are passed into this
+			function - use them. */
+			pxNewTCB = ( TCB_t * ) pxTaskBuffer; /*lint !e740 Unusual cast is ok as the structures are designed to have the same alignment, and the size is checked by an assert. */
+			pxNewTCB->pxStack = ( StackType_t * ) puxStackBuffer;
+
+			#if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 )
+			{
+				/* Tasks can be created statically or dynamically, so note this
+				task was created statically in case the task is later deleted. */
+				pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_AND_TCB;
+			}
+			#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+
+			prvInitialiseNewTask( pxTaskCode, pcName, ulStackDepth, pvParameters, uxPriority, &xReturn, pxNewTCB, NULL );
+			prvAddNewTaskToReadyList( pxNewTCB );
+		}
+		else
+		{
+			xReturn = NULL;
+		}
+
+		return xReturn;
+	}
+
+#endif /* SUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+#if( portUSING_MPU_WRAPPERS == 1 )
+
+	BaseType_t xTaskCreateRestricted( const TaskParameters_t * const pxTaskDefinition, TaskHandle_t *pxCreatedTask )
+	{
+	TCB_t *pxNewTCB;
+	BaseType_t xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
+
+		configASSERT( pxTaskDefinition->puxStackBuffer );
+
+		if( pxTaskDefinition->puxStackBuffer != NULL )
+		{
+			/* Allocate space for the TCB.  Where the memory comes from depends
+			on the implementation of the port malloc function and whether or
+			not static allocation is being used. */
+			pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) );
+
+			if( pxNewTCB != NULL )
+			{
+				/* Store the stack location in the TCB. */
+				pxNewTCB->pxStack = pxTaskDefinition->puxStackBuffer;
+
+				/* Tasks can be created statically or dynamically, so note
+				this task had a statically allocated stack in case it is
+				later deleted.  The TCB was allocated dynamically. */
+				pxNewTCB->ucStaticallyAllocated = tskSTATICALLY_ALLOCATED_STACK_ONLY;
+
+				prvInitialiseNewTask(	pxTaskDefinition->pvTaskCode,
+										pxTaskDefinition->pcName,
+										( uint32_t ) pxTaskDefinition->usStackDepth,
+										pxTaskDefinition->pvParameters,
+										pxTaskDefinition->uxPriority,
+										pxCreatedTask, pxNewTCB,
+										pxTaskDefinition->xRegions );
+
+				prvAddNewTaskToReadyList( pxNewTCB );
+				xReturn = pdPASS;
+			}
+		}
+
+		return xReturn;
+	}
+
+#endif /* portUSING_MPU_WRAPPERS */
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+
+	BaseType_t xTaskCreate(	TaskFunction_t pxTaskCode,
+							const char * const pcName,
+							const uint16_t usStackDepth,
+							void * const pvParameters,
+							UBaseType_t uxPriority,
+							TaskHandle_t * const pxCreatedTask ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	{
+	TCB_t *pxNewTCB;
+	BaseType_t xReturn;
+
+		/* If the stack grows down then allocate the stack then the TCB so the stack
+		does not grow into the TCB.  Likewise if the stack grows up then allocate
+		the TCB then the stack. */
+		#if( portSTACK_GROWTH > 0 )
+		{
+			/* Allocate space for the TCB.  Where the memory comes from depends on
+			the implementation of the port malloc function and whether or not static
+			allocation is being used. */
+			pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) );
+
+			if( pxNewTCB != NULL )
+			{
+				/* Allocate space for the stack used by the task being created.
+				The base of the stack memory stored in the TCB so the task can
+				be deleted later if required. */
+				pxNewTCB->pxStack = ( StackType_t * ) pvPortMalloc( ( ( ( size_t ) usStackDepth ) * sizeof( StackType_t ) ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+				if( pxNewTCB->pxStack == NULL )
+				{
+					/* Could not allocate the stack.  Delete the allocated TCB. */
+					vPortFree( pxNewTCB );
+					pxNewTCB = NULL;
+				}
+			}
+		}
+		#else /* portSTACK_GROWTH */
+		{
+		StackType_t *pxStack;
+
+			/* Allocate space for the stack used by the task being created. */
+			pxStack = ( StackType_t * ) pvPortMalloc( ( ( ( size_t ) usStackDepth ) * sizeof( StackType_t ) ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+			if( pxStack != NULL )
+			{
+				/* Allocate space for the TCB. */
+				pxNewTCB = ( TCB_t * ) pvPortMalloc( sizeof( TCB_t ) ); /*lint !e961 MISRA exception as the casts are only redundant for some paths. */
+
+				if( pxNewTCB != NULL )
+				{
+					/* Store the stack location in the TCB. */
+					pxNewTCB->pxStack = pxStack;
+				}
+				else
+				{
+					/* The stack cannot be used as the TCB was not created.  Free
+					it again. */
+					vPortFree( pxStack );
+				}
+			}
+			else
+			{
+				pxNewTCB = NULL;
+			}
+		}
+		#endif /* portSTACK_GROWTH */
+
+		if( pxNewTCB != NULL )
+		{
+			#if( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE != 0 )
+			{
+				/* Tasks can be created statically or dynamically, so note this
+				task was created dynamically in case it is later deleted. */
+				pxNewTCB->ucStaticallyAllocated = tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB;
+			}
+			#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+			prvInitialiseNewTask( pxTaskCode, pcName, ( uint32_t ) usStackDepth, pvParameters, uxPriority, pxCreatedTask, pxNewTCB, NULL );
+			prvAddNewTaskToReadyList( pxNewTCB );
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY;
+		}
+
+		return xReturn;
+	}
+
+#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseNewTask( 	TaskFunction_t pxTaskCode,
+									const char * const pcName,
+									const uint32_t ulStackDepth,
+									void * const pvParameters,
+									UBaseType_t uxPriority,
+									TaskHandle_t * const pxCreatedTask,
+									TCB_t *pxNewTCB,
+									const MemoryRegion_t * const xRegions ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+{
+StackType_t *pxTopOfStack;
+UBaseType_t x;
+
+	#if( portUSING_MPU_WRAPPERS == 1 )
+		/* Should the task be created in privileged mode? */
+		BaseType_t xRunPrivileged;
+		if( ( uxPriority & portPRIVILEGE_BIT ) != 0U )
+		{
+			xRunPrivileged = pdTRUE;
+		}
+		else
+		{
+			xRunPrivileged = pdFALSE;
+		}
+		uxPriority &= ~portPRIVILEGE_BIT;
+	#endif /* portUSING_MPU_WRAPPERS == 1 */
+
+	/* Avoid dependency on memset() if it is not required. */
+	#if( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) || ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )
+	{
+		/* Fill the stack with a known value to assist debugging. */
+		( void ) memset( pxNewTCB->pxStack, ( int ) tskSTACK_FILL_BYTE, ( size_t ) ulStackDepth * sizeof( StackType_t ) );
+	}
+	#endif /* ( ( configCHECK_FOR_STACK_OVERFLOW > 1 ) || ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) ) ) */
+
+	/* Calculate the top of stack address.  This depends on whether the stack
+	grows from high memory to low (as per the 80x86) or vice versa.
+	portSTACK_GROWTH is used to make the result positive or negative as required
+	by the port. */
+	#if( portSTACK_GROWTH < 0 )
+	{
+		pxTopOfStack = pxNewTCB->pxStack + ( ulStackDepth - ( uint32_t ) 1 );
+		pxTopOfStack = ( StackType_t * ) ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack ) & ( ~( ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) ) ); /*lint !e923 MISRA exception.  Avoiding casts between pointers and integers is not practical.  Size differences accounted for using portPOINTER_SIZE_TYPE type. */
+
+		/* Check the alignment of the calculated top of stack is correct. */
+		configASSERT( ( ( ( portPOINTER_SIZE_TYPE ) pxTopOfStack & ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );
+	}
+	#else /* portSTACK_GROWTH */
+	{
+		pxTopOfStack = pxNewTCB->pxStack;
+
+		/* Check the alignment of the stack buffer is correct. */
+		configASSERT( ( ( ( portPOINTER_SIZE_TYPE ) pxNewTCB->pxStack & ( portPOINTER_SIZE_TYPE ) portBYTE_ALIGNMENT_MASK ) == 0UL ) );
+
+		/* The other extreme of the stack space is required if stack checking is
+		performed. */
+		pxNewTCB->pxEndOfStack = pxNewTCB->pxStack + ( ulStackDepth - ( uint32_t ) 1 );
+	}
+	#endif /* portSTACK_GROWTH */
+
+	/* Store the task name in the TCB. */
+	for( x = ( UBaseType_t ) 0; x < ( UBaseType_t ) configMAX_TASK_NAME_LEN; x++ )
+	{
+		pxNewTCB->pcTaskName[ x ] = pcName[ x ];
+
+		/* Don't copy all configMAX_TASK_NAME_LEN if the string is shorter than
+		configMAX_TASK_NAME_LEN characters just in case the memory after the
+		string is not accessible (extremely unlikely). */
+		if( pcName[ x ] == 0x00 )
+		{
+			break;
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+	/* Ensure the name string is terminated in the case that the string length
+	was greater or equal to configMAX_TASK_NAME_LEN. */
+	pxNewTCB->pcTaskName[ configMAX_TASK_NAME_LEN - 1 ] = '\0';
+
+	/* This is used as an array index so must ensure it's not too large.  First
+	remove the privilege bit if one is present. */
+	if( uxPriority >= ( UBaseType_t ) configMAX_PRIORITIES )
+	{
+		uxPriority = ( UBaseType_t ) configMAX_PRIORITIES - ( UBaseType_t ) 1U;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	pxNewTCB->uxPriority = uxPriority;
+	#if ( configUSE_MUTEXES == 1 )
+	{
+		pxNewTCB->uxBasePriority = uxPriority;
+		pxNewTCB->uxMutexesHeld = 0;
+	}
+	#endif /* configUSE_MUTEXES */
+
+	vListInitialiseItem( &( pxNewTCB->xStateListItem ) );
+	vListInitialiseItem( &( pxNewTCB->xEventListItem ) );
+
+	/* Set the pxNewTCB as a link back from the ListItem_t.  This is so we can get
+	back to	the containing TCB from a generic item in a list. */
+	listSET_LIST_ITEM_OWNER( &( pxNewTCB->xStateListItem ), pxNewTCB );
+
+	/* Event lists are always in priority order. */
+	listSET_LIST_ITEM_VALUE( &( pxNewTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+	listSET_LIST_ITEM_OWNER( &( pxNewTCB->xEventListItem ), pxNewTCB );
+
+	#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+	{
+		pxNewTCB->uxCriticalNesting = ( UBaseType_t ) 0U;
+	}
+	#endif /* portCRITICAL_NESTING_IN_TCB */
+
+	#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+	{
+		pxNewTCB->pxTaskTag = NULL;
+	}
+	#endif /* configUSE_APPLICATION_TASK_TAG */
+
+	#if ( configGENERATE_RUN_TIME_STATS == 1 )
+	{
+		pxNewTCB->ulRunTimeCounter = 0UL;
+	}
+	#endif /* configGENERATE_RUN_TIME_STATS */
+
+	#if ( portUSING_MPU_WRAPPERS == 1 )
+	{
+		vPortStoreTaskMPUSettings( &( pxNewTCB->xMPUSettings ), xRegions, pxNewTCB->pxStack, ulStackDepth );
+	}
+	#else
+	{
+		/* Avoid compiler warning about unreferenced parameter. */
+		( void ) xRegions;
+	}
+	#endif
+
+	#if( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )
+	{
+		for( x = 0; x < ( UBaseType_t ) configNUM_THREAD_LOCAL_STORAGE_POINTERS; x++ )
+		{
+			pxNewTCB->pvThreadLocalStoragePointers[ x ] = NULL;
+		}
+	}
+	#endif
+
+	#if ( configUSE_TASK_NOTIFICATIONS == 1 )
+	{
+		pxNewTCB->ulNotifiedValue = 0;
+		pxNewTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+	}
+	#endif
+
+	#if ( configUSE_NEWLIB_REENTRANT == 1 )
+	{
+		/* Initialise this task's Newlib reent structure. */
+		_REENT_INIT_PTR( ( &( pxNewTCB->xNewLib_reent ) ) );
+	}
+	#endif
+
+	#if( INCLUDE_xTaskAbortDelay == 1 )
+	{
+		pxNewTCB->ucDelayAborted = pdFALSE;
+	}
+	#endif
+
+	/* Initialize the TCB stack to look as if the task was already running,
+	but had been interrupted by the scheduler.  The return address is set
+	to the start of the task function. Once the stack has been initialised
+	the	top of stack variable is updated. */
+	#if( portUSING_MPU_WRAPPERS == 1 )
+	{
+		pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters, xRunPrivileged );
+	}
+	#else /* portUSING_MPU_WRAPPERS */
+	{
+		pxNewTCB->pxTopOfStack = pxPortInitialiseStack( pxTopOfStack, pxTaskCode, pvParameters );
+	}
+	#endif /* portUSING_MPU_WRAPPERS */
+
+	if( ( void * ) pxCreatedTask != NULL )
+	{
+		/* Pass the handle out in an anonymous way.  The handle can be used to
+		change the created task's priority, delete the created task, etc.*/
+		*pxCreatedTask = ( TaskHandle_t ) pxNewTCB;
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+}
+/*-----------------------------------------------------------*/
+
+static void prvAddNewTaskToReadyList( TCB_t *pxNewTCB )
+{
+	/* Ensure interrupts don't access the task lists while the lists are being
+	updated. */
+	taskENTER_CRITICAL();
+	{
+		uxCurrentNumberOfTasks++;
+		if( pxCurrentTCB == NULL )
+		{
+			/* There are no other tasks, or all the other tasks are in
+			the suspended state - make this the current task. */
+			pxCurrentTCB = pxNewTCB;
+
+			if( uxCurrentNumberOfTasks == ( UBaseType_t ) 1 )
+			{
+				/* This is the first task to be created so do the preliminary
+				initialisation required.  We will not recover if this call
+				fails, but we will report the failure. */
+				prvInitialiseTaskLists();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			/* If the scheduler is not already running, make this task the
+			current task if it is the highest priority task to be created
+			so far. */
+			if( xSchedulerRunning == pdFALSE )
+			{
+				if( pxCurrentTCB->uxPriority <= pxNewTCB->uxPriority )
+				{
+					pxCurrentTCB = pxNewTCB;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+
+		uxTaskNumber++;
+
+		#if ( configUSE_TRACE_FACILITY == 1 )
+		{
+			/* Add a counter into the TCB for tracing only. */
+			pxNewTCB->uxTCBNumber = uxTaskNumber;
+		}
+		#endif /* configUSE_TRACE_FACILITY */
+		traceTASK_CREATE( pxNewTCB );
+
+		prvAddTaskToReadyList( pxNewTCB );
+
+		portSETUP_TCB( pxNewTCB );
+	}
+	taskEXIT_CRITICAL();
+
+	if( xSchedulerRunning != pdFALSE )
+	{
+		/* If the created task is of a higher priority than the current task
+		then it should run now. */
+		if( pxCurrentTCB->uxPriority < pxNewTCB->uxPriority )
+		{
+			taskYIELD_IF_USING_PREEMPTION();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+}
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelete == 1 )
+
+	void vTaskDelete( TaskHandle_t xTaskToDelete )
+	{
+	TCB_t *pxTCB;
+
+		taskENTER_CRITICAL();
+		{
+			/* If null is passed in here then it is the calling task that is
+			being deleted. */
+			pxTCB = prvGetTCBFromHandle( xTaskToDelete );
+
+			/* Remove task from the ready list. */
+			if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+			{
+				taskRESET_READY_PRIORITY( pxTCB->uxPriority );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			/* Is the task waiting on an event also? */
+			if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+			{
+				( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			/* Increment the uxTaskNumber also so kernel aware debuggers can
+			detect that the task lists need re-generating.  This is done before
+			portPRE_TASK_DELETE_HOOK() as in the Windows port that macro will
+			not return. */
+			uxTaskNumber++;
+
+			if( pxTCB == pxCurrentTCB )
+			{
+				/* A task is deleting itself.  This cannot complete within the
+				task itself, as a context switch to another task is required.
+				Place the task in the termination list.  The idle task will
+				check the termination list and free up any memory allocated by
+				the scheduler for the TCB and stack of the deleted task. */
+				vListInsertEnd( &xTasksWaitingTermination, &( pxTCB->xStateListItem ) );
+
+				/* Increment the ucTasksDeleted variable so the idle task knows
+				there is a task that has been deleted and that it should therefore
+				check the xTasksWaitingTermination list. */
+				++uxDeletedTasksWaitingCleanUp;
+
+				/* The pre-delete hook is primarily for the Windows simulator,
+				in which Windows specific clean up operations are performed,
+				after which it is not possible to yield away from this task -
+				hence xYieldPending is used to latch that a context switch is
+				required. */
+				portPRE_TASK_DELETE_HOOK( pxTCB, &xYieldPending );
+			}
+			else
+			{
+				--uxCurrentNumberOfTasks;
+				prvDeleteTCB( pxTCB );
+
+				/* Reset the next expected unblock time in case it referred to
+				the task that has just been deleted. */
+				prvResetNextTaskUnblockTime();
+			}
+
+			traceTASK_DELETE( pxTCB );
+		}
+		taskEXIT_CRITICAL();
+
+		/* Force a reschedule if it is the currently running task that has just
+		been deleted. */
+		if( xSchedulerRunning != pdFALSE )
+		{
+			if( pxTCB == pxCurrentTCB )
+			{
+				configASSERT( uxSchedulerSuspended == 0 );
+				portYIELD_WITHIN_API();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+	}
+
+#endif /* INCLUDE_vTaskDelete */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelayUntil == 1 )
+
+	void vTaskDelayUntil( TickType_t * const pxPreviousWakeTime, const TickType_t xTimeIncrement )
+	{
+	TickType_t xTimeToWake;
+	BaseType_t xAlreadyYielded, xShouldDelay = pdFALSE;
+
+		configASSERT( pxPreviousWakeTime );
+		configASSERT( ( xTimeIncrement > 0U ) );
+		configASSERT( uxSchedulerSuspended == 0 );
+
+		vTaskSuspendAll();
+		{
+			/* Minor optimisation.  The tick count cannot change in this
+			block. */
+			const TickType_t xConstTickCount = xTickCount;
+
+			/* Generate the tick time at which the task wants to wake. */
+			xTimeToWake = *pxPreviousWakeTime + xTimeIncrement;
+
+			if( xConstTickCount < *pxPreviousWakeTime )
+			{
+				/* The tick count has overflowed since this function was
+				lasted called.  In this case the only time we should ever
+				actually delay is if the wake time has also	overflowed,
+				and the wake time is greater than the tick time.  When this
+				is the case it is as if neither time had overflowed. */
+				if( ( xTimeToWake < *pxPreviousWakeTime ) && ( xTimeToWake > xConstTickCount ) )
+				{
+					xShouldDelay = pdTRUE;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				/* The tick time has not overflowed.  In this case we will
+				delay if either the wake time has overflowed, and/or the
+				tick time is less than the wake time. */
+				if( ( xTimeToWake < *pxPreviousWakeTime ) || ( xTimeToWake > xConstTickCount ) )
+				{
+					xShouldDelay = pdTRUE;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+
+			/* Update the wake time ready for the next call. */
+			*pxPreviousWakeTime = xTimeToWake;
+
+			if( xShouldDelay != pdFALSE )
+			{
+				traceTASK_DELAY_UNTIL( xTimeToWake );
+
+				/* prvAddCurrentTaskToDelayedList() needs the block time, not
+				the time to wake, so subtract the current tick count. */
+				prvAddCurrentTaskToDelayedList( xTimeToWake - xConstTickCount, pdFALSE );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		xAlreadyYielded = xTaskResumeAll();
+
+		/* Force a reschedule if xTaskResumeAll has not already done so, we may
+		have put ourselves to sleep. */
+		if( xAlreadyYielded == pdFALSE )
+		{
+			portYIELD_WITHIN_API();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* INCLUDE_vTaskDelayUntil */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelay == 1 )
+
+	void vTaskDelay( const TickType_t xTicksToDelay )
+	{
+	BaseType_t xAlreadyYielded = pdFALSE;
+
+		/* A delay time of zero just forces a reschedule. */
+		if( xTicksToDelay > ( TickType_t ) 0U )
+		{
+			configASSERT( uxSchedulerSuspended == 0 );
+			vTaskSuspendAll();
+			{
+				traceTASK_DELAY();
+
+				/* A task that is removed from the event list while the
+				scheduler is suspended will not get placed in the ready
+				list or removed from the blocked list until the scheduler
+				is resumed.
+
+				This task cannot be in an event list as it is the currently
+				executing task. */
+				prvAddCurrentTaskToDelayedList( xTicksToDelay, pdFALSE );
+			}
+			xAlreadyYielded = xTaskResumeAll();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		/* Force a reschedule if xTaskResumeAll has not already done so, we may
+		have put ourselves to sleep. */
+		if( xAlreadyYielded == pdFALSE )
+		{
+			portYIELD_WITHIN_API();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* INCLUDE_vTaskDelay */
+/*-----------------------------------------------------------*/
+
+#if( ( INCLUDE_eTaskGetState == 1 ) || ( configUSE_TRACE_FACILITY == 1 ) )
+
+	eTaskState eTaskGetState( TaskHandle_t xTask )
+	{
+	eTaskState eReturn;
+	List_t *pxStateList;
+	const TCB_t * const pxTCB = ( TCB_t * ) xTask;
+
+		configASSERT( pxTCB );
+
+		if( pxTCB == pxCurrentTCB )
+		{
+			/* The task calling this function is querying its own state. */
+			eReturn = eRunning;
+		}
+		else
+		{
+			taskENTER_CRITICAL();
+			{
+				pxStateList = ( List_t * ) listLIST_ITEM_CONTAINER( &( pxTCB->xStateListItem ) );
+			}
+			taskEXIT_CRITICAL();
+
+			if( ( pxStateList == pxDelayedTaskList ) || ( pxStateList == pxOverflowDelayedTaskList ) )
+			{
+				/* The task being queried is referenced from one of the Blocked
+				lists. */
+				eReturn = eBlocked;
+			}
+
+			#if ( INCLUDE_vTaskSuspend == 1 )
+				else if( pxStateList == &xSuspendedTaskList )
+				{
+					/* The task being queried is referenced from the suspended
+					list.  Is it genuinely suspended or is it block
+					indefinitely? */
+					if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL )
+					{
+						eReturn = eSuspended;
+					}
+					else
+					{
+						eReturn = eBlocked;
+					}
+				}
+			#endif
+
+			#if ( INCLUDE_vTaskDelete == 1 )
+				else if( ( pxStateList == &xTasksWaitingTermination ) || ( pxStateList == NULL ) )
+				{
+					/* The task being queried is referenced from the deleted
+					tasks list, or it is not referenced from any lists at
+					all. */
+					eReturn = eDeleted;
+				}
+			#endif
+
+			else /*lint !e525 Negative indentation is intended to make use of pre-processor clearer. */
+			{
+				/* If the task is not in any other state, it must be in the
+				Ready (including pending ready) state. */
+				eReturn = eReady;
+			}
+		}
+
+		return eReturn;
+	} /*lint !e818 xTask cannot be a pointer to const because it is a typedef. */
+
+#endif /* INCLUDE_eTaskGetState */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskPriorityGet == 1 )
+
+	UBaseType_t uxTaskPriorityGet( TaskHandle_t xTask )
+	{
+	TCB_t *pxTCB;
+	UBaseType_t uxReturn;
+
+		taskENTER_CRITICAL();
+		{
+			/* If null is passed in here then it is the priority of the that
+			called uxTaskPriorityGet() that is being queried. */
+			pxTCB = prvGetTCBFromHandle( xTask );
+			uxReturn = pxTCB->uxPriority;
+		}
+		taskEXIT_CRITICAL();
+
+		return uxReturn;
+	}
+
+#endif /* INCLUDE_uxTaskPriorityGet */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskPriorityGet == 1 )
+
+	UBaseType_t uxTaskPriorityGetFromISR( TaskHandle_t xTask )
+	{
+	TCB_t *pxTCB;
+	UBaseType_t uxReturn, uxSavedInterruptState;
+
+		/* RTOS ports that support interrupt nesting have the concept of a
+		maximum	system call (or maximum API call) interrupt priority.
+		Interrupts that are	above the maximum system call priority are keep
+		permanently enabled, even when the RTOS kernel is in a critical section,
+		but cannot make any calls to FreeRTOS API functions.  If configASSERT()
+		is defined in FreeRTOSConfig.h then
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+		failure if a FreeRTOS API function is called from an interrupt that has
+		been assigned a priority above the configured maximum system call
+		priority.  Only FreeRTOS functions that end in FromISR can be called
+		from interrupts	that have been assigned a priority at or (logically)
+		below the maximum system call interrupt priority.  FreeRTOS maintains a
+		separate interrupt safe API to ensure interrupt entry is as fast and as
+		simple as possible.  More information (albeit Cortex-M specific) is
+		provided on the following link:
+		http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+		uxSavedInterruptState = portSET_INTERRUPT_MASK_FROM_ISR();
+		{
+			/* If null is passed in here then it is the priority of the calling
+			task that is being queried. */
+			pxTCB = prvGetTCBFromHandle( xTask );
+			uxReturn = pxTCB->uxPriority;
+		}
+		portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptState );
+
+		return uxReturn;
+	}
+
+#endif /* INCLUDE_uxTaskPriorityGet */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskPrioritySet == 1 )
+
+	void vTaskPrioritySet( TaskHandle_t xTask, UBaseType_t uxNewPriority )
+	{
+	TCB_t *pxTCB;
+	UBaseType_t uxCurrentBasePriority, uxPriorityUsedOnEntry;
+	BaseType_t xYieldRequired = pdFALSE;
+
+		configASSERT( ( uxNewPriority < configMAX_PRIORITIES ) );
+
+		/* Ensure the new priority is valid. */
+		if( uxNewPriority >= ( UBaseType_t ) configMAX_PRIORITIES )
+		{
+			uxNewPriority = ( UBaseType_t ) configMAX_PRIORITIES - ( UBaseType_t ) 1U;
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		taskENTER_CRITICAL();
+		{
+			/* If null is passed in here then it is the priority of the calling
+			task that is being changed. */
+			pxTCB = prvGetTCBFromHandle( xTask );
+
+			traceTASK_PRIORITY_SET( pxTCB, uxNewPriority );
+
+			#if ( configUSE_MUTEXES == 1 )
+			{
+				uxCurrentBasePriority = pxTCB->uxBasePriority;
+			}
+			#else
+			{
+				uxCurrentBasePriority = pxTCB->uxPriority;
+			}
+			#endif
+
+			if( uxCurrentBasePriority != uxNewPriority )
+			{
+				/* The priority change may have readied a task of higher
+				priority than the calling task. */
+				if( uxNewPriority > uxCurrentBasePriority )
+				{
+					if( pxTCB != pxCurrentTCB )
+					{
+						/* The priority of a task other than the currently
+						running task is being raised.  Is the priority being
+						raised above that of the running task? */
+						if( uxNewPriority >= pxCurrentTCB->uxPriority )
+						{
+							xYieldRequired = pdTRUE;
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						/* The priority of the running task is being raised,
+						but the running task must already be the highest
+						priority task able to run so no yield is required. */
+					}
+				}
+				else if( pxTCB == pxCurrentTCB )
+				{
+					/* Setting the priority of the running task down means
+					there may now be another task of higher priority that
+					is ready to execute. */
+					xYieldRequired = pdTRUE;
+				}
+				else
+				{
+					/* Setting the priority of any other task down does not
+					require a yield as the running task must be above the
+					new priority of the task being modified. */
+				}
+
+				/* Remember the ready list the task might be referenced from
+				before its uxPriority member is changed so the
+				taskRESET_READY_PRIORITY() macro can function correctly. */
+				uxPriorityUsedOnEntry = pxTCB->uxPriority;
+
+				#if ( configUSE_MUTEXES == 1 )
+				{
+					/* Only change the priority being used if the task is not
+					currently using an inherited priority. */
+					if( pxTCB->uxBasePriority == pxTCB->uxPriority )
+					{
+						pxTCB->uxPriority = uxNewPriority;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* The base priority gets set whatever. */
+					pxTCB->uxBasePriority = uxNewPriority;
+				}
+				#else
+				{
+					pxTCB->uxPriority = uxNewPriority;
+				}
+				#endif
+
+				/* Only reset the event list item value if the value is not
+				being used for anything else. */
+				if( ( listGET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ) ) & taskEVENT_LIST_ITEM_VALUE_IN_USE ) == 0UL )
+				{
+					listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) uxNewPriority ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				/* If the task is in the blocked or suspended list we need do
+				nothing more than change it's priority variable. However, if
+				the task is in a ready list it needs to be removed and placed
+				in the list appropriate to its new priority. */
+				if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ uxPriorityUsedOnEntry ] ), &( pxTCB->xStateListItem ) ) != pdFALSE )
+				{
+					/* The task is currently in its ready list - remove before adding
+					it to it's new ready list.  As we are in a critical section we
+					can do this even if the scheduler is suspended. */
+					if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+					{
+						/* It is known that the task is in its ready list so
+						there is no need to check again and the port level
+						reset macro can be called directly. */
+						portRESET_READY_PRIORITY( uxPriorityUsedOnEntry, uxTopReadyPriority );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+					prvAddTaskToReadyList( pxTCB );
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				if( xYieldRequired != pdFALSE )
+				{
+					taskYIELD_IF_USING_PREEMPTION();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				/* Remove compiler warning about unused variables when the port
+				optimised task selection is not being used. */
+				( void ) uxPriorityUsedOnEntry;
+			}
+		}
+		taskEXIT_CRITICAL();
+	}
+
+#endif /* INCLUDE_vTaskPrioritySet */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+	void vTaskSuspend( TaskHandle_t xTaskToSuspend )
+	{
+	TCB_t *pxTCB;
+
+		taskENTER_CRITICAL();
+		{
+			/* If null is passed in here then it is the running task that is
+			being suspended. */
+			pxTCB = prvGetTCBFromHandle( xTaskToSuspend );
+
+			traceTASK_SUSPEND( pxTCB );
+
+			/* Remove task from the ready/delayed list and place in the
+			suspended list. */
+			if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+			{
+				taskRESET_READY_PRIORITY( pxTCB->uxPriority );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			/* Is the task waiting on an event also? */
+			if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+			{
+				( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			vListInsertEnd( &xSuspendedTaskList, &( pxTCB->xStateListItem ) );
+		}
+		taskEXIT_CRITICAL();
+
+		if( xSchedulerRunning != pdFALSE )
+		{
+			/* Reset the next expected unblock time in case it referred to the
+			task that is now in the Suspended state. */
+			taskENTER_CRITICAL();
+			{
+				prvResetNextTaskUnblockTime();
+			}
+			taskEXIT_CRITICAL();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		if( pxTCB == pxCurrentTCB )
+		{
+			if( xSchedulerRunning != pdFALSE )
+			{
+				/* The current task has just been suspended. */
+				configASSERT( uxSchedulerSuspended == 0 );
+				portYIELD_WITHIN_API();
+			}
+			else
+			{
+				/* The scheduler is not running, but the task that was pointed
+				to by pxCurrentTCB has just been suspended and pxCurrentTCB
+				must be adjusted to point to a different task. */
+				if( listCURRENT_LIST_LENGTH( &xSuspendedTaskList ) == uxCurrentNumberOfTasks )
+				{
+					/* No other tasks are ready, so set pxCurrentTCB back to
+					NULL so when the next task is created pxCurrentTCB will
+					be set to point to it no matter what its relative priority
+					is. */
+					pxCurrentTCB = NULL;
+				}
+				else
+				{
+					vTaskSwitchContext();
+				}
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* INCLUDE_vTaskSuspend */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+	static BaseType_t prvTaskIsTaskSuspended( const TaskHandle_t xTask )
+	{
+	BaseType_t xReturn = pdFALSE;
+	const TCB_t * const pxTCB = ( TCB_t * ) xTask;
+
+		/* Accesses xPendingReadyList so must be called from a critical
+		section. */
+
+		/* It does not make sense to check if the calling task is suspended. */
+		configASSERT( xTask );
+
+		/* Is the task being resumed actually in the suspended list? */
+		if( listIS_CONTAINED_WITHIN( &xSuspendedTaskList, &( pxTCB->xStateListItem ) ) != pdFALSE )
+		{
+			/* Has the task already been resumed from within an ISR? */
+			if( listIS_CONTAINED_WITHIN( &xPendingReadyList, &( pxTCB->xEventListItem ) ) == pdFALSE )
+			{
+				/* Is it in the suspended list because it is in the	Suspended
+				state, or because is is blocked with no timeout? */
+				if( listIS_CONTAINED_WITHIN( NULL, &( pxTCB->xEventListItem ) ) != pdFALSE )
+				{
+					xReturn = pdTRUE;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return xReturn;
+	} /*lint !e818 xTask cannot be a pointer to const because it is a typedef. */
+
+#endif /* INCLUDE_vTaskSuspend */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskSuspend == 1 )
+
+	void vTaskResume( TaskHandle_t xTaskToResume )
+	{
+	TCB_t * const pxTCB = ( TCB_t * ) xTaskToResume;
+
+		/* It does not make sense to resume the calling task. */
+		configASSERT( xTaskToResume );
+
+		/* The parameter cannot be NULL as it is impossible to resume the
+		currently executing task. */
+		if( ( pxTCB != NULL ) && ( pxTCB != pxCurrentTCB ) )
+		{
+			taskENTER_CRITICAL();
+			{
+				if( prvTaskIsTaskSuspended( pxTCB ) != pdFALSE )
+				{
+					traceTASK_RESUME( pxTCB );
+
+					/* As we are in a critical section we can access the ready
+					lists even if the scheduler is suspended. */
+					( void ) uxListRemove(  &( pxTCB->xStateListItem ) );
+					prvAddTaskToReadyList( pxTCB );
+
+					/* We may have just resumed a higher priority task. */
+					if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+					{
+						/* This yield may not cause the task just resumed to run,
+						but will leave the lists in the correct state for the
+						next yield. */
+						taskYIELD_IF_USING_PREEMPTION();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			taskEXIT_CRITICAL();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* INCLUDE_vTaskSuspend */
+
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_xTaskResumeFromISR == 1 ) && ( INCLUDE_vTaskSuspend == 1 ) )
+
+	BaseType_t xTaskResumeFromISR( TaskHandle_t xTaskToResume )
+	{
+	BaseType_t xYieldRequired = pdFALSE;
+	TCB_t * const pxTCB = ( TCB_t * ) xTaskToResume;
+	UBaseType_t uxSavedInterruptStatus;
+
+		configASSERT( xTaskToResume );
+
+		/* RTOS ports that support interrupt nesting have the concept of a
+		maximum	system call (or maximum API call) interrupt priority.
+		Interrupts that are	above the maximum system call priority are keep
+		permanently enabled, even when the RTOS kernel is in a critical section,
+		but cannot make any calls to FreeRTOS API functions.  If configASSERT()
+		is defined in FreeRTOSConfig.h then
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+		failure if a FreeRTOS API function is called from an interrupt that has
+		been assigned a priority above the configured maximum system call
+		priority.  Only FreeRTOS functions that end in FromISR can be called
+		from interrupts	that have been assigned a priority at or (logically)
+		below the maximum system call interrupt priority.  FreeRTOS maintains a
+		separate interrupt safe API to ensure interrupt entry is as fast and as
+		simple as possible.  More information (albeit Cortex-M specific) is
+		provided on the following link:
+		http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+		uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+		{
+			if( prvTaskIsTaskSuspended( pxTCB ) != pdFALSE )
+			{
+				traceTASK_RESUME_FROM_ISR( pxTCB );
+
+				/* Check the ready lists can be accessed. */
+				if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+				{
+					/* Ready lists can be accessed so move the task from the
+					suspended list to the ready list directly. */
+					if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+					{
+						xYieldRequired = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+					prvAddTaskToReadyList( pxTCB );
+				}
+				else
+				{
+					/* The delayed or ready lists cannot be accessed so the task
+					is held in the pending ready list until the scheduler is
+					unsuspended. */
+					vListInsertEnd( &( xPendingReadyList ), &( pxTCB->xEventListItem ) );
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+		return xYieldRequired;
+	}
+
+#endif /* ( ( INCLUDE_xTaskResumeFromISR == 1 ) && ( INCLUDE_vTaskSuspend == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+void vTaskStartScheduler( void )
+{
+BaseType_t xReturn;
+
+	/* Add the idle task at the lowest priority. */
+	#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+	{
+		StaticTask_t *pxIdleTaskTCBBuffer = NULL;
+		StackType_t *pxIdleTaskStackBuffer = NULL;
+		uint32_t ulIdleTaskStackSize;
+
+		/* The Idle task is created using user provided RAM - obtain the
+		address of the RAM then create the idle task. */
+		vApplicationGetIdleTaskMemory( &pxIdleTaskTCBBuffer, &pxIdleTaskStackBuffer, &ulIdleTaskStackSize );
+		xIdleTaskHandle = xTaskCreateStatic(	prvIdleTask,
+												"IDLE",
+												ulIdleTaskStackSize,
+												( void * ) NULL,
+												( tskIDLE_PRIORITY | portPRIVILEGE_BIT ),
+												pxIdleTaskStackBuffer,
+												pxIdleTaskTCBBuffer ); /*lint !e961 MISRA exception, justified as it is not a redundant explicit cast to all supported compilers. */
+
+		if( xIdleTaskHandle != NULL )
+		{
+			xReturn = pdPASS;
+		}
+		else
+		{
+			xReturn = pdFAIL;
+		}
+	}
+	#else
+	{
+		/* The Idle task is being created using dynamically allocated RAM. */
+		xReturn = xTaskCreate(	prvIdleTask,
+								"IDLE", configMINIMAL_STACK_SIZE,
+								( void * ) NULL,
+								( tskIDLE_PRIORITY | portPRIVILEGE_BIT ),
+								&xIdleTaskHandle ); /*lint !e961 MISRA exception, justified as it is not a redundant explicit cast to all supported compilers. */
+	}
+	#endif /* configSUPPORT_STATIC_ALLOCATION */
+
+	#if ( configUSE_TIMERS == 1 )
+	{
+		if( xReturn == pdPASS )
+		{
+			xReturn = xTimerCreateTimerTask();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	#endif /* configUSE_TIMERS */
+
+	if( xReturn == pdPASS )
+	{
+		/* Interrupts are turned off here, to ensure a tick does not occur
+		before or during the call to xPortStartScheduler().  The stacks of
+		the created tasks contain a status word with interrupts switched on
+		so interrupts will automatically get re-enabled when the first task
+		starts to run. */
+		portDISABLE_INTERRUPTS();
+
+		#if ( configUSE_NEWLIB_REENTRANT == 1 )
+		{
+			/* Switch Newlib's _impure_ptr variable to point to the _reent
+			structure specific to the task that will run first. */
+			_impure_ptr = &( pxCurrentTCB->xNewLib_reent );
+		}
+		#endif /* configUSE_NEWLIB_REENTRANT */
+
+		xNextTaskUnblockTime = portMAX_DELAY;
+		xSchedulerRunning = pdTRUE;
+		xTickCount = ( TickType_t ) 0U;
+
+		/* If configGENERATE_RUN_TIME_STATS is defined then the following
+		macro must be defined to configure the timer/counter used to generate
+		the run time counter time base. */
+		portCONFIGURE_TIMER_FOR_RUN_TIME_STATS();
+
+		/* Setting up the timer tick is hardware specific and thus in the
+		portable interface. */
+		if( xPortStartScheduler() != pdFALSE )
+		{
+			/* Should not reach here as if the scheduler is running the
+			function will not return. */
+		}
+		else
+		{
+			/* Should only reach here if a task calls xTaskEndScheduler(). */
+		}
+	}
+	else
+	{
+		/* This line will only be reached if the kernel could not be started,
+		because there was not enough FreeRTOS heap to create the idle task
+		or the timer task. */
+		configASSERT( xReturn != errCOULD_NOT_ALLOCATE_REQUIRED_MEMORY );
+	}
+
+	/* Prevent compiler warnings if INCLUDE_xTaskGetIdleTaskHandle is set to 0,
+	meaning xIdleTaskHandle is not used anywhere else. */
+	( void ) xIdleTaskHandle;
+}
+/*-----------------------------------------------------------*/
+
+void vTaskEndScheduler( void )
+{
+	/* Stop the scheduler interrupts and call the portable scheduler end
+	routine so the original ISRs can be restored if necessary.  The port
+	layer must ensure interrupts enable	bit is left in the correct state. */
+	portDISABLE_INTERRUPTS();
+	xSchedulerRunning = pdFALSE;
+	vPortEndScheduler();
+}
+/*----------------------------------------------------------*/
+
+void vTaskSuspendAll( void )
+{
+	/* A critical section is not required as the variable is of type
+	BaseType_t.  Please read Richard Barry's reply in the following link to a
+	post in the FreeRTOS support forum before reporting this as a bug! -
+	http://goo.gl/wu4acr */
+	++uxSchedulerSuspended;
+}
+/*----------------------------------------------------------*/
+
+#if ( configUSE_TICKLESS_IDLE != 0 )
+
+	static TickType_t prvGetExpectedIdleTime( void )
+	{
+	TickType_t xReturn;
+	UBaseType_t uxHigherPriorityReadyTasks = pdFALSE;
+
+		/* uxHigherPriorityReadyTasks takes care of the case where
+		configUSE_PREEMPTION is 0, so there may be tasks above the idle priority
+		task that are in the Ready state, even though the idle task is
+		running. */
+		#if( configUSE_PORT_OPTIMISED_TASK_SELECTION == 0 )
+		{
+			if( uxTopReadyPriority > tskIDLE_PRIORITY )
+			{
+				uxHigherPriorityReadyTasks = pdTRUE;
+			}
+		}
+		#else
+		{
+			const UBaseType_t uxLeastSignificantBit = ( UBaseType_t ) 0x01;
+
+			/* When port optimised task selection is used the uxTopReadyPriority
+			variable is used as a bit map.  If bits other than the least
+			significant bit are set then there are tasks that have a priority
+			above the idle priority that are in the Ready state.  This takes
+			care of the case where the co-operative scheduler is in use. */
+			if( uxTopReadyPriority > uxLeastSignificantBit )
+			{
+				uxHigherPriorityReadyTasks = pdTRUE;
+			}
+		}
+		#endif
+
+		if( pxCurrentTCB->uxPriority > tskIDLE_PRIORITY )
+		{
+			xReturn = 0;
+		}
+		else if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ tskIDLE_PRIORITY ] ) ) > 1 )
+		{
+			/* There are other idle priority tasks in the ready state.  If
+			time slicing is used then the very next tick interrupt must be
+			processed. */
+			xReturn = 0;
+		}
+		else if( uxHigherPriorityReadyTasks != pdFALSE )
+		{
+			/* There are tasks in the Ready state that have a priority above the
+			idle priority.  This path can only be reached if
+			configUSE_PREEMPTION is 0. */
+			xReturn = 0;
+		}
+		else
+		{
+			xReturn = xNextTaskUnblockTime - xTickCount;
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_TICKLESS_IDLE */
+/*----------------------------------------------------------*/
+
+BaseType_t xTaskResumeAll( void )
+{
+TCB_t *pxTCB = NULL;
+BaseType_t xAlreadyYielded = pdFALSE;
+
+	/* If uxSchedulerSuspended is zero then this function does not match a
+	previous call to vTaskSuspendAll(). */
+	configASSERT( uxSchedulerSuspended );
+
+	/* It is possible that an ISR caused a task to be removed from an event
+	list while the scheduler was suspended.  If this was the case then the
+	removed task will have been added to the xPendingReadyList.  Once the
+	scheduler has been resumed it is safe to move all the pending ready
+	tasks from this list into their appropriate ready list. */
+	taskENTER_CRITICAL();
+	{
+		--uxSchedulerSuspended;
+
+		if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+		{
+			if( uxCurrentNumberOfTasks > ( UBaseType_t ) 0U )
+			{
+				/* Move any readied tasks from the pending list into the
+				appropriate ready list. */
+				while( listLIST_IS_EMPTY( &xPendingReadyList ) == pdFALSE )
+				{
+					pxTCB = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( ( &xPendingReadyList ) );
+					( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+					( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+					prvAddTaskToReadyList( pxTCB );
+
+					/* If the moved task has a priority higher than the current
+					task then a yield must be performed. */
+					if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+					{
+						xYieldPending = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+
+				if( pxTCB != NULL )
+				{
+					/* A task was unblocked while the scheduler was suspended,
+					which may have prevented the next unblock time from being
+					re-calculated, in which case re-calculate it now.  Mainly
+					important for low power tickless implementations, where
+					this can prevent an unnecessary exit from low power
+					state. */
+					prvResetNextTaskUnblockTime();
+				}
+
+				/* If any ticks occurred while the scheduler was suspended then
+				they should be processed now.  This ensures the tick count does
+				not	slip, and that any delayed tasks are resumed at the correct
+				time. */
+				{
+					UBaseType_t uxPendedCounts = uxPendedTicks; /* Non-volatile copy. */
+
+					if( uxPendedCounts > ( UBaseType_t ) 0U )
+					{
+						do
+						{
+							if( xTaskIncrementTick() != pdFALSE )
+							{
+								xYieldPending = pdTRUE;
+							}
+							else
+							{
+								mtCOVERAGE_TEST_MARKER();
+							}
+							--uxPendedCounts;
+						} while( uxPendedCounts > ( UBaseType_t ) 0U );
+
+						uxPendedTicks = 0;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+
+				if( xYieldPending != pdFALSE )
+				{
+					#if( configUSE_PREEMPTION != 0 )
+					{
+						xAlreadyYielded = pdTRUE;
+					}
+					#endif
+					taskYIELD_IF_USING_PREEMPTION();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	return xAlreadyYielded;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTaskGetTickCount( void )
+{
+TickType_t xTicks;
+
+	/* Critical section required if running on a 16 bit processor. */
+	portTICK_TYPE_ENTER_CRITICAL();
+	{
+		xTicks = xTickCount;
+	}
+	portTICK_TYPE_EXIT_CRITICAL();
+
+	return xTicks;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTaskGetTickCountFromISR( void )
+{
+TickType_t xReturn;
+UBaseType_t uxSavedInterruptStatus;
+
+	/* RTOS ports that support interrupt nesting have the concept of a maximum
+	system call (or maximum API call) interrupt priority.  Interrupts that are
+	above the maximum system call priority are kept permanently enabled, even
+	when the RTOS kernel is in a critical section, but cannot make any calls to
+	FreeRTOS API functions.  If configASSERT() is defined in FreeRTOSConfig.h
+	then portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+	failure if a FreeRTOS API function is called from an interrupt that has been
+	assigned a priority above the configured maximum system call priority.
+	Only FreeRTOS functions that end in FromISR can be called from interrupts
+	that have been assigned a priority at or (logically) below the maximum
+	system call	interrupt priority.  FreeRTOS maintains a separate interrupt
+	safe API to ensure interrupt entry is as fast and as simple as possible.
+	More information (albeit Cortex-M specific) is provided on the following
+	link: http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+	portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+	uxSavedInterruptStatus = portTICK_TYPE_SET_INTERRUPT_MASK_FROM_ISR();
+	{
+		xReturn = xTickCount;
+	}
+	portTICK_TYPE_CLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+UBaseType_t uxTaskGetNumberOfTasks( void )
+{
+	/* A critical section is not required because the variables are of type
+	BaseType_t. */
+	return uxCurrentNumberOfTasks;
+}
+/*-----------------------------------------------------------*/
+
+char *pcTaskGetName( TaskHandle_t xTaskToQuery ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+{
+TCB_t *pxTCB;
+
+	/* If null is passed in here then the name of the calling task is being
+	queried. */
+	pxTCB = prvGetTCBFromHandle( xTaskToQuery );
+	configASSERT( pxTCB );
+	return &( pxTCB->pcTaskName[ 0 ] );
+}
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskGetHandle == 1 )
+
+	static TCB_t *prvSearchForNameWithinSingleList( List_t *pxList, const char pcNameToQuery[] )
+	{
+	TCB_t *pxNextTCB, *pxFirstTCB, *pxReturn = NULL;
+	UBaseType_t x;
+	char cNextChar;
+
+		/* This function is called with the scheduler suspended. */
+
+		if( listCURRENT_LIST_LENGTH( pxList ) > ( UBaseType_t ) 0 )
+		{
+			listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList );
+
+			do
+			{
+				listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList );
+
+				/* Check each character in the name looking for a match or
+				mismatch. */
+				for( x = ( UBaseType_t ) 0; x < ( UBaseType_t ) configMAX_TASK_NAME_LEN; x++ )
+				{
+					cNextChar = pxNextTCB->pcTaskName[ x ];
+
+					if( cNextChar != pcNameToQuery[ x ] )
+					{
+						/* Characters didn't match. */
+						break;
+					}
+					else if( cNextChar == 0x00 )
+					{
+						/* Both strings terminated, a match must have been
+						found. */
+						pxReturn = pxNextTCB;
+						break;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+
+				if( pxReturn != NULL )
+				{
+					/* The handle has been found. */
+					break;
+				}
+
+			} while( pxNextTCB != pxFirstTCB );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return pxReturn;
+	}
+
+#endif /* INCLUDE_xTaskGetHandle */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskGetHandle == 1 )
+
+	TaskHandle_t xTaskGetHandle( const char *pcNameToQuery ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	{
+	UBaseType_t uxQueue = configMAX_PRIORITIES;
+	TCB_t* pxTCB;
+
+		/* Task names will be truncated to configMAX_TASK_NAME_LEN - 1 bytes. */
+		configASSERT( strlen( pcNameToQuery ) < configMAX_TASK_NAME_LEN );
+
+		vTaskSuspendAll();
+		{
+			/* Search the ready lists. */
+			do
+			{
+				uxQueue--;
+				pxTCB = prvSearchForNameWithinSingleList( ( List_t * ) &( pxReadyTasksLists[ uxQueue ] ), pcNameToQuery );
+
+				if( pxTCB != NULL )
+				{
+					/* Found the handle. */
+					break;
+				}
+
+			} while( uxQueue > ( UBaseType_t ) tskIDLE_PRIORITY ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+			/* Search the delayed lists. */
+			if( pxTCB == NULL )
+			{
+				pxTCB = prvSearchForNameWithinSingleList( ( List_t * ) pxDelayedTaskList, pcNameToQuery );
+			}
+
+			if( pxTCB == NULL )
+			{
+				pxTCB = prvSearchForNameWithinSingleList( ( List_t * ) pxOverflowDelayedTaskList, pcNameToQuery );
+			}
+
+			#if ( INCLUDE_vTaskSuspend == 1 )
+			{
+				if( pxTCB == NULL )
+				{
+					/* Search the suspended list. */
+					pxTCB = prvSearchForNameWithinSingleList( &xSuspendedTaskList, pcNameToQuery );
+				}
+			}
+			#endif
+
+			#if( INCLUDE_vTaskDelete == 1 )
+			{
+				if( pxTCB == NULL )
+				{
+					/* Search the deleted list. */
+					pxTCB = prvSearchForNameWithinSingleList( &xTasksWaitingTermination, pcNameToQuery );
+				}
+			}
+			#endif
+		}
+		( void ) xTaskResumeAll();
+
+		return ( TaskHandle_t ) pxTCB;
+	}
+
+#endif /* INCLUDE_xTaskGetHandle */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	UBaseType_t uxTaskGetSystemState( TaskStatus_t * const pxTaskStatusArray, const UBaseType_t uxArraySize, uint32_t * const pulTotalRunTime )
+	{
+	UBaseType_t uxTask = 0, uxQueue = configMAX_PRIORITIES;
+
+		vTaskSuspendAll();
+		{
+			/* Is there a space in the array for each task in the system? */
+			if( uxArraySize >= uxCurrentNumberOfTasks )
+			{
+				/* Fill in an TaskStatus_t structure with information on each
+				task in the Ready state. */
+				do
+				{
+					uxQueue--;
+					uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), &( pxReadyTasksLists[ uxQueue ] ), eReady );
+
+				} while( uxQueue > ( UBaseType_t ) tskIDLE_PRIORITY ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+				/* Fill in an TaskStatus_t structure with information on each
+				task in the Blocked state. */
+				uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), ( List_t * ) pxDelayedTaskList, eBlocked );
+				uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), ( List_t * ) pxOverflowDelayedTaskList, eBlocked );
+
+				#if( INCLUDE_vTaskDelete == 1 )
+				{
+					/* Fill in an TaskStatus_t structure with information on
+					each task that has been deleted but not yet cleaned up. */
+					uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), &xTasksWaitingTermination, eDeleted );
+				}
+				#endif
+
+				#if ( INCLUDE_vTaskSuspend == 1 )
+				{
+					/* Fill in an TaskStatus_t structure with information on
+					each task in the Suspended state. */
+					uxTask += prvListTasksWithinSingleList( &( pxTaskStatusArray[ uxTask ] ), &xSuspendedTaskList, eSuspended );
+				}
+				#endif
+
+				#if ( configGENERATE_RUN_TIME_STATS == 1)
+				{
+					if( pulTotalRunTime != NULL )
+					{
+						#ifdef portALT_GET_RUN_TIME_COUNTER_VALUE
+							portALT_GET_RUN_TIME_COUNTER_VALUE( ( *pulTotalRunTime ) );
+						#else
+							*pulTotalRunTime = portGET_RUN_TIME_COUNTER_VALUE();
+						#endif
+					}
+				}
+				#else
+				{
+					if( pulTotalRunTime != NULL )
+					{
+						*pulTotalRunTime = 0;
+					}
+				}
+				#endif
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		( void ) xTaskResumeAll();
+
+		return uxTask;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskGetIdleTaskHandle == 1 )
+
+	TaskHandle_t xTaskGetIdleTaskHandle( void )
+	{
+		/* If xTaskGetIdleTaskHandle() is called before the scheduler has been
+		started, then xIdleTaskHandle will be NULL. */
+		configASSERT( ( xIdleTaskHandle != NULL ) );
+		return xIdleTaskHandle;
+	}
+
+#endif /* INCLUDE_xTaskGetIdleTaskHandle */
+/*----------------------------------------------------------*/
+
+/* This conditional compilation should use inequality to 0, not equality to 1.
+This is to ensure vTaskStepTick() is available when user defined low power mode
+implementations require configUSE_TICKLESS_IDLE to be set to a value other than
+1. */
+#if ( configUSE_TICKLESS_IDLE != 0 )
+
+	void vTaskStepTick( const TickType_t xTicksToJump )
+	{
+		/* Correct the tick count value after a period during which the tick
+		was suppressed.  Note this does *not* call the tick hook function for
+		each stepped tick. */
+		configASSERT( ( xTickCount + xTicksToJump ) <= xNextTaskUnblockTime );
+		xTickCount += xTicksToJump;
+		traceINCREASE_TICK_COUNT( xTicksToJump );
+	}
+
+#endif /* configUSE_TICKLESS_IDLE */
+/*----------------------------------------------------------*/
+
+#if ( INCLUDE_xTaskAbortDelay == 1 )
+
+	BaseType_t xTaskAbortDelay( TaskHandle_t xTask )
+	{
+	TCB_t *pxTCB = ( TCB_t * ) xTask;
+	BaseType_t xReturn = pdFALSE;
+
+		configASSERT( pxTCB );
+
+		vTaskSuspendAll();
+		{
+			/* A task can only be prematurely removed from the Blocked state if
+			it is actually in the Blocked state. */
+			if( eTaskGetState( xTask ) == eBlocked )
+			{
+				/* Remove the reference to the task from the blocked list.  An
+				interrupt won't touch the xStateListItem because the
+				scheduler is suspended. */
+				( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+
+				/* Is the task waiting on an event also?  If so remove it from
+				the event list too.  Interrupts can touch the event list item,
+				even though the scheduler is suspended, so a critical section
+				is used. */
+				taskENTER_CRITICAL();
+				{
+					if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+					{
+						( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+						pxTCB->ucDelayAborted = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				taskEXIT_CRITICAL();
+
+				/* Place the unblocked task into the appropriate ready list. */
+				prvAddTaskToReadyList( pxTCB );
+
+				/* A task being unblocked cannot cause an immediate context
+				switch if preemption is turned off. */
+				#if (  configUSE_PREEMPTION == 1 )
+				{
+					/* Preemption is on, but a context switch should only be
+					performed if the unblocked task has a priority that is
+					equal to or higher than the currently executing task. */
+					if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+					{
+						/* Pend the yield to be performed when the scheduler
+						is unsuspended. */
+						xYieldPending = pdTRUE;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				#endif /* configUSE_PREEMPTION */
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		xTaskResumeAll();
+
+		return xReturn;
+	}
+
+#endif /* INCLUDE_xTaskAbortDelay */
+/*----------------------------------------------------------*/
+
+BaseType_t xTaskIncrementTick( void )
+{
+TCB_t * pxTCB;
+TickType_t xItemValue;
+BaseType_t xSwitchRequired = pdFALSE;
+
+	/* Called by the portable layer each time a tick interrupt occurs.
+	Increments the tick then checks to see if the new tick value will cause any
+	tasks to be unblocked. */
+	traceTASK_INCREMENT_TICK( xTickCount );
+	if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+	{
+		/* Minor optimisation.  The tick count cannot change in this
+		block. */
+		const TickType_t xConstTickCount = xTickCount + 1;
+
+		/* Increment the RTOS tick, switching the delayed and overflowed
+		delayed lists if it wraps to 0. */
+		xTickCount = xConstTickCount;
+
+		if( xConstTickCount == ( TickType_t ) 0U )
+		{
+			taskSWITCH_DELAYED_LISTS();
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		/* See if this tick has made a timeout expire.  Tasks are stored in
+		the	queue in the order of their wake time - meaning once one task
+		has been found whose block time has not expired there is no need to
+		look any further down the list. */
+		if( xConstTickCount >= xNextTaskUnblockTime )
+		{
+			for( ;; )
+			{
+				if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE )
+				{
+					/* The delayed list is empty.  Set xNextTaskUnblockTime
+					to the maximum possible value so it is extremely
+					unlikely that the
+					if( xTickCount >= xNextTaskUnblockTime ) test will pass
+					next time through. */
+					xNextTaskUnblockTime = portMAX_DELAY; /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+					break;
+				}
+				else
+				{
+					/* The delayed list is not empty, get the value of the
+					item at the head of the delayed list.  This is the time
+					at which the task at the head of the delayed list must
+					be removed from the Blocked state. */
+					pxTCB = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList );
+					xItemValue = listGET_LIST_ITEM_VALUE( &( pxTCB->xStateListItem ) );
+
+					if( xConstTickCount < xItemValue )
+					{
+						/* It is not time to unblock this item yet, but the
+						item value is the time at which the task at the head
+						of the blocked list must be removed from the Blocked
+						state -	so record the item value in
+						xNextTaskUnblockTime. */
+						xNextTaskUnblockTime = xItemValue;
+						break;
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* It is time to remove the item from the Blocked state. */
+					( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+
+					/* Is the task waiting on an event also?  If so remove
+					it from the event list. */
+					if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+					{
+						( void ) uxListRemove( &( pxTCB->xEventListItem ) );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* Place the unblocked task into the appropriate ready
+					list. */
+					prvAddTaskToReadyList( pxTCB );
+
+					/* A task being unblocked cannot cause an immediate
+					context switch if preemption is turned off. */
+					#if (  configUSE_PREEMPTION == 1 )
+					{
+						/* Preemption is on, but a context switch should
+						only be performed if the unblocked task has a
+						priority that is equal to or higher than the
+						currently executing task. */
+						if( pxTCB->uxPriority >= pxCurrentTCB->uxPriority )
+						{
+							xSwitchRequired = pdTRUE;
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					#endif /* configUSE_PREEMPTION */
+				}
+			}
+		}
+
+		/* Tasks of equal priority to the currently running task will share
+		processing time (time slice) if preemption is on, and the application
+		writer has not explicitly turned time slicing off. */
+		#if ( ( configUSE_PREEMPTION == 1 ) && ( configUSE_TIME_SLICING == 1 ) )
+		{
+			if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ pxCurrentTCB->uxPriority ] ) ) > ( UBaseType_t ) 1 )
+			{
+				xSwitchRequired = pdTRUE;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* ( ( configUSE_PREEMPTION == 1 ) && ( configUSE_TIME_SLICING == 1 ) ) */
+
+		#if ( configUSE_TICK_HOOK == 1 )
+		{
+			/* Guard against the tick hook being called when the pended tick
+			count is being unwound (when the scheduler is being unlocked). */
+			if( uxPendedTicks == ( UBaseType_t ) 0U )
+			{
+				vApplicationTickHook();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* configUSE_TICK_HOOK */
+	}
+	else
+	{
+		++uxPendedTicks;
+
+		/* The tick hook gets called at regular intervals, even if the
+		scheduler is locked. */
+		#if ( configUSE_TICK_HOOK == 1 )
+		{
+			vApplicationTickHook();
+		}
+		#endif
+	}
+
+	#if ( configUSE_PREEMPTION == 1 )
+	{
+		if( xYieldPending != pdFALSE )
+		{
+			xSwitchRequired = pdTRUE;
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	#endif /* configUSE_PREEMPTION */
+
+	return xSwitchRequired;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+	void vTaskSetApplicationTaskTag( TaskHandle_t xTask, TaskHookFunction_t pxHookFunction )
+	{
+	TCB_t *xTCB;
+
+		/* If xTask is NULL then it is the task hook of the calling task that is
+		getting set. */
+		if( xTask == NULL )
+		{
+			xTCB = ( TCB_t * ) pxCurrentTCB;
+		}
+		else
+		{
+			xTCB = ( TCB_t * ) xTask;
+		}
+
+		/* Save the hook function in the TCB.  A critical section is required as
+		the value can be accessed from an interrupt. */
+		taskENTER_CRITICAL();
+			xTCB->pxTaskTag = pxHookFunction;
+		taskEXIT_CRITICAL();
+	}
+
+#endif /* configUSE_APPLICATION_TASK_TAG */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+	TaskHookFunction_t xTaskGetApplicationTaskTag( TaskHandle_t xTask )
+	{
+	TCB_t *xTCB;
+	TaskHookFunction_t xReturn;
+
+		/* If xTask is NULL then we are setting our own task hook. */
+		if( xTask == NULL )
+		{
+			xTCB = ( TCB_t * ) pxCurrentTCB;
+		}
+		else
+		{
+			xTCB = ( TCB_t * ) xTask;
+		}
+
+		/* Save the hook function in the TCB.  A critical section is required as
+		the value can be accessed from an interrupt. */
+		taskENTER_CRITICAL();
+		{
+			xReturn = xTCB->pxTaskTag;
+		}
+		taskEXIT_CRITICAL();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_APPLICATION_TASK_TAG */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_APPLICATION_TASK_TAG == 1 )
+
+	BaseType_t xTaskCallApplicationTaskHook( TaskHandle_t xTask, void *pvParameter )
+	{
+	TCB_t *xTCB;
+	BaseType_t xReturn;
+
+		/* If xTask is NULL then we are calling our own task hook. */
+		if( xTask == NULL )
+		{
+			xTCB = ( TCB_t * ) pxCurrentTCB;
+		}
+		else
+		{
+			xTCB = ( TCB_t * ) xTask;
+		}
+
+		if( xTCB->pxTaskTag != NULL )
+		{
+			xReturn = xTCB->pxTaskTag( pvParameter );
+		}
+		else
+		{
+			xReturn = pdFAIL;
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_APPLICATION_TASK_TAG */
+/*-----------------------------------------------------------*/
+
+void vTaskSwitchContext( void )
+{
+	if( uxSchedulerSuspended != ( UBaseType_t ) pdFALSE )
+	{
+		/* The scheduler is currently suspended - do not allow a context
+		switch. */
+		xYieldPending = pdTRUE;
+	}
+	else
+	{
+		xYieldPending = pdFALSE;
+		traceTASK_SWITCHED_OUT();
+
+		#if ( configGENERATE_RUN_TIME_STATS == 1 )
+		{
+				#ifdef portALT_GET_RUN_TIME_COUNTER_VALUE
+					portALT_GET_RUN_TIME_COUNTER_VALUE( ulTotalRunTime );
+				#else
+					ulTotalRunTime = portGET_RUN_TIME_COUNTER_VALUE();
+				#endif
+
+				/* Add the amount of time the task has been running to the
+				accumulated time so far.  The time the task started running was
+				stored in ulTaskSwitchedInTime.  Note that there is no overflow
+				protection here so count values are only valid until the timer
+				overflows.  The guard against negative values is to protect
+				against suspect run time stat counter implementations - which
+				are provided by the application, not the kernel. */
+				if( ulTotalRunTime > ulTaskSwitchedInTime )
+				{
+					pxCurrentTCB->ulRunTimeCounter += ( ulTotalRunTime - ulTaskSwitchedInTime );
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+				ulTaskSwitchedInTime = ulTotalRunTime;
+		}
+		#endif /* configGENERATE_RUN_TIME_STATS */
+
+		/* Check for stack overflow, if configured. */
+		taskCHECK_FOR_STACK_OVERFLOW();
+
+		/* Select a new task to run using either the generic C or port
+		optimised asm code. */
+		taskSELECT_HIGHEST_PRIORITY_TASK();
+		traceTASK_SWITCHED_IN();
+
+		#if ( configUSE_NEWLIB_REENTRANT == 1 )
+		{
+			/* Switch Newlib's _impure_ptr variable to point to the _reent
+			structure specific to this task. */
+			_impure_ptr = &( pxCurrentTCB->xNewLib_reent );
+		}
+		#endif /* configUSE_NEWLIB_REENTRANT */
+	}
+}
+/*-----------------------------------------------------------*/
+
+void vTaskPlaceOnEventList( List_t * const pxEventList, const TickType_t xTicksToWait )
+{
+	configASSERT( pxEventList );
+
+	/* THIS FUNCTION MUST BE CALLED WITH EITHER INTERRUPTS DISABLED OR THE
+	SCHEDULER SUSPENDED AND THE QUEUE BEING ACCESSED LOCKED. */
+
+	/* Place the event list item of the TCB in the appropriate event list.
+	This is placed in the list in priority order so the highest priority task
+	is the first to be woken by the event.  The queue that contains the event
+	list is locked, preventing simultaneous access from interrupts. */
+	vListInsert( pxEventList, &( pxCurrentTCB->xEventListItem ) );
+
+	prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+}
+/*-----------------------------------------------------------*/
+
+void vTaskPlaceOnUnorderedEventList( List_t * pxEventList, const TickType_t xItemValue, const TickType_t xTicksToWait )
+{
+	configASSERT( pxEventList );
+
+	/* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED.  It is used by
+	the event groups implementation. */
+	configASSERT( uxSchedulerSuspended != 0 );
+
+	/* Store the item value in the event list item.  It is safe to access the
+	event list item here as interrupts won't access the event list item of a
+	task that is not in the Blocked state. */
+	listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xEventListItem ), xItemValue | taskEVENT_LIST_ITEM_VALUE_IN_USE );
+
+	/* Place the event list item of the TCB at the end of the appropriate event
+	list.  It is safe to access the event list here because it is part of an
+	event group implementation - and interrupts don't access event groups
+	directly (instead they access them indirectly by pending function calls to
+	the task level). */
+	vListInsertEnd( pxEventList, &( pxCurrentTCB->xEventListItem ) );
+
+	prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TIMERS == 1 )
+
+	void vTaskPlaceOnEventListRestricted( List_t * const pxEventList, TickType_t xTicksToWait, const BaseType_t xWaitIndefinitely )
+	{
+		configASSERT( pxEventList );
+
+		/* This function should not be called by application code hence the
+		'Restricted' in its name.  It is not part of the public API.  It is
+		designed for use by kernel code, and has special calling requirements -
+		it should be called with the scheduler suspended. */
+
+
+		/* Place the event list item of the TCB in the appropriate event list.
+		In this case it is assume that this is the only task that is going to
+		be waiting on this event list, so the faster vListInsertEnd() function
+		can be used in place of vListInsert. */
+		vListInsertEnd( pxEventList, &( pxCurrentTCB->xEventListItem ) );
+
+		/* If the task should block indefinitely then set the block time to a
+		value that will be recognised as an indefinite delay inside the
+		prvAddCurrentTaskToDelayedList() function. */
+		if( xWaitIndefinitely != pdFALSE )
+		{
+			xTicksToWait = portMAX_DELAY;
+		}
+
+		traceTASK_DELAY_UNTIL( ( xTickCount + xTicksToWait ) );
+		prvAddCurrentTaskToDelayedList( xTicksToWait, xWaitIndefinitely );
+	}
+
+#endif /* configUSE_TIMERS */
+/*-----------------------------------------------------------*/
+
+BaseType_t xTaskRemoveFromEventList( const List_t * const pxEventList )
+{
+TCB_t *pxUnblockedTCB;
+BaseType_t xReturn;
+
+	/* THIS FUNCTION MUST BE CALLED FROM A CRITICAL SECTION.  It can also be
+	called from a critical section within an ISR. */
+
+	/* The event list is sorted in priority order, so the first in the list can
+	be removed as it is known to be the highest priority.  Remove the TCB from
+	the delayed list, and add it to the ready list.
+
+	If an event is for a queue that is locked then this function will never
+	get called - the lock count on the queue will get modified instead.  This
+	means exclusive access to the event list is guaranteed here.
+
+	This function assumes that a check has already been made to ensure that
+	pxEventList is not empty. */
+	pxUnblockedTCB = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxEventList );
+	configASSERT( pxUnblockedTCB );
+	( void ) uxListRemove( &( pxUnblockedTCB->xEventListItem ) );
+
+	if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+	{
+		( void ) uxListRemove( &( pxUnblockedTCB->xStateListItem ) );
+		prvAddTaskToReadyList( pxUnblockedTCB );
+	}
+	else
+	{
+		/* The delayed and ready lists cannot be accessed, so hold this task
+		pending until the scheduler is resumed. */
+		vListInsertEnd( &( xPendingReadyList ), &( pxUnblockedTCB->xEventListItem ) );
+	}
+
+	if( pxUnblockedTCB->uxPriority > pxCurrentTCB->uxPriority )
+	{
+		/* Return true if the task removed from the event list has a higher
+		priority than the calling task.  This allows the calling task to know if
+		it should force a context switch now. */
+		xReturn = pdTRUE;
+
+		/* Mark that a yield is pending in case the user is not using the
+		"xHigherPriorityTaskWoken" parameter to an ISR safe FreeRTOS function. */
+		xYieldPending = pdTRUE;
+	}
+	else
+	{
+		xReturn = pdFALSE;
+	}
+
+	#if( configUSE_TICKLESS_IDLE != 0 )
+	{
+		/* If a task is blocked on a kernel object then xNextTaskUnblockTime
+		might be set to the blocked task's time out time.  If the task is
+		unblocked for a reason other than a timeout xNextTaskUnblockTime is
+		normally left unchanged, because it is automatically reset to a new
+		value when the tick count equals xNextTaskUnblockTime.  However if
+		tickless idling is used it might be more important to enter sleep mode
+		at the earliest possible time - so reset xNextTaskUnblockTime here to
+		ensure it is updated at the earliest possible time. */
+		prvResetNextTaskUnblockTime();
+	}
+	#endif
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xTaskRemoveFromUnorderedEventList( ListItem_t * pxEventListItem, const TickType_t xItemValue )
+{
+TCB_t *pxUnblockedTCB;
+BaseType_t xReturn;
+
+	/* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED.  It is used by
+	the event flags implementation. */
+	configASSERT( uxSchedulerSuspended != pdFALSE );
+
+	/* Store the new item value in the event list. */
+	listSET_LIST_ITEM_VALUE( pxEventListItem, xItemValue | taskEVENT_LIST_ITEM_VALUE_IN_USE );
+
+	/* Remove the event list form the event flag.  Interrupts do not access
+	event flags. */
+	pxUnblockedTCB = ( TCB_t * ) listGET_LIST_ITEM_OWNER( pxEventListItem );
+	configASSERT( pxUnblockedTCB );
+	( void ) uxListRemove( pxEventListItem );
+
+	/* Remove the task from the delayed list and add it to the ready list.  The
+	scheduler is suspended so interrupts will not be accessing the ready
+	lists. */
+	( void ) uxListRemove( &( pxUnblockedTCB->xStateListItem ) );
+	prvAddTaskToReadyList( pxUnblockedTCB );
+
+	if( pxUnblockedTCB->uxPriority > pxCurrentTCB->uxPriority )
+	{
+		/* Return true if the task removed from the event list has
+		a higher priority than the calling task.  This allows
+		the calling task to know if it should force a context
+		switch now. */
+		xReturn = pdTRUE;
+
+		/* Mark that a yield is pending in case the user is not using the
+		"xHigherPriorityTaskWoken" parameter to an ISR safe FreeRTOS function. */
+		xYieldPending = pdTRUE;
+	}
+	else
+	{
+		xReturn = pdFALSE;
+	}
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vTaskSetTimeOutState( TimeOut_t * const pxTimeOut )
+{
+	configASSERT( pxTimeOut );
+	pxTimeOut->xOverflowCount = xNumOfOverflows;
+	pxTimeOut->xTimeOnEntering = xTickCount;
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xTaskCheckForTimeOut( TimeOut_t * const pxTimeOut, TickType_t * const pxTicksToWait )
+{
+BaseType_t xReturn;
+
+	configASSERT( pxTimeOut );
+	configASSERT( pxTicksToWait );
+
+	taskENTER_CRITICAL();
+	{
+		/* Minor optimisation.  The tick count cannot change in this block. */
+		const TickType_t xConstTickCount = xTickCount;
+
+		#if( INCLUDE_xTaskAbortDelay == 1 )
+			if( pxCurrentTCB->ucDelayAborted != pdFALSE )
+			{
+				/* The delay was aborted, which is not the same as a time out,
+				but has the same result. */
+				pxCurrentTCB->ucDelayAborted = pdFALSE;
+				xReturn = pdTRUE;
+			}
+			else
+		#endif
+
+		#if ( INCLUDE_vTaskSuspend == 1 )
+			if( *pxTicksToWait == portMAX_DELAY )
+			{
+				/* If INCLUDE_vTaskSuspend is set to 1 and the block time
+				specified is the maximum block time then the task should block
+				indefinitely, and therefore never time out. */
+				xReturn = pdFALSE;
+			}
+			else
+		#endif
+
+		if( ( xNumOfOverflows != pxTimeOut->xOverflowCount ) && ( xConstTickCount >= pxTimeOut->xTimeOnEntering ) ) /*lint !e525 Indentation preferred as is to make code within pre-processor directives clearer. */
+		{
+			/* The tick count is greater than the time at which
+			vTaskSetTimeout() was called, but has also overflowed since
+			vTaskSetTimeOut() was called.  It must have wrapped all the way
+			around and gone past again. This passed since vTaskSetTimeout()
+			was called. */
+			xReturn = pdTRUE;
+		}
+		else if( ( ( TickType_t ) ( xConstTickCount - pxTimeOut->xTimeOnEntering ) ) < *pxTicksToWait ) /*lint !e961 Explicit casting is only redundant with some compilers, whereas others require it to prevent integer conversion errors. */
+		{
+			/* Not a genuine timeout. Adjust parameters for time remaining. */
+			*pxTicksToWait -= ( xConstTickCount - pxTimeOut->xTimeOnEntering );
+			vTaskSetTimeOutState( pxTimeOut );
+			xReturn = pdFALSE;
+		}
+		else
+		{
+			xReturn = pdTRUE;
+		}
+	}
+	taskEXIT_CRITICAL();
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vTaskMissedYield( void )
+{
+	xYieldPending = pdTRUE;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	UBaseType_t uxTaskGetTaskNumber( TaskHandle_t xTask )
+	{
+	UBaseType_t uxReturn;
+	TCB_t *pxTCB;
+
+		if( xTask != NULL )
+		{
+			pxTCB = ( TCB_t * ) xTask;
+			uxReturn = pxTCB->uxTaskNumber;
+		}
+		else
+		{
+			uxReturn = 0U;
+		}
+
+		return uxReturn;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	void vTaskSetTaskNumber( TaskHandle_t xTask, const UBaseType_t uxHandle )
+	{
+	TCB_t *pxTCB;
+
+		if( xTask != NULL )
+		{
+			pxTCB = ( TCB_t * ) xTask;
+			pxTCB->uxTaskNumber = uxHandle;
+		}
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+
+/*
+ * -----------------------------------------------------------
+ * The Idle task.
+ * ----------------------------------------------------------
+ *
+ * The portTASK_FUNCTION() macro is used to allow port/compiler specific
+ * language extensions.  The equivalent prototype for this function is:
+ *
+ * void prvIdleTask( void *pvParameters );
+ *
+ */
+static portTASK_FUNCTION( prvIdleTask, pvParameters )
+{
+	/* Stop warnings. */
+	( void ) pvParameters;
+
+	/** THIS IS THE RTOS IDLE TASK - WHICH IS CREATED AUTOMATICALLY WHEN THE
+	SCHEDULER IS STARTED. **/
+
+	for( ;; )
+	{
+		/* See if any tasks have deleted themselves - if so then the idle task
+		is responsible for freeing the deleted task's TCB and stack. */
+		prvCheckTasksWaitingTermination();
+
+		#if ( configUSE_PREEMPTION == 0 )
+		{
+			/* If we are not using preemption we keep forcing a task switch to
+			see if any other task has become available.  If we are using
+			preemption we don't need to do this as any task becoming available
+			will automatically get the processor anyway. */
+			taskYIELD();
+		}
+		#endif /* configUSE_PREEMPTION */
+
+		#if ( ( configUSE_PREEMPTION == 1 ) && ( configIDLE_SHOULD_YIELD == 1 ) )
+		{
+			/* When using preemption tasks of equal priority will be
+			timesliced.  If a task that is sharing the idle priority is ready
+			to run then the idle task should yield before the end of the
+			timeslice.
+
+			A critical region is not required here as we are just reading from
+			the list, and an occasional incorrect value will not matter.  If
+			the ready list at the idle priority contains more than one task
+			then a task other than the idle task is ready to execute. */
+			if( listCURRENT_LIST_LENGTH( &( pxReadyTasksLists[ tskIDLE_PRIORITY ] ) ) > ( UBaseType_t ) 1 )
+			{
+				taskYIELD();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* ( ( configUSE_PREEMPTION == 1 ) && ( configIDLE_SHOULD_YIELD == 1 ) ) */
+
+		#if ( configUSE_IDLE_HOOK == 1 )
+		{
+			extern void vApplicationIdleHook( void );
+
+			/* Call the user defined function from within the idle task.  This
+			allows the application designer to add background functionality
+			without the overhead of a separate task.
+			NOTE: vApplicationIdleHook() MUST NOT, UNDER ANY CIRCUMSTANCES,
+			CALL A FUNCTION THAT MIGHT BLOCK. */
+			vApplicationIdleHook();
+		}
+		#endif /* configUSE_IDLE_HOOK */
+
+		/* This conditional compilation should use inequality to 0, not equality
+		to 1.  This is to ensure portSUPPRESS_TICKS_AND_SLEEP() is called when
+		user defined low power mode	implementations require
+		configUSE_TICKLESS_IDLE to be set to a value other than 1. */
+		#if ( configUSE_TICKLESS_IDLE != 0 )
+		{
+		TickType_t xExpectedIdleTime;
+
+			/* It is not desirable to suspend then resume the scheduler on
+			each iteration of the idle task.  Therefore, a preliminary
+			test of the expected idle time is performed without the
+			scheduler suspended.  The result here is not necessarily
+			valid. */
+			xExpectedIdleTime = prvGetExpectedIdleTime();
+
+			if( xExpectedIdleTime >= configEXPECTED_IDLE_TIME_BEFORE_SLEEP )
+			{
+				vTaskSuspendAll();
+				{
+					/* Now the scheduler is suspended, the expected idle
+					time can be sampled again, and this time its value can
+					be used. */
+					configASSERT( xNextTaskUnblockTime >= xTickCount );
+					xExpectedIdleTime = prvGetExpectedIdleTime();
+
+					if( xExpectedIdleTime >= configEXPECTED_IDLE_TIME_BEFORE_SLEEP )
+					{
+						traceLOW_POWER_IDLE_BEGIN();
+						portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime );
+						traceLOW_POWER_IDLE_END();
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+				}
+				( void ) xTaskResumeAll();
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* configUSE_TICKLESS_IDLE */
+	}
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TICKLESS_IDLE != 0 )
+
+	eSleepModeStatus eTaskConfirmSleepModeStatus( void )
+	{
+	/* The idle task exists in addition to the application tasks. */
+	const UBaseType_t uxNonApplicationTasks = 1;
+	eSleepModeStatus eReturn = eStandardSleep;
+
+		if( listCURRENT_LIST_LENGTH( &xPendingReadyList ) != 0 )
+		{
+			/* A task was made ready while the scheduler was suspended. */
+			eReturn = eAbortSleep;
+		}
+		else if( xYieldPending != pdFALSE )
+		{
+			/* A yield was pended while the scheduler was suspended. */
+			eReturn = eAbortSleep;
+		}
+		else
+		{
+			/* If all the tasks are in the suspended list (which might mean they
+			have an infinite block time rather than actually being suspended)
+			then it is safe to turn all clocks off and just wait for external
+			interrupts. */
+			if( listCURRENT_LIST_LENGTH( &xSuspendedTaskList ) == ( uxCurrentNumberOfTasks - uxNonApplicationTasks ) )
+			{
+				eReturn = eNoTasksWaitingTimeout;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+
+		return eReturn;
+	}
+
+#endif /* configUSE_TICKLESS_IDLE */
+/*-----------------------------------------------------------*/
+
+#if ( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )
+
+	void vTaskSetThreadLocalStoragePointer( TaskHandle_t xTaskToSet, BaseType_t xIndex, void *pvValue )
+	{
+	TCB_t *pxTCB;
+
+		if( xIndex < configNUM_THREAD_LOCAL_STORAGE_POINTERS )
+		{
+			pxTCB = prvGetTCBFromHandle( xTaskToSet );
+			pxTCB->pvThreadLocalStoragePointers[ xIndex ] = pvValue;
+		}
+	}
+
+#endif /* configNUM_THREAD_LOCAL_STORAGE_POINTERS */
+/*-----------------------------------------------------------*/
+
+#if ( configNUM_THREAD_LOCAL_STORAGE_POINTERS != 0 )
+
+	void *pvTaskGetThreadLocalStoragePointer( TaskHandle_t xTaskToQuery, BaseType_t xIndex )
+	{
+	void *pvReturn = NULL;
+	TCB_t *pxTCB;
+
+		if( xIndex < configNUM_THREAD_LOCAL_STORAGE_POINTERS )
+		{
+			pxTCB = prvGetTCBFromHandle( xTaskToQuery );
+			pvReturn = pxTCB->pvThreadLocalStoragePointers[ xIndex ];
+		}
+		else
+		{
+			pvReturn = NULL;
+		}
+
+		return pvReturn;
+	}
+
+#endif /* configNUM_THREAD_LOCAL_STORAGE_POINTERS */
+/*-----------------------------------------------------------*/
+
+#if ( portUSING_MPU_WRAPPERS == 1 )
+
+	void vTaskAllocateMPURegions( TaskHandle_t xTaskToModify, const MemoryRegion_t * const xRegions )
+	{
+	TCB_t *pxTCB;
+
+		/* If null is passed in here then we are modifying the MPU settings of
+		the calling task. */
+		pxTCB = prvGetTCBFromHandle( xTaskToModify );
+
+		vPortStoreTaskMPUSettings( &( pxTCB->xMPUSettings ), xRegions, NULL, 0 );
+	}
+
+#endif /* portUSING_MPU_WRAPPERS */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseTaskLists( void )
+{
+UBaseType_t uxPriority;
+
+	for( uxPriority = ( UBaseType_t ) 0U; uxPriority < ( UBaseType_t ) configMAX_PRIORITIES; uxPriority++ )
+	{
+		vListInitialise( &( pxReadyTasksLists[ uxPriority ] ) );
+	}
+
+	vListInitialise( &xDelayedTaskList1 );
+	vListInitialise( &xDelayedTaskList2 );
+	vListInitialise( &xPendingReadyList );
+
+	#if ( INCLUDE_vTaskDelete == 1 )
+	{
+		vListInitialise( &xTasksWaitingTermination );
+	}
+	#endif /* INCLUDE_vTaskDelete */
+
+	#if ( INCLUDE_vTaskSuspend == 1 )
+	{
+		vListInitialise( &xSuspendedTaskList );
+	}
+	#endif /* INCLUDE_vTaskSuspend */
+
+	/* Start with pxDelayedTaskList using list1 and the pxOverflowDelayedTaskList
+	using list2. */
+	pxDelayedTaskList = &xDelayedTaskList1;
+	pxOverflowDelayedTaskList = &xDelayedTaskList2;
+}
+/*-----------------------------------------------------------*/
+
+static void prvCheckTasksWaitingTermination( void )
+{
+
+	/** THIS FUNCTION IS CALLED FROM THE RTOS IDLE TASK **/
+
+	#if ( INCLUDE_vTaskDelete == 1 )
+	{
+		BaseType_t xListIsEmpty;
+
+		/* ucTasksDeleted is used to prevent vTaskSuspendAll() being called
+		too often in the idle task. */
+		while( uxDeletedTasksWaitingCleanUp > ( UBaseType_t ) 0U )
+		{
+			vTaskSuspendAll();
+			{
+				xListIsEmpty = listLIST_IS_EMPTY( &xTasksWaitingTermination );
+			}
+			( void ) xTaskResumeAll();
+
+			if( xListIsEmpty == pdFALSE )
+			{
+				TCB_t *pxTCB;
+
+				taskENTER_CRITICAL();
+				{
+					pxTCB = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( ( &xTasksWaitingTermination ) );
+					( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+					--uxCurrentNumberOfTasks;
+					--uxDeletedTasksWaitingCleanUp;
+				}
+				taskEXIT_CRITICAL();
+
+				prvDeleteTCB( pxTCB );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+	}
+	#endif /* INCLUDE_vTaskDelete */
+}
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TRACE_FACILITY == 1 )
+
+	void vTaskGetInfo( TaskHandle_t xTask, TaskStatus_t *pxTaskStatus, BaseType_t xGetFreeStackSpace, eTaskState eState )
+	{
+	TCB_t *pxTCB;
+
+		/* xTask is NULL then get the state of the calling task. */
+		pxTCB = prvGetTCBFromHandle( xTask );
+
+		pxTaskStatus->xHandle = ( TaskHandle_t ) pxTCB;
+		pxTaskStatus->pcTaskName = ( const char * ) &( pxTCB->pcTaskName [ 0 ] );
+		pxTaskStatus->uxCurrentPriority = pxTCB->uxPriority;
+		pxTaskStatus->pxStackBase = pxTCB->pxStack;
+		pxTaskStatus->xTaskNumber = pxTCB->uxTCBNumber;
+
+		#if ( INCLUDE_vTaskSuspend == 1 )
+		{
+			/* If the task is in the suspended list then there is a chance it is
+			actually just blocked indefinitely - so really it should be reported as
+			being in the Blocked state. */
+			if( pxTaskStatus->eCurrentState == eSuspended )
+			{
+				vTaskSuspendAll();
+				{
+					if( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) != NULL )
+					{
+						pxTaskStatus->eCurrentState = eBlocked;
+					}
+				}
+				xTaskResumeAll();
+			}
+		}
+		#endif /* INCLUDE_vTaskSuspend */
+
+		#if ( configUSE_MUTEXES == 1 )
+		{
+			pxTaskStatus->uxBasePriority = pxTCB->uxBasePriority;
+		}
+		#else
+		{
+			pxTaskStatus->uxBasePriority = 0;
+		}
+		#endif
+
+		#if ( configGENERATE_RUN_TIME_STATS == 1 )
+		{
+			pxTaskStatus->ulRunTimeCounter = pxTCB->ulRunTimeCounter;
+		}
+		#else
+		{
+			pxTaskStatus->ulRunTimeCounter = 0;
+		}
+		#endif
+
+		/* Obtaining the task state is a little fiddly, so is only done if the value
+		of eState passed into this function is eInvalid - otherwise the state is
+		just set to whatever is passed in. */
+		if( eState != eInvalid )
+		{
+			pxTaskStatus->eCurrentState = eState;
+		}
+		else
+		{
+			pxTaskStatus->eCurrentState = eTaskGetState( xTask );
+		}
+
+		/* Obtaining the stack space takes some time, so the xGetFreeStackSpace
+		parameter is provided to allow it to be skipped. */
+		if( xGetFreeStackSpace != pdFALSE )
+		{
+			#if ( portSTACK_GROWTH > 0 )
+			{
+				pxTaskStatus->usStackHighWaterMark = prvTaskCheckFreeStackSpace( ( uint8_t * ) pxTCB->pxEndOfStack );
+			}
+			#else
+			{
+				pxTaskStatus->usStackHighWaterMark = prvTaskCheckFreeStackSpace( ( uint8_t * ) pxTCB->pxStack );
+			}
+			#endif
+		}
+		else
+		{
+			pxTaskStatus->usStackHighWaterMark = 0;
+		}
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_TRACE_FACILITY == 1 )
+
+	static UBaseType_t prvListTasksWithinSingleList( TaskStatus_t *pxTaskStatusArray, List_t *pxList, eTaskState eState )
+	{
+	volatile TCB_t *pxNextTCB, *pxFirstTCB;
+	UBaseType_t uxTask = 0;
+
+		if( listCURRENT_LIST_LENGTH( pxList ) > ( UBaseType_t ) 0 )
+		{
+			listGET_OWNER_OF_NEXT_ENTRY( pxFirstTCB, pxList );
+
+			/* Populate an TaskStatus_t structure within the
+			pxTaskStatusArray array for each task that is referenced from
+			pxList.  See the definition of TaskStatus_t in task.h for the
+			meaning of each TaskStatus_t structure member. */
+			do
+			{
+				listGET_OWNER_OF_NEXT_ENTRY( pxNextTCB, pxList );
+				vTaskGetInfo( ( TaskHandle_t ) pxNextTCB, &( pxTaskStatusArray[ uxTask ] ), pdTRUE, eState );
+				uxTask++;
+			} while( pxNextTCB != pxFirstTCB );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return uxTask;
+	}
+
+#endif /* configUSE_TRACE_FACILITY */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) )
+
+	static uint16_t prvTaskCheckFreeStackSpace( const uint8_t * pucStackByte )
+	{
+	uint32_t ulCount = 0U;
+
+		while( *pucStackByte == ( uint8_t ) tskSTACK_FILL_BYTE )
+		{
+			pucStackByte -= portSTACK_GROWTH;
+			ulCount++;
+		}
+
+		ulCount /= ( uint32_t ) sizeof( StackType_t ); /*lint !e961 Casting is not redundant on smaller architectures. */
+
+		return ( uint16_t ) ulCount;
+	}
+
+#endif /* ( ( configUSE_TRACE_FACILITY == 1 ) || ( INCLUDE_uxTaskGetStackHighWaterMark == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_uxTaskGetStackHighWaterMark == 1 )
+
+	UBaseType_t uxTaskGetStackHighWaterMark( TaskHandle_t xTask )
+	{
+	TCB_t *pxTCB;
+	uint8_t *pucEndOfStack;
+	UBaseType_t uxReturn;
+
+		pxTCB = prvGetTCBFromHandle( xTask );
+
+		#if portSTACK_GROWTH < 0
+		{
+			pucEndOfStack = ( uint8_t * ) pxTCB->pxStack;
+		}
+		#else
+		{
+			pucEndOfStack = ( uint8_t * ) pxTCB->pxEndOfStack;
+		}
+		#endif
+
+		uxReturn = ( UBaseType_t ) prvTaskCheckFreeStackSpace( pucEndOfStack );
+
+		return uxReturn;
+	}
+
+#endif /* INCLUDE_uxTaskGetStackHighWaterMark */
+/*-----------------------------------------------------------*/
+
+#if ( INCLUDE_vTaskDelete == 1 )
+
+	static void prvDeleteTCB( TCB_t *pxTCB )
+	{
+		/* This call is required specifically for the TriCore port.  It must be
+		above the vPortFree() calls.  The call is also used by ports/demos that
+		want to allocate and clean RAM statically. */
+		portCLEAN_UP_TCB( pxTCB );
+
+		/* Free up the memory allocated by the scheduler for the task.  It is up
+		to the task to free any memory allocated at the application level. */
+		#if ( configUSE_NEWLIB_REENTRANT == 1 )
+		{
+			_reclaim_reent( &( pxTCB->xNewLib_reent ) );
+		}
+		#endif /* configUSE_NEWLIB_REENTRANT */
+
+		#if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) && ( portUSING_MPU_WRAPPERS == 0 ) )
+		{
+			/* The task can only have been allocated dynamically - free both
+			the stack and TCB. */
+			vPortFree( pxTCB->pxStack );
+			vPortFree( pxTCB );
+		}
+		#elif( tskSTATIC_AND_DYNAMIC_ALLOCATION_POSSIBLE == 1 )
+		{
+			/* The task could have been allocated statically or dynamically, so
+			check what was statically allocated before trying to free the
+			memory. */
+			if( pxTCB->ucStaticallyAllocated == tskDYNAMICALLY_ALLOCATED_STACK_AND_TCB )
+			{
+				/* Both the stack and TCB were allocated dynamically, so both
+				must be freed. */
+				vPortFree( pxTCB->pxStack );
+				vPortFree( pxTCB );
+			}
+			else if( pxTCB->ucStaticallyAllocated == tskSTATICALLY_ALLOCATED_STACK_ONLY )
+			{
+				/* Only the stack was statically allocated, so the TCB is the
+				only memory that must be freed. */
+				vPortFree( pxTCB );
+			}
+			else
+			{
+				/* Neither the stack nor the TCB were allocated dynamically, so
+				nothing needs to be freed. */
+				configASSERT( pxTCB->ucStaticallyAllocated == tskSTATICALLY_ALLOCATED_STACK_AND_TCB	)
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+	}
+
+#endif /* INCLUDE_vTaskDelete */
+/*-----------------------------------------------------------*/
+
+static void prvResetNextTaskUnblockTime( void )
+{
+TCB_t *pxTCB;
+
+	if( listLIST_IS_EMPTY( pxDelayedTaskList ) != pdFALSE )
+	{
+		/* The new current delayed list is empty.  Set xNextTaskUnblockTime to
+		the maximum possible value so it is	extremely unlikely that the
+		if( xTickCount >= xNextTaskUnblockTime ) test will pass until
+		there is an item in the delayed list. */
+		xNextTaskUnblockTime = portMAX_DELAY;
+	}
+	else
+	{
+		/* The new current delayed list is not empty, get the value of
+		the item at the head of the delayed list.  This is the time at
+		which the task at the head of the delayed list should be removed
+		from the Blocked state. */
+		( pxTCB ) = ( TCB_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedTaskList );
+		xNextTaskUnblockTime = listGET_LIST_ITEM_VALUE( &( ( pxTCB )->xStateListItem ) );
+	}
+}
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_xTaskGetCurrentTaskHandle == 1 ) || ( configUSE_MUTEXES == 1 ) )
+
+	TaskHandle_t xTaskGetCurrentTaskHandle( void )
+	{
+	TaskHandle_t xReturn;
+
+		/* A critical section is not required as this is not called from
+		an interrupt and the current TCB will always be the same for any
+		individual execution thread. */
+		xReturn = pxCurrentTCB;
+
+		return xReturn;
+	}
+
+#endif /* ( ( INCLUDE_xTaskGetCurrentTaskHandle == 1 ) || ( configUSE_MUTEXES == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
+
+	BaseType_t xTaskGetSchedulerState( void )
+	{
+	BaseType_t xReturn;
+
+		if( xSchedulerRunning == pdFALSE )
+		{
+			xReturn = taskSCHEDULER_NOT_STARTED;
+		}
+		else
+		{
+			if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+			{
+				xReturn = taskSCHEDULER_RUNNING;
+			}
+			else
+			{
+				xReturn = taskSCHEDULER_SUSPENDED;
+			}
+		}
+
+		return xReturn;
+	}
+
+#endif /* ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) ) */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+	void vTaskPriorityInherit( TaskHandle_t const pxMutexHolder )
+	{
+	TCB_t * const pxTCB = ( TCB_t * ) pxMutexHolder;
+
+		/* If the mutex was given back by an interrupt while the queue was
+		locked then the mutex holder might now be NULL. */
+		if( pxMutexHolder != NULL )
+		{
+			/* If the holder of the mutex has a priority below the priority of
+			the task attempting to obtain the mutex then it will temporarily
+			inherit the priority of the task attempting to obtain the mutex. */
+			if( pxTCB->uxPriority < pxCurrentTCB->uxPriority )
+			{
+				/* Adjust the mutex holder state to account for its new
+				priority.  Only reset the event list item value if the value is
+				not	being used for anything else. */
+				if( ( listGET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ) ) & taskEVENT_LIST_ITEM_VALUE_IN_USE ) == 0UL )
+				{
+					listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) pxCurrentTCB->uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+
+				/* If the task being modified is in the ready state it will need
+				to be moved into a new list. */
+				if( listIS_CONTAINED_WITHIN( &( pxReadyTasksLists[ pxTCB->uxPriority ] ), &( pxTCB->xStateListItem ) ) != pdFALSE )
+				{
+					if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+					{
+						taskRESET_READY_PRIORITY( pxTCB->uxPriority );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* Inherit the priority before being moved into the new list. */
+					pxTCB->uxPriority = pxCurrentTCB->uxPriority;
+					prvAddTaskToReadyList( pxTCB );
+				}
+				else
+				{
+					/* Just inherit the priority. */
+					pxTCB->uxPriority = pxCurrentTCB->uxPriority;
+				}
+
+				traceTASK_PRIORITY_INHERIT( pxTCB, pxCurrentTCB->uxPriority );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+	BaseType_t xTaskPriorityDisinherit( TaskHandle_t const pxMutexHolder )
+	{
+	TCB_t * const pxTCB = ( TCB_t * ) pxMutexHolder;
+	BaseType_t xReturn = pdFALSE;
+
+		if( pxMutexHolder != NULL )
+		{
+			/* A task can only have an inherited priority if it holds the mutex.
+			If the mutex is held by a task then it cannot be given from an
+			interrupt, and if a mutex is given by the holding task then it must
+			be the running state task. */
+			configASSERT( pxTCB == pxCurrentTCB );
+
+			configASSERT( pxTCB->uxMutexesHeld );
+			( pxTCB->uxMutexesHeld )--;
+
+			/* Has the holder of the mutex inherited the priority of another
+			task? */
+			if( pxTCB->uxPriority != pxTCB->uxBasePriority )
+			{
+				/* Only disinherit if no other mutexes are held. */
+				if( pxTCB->uxMutexesHeld == ( UBaseType_t ) 0 )
+				{
+					/* A task can only have an inherited priority if it holds
+					the mutex.  If the mutex is held by a task then it cannot be
+					given from an interrupt, and if a mutex is given by the
+					holding	task then it must be the running state task.  Remove
+					the	holding task from the ready	list. */
+					if( uxListRemove( &( pxTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+					{
+						taskRESET_READY_PRIORITY( pxTCB->uxPriority );
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+
+					/* Disinherit the priority before adding the task into the
+					new	ready list. */
+					traceTASK_PRIORITY_DISINHERIT( pxTCB, pxTCB->uxBasePriority );
+					pxTCB->uxPriority = pxTCB->uxBasePriority;
+
+					/* Reset the event list item value.  It cannot be in use for
+					any other purpose if this task is running, and it must be
+					running to give back the mutex. */
+					listSET_LIST_ITEM_VALUE( &( pxTCB->xEventListItem ), ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) pxTCB->uxPriority ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+					prvAddTaskToReadyList( pxTCB );
+
+					/* Return true to indicate that a context switch is required.
+					This is only actually required in the corner case whereby
+					multiple mutexes were held and the mutexes were given back
+					in an order different to that in which they were taken.
+					If a context switch did not occur when the first mutex was
+					returned, even if a task was waiting on it, then a context
+					switch should occur when the last mutex is returned whether
+					a task is waiting on it or not. */
+					xReturn = pdTRUE;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+
+		return xReturn;
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+
+	void vTaskEnterCritical( void )
+	{
+		portDISABLE_INTERRUPTS();
+
+		if( xSchedulerRunning != pdFALSE )
+		{
+			( pxCurrentTCB->uxCriticalNesting )++;
+
+			/* This is not the interrupt safe version of the enter critical
+			function so	assert() if it is being called from an interrupt
+			context.  Only API functions that end in "FromISR" can be used in an
+			interrupt.  Only assert if the critical nesting count is 1 to
+			protect against recursive calls if the assert function also uses a
+			critical section. */
+			if( pxCurrentTCB->uxCriticalNesting == 1 )
+			{
+				portASSERT_IF_IN_ISR();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* portCRITICAL_NESTING_IN_TCB */
+/*-----------------------------------------------------------*/
+
+#if ( portCRITICAL_NESTING_IN_TCB == 1 )
+
+	void vTaskExitCritical( void )
+	{
+		if( xSchedulerRunning != pdFALSE )
+		{
+			if( pxCurrentTCB->uxCriticalNesting > 0U )
+			{
+				( pxCurrentTCB->uxCriticalNesting )--;
+
+				if( pxCurrentTCB->uxCriticalNesting == 0U )
+				{
+					portENABLE_INTERRUPTS();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* portCRITICAL_NESTING_IN_TCB */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )
+
+	static char *prvWriteNameToBuffer( char *pcBuffer, const char *pcTaskName )
+	{
+	size_t x;
+
+		/* Start by copying the entire string. */
+		strcpy( pcBuffer, pcTaskName );
+
+		/* Pad the end of the string with spaces to ensure columns line up when
+		printed out. */
+		for( x = strlen( pcBuffer ); x < ( size_t ) ( configMAX_TASK_NAME_LEN - 1 ); x++ )
+		{
+			pcBuffer[ x ] = ' ';
+		}
+
+		/* Terminate. */
+		pcBuffer[ x ] = 0x00;
+
+		/* Return the new end of string. */
+		return &( pcBuffer[ x ] );
+	}
+
+#endif /* ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) */
+/*-----------------------------------------------------------*/
+
+#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )
+
+	void vTaskList( char * pcWriteBuffer )
+	{
+	TaskStatus_t *pxTaskStatusArray;
+	volatile UBaseType_t uxArraySize, x;
+	char cStatus;
+
+		/*
+		 * PLEASE NOTE:
+		 *
+		 * This function is provided for convenience only, and is used by many
+		 * of the demo applications.  Do not consider it to be part of the
+		 * scheduler.
+		 *
+		 * vTaskList() calls uxTaskGetSystemState(), then formats part of the
+		 * uxTaskGetSystemState() output into a human readable table that
+		 * displays task names, states and stack usage.
+		 *
+		 * vTaskList() has a dependency on the sprintf() C library function that
+		 * might bloat the code size, use a lot of stack, and provide different
+		 * results on different platforms.  An alternative, tiny, third party,
+		 * and limited functionality implementation of sprintf() is provided in
+		 * many of the FreeRTOS/Demo sub-directories in a file called
+		 * printf-stdarg.c (note printf-stdarg.c does not provide a full
+		 * snprintf() implementation!).
+		 *
+		 * It is recommended that production systems call uxTaskGetSystemState()
+		 * directly to get access to raw stats data, rather than indirectly
+		 * through a call to vTaskList().
+		 */
+
+
+		/* Make sure the write buffer does not contain a string. */
+		*pcWriteBuffer = 0x00;
+
+		/* Take a snapshot of the number of tasks in case it changes while this
+		function is executing. */
+		uxArraySize = uxCurrentNumberOfTasks;
+
+		/* Allocate an array index for each task.  NOTE!  if
+		configSUPPORT_DYNAMIC_ALLOCATION is set to 0 then pvPortMalloc() will
+		equate to NULL. */
+		pxTaskStatusArray = pvPortMalloc( uxCurrentNumberOfTasks * sizeof( TaskStatus_t ) );
+
+		if( pxTaskStatusArray != NULL )
+		{
+			/* Generate the (binary) data. */
+			uxArraySize = uxTaskGetSystemState( pxTaskStatusArray, uxArraySize, NULL );
+
+			/* Create a human readable table from the binary data. */
+			for( x = 0; x < uxArraySize; x++ )
+			{
+				switch( pxTaskStatusArray[ x ].eCurrentState )
+				{
+					case eReady:		cStatus = tskREADY_CHAR;
+										break;
+
+					case eBlocked:		cStatus = tskBLOCKED_CHAR;
+										break;
+
+					case eSuspended:	cStatus = tskSUSPENDED_CHAR;
+										break;
+
+					case eDeleted:		cStatus = tskDELETED_CHAR;
+										break;
+
+					default:			/* Should not get here, but it is included
+										to prevent static checking errors. */
+										cStatus = 0x00;
+										break;
+				}
+
+				/* Write the task name to the string, padding with spaces so it
+				can be printed in tabular form more easily. */
+				pcWriteBuffer = prvWriteNameToBuffer( pcWriteBuffer, pxTaskStatusArray[ x ].pcTaskName );
+
+				/* Write the rest of the string. */
+				sprintf( pcWriteBuffer, "\t%c\t%u\t%u\t%u\r\n", cStatus, ( unsigned int ) pxTaskStatusArray[ x ].uxCurrentPriority, ( unsigned int ) pxTaskStatusArray[ x ].usStackHighWaterMark, ( unsigned int ) pxTaskStatusArray[ x ].xTaskNumber );
+				pcWriteBuffer += strlen( pcWriteBuffer );
+			}
+
+			/* Free the array again.  NOTE!  If configSUPPORT_DYNAMIC_ALLOCATION
+			is 0 then vPortFree() will be #defined to nothing. */
+			vPortFree( pxTaskStatusArray );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) ) */
+/*----------------------------------------------------------*/
+
+#if ( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) )
+
+	void vTaskGetRunTimeStats( char *pcWriteBuffer )
+	{
+	TaskStatus_t *pxTaskStatusArray;
+	volatile UBaseType_t uxArraySize, x;
+	uint32_t ulTotalTime, ulStatsAsPercentage;
+
+		#if( configUSE_TRACE_FACILITY != 1 )
+		{
+			#error configUSE_TRACE_FACILITY must also be set to 1 in FreeRTOSConfig.h to use vTaskGetRunTimeStats().
+		}
+		#endif
+
+		/*
+		 * PLEASE NOTE:
+		 *
+		 * This function is provided for convenience only, and is used by many
+		 * of the demo applications.  Do not consider it to be part of the
+		 * scheduler.
+		 *
+		 * vTaskGetRunTimeStats() calls uxTaskGetSystemState(), then formats part
+		 * of the uxTaskGetSystemState() output into a human readable table that
+		 * displays the amount of time each task has spent in the Running state
+		 * in both absolute and percentage terms.
+		 *
+		 * vTaskGetRunTimeStats() has a dependency on the sprintf() C library
+		 * function that might bloat the code size, use a lot of stack, and
+		 * provide different results on different platforms.  An alternative,
+		 * tiny, third party, and limited functionality implementation of
+		 * sprintf() is provided in many of the FreeRTOS/Demo sub-directories in
+		 * a file called printf-stdarg.c (note printf-stdarg.c does not provide
+		 * a full snprintf() implementation!).
+		 *
+		 * It is recommended that production systems call uxTaskGetSystemState()
+		 * directly to get access to raw stats data, rather than indirectly
+		 * through a call to vTaskGetRunTimeStats().
+		 */
+
+		/* Make sure the write buffer does not contain a string. */
+		*pcWriteBuffer = 0x00;
+
+		/* Take a snapshot of the number of tasks in case it changes while this
+		function is executing. */
+		uxArraySize = uxCurrentNumberOfTasks;
+
+		/* Allocate an array index for each task.  NOTE!  If
+		configSUPPORT_DYNAMIC_ALLOCATION is set to 0 then pvPortMalloc() will
+		equate to NULL. */
+		pxTaskStatusArray = pvPortMalloc( uxCurrentNumberOfTasks * sizeof( TaskStatus_t ) );
+
+		if( pxTaskStatusArray != NULL )
+		{
+			/* Generate the (binary) data. */
+			uxArraySize = uxTaskGetSystemState( pxTaskStatusArray, uxArraySize, &ulTotalTime );
+
+			/* For percentage calculations. */
+			ulTotalTime /= 100UL;
+
+			/* Avoid divide by zero errors. */
+			if( ulTotalTime > 0 )
+			{
+				/* Create a human readable table from the binary data. */
+				for( x = 0; x < uxArraySize; x++ )
+				{
+					/* What percentage of the total run time has the task used?
+					This will always be rounded down to the nearest integer.
+					ulTotalRunTimeDiv100 has already been divided by 100. */
+					ulStatsAsPercentage = pxTaskStatusArray[ x ].ulRunTimeCounter / ulTotalTime;
+
+					/* Write the task name to the string, padding with
+					spaces so it can be printed in tabular form more
+					easily. */
+					pcWriteBuffer = prvWriteNameToBuffer( pcWriteBuffer, pxTaskStatusArray[ x ].pcTaskName );
+
+					if( ulStatsAsPercentage > 0UL )
+					{
+						#ifdef portLU_PRINTF_SPECIFIER_REQUIRED
+						{
+							sprintf( pcWriteBuffer, "\t%lu\t\t%lu%%\r\n", pxTaskStatusArray[ x ].ulRunTimeCounter, ulStatsAsPercentage );
+						}
+						#else
+						{
+							/* sizeof( int ) == sizeof( long ) so a smaller
+							printf() library can be used. */
+							sprintf( pcWriteBuffer, "\t%u\t\t%u%%\r\n", ( unsigned int ) pxTaskStatusArray[ x ].ulRunTimeCounter, ( unsigned int ) ulStatsAsPercentage );
+						}
+						#endif
+					}
+					else
+					{
+						/* If the percentage is zero here then the task has
+						consumed less than 1% of the total run time. */
+						#ifdef portLU_PRINTF_SPECIFIER_REQUIRED
+						{
+							sprintf( pcWriteBuffer, "\t%lu\t\t<1%%\r\n", pxTaskStatusArray[ x ].ulRunTimeCounter );
+						}
+						#else
+						{
+							/* sizeof( int ) == sizeof( long ) so a smaller
+							printf() library can be used. */
+							sprintf( pcWriteBuffer, "\t%u\t\t<1%%\r\n", ( unsigned int ) pxTaskStatusArray[ x ].ulRunTimeCounter );
+						}
+						#endif
+					}
+
+					pcWriteBuffer += strlen( pcWriteBuffer );
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			/* Free the array again.  NOTE!  If configSUPPORT_DYNAMIC_ALLOCATION
+			is 0 then vPortFree() will be #defined to nothing. */
+			vPortFree( pxTaskStatusArray );
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+#endif /* ( ( configGENERATE_RUN_TIME_STATS == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS > 0 ) ) */
+/*-----------------------------------------------------------*/
+
+TickType_t uxTaskResetEventItemValue( void )
+{
+TickType_t uxReturn;
+
+	uxReturn = listGET_LIST_ITEM_VALUE( &( pxCurrentTCB->xEventListItem ) );
+
+	/* Reset the event list item to its normal value - so it can be used with
+	queues and semaphores. */
+	listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xEventListItem ), ( ( TickType_t ) configMAX_PRIORITIES - ( TickType_t ) pxCurrentTCB->uxPriority ) ); /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+
+	return uxReturn;
+}
+/*-----------------------------------------------------------*/
+
+#if ( configUSE_MUTEXES == 1 )
+
+	void *pvTaskIncrementMutexHeldCount( void )
+	{
+		/* If xSemaphoreCreateMutex() is called before any tasks have been created
+		then pxCurrentTCB will be NULL. */
+		if( pxCurrentTCB != NULL )
+		{
+			( pxCurrentTCB->uxMutexesHeld )++;
+		}
+
+		return pxCurrentTCB;
+	}
+
+#endif /* configUSE_MUTEXES */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	uint32_t ulTaskNotifyTake( BaseType_t xClearCountOnExit, TickType_t xTicksToWait )
+	{
+	uint32_t ulReturn;
+
+		taskENTER_CRITICAL();
+		{
+			/* Only block if the notification count is not already non-zero. */
+			if( pxCurrentTCB->ulNotifiedValue == 0UL )
+			{
+				/* Mark this task as waiting for a notification. */
+				pxCurrentTCB->ucNotifyState = taskWAITING_NOTIFICATION;
+
+				if( xTicksToWait > ( TickType_t ) 0 )
+				{
+					prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+					traceTASK_NOTIFY_TAKE_BLOCK();
+
+					/* All ports are written to allow a yield in a critical
+					section (some will yield immediately, others wait until the
+					critical section exits) - but it is not something that
+					application code should ever do. */
+					portYIELD_WITHIN_API();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		taskENTER_CRITICAL();
+		{
+			traceTASK_NOTIFY_TAKE();
+			ulReturn = pxCurrentTCB->ulNotifiedValue;
+
+			if( ulReturn != 0UL )
+			{
+				if( xClearCountOnExit != pdFALSE )
+				{
+					pxCurrentTCB->ulNotifiedValue = 0UL;
+				}
+				else
+				{
+					pxCurrentTCB->ulNotifiedValue = ulReturn - 1;
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			pxCurrentTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+		}
+		taskEXIT_CRITICAL();
+
+		return ulReturn;
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	BaseType_t xTaskNotifyWait( uint32_t ulBitsToClearOnEntry, uint32_t ulBitsToClearOnExit, uint32_t *pulNotificationValue, TickType_t xTicksToWait )
+	{
+	BaseType_t xReturn;
+
+		taskENTER_CRITICAL();
+		{
+			/* Only block if a notification is not already pending. */
+			if( pxCurrentTCB->ucNotifyState != taskNOTIFICATION_RECEIVED )
+			{
+				/* Clear bits in the task's notification value as bits may get
+				set	by the notifying task or interrupt.  This can be used to
+				clear the value to zero. */
+				pxCurrentTCB->ulNotifiedValue &= ~ulBitsToClearOnEntry;
+
+				/* Mark this task as waiting for a notification. */
+				pxCurrentTCB->ucNotifyState = taskWAITING_NOTIFICATION;
+
+				if( xTicksToWait > ( TickType_t ) 0 )
+				{
+					prvAddCurrentTaskToDelayedList( xTicksToWait, pdTRUE );
+					traceTASK_NOTIFY_WAIT_BLOCK();
+
+					/* All ports are written to allow a yield in a critical
+					section (some will yield immediately, others wait until the
+					critical section exits) - but it is not something that
+					application code should ever do. */
+					portYIELD_WITHIN_API();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		taskENTER_CRITICAL();
+		{
+			traceTASK_NOTIFY_WAIT();
+
+			if( pulNotificationValue != NULL )
+			{
+				/* Output the current notification value, which may or may not
+				have changed. */
+				*pulNotificationValue = pxCurrentTCB->ulNotifiedValue;
+			}
+
+			/* If ucNotifyValue is set then either the task never entered the
+			blocked state (because a notification was already pending) or the
+			task unblocked because of a notification.  Otherwise the task
+			unblocked because of a timeout. */
+			if( pxCurrentTCB->ucNotifyState == taskWAITING_NOTIFICATION )
+			{
+				/* A notification was not received. */
+				xReturn = pdFALSE;
+			}
+			else
+			{
+				/* A notification was already pending or a notification was
+				received while the task was waiting. */
+				pxCurrentTCB->ulNotifiedValue &= ~ulBitsToClearOnExit;
+				xReturn = pdTRUE;
+			}
+
+			pxCurrentTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+		}
+		taskEXIT_CRITICAL();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	BaseType_t xTaskGenericNotify( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue )
+	{
+	TCB_t * pxTCB;
+	BaseType_t xReturn = pdPASS;
+	uint8_t ucOriginalNotifyState;
+
+		configASSERT( xTaskToNotify );
+		pxTCB = ( TCB_t * ) xTaskToNotify;
+
+		taskENTER_CRITICAL();
+		{
+			if( pulPreviousNotificationValue != NULL )
+			{
+				*pulPreviousNotificationValue = pxTCB->ulNotifiedValue;
+			}
+
+			ucOriginalNotifyState = pxTCB->ucNotifyState;
+
+			pxTCB->ucNotifyState = taskNOTIFICATION_RECEIVED;
+
+			switch( eAction )
+			{
+				case eSetBits	:
+					pxTCB->ulNotifiedValue |= ulValue;
+					break;
+
+				case eIncrement	:
+					( pxTCB->ulNotifiedValue )++;
+					break;
+
+				case eSetValueWithOverwrite	:
+					pxTCB->ulNotifiedValue = ulValue;
+					break;
+
+				case eSetValueWithoutOverwrite :
+					if( ucOriginalNotifyState != taskNOTIFICATION_RECEIVED )
+					{
+						pxTCB->ulNotifiedValue = ulValue;
+					}
+					else
+					{
+						/* The value could not be written to the task. */
+						xReturn = pdFAIL;
+					}
+					break;
+
+				case eNoAction:
+					/* The task is being notified without its notify value being
+					updated. */
+					break;
+			}
+
+			traceTASK_NOTIFY();
+
+			/* If the task is in the blocked state specifically to wait for a
+			notification then unblock it now. */
+			if( ucOriginalNotifyState == taskWAITING_NOTIFICATION )
+			{
+				( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+				prvAddTaskToReadyList( pxTCB );
+
+				/* The task should not have been on an event list. */
+				configASSERT( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL );
+
+				#if( configUSE_TICKLESS_IDLE != 0 )
+				{
+					/* If a task is blocked waiting for a notification then
+					xNextTaskUnblockTime might be set to the blocked task's time
+					out time.  If the task is unblocked for a reason other than
+					a timeout xNextTaskUnblockTime is normally left unchanged,
+					because it will automatically get reset to a new value when
+					the tick count equals xNextTaskUnblockTime.  However if
+					tickless idling is used it might be more important to enter
+					sleep mode at the earliest possible time - so reset
+					xNextTaskUnblockTime here to ensure it is updated at the
+					earliest possible time. */
+					prvResetNextTaskUnblockTime();
+				}
+				#endif
+
+				if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+				{
+					/* The notified task has a priority above the currently
+					executing task so a yield is required. */
+					taskYIELD_IF_USING_PREEMPTION();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	BaseType_t xTaskGenericNotifyFromISR( TaskHandle_t xTaskToNotify, uint32_t ulValue, eNotifyAction eAction, uint32_t *pulPreviousNotificationValue, BaseType_t *pxHigherPriorityTaskWoken )
+	{
+	TCB_t * pxTCB;
+	uint8_t ucOriginalNotifyState;
+	BaseType_t xReturn = pdPASS;
+	UBaseType_t uxSavedInterruptStatus;
+
+		configASSERT( xTaskToNotify );
+
+		/* RTOS ports that support interrupt nesting have the concept of a
+		maximum	system call (or maximum API call) interrupt priority.
+		Interrupts that are	above the maximum system call priority are keep
+		permanently enabled, even when the RTOS kernel is in a critical section,
+		but cannot make any calls to FreeRTOS API functions.  If configASSERT()
+		is defined in FreeRTOSConfig.h then
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+		failure if a FreeRTOS API function is called from an interrupt that has
+		been assigned a priority above the configured maximum system call
+		priority.  Only FreeRTOS functions that end in FromISR can be called
+		from interrupts	that have been assigned a priority at or (logically)
+		below the maximum system call interrupt priority.  FreeRTOS maintains a
+		separate interrupt safe API to ensure interrupt entry is as fast and as
+		simple as possible.  More information (albeit Cortex-M specific) is
+		provided on the following link:
+		http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+		pxTCB = ( TCB_t * ) xTaskToNotify;
+
+		uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+		{
+			if( pulPreviousNotificationValue != NULL )
+			{
+				*pulPreviousNotificationValue = pxTCB->ulNotifiedValue;
+			}
+
+			ucOriginalNotifyState = pxTCB->ucNotifyState;
+			pxTCB->ucNotifyState = taskNOTIFICATION_RECEIVED;
+
+			switch( eAction )
+			{
+				case eSetBits	:
+					pxTCB->ulNotifiedValue |= ulValue;
+					break;
+
+				case eIncrement	:
+					( pxTCB->ulNotifiedValue )++;
+					break;
+
+				case eSetValueWithOverwrite	:
+					pxTCB->ulNotifiedValue = ulValue;
+					break;
+
+				case eSetValueWithoutOverwrite :
+					if( ucOriginalNotifyState != taskNOTIFICATION_RECEIVED )
+					{
+						pxTCB->ulNotifiedValue = ulValue;
+					}
+					else
+					{
+						/* The value could not be written to the task. */
+						xReturn = pdFAIL;
+					}
+					break;
+
+				case eNoAction :
+					/* The task is being notified without its notify value being
+					updated. */
+					break;
+			}
+
+			traceTASK_NOTIFY_FROM_ISR();
+
+			/* If the task is in the blocked state specifically to wait for a
+			notification then unblock it now. */
+			if( ucOriginalNotifyState == taskWAITING_NOTIFICATION )
+			{
+				/* The task should not have been on an event list. */
+				configASSERT( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL );
+
+				if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+				{
+					( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+					prvAddTaskToReadyList( pxTCB );
+				}
+				else
+				{
+					/* The delayed and ready lists cannot be accessed, so hold
+					this task pending until the scheduler is resumed. */
+					vListInsertEnd( &( xPendingReadyList ), &( pxTCB->xEventListItem ) );
+				}
+
+				if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+				{
+					/* The notified task has a priority above the currently
+					executing task so a yield is required. */
+					if( pxHigherPriorityTaskWoken != NULL )
+					{
+						*pxHigherPriorityTaskWoken = pdTRUE;
+					}
+					else
+					{
+						/* Mark that a yield is pending in case the user is not
+						using the "xHigherPriorityTaskWoken" parameter to an ISR
+						safe FreeRTOS function. */
+						xYieldPending = pdTRUE;
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+
+		return xReturn;
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	void vTaskNotifyGiveFromISR( TaskHandle_t xTaskToNotify, BaseType_t *pxHigherPriorityTaskWoken )
+	{
+	TCB_t * pxTCB;
+	uint8_t ucOriginalNotifyState;
+	UBaseType_t uxSavedInterruptStatus;
+
+		configASSERT( xTaskToNotify );
+
+		/* RTOS ports that support interrupt nesting have the concept of a
+		maximum	system call (or maximum API call) interrupt priority.
+		Interrupts that are	above the maximum system call priority are keep
+		permanently enabled, even when the RTOS kernel is in a critical section,
+		but cannot make any calls to FreeRTOS API functions.  If configASSERT()
+		is defined in FreeRTOSConfig.h then
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID() will result in an assertion
+		failure if a FreeRTOS API function is called from an interrupt that has
+		been assigned a priority above the configured maximum system call
+		priority.  Only FreeRTOS functions that end in FromISR can be called
+		from interrupts	that have been assigned a priority at or (logically)
+		below the maximum system call interrupt priority.  FreeRTOS maintains a
+		separate interrupt safe API to ensure interrupt entry is as fast and as
+		simple as possible.  More information (albeit Cortex-M specific) is
+		provided on the following link:
+		http://www.freertos.org/RTOS-Cortex-M3-M4.html */
+		portASSERT_IF_INTERRUPT_PRIORITY_INVALID();
+
+		pxTCB = ( TCB_t * ) xTaskToNotify;
+
+		uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
+		{
+			ucOriginalNotifyState = pxTCB->ucNotifyState;
+			pxTCB->ucNotifyState = taskNOTIFICATION_RECEIVED;
+
+			/* 'Giving' is equivalent to incrementing a count in a counting
+			semaphore. */
+			( pxTCB->ulNotifiedValue )++;
+
+			traceTASK_NOTIFY_GIVE_FROM_ISR();
+
+			/* If the task is in the blocked state specifically to wait for a
+			notification then unblock it now. */
+			if( ucOriginalNotifyState == taskWAITING_NOTIFICATION )
+			{
+				/* The task should not have been on an event list. */
+				configASSERT( listLIST_ITEM_CONTAINER( &( pxTCB->xEventListItem ) ) == NULL );
+
+				if( uxSchedulerSuspended == ( UBaseType_t ) pdFALSE )
+				{
+					( void ) uxListRemove( &( pxTCB->xStateListItem ) );
+					prvAddTaskToReadyList( pxTCB );
+				}
+				else
+				{
+					/* The delayed and ready lists cannot be accessed, so hold
+					this task pending until the scheduler is resumed. */
+					vListInsertEnd( &( xPendingReadyList ), &( pxTCB->xEventListItem ) );
+				}
+
+				if( pxTCB->uxPriority > pxCurrentTCB->uxPriority )
+				{
+					/* The notified task has a priority above the currently
+					executing task so a yield is required. */
+					if( pxHigherPriorityTaskWoken != NULL )
+					{
+						*pxHigherPriorityTaskWoken = pdTRUE;
+					}
+					else
+					{
+						/* Mark that a yield is pending in case the user is not
+						using the "xHigherPriorityTaskWoken" parameter in an ISR
+						safe FreeRTOS function. */
+						xYieldPending = pdTRUE;
+					}
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+
+/*-----------------------------------------------------------*/
+
+#if( configUSE_TASK_NOTIFICATIONS == 1 )
+
+	BaseType_t xTaskNotifyStateClear( TaskHandle_t xTask )
+	{
+	TCB_t *pxTCB;
+	BaseType_t xReturn;
+
+		/* If null is passed in here then it is the calling task that is having
+		its notification state cleared. */
+		pxTCB = prvGetTCBFromHandle( xTask );
+
+		taskENTER_CRITICAL();
+		{
+			if( pxTCB->ucNotifyState == taskNOTIFICATION_RECEIVED )
+			{
+				pxTCB->ucNotifyState = taskNOT_WAITING_NOTIFICATION;
+				xReturn = pdPASS;
+			}
+			else
+			{
+				xReturn = pdFAIL;
+			}
+		}
+		taskEXIT_CRITICAL();
+
+		return xReturn;
+	}
+
+#endif /* configUSE_TASK_NOTIFICATIONS */
+/*-----------------------------------------------------------*/
+
+
+static void prvAddCurrentTaskToDelayedList( TickType_t xTicksToWait, const BaseType_t xCanBlockIndefinitely )
+{
+TickType_t xTimeToWake;
+const TickType_t xConstTickCount = xTickCount;
+
+	#if( INCLUDE_xTaskAbortDelay == 1 )
+	{
+		/* About to enter a delayed list, so ensure the ucDelayAborted flag is
+		reset to pdFALSE so it can be detected as having been set to pdTRUE
+		when the task leaves the Blocked state. */
+		pxCurrentTCB->ucDelayAborted = pdFALSE;
+	}
+	#endif
+
+	/* Remove the task from the ready list before adding it to the blocked list
+	as the same list item is used for both lists. */
+	if( uxListRemove( &( pxCurrentTCB->xStateListItem ) ) == ( UBaseType_t ) 0 )
+	{
+		/* The current task must be in a ready list, so there is no need to
+		check, and the port reset macro can be called directly. */
+		portRESET_READY_PRIORITY( pxCurrentTCB->uxPriority, uxTopReadyPriority );
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	#if ( INCLUDE_vTaskSuspend == 1 )
+	{
+		if( ( xTicksToWait == portMAX_DELAY ) && ( xCanBlockIndefinitely != pdFALSE ) )
+		{
+			/* Add the task to the suspended task list instead of a delayed task
+			list to ensure it is not woken by a timing event.  It will block
+			indefinitely. */
+			vListInsertEnd( &xSuspendedTaskList, &( pxCurrentTCB->xStateListItem ) );
+		}
+		else
+		{
+			/* Calculate the time at which the task should be woken if the event
+			does not occur.  This may overflow but this doesn't matter, the
+			kernel will manage it correctly. */
+			xTimeToWake = xConstTickCount + xTicksToWait;
+
+			/* The list item will be inserted in wake time order. */
+			listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xStateListItem ), xTimeToWake );
+
+			if( xTimeToWake < xConstTickCount )
+			{
+				/* Wake time has overflowed.  Place this item in the overflow
+				list. */
+				vListInsert( pxOverflowDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+			}
+			else
+			{
+				/* The wake time has not overflowed, so the current block list
+				is used. */
+				vListInsert( pxDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+
+				/* If the task entering the blocked state was placed at the
+				head of the list of blocked tasks then xNextTaskUnblockTime
+				needs to be updated too. */
+				if( xTimeToWake < xNextTaskUnblockTime )
+				{
+					xNextTaskUnblockTime = xTimeToWake;
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+	}
+	#else /* INCLUDE_vTaskSuspend */
+	{
+		/* Calculate the time at which the task should be woken if the event
+		does not occur.  This may overflow but this doesn't matter, the kernel
+		will manage it correctly. */
+		xTimeToWake = xConstTickCount + xTicksToWait;
+
+		/* The list item will be inserted in wake time order. */
+		listSET_LIST_ITEM_VALUE( &( pxCurrentTCB->xStateListItem ), xTimeToWake );
+
+		if( xTimeToWake < xConstTickCount )
+		{
+			/* Wake time has overflowed.  Place this item in the overflow list. */
+			vListInsert( pxOverflowDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+		}
+		else
+		{
+			/* The wake time has not overflowed, so the current block list is used. */
+			vListInsert( pxDelayedTaskList, &( pxCurrentTCB->xStateListItem ) );
+
+			/* If the task entering the blocked state was placed at the head of the
+			list of blocked tasks then xNextTaskUnblockTime needs to be updated
+			too. */
+			if( xTimeToWake < xNextTaskUnblockTime )
+			{
+				xNextTaskUnblockTime = xTimeToWake;
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+
+		/* Avoid compiler warning when INCLUDE_vTaskSuspend is not 1. */
+		( void ) xCanBlockIndefinitely;
+	}
+	#endif /* INCLUDE_vTaskSuspend */
+}
+
+
+#ifdef FREERTOS_MODULE_TEST
+	#include "tasks_test_access_functions.h"
+#endif
+
diff --git a/Program/XLLC/FreeRTOS/timers.c b/Program/XLLC/FreeRTOS/timers.c
new file mode 100644
index 0000000000000000000000000000000000000000..e49587f5115dbbe2e23a7ecfb53752783fb98911
--- /dev/null
+++ b/Program/XLLC/FreeRTOS/timers.c
@@ -0,0 +1,1092 @@
+/*
+    FreeRTOS V9.0.0 - Copyright (C) 2016 Real Time Engineers Ltd.
+    All rights reserved
+
+    VISIT http://www.FreeRTOS.org TO ENSURE YOU ARE USING THE LATEST VERSION.
+
+    This file is part of the FreeRTOS distribution.
+
+    FreeRTOS is free software; you can redistribute it and/or modify it under
+    the terms of the GNU General Public License (version 2) as published by the
+    Free Software Foundation >>>> AND MODIFIED BY <<<< the FreeRTOS exception.
+
+    ***************************************************************************
+    >>!   NOTE: The modification to the GPL is included to allow you to     !<<
+    >>!   distribute a combined work that includes FreeRTOS without being   !<<
+    >>!   obliged to provide the source code for proprietary components     !<<
+    >>!   outside of the FreeRTOS kernel.                                   !<<
+    ***************************************************************************
+
+    FreeRTOS is distributed in the hope that it will be useful, but WITHOUT ANY
+    WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+    FOR A PARTICULAR PURPOSE.  Full license text is available on the following
+    link: http://www.freertos.org/a00114.html
+
+    ***************************************************************************
+     *                                                                       *
+     *    FreeRTOS provides completely free yet professionally developed,    *
+     *    robust, strictly quality controlled, supported, and cross          *
+     *    platform software that is more than just the market leader, it     *
+     *    is the industry's de facto standard.                               *
+     *                                                                       *
+     *    Help yourself get started quickly while simultaneously helping     *
+     *    to support the FreeRTOS project by purchasing a FreeRTOS           *
+     *    tutorial book, reference manual, or both:                          *
+     *    http://www.FreeRTOS.org/Documentation                              *
+     *                                                                       *
+    ***************************************************************************
+
+    http://www.FreeRTOS.org/FAQHelp.html - Having a problem?  Start by reading
+    the FAQ page "My application does not run, what could be wrong?".  Have you
+    defined configASSERT()?
+
+    http://www.FreeRTOS.org/support - In return for receiving this top quality
+    embedded software for free we request you assist our global community by
+    participating in the support forum.
+
+    http://www.FreeRTOS.org/training - Investing in training allows your team to
+    be as productive as possible as early as possible.  Now you can receive
+    FreeRTOS training directly from Richard Barry, CEO of Real Time Engineers
+    Ltd, and the world's leading authority on the world's leading RTOS.
+
+    http://www.FreeRTOS.org/plus - A selection of FreeRTOS ecosystem products,
+    including FreeRTOS+Trace - an indispensable productivity tool, a DOS
+    compatible FAT file system, and our tiny thread aware UDP/IP stack.
+
+    http://www.FreeRTOS.org/labs - Where new FreeRTOS products go to incubate.
+    Come and try FreeRTOS+TCP, our new open source TCP/IP stack for FreeRTOS.
+
+    http://www.OpenRTOS.com - Real Time Engineers ltd. license FreeRTOS to High
+    Integrity Systems ltd. to sell under the OpenRTOS brand.  Low cost OpenRTOS
+    licenses offer ticketed support, indemnification and commercial middleware.
+
+    http://www.SafeRTOS.com - High Integrity Systems also provide a safety
+    engineered and independently SIL3 certified version for use in safety and
+    mission critical applications that require provable dependability.
+
+    1 tab == 4 spaces!
+*/
+
+/* Standard includes. */
+#include 
+
+/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining
+all the API functions to use the MPU wrappers.  That should only be done when
+task.h is included from an application file. */
+#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE
+
+#include "FreeRTOS.h"
+#include "task.h"
+#include "queue.h"
+#include "timers.h"
+
+#if ( INCLUDE_xTimerPendFunctionCall == 1 ) && ( configUSE_TIMERS == 0 )
+	#error configUSE_TIMERS must be set to 1 to make the xTimerPendFunctionCall() function available.
+#endif
+
+/* Lint e961 and e750 are suppressed as a MISRA exception justified because the
+MPU ports require MPU_WRAPPERS_INCLUDED_FROM_API_FILE to be defined for the
+header files above, but not in this file, in order to generate the correct
+privileged Vs unprivileged linkage and placement. */
+#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE /*lint !e961 !e750. */
+
+
+/* This entire source file will be skipped if the application is not configured
+to include software timer functionality.  This #if is closed at the very bottom
+of this file.  If you want to include software timer functionality then ensure
+configUSE_TIMERS is set to 1 in FreeRTOSConfig.h. */
+#if ( configUSE_TIMERS == 1 )
+
+/* Misc definitions. */
+#define tmrNO_DELAY		( TickType_t ) 0U
+
+/* The definition of the timers themselves. */
+typedef struct tmrTimerControl
+{
+	const char				*pcTimerName;		/*<< Text name.  This is not used by the kernel, it is included simply to make debugging easier. */ /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	ListItem_t				xTimerListItem;		/*<< Standard linked list item as used by all kernel features for event management. */
+	TickType_t				xTimerPeriodInTicks;/*<< How quickly and often the timer expires. */
+	UBaseType_t				uxAutoReload;		/*<< Set to pdTRUE if the timer should be automatically restarted once expired.  Set to pdFALSE if the timer is, in effect, a one-shot timer. */
+	void 					*pvTimerID;			/*<< An ID to identify the timer.  This allows the timer to be identified when the same callback is used for multiple timers. */
+	TimerCallbackFunction_t	pxCallbackFunction;	/*<< The function that will be called when the timer expires. */
+	#if( configUSE_TRACE_FACILITY == 1 )
+		UBaseType_t			uxTimerNumber;		/*<< An ID assigned by trace tools such as FreeRTOS+Trace */
+	#endif
+
+	#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
+		uint8_t 			ucStaticallyAllocated; /*<< Set to pdTRUE if the timer was created statically so no attempt is made to free the memory again if the timer is later deleted. */
+	#endif
+} xTIMER;
+
+/* The old xTIMER name is maintained above then typedefed to the new Timer_t
+name below to enable the use of older kernel aware debuggers. */
+typedef xTIMER Timer_t;
+
+/* The definition of messages that can be sent and received on the timer queue.
+Two types of message can be queued - messages that manipulate a software timer,
+and messages that request the execution of a non-timer related callback.  The
+two message types are defined in two separate structures, xTimerParametersType
+and xCallbackParametersType respectively. */
+typedef struct tmrTimerParameters
+{
+	TickType_t			xMessageValue;		/*<< An optional value used by a subset of commands, for example, when changing the period of a timer. */
+	Timer_t *			pxTimer;			/*<< The timer to which the command will be applied. */
+} TimerParameter_t;
+
+
+typedef struct tmrCallbackParameters
+{
+	PendedFunction_t	pxCallbackFunction;	/* << The callback function to execute. */
+	void *pvParameter1;						/* << The value that will be used as the callback functions first parameter. */
+	uint32_t ulParameter2;					/* << The value that will be used as the callback functions second parameter. */
+} CallbackParameters_t;
+
+/* The structure that contains the two message types, along with an identifier
+that is used to determine which message type is valid. */
+typedef struct tmrTimerQueueMessage
+{
+	BaseType_t			xMessageID;			/*<< The command being sent to the timer service task. */
+	union
+	{
+		TimerParameter_t xTimerParameters;
+
+		/* Don't include xCallbackParameters if it is not going to be used as
+		it makes the structure (and therefore the timer queue) larger. */
+		#if ( INCLUDE_xTimerPendFunctionCall == 1 )
+			CallbackParameters_t xCallbackParameters;
+		#endif /* INCLUDE_xTimerPendFunctionCall */
+	} u;
+} DaemonTaskMessage_t;
+
+/*lint -e956 A manual analysis and inspection has been used to determine which
+static variables must be declared volatile. */
+
+/* The list in which active timers are stored.  Timers are referenced in expire
+time order, with the nearest expiry time at the front of the list.  Only the
+timer service task is allowed to access these lists. */
+PRIVILEGED_DATA static List_t xActiveTimerList1;
+PRIVILEGED_DATA static List_t xActiveTimerList2;
+PRIVILEGED_DATA static List_t *pxCurrentTimerList;
+PRIVILEGED_DATA static List_t *pxOverflowTimerList;
+
+/* A queue that is used to send commands to the timer service task. */
+PRIVILEGED_DATA static QueueHandle_t xTimerQueue = NULL;
+PRIVILEGED_DATA static TaskHandle_t xTimerTaskHandle = NULL;
+
+/*lint +e956 */
+
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+	/* If static allocation is supported then the application must provide the
+	following callback function - which enables the application to optionally
+	provide the memory that will be used by the timer task as the task's stack
+	and TCB. */
+	extern void vApplicationGetTimerTaskMemory( StaticTask_t **ppxTimerTaskTCBBuffer, StackType_t **ppxTimerTaskStackBuffer, uint32_t *pulTimerTaskStackSize );
+
+#endif
+
+/*
+ * Initialise the infrastructure used by the timer service task if it has not
+ * been initialised already.
+ */
+static void prvCheckForValidListAndQueue( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * The timer service task (daemon).  Timer functionality is controlled by this
+ * task.  Other tasks communicate with the timer service task using the
+ * xTimerQueue queue.
+ */
+static void prvTimerTask( void *pvParameters ) PRIVILEGED_FUNCTION;
+
+/*
+ * Called by the timer service task to interpret and process a command it
+ * received on the timer queue.
+ */
+static void prvProcessReceivedCommands( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Insert the timer into either xActiveTimerList1, or xActiveTimerList2,
+ * depending on if the expire time causes a timer counter overflow.
+ */
+static BaseType_t prvInsertTimerInActiveList( Timer_t * const pxTimer, const TickType_t xNextExpiryTime, const TickType_t xTimeNow, const TickType_t xCommandTime ) PRIVILEGED_FUNCTION;
+
+/*
+ * An active timer has reached its expire time.  Reload the timer if it is an
+ * auto reload timer, then call its callback.
+ */
+static void prvProcessExpiredTimer( const TickType_t xNextExpireTime, const TickType_t xTimeNow ) PRIVILEGED_FUNCTION;
+
+/*
+ * The tick count has overflowed.  Switch the timer lists after ensuring the
+ * current timer list does not still reference some timers.
+ */
+static void prvSwitchTimerLists( void ) PRIVILEGED_FUNCTION;
+
+/*
+ * Obtain the current tick count, setting *pxTimerListsWereSwitched to pdTRUE
+ * if a tick count overflow occurred since prvSampleTimeNow() was last called.
+ */
+static TickType_t prvSampleTimeNow( BaseType_t * const pxTimerListsWereSwitched ) PRIVILEGED_FUNCTION;
+
+/*
+ * If the timer list contains any active timers then return the expire time of
+ * the timer that will expire first and set *pxListWasEmpty to false.  If the
+ * timer list does not contain any timers then return 0 and set *pxListWasEmpty
+ * to pdTRUE.
+ */
+static TickType_t prvGetNextExpireTime( BaseType_t * const pxListWasEmpty ) PRIVILEGED_FUNCTION;
+
+/*
+ * If a timer has expired, process it.  Otherwise, block the timer service task
+ * until either a timer does expire or a command is received.
+ */
+static void prvProcessTimerOrBlockTask( const TickType_t xNextExpireTime, BaseType_t xListWasEmpty ) PRIVILEGED_FUNCTION;
+
+/*
+ * Called after a Timer_t structure has been allocated either statically or
+ * dynamically to fill in the structure's members.
+ */
+static void prvInitialiseNewTimer(	const char * const pcTimerName,
+									const TickType_t xTimerPeriodInTicks,
+									const UBaseType_t uxAutoReload,
+									void * const pvTimerID,
+									TimerCallbackFunction_t pxCallbackFunction,
+									Timer_t *pxNewTimer ) PRIVILEGED_FUNCTION; /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+/*-----------------------------------------------------------*/
+
+BaseType_t xTimerCreateTimerTask( void )
+{
+BaseType_t xReturn = pdFAIL;
+
+	/* This function is called when the scheduler is started if
+	configUSE_TIMERS is set to 1.  Check that the infrastructure used by the
+	timer service task has been created/initialised.  If timers have already
+	been created then the initialisation will already have been performed. */
+	prvCheckForValidListAndQueue();
+
+	if( xTimerQueue != NULL )
+	{
+		#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+		{
+			StaticTask_t *pxTimerTaskTCBBuffer = NULL;
+			StackType_t *pxTimerTaskStackBuffer = NULL;
+			uint32_t ulTimerTaskStackSize;
+
+			vApplicationGetTimerTaskMemory( &pxTimerTaskTCBBuffer, &pxTimerTaskStackBuffer, &ulTimerTaskStackSize );
+			xTimerTaskHandle = xTaskCreateStatic(	prvTimerTask,
+													"Tmr Svc",
+													ulTimerTaskStackSize,
+													NULL,
+													( ( UBaseType_t ) configTIMER_TASK_PRIORITY ) | portPRIVILEGE_BIT,
+													pxTimerTaskStackBuffer,
+													pxTimerTaskTCBBuffer );
+
+			if( xTimerTaskHandle != NULL )
+			{
+				xReturn = pdPASS;
+			}
+		}
+		#else
+		{
+			xReturn = xTaskCreate(	prvTimerTask,
+									"Tmr Svc",
+									configTIMER_TASK_STACK_DEPTH,
+									NULL,
+									( ( UBaseType_t ) configTIMER_TASK_PRIORITY ) | portPRIVILEGE_BIT,
+									&xTimerTaskHandle );
+		}
+		#endif /* configSUPPORT_STATIC_ALLOCATION */
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	configASSERT( xReturn );
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+
+	TimerHandle_t xTimerCreate(	const char * const pcTimerName,
+								const TickType_t xTimerPeriodInTicks,
+								const UBaseType_t uxAutoReload,
+								void * const pvTimerID,
+								TimerCallbackFunction_t pxCallbackFunction ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	{
+	Timer_t *pxNewTimer;
+
+		pxNewTimer = ( Timer_t * ) pvPortMalloc( sizeof( Timer_t ) );
+
+		if( pxNewTimer != NULL )
+		{
+			prvInitialiseNewTimer( pcTimerName, xTimerPeriodInTicks, uxAutoReload, pvTimerID, pxCallbackFunction, pxNewTimer );
+
+			#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+			{
+				/* Timers can be created statically or dynamically, so note this
+				timer was created dynamically in case the timer is later
+				deleted. */
+				pxNewTimer->ucStaticallyAllocated = pdFALSE;
+			}
+			#endif /* configSUPPORT_STATIC_ALLOCATION */
+		}
+
+		return pxNewTimer;
+	}
+
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+
+	TimerHandle_t xTimerCreateStatic(	const char * const pcTimerName,
+										const TickType_t xTimerPeriodInTicks,
+										const UBaseType_t uxAutoReload,
+										void * const pvTimerID,
+										TimerCallbackFunction_t pxCallbackFunction,
+										StaticTimer_t *pxTimerBuffer ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+	{
+	Timer_t *pxNewTimer;
+
+		#if( configASSERT_DEFINED == 1 )
+		{
+			/* Sanity check that the size of the structure used to declare a
+			variable of type StaticTimer_t equals the size of the real timer
+			structures. */
+			volatile size_t xSize = sizeof( StaticTimer_t );
+			configASSERT( xSize == sizeof( Timer_t ) );
+		}
+		#endif /* configASSERT_DEFINED */
+
+		/* A pointer to a StaticTimer_t structure MUST be provided, use it. */
+		configASSERT( pxTimerBuffer );
+		pxNewTimer = ( Timer_t * ) pxTimerBuffer; /*lint !e740 Unusual cast is ok as the structures are designed to have the same alignment, and the size is checked by an assert. */
+
+		if( pxNewTimer != NULL )
+		{
+			prvInitialiseNewTimer( pcTimerName, xTimerPeriodInTicks, uxAutoReload, pvTimerID, pxCallbackFunction, pxNewTimer );
+
+			#if( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
+			{
+				/* Timers can be created statically or dynamically so note this
+				timer was created statically in case it is later deleted. */
+				pxNewTimer->ucStaticallyAllocated = pdTRUE;
+			}
+			#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+		}
+
+		return pxNewTimer;
+	}
+
+#endif /* configSUPPORT_STATIC_ALLOCATION */
+/*-----------------------------------------------------------*/
+
+static void prvInitialiseNewTimer(	const char * const pcTimerName,
+									const TickType_t xTimerPeriodInTicks,
+									const UBaseType_t uxAutoReload,
+									void * const pvTimerID,
+									TimerCallbackFunction_t pxCallbackFunction,
+									Timer_t *pxNewTimer ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+{
+	/* 0 is not a valid value for xTimerPeriodInTicks. */
+	configASSERT( ( xTimerPeriodInTicks > 0 ) );
+
+	if( pxNewTimer != NULL )
+	{
+		/* Ensure the infrastructure used by the timer service task has been
+		created/initialised. */
+		prvCheckForValidListAndQueue();
+
+		/* Initialise the timer structure members using the function
+		parameters. */
+		pxNewTimer->pcTimerName = pcTimerName;
+		pxNewTimer->xTimerPeriodInTicks = xTimerPeriodInTicks;
+		pxNewTimer->uxAutoReload = uxAutoReload;
+		pxNewTimer->pvTimerID = pvTimerID;
+		pxNewTimer->pxCallbackFunction = pxCallbackFunction;
+		vListInitialiseItem( &( pxNewTimer->xTimerListItem ) );
+		traceTIMER_CREATE( pxNewTimer );
+	}
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xTimerGenericCommand( TimerHandle_t xTimer, const BaseType_t xCommandID, const TickType_t xOptionalValue, BaseType_t * const pxHigherPriorityTaskWoken, const TickType_t xTicksToWait )
+{
+BaseType_t xReturn = pdFAIL;
+DaemonTaskMessage_t xMessage;
+
+	configASSERT( xTimer );
+
+	/* Send a message to the timer service task to perform a particular action
+	on a particular timer definition. */
+	if( xTimerQueue != NULL )
+	{
+		/* Send a command to the timer service task to start the xTimer timer. */
+		xMessage.xMessageID = xCommandID;
+		xMessage.u.xTimerParameters.xMessageValue = xOptionalValue;
+		xMessage.u.xTimerParameters.pxTimer = ( Timer_t * ) xTimer;
+
+		if( xCommandID < tmrFIRST_FROM_ISR_COMMAND )
+		{
+			if( xTaskGetSchedulerState() == taskSCHEDULER_RUNNING )
+			{
+				xReturn = xQueueSendToBack( xTimerQueue, &xMessage, xTicksToWait );
+			}
+			else
+			{
+				xReturn = xQueueSendToBack( xTimerQueue, &xMessage, tmrNO_DELAY );
+			}
+		}
+		else
+		{
+			xReturn = xQueueSendToBackFromISR( xTimerQueue, &xMessage, pxHigherPriorityTaskWoken );
+		}
+
+		traceTIMER_COMMAND_SEND( xTimer, xCommandID, xOptionalValue, xReturn );
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+TaskHandle_t xTimerGetTimerDaemonTaskHandle( void )
+{
+	/* If xTimerGetTimerDaemonTaskHandle() is called before the scheduler has been
+	started, then xTimerTaskHandle will be NULL. */
+	configASSERT( ( xTimerTaskHandle != NULL ) );
+	return xTimerTaskHandle;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTimerGetPeriod( TimerHandle_t xTimer )
+{
+Timer_t *pxTimer = ( Timer_t * ) xTimer;
+
+	configASSERT( xTimer );
+	return pxTimer->xTimerPeriodInTicks;
+}
+/*-----------------------------------------------------------*/
+
+TickType_t xTimerGetExpiryTime( TimerHandle_t xTimer )
+{
+Timer_t * pxTimer = ( Timer_t * ) xTimer;
+TickType_t xReturn;
+
+	configASSERT( xTimer );
+	xReturn = listGET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ) );
+	return xReturn;
+}
+/*-----------------------------------------------------------*/
+
+const char * pcTimerGetName( TimerHandle_t xTimer ) /*lint !e971 Unqualified char types are allowed for strings and single characters only. */
+{
+Timer_t *pxTimer = ( Timer_t * ) xTimer;
+
+	configASSERT( xTimer );
+	return pxTimer->pcTimerName;
+}
+/*-----------------------------------------------------------*/
+
+static void prvProcessExpiredTimer( const TickType_t xNextExpireTime, const TickType_t xTimeNow )
+{
+BaseType_t xResult;
+Timer_t * const pxTimer = ( Timer_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxCurrentTimerList );
+
+	/* Remove the timer from the list of active timers.  A check has already
+	been performed to ensure the list is not empty. */
+	( void ) uxListRemove( &( pxTimer->xTimerListItem ) );
+	traceTIMER_EXPIRED( pxTimer );
+
+	/* If the timer is an auto reload timer then calculate the next
+	expiry time and re-insert the timer in the list of active timers. */
+	if( pxTimer->uxAutoReload == ( UBaseType_t ) pdTRUE )
+	{
+		/* The timer is inserted into a list using a time relative to anything
+		other than the current time.  It will therefore be inserted into the
+		correct list relative to the time this task thinks it is now. */
+		if( prvInsertTimerInActiveList( pxTimer, ( xNextExpireTime + pxTimer->xTimerPeriodInTicks ), xTimeNow, xNextExpireTime ) != pdFALSE )
+		{
+			/* The timer expired before it was added to the active timer
+			list.  Reload it now.  */
+			xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START_DONT_TRACE, xNextExpireTime, NULL, tmrNO_DELAY );
+			configASSERT( xResult );
+			( void ) xResult;
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	else
+	{
+		mtCOVERAGE_TEST_MARKER();
+	}
+
+	/* Call the timer callback. */
+	pxTimer->pxCallbackFunction( ( TimerHandle_t ) pxTimer );
+}
+/*-----------------------------------------------------------*/
+
+static void prvTimerTask( void *pvParameters )
+{
+TickType_t xNextExpireTime;
+BaseType_t xListWasEmpty;
+
+	/* Just to avoid compiler warnings. */
+	( void ) pvParameters;
+
+	#if( configUSE_DAEMON_TASK_STARTUP_HOOK == 1 )
+	{
+		extern void vApplicationDaemonTaskStartupHook( void );
+
+		/* Allow the application writer to execute some code in the context of
+		this task at the point the task starts executing.  This is useful if the
+		application includes initialisation code that would benefit from
+		executing after the scheduler has been started. */
+		vApplicationDaemonTaskStartupHook();
+	}
+	#endif /* configUSE_DAEMON_TASK_STARTUP_HOOK */
+
+	for( ;; )
+	{
+		/* Query the timers list to see if it contains any timers, and if so,
+		obtain the time at which the next timer will expire. */
+		xNextExpireTime = prvGetNextExpireTime( &xListWasEmpty );
+
+		/* If a timer has expired, process it.  Otherwise, block this task
+		until either a timer does expire, or a command is received. */
+		prvProcessTimerOrBlockTask( xNextExpireTime, xListWasEmpty );
+
+		/* Empty the command queue. */
+		prvProcessReceivedCommands();
+	}
+}
+/*-----------------------------------------------------------*/
+
+static void prvProcessTimerOrBlockTask( const TickType_t xNextExpireTime, BaseType_t xListWasEmpty )
+{
+TickType_t xTimeNow;
+BaseType_t xTimerListsWereSwitched;
+
+	vTaskSuspendAll();
+	{
+		/* Obtain the time now to make an assessment as to whether the timer
+		has expired or not.  If obtaining the time causes the lists to switch
+		then don't process this timer as any timers that remained in the list
+		when the lists were switched will have been processed within the
+		prvSampleTimeNow() function. */
+		xTimeNow = prvSampleTimeNow( &xTimerListsWereSwitched );
+		if( xTimerListsWereSwitched == pdFALSE )
+		{
+			/* The tick count has not overflowed, has the timer expired? */
+			if( ( xListWasEmpty == pdFALSE ) && ( xNextExpireTime <= xTimeNow ) )
+			{
+				( void ) xTaskResumeAll();
+				prvProcessExpiredTimer( xNextExpireTime, xTimeNow );
+			}
+			else
+			{
+				/* The tick count has not overflowed, and the next expire
+				time has not been reached yet.  This task should therefore
+				block to wait for the next expire time or a command to be
+				received - whichever comes first.  The following line cannot
+				be reached unless xNextExpireTime > xTimeNow, except in the
+				case when the current timer list is empty. */
+				if( xListWasEmpty != pdFALSE )
+				{
+					/* The current timer list is empty - is the overflow list
+					also empty? */
+					xListWasEmpty = listLIST_IS_EMPTY( pxOverflowTimerList );
+				}
+
+				vQueueWaitForMessageRestricted( xTimerQueue, ( xNextExpireTime - xTimeNow ), xListWasEmpty );
+
+				if( xTaskResumeAll() == pdFALSE )
+				{
+					/* Yield to wait for either a command to arrive, or the
+					block time to expire.  If a command arrived between the
+					critical section being exited and this yield then the yield
+					will not cause the task to block. */
+					portYIELD_WITHIN_API();
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+		}
+		else
+		{
+			( void ) xTaskResumeAll();
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+static TickType_t prvGetNextExpireTime( BaseType_t * const pxListWasEmpty )
+{
+TickType_t xNextExpireTime;
+
+	/* Timers are listed in expiry time order, with the head of the list
+	referencing the task that will expire first.  Obtain the time at which
+	the timer with the nearest expiry time will expire.  If there are no
+	active timers then just set the next expire time to 0.  That will cause
+	this task to unblock when the tick count overflows, at which point the
+	timer lists will be switched and the next expiry time can be
+	re-assessed.  */
+	*pxListWasEmpty = listLIST_IS_EMPTY( pxCurrentTimerList );
+	if( *pxListWasEmpty == pdFALSE )
+	{
+		xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );
+	}
+	else
+	{
+		/* Ensure the task unblocks when the tick count rolls over. */
+		xNextExpireTime = ( TickType_t ) 0U;
+	}
+
+	return xNextExpireTime;
+}
+/*-----------------------------------------------------------*/
+
+static TickType_t prvSampleTimeNow( BaseType_t * const pxTimerListsWereSwitched )
+{
+TickType_t xTimeNow;
+PRIVILEGED_DATA static TickType_t xLastTime = ( TickType_t ) 0U; /*lint !e956 Variable is only accessible to one task. */
+
+	xTimeNow = xTaskGetTickCount();
+
+	if( xTimeNow < xLastTime )
+	{
+		prvSwitchTimerLists();
+		*pxTimerListsWereSwitched = pdTRUE;
+	}
+	else
+	{
+		*pxTimerListsWereSwitched = pdFALSE;
+	}
+
+	xLastTime = xTimeNow;
+
+	return xTimeNow;
+}
+/*-----------------------------------------------------------*/
+
+static BaseType_t prvInsertTimerInActiveList( Timer_t * const pxTimer, const TickType_t xNextExpiryTime, const TickType_t xTimeNow, const TickType_t xCommandTime )
+{
+BaseType_t xProcessTimerNow = pdFALSE;
+
+	listSET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ), xNextExpiryTime );
+	listSET_LIST_ITEM_OWNER( &( pxTimer->xTimerListItem ), pxTimer );
+
+	if( xNextExpiryTime <= xTimeNow )
+	{
+		/* Has the expiry time elapsed between the command to start/reset a
+		timer was issued, and the time the command was processed? */
+		if( ( ( TickType_t ) ( xTimeNow - xCommandTime ) ) >= pxTimer->xTimerPeriodInTicks ) /*lint !e961 MISRA exception as the casts are only redundant for some ports. */
+		{
+			/* The time between a command being issued and the command being
+			processed actually exceeds the timers period.  */
+			xProcessTimerNow = pdTRUE;
+		}
+		else
+		{
+			vListInsert( pxOverflowTimerList, &( pxTimer->xTimerListItem ) );
+		}
+	}
+	else
+	{
+		if( ( xTimeNow < xCommandTime ) && ( xNextExpiryTime >= xCommandTime ) )
+		{
+			/* If, since the command was issued, the tick count has overflowed
+			but the expiry time has not, then the timer must have already passed
+			its expiry time and should be processed immediately. */
+			xProcessTimerNow = pdTRUE;
+		}
+		else
+		{
+			vListInsert( pxCurrentTimerList, &( pxTimer->xTimerListItem ) );
+		}
+	}
+
+	return xProcessTimerNow;
+}
+/*-----------------------------------------------------------*/
+
+static void	prvProcessReceivedCommands( void )
+{
+DaemonTaskMessage_t xMessage;
+Timer_t *pxTimer;
+BaseType_t xTimerListsWereSwitched, xResult;
+TickType_t xTimeNow;
+
+	while( xQueueReceive( xTimerQueue, &xMessage, tmrNO_DELAY ) != pdFAIL ) /*lint !e603 xMessage does not have to be initialised as it is passed out, not in, and it is not used unless xQueueReceive() returns pdTRUE. */
+	{
+		#if ( INCLUDE_xTimerPendFunctionCall == 1 )
+		{
+			/* Negative commands are pended function calls rather than timer
+			commands. */
+			if( xMessage.xMessageID < ( BaseType_t ) 0 )
+			{
+				const CallbackParameters_t * const pxCallback = &( xMessage.u.xCallbackParameters );
+
+				/* The timer uses the xCallbackParameters member to request a
+				callback be executed.  Check the callback is not NULL. */
+				configASSERT( pxCallback );
+
+				/* Call the function. */
+				pxCallback->pxCallbackFunction( pxCallback->pvParameter1, pxCallback->ulParameter2 );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+		}
+		#endif /* INCLUDE_xTimerPendFunctionCall */
+
+		/* Commands that are positive are timer commands rather than pended
+		function calls. */
+		if( xMessage.xMessageID >= ( BaseType_t ) 0 )
+		{
+			/* The messages uses the xTimerParameters member to work on a
+			software timer. */
+			pxTimer = xMessage.u.xTimerParameters.pxTimer;
+
+			if( listIS_CONTAINED_WITHIN( NULL, &( pxTimer->xTimerListItem ) ) == pdFALSE )
+			{
+				/* The timer is in a list, remove it. */
+				( void ) uxListRemove( &( pxTimer->xTimerListItem ) );
+			}
+			else
+			{
+				mtCOVERAGE_TEST_MARKER();
+			}
+
+			traceTIMER_COMMAND_RECEIVED( pxTimer, xMessage.xMessageID, xMessage.u.xTimerParameters.xMessageValue );
+
+			/* In this case the xTimerListsWereSwitched parameter is not used, but
+			it must be present in the function call.  prvSampleTimeNow() must be
+			called after the message is received from xTimerQueue so there is no
+			possibility of a higher priority task adding a message to the message
+			queue with a time that is ahead of the timer daemon task (because it
+			pre-empted the timer daemon task after the xTimeNow value was set). */
+			xTimeNow = prvSampleTimeNow( &xTimerListsWereSwitched );
+
+			switch( xMessage.xMessageID )
+			{
+				case tmrCOMMAND_START :
+			    case tmrCOMMAND_START_FROM_ISR :
+			    case tmrCOMMAND_RESET :
+			    case tmrCOMMAND_RESET_FROM_ISR :
+				case tmrCOMMAND_START_DONT_TRACE :
+					/* Start or restart a timer. */
+					if( prvInsertTimerInActiveList( pxTimer,  xMessage.u.xTimerParameters.xMessageValue + pxTimer->xTimerPeriodInTicks, xTimeNow, xMessage.u.xTimerParameters.xMessageValue ) != pdFALSE )
+					{
+						/* The timer expired before it was added to the active
+						timer list.  Process it now. */
+						pxTimer->pxCallbackFunction( ( TimerHandle_t ) pxTimer );
+						traceTIMER_EXPIRED( pxTimer );
+
+						if( pxTimer->uxAutoReload == ( UBaseType_t ) pdTRUE )
+						{
+							xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START_DONT_TRACE, xMessage.u.xTimerParameters.xMessageValue + pxTimer->xTimerPeriodInTicks, NULL, tmrNO_DELAY );
+							configASSERT( xResult );
+							( void ) xResult;
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					else
+					{
+						mtCOVERAGE_TEST_MARKER();
+					}
+					break;
+
+				case tmrCOMMAND_STOP :
+				case tmrCOMMAND_STOP_FROM_ISR :
+					/* The timer has already been removed from the active list.
+					There is nothing to do here. */
+					break;
+
+				case tmrCOMMAND_CHANGE_PERIOD :
+				case tmrCOMMAND_CHANGE_PERIOD_FROM_ISR :
+					pxTimer->xTimerPeriodInTicks = xMessage.u.xTimerParameters.xMessageValue;
+					configASSERT( ( pxTimer->xTimerPeriodInTicks > 0 ) );
+
+					/* The new period does not really have a reference, and can
+					be longer or shorter than the old one.  The command time is
+					therefore set to the current time, and as the period cannot
+					be zero the next expiry time can only be in the future,
+					meaning (unlike for the xTimerStart() case above) there is
+					no fail case that needs to be handled here. */
+					( void ) prvInsertTimerInActiveList( pxTimer, ( xTimeNow + pxTimer->xTimerPeriodInTicks ), xTimeNow, xTimeNow );
+					break;
+
+				case tmrCOMMAND_DELETE :
+					/* The timer has already been removed from the active list,
+					just free up the memory if the memory was dynamically
+					allocated. */
+					#if( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 0 ) )
+					{
+						/* The timer can only have been allocated dynamically -
+						free it again. */
+						vPortFree( pxTimer );
+					}
+					#elif( ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) && ( configSUPPORT_STATIC_ALLOCATION == 1 ) )
+					{
+						/* The timer could have been allocated statically or
+						dynamically, so check before attempting to free the
+						memory. */
+						if( pxTimer->ucStaticallyAllocated == ( uint8_t ) pdFALSE )
+						{
+							vPortFree( pxTimer );
+						}
+						else
+						{
+							mtCOVERAGE_TEST_MARKER();
+						}
+					}
+					#endif /* configSUPPORT_DYNAMIC_ALLOCATION */
+					break;
+
+				default	:
+					/* Don't expect to get here. */
+					break;
+			}
+		}
+	}
+}
+/*-----------------------------------------------------------*/
+
+static void prvSwitchTimerLists( void )
+{
+TickType_t xNextExpireTime, xReloadTime;
+List_t *pxTemp;
+Timer_t *pxTimer;
+BaseType_t xResult;
+
+	/* The tick count has overflowed.  The timer lists must be switched.
+	If there are any timers still referenced from the current timer list
+	then they must have expired and should be processed before the lists
+	are switched. */
+	while( listLIST_IS_EMPTY( pxCurrentTimerList ) == pdFALSE )
+	{
+		xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );
+
+		/* Remove the timer from the list. */
+		pxTimer = ( Timer_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxCurrentTimerList );
+		( void ) uxListRemove( &( pxTimer->xTimerListItem ) );
+		traceTIMER_EXPIRED( pxTimer );
+
+		/* Execute its callback, then send a command to restart the timer if
+		it is an auto-reload timer.  It cannot be restarted here as the lists
+		have not yet been switched. */
+		pxTimer->pxCallbackFunction( ( TimerHandle_t ) pxTimer );
+
+		if( pxTimer->uxAutoReload == ( UBaseType_t ) pdTRUE )
+		{
+			/* Calculate the reload value, and if the reload value results in
+			the timer going into the same timer list then it has already expired
+			and the timer should be re-inserted into the current list so it is
+			processed again within this loop.  Otherwise a command should be sent
+			to restart the timer to ensure it is only inserted into a list after
+			the lists have been swapped. */
+			xReloadTime = ( xNextExpireTime + pxTimer->xTimerPeriodInTicks );
+			if( xReloadTime > xNextExpireTime )
+			{
+				listSET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ), xReloadTime );
+				listSET_LIST_ITEM_OWNER( &( pxTimer->xTimerListItem ), pxTimer );
+				vListInsert( pxCurrentTimerList, &( pxTimer->xTimerListItem ) );
+			}
+			else
+			{
+				xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START_DONT_TRACE, xNextExpireTime, NULL, tmrNO_DELAY );
+				configASSERT( xResult );
+				( void ) xResult;
+			}
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+
+	pxTemp = pxCurrentTimerList;
+	pxCurrentTimerList = pxOverflowTimerList;
+	pxOverflowTimerList = pxTemp;
+}
+/*-----------------------------------------------------------*/
+
+static void prvCheckForValidListAndQueue( void )
+{
+	/* Check that the list from which active timers are referenced, and the
+	queue used to communicate with the timer service, have been
+	initialised. */
+	taskENTER_CRITICAL();
+	{
+		if( xTimerQueue == NULL )
+		{
+			vListInitialise( &xActiveTimerList1 );
+			vListInitialise( &xActiveTimerList2 );
+			pxCurrentTimerList = &xActiveTimerList1;
+			pxOverflowTimerList = &xActiveTimerList2;
+
+			#if( configSUPPORT_STATIC_ALLOCATION == 1 )
+			{
+				/* The timer queue is allocated statically in case
+				configSUPPORT_DYNAMIC_ALLOCATION is 0. */
+				static StaticQueue_t xStaticTimerQueue;
+				static uint8_t ucStaticTimerQueueStorage[ configTIMER_QUEUE_LENGTH * sizeof( DaemonTaskMessage_t ) ];
+
+				xTimerQueue = xQueueCreateStatic( ( UBaseType_t ) configTIMER_QUEUE_LENGTH, sizeof( DaemonTaskMessage_t ), &( ucStaticTimerQueueStorage[ 0 ] ), &xStaticTimerQueue );
+			}
+			#else
+			{
+				xTimerQueue = xQueueCreate( ( UBaseType_t ) configTIMER_QUEUE_LENGTH, sizeof( DaemonTaskMessage_t ) );
+			}
+			#endif
+
+			#if ( configQUEUE_REGISTRY_SIZE > 0 )
+			{
+				if( xTimerQueue != NULL )
+				{
+					vQueueAddToRegistry( xTimerQueue, "TmrQ" );
+				}
+				else
+				{
+					mtCOVERAGE_TEST_MARKER();
+				}
+			}
+			#endif /* configQUEUE_REGISTRY_SIZE */
+		}
+		else
+		{
+			mtCOVERAGE_TEST_MARKER();
+		}
+	}
+	taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+BaseType_t xTimerIsTimerActive( TimerHandle_t xTimer )
+{
+BaseType_t xTimerIsInActiveList;
+Timer_t *pxTimer = ( Timer_t * ) xTimer;
+
+	configASSERT( xTimer );
+
+	/* Is the timer in the list of active timers? */
+	taskENTER_CRITICAL();
+	{
+		/* Checking to see if it is in the NULL list in effect checks to see if
+		it is referenced from either the current or the overflow timer lists in
+		one go, but the logic has to be reversed, hence the '!'. */
+		xTimerIsInActiveList = ( BaseType_t ) !( listIS_CONTAINED_WITHIN( NULL, &( pxTimer->xTimerListItem ) ) );
+	}
+	taskEXIT_CRITICAL();
+
+	return xTimerIsInActiveList;
+} /*lint !e818 Can't be pointer to const due to the typedef. */
+/*-----------------------------------------------------------*/
+
+void *pvTimerGetTimerID( const TimerHandle_t xTimer )
+{
+Timer_t * const pxTimer = ( Timer_t * ) xTimer;
+void *pvReturn;
+
+	configASSERT( xTimer );
+
+	taskENTER_CRITICAL();
+	{
+		pvReturn = pxTimer->pvTimerID;
+	}
+	taskEXIT_CRITICAL();
+
+	return pvReturn;
+}
+/*-----------------------------------------------------------*/
+
+void vTimerSetTimerID( TimerHandle_t xTimer, void *pvNewID )
+{
+Timer_t * const pxTimer = ( Timer_t * ) xTimer;
+
+	configASSERT( xTimer );
+
+	taskENTER_CRITICAL();
+	{
+		pxTimer->pvTimerID = pvNewID;
+	}
+	taskEXIT_CRITICAL();
+}
+/*-----------------------------------------------------------*/
+
+#if( INCLUDE_xTimerPendFunctionCall == 1 )
+
+	BaseType_t xTimerPendFunctionCallFromISR( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, BaseType_t *pxHigherPriorityTaskWoken )
+	{
+	DaemonTaskMessage_t xMessage;
+	BaseType_t xReturn;
+
+		/* Complete the message with the function parameters and post it to the
+		daemon task. */
+		xMessage.xMessageID = tmrCOMMAND_EXECUTE_CALLBACK_FROM_ISR;
+		xMessage.u.xCallbackParameters.pxCallbackFunction = xFunctionToPend;
+		xMessage.u.xCallbackParameters.pvParameter1 = pvParameter1;
+		xMessage.u.xCallbackParameters.ulParameter2 = ulParameter2;
+
+		xReturn = xQueueSendFromISR( xTimerQueue, &xMessage, pxHigherPriorityTaskWoken );
+
+		tracePEND_FUNC_CALL_FROM_ISR( xFunctionToPend, pvParameter1, ulParameter2, xReturn );
+
+		return xReturn;
+	}
+
+#endif /* INCLUDE_xTimerPendFunctionCall */
+/*-----------------------------------------------------------*/
+
+#if( INCLUDE_xTimerPendFunctionCall == 1 )
+
+	BaseType_t xTimerPendFunctionCall( PendedFunction_t xFunctionToPend, void *pvParameter1, uint32_t ulParameter2, TickType_t xTicksToWait )
+	{
+	DaemonTaskMessage_t xMessage;
+	BaseType_t xReturn;
+
+		/* This function can only be called after a timer has been created or
+		after the scheduler has been started because, until then, the timer
+		queue does not exist. */
+		configASSERT( xTimerQueue );
+
+		/* Complete the message with the function parameters and post it to the
+		daemon task. */
+		xMessage.xMessageID = tmrCOMMAND_EXECUTE_CALLBACK;
+		xMessage.u.xCallbackParameters.pxCallbackFunction = xFunctionToPend;
+		xMessage.u.xCallbackParameters.pvParameter1 = pvParameter1;
+		xMessage.u.xCallbackParameters.ulParameter2 = ulParameter2;
+
+		xReturn = xQueueSendToBack( xTimerQueue, &xMessage, xTicksToWait );
+
+		tracePEND_FUNC_CALL( xFunctionToPend, pvParameter1, ulParameter2, xReturn );
+
+		return xReturn;
+	}
+
+#endif /* INCLUDE_xTimerPendFunctionCall */
+/*-----------------------------------------------------------*/
+
+/* This entire source file will be skipped if the application is not configured
+to include software timer functionality.  If you want to include software timer
+functionality then ensure configUSE_TIMERS is set to 1 in FreeRTOSConfig.h. */
+#endif /* configUSE_TIMERS == 1 */
+
+
+
diff --git a/Program/XLLC/HARDWARE/LED/LED.c b/Program/XLLC/HARDWARE/LED/LED.c
new file mode 100644
index 0000000000000000000000000000000000000000..11342c43e6270280dd3764f2ea9c2146ec54dfff
--- /dev/null
+++ b/Program/XLLC/HARDWARE/LED/LED.c
@@ -0,0 +1,22 @@
+#include "LED.h"
+
+void LED_Init(void)
+{
+	GPIO_InitTypeDef GPIO_InitStructure;
+	
+	RCC_APB2PeriphClockCmd(LED0_GPIO_CLK,	ENABLE);
+	RCC_APB2PeriphClockCmd(LED1_GPIO_CLK,	ENABLE);
+	
+	GPIO_InitStructure.GPIO_Mode		=	GPIO_Mode_Out_PP;
+	GPIO_InitStructure.GPIO_Pin			=	LED0_GPIO_PIN;
+	GPIO_InitStructure.GPIO_Speed		=	GPIO_Speed_50MHz;
+	GPIO_Init(LED0_GPIO_PORT,			&	GPIO_InitStructure);
+	GPIO_SetBits(LED0_GPIO_PORT,			LED0_GPIO_PIN);
+	
+	GPIO_InitStructure.GPIO_Mode		=	GPIO_Mode_Out_PP;
+	GPIO_InitStructure.GPIO_Pin			=	LED1_GPIO_PIN;
+	GPIO_InitStructure.GPIO_Speed		=	GPIO_Speed_50MHz;
+	GPIO_Init(LED1_GPIO_PORT,			&	GPIO_InitStructure);
+	GPIO_SetBits(LED1_GPIO_PORT,			LED1_GPIO_PIN);
+}
+
diff --git a/Program/XLLC/HARDWARE/LED/LED.h b/Program/XLLC/HARDWARE/LED/LED.h
new file mode 100644
index 0000000000000000000000000000000000000000..17b345b409248f31e4364780b06f1f9e6e0fba45
--- /dev/null
+++ b/Program/XLLC/HARDWARE/LED/LED.h
@@ -0,0 +1,20 @@
+#ifndef __LED_H
+#define __LED_H
+
+#include "sys.h"
+
+#define LED0_GPIO_PIN		GPIO_Pin_5
+#define LED0_GPIO_PORT		GPIOB
+#define LED0_GPIO_CLK		RCC_APB2Periph_GPIOB
+
+#define LED1_GPIO_PIN		GPIO_Pin_5
+#define LED1_GPIO_PORT		GPIOE
+#define LED1_GPIO_CLK		RCC_APB2Periph_GPIOE
+
+#define LED0 PBout(5)
+#define LED1 PEout(5)
+
+void LED_Init(void);
+
+#endif
+
diff --git a/Program/XLLC/OBJ/ExtDll.iex b/Program/XLLC/OBJ/ExtDll.iex
new file mode 100644
index 0000000000000000000000000000000000000000..b661f48f48be731ebd5dfcfb54bb7d1dffef7bb5
--- /dev/null
+++ b/Program/XLLC/OBJ/ExtDll.iex
@@ -0,0 +1,2 @@
+[EXTDLL]
+Count=0
diff --git a/Program/XLLC/OBJ/GCSLC_FreeRTOS.dep b/Program/XLLC/OBJ/GCSLC_FreeRTOS.dep
new file mode 100644
index 0000000000000000000000000000000000000000..6d8f1ae5dca1481a060e949223f2bcf871516fb3
--- /dev/null
+++ b/Program/XLLC/OBJ/GCSLC_FreeRTOS.dep
@@ -0,0 +1,1335 @@
+Dependencies for Project 'GCSLC', Target 'FreeRTOS': (DO NOT MODIFY !)
+CompilerVersion: 5060960::V5.06 update 7 (build 960)::ARMCC
+F (.\main.c)(0x60F80FA9)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\main.o --omf_browse ..\obj\main.crf --depend ..\obj\main.d)
+I (include.h)(0x60F80FA9)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\task.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
+I (..\TASK\Init_task\Init_task.h)(0x60F80B3C)
+I (..\USER\include.h)(0x60F80FA9)
+I (..\HARDWARE\LED\LED.h)(0x60462D42)
+F (.\stm32f10x_it.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_it.o --omf_browse ..\obj\stm32f10x_it.crf --depend ..\obj\stm32f10x_it.d)
+I (stm32f10x_it.h)(0x60F7D876)
+I (stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (system_stm32f10x.h)(0x60F7D876)
+I (stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (.\system_stm32f10x.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\system_stm32f10x.o --omf_browse ..\obj\system_stm32f10x.crf --depend ..\obj\system_stm32f10x.d)
+I (stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (system_stm32f10x.h)(0x60F7D876)
+I (stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\TASK\Init_task\Init_task.c)(0x60F80DDF)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\init_task.o --omf_browse ..\obj\init_task.crf --depend ..\obj\init_task.d)
+I (..\TASK\Init_task\Init_task.h)(0x60F80B3C)
+I (..\USER\include.h)(0x60F80FA9)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\task.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
+I (..\HARDWARE\LED\LED.h)(0x60462D42)
+I (..\TASK\LED_task\LED_task.h)(0x60F80DDF)
+F (..\TASK\LED_task\LED_task.c)(0x60F80E17)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\led_task.o --omf_browse ..\obj\led_task.crf --depend ..\obj\led_task.d)
+I (..\TASK\LED_task\LED_task.h)(0x60F80DDF)
+I (..\USER\include.h)(0x60F80FA9)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\task.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
+I (..\TASK\Init_task\Init_task.h)(0x60F80B3C)
+I (..\HARDWARE\LED\LED.h)(0x60462D42)
+F (..\HARDWARE\LED\LED.c)(0x60462D42)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\led.o --omf_browse ..\obj\led.crf --depend ..\obj\led.d)
+I (..\HARDWARE\LED\LED.h)(0x60462D42)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\SYSTEM\sys\sys.c)(0x60F81129)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\sys.o --omf_browse ..\obj\sys.crf --depend ..\obj\sys.d)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\task.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
+F (..\SYSTEM\usart\usart.c)(0x60F80608)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\usart.o --omf_browse ..\obj\usart.crf --depend ..\obj\usart.d)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+F (..\CORE\core_cm3.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\core_cm3.o --omf_browse ..\obj\core_cm3.crf --depend ..\obj\core_cm3.d)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+F (..\CORE\startup_stm32f10x_hd.s)(0x60F7D876)(--cpu Cortex-M3 -g --apcs=interwork 

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

--pd "__UVISION_VERSION SETA 533" --pd "STM32F10X_HD SETA 1"

--list ..\obj\startup_stm32f10x_hd.lst --xref -o ..\obj\startup_stm32f10x_hd.o --depend ..\obj\startup_stm32f10x_hd.d)
+F (..\STM32F10x_FWLib\src\misc.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\misc.o --omf_browse ..\obj\misc.crf --depend ..\obj\misc.d)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_gpio.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_gpio.o --omf_browse ..\obj\stm32f10x_gpio.crf --depend ..\obj\stm32f10x_gpio.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_dbgmcu.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_dbgmcu.o --omf_browse ..\obj\stm32f10x_dbgmcu.crf --depend ..\obj\stm32f10x_dbgmcu.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_rcc.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_rcc.o --omf_browse ..\obj\stm32f10x_rcc.crf --depend ..\obj\stm32f10x_rcc.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_usart.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_usart.o --omf_browse ..\obj\stm32f10x_usart.crf --depend ..\obj\stm32f10x_usart.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_adc.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_adc.o --omf_browse ..\obj\stm32f10x_adc.crf --depend ..\obj\stm32f10x_adc.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_bkp.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_bkp.o --omf_browse ..\obj\stm32f10x_bkp.crf --depend ..\obj\stm32f10x_bkp.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_can.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_can.o --omf_browse ..\obj\stm32f10x_can.crf --depend ..\obj\stm32f10x_can.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_cec.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_cec.o --omf_browse ..\obj\stm32f10x_cec.crf --depend ..\obj\stm32f10x_cec.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_crc.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_crc.o --omf_browse ..\obj\stm32f10x_crc.crf --depend ..\obj\stm32f10x_crc.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_dac.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_dac.o --omf_browse ..\obj\stm32f10x_dac.crf --depend ..\obj\stm32f10x_dac.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_dma.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_dma.o --omf_browse ..\obj\stm32f10x_dma.crf --depend ..\obj\stm32f10x_dma.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_exti.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_exti.o --omf_browse ..\obj\stm32f10x_exti.crf --depend ..\obj\stm32f10x_exti.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_flash.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_flash.o --omf_browse ..\obj\stm32f10x_flash.crf --depend ..\obj\stm32f10x_flash.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_fsmc.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_fsmc.o --omf_browse ..\obj\stm32f10x_fsmc.crf --depend ..\obj\stm32f10x_fsmc.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_i2c.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_i2c.o --omf_browse ..\obj\stm32f10x_i2c.crf --depend ..\obj\stm32f10x_i2c.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_iwdg.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_iwdg.o --omf_browse ..\obj\stm32f10x_iwdg.crf --depend ..\obj\stm32f10x_iwdg.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_pwr.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_pwr.o --omf_browse ..\obj\stm32f10x_pwr.crf --depend ..\obj\stm32f10x_pwr.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_rtc.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_rtc.o --omf_browse ..\obj\stm32f10x_rtc.crf --depend ..\obj\stm32f10x_rtc.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_sdio.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_sdio.o --omf_browse ..\obj\stm32f10x_sdio.crf --depend ..\obj\stm32f10x_sdio.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_spi.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_spi.o --omf_browse ..\obj\stm32f10x_spi.crf --depend ..\obj\stm32f10x_spi.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_tim.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_tim.o --omf_browse ..\obj\stm32f10x_tim.crf --depend ..\obj\stm32f10x_tim.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\STM32F10x_FWLib\src\stm32f10x_wwdg.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\stm32f10x_wwdg.o --omf_browse ..\obj\stm32f10x_wwdg.crf --depend ..\obj\stm32f10x_wwdg.d)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+F (..\FreeRTOS\croutine.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\croutine.o --omf_browse ..\obj\croutine.crf --depend ..\obj\croutine.d)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\task.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
+I (..\FreeRTOS\include\croutine.h)(0x60F7D876)
+F (..\FreeRTOS\event_groups.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\event_groups.o --omf_browse ..\obj\event_groups.crf --depend ..\obj\event_groups.d)
+I (C:\Keil_v5\ARM\ARMCC\include\stdlib.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\task.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
+I (..\FreeRTOS\include\timers.h)(0x60F7D876)
+I (..\FreeRTOS\include\event_groups.h)(0x60F7D876)
+F (..\FreeRTOS\list.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\list.o --omf_browse ..\obj\list.crf --depend ..\obj\list.d)
+I (C:\Keil_v5\ARM\ARMCC\include\stdlib.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
+F (..\FreeRTOS\queue.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\queue.o --omf_browse ..\obj\queue.crf --depend ..\obj\queue.d)
+I (C:\Keil_v5\ARM\ARMCC\include\stdlib.h)(0x5E8E2EB2)
+I (C:\Keil_v5\ARM\ARMCC\include\string.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\task.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
+I (..\FreeRTOS\include\queue.h)(0x60F7D876)
+F (..\FreeRTOS\tasks.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\tasks.o --omf_browse ..\obj\tasks.crf --depend ..\obj\tasks.d)
+I (C:\Keil_v5\ARM\ARMCC\include\stdlib.h)(0x5E8E2EB2)
+I (C:\Keil_v5\ARM\ARMCC\include\string.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\task.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
+I (..\FreeRTOS\include\timers.h)(0x60F7D876)
+I (..\FreeRTOS\include\StackMacros.h)(0x60F7D876)
+F (..\FreeRTOS\timers.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\timers.o --omf_browse ..\obj\timers.crf --depend ..\obj\timers.d)
+I (C:\Keil_v5\ARM\ARMCC\include\stdlib.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\task.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
+I (..\FreeRTOS\include\queue.h)(0x60F7D876)
+I (..\FreeRTOS\include\timers.h)(0x60F7D876)
+F (..\FreeRTOS\portable\MemMang\heap_4.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\heap_4.o --omf_browse ..\obj\heap_4.crf --depend ..\obj\heap_4.d)
+I (C:\Keil_v5\ARM\ARMCC\include\stdlib.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\task.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
+F (..\FreeRTOS\portable\RVDS\ARM_CM3\port.c)(0x60F7D876)(-c --cpu Cortex-M3 -g -O2 --apcs=interwork --split_sections -I ..\USER -I ..\CORE -I ..\STM32F10x_FWLib\inc -I ..\SYSTEM\sys -I ..\SYSTEM\usart -I ..\FreeRTOS\include -I ..\FreeRTOS\portable\RVDS\ARM_CM3 -I ..\TASK\Init_task -I ..\HARDWARE\LED -I ..\TASK\LED_task

-IC:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include

-IC:\Keil_v5\ARM\CMSIS\Include

-D__UVISION_VERSION="533" -DSTM32F10X_HD -DSTM32F10X_HD -DUSE_STDPERIPH_DRIVER

-o ..\obj\port.o --omf_browse ..\obj\port.crf --depend ..\obj\port.d)
+I (..\FreeRTOS\include\FreeRTOS.h)(0x60F7D876)
+I (C:\Keil_v5\ARM\ARMCC\include\stddef.h)(0x5E8E2EB2)
+I (C:\Keil_v5\ARM\ARMCC\include\stdint.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\FreeRTOSConfig.h)(0x60F7D876)
+I (..\SYSTEM\sys\sys.h)(0x60F810A9)
+I (..\USER\stm32f10x.h)(0x60F7D876)
+I (..\CORE\core_cm3.h)(0x60F7D876)
+I (..\USER\system_stm32f10x.h)(0x60F7D876)
+I (..\USER\stm32f10x_conf.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_adc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_bkp.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_can.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_cec.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_crc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dac.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_dma.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_exti.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_flash.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_gpio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_i2c.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_pwr.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rcc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_rtc.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_sdio.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_spi.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_tim.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_usart.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h)(0x60F7D876)
+I (..\STM32F10x_FWLib\inc\misc.h)(0x60F7D876)
+I (..\SYSTEM\usart\usart.h)(0x60F80B3C)
+I (C:\Keil_v5\ARM\ARMCC\include\stdio.h)(0x5E8E2EB2)
+I (..\FreeRTOS\include\projdefs.h)(0x60F7D876)
+I (..\FreeRTOS\include\portable.h)(0x60F7D876)
+I (..\FreeRTOS\include\deprecated_definitions.h)(0x60F7D876)
+I (..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h)(0x60F7D876)
+I (..\FreeRTOS\include\mpu_wrappers.h)(0x60F7D876)
+I (..\FreeRTOS\include\task.h)(0x60F7D876)
+I (..\FreeRTOS\include\list.h)(0x60F7D876)
diff --git a/Program/XLLC/OBJ/LED.axf b/Program/XLLC/OBJ/LED.axf
new file mode 100644
index 0000000000000000000000000000000000000000..6c388a7c25bf83a6987369a1af307438a3eb996d
Binary files /dev/null and b/Program/XLLC/OBJ/LED.axf differ
diff --git a/Program/XLLC/OBJ/LED.build_log.htm b/Program/XLLC/OBJ/LED.build_log.htm
new file mode 100644
index 0000000000000000000000000000000000000000..97bf33b92d07eed64fbe16de24af05d456f27818
--- /dev/null
+++ b/Program/XLLC/OBJ/LED.build_log.htm
@@ -0,0 +1,46 @@
+
+
+
+
µVision Build Log

+
Tool Versions:

+IDE-Version: ¦ÌVision V5.33.0.0
+Copyright (C) 2020 ARM Ltd and ARM Germany GmbH. All rights reserved.
+License Information: xx xx, xx, LIC=47GU5-GZTDA-8TF3P-MD4L3-8AHN7-K6DRK
+ 
+Tool Versions:
+Toolchain:       MDK-ARM Plus  Version: 5.33.0.0
+Toolchain Path:  C:\Keil_v5\ARM\ARMCC\Bin
+C Compiler:      Armcc.exe V5.06 update 7 (build 960)
+Assembler:       Armasm.exe V5.06 update 7 (build 960)
+Linker/Locator:  ArmLink.exe V5.06 update 7 (build 960)
+Library Manager: ArmAr.exe V5.06 update 7 (build 960)
+Hex Converter:   FromElf.exe V5.06 update 7 (build 960)
+CPU DLL:         SARMCM3.DLL V5.33.0.0
+Dialog DLL:      DARMSTM.DLL V1.68.0.0
+Target DLL:      STLink\ST-LINKIII-KEIL_SWO.dll V3.0.8.0
+Dialog DLL:      TARMSTM.DLL V1.66.0.0
+ 
+
Project:

+E:\Gitee\»úÆ÷ÈËЭ×÷ϵͳ\ÏÂλ»ú³ÌÐò\lower-computer-program\GCSLC\USER\GCSLC.uvprojx
+Project File Date:  07/21/2021
+
+
Output:

+*** Using Compiler 'V5.06 update 7 (build 960)', folder: 'C:\Keil_v5\ARM\ARMCC\Bin'
+Build target 'FreeRTOS'
+"..\OBJ\LED.axf" - 0 Error(s), 0 Warning(s).
+
+
Software Packages used:

+
+Package Vendor: Keil
+                http://www.keil.com/pack/Keil.STM32F1xx_DFP.2.3.0.pack
+                Keil.STM32F1xx_DFP.2.3.0
+                STMicroelectronics STM32F1 Series Device Support, Drivers and Examples
+
+
Collection of Component include folders:

+  C:\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include
+
+
Collection of Component Files used:

+Build Time Elapsed:  00:00:01
+

+
+
diff --git a/Program/XLLC/OBJ/LED.hex b/Program/XLLC/OBJ/LED.hex
new file mode 100644
index 0000000000000000000000000000000000000000..9ae3c56f06ec91f9057970b9094f529ea0e53eb9
--- /dev/null
+++ b/Program/XLLC/OBJ/LED.hex
@@ -0,0 +1,686 @@
+:020000040800F2
+:10000000285B0020750200082F090008E10700089E
+:100010002D0900083D070008FD0C00080000000045
+:10002000000000000000000000000000DD010008EA
+:100030003F0700080000000021020008FD0A000838
+:100040008F0200088F0200088F0200088F0200084C
+:100050008F0200088F0200088F0200088F0200083C
+:100060008F0200088F0200088F0200088F0200082C
+:100070008F0200088F0200088F0200088F0200081C
+:100080008F0200088F0200088F0200088F0200080C
+:100090008F0200088F0200088F0200088F020008FC
+:1000A0008F0200088F0200088F0200088F020008EC
+:1000B0008F0200088F0200088F0200088F020008DC
+:1000C0008F0200088F0200088F0200088F020008CC
+:1000D0008F020008610B00088F0200088F020008E1
+:1000E0008F0200088F0200088F0200088F020008AC
+:1000F0008F0200088F0200088F0200088F0200089C
+:100100008F0200088F0200088F0200088F0200088B
+:100110008F0200088F0200088F0200088F0200087B
+:100120008F0200088F0200088F0200088F0200086B
+:1001300000F002F800F042F80AA090E8000C8244B7
+:100140008344AAF10107DA4501D100F037F8AFF294
+:10015000090EBAE80F0013F0010F18BFFB1A43F0A5
+:10016000010318477428000094280000103A24BFA7
+:1001700078C878C1FAD8520724BF30C830C144BF0C
+:1001800004680C607047000000230024002500264E
+:10019000103A28BF78C1FBD8520728BF30C148BFEA
+:1001A0000B607047642900F0F180732900F0FE8134
+:1001B000002070471FB51FBD10B510BD00F08BFAB1
+:1001C0001146FFF7F7FF00F0A7FD00F0A9FA03B40E
+:1001D000FFF7F2FF03BC00F092FD0000224B19680C
+:1001E0000868B0E8F00F80F30988BFF36F8F4FF015
+:1001F000000080F311884EF00D0E704700000000E3
+:1002000006480068006880F3088862B661B6BFF3EC
+:100210004F8FBFF36F8F00DF00BF00BF08ED00E01E
+:10022000EFF30980BFF36F8F0F4B1A6820E9F00FCF
+:10023000106008B54FF0500080F31188BFF34F8F66
+:10024000BFF36F8F01F0E6FD4FF0000080F31188DF
+:10025000BDE8084019680868B0E8F00F80F3098825
+:10026000BFF36F8F704700BF3C000020EFF30580A5
+:10027000704700000948804709480047FEE7FEE74D
+:10028000FEE7FEE7FEE7FEE7FEE7FEE7FEE7FEE746
+:1002900004480549054A064B70470000110B000849
+:1002A0003101000828550020285B00202857002035
+:1002B00028570020704700000FB4044910B503AA66
+:1002C000029800F077F910BC5DF814FB24000020C0
+:1002D0002DE9F0410E460446002020622046E168E8
+:1002E000884730B3252805D0D4E901219047206AFA
+:1002F000401CF2E7E168204600278847050018D037
+:10030000A5F14100192802D820354FF40067324684
+:10031000294620462760FFF745FF40B1012804D059
+:10032000F61D26F007060836D8E7361DD6E728461C
+:10033000DAE7206ABDE8F08170B50C460546012A6F
+:1003400005D02878800600D5EA69002302E0012361
+:1003500005E05B1C934202D2E05C0028F9D1A86959
+:10036000E618C01AA861286A184428622846AFF324
+:10037000008004E0D5E9012114F8010B9047B44254
+:10038000F8D32846AFF3008070BD00002DE9F0419E
+:100390000646002410687529314616A510D0AFF323
+:1003A0000080002802DA404213A507E031688A077E
+:1003B00001D512A502E0490704D511A5012401E0E9
+:1003C000AFF3008000210A2206F1240709E0B0FB08
+:1003D000F2FCB0FBF2F302FB1C00303078541846FC
+:1003E000491C0028F3D123462A463046BDE8F04197
+:1003F00000F059B8000000002D0000002B000000A4
+:1004000020000000032A40F2308010F0030C00F0BE
+:10041000158011F8013BBCF1020F624498BF11F83E
+:1004200001CB00F8013B38BF11F8013BA2F10402F7
+:1004300098BF00F801CB38BF00F8013B11F003036F
+:1004400000F0CA80083AC0F0088051F8043B083A2E
+:1004500051F804CBA0E80810F5E7121D5CBF51F875
+:10046000043B40F8043BAFF30080D20724BF11F8EF
+:10047000013B11F801CB48BF11F8012B24BF00F854
+:10048000013B00F801CB48BF00F8012B704702F098
+:10049000FF0343EA032242EA024200F0D1B8704768
+:1004A0007047704770472DE9F0470D4699469246D0
+:1004B000044600F124080168880604D5E06921F0AB
+:1004C0001001216000E00120A84201DD471B00E08F
+:1004D0000027A1697A1902EB0900081AA0612078A7
+:1004E000C00602D42046AFF30080002608E0D4E91D
+:1004F00001211AF806009047206A401C761C2062F1
+:100500004E45F4DB2078C0060AD52046AFF30080C4
+:1005100006E0D4E9012130209047206A401C206287
+:10052000381EA7F10107F4DC07E0D4E9012118F82F
+:1005300005009047206A401C2062281EA5F1010595
+:10054000F3DC2046AFF300802078000602D50220BD
+:10055000BDE8F0870120FBE701694A1C02610878C9
+:10056000704700B58FB0CDE90131002105910549F3
+:100570007944CDE9031011466846FFF7A9FE0FB094
+:1005800000BD0000E5FFFFFF10B5436913B1AFF3F5
+:10059000008001E0FFF7D0FE012010BD127800F1CD
+:1005A00024010A7000224A700122EDE711684FF021
+:1005B000FF32E9E7074B70B50D467B44FFF7D1FFEB
+:1005C0000446284600F05CF810B14FF0FF3070BDD3
+:1005D000204670BD4307000010B5203AC0F00B80E4
+:1005E000B1E81850203AA0E81850B1E81850A0E837
+:1005F0001850BFF4F5AF5FEA027C24BFB1E8185091
+:10060000A0E8185044BF18C918C0BDE810405FEA00
+:10061000827C24BF51F8043B40F8043B08BF70477C
+:10062000D20728BF31F8023B48BF11F8012B28BF81
+:1006300020F8023B48BF00F8012B70474FF0000242
+:100640000429C0F0128010F0030C00F01F80CCF1E0
+:10065000040CBCF1020F18BF00F8012BA8BF20F852
+:10066000022BA1EB0C0100F011B85FEAC17C24BFA2
+:1006700000F8012B00F8012B48BF00F8012B704750
+:10068000007B00F0800070474FF0000200B5134679
+:1006900094469646203922BFA0E80C50A0E80C50A2
+:1006A000B1F12001BFF4F7AF090728BFA0E80C5053
+:1006B00048BF0CC05DF804EB890028BF40F8042B4C
+:1006C00008BF704748BF20F8022B11F0804F18BFB9
+:1006D00000F8012B7047754600F02CF8AE46050077
+:1006E0006946534620F00700854618B020B5FFF74D
+:1006F000CFFDBDE820404FF000064FF000074FF05F
+:1007000000084FF0000B21F00701AC46ACE8C0092F
+:10071000ACE8C009ACE8C009ACE8C0098D46704738
+:1007200010B50446AFF300802046BDE81040FFF747
+:100730004EBD000000487047C4540020FEE77047DB
+:10074000F0B5CC78002204F00F03E40601D58C78D4
+:1007500023430C784FF00F0C14F0FF0F4FF0010EF5
+:100760001BD005680E880EFA02F42640A64210D16E
+:1007700096000CFA06F725EA070703FA06F5CE7885
+:100780003D43282E02D0482E02D002E0446100E012
+:100790000461521C082AE5D305600A88FF2A1CD987
+:1007A0004468002202F108060EFA06F50E882E4073
+:1007B000AE420ED196000CFA06F7BC4303FA06F7D8
+:1007C000CE783C43282E00D14561CE78482E00D10A
+:1007D0000561521C082AE5D34460F0BD01617047F1
+:1007E000FEE710B54FF4407000F0D4F84FF4E1305C
+:1007F00000F084FFBDE8104000F040B81CB5074988
+:100800000120CDE900010023802205A1074801F065
+:100810005BFEBDE81C4001F0ABBA000014000020F4
+:1008200073746172745F7461736B0000DD1600088D
+:100830000025074C01264FF4FA77C820C4F89451DC
+:1008400001F036F93846C4F8946101F031F9F4E763
+:10085000008021420025084C4FF4967701264FF482
+:100860002F783846C4F8945101F022F94046C4F874
+:10087000946101F01DF9F4E700002342F8B501216D
+:10088000082000F091F80121402000F08DF810269A
+:100890008DF8036020240F4FADF8004003258DF83C
+:1008A000025069463846FFF74BFF20213846FFF7D4
+:1008B00095FF8DF80360ADF80040074C8DF80250AD
+:1008C00069462046FFF73CFF20212046FFF786FFC0
+:1008D000F8BD0000000C0140001801401CB50A489A
+:1008E0000124CDE900400023802208A10A4801F03C
+:1008F000EBFD05480023001DCDE90040802207A143
+:10090000094801F0E1FD1CBD180000204C454430B1
+:100910005F7461736B000000310800084C4544317E
+:100920005F7461736B00000055080008FEE77047B4
+:1009300030B50F23C27801780125F2B1144A12684C
+:1009400001F1E02102F4E062C2F5E062120AC2F1B4
+:100950000404D3404278A24084781C40144322010E
+:1009600081F80024007800F01F018D4040098000CC
+:1009700000F1E020C0F8005130BD01F01F008540BB
+:100980004809800000F1E020C0F8805130BD00002F
+:100990000CED00E00249084302490860704700007E
+:1009A0000000FA050CED00E0044A0029916901D02D
+:1009B000014300E081439161704700000010024054
+:1009C00030B5204A5168204B11F00C0103D00429A6
+:1009D00001D0082901D0036012E05168536801F486
+:1009E00070114FF0020413F4803F04EB914102D0E8
+:1009F00053689B0301D5154B00E0134B594301602D
+:100A000051680F2303EA1111114B5C5C0168E1404E
+:100A100041605468072505EA14241C5D21FA04F49A
+:100A20008460546805EAD4241B5DD940C1605268D3
+:100A3000032303EA9232064B1B1F9A5CB1FBF2F1CF
+:100A4000016130BD0010024000127A0000093D0033
+:100A50002C0000200CB5002226480092019201686B
+:100A600041F4803101604FF4A063016801F400316A
+:100A700001910099491C0091019911B9009999427D
+:100A8000F3D10168890333D5012101911A490A681C
+:100A900042F010020A600A6822F003020A600A6843
+:100AA00042F002020A604168416041684160416869
+:100AB00041F480614160416821F47C1141604168EA
+:100AC00041F4E8114160016841F080710160016802
+:100AD0008901FCD5416821F003014160416841F082
+:100AE000020141604168C1F381010229FAD10CBDC4
+:100AF00001920CBD001002400020024010B501F030
+:100B00000FFD012803D0BDE8104001F0FDB910BD74
+:100B10000F4810B5016841F00101016041680D4ABC
+:100B20001140416001680C4A11400160016821F4E4
+:100B300080210160416821F4FE0141604FF41F01F2
+:100B40008160FFF787FF05494FF00060086010BD26
+:100B5000001002400000FFF8FFFFF6FE08ED00E085
+:100B600070B5154C40F22551204600F035F80028AC
+:100B70000ED0204600F0BEF8104AC1B2108803041F
+:100B800006D444044FF0000306D50A2901D013808F
+:100B900070BD40F400400DE00D2909D0C0F30D04F4
+:100BA000074D401C80B229551080C728EFD870BD72
+:100BB00040F48040108070BD0038014020000020CB
+:100BC000B00000200029818902D041F4005101E0E9
+:100BD00021F400518181704770B501F01F05012695
+:100BE0000024C1F3421306FA05F2012B0FD0022BA9
+:100BF0000FD0838A4FEA11210088134206FA01F6CA
+:100C000000EA060001D000B10124204670BD8389AE
+:100C1000F0E7038AEEE710B5C1F3421301F01F04B9
+:100C20000121A140012B07D0022B07D01430002A4C
+:100C3000026805D00A4304E00C30F8E71030F6E70C
+:100C40008A43026010BD000030B50446008A85B0BA
+:100C50000D464CF6FF710840E98801432182A089C6
+:100C60004EF6F3110840A9882A8911436A89024384
+:100C70001143A181A08A4FF6FF410840A989014391
+:100C8000A1826846FFF79CFE1948844201D103986F
+:100C900000E00298A189090400EBC00101EB0010FB
+:100CA000296801D5490000E08900B0FBF1F0642219
+:100CB000B0FBF2F109010B096FF018056B4300EB73
+:100CC0008300A3891D044FF0320306D503EBC00057
+:100CD000B0FBF2F000F0070005E003EB0010B0FB02
+:100CE000F2F000F00F000843208105B030BD000095
+:100CF000003801408088C0F308007047FEE7704765
+:100D000004490A885206FCD5024AC1B2121D11805C
+:100D1000704700000038014010B5FFF762FDFFF793
+:100D20006DFD002010BD00002DE9F041184E0F466A
+:100D30000446F5683068001D00F030FD38B93068B1
+:100D400090F82C1001208840316981433161601C8A
+:100D500007D137B13168BDE8F0410E48091D00F0F8
+:100D600055BD30682C44AC424460316805D2B06B4C
+:100D7000BDE8F041091D00F031BD706B091D00F0A8
+:100D80002DFDB06A844200D2B462BDE8F08100005B
+:100D90003C000020880400202DE9F041054600F0C9
+:100DA00041FD2D4EB068401CB06030682B4F10B133
+:100DB000706930B32BE03560B068012827D100247A
+:100DC00004EB840007EB800000F0FAFC641C202C8C
+:100DD000F6D3234800F0F4FC2148143000F0F0FC76
+:100DE0001F48283000F0ECFC1D483C3000F0E8FCC7
+:100DF0001B48503000F0E4FC194870631430B063B5
+:100E000005E03068E96AC06A884200D83560706AD7
+:100E10000121401C70626864E86A326981401143B4
+:100E2000316100EB800007EB8000291D00F0EEFC33
+:100E300000F034FD706900280CD03068E96AC06A9F
+:100E4000884207D207494FF080500860BFF34F8FA8
+:100E5000BFF36F8FBDE8F0813C000020B801002097
+:100E60003804002004ED00E010B500F0DBFC0E4C6F
+:100E70002068A0B90D4800F0A3FC0C48143000F025
+:100E80009FFC0A48E06014302061002210210520F8
+:100E900001F050F8206010B105A100F0D5FDBDE8CB
+:100EA000104000F0FBBC0000780000209C040020F3
+:100EB000546D72510000000070B5124E124D1CE0CE
+:100EC00000F0A0FF306820B1002401F057FCA4B965
+:100ED00001E00124F9E700F0A5FCF068C468201DDA
+:100EE00000F05CFCA868401EA8606868401E68604E
+:100EF00000F0D4FC204600F052F868680028DFD1EA
+:100F000070BD0000740400203C00002030B4026C6E
+:100F10000B46002A0BD0C1681144C1604468A1424D
+:100F200001D30168C16030BC1846FFF76BBA30BC12
+:100F300070472DE9F041856B174604460026026C88
+:100F400082B1C7B1E068FFF75DFAE168206C091A69
+:100F5000E1602268914202D26168081AE060022FC3
+:100F600016D017E02068A8B9606801F061FB06465A
+:100F7000002060600EE0A068FFF744FA216CA068D2
+:100F80000844A0606168884204D32068A06001E042
+:100F900005B16D1E6D1CA5633046BDE8F08110B52E
+:100FA0000446006B00F0ACFC2046BDE8104000F0A9
+:100FB000A7BC000010484FF4A041420706D0C01D56
+:100FC0000D4920F00700411AC1F5A0410B4A00234A
+:100FD0000144C2E900030839103A21F00701116009
+:100FE0004B600B600B1AC0E9001393604FF0004098
+:100FF0005360D06070470000C40400209C000020B3
+:10100000074E4FF08054074DFFF756FF3068012818
+:10101000FAD92C60BFF34F8FBFF36F8FF4E7000056
+:10102000B801002004ED00E02DE9F047DDE9098476
+:101030000E461746824691009946089DA522206BD0
+:10104000FFF725FA6FF00301206B01EB87010844DD
+:1010500020F00707780705D040F22B3219A11EA017
+:10106000FFF72AF900202218315C82F83410315C35
+:1010700011B1401C1028F6D3002684F84360202DBF
+:1010800000D31F25E562C4E91356201D00F0A3FB21
+:1010900004F1180000F09FFB2461C5F12000646298
+:1010A000A061666584F858604A465146384600F0AB
+:1010B00003FB2060B8F1000F01D0C8F80040BDE884
+:1010C000F08700002E2E5C4672656552544F535CCB
+:1010D0007461736B732E63004572726F723A25737D
+:1010E0002C25640D0A00000030B5114900E01146BE
+:1010F0000A688242FBD34B685C18844203D1406883
+:1011000018444860084643681C18944209D1084CAA
+:10111000103C2468A24209D052681A4442600A680E
+:1011200012680260814200D0086030BD0460F9E7B7
+:101130009C00002070B5002441600B4D006191427D
+:1011400006D8D11A8269914206D2011D286907E0AA
+:101150009A4203D2994201D3012403E0011DE868B9
+:1011600000F03CFB204670BD7800002010B504461E
+:1011700000F058FBA06B20B1002400F08FFB20464C
+:1011800010BD0124F9E700002DE9F34100980F4656
+:101190000026846C2CB940F6CE1216A11AA0FFF7D7
+:1011A0008BF8A06BE16B884205D340F6CF1211A1FA
+:1011B00015A0FFF781F8A06BE16B88420CD294F97F
+:1011C00045503A4669462046FFF7B3FE0646681C7E
+:1011D00005D06D1C84F845503046BDE8FC81606A3E
+:1011E0000028F9D004F1240001F07CFA0028F3D0A3
+:1011F0000126F1E72E2E5C4672656552544F535C12
+:1012000071756575652E63004572726F723A25734C
+:101210002C25640D0A000000F8B5054614480E465A
+:10122000C068C068C468201D00F0B8FAE0690128F1
+:1012300017D1A0692B46411932462046FFF77AFFA5
+:1012400078B100200346014600902A46204601F06E
+:101250007BFB30B907494FF4027201F11800FFF728
+:101260002BF8616A01B02046BDE8F0400847000055
+:1012700078000020AC28000870B586B02F4E53E0EF
+:101280000198002806DADDE90301029A90470198E7
+:10129000002849DB039C606910B1201D00F07EFA34
+:1012A00005A800F0A7F8054601980A283CD2DFE817
+:1012B00000F00505053B273805053B270298A16985
+:1012C000034601442A462046FFF734FF00282BD06E
+:1012D000616A20468847E069012825D100200090F6
+:1012E0000298A169002342181946204601F02CFB00
+:1012F000D0B940F2213212A117A0FEF7DDFF13E0B2
+:101300000298A06128B94FF44E720DA112A0FEF709
+:10131000D3FFA0692B4641191A462046FFF70AFF62
+:1013200002E0204600F0ECFA00231A4601A93068DA
+:1013300000F03CFE0028A3D106B070BD780000206C
+:101340002E2E5C4672656552544F535C74696D6510
+:1013500072732E63000000004572726F723A25733B
+:101360002C25640D0A000000F8B50D46064600F075
+:1013700049FD684600F03EF80446009810B101F0BF
+:10138000FDF9F8BD1148ADB101690968D9B1002571
+:10139000311B2A46006800F069FB01F0EFF90028D4
+:1013A000EFD10B494FF080500860BFF34F8FBFF370
+:1013B0006F8FF8BDA642EBD801F0E0F92146304628
+:1013C000FFF72AFFF8BD0125E2E7000078000020C2
+:1013D00004ED00E00648416B096829B1416BC9681A
+:1013E000C9684968816270474FF0FF31FAE7000031
+:1013F0003C00002070B5054601F0A0F8064E0446FA
+:10140000B068844203D200F009F8012000E0002017
+:1014100028602046B46070BD78000020F8B5184EF2
+:1014200026E0C068C4680568201D00F0B7F9616A4D
+:1014300020468847E06901281AD1A0692844A842BB
+:1014400006D924616060211DF06800F0C7F90FE043
+:1014500000200346014600902A46204601F074FA17
+:1014600030B9084940F2923201F11800FEF724FF2A
+:10147000F06801680029D4D13169C6E90310F8BDCC
+:1014800078000020AC28000808484068401C04D0C0
+:10149000F42207A111A0FEF70FFF502080F311885E
+:1014A000BFF34F8FBFF36F8FFEE70000A400002053
+:1014B0002E2E5C4672656552544F535C706F727489
+:1014C00061626C655C525644535C41524D5F434DC2
+:1014D000335C706F72742E63000000004572726F8F
+:1014E000723A25732C25640D0A000000084CE06850
+:1014F000016839B1002139B10020FFF735FFFFF74E
+:10150000BBFEF4E70121F6E7C0680068F5E70000DC
+:10151000780000202DE9F041044600F083F994F9A9
+:10152000455004F1240610E0A06C20B100212046B3
+:10153000FFF72AFE04E0606A48B1304601F0D2F8B5
+:1015400008B100F051FB6D1E6DB2002DECDC4FF0C8
+:10155000FF3684F8456000F0A1F900F063F994F9D2
+:10156000445004F1100709E0206948B1384601F001
+:10157000B9F808B100F038FB6D1E6DB2002DF3DC38
+:1015800084F84460BDE8F04100F088B92DE9F041ED
+:101590000546002600F036FC324F386808B9FFF7E0
+:1015A00009FDF86805424FD1002D4DD00835680778
+:1015B0000BD005F00700C0F108000544680704D00F
+:1015C000BF2229A132A0FEF777FE002D3CD078681B
+:1015D000854239D8234910310846046801E0214684
+:1015E00004466068A84202D220680028F7D1386813
+:1015F000B846844228D00E682068086060680836C3
+:10160000401B10280ED96719780704D0EC2216A1C8
+:101610001FA0FEF751FE6068401B78603846656089
+:10162000FFF762FD6168D8F804004246401AC8F826
+:101630000400D8F80830984200D29060D8F80C0026
+:1016400001430020C4E9000101F098F8700705D0BB
+:101650004FF4967204A10EA0FEF72EFE3046BDE8B0
+:10166000F08100008C0000202E2E5C4672656552D1
+:10167000544F535C706F727461626C655C4D656D44
+:101680004D616E675C686561705F342E63000000B9
+:101690004572726F723A25732C25640D0A000000A2
+:1016A0000449086818B10868026D521C0265086890
+:1016B000704700003C00002010B5031F4FF08074FD
+:1016C0001C601B1F21F001011960191F024B0B60E8
+:1016D000143940380A6010BD8914000810B500F0B4
+:1016E000A1F8FFF7FBF80448006800F017FABDE81E
+:1016F000104000F0D3B800001400002070B505467B
+:1017000086B0012144F20400FFF74EF94FF4007057
+:10171000ADF8100003248DF8124018201D4E8DF8EE
+:10172000130004A93046FFF70BF83015ADF8100090
+:1017300004208DF8130004A93046FFF701F8252096
+:101740008DF814008DF815408DF8164001208DF8A5
+:10175000170005A8FFF7ECF80020ADF80400ADF87D
+:101760000600ADF80800ADF80C000C200A4CADF8EE
+:101770000A00009569462046FFF766FA012240F20A
+:1017800025512046FFF747FA01212046FFF71AFAB4
+:1017900006B070BD0008014000380140D0E90132B8
+:1017A00001699A60D0E901235A604A68824201D1F6
+:1017B00082684A60002202610868401E0860704723
+:1017C00000F108014FF0FF32C0E90112C160016170
+:1017D00000210160704700210161704730B50C683D
+:1017E000621C02D000F1080202E0026904E01A461D
+:1017F00053681D68A542FAD953684B6099608A60A6
+:10180000516008610168491C016030BD42684A604E
+:1018100093688B6093685960916008610168491C06
+:1018200001607047502080F31188BFF34F8FBFF3E2
+:101830006F8F09494868401C486001280AD1074851
+:10184000006810F0FF0F05D04FF4BD7204A10FA087
+:10185000FEF732BD70470000A400002004ED00E058
+:101860002E2E5C4672656552544F535C706F7274D5
+:1018700061626C655C525644535C41524D5F434D0E
+:10188000335C706F72742E63000000004572726FDB
+:10189000723A25732C25640D0A00000010B5084C1F
+:1018A000606828B940F2811206A111A0FEF704FD7C
+:1018B0006068401E606001D180F3118810BD000097
+:1018C000A40000202E2E5C4672656552544F535C76
+:1018D000706F727461626C655C525644535C415225
+:1018E0004D5F434D335C706F72742E6300000000D7
+:1018F0004572726F723A25732C25640D0A00000040
+:1019000070B500282AD0164DA0F108046068E96877
+:10191000084205D14FF4A07212A11CA0FEF7CCFC26
+:10192000206828B140F241120EA118A0FEF7C4FCB5
+:101930006068E968084211D02268002A0ED1884305
+:10194000606000F05FFA606869680844686020467B
+:10195000FFF7CAFBBDE8704000F010BF70BD00008B
+:101960008C0000202E2E5C4672656552544F535CED
+:10197000706F727461626C655C4D656D4D616E6710
+:101980005C686561705F342E630000004572726FA1
+:10199000723A25732C25640D0A00000006484FF4A6
+:1019A0007A710068B0FBF1F14FF0E020491E41610F
+:1019B00007210161704700000000002010B5FEF70C
+:1019C00055FC104C10280CD300F1E02090F8F003E7
+:1019D0002178884205D24FF42A720BA115A0FEF798
+:1019E0006BFC18480068A16800F4E060884207D9E1
+:1019F000BDE810404FF42E7203A10EA0FEF75CBCB0
+:101A000010BD0000A40000202E2E5C4672656552B9
+:101A1000544F535C706F727461626C655C525644D3
+:101A2000535C41524D5F434D335C706F72742E6353
+:101A3000000000004572726F723A25732C25640D08
+:101A40000A0000000CED00E010B5074B002253F82F
+:101A500032401CB1521C082AF9D310BD43F8321091
+:101A600003EBC201486010BD7801002070B5154637
+:101A70000E460446FFF7D6FE94F944100020491C98
+:101A800001D184F8440094F94510491C01D184F82F
+:101A90004500FFF703FFA06B28B92A46314604F141
+:101AA000240000F0D1F82046BDE87040FFF732BDB9
+:101AB00010B5040012D00E49096B29B140F2CF4293
+:101AC0000CA111A0FEF7F8FB00F09CF900212046C4
+:101AD000FFF72AF900F052FE002807D10E494FF017
+:101AE00080500860BFF34F8FBFF36F8F10BD0000B1
+:101AF0003C0000202E2E5C4672656552544F535CAC
+:101B00007461736B732E63004572726F723A257342
+:101B10002C25640D0A00000004ED00E070B50446B9
+:101B2000FFF780FE234D04B92C68201DFFF736FE19
+:101B300058B9E06A204A00EB800152F8211021B91F
+:101B400001218140286988432861A06A18B104F105
+:101B50001800FFF723FE686A401C68622868844208
+:101B600007D1211D1548FFF751FE6868401C6860C9
+:101B700007E0A868401EA8602046FFF710FAFFF7AC
+:101B800029FCFFF78BFE6869002812D02868844280
+:101B90000FD1286B28B140F2654209A10DA0FEF7D4
+:101BA0008BFB10494FF080500860BFF34F8FBFF39D
+:101BB0006F8F70BD3C000020B8010020740400202D
+:101BC0002E2E5C4672656552544F535C7461736B84
+:101BD000732E63004572726F723A25732C25640D63
+:101BE0000A00000004ED00E001490120C8617047CF
+:101BF0003C00002070B50D46040005D140F60632C9
+:101C000007A10CA0FEF758FB0E48016820461831CA
+:101C1000FFF7E4FD2846BDE870400121FFF784B8D6
+:101C20002E2E5C4672656552544F535C7461736B23
+:101C3000732E63004572726F723A25732C25640D02
+:101C40000A0000003C00002070B514460E46050056
+:101C500005D140F6313209A10DA0FEF72DFB104849
+:101C6000016828461831FFF7D1FD0CB14FF0FF365F
+:101C700021463046BDE87040FFF756B82E2E5C4630
+:101C800072656552544F535C7461736B732E6300BD
+:101C90004572726F723A25732C25640D0A0000009C
+:101CA0003C00002070B5040039D01D4DE06A296861
+:101CB000C96A884233D2A069002804DB2868C06A58
+:101CC000C0F12000A061E06A164E00EB800061695F
+:101CD00006EB800081421FD1201DFFF75FFD01212F
+:101CE00050B9E06A00EB800256F8222022B92A6936
+:101CF00001FA00F082432A612868C06AE0622A691A
+:101D000081401143296100EB800006EB8000211D1A
+:101D1000BDE87040FFF77ABD2868C06AE06270BD18
+:101D20003C000020B801002010B5040005D140F6A9
+:101D3000C13205A109A0FEF7BFFA0C48016A216073
+:101D4000C068606010BD00002E2E5C467265655252
+:101D5000544F535C7461736B732E63004572726FE2
+:101D6000723A25732C25640D0A0000003C00002007
+:101D70001CB517480024CDE900402346822215A156
+:101D8000164800F0A1FB012803D100F0A3FD0128B3
+:101D90000AD0401C1BD102B040F28472BDE8104052
+:101DA0000FA114A0FEF788BA502080F31188BFF36A
+:101DB0004F8FBFF36F8F06484FF0FF312C38816291
+:101DC00001214161C460BDE81C4000F061B81CBD48
+:101DD0006800002049444C45000000000110000844
+:101DE0002E2E5C4672656552544F535C7461736B62
+:101DF000732E63004572726F723A25732C25640D41
+:101E00000A0000000248016B491C01637047000092
+:101E10003C00002070B5134D286B10B10120E86123
+:101E200070BD0020E86128690F4EB0FA80F0C0F163
+:101E30001F0000EB800456F8240028B940F6F62273
+:101E40000AA10FA0FEF738FA06EB840000F10802A1
+:101E5000416849684160914201D149684160C86860
+:101E6000286070BD3C000020B80100202E2E5C468A
+:101E700072656552544F535C7461736B732E6300CB
+:101E80004572726F723A25732C25640D0A000000AA
+:101E90001CB51A4908780190FF20087008788DF861
+:101EA00000009DF80000164A00F050001070072056
+:101EB000906007E09068401E90609DF80000400030
+:101EC0008DF800009DF800000006F3D4107A00029F
+:101ED00000F4E0609060019808700A48016841F4DD
+:101EE00070010160016841F070410160FFF756FD2B
+:101EF00000205060FEF784F900201CBD00E400E0E3
+:101F0000A400002020ED00E010B5502080F31188DF
+:101F1000BFF34F8FBFF36F8F00F016FB18B104496A
+:101F20004FF080500860002080F3118810BD000041
+:101F300004ED00E02DE9F04117460E46050005D1FD
+:101F40004FF4C47210A115A0FEF7B6F9BEB105FB9F
+:101F500006F05430FFF71AFB04000ED004F15400D1
+:101F60007EB12060C4E90F562046012100F0E0F860
+:101F700084F8507000212046A164BDE8F081002063
+:101F8000E7E72460EEE700002E2E5C46726565529E
+:101F9000544F535C71756575652E63004572726FA1
+:101FA000723A25732C25640D0A0000002DE9FF4FBD
+:101FB00083B09B468A4604004FF0000605D140F2EC
+:101FC000DC4251A155A0FEF777F9BAF1000F07D115
+:101FD000206C28B140F2DD424BA150A0FEF76CF915
+:101FE00000F09EFA38B9059828B14FF49C6246A1DA
+:101FF0004AA0FEF761F94FF000094FF08057DFF873
+:102000002C81FFF70FFCA56B45B351462046E668CF
+:10201000FEF77CFFBBF1000F13D0E660606A50B1A1
+:1020200004F1240000F05EFB28B1C8F80070BFF393
+:102030004F8FBFF36F8FFFF731FC012007B0BDE872
+:10204000F08F6D1EA563206810B9FFF729FB606053
+:1020500020690028EFD004F11000E3E7059808B1EB
+:102060001EB106E0FFF71AFC27E06846FFF75CFEAA
+:102070000126FFF713FCFFF7C5FEFFF7D3FB94F92A
+:102080004400401C01D184F8449094F94500401C60
+:1020900001D184F84590FFF701FC05A9684600F0DE
+:1020A000CFF9002820460AD0FFF734FA00F066FB8B
+:1020B0002046FFF75BF80028A3D00020BEE7FFF71B
+:1020C00055F8D8B1206830B9FFF7ACFB6068FFF76E
+:1020D000E9FDFFF7E3FB04F124000599FFF78AFD12
+:1020E0002046FFF717FA00F049FB002889D1C8F80D
+:1020F0000070BFF34F8FBFF36F8F82E72046FFF76B
+:1021000009FA00F03BFB7CE72E2E5C4672656552B7
+:10211000544F535C71756575652E63004572726F1F
+:10212000723A25732C25640D0A00000004ED00E0CE
+:1021300070B50D46040005D140F21B121CA121A070
+:10214000FEF7BAF8FFF76EFBD4E90F20216802FB17
+:10215000001161600021A1632168A1600A46D4E9F1
+:102160000F01401E00FB0121E16021464FF0FF30CE
+:1021700001F8440F487004F110004DB1FFF720FB47
+:1021800004F12400FFF71CFBFFF788FB012070BD62
+:1021900021690029F8D000F0A5FA0028F4D00D49F3
+:1021A0004FF080500860BFF34F8FBFF36F8FEBE7A6
+:1021B0002E2E5C4672656552544F535C7175657581
+:1021C000652E63004572726F723A25732C25640D7B
+:1021D0000A00000004ED00E02DE9FF4F83B09946AE
+:1021E0008B4604004FF0000605D140F2D92252A1DF
+:1021F00056A0FEF761F8BBF1000F07D1206C28B1A3
+:1022000040F2DA224CA151A0FEF756F8B9F1020FC4
+:1022100008D1E06B012805D040F2DB2246A14BA09B
+:10222000FEF74AF800F07CF938B9059828B140F279
+:10223000DE2241A145A0FEF73FF84FF0000A4FF023
+:102240008057DFF81881FFF7EDFAA06BE16B884249
+:1022500006D3B9F1020F03D0059800B316B325E0F9
+:102260004A4659462046FEF764FEA16C21B1494614
+:102270002046FEF789FF05E0616A19B104F12400E8
+:1022800000F030FA28B1C8F80070BFF34F8FBFF3E9
+:102290006F8FFFF703FB012007B0BDE8F08FFFF75A
+:1022A000FDFA21E06846FFF73FFD0126FFF7F6FA49
+:1022B000FFF7A8FDFFF7B6FA94F94400401C01D1DE
+:1022C00084F844A094F94500401C01D184F845A04D
+:1022D000FFF7E4FA05A9684600F0B2F830B12046ED
+:1022E000FFF718F900F04AFA0020D5E7FFF79AFA4D
+:1022F000A06BE16B884201D1012500E00025FFF7CA
+:10230000CDFA95B104F110000599FFF773FC204652
+:10231000FFF700F900F032FA002894D1C8F80070F5
+:10232000BFF34F8FBFF36F8F8DE72046FFF7F2F8B3
+:1023300000F024FA87E700002E2E5C467265655295
+:10234000544F535C71756575652E63004572726FED
+:10235000723A25732C25640D0A00000004ED00E09C
+:102360002DE9F047984615468946040005D140F20C
+:102370009F322AA12EA0FDF79FFFB9F1000F07D1D0
+:10238000206C28B14FF4687224A129A0FDF794FFB6
+:10239000B8F1020F08D1E06B012805D040F2A1325C
+:1023A0001EA123A0FDF788FFFFF708FB5020EFF3E5
+:1023B000118780F31188BFF34F8FBFF36F8FA06B2E
+:1023C000E16B884207D3B8F1020F04D0002087F3F5
+:1023D0001188BDE8F08794F9456042464946204699
+:1023E000FEF7A7FD701C04D0761C84F84560012020
+:1023F000EDE7A06C012620B141462046FEF7C4FE61
+:1024000006E0606A0028F2D004F1240000F06AF9C6
+:102410000028ECD0002DEAD02E60E8E72E2E5C4696
+:1024200072656552544F535C71756575652E630016
+:102430004572726F723A25732C25640D0A000000F4
+:1024400070B50D46040005D140F6CB3214A119A099
+:10245000FDF732FF2DB940F6CC3211A115A0FDF7E2
+:102460002BFFFFF7DFF9174AD06829684B1C0FD004
+:102470002368126A934202D0626882420AD9626873
+:10248000801A884206D2081A28602046FFF74CFCC2
+:10249000002400E00124FFF701FA204670BD00008F
+:1024A0002E2E5C4672656552544F535C7461736B9B
+:1024B000732E63004572726F723A25732C25640D7A
+:1024C0000A0000003C0000202DE9FF5F8346DDE9A3
+:1024D0000E87994616468A469000FFF757F8050082
+:1024E0001AD05C20FFF752F8040012D025630021B7
+:1024F000CDE90241CDE900874B4632465146584668
+:10250000FEF792FD2046FEF747FC012004B0BDE82F
+:10251000F09F2846FFF7F4F94FF0FF30F6E7000090
+:102520000548416919B1006B18B1002070470120BE
+:1025300070470220704700003C0000200148C0683E
+:10254000704700003C0000202DE9F0412D4F00268F
+:10255000386B40B1B869401CB861F86900B1012618
+:102560003046BDE8F081FD686D1CFD6011D1786BCF
+:10257000006828B140F6D91223A128A0FDF79CFEDF
+:10258000786BB96B7963B863386A401C3862FEF7C0
+:1025900021FFB86ADFF89480854209D3786B006820
+:1025A00080B1786BC068C468606885420DD2B8623B
+:1025B0003868C06A00EB800158F821000128CCD9A6
+:1025C0000126CAE74FF0FF30F1E7201DFFF7E6F8DC
+:1025D000A06A18B104F11800FFF7E0F8E06A0121E1
+:1025E0003A6981401143396100EB800108EB8100B9
+:1025F000211DFFF70BF9E06A3968C96A8842CDD31B
+:102600000126CBE73C0000202E2E5C467265655209
+:10261000544F535C7461736B732E63004572726F19
+:10262000723A25732C25640D0A000000B8010020C1
+:1026300070B504004FF000063CD01F4D286884425E
+:1026400005D040F6C7621DA121A0FDF735FE206D23
+:1026500028B940F6C96219A11DA0FDF72DFE206D15
+:10266000401E2065E26CE16A914223D010BB201D20
+:10267000FFF794F81A49012250B9E06A00EB800391
+:1026800051F8233023B92B6902FA00F083432B6100
+:10269000E06CE062C0F12000A061E06A2B6982403A
+:1026A0001A432A6100EB800001EB8000211DFFF737
+:1026B000ADF80126304670BD3C0000202E2E5C4651
+:1026C00072656552544F535C7461736B732E630073
+:1026D0004572726F723A25732C25640D0A00000052
+:1026E000B80100202DE9F041C068C4682CB940F65B
+:1026F000613216A11AA0FDF7DFFD04F118000746AC
+:10270000FFF74CF81A4D286B012660B1394619487D
+:10271000FFF77CF8E06A2968C96A884213D901206A
+:10272000EE61BDE8F081201DFFF738F8E06A2A6904
+:1027300006FA00F1114329610F4900EB800001EB1B
+:102740008000211DE4E70020EBE700002E2E5C4610
+:1027500072656552544F535C7461736B732E6300E2
+:102760004572726F723A25732C25640D0A000000C1
+:102770003C00002060040020B80100202DE9F04753
+:102780002B4D00242746286B28B94FF4FD6229A160
+:102790002DA0FDF791FDFFF745F8286B401E28633B
+:1027A000286BE8BBA8682C490126C8B3A1F52A7993
+:1027B0008846D8F80010E9B1D8F80C00C46804F1D4
+:1027C0001800FEF7EBFF201DFEF7E8FFE06A2A691C
+:1027D00006FA00F11143296100EB800109EB810049
+:1027E000211DFFF713F8E06A2968C96A8842E0D31F
+:1027F000EE61DEE70CB1FEF7EDFDAC693CB1FFF731
+:10280000A3FE00B1EE61641EF9D10020A861E86961
+:1028100030B11249012738070860BFF34F8F00E03D
+:1028200001E0BFF36F8FFFF739F83846BDE8F08756
+:102830003C0000202E2E5C4672656552544F535C5E
+:102840007461736B732E63004572726F723A2573F5
+:102850002C25640D0A0000006004002004ED00E057
+:102860002DE9F0470746994616460D462C20DDF81F
+:1028700020A0FEF78BFE040014D0B8464F46D14688
+:102880002DB94FF4C67209A10EA0FDF715FDFEF794
+:10289000EBFA04F11801C4F8008081E8E002201D81
+:1028A000FEF799FF2046BDE8F08700002E2E5C461B
+:1028B00072656552544F535C74696D6572732E6313
+:1028C000000000004572726F723A25732C25640D6A
+:1028D0000A0000001CB50024FEF7C6FA0C48006888
+:1028E00068B10B491F20091DCDE9000100234FF4F9
+:1028F000827208A10948FFF7E7FD040005D140F204
+:10290000331207A10CA0FDF7D7FC20461CBD000028
+:1029100078000020546D722053766300ED14000897
+:102920002E2E5C4672656552544F535C74696D651A
+:1029300072732E63000000004572726F723A257345
+:102940002C25640D0A0000002DE9FF47DDF830A0BA
+:10295000994690460D4606004FF0000705D14FF40A
+:10296000D37212A117A0FDF7A7FC1A4C206880B102
+:10297000CDE900580296062D11DAFFF7D1FD0228A5
+:102980004FF0000309D0002269462068FFF724FCBD
+:10299000074604B03846BDE8F0875246F4E7002306
+:1029A0004A466946FFF7DCFCF2E700002E2E5C4643
+:1029B00072656552544F535C74696D6572732E6312
+:1029C000000000004572726F723A25732C25640D69
+:1029D0000A00000078000020F8290008000000200C
+:1029E000B00000006C010008A82A0008B000002018
+:1029F000785A00008801000800A24A040000000084
+:102A0000000000000102030406070809000000009E
+:102A100000000000000000000000000000000000B6
+:102A2000020406080000000001020304010203047E
+:102A30000607080900000000000000000000000078
+:102A40000000000000000000000000000000000086
+:102A50000000000000000000000000000000000076
+:102A60000000000000000000000000000000000066
+:102A70000000000000000000000000000000000056
+:102A80000000000000000000000000000000000046
+:102A90000000000000000000000000000000000036
+:082AA000AAAAAAAA0000000086
+:040000050800027578
+:00000001FF
diff --git a/Program/XLLC/OBJ/LED.htm b/Program/XLLC/OBJ/LED.htm
new file mode 100644
index 0000000000000000000000000000000000000000..9d768e8e1570ed22a80e37c16983d8f32dedde51
--- /dev/null
+++ b/Program/XLLC/OBJ/LED.htm
@@ -0,0 +1,1645 @@
+
+
+Static Call Graph - [..\OBJ\LED.axf]
+

+
Static Call Graph for image ..\OBJ\LED.axf

+
#<CALLGRAPH># ARM Linker, 5060960: Last Updated: Wed Jul 21 20:20:59 2021
+

+
Maximum Stack Usage =        416 bytes + Unknown(Functions without stacksize, Cycles, Untraceable Function Pointers)

+Call chain for Maximum Stack Depth:

+prvTimerTask ⇒ prvProcessReceivedCommands ⇒ prvSampleTimeNow ⇒ prvSwitchTimerLists ⇒ xTimerGenericCommand ⇒ xQueueGenericSend ⇒ prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+

+

+Functions with no stack information
+

+
+

+

+Mutually Recursive functions
+
 
  • ADC1_2_IRQHandler   ⇒   ADC1_2_IRQHandler
    
+ 
  • BusFault_Handler   ⇒   BusFault_Handler
    
+ 
  • HardFault_Handler   ⇒   HardFault_Handler
    
+ 
  • MemManage_Handler   ⇒   MemManage_Handler
    
+ 
  • UsageFault_Handler   ⇒   UsageFault_Handler
    
+
+
    
+
    
+Function Pointers
+
      
+ 
    • ADC1_2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • ADC3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • BusFault_Handler from stm32f10x_it.o(i.BusFault_Handler) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • CAN1_RX1_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • CAN1_SCE_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DMA1_Channel1_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DMA1_Channel2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DMA1_Channel3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DMA1_Channel4_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DMA1_Channel5_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DMA1_Channel6_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DMA1_Channel7_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DMA2_Channel1_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DMA2_Channel2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DMA2_Channel3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DMA2_Channel4_5_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • DebugMon_Handler from stm32f10x_it.o(i.DebugMon_Handler) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • EXTI0_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • EXTI15_10_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • EXTI1_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • EXTI2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • EXTI3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • EXTI4_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • EXTI9_5_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • FLASH_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • FSMC_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • HardFault_Handler from stm32f10x_it.o(i.HardFault_Handler) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • I2C1_ER_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • I2C1_EV_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • I2C2_ER_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • I2C2_EV_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • LED0_task from led_task.o(i.LED0_task) referenced from led_task.o(i.LED_task_Create)
+ 
    • LED1_task from led_task.o(i.LED1_task) referenced from led_task.o(i.LED_task_Create)
+ 
    • MemManage_Handler from stm32f10x_it.o(i.MemManage_Handler) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • NMI_Handler from stm32f10x_it.o(i.NMI_Handler) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • PVD_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • PendSV_Handler from port.o(.emb_text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • RCC_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • RTCAlarm_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • RTC_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • Reset_Handler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • SDIO_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • SPI1_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • SPI2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • SPI3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • SVC_Handler from port.o(.emb_text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • SysTick_Handler from sys.o(i.SysTick_Handler) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • SystemInit from system_stm32f10x.o(i.SystemInit) referenced from startup_stm32f10x_hd.o(.text)
+ 
    • TAMPER_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM1_BRK_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM1_CC_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM1_TRG_COM_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM1_UP_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM4_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM5_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM6_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM7_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM8_BRK_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM8_CC_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM8_TRG_COM_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • TIM8_UP_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • UART4_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • UART5_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • USART1_IRQHandler from usart.o(i.USART1_IRQHandler) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • USART2_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • USART3_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • USBWakeUp_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • USB_HP_CAN1_TX_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • USB_LP_CAN1_RX0_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • UsageFault_Handler from stm32f10x_it.o(i.UsageFault_Handler) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • WWDG_IRQHandler from startup_stm32f10x_hd.o(.text) referenced from startup_stm32f10x_hd.o(RESET)
+ 
    • __main from __main.o(!!!main) referenced from startup_stm32f10x_hd.o(.text)
+ 
    • _printf_input_char from _printf_char_common.o(.text) referenced from _printf_char_common.o(.text)
+ 
    • fputc from usart.o(i.fputc) referenced from _printf_char_file.o(.text)
+ 
    • prvIdleTask from tasks.o(i.prvIdleTask) referenced from tasks.o(i.vTaskStartScheduler)
+ 
    • prvTaskExitError from port.o(i.prvTaskExitError) referenced from port.o(i.pxPortInitialiseStack)
+ 
    • prvTimerTask from timers.o(i.prvTimerTask) referenced from timers.o(i.xTimerCreateTimerTask)
+ 
    • start_task from init_task.o(i.start_task) referenced from init_task.o(i.Init_task)
+
    
+
    
+
    
+Global Symbols
+
    
+
    __main (Thumb, 8 bytes, Stack size 0 bytes, __main.o(!!!main))
+

    [Calls]
    • >>   __scatterload
+
    • >>   __rt_entry
+
    
+
+
    __scatterload (Thumb, 0 bytes, Stack size unknown bytes, __scatter.o(!!!scatter))
+

    [Called By]
    • >>   __main
+
    
+
+
    __scatterload_rt2 (Thumb, 44 bytes, Stack size unknown bytes, __scatter.o(!!!scatter), UNUSED)
+

    [Calls]
    • >>   __rt_entry
+
    
+
+
    __scatterload_rt2_thumb_only (Thumb, 0 bytes, Stack size unknown bytes, __scatter.o(!!!scatter), UNUSED)
+
+
    __scatterload_null (Thumb, 0 bytes, Stack size unknown bytes, __scatter.o(!!!scatter), UNUSED)
+
+
    __scatterload_copy (Thumb, 26 bytes, Stack size unknown bytes, __scatter_copy.o(!!handler_copy), UNUSED)
+

    [Calls]
    • >>   __scatterload_copy
+
    
+
    [Called By]
    • >>   __scatterload_copy
+
    
+
+
    __scatterload_zeroinit (Thumb, 28 bytes, Stack size unknown bytes, __scatter_zi.o(!!handler_zi), UNUSED)
+
+
    _printf_d (Thumb, 0 bytes, Stack size unknown bytes, _printf_d.o(.ARM.Collect$$_printf_percent$$00000009))
+

    [Stack]
    • Max Depth = 56 + Unknown Stack Size
+
    • Call Chain = _printf_d ⇒ _printf_int_dec ⇒ _printf_int_common
+
    
+
    [Calls]
    • >>   _printf_int_dec
+
    
+
+
    _printf_percent (Thumb, 0 bytes, Stack size unknown bytes, _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000))
+

    [Called By]
    • >>   __printf
+
    
+
+
    _printf_s (Thumb, 0 bytes, Stack size unknown bytes, _printf_s.o(.ARM.Collect$$_printf_percent$$00000014))
+

    [Stack]
    • Max Depth = 24 + Unknown Stack Size
+
    • Call Chain = _printf_s ⇒ _printf_string ⇒ _printf_cs_common ⇒ _printf_str
+
    
+
    [Calls]
    • >>   _printf_string
+
    
+
+
    _printf_percent_end (Thumb, 0 bytes, Stack size unknown bytes, _printf_percent_end.o(.ARM.Collect$$_printf_percent$$00000017))
+
+
    __rt_lib_init (Thumb, 0 bytes, Stack size unknown bytes, libinit.o(.ARM.Collect$$libinit$$00000000))
+

    [Called By]
    • >>   __rt_entry_li
+
    
+
+
    __rt_lib_init_alloca_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000002E))
+
+
    __rt_lib_init_argv_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000002C))
+
+
    __rt_lib_init_atexit_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000001B))
+
+
    __rt_lib_init_clock_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000021))
+
+
    __rt_lib_init_cpp_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000032))
+
+
    __rt_lib_init_exceptions_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000030))
+
+
    __rt_lib_init_fp_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000002))
+
+
    __rt_lib_init_fp_trap_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000001F))
+
+
    __rt_lib_init_getenv_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000023))
+
+
    __rt_lib_init_heap_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000000A))
+
+
    __rt_lib_init_lc_collate_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000011))
+
+
    __rt_lib_init_lc_ctype_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000013))
+
+
    __rt_lib_init_lc_monetary_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000015))
+
+
    __rt_lib_init_lc_numeric_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000017))
+
+
    __rt_lib_init_lc_time_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000019))
+
+
    __rt_lib_init_preinit_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000004))
+
+
    __rt_lib_init_rand_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000000E))
+
+
    __rt_lib_init_return (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000033))
+
+
    __rt_lib_init_signal_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000001D))
+
+
    __rt_lib_init_stdio_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$00000025))
+
+
    __rt_lib_init_user_alloc_1 (Thumb, 0 bytes, Stack size unknown bytes, libinit2.o(.ARM.Collect$$libinit$$0000000C))
+
+
    __rt_lib_shutdown (Thumb, 0 bytes, Stack size unknown bytes, libshutdown.o(.ARM.Collect$$libshutdown$$00000000))
+

    [Called By]
    • >>   __rt_exit_ls
+
    
+
+
    __rt_lib_shutdown_cpp_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$00000004))
+
+
    __rt_lib_shutdown_fini_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$00000002))
+
+
    __rt_lib_shutdown_fp_trap_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$00000009))
+
+
    __rt_lib_shutdown_heap_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$00000011))
+
+
    __rt_lib_shutdown_return (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$00000012))
+
+
    __rt_lib_shutdown_signal_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$0000000C))
+
+
    __rt_lib_shutdown_stdio_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$00000006))
+
+
    __rt_lib_shutdown_user_alloc_1 (Thumb, 0 bytes, Stack size unknown bytes, libshutdown2.o(.ARM.Collect$$libshutdown$$0000000E))
+
+
    __rt_entry (Thumb, 0 bytes, Stack size unknown bytes, __rtentry.o(.ARM.Collect$$rtentry$$00000000))
+

    [Called By]
    • >>   __scatterload_rt2
+
    • >>   __main
+
    
+
+
    __rt_entry_presh_1 (Thumb, 0 bytes, Stack size unknown bytes, __rtentry2.o(.ARM.Collect$$rtentry$$00000002))
+
+
    __rt_entry_sh (Thumb, 0 bytes, Stack size unknown bytes, __rtentry4.o(.ARM.Collect$$rtentry$$00000004))
+

    [Stack]
    • Max Depth = 8 + Unknown Stack Size
+
    • Call Chain = __rt_entry_sh ⇒ __user_setup_stackheap
+
    
+
    [Calls]
    • >>   __user_setup_stackheap
+
    
+
+
    __rt_entry_li (Thumb, 0 bytes, Stack size unknown bytes, __rtentry2.o(.ARM.Collect$$rtentry$$0000000A))
+

    [Calls]
    • >>   __rt_lib_init
+
    
+
+
    __rt_entry_postsh_1 (Thumb, 0 bytes, Stack size unknown bytes, __rtentry2.o(.ARM.Collect$$rtentry$$00000009))
+
+
    __rt_entry_main (Thumb, 0 bytes, Stack size unknown bytes, __rtentry2.o(.ARM.Collect$$rtentry$$0000000D))
+

    [Stack]
    • Max Depth = 320 + Unknown Stack Size
+
    • Call Chain = __rt_entry_main ⇒ main ⇒ Init_task ⇒ vTaskStartScheduler ⇒ xTimerCreateTimerTask ⇒ xTaskCreate ⇒ pvPortMalloc ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   main
+
    • >>   exit
+
    
+
+
    __rt_entry_postli_1 (Thumb, 0 bytes, Stack size unknown bytes, __rtentry2.o(.ARM.Collect$$rtentry$$0000000C))
+
+
    __rt_exit (Thumb, 0 bytes, Stack size unknown bytes, rtexit.o(.ARM.Collect$$rtexit$$00000000))
+

    [Called By]
    • >>   exit
+
    
+
+
    __rt_exit_ls (Thumb, 0 bytes, Stack size unknown bytes, rtexit2.o(.ARM.Collect$$rtexit$$00000003))
+

    [Calls]
    • >>   __rt_lib_shutdown
+
    
+
+
    __rt_exit_prels_1 (Thumb, 0 bytes, Stack size unknown bytes, rtexit2.o(.ARM.Collect$$rtexit$$00000002))
+
+
    __rt_exit_exit (Thumb, 0 bytes, Stack size unknown bytes, rtexit2.o(.ARM.Collect$$rtexit$$00000004))
+

    [Calls]
    • >>   _sys_exit
+
    
+
+
    SVC_Handler (Thumb, 32 bytes, Stack size 0 bytes, port.o(.emb_text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    __asm___6_port_c_39a90d8d__prvStartFirstTask (Thumb, 28 bytes, Stack size 0 bytes, port.o(.emb_text))
+

    [Called By]
    • >>   xPortStartScheduler
+
    
+
+
    PendSV_Handler (Thumb, 72 bytes, Stack size 0 bytes, port.o(.emb_text))
+

    [Stack]
    • Max Depth = 144 + Unknown Stack Size
+
    • Call Chain = PendSV_Handler ⇒ vTaskSwitchContext ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vTaskSwitchContext
+
    
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    vPortGetIPSR (Thumb, 6 bytes, Stack size 0 bytes, port.o(.emb_text))
+

    [Called By]
    • >>   vPortValidateInterruptPriority
+
    
+
+
    Reset_Handler (Thumb, 8 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
+
    ADC1_2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+

    [Calls]
    • >>   ADC1_2_IRQHandler
+
    
+
    [Called By]
    • >>   ADC1_2_IRQHandler
+
    
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    ADC3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    CAN1_RX1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    CAN1_SCE_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DMA1_Channel1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DMA1_Channel2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DMA1_Channel3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DMA1_Channel4_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DMA1_Channel5_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DMA1_Channel6_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DMA1_Channel7_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DMA2_Channel1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DMA2_Channel2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DMA2_Channel3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DMA2_Channel4_5_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    EXTI0_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    EXTI15_10_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    EXTI1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    EXTI2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    EXTI3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    EXTI4_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    EXTI9_5_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    FLASH_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    FSMC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    I2C1_ER_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    I2C1_EV_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    I2C2_ER_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    I2C2_EV_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    PVD_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    RCC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    RTCAlarm_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    RTC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    SDIO_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    SPI1_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    SPI2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    SPI3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TAMPER_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM1_BRK_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM1_CC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM1_TRG_COM_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM1_UP_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM4_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM5_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM6_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM7_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM8_BRK_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM8_CC_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM8_TRG_COM_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    TIM8_UP_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    UART4_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    UART5_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    USART2_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    USART3_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    USBWakeUp_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    USB_HP_CAN1_TX_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    USB_LP_CAN1_RX0_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    WWDG_IRQHandler (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f10x_hd.o(.text))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    __user_initial_stackheap (Thumb, 0 bytes, Stack size unknown bytes, startup_stm32f10x_hd.o(.text))
+

    [Called By]
    • >>   __user_setup_stackheap
+
    
+
+
    __use_no_semihosting (Thumb, 2 bytes, Stack size 0 bytes, use_no_semi_2.o(.text), UNUSED)
+
+
    __2printf (Thumb, 20 bytes, Stack size 24 bytes, noretval__2printf.o(.text))
+

    [Stack]
    • Max Depth = 128 + Unknown Stack Size
+
    • Call Chain = __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   _printf_char_file
+
    
+
    [Called By]
    • >>   vTaskDelay
+
    • >>   vTaskStartScheduler
+
    • >>   vTaskDelete
+
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   xTaskIncrementTick
+
    • >>   vTaskSwitchContext
+
    • >>   prvInitialiseNewTask
+
    • >>   xTaskRemoveFromEventList
+
    • >>   xTaskPriorityDisinherit
+
    • >>   xTaskCheckForTimeOut
+
    • >>   vTaskSetTimeOutState
+
    • >>   vTaskPlaceOnEventListRestricted
+
    • >>   vTaskPlaceOnEventList
+
    • >>   vPortValidateInterruptPriority
+
    • >>   xQueueGenericSendFromISR
+
    • >>   xQueueGenericSend
+
    • >>   xQueueGenericReset
+
    • >>   xQueueGenericReceive
+
    • >>   xQueueGenericCreate
+
    • >>   prvNotifyQueueSetContainer
+
    • >>   xTaskResumeAll
+
    • >>   vPortFree
+
    • >>   pvPortMalloc
+
    • >>   prvTaskExitError
+
    • >>   xTimerGenericCommand
+
    • >>   xTimerCreate
+
    • >>   prvSwitchTimerLists
+
    • >>   prvProcessReceivedCommands
+
    • >>   prvProcessExpiredTimer
+
    • >>   xTimerCreateTimerTask
+
    
+
+
    __printf (Thumb, 104 bytes, Stack size 24 bytes, __printf.o(.text))
+

    [Stack]
    • Max Depth = 24 + Unknown Stack Size
+
    • Call Chain = __printf
+
    
+
    [Calls]
    • >>   _printf_percent
+
    
+
    [Called By]
    • >>   _printf_char_common
+
    
+
+
    _printf_str (Thumb, 82 bytes, Stack size 16 bytes, _printf_str.o(.text))
+

    [Stack]
    • Max Depth = 16
    • Call Chain = _printf_str
+
    
+
    [Called By]
    • >>   _printf_cs_common
+
    
+
+
    _printf_int_dec (Thumb, 104 bytes, Stack size 24 bytes, _printf_dec.o(.text))
+

    [Stack]
    • Max Depth = 56
    • Call Chain = _printf_int_dec ⇒ _printf_int_common
+
    
+
    [Calls]
    • >>   _printf_int_common
+
    
+
    [Called By]
    • >>   _printf_d
+
    
+
+
    __aeabi_memcpy (Thumb, 0 bytes, Stack size 0 bytes, rt_memcpy_v6.o(.text))
+

    [Called By]
    • >>   prvCopyDataToQueue
+
    • >>   prvCopyDataFromQueue
+
    
+
+
    __rt_memcpy (Thumb, 138 bytes, Stack size 0 bytes, rt_memcpy_v6.o(.text), UNUSED)
+

    [Calls]
    • >>   __aeabi_memcpy4
+
    
+
+
    _memcpy_lastbytes (Thumb, 0 bytes, Stack size unknown bytes, rt_memcpy_v6.o(.text), UNUSED)
+
+
    __aeabi_memset (Thumb, 16 bytes, Stack size 0 bytes, aeabi_memset.o(.text))
+

    [Calls]
    • >>   _memset
+
    
+
    [Called By]
    • >>   prvInitialiseNewTask
+
    
+
+
    __use_two_region_memory (Thumb, 2 bytes, Stack size 0 bytes, heapauxi.o(.text), UNUSED)
+
+
    __rt_heap_escrow$2region (Thumb, 2 bytes, Stack size 0 bytes, heapauxi.o(.text), UNUSED)
+
+
    __rt_heap_expand$2region (Thumb, 2 bytes, Stack size 0 bytes, heapauxi.o(.text), UNUSED)
+
+
    __I$use$semihosting (Thumb, 0 bytes, Stack size 0 bytes, use_no_semi.o(.text), UNUSED)
+
+
    __use_no_semihosting_swi (Thumb, 2 bytes, Stack size 0 bytes, use_no_semi.o(.text), UNUSED)
+
+
    _printf_int_common (Thumb, 178 bytes, Stack size 32 bytes, _printf_intcommon.o(.text))
+

    [Stack]
    • Max Depth = 32
    • Call Chain = _printf_int_common
+
    
+
    [Called By]
    • >>   _printf_int_dec
+
    
+
+
    _printf_char_common (Thumb, 32 bytes, Stack size 64 bytes, _printf_char_common.o(.text))
+

    [Stack]
    • Max Depth = 88 + Unknown Stack Size
+
    • Call Chain = _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   __printf
+
    
+
    [Called By]
    • >>   _printf_char_file
+
    
+
+
    _printf_cs_common (Thumb, 20 bytes, Stack size 8 bytes, _printf_char.o(.text))
+

    [Stack]
    • Max Depth = 24
    • Call Chain = _printf_cs_common ⇒ _printf_str
+
    
+
    [Calls]
    • >>   _printf_str
+
    
+
    [Called By]
    • >>   _printf_string
+
    • >>   _printf_char
+
    
+
+
    _printf_char (Thumb, 16 bytes, Stack size 0 bytes, _printf_char.o(.text), UNUSED)
+

    [Calls]
    • >>   _printf_cs_common
+
    
+
+
    _printf_string (Thumb, 8 bytes, Stack size 0 bytes, _printf_char.o(.text))
+

    [Stack]
    • Max Depth = 24
    • Call Chain = _printf_string ⇒ _printf_cs_common ⇒ _printf_str
+
    
+
    [Calls]
    • >>   _printf_cs_common
+
    
+
    [Called By]
    • >>   _printf_s
+
    
+
+
    _printf_char_file (Thumb, 32 bytes, Stack size 16 bytes, _printf_char_file.o(.text))
+

    [Stack]
    • Max Depth = 104 + Unknown Stack Size
+
    • Call Chain = _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   ferror
+
    • >>   _printf_char_common
+
    
+
    [Called By]
    • >>   __2printf
+
    
+
+
    __aeabi_memcpy4 (Thumb, 0 bytes, Stack size 8 bytes, rt_memcpy_w.o(.text), UNUSED)
+

    [Called By]
    • >>   __rt_memcpy
+
    
+
+
    __aeabi_memcpy8 (Thumb, 0 bytes, Stack size 8 bytes, rt_memcpy_w.o(.text), UNUSED)
+
+
    __rt_memcpy_w (Thumb, 100 bytes, Stack size 8 bytes, rt_memcpy_w.o(.text), UNUSED)
+
+
    _memcpy_lastbytes_aligned (Thumb, 0 bytes, Stack size unknown bytes, rt_memcpy_w.o(.text), UNUSED)
+
+
    __aeabi_memclr (Thumb, 0 bytes, Stack size 0 bytes, rt_memclr.o(.text), UNUSED)
+
+
    __rt_memclr (Thumb, 68 bytes, Stack size 0 bytes, rt_memclr.o(.text), UNUSED)
+

    [Calls]
    • >>   _memset_w
+
    
+
+
    _memset (Thumb, 0 bytes, Stack size unknown bytes, rt_memclr.o(.text))
+

    [Called By]
    • >>   __aeabi_memset
+
    
+
+
    ferror (Thumb, 8 bytes, Stack size 0 bytes, ferror.o(.text))
+

    [Called By]
    • >>   _printf_char_file
+
    
+
+
    __aeabi_memclr4 (Thumb, 0 bytes, Stack size 4 bytes, rt_memclr_w.o(.text), UNUSED)
+
+
    __aeabi_memclr8 (Thumb, 0 bytes, Stack size 4 bytes, rt_memclr_w.o(.text), UNUSED)
+
+
    __rt_memclr_w (Thumb, 78 bytes, Stack size 4 bytes, rt_memclr_w.o(.text), UNUSED)
+
+
    _memset_w (Thumb, 0 bytes, Stack size unknown bytes, rt_memclr_w.o(.text), UNUSED)
+

    [Called By]
    • >>   __rt_memclr
+
    
+
+
    __user_setup_stackheap (Thumb, 74 bytes, Stack size 8 bytes, sys_stackheap_outer.o(.text))
+

    [Stack]
    • Max Depth = 8 + Unknown Stack Size
+
    • Call Chain = __user_setup_stackheap
+
    
+
    [Calls]
    • >>   __user_initial_stackheap
+
    • >>   __user_perproc_libspace
+
    
+
    [Called By]
    • >>   __rt_entry_sh
+
    
+
+
    exit (Thumb, 18 bytes, Stack size 8 bytes, exit.o(.text))
+

    [Stack]
    • Max Depth = 8 + Unknown Stack Size
+
    • Call Chain = exit
+
    
+
    [Calls]
    • >>   __rt_exit
+
    
+
    [Called By]
    • >>   __rt_entry_main
+
    
+
+
    __user_libspace (Thumb, 8 bytes, Stack size 0 bytes, libspace.o(.text), UNUSED)
+
+
    __user_perproc_libspace (Thumb, 0 bytes, Stack size 0 bytes, libspace.o(.text))
+

    [Called By]
    • >>   __user_setup_stackheap
+
    
+
+
    __user_perthread_libspace (Thumb, 0 bytes, Stack size 0 bytes, libspace.o(.text), UNUSED)
+
+
    BusFault_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f10x_it.o(i.BusFault_Handler))
+

    [Calls]
    • >>   BusFault_Handler
+
    
+
    [Called By]
    • >>   BusFault_Handler
+
    
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    DebugMon_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f10x_it.o(i.DebugMon_Handler))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    GPIO_Init (Thumb, 156 bytes, Stack size 20 bytes, stm32f10x_gpio.o(i.GPIO_Init))
+

    [Stack]
    • Max Depth = 20
    • Call Chain = GPIO_Init
+
    
+
    [Called By]
    • >>   uart_init
+
    • >>   LED_Init
+
    
+
+
    GPIO_SetBits (Thumb, 4 bytes, Stack size 0 bytes, stm32f10x_gpio.o(i.GPIO_SetBits))
+

    [Called By]
    • >>   LED_Init
+
    
+
+
    HardFault_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f10x_it.o(i.HardFault_Handler))
+

    [Calls]
    • >>   HardFault_Handler
+
    
+
    [Called By]
    • >>   HardFault_Handler
+
    
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    Init (Thumb, 26 bytes, Stack size 8 bytes, main.o(i.Init))
+

    [Stack]
    • Max Depth = 92
    • Call Chain = Init ⇒ uart_init ⇒ USART_Init ⇒ RCC_GetClocksFreq
+
    
+
    [Calls]
    • >>   uart_init
+
    • >>   NVIC_PriorityGroupConfig
+
    • >>   LED_Init
+
    
+
    [Called By]
    • >>   main
+
    
+
+
    Init_task (Thumb, 30 bytes, Stack size 16 bytes, init_task.o(i.Init_task))
+

    [Stack]
    • Max Depth = 312 + Unknown Stack Size
+
    • Call Chain = Init_task ⇒ vTaskStartScheduler ⇒ xTimerCreateTimerTask ⇒ xTaskCreate ⇒ pvPortMalloc ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskCreate
+
    • >>   vTaskStartScheduler
+
    
+
    [Called By]
    • >>   main
+
    
+
+
    LED0_task (Thumb, 32 bytes, Stack size 0 bytes, led_task.o(i.LED0_task))
+

    [Stack]
    • Max Depth = 192 + Unknown Stack Size
+
    • Call Chain = LED0_task ⇒ vTaskDelay ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vTaskDelay
+
    
+
    [Address Reference Count : 1]
    •  led_task.o(i.LED_task_Create)
+
    
+
    LED1_task (Thumb, 36 bytes, Stack size 0 bytes, led_task.o(i.LED1_task))
+

    [Stack]
    • Max Depth = 192 + Unknown Stack Size
+
    • Call Chain = LED1_task ⇒ vTaskDelay ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vTaskDelay
+
    
+
    [Address Reference Count : 1]
    •  led_task.o(i.LED_task_Create)
+
    
+
    LED_Init (Thumb, 86 bytes, Stack size 24 bytes, led.o(i.LED_Init))
+

    [Stack]
    • Max Depth = 44
    • Call Chain = LED_Init ⇒ GPIO_Init
+
    
+
    [Calls]
    • >>   RCC_APB2PeriphClockCmd
+
    • >>   GPIO_SetBits
+
    • >>   GPIO_Init
+
    
+
    [Called By]
    • >>   Init
+
    
+
+
    LED_task_Create (Thumb, 44 bytes, Stack size 16 bytes, led_task.o(i.LED_task_Create))
+

    [Stack]
    • Max Depth = 280 + Unknown Stack Size
+
    • Call Chain = LED_task_Create ⇒ xTaskCreate ⇒ pvPortMalloc ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskCreate
+
    
+
    [Called By]
    • >>   start_task
+
    
+
+
    MemManage_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f10x_it.o(i.MemManage_Handler))
+

    [Calls]
    • >>   MemManage_Handler
+
    
+
    [Called By]
    • >>   MemManage_Handler
+
    
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    NMI_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f10x_it.o(i.NMI_Handler))
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    NVIC_Init (Thumb, 94 bytes, Stack size 12 bytes, misc.o(i.NVIC_Init))
+

    [Stack]
    • Max Depth = 12
    • Call Chain = NVIC_Init
+
    
+
    [Called By]
    • >>   uart_init
+
    
+
+
    NVIC_PriorityGroupConfig (Thumb, 10 bytes, Stack size 0 bytes, misc.o(i.NVIC_PriorityGroupConfig))
+

    [Called By]
    • >>   Init
+
    
+
+
    RCC_APB2PeriphClockCmd (Thumb, 18 bytes, Stack size 0 bytes, stm32f10x_rcc.o(i.RCC_APB2PeriphClockCmd))
+

    [Called By]
    • >>   uart_init
+
    • >>   LED_Init
+
    
+
+
    RCC_GetClocksFreq (Thumb, 132 bytes, Stack size 12 bytes, stm32f10x_rcc.o(i.RCC_GetClocksFreq))
+

    [Stack]
    • Max Depth = 12
    • Call Chain = RCC_GetClocksFreq
+
    
+
    [Called By]
    • >>   USART_Init
+
    
+
+
    SysTick_Handler (Thumb, 20 bytes, Stack size 8 bytes, sys.o(i.SysTick_Handler))
+

    [Stack]
    • Max Depth = 168 + Unknown Stack Size
+
    • Call Chain = SysTick_Handler ⇒ xPortSysTickHandler ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskGetSchedulerState
+
    • >>   xPortSysTickHandler
+
    
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    SystemInit (Thumb, 64 bytes, Stack size 8 bytes, system_stm32f10x.o(i.SystemInit))
+

    [Stack]
    • Max Depth = 20
    • Call Chain = SystemInit ⇒ SetSysClockTo72
+
    
+
    [Calls]
    • >>   SetSysClockTo72
+
    
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(.text)
+
    
+
    USART1_IRQHandler (Thumb, 88 bytes, Stack size 16 bytes, usart.o(i.USART1_IRQHandler))
+

    [Stack]
    • Max Depth = 32
    • Call Chain = USART1_IRQHandler ⇒ USART_GetITStatus
+
    
+
    [Calls]
    • >>   USART_ReceiveData
+
    • >>   USART_GetITStatus
+
    
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    USART_Cmd (Thumb, 20 bytes, Stack size 0 bytes, stm32f10x_usart.o(i.USART_Cmd))
+

    [Called By]
    • >>   uart_init
+
    
+
+
    USART_GetITStatus (Thumb, 62 bytes, Stack size 16 bytes, stm32f10x_usart.o(i.USART_GetITStatus))
+

    [Stack]
    • Max Depth = 16
    • Call Chain = USART_GetITStatus
+
    
+
    [Called By]
    • >>   USART1_IRQHandler
+
    
+
+
    USART_ITConfig (Thumb, 48 bytes, Stack size 8 bytes, stm32f10x_usart.o(i.USART_ITConfig))
+

    [Stack]
    • Max Depth = 8
    • Call Chain = USART_ITConfig
+
    
+
    [Called By]
    • >>   uart_init
+
    
+
+
    USART_Init (Thumb, 166 bytes, Stack size 32 bytes, stm32f10x_usart.o(i.USART_Init))
+

    [Stack]
    • Max Depth = 44
    • Call Chain = USART_Init ⇒ RCC_GetClocksFreq
+
    
+
    [Calls]
    • >>   RCC_GetClocksFreq
+
    
+
    [Called By]
    • >>   uart_init
+
    
+
+
    USART_ReceiveData (Thumb, 8 bytes, Stack size 0 bytes, stm32f10x_usart.o(i.USART_ReceiveData))
+

    [Called By]
    • >>   USART1_IRQHandler
+
    
+
+
    UsageFault_Handler (Thumb, 2 bytes, Stack size 0 bytes, stm32f10x_it.o(i.UsageFault_Handler))
+

    [Calls]
    • >>   UsageFault_Handler
+
    
+
    [Called By]
    • >>   UsageFault_Handler
+
    
+
    [Address Reference Count : 1]
    •  startup_stm32f10x_hd.o(RESET)
+
    
+
    _sys_exit (Thumb, 2 bytes, Stack size 0 bytes, usart.o(i._sys_exit))
+

    [Called By]
    • >>   __rt_exit_exit
+
    
+
+
    fputc (Thumb, 18 bytes, Stack size 0 bytes, usart.o(i.fputc))
+
    [Address Reference Count : 1]
    •  _printf_char_file.o(.text)
+
    
+
    main (Thumb, 14 bytes, Stack size 8 bytes, main.o(i.main))
+

    [Stack]
    • Max Depth = 320 + Unknown Stack Size
+
    • Call Chain = main ⇒ Init_task ⇒ vTaskStartScheduler ⇒ xTimerCreateTimerTask ⇒ xTaskCreate ⇒ pvPortMalloc ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   Init_task
+
    • >>   Init
+
    
+
    [Called By]
    • >>   __rt_entry_main
+
    
+
+
    pvPortMalloc (Thumb, 214 bytes, Stack size 24 bytes, heap_4.o(i.pvPortMalloc))
+

    [Stack]
    • Max Depth = 208 + Unknown Stack Size
+
    • Call Chain = pvPortMalloc ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskResumeAll
+
    • >>   vTaskSuspendAll
+
    • >>   __2printf
+
    • >>   prvInsertBlockIntoFreeList
+
    • >>   prvHeapInit
+
    
+
    [Called By]
    • >>   xTaskCreate
+
    • >>   xQueueGenericCreate
+
    • >>   xTimerCreate
+
    
+
+
    pvTaskIncrementMutexHeldCount (Thumb, 18 bytes, Stack size 0 bytes, tasks.o(i.pvTaskIncrementMutexHeldCount))
+

    [Called By]
    • >>   xQueueGenericReceive
+
    
+
+
    pxPortInitialiseStack (Thumb, 32 bytes, Stack size 8 bytes, port.o(i.pxPortInitialiseStack))
+

    [Stack]
    • Max Depth = 8
    • Call Chain = pxPortInitialiseStack
+
    
+
    [Called By]
    • >>   prvInitialiseNewTask
+
    
+
+
    start_task (Thumb, 26 bytes, Stack size 8 bytes, init_task.o(i.start_task))
+

    [Stack]
    • Max Depth = 288 + Unknown Stack Size
+
    • Call Chain = start_task ⇒ LED_task_Create ⇒ xTaskCreate ⇒ pvPortMalloc ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vTaskDelete
+
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   LED_task_Create
+
    
+
    [Address Reference Count : 1]
    •  init_task.o(i.Init_task)
+
    
+
    uart_init (Thumb, 152 bytes, Stack size 40 bytes, usart.o(i.uart_init))
+

    [Stack]
    • Max Depth = 84
    • Call Chain = uart_init ⇒ USART_Init ⇒ RCC_GetClocksFreq
+
    
+
    [Calls]
    • >>   USART_Init
+
    • >>   USART_ITConfig
+
    • >>   USART_Cmd
+
    • >>   NVIC_Init
+
    • >>   RCC_APB2PeriphClockCmd
+
    • >>   GPIO_Init
+
    
+
    [Called By]
    • >>   Init
+
    
+
+
    uxListRemove (Thumb, 36 bytes, Stack size 0 bytes, list.o(i.uxListRemove))
+

    [Called By]
    • >>   vTaskDelete
+
    • >>   xTaskIncrementTick
+
    • >>   prvCheckTasksWaitingTermination
+
    • >>   prvAddCurrentTaskToDelayedList
+
    • >>   xTaskRemoveFromEventList
+
    • >>   xTaskPriorityDisinherit
+
    • >>   vTaskPriorityInherit
+
    • >>   xTaskResumeAll
+
    • >>   prvSwitchTimerLists
+
    • >>   prvProcessReceivedCommands
+
    • >>   prvProcessExpiredTimer
+
    
+
+
    vListInitialise (Thumb, 22 bytes, Stack size 0 bytes, list.o(i.vListInitialise))
+

    [Called By]
    • >>   prvAddNewTaskToReadyList
+
    • >>   xQueueGenericReset
+
    • >>   prvCheckForValidListAndQueue
+
    
+
+
    vListInitialiseItem (Thumb, 6 bytes, Stack size 0 bytes, list.o(i.vListInitialiseItem))
+

    [Called By]
    • >>   prvInitialiseNewTask
+
    • >>   xTimerCreate
+
    
+
+
    vListInsert (Thumb, 48 bytes, Stack size 12 bytes, list.o(i.vListInsert))
+

    [Stack]
    • Max Depth = 12
    • Call Chain = vListInsert
+
    
+
    [Called By]
    • >>   prvAddCurrentTaskToDelayedList
+
    • >>   vTaskPlaceOnEventList
+
    • >>   prvSwitchTimerLists
+
    • >>   prvInsertTimerInActiveList
+
    
+
+
    vListInsertEnd (Thumb, 24 bytes, Stack size 0 bytes, list.o(i.vListInsertEnd))
+

    [Called By]
    • >>   vTaskDelete
+
    • >>   xTaskIncrementTick
+
    • >>   prvAddNewTaskToReadyList
+
    • >>   prvAddCurrentTaskToDelayedList
+
    • >>   xTaskRemoveFromEventList
+
    • >>   xTaskPriorityDisinherit
+
    • >>   vTaskPriorityInherit
+
    • >>   vTaskPlaceOnEventListRestricted
+
    • >>   xTaskResumeAll
+
    
+
+
    vPortEnterCritical (Thumb, 50 bytes, Stack size 0 bytes, port.o(i.vPortEnterCritical))
+

    [Stack]
    • Max Depth = 128 + Unknown Stack Size
+
    • Call Chain = vPortEnterCritical ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   __2printf
+
    
+
    [Called By]
    • >>   vTaskDelete
+
    • >>   start_task
+
    • >>   prvCheckTasksWaitingTermination
+
    • >>   prvAddNewTaskToReadyList
+
    • >>   xTaskCheckForTimeOut
+
    • >>   xQueueGenericSend
+
    • >>   xQueueGenericReset
+
    • >>   xQueueGenericReceive
+
    • >>   vQueueWaitForMessageRestricted
+
    • >>   prvUnlockQueue
+
    • >>   prvIsQueueEmpty
+
    • >>   xTaskResumeAll
+
    • >>   prvCheckForValidListAndQueue
+
    
+
+
    vPortExitCritical (Thumb, 34 bytes, Stack size 8 bytes, port.o(i.vPortExitCritical))
+

    [Stack]
    • Max Depth = 136 + Unknown Stack Size
+
    • Call Chain = vPortExitCritical ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   __2printf
+
    
+
    [Called By]
    • >>   vTaskDelete
+
    • >>   start_task
+
    • >>   prvCheckTasksWaitingTermination
+
    • >>   prvAddNewTaskToReadyList
+
    • >>   xTaskCheckForTimeOut
+
    • >>   xQueueGenericSend
+
    • >>   xQueueGenericReset
+
    • >>   xQueueGenericReceive
+
    • >>   vQueueWaitForMessageRestricted
+
    • >>   prvUnlockQueue
+
    • >>   prvIsQueueEmpty
+
    • >>   xTaskResumeAll
+
    • >>   prvCheckForValidListAndQueue
+
    
+
+
    vPortFree (Thumb, 94 bytes, Stack size 16 bytes, heap_4.o(i.vPortFree))
+

    [Stack]
    • Max Depth = 200 + Unknown Stack Size
+
    • Call Chain = vPortFree ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskResumeAll
+
    • >>   vTaskSuspendAll
+
    • >>   __2printf
+
    • >>   prvInsertBlockIntoFreeList
+
    
+
    [Called By]
    • >>   xTaskCreate
+
    • >>   prvDeleteTCB
+
    • >>   prvProcessReceivedCommands
+
    
+
+
    vPortSetupTimerInterrupt (Thumb, 26 bytes, Stack size 0 bytes, port.o(i.vPortSetupTimerInterrupt))
+

    [Called By]
    • >>   xPortStartScheduler
+
    
+
+
    vPortValidateInterruptPriority (Thumb, 70 bytes, Stack size 8 bytes, port.o(i.vPortValidateInterruptPriority))
+

    [Stack]
    • Max Depth = 136 + Unknown Stack Size
+
    • Call Chain = vPortValidateInterruptPriority ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   __2printf
+
    • >>   vPortGetIPSR
+
    
+
    [Called By]
    • >>   xQueueGenericSendFromISR
+
    
+
+
    vQueueAddToRegistry (Thumb, 32 bytes, Stack size 8 bytes, queue.o(i.vQueueAddToRegistry))
+

    [Stack]
    • Max Depth = 8
    • Call Chain = vQueueAddToRegistry
+
    
+
    [Called By]
    • >>   prvCheckForValidListAndQueue
+
    
+
+
    vQueueWaitForMessageRestricted (Thumb, 68 bytes, Stack size 16 bytes, queue.o(i.vQueueWaitForMessageRestricted))
+

    [Stack]
    • Max Depth = 240 + Unknown Stack Size
+
    • Call Chain = vQueueWaitForMessageRestricted ⇒ prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   vTaskPlaceOnEventListRestricted
+
    • >>   prvUnlockQueue
+
    
+
    [Called By]
    • >>   prvProcessTimerOrBlockTask
+
    
+
+
    vTaskDelay (Thumb, 62 bytes, Stack size 8 bytes, tasks.o(i.vTaskDelay))
+

    [Stack]
    • Max Depth = 192 + Unknown Stack Size
+
    • Call Chain = vTaskDelay ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   prvAddCurrentTaskToDelayedList
+
    • >>   xTaskResumeAll
+
    • >>   vTaskSuspendAll
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   LED1_task
+
    • >>   LED0_task
+
    
+
+
    vTaskDelete (Thumb, 152 bytes, Stack size 16 bytes, tasks.o(i.vTaskDelete))
+

    [Stack]
    • Max Depth = 224 + Unknown Stack Size
+
    • Call Chain = vTaskDelete ⇒ prvDeleteTCB ⇒ vPortFree ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   prvResetNextTaskUnblockTime
+
    • >>   prvDeleteTCB
+
    • >>   vListInsertEnd
+
    • >>   uxListRemove
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   start_task
+
    
+
+
    vTaskMissedYield (Thumb, 8 bytes, Stack size 0 bytes, tasks.o(i.vTaskMissedYield))
+

    [Called By]
    • >>   prvUnlockQueue
+
    
+
+
    vTaskPlaceOnEventList (Thumb, 44 bytes, Stack size 16 bytes, tasks.o(i.vTaskPlaceOnEventList))
+

    [Stack]
    • Max Depth = 144 + Unknown Stack Size
+
    • Call Chain = vTaskPlaceOnEventList ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   prvAddCurrentTaskToDelayedList
+
    • >>   vListInsert
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   xQueueGenericSend
+
    • >>   xQueueGenericReceive
+
    
+
+
    vTaskPlaceOnEventListRestricted (Thumb, 52 bytes, Stack size 16 bytes, tasks.o(i.vTaskPlaceOnEventListRestricted))
+

    [Stack]
    • Max Depth = 144 + Unknown Stack Size
+
    • Call Chain = vTaskPlaceOnEventListRestricted ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   prvAddCurrentTaskToDelayedList
+
    • >>   vListInsertEnd
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   vQueueWaitForMessageRestricted
+
    
+
+
    vTaskPriorityInherit (Thumb, 124 bytes, Stack size 16 bytes, tasks.o(i.vTaskPriorityInherit))
+

    [Stack]
    • Max Depth = 16
    • Call Chain = vTaskPriorityInherit
+
    
+
    [Calls]
    • >>   vListInsertEnd
+
    • >>   uxListRemove
+
    
+
    [Called By]
    • >>   xQueueGenericReceive
+
    
+
+
    vTaskSetTimeOutState (Thumb, 30 bytes, Stack size 8 bytes, tasks.o(i.vTaskSetTimeOutState))
+

    [Stack]
    • Max Depth = 136 + Unknown Stack Size
+
    • Call Chain = vTaskSetTimeOutState ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   __2printf
+
    
+
    [Called By]
    • >>   xTaskCheckForTimeOut
+
    • >>   xQueueGenericSend
+
    • >>   xQueueGenericReceive
+
    
+
+
    vTaskStartScheduler (Thumb, 96 bytes, Stack size 16 bytes, tasks.o(i.vTaskStartScheduler))
+

    [Stack]
    • Max Depth = 296 + Unknown Stack Size
+
    • Call Chain = vTaskStartScheduler ⇒ xTimerCreateTimerTask ⇒ xTaskCreate ⇒ pvPortMalloc ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskCreate
+
    • >>   __2printf
+
    • >>   xTimerCreateTimerTask
+
    • >>   xPortStartScheduler
+
    
+
    [Called By]
    • >>   Init_task
+
    
+
+
    vTaskSuspendAll (Thumb, 10 bytes, Stack size 0 bytes, tasks.o(i.vTaskSuspendAll))
+

    [Called By]
    • >>   vTaskDelay
+
    • >>   prvCheckTasksWaitingTermination
+
    • >>   xQueueGenericSend
+
    • >>   xQueueGenericReceive
+
    • >>   vPortFree
+
    • >>   pvPortMalloc
+
    • >>   prvProcessTimerOrBlockTask
+
    
+
+
    vTaskSwitchContext (Thumb, 80 bytes, Stack size 16 bytes, tasks.o(i.vTaskSwitchContext))
+

    [Stack]
    • Max Depth = 144 + Unknown Stack Size
+
    • Call Chain = vTaskSwitchContext ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   __2printf
+
    
+
    [Called By]
    • >>   PendSV_Handler
+
    
+
+
    xPortStartScheduler (Thumb, 108 bytes, Stack size 16 bytes, port.o(i.xPortStartScheduler))
+

    [Stack]
    • Max Depth = 16
    • Call Chain = xPortStartScheduler
+
    
+
    [Calls]
    • >>   vPortSetupTimerInterrupt
+
    • >>   __asm___6_port_c_39a90d8d__prvStartFirstTask
+
    
+
    [Called By]
    • >>   vTaskStartScheduler
+
    
+
+
    xPortSysTickHandler (Thumb, 38 bytes, Stack size 8 bytes, port.o(i.xPortSysTickHandler))
+

    [Stack]
    • Max Depth = 160 + Unknown Stack Size
+
    • Call Chain = xPortSysTickHandler ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskIncrementTick
+
    
+
    [Called By]
    • >>   SysTick_Handler
+
    
+
+
    xQueueGenericCreate (Thumb, 82 bytes, Stack size 24 bytes, queue.o(i.xQueueGenericCreate))
+

    [Stack]
    • Max Depth = 232 + Unknown Stack Size
+
    • Call Chain = xQueueGenericCreate ⇒ pvPortMalloc ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xQueueGenericReset
+
    • >>   pvPortMalloc
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   prvCheckForValidListAndQueue
+
    
+
+
    xQueueGenericReceive (Thumb, 348 bytes, Stack size 64 bytes, queue.o(i.xQueueGenericReceive))
+

    [Stack]
    • Max Depth = 288 + Unknown Stack Size
+
    • Call Chain = xQueueGenericReceive ⇒ prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskGetSchedulerState
+
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   xTaskRemoveFromEventList
+
    • >>   xTaskCheckForTimeOut
+
    • >>   vTaskSetTimeOutState
+
    • >>   vTaskPriorityInherit
+
    • >>   vTaskPlaceOnEventList
+
    • >>   pvTaskIncrementMutexHeldCount
+
    • >>   prvUnlockQueue
+
    • >>   prvIsQueueEmpty
+
    • >>   prvCopyDataFromQueue
+
    • >>   xTaskResumeAll
+
    • >>   vTaskSuspendAll
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   prvProcessReceivedCommands
+
    
+
+
    xQueueGenericReset (Thumb, 128 bytes, Stack size 16 bytes, queue.o(i.xQueueGenericReset))
+

    [Stack]
    • Max Depth = 168 + Unknown Stack Size
+
    • Call Chain = xQueueGenericReset ⇒ xTaskRemoveFromEventList ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   xTaskRemoveFromEventList
+
    • >>   vListInitialise
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   xQueueGenericCreate
+
    
+
+
    xQueueGenericSend (Thumb, 350 bytes, Stack size 64 bytes, queue.o(i.xQueueGenericSend))
+

    [Stack]
    • Max Depth = 288 + Unknown Stack Size
+
    • Call Chain = xQueueGenericSend ⇒ prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskGetSchedulerState
+
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   xTaskRemoveFromEventList
+
    • >>   xTaskCheckForTimeOut
+
    • >>   vTaskSetTimeOutState
+
    • >>   vTaskPlaceOnEventList
+
    • >>   prvUnlockQueue
+
    • >>   prvNotifyQueueSetContainer
+
    • >>   prvCopyDataToQueue
+
    • >>   xTaskResumeAll
+
    • >>   vTaskSuspendAll
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   xTimerGenericCommand
+
    
+
+
    xQueueGenericSendFromISR (Thumb, 188 bytes, Stack size 32 bytes, queue.o(i.xQueueGenericSendFromISR))
+

    [Stack]
    • Max Depth = 232 + Unknown Stack Size
+
    • Call Chain = xQueueGenericSendFromISR ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskRemoveFromEventList
+
    • >>   vPortValidateInterruptPriority
+
    • >>   prvNotifyQueueSetContainer
+
    • >>   prvCopyDataToQueue
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   xTimerGenericCommand
+
    
+
+
    xTaskCheckForTimeOut (Thumb, 94 bytes, Stack size 16 bytes, tasks.o(i.xTaskCheckForTimeOut))
+

    [Stack]
    • Max Depth = 152 + Unknown Stack Size
+
    • Call Chain = xTaskCheckForTimeOut ⇒ vPortExitCritical ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   vTaskSetTimeOutState
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   xQueueGenericSend
+
    • >>   xQueueGenericReceive
+
    
+
+
    xTaskCreate (Thumb, 86 bytes, Stack size 56 bytes, tasks.o(i.xTaskCreate))
+

    [Stack]
    • Max Depth = 264 + Unknown Stack Size
+
    • Call Chain = xTaskCreate ⇒ pvPortMalloc ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   prvInitialiseNewTask
+
    • >>   prvAddNewTaskToReadyList
+
    • >>   vPortFree
+
    • >>   pvPortMalloc
+
    
+
    [Called By]
    • >>   vTaskStartScheduler
+
    • >>   LED_task_Create
+
    • >>   Init_task
+
    • >>   xTimerCreateTimerTask
+
    
+
+
    xTaskGetSchedulerState (Thumb, 22 bytes, Stack size 0 bytes, tasks.o(i.xTaskGetSchedulerState))
+

    [Called By]
    • >>   SysTick_Handler
+
    • >>   xQueueGenericSend
+
    • >>   xQueueGenericReceive
+
    • >>   xTimerGenericCommand
+
    
+
+
    xTaskGetTickCount (Thumb, 6 bytes, Stack size 0 bytes, tasks.o(i.xTaskGetTickCount))
+

    [Called By]
    • >>   prvSampleTimeNow
+
    
+
+
    xTaskIncrementTick (Thumb, 188 bytes, Stack size 24 bytes, tasks.o(i.xTaskIncrementTick))
+

    [Stack]
    • Max Depth = 152 + Unknown Stack Size
+
    • Call Chain = xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   prvResetNextTaskUnblockTime
+
    • >>   vListInsertEnd
+
    • >>   uxListRemove
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   xPortSysTickHandler
+
    • >>   xTaskResumeAll
+
    
+
+
    xTaskPriorityDisinherit (Thumb, 136 bytes, Stack size 16 bytes, tasks.o(i.xTaskPriorityDisinherit))
+

    [Stack]
    • Max Depth = 144 + Unknown Stack Size
+
    • Call Chain = xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vListInsertEnd
+
    • >>   uxListRemove
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   prvCopyDataToQueue
+
    
+
+
    xTaskRemoveFromEventList (Thumb, 102 bytes, Stack size 24 bytes, tasks.o(i.xTaskRemoveFromEventList))
+

    [Stack]
    • Max Depth = 152 + Unknown Stack Size
+
    • Call Chain = xTaskRemoveFromEventList ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vListInsertEnd
+
    • >>   uxListRemove
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   xQueueGenericSendFromISR
+
    • >>   xQueueGenericSend
+
    • >>   xQueueGenericReset
+
    • >>   xQueueGenericReceive
+
    • >>   prvUnlockQueue
+
    • >>   prvNotifyQueueSetContainer
+
    
+
+
    xTaskResumeAll (Thumb, 180 bytes, Stack size 32 bytes, tasks.o(i.xTaskResumeAll))
+

    [Stack]
    • Max Depth = 184 + Unknown Stack Size
+
    • Call Chain = xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   xTaskIncrementTick
+
    • >>   prvResetNextTaskUnblockTime
+
    • >>   vListInsertEnd
+
    • >>   uxListRemove
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   vTaskDelay
+
    • >>   prvCheckTasksWaitingTermination
+
    • >>   xQueueGenericSend
+
    • >>   xQueueGenericReceive
+
    • >>   vPortFree
+
    • >>   pvPortMalloc
+
    • >>   prvProcessTimerOrBlockTask
+
    
+
+
    xTimerCreate (Thumb, 74 bytes, Stack size 32 bytes, timers.o(i.xTimerCreate), UNUSED)
+

    [Calls]
    • >>   vListInitialiseItem
+
    • >>   pvPortMalloc
+
    • >>   __2printf
+
    • >>   prvCheckForValidListAndQueue
+
    
+
+
    xTimerCreateTimerTask (Thumb, 58 bytes, Stack size 16 bytes, timers.o(i.xTimerCreateTimerTask))
+

    [Stack]
    • Max Depth = 280 + Unknown Stack Size
+
    • Call Chain = xTimerCreateTimerTask ⇒ xTaskCreate ⇒ pvPortMalloc ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskCreate
+
    • >>   __2printf
+
    • >>   prvCheckForValidListAndQueue
+
    
+
    [Called By]
    • >>   vTaskStartScheduler
+
    
+
+
    xTimerGenericCommand (Thumb, 98 bytes, Stack size 48 bytes, timers.o(i.xTimerGenericCommand))
+

    [Stack]
    • Max Depth = 336 + Unknown Stack Size
+
    • Call Chain = xTimerGenericCommand ⇒ xQueueGenericSend ⇒ prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskGetSchedulerState
+
    • >>   xQueueGenericSendFromISR
+
    • >>   xQueueGenericSend
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   prvSwitchTimerLists
+
    • >>   prvProcessReceivedCommands
+
    • >>   prvProcessExpiredTimer
+
    
+
    
+
    
+Local Symbols
+
    
+
    SetSysClockTo72 (Thumb, 160 bytes, Stack size 12 bytes, system_stm32f10x.o(i.SetSysClockTo72))
+

    [Stack]
    • Max Depth = 12
    • Call Chain = SetSysClockTo72
+
    
+
    [Called By]
    • >>   SystemInit
+
    
+
+
    prvCopyDataFromQueue (Thumb, 38 bytes, Stack size 8 bytes, queue.o(i.prvCopyDataFromQueue))
+

    [Stack]
    • Max Depth = 8
    • Call Chain = prvCopyDataFromQueue
+
    
+
    [Calls]
    • >>   __aeabi_memcpy
+
    
+
    [Called By]
    • >>   xQueueGenericReceive
+
    
+
+
    prvCopyDataToQueue (Thumb, 108 bytes, Stack size 24 bytes, queue.o(i.prvCopyDataToQueue))
+

    [Stack]
    • Max Depth = 168 + Unknown Stack Size
+
    • Call Chain = prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskPriorityDisinherit
+
    • >>   __aeabi_memcpy
+
    
+
    [Called By]
    • >>   xQueueGenericSendFromISR
+
    • >>   xQueueGenericSend
+
    • >>   prvNotifyQueueSetContainer
+
    
+
+
    prvIsQueueEmpty (Thumb, 26 bytes, Stack size 8 bytes, queue.o(i.prvIsQueueEmpty))
+

    [Stack]
    • Max Depth = 144 + Unknown Stack Size
+
    • Call Chain = prvIsQueueEmpty ⇒ vPortExitCritical ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    
+
    [Called By]
    • >>   xQueueGenericReceive
+
    
+
+
    prvNotifyQueueSetContainer (Thumb, 108 bytes, Stack size 32 bytes, queue.o(i.prvNotifyQueueSetContainer))
+

    [Stack]
    • Max Depth = 200 + Unknown Stack Size
+
    • Call Chain = prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskRemoveFromEventList
+
    • >>   prvCopyDataToQueue
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   xQueueGenericSendFromISR
+
    • >>   xQueueGenericSend
+
    • >>   prvUnlockQueue
+
    
+
+
    prvUnlockQueue (Thumb, 120 bytes, Stack size 24 bytes, queue.o(i.prvUnlockQueue))
+

    [Stack]
    • Max Depth = 224 + Unknown Stack Size
+
    • Call Chain = prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   xTaskRemoveFromEventList
+
    • >>   vTaskMissedYield
+
    • >>   prvNotifyQueueSetContainer
+
    
+
    [Called By]
    • >>   xQueueGenericSend
+
    • >>   xQueueGenericReceive
+
    • >>   vQueueWaitForMessageRestricted
+
    
+
+
    prvAddCurrentTaskToDelayedList (Thumb, 102 bytes, Stack size 24 bytes, tasks.o(i.prvAddCurrentTaskToDelayedList))
+

    [Stack]
    • Max Depth = 36
    • Call Chain = prvAddCurrentTaskToDelayedList ⇒ vListInsert
+
    
+
    [Calls]
    • >>   vListInsertEnd
+
    • >>   vListInsert
+
    • >>   uxListRemove
+
    
+
    [Called By]
    • >>   vTaskDelay
+
    • >>   vTaskPlaceOnEventListRestricted
+
    • >>   vTaskPlaceOnEventList
+
    
+
+
    prvAddNewTaskToReadyList (Thumb, 192 bytes, Stack size 24 bytes, tasks.o(i.prvAddNewTaskToReadyList))
+

    [Stack]
    • Max Depth = 160 + Unknown Stack Size
+
    • Call Chain = prvAddNewTaskToReadyList ⇒ vPortExitCritical ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   vListInsertEnd
+
    • >>   vListInitialise
+
    
+
    [Called By]
    • >>   xTaskCreate
+
    
+
+
    prvCheckTasksWaitingTermination (Thumb, 74 bytes, Stack size 16 bytes, tasks.o(i.prvCheckTasksWaitingTermination))
+

    [Stack]
    • Max Depth = 224 + Unknown Stack Size
+
    • Call Chain = prvCheckTasksWaitingTermination ⇒ prvDeleteTCB ⇒ vPortFree ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   prvDeleteTCB
+
    • >>   uxListRemove
+
    • >>   xTaskResumeAll
+
    • >>   vTaskSuspendAll
+
    
+
    [Called By]
    • >>   prvIdleTask
+
    
+
+
    prvDeleteTCB (Thumb, 20 bytes, Stack size 8 bytes, tasks.o(i.prvDeleteTCB))
+

    [Stack]
    • Max Depth = 208 + Unknown Stack Size
+
    • Call Chain = prvDeleteTCB ⇒ vPortFree ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vPortFree
+
    
+
    [Called By]
    • >>   vTaskDelete
+
    • >>   prvCheckTasksWaitingTermination
+
    
+
+
    prvIdleTask (Thumb, 30 bytes, Stack size 0 bytes, tasks.o(i.prvIdleTask))
+

    [Stack]
    • Max Depth = 224 + Unknown Stack Size
+
    • Call Chain = prvIdleTask ⇒ prvCheckTasksWaitingTermination ⇒ prvDeleteTCB ⇒ vPortFree ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   prvCheckTasksWaitingTermination
+
    
+
    [Address Reference Count : 1]
    •  tasks.o(i.vTaskStartScheduler)
+
    
+
    prvInitialiseNewTask (Thumb, 154 bytes, Stack size 32 bytes, tasks.o(i.prvInitialiseNewTask))
+

    [Stack]
    • Max Depth = 160 + Unknown Stack Size
+
    • Call Chain = prvInitialiseNewTask ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   pxPortInitialiseStack
+
    • >>   vListInitialiseItem
+
    • >>   __aeabi_memset
+
    • >>   __2printf
+
    
+
    [Called By]
    • >>   xTaskCreate
+
    
+
+
    prvResetNextTaskUnblockTime (Thumb, 26 bytes, Stack size 0 bytes, tasks.o(i.prvResetNextTaskUnblockTime))
+

    [Called By]
    • >>   vTaskDelete
+
    • >>   xTaskIncrementTick
+
    • >>   xTaskResumeAll
+
    
+
+
    prvCheckForValidListAndQueue (Thumb, 62 bytes, Stack size 8 bytes, timers.o(i.prvCheckForValidListAndQueue))
+

    [Stack]
    • Max Depth = 240 + Unknown Stack Size
+
    • Call Chain = prvCheckForValidListAndQueue ⇒ xQueueGenericCreate ⇒ pvPortMalloc ⇒ xTaskResumeAll ⇒ xTaskIncrementTick ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vPortExitCritical
+
    • >>   vPortEnterCritical
+
    • >>   xQueueGenericCreate
+
    • >>   vQueueAddToRegistry
+
    • >>   vListInitialise
+
    
+
    [Called By]
    • >>   xTimerCreate
+
    • >>   xTimerCreateTimerTask
+
    
+
+
    prvInsertTimerInActiveList (Thumb, 52 bytes, Stack size 16 bytes, timers.o(i.prvInsertTimerInActiveList))
+

    [Stack]
    • Max Depth = 28
    • Call Chain = prvInsertTimerInActiveList ⇒ vListInsert
+
    
+
    [Calls]
    • >>   vListInsert
+
    
+
    [Called By]
    • >>   prvProcessReceivedCommands
+
    • >>   prvProcessExpiredTimer
+
    
+
+
    prvProcessExpiredTimer (Thumb, 86 bytes, Stack size 24 bytes, timers.o(i.prvProcessExpiredTimer))
+

    [Stack]
    • Max Depth = 360 + Unknown Stack Size
+
    • Call Chain = prvProcessExpiredTimer ⇒ xTimerGenericCommand ⇒ xQueueGenericSend ⇒ prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   uxListRemove
+
    • >>   __2printf
+
    • >>   xTimerGenericCommand
+
    • >>   prvInsertTimerInActiveList
+
    
+
    [Called By]
    • >>   prvProcessTimerOrBlockTask
+
    
+
+
    prvProcessReceivedCommands (Thumb, 196 bytes, Stack size 40 bytes, timers.o(i.prvProcessReceivedCommands))
+

    [Stack]
    • Max Depth = 416 + Unknown Stack Size
+
    • Call Chain = prvProcessReceivedCommands ⇒ prvSampleTimeNow ⇒ prvSwitchTimerLists ⇒ xTimerGenericCommand ⇒ xQueueGenericSend ⇒ prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xQueueGenericReceive
+
    • >>   uxListRemove
+
    • >>   vPortFree
+
    • >>   __2printf
+
    • >>   xTimerGenericCommand
+
    • >>   prvSampleTimeNow
+
    • >>   prvInsertTimerInActiveList
+
    
+
    [Called By]
    • >>   prvTimerTask
+
    
+
+
    prvProcessTimerOrBlockTask (Thumb, 98 bytes, Stack size 24 bytes, timers.o(i.prvProcessTimerOrBlockTask))
+

    [Stack]
    • Max Depth = 400 + Unknown Stack Size
+
    • Call Chain = prvProcessTimerOrBlockTask ⇒ prvSampleTimeNow ⇒ prvSwitchTimerLists ⇒ xTimerGenericCommand ⇒ xQueueGenericSend ⇒ prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vQueueWaitForMessageRestricted
+
    • >>   xTaskResumeAll
+
    • >>   vTaskSuspendAll
+
    • >>   prvSampleTimeNow
+
    • >>   prvProcessExpiredTimer
+
    
+
    [Called By]
    • >>   prvTimerTask
+
    
+
+
    prvSampleTimeNow (Thumb, 36 bytes, Stack size 16 bytes, timers.o(i.prvSampleTimeNow))
+

    [Stack]
    • Max Depth = 376 + Unknown Stack Size
+
    • Call Chain = prvSampleTimeNow ⇒ prvSwitchTimerLists ⇒ xTimerGenericCommand ⇒ xQueueGenericSend ⇒ prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   xTaskGetTickCount
+
    • >>   prvSwitchTimerLists
+
    
+
    [Called By]
    • >>   prvProcessTimerOrBlockTask
+
    • >>   prvProcessReceivedCommands
+
    
+
+
    prvSwitchTimerLists (Thumb, 100 bytes, Stack size 24 bytes, timers.o(i.prvSwitchTimerLists))
+

    [Stack]
    • Max Depth = 360 + Unknown Stack Size
+
    • Call Chain = prvSwitchTimerLists ⇒ xTimerGenericCommand ⇒ xQueueGenericSend ⇒ prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   vListInsert
+
    • >>   uxListRemove
+
    • >>   __2printf
+
    • >>   xTimerGenericCommand
+
    
+
    [Called By]
    • >>   prvSampleTimeNow
+
    
+
+
    prvTimerTask (Thumb, 34 bytes, Stack size 0 bytes, timers.o(i.prvTimerTask))
+

    [Stack]
    • Max Depth = 416 + Unknown Stack Size
+
    • Call Chain = prvTimerTask ⇒ prvProcessReceivedCommands ⇒ prvSampleTimeNow ⇒ prvSwitchTimerLists ⇒ xTimerGenericCommand ⇒ xQueueGenericSend ⇒ prvUnlockQueue ⇒ prvNotifyQueueSetContainer ⇒ prvCopyDataToQueue ⇒ xTaskPriorityDisinherit ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   prvProcessTimerOrBlockTask
+
    • >>   prvProcessReceivedCommands
+
    
+
    [Address Reference Count : 1]
    •  timers.o(i.xTimerCreateTimerTask)
+
    
+
    prvHeapInit (Thumb, 66 bytes, Stack size 0 bytes, heap_4.o(i.prvHeapInit))
+

    [Called By]
    • >>   pvPortMalloc
+
    
+
+
    prvInsertBlockIntoFreeList (Thumb, 72 bytes, Stack size 12 bytes, heap_4.o(i.prvInsertBlockIntoFreeList))
+

    [Stack]
    • Max Depth = 12
    • Call Chain = prvInsertBlockIntoFreeList
+
    
+
    [Called By]
    • >>   vPortFree
+
    • >>   pvPortMalloc
+
    
+
+
    prvTaskExitError (Thumb, 34 bytes, Stack size 0 bytes, port.o(i.prvTaskExitError))
+

    [Stack]
    • Max Depth = 128 + Unknown Stack Size
+
    • Call Chain = prvTaskExitError ⇒ __2printf ⇒ _printf_char_file ⇒ _printf_char_common ⇒ __printf
+
    
+
    [Calls]
    • >>   __2printf
+
    
+
    [Address Reference Count : 1]
    •  port.o(i.pxPortInitialiseStack)
+
    
+
    _printf_input_char (Thumb, 10 bytes, Stack size 0 bytes, _printf_char_common.o(.text))
+
    [Address Reference Count : 1]
    •  _printf_char_common.o(.text)
+
    
+
    
+Undefined Global Symbols
+
    
diff --git a/Program/XLLC/OBJ/LED.lnp b/Program/XLLC/OBJ/LED.lnp
new file mode 100644
index 0000000000000000000000000000000000000000..e2a4f83a32fd25959df4d3432002d00acc97cb2b
--- /dev/null
+++ b/Program/XLLC/OBJ/LED.lnp
@@ -0,0 +1,45 @@
+--cpu Cortex-M3
+"..\obj\main.o"
+"..\obj\stm32f10x_it.o"
+"..\obj\system_stm32f10x.o"
+"..\obj\init_task.o"
+"..\obj\led_task.o"
+"..\obj\led.o"
+"..\obj\sys.o"
+"..\obj\usart.o"
+"..\obj\core_cm3.o"
+"..\obj\startup_stm32f10x_hd.o"
+"..\obj\misc.o"
+"..\obj\stm32f10x_gpio.o"
+"..\obj\stm32f10x_dbgmcu.o"
+"..\obj\stm32f10x_rcc.o"
+"..\obj\stm32f10x_usart.o"
+"..\obj\stm32f10x_adc.o"
+"..\obj\stm32f10x_bkp.o"
+"..\obj\stm32f10x_can.o"
+"..\obj\stm32f10x_cec.o"
+"..\obj\stm32f10x_crc.o"
+"..\obj\stm32f10x_dac.o"
+"..\obj\stm32f10x_dma.o"
+"..\obj\stm32f10x_exti.o"
+"..\obj\stm32f10x_flash.o"
+"..\obj\stm32f10x_fsmc.o"
+"..\obj\stm32f10x_i2c.o"
+"..\obj\stm32f10x_iwdg.o"
+"..\obj\stm32f10x_pwr.o"
+"..\obj\stm32f10x_rtc.o"
+"..\obj\stm32f10x_sdio.o"
+"..\obj\stm32f10x_spi.o"
+"..\obj\stm32f10x_tim.o"
+"..\obj\stm32f10x_wwdg.o"
+"..\obj\croutine.o"
+"..\obj\event_groups.o"
+"..\obj\list.o"
+"..\obj\queue.o"
+"..\obj\tasks.o"
+"..\obj\timers.o"
+"..\obj\heap_4.o"
+"..\obj\port.o"
+--ro-base 0x08000000 --entry 0x08000000 --rw-base 0x20000000 --entry Reset_Handler --first __Vectors --strict --summary_stderr --info summarysizes --map --load_addr_map_info --xref --callgraph --symbols
+--info sizes --info totals --info unused --info veneers
+--list "..\OBJ\LED.map" -o ..\OBJ\LED.axf
\ No newline at end of file
diff --git a/Program/XLLC/OBJ/LED.map b/Program/XLLC/OBJ/LED.map
new file mode 100644
index 0000000000000000000000000000000000000000..e51775acbe292b98a517e0a1659f44b8589566a2
--- /dev/null
+++ b/Program/XLLC/OBJ/LED.map
@@ -0,0 +1,2654 @@
+Component: ARM Compiler 5.06 update 7 (build 960) Tool: armlink [4d3601]
+
+==============================================================================
+
+Section Cross References
+
+    main.o(i.Init) refers to misc.o(i.NVIC_PriorityGroupConfig) for NVIC_PriorityGroupConfig
+    main.o(i.Init) refers to usart.o(i.uart_init) for uart_init
+    main.o(i.Init) refers to led.o(i.LED_Init) for LED_Init
+    main.o(i.main) refers to main.o(i.Init) for Init
+    main.o(i.main) refers to init_task.o(i.Init_task) for Init_task
+    system_stm32f10x.o(i.SystemCoreClockUpdate) refers to system_stm32f10x.o(.data) for .data
+    system_stm32f10x.o(i.SystemInit) refers to system_stm32f10x.o(i.SetSysClockTo72) for SetSysClockTo72
+    init_task.o(i.Init_task) refers to tasks.o(i.xTaskCreate) for xTaskCreate
+    init_task.o(i.Init_task) refers to tasks.o(i.vTaskStartScheduler) for vTaskStartScheduler
+    init_task.o(i.Init_task) refers to init_task.o(.data) for .data
+    init_task.o(i.Init_task) refers to init_task.o(i.start_task) for start_task
+    init_task.o(i.start_task) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    init_task.o(i.start_task) refers to led_task.o(i.LED_task_Create) for LED_task_Create
+    init_task.o(i.start_task) refers to tasks.o(i.vTaskDelete) for vTaskDelete
+    init_task.o(i.start_task) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    init_task.o(i.start_task) refers to init_task.o(.data) for .data
+    led_task.o(i.LED0_task) refers to tasks.o(i.vTaskDelay) for vTaskDelay
+    led_task.o(i.LED1_task) refers to tasks.o(i.vTaskDelay) for vTaskDelay
+    led_task.o(i.LED_task_Create) refers to tasks.o(i.xTaskCreate) for xTaskCreate
+    led_task.o(i.LED_task_Create) refers to led_task.o(.data) for .data
+    led_task.o(i.LED_task_Create) refers to led_task.o(i.LED0_task) for LED0_task
+    led_task.o(i.LED_task_Create) refers to led_task.o(i.LED1_task) for LED1_task
+    led.o(i.LED_Init) refers to stm32f10x_rcc.o(i.RCC_APB2PeriphClockCmd) for RCC_APB2PeriphClockCmd
+    led.o(i.LED_Init) refers to stm32f10x_gpio.o(i.GPIO_Init) for GPIO_Init
+    led.o(i.LED_Init) refers to stm32f10x_gpio.o(i.GPIO_SetBits) for GPIO_SetBits
+    sys.o(i.SysTick_Handler) refers to tasks.o(i.xTaskGetSchedulerState) for xTaskGetSchedulerState
+    sys.o(i.SysTick_Handler) refers to port.o(i.xPortSysTickHandler) for xPortSysTickHandler
+    sys.o(i.delay_ms) refers to sys.o(i.SysTick_Config) for SysTick_Config
+    sys.o(i.delay_us) refers to sys.o(i.SysTick_Config) for SysTick_Config
+    usart.o(i.USART1_IRQHandler) refers (Special) to use_no_semi_2.o(.text) for __use_no_semihosting
+    usart.o(i.USART1_IRQHandler) refers to stm32f10x_usart.o(i.USART_GetITStatus) for USART_GetITStatus
+    usart.o(i.USART1_IRQHandler) refers to stm32f10x_usart.o(i.USART_ReceiveData) for USART_ReceiveData
+    usart.o(i.USART1_IRQHandler) refers to usart.o(.data) for .data
+    usart.o(i.USART1_IRQHandler) refers to usart.o(.bss) for .bss
+    usart.o(i._sys_exit) refers (Special) to use_no_semi_2.o(.text) for __use_no_semihosting
+    usart.o(i.fputc) refers (Special) to use_no_semi_2.o(.text) for __use_no_semihosting
+    usart.o(i.uart_init) refers (Special) to use_no_semi_2.o(.text) for __use_no_semihosting
+    usart.o(i.uart_init) refers to stm32f10x_rcc.o(i.RCC_APB2PeriphClockCmd) for RCC_APB2PeriphClockCmd
+    usart.o(i.uart_init) refers to stm32f10x_gpio.o(i.GPIO_Init) for GPIO_Init
+    usart.o(i.uart_init) refers to misc.o(i.NVIC_Init) for NVIC_Init
+    usart.o(i.uart_init) refers to stm32f10x_usart.o(i.USART_Init) for USART_Init
+    usart.o(i.uart_init) refers to stm32f10x_usart.o(i.USART_ITConfig) for USART_ITConfig
+    usart.o(i.uart_init) refers to stm32f10x_usart.o(i.USART_Cmd) for USART_Cmd
+    usart.o(.bss) refers (Special) to use_no_semi_2.o(.text) for __use_no_semihosting
+    usart.o(.data) refers (Special) to use_no_semi_2.o(.text) for __use_no_semihosting
+    usart.o(.data) refers (Special) to use_no_semi_2.o(.text) for __use_no_semihosting
+    startup_stm32f10x_hd.o(STACK) refers (Special) to heapauxi.o(.text) for __use_two_region_memory
+    startup_stm32f10x_hd.o(HEAP) refers (Special) to heapauxi.o(.text) for __use_two_region_memory
+    startup_stm32f10x_hd.o(RESET) refers (Special) to heapauxi.o(.text) for __use_two_region_memory
+    startup_stm32f10x_hd.o(RESET) refers to startup_stm32f10x_hd.o(STACK) for __initial_sp
+    startup_stm32f10x_hd.o(RESET) refers to startup_stm32f10x_hd.o(.text) for Reset_Handler
+    startup_stm32f10x_hd.o(RESET) refers to stm32f10x_it.o(i.NMI_Handler) for NMI_Handler
+    startup_stm32f10x_hd.o(RESET) refers to stm32f10x_it.o(i.HardFault_Handler) for HardFault_Handler
+    startup_stm32f10x_hd.o(RESET) refers to stm32f10x_it.o(i.MemManage_Handler) for MemManage_Handler
+    startup_stm32f10x_hd.o(RESET) refers to stm32f10x_it.o(i.BusFault_Handler) for BusFault_Handler
+    startup_stm32f10x_hd.o(RESET) refers to stm32f10x_it.o(i.UsageFault_Handler) for UsageFault_Handler
+    startup_stm32f10x_hd.o(RESET) refers to port.o(.emb_text) for SVC_Handler
+    startup_stm32f10x_hd.o(RESET) refers to stm32f10x_it.o(i.DebugMon_Handler) for DebugMon_Handler
+    startup_stm32f10x_hd.o(RESET) refers to sys.o(i.SysTick_Handler) for SysTick_Handler
+    startup_stm32f10x_hd.o(RESET) refers to usart.o(i.USART1_IRQHandler) for USART1_IRQHandler
+    startup_stm32f10x_hd.o(.text) refers (Special) to heapauxi.o(.text) for __use_two_region_memory
+    startup_stm32f10x_hd.o(.text) refers to system_stm32f10x.o(i.SystemInit) for SystemInit
+    startup_stm32f10x_hd.o(.text) refers to __main.o(!!!main) for __main
+    startup_stm32f10x_hd.o(.text) refers to startup_stm32f10x_hd.o(HEAP) for Heap_Mem
+    startup_stm32f10x_hd.o(.text) refers to startup_stm32f10x_hd.o(STACK) for Stack_Mem
+    stm32f10x_gpio.o(i.GPIO_AFIODeInit) refers to stm32f10x_rcc.o(i.RCC_APB2PeriphResetCmd) for RCC_APB2PeriphResetCmd
+    stm32f10x_gpio.o(i.GPIO_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB2PeriphResetCmd) for RCC_APB2PeriphResetCmd
+    stm32f10x_rcc.o(i.RCC_GetClocksFreq) refers to stm32f10x_rcc.o(.data) for .data
+    stm32f10x_rcc.o(i.RCC_WaitForHSEStartUp) refers to stm32f10x_rcc.o(i.RCC_GetFlagStatus) for RCC_GetFlagStatus
+    stm32f10x_usart.o(i.USART_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB2PeriphResetCmd) for RCC_APB2PeriphResetCmd
+    stm32f10x_usart.o(i.USART_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd
+    stm32f10x_usart.o(i.USART_Init) refers to stm32f10x_rcc.o(i.RCC_GetClocksFreq) for RCC_GetClocksFreq
+    stm32f10x_adc.o(i.ADC_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB2PeriphResetCmd) for RCC_APB2PeriphResetCmd
+    stm32f10x_bkp.o(i.BKP_DeInit) refers to stm32f10x_rcc.o(i.RCC_BackupResetCmd) for RCC_BackupResetCmd
+    stm32f10x_can.o(i.CAN_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd
+    stm32f10x_can.o(i.CAN_GetITStatus) refers to stm32f10x_can.o(i.CheckITStatus) for CheckITStatus
+    stm32f10x_cec.o(i.CEC_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd
+    stm32f10x_dac.o(i.DAC_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd
+    stm32f10x_flash.o(i.FLASH_EnableWriteProtection) refers to stm32f10x_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+    stm32f10x_flash.o(i.FLASH_EraseAllBank1Pages) refers to stm32f10x_flash.o(i.FLASH_WaitForLastBank1Operation) for FLASH_WaitForLastBank1Operation
+    stm32f10x_flash.o(i.FLASH_EraseAllPages) refers to stm32f10x_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+    stm32f10x_flash.o(i.FLASH_EraseOptionBytes) refers to stm32f10x_flash.o(i.FLASH_GetReadOutProtectionStatus) for FLASH_GetReadOutProtectionStatus
+    stm32f10x_flash.o(i.FLASH_EraseOptionBytes) refers to stm32f10x_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+    stm32f10x_flash.o(i.FLASH_ErasePage) refers to stm32f10x_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+    stm32f10x_flash.o(i.FLASH_ProgramHalfWord) refers to stm32f10x_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+    stm32f10x_flash.o(i.FLASH_ProgramOptionByteData) refers to stm32f10x_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+    stm32f10x_flash.o(i.FLASH_ProgramWord) refers to stm32f10x_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+    stm32f10x_flash.o(i.FLASH_ReadOutProtection) refers to stm32f10x_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+    stm32f10x_flash.o(i.FLASH_UserOptionByteConfig) refers to stm32f10x_flash.o(i.FLASH_WaitForLastOperation) for FLASH_WaitForLastOperation
+    stm32f10x_flash.o(i.FLASH_WaitForLastBank1Operation) refers to stm32f10x_flash.o(i.FLASH_GetBank1Status) for FLASH_GetBank1Status
+    stm32f10x_flash.o(i.FLASH_WaitForLastOperation) refers to stm32f10x_flash.o(i.FLASH_GetBank1Status) for FLASH_GetBank1Status
+    stm32f10x_i2c.o(i.I2C_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd
+    stm32f10x_i2c.o(i.I2C_Init) refers to stm32f10x_rcc.o(i.RCC_GetClocksFreq) for RCC_GetClocksFreq
+    stm32f10x_pwr.o(i.PWR_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd
+    stm32f10x_rtc.o(i.RTC_SetAlarm) refers to stm32f10x_rtc.o(i.RTC_EnterConfigMode) for RTC_EnterConfigMode
+    stm32f10x_rtc.o(i.RTC_SetAlarm) refers to stm32f10x_rtc.o(i.RTC_ExitConfigMode) for RTC_ExitConfigMode
+    stm32f10x_rtc.o(i.RTC_SetCounter) refers to stm32f10x_rtc.o(i.RTC_EnterConfigMode) for RTC_EnterConfigMode
+    stm32f10x_rtc.o(i.RTC_SetCounter) refers to stm32f10x_rtc.o(i.RTC_ExitConfigMode) for RTC_ExitConfigMode
+    stm32f10x_rtc.o(i.RTC_SetPrescaler) refers to stm32f10x_rtc.o(i.RTC_EnterConfigMode) for RTC_EnterConfigMode
+    stm32f10x_rtc.o(i.RTC_SetPrescaler) refers to stm32f10x_rtc.o(i.RTC_ExitConfigMode) for RTC_ExitConfigMode
+    stm32f10x_spi.o(i.I2S_Init) refers to stm32f10x_rcc.o(i.RCC_GetClocksFreq) for RCC_GetClocksFreq
+    stm32f10x_spi.o(i.SPI_I2S_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB2PeriphResetCmd) for RCC_APB2PeriphResetCmd
+    stm32f10x_spi.o(i.SPI_I2S_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd
+    stm32f10x_tim.o(i.TIM_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd
+    stm32f10x_tim.o(i.TIM_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB2PeriphResetCmd) for RCC_APB2PeriphResetCmd
+    stm32f10x_tim.o(i.TIM_ETRClockMode1Config) refers to stm32f10x_tim.o(i.TIM_ETRConfig) for TIM_ETRConfig
+    stm32f10x_tim.o(i.TIM_ETRClockMode2Config) refers to stm32f10x_tim.o(i.TIM_ETRConfig) for TIM_ETRConfig
+    stm32f10x_tim.o(i.TIM_ICInit) refers to stm32f10x_tim.o(i.TI1_Config) for TI1_Config
+    stm32f10x_tim.o(i.TIM_ICInit) refers to stm32f10x_tim.o(i.TIM_SetIC1Prescaler) for TIM_SetIC1Prescaler
+    stm32f10x_tim.o(i.TIM_ICInit) refers to stm32f10x_tim.o(i.TI2_Config) for TI2_Config
+    stm32f10x_tim.o(i.TIM_ICInit) refers to stm32f10x_tim.o(i.TIM_SetIC2Prescaler) for TIM_SetIC2Prescaler
+    stm32f10x_tim.o(i.TIM_ICInit) refers to stm32f10x_tim.o(i.TIM_SetIC3Prescaler) for TIM_SetIC3Prescaler
+    stm32f10x_tim.o(i.TIM_ICInit) refers to stm32f10x_tim.o(i.TIM_SetIC4Prescaler) for TIM_SetIC4Prescaler
+    stm32f10x_tim.o(i.TIM_ITRxExternalClockConfig) refers to stm32f10x_tim.o(i.TIM_SelectInputTrigger) for TIM_SelectInputTrigger
+    stm32f10x_tim.o(i.TIM_PWMIConfig) refers to stm32f10x_tim.o(i.TI2_Config) for TI2_Config
+    stm32f10x_tim.o(i.TIM_PWMIConfig) refers to stm32f10x_tim.o(i.TIM_SetIC2Prescaler) for TIM_SetIC2Prescaler
+    stm32f10x_tim.o(i.TIM_PWMIConfig) refers to stm32f10x_tim.o(i.TI1_Config) for TI1_Config
+    stm32f10x_tim.o(i.TIM_PWMIConfig) refers to stm32f10x_tim.o(i.TIM_SetIC1Prescaler) for TIM_SetIC1Prescaler
+    stm32f10x_tim.o(i.TIM_TIxExternalClockConfig) refers to stm32f10x_tim.o(i.TI1_Config) for TI1_Config
+    stm32f10x_tim.o(i.TIM_TIxExternalClockConfig) refers to stm32f10x_tim.o(i.TIM_SelectInputTrigger) for TIM_SelectInputTrigger
+    stm32f10x_tim.o(i.TIM_TIxExternalClockConfig) refers to stm32f10x_tim.o(i.TI2_Config) for TI2_Config
+    stm32f10x_wwdg.o(i.WWDG_DeInit) refers to stm32f10x_rcc.o(i.RCC_APB1PeriphResetCmd) for RCC_APB1PeriphResetCmd
+    event_groups.o(i.vEventGroupClearBitsCallback) refers to event_groups.o(i.xEventGroupClearBits) for xEventGroupClearBits
+    event_groups.o(i.vEventGroupDelete) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    event_groups.o(i.vEventGroupDelete) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    event_groups.o(i.vEventGroupDelete) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    event_groups.o(i.vEventGroupDelete) refers to _printf_dec.o(.text) for _printf_int_dec
+    event_groups.o(i.vEventGroupDelete) refers to _printf_str.o(.text) for _printf_str
+    event_groups.o(i.vEventGroupDelete) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    event_groups.o(i.vEventGroupDelete) refers to noretval__2printf.o(.text) for __2printf
+    event_groups.o(i.vEventGroupDelete) refers to tasks.o(i.xTaskRemoveFromUnorderedEventList) for xTaskRemoveFromUnorderedEventList
+    event_groups.o(i.vEventGroupDelete) refers to heap_4.o(i.vPortFree) for vPortFree
+    event_groups.o(i.vEventGroupDelete) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    event_groups.o(i.vEventGroupSetBitsCallback) refers to event_groups.o(i.xEventGroupSetBits) for xEventGroupSetBits
+    event_groups.o(i.xEventGroupClearBits) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    event_groups.o(i.xEventGroupClearBits) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    event_groups.o(i.xEventGroupClearBits) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    event_groups.o(i.xEventGroupClearBits) refers to _printf_dec.o(.text) for _printf_int_dec
+    event_groups.o(i.xEventGroupClearBits) refers to _printf_str.o(.text) for _printf_str
+    event_groups.o(i.xEventGroupClearBits) refers to noretval__2printf.o(.text) for __2printf
+    event_groups.o(i.xEventGroupClearBits) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    event_groups.o(i.xEventGroupClearBits) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    event_groups.o(i.xEventGroupClearBitsFromISR) refers to timers.o(i.xTimerPendFunctionCallFromISR) for xTimerPendFunctionCallFromISR
+    event_groups.o(i.xEventGroupClearBitsFromISR) refers to event_groups.o(i.vEventGroupClearBitsCallback) for vEventGroupClearBitsCallback
+    event_groups.o(i.xEventGroupCreate) refers to heap_4.o(i.pvPortMalloc) for pvPortMalloc
+    event_groups.o(i.xEventGroupCreate) refers to list.o(i.vListInitialise) for vListInitialise
+    event_groups.o(i.xEventGroupSetBits) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    event_groups.o(i.xEventGroupSetBits) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    event_groups.o(i.xEventGroupSetBits) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    event_groups.o(i.xEventGroupSetBits) refers to _printf_dec.o(.text) for _printf_int_dec
+    event_groups.o(i.xEventGroupSetBits) refers to _printf_str.o(.text) for _printf_str
+    event_groups.o(i.xEventGroupSetBits) refers to noretval__2printf.o(.text) for __2printf
+    event_groups.o(i.xEventGroupSetBits) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    event_groups.o(i.xEventGroupSetBits) refers to tasks.o(i.xTaskRemoveFromUnorderedEventList) for xTaskRemoveFromUnorderedEventList
+    event_groups.o(i.xEventGroupSetBits) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    event_groups.o(i.xEventGroupSetBitsFromISR) refers to timers.o(i.xTimerPendFunctionCallFromISR) for xTimerPendFunctionCallFromISR
+    event_groups.o(i.xEventGroupSetBitsFromISR) refers to event_groups.o(i.vEventGroupSetBitsCallback) for vEventGroupSetBitsCallback
+    event_groups.o(i.xEventGroupSync) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    event_groups.o(i.xEventGroupSync) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    event_groups.o(i.xEventGroupSync) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    event_groups.o(i.xEventGroupSync) refers to _printf_dec.o(.text) for _printf_int_dec
+    event_groups.o(i.xEventGroupSync) refers to _printf_str.o(.text) for _printf_str
+    event_groups.o(i.xEventGroupSync) refers to noretval__2printf.o(.text) for __2printf
+    event_groups.o(i.xEventGroupSync) refers to tasks.o(i.xTaskGetSchedulerState) for xTaskGetSchedulerState
+    event_groups.o(i.xEventGroupSync) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    event_groups.o(i.xEventGroupSync) refers to event_groups.o(i.xEventGroupSetBits) for xEventGroupSetBits
+    event_groups.o(i.xEventGroupSync) refers to tasks.o(i.vTaskPlaceOnUnorderedEventList) for vTaskPlaceOnUnorderedEventList
+    event_groups.o(i.xEventGroupSync) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    event_groups.o(i.xEventGroupSync) refers to tasks.o(i.uxTaskResetEventItemValue) for uxTaskResetEventItemValue
+    event_groups.o(i.xEventGroupSync) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    event_groups.o(i.xEventGroupSync) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    event_groups.o(i.xEventGroupWaitBits) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    event_groups.o(i.xEventGroupWaitBits) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    event_groups.o(i.xEventGroupWaitBits) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    event_groups.o(i.xEventGroupWaitBits) refers to _printf_dec.o(.text) for _printf_int_dec
+    event_groups.o(i.xEventGroupWaitBits) refers to _printf_str.o(.text) for _printf_str
+    event_groups.o(i.xEventGroupWaitBits) refers to noretval__2printf.o(.text) for __2printf
+    event_groups.o(i.xEventGroupWaitBits) refers to tasks.o(i.xTaskGetSchedulerState) for xTaskGetSchedulerState
+    event_groups.o(i.xEventGroupWaitBits) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    event_groups.o(i.xEventGroupWaitBits) refers to event_groups.o(i.prvTestWaitCondition) for prvTestWaitCondition
+    event_groups.o(i.xEventGroupWaitBits) refers to tasks.o(i.vTaskPlaceOnUnorderedEventList) for vTaskPlaceOnUnorderedEventList
+    event_groups.o(i.xEventGroupWaitBits) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    event_groups.o(i.xEventGroupWaitBits) refers to tasks.o(i.uxTaskResetEventItemValue) for uxTaskResetEventItemValue
+    event_groups.o(i.xEventGroupWaitBits) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    event_groups.o(i.xEventGroupWaitBits) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    queue.o(i.pcQueueGetName) refers to queue.o(.bss) for .bss
+    queue.o(i.prvCopyDataFromQueue) refers to rt_memcpy_v6.o(.text) for __aeabi_memcpy
+    queue.o(i.prvCopyDataToQueue) refers to rt_memcpy_v6.o(.text) for __aeabi_memcpy
+    queue.o(i.prvCopyDataToQueue) refers to tasks.o(i.xTaskPriorityDisinherit) for xTaskPriorityDisinherit
+    queue.o(i.prvIsQueueEmpty) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    queue.o(i.prvIsQueueEmpty) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    queue.o(i.prvNotifyQueueSetContainer) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.prvNotifyQueueSetContainer) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.prvNotifyQueueSetContainer) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.prvNotifyQueueSetContainer) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.prvNotifyQueueSetContainer) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.prvNotifyQueueSetContainer) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.prvNotifyQueueSetContainer) refers to queue.o(i.prvCopyDataToQueue) for prvCopyDataToQueue
+    queue.o(i.prvNotifyQueueSetContainer) refers to tasks.o(i.xTaskRemoveFromEventList) for xTaskRemoveFromEventList
+    queue.o(i.prvUnlockQueue) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    queue.o(i.prvUnlockQueue) refers to queue.o(i.prvNotifyQueueSetContainer) for prvNotifyQueueSetContainer
+    queue.o(i.prvUnlockQueue) refers to tasks.o(i.xTaskRemoveFromEventList) for xTaskRemoveFromEventList
+    queue.o(i.prvUnlockQueue) refers to tasks.o(i.vTaskMissedYield) for vTaskMissedYield
+    queue.o(i.prvUnlockQueue) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    queue.o(i.uxQueueMessagesWaiting) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.uxQueueMessagesWaiting) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.uxQueueMessagesWaiting) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.uxQueueMessagesWaiting) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.uxQueueMessagesWaiting) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.uxQueueMessagesWaiting) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.uxQueueMessagesWaiting) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    queue.o(i.uxQueueMessagesWaiting) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    queue.o(i.uxQueueMessagesWaitingFromISR) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.uxQueueMessagesWaitingFromISR) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.uxQueueMessagesWaitingFromISR) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.uxQueueMessagesWaitingFromISR) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.uxQueueMessagesWaitingFromISR) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.uxQueueMessagesWaitingFromISR) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.uxQueueSpacesAvailable) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.uxQueueSpacesAvailable) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.uxQueueSpacesAvailable) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.uxQueueSpacesAvailable) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.uxQueueSpacesAvailable) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.uxQueueSpacesAvailable) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.uxQueueSpacesAvailable) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    queue.o(i.uxQueueSpacesAvailable) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    queue.o(i.vQueueAddToRegistry) refers to queue.o(.bss) for .bss
+    queue.o(i.vQueueDelete) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.vQueueDelete) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.vQueueDelete) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.vQueueDelete) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.vQueueDelete) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.vQueueDelete) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.vQueueDelete) refers to queue.o(i.vQueueUnregisterQueue) for vQueueUnregisterQueue
+    queue.o(i.vQueueDelete) refers to heap_4.o(i.vPortFree) for vPortFree
+    queue.o(i.vQueueUnregisterQueue) refers to queue.o(.bss) for .bss
+    queue.o(i.vQueueWaitForMessageRestricted) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    queue.o(i.vQueueWaitForMessageRestricted) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    queue.o(i.vQueueWaitForMessageRestricted) refers to tasks.o(i.vTaskPlaceOnEventListRestricted) for vTaskPlaceOnEventListRestricted
+    queue.o(i.vQueueWaitForMessageRestricted) refers to queue.o(i.prvUnlockQueue) for prvUnlockQueue
+    queue.o(i.xQueueAddToSet) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    queue.o(i.xQueueAddToSet) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    queue.o(i.xQueueCreateCountingSemaphore) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueCreateCountingSemaphore) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueCreateCountingSemaphore) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueCreateCountingSemaphore) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueCreateCountingSemaphore) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueCreateCountingSemaphore) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueueCreateCountingSemaphore) refers to queue.o(i.xQueueGenericCreate) for xQueueGenericCreate
+    queue.o(i.xQueueCreateMutex) refers to queue.o(i.xQueueGenericCreate) for xQueueGenericCreate
+    queue.o(i.xQueueCreateMutex) refers to queue.o(i.xQueueGenericSend) for xQueueGenericSend
+    queue.o(i.xQueueCreateSet) refers to queue.o(i.xQueueGenericCreate) for xQueueGenericCreate
+    queue.o(i.xQueueGenericCreate) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueGenericCreate) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueGenericCreate) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueGenericCreate) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueGenericCreate) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueGenericCreate) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueueGenericCreate) refers to heap_4.o(i.pvPortMalloc) for pvPortMalloc
+    queue.o(i.xQueueGenericCreate) refers to queue.o(i.xQueueGenericReset) for xQueueGenericReset
+    queue.o(i.xQueueGenericReceive) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueGenericReceive) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueGenericReceive) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueGenericReceive) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueGenericReceive) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueGenericReceive) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueueGenericReceive) refers to tasks.o(i.xTaskGetSchedulerState) for xTaskGetSchedulerState
+    queue.o(i.xQueueGenericReceive) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    queue.o(i.xQueueGenericReceive) refers to queue.o(i.prvCopyDataFromQueue) for prvCopyDataFromQueue
+    queue.o(i.xQueueGenericReceive) refers to tasks.o(i.xTaskRemoveFromEventList) for xTaskRemoveFromEventList
+    queue.o(i.xQueueGenericReceive) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    queue.o(i.xQueueGenericReceive) refers to tasks.o(i.pvTaskIncrementMutexHeldCount) for pvTaskIncrementMutexHeldCount
+    queue.o(i.xQueueGenericReceive) refers to tasks.o(i.vTaskSetTimeOutState) for vTaskSetTimeOutState
+    queue.o(i.xQueueGenericReceive) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    queue.o(i.xQueueGenericReceive) refers to tasks.o(i.xTaskCheckForTimeOut) for xTaskCheckForTimeOut
+    queue.o(i.xQueueGenericReceive) refers to queue.o(i.prvUnlockQueue) for prvUnlockQueue
+    queue.o(i.xQueueGenericReceive) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    queue.o(i.xQueueGenericReceive) refers to queue.o(i.prvIsQueueEmpty) for prvIsQueueEmpty
+    queue.o(i.xQueueGenericReceive) refers to tasks.o(i.vTaskPriorityInherit) for vTaskPriorityInherit
+    queue.o(i.xQueueGenericReceive) refers to tasks.o(i.vTaskPlaceOnEventList) for vTaskPlaceOnEventList
+    queue.o(i.xQueueGenericReset) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueGenericReset) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueGenericReset) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueGenericReset) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueGenericReset) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueGenericReset) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueueGenericReset) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    queue.o(i.xQueueGenericReset) refers to list.o(i.vListInitialise) for vListInitialise
+    queue.o(i.xQueueGenericReset) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    queue.o(i.xQueueGenericReset) refers to tasks.o(i.xTaskRemoveFromEventList) for xTaskRemoveFromEventList
+    queue.o(i.xQueueGenericSend) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueGenericSend) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueGenericSend) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueGenericSend) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueGenericSend) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueGenericSend) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueueGenericSend) refers to tasks.o(i.xTaskGetSchedulerState) for xTaskGetSchedulerState
+    queue.o(i.xQueueGenericSend) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    queue.o(i.xQueueGenericSend) refers to queue.o(i.prvCopyDataToQueue) for prvCopyDataToQueue
+    queue.o(i.xQueueGenericSend) refers to queue.o(i.prvNotifyQueueSetContainer) for prvNotifyQueueSetContainer
+    queue.o(i.xQueueGenericSend) refers to tasks.o(i.xTaskRemoveFromEventList) for xTaskRemoveFromEventList
+    queue.o(i.xQueueGenericSend) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    queue.o(i.xQueueGenericSend) refers to tasks.o(i.vTaskSetTimeOutState) for vTaskSetTimeOutState
+    queue.o(i.xQueueGenericSend) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    queue.o(i.xQueueGenericSend) refers to tasks.o(i.xTaskCheckForTimeOut) for xTaskCheckForTimeOut
+    queue.o(i.xQueueGenericSend) refers to queue.o(i.prvUnlockQueue) for prvUnlockQueue
+    queue.o(i.xQueueGenericSend) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    queue.o(i.xQueueGenericSend) refers to tasks.o(i.vTaskPlaceOnEventList) for vTaskPlaceOnEventList
+    queue.o(i.xQueueGenericSendFromISR) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueGenericSendFromISR) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueGenericSendFromISR) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueGenericSendFromISR) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueGenericSendFromISR) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueGenericSendFromISR) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueueGenericSendFromISR) refers to port.o(i.vPortValidateInterruptPriority) for vPortValidateInterruptPriority
+    queue.o(i.xQueueGenericSendFromISR) refers to queue.o(i.prvCopyDataToQueue) for prvCopyDataToQueue
+    queue.o(i.xQueueGenericSendFromISR) refers to queue.o(i.prvNotifyQueueSetContainer) for prvNotifyQueueSetContainer
+    queue.o(i.xQueueGenericSendFromISR) refers to tasks.o(i.xTaskRemoveFromEventList) for xTaskRemoveFromEventList
+    queue.o(i.xQueueGiveFromISR) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueGiveFromISR) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueGiveFromISR) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueGiveFromISR) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueGiveFromISR) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueGiveFromISR) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueueGiveFromISR) refers to port.o(i.vPortValidateInterruptPriority) for vPortValidateInterruptPriority
+    queue.o(i.xQueueGiveFromISR) refers to queue.o(i.prvNotifyQueueSetContainer) for prvNotifyQueueSetContainer
+    queue.o(i.xQueueGiveFromISR) refers to tasks.o(i.xTaskRemoveFromEventList) for xTaskRemoveFromEventList
+    queue.o(i.xQueueGiveMutexRecursive) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueGiveMutexRecursive) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueGiveMutexRecursive) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueGiveMutexRecursive) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueGiveMutexRecursive) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueGiveMutexRecursive) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueueGiveMutexRecursive) refers to tasks.o(i.xTaskGetCurrentTaskHandle) for xTaskGetCurrentTaskHandle
+    queue.o(i.xQueueGiveMutexRecursive) refers to queue.o(i.xQueueGenericSend) for xQueueGenericSend
+    queue.o(i.xQueueIsQueueEmptyFromISR) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueIsQueueEmptyFromISR) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueIsQueueEmptyFromISR) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueIsQueueEmptyFromISR) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueIsQueueEmptyFromISR) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueIsQueueEmptyFromISR) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueueIsQueueFullFromISR) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueIsQueueFullFromISR) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueIsQueueFullFromISR) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueIsQueueFullFromISR) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueIsQueueFullFromISR) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueIsQueueFullFromISR) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueuePeekFromISR) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueuePeekFromISR) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueuePeekFromISR) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueuePeekFromISR) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueuePeekFromISR) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueuePeekFromISR) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueuePeekFromISR) refers to port.o(i.vPortValidateInterruptPriority) for vPortValidateInterruptPriority
+    queue.o(i.xQueuePeekFromISR) refers to queue.o(i.prvCopyDataFromQueue) for prvCopyDataFromQueue
+    queue.o(i.xQueueReceiveFromISR) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueReceiveFromISR) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueReceiveFromISR) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueReceiveFromISR) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueReceiveFromISR) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueReceiveFromISR) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueueReceiveFromISR) refers to port.o(i.vPortValidateInterruptPriority) for vPortValidateInterruptPriority
+    queue.o(i.xQueueReceiveFromISR) refers to queue.o(i.prvCopyDataFromQueue) for prvCopyDataFromQueue
+    queue.o(i.xQueueReceiveFromISR) refers to tasks.o(i.xTaskRemoveFromEventList) for xTaskRemoveFromEventList
+    queue.o(i.xQueueRemoveFromSet) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    queue.o(i.xQueueRemoveFromSet) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    queue.o(i.xQueueSelectFromSet) refers to queue.o(i.xQueueGenericReceive) for xQueueGenericReceive
+    queue.o(i.xQueueSelectFromSetFromISR) refers to queue.o(i.xQueueReceiveFromISR) for xQueueReceiveFromISR
+    queue.o(i.xQueueTakeMutexRecursive) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    queue.o(i.xQueueTakeMutexRecursive) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    queue.o(i.xQueueTakeMutexRecursive) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    queue.o(i.xQueueTakeMutexRecursive) refers to _printf_dec.o(.text) for _printf_int_dec
+    queue.o(i.xQueueTakeMutexRecursive) refers to _printf_str.o(.text) for _printf_str
+    queue.o(i.xQueueTakeMutexRecursive) refers to noretval__2printf.o(.text) for __2printf
+    queue.o(i.xQueueTakeMutexRecursive) refers to tasks.o(i.xTaskGetCurrentTaskHandle) for xTaskGetCurrentTaskHandle
+    queue.o(i.xQueueTakeMutexRecursive) refers to queue.o(i.xQueueGenericReceive) for xQueueGenericReceive
+    tasks.o(i.eTaskGetState) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.eTaskGetState) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.eTaskGetState) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.eTaskGetState) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.eTaskGetState) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.eTaskGetState) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.eTaskGetState) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.eTaskGetState) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.eTaskGetState) refers to tasks.o(.data) for .data
+    tasks.o(i.eTaskGetState) refers to tasks.o(.bss) for .bss
+    tasks.o(i.pcTaskGetName) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.pcTaskGetName) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.pcTaskGetName) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.pcTaskGetName) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.pcTaskGetName) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.pcTaskGetName) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.pcTaskGetName) refers to tasks.o(.data) for .data
+    tasks.o(i.prvAddCurrentTaskToDelayedList) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.prvAddCurrentTaskToDelayedList) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.prvAddCurrentTaskToDelayedList) refers to list.o(i.vListInsert) for vListInsert
+    tasks.o(i.prvAddCurrentTaskToDelayedList) refers to tasks.o(.data) for .data
+    tasks.o(i.prvAddCurrentTaskToDelayedList) refers to tasks.o(.bss) for .bss
+    tasks.o(i.prvAddNewTaskToReadyList) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.prvAddNewTaskToReadyList) refers to list.o(i.vListInitialise) for vListInitialise
+    tasks.o(i.prvAddNewTaskToReadyList) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.prvAddNewTaskToReadyList) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.prvAddNewTaskToReadyList) refers to tasks.o(.data) for .data
+    tasks.o(i.prvAddNewTaskToReadyList) refers to tasks.o(.bss) for .bss
+    tasks.o(i.prvCheckTasksWaitingTermination) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    tasks.o(i.prvCheckTasksWaitingTermination) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    tasks.o(i.prvCheckTasksWaitingTermination) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.prvCheckTasksWaitingTermination) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.prvCheckTasksWaitingTermination) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.prvCheckTasksWaitingTermination) refers to tasks.o(i.prvDeleteTCB) for prvDeleteTCB
+    tasks.o(i.prvCheckTasksWaitingTermination) refers to tasks.o(.bss) for .bss
+    tasks.o(i.prvCheckTasksWaitingTermination) refers to tasks.o(.data) for .data
+    tasks.o(i.prvDeleteTCB) refers to heap_4.o(i.vPortFree) for vPortFree
+    tasks.o(i.prvIdleTask) refers to tasks.o(i.prvCheckTasksWaitingTermination) for prvCheckTasksWaitingTermination
+    tasks.o(i.prvIdleTask) refers to tasks.o(.bss) for .bss
+    tasks.o(i.prvInitialiseNewTask) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.prvInitialiseNewTask) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.prvInitialiseNewTask) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.prvInitialiseNewTask) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.prvInitialiseNewTask) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.prvInitialiseNewTask) refers to aeabi_memset.o(.text) for __aeabi_memset
+    tasks.o(i.prvInitialiseNewTask) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.prvInitialiseNewTask) refers to list.o(i.vListInitialiseItem) for vListInitialiseItem
+    tasks.o(i.prvInitialiseNewTask) refers to port.o(i.pxPortInitialiseStack) for pxPortInitialiseStack
+    tasks.o(i.prvListTasksWithinSingleList) refers to tasks.o(i.vTaskGetInfo) for vTaskGetInfo
+    tasks.o(i.prvResetNextTaskUnblockTime) refers to tasks.o(.data) for .data
+    tasks.o(i.prvTaskIsTaskSuspended) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.prvTaskIsTaskSuspended) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.prvTaskIsTaskSuspended) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.prvTaskIsTaskSuspended) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.prvTaskIsTaskSuspended) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.prvTaskIsTaskSuspended) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.prvTaskIsTaskSuspended) refers to tasks.o(.bss) for .bss
+    tasks.o(i.pvTaskIncrementMutexHeldCount) refers to tasks.o(.data) for .data
+    tasks.o(i.ulTaskNotifyTake) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.ulTaskNotifyTake) refers to tasks.o(i.prvAddCurrentTaskToDelayedList) for prvAddCurrentTaskToDelayedList
+    tasks.o(i.ulTaskNotifyTake) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.ulTaskNotifyTake) refers to tasks.o(.data) for .data
+    tasks.o(i.uxTaskGetNumberOfTasks) refers to tasks.o(.data) for .data
+    tasks.o(i.uxTaskGetSystemState) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    tasks.o(i.uxTaskGetSystemState) refers to tasks.o(i.prvListTasksWithinSingleList) for prvListTasksWithinSingleList
+    tasks.o(i.uxTaskGetSystemState) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    tasks.o(i.uxTaskGetSystemState) refers to tasks.o(.data) for .data
+    tasks.o(i.uxTaskGetSystemState) refers to tasks.o(.bss) for .bss
+    tasks.o(i.uxTaskPriorityGet) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.uxTaskPriorityGet) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.uxTaskPriorityGet) refers to tasks.o(.data) for .data
+    tasks.o(i.uxTaskPriorityGetFromISR) refers to port.o(i.vPortValidateInterruptPriority) for vPortValidateInterruptPriority
+    tasks.o(i.uxTaskPriorityGetFromISR) refers to tasks.o(.data) for .data
+    tasks.o(i.uxTaskResetEventItemValue) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskDelay) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskDelay) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskDelay) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskDelay) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskDelay) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskDelay) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskDelay) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    tasks.o(i.vTaskDelay) refers to tasks.o(i.prvAddCurrentTaskToDelayedList) for prvAddCurrentTaskToDelayedList
+    tasks.o(i.vTaskDelay) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    tasks.o(i.vTaskDelay) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskDelayUntil) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskDelayUntil) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskDelayUntil) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskDelayUntil) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskDelayUntil) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskDelayUntil) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskDelayUntil) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    tasks.o(i.vTaskDelayUntil) refers to tasks.o(i.prvAddCurrentTaskToDelayedList) for prvAddCurrentTaskToDelayedList
+    tasks.o(i.vTaskDelayUntil) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    tasks.o(i.vTaskDelayUntil) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskDelete) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskDelete) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskDelete) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskDelete) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskDelete) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskDelete) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.vTaskDelete) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.vTaskDelete) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.vTaskDelete) refers to tasks.o(i.prvDeleteTCB) for prvDeleteTCB
+    tasks.o(i.vTaskDelete) refers to tasks.o(i.prvResetNextTaskUnblockTime) for prvResetNextTaskUnblockTime
+    tasks.o(i.vTaskDelete) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.vTaskDelete) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskDelete) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskDelete) refers to tasks.o(.bss) for .bss
+    tasks.o(i.vTaskEndScheduler) refers to port.o(i.vPortEndScheduler) for vPortEndScheduler
+    tasks.o(i.vTaskEndScheduler) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskGetInfo) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    tasks.o(i.vTaskGetInfo) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    tasks.o(i.vTaskGetInfo) refers to tasks.o(i.eTaskGetState) for eTaskGetState
+    tasks.o(i.vTaskGetInfo) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskList) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskList) refers to _printf_u.o(.ARM.Collect$$_printf_percent$$0000000A) for _printf_u
+    tasks.o(i.vTaskList) refers to _printf_c.o(.ARM.Collect$$_printf_percent$$00000013) for _printf_c
+    tasks.o(i.vTaskList) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskList) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskList) refers to heap_4.o(i.pvPortMalloc) for pvPortMalloc
+    tasks.o(i.vTaskList) refers to tasks.o(i.uxTaskGetSystemState) for uxTaskGetSystemState
+    tasks.o(i.vTaskList) refers to strcpy.o(.text) for strcpy
+    tasks.o(i.vTaskList) refers to strlen.o(.text) for strlen
+    tasks.o(i.vTaskList) refers to noretval__2sprintf.o(.text) for __2sprintf
+    tasks.o(i.vTaskList) refers to heap_4.o(i.vPortFree) for vPortFree
+    tasks.o(i.vTaskList) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskMissedYield) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskNotifyGiveFromISR) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskNotifyGiveFromISR) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskNotifyGiveFromISR) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskNotifyGiveFromISR) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskNotifyGiveFromISR) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskNotifyGiveFromISR) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskNotifyGiveFromISR) refers to port.o(i.vPortValidateInterruptPriority) for vPortValidateInterruptPriority
+    tasks.o(i.vTaskNotifyGiveFromISR) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.vTaskNotifyGiveFromISR) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.vTaskNotifyGiveFromISR) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskNotifyGiveFromISR) refers to tasks.o(.bss) for .bss
+    tasks.o(i.vTaskPlaceOnEventList) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskPlaceOnEventList) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskPlaceOnEventList) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskPlaceOnEventList) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskPlaceOnEventList) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskPlaceOnEventList) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskPlaceOnEventList) refers to list.o(i.vListInsert) for vListInsert
+    tasks.o(i.vTaskPlaceOnEventList) refers to tasks.o(i.prvAddCurrentTaskToDelayedList) for prvAddCurrentTaskToDelayedList
+    tasks.o(i.vTaskPlaceOnEventList) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskPlaceOnEventListRestricted) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskPlaceOnEventListRestricted) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskPlaceOnEventListRestricted) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskPlaceOnEventListRestricted) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskPlaceOnEventListRestricted) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskPlaceOnEventListRestricted) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskPlaceOnEventListRestricted) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.vTaskPlaceOnEventListRestricted) refers to tasks.o(i.prvAddCurrentTaskToDelayedList) for prvAddCurrentTaskToDelayedList
+    tasks.o(i.vTaskPlaceOnEventListRestricted) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskPlaceOnUnorderedEventList) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskPlaceOnUnorderedEventList) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskPlaceOnUnorderedEventList) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskPlaceOnUnorderedEventList) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskPlaceOnUnorderedEventList) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskPlaceOnUnorderedEventList) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskPlaceOnUnorderedEventList) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.vTaskPlaceOnUnorderedEventList) refers to tasks.o(i.prvAddCurrentTaskToDelayedList) for prvAddCurrentTaskToDelayedList
+    tasks.o(i.vTaskPlaceOnUnorderedEventList) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskPriorityInherit) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.vTaskPriorityInherit) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.vTaskPriorityInherit) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskPriorityInherit) refers to tasks.o(.bss) for .bss
+    tasks.o(i.vTaskPrioritySet) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskPrioritySet) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskPrioritySet) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskPrioritySet) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskPrioritySet) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskPrioritySet) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskPrioritySet) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.vTaskPrioritySet) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.vTaskPrioritySet) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.vTaskPrioritySet) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.vTaskPrioritySet) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskPrioritySet) refers to tasks.o(.bss) for .bss
+    tasks.o(i.vTaskResume) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskResume) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskResume) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskResume) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskResume) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskResume) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.vTaskResume) refers to tasks.o(i.prvTaskIsTaskSuspended) for prvTaskIsTaskSuspended
+    tasks.o(i.vTaskResume) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.vTaskResume) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.vTaskResume) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.vTaskResume) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskResume) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskResume) refers to tasks.o(.bss) for .bss
+    tasks.o(i.vTaskSetTimeOutState) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskSetTimeOutState) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskSetTimeOutState) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskSetTimeOutState) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskSetTimeOutState) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskSetTimeOutState) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskSetTimeOutState) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskStartScheduler) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskStartScheduler) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskStartScheduler) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskStartScheduler) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskStartScheduler) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskStartScheduler) refers to tasks.o(i.xTaskCreate) for xTaskCreate
+    tasks.o(i.vTaskStartScheduler) refers to timers.o(i.xTimerCreateTimerTask) for xTimerCreateTimerTask
+    tasks.o(i.vTaskStartScheduler) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskStartScheduler) refers to port.o(i.xPortStartScheduler) for xPortStartScheduler
+    tasks.o(i.vTaskStartScheduler) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskStartScheduler) refers to tasks.o(i.prvIdleTask) for prvIdleTask
+    tasks.o(i.vTaskSuspend) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskSuspend) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskSuspend) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskSuspend) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskSuspend) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskSuspend) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.vTaskSuspend) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.vTaskSuspend) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.vTaskSuspend) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.vTaskSuspend) refers to tasks.o(i.prvResetNextTaskUnblockTime) for prvResetNextTaskUnblockTime
+    tasks.o(i.vTaskSuspend) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskSuspend) refers to tasks.o(i.vTaskSwitchContext) for vTaskSwitchContext
+    tasks.o(i.vTaskSuspend) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskSuspend) refers to tasks.o(.bss) for .bss
+    tasks.o(i.vTaskSuspendAll) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskSwitchContext) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.vTaskSwitchContext) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.vTaskSwitchContext) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.vTaskSwitchContext) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.vTaskSwitchContext) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.vTaskSwitchContext) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.vTaskSwitchContext) refers to tasks.o(.data) for .data
+    tasks.o(i.vTaskSwitchContext) refers to tasks.o(.bss) for .bss
+    tasks.o(i.xTaskCheckForTimeOut) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.xTaskCheckForTimeOut) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.xTaskCheckForTimeOut) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.xTaskCheckForTimeOut) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.xTaskCheckForTimeOut) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.xTaskCheckForTimeOut) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.xTaskCheckForTimeOut) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.xTaskCheckForTimeOut) refers to tasks.o(i.vTaskSetTimeOutState) for vTaskSetTimeOutState
+    tasks.o(i.xTaskCheckForTimeOut) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.xTaskCheckForTimeOut) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskCreate) refers to heap_4.o(i.pvPortMalloc) for pvPortMalloc
+    tasks.o(i.xTaskCreate) refers to tasks.o(i.prvInitialiseNewTask) for prvInitialiseNewTask
+    tasks.o(i.xTaskCreate) refers to tasks.o(i.prvAddNewTaskToReadyList) for prvAddNewTaskToReadyList
+    tasks.o(i.xTaskCreate) refers to heap_4.o(i.vPortFree) for vPortFree
+    tasks.o(i.xTaskGenericNotify) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.xTaskGenericNotify) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.xTaskGenericNotify) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.xTaskGenericNotify) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.xTaskGenericNotify) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.xTaskGenericNotify) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.xTaskGenericNotify) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.xTaskGenericNotify) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.xTaskGenericNotify) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.xTaskGenericNotify) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.xTaskGenericNotify) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskGenericNotify) refers to tasks.o(.bss) for .bss
+    tasks.o(i.xTaskGenericNotifyFromISR) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.xTaskGenericNotifyFromISR) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.xTaskGenericNotifyFromISR) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.xTaskGenericNotifyFromISR) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.xTaskGenericNotifyFromISR) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.xTaskGenericNotifyFromISR) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.xTaskGenericNotifyFromISR) refers to port.o(i.vPortValidateInterruptPriority) for vPortValidateInterruptPriority
+    tasks.o(i.xTaskGenericNotifyFromISR) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.xTaskGenericNotifyFromISR) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.xTaskGenericNotifyFromISR) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskGenericNotifyFromISR) refers to tasks.o(.bss) for .bss
+    tasks.o(i.xTaskGetCurrentTaskHandle) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskGetSchedulerState) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskGetTickCount) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskGetTickCountFromISR) refers to port.o(i.vPortValidateInterruptPriority) for vPortValidateInterruptPriority
+    tasks.o(i.xTaskGetTickCountFromISR) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskIncrementTick) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.xTaskIncrementTick) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.xTaskIncrementTick) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.xTaskIncrementTick) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.xTaskIncrementTick) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.xTaskIncrementTick) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.xTaskIncrementTick) refers to tasks.o(i.prvResetNextTaskUnblockTime) for prvResetNextTaskUnblockTime
+    tasks.o(i.xTaskIncrementTick) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.xTaskIncrementTick) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.xTaskIncrementTick) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskIncrementTick) refers to tasks.o(.bss) for .bss
+    tasks.o(i.xTaskNotifyStateClear) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.xTaskNotifyStateClear) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.xTaskNotifyStateClear) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskNotifyWait) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.xTaskNotifyWait) refers to tasks.o(i.prvAddCurrentTaskToDelayedList) for prvAddCurrentTaskToDelayedList
+    tasks.o(i.xTaskNotifyWait) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.xTaskNotifyWait) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskPriorityDisinherit) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.xTaskPriorityDisinherit) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.xTaskPriorityDisinherit) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.xTaskPriorityDisinherit) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.xTaskPriorityDisinherit) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.xTaskPriorityDisinherit) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.xTaskPriorityDisinherit) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.xTaskPriorityDisinherit) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.xTaskPriorityDisinherit) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskPriorityDisinherit) refers to tasks.o(.bss) for .bss
+    tasks.o(i.xTaskRemoveFromEventList) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.xTaskRemoveFromEventList) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.xTaskRemoveFromEventList) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.xTaskRemoveFromEventList) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.xTaskRemoveFromEventList) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.xTaskRemoveFromEventList) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.xTaskRemoveFromEventList) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.xTaskRemoveFromEventList) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.xTaskRemoveFromEventList) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskRemoveFromEventList) refers to tasks.o(.bss) for .bss
+    tasks.o(i.xTaskRemoveFromUnorderedEventList) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.xTaskRemoveFromUnorderedEventList) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.xTaskRemoveFromUnorderedEventList) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.xTaskRemoveFromUnorderedEventList) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.xTaskRemoveFromUnorderedEventList) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.xTaskRemoveFromUnorderedEventList) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.xTaskRemoveFromUnorderedEventList) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.xTaskRemoveFromUnorderedEventList) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.xTaskRemoveFromUnorderedEventList) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskRemoveFromUnorderedEventList) refers to tasks.o(.bss) for .bss
+    tasks.o(i.xTaskResumeAll) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.xTaskResumeAll) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.xTaskResumeAll) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.xTaskResumeAll) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.xTaskResumeAll) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.xTaskResumeAll) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.xTaskResumeAll) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    tasks.o(i.xTaskResumeAll) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.xTaskResumeAll) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.xTaskResumeAll) refers to tasks.o(i.prvResetNextTaskUnblockTime) for prvResetNextTaskUnblockTime
+    tasks.o(i.xTaskResumeAll) refers to tasks.o(i.xTaskIncrementTick) for xTaskIncrementTick
+    tasks.o(i.xTaskResumeAll) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    tasks.o(i.xTaskResumeAll) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskResumeAll) refers to tasks.o(.bss) for .bss
+    tasks.o(i.xTaskResumeFromISR) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    tasks.o(i.xTaskResumeFromISR) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    tasks.o(i.xTaskResumeFromISR) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    tasks.o(i.xTaskResumeFromISR) refers to _printf_dec.o(.text) for _printf_int_dec
+    tasks.o(i.xTaskResumeFromISR) refers to _printf_str.o(.text) for _printf_str
+    tasks.o(i.xTaskResumeFromISR) refers to noretval__2printf.o(.text) for __2printf
+    tasks.o(i.xTaskResumeFromISR) refers to port.o(i.vPortValidateInterruptPriority) for vPortValidateInterruptPriority
+    tasks.o(i.xTaskResumeFromISR) refers to tasks.o(i.prvTaskIsTaskSuspended) for prvTaskIsTaskSuspended
+    tasks.o(i.xTaskResumeFromISR) refers to list.o(i.uxListRemove) for uxListRemove
+    tasks.o(i.xTaskResumeFromISR) refers to list.o(i.vListInsertEnd) for vListInsertEnd
+    tasks.o(i.xTaskResumeFromISR) refers to tasks.o(.data) for .data
+    tasks.o(i.xTaskResumeFromISR) refers to tasks.o(.bss) for .bss
+    timers.o(i.pcTimerGetName) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.pcTimerGetName) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.pcTimerGetName) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.pcTimerGetName) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.pcTimerGetName) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.pcTimerGetName) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.prvCheckForValidListAndQueue) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    timers.o(i.prvCheckForValidListAndQueue) refers to list.o(i.vListInitialise) for vListInitialise
+    timers.o(i.prvCheckForValidListAndQueue) refers to queue.o(i.xQueueGenericCreate) for xQueueGenericCreate
+    timers.o(i.prvCheckForValidListAndQueue) refers to queue.o(i.vQueueAddToRegistry) for vQueueAddToRegistry
+    timers.o(i.prvCheckForValidListAndQueue) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    timers.o(i.prvCheckForValidListAndQueue) refers to timers.o(.data) for .data
+    timers.o(i.prvCheckForValidListAndQueue) refers to timers.o(.bss) for .bss
+    timers.o(i.prvInsertTimerInActiveList) refers to list.o(i.vListInsert) for vListInsert
+    timers.o(i.prvInsertTimerInActiveList) refers to timers.o(.data) for .data
+    timers.o(i.prvProcessExpiredTimer) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.prvProcessExpiredTimer) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.prvProcessExpiredTimer) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.prvProcessExpiredTimer) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.prvProcessExpiredTimer) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.prvProcessExpiredTimer) refers to list.o(i.uxListRemove) for uxListRemove
+    timers.o(i.prvProcessExpiredTimer) refers to timers.o(i.prvInsertTimerInActiveList) for prvInsertTimerInActiveList
+    timers.o(i.prvProcessExpiredTimer) refers to timers.o(i.xTimerGenericCommand) for xTimerGenericCommand
+    timers.o(i.prvProcessExpiredTimer) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.prvProcessExpiredTimer) refers to timers.o(.data) for .data
+    timers.o(i.prvProcessExpiredTimer) refers to timers.o(i.xTimerCreate) for i.xTimerCreate
+    timers.o(i.prvProcessReceivedCommands) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.prvProcessReceivedCommands) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.prvProcessReceivedCommands) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.prvProcessReceivedCommands) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.prvProcessReceivedCommands) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.prvProcessReceivedCommands) refers to list.o(i.uxListRemove) for uxListRemove
+    timers.o(i.prvProcessReceivedCommands) refers to timers.o(i.prvSampleTimeNow) for prvSampleTimeNow
+    timers.o(i.prvProcessReceivedCommands) refers to timers.o(i.prvInsertTimerInActiveList) for prvInsertTimerInActiveList
+    timers.o(i.prvProcessReceivedCommands) refers to timers.o(i.xTimerGenericCommand) for xTimerGenericCommand
+    timers.o(i.prvProcessReceivedCommands) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.prvProcessReceivedCommands) refers to heap_4.o(i.vPortFree) for vPortFree
+    timers.o(i.prvProcessReceivedCommands) refers to queue.o(i.xQueueGenericReceive) for xQueueGenericReceive
+    timers.o(i.prvProcessReceivedCommands) refers to timers.o(.data) for .data
+    timers.o(i.prvProcessTimerOrBlockTask) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    timers.o(i.prvProcessTimerOrBlockTask) refers to timers.o(i.prvSampleTimeNow) for prvSampleTimeNow
+    timers.o(i.prvProcessTimerOrBlockTask) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    timers.o(i.prvProcessTimerOrBlockTask) refers to queue.o(i.vQueueWaitForMessageRestricted) for vQueueWaitForMessageRestricted
+    timers.o(i.prvProcessTimerOrBlockTask) refers to timers.o(i.prvProcessExpiredTimer) for prvProcessExpiredTimer
+    timers.o(i.prvProcessTimerOrBlockTask) refers to timers.o(.data) for .data
+    timers.o(i.prvSampleTimeNow) refers to tasks.o(i.xTaskGetTickCount) for xTaskGetTickCount
+    timers.o(i.prvSampleTimeNow) refers to timers.o(i.prvSwitchTimerLists) for prvSwitchTimerLists
+    timers.o(i.prvSampleTimeNow) refers to timers.o(.data) for .data
+    timers.o(i.prvSwitchTimerLists) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.prvSwitchTimerLists) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.prvSwitchTimerLists) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.prvSwitchTimerLists) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.prvSwitchTimerLists) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.prvSwitchTimerLists) refers to list.o(i.uxListRemove) for uxListRemove
+    timers.o(i.prvSwitchTimerLists) refers to list.o(i.vListInsert) for vListInsert
+    timers.o(i.prvSwitchTimerLists) refers to timers.o(i.xTimerGenericCommand) for xTimerGenericCommand
+    timers.o(i.prvSwitchTimerLists) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.prvSwitchTimerLists) refers to timers.o(.data) for .data
+    timers.o(i.prvSwitchTimerLists) refers to timers.o(i.xTimerCreate) for i.xTimerCreate
+    timers.o(i.prvTimerTask) refers to timers.o(i.prvProcessTimerOrBlockTask) for prvProcessTimerOrBlockTask
+    timers.o(i.prvTimerTask) refers to timers.o(i.prvProcessReceivedCommands) for prvProcessReceivedCommands
+    timers.o(i.prvTimerTask) refers to timers.o(.data) for .data
+    timers.o(i.pvTimerGetTimerID) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.pvTimerGetTimerID) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.pvTimerGetTimerID) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.pvTimerGetTimerID) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.pvTimerGetTimerID) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.pvTimerGetTimerID) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.pvTimerGetTimerID) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    timers.o(i.pvTimerGetTimerID) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    timers.o(i.vTimerSetTimerID) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.vTimerSetTimerID) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.vTimerSetTimerID) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.vTimerSetTimerID) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.vTimerSetTimerID) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.vTimerSetTimerID) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.vTimerSetTimerID) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    timers.o(i.vTimerSetTimerID) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    timers.o(i.xTimerCreate) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.xTimerCreate) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.xTimerCreate) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.xTimerCreate) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.xTimerCreate) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.xTimerCreate) refers to heap_4.o(i.pvPortMalloc) for pvPortMalloc
+    timers.o(i.xTimerCreate) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.xTimerCreate) refers to timers.o(i.prvCheckForValidListAndQueue) for prvCheckForValidListAndQueue
+    timers.o(i.xTimerCreate) refers to list.o(i.vListInitialiseItem) for vListInitialiseItem
+    timers.o(i.xTimerCreateTimerTask) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.xTimerCreateTimerTask) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.xTimerCreateTimerTask) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.xTimerCreateTimerTask) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.xTimerCreateTimerTask) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.xTimerCreateTimerTask) refers to timers.o(i.prvCheckForValidListAndQueue) for prvCheckForValidListAndQueue
+    timers.o(i.xTimerCreateTimerTask) refers to tasks.o(i.xTaskCreate) for xTaskCreate
+    timers.o(i.xTimerCreateTimerTask) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.xTimerCreateTimerTask) refers to timers.o(.data) for .data
+    timers.o(i.xTimerCreateTimerTask) refers to timers.o(i.prvTimerTask) for prvTimerTask
+    timers.o(i.xTimerGenericCommand) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.xTimerGenericCommand) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.xTimerGenericCommand) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.xTimerGenericCommand) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.xTimerGenericCommand) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.xTimerGenericCommand) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.xTimerGenericCommand) refers to tasks.o(i.xTaskGetSchedulerState) for xTaskGetSchedulerState
+    timers.o(i.xTimerGenericCommand) refers to queue.o(i.xQueueGenericSend) for xQueueGenericSend
+    timers.o(i.xTimerGenericCommand) refers to queue.o(i.xQueueGenericSendFromISR) for xQueueGenericSendFromISR
+    timers.o(i.xTimerGenericCommand) refers to timers.o(.data) for .data
+    timers.o(i.xTimerGetExpiryTime) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.xTimerGetExpiryTime) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.xTimerGetExpiryTime) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.xTimerGetExpiryTime) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.xTimerGetExpiryTime) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.xTimerGetExpiryTime) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.xTimerGetPeriod) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.xTimerGetPeriod) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.xTimerGetPeriod) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.xTimerGetPeriod) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.xTimerGetPeriod) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.xTimerGetPeriod) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.xTimerGetTimerDaemonTaskHandle) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.xTimerGetTimerDaemonTaskHandle) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.xTimerGetTimerDaemonTaskHandle) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.xTimerGetTimerDaemonTaskHandle) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.xTimerGetTimerDaemonTaskHandle) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.xTimerGetTimerDaemonTaskHandle) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.xTimerGetTimerDaemonTaskHandle) refers to timers.o(.data) for .data
+    timers.o(i.xTimerIsTimerActive) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.xTimerIsTimerActive) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.xTimerIsTimerActive) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.xTimerIsTimerActive) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.xTimerIsTimerActive) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.xTimerIsTimerActive) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.xTimerIsTimerActive) refers to port.o(i.vPortEnterCritical) for vPortEnterCritical
+    timers.o(i.xTimerIsTimerActive) refers to port.o(i.vPortExitCritical) for vPortExitCritical
+    timers.o(i.xTimerPendFunctionCall) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    timers.o(i.xTimerPendFunctionCall) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    timers.o(i.xTimerPendFunctionCall) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    timers.o(i.xTimerPendFunctionCall) refers to _printf_dec.o(.text) for _printf_int_dec
+    timers.o(i.xTimerPendFunctionCall) refers to _printf_str.o(.text) for _printf_str
+    timers.o(i.xTimerPendFunctionCall) refers to noretval__2printf.o(.text) for __2printf
+    timers.o(i.xTimerPendFunctionCall) refers to queue.o(i.xQueueGenericSend) for xQueueGenericSend
+    timers.o(i.xTimerPendFunctionCall) refers to timers.o(.data) for .data
+    timers.o(i.xTimerPendFunctionCallFromISR) refers to queue.o(i.xQueueGenericSendFromISR) for xQueueGenericSendFromISR
+    timers.o(i.xTimerPendFunctionCallFromISR) refers to timers.o(.data) for .data
+    heap_4.o(i.prvHeapInit) refers to heap_4.o(.bss) for .bss
+    heap_4.o(i.prvHeapInit) refers to heap_4.o(.data) for .data
+    heap_4.o(i.prvInsertBlockIntoFreeList) refers to heap_4.o(.data) for .data
+    heap_4.o(i.pvPortMalloc) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    heap_4.o(i.pvPortMalloc) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    heap_4.o(i.pvPortMalloc) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    heap_4.o(i.pvPortMalloc) refers to _printf_dec.o(.text) for _printf_int_dec
+    heap_4.o(i.pvPortMalloc) refers to _printf_str.o(.text) for _printf_str
+    heap_4.o(i.pvPortMalloc) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    heap_4.o(i.pvPortMalloc) refers to heap_4.o(i.prvHeapInit) for prvHeapInit
+    heap_4.o(i.pvPortMalloc) refers to noretval__2printf.o(.text) for __2printf
+    heap_4.o(i.pvPortMalloc) refers to heap_4.o(i.prvInsertBlockIntoFreeList) for prvInsertBlockIntoFreeList
+    heap_4.o(i.pvPortMalloc) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    heap_4.o(i.pvPortMalloc) refers to heap_4.o(.data) for .data
+    heap_4.o(i.vPortFree) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    heap_4.o(i.vPortFree) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    heap_4.o(i.vPortFree) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    heap_4.o(i.vPortFree) refers to _printf_dec.o(.text) for _printf_int_dec
+    heap_4.o(i.vPortFree) refers to _printf_str.o(.text) for _printf_str
+    heap_4.o(i.vPortFree) refers to noretval__2printf.o(.text) for __2printf
+    heap_4.o(i.vPortFree) refers to tasks.o(i.vTaskSuspendAll) for vTaskSuspendAll
+    heap_4.o(i.vPortFree) refers to heap_4.o(i.prvInsertBlockIntoFreeList) for prvInsertBlockIntoFreeList
+    heap_4.o(i.vPortFree) refers to tasks.o(i.xTaskResumeAll) for xTaskResumeAll
+    heap_4.o(i.vPortFree) refers to heap_4.o(.data) for .data
+    heap_4.o(i.xPortGetFreeHeapSize) refers to heap_4.o(.data) for .data
+    heap_4.o(i.xPortGetMinimumEverFreeHeapSize) refers to heap_4.o(.data) for .data
+    port.o(.emb_text) refers to tasks.o(i.vTaskSwitchContext) for vTaskSwitchContext
+    port.o(.emb_text) refers to tasks.o(.data) for pxCurrentTCB
+    port.o(i.prvTaskExitError) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    port.o(i.prvTaskExitError) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    port.o(i.prvTaskExitError) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    port.o(i.prvTaskExitError) refers to _printf_dec.o(.text) for _printf_int_dec
+    port.o(i.prvTaskExitError) refers to _printf_str.o(.text) for _printf_str
+    port.o(i.prvTaskExitError) refers to noretval__2printf.o(.text) for __2printf
+    port.o(i.prvTaskExitError) refers to port.o(.data) for .data
+    port.o(i.pxPortInitialiseStack) refers to port.o(i.prvTaskExitError) for prvTaskExitError
+    port.o(i.vPortEndScheduler) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    port.o(i.vPortEndScheduler) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    port.o(i.vPortEndScheduler) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    port.o(i.vPortEndScheduler) refers to _printf_dec.o(.text) for _printf_int_dec
+    port.o(i.vPortEndScheduler) refers to _printf_str.o(.text) for _printf_str
+    port.o(i.vPortEndScheduler) refers to noretval__2printf.o(.text) for __2printf
+    port.o(i.vPortEndScheduler) refers to port.o(.data) for .data
+    port.o(i.vPortEnterCritical) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    port.o(i.vPortEnterCritical) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    port.o(i.vPortEnterCritical) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    port.o(i.vPortEnterCritical) refers to _printf_dec.o(.text) for _printf_int_dec
+    port.o(i.vPortEnterCritical) refers to _printf_str.o(.text) for _printf_str
+    port.o(i.vPortEnterCritical) refers to noretval__2printf.o(.text) for __2printf
+    port.o(i.vPortEnterCritical) refers to port.o(.data) for .data
+    port.o(i.vPortExitCritical) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    port.o(i.vPortExitCritical) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    port.o(i.vPortExitCritical) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    port.o(i.vPortExitCritical) refers to _printf_dec.o(.text) for _printf_int_dec
+    port.o(i.vPortExitCritical) refers to _printf_str.o(.text) for _printf_str
+    port.o(i.vPortExitCritical) refers to noretval__2printf.o(.text) for __2printf
+    port.o(i.vPortExitCritical) refers to port.o(.data) for .data
+    port.o(i.vPortSetupTimerInterrupt) refers to system_stm32f10x.o(.data) for SystemCoreClock
+    port.o(i.vPortValidateInterruptPriority) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    port.o(i.vPortValidateInterruptPriority) refers to _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) for _printf_d
+    port.o(i.vPortValidateInterruptPriority) refers to _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) for _printf_s
+    port.o(i.vPortValidateInterruptPriority) refers to _printf_dec.o(.text) for _printf_int_dec
+    port.o(i.vPortValidateInterruptPriority) refers to _printf_str.o(.text) for _printf_str
+    port.o(i.vPortValidateInterruptPriority) refers to port.o(.emb_text) for vPortGetIPSR
+    port.o(i.vPortValidateInterruptPriority) refers to noretval__2printf.o(.text) for __2printf
+    port.o(i.vPortValidateInterruptPriority) refers to port.o(.data) for .data
+    port.o(i.xPortStartScheduler) refers to port.o(i.vPortSetupTimerInterrupt) for vPortSetupTimerInterrupt
+    port.o(i.xPortStartScheduler) refers to port.o(.emb_text) for __asm___6_port_c_39a90d8d__prvStartFirstTask
+    port.o(i.xPortStartScheduler) refers to port.o(.data) for .data
+    port.o(i.xPortSysTickHandler) refers to tasks.o(i.xTaskIncrementTick) for xTaskIncrementTick
+    use_no_semi_2.o(.text) refers (Special) to use_no_semi.o(.text) for __use_no_semihosting_swi
+    __2printf.o(.text) refers to _printf_char_file.o(.text) for _printf_char_file
+    __2printf.o(.text) refers to usart.o(.data) for __stdout
+    __2sprintf.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common
+    __2sprintf.o(.text) refers to _sputc.o(.text) for _sputc
+    noretval__2printf.o(.text) refers to _printf_char_file.o(.text) for _printf_char_file
+    noretval__2printf.o(.text) refers to usart.o(.data) for __stdout
+    noretval__2sprintf.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common
+    noretval__2sprintf.o(.text) refers to _sputc.o(.text) for _sputc
+    __printf.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    _printf_str.o(.text) refers (Special) to _printf_char.o(.text) for _printf_cs_common
+    _printf_dec.o(.text) refers to _printf_intcommon.o(.text) for _printf_int_common
+    __printf_flags.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    __printf_flags.o(.text) refers to __printf_flags.o(.constdata) for .constdata
+    __printf_ss.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    __printf_flags_ss.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    __printf_flags_ss.o(.text) refers to __printf_flags_ss.o(.constdata) for .constdata
+    __printf_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit
+    __printf_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    __printf_flags_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit
+    __printf_flags_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    __printf_flags_wp.o(.text) refers to __printf_flags_wp.o(.constdata) for .constdata
+    __printf_ss_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit
+    __printf_ss_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    __printf_flags_ss_wp.o(.text) refers to __printf_wp.o(i._is_digit) for _is_digit
+    __printf_flags_ss_wp.o(.text) refers to _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) for _printf_percent
+    __printf_flags_ss_wp.o(.text) refers to __printf_flags_ss_wp.o(.constdata) for .constdata
+    _printf_c.o(.ARM.Collect$$_printf_percent$$00000013) refers (Weak) to _printf_char.o(.text) for _printf_char
+    _printf_s.o(.ARM.Collect$$_printf_percent$$00000014) refers (Weak) to _printf_char.o(.text) for _printf_string
+    _printf_d.o(.ARM.Collect$$_printf_percent$$00000009) refers (Weak) to _printf_dec.o(.text) for _printf_int_dec
+    _printf_u.o(.ARM.Collect$$_printf_percent$$0000000A) refers (Weak) to _printf_dec.o(.text) for _printf_int_dec
+    _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000) refers (Special) to _printf_percent_end.o(.ARM.Collect$$_printf_percent$$00000017) for _printf_percent_end
+    rt_memcpy_v6.o(.text) refers to rt_memcpy_w.o(.text) for __aeabi_memcpy4
+    aeabi_memset.o(.text) refers to rt_memclr.o(.text) for _memset
+    __main.o(!!!main) refers to __rtentry.o(.ARM.Collect$$rtentry$$00000000) for __rt_entry
+    __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$0000000A) for __rt_entry_li
+    __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) for __rt_entry_main
+    __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$0000000C) for __rt_entry_postli_1
+    __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$00000009) for __rt_entry_postsh_1
+    __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry2.o(.ARM.Collect$$rtentry$$00000002) for __rt_entry_presh_1
+    __rtentry.o(.ARM.Collect$$rtentry$$00000000) refers (Special) to __rtentry4.o(.ARM.Collect$$rtentry$$00000004) for __rt_entry_sh
+    _printf_char_common.o(.text) refers to __printf.o(.text) for __printf
+    _printf_char.o(.text) refers (Weak) to _printf_str.o(.text) for _printf_str
+    _printf_char_file.o(.text) refers to _printf_char_common.o(.text) for _printf_char_common
+    _printf_char_file.o(.text) refers to ferror.o(.text) for ferror
+    _printf_char_file.o(.text) refers to usart.o(i.fputc) for fputc
+    rt_memclr.o(.text) refers to rt_memclr_w.o(.text) for _memset_w
+    __rtentry2.o(.ARM.Collect$$rtentry$$00000008) refers to boardinit2.o(.text) for _platform_post_stackheap_init
+    __rtentry2.o(.ARM.Collect$$rtentry$$0000000A) refers to libinit.o(.ARM.Collect$$libinit$$00000000) for __rt_lib_init
+    __rtentry2.o(.ARM.Collect$$rtentry$$0000000B) refers to boardinit3.o(.text) for _platform_post_lib_init
+    __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) refers to main.o(i.main) for main
+    __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) refers to exit.o(.text) for exit
+    __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$00000001) for .ARM.Collect$$rtentry$$00000001
+    __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$00000008) for .ARM.Collect$$rtentry$$00000008
+    __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$0000000A) for .ARM.Collect$$rtentry$$0000000A
+    __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$0000000B) for .ARM.Collect$$rtentry$$0000000B
+    __rtentry2.o(.ARM.exidx) refers to __rtentry2.o(.ARM.Collect$$rtentry$$0000000D) for .ARM.Collect$$rtentry$$0000000D
+    __rtentry4.o(.ARM.Collect$$rtentry$$00000004) refers to sys_stackheap_outer.o(.text) for __user_setup_stackheap
+    __rtentry4.o(.ARM.exidx) refers to __rtentry4.o(.ARM.Collect$$rtentry$$00000004) for .ARM.Collect$$rtentry$$00000004
+    sys_stackheap_outer.o(.text) refers to libspace.o(.text) for __user_perproc_libspace
+    sys_stackheap_outer.o(.text) refers to startup_stm32f10x_hd.o(.text) for __user_initial_stackheap
+    exit.o(.text) refers to rtexit.o(.ARM.Collect$$rtexit$$00000000) for __rt_exit
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000002E) for __rt_lib_init_alloca_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000002C) for __rt_lib_init_argv_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000001B) for __rt_lib_init_atexit_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000021) for __rt_lib_init_clock_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000032) for __rt_lib_init_cpp_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000030) for __rt_lib_init_exceptions_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000002) for __rt_lib_init_fp_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000001F) for __rt_lib_init_fp_trap_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000023) for __rt_lib_init_getenv_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000000A) for __rt_lib_init_heap_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000011) for __rt_lib_init_lc_collate_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000013) for __rt_lib_init_lc_ctype_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000015) for __rt_lib_init_lc_monetary_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000017) for __rt_lib_init_lc_numeric_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000019) for __rt_lib_init_lc_time_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000004) for __rt_lib_init_preinit_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000000E) for __rt_lib_init_rand_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000033) for __rt_lib_init_return
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000001D) for __rt_lib_init_signal_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$00000025) for __rt_lib_init_stdio_1
+    libinit.o(.ARM.Collect$$libinit$$00000000) refers (Special) to libinit2.o(.ARM.Collect$$libinit$$0000000C) for __rt_lib_init_user_alloc_1
+    libspace.o(.text) refers to libspace.o(.bss) for __libspace_start
+    rtexit.o(.ARM.Collect$$rtexit$$00000000) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000004) for __rt_exit_exit
+    rtexit.o(.ARM.Collect$$rtexit$$00000000) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000003) for __rt_exit_ls
+    rtexit.o(.ARM.Collect$$rtexit$$00000000) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000002) for __rt_exit_prels_1
+    rtexit.o(.ARM.exidx) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000004) for __rt_exit_exit
+    rtexit.o(.ARM.exidx) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000003) for __rt_exit_ls
+    rtexit.o(.ARM.exidx) refers (Special) to rtexit2.o(.ARM.Collect$$rtexit$$00000002) for __rt_exit_prels_1
+    rtexit.o(.ARM.exidx) refers to rtexit.o(.ARM.Collect$$rtexit$$00000000) for .ARM.Collect$$rtexit$$00000000
+    libinit2.o(.ARM.Collect$$libinit$$00000010) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F
+    libinit2.o(.ARM.Collect$$libinit$$00000012) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F
+    libinit2.o(.ARM.Collect$$libinit$$00000014) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F
+    libinit2.o(.ARM.Collect$$libinit$$00000016) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F
+    libinit2.o(.ARM.Collect$$libinit$$00000018) refers to libinit2.o(.ARM.Collect$$libinit$$0000000F) for .ARM.Collect$$libinit$$0000000F
+    libinit2.o(.ARM.Collect$$libinit$$00000026) refers to argv_veneer.o(.emb_text) for __ARM_argv_veneer
+    libinit2.o(.ARM.Collect$$libinit$$00000027) refers to argv_veneer.o(.emb_text) for __ARM_argv_veneer
+    rtexit2.o(.ARM.Collect$$rtexit$$00000003) refers to libshutdown.o(.ARM.Collect$$libshutdown$$00000000) for __rt_lib_shutdown
+    rtexit2.o(.ARM.Collect$$rtexit$$00000004) refers to usart.o(i._sys_exit) for _sys_exit
+    rtexit2.o(.ARM.exidx) refers to rtexit2.o(.ARM.Collect$$rtexit$$00000001) for .ARM.Collect$$rtexit$$00000001
+    rtexit2.o(.ARM.exidx) refers to rtexit2.o(.ARM.Collect$$rtexit$$00000003) for .ARM.Collect$$rtexit$$00000003
+    rtexit2.o(.ARM.exidx) refers to rtexit2.o(.ARM.Collect$$rtexit$$00000004) for .ARM.Collect$$rtexit$$00000004
+    argv_veneer.o(.emb_text) refers to no_argv.o(.text) for __ARM_get_argv
+    _get_argv_nomalloc.o(.text) refers (Special) to hrguard.o(.text) for __heap_region$guard
+    _get_argv_nomalloc.o(.text) refers to defsig_rtmem_outer.o(.text) for __rt_SIGRTMEM
+    _get_argv_nomalloc.o(.text) refers to sys_command.o(.text) for _sys_command_string
+    libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000004) for __rt_lib_shutdown_cpp_1
+    libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000002) for __rt_lib_shutdown_fini_1
+    libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000009) for __rt_lib_shutdown_fp_trap_1
+    libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000011) for __rt_lib_shutdown_heap_1
+    libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000012) for __rt_lib_shutdown_return
+    libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$0000000C) for __rt_lib_shutdown_signal_1
+    libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$00000006) for __rt_lib_shutdown_stdio_1
+    libshutdown.o(.ARM.Collect$$libshutdown$$00000000) refers (Special) to libshutdown2.o(.ARM.Collect$$libshutdown$$0000000E) for __rt_lib_shutdown_user_alloc_1
+    sys_command.o(.text) refers (Special) to use_no_semi.o(.text) for __I$use$semihosting
+    sys_command.o(.text) refers (Special) to indicate_semi.o(.text) for __semihosting_library_function
+    defsig_rtmem_outer.o(.text) refers to defsig_rtmem_inner.o(.text) for __rt_SIGRTMEM_inner
+    defsig_rtmem_outer.o(.text) refers to defsig_exit.o(.text) for __sig_exit
+    defsig_rtmem_formal.o(.text) refers to rt_raise.o(.text) for __rt_raise
+    rt_raise.o(.text) refers to __raise.o(.text) for __raise
+    rt_raise.o(.text) refers to usart.o(i._sys_exit) for _sys_exit
+    defsig_exit.o(.text) refers to usart.o(i._sys_exit) for _sys_exit
+    defsig_rtmem_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+    __raise.o(.text) refers to defsig.o(CL$$defsig) for __default_signal_handler
+    defsig_general.o(.text) refers to sys_wrch.o(.text) for _ttywrch
+    sys_wrch.o(.text) refers (Special) to use_no_semi.o(.text) for __I$use$semihosting
+    sys_wrch.o(.text) refers (Special) to indicate_semi.o(.text) for __semihosting_library_function
+    defsig.o(CL$$defsig) refers to defsig_rtmem_inner.o(.text) for __rt_SIGRTMEM_inner
+    defsig_abrt_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+    defsig_fpe_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+    defsig_rtred_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+    defsig_stak_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+    defsig_pvfn_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+    defsig_cppl_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+    defsig_segv_inner.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+    defsig_other.o(.text) refers to defsig_general.o(.text) for __default_signal_display
+
+
+==============================================================================
+
+Removing Unused input sections from the image.
+
+    Removing system_stm32f10x.o(i.SystemCoreClockUpdate), (104 bytes).
+    Removing sys.o(i.SysTick_Config), (48 bytes).
+    Removing sys.o(i.delay_ms), (44 bytes).
+    Removing sys.o(i.delay_us), (40 bytes).
+    Removing core_cm3.o(.emb_text), (32 bytes).
+    Removing misc.o(i.NVIC_SetVectorTable), (20 bytes).
+    Removing misc.o(i.NVIC_SystemLPConfig), (24 bytes).
+    Removing misc.o(i.SysTick_CLKSourceConfig), (24 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_AFIODeInit), (22 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_DeInit), (180 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_ETH_MediaInterfaceConfig), (12 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_EXTILineConfig), (40 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_EventOutputCmd), (12 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_EventOutputConfig), (28 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_PinLockConfig), (16 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_PinRemapConfig), (88 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_ReadInputData), (6 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_ReadInputDataBit), (14 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_ReadOutputData), (6 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_ReadOutputDataBit), (14 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_ResetBits), (4 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_StructInit), (16 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_Write), (4 bytes).
+    Removing stm32f10x_gpio.o(i.GPIO_WriteBit), (10 bytes).
+    Removing stm32f10x_dbgmcu.o(i.DBGMCU_Config), (24 bytes).
+    Removing stm32f10x_dbgmcu.o(i.DBGMCU_GetDEVID), (16 bytes).
+    Removing stm32f10x_dbgmcu.o(i.DBGMCU_GetREVID), (12 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_ADCCLKConfig), (20 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_AHBPeriphClockCmd), (24 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_APB1PeriphClockCmd), (24 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_APB1PeriphResetCmd), (24 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_APB2PeriphResetCmd), (24 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_AdjustHSICalibrationValue), (20 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_BackupResetCmd), (12 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_ClearFlag), (16 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_ClearITPendingBit), (12 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_ClockSecuritySystemCmd), (12 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_DeInit), (64 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_GetFlagStatus), (48 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_GetITStatus), (20 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_GetSYSCLKSource), (16 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_HCLKConfig), (20 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_HSEConfig), (52 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_HSICmd), (12 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_ITConfig), (24 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_LSEConfig), (32 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_LSICmd), (12 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_MCOConfig), (12 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_PCLK1Config), (20 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_PCLK2Config), (20 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_PLLCmd), (12 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_PLLConfig), (20 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_RTCCLKCmd), (12 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_RTCCLKConfig), (16 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_SYSCLKConfig), (20 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_USBCLKConfig), (12 bytes).
+    Removing stm32f10x_rcc.o(i.RCC_WaitForHSEStartUp), (44 bytes).
+    Removing stm32f10x_usart.o(i.USART_ClearFlag), (6 bytes).
+    Removing stm32f10x_usart.o(i.USART_ClearITPendingBit), (12 bytes).
+    Removing stm32f10x_usart.o(i.USART_ClockInit), (30 bytes).
+    Removing stm32f10x_usart.o(i.USART_ClockStructInit), (12 bytes).
+    Removing stm32f10x_usart.o(i.USART_DMACmd), (16 bytes).
+    Removing stm32f10x_usart.o(i.USART_DeInit), (116 bytes).
+    Removing stm32f10x_usart.o(i.USART_GetFlagStatus), (14 bytes).
+    Removing stm32f10x_usart.o(i.USART_HalfDuplexCmd), (20 bytes).
+    Removing stm32f10x_usart.o(i.USART_IrDACmd), (20 bytes).
+    Removing stm32f10x_usart.o(i.USART_IrDAConfig), (16 bytes).
+    Removing stm32f10x_usart.o(i.USART_LINBreakDetectLengthConfig), (16 bytes).
+    Removing stm32f10x_usart.o(i.USART_LINCmd), (20 bytes).
+    Removing stm32f10x_usart.o(i.USART_OneBitMethodCmd), (20 bytes).
+    Removing stm32f10x_usart.o(i.USART_OverSampling8Cmd), (20 bytes).
+    Removing stm32f10x_usart.o(i.USART_ReceiverWakeUpCmd), (20 bytes).
+    Removing stm32f10x_usart.o(i.USART_SendBreak), (10 bytes).
+    Removing stm32f10x_usart.o(i.USART_SendData), (8 bytes).
+    Removing stm32f10x_usart.o(i.USART_SetAddress), (16 bytes).
+    Removing stm32f10x_usart.o(i.USART_SetGuardTime), (16 bytes).
+    Removing stm32f10x_usart.o(i.USART_SetPrescaler), (16 bytes).
+    Removing stm32f10x_usart.o(i.USART_SmartCardCmd), (20 bytes).
+    Removing stm32f10x_usart.o(i.USART_SmartCardNACKCmd), (20 bytes).
+    Removing stm32f10x_usart.o(i.USART_StructInit), (22 bytes).
+    Removing stm32f10x_usart.o(i.USART_WakeUpConfig), (16 bytes).
+    Removing stm32f10x_adc.o(i.ADC_AnalogWatchdogCmd), (16 bytes).
+    Removing stm32f10x_adc.o(i.ADC_AnalogWatchdogSingleChannelConfig), (12 bytes).
+    Removing stm32f10x_adc.o(i.ADC_AnalogWatchdogThresholdsConfig), (6 bytes).
+    Removing stm32f10x_adc.o(i.ADC_AutoInjectedConvCmd), (20 bytes).
+    Removing stm32f10x_adc.o(i.ADC_ClearFlag), (6 bytes).
+    Removing stm32f10x_adc.o(i.ADC_ClearITPendingBit), (8 bytes).
+    Removing stm32f10x_adc.o(i.ADC_Cmd), (20 bytes).
+    Removing stm32f10x_adc.o(i.ADC_DMACmd), (20 bytes).
+    Removing stm32f10x_adc.o(i.ADC_DeInit), (68 bytes).
+    Removing stm32f10x_adc.o(i.ADC_DiscModeChannelCountConfig), (16 bytes).
+    Removing stm32f10x_adc.o(i.ADC_DiscModeCmd), (20 bytes).
+    Removing stm32f10x_adc.o(i.ADC_ExternalTrigConvCmd), (20 bytes).
+    Removing stm32f10x_adc.o(i.ADC_ExternalTrigInjectedConvCmd), (20 bytes).
+    Removing stm32f10x_adc.o(i.ADC_ExternalTrigInjectedConvConfig), (12 bytes).
+    Removing stm32f10x_adc.o(i.ADC_GetCalibrationStatus), (14 bytes).
+    Removing stm32f10x_adc.o(i.ADC_GetConversionValue), (6 bytes).
+    Removing stm32f10x_adc.o(i.ADC_GetDualModeConversionValue), (12 bytes).
+    Removing stm32f10x_adc.o(i.ADC_GetFlagStatus), (14 bytes).
+    Removing stm32f10x_adc.o(i.ADC_GetITStatus), (28 bytes).
+    Removing stm32f10x_adc.o(i.ADC_GetInjectedConversionValue), (14 bytes).
+    Removing stm32f10x_adc.o(i.ADC_GetResetCalibrationStatus), (14 bytes).
+    Removing stm32f10x_adc.o(i.ADC_GetSoftwareStartConvStatus), (14 bytes).
+    Removing stm32f10x_adc.o(i.ADC_GetSoftwareStartInjectedConvCmdStatus), (14 bytes).
+    Removing stm32f10x_adc.o(i.ADC_ITConfig), (18 bytes).
+    Removing stm32f10x_adc.o(i.ADC_Init), (72 bytes).
+    Removing stm32f10x_adc.o(i.ADC_InjectedChannelConfig), (74 bytes).
+    Removing stm32f10x_adc.o(i.ADC_InjectedDiscModeCmd), (20 bytes).
+    Removing stm32f10x_adc.o(i.ADC_InjectedSequencerLengthConfig), (16 bytes).
+    Removing stm32f10x_adc.o(i.ADC_RegularChannelConfig), (116 bytes).
+    Removing stm32f10x_adc.o(i.ADC_ResetCalibration), (10 bytes).
+    Removing stm32f10x_adc.o(i.ADC_SetInjectedOffset), (10 bytes).
+    Removing stm32f10x_adc.o(i.ADC_SoftwareStartConvCmd), (20 bytes).
+    Removing stm32f10x_adc.o(i.ADC_SoftwareStartInjectedConvCmd), (20 bytes).
+    Removing stm32f10x_adc.o(i.ADC_StartCalibration), (10 bytes).
+    Removing stm32f10x_adc.o(i.ADC_StructInit), (18 bytes).
+    Removing stm32f10x_adc.o(i.ADC_TempSensorVrefintCmd), (28 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_ClearFlag), (16 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_ClearITPendingBit), (16 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_DeInit), (18 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_GetFlagStatus), (12 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_GetITStatus), (12 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_ITConfig), (12 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_RTCOutputConfig), (20 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_ReadBackupRegister), (16 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_SetRTCCalibrationValue), (20 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_TamperPinCmd), (12 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_TamperPinLevelConfig), (12 bytes).
+    Removing stm32f10x_bkp.o(i.BKP_WriteBackupRegister), (16 bytes).
+    Removing stm32f10x_can.o(i.CAN_CancelTransmit), (36 bytes).
+    Removing stm32f10x_can.o(i.CAN_ClearFlag), (48 bytes).
+    Removing stm32f10x_can.o(i.CAN_ClearITPendingBit), (120 bytes).
+    Removing stm32f10x_can.o(i.CAN_DBGFreeze), (20 bytes).
+    Removing stm32f10x_can.o(i.CAN_DeInit), (44 bytes).
+    Removing stm32f10x_can.o(i.CAN_FIFORelease), (22 bytes).
+    Removing stm32f10x_can.o(i.CAN_FilterInit), (204 bytes).
+    Removing stm32f10x_can.o(i.CAN_GetFlagStatus), (52 bytes).
+    Removing stm32f10x_can.o(i.CAN_GetITStatus), (168 bytes).
+    Removing stm32f10x_can.o(i.CAN_GetLSBTransmitErrorCounter), (8 bytes).
+    Removing stm32f10x_can.o(i.CAN_GetLastErrorCode), (10 bytes).
+    Removing stm32f10x_can.o(i.CAN_GetReceiveErrorCounter), (6 bytes).
+    Removing stm32f10x_can.o(i.CAN_ITConfig), (16 bytes).
+    Removing stm32f10x_can.o(i.CAN_Init), (232 bytes).
+    Removing stm32f10x_can.o(i.CAN_MessagePending), (22 bytes).
+    Removing stm32f10x_can.o(i.CAN_OperatingModeRequest), (140 bytes).
+    Removing stm32f10x_can.o(i.CAN_Receive), (142 bytes).
+    Removing stm32f10x_can.o(i.CAN_SlaveStartBank), (44 bytes).
+    Removing stm32f10x_can.o(i.CAN_Sleep), (30 bytes).
+    Removing stm32f10x_can.o(i.CAN_StructInit), (32 bytes).
+    Removing stm32f10x_can.o(i.CAN_TTComModeCmd), (90 bytes).
+    Removing stm32f10x_can.o(i.CAN_Transmit), (190 bytes).
+    Removing stm32f10x_can.o(i.CAN_TransmitStatus), (108 bytes).
+    Removing stm32f10x_can.o(i.CAN_WakeUp), (40 bytes).
+    Removing stm32f10x_can.o(i.CheckITStatus), (12 bytes).
+    Removing stm32f10x_cec.o(i.CEC_ClearFlag), (32 bytes).
+    Removing stm32f10x_cec.o(i.CEC_ClearITPendingBit), (32 bytes).
+    Removing stm32f10x_cec.o(i.CEC_Cmd), (28 bytes).
+    Removing stm32f10x_cec.o(i.CEC_DeInit), (24 bytes).
+    Removing stm32f10x_cec.o(i.CEC_EndOfMessageCmd), (12 bytes).
+    Removing stm32f10x_cec.o(i.CEC_GetFlagStatus), (36 bytes).
+    Removing stm32f10x_cec.o(i.CEC_GetITStatus), (36 bytes).
+    Removing stm32f10x_cec.o(i.CEC_ITConfig), (12 bytes).
+    Removing stm32f10x_cec.o(i.CEC_Init), (24 bytes).
+    Removing stm32f10x_cec.o(i.CEC_OwnAddressConfig), (12 bytes).
+    Removing stm32f10x_cec.o(i.CEC_ReceiveDataByte), (12 bytes).
+    Removing stm32f10x_cec.o(i.CEC_SendDataByte), (12 bytes).
+    Removing stm32f10x_cec.o(i.CEC_SetPrescaler), (12 bytes).
+    Removing stm32f10x_cec.o(i.CEC_StartOfMessage), (16 bytes).
+    Removing stm32f10x_crc.o(i.CRC_CalcBlockCRC), (28 bytes).
+    Removing stm32f10x_crc.o(i.CRC_CalcCRC), (12 bytes).
+    Removing stm32f10x_crc.o(i.CRC_GetCRC), (12 bytes).
+    Removing stm32f10x_crc.o(i.CRC_GetIDRegister), (12 bytes).
+    Removing stm32f10x_crc.o(i.CRC_ResetDR), (12 bytes).
+    Removing stm32f10x_crc.o(i.CRC_SetIDRegister), (12 bytes).
+    Removing stm32f10x_dac.o(i.DAC_Cmd), (24 bytes).
+    Removing stm32f10x_dac.o(i.DAC_DMACmd), (24 bytes).
+    Removing stm32f10x_dac.o(i.DAC_DeInit), (24 bytes).
+    Removing stm32f10x_dac.o(i.DAC_DualSoftwareTriggerCmd), (28 bytes).
+    Removing stm32f10x_dac.o(i.DAC_GetDataOutputValue), (24 bytes).
+    Removing stm32f10x_dac.o(i.DAC_Init), (40 bytes).
+    Removing stm32f10x_dac.o(i.DAC_SetChannel1Data), (20 bytes).
+    Removing stm32f10x_dac.o(i.DAC_SetChannel2Data), (20 bytes).
+    Removing stm32f10x_dac.o(i.DAC_SetDualChannelData), (28 bytes).
+    Removing stm32f10x_dac.o(i.DAC_SoftwareTriggerCmd), (28 bytes).
+    Removing stm32f10x_dac.o(i.DAC_StructInit), (12 bytes).
+    Removing stm32f10x_dac.o(i.DAC_WaveGenerationCmd), (24 bytes).
+    Removing stm32f10x_dma.o(i.DMA_ClearFlag), (24 bytes).
+    Removing stm32f10x_dma.o(i.DMA_ClearITPendingBit), (24 bytes).
+    Removing stm32f10x_dma.o(i.DMA_Cmd), (22 bytes).
+    Removing stm32f10x_dma.o(i.DMA_DeInit), (228 bytes).
+    Removing stm32f10x_dma.o(i.DMA_GetCurrDataCounter), (6 bytes).
+    Removing stm32f10x_dma.o(i.DMA_GetFlagStatus), (32 bytes).
+    Removing stm32f10x_dma.o(i.DMA_GetITStatus), (32 bytes).
+    Removing stm32f10x_dma.o(i.DMA_ITConfig), (16 bytes).
+    Removing stm32f10x_dma.o(i.DMA_Init), (58 bytes).
+    Removing stm32f10x_dma.o(i.DMA_SetCurrDataCounter), (4 bytes).
+    Removing stm32f10x_dma.o(i.DMA_StructInit), (26 bytes).
+    Removing stm32f10x_exti.o(i.EXTI_ClearFlag), (12 bytes).
+    Removing stm32f10x_exti.o(i.EXTI_ClearITPendingBit), (12 bytes).
+    Removing stm32f10x_exti.o(i.EXTI_DeInit), (36 bytes).
+    Removing stm32f10x_exti.o(i.EXTI_GenerateSWInterrupt), (16 bytes).
+    Removing stm32f10x_exti.o(i.EXTI_GetFlagStatus), (20 bytes).
+    Removing stm32f10x_exti.o(i.EXTI_GetITStatus), (32 bytes).
+    Removing stm32f10x_exti.o(i.EXTI_Init), (112 bytes).
+    Removing stm32f10x_exti.o(i.EXTI_StructInit), (14 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_ClearFlag), (12 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_EnableWriteProtection), (172 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_EraseAllBank1Pages), (56 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_EraseAllPages), (56 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_EraseOptionBytes), (124 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_ErasePage), (60 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_GetBank1Status), (40 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_GetFlagStatus), (32 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_GetPrefetchBufferStatus), (20 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_GetReadOutProtectionStatus), (20 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_GetStatus), (40 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_GetUserOptionByte), (12 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_GetWriteProtectionOptionByte), (12 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_HalfCycleAccessCmd), (24 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_ITConfig), (24 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_Lock), (16 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_LockBank1), (16 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_PrefetchBufferCmd), (24 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_ProgramHalfWord), (52 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_ProgramOptionByteData), (76 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_ProgramWord), (80 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_ReadOutProtection), (136 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_SetLatency), (20 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_Unlock), (24 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_UnlockBank1), (24 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_UserOptionByteConfig), (96 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_WaitForLastBank1Operation), (34 bytes).
+    Removing stm32f10x_flash.o(i.FLASH_WaitForLastOperation), (34 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_ClearFlag), (38 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_ClearITPendingBit), (42 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_GetECC), (18 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_GetFlagStatus), (40 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_GetITStatus), (48 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_ITConfig), (72 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_NANDCmd), (56 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_NANDDeInit), (40 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_NANDECCCmd), (56 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_NANDInit), (104 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_NANDStructInit), (54 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_NORSRAMCmd), (32 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_NORSRAMDeInit), (38 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_NORSRAMInit), (200 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_NORSRAMStructInit), (98 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_PCCARDCmd), (32 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_PCCARDDeInit), (26 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_PCCARDInit), (102 bytes).
+    Removing stm32f10x_fsmc.o(i.FSMC_PCCARDStructInit), (60 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_ARPCmd), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_AcknowledgeConfig), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_CalculatePEC), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_CheckEvent), (24 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_ClearFlag), (6 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_ClearITPendingBit), (6 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_Cmd), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_DMACmd), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_DMALastTransferCmd), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_DeInit), (44 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_DualAddressCmd), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_FastModeDutyCycleConfig), (22 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_GeneralCallCmd), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_GenerateSTART), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_GenerateSTOP), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_GetFlagStatus), (42 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_GetITStatus), (36 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_GetLastEvent), (14 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_GetPEC), (6 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_ITConfig), (16 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_Init), (188 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_NACKPositionConfig), (22 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_OwnAddress2Config), (16 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_PECPositionConfig), (22 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_ReadRegister), (10 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_ReceiveData), (6 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_SMBusAlertConfig), (22 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_Send7bitAddress), (16 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_SendData), (4 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_SoftwareResetCmd), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_StretchClockCmd), (20 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_StructInit), (28 bytes).
+    Removing stm32f10x_i2c.o(i.I2C_TransmitPEC), (20 bytes).
+    Removing stm32f10x_iwdg.o(i.IWDG_Enable), (16 bytes).
+    Removing stm32f10x_iwdg.o(i.IWDG_GetFlagStatus), (20 bytes).
+    Removing stm32f10x_iwdg.o(i.IWDG_ReloadCounter), (16 bytes).
+    Removing stm32f10x_iwdg.o(i.IWDG_SetPrescaler), (12 bytes).
+    Removing stm32f10x_iwdg.o(i.IWDG_SetReload), (12 bytes).
+    Removing stm32f10x_iwdg.o(i.IWDG_WriteAccessCmd), (12 bytes).
+    Removing stm32f10x_pwr.o(i.PWR_BackupAccessCmd), (12 bytes).
+    Removing stm32f10x_pwr.o(i.PWR_ClearFlag), (16 bytes).
+    Removing stm32f10x_pwr.o(i.PWR_DeInit), (24 bytes).
+    Removing stm32f10x_pwr.o(i.PWR_EnterSTANDBYMode), (40 bytes).
+    Removing stm32f10x_pwr.o(i.PWR_EnterSTOPMode), (52 bytes).
+    Removing stm32f10x_pwr.o(i.PWR_GetFlagStatus), (20 bytes).
+    Removing stm32f10x_pwr.o(i.PWR_PVDCmd), (12 bytes).
+    Removing stm32f10x_pwr.o(i.PWR_PVDLevelConfig), (20 bytes).
+    Removing stm32f10x_pwr.o(i.PWR_WakeUpPinCmd), (12 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_ClearFlag), (16 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_ClearITPendingBit), (16 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_EnterConfigMode), (16 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_ExitConfigMode), (16 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_GetCounter), (20 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_GetDivider), (24 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_GetFlagStatus), (20 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_GetITStatus), (32 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_ITConfig), (24 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_SetAlarm), (32 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_SetCounter), (32 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_SetPrescaler), (32 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_WaitForLastTask), (16 bytes).
+    Removing stm32f10x_rtc.o(i.RTC_WaitForSynchro), (24 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_CEATAITCmd), (16 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_ClearFlag), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_ClearITPendingBit), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_ClockCmd), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_CmdStructInit), (14 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_CommandCompletionCmd), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_DMACmd), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_DataConfig), (44 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_DataStructInit), (20 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_DeInit), (36 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_GetCommandResponse), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_GetDataCounter), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_GetFIFOCount), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_GetFlagStatus), (20 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_GetITStatus), (20 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_GetPowerState), (16 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_GetResponse), (16 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_ITConfig), (24 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_Init), (44 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_ReadData), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_SendCEATACmd), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_SendCommand), (40 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_SendSDIOSuspendCmd), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_SetPowerState), (24 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_SetSDIOOperation), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_SetSDIOReadWaitMode), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_StartSDIOReadWait), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_StopSDIOReadWait), (12 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_StructInit), (16 bytes).
+    Removing stm32f10x_sdio.o(i.SDIO_WriteData), (12 bytes).
+    Removing stm32f10x_spi.o(i.I2S_Cmd), (20 bytes).
+    Removing stm32f10x_spi.o(i.I2S_Init), (150 bytes).
+    Removing stm32f10x_spi.o(i.I2S_StructInit), (18 bytes).
+    Removing stm32f10x_spi.o(i.SPI_BiDirectionalLineConfig), (22 bytes).
+    Removing stm32f10x_spi.o(i.SPI_CalculateCRC), (20 bytes).
+    Removing stm32f10x_spi.o(i.SPI_Cmd), (20 bytes).
+    Removing stm32f10x_spi.o(i.SPI_DataSizeConfig), (16 bytes).
+    Removing stm32f10x_spi.o(i.SPI_GetCRC), (12 bytes).
+    Removing stm32f10x_spi.o(i.SPI_GetCRCPolynomial), (4 bytes).
+    Removing stm32f10x_spi.o(i.SPI_I2S_ClearFlag), (6 bytes).
+    Removing stm32f10x_spi.o(i.SPI_I2S_ClearITPendingBit), (14 bytes).
+    Removing stm32f10x_spi.o(i.SPI_I2S_DMACmd), (16 bytes).
+    Removing stm32f10x_spi.o(i.SPI_I2S_DeInit), (84 bytes).
+    Removing stm32f10x_spi.o(i.SPI_I2S_GetFlagStatus), (14 bytes).
+    Removing stm32f10x_spi.o(i.SPI_I2S_GetITStatus), (44 bytes).
+    Removing stm32f10x_spi.o(i.SPI_I2S_ITConfig), (24 bytes).
+    Removing stm32f10x_spi.o(i.SPI_I2S_ReceiveData), (4 bytes).
+    Removing stm32f10x_spi.o(i.SPI_I2S_SendData), (4 bytes).
+    Removing stm32f10x_spi.o(i.SPI_Init), (56 bytes).
+    Removing stm32f10x_spi.o(i.SPI_NSSInternalSoftwareConfig), (24 bytes).
+    Removing stm32f10x_spi.o(i.SPI_SSOutputCmd), (20 bytes).
+    Removing stm32f10x_spi.o(i.SPI_StructInit), (24 bytes).
+    Removing stm32f10x_spi.o(i.SPI_TransmitCRC), (10 bytes).
+    Removing stm32f10x_tim.o(i.TI1_Config), (108 bytes).
+    Removing stm32f10x_tim.o(i.TI2_Config), (124 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ARRPreloadConfig), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_BDTRConfig), (34 bytes).
+    Removing stm32f10x_tim.o(i.TIM_BDTRStructInit), (18 bytes).
+    Removing stm32f10x_tim.o(i.TIM_CCPreloadControl), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_CCxCmd), (22 bytes).
+    Removing stm32f10x_tim.o(i.TIM_CCxNCmd), (22 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ClearFlag), (6 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ClearITPendingBit), (6 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ClearOC1Ref), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ClearOC2Ref), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ClearOC3Ref), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ClearOC4Ref), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_Cmd), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_CounterModeConfig), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_CtrlPWMOutputs), (22 bytes).
+    Removing stm32f10x_tim.o(i.TIM_DMACmd), (16 bytes).
+    Removing stm32f10x_tim.o(i.TIM_DMAConfig), (8 bytes).
+    Removing stm32f10x_tim.o(i.TIM_DeInit), (368 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ETRClockMode1Config), (18 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ETRClockMode2Config), (18 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ETRConfig), (24 bytes).
+    Removing stm32f10x_tim.o(i.TIM_EncoderInterfaceConfig), (50 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ForcedOC1Config), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ForcedOC2Config), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ForcedOC3Config), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ForcedOC4Config), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_GenerateEvent), (4 bytes).
+    Removing stm32f10x_tim.o(i.TIM_GetCapture1), (4 bytes).
+    Removing stm32f10x_tim.o(i.TIM_GetCapture2), (4 bytes).
+    Removing stm32f10x_tim.o(i.TIM_GetCapture3), (4 bytes).
+    Removing stm32f10x_tim.o(i.TIM_GetCapture4), (6 bytes).
+    Removing stm32f10x_tim.o(i.TIM_GetCounter), (4 bytes).
+    Removing stm32f10x_tim.o(i.TIM_GetFlagStatus), (14 bytes).
+    Removing stm32f10x_tim.o(i.TIM_GetITStatus), (24 bytes).
+    Removing stm32f10x_tim.o(i.TIM_GetPrescaler), (4 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ICInit), (300 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ICStructInit), (16 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ITConfig), (16 bytes).
+    Removing stm32f10x_tim.o(i.TIM_ITRxExternalClockConfig), (18 bytes).
+    Removing stm32f10x_tim.o(i.TIM_InternalClockConfig), (10 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC1FastConfig), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC1Init), (128 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC1NPolarityConfig), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC1PolarityConfig), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC1PreloadConfig), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC2FastConfig), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC2Init), (128 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC2NPolarityConfig), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC2PolarityConfig), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC2PreloadConfig), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC3FastConfig), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC3Init), (124 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC3NPolarityConfig), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC3PolarityConfig), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC3PreloadConfig), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC4FastConfig), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC4Init), (100 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC4PolarityConfig), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OC4PreloadConfig), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_OCStructInit), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_PWMIConfig), (108 bytes).
+    Removing stm32f10x_tim.o(i.TIM_PrescalerConfig), (6 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SelectCCDMA), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SelectCOM), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SelectHallSensor), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SelectInputTrigger), (12 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SelectMasterSlaveMode), (16 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SelectOCxM), (70 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SelectOnePulseMode), (16 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SelectOutputTrigger), (16 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SelectSlaveMode), (16 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SetAutoreload), (4 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SetClockDivision), (16 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SetCompare1), (4 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SetCompare2), (4 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SetCompare3), (4 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SetCompare4), (6 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SetCounter), (4 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SetIC1Prescaler), (16 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SetIC2Prescaler), (24 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SetIC3Prescaler), (16 bytes).
+    Removing stm32f10x_tim.o(i.TIM_SetIC4Prescaler), (24 bytes).
+    Removing stm32f10x_tim.o(i.TIM_TIxExternalClockConfig), (46 bytes).
+    Removing stm32f10x_tim.o(i.TIM_TimeBaseInit), (156 bytes).
+    Removing stm32f10x_tim.o(i.TIM_TimeBaseStructInit), (18 bytes).
+    Removing stm32f10x_tim.o(i.TIM_UpdateDisableConfig), (20 bytes).
+    Removing stm32f10x_tim.o(i.TIM_UpdateRequestConfig), (20 bytes).
+    Removing stm32f10x_wwdg.o(i.WWDG_ClearFlag), (12 bytes).
+    Removing stm32f10x_wwdg.o(i.WWDG_DeInit), (24 bytes).
+    Removing stm32f10x_wwdg.o(i.WWDG_Enable), (16 bytes).
+    Removing stm32f10x_wwdg.o(i.WWDG_EnableIT), (16 bytes).
+    Removing stm32f10x_wwdg.o(i.WWDG_GetFlagStatus), (12 bytes).
+    Removing stm32f10x_wwdg.o(i.WWDG_SetCounter), (16 bytes).
+    Removing stm32f10x_wwdg.o(i.WWDG_SetPrescaler), (20 bytes).
+    Removing stm32f10x_wwdg.o(i.WWDG_SetWindowValue), (28 bytes).
+    Removing event_groups.o(i.prvTestWaitCondition), (20 bytes).
+    Removing event_groups.o(i.uxEventGroupGetNumber), (8 bytes).
+    Removing event_groups.o(i.vEventGroupClearBitsCallback), (4 bytes).
+    Removing event_groups.o(i.vEventGroupDelete), (116 bytes).
+    Removing event_groups.o(i.vEventGroupSetBitsCallback), (4 bytes).
+    Removing event_groups.o(i.xEventGroupClearBits), (100 bytes).
+    Removing event_groups.o(i.xEventGroupClearBitsFromISR), (16 bytes).
+    Removing event_groups.o(i.xEventGroupCreate), (26 bytes).
+    Removing event_groups.o(i.xEventGroupGetBitsFromISR), (26 bytes).
+    Removing event_groups.o(i.xEventGroupSetBits), (176 bytes).
+    Removing event_groups.o(i.xEventGroupSetBitsFromISR), (16 bytes).
+    Removing event_groups.o(i.xEventGroupSync), (224 bytes).
+    Removing event_groups.o(i.xEventGroupWaitBits), (288 bytes).
+    Removing queue.o(i.pcQueueGetName), (40 bytes).
+    Removing queue.o(i.ucQueueGetQueueType), (6 bytes).
+    Removing queue.o(i.uxQueueGetQueueNumber), (4 bytes).
+    Removing queue.o(i.uxQueueMessagesWaiting), (68 bytes).
+    Removing queue.o(i.uxQueueMessagesWaitingFromISR), (60 bytes).
+    Removing queue.o(i.uxQueueSpacesAvailable), (72 bytes).
+    Removing queue.o(i.vQueueDelete), (72 bytes).
+    Removing queue.o(i.vQueueSetQueueNumber), (4 bytes).
+    Removing queue.o(i.vQueueUnregisterQueue), (40 bytes).
+    Removing queue.o(i.xQueueAddToSet), (34 bytes).
+    Removing queue.o(i.xQueueCreateCountingSemaphore), (92 bytes).
+    Removing queue.o(i.xQueueCreateMutex), (36 bytes).
+    Removing queue.o(i.xQueueCreateSet), (8 bytes).
+    Removing queue.o(i.xQueueGiveFromISR), (200 bytes).
+    Removing queue.o(i.xQueueGiveMutexRecursive), (92 bytes).
+    Removing queue.o(i.xQueueIsQueueEmptyFromISR), (68 bytes).
+    Removing queue.o(i.xQueueIsQueueFullFromISR), (72 bytes).
+    Removing queue.o(i.xQueuePeekFromISR), (140 bytes).
+    Removing queue.o(i.xQueueReceiveFromISR), (180 bytes).
+    Removing queue.o(i.xQueueRemoveFromSet), (34 bytes).
+    Removing queue.o(i.xQueueSelectFromSet), (18 bytes).
+    Removing queue.o(i.xQueueSelectFromSetFromISR), (18 bytes).
+    Removing queue.o(i.xQueueTakeMutexRecursive), (100 bytes).
+    Removing tasks.o(i.eTaskGetState), (136 bytes).
+    Removing tasks.o(i.pcTaskGetName), (76 bytes).
+    Removing tasks.o(i.prvListTasksWithinSingleList), (86 bytes).
+    Removing tasks.o(i.prvTaskIsTaskSuspended), (84 bytes).
+    Removing tasks.o(i.ulTaskNotifyTake), (104 bytes).
+    Removing tasks.o(i.uxTaskGetNumberOfTasks), (12 bytes).
+    Removing tasks.o(i.uxTaskGetSystemState), (172 bytes).
+    Removing tasks.o(i.uxTaskGetTaskNumber), (8 bytes).
+    Removing tasks.o(i.uxTaskPriorityGet), (28 bytes).
+    Removing tasks.o(i.uxTaskPriorityGetFromISR), (44 bytes).
+    Removing tasks.o(i.uxTaskResetEventItemValue), (24 bytes).
+    Removing tasks.o(i.vTaskDelayUntil), (172 bytes).
+    Removing tasks.o(i.vTaskEndScheduler), (28 bytes).
+    Removing tasks.o(i.vTaskGetInfo), (132 bytes).
+    Removing tasks.o(i.vTaskList), (208 bytes).
+    Removing tasks.o(i.vTaskNotifyGiveFromISR), (212 bytes).
+    Removing tasks.o(i.vTaskPlaceOnUnorderedEventList), (112 bytes).
+    Removing tasks.o(i.vTaskPrioritySet), (228 bytes).
+    Removing tasks.o(i.vTaskResume), (160 bytes).
+    Removing tasks.o(i.vTaskSetTaskNumber), (8 bytes).
+    Removing tasks.o(i.vTaskSuspend), (208 bytes).
+    Removing tasks.o(i.xTaskGenericNotify), (232 bytes).
+    Removing tasks.o(i.xTaskGenericNotifyFromISR), (268 bytes).
+    Removing tasks.o(i.xTaskGetCurrentTaskHandle), (12 bytes).
+    Removing tasks.o(i.xTaskGetTickCountFromISR), (16 bytes).
+    Removing tasks.o(i.xTaskNotifyStateClear), (48 bytes).
+    Removing tasks.o(i.xTaskNotifyWait), (140 bytes).
+    Removing tasks.o(i.xTaskRemoveFromUnorderedEventList), (152 bytes).
+    Removing tasks.o(i.xTaskResumeFromISR), (172 bytes).
+    Removing timers.o(i.pcTimerGetName), (64 bytes).
+    Removing timers.o(i.pvTimerGetTimerID), (72 bytes).
+    Removing timers.o(i.vTimerSetTimerID), (76 bytes).
+    Removing timers.o(i.xTimerGetExpiryTime), (64 bytes).
+    Removing timers.o(i.xTimerGetPeriod), (64 bytes).
+    Removing timers.o(i.xTimerGetTimerDaemonTaskHandle), (68 bytes).
+    Removing timers.o(i.xTimerIsTimerActive), (80 bytes).
+    Removing timers.o(i.xTimerPendFunctionCall), (104 bytes).
+    Removing timers.o(i.xTimerPendFunctionCallFromISR), (40 bytes).
+    Removing heap_4.o(i.vPortInitialiseBlocks), (2 bytes).
+    Removing heap_4.o(i.xPortGetFreeHeapSize), (12 bytes).
+    Removing heap_4.o(i.xPortGetMinimumEverFreeHeapSize), (12 bytes).
+    Removing port.o(i.vPortEndScheduler), (88 bytes).
+
+542 unused section(s) (total 20978 bytes) removed from the image.
+
+==============================================================================
+
+Image Symbol Table
+
+    Local Symbols
+
+    Symbol Name                              Value     Ov Type        Size  Object(Section)
+
+    ../clib/angel/boardlib.s                 0x00000000   Number         0  boardinit2.o ABSOLUTE
+    ../clib/angel/boardlib.s                 0x00000000   Number         0  boardinit3.o ABSOLUTE
+    ../clib/angel/boardlib.s                 0x00000000   Number         0  boardshut.o ABSOLUTE
+    ../clib/angel/boardlib.s                 0x00000000   Number         0  boardinit1.o ABSOLUTE
+    ../clib/angel/handlers.s                 0x00000000   Number         0  __scatter_zi.o ABSOLUTE
+    ../clib/angel/handlers.s                 0x00000000   Number         0  __scatter_copy.o ABSOLUTE
+    ../clib/angel/kernel.s                   0x00000000   Number         0  rtexit.o ABSOLUTE
+    ../clib/angel/kernel.s                   0x00000000   Number         0  __rtentry4.o ABSOLUTE
+    ../clib/angel/kernel.s                   0x00000000   Number         0  __rtentry2.o ABSOLUTE
+    ../clib/angel/kernel.s                   0x00000000   Number         0  __rtentry.o ABSOLUTE
+    ../clib/angel/kernel.s                   0x00000000   Number         0  rtexit2.o ABSOLUTE
+    ../clib/angel/rt.s                       0x00000000   Number         0  rt_raise.o ABSOLUTE
+    ../clib/angel/scatter.s                  0x00000000   Number         0  __scatter.o ABSOLUTE
+    ../clib/angel/startup.s                  0x00000000   Number         0  __main.o ABSOLUTE
+    ../clib/angel/sys.s                      0x00000000   Number         0  sys_stackheap_outer.o ABSOLUTE
+    ../clib/angel/sys.s                      0x00000000   Number         0  indicate_semi.o ABSOLUTE
+    ../clib/angel/sys.s                      0x00000000   Number         0  use_no_semi_2.o ABSOLUTE
+    ../clib/angel/sys.s                      0x00000000   Number         0  use_no_semi.o ABSOLUTE
+    ../clib/angel/sys.s                      0x00000000   Number         0  libspace.o ABSOLUTE
+    ../clib/angel/sysapp.c                   0x00000000   Number         0  sys_wrch.o ABSOLUTE
+    ../clib/angel/sysapp.c                   0x00000000   Number         0  sys_command.o ABSOLUTE
+    ../clib/armsys.c                         0x00000000   Number         0  argv_veneer.o ABSOLUTE
+    ../clib/armsys.c                         0x00000000   Number         0  argv_veneer.o ABSOLUTE
+    ../clib/armsys.c                         0x00000000   Number         0  no_argv.o ABSOLUTE
+    ../clib/armsys.c                         0x00000000   Number         0  _get_argv_nomalloc.o ABSOLUTE
+    ../clib/heapalloc.c                      0x00000000   Number         0  hrguard.o ABSOLUTE
+    ../clib/heapaux.c                        0x00000000   Number         0  heapauxi.o ABSOLUTE
+    ../clib/libinit.s                        0x00000000   Number         0  libinit.o ABSOLUTE
+    ../clib/libinit.s                        0x00000000   Number         0  libinit2.o ABSOLUTE
+    ../clib/libinit.s                        0x00000000   Number         0  libshutdown.o ABSOLUTE
+    ../clib/libinit.s                        0x00000000   Number         0  libshutdown2.o ABSOLUTE
+    ../clib/memcpset.s                       0x00000000   Number         0  rt_memclr_w.o ABSOLUTE
+    ../clib/memcpset.s                       0x00000000   Number         0  rt_memclr.o ABSOLUTE
+    ../clib/memcpset.s                       0x00000000   Number         0  rt_memcpy_w.o ABSOLUTE
+    ../clib/memcpset.s                       0x00000000   Number         0  rt_memcpy_v6.o ABSOLUTE
+    ../clib/memcpset.s                       0x00000000   Number         0  aeabi_memset.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  noretval__2printf.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  __printf_nopercent.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  __printf_flags_ss_wp.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  __printf_ss_wp.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  _printf_dec.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  _printf_intcommon.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  _printf_char_common.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  _sputc.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  __2printf.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  __2sprintf.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  noretval__2sprintf.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  __printf.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  _printf_str.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  __printf_flags.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  __printf_ss.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  __printf_flags_ss.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  __printf_wp.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  _printf_char.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  _printf_char_file.o ABSOLUTE
+    ../clib/printf.c                         0x00000000   Number         0  __printf_flags_wp.o ABSOLUTE
+    ../clib/printf_percent.s                 0x00000000   Number         0  _printf_s.o ABSOLUTE
+    ../clib/printf_percent.s                 0x00000000   Number         0  _printf_percent_end.o ABSOLUTE
+    ../clib/printf_percent.s                 0x00000000   Number         0  _printf_u.o ABSOLUTE
+    ../clib/printf_percent.s                 0x00000000   Number         0  _printf_percent.o ABSOLUTE
+    ../clib/printf_percent.s                 0x00000000   Number         0  _printf_d.o ABSOLUTE
+    ../clib/printf_percent.s                 0x00000000   Number         0  _printf_c.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_abrt_inner.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_stak_inner.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_general.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  __raise.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_rtmem_inner.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_exit.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_rtmem_formal.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_fpe_inner.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_rtred_inner.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_pvfn_inner.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_cppl_inner.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_segv_inner.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_other.o ABSOLUTE
+    ../clib/signal.c                         0x00000000   Number         0  defsig_rtmem_outer.o ABSOLUTE
+    ../clib/signal.s                         0x00000000   Number         0  defsig.o ABSOLUTE
+    ../clib/stdio.c                          0x00000000   Number         0  ferror.o ABSOLUTE
+    ../clib/stdio.c                          0x00000000   Number         0  ferror_locked.o ABSOLUTE
+    ../clib/stdlib.c                         0x00000000   Number         0  exit.o ABSOLUTE
+    ../clib/string.c                         0x00000000   Number         0  strlen.o ABSOLUTE
+    ../clib/string.c                         0x00000000   Number         0  strcpy.o ABSOLUTE
+    ../fplib/fpinit.s                        0x00000000   Number         0  fpinit.o ABSOLUTE
+    ..\CORE\core_cm3.c                       0x00000000   Number         0  core_cm3.o ABSOLUTE
+    ..\CORE\startup_stm32f10x_hd.s           0x00000000   Number         0  startup_stm32f10x_hd.o ABSOLUTE
+    ..\FreeRTOS\croutine.c                   0x00000000   Number         0  croutine.o ABSOLUTE
+    ..\FreeRTOS\event_groups.c               0x00000000   Number         0  event_groups.o ABSOLUTE
+    ..\FreeRTOS\list.c                       0x00000000   Number         0  list.o ABSOLUTE
+    ..\FreeRTOS\portable\MemMang\heap_4.c    0x00000000   Number         0  heap_4.o ABSOLUTE
+    ..\FreeRTOS\portable\RVDS\ARM_CM3\port.c 0x00000000   Number         0  port.o ABSOLUTE
+    ..\FreeRTOS\queue.c                      0x00000000   Number         0  queue.o ABSOLUTE
+    ..\FreeRTOS\tasks.c                      0x00000000   Number         0  tasks.o ABSOLUTE
+    ..\FreeRTOS\timers.c                     0x00000000   Number         0  timers.o ABSOLUTE
+    ..\HARDWARE\LED\LED.c                    0x00000000   Number         0  led.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\misc.c            0x00000000   Number         0  misc.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_adc.c   0x00000000   Number         0  stm32f10x_adc.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_bkp.c   0x00000000   Number         0  stm32f10x_bkp.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_can.c   0x00000000   Number         0  stm32f10x_can.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_cec.c   0x00000000   Number         0  stm32f10x_cec.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_crc.c   0x00000000   Number         0  stm32f10x_crc.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_dac.c   0x00000000   Number         0  stm32f10x_dac.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_dbgmcu.c 0x00000000   Number         0  stm32f10x_dbgmcu.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_dma.c   0x00000000   Number         0  stm32f10x_dma.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_exti.c  0x00000000   Number         0  stm32f10x_exti.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_flash.c 0x00000000   Number         0  stm32f10x_flash.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_fsmc.c  0x00000000   Number         0  stm32f10x_fsmc.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_gpio.c  0x00000000   Number         0  stm32f10x_gpio.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_i2c.c   0x00000000   Number         0  stm32f10x_i2c.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_iwdg.c  0x00000000   Number         0  stm32f10x_iwdg.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_pwr.c   0x00000000   Number         0  stm32f10x_pwr.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_rcc.c   0x00000000   Number         0  stm32f10x_rcc.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_rtc.c   0x00000000   Number         0  stm32f10x_rtc.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_sdio.c  0x00000000   Number         0  stm32f10x_sdio.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_spi.c   0x00000000   Number         0  stm32f10x_spi.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_tim.c   0x00000000   Number         0  stm32f10x_tim.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_usart.c 0x00000000   Number         0  stm32f10x_usart.o ABSOLUTE
+    ..\STM32F10x_FWLib\src\stm32f10x_wwdg.c  0x00000000   Number         0  stm32f10x_wwdg.o ABSOLUTE
+    ..\SYSTEM\sys\sys.c                      0x00000000   Number         0  sys.o ABSOLUTE
+    ..\SYSTEM\usart\usart.c                  0x00000000   Number         0  usart.o ABSOLUTE
+    ..\TASK\Init_task\Init_task.c            0x00000000   Number         0  init_task.o ABSOLUTE
+    ..\TASK\LED_task\LED_task.c              0x00000000   Number         0  led_task.o ABSOLUTE
+    ..\\CORE\\core_cm3.c                     0x00000000   Number         0  core_cm3.o ABSOLUTE
+    ..\\FreeRTOS\\portable\\RVDS\\ARM_CM3\\port.c 0x00000000   Number         0  port.o ABSOLUTE
+    dc.s                                     0x00000000   Number         0  dc.o ABSOLUTE
+    main.c                                   0x00000000   Number         0  main.o ABSOLUTE
+    stm32f10x_it.c                           0x00000000   Number         0  stm32f10x_it.o ABSOLUTE
+    system_stm32f10x.c                       0x00000000   Number         0  system_stm32f10x.o ABSOLUTE
+    RESET                                    0x08000000   Section      304  startup_stm32f10x_hd.o(RESET)
+    !!!main                                  0x08000130   Section        8  __main.o(!!!main)
+    !!!scatter                               0x08000138   Section       52  __scatter.o(!!!scatter)
+    !!handler_copy                           0x0800016c   Section       26  __scatter_copy.o(!!handler_copy)
+    !!handler_zi                             0x08000188   Section       28  __scatter_zi.o(!!handler_zi)
+    .ARM.Collect$$_printf_percent$$00000000  0x080001a4   Section        0  _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000)
+    .ARM.Collect$$_printf_percent$$00000009  0x080001a4   Section        6  _printf_d.o(.ARM.Collect$$_printf_percent$$00000009)
+    .ARM.Collect$$_printf_percent$$00000014  0x080001aa   Section        6  _printf_s.o(.ARM.Collect$$_printf_percent$$00000014)
+    .ARM.Collect$$_printf_percent$$00000017  0x080001b0   Section        4  _printf_percent_end.o(.ARM.Collect$$_printf_percent$$00000017)
+    .ARM.Collect$$libinit$$00000000          0x080001b4   Section        2  libinit.o(.ARM.Collect$$libinit$$00000000)
+    .ARM.Collect$$libinit$$00000002          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000002)
+    .ARM.Collect$$libinit$$00000004          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000004)
+    .ARM.Collect$$libinit$$0000000A          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$0000000A)
+    .ARM.Collect$$libinit$$0000000C          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$0000000C)
+    .ARM.Collect$$libinit$$0000000E          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$0000000E)
+    .ARM.Collect$$libinit$$00000011          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000011)
+    .ARM.Collect$$libinit$$00000013          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000013)
+    .ARM.Collect$$libinit$$00000015          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000015)
+    .ARM.Collect$$libinit$$00000017          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000017)
+    .ARM.Collect$$libinit$$00000019          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000019)
+    .ARM.Collect$$libinit$$0000001B          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$0000001B)
+    .ARM.Collect$$libinit$$0000001D          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$0000001D)
+    .ARM.Collect$$libinit$$0000001F          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$0000001F)
+    .ARM.Collect$$libinit$$00000021          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000021)
+    .ARM.Collect$$libinit$$00000023          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000023)
+    .ARM.Collect$$libinit$$00000025          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000025)
+    .ARM.Collect$$libinit$$0000002C          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$0000002C)
+    .ARM.Collect$$libinit$$0000002E          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$0000002E)
+    .ARM.Collect$$libinit$$00000030          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000030)
+    .ARM.Collect$$libinit$$00000032          0x080001b6   Section        0  libinit2.o(.ARM.Collect$$libinit$$00000032)
+    .ARM.Collect$$libinit$$00000033          0x080001b6   Section        2  libinit2.o(.ARM.Collect$$libinit$$00000033)
+    .ARM.Collect$$libshutdown$$00000000      0x080001b8   Section        2  libshutdown.o(.ARM.Collect$$libshutdown$$00000000)
+    .ARM.Collect$$libshutdown$$00000002      0x080001ba   Section        0  libshutdown2.o(.ARM.Collect$$libshutdown$$00000002)
+    .ARM.Collect$$libshutdown$$00000004      0x080001ba   Section        0  libshutdown2.o(.ARM.Collect$$libshutdown$$00000004)
+    .ARM.Collect$$libshutdown$$00000006      0x080001ba   Section        0  libshutdown2.o(.ARM.Collect$$libshutdown$$00000006)
+    .ARM.Collect$$libshutdown$$00000009      0x080001ba   Section        0  libshutdown2.o(.ARM.Collect$$libshutdown$$00000009)
+    .ARM.Collect$$libshutdown$$0000000C      0x080001ba   Section        0  libshutdown2.o(.ARM.Collect$$libshutdown$$0000000C)
+    .ARM.Collect$$libshutdown$$0000000E      0x080001ba   Section        0  libshutdown2.o(.ARM.Collect$$libshutdown$$0000000E)
+    .ARM.Collect$$libshutdown$$00000011      0x080001ba   Section        0  libshutdown2.o(.ARM.Collect$$libshutdown$$00000011)
+    .ARM.Collect$$libshutdown$$00000012      0x080001ba   Section        2  libshutdown2.o(.ARM.Collect$$libshutdown$$00000012)
+    .ARM.Collect$$rtentry$$00000000          0x080001bc   Section        0  __rtentry.o(.ARM.Collect$$rtentry$$00000000)
+    .ARM.Collect$$rtentry$$00000002          0x080001bc   Section        0  __rtentry2.o(.ARM.Collect$$rtentry$$00000002)
+    .ARM.Collect$$rtentry$$00000004          0x080001bc   Section        6  __rtentry4.o(.ARM.Collect$$rtentry$$00000004)
+    .ARM.Collect$$rtentry$$00000009          0x080001c2   Section        0  __rtentry2.o(.ARM.Collect$$rtentry$$00000009)
+    .ARM.Collect$$rtentry$$0000000A          0x080001c2   Section        4  __rtentry2.o(.ARM.Collect$$rtentry$$0000000A)
+    .ARM.Collect$$rtentry$$0000000C          0x080001c6   Section        0  __rtentry2.o(.ARM.Collect$$rtentry$$0000000C)
+    .ARM.Collect$$rtentry$$0000000D          0x080001c6   Section        8  __rtentry2.o(.ARM.Collect$$rtentry$$0000000D)
+    .ARM.Collect$$rtexit$$00000000           0x080001ce   Section        2  rtexit.o(.ARM.Collect$$rtexit$$00000000)
+    .ARM.Collect$$rtexit$$00000002           0x080001d0   Section        0  rtexit2.o(.ARM.Collect$$rtexit$$00000002)
+    .ARM.Collect$$rtexit$$00000003           0x080001d0   Section        4  rtexit2.o(.ARM.Collect$$rtexit$$00000003)
+    .ARM.Collect$$rtexit$$00000004           0x080001d4   Section        6  rtexit2.o(.ARM.Collect$$rtexit$$00000004)
+    .emb_text                                0x080001dc   Section      150  port.o(.emb_text)
+    .text                                    0x08000274   Section       64  startup_stm32f10x_hd.o(.text)
+    .text                                    0x080002b4   Section        2  use_no_semi_2.o(.text)
+    .text                                    0x080002b8   Section        0  noretval__2printf.o(.text)
+    .text                                    0x080002d0   Section        0  __printf.o(.text)
+    .text                                    0x08000338   Section        0  _printf_str.o(.text)
+    .text                                    0x0800038c   Section        0  _printf_dec.o(.text)
+    .text                                    0x08000404   Section      138  rt_memcpy_v6.o(.text)
+    .text                                    0x0800048e   Section       16  aeabi_memset.o(.text)
+    .text                                    0x0800049e   Section        0  heapauxi.o(.text)
+    .text                                    0x080004a4   Section        2  use_no_semi.o(.text)
+    .text                                    0x080004a6   Section        0  _printf_intcommon.o(.text)
+    .text                                    0x08000558   Section        0  _printf_char_common.o(.text)
+    _printf_input_char                       0x08000559   Thumb Code    10  _printf_char_common.o(.text)
+    .text                                    0x08000588   Section        0  _printf_char.o(.text)
+    .text                                    0x080005b4   Section        0  _printf_char_file.o(.text)
+    .text                                    0x080005d8   Section      100  rt_memcpy_w.o(.text)
+    .text                                    0x0800063c   Section       68  rt_memclr.o(.text)
+    .text                                    0x08000680   Section        0  ferror.o(.text)
+    .text                                    0x08000688   Section       78  rt_memclr_w.o(.text)
+    .text                                    0x080006d6   Section       74  sys_stackheap_outer.o(.text)
+    .text                                    0x08000720   Section        0  exit.o(.text)
+    .text                                    0x08000734   Section        8  libspace.o(.text)
+    i.BusFault_Handler                       0x0800073c   Section        0  stm32f10x_it.o(i.BusFault_Handler)
+    i.DebugMon_Handler                       0x0800073e   Section        0  stm32f10x_it.o(i.DebugMon_Handler)
+    i.GPIO_Init                              0x08000740   Section        0  stm32f10x_gpio.o(i.GPIO_Init)
+    i.GPIO_SetBits                           0x080007dc   Section        0  stm32f10x_gpio.o(i.GPIO_SetBits)
+    i.HardFault_Handler                      0x080007e0   Section        0  stm32f10x_it.o(i.HardFault_Handler)
+    i.Init                                   0x080007e2   Section        0  main.o(i.Init)
+    i.Init_task                              0x080007fc   Section        0  init_task.o(i.Init_task)
+    i.LED0_task                              0x08000830   Section        0  led_task.o(i.LED0_task)
+    i.LED1_task                              0x08000854   Section        0  led_task.o(i.LED1_task)
+    i.LED_Init                               0x0800087c   Section        0  led.o(i.LED_Init)
+    i.LED_task_Create                        0x080008dc   Section        0  led_task.o(i.LED_task_Create)
+    i.MemManage_Handler                      0x0800092c   Section        0  stm32f10x_it.o(i.MemManage_Handler)
+    i.NMI_Handler                            0x0800092e   Section        0  stm32f10x_it.o(i.NMI_Handler)
+    i.NVIC_Init                              0x08000930   Section        0  misc.o(i.NVIC_Init)
+    i.NVIC_PriorityGroupConfig               0x08000994   Section        0  misc.o(i.NVIC_PriorityGroupConfig)
+    i.RCC_APB2PeriphClockCmd                 0x080009a8   Section        0  stm32f10x_rcc.o(i.RCC_APB2PeriphClockCmd)
+    i.RCC_GetClocksFreq                      0x080009c0   Section        0  stm32f10x_rcc.o(i.RCC_GetClocksFreq)
+    i.SetSysClockTo72                        0x08000a54   Section        0  system_stm32f10x.o(i.SetSysClockTo72)
+    SetSysClockTo72                          0x08000a55   Thumb Code   160  system_stm32f10x.o(i.SetSysClockTo72)
+    i.SysTick_Handler                        0x08000afc   Section        0  sys.o(i.SysTick_Handler)
+    i.SystemInit                             0x08000b10   Section        0  system_stm32f10x.o(i.SystemInit)
+    i.USART1_IRQHandler                      0x08000b60   Section        0  usart.o(i.USART1_IRQHandler)
+    i.USART_Cmd                              0x08000bc4   Section        0  stm32f10x_usart.o(i.USART_Cmd)
+    i.USART_GetITStatus                      0x08000bd8   Section        0  stm32f10x_usart.o(i.USART_GetITStatus)
+    i.USART_ITConfig                         0x08000c16   Section        0  stm32f10x_usart.o(i.USART_ITConfig)
+    i.USART_Init                             0x08000c48   Section        0  stm32f10x_usart.o(i.USART_Init)
+    i.USART_ReceiveData                      0x08000cf4   Section        0  stm32f10x_usart.o(i.USART_ReceiveData)
+    i.UsageFault_Handler                     0x08000cfc   Section        0  stm32f10x_it.o(i.UsageFault_Handler)
+    i._sys_exit                              0x08000cfe   Section        0  usart.o(i._sys_exit)
+    i.fputc                                  0x08000d00   Section        0  usart.o(i.fputc)
+    i.main                                   0x08000d18   Section        0  main.o(i.main)
+    i.prvAddCurrentTaskToDelayedList         0x08000d28   Section        0  tasks.o(i.prvAddCurrentTaskToDelayedList)
+    prvAddCurrentTaskToDelayedList           0x08000d29   Thumb Code   102  tasks.o(i.prvAddCurrentTaskToDelayedList)
+    i.prvAddNewTaskToReadyList               0x08000d98   Section        0  tasks.o(i.prvAddNewTaskToReadyList)
+    prvAddNewTaskToReadyList                 0x08000d99   Thumb Code   192  tasks.o(i.prvAddNewTaskToReadyList)
+    i.prvCheckForValidListAndQueue           0x08000e68   Section        0  timers.o(i.prvCheckForValidListAndQueue)
+    prvCheckForValidListAndQueue             0x08000e69   Thumb Code    62  timers.o(i.prvCheckForValidListAndQueue)
+    i.prvCheckTasksWaitingTermination        0x08000eb8   Section        0  tasks.o(i.prvCheckTasksWaitingTermination)
+    prvCheckTasksWaitingTermination          0x08000eb9   Thumb Code    74  tasks.o(i.prvCheckTasksWaitingTermination)
+    i.prvCopyDataFromQueue                   0x08000f0c   Section        0  queue.o(i.prvCopyDataFromQueue)
+    prvCopyDataFromQueue                     0x08000f0d   Thumb Code    38  queue.o(i.prvCopyDataFromQueue)
+    i.prvCopyDataToQueue                     0x08000f32   Section        0  queue.o(i.prvCopyDataToQueue)
+    prvCopyDataToQueue                       0x08000f33   Thumb Code   108  queue.o(i.prvCopyDataToQueue)
+    i.prvDeleteTCB                           0x08000f9e   Section        0  tasks.o(i.prvDeleteTCB)
+    prvDeleteTCB                             0x08000f9f   Thumb Code    20  tasks.o(i.prvDeleteTCB)
+    i.prvHeapInit                            0x08000fb4   Section        0  heap_4.o(i.prvHeapInit)
+    prvHeapInit                              0x08000fb5   Thumb Code    66  heap_4.o(i.prvHeapInit)
+    i.prvIdleTask                            0x08001000   Section        0  tasks.o(i.prvIdleTask)
+    prvIdleTask                              0x08001001   Thumb Code    30  tasks.o(i.prvIdleTask)
+    i.prvInitialiseNewTask                   0x08001028   Section        0  tasks.o(i.prvInitialiseNewTask)
+    prvInitialiseNewTask                     0x08001029   Thumb Code   154  tasks.o(i.prvInitialiseNewTask)
+    i.prvInsertBlockIntoFreeList             0x080010e8   Section        0  heap_4.o(i.prvInsertBlockIntoFreeList)
+    prvInsertBlockIntoFreeList               0x080010e9   Thumb Code    72  heap_4.o(i.prvInsertBlockIntoFreeList)
+    i.prvInsertTimerInActiveList             0x08001134   Section        0  timers.o(i.prvInsertTimerInActiveList)
+    prvInsertTimerInActiveList               0x08001135   Thumb Code    52  timers.o(i.prvInsertTimerInActiveList)
+    i.prvIsQueueEmpty                        0x0800116c   Section        0  queue.o(i.prvIsQueueEmpty)
+    prvIsQueueEmpty                          0x0800116d   Thumb Code    26  queue.o(i.prvIsQueueEmpty)
+    i.prvNotifyQueueSetContainer             0x08001188   Section        0  queue.o(i.prvNotifyQueueSetContainer)
+    prvNotifyQueueSetContainer               0x08001189   Thumb Code   108  queue.o(i.prvNotifyQueueSetContainer)
+    i.prvProcessExpiredTimer                 0x08001218   Section        0  timers.o(i.prvProcessExpiredTimer)
+    prvProcessExpiredTimer                   0x08001219   Thumb Code    86  timers.o(i.prvProcessExpiredTimer)
+    i.prvProcessReceivedCommands             0x08001278   Section        0  timers.o(i.prvProcessReceivedCommands)
+    prvProcessReceivedCommands               0x08001279   Thumb Code   196  timers.o(i.prvProcessReceivedCommands)
+    i.prvProcessTimerOrBlockTask             0x08001368   Section        0  timers.o(i.prvProcessTimerOrBlockTask)
+    prvProcessTimerOrBlockTask               0x08001369   Thumb Code    98  timers.o(i.prvProcessTimerOrBlockTask)
+    i.prvResetNextTaskUnblockTime            0x080013d4   Section        0  tasks.o(i.prvResetNextTaskUnblockTime)
+    prvResetNextTaskUnblockTime              0x080013d5   Thumb Code    26  tasks.o(i.prvResetNextTaskUnblockTime)
+    i.prvSampleTimeNow                       0x080013f4   Section        0  timers.o(i.prvSampleTimeNow)
+    prvSampleTimeNow                         0x080013f5   Thumb Code    36  timers.o(i.prvSampleTimeNow)
+    i.prvSwitchTimerLists                    0x0800141c   Section        0  timers.o(i.prvSwitchTimerLists)
+    prvSwitchTimerLists                      0x0800141d   Thumb Code   100  timers.o(i.prvSwitchTimerLists)
+    i.prvTaskExitError                       0x08001488   Section        0  port.o(i.prvTaskExitError)
+    prvTaskExitError                         0x08001489   Thumb Code    34  port.o(i.prvTaskExitError)
+    i.prvTimerTask                           0x080014ec   Section        0  timers.o(i.prvTimerTask)
+    prvTimerTask                             0x080014ed   Thumb Code    34  timers.o(i.prvTimerTask)
+    i.prvUnlockQueue                         0x08001514   Section        0  queue.o(i.prvUnlockQueue)
+    prvUnlockQueue                           0x08001515   Thumb Code   120  queue.o(i.prvUnlockQueue)
+    i.pvPortMalloc                           0x0800158c   Section        0  heap_4.o(i.pvPortMalloc)
+    i.pvTaskIncrementMutexHeldCount          0x080016a0   Section        0  tasks.o(i.pvTaskIncrementMutexHeldCount)
+    i.pxPortInitialiseStack                  0x080016b8   Section        0  port.o(i.pxPortInitialiseStack)
+    i.start_task                             0x080016dc   Section        0  init_task.o(i.start_task)
+    i.uart_init                              0x080016fc   Section        0  usart.o(i.uart_init)
+    i.uxListRemove                           0x0800179c   Section        0  list.o(i.uxListRemove)
+    i.vListInitialise                        0x080017c0   Section        0  list.o(i.vListInitialise)
+    i.vListInitialiseItem                    0x080017d6   Section        0  list.o(i.vListInitialiseItem)
+    i.vListInsert                            0x080017dc   Section        0  list.o(i.vListInsert)
+    i.vListInsertEnd                         0x0800180c   Section        0  list.o(i.vListInsertEnd)
+    i.vPortEnterCritical                     0x08001824   Section        0  port.o(i.vPortEnterCritical)
+    i.vPortExitCritical                      0x0800189c   Section        0  port.o(i.vPortExitCritical)
+    i.vPortFree                              0x08001900   Section        0  heap_4.o(i.vPortFree)
+    i.vPortSetupTimerInterrupt               0x0800199c   Section        0  port.o(i.vPortSetupTimerInterrupt)
+    i.vPortValidateInterruptPriority         0x080019bc   Section        0  port.o(i.vPortValidateInterruptPriority)
+    i.vQueueAddToRegistry                    0x08001a48   Section        0  queue.o(i.vQueueAddToRegistry)
+    i.vQueueWaitForMessageRestricted         0x08001a6c   Section        0  queue.o(i.vQueueWaitForMessageRestricted)
+    i.vTaskDelay                             0x08001ab0   Section        0  tasks.o(i.vTaskDelay)
+    i.vTaskDelete                            0x08001b1c   Section        0  tasks.o(i.vTaskDelete)
+    i.vTaskMissedYield                       0x08001be8   Section        0  tasks.o(i.vTaskMissedYield)
+    i.vTaskPlaceOnEventList                  0x08001bf4   Section        0  tasks.o(i.vTaskPlaceOnEventList)
+    i.vTaskPlaceOnEventListRestricted        0x08001c48   Section        0  tasks.o(i.vTaskPlaceOnEventListRestricted)
+    i.vTaskPriorityInherit                   0x08001ca4   Section        0  tasks.o(i.vTaskPriorityInherit)
+    i.vTaskSetTimeOutState                   0x08001d28   Section        0  tasks.o(i.vTaskSetTimeOutState)
+    i.vTaskStartScheduler                    0x08001d70   Section        0  tasks.o(i.vTaskStartScheduler)
+    i.vTaskSuspendAll                        0x08001e04   Section        0  tasks.o(i.vTaskSuspendAll)
+    i.vTaskSwitchContext                     0x08001e14   Section        0  tasks.o(i.vTaskSwitchContext)
+    i.xPortStartScheduler                    0x08001e90   Section        0  port.o(i.xPortStartScheduler)
+    i.xPortSysTickHandler                    0x08001f08   Section        0  port.o(i.xPortSysTickHandler)
+    i.xQueueGenericCreate                    0x08001f34   Section        0  queue.o(i.xQueueGenericCreate)
+    i.xQueueGenericReceive                   0x08001fac   Section        0  queue.o(i.xQueueGenericReceive)
+    i.xQueueGenericReset                     0x08002130   Section        0  queue.o(i.xQueueGenericReset)
+    i.xQueueGenericSend                      0x080021d8   Section        0  queue.o(i.xQueueGenericSend)
+    i.xQueueGenericSendFromISR               0x08002360   Section        0  queue.o(i.xQueueGenericSendFromISR)
+    i.xTaskCheckForTimeOut                   0x08002440   Section        0  tasks.o(i.xTaskCheckForTimeOut)
+    i.xTaskCreate                            0x080024c8   Section        0  tasks.o(i.xTaskCreate)
+    i.xTaskGetSchedulerState                 0x08002520   Section        0  tasks.o(i.xTaskGetSchedulerState)
+    i.xTaskGetTickCount                      0x0800253c   Section        0  tasks.o(i.xTaskGetTickCount)
+    i.xTaskIncrementTick                     0x08002548   Section        0  tasks.o(i.xTaskIncrementTick)
+    i.xTaskPriorityDisinherit                0x08002630   Section        0  tasks.o(i.xTaskPriorityDisinherit)
+    i.xTaskRemoveFromEventList               0x080026e4   Section        0  tasks.o(i.xTaskRemoveFromEventList)
+    i.xTaskResumeAll                         0x0800277c   Section        0  tasks.o(i.xTaskResumeAll)
+    i.xTimerCreate                           0x08002860   Section        0  timers.o(i.xTimerCreate)
+    i.xTimerCreateTimerTask                  0x080028d4   Section        0  timers.o(i.xTimerCreateTimerTask)
+    i.xTimerGenericCommand                   0x08002948   Section        0  timers.o(i.xTimerGenericCommand)
+    .data                                    0x20000000   Section       20  system_stm32f10x.o(.data)
+    .data                                    0x20000014   Section        4  init_task.o(.data)
+    .data                                    0x20000018   Section        8  led_task.o(.data)
+    .data                                    0x20000020   Section        2  usart.o(.data)
+    .data                                    0x20000024   Section        4  usart.o(.data)
+    .data                                    0x20000028   Section       20  stm32f10x_rcc.o(.data)
+    ADCPrescTable                            0x20000028   Data           4  stm32f10x_rcc.o(.data)
+    APBAHBPrescTable                         0x2000002c   Data          16  stm32f10x_rcc.o(.data)
+    .data                                    0x2000003c   Section       60  tasks.o(.data)
+    uxDeletedTasksWaitingCleanUp             0x20000040   Data           4  tasks.o(.data)
+    uxCurrentNumberOfTasks                   0x20000044   Data           4  tasks.o(.data)
+    xTickCount                               0x20000048   Data           4  tasks.o(.data)
+    uxTopReadyPriority                       0x2000004c   Data           4  tasks.o(.data)
+    xSchedulerRunning                        0x20000050   Data           4  tasks.o(.data)
+    uxPendedTicks                            0x20000054   Data           4  tasks.o(.data)
+    xYieldPending                            0x20000058   Data           4  tasks.o(.data)
+    xNumOfOverflows                          0x2000005c   Data           4  tasks.o(.data)
+    uxTaskNumber                             0x20000060   Data           4  tasks.o(.data)
+    xNextTaskUnblockTime                     0x20000064   Data           4  tasks.o(.data)
+    xIdleTaskHandle                          0x20000068   Data           4  tasks.o(.data)
+    uxSchedulerSuspended                     0x2000006c   Data           4  tasks.o(.data)
+    pxDelayedTaskList                        0x20000070   Data           4  tasks.o(.data)
+    pxOverflowDelayedTaskList                0x20000074   Data           4  tasks.o(.data)
+    .data                                    0x20000078   Section       20  timers.o(.data)
+    xTimerQueue                              0x20000078   Data           4  timers.o(.data)
+    xTimerTaskHandle                         0x2000007c   Data           4  timers.o(.data)
+    xLastTime                                0x20000080   Data           4  timers.o(.data)
+    pxCurrentTimerList                       0x20000084   Data           4  timers.o(.data)
+    pxOverflowTimerList                      0x20000088   Data           4  timers.o(.data)
+    .data                                    0x2000008c   Section       24  heap_4.o(.data)
+    pxEnd                                    0x2000008c   Data           4  heap_4.o(.data)
+    xFreeBytesRemaining                      0x20000090   Data           4  heap_4.o(.data)
+    xMinimumEverFreeBytesRemaining           0x20000094   Data           4  heap_4.o(.data)
+    xBlockAllocatedBit                       0x20000098   Data           4  heap_4.o(.data)
+    xStart                                   0x2000009c   Data           8  heap_4.o(.data)
+    .data                                    0x200000a4   Section       12  port.o(.data)
+    ucMaxSysCallPriority                     0x200000a4   Data           1  port.o(.data)
+    uxCriticalNesting                        0x200000a8   Data           4  port.o(.data)
+    ulMaxPRIGROUPValue                       0x200000ac   Data           4  port.o(.data)
+    .bss                                     0x200000b0   Section      200  usart.o(.bss)
+    .bss                                     0x20000178   Section       64  queue.o(.bss)
+    .bss                                     0x200001b8   Section      740  tasks.o(.bss)
+    pxReadyTasksLists                        0x200001b8   Data         640  tasks.o(.bss)
+    xDelayedTaskList1                        0x20000438   Data          20  tasks.o(.bss)
+    xDelayedTaskList2                        0x2000044c   Data          20  tasks.o(.bss)
+    xPendingReadyList                        0x20000460   Data          20  tasks.o(.bss)
+    xTasksWaitingTermination                 0x20000474   Data          20  tasks.o(.bss)
+    xSuspendedTaskList                       0x20000488   Data          20  tasks.o(.bss)
+    .bss                                     0x2000049c   Section       40  timers.o(.bss)
+    xActiveTimerList1                        0x2000049c   Data          20  timers.o(.bss)
+    xActiveTimerList2                        0x200004b0   Data          20  timers.o(.bss)
+    .bss                                     0x200004c4   Section    20480  heap_4.o(.bss)
+    ucHeap                                   0x200004c4   Data       20480  heap_4.o(.bss)
+    .bss                                     0x200054c4   Section       96  libspace.o(.bss)
+    HEAP                                     0x20005528   Section      512  startup_stm32f10x_hd.o(HEAP)
+    Heap_Mem                                 0x20005528   Data         512  startup_stm32f10x_hd.o(HEAP)
+    STACK                                    0x20005728   Section     1024  startup_stm32f10x_hd.o(STACK)
+    Stack_Mem                                0x20005728   Data        1024  startup_stm32f10x_hd.o(STACK)
+    __initial_sp                             0x20005b28   Data           0  startup_stm32f10x_hd.o(STACK)
+
+    Global Symbols
+
+    Symbol Name                              Value     Ov Type        Size  Object(Section)
+
+    BuildAttributes$$THM_ISAv4$P$D$K$B$S$PE$A:L22UL41UL21$X:L11$S22US41US21$IEEE1$IW$USESV6$~STKCKD$USESV7$~SHL$OSPACE$ROPI$EBA8$UX$STANDARDLIB$REQ8$PRES8$EABIv2 0x00000000   Number         0  anon$$obj.o ABSOLUTE
+    __ARM_use_no_argv                        0x00000000   Number         0  main.o ABSOLUTE
+    __ARM_exceptions_init                     - Undefined Weak Reference
+    __alloca_initialize                       - Undefined Weak Reference
+    __arm_fini_                               - Undefined Weak Reference
+    __arm_preinit_                            - Undefined Weak Reference
+    __cpp_initialize__aeabi_                  - Undefined Weak Reference
+    __cxa_finalize                            - Undefined Weak Reference
+    __rt_locale                               - Undefined Weak Reference
+    __sigvec_lookup                           - Undefined Weak Reference
+    _atexit_init                              - Undefined Weak Reference
+    _call_atexit_fns                          - Undefined Weak Reference
+    _clock_init                               - Undefined Weak Reference
+    _fp_trap_init                             - Undefined Weak Reference
+    _fp_trap_shutdown                         - Undefined Weak Reference
+    _get_lc_collate                           - Undefined Weak Reference
+    _get_lc_ctype                             - Undefined Weak Reference
+    _get_lc_monetary                          - Undefined Weak Reference
+    _get_lc_numeric                           - Undefined Weak Reference
+    _get_lc_time                              - Undefined Weak Reference
+    _getenv_init                              - Undefined Weak Reference
+    _handle_redirection                       - Undefined Weak Reference
+    _init_alloc                               - Undefined Weak Reference
+    _init_user_alloc                          - Undefined Weak Reference
+    _initio                                   - Undefined Weak Reference
+    _mutex_acquire                            - Undefined Weak Reference
+    _mutex_release                            - Undefined Weak Reference
+    _printf_mbtowc                            - Undefined Weak Reference
+    _printf_post_padding                      - Undefined Weak Reference
+    _printf_pre_padding                       - Undefined Weak Reference
+    _printf_truncate_signed                   - Undefined Weak Reference
+    _printf_truncate_unsigned                 - Undefined Weak Reference
+    _rand_init                                - Undefined Weak Reference
+    _signal_finish                            - Undefined Weak Reference
+    _signal_init                              - Undefined Weak Reference
+    _terminate_alloc                          - Undefined Weak Reference
+    _terminate_user_alloc                     - Undefined Weak Reference
+    _terminateio                              - Undefined Weak Reference
+    __Vectors_Size                           0x00000130   Number         0  startup_stm32f10x_hd.o ABSOLUTE
+    __Vectors                                0x08000000   Data           4  startup_stm32f10x_hd.o(RESET)
+    __Vectors_End                            0x08000130   Data           0  startup_stm32f10x_hd.o(RESET)
+    __main                                   0x08000131   Thumb Code     8  __main.o(!!!main)
+    __scatterload                            0x08000139   Thumb Code     0  __scatter.o(!!!scatter)
+    __scatterload_rt2                        0x08000139   Thumb Code    44  __scatter.o(!!!scatter)
+    __scatterload_rt2_thumb_only             0x08000139   Thumb Code     0  __scatter.o(!!!scatter)
+    __scatterload_null                       0x08000147   Thumb Code     0  __scatter.o(!!!scatter)
+    __scatterload_copy                       0x0800016d   Thumb Code    26  __scatter_copy.o(!!handler_copy)
+    __scatterload_zeroinit                   0x08000189   Thumb Code    28  __scatter_zi.o(!!handler_zi)
+    _printf_d                                0x080001a5   Thumb Code     0  _printf_d.o(.ARM.Collect$$_printf_percent$$00000009)
+    _printf_percent                          0x080001a5   Thumb Code     0  _printf_percent.o(.ARM.Collect$$_printf_percent$$00000000)
+    _printf_s                                0x080001ab   Thumb Code     0  _printf_s.o(.ARM.Collect$$_printf_percent$$00000014)
+    _printf_percent_end                      0x080001b1   Thumb Code     0  _printf_percent_end.o(.ARM.Collect$$_printf_percent$$00000017)
+    __rt_lib_init                            0x080001b5   Thumb Code     0  libinit.o(.ARM.Collect$$libinit$$00000000)
+    __rt_lib_init_alloca_1                   0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$0000002E)
+    __rt_lib_init_argv_1                     0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$0000002C)
+    __rt_lib_init_atexit_1                   0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$0000001B)
+    __rt_lib_init_clock_1                    0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000021)
+    __rt_lib_init_cpp_1                      0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000032)
+    __rt_lib_init_exceptions_1               0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000030)
+    __rt_lib_init_fp_1                       0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000002)
+    __rt_lib_init_fp_trap_1                  0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$0000001F)
+    __rt_lib_init_getenv_1                   0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000023)
+    __rt_lib_init_heap_1                     0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$0000000A)
+    __rt_lib_init_lc_collate_1               0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000011)
+    __rt_lib_init_lc_ctype_1                 0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000013)
+    __rt_lib_init_lc_monetary_1              0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000015)
+    __rt_lib_init_lc_numeric_1               0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000017)
+    __rt_lib_init_lc_time_1                  0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000019)
+    __rt_lib_init_preinit_1                  0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000004)
+    __rt_lib_init_rand_1                     0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$0000000E)
+    __rt_lib_init_return                     0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000033)
+    __rt_lib_init_signal_1                   0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$0000001D)
+    __rt_lib_init_stdio_1                    0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$00000025)
+    __rt_lib_init_user_alloc_1               0x080001b7   Thumb Code     0  libinit2.o(.ARM.Collect$$libinit$$0000000C)
+    __rt_lib_shutdown                        0x080001b9   Thumb Code     0  libshutdown.o(.ARM.Collect$$libshutdown$$00000000)
+    __rt_lib_shutdown_cpp_1                  0x080001bb   Thumb Code     0  libshutdown2.o(.ARM.Collect$$libshutdown$$00000004)
+    __rt_lib_shutdown_fini_1                 0x080001bb   Thumb Code     0  libshutdown2.o(.ARM.Collect$$libshutdown$$00000002)
+    __rt_lib_shutdown_fp_trap_1              0x080001bb   Thumb Code     0  libshutdown2.o(.ARM.Collect$$libshutdown$$00000009)
+    __rt_lib_shutdown_heap_1                 0x080001bb   Thumb Code     0  libshutdown2.o(.ARM.Collect$$libshutdown$$00000011)
+    __rt_lib_shutdown_return                 0x080001bb   Thumb Code     0  libshutdown2.o(.ARM.Collect$$libshutdown$$00000012)
+    __rt_lib_shutdown_signal_1               0x080001bb   Thumb Code     0  libshutdown2.o(.ARM.Collect$$libshutdown$$0000000C)
+    __rt_lib_shutdown_stdio_1                0x080001bb   Thumb Code     0  libshutdown2.o(.ARM.Collect$$libshutdown$$00000006)
+    __rt_lib_shutdown_user_alloc_1           0x080001bb   Thumb Code     0  libshutdown2.o(.ARM.Collect$$libshutdown$$0000000E)
+    __rt_entry                               0x080001bd   Thumb Code     0  __rtentry.o(.ARM.Collect$$rtentry$$00000000)
+    __rt_entry_presh_1                       0x080001bd   Thumb Code     0  __rtentry2.o(.ARM.Collect$$rtentry$$00000002)
+    __rt_entry_sh                            0x080001bd   Thumb Code     0  __rtentry4.o(.ARM.Collect$$rtentry$$00000004)
+    __rt_entry_li                            0x080001c3   Thumb Code     0  __rtentry2.o(.ARM.Collect$$rtentry$$0000000A)
+    __rt_entry_postsh_1                      0x080001c3   Thumb Code     0  __rtentry2.o(.ARM.Collect$$rtentry$$00000009)
+    __rt_entry_main                          0x080001c7   Thumb Code     0  __rtentry2.o(.ARM.Collect$$rtentry$$0000000D)
+    __rt_entry_postli_1                      0x080001c7   Thumb Code     0  __rtentry2.o(.ARM.Collect$$rtentry$$0000000C)
+    __rt_exit                                0x080001cf   Thumb Code     0  rtexit.o(.ARM.Collect$$rtexit$$00000000)
+    __rt_exit_ls                             0x080001d1   Thumb Code     0  rtexit2.o(.ARM.Collect$$rtexit$$00000003)
+    __rt_exit_prels_1                        0x080001d1   Thumb Code     0  rtexit2.o(.ARM.Collect$$rtexit$$00000002)
+    __rt_exit_exit                           0x080001d5   Thumb Code     0  rtexit2.o(.ARM.Collect$$rtexit$$00000004)
+    SVC_Handler                              0x080001dd   Thumb Code    32  port.o(.emb_text)
+    __asm___6_port_c_39a90d8d__prvStartFirstTask 0x08000201   Thumb Code    28  port.o(.emb_text)
+    PendSV_Handler                           0x08000221   Thumb Code    72  port.o(.emb_text)
+    vPortGetIPSR                             0x0800026d   Thumb Code     6  port.o(.emb_text)
+    Reset_Handler                            0x08000275   Thumb Code     8  startup_stm32f10x_hd.o(.text)
+    ADC1_2_IRQHandler                        0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    ADC3_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    CAN1_RX1_IRQHandler                      0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    CAN1_SCE_IRQHandler                      0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    DMA1_Channel1_IRQHandler                 0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    DMA1_Channel2_IRQHandler                 0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    DMA1_Channel3_IRQHandler                 0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    DMA1_Channel4_IRQHandler                 0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    DMA1_Channel5_IRQHandler                 0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    DMA1_Channel6_IRQHandler                 0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    DMA1_Channel7_IRQHandler                 0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    DMA2_Channel1_IRQHandler                 0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    DMA2_Channel2_IRQHandler                 0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    DMA2_Channel3_IRQHandler                 0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    DMA2_Channel4_5_IRQHandler               0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    EXTI0_IRQHandler                         0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    EXTI15_10_IRQHandler                     0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    EXTI1_IRQHandler                         0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    EXTI2_IRQHandler                         0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    EXTI3_IRQHandler                         0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    EXTI4_IRQHandler                         0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    EXTI9_5_IRQHandler                       0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    FLASH_IRQHandler                         0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    FSMC_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    I2C1_ER_IRQHandler                       0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    I2C1_EV_IRQHandler                       0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    I2C2_ER_IRQHandler                       0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    I2C2_EV_IRQHandler                       0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    PVD_IRQHandler                           0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    RCC_IRQHandler                           0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    RTCAlarm_IRQHandler                      0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    RTC_IRQHandler                           0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    SDIO_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    SPI1_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    SPI2_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    SPI3_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TAMPER_IRQHandler                        0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM1_BRK_IRQHandler                      0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM1_CC_IRQHandler                       0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM1_TRG_COM_IRQHandler                  0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM1_UP_IRQHandler                       0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM2_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM3_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM4_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM5_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM6_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM7_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM8_BRK_IRQHandler                      0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM8_CC_IRQHandler                       0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM8_TRG_COM_IRQHandler                  0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    TIM8_UP_IRQHandler                       0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    UART4_IRQHandler                         0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    UART5_IRQHandler                         0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    USART2_IRQHandler                        0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    USART3_IRQHandler                        0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    USBWakeUp_IRQHandler                     0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    USB_HP_CAN1_TX_IRQHandler                0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    USB_LP_CAN1_RX0_IRQHandler               0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    WWDG_IRQHandler                          0x0800028f   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    __user_initial_stackheap                 0x08000291   Thumb Code     0  startup_stm32f10x_hd.o(.text)
+    __use_no_semihosting                     0x080002b5   Thumb Code     2  use_no_semi_2.o(.text)
+    __2printf                                0x080002b9   Thumb Code    20  noretval__2printf.o(.text)
+    __printf                                 0x080002d1   Thumb Code   104  __printf.o(.text)
+    _printf_str                              0x08000339   Thumb Code    82  _printf_str.o(.text)
+    _printf_int_dec                          0x0800038d   Thumb Code   104  _printf_dec.o(.text)
+    __aeabi_memcpy                           0x08000405   Thumb Code     0  rt_memcpy_v6.o(.text)
+    __rt_memcpy                              0x08000405   Thumb Code   138  rt_memcpy_v6.o(.text)
+    _memcpy_lastbytes                        0x0800046b   Thumb Code     0  rt_memcpy_v6.o(.text)
+    __aeabi_memset                           0x0800048f   Thumb Code    16  aeabi_memset.o(.text)
+    __use_two_region_memory                  0x0800049f   Thumb Code     2  heapauxi.o(.text)
+    __rt_heap_escrow$2region                 0x080004a1   Thumb Code     2  heapauxi.o(.text)
+    __rt_heap_expand$2region                 0x080004a3   Thumb Code     2  heapauxi.o(.text)
+    __I$use$semihosting                      0x080004a5   Thumb Code     0  use_no_semi.o(.text)
+    __use_no_semihosting_swi                 0x080004a5   Thumb Code     2  use_no_semi.o(.text)
+    _printf_int_common                       0x080004a7   Thumb Code   178  _printf_intcommon.o(.text)
+    _printf_char_common                      0x08000563   Thumb Code    32  _printf_char_common.o(.text)
+    _printf_cs_common                        0x08000589   Thumb Code    20  _printf_char.o(.text)
+    _printf_char                             0x0800059d   Thumb Code    16  _printf_char.o(.text)
+    _printf_string                           0x080005ad   Thumb Code     8  _printf_char.o(.text)
+    _printf_char_file                        0x080005b5   Thumb Code    32  _printf_char_file.o(.text)
+    __aeabi_memcpy4                          0x080005d9   Thumb Code     0  rt_memcpy_w.o(.text)
+    __aeabi_memcpy8                          0x080005d9   Thumb Code     0  rt_memcpy_w.o(.text)
+    __rt_memcpy_w                            0x080005d9   Thumb Code   100  rt_memcpy_w.o(.text)
+    _memcpy_lastbytes_aligned                0x08000621   Thumb Code     0  rt_memcpy_w.o(.text)
+    __aeabi_memclr                           0x0800063d   Thumb Code     0  rt_memclr.o(.text)
+    __rt_memclr                              0x0800063d   Thumb Code    68  rt_memclr.o(.text)
+    _memset                                  0x08000641   Thumb Code     0  rt_memclr.o(.text)
+    ferror                                   0x08000681   Thumb Code     8  ferror.o(.text)
+    __aeabi_memclr4                          0x08000689   Thumb Code     0  rt_memclr_w.o(.text)
+    __aeabi_memclr8                          0x08000689   Thumb Code     0  rt_memclr_w.o(.text)
+    __rt_memclr_w                            0x08000689   Thumb Code    78  rt_memclr_w.o(.text)
+    _memset_w                                0x0800068d   Thumb Code     0  rt_memclr_w.o(.text)
+    __user_setup_stackheap                   0x080006d7   Thumb Code    74  sys_stackheap_outer.o(.text)
+    exit                                     0x08000721   Thumb Code    18  exit.o(.text)
+    __user_libspace                          0x08000735   Thumb Code     8  libspace.o(.text)
+    __user_perproc_libspace                  0x08000735   Thumb Code     0  libspace.o(.text)
+    __user_perthread_libspace                0x08000735   Thumb Code     0  libspace.o(.text)
+    BusFault_Handler                         0x0800073d   Thumb Code     2  stm32f10x_it.o(i.BusFault_Handler)
+    DebugMon_Handler                         0x0800073f   Thumb Code     2  stm32f10x_it.o(i.DebugMon_Handler)
+    GPIO_Init                                0x08000741   Thumb Code   156  stm32f10x_gpio.o(i.GPIO_Init)
+    GPIO_SetBits                             0x080007dd   Thumb Code     4  stm32f10x_gpio.o(i.GPIO_SetBits)
+    HardFault_Handler                        0x080007e1   Thumb Code     2  stm32f10x_it.o(i.HardFault_Handler)
+    Init                                     0x080007e3   Thumb Code    26  main.o(i.Init)
+    Init_task                                0x080007fd   Thumb Code    30  init_task.o(i.Init_task)
+    LED0_task                                0x08000831   Thumb Code    32  led_task.o(i.LED0_task)
+    LED1_task                                0x08000855   Thumb Code    36  led_task.o(i.LED1_task)
+    LED_Init                                 0x0800087d   Thumb Code    86  led.o(i.LED_Init)
+    LED_task_Create                          0x080008dd   Thumb Code    44  led_task.o(i.LED_task_Create)
+    MemManage_Handler                        0x0800092d   Thumb Code     2  stm32f10x_it.o(i.MemManage_Handler)
+    NMI_Handler                              0x0800092f   Thumb Code     2  stm32f10x_it.o(i.NMI_Handler)
+    NVIC_Init                                0x08000931   Thumb Code    94  misc.o(i.NVIC_Init)
+    NVIC_PriorityGroupConfig                 0x08000995   Thumb Code    10  misc.o(i.NVIC_PriorityGroupConfig)
+    RCC_APB2PeriphClockCmd                   0x080009a9   Thumb Code    18  stm32f10x_rcc.o(i.RCC_APB2PeriphClockCmd)
+    RCC_GetClocksFreq                        0x080009c1   Thumb Code   132  stm32f10x_rcc.o(i.RCC_GetClocksFreq)
+    SysTick_Handler                          0x08000afd   Thumb Code    20  sys.o(i.SysTick_Handler)
+    SystemInit                               0x08000b11   Thumb Code    64  system_stm32f10x.o(i.SystemInit)
+    USART1_IRQHandler                        0x08000b61   Thumb Code    88  usart.o(i.USART1_IRQHandler)
+    USART_Cmd                                0x08000bc5   Thumb Code    20  stm32f10x_usart.o(i.USART_Cmd)
+    USART_GetITStatus                        0x08000bd9   Thumb Code    62  stm32f10x_usart.o(i.USART_GetITStatus)
+    USART_ITConfig                           0x08000c17   Thumb Code    48  stm32f10x_usart.o(i.USART_ITConfig)
+    USART_Init                               0x08000c49   Thumb Code   166  stm32f10x_usart.o(i.USART_Init)
+    USART_ReceiveData                        0x08000cf5   Thumb Code     8  stm32f10x_usart.o(i.USART_ReceiveData)
+    UsageFault_Handler                       0x08000cfd   Thumb Code     2  stm32f10x_it.o(i.UsageFault_Handler)
+    _sys_exit                                0x08000cff   Thumb Code     2  usart.o(i._sys_exit)
+    fputc                                    0x08000d01   Thumb Code    18  usart.o(i.fputc)
+    main                                     0x08000d19   Thumb Code    14  main.o(i.main)
+    pvPortMalloc                             0x0800158d   Thumb Code   214  heap_4.o(i.pvPortMalloc)
+    pvTaskIncrementMutexHeldCount            0x080016a1   Thumb Code    18  tasks.o(i.pvTaskIncrementMutexHeldCount)
+    pxPortInitialiseStack                    0x080016b9   Thumb Code    32  port.o(i.pxPortInitialiseStack)
+    start_task                               0x080016dd   Thumb Code    26  init_task.o(i.start_task)
+    uart_init                                0x080016fd   Thumb Code   152  usart.o(i.uart_init)
+    uxListRemove                             0x0800179d   Thumb Code    36  list.o(i.uxListRemove)
+    vListInitialise                          0x080017c1   Thumb Code    22  list.o(i.vListInitialise)
+    vListInitialiseItem                      0x080017d7   Thumb Code     6  list.o(i.vListInitialiseItem)
+    vListInsert                              0x080017dd   Thumb Code    48  list.o(i.vListInsert)
+    vListInsertEnd                           0x0800180d   Thumb Code    24  list.o(i.vListInsertEnd)
+    vPortEnterCritical                       0x08001825   Thumb Code    50  port.o(i.vPortEnterCritical)
+    vPortExitCritical                        0x0800189d   Thumb Code    34  port.o(i.vPortExitCritical)
+    vPortFree                                0x08001901   Thumb Code    94  heap_4.o(i.vPortFree)
+    vPortSetupTimerInterrupt                 0x0800199d   Thumb Code    26  port.o(i.vPortSetupTimerInterrupt)
+    vPortValidateInterruptPriority           0x080019bd   Thumb Code    70  port.o(i.vPortValidateInterruptPriority)
+    vQueueAddToRegistry                      0x08001a49   Thumb Code    32  queue.o(i.vQueueAddToRegistry)
+    vQueueWaitForMessageRestricted           0x08001a6d   Thumb Code    68  queue.o(i.vQueueWaitForMessageRestricted)
+    vTaskDelay                               0x08001ab1   Thumb Code    62  tasks.o(i.vTaskDelay)
+    vTaskDelete                              0x08001b1d   Thumb Code   152  tasks.o(i.vTaskDelete)
+    vTaskMissedYield                         0x08001be9   Thumb Code     8  tasks.o(i.vTaskMissedYield)
+    vTaskPlaceOnEventList                    0x08001bf5   Thumb Code    44  tasks.o(i.vTaskPlaceOnEventList)
+    vTaskPlaceOnEventListRestricted          0x08001c49   Thumb Code    52  tasks.o(i.vTaskPlaceOnEventListRestricted)
+    vTaskPriorityInherit                     0x08001ca5   Thumb Code   124  tasks.o(i.vTaskPriorityInherit)
+    vTaskSetTimeOutState                     0x08001d29   Thumb Code    30  tasks.o(i.vTaskSetTimeOutState)
+    vTaskStartScheduler                      0x08001d71   Thumb Code    96  tasks.o(i.vTaskStartScheduler)
+    vTaskSuspendAll                          0x08001e05   Thumb Code    10  tasks.o(i.vTaskSuspendAll)
+    vTaskSwitchContext                       0x08001e15   Thumb Code    80  tasks.o(i.vTaskSwitchContext)
+    xPortStartScheduler                      0x08001e91   Thumb Code   108  port.o(i.xPortStartScheduler)
+    xPortSysTickHandler                      0x08001f09   Thumb Code    38  port.o(i.xPortSysTickHandler)
+    xQueueGenericCreate                      0x08001f35   Thumb Code    82  queue.o(i.xQueueGenericCreate)
+    xQueueGenericReceive                     0x08001fad   Thumb Code   348  queue.o(i.xQueueGenericReceive)
+    xQueueGenericReset                       0x08002131   Thumb Code   128  queue.o(i.xQueueGenericReset)
+    xQueueGenericSend                        0x080021d9   Thumb Code   350  queue.o(i.xQueueGenericSend)
+    xQueueGenericSendFromISR                 0x08002361   Thumb Code   188  queue.o(i.xQueueGenericSendFromISR)
+    xTaskCheckForTimeOut                     0x08002441   Thumb Code    94  tasks.o(i.xTaskCheckForTimeOut)
+    xTaskCreate                              0x080024c9   Thumb Code    86  tasks.o(i.xTaskCreate)
+    xTaskGetSchedulerState                   0x08002521   Thumb Code    22  tasks.o(i.xTaskGetSchedulerState)
+    xTaskGetTickCount                        0x0800253d   Thumb Code     6  tasks.o(i.xTaskGetTickCount)
+    xTaskIncrementTick                       0x08002549   Thumb Code   188  tasks.o(i.xTaskIncrementTick)
+    xTaskPriorityDisinherit                  0x08002631   Thumb Code   136  tasks.o(i.xTaskPriorityDisinherit)
+    xTaskRemoveFromEventList                 0x080026e5   Thumb Code   102  tasks.o(i.xTaskRemoveFromEventList)
+    xTaskResumeAll                           0x0800277d   Thumb Code   180  tasks.o(i.xTaskResumeAll)
+    xTimerCreate                             0x08002861   Thumb Code    74  timers.o(i.xTimerCreate)
+    xTimerCreateTimerTask                    0x080028d5   Thumb Code    58  timers.o(i.xTimerCreateTimerTask)
+    xTimerGenericCommand                     0x08002949   Thumb Code    98  timers.o(i.xTimerGenericCommand)
+    Region$$Table$$Base                      0x080029d8   Number         0  anon$$obj.o(Region$$Table)
+    Region$$Table$$Limit                     0x080029f8   Number         0  anon$$obj.o(Region$$Table)
+    SystemCoreClock                          0x20000000   Data           4  system_stm32f10x.o(.data)
+    AHBPrescTable                            0x20000004   Data          16  system_stm32f10x.o(.data)
+    StartTask_Handler                        0x20000014   Data           4  init_task.o(.data)
+    LED0Task_Handler                         0x20000018   Data           4  led_task.o(.data)
+    LED1Task_Handler                         0x2000001c   Data           4  led_task.o(.data)
+    USART_RX_STA                             0x20000020   Data           2  usart.o(.data)
+    __stdout                                 0x20000024   Data           4  usart.o(.data)
+    pxCurrentTCB                             0x2000003c   Data           4  tasks.o(.data)
+    USART_RX_BUF                             0x200000b0   Data         200  usart.o(.bss)
+    xQueueRegistry                           0x20000178   Data          64  queue.o(.bss)
+    __libspace_start                         0x200054c4   Data          96  libspace.o(.bss)
+    __temporary_stack_top$libspace           0x20005524   Data           0  libspace.o(.bss)
+
+
+
+==============================================================================
+
+Memory Map of the image
+
+  Image Entry point : 0x08000275
+
+  Load Region LR_1 (Base: 0x08000000, Size: 0x00002aa8, Max: 0xffffffff, ABSOLUTE)
+
+    Execution Region ER_RO (Exec base: 0x08000000, Load base: 0x08000000, Size: 0x000029f8, Max: 0xffffffff, ABSOLUTE)
+
+    Exec Addr    Load Addr    Size         Type   Attr      Idx    E Section Name        Object
+
+    0x08000000   0x08000000   0x00000130   Data   RO          424    RESET               startup_stm32f10x_hd.o
+    0x08000130   0x08000130   0x00000008   Code   RO         4403  * !!!main             c_w.l(__main.o)
+    0x08000138   0x08000138   0x00000034   Code   RO         4583    !!!scatter          c_w.l(__scatter.o)
+    0x0800016c   0x0800016c   0x0000001a   Code   RO         4585    !!handler_copy      c_w.l(__scatter_copy.o)
+    0x08000186   0x08000186   0x00000002   PAD
+    0x08000188   0x08000188   0x0000001c   Code   RO         4587    !!handler_zi        c_w.l(__scatter_zi.o)
+    0x080001a4   0x080001a4   0x00000000   Code   RO         4392    .ARM.Collect$$_printf_percent$$00000000  c_w.l(_printf_percent.o)
+    0x080001a4   0x080001a4   0x00000006   Code   RO         4390    .ARM.Collect$$_printf_percent$$00000009  c_w.l(_printf_d.o)
+    0x080001aa   0x080001aa   0x00000006   Code   RO         4389    .ARM.Collect$$_printf_percent$$00000014  c_w.l(_printf_s.o)
+    0x080001b0   0x080001b0   0x00000004   Code   RO         4418    .ARM.Collect$$_printf_percent$$00000017  c_w.l(_printf_percent_end.o)
+    0x080001b4   0x080001b4   0x00000002   Code   RO         4455    .ARM.Collect$$libinit$$00000000  c_w.l(libinit.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4462    .ARM.Collect$$libinit$$00000002  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4464    .ARM.Collect$$libinit$$00000004  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4467    .ARM.Collect$$libinit$$0000000A  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4469    .ARM.Collect$$libinit$$0000000C  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4471    .ARM.Collect$$libinit$$0000000E  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4474    .ARM.Collect$$libinit$$00000011  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4476    .ARM.Collect$$libinit$$00000013  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4478    .ARM.Collect$$libinit$$00000015  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4480    .ARM.Collect$$libinit$$00000017  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4482    .ARM.Collect$$libinit$$00000019  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4484    .ARM.Collect$$libinit$$0000001B  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4486    .ARM.Collect$$libinit$$0000001D  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4488    .ARM.Collect$$libinit$$0000001F  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4490    .ARM.Collect$$libinit$$00000021  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4492    .ARM.Collect$$libinit$$00000023  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4494    .ARM.Collect$$libinit$$00000025  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4498    .ARM.Collect$$libinit$$0000002C  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4500    .ARM.Collect$$libinit$$0000002E  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4502    .ARM.Collect$$libinit$$00000030  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000000   Code   RO         4504    .ARM.Collect$$libinit$$00000032  c_w.l(libinit2.o)
+    0x080001b6   0x080001b6   0x00000002   Code   RO         4505    .ARM.Collect$$libinit$$00000033  c_w.l(libinit2.o)
+    0x080001b8   0x080001b8   0x00000002   Code   RO         4523    .ARM.Collect$$libshutdown$$00000000  c_w.l(libshutdown.o)
+    0x080001ba   0x080001ba   0x00000000   Code   RO         4533    .ARM.Collect$$libshutdown$$00000002  c_w.l(libshutdown2.o)
+    0x080001ba   0x080001ba   0x00000000   Code   RO         4535    .ARM.Collect$$libshutdown$$00000004  c_w.l(libshutdown2.o)
+    0x080001ba   0x080001ba   0x00000000   Code   RO         4537    .ARM.Collect$$libshutdown$$00000006  c_w.l(libshutdown2.o)
+    0x080001ba   0x080001ba   0x00000000   Code   RO         4540    .ARM.Collect$$libshutdown$$00000009  c_w.l(libshutdown2.o)
+    0x080001ba   0x080001ba   0x00000000   Code   RO         4543    .ARM.Collect$$libshutdown$$0000000C  c_w.l(libshutdown2.o)
+    0x080001ba   0x080001ba   0x00000000   Code   RO         4545    .ARM.Collect$$libshutdown$$0000000E  c_w.l(libshutdown2.o)
+    0x080001ba   0x080001ba   0x00000000   Code   RO         4548    .ARM.Collect$$libshutdown$$00000011  c_w.l(libshutdown2.o)
+    0x080001ba   0x080001ba   0x00000002   Code   RO         4549    .ARM.Collect$$libshutdown$$00000012  c_w.l(libshutdown2.o)
+    0x080001bc   0x080001bc   0x00000000   Code   RO         4407    .ARM.Collect$$rtentry$$00000000  c_w.l(__rtentry.o)
+    0x080001bc   0x080001bc   0x00000000   Code   RO         4424    .ARM.Collect$$rtentry$$00000002  c_w.l(__rtentry2.o)
+    0x080001bc   0x080001bc   0x00000006   Code   RO         4436    .ARM.Collect$$rtentry$$00000004  c_w.l(__rtentry4.o)
+    0x080001c2   0x080001c2   0x00000000   Code   RO         4426    .ARM.Collect$$rtentry$$00000009  c_w.l(__rtentry2.o)
+    0x080001c2   0x080001c2   0x00000004   Code   RO         4427    .ARM.Collect$$rtentry$$0000000A  c_w.l(__rtentry2.o)
+    0x080001c6   0x080001c6   0x00000000   Code   RO         4429    .ARM.Collect$$rtentry$$0000000C  c_w.l(__rtentry2.o)
+    0x080001c6   0x080001c6   0x00000008   Code   RO         4430    .ARM.Collect$$rtentry$$0000000D  c_w.l(__rtentry2.o)
+    0x080001ce   0x080001ce   0x00000002   Code   RO         4459    .ARM.Collect$$rtexit$$00000000  c_w.l(rtexit.o)
+    0x080001d0   0x080001d0   0x00000000   Code   RO         4507    .ARM.Collect$$rtexit$$00000002  c_w.l(rtexit2.o)
+    0x080001d0   0x080001d0   0x00000004   Code   RO         4508    .ARM.Collect$$rtexit$$00000003  c_w.l(rtexit2.o)
+    0x080001d4   0x080001d4   0x00000006   Code   RO         4509    .ARM.Collect$$rtexit$$00000004  c_w.l(rtexit2.o)
+    0x080001da   0x080001da   0x00000002   PAD
+    0x080001dc   0x080001dc   0x00000096   Code   RO         4273    .emb_text           port.o
+    0x08000272   0x08000272   0x00000002   PAD
+    0x08000274   0x08000274   0x00000040   Code   RO          425  * .text               startup_stm32f10x_hd.o
+    0x080002b4   0x080002b4   0x00000002   Code   RO         4352    .text               c_w.l(use_no_semi_2.o)
+    0x080002b6   0x080002b6   0x00000002   PAD
+    0x080002b8   0x080002b8   0x00000018   Code   RO         4358    .text               c_w.l(noretval__2printf.o)
+    0x080002d0   0x080002d0   0x00000068   Code   RO         4362    .text               c_w.l(__printf.o)
+    0x08000338   0x08000338   0x00000052   Code   RO         4364    .text               c_w.l(_printf_str.o)
+    0x0800038a   0x0800038a   0x00000002   PAD
+    0x0800038c   0x0800038c   0x00000078   Code   RO         4366    .text               c_w.l(_printf_dec.o)
+    0x08000404   0x08000404   0x0000008a   Code   RO         4397    .text               c_w.l(rt_memcpy_v6.o)
+    0x0800048e   0x0800048e   0x00000010   Code   RO         4399    .text               c_w.l(aeabi_memset.o)
+    0x0800049e   0x0800049e   0x00000006   Code   RO         4401    .text               c_w.l(heapauxi.o)
+    0x080004a4   0x080004a4   0x00000002   Code   RO         4405    .text               c_w.l(use_no_semi.o)
+    0x080004a6   0x080004a6   0x000000b2   Code   RO         4408    .text               c_w.l(_printf_intcommon.o)
+    0x08000558   0x08000558   0x00000030   Code   RO         4410    .text               c_w.l(_printf_char_common.o)
+    0x08000588   0x08000588   0x0000002c   Code   RO         4414    .text               c_w.l(_printf_char.o)
+    0x080005b4   0x080005b4   0x00000024   Code   RO         4416    .text               c_w.l(_printf_char_file.o)
+    0x080005d8   0x080005d8   0x00000064   Code   RO         4419    .text               c_w.l(rt_memcpy_w.o)
+    0x0800063c   0x0800063c   0x00000044   Code   RO         4421    .text               c_w.l(rt_memclr.o)
+    0x08000680   0x08000680   0x00000008   Code   RO         4440    .text               c_w.l(ferror.o)
+    0x08000688   0x08000688   0x0000004e   Code   RO         4444    .text               c_w.l(rt_memclr_w.o)
+    0x080006d6   0x080006d6   0x0000004a   Code   RO         4446    .text               c_w.l(sys_stackheap_outer.o)
+    0x08000720   0x08000720   0x00000012   Code   RO         4448    .text               c_w.l(exit.o)
+    0x08000732   0x08000732   0x00000002   PAD
+    0x08000734   0x08000734   0x00000008   Code   RO         4456    .text               c_w.l(libspace.o)
+    0x0800073c   0x0800073c   0x00000002   Code   RO          157    i.BusFault_Handler  stm32f10x_it.o
+    0x0800073e   0x0800073e   0x00000002   Code   RO          158    i.DebugMon_Handler  stm32f10x_it.o
+    0x08000740   0x08000740   0x0000009c   Code   RO          471    i.GPIO_Init         stm32f10x_gpio.o
+    0x080007dc   0x080007dc   0x00000004   Code   RO          479    i.GPIO_SetBits      stm32f10x_gpio.o
+    0x080007e0   0x080007e0   0x00000002   Code   RO          159    i.HardFault_Handler  stm32f10x_it.o
+    0x080007e2   0x080007e2   0x0000001a   Code   RO            1    i.Init              main.o
+    0x080007fc   0x080007fc   0x00000034   Code   RO          257    i.Init_task         init_task.o
+    0x08000830   0x08000830   0x00000024   Code   RO          284    i.LED0_task         led_task.o
+    0x08000854   0x08000854   0x00000028   Code   RO          285    i.LED1_task         led_task.o
+    0x0800087c   0x0800087c   0x00000060   Code   RO          311    i.LED_Init          led.o
+    0x080008dc   0x080008dc   0x00000050   Code   RO          286    i.LED_task_Create   led_task.o
+    0x0800092c   0x0800092c   0x00000002   Code   RO          160    i.MemManage_Handler  stm32f10x_it.o
+    0x0800092e   0x0800092e   0x00000002   Code   RO          161    i.NMI_Handler       stm32f10x_it.o
+    0x08000930   0x08000930   0x00000064   Code   RO          429    i.NVIC_Init         misc.o
+    0x08000994   0x08000994   0x00000014   Code   RO          430    i.NVIC_PriorityGroupConfig  misc.o
+    0x080009a8   0x080009a8   0x00000018   Code   RO          607    i.RCC_APB2PeriphClockCmd  stm32f10x_rcc.o
+    0x080009c0   0x080009c0   0x00000094   Code   RO          615    i.RCC_GetClocksFreq  stm32f10x_rcc.o
+    0x08000a54   0x08000a54   0x000000a8   Code   RO          228    i.SetSysClockTo72   system_stm32f10x.o
+    0x08000afc   0x08000afc   0x00000014   Code   RO          324    i.SysTick_Handler   sys.o
+    0x08000b10   0x08000b10   0x00000050   Code   RO          230    i.SystemInit        system_stm32f10x.o
+    0x08000b60   0x08000b60   0x00000064   Code   RO          366    i.USART1_IRQHandler  usart.o
+    0x08000bc4   0x08000bc4   0x00000014   Code   RO          807    i.USART_Cmd         stm32f10x_usart.o
+    0x08000bd8   0x08000bd8   0x0000003e   Code   RO          811    i.USART_GetITStatus  stm32f10x_usart.o
+    0x08000c16   0x08000c16   0x00000030   Code   RO          813    i.USART_ITConfig    stm32f10x_usart.o
+    0x08000c46   0x08000c46   0x00000002   PAD
+    0x08000c48   0x08000c48   0x000000ac   Code   RO          814    i.USART_Init        stm32f10x_usart.o
+    0x08000cf4   0x08000cf4   0x00000008   Code   RO          821    i.USART_ReceiveData  stm32f10x_usart.o
+    0x08000cfc   0x08000cfc   0x00000002   Code   RO          162    i.UsageFault_Handler  stm32f10x_it.o
+    0x08000cfe   0x08000cfe   0x00000002   Code   RO          367    i._sys_exit         usart.o
+    0x08000d00   0x08000d00   0x00000018   Code   RO          368    i.fputc             usart.o
+    0x08000d18   0x08000d18   0x0000000e   Code   RO            2    i.main              main.o
+    0x08000d26   0x08000d26   0x00000002   PAD
+    0x08000d28   0x08000d28   0x00000070   Code   RO         3759    i.prvAddCurrentTaskToDelayedList  tasks.o
+    0x08000d98   0x08000d98   0x000000d0   Code   RO         3760    i.prvAddNewTaskToReadyList  tasks.o
+    0x08000e68   0x08000e68   0x00000050   Code   RO         4104    i.prvCheckForValidListAndQueue  timers.o
+    0x08000eb8   0x08000eb8   0x00000054   Code   RO         3761    i.prvCheckTasksWaitingTermination  tasks.o
+    0x08000f0c   0x08000f0c   0x00000026   Code   RO         3538    i.prvCopyDataFromQueue  queue.o
+    0x08000f32   0x08000f32   0x0000006c   Code   RO         3539    i.prvCopyDataToQueue  queue.o
+    0x08000f9e   0x08000f9e   0x00000014   Code   RO         3762    i.prvDeleteTCB      tasks.o
+    0x08000fb2   0x08000fb2   0x00000002   PAD
+    0x08000fb4   0x08000fb4   0x0000004c   Code   RO         4224    i.prvHeapInit       heap_4.o
+    0x08001000   0x08001000   0x00000028   Code   RO         3763    i.prvIdleTask       tasks.o
+    0x08001028   0x08001028   0x000000c0   Code   RO         3764    i.prvInitialiseNewTask  tasks.o
+    0x080010e8   0x080010e8   0x0000004c   Code   RO         4225    i.prvInsertBlockIntoFreeList  heap_4.o
+    0x08001134   0x08001134   0x00000038   Code   RO         4105    i.prvInsertTimerInActiveList  timers.o
+    0x0800116c   0x0800116c   0x0000001a   Code   RO         3540    i.prvIsQueueEmpty   queue.o
+    0x08001186   0x08001186   0x00000002   PAD
+    0x08001188   0x08001188   0x00000090   Code   RO         3541    i.prvNotifyQueueSetContainer  queue.o
+    0x08001218   0x08001218   0x00000060   Code   RO         4106    i.prvProcessExpiredTimer  timers.o
+    0x08001278   0x08001278   0x000000f0   Code   RO         4107    i.prvProcessReceivedCommands  timers.o
+    0x08001368   0x08001368   0x0000006c   Code   RO         4108    i.prvProcessTimerOrBlockTask  timers.o
+    0x080013d4   0x080013d4   0x00000020   Code   RO         3766    i.prvResetNextTaskUnblockTime  tasks.o
+    0x080013f4   0x080013f4   0x00000028   Code   RO         4109    i.prvSampleTimeNow  timers.o
+    0x0800141c   0x0800141c   0x0000006c   Code   RO         4110    i.prvSwitchTimerLists  timers.o
+    0x08001488   0x08001488   0x00000064   Code   RO         4274    i.prvTaskExitError  port.o
+    0x080014ec   0x080014ec   0x00000028   Code   RO         4111    i.prvTimerTask      timers.o
+    0x08001514   0x08001514   0x00000078   Code   RO         3542    i.prvUnlockQueue    queue.o
+    0x0800158c   0x0800158c   0x00000114   Code   RO         4226    i.pvPortMalloc      heap_4.o
+    0x080016a0   0x080016a0   0x00000018   Code   RO         3768    i.pvTaskIncrementMutexHeldCount  tasks.o
+    0x080016b8   0x080016b8   0x00000024   Code   RO         4275    i.pxPortInitialiseStack  port.o
+    0x080016dc   0x080016dc   0x00000020   Code   RO          258    i.start_task        init_task.o
+    0x080016fc   0x080016fc   0x000000a0   Code   RO          369    i.uart_init         usart.o
+    0x0800179c   0x0800179c   0x00000024   Code   RO         3501    i.uxListRemove      list.o
+    0x080017c0   0x080017c0   0x00000016   Code   RO         3502    i.vListInitialise   list.o
+    0x080017d6   0x080017d6   0x00000006   Code   RO         3503    i.vListInitialiseItem  list.o
+    0x080017dc   0x080017dc   0x00000030   Code   RO         3504    i.vListInsert       list.o
+    0x0800180c   0x0800180c   0x00000018   Code   RO         3505    i.vListInsertEnd    list.o
+    0x08001824   0x08001824   0x00000078   Code   RO         4277    i.vPortEnterCritical  port.o
+    0x0800189c   0x0800189c   0x00000064   Code   RO         4278    i.vPortExitCritical  port.o
+    0x08001900   0x08001900   0x0000009c   Code   RO         4227    i.vPortFree         heap_4.o
+    0x0800199c   0x0800199c   0x00000020   Code   RO         4279    i.vPortSetupTimerInterrupt  port.o
+    0x080019bc   0x080019bc   0x0000008c   Code   RO         4280    i.vPortValidateInterruptPriority  port.o
+    0x08001a48   0x08001a48   0x00000024   Code   RO         3548    i.vQueueAddToRegistry  queue.o
+    0x08001a6c   0x08001a6c   0x00000044   Code   RO         3552    i.vQueueWaitForMessageRestricted  queue.o
+    0x08001ab0   0x08001ab0   0x0000006c   Code   RO         3776    i.vTaskDelay        tasks.o
+    0x08001b1c   0x08001b1c   0x000000cc   Code   RO         3778    i.vTaskDelete       tasks.o
+    0x08001be8   0x08001be8   0x0000000c   Code   RO         3782    i.vTaskMissedYield  tasks.o
+    0x08001bf4   0x08001bf4   0x00000054   Code   RO         3784    i.vTaskPlaceOnEventList  tasks.o
+    0x08001c48   0x08001c48   0x0000005c   Code   RO         3785    i.vTaskPlaceOnEventListRestricted  tasks.o
+    0x08001ca4   0x08001ca4   0x00000084   Code   RO         3787    i.vTaskPriorityInherit  tasks.o
+    0x08001d28   0x08001d28   0x00000048   Code   RO         3791    i.vTaskSetTimeOutState  tasks.o
+    0x08001d70   0x08001d70   0x00000094   Code   RO         3792    i.vTaskStartScheduler  tasks.o
+    0x08001e04   0x08001e04   0x00000010   Code   RO         3794    i.vTaskSuspendAll   tasks.o
+    0x08001e14   0x08001e14   0x0000007c   Code   RO         3795    i.vTaskSwitchContext  tasks.o
+    0x08001e90   0x08001e90   0x00000078   Code   RO         4281    i.xPortStartScheduler  port.o
+    0x08001f08   0x08001f08   0x0000002c   Code   RO         4282    i.xPortSysTickHandler  port.o
+    0x08001f34   0x08001f34   0x00000078   Code   RO         3557    i.xQueueGenericCreate  queue.o
+    0x08001fac   0x08001fac   0x00000184   Code   RO         3558    i.xQueueGenericReceive  queue.o
+    0x08002130   0x08002130   0x000000a8   Code   RO         3559    i.xQueueGenericReset  queue.o
+    0x080021d8   0x080021d8   0x00000188   Code   RO         3560    i.xQueueGenericSend  queue.o
+    0x08002360   0x08002360   0x000000e0   Code   RO         3561    i.xQueueGenericSendFromISR  queue.o
+    0x08002440   0x08002440   0x00000088   Code   RO         3796    i.xTaskCheckForTimeOut  tasks.o
+    0x080024c8   0x080024c8   0x00000056   Code   RO         3797    i.xTaskCreate       tasks.o
+    0x0800251e   0x0800251e   0x00000002   PAD
+    0x08002520   0x08002520   0x0000001c   Code   RO         3801    i.xTaskGetSchedulerState  tasks.o
+    0x0800253c   0x0800253c   0x0000000c   Code   RO         3802    i.xTaskGetTickCount  tasks.o
+    0x08002548   0x08002548   0x000000e8   Code   RO         3804    i.xTaskIncrementTick  tasks.o
+    0x08002630   0x08002630   0x000000b4   Code   RO         3807    i.xTaskPriorityDisinherit  tasks.o
+    0x080026e4   0x080026e4   0x00000098   Code   RO         3808    i.xTaskRemoveFromEventList  tasks.o
+    0x0800277c   0x0800277c   0x000000e4   Code   RO         3810    i.xTaskResumeAll    tasks.o
+    0x08002860   0x08002860   0x00000074   Code   RO         4114    i.xTimerCreate      timers.o
+    0x080028d4   0x080028d4   0x00000074   Code   RO         4115    i.xTimerCreateTimerTask  timers.o
+    0x08002948   0x08002948   0x00000090   Code   RO         4116    i.xTimerGenericCommand  timers.o
+    0x080029d8   0x080029d8   0x00000020   Data   RO         4581    Region$$Table       anon$$obj.o
+
+
+    Execution Region ER_RW (Exec base: 0x20000000, Load base: 0x080029f8, Size: 0x000000b0, Max: 0xffffffff, ABSOLUTE)
+
+    Exec Addr    Load Addr    Size         Type   Attr      Idx    E Section Name        Object
+
+    0x20000000   0x080029f8   0x00000014   Data   RW          231    .data               system_stm32f10x.o
+    0x20000014   0x08002a0c   0x00000004   Data   RW          259    .data               init_task.o
+    0x20000018   0x08002a10   0x00000008   Data   RW          287    .data               led_task.o
+    0x20000020   0x08002a18   0x00000002   Data   RW          371    .data               usart.o
+    0x20000022   0x08002a1a   0x00000002   PAD
+    0x20000024   0x08002a1c   0x00000004   Data   RW          372    .data               usart.o
+    0x20000028   0x08002a20   0x00000014   Data   RW          635    .data               stm32f10x_rcc.o
+    0x2000003c   0x08002a34   0x0000003c   Data   RW         3813    .data               tasks.o
+    0x20000078   0x08002a70   0x00000014   Data   RW         4124    .data               timers.o
+    0x2000008c   0x08002a84   0x00000018   Data   RW         4232    .data               heap_4.o
+    0x200000a4   0x08002a9c   0x0000000c   Data   RW         4283    .data               port.o
+
+
+    Execution Region ER_ZI (Exec base: 0x200000b0, Load base: 0x08002aa8, Size: 0x00005a78, Max: 0xffffffff, ABSOLUTE)
+
+    Exec Addr    Load Addr    Size         Type   Attr      Idx    E Section Name        Object
+
+    0x200000b0        -       0x000000c8   Zero   RW          370    .bss                usart.o
+    0x20000178        -       0x00000040   Zero   RW         3572    .bss                queue.o
+    0x200001b8        -       0x000002e4   Zero   RW         3812    .bss                tasks.o
+    0x2000049c        -       0x00000028   Zero   RW         4123    .bss                timers.o
+    0x200004c4        -       0x00005000   Zero   RW         4231    .bss                heap_4.o
+    0x200054c4        -       0x00000060   Zero   RW         4457    .bss                c_w.l(libspace.o)
+    0x20005524   0x08002aa8   0x00000004   PAD
+    0x20005528        -       0x00000200   Zero   RW          423    HEAP                startup_stm32f10x_hd.o
+    0x20005728        -       0x00000400   Zero   RW          422    STACK               startup_stm32f10x_hd.o
+
+
+==============================================================================
+
+Image component sizes
+
+
+      Code (inc. data)   RO Data    RW Data    ZI Data      Debug   Object Name
+
+         0          0          0          0          0         32   core_cm3.o
+         0          0          0          0          0      11856   event_groups.o
+       584        138          0         24      20480       4087   heap_4.o
+        84         28          0          4          0       1317   init_task.o
+        96         10          0          0          0        543   led.o
+       156         44          0          8          0       1838   led_task.o
+       136          0          0          0          0       3106   list.o
+        40          0          0          0          0     243778   main.o
+       120         16          0          0          0       1595   misc.o
+       842        312          0         12          0      10269   port.o
+      1832        236          0          0         64      15661   queue.o
+        64         26        304          0       1536        808   startup_stm32f10x_hd.o
+       160          0          0          0          0       2603   stm32f10x_gpio.o
+        12          0          0          0          0       2569   stm32f10x_it.o
+       172         22          0         20          0       3993   stm32f10x_rcc.o
+       310          6          0          0          0       5294   stm32f10x_usart.o
+        20          0          0          0          0        502   sys.o
+       248         24          0         20          0       1793   system_stm32f10x.o
+      2758        670          0         60        740      29387   tasks.o
+      1144        260          0         20         40       9810   timers.o
+       286         26          0          6        200       4272   usart.o
+
+    ----------------------------------------------------------------------
+      9076       1818        336        176      23060     355113   Object Totals
+         0          0         32          0          0          0   (incl. Generated)
+        12          0          0          2          0          0   (incl. Padding)
+
+    ----------------------------------------------------------------------
+
+      Code (inc. data)   RO Data    RW Data    ZI Data      Debug   Library Member Name
+
+         8          0          0          0          0         68   __main.o
+       104          0          0          0          0         84   __printf.o
+         0          0          0          0          0          0   __rtentry.o
+        12          0          0          0          0          0   __rtentry2.o
+         6          0          0          0          0          0   __rtentry4.o
+        52          8          0          0          0          0   __scatter.o
+        26          0          0          0          0          0   __scatter_copy.o
+        28          0          0          0          0          0   __scatter_zi.o
+        44          0          0          0          0        108   _printf_char.o
+        48          6          0          0          0         96   _printf_char_common.o
+        36          4          0          0          0         80   _printf_char_file.o
+         6          0          0          0          0          0   _printf_d.o
+       120         16          0          0          0         92   _printf_dec.o
+       178          0          0          0          0         88   _printf_intcommon.o
+         0          0          0          0          0          0   _printf_percent.o
+         4          0          0          0          0          0   _printf_percent_end.o
+         6          0          0          0          0          0   _printf_s.o
+        82          0          0          0          0         80   _printf_str.o
+        16          0          0          0          0         68   aeabi_memset.o
+        18          0          0          0          0         80   exit.o
+         8          0          0          0          0         68   ferror.o
+         6          0          0          0          0        152   heapauxi.o
+         2          0          0          0          0          0   libinit.o
+         2          0          0          0          0          0   libinit2.o
+         2          0          0          0          0          0   libshutdown.o
+         2          0          0          0          0          0   libshutdown2.o
+         8          4          0          0         96         68   libspace.o
+        24          4          0          0          0         84   noretval__2printf.o
+        68          0          0          0          0         68   rt_memclr.o
+        78          0          0          0          0         80   rt_memclr_w.o
+       138          0          0          0          0         68   rt_memcpy_v6.o
+       100          0          0          0          0         80   rt_memcpy_w.o
+         2          0          0          0          0          0   rtexit.o
+        10          0          0          0          0          0   rtexit2.o
+        74          0          0          0          0         80   sys_stackheap_outer.o
+         2          0          0          0          0         68   use_no_semi.o
+         2          0          0          0          0         68   use_no_semi_2.o
+
+    ----------------------------------------------------------------------
+      1332         42          0          0        100       1728   Library Totals
+        10          0          0          0          4          0   (incl. Padding)
+
+    ----------------------------------------------------------------------
+
+      Code (inc. data)   RO Data    RW Data    ZI Data      Debug   Library Name
+
+      1322         42          0          0         96       1728   c_w.l
+
+    ----------------------------------------------------------------------
+      1332         42          0          0        100       1728   Library Totals
+
+    ----------------------------------------------------------------------
+
+==============================================================================
+
+
+      Code (inc. data)   RO Data    RW Data    ZI Data      Debug   
+
+     10408       1860        336        176      23160     351065   Grand Totals
+     10408       1860        336        176      23160     351065   ELF Image Totals
+     10408       1860        336        176          0          0   ROM Totals
+
+==============================================================================
+
+    Total RO  Size (Code + RO Data)                10744 (  10.49kB)
+    Total RW  Size (RW Data + ZI Data)             23336 (  22.79kB)
+    Total ROM Size (Code + RO Data + RW Data)      10920 (  10.66kB)
+
+==============================================================================
+
diff --git a/Program/XLLC/OBJ/core_cm3.crf b/Program/XLLC/OBJ/core_cm3.crf
new file mode 100644
index 0000000000000000000000000000000000000000..9e05c19dc2fef992eb5c9d8b9451a142ac7d4266
Binary files /dev/null and b/Program/XLLC/OBJ/core_cm3.crf differ
diff --git a/Program/XLLC/OBJ/core_cm3.d b/Program/XLLC/OBJ/core_cm3.d
new file mode 100644
index 0000000000000000000000000000000000000000..43207102cfc55cbcca84f1158d36d609b00f8578
--- /dev/null
+++ b/Program/XLLC/OBJ/core_cm3.d
@@ -0,0 +1,2 @@
+..\obj\core_cm3.o: ..\CORE\core_cm3.c
+..\obj\core_cm3.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
diff --git a/Program/XLLC/OBJ/core_cm3.o b/Program/XLLC/OBJ/core_cm3.o
new file mode 100644
index 0000000000000000000000000000000000000000..970bd17771db9d12f72b058a58dffb316686468c
Binary files /dev/null and b/Program/XLLC/OBJ/core_cm3.o differ
diff --git a/Program/XLLC/OBJ/croutine.crf b/Program/XLLC/OBJ/croutine.crf
new file mode 100644
index 0000000000000000000000000000000000000000..8427ae5a383a89ce80e46415ccb8988a9b7c8132
Binary files /dev/null and b/Program/XLLC/OBJ/croutine.crf differ
diff --git a/Program/XLLC/OBJ/croutine.d b/Program/XLLC/OBJ/croutine.d
new file mode 100644
index 0000000000000000000000000000000000000000..61bb95ba229704f16898a70e9be617838138167e
--- /dev/null
+++ b/Program/XLLC/OBJ/croutine.d
@@ -0,0 +1,45 @@
+..\obj\croutine.o: ..\FreeRTOS\croutine.c
+..\obj\croutine.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\croutine.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\croutine.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\croutine.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\croutine.o: ..\SYSTEM\sys\sys.h
+..\obj\croutine.o: ..\USER\stm32f10x.h
+..\obj\croutine.o: ..\CORE\core_cm3.h
+..\obj\croutine.o: ..\USER\system_stm32f10x.h
+..\obj\croutine.o: ..\USER\stm32f10x_conf.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\croutine.o: ..\USER\stm32f10x.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\croutine.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\croutine.o: ..\SYSTEM\usart\usart.h
+..\obj\croutine.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\croutine.o: ..\FreeRTOS\include\projdefs.h
+..\obj\croutine.o: ..\FreeRTOS\include\portable.h
+..\obj\croutine.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\croutine.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\croutine.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\croutine.o: ..\FreeRTOS\include\task.h
+..\obj\croutine.o: ..\FreeRTOS\include\list.h
+..\obj\croutine.o: ..\FreeRTOS\include\croutine.h
+..\obj\croutine.o: ..\FreeRTOS\include\list.h
diff --git a/Program/XLLC/OBJ/croutine.o b/Program/XLLC/OBJ/croutine.o
new file mode 100644
index 0000000000000000000000000000000000000000..1eb646fb9dae59a71d1b5a8b92e626221820bd00
Binary files /dev/null and b/Program/XLLC/OBJ/croutine.o differ
diff --git a/Program/XLLC/OBJ/event_groups.crf b/Program/XLLC/OBJ/event_groups.crf
new file mode 100644
index 0000000000000000000000000000000000000000..00a03f3967d09006cc74604adbe0e94e173cfffb
Binary files /dev/null and b/Program/XLLC/OBJ/event_groups.crf differ
diff --git a/Program/XLLC/OBJ/event_groups.d b/Program/XLLC/OBJ/event_groups.d
new file mode 100644
index 0000000000000000000000000000000000000000..160003159edbe511d9c76c95fd6f27b671209e7a
--- /dev/null
+++ b/Program/XLLC/OBJ/event_groups.d
@@ -0,0 +1,46 @@
+..\obj\event_groups.o: ..\FreeRTOS\event_groups.c
+..\obj\event_groups.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
+..\obj\event_groups.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\event_groups.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\event_groups.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\event_groups.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\event_groups.o: ..\SYSTEM\sys\sys.h
+..\obj\event_groups.o: ..\USER\stm32f10x.h
+..\obj\event_groups.o: ..\CORE\core_cm3.h
+..\obj\event_groups.o: ..\USER\system_stm32f10x.h
+..\obj\event_groups.o: ..\USER\stm32f10x_conf.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\event_groups.o: ..\USER\stm32f10x.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\event_groups.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\event_groups.o: ..\SYSTEM\usart\usart.h
+..\obj\event_groups.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\event_groups.o: ..\FreeRTOS\include\projdefs.h
+..\obj\event_groups.o: ..\FreeRTOS\include\portable.h
+..\obj\event_groups.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\event_groups.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\event_groups.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\event_groups.o: ..\FreeRTOS\include\task.h
+..\obj\event_groups.o: ..\FreeRTOS\include\list.h
+..\obj\event_groups.o: ..\FreeRTOS\include\timers.h
+..\obj\event_groups.o: ..\FreeRTOS\include\event_groups.h
diff --git a/Program/XLLC/OBJ/event_groups.o b/Program/XLLC/OBJ/event_groups.o
new file mode 100644
index 0000000000000000000000000000000000000000..6262292a92290b66881c8387385adaf18005a59b
Binary files /dev/null and b/Program/XLLC/OBJ/event_groups.o differ
diff --git a/Program/XLLC/OBJ/heap_4.crf b/Program/XLLC/OBJ/heap_4.crf
new file mode 100644
index 0000000000000000000000000000000000000000..b20f7ba19bd91f56e41e19472dfaeb5ab5956d2a
Binary files /dev/null and b/Program/XLLC/OBJ/heap_4.crf differ
diff --git a/Program/XLLC/OBJ/heap_4.d b/Program/XLLC/OBJ/heap_4.d
new file mode 100644
index 0000000000000000000000000000000000000000..994d2b7986963e48d66b7d87114852faef0125e4
--- /dev/null
+++ b/Program/XLLC/OBJ/heap_4.d
@@ -0,0 +1,44 @@
+..\obj\heap_4.o: ..\FreeRTOS\portable\MemMang\heap_4.c
+..\obj\heap_4.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
+..\obj\heap_4.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\heap_4.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\heap_4.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\heap_4.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\heap_4.o: ..\SYSTEM\sys\sys.h
+..\obj\heap_4.o: ..\USER\stm32f10x.h
+..\obj\heap_4.o: ..\CORE\core_cm3.h
+..\obj\heap_4.o: ..\USER\system_stm32f10x.h
+..\obj\heap_4.o: ..\USER\stm32f10x_conf.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\heap_4.o: ..\USER\stm32f10x.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\heap_4.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\heap_4.o: ..\SYSTEM\usart\usart.h
+..\obj\heap_4.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\heap_4.o: ..\FreeRTOS\include\projdefs.h
+..\obj\heap_4.o: ..\FreeRTOS\include\portable.h
+..\obj\heap_4.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\heap_4.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\heap_4.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\heap_4.o: ..\FreeRTOS\include\task.h
+..\obj\heap_4.o: ..\FreeRTOS\include\list.h
diff --git a/Program/XLLC/OBJ/heap_4.o b/Program/XLLC/OBJ/heap_4.o
new file mode 100644
index 0000000000000000000000000000000000000000..35ca64a0c13359372f37d5434a4dae4f9945a9d3
Binary files /dev/null and b/Program/XLLC/OBJ/heap_4.o differ
diff --git a/Program/XLLC/OBJ/init_task.crf b/Program/XLLC/OBJ/init_task.crf
new file mode 100644
index 0000000000000000000000000000000000000000..e7af3ff47ef9a17e2dc71b440a8ca6de0c52b75f
Binary files /dev/null and b/Program/XLLC/OBJ/init_task.crf differ
diff --git a/Program/XLLC/OBJ/init_task.d b/Program/XLLC/OBJ/init_task.d
new file mode 100644
index 0000000000000000000000000000000000000000..9f2490c5677bc8c393b7f2f92f3692a05d88beb3
--- /dev/null
+++ b/Program/XLLC/OBJ/init_task.d
@@ -0,0 +1,48 @@
+..\obj\init_task.o: ..\TASK\Init_task\Init_task.c
+..\obj\init_task.o: ..\TASK\Init_task\Init_task.h
+..\obj\init_task.o: ..\USER\include.h
+..\obj\init_task.o: ..\SYSTEM\sys\sys.h
+..\obj\init_task.o: ..\USER\stm32f10x.h
+..\obj\init_task.o: ..\CORE\core_cm3.h
+..\obj\init_task.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\init_task.o: ..\USER\system_stm32f10x.h
+..\obj\init_task.o: ..\USER\stm32f10x_conf.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\init_task.o: ..\USER\stm32f10x.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\init_task.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\init_task.o: ..\SYSTEM\usart\usart.h
+..\obj\init_task.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\init_task.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\init_task.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\init_task.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\init_task.o: ..\FreeRTOS\include\projdefs.h
+..\obj\init_task.o: ..\FreeRTOS\include\portable.h
+..\obj\init_task.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\init_task.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\init_task.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\init_task.o: ..\FreeRTOS\include\task.h
+..\obj\init_task.o: ..\FreeRTOS\include\list.h
+..\obj\init_task.o: ..\TASK\Init_task\Init_task.h
+..\obj\init_task.o: ..\HARDWARE\LED\LED.h
+..\obj\init_task.o: ..\TASK\LED_task\LED_task.h
diff --git a/Program/XLLC/OBJ/init_task.o b/Program/XLLC/OBJ/init_task.o
new file mode 100644
index 0000000000000000000000000000000000000000..2ce4458610dfed3567af32f5781f17d26f4fdef2
Binary files /dev/null and b/Program/XLLC/OBJ/init_task.o differ
diff --git a/Program/XLLC/OBJ/led.crf b/Program/XLLC/OBJ/led.crf
new file mode 100644
index 0000000000000000000000000000000000000000..60c0cac11e70c330a76f31460ee1401061296ae5
Binary files /dev/null and b/Program/XLLC/OBJ/led.crf differ
diff --git a/Program/XLLC/OBJ/led.d b/Program/XLLC/OBJ/led.d
new file mode 100644
index 0000000000000000000000000000000000000000..1d5319d688ed20e7dd1185a2972e7991c54c73aa
--- /dev/null
+++ b/Program/XLLC/OBJ/led.d
@@ -0,0 +1,32 @@
+..\obj\led.o: ..\HARDWARE\LED\LED.c
+..\obj\led.o: ..\HARDWARE\LED\LED.h
+..\obj\led.o: ..\SYSTEM\sys\sys.h
+..\obj\led.o: ..\USER\stm32f10x.h
+..\obj\led.o: ..\CORE\core_cm3.h
+..\obj\led.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\led.o: ..\USER\system_stm32f10x.h
+..\obj\led.o: ..\USER\stm32f10x_conf.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\led.o: ..\USER\stm32f10x.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\led.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/led.o b/Program/XLLC/OBJ/led.o
new file mode 100644
index 0000000000000000000000000000000000000000..16b4510d30cd0031cb953d86394e8b3e06ebefef
Binary files /dev/null and b/Program/XLLC/OBJ/led.o differ
diff --git a/Program/XLLC/OBJ/led_task.crf b/Program/XLLC/OBJ/led_task.crf
new file mode 100644
index 0000000000000000000000000000000000000000..9d8dacec4fec21a7eb280cfec431df984aae7b1b
Binary files /dev/null and b/Program/XLLC/OBJ/led_task.crf differ
diff --git a/Program/XLLC/OBJ/led_task.d b/Program/XLLC/OBJ/led_task.d
new file mode 100644
index 0000000000000000000000000000000000000000..927f2e8881eb96027243ded04b847b320f021c0e
--- /dev/null
+++ b/Program/XLLC/OBJ/led_task.d
@@ -0,0 +1,48 @@
+..\obj\led_task.o: ..\TASK\LED_task\LED_task.c
+..\obj\led_task.o: ..\TASK\LED_task\LED_task.h
+..\obj\led_task.o: ..\USER\include.h
+..\obj\led_task.o: ..\SYSTEM\sys\sys.h
+..\obj\led_task.o: ..\USER\stm32f10x.h
+..\obj\led_task.o: ..\CORE\core_cm3.h
+..\obj\led_task.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\led_task.o: ..\USER\system_stm32f10x.h
+..\obj\led_task.o: ..\USER\stm32f10x_conf.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\led_task.o: ..\USER\stm32f10x.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\led_task.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\led_task.o: ..\SYSTEM\usart\usart.h
+..\obj\led_task.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\led_task.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\led_task.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\led_task.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\led_task.o: ..\FreeRTOS\include\projdefs.h
+..\obj\led_task.o: ..\FreeRTOS\include\portable.h
+..\obj\led_task.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\led_task.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\led_task.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\led_task.o: ..\FreeRTOS\include\task.h
+..\obj\led_task.o: ..\FreeRTOS\include\list.h
+..\obj\led_task.o: ..\TASK\Init_task\Init_task.h
+..\obj\led_task.o: ..\USER\include.h
+..\obj\led_task.o: ..\HARDWARE\LED\LED.h
diff --git a/Program/XLLC/OBJ/led_task.o b/Program/XLLC/OBJ/led_task.o
new file mode 100644
index 0000000000000000000000000000000000000000..ee1df4eaff2531472057ea82c55b5d8d0a3ebd1c
Binary files /dev/null and b/Program/XLLC/OBJ/led_task.o differ
diff --git a/Program/XLLC/OBJ/list.crf b/Program/XLLC/OBJ/list.crf
new file mode 100644
index 0000000000000000000000000000000000000000..4a0689a42798c4cd7b1f27a8a419383fb11efabf
Binary files /dev/null and b/Program/XLLC/OBJ/list.crf differ
diff --git a/Program/XLLC/OBJ/list.d b/Program/XLLC/OBJ/list.d
new file mode 100644
index 0000000000000000000000000000000000000000..25d1c1fddef75955d339bb729d7218abbe14700b
--- /dev/null
+++ b/Program/XLLC/OBJ/list.d
@@ -0,0 +1,43 @@
+..\obj\list.o: ..\FreeRTOS\list.c
+..\obj\list.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
+..\obj\list.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\list.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\list.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\list.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\list.o: ..\SYSTEM\sys\sys.h
+..\obj\list.o: ..\USER\stm32f10x.h
+..\obj\list.o: ..\CORE\core_cm3.h
+..\obj\list.o: ..\USER\system_stm32f10x.h
+..\obj\list.o: ..\USER\stm32f10x_conf.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\list.o: ..\USER\stm32f10x.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\list.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\list.o: ..\SYSTEM\usart\usart.h
+..\obj\list.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\list.o: ..\FreeRTOS\include\projdefs.h
+..\obj\list.o: ..\FreeRTOS\include\portable.h
+..\obj\list.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\list.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\list.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\list.o: ..\FreeRTOS\include\list.h
diff --git a/Program/XLLC/OBJ/list.o b/Program/XLLC/OBJ/list.o
new file mode 100644
index 0000000000000000000000000000000000000000..e032f7cd56d3caa224dc1a1b8f2973dc34e32b59
Binary files /dev/null and b/Program/XLLC/OBJ/list.o differ
diff --git a/Program/XLLC/OBJ/main.crf b/Program/XLLC/OBJ/main.crf
new file mode 100644
index 0000000000000000000000000000000000000000..b9678a559b64ab887bee8209eb570edb5f244ac1
Binary files /dev/null and b/Program/XLLC/OBJ/main.crf differ
diff --git a/Program/XLLC/OBJ/main.d b/Program/XLLC/OBJ/main.d
new file mode 100644
index 0000000000000000000000000000000000000000..15b290e0cbfc7bba1f771087dc78d13e622a6110
--- /dev/null
+++ b/Program/XLLC/OBJ/main.d
@@ -0,0 +1,47 @@
+..\obj\main.o: main.c
+..\obj\main.o: include.h
+..\obj\main.o: ..\SYSTEM\sys\sys.h
+..\obj\main.o: ..\USER\stm32f10x.h
+..\obj\main.o: ..\CORE\core_cm3.h
+..\obj\main.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\main.o: ..\USER\system_stm32f10x.h
+..\obj\main.o: ..\USER\stm32f10x_conf.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\main.o: ..\USER\stm32f10x.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\main.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\main.o: ..\SYSTEM\usart\usart.h
+..\obj\main.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\main.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\main.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\main.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\main.o: ..\FreeRTOS\include\projdefs.h
+..\obj\main.o: ..\FreeRTOS\include\portable.h
+..\obj\main.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\main.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\main.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\main.o: ..\FreeRTOS\include\task.h
+..\obj\main.o: ..\FreeRTOS\include\list.h
+..\obj\main.o: ..\TASK\Init_task\Init_task.h
+..\obj\main.o: ..\USER\include.h
+..\obj\main.o: ..\HARDWARE\LED\LED.h
diff --git a/Program/XLLC/OBJ/main.o b/Program/XLLC/OBJ/main.o
new file mode 100644
index 0000000000000000000000000000000000000000..2eafcca7bef6684b0086470eb3fd8cb82e125728
Binary files /dev/null and b/Program/XLLC/OBJ/main.o differ
diff --git a/Program/XLLC/OBJ/misc.crf b/Program/XLLC/OBJ/misc.crf
new file mode 100644
index 0000000000000000000000000000000000000000..f9d5fd3176c1375c377cd90e3135b11e6356199c
Binary files /dev/null and b/Program/XLLC/OBJ/misc.crf differ
diff --git a/Program/XLLC/OBJ/misc.d b/Program/XLLC/OBJ/misc.d
new file mode 100644
index 0000000000000000000000000000000000000000..26aad905f21b02ac98fd57587abc27f7622d73c5
--- /dev/null
+++ b/Program/XLLC/OBJ/misc.d
@@ -0,0 +1,31 @@
+..\obj\misc.o: ..\STM32F10x_FWLib\src\misc.c
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\misc.o: ..\USER\stm32f10x.h
+..\obj\misc.o: ..\CORE\core_cm3.h
+..\obj\misc.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\misc.o: ..\USER\system_stm32f10x.h
+..\obj\misc.o: ..\USER\stm32f10x_conf.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\misc.o: ..\USER\stm32f10x.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\misc.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/misc.o b/Program/XLLC/OBJ/misc.o
new file mode 100644
index 0000000000000000000000000000000000000000..f07488afebd353d42febd7fbde95fc9d0b0206a7
Binary files /dev/null and b/Program/XLLC/OBJ/misc.o differ
diff --git a/Program/XLLC/OBJ/port.crf b/Program/XLLC/OBJ/port.crf
new file mode 100644
index 0000000000000000000000000000000000000000..d53a97c521038ac8189a16fd1d644d21c751eaac
Binary files /dev/null and b/Program/XLLC/OBJ/port.crf differ
diff --git a/Program/XLLC/OBJ/port.d b/Program/XLLC/OBJ/port.d
new file mode 100644
index 0000000000000000000000000000000000000000..dc2460451db07ba87edf6c910c75dadebf302baa
--- /dev/null
+++ b/Program/XLLC/OBJ/port.d
@@ -0,0 +1,43 @@
+..\obj\port.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\port.c
+..\obj\port.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\port.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\port.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\port.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\port.o: ..\SYSTEM\sys\sys.h
+..\obj\port.o: ..\USER\stm32f10x.h
+..\obj\port.o: ..\CORE\core_cm3.h
+..\obj\port.o: ..\USER\system_stm32f10x.h
+..\obj\port.o: ..\USER\stm32f10x_conf.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\port.o: ..\USER\stm32f10x.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\port.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\port.o: ..\SYSTEM\usart\usart.h
+..\obj\port.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\port.o: ..\FreeRTOS\include\projdefs.h
+..\obj\port.o: ..\FreeRTOS\include\portable.h
+..\obj\port.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\port.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\port.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\port.o: ..\FreeRTOS\include\task.h
+..\obj\port.o: ..\FreeRTOS\include\list.h
diff --git a/Program/XLLC/OBJ/port.o b/Program/XLLC/OBJ/port.o
new file mode 100644
index 0000000000000000000000000000000000000000..c0dbb476b62c5bb44f533999cdb62afc4184a75a
Binary files /dev/null and b/Program/XLLC/OBJ/port.o differ
diff --git a/Program/XLLC/OBJ/queue.crf b/Program/XLLC/OBJ/queue.crf
new file mode 100644
index 0000000000000000000000000000000000000000..e97aa57f11a599a5892b3d6eaaa160fb42bc851d
Binary files /dev/null and b/Program/XLLC/OBJ/queue.crf differ
diff --git a/Program/XLLC/OBJ/queue.d b/Program/XLLC/OBJ/queue.d
new file mode 100644
index 0000000000000000000000000000000000000000..3359e7b302d211104e020f4b8717411a68b9ba26
--- /dev/null
+++ b/Program/XLLC/OBJ/queue.d
@@ -0,0 +1,46 @@
+..\obj\queue.o: ..\FreeRTOS\queue.c
+..\obj\queue.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
+..\obj\queue.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h
+..\obj\queue.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\queue.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\queue.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\queue.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\queue.o: ..\SYSTEM\sys\sys.h
+..\obj\queue.o: ..\USER\stm32f10x.h
+..\obj\queue.o: ..\CORE\core_cm3.h
+..\obj\queue.o: ..\USER\system_stm32f10x.h
+..\obj\queue.o: ..\USER\stm32f10x_conf.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\queue.o: ..\USER\stm32f10x.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\queue.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\queue.o: ..\SYSTEM\usart\usart.h
+..\obj\queue.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\queue.o: ..\FreeRTOS\include\projdefs.h
+..\obj\queue.o: ..\FreeRTOS\include\portable.h
+..\obj\queue.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\queue.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\queue.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\queue.o: ..\FreeRTOS\include\task.h
+..\obj\queue.o: ..\FreeRTOS\include\list.h
+..\obj\queue.o: ..\FreeRTOS\include\queue.h
diff --git a/Program/XLLC/OBJ/queue.o b/Program/XLLC/OBJ/queue.o
new file mode 100644
index 0000000000000000000000000000000000000000..1c25935268f206fb151d6d74214d237cf3cfd3ee
Binary files /dev/null and b/Program/XLLC/OBJ/queue.o differ
diff --git a/Program/XLLC/OBJ/startup_stm32f10x_hd.d b/Program/XLLC/OBJ/startup_stm32f10x_hd.d
new file mode 100644
index 0000000000000000000000000000000000000000..8678b5fd78743f8bb0a53e8259eb461213501f88
--- /dev/null
+++ b/Program/XLLC/OBJ/startup_stm32f10x_hd.d
@@ -0,0 +1 @@
+..\obj\startup_stm32f10x_hd.o: ..\CORE\startup_stm32f10x_hd.s
diff --git a/Program/XLLC/OBJ/startup_stm32f10x_hd.lst b/Program/XLLC/OBJ/startup_stm32f10x_hd.lst
new file mode 100644
index 0000000000000000000000000000000000000000..51a2d5ece46be43153363a0ddf25b0e9856384df
--- /dev/null
+++ b/Program/XLLC/OBJ/startup_stm32f10x_hd.lst
@@ -0,0 +1,1467 @@
+
+
+
+ARM Macro Assembler    Page 1 
+
+
+    1 00000000         ;******************** (C) COPYRIGHT 2011 STMicroelectron
+                       ics ********************
+    2 00000000         ;* File Name          : startup_stm32f10x_hd.s
+    3 00000000         ;* Author             : MCD Application Team
+    4 00000000         ;* Version            : V3.5.0
+    5 00000000         ;* Date               : 11-March-2011
+    6 00000000         ;* Description        : STM32F10x High Density Devices v
+                       ector table for MDK-ARM 
+    7 00000000         ;*                      toolchain. 
+    8 00000000         ;*                      This module performs:
+    9 00000000         ;*                      - Set the initial SP
+   10 00000000         ;*                      - Set the initial PC == Reset_Ha
+                       ndler
+   11 00000000         ;*                      - Set the vector table entries w
+                       ith the exceptions ISR address
+   12 00000000         ;*                      - Configure the clock system and
+                        also configure the external 
+   13 00000000         ;*                        SRAM mounted on STM3210E-EVAL 
+                       board to be used as data 
+   14 00000000         ;*                        memory (optional, to be enable
+                       d by user)
+   15 00000000         ;*                      - Branches to __main in the C li
+                       brary (which eventually
+   16 00000000         ;*                        calls main()).
+   17 00000000         ;*                      After Reset the CortexM3 process
+                       or is in Thread mode,
+   18 00000000         ;*                      priority is Privileged, and the 
+                       Stack is set to Main.
+   19 00000000         ;* <<< Use Configuration Wizard in Context Menu >>>   
+   20 00000000         ;*******************************************************
+                       ************************
+   21 00000000         ; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS A
+                       T PROVIDING CUSTOMERS
+   22 00000000         ; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN OR
+                       DER FOR THEM TO SAVE TIME.
+   23 00000000         ; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIAB
+                       LE FOR ANY DIRECT,
+   24 00000000         ; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY 
+                       CLAIMS ARISING FROM THE
+   25 00000000         ; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOM
+                       ERS OF THE CODING
+   26 00000000         ; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR 
+                       PRODUCTS.
+   27 00000000         ;*******************************************************
+                       ************************
+   28 00000000         
+   29 00000000         ; Amount of memory (in bytes) allocated for Stack
+   30 00000000         ; Tailor this value to your application needs
+   31 00000000         ;  Stack Configuration
+   32 00000000         ;    Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
+   33 00000000         ; 
+   34 00000000         
+   35 00000000 00000400 
+                       Stack_Size
+                               EQU              0x00000400
+   36 00000000         
+   37 00000000                 AREA             STACK, NOINIT, READWRITE, ALIGN
+=3
+   38 00000000         Stack_Mem
+
+
+
+ARM Macro Assembler    Page 2 
+
+
+                               SPACE            Stack_Size
+   39 00000400         __initial_sp
+   40 00000400         
+   41 00000400         ;  Heap Configuration
+   42 00000400         ;     Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
+   43 00000400         ; 
+   44 00000400         
+   45 00000400 00000200 
+                       Heap_Size
+                               EQU              0x00000200
+   46 00000400         
+   47 00000400                 AREA             HEAP, NOINIT, READWRITE, ALIGN=
+3
+   48 00000000         __heap_base
+   49 00000000         Heap_Mem
+                               SPACE            Heap_Size
+   50 00000200         __heap_limit
+   51 00000200         
+   52 00000200                 PRESERVE8
+   53 00000200                 THUMB
+   54 00000200         
+   55 00000200         
+   56 00000200         ; Vector Table Mapped to Address 0 at Reset
+   57 00000200                 AREA             RESET, DATA, READONLY
+   58 00000000                 EXPORT           __Vectors
+   59 00000000                 EXPORT           __Vectors_End
+   60 00000000                 EXPORT           __Vectors_Size
+   61 00000000         
+   62 00000000 00000000 
+                       __Vectors
+                               DCD              __initial_sp ; Top of Stack
+   63 00000004 00000000        DCD              Reset_Handler ; Reset Handler
+   64 00000008 00000000        DCD              NMI_Handler ; NMI Handler
+   65 0000000C 00000000        DCD              HardFault_Handler ; Hard Fault 
+                                                            Handler
+   66 00000010 00000000        DCD              MemManage_Handler 
+                                                            ; MPU Fault Handler
+                                                            
+   67 00000014 00000000        DCD              BusFault_Handler 
+                                                            ; Bus Fault Handler
+                                                            
+   68 00000018 00000000        DCD              UsageFault_Handler ; Usage Faul
+                                                            t Handler
+   69 0000001C 00000000        DCD              0           ; Reserved
+   70 00000020 00000000        DCD              0           ; Reserved
+   71 00000024 00000000        DCD              0           ; Reserved
+   72 00000028 00000000        DCD              0           ; Reserved
+   73 0000002C 00000000        DCD              SVC_Handler ; SVCall Handler
+   74 00000030 00000000        DCD              DebugMon_Handler ; Debug Monito
+                                                            r Handler
+   75 00000034 00000000        DCD              0           ; Reserved
+   76 00000038 00000000        DCD              PendSV_Handler ; PendSV Handler
+                                                            
+   77 0000003C 00000000        DCD              SysTick_Handler 
+                                                            ; SysTick Handler
+   78 00000040         
+   79 00000040         ; External Interrupts
+   80 00000040 00000000        DCD              WWDG_IRQHandler 
+                                                            ; Window Watchdog
+
+
+
+ARM Macro Assembler    Page 3 
+
+
+   81 00000044 00000000        DCD              PVD_IRQHandler ; PVD through EX
+                                                            TI Line detect
+   82 00000048 00000000        DCD              TAMPER_IRQHandler ; Tamper
+   83 0000004C 00000000        DCD              RTC_IRQHandler ; RTC
+   84 00000050 00000000        DCD              FLASH_IRQHandler ; Flash
+   85 00000054 00000000        DCD              RCC_IRQHandler ; RCC
+   86 00000058 00000000        DCD              EXTI0_IRQHandler ; EXTI Line 0
+   87 0000005C 00000000        DCD              EXTI1_IRQHandler ; EXTI Line 1
+   88 00000060 00000000        DCD              EXTI2_IRQHandler ; EXTI Line 2
+   89 00000064 00000000        DCD              EXTI3_IRQHandler ; EXTI Line 3
+   90 00000068 00000000        DCD              EXTI4_IRQHandler ; EXTI Line 4
+   91 0000006C 00000000        DCD              DMA1_Channel1_IRQHandler 
+                                                            ; DMA1 Channel 1
+   92 00000070 00000000        DCD              DMA1_Channel2_IRQHandler 
+                                                            ; DMA1 Channel 2
+   93 00000074 00000000        DCD              DMA1_Channel3_IRQHandler 
+                                                            ; DMA1 Channel 3
+   94 00000078 00000000        DCD              DMA1_Channel4_IRQHandler 
+                                                            ; DMA1 Channel 4
+   95 0000007C 00000000        DCD              DMA1_Channel5_IRQHandler 
+                                                            ; DMA1 Channel 5
+   96 00000080 00000000        DCD              DMA1_Channel6_IRQHandler 
+                                                            ; DMA1 Channel 6
+   97 00000084 00000000        DCD              DMA1_Channel7_IRQHandler 
+                                                            ; DMA1 Channel 7
+   98 00000088 00000000        DCD              ADC1_2_IRQHandler ; ADC1 & ADC2
+                                                            
+   99 0000008C 00000000        DCD              USB_HP_CAN1_TX_IRQHandler ; USB
+                                                             High Priority or C
+                                                            AN1 TX
+  100 00000090 00000000        DCD              USB_LP_CAN1_RX0_IRQHandler ; US
+                                                            B Low  Priority or 
+                                                            CAN1 RX0
+  101 00000094 00000000        DCD              CAN1_RX1_IRQHandler ; CAN1 RX1
+  102 00000098 00000000        DCD              CAN1_SCE_IRQHandler ; CAN1 SCE
+  103 0000009C 00000000        DCD              EXTI9_5_IRQHandler 
+                                                            ; EXTI Line 9..5
+  104 000000A0 00000000        DCD              TIM1_BRK_IRQHandler 
+                                                            ; TIM1 Break
+  105 000000A4 00000000        DCD              TIM1_UP_IRQHandler 
+                                                            ; TIM1 Update
+  106 000000A8 00000000        DCD              TIM1_TRG_COM_IRQHandler ; TIM1 
+                                                            Trigger and Commuta
+                                                            tion
+  107 000000AC 00000000        DCD              TIM1_CC_IRQHandler ; TIM1 Captu
+                                                            re Compare
+  108 000000B0 00000000        DCD              TIM2_IRQHandler ; TIM2
+  109 000000B4 00000000        DCD              TIM3_IRQHandler ; TIM3
+  110 000000B8 00000000        DCD              TIM4_IRQHandler ; TIM4
+  111 000000BC 00000000        DCD              I2C1_EV_IRQHandler ; I2C1 Event
+                                                            
+  112 000000C0 00000000        DCD              I2C1_ER_IRQHandler ; I2C1 Error
+                                                            
+  113 000000C4 00000000        DCD              I2C2_EV_IRQHandler ; I2C2 Event
+                                                            
+  114 000000C8 00000000        DCD              I2C2_ER_IRQHandler ; I2C2 Error
+                                                            
+  115 000000CC 00000000        DCD              SPI1_IRQHandler ; SPI1
+  116 000000D0 00000000        DCD              SPI2_IRQHandler ; SPI2
+
+
+
+ARM Macro Assembler    Page 4 
+
+
+  117 000000D4 00000000        DCD              USART1_IRQHandler ; USART1
+  118 000000D8 00000000        DCD              USART2_IRQHandler ; USART2
+  119 000000DC 00000000        DCD              USART3_IRQHandler ; USART3
+  120 000000E0 00000000        DCD              EXTI15_10_IRQHandler 
+                                                            ; EXTI Line 15..10
+  121 000000E4 00000000        DCD              RTCAlarm_IRQHandler ; RTC Alarm
+                                                             through EXTI Line
+  122 000000E8 00000000        DCD              USBWakeUp_IRQHandler ; USB Wake
+                                                            up from suspend
+  123 000000EC 00000000        DCD              TIM8_BRK_IRQHandler 
+                                                            ; TIM8 Break
+  124 000000F0 00000000        DCD              TIM8_UP_IRQHandler 
+                                                            ; TIM8 Update
+  125 000000F4 00000000        DCD              TIM8_TRG_COM_IRQHandler ; TIM8 
+                                                            Trigger and Commuta
+                                                            tion
+  126 000000F8 00000000        DCD              TIM8_CC_IRQHandler ; TIM8 Captu
+                                                            re Compare
+  127 000000FC 00000000        DCD              ADC3_IRQHandler ; ADC3
+  128 00000100 00000000        DCD              FSMC_IRQHandler ; FSMC
+  129 00000104 00000000        DCD              SDIO_IRQHandler ; SDIO
+  130 00000108 00000000        DCD              TIM5_IRQHandler ; TIM5
+  131 0000010C 00000000        DCD              SPI3_IRQHandler ; SPI3
+  132 00000110 00000000        DCD              UART4_IRQHandler ; UART4
+  133 00000114 00000000        DCD              UART5_IRQHandler ; UART5
+  134 00000118 00000000        DCD              TIM6_IRQHandler ; TIM6
+  135 0000011C 00000000        DCD              TIM7_IRQHandler ; TIM7
+  136 00000120 00000000        DCD              DMA2_Channel1_IRQHandler 
+                                                            ; DMA2 Channel1
+  137 00000124 00000000        DCD              DMA2_Channel2_IRQHandler 
+                                                            ; DMA2 Channel2
+  138 00000128 00000000        DCD              DMA2_Channel3_IRQHandler 
+                                                            ; DMA2 Channel3
+  139 0000012C 00000000        DCD              DMA2_Channel4_5_IRQHandler ; DM
+                                                            A2 Channel4 & Chann
+                                                            el5
+  140 00000130         __Vectors_End
+  141 00000130         
+  142 00000130 00000130 
+                       __Vectors_Size
+                               EQU              __Vectors_End - __Vectors
+  143 00000130         
+  144 00000130                 AREA             |.text|, CODE, READONLY
+  145 00000000         
+  146 00000000         ; Reset handler
+  147 00000000         Reset_Handler
+                               PROC
+  148 00000000                 EXPORT           Reset_Handler             [WEAK
+]
+  149 00000000                 IMPORT           __main
+  150 00000000                 IMPORT           SystemInit
+  151 00000000 4809            LDR              R0, =SystemInit
+  152 00000002 4780            BLX              R0
+  153 00000004 4809            LDR              R0, =__main
+  154 00000006 4700            BX               R0
+  155 00000008                 ENDP
+  156 00000008         
+  157 00000008         ; Dummy Exception Handlers (infinite loops which can be 
+                       modified)
+
+
+
+ARM Macro Assembler    Page 5 
+
+
+  158 00000008         
+  159 00000008         NMI_Handler
+                               PROC
+  160 00000008                 EXPORT           NMI_Handler                [WEA
+K]
+  161 00000008 E7FE            B                .
+  162 0000000A                 ENDP
+  164 0000000A         HardFault_Handler
+                               PROC
+  165 0000000A                 EXPORT           HardFault_Handler          [WEA
+K]
+  166 0000000A E7FE            B                .
+  167 0000000C                 ENDP
+  169 0000000C         MemManage_Handler
+                               PROC
+  170 0000000C                 EXPORT           MemManage_Handler          [WEA
+K]
+  171 0000000C E7FE            B                .
+  172 0000000E                 ENDP
+  174 0000000E         BusFault_Handler
+                               PROC
+  175 0000000E                 EXPORT           BusFault_Handler           [WEA
+K]
+  176 0000000E E7FE            B                .
+  177 00000010                 ENDP
+  179 00000010         UsageFault_Handler
+                               PROC
+  180 00000010                 EXPORT           UsageFault_Handler         [WEA
+K]
+  181 00000010 E7FE            B                .
+  182 00000012                 ENDP
+  183 00000012         SVC_Handler
+                               PROC
+  184 00000012                 EXPORT           SVC_Handler                [WEA
+K]
+  185 00000012 E7FE            B                .
+  186 00000014                 ENDP
+  188 00000014         DebugMon_Handler
+                               PROC
+  189 00000014                 EXPORT           DebugMon_Handler           [WEA
+K]
+  190 00000014 E7FE            B                .
+  191 00000016                 ENDP
+  192 00000016         PendSV_Handler
+                               PROC
+  193 00000016                 EXPORT           PendSV_Handler             [WEA
+K]
+  194 00000016 E7FE            B                .
+  195 00000018                 ENDP
+  196 00000018         SysTick_Handler
+                               PROC
+  197 00000018                 EXPORT           SysTick_Handler            [WEA
+K]
+  198 00000018 E7FE            B                .
+  199 0000001A                 ENDP
+  200 0000001A         
+  201 0000001A         Default_Handler
+                               PROC
+  202 0000001A         
+
+
+
+ARM Macro Assembler    Page 6 
+
+
+  203 0000001A                 EXPORT           WWDG_IRQHandler            [WEA
+K]
+  204 0000001A                 EXPORT           PVD_IRQHandler             [WEA
+K]
+  205 0000001A                 EXPORT           TAMPER_IRQHandler          [WEA
+K]
+  206 0000001A                 EXPORT           RTC_IRQHandler             [WEA
+K]
+  207 0000001A                 EXPORT           FLASH_IRQHandler           [WEA
+K]
+  208 0000001A                 EXPORT           RCC_IRQHandler             [WEA
+K]
+  209 0000001A                 EXPORT           EXTI0_IRQHandler           [WEA
+K]
+  210 0000001A                 EXPORT           EXTI1_IRQHandler           [WEA
+K]
+  211 0000001A                 EXPORT           EXTI2_IRQHandler           [WEA
+K]
+  212 0000001A                 EXPORT           EXTI3_IRQHandler           [WEA
+K]
+  213 0000001A                 EXPORT           EXTI4_IRQHandler           [WEA
+K]
+  214 0000001A                 EXPORT           DMA1_Channel1_IRQHandler   [WEA
+K]
+  215 0000001A                 EXPORT           DMA1_Channel2_IRQHandler   [WEA
+K]
+  216 0000001A                 EXPORT           DMA1_Channel3_IRQHandler   [WEA
+K]
+  217 0000001A                 EXPORT           DMA1_Channel4_IRQHandler   [WEA
+K]
+  218 0000001A                 EXPORT           DMA1_Channel5_IRQHandler   [WEA
+K]
+  219 0000001A                 EXPORT           DMA1_Channel6_IRQHandler   [WEA
+K]
+  220 0000001A                 EXPORT           DMA1_Channel7_IRQHandler   [WEA
+K]
+  221 0000001A                 EXPORT           ADC1_2_IRQHandler          [WEA
+K]
+  222 0000001A                 EXPORT           USB_HP_CAN1_TX_IRQHandler  [WEA
+K]
+  223 0000001A                 EXPORT           USB_LP_CAN1_RX0_IRQHandler [WEA
+K]
+  224 0000001A                 EXPORT           CAN1_RX1_IRQHandler        [WEA
+K]
+  225 0000001A                 EXPORT           CAN1_SCE_IRQHandler        [WEA
+K]
+  226 0000001A                 EXPORT           EXTI9_5_IRQHandler         [WEA
+K]
+  227 0000001A                 EXPORT           TIM1_BRK_IRQHandler        [WEA
+K]
+  228 0000001A                 EXPORT           TIM1_UP_IRQHandler         [WEA
+K]
+  229 0000001A                 EXPORT           TIM1_TRG_COM_IRQHandler    [WEA
+K]
+  230 0000001A                 EXPORT           TIM1_CC_IRQHandler         [WEA
+K]
+  231 0000001A                 EXPORT           TIM2_IRQHandler            [WEA
+K]
+  232 0000001A                 EXPORT           TIM3_IRQHandler            [WEA
+
+
+
+ARM Macro Assembler    Page 7 
+
+
+K]
+  233 0000001A                 EXPORT           TIM4_IRQHandler            [WEA
+K]
+  234 0000001A                 EXPORT           I2C1_EV_IRQHandler         [WEA
+K]
+  235 0000001A                 EXPORT           I2C1_ER_IRQHandler         [WEA
+K]
+  236 0000001A                 EXPORT           I2C2_EV_IRQHandler         [WEA
+K]
+  237 0000001A                 EXPORT           I2C2_ER_IRQHandler         [WEA
+K]
+  238 0000001A                 EXPORT           SPI1_IRQHandler            [WEA
+K]
+  239 0000001A                 EXPORT           SPI2_IRQHandler            [WEA
+K]
+  240 0000001A                 EXPORT           USART1_IRQHandler          [WEA
+K]
+  241 0000001A                 EXPORT           USART2_IRQHandler          [WEA
+K]
+  242 0000001A                 EXPORT           USART3_IRQHandler          [WEA
+K]
+  243 0000001A                 EXPORT           EXTI15_10_IRQHandler       [WEA
+K]
+  244 0000001A                 EXPORT           RTCAlarm_IRQHandler        [WEA
+K]
+  245 0000001A                 EXPORT           USBWakeUp_IRQHandler       [WEA
+K]
+  246 0000001A                 EXPORT           TIM8_BRK_IRQHandler        [WEA
+K]
+  247 0000001A                 EXPORT           TIM8_UP_IRQHandler         [WEA
+K]
+  248 0000001A                 EXPORT           TIM8_TRG_COM_IRQHandler    [WEA
+K]
+  249 0000001A                 EXPORT           TIM8_CC_IRQHandler         [WEA
+K]
+  250 0000001A                 EXPORT           ADC3_IRQHandler            [WEA
+K]
+  251 0000001A                 EXPORT           FSMC_IRQHandler            [WEA
+K]
+  252 0000001A                 EXPORT           SDIO_IRQHandler            [WEA
+K]
+  253 0000001A                 EXPORT           TIM5_IRQHandler            [WEA
+K]
+  254 0000001A                 EXPORT           SPI3_IRQHandler            [WEA
+K]
+  255 0000001A                 EXPORT           UART4_IRQHandler           [WEA
+K]
+  256 0000001A                 EXPORT           UART5_IRQHandler           [WEA
+K]
+  257 0000001A                 EXPORT           TIM6_IRQHandler            [WEA
+K]
+  258 0000001A                 EXPORT           TIM7_IRQHandler            [WEA
+K]
+  259 0000001A                 EXPORT           DMA2_Channel1_IRQHandler   [WEA
+K]
+  260 0000001A                 EXPORT           DMA2_Channel2_IRQHandler   [WEA
+K]
+  261 0000001A                 EXPORT           DMA2_Channel3_IRQHandler   [WEA
+K]
+
+
+
+ARM Macro Assembler    Page 8 
+
+
+  262 0000001A                 EXPORT           DMA2_Channel4_5_IRQHandler [WEA
+K]
+  263 0000001A         
+  264 0000001A         WWDG_IRQHandler
+  265 0000001A         PVD_IRQHandler
+  266 0000001A         TAMPER_IRQHandler
+  267 0000001A         RTC_IRQHandler
+  268 0000001A         FLASH_IRQHandler
+  269 0000001A         RCC_IRQHandler
+  270 0000001A         EXTI0_IRQHandler
+  271 0000001A         EXTI1_IRQHandler
+  272 0000001A         EXTI2_IRQHandler
+  273 0000001A         EXTI3_IRQHandler
+  274 0000001A         EXTI4_IRQHandler
+  275 0000001A         DMA1_Channel1_IRQHandler
+  276 0000001A         DMA1_Channel2_IRQHandler
+  277 0000001A         DMA1_Channel3_IRQHandler
+  278 0000001A         DMA1_Channel4_IRQHandler
+  279 0000001A         DMA1_Channel5_IRQHandler
+  280 0000001A         DMA1_Channel6_IRQHandler
+  281 0000001A         DMA1_Channel7_IRQHandler
+  282 0000001A         ADC1_2_IRQHandler
+  283 0000001A         USB_HP_CAN1_TX_IRQHandler
+  284 0000001A         USB_LP_CAN1_RX0_IRQHandler
+  285 0000001A         CAN1_RX1_IRQHandler
+  286 0000001A         CAN1_SCE_IRQHandler
+  287 0000001A         EXTI9_5_IRQHandler
+  288 0000001A         TIM1_BRK_IRQHandler
+  289 0000001A         TIM1_UP_IRQHandler
+  290 0000001A         TIM1_TRG_COM_IRQHandler
+  291 0000001A         TIM1_CC_IRQHandler
+  292 0000001A         TIM2_IRQHandler
+  293 0000001A         TIM3_IRQHandler
+  294 0000001A         TIM4_IRQHandler
+  295 0000001A         I2C1_EV_IRQHandler
+  296 0000001A         I2C1_ER_IRQHandler
+  297 0000001A         I2C2_EV_IRQHandler
+  298 0000001A         I2C2_ER_IRQHandler
+  299 0000001A         SPI1_IRQHandler
+  300 0000001A         SPI2_IRQHandler
+  301 0000001A         USART1_IRQHandler
+  302 0000001A         USART2_IRQHandler
+  303 0000001A         USART3_IRQHandler
+  304 0000001A         EXTI15_10_IRQHandler
+  305 0000001A         RTCAlarm_IRQHandler
+  306 0000001A         USBWakeUp_IRQHandler
+  307 0000001A         TIM8_BRK_IRQHandler
+  308 0000001A         TIM8_UP_IRQHandler
+  309 0000001A         TIM8_TRG_COM_IRQHandler
+  310 0000001A         TIM8_CC_IRQHandler
+  311 0000001A         ADC3_IRQHandler
+  312 0000001A         FSMC_IRQHandler
+  313 0000001A         SDIO_IRQHandler
+  314 0000001A         TIM5_IRQHandler
+  315 0000001A         SPI3_IRQHandler
+  316 0000001A         UART4_IRQHandler
+  317 0000001A         UART5_IRQHandler
+  318 0000001A         TIM6_IRQHandler
+  319 0000001A         TIM7_IRQHandler
+
+
+
+ARM Macro Assembler    Page 9 
+
+
+  320 0000001A         DMA2_Channel1_IRQHandler
+  321 0000001A         DMA2_Channel2_IRQHandler
+  322 0000001A         DMA2_Channel3_IRQHandler
+  323 0000001A         DMA2_Channel4_5_IRQHandler
+  324 0000001A E7FE            B                .
+  325 0000001C         
+  326 0000001C                 ENDP
+  327 0000001C         
+  328 0000001C                 ALIGN
+  329 0000001C         
+  330 0000001C         ;*******************************************************
+                       ************************
+  331 0000001C         ; User Stack and Heap initialization
+  332 0000001C         ;*******************************************************
+                       ************************
+  333 0000001C                 IF               :DEF:__MICROLIB
+  340 0000001C         
+  341 0000001C                 IMPORT           __use_two_region_memory
+  342 0000001C                 EXPORT           __user_initial_stackheap
+  343 0000001C         
+  344 0000001C         __user_initial_stackheap
+  345 0000001C         
+  346 0000001C 4804            LDR              R0, =  Heap_Mem
+  347 0000001E 4905            LDR              R1, =(Stack_Mem + Stack_Size)
+  348 00000020 4A05            LDR              R2, = (Heap_Mem +  Heap_Size)
+  349 00000022 4B06            LDR              R3, = Stack_Mem
+  350 00000024 4770            BX               LR
+  351 00000026         
+  352 00000026 00 00           ALIGN
+  353 00000028         
+  354 00000028                 ENDIF
+  355 00000028         
+  356 00000028                 END
+              00000000 
+              00000000 
+              00000000 
+              00000400 
+              00000200 
+              00000000 
+Command Line: --debug --xref --diag_suppress=9931 --cpu=Cortex-M3 --apcs=interw
+ork --depend=..\obj\startup_stm32f10x_hd.d -o..\obj\startup_stm32f10x_hd.o -IC:
+\Keil_v5\ARM\PACK\Keil\STM32F1xx_DFP\2.3.0\Device\Include -IC:\Keil_v5\ARM\CMSI
+S\Include --predefine="__UVISION_VERSION SETA 533" --predefine="STM32F10X_HD SE
+TA 1" --list=..\obj\startup_stm32f10x_hd.lst ..\CORE\startup_stm32f10x_hd.s
+
+
+
+ARM Macro Assembler    Page 1 Alphabetic symbol ordering
+Relocatable symbols
+
+STACK 00000000
+
+Symbol: STACK
+   Definitions
+      At line 37 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      None
+Comment: STACK unused
+Stack_Mem 00000000
+
+Symbol: Stack_Mem
+   Definitions
+      At line 38 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 347 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 349 in file ..\CORE\startup_stm32f10x_hd.s
+
+__initial_sp 00000400
+
+Symbol: __initial_sp
+   Definitions
+      At line 39 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 62 in file ..\CORE\startup_stm32f10x_hd.s
+Comment: __initial_sp used once
+3 symbols
+
+
+
+ARM Macro Assembler    Page 1 Alphabetic symbol ordering
+Relocatable symbols
+
+HEAP 00000000
+
+Symbol: HEAP
+   Definitions
+      At line 47 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      None
+Comment: HEAP unused
+Heap_Mem 00000000
+
+Symbol: Heap_Mem
+   Definitions
+      At line 49 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 346 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 348 in file ..\CORE\startup_stm32f10x_hd.s
+
+__heap_base 00000000
+
+Symbol: __heap_base
+   Definitions
+      At line 48 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      None
+Comment: __heap_base unused
+__heap_limit 00000200
+
+Symbol: __heap_limit
+   Definitions
+      At line 50 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      None
+Comment: __heap_limit unused
+4 symbols
+
+
+
+ARM Macro Assembler    Page 1 Alphabetic symbol ordering
+Relocatable symbols
+
+RESET 00000000
+
+Symbol: RESET
+   Definitions
+      At line 57 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      None
+Comment: RESET unused
+__Vectors 00000000
+
+Symbol: __Vectors
+   Definitions
+      At line 62 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 58 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 142 in file ..\CORE\startup_stm32f10x_hd.s
+
+__Vectors_End 00000130
+
+Symbol: __Vectors_End
+   Definitions
+      At line 140 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 59 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 142 in file ..\CORE\startup_stm32f10x_hd.s
+
+3 symbols
+
+
+
+ARM Macro Assembler    Page 1 Alphabetic symbol ordering
+Relocatable symbols
+
+.text 00000000
+
+Symbol: .text
+   Definitions
+      At line 144 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      None
+Comment: .text unused
+ADC1_2_IRQHandler 0000001A
+
+Symbol: ADC1_2_IRQHandler
+   Definitions
+      At line 282 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 98 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 221 in file ..\CORE\startup_stm32f10x_hd.s
+
+ADC3_IRQHandler 0000001A
+
+Symbol: ADC3_IRQHandler
+   Definitions
+      At line 311 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 127 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 250 in file ..\CORE\startup_stm32f10x_hd.s
+
+BusFault_Handler 0000000E
+
+Symbol: BusFault_Handler
+   Definitions
+      At line 174 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 67 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 175 in file ..\CORE\startup_stm32f10x_hd.s
+
+CAN1_RX1_IRQHandler 0000001A
+
+Symbol: CAN1_RX1_IRQHandler
+   Definitions
+      At line 285 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 101 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 224 in file ..\CORE\startup_stm32f10x_hd.s
+
+CAN1_SCE_IRQHandler 0000001A
+
+Symbol: CAN1_SCE_IRQHandler
+   Definitions
+      At line 286 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 102 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 225 in file ..\CORE\startup_stm32f10x_hd.s
+
+DMA1_Channel1_IRQHandler 0000001A
+
+Symbol: DMA1_Channel1_IRQHandler
+   Definitions
+      At line 275 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+
+
+
+ARM Macro Assembler    Page 2 Alphabetic symbol ordering
+Relocatable symbols
+
+      At line 91 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 214 in file ..\CORE\startup_stm32f10x_hd.s
+
+DMA1_Channel2_IRQHandler 0000001A
+
+Symbol: DMA1_Channel2_IRQHandler
+   Definitions
+      At line 276 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 92 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 215 in file ..\CORE\startup_stm32f10x_hd.s
+
+DMA1_Channel3_IRQHandler 0000001A
+
+Symbol: DMA1_Channel3_IRQHandler
+   Definitions
+      At line 277 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 93 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 216 in file ..\CORE\startup_stm32f10x_hd.s
+
+DMA1_Channel4_IRQHandler 0000001A
+
+Symbol: DMA1_Channel4_IRQHandler
+   Definitions
+      At line 278 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 94 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 217 in file ..\CORE\startup_stm32f10x_hd.s
+
+DMA1_Channel5_IRQHandler 0000001A
+
+Symbol: DMA1_Channel5_IRQHandler
+   Definitions
+      At line 279 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 95 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 218 in file ..\CORE\startup_stm32f10x_hd.s
+
+DMA1_Channel6_IRQHandler 0000001A
+
+Symbol: DMA1_Channel6_IRQHandler
+   Definitions
+      At line 280 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 96 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 219 in file ..\CORE\startup_stm32f10x_hd.s
+
+DMA1_Channel7_IRQHandler 0000001A
+
+Symbol: DMA1_Channel7_IRQHandler
+   Definitions
+      At line 281 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 97 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 220 in file ..\CORE\startup_stm32f10x_hd.s
+
+DMA2_Channel1_IRQHandler 0000001A
+
+
+
+
+ARM Macro Assembler    Page 3 Alphabetic symbol ordering
+Relocatable symbols
+
+Symbol: DMA2_Channel1_IRQHandler
+   Definitions
+      At line 320 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 136 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 259 in file ..\CORE\startup_stm32f10x_hd.s
+
+DMA2_Channel2_IRQHandler 0000001A
+
+Symbol: DMA2_Channel2_IRQHandler
+   Definitions
+      At line 321 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 137 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 260 in file ..\CORE\startup_stm32f10x_hd.s
+
+DMA2_Channel3_IRQHandler 0000001A
+
+Symbol: DMA2_Channel3_IRQHandler
+   Definitions
+      At line 322 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 138 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 261 in file ..\CORE\startup_stm32f10x_hd.s
+
+DMA2_Channel4_5_IRQHandler 0000001A
+
+Symbol: DMA2_Channel4_5_IRQHandler
+   Definitions
+      At line 323 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 139 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 262 in file ..\CORE\startup_stm32f10x_hd.s
+
+DebugMon_Handler 00000014
+
+Symbol: DebugMon_Handler
+   Definitions
+      At line 188 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 74 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 189 in file ..\CORE\startup_stm32f10x_hd.s
+
+Default_Handler 0000001A
+
+Symbol: Default_Handler
+   Definitions
+      At line 201 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      None
+Comment: Default_Handler unused
+EXTI0_IRQHandler 0000001A
+
+Symbol: EXTI0_IRQHandler
+   Definitions
+      At line 270 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 86 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 209 in file ..\CORE\startup_stm32f10x_hd.s
+
+
+
+ARM Macro Assembler    Page 4 Alphabetic symbol ordering
+Relocatable symbols
+
+
+EXTI15_10_IRQHandler 0000001A
+
+Symbol: EXTI15_10_IRQHandler
+   Definitions
+      At line 304 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 120 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 243 in file ..\CORE\startup_stm32f10x_hd.s
+
+EXTI1_IRQHandler 0000001A
+
+Symbol: EXTI1_IRQHandler
+   Definitions
+      At line 271 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 87 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 210 in file ..\CORE\startup_stm32f10x_hd.s
+
+EXTI2_IRQHandler 0000001A
+
+Symbol: EXTI2_IRQHandler
+   Definitions
+      At line 272 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 88 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 211 in file ..\CORE\startup_stm32f10x_hd.s
+
+EXTI3_IRQHandler 0000001A
+
+Symbol: EXTI3_IRQHandler
+   Definitions
+      At line 273 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 89 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 212 in file ..\CORE\startup_stm32f10x_hd.s
+
+EXTI4_IRQHandler 0000001A
+
+Symbol: EXTI4_IRQHandler
+   Definitions
+      At line 274 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 90 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 213 in file ..\CORE\startup_stm32f10x_hd.s
+
+EXTI9_5_IRQHandler 0000001A
+
+Symbol: EXTI9_5_IRQHandler
+   Definitions
+      At line 287 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 103 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 226 in file ..\CORE\startup_stm32f10x_hd.s
+
+FLASH_IRQHandler 0000001A
+
+Symbol: FLASH_IRQHandler
+   Definitions
+
+
+
+ARM Macro Assembler    Page 5 Alphabetic symbol ordering
+Relocatable symbols
+
+      At line 268 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 84 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 207 in file ..\CORE\startup_stm32f10x_hd.s
+
+FSMC_IRQHandler 0000001A
+
+Symbol: FSMC_IRQHandler
+   Definitions
+      At line 312 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 128 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 251 in file ..\CORE\startup_stm32f10x_hd.s
+
+HardFault_Handler 0000000A
+
+Symbol: HardFault_Handler
+   Definitions
+      At line 164 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 65 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 165 in file ..\CORE\startup_stm32f10x_hd.s
+
+I2C1_ER_IRQHandler 0000001A
+
+Symbol: I2C1_ER_IRQHandler
+   Definitions
+      At line 296 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 112 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 235 in file ..\CORE\startup_stm32f10x_hd.s
+
+I2C1_EV_IRQHandler 0000001A
+
+Symbol: I2C1_EV_IRQHandler
+   Definitions
+      At line 295 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 111 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 234 in file ..\CORE\startup_stm32f10x_hd.s
+
+I2C2_ER_IRQHandler 0000001A
+
+Symbol: I2C2_ER_IRQHandler
+   Definitions
+      At line 298 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 114 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 237 in file ..\CORE\startup_stm32f10x_hd.s
+
+I2C2_EV_IRQHandler 0000001A
+
+Symbol: I2C2_EV_IRQHandler
+   Definitions
+      At line 297 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 113 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 236 in file ..\CORE\startup_stm32f10x_hd.s
+
+
+
+
+ARM Macro Assembler    Page 6 Alphabetic symbol ordering
+Relocatable symbols
+
+MemManage_Handler 0000000C
+
+Symbol: MemManage_Handler
+   Definitions
+      At line 169 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 66 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 170 in file ..\CORE\startup_stm32f10x_hd.s
+
+NMI_Handler 00000008
+
+Symbol: NMI_Handler
+   Definitions
+      At line 159 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 64 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 160 in file ..\CORE\startup_stm32f10x_hd.s
+
+PVD_IRQHandler 0000001A
+
+Symbol: PVD_IRQHandler
+   Definitions
+      At line 265 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 81 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 204 in file ..\CORE\startup_stm32f10x_hd.s
+
+PendSV_Handler 00000016
+
+Symbol: PendSV_Handler
+   Definitions
+      At line 192 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 76 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 193 in file ..\CORE\startup_stm32f10x_hd.s
+
+RCC_IRQHandler 0000001A
+
+Symbol: RCC_IRQHandler
+   Definitions
+      At line 269 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 85 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 208 in file ..\CORE\startup_stm32f10x_hd.s
+
+RTCAlarm_IRQHandler 0000001A
+
+Symbol: RTCAlarm_IRQHandler
+   Definitions
+      At line 305 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 121 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 244 in file ..\CORE\startup_stm32f10x_hd.s
+
+RTC_IRQHandler 0000001A
+
+Symbol: RTC_IRQHandler
+   Definitions
+      At line 267 in file ..\CORE\startup_stm32f10x_hd.s
+
+
+
+ARM Macro Assembler    Page 7 Alphabetic symbol ordering
+Relocatable symbols
+
+   Uses
+      At line 83 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 206 in file ..\CORE\startup_stm32f10x_hd.s
+
+Reset_Handler 00000000
+
+Symbol: Reset_Handler
+   Definitions
+      At line 147 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 63 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 148 in file ..\CORE\startup_stm32f10x_hd.s
+
+SDIO_IRQHandler 0000001A
+
+Symbol: SDIO_IRQHandler
+   Definitions
+      At line 313 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 129 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 252 in file ..\CORE\startup_stm32f10x_hd.s
+
+SPI1_IRQHandler 0000001A
+
+Symbol: SPI1_IRQHandler
+   Definitions
+      At line 299 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 115 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 238 in file ..\CORE\startup_stm32f10x_hd.s
+
+SPI2_IRQHandler 0000001A
+
+Symbol: SPI2_IRQHandler
+   Definitions
+      At line 300 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 116 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 239 in file ..\CORE\startup_stm32f10x_hd.s
+
+SPI3_IRQHandler 0000001A
+
+Symbol: SPI3_IRQHandler
+   Definitions
+      At line 315 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 131 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 254 in file ..\CORE\startup_stm32f10x_hd.s
+
+SVC_Handler 00000012
+
+Symbol: SVC_Handler
+   Definitions
+      At line 183 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 73 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 184 in file ..\CORE\startup_stm32f10x_hd.s
+
+SysTick_Handler 00000018
+
+
+
+ARM Macro Assembler    Page 8 Alphabetic symbol ordering
+Relocatable symbols
+
+
+Symbol: SysTick_Handler
+   Definitions
+      At line 196 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 77 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 197 in file ..\CORE\startup_stm32f10x_hd.s
+
+TAMPER_IRQHandler 0000001A
+
+Symbol: TAMPER_IRQHandler
+   Definitions
+      At line 266 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 82 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 205 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM1_BRK_IRQHandler 0000001A
+
+Symbol: TIM1_BRK_IRQHandler
+   Definitions
+      At line 288 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 104 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 227 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM1_CC_IRQHandler 0000001A
+
+Symbol: TIM1_CC_IRQHandler
+   Definitions
+      At line 291 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 107 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 230 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM1_TRG_COM_IRQHandler 0000001A
+
+Symbol: TIM1_TRG_COM_IRQHandler
+   Definitions
+      At line 290 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 106 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 229 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM1_UP_IRQHandler 0000001A
+
+Symbol: TIM1_UP_IRQHandler
+   Definitions
+      At line 289 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 105 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 228 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM2_IRQHandler 0000001A
+
+Symbol: TIM2_IRQHandler
+   Definitions
+      At line 292 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+
+
+
+ARM Macro Assembler    Page 9 Alphabetic symbol ordering
+Relocatable symbols
+
+      At line 108 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 231 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM3_IRQHandler 0000001A
+
+Symbol: TIM3_IRQHandler
+   Definitions
+      At line 293 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 109 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 232 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM4_IRQHandler 0000001A
+
+Symbol: TIM4_IRQHandler
+   Definitions
+      At line 294 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 110 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 233 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM5_IRQHandler 0000001A
+
+Symbol: TIM5_IRQHandler
+   Definitions
+      At line 314 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 130 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 253 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM6_IRQHandler 0000001A
+
+Symbol: TIM6_IRQHandler
+   Definitions
+      At line 318 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 134 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 257 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM7_IRQHandler 0000001A
+
+Symbol: TIM7_IRQHandler
+   Definitions
+      At line 319 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 135 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 258 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM8_BRK_IRQHandler 0000001A
+
+Symbol: TIM8_BRK_IRQHandler
+   Definitions
+      At line 307 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 123 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 246 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM8_CC_IRQHandler 0000001A
+
+
+
+
+ARM Macro Assembler    Page 10 Alphabetic symbol ordering
+Relocatable symbols
+
+Symbol: TIM8_CC_IRQHandler
+   Definitions
+      At line 310 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 126 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 249 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM8_TRG_COM_IRQHandler 0000001A
+
+Symbol: TIM8_TRG_COM_IRQHandler
+   Definitions
+      At line 309 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 125 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 248 in file ..\CORE\startup_stm32f10x_hd.s
+
+TIM8_UP_IRQHandler 0000001A
+
+Symbol: TIM8_UP_IRQHandler
+   Definitions
+      At line 308 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 124 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 247 in file ..\CORE\startup_stm32f10x_hd.s
+
+UART4_IRQHandler 0000001A
+
+Symbol: UART4_IRQHandler
+   Definitions
+      At line 316 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 132 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 255 in file ..\CORE\startup_stm32f10x_hd.s
+
+UART5_IRQHandler 0000001A
+
+Symbol: UART5_IRQHandler
+   Definitions
+      At line 317 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 133 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 256 in file ..\CORE\startup_stm32f10x_hd.s
+
+USART1_IRQHandler 0000001A
+
+Symbol: USART1_IRQHandler
+   Definitions
+      At line 301 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 117 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 240 in file ..\CORE\startup_stm32f10x_hd.s
+
+USART2_IRQHandler 0000001A
+
+Symbol: USART2_IRQHandler
+   Definitions
+      At line 302 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 118 in file ..\CORE\startup_stm32f10x_hd.s
+
+
+
+ARM Macro Assembler    Page 11 Alphabetic symbol ordering
+Relocatable symbols
+
+      At line 241 in file ..\CORE\startup_stm32f10x_hd.s
+
+USART3_IRQHandler 0000001A
+
+Symbol: USART3_IRQHandler
+   Definitions
+      At line 303 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 119 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 242 in file ..\CORE\startup_stm32f10x_hd.s
+
+USBWakeUp_IRQHandler 0000001A
+
+Symbol: USBWakeUp_IRQHandler
+   Definitions
+      At line 306 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 122 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 245 in file ..\CORE\startup_stm32f10x_hd.s
+
+USB_HP_CAN1_TX_IRQHandler 0000001A
+
+Symbol: USB_HP_CAN1_TX_IRQHandler
+   Definitions
+      At line 283 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 99 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 222 in file ..\CORE\startup_stm32f10x_hd.s
+
+USB_LP_CAN1_RX0_IRQHandler 0000001A
+
+Symbol: USB_LP_CAN1_RX0_IRQHandler
+   Definitions
+      At line 284 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 100 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 223 in file ..\CORE\startup_stm32f10x_hd.s
+
+UsageFault_Handler 00000010
+
+Symbol: UsageFault_Handler
+   Definitions
+      At line 179 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 68 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 180 in file ..\CORE\startup_stm32f10x_hd.s
+
+WWDG_IRQHandler 0000001A
+
+Symbol: WWDG_IRQHandler
+   Definitions
+      At line 264 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 80 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 203 in file ..\CORE\startup_stm32f10x_hd.s
+
+__user_initial_stackheap 0000001C
+
+Symbol: __user_initial_stackheap
+
+
+
+ARM Macro Assembler    Page 12 Alphabetic symbol ordering
+Relocatable symbols
+
+   Definitions
+      At line 344 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 342 in file ..\CORE\startup_stm32f10x_hd.s
+Comment: __user_initial_stackheap used once
+73 symbols
+
+
+
+ARM Macro Assembler    Page 1 Alphabetic symbol ordering
+Absolute symbols
+
+Heap_Size 00000200
+
+Symbol: Heap_Size
+   Definitions
+      At line 45 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 49 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 348 in file ..\CORE\startup_stm32f10x_hd.s
+
+Stack_Size 00000400
+
+Symbol: Stack_Size
+   Definitions
+      At line 35 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 38 in file ..\CORE\startup_stm32f10x_hd.s
+      At line 347 in file ..\CORE\startup_stm32f10x_hd.s
+
+__Vectors_Size 00000130
+
+Symbol: __Vectors_Size
+   Definitions
+      At line 142 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 60 in file ..\CORE\startup_stm32f10x_hd.s
+Comment: __Vectors_Size used once
+3 symbols
+
+
+
+ARM Macro Assembler    Page 1 Alphabetic symbol ordering
+External symbols
+
+SystemInit 00000000
+
+Symbol: SystemInit
+   Definitions
+      At line 150 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 151 in file ..\CORE\startup_stm32f10x_hd.s
+Comment: SystemInit used once
+__main 00000000
+
+Symbol: __main
+   Definitions
+      At line 149 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      At line 153 in file ..\CORE\startup_stm32f10x_hd.s
+Comment: __main used once
+__use_two_region_memory 00000000
+
+Symbol: __use_two_region_memory
+   Definitions
+      At line 341 in file ..\CORE\startup_stm32f10x_hd.s
+   Uses
+      None
+Comment: __use_two_region_memory unused
+3 symbols
+425 symbols in table
diff --git a/Program/XLLC/OBJ/startup_stm32f10x_hd.o b/Program/XLLC/OBJ/startup_stm32f10x_hd.o
new file mode 100644
index 0000000000000000000000000000000000000000..56711830287f58b7e1e1e5c6a324d64b7a2dff74
Binary files /dev/null and b/Program/XLLC/OBJ/startup_stm32f10x_hd.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_adc.crf b/Program/XLLC/OBJ/stm32f10x_adc.crf
new file mode 100644
index 0000000000000000000000000000000000000000..c394e7a9ffd960b92f77cf1771d20aa8e50d892a
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_adc.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_adc.d b/Program/XLLC/OBJ/stm32f10x_adc.d
new file mode 100644
index 0000000000000000000000000000000000000000..5309c3830a15eb5110e4f2d78f9bfb7279d3b8e5
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_adc.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\src\stm32f10x_adc.c
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_adc.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_adc.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_adc.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_adc.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_adc.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_adc.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_adc.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_adc.o b/Program/XLLC/OBJ/stm32f10x_adc.o
new file mode 100644
index 0000000000000000000000000000000000000000..241b67c6c7523527f41495e1c07ebe946a5ed8c6
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_adc.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_bkp.crf b/Program/XLLC/OBJ/stm32f10x_bkp.crf
new file mode 100644
index 0000000000000000000000000000000000000000..7ae78a9db2bbde95b341bbbe546fbce47099445e
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_bkp.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_bkp.d b/Program/XLLC/OBJ/stm32f10x_bkp.d
new file mode 100644
index 0000000000000000000000000000000000000000..5d7cc191b662c32213f256f077864f98d645dcbe
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_bkp.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\src\stm32f10x_bkp.c
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_bkp.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_bkp.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_bkp.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_bkp.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_bkp.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_bkp.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_bkp.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_bkp.o b/Program/XLLC/OBJ/stm32f10x_bkp.o
new file mode 100644
index 0000000000000000000000000000000000000000..056264de8d8322c836820d676cbb42db3fe1af5b
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_bkp.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_can.crf b/Program/XLLC/OBJ/stm32f10x_can.crf
new file mode 100644
index 0000000000000000000000000000000000000000..cf3cd728087c5a7bec186f8580381a65cf5bf0ad
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_can.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_can.d b/Program/XLLC/OBJ/stm32f10x_can.d
new file mode 100644
index 0000000000000000000000000000000000000000..6e0329ddd2295da3e5ab0adf32066c9c28c15fd6
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_can.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\src\stm32f10x_can.c
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_can.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_can.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_can.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_can.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_can.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_can.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_can.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_can.o b/Program/XLLC/OBJ/stm32f10x_can.o
new file mode 100644
index 0000000000000000000000000000000000000000..654ce47fd74132ca4a4e92f43dca939ed21f7861
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_can.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_cec.crf b/Program/XLLC/OBJ/stm32f10x_cec.crf
new file mode 100644
index 0000000000000000000000000000000000000000..11d8243772a45152265d65c2ca7d2f4b652a596a
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_cec.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_cec.d b/Program/XLLC/OBJ/stm32f10x_cec.d
new file mode 100644
index 0000000000000000000000000000000000000000..39b30cf55ad5c660389cf0207e2aaf7dd04e92d7
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_cec.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\src\stm32f10x_cec.c
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_cec.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_cec.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_cec.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_cec.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_cec.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_cec.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_cec.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_cec.o b/Program/XLLC/OBJ/stm32f10x_cec.o
new file mode 100644
index 0000000000000000000000000000000000000000..51f9ef8a964a6c60840af8a36474f055a00c5451
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_cec.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_crc.crf b/Program/XLLC/OBJ/stm32f10x_crc.crf
new file mode 100644
index 0000000000000000000000000000000000000000..75d1c23f61a1367432cbcd9410990b3953ce723c
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_crc.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_crc.d b/Program/XLLC/OBJ/stm32f10x_crc.d
new file mode 100644
index 0000000000000000000000000000000000000000..b4e2f787ded505c9ff97ae335b7a7d854ebac8c3
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_crc.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\src\stm32f10x_crc.c
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_crc.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_crc.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_crc.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_crc.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_crc.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_crc.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_crc.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_crc.o b/Program/XLLC/OBJ/stm32f10x_crc.o
new file mode 100644
index 0000000000000000000000000000000000000000..c9b0181fc7ca532fe26b771f0e18b71361187f05
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_crc.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_dac.crf b/Program/XLLC/OBJ/stm32f10x_dac.crf
new file mode 100644
index 0000000000000000000000000000000000000000..15f45c5316761c2caf0f10492fd4862b38947482
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_dac.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_dac.d b/Program/XLLC/OBJ/stm32f10x_dac.d
new file mode 100644
index 0000000000000000000000000000000000000000..3c6b186ee85ce80b3a5699dc639d0676f6430764
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_dac.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\src\stm32f10x_dac.c
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_dac.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_dac.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_dac.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_dac.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_dac.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_dac.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_dac.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_dac.o b/Program/XLLC/OBJ/stm32f10x_dac.o
new file mode 100644
index 0000000000000000000000000000000000000000..1c49c55996ee18ac04e6844414031ca442cb07a3
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_dac.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_dbgmcu.crf b/Program/XLLC/OBJ/stm32f10x_dbgmcu.crf
new file mode 100644
index 0000000000000000000000000000000000000000..f2b6b285fd5eb204f3a2e1bd4eedb96f5904673c
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_dbgmcu.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_dbgmcu.d b/Program/XLLC/OBJ/stm32f10x_dbgmcu.d
new file mode 100644
index 0000000000000000000000000000000000000000..710c3480686589eb28bd3ae83b0c61eef861ad02
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_dbgmcu.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\src\stm32f10x_dbgmcu.c
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_dbgmcu.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_dbgmcu.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_dbgmcu.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_dbgmcu.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_dbgmcu.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_dbgmcu.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_dbgmcu.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_dbgmcu.o b/Program/XLLC/OBJ/stm32f10x_dbgmcu.o
new file mode 100644
index 0000000000000000000000000000000000000000..3c83830191004954a02fccb988d84c7a8e951dae
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_dbgmcu.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_dma.crf b/Program/XLLC/OBJ/stm32f10x_dma.crf
new file mode 100644
index 0000000000000000000000000000000000000000..049e97ac50ba4481fd8cd8ee8f308d16394aaae0
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_dma.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_dma.d b/Program/XLLC/OBJ/stm32f10x_dma.d
new file mode 100644
index 0000000000000000000000000000000000000000..d3666db24b7945ecf13bed93b7db3037a399b2c0
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_dma.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\src\stm32f10x_dma.c
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_dma.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_dma.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_dma.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_dma.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_dma.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_dma.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_dma.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_dma.o b/Program/XLLC/OBJ/stm32f10x_dma.o
new file mode 100644
index 0000000000000000000000000000000000000000..c5fe2f0035fd41ccbea730d2a22e2a6b437b18c1
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_dma.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_exti.crf b/Program/XLLC/OBJ/stm32f10x_exti.crf
new file mode 100644
index 0000000000000000000000000000000000000000..b9d13c2a076d90678ed63f2c4ab8bde7f0380e43
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_exti.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_exti.d b/Program/XLLC/OBJ/stm32f10x_exti.d
new file mode 100644
index 0000000000000000000000000000000000000000..afc4d40ff43606b22b4f146f39f92419436885b3
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_exti.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\src\stm32f10x_exti.c
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_exti.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_exti.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_exti.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_exti.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_exti.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_exti.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_exti.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_exti.o b/Program/XLLC/OBJ/stm32f10x_exti.o
new file mode 100644
index 0000000000000000000000000000000000000000..e54222fd9d936badd92f7018fcfc29a45c1c1eaf
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_exti.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_flash.crf b/Program/XLLC/OBJ/stm32f10x_flash.crf
new file mode 100644
index 0000000000000000000000000000000000000000..adfdc4d5c4ab05f87da0000ab1ef4e41d08070a1
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_flash.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_flash.d b/Program/XLLC/OBJ/stm32f10x_flash.d
new file mode 100644
index 0000000000000000000000000000000000000000..3568472974625a6e6aaaf1f3ff69c88ff29b0f57
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_flash.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\src\stm32f10x_flash.c
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_flash.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_flash.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_flash.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_flash.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_flash.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_flash.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_flash.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_flash.o b/Program/XLLC/OBJ/stm32f10x_flash.o
new file mode 100644
index 0000000000000000000000000000000000000000..afcdeda5d206b5c3b50af3a15363ecc973f10e73
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_flash.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_fsmc.crf b/Program/XLLC/OBJ/stm32f10x_fsmc.crf
new file mode 100644
index 0000000000000000000000000000000000000000..d0cd142aa2bb2255412a4b4cdbb8f2f76cd8831a
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_fsmc.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_fsmc.d b/Program/XLLC/OBJ/stm32f10x_fsmc.d
new file mode 100644
index 0000000000000000000000000000000000000000..b338ab9d7be60abc52ac5e8cd2fa51e8b0b4ccea
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_fsmc.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\src\stm32f10x_fsmc.c
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_fsmc.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_fsmc.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_fsmc.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_fsmc.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_fsmc.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_fsmc.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_fsmc.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_fsmc.o b/Program/XLLC/OBJ/stm32f10x_fsmc.o
new file mode 100644
index 0000000000000000000000000000000000000000..c7da7b00898ace4a9d1f3a53c6e37c4aaef4208f
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_fsmc.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_gpio.crf b/Program/XLLC/OBJ/stm32f10x_gpio.crf
new file mode 100644
index 0000000000000000000000000000000000000000..696da74461061359049c5e8ab8760b826f2a8b1f
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_gpio.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_gpio.d b/Program/XLLC/OBJ/stm32f10x_gpio.d
new file mode 100644
index 0000000000000000000000000000000000000000..8e3e102078705fb2b14de9d28bf74740e29e803b
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_gpio.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\src\stm32f10x_gpio.c
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_gpio.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_gpio.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_gpio.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_gpio.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_gpio.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_gpio.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_gpio.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_gpio.o b/Program/XLLC/OBJ/stm32f10x_gpio.o
new file mode 100644
index 0000000000000000000000000000000000000000..fd7fb07bfaf9346e4f2089c59be7a5d36af8b0da
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_gpio.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_i2c.crf b/Program/XLLC/OBJ/stm32f10x_i2c.crf
new file mode 100644
index 0000000000000000000000000000000000000000..694b84a203a755f4deaac37405c42300630e4347
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_i2c.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_i2c.d b/Program/XLLC/OBJ/stm32f10x_i2c.d
new file mode 100644
index 0000000000000000000000000000000000000000..c261022f3dc85ea88e802721384196c0523436ce
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_i2c.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\src\stm32f10x_i2c.c
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_i2c.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_i2c.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_i2c.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_i2c.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_i2c.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_i2c.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_i2c.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_i2c.o b/Program/XLLC/OBJ/stm32f10x_i2c.o
new file mode 100644
index 0000000000000000000000000000000000000000..467d0d00941a1844f06c706f94824a23aa579448
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_i2c.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_it.crf b/Program/XLLC/OBJ/stm32f10x_it.crf
new file mode 100644
index 0000000000000000000000000000000000000000..5cf6607a1454fd01571b5619e209ac9f2fc9ecb0
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_it.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_it.d b/Program/XLLC/OBJ/stm32f10x_it.d
new file mode 100644
index 0000000000000000000000000000000000000000..2384448fa6cd0b8a9e95ca165621808473391816
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_it.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_it.o: stm32f10x_it.c
+..\obj\stm32f10x_it.o: stm32f10x_it.h
+..\obj\stm32f10x_it.o: stm32f10x.h
+..\obj\stm32f10x_it.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_it.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_it.o: system_stm32f10x.h
+..\obj\stm32f10x_it.o: stm32f10x_conf.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_it.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_it.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_it.o b/Program/XLLC/OBJ/stm32f10x_it.o
new file mode 100644
index 0000000000000000000000000000000000000000..63bf18021d43f4c329d7ead6f632969cbadec45b
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_it.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_iwdg.crf b/Program/XLLC/OBJ/stm32f10x_iwdg.crf
new file mode 100644
index 0000000000000000000000000000000000000000..faae3639a78ace7ced98577363b561459539f4a2
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_iwdg.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_iwdg.d b/Program/XLLC/OBJ/stm32f10x_iwdg.d
new file mode 100644
index 0000000000000000000000000000000000000000..6ef20c937572c940deec852392c85ecd2f0fafaf
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_iwdg.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\src\stm32f10x_iwdg.c
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_iwdg.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_iwdg.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_iwdg.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_iwdg.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_iwdg.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_iwdg.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_iwdg.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_iwdg.o b/Program/XLLC/OBJ/stm32f10x_iwdg.o
new file mode 100644
index 0000000000000000000000000000000000000000..63173f116538b6430d8434bf1f705597f2649703
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_iwdg.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_pwr.crf b/Program/XLLC/OBJ/stm32f10x_pwr.crf
new file mode 100644
index 0000000000000000000000000000000000000000..8a71d1a3c294613f103407cbd65f0a9752e5af13
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_pwr.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_pwr.d b/Program/XLLC/OBJ/stm32f10x_pwr.d
new file mode 100644
index 0000000000000000000000000000000000000000..da6dc13864d478511203a85738206daef861e361
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_pwr.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\src\stm32f10x_pwr.c
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_pwr.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_pwr.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_pwr.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_pwr.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_pwr.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_pwr.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_pwr.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_pwr.o b/Program/XLLC/OBJ/stm32f10x_pwr.o
new file mode 100644
index 0000000000000000000000000000000000000000..0e4f700b8dfd36c29bda60490e6bbe6eac57b428
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_pwr.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_rcc.crf b/Program/XLLC/OBJ/stm32f10x_rcc.crf
new file mode 100644
index 0000000000000000000000000000000000000000..d823bf8468e970898c1b234dd1a831438082897e
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_rcc.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_rcc.d b/Program/XLLC/OBJ/stm32f10x_rcc.d
new file mode 100644
index 0000000000000000000000000000000000000000..360c3654e5929148ef756eb95afc1fe1486b0903
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_rcc.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\src\stm32f10x_rcc.c
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_rcc.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_rcc.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_rcc.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_rcc.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_rcc.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_rcc.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_rcc.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_rcc.o b/Program/XLLC/OBJ/stm32f10x_rcc.o
new file mode 100644
index 0000000000000000000000000000000000000000..1d85212337d868e83cc8d1f7d5513aab637080d7
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_rcc.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_rtc.crf b/Program/XLLC/OBJ/stm32f10x_rtc.crf
new file mode 100644
index 0000000000000000000000000000000000000000..694e6bf71b0fe5be4c67c1b1d0796d08604e0077
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_rtc.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_rtc.d b/Program/XLLC/OBJ/stm32f10x_rtc.d
new file mode 100644
index 0000000000000000000000000000000000000000..7dc3cdd1265b422a0f64b5b3509e87b513ad5e28
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_rtc.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\src\stm32f10x_rtc.c
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_rtc.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_rtc.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_rtc.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_rtc.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_rtc.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_rtc.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_rtc.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_rtc.o b/Program/XLLC/OBJ/stm32f10x_rtc.o
new file mode 100644
index 0000000000000000000000000000000000000000..c5c91f6d27f9a0180d407d18c9dbd46840c1a7b6
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_rtc.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_sdio.crf b/Program/XLLC/OBJ/stm32f10x_sdio.crf
new file mode 100644
index 0000000000000000000000000000000000000000..f742cc4bcf2b01d78511b2460ffd5a941d4b3235
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_sdio.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_sdio.d b/Program/XLLC/OBJ/stm32f10x_sdio.d
new file mode 100644
index 0000000000000000000000000000000000000000..5bfaa77c39ea02d28973af279b28d4f069215e9f
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_sdio.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\src\stm32f10x_sdio.c
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_sdio.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_sdio.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_sdio.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_sdio.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_sdio.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_sdio.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_sdio.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_sdio.o b/Program/XLLC/OBJ/stm32f10x_sdio.o
new file mode 100644
index 0000000000000000000000000000000000000000..732e9241806eb58831ff411509737268d0d3928f
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_sdio.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_spi.crf b/Program/XLLC/OBJ/stm32f10x_spi.crf
new file mode 100644
index 0000000000000000000000000000000000000000..d915c6e74af9e40b48e263f4f68d060fd1559fcb
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_spi.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_spi.d b/Program/XLLC/OBJ/stm32f10x_spi.d
new file mode 100644
index 0000000000000000000000000000000000000000..1c4a39f09281d546c88dc59a152326eb68c28569
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_spi.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\src\stm32f10x_spi.c
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_spi.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_spi.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_spi.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_spi.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_spi.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_spi.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_spi.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_spi.o b/Program/XLLC/OBJ/stm32f10x_spi.o
new file mode 100644
index 0000000000000000000000000000000000000000..dc3827d5a1ead88b43313f669237384a4d8a448d
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_spi.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_tim.crf b/Program/XLLC/OBJ/stm32f10x_tim.crf
new file mode 100644
index 0000000000000000000000000000000000000000..b823318aefc67419372846887203222e44597790
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_tim.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_tim.d b/Program/XLLC/OBJ/stm32f10x_tim.d
new file mode 100644
index 0000000000000000000000000000000000000000..b5a81ea530e85e35e59cbaf81dd7887cd5d66f0f
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_tim.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\src\stm32f10x_tim.c
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_tim.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_tim.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_tim.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_tim.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_tim.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_tim.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_tim.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_tim.o b/Program/XLLC/OBJ/stm32f10x_tim.o
new file mode 100644
index 0000000000000000000000000000000000000000..7806185d9fa6050b3bf655f2dd2b69070ac9a87a
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_tim.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_usart.crf b/Program/XLLC/OBJ/stm32f10x_usart.crf
new file mode 100644
index 0000000000000000000000000000000000000000..2b38685c6be9a5b325a1e29b4a2729f317273fb6
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_usart.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_usart.d b/Program/XLLC/OBJ/stm32f10x_usart.d
new file mode 100644
index 0000000000000000000000000000000000000000..437a74ea28b2d0a2cd7659be052b3fda19ba5edc
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_usart.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\src\stm32f10x_usart.c
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_usart.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_usart.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_usart.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_usart.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_usart.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_usart.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_usart.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_usart.o b/Program/XLLC/OBJ/stm32f10x_usart.o
new file mode 100644
index 0000000000000000000000000000000000000000..da716bad74ef153617380645ca2d02e80813d2c4
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_usart.o differ
diff --git a/Program/XLLC/OBJ/stm32f10x_wwdg.crf b/Program/XLLC/OBJ/stm32f10x_wwdg.crf
new file mode 100644
index 0000000000000000000000000000000000000000..ff04239d8a46d398069036627365001b148eaaad
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_wwdg.crf differ
diff --git a/Program/XLLC/OBJ/stm32f10x_wwdg.d b/Program/XLLC/OBJ/stm32f10x_wwdg.d
new file mode 100644
index 0000000000000000000000000000000000000000..a69dd463d00c6fafe81a3901bc0b422c8f13c99e
--- /dev/null
+++ b/Program/XLLC/OBJ/stm32f10x_wwdg.d
@@ -0,0 +1,31 @@
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\src\stm32f10x_wwdg.c
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_wwdg.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_wwdg.o: ..\CORE\core_cm3.h
+..\obj\stm32f10x_wwdg.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\stm32f10x_wwdg.o: ..\USER\system_stm32f10x.h
+..\obj\stm32f10x_wwdg.o: ..\USER\stm32f10x_conf.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\stm32f10x_wwdg.o: ..\USER\stm32f10x.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\stm32f10x_wwdg.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/stm32f10x_wwdg.o b/Program/XLLC/OBJ/stm32f10x_wwdg.o
new file mode 100644
index 0000000000000000000000000000000000000000..a3ef5ca0988421d6b7073a20f1753a42c9de180d
Binary files /dev/null and b/Program/XLLC/OBJ/stm32f10x_wwdg.o differ
diff --git a/Program/XLLC/OBJ/sys.crf b/Program/XLLC/OBJ/sys.crf
new file mode 100644
index 0000000000000000000000000000000000000000..cefa430329765a24c7524c35237d7e90934f3c59
Binary files /dev/null and b/Program/XLLC/OBJ/sys.crf differ
diff --git a/Program/XLLC/OBJ/sys.d b/Program/XLLC/OBJ/sys.d
new file mode 100644
index 0000000000000000000000000000000000000000..be43447dbecd0ced02a317d58d3d69bd242cde1f
--- /dev/null
+++ b/Program/XLLC/OBJ/sys.d
@@ -0,0 +1,43 @@
+..\obj\sys.o: ..\SYSTEM\sys\sys.c
+..\obj\sys.o: ..\SYSTEM\sys\sys.h
+..\obj\sys.o: ..\USER\stm32f10x.h
+..\obj\sys.o: ..\CORE\core_cm3.h
+..\obj\sys.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\sys.o: ..\USER\system_stm32f10x.h
+..\obj\sys.o: ..\USER\stm32f10x_conf.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\sys.o: ..\USER\stm32f10x.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\sys.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\sys.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\sys.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\sys.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\sys.o: ..\SYSTEM\usart\usart.h
+..\obj\sys.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\sys.o: ..\FreeRTOS\include\projdefs.h
+..\obj\sys.o: ..\FreeRTOS\include\portable.h
+..\obj\sys.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\sys.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\sys.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\sys.o: ..\FreeRTOS\include\task.h
+..\obj\sys.o: ..\FreeRTOS\include\list.h
diff --git a/Program/XLLC/OBJ/sys.o b/Program/XLLC/OBJ/sys.o
new file mode 100644
index 0000000000000000000000000000000000000000..cb01e9f2b509b0d3aaf0fd38743c9257a0fba045
Binary files /dev/null and b/Program/XLLC/OBJ/sys.o differ
diff --git a/Program/XLLC/OBJ/system_stm32f10x.crf b/Program/XLLC/OBJ/system_stm32f10x.crf
new file mode 100644
index 0000000000000000000000000000000000000000..16958f3c1318d6e8bfb7687afee88b0836976756
Binary files /dev/null and b/Program/XLLC/OBJ/system_stm32f10x.crf differ
diff --git a/Program/XLLC/OBJ/system_stm32f10x.d b/Program/XLLC/OBJ/system_stm32f10x.d
new file mode 100644
index 0000000000000000000000000000000000000000..9847b67e7f0bb81f48c19ac08db302ffb08f4c0d
--- /dev/null
+++ b/Program/XLLC/OBJ/system_stm32f10x.d
@@ -0,0 +1,30 @@
+..\obj\system_stm32f10x.o: system_stm32f10x.c
+..\obj\system_stm32f10x.o: stm32f10x.h
+..\obj\system_stm32f10x.o: ..\CORE\core_cm3.h
+..\obj\system_stm32f10x.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\system_stm32f10x.o: system_stm32f10x.h
+..\obj\system_stm32f10x.o: stm32f10x_conf.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\system_stm32f10x.o: ..\USER\stm32f10x.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\system_stm32f10x.o: ..\STM32F10x_FWLib\inc\misc.h
diff --git a/Program/XLLC/OBJ/system_stm32f10x.o b/Program/XLLC/OBJ/system_stm32f10x.o
new file mode 100644
index 0000000000000000000000000000000000000000..85a56ead8e951e88f7df6046eff3f0b6afcbdcfc
Binary files /dev/null and b/Program/XLLC/OBJ/system_stm32f10x.o differ
diff --git a/Program/XLLC/OBJ/tasks.crf b/Program/XLLC/OBJ/tasks.crf
new file mode 100644
index 0000000000000000000000000000000000000000..eca250722978f8a21358368292c88545c646028f
Binary files /dev/null and b/Program/XLLC/OBJ/tasks.crf differ
diff --git a/Program/XLLC/OBJ/tasks.d b/Program/XLLC/OBJ/tasks.d
new file mode 100644
index 0000000000000000000000000000000000000000..7dbef3447dd254f076a3ff572c08bec0e0726d6b
--- /dev/null
+++ b/Program/XLLC/OBJ/tasks.d
@@ -0,0 +1,47 @@
+..\obj\tasks.o: ..\FreeRTOS\tasks.c
+..\obj\tasks.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
+..\obj\tasks.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\string.h
+..\obj\tasks.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\tasks.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\tasks.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\tasks.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\tasks.o: ..\SYSTEM\sys\sys.h
+..\obj\tasks.o: ..\USER\stm32f10x.h
+..\obj\tasks.o: ..\CORE\core_cm3.h
+..\obj\tasks.o: ..\USER\system_stm32f10x.h
+..\obj\tasks.o: ..\USER\stm32f10x_conf.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\tasks.o: ..\USER\stm32f10x.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\tasks.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\tasks.o: ..\SYSTEM\usart\usart.h
+..\obj\tasks.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\tasks.o: ..\FreeRTOS\include\projdefs.h
+..\obj\tasks.o: ..\FreeRTOS\include\portable.h
+..\obj\tasks.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\tasks.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\tasks.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\tasks.o: ..\FreeRTOS\include\task.h
+..\obj\tasks.o: ..\FreeRTOS\include\list.h
+..\obj\tasks.o: ..\FreeRTOS\include\timers.h
+..\obj\tasks.o: ..\FreeRTOS\include\StackMacros.h
diff --git a/Program/XLLC/OBJ/tasks.o b/Program/XLLC/OBJ/tasks.o
new file mode 100644
index 0000000000000000000000000000000000000000..860c9af938e21ae5bc21f7b023b894a7476f4743
Binary files /dev/null and b/Program/XLLC/OBJ/tasks.o differ
diff --git a/Program/XLLC/OBJ/timers.crf b/Program/XLLC/OBJ/timers.crf
new file mode 100644
index 0000000000000000000000000000000000000000..76ca3fc61b935dae7e8a3d7001a3b155267f7ac1
Binary files /dev/null and b/Program/XLLC/OBJ/timers.crf differ
diff --git a/Program/XLLC/OBJ/timers.d b/Program/XLLC/OBJ/timers.d
new file mode 100644
index 0000000000000000000000000000000000000000..fbc12990d0901c7815a60f6248a4252710b453a5
--- /dev/null
+++ b/Program/XLLC/OBJ/timers.d
@@ -0,0 +1,46 @@
+..\obj\timers.o: ..\FreeRTOS\timers.c
+..\obj\timers.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdlib.h
+..\obj\timers.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\timers.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\timers.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\timers.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\timers.o: ..\SYSTEM\sys\sys.h
+..\obj\timers.o: ..\USER\stm32f10x.h
+..\obj\timers.o: ..\CORE\core_cm3.h
+..\obj\timers.o: ..\USER\system_stm32f10x.h
+..\obj\timers.o: ..\USER\stm32f10x_conf.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\timers.o: ..\USER\stm32f10x.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\timers.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\timers.o: ..\SYSTEM\usart\usart.h
+..\obj\timers.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\timers.o: ..\FreeRTOS\include\projdefs.h
+..\obj\timers.o: ..\FreeRTOS\include\portable.h
+..\obj\timers.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\timers.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\timers.o: ..\FreeRTOS\include\mpu_wrappers.h
+..\obj\timers.o: ..\FreeRTOS\include\task.h
+..\obj\timers.o: ..\FreeRTOS\include\list.h
+..\obj\timers.o: ..\FreeRTOS\include\queue.h
+..\obj\timers.o: ..\FreeRTOS\include\timers.h
diff --git a/Program/XLLC/OBJ/timers.o b/Program/XLLC/OBJ/timers.o
new file mode 100644
index 0000000000000000000000000000000000000000..bc979e4cf62e09806b3138de1d8e7f56b143e977
Binary files /dev/null and b/Program/XLLC/OBJ/timers.o differ
diff --git a/Program/XLLC/OBJ/usart.crf b/Program/XLLC/OBJ/usart.crf
new file mode 100644
index 0000000000000000000000000000000000000000..90cdfa672a00f43d4da008e9328f97e00ed49cb5
Binary files /dev/null and b/Program/XLLC/OBJ/usart.crf differ
diff --git a/Program/XLLC/OBJ/usart.d b/Program/XLLC/OBJ/usart.d
new file mode 100644
index 0000000000000000000000000000000000000000..fcaa8d85beb9b2ad4ffe38ff7430b26e22058d32
--- /dev/null
+++ b/Program/XLLC/OBJ/usart.d
@@ -0,0 +1,41 @@
+..\obj\usart.o: ..\SYSTEM\usart\usart.c
+..\obj\usart.o: ..\SYSTEM\sys\sys.h
+..\obj\usart.o: ..\USER\stm32f10x.h
+..\obj\usart.o: ..\CORE\core_cm3.h
+..\obj\usart.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
+..\obj\usart.o: ..\USER\system_stm32f10x.h
+..\obj\usart.o: ..\USER\stm32f10x_conf.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_adc.h
+..\obj\usart.o: ..\USER\stm32f10x.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_bkp.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_can.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_cec.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_crc.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_dac.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_dbgmcu.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_dma.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_exti.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_flash.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_fsmc.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_gpio.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_i2c.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_iwdg.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_pwr.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_rcc.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_rtc.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_sdio.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_spi.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_tim.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_usart.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\stm32f10x_wwdg.h
+..\obj\usart.o: ..\STM32F10x_FWLib\inc\misc.h
+..\obj\usart.o: ..\SYSTEM\usart\usart.h
+..\obj\usart.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
+..\obj\usart.o: ..\FreeRTOS\include\FreeRTOS.h
+..\obj\usart.o: C:\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
+..\obj\usart.o: ..\FreeRTOS\include\FreeRTOSConfig.h
+..\obj\usart.o: ..\FreeRTOS\include\projdefs.h
+..\obj\usart.o: ..\FreeRTOS\include\portable.h
+..\obj\usart.o: ..\FreeRTOS\include\deprecated_definitions.h
+..\obj\usart.o: ..\FreeRTOS\portable\RVDS\ARM_CM3\portmacro.h
+..\obj\usart.o: ..\FreeRTOS\include\mpu_wrappers.h
diff --git a/Program/XLLC/OBJ/usart.o b/Program/XLLC/OBJ/usart.o
new file mode 100644
index 0000000000000000000000000000000000000000..f27789b0b0da295a957f21ee4611bdaa9389fd38
Binary files /dev/null and b/Program/XLLC/OBJ/usart.o differ
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/misc.h b/Program/XLLC/STM32F10x_FWLib/inc/misc.h
new file mode 100644
index 0000000000000000000000000000000000000000..7d401ca9be1ef48a98fc453bdf441259c3887271
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/misc.h
@@ -0,0 +1,220 @@
+/**
+  ******************************************************************************
+  * @file    misc.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the miscellaneous
+  *          firmware library functions (add-on to CMSIS functions).
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MISC_H
+#define __MISC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup MISC
+  * @{
+  */
+
+/** @defgroup MISC_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  NVIC Init Structure definition  
+  */
+
+typedef struct
+{
+  uint8_t NVIC_IRQChannel;                    /*!< Specifies the IRQ channel to be enabled or disabled.
+                                                   This parameter can be a value of @ref IRQn_Type 
+                                                   (For the complete STM32 Devices IRQ Channels list, please
+                                                    refer to stm32f10x.h file) */
+
+  uint8_t NVIC_IRQChannelPreemptionPriority;  /*!< Specifies the pre-emption priority for the IRQ channel
+                                                   specified in NVIC_IRQChannel. This parameter can be a value
+                                                   between 0 and 15 as described in the table @ref NVIC_Priority_Table */
+
+  uint8_t NVIC_IRQChannelSubPriority;         /*!< Specifies the subpriority level for the IRQ channel specified
+                                                   in NVIC_IRQChannel. This parameter can be a value
+                                                   between 0 and 15 as described in the table @ref NVIC_Priority_Table */
+
+  FunctionalState NVIC_IRQChannelCmd;         /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel
+                                                   will be enabled or disabled. 
+                                                   This parameter can be set either to ENABLE or DISABLE */   
+} NVIC_InitTypeDef;
+ 
+/**
+  * @}
+  */
+
+/** @defgroup NVIC_Priority_Table 
+  * @{
+  */
+
+/**
+@code  
+ The table below gives the allowed values of the pre-emption priority and subpriority according
+ to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function
+  ============================================================================================================================
+    NVIC_PriorityGroup   | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority  | Description
+  ============================================================================================================================
+   NVIC_PriorityGroup_0  |                0                  |            0-15             |   0 bits for pre-emption priority
+                         |                                   |                             |   4 bits for subpriority
+  ----------------------------------------------------------------------------------------------------------------------------
+   NVIC_PriorityGroup_1  |                0-1                |            0-7              |   1 bits for pre-emption priority
+                         |                                   |                             |   3 bits for subpriority
+  ----------------------------------------------------------------------------------------------------------------------------    
+   NVIC_PriorityGroup_2  |                0-3                |            0-3              |   2 bits for pre-emption priority
+                         |                                   |                             |   2 bits for subpriority
+  ----------------------------------------------------------------------------------------------------------------------------    
+   NVIC_PriorityGroup_3  |                0-7                |            0-1              |   3 bits for pre-emption priority
+                         |                                   |                             |   1 bits for subpriority
+  ----------------------------------------------------------------------------------------------------------------------------    
+   NVIC_PriorityGroup_4  |                0-15               |            0                |   4 bits for pre-emption priority
+                         |                                   |                             |   0 bits for subpriority                       
+  ============================================================================================================================
+@endcode
+*/
+
+/**
+  * @}
+  */
+
+/** @defgroup MISC_Exported_Constants
+  * @{
+  */
+
+/** @defgroup Vector_Table_Base 
+  * @{
+  */
+
+#define NVIC_VectTab_RAM             ((uint32_t)0x20000000)
+#define NVIC_VectTab_FLASH           ((uint32_t)0x08000000)
+#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \
+                                  ((VECTTAB) == NVIC_VectTab_FLASH))
+/**
+  * @}
+  */
+
+/** @defgroup System_Low_Power 
+  * @{
+  */
+
+#define NVIC_LP_SEVONPEND            ((uint8_t)0x10)
+#define NVIC_LP_SLEEPDEEP            ((uint8_t)0x04)
+#define NVIC_LP_SLEEPONEXIT          ((uint8_t)0x02)
+#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \
+                        ((LP) == NVIC_LP_SLEEPDEEP) || \
+                        ((LP) == NVIC_LP_SLEEPONEXIT))
+/**
+  * @}
+  */
+
+/** @defgroup Preemption_Priority_Group 
+  * @{
+  */
+
+#define NVIC_PriorityGroup_0         ((uint32_t)0x700) /*!< 0 bits for pre-emption priority
+                                                            4 bits for subpriority */
+#define NVIC_PriorityGroup_1         ((uint32_t)0x600) /*!< 1 bits for pre-emption priority
+                                                            3 bits for subpriority */
+#define NVIC_PriorityGroup_2         ((uint32_t)0x500) /*!< 2 bits for pre-emption priority
+                                                            2 bits for subpriority */
+#define NVIC_PriorityGroup_3         ((uint32_t)0x400) /*!< 3 bits for pre-emption priority
+                                                            1 bits for subpriority */
+#define NVIC_PriorityGroup_4         ((uint32_t)0x300) /*!< 4 bits for pre-emption priority
+                                                            0 bits for subpriority */
+
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \
+                                       ((GROUP) == NVIC_PriorityGroup_1) || \
+                                       ((GROUP) == NVIC_PriorityGroup_2) || \
+                                       ((GROUP) == NVIC_PriorityGroup_3) || \
+                                       ((GROUP) == NVIC_PriorityGroup_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY)  ((PRIORITY) < 0x10)
+
+#define IS_NVIC_OFFSET(OFFSET)  ((OFFSET) < 0x000FFFFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup SysTick_clock_source 
+  * @{
+  */
+
+#define SysTick_CLKSource_HCLK_Div8    ((uint32_t)0xFFFFFFFB)
+#define SysTick_CLKSource_HCLK         ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \
+                                       ((SOURCE) == SysTick_CLKSource_HCLK_Div8))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup MISC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup MISC_Exported_Functions
+  * @{
+  */
+
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup);
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct);
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset);
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState);
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MISC_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_adc.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_adc.h
new file mode 100644
index 0000000000000000000000000000000000000000..d1b2653a66e0a6644bcabb8828b695433098be32
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_adc.h
@@ -0,0 +1,483 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_adc.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the ADC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_ADC_H
+#define __STM32F10x_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup ADC
+  * @{
+  */
+
+/** @defgroup ADC_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  ADC Init structure definition  
+  */
+
+typedef struct
+{
+  uint32_t ADC_Mode;                      /*!< Configures the ADC to operate in independent or
+                                               dual mode. 
+                                               This parameter can be a value of @ref ADC_mode */
+
+  FunctionalState ADC_ScanConvMode;       /*!< Specifies whether the conversion is performed in
+                                               Scan (multichannels) or Single (one channel) mode.
+                                               This parameter can be set to ENABLE or DISABLE */
+
+  FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in
+                                               Continuous or Single mode.
+                                               This parameter can be set to ENABLE or DISABLE. */
+
+  uint32_t ADC_ExternalTrigConv;          /*!< Defines the external trigger used to start the analog
+                                               to digital conversion of regular channels. This parameter
+                                               can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */
+
+  uint32_t ADC_DataAlign;                 /*!< Specifies whether the ADC data alignment is left or right.
+                                               This parameter can be a value of @ref ADC_data_align */
+
+  uint8_t ADC_NbrOfChannel;               /*!< Specifies the number of ADC channels that will be converted
+                                               using the sequencer for regular channel group.
+                                               This parameter must range from 1 to 16. */
+}ADC_InitTypeDef;
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Exported_Constants
+  * @{
+  */
+
+#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \
+                                   ((PERIPH) == ADC2) || \
+                                   ((PERIPH) == ADC3))
+
+#define IS_ADC_DMA_PERIPH(PERIPH) (((PERIPH) == ADC1) || \
+                                   ((PERIPH) == ADC3))
+
+/** @defgroup ADC_mode 
+  * @{
+  */
+
+#define ADC_Mode_Independent                       ((uint32_t)0x00000000)
+#define ADC_Mode_RegInjecSimult                    ((uint32_t)0x00010000)
+#define ADC_Mode_RegSimult_AlterTrig               ((uint32_t)0x00020000)
+#define ADC_Mode_InjecSimult_FastInterl            ((uint32_t)0x00030000)
+#define ADC_Mode_InjecSimult_SlowInterl            ((uint32_t)0x00040000)
+#define ADC_Mode_InjecSimult                       ((uint32_t)0x00050000)
+#define ADC_Mode_RegSimult                         ((uint32_t)0x00060000)
+#define ADC_Mode_FastInterl                        ((uint32_t)0x00070000)
+#define ADC_Mode_SlowInterl                        ((uint32_t)0x00080000)
+#define ADC_Mode_AlterTrig                         ((uint32_t)0x00090000)
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \
+                           ((MODE) == ADC_Mode_RegInjecSimult) || \
+                           ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \
+                           ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \
+                           ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \
+                           ((MODE) == ADC_Mode_InjecSimult) || \
+                           ((MODE) == ADC_Mode_RegSimult) || \
+                           ((MODE) == ADC_Mode_FastInterl) || \
+                           ((MODE) == ADC_Mode_SlowInterl) || \
+                           ((MODE) == ADC_Mode_AlterTrig))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_external_trigger_sources_for_regular_channels_conversion 
+  * @{
+  */
+
+#define ADC_ExternalTrigConv_T1_CC1                ((uint32_t)0x00000000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T1_CC2                ((uint32_t)0x00020000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T2_CC2                ((uint32_t)0x00060000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T3_TRGO               ((uint32_t)0x00080000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_T4_CC4                ((uint32_t)0x000A0000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO    ((uint32_t)0x000C0000) /*!< For ADC1 and ADC2 */
+
+#define ADC_ExternalTrigConv_T1_CC3                ((uint32_t)0x00040000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigConv_None                  ((uint32_t)0x000E0000) /*!< For ADC1, ADC2 and ADC3 */
+
+#define ADC_ExternalTrigConv_T3_CC1                ((uint32_t)0x00000000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T2_CC3                ((uint32_t)0x00020000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T8_CC1                ((uint32_t)0x00060000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T8_TRGO               ((uint32_t)0x00080000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T5_CC1                ((uint32_t)0x000A0000) /*!< For ADC3 only */
+#define ADC_ExternalTrigConv_T5_CC3                ((uint32_t)0x000C0000) /*!< For ADC3 only */
+
+#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_None) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \
+                                  ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_data_align 
+  * @{
+  */
+
+#define ADC_DataAlign_Right                        ((uint32_t)0x00000000)
+#define ADC_DataAlign_Left                         ((uint32_t)0x00000800)
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \
+                                  ((ALIGN) == ADC_DataAlign_Left))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_channels 
+  * @{
+  */
+
+#define ADC_Channel_0                               ((uint8_t)0x00)
+#define ADC_Channel_1                               ((uint8_t)0x01)
+#define ADC_Channel_2                               ((uint8_t)0x02)
+#define ADC_Channel_3                               ((uint8_t)0x03)
+#define ADC_Channel_4                               ((uint8_t)0x04)
+#define ADC_Channel_5                               ((uint8_t)0x05)
+#define ADC_Channel_6                               ((uint8_t)0x06)
+#define ADC_Channel_7                               ((uint8_t)0x07)
+#define ADC_Channel_8                               ((uint8_t)0x08)
+#define ADC_Channel_9                               ((uint8_t)0x09)
+#define ADC_Channel_10                              ((uint8_t)0x0A)
+#define ADC_Channel_11                              ((uint8_t)0x0B)
+#define ADC_Channel_12                              ((uint8_t)0x0C)
+#define ADC_Channel_13                              ((uint8_t)0x0D)
+#define ADC_Channel_14                              ((uint8_t)0x0E)
+#define ADC_Channel_15                              ((uint8_t)0x0F)
+#define ADC_Channel_16                              ((uint8_t)0x10)
+#define ADC_Channel_17                              ((uint8_t)0x11)
+
+#define ADC_Channel_TempSensor                      ((uint8_t)ADC_Channel_16)
+#define ADC_Channel_Vrefint                         ((uint8_t)ADC_Channel_17)
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \
+                                 ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \
+                                 ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \
+                                 ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \
+                                 ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \
+                                 ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \
+                                 ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \
+                                 ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \
+                                 ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_sampling_time 
+  * @{
+  */
+
+#define ADC_SampleTime_1Cycles5                    ((uint8_t)0x00)
+#define ADC_SampleTime_7Cycles5                    ((uint8_t)0x01)
+#define ADC_SampleTime_13Cycles5                   ((uint8_t)0x02)
+#define ADC_SampleTime_28Cycles5                   ((uint8_t)0x03)
+#define ADC_SampleTime_41Cycles5                   ((uint8_t)0x04)
+#define ADC_SampleTime_55Cycles5                   ((uint8_t)0x05)
+#define ADC_SampleTime_71Cycles5                   ((uint8_t)0x06)
+#define ADC_SampleTime_239Cycles5                  ((uint8_t)0x07)
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_7Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_13Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_28Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_41Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_55Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_71Cycles5) || \
+                                  ((TIME) == ADC_SampleTime_239Cycles5))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_external_trigger_sources_for_injected_channels_conversion 
+  * @{
+  */
+
+#define ADC_ExternalTrigInjecConv_T2_TRGO           ((uint32_t)0x00002000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T2_CC1            ((uint32_t)0x00003000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T3_CC4            ((uint32_t)0x00004000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_T4_TRGO           ((uint32_t)0x00005000) /*!< For ADC1 and ADC2 */
+#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000) /*!< For ADC1 and ADC2 */
+
+#define ADC_ExternalTrigInjecConv_T1_TRGO           ((uint32_t)0x00000000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigInjecConv_T1_CC4            ((uint32_t)0x00001000) /*!< For ADC1, ADC2 and ADC3 */
+#define ADC_ExternalTrigInjecConv_None              ((uint32_t)0x00007000) /*!< For ADC1, ADC2 and ADC3 */
+
+#define ADC_ExternalTrigInjecConv_T4_CC3            ((uint32_t)0x00002000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T8_CC2            ((uint32_t)0x00003000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T8_CC4            ((uint32_t)0x00004000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T5_TRGO           ((uint32_t)0x00005000) /*!< For ADC3 only */
+#define ADC_ExternalTrigInjecConv_T5_CC4            ((uint32_t)0x00006000) /*!< For ADC3 only */
+
+#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \
+                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_injected_channel_selection 
+  * @{
+  */
+
+#define ADC_InjectedChannel_1                       ((uint8_t)0x14)
+#define ADC_InjectedChannel_2                       ((uint8_t)0x18)
+#define ADC_InjectedChannel_3                       ((uint8_t)0x1C)
+#define ADC_InjectedChannel_4                       ((uint8_t)0x20)
+#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \
+                                          ((CHANNEL) == ADC_InjectedChannel_2) || \
+                                          ((CHANNEL) == ADC_InjectedChannel_3) || \
+                                          ((CHANNEL) == ADC_InjectedChannel_4))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_analog_watchdog_selection 
+  * @{
+  */
+
+#define ADC_AnalogWatchdog_SingleRegEnable         ((uint32_t)0x00800200)
+#define ADC_AnalogWatchdog_SingleInjecEnable       ((uint32_t)0x00400200)
+#define ADC_AnalogWatchdog_SingleRegOrInjecEnable  ((uint32_t)0x00C00200)
+#define ADC_AnalogWatchdog_AllRegEnable            ((uint32_t)0x00800000)
+#define ADC_AnalogWatchdog_AllInjecEnable          ((uint32_t)0x00400000)
+#define ADC_AnalogWatchdog_AllRegAllInjecEnable    ((uint32_t)0x00C00000)
+#define ADC_AnalogWatchdog_None                    ((uint32_t)0x00000000)
+
+#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \
+                                          ((WATCHDOG) == ADC_AnalogWatchdog_None))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_interrupts_definition 
+  * @{
+  */
+
+#define ADC_IT_EOC                                 ((uint16_t)0x0220)
+#define ADC_IT_AWD                                 ((uint16_t)0x0140)
+#define ADC_IT_JEOC                                ((uint16_t)0x0480)
+
+#define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xF81F) == 0x00) && ((IT) != 0x00))
+
+#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \
+                           ((IT) == ADC_IT_JEOC))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_flags_definition 
+  * @{
+  */
+
+#define ADC_FLAG_AWD                               ((uint8_t)0x01)
+#define ADC_FLAG_EOC                               ((uint8_t)0x02)
+#define ADC_FLAG_JEOC                              ((uint8_t)0x04)
+#define ADC_FLAG_JSTRT                             ((uint8_t)0x08)
+#define ADC_FLAG_STRT                              ((uint8_t)0x10)
+#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xE0) == 0x00) && ((FLAG) != 0x00))
+#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \
+                               ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \
+                               ((FLAG) == ADC_FLAG_STRT))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_thresholds 
+  * @{
+  */
+
+#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_injected_offset 
+  * @{
+  */
+
+#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_injected_length 
+  * @{
+  */
+
+#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4))
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_injected_rank 
+  * @{
+  */
+
+#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4))
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup ADC_regular_length 
+  * @{
+  */
+
+#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10))
+/**
+  * @}
+  */
+
+/** @defgroup ADC_regular_rank 
+  * @{
+  */
+
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10))
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_regular_discontinuous_mode_number 
+  * @{
+  */
+
+#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Exported_Functions
+  * @{
+  */
+
+void ADC_DeInit(ADC_TypeDef* ADCx);
+void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct);
+void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct);
+void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState);
+void ADC_ResetCalibration(ADC_TypeDef* ADCx);
+FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx);
+void ADC_StartCalibration(ADC_TypeDef* ADCx);
+FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx);
+void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx);
+void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number);
+void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
+void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx);
+uint32_t ADC_GetDualModeConversionValue(void);
+void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv);
+void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
+FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx);
+void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime);
+void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length);
+void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset);
+uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel);
+void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog);
+void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, uint16_t LowThreshold);
+void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel);
+void ADC_TempSensorVrefintCmd(FunctionalState NewState);
+FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
+void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG);
+ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT);
+void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_ADC_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_bkp.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_bkp.h
new file mode 100644
index 0000000000000000000000000000000000000000..b620753eff8d56b0fba3752f68e698f4fca02923
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_bkp.h
@@ -0,0 +1,195 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_bkp.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the BKP firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_BKP_H
+#define __STM32F10x_BKP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup BKP
+  * @{
+  */
+
+/** @defgroup BKP_Exported_Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup BKP_Exported_Constants
+  * @{
+  */
+
+/** @defgroup Tamper_Pin_active_level 
+  * @{
+  */
+
+#define BKP_TamperPinLevel_High           ((uint16_t)0x0000)
+#define BKP_TamperPinLevel_Low            ((uint16_t)0x0001)
+#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \
+                                        ((LEVEL) == BKP_TamperPinLevel_Low))
+/**
+  * @}
+  */
+
+/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin 
+  * @{
+  */
+
+#define BKP_RTCOutputSource_None          ((uint16_t)0x0000)
+#define BKP_RTCOutputSource_CalibClock    ((uint16_t)0x0080)
+#define BKP_RTCOutputSource_Alarm         ((uint16_t)0x0100)
+#define BKP_RTCOutputSource_Second        ((uint16_t)0x0300)
+#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \
+                                          ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \
+                                          ((SOURCE) == BKP_RTCOutputSource_Alarm) || \
+                                          ((SOURCE) == BKP_RTCOutputSource_Second))
+/**
+  * @}
+  */
+
+/** @defgroup Data_Backup_Register 
+  * @{
+  */
+
+#define BKP_DR1                           ((uint16_t)0x0004)
+#define BKP_DR2                           ((uint16_t)0x0008)
+#define BKP_DR3                           ((uint16_t)0x000C)
+#define BKP_DR4                           ((uint16_t)0x0010)
+#define BKP_DR5                           ((uint16_t)0x0014)
+#define BKP_DR6                           ((uint16_t)0x0018)
+#define BKP_DR7                           ((uint16_t)0x001C)
+#define BKP_DR8                           ((uint16_t)0x0020)
+#define BKP_DR9                           ((uint16_t)0x0024)
+#define BKP_DR10                          ((uint16_t)0x0028)
+#define BKP_DR11                          ((uint16_t)0x0040)
+#define BKP_DR12                          ((uint16_t)0x0044)
+#define BKP_DR13                          ((uint16_t)0x0048)
+#define BKP_DR14                          ((uint16_t)0x004C)
+#define BKP_DR15                          ((uint16_t)0x0050)
+#define BKP_DR16                          ((uint16_t)0x0054)
+#define BKP_DR17                          ((uint16_t)0x0058)
+#define BKP_DR18                          ((uint16_t)0x005C)
+#define BKP_DR19                          ((uint16_t)0x0060)
+#define BKP_DR20                          ((uint16_t)0x0064)
+#define BKP_DR21                          ((uint16_t)0x0068)
+#define BKP_DR22                          ((uint16_t)0x006C)
+#define BKP_DR23                          ((uint16_t)0x0070)
+#define BKP_DR24                          ((uint16_t)0x0074)
+#define BKP_DR25                          ((uint16_t)0x0078)
+#define BKP_DR26                          ((uint16_t)0x007C)
+#define BKP_DR27                          ((uint16_t)0x0080)
+#define BKP_DR28                          ((uint16_t)0x0084)
+#define BKP_DR29                          ((uint16_t)0x0088)
+#define BKP_DR30                          ((uint16_t)0x008C)
+#define BKP_DR31                          ((uint16_t)0x0090)
+#define BKP_DR32                          ((uint16_t)0x0094)
+#define BKP_DR33                          ((uint16_t)0x0098)
+#define BKP_DR34                          ((uint16_t)0x009C)
+#define BKP_DR35                          ((uint16_t)0x00A0)
+#define BKP_DR36                          ((uint16_t)0x00A4)
+#define BKP_DR37                          ((uint16_t)0x00A8)
+#define BKP_DR38                          ((uint16_t)0x00AC)
+#define BKP_DR39                          ((uint16_t)0x00B0)
+#define BKP_DR40                          ((uint16_t)0x00B4)
+#define BKP_DR41                          ((uint16_t)0x00B8)
+#define BKP_DR42                          ((uint16_t)0x00BC)
+
+#define IS_BKP_DR(DR) (((DR) == BKP_DR1)  || ((DR) == BKP_DR2)  || ((DR) == BKP_DR3)  || \
+                       ((DR) == BKP_DR4)  || ((DR) == BKP_DR5)  || ((DR) == BKP_DR6)  || \
+                       ((DR) == BKP_DR7)  || ((DR) == BKP_DR8)  || ((DR) == BKP_DR9)  || \
+                       ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \
+                       ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \
+                       ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \
+                       ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \
+                       ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \
+                       ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \
+                       ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \
+                       ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \
+                       ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \
+                       ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \
+                       ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42))
+
+#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup BKP_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup BKP_Exported_Functions
+  * @{
+  */
+
+void BKP_DeInit(void);
+void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel);
+void BKP_TamperPinCmd(FunctionalState NewState);
+void BKP_ITConfig(FunctionalState NewState);
+void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource);
+void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue);
+void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data);
+uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR);
+FlagStatus BKP_GetFlagStatus(void);
+void BKP_ClearFlag(void);
+ITStatus BKP_GetITStatus(void);
+void BKP_ClearITPendingBit(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_BKP_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_can.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_can.h
new file mode 100644
index 0000000000000000000000000000000000000000..648f747cdc8d8fffb9f2de6695cd77252197d7f5
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_can.h
@@ -0,0 +1,697 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_can.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the CAN firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CAN_H
+#define __STM32F10x_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup CAN
+  * @{
+  */
+
+/** @defgroup CAN_Exported_Types
+  * @{
+  */
+
+#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \
+                                   ((PERIPH) == CAN2))
+
+/** 
+  * @brief  CAN init structure definition
+  */
+
+typedef struct
+{
+  uint16_t CAN_Prescaler;   /*!< Specifies the length of a time quantum. 
+                                 It ranges from 1 to 1024. */
+  
+  uint8_t CAN_Mode;         /*!< Specifies the CAN operating mode.
+                                 This parameter can be a value of 
+                                @ref CAN_operating_mode */
+
+  uint8_t CAN_SJW;          /*!< Specifies the maximum number of time quanta 
+                                 the CAN hardware is allowed to lengthen or 
+                                 shorten a bit to perform resynchronization.
+                                 This parameter can be a value of 
+                                 @ref CAN_synchronisation_jump_width */
+
+  uint8_t CAN_BS1;          /*!< Specifies the number of time quanta in Bit 
+                                 Segment 1. This parameter can be a value of 
+                                 @ref CAN_time_quantum_in_bit_segment_1 */
+
+  uint8_t CAN_BS2;          /*!< Specifies the number of time quanta in Bit 
+                                 Segment 2.
+                                 This parameter can be a value of 
+                                 @ref CAN_time_quantum_in_bit_segment_2 */
+  
+  FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered 
+                                 communication mode. This parameter can be set 
+                                 either to ENABLE or DISABLE. */
+  
+  FunctionalState CAN_ABOM;  /*!< Enable or disable the automatic bus-off 
+                                  management. This parameter can be set either 
+                                  to ENABLE or DISABLE. */
+
+  FunctionalState CAN_AWUM;  /*!< Enable or disable the automatic wake-up mode. 
+                                  This parameter can be set either to ENABLE or 
+                                  DISABLE. */
+
+  FunctionalState CAN_NART;  /*!< Enable or disable the no-automatic 
+                                  retransmission mode. This parameter can be 
+                                  set either to ENABLE or DISABLE. */
+
+  FunctionalState CAN_RFLM;  /*!< Enable or disable the Receive FIFO Locked mode.
+                                  This parameter can be set either to ENABLE 
+                                  or DISABLE. */
+
+  FunctionalState CAN_TXFP;  /*!< Enable or disable the transmit FIFO priority.
+                                  This parameter can be set either to ENABLE 
+                                  or DISABLE. */
+} CAN_InitTypeDef;
+
+/** 
+  * @brief  CAN filter init structure definition
+  */
+
+typedef struct
+{
+  uint16_t CAN_FilterIdHigh;         /*!< Specifies the filter identification number (MSBs for a 32-bit
+                                              configuration, first one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterIdLow;          /*!< Specifies the filter identification number (LSBs for a 32-bit
+                                              configuration, second one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterMaskIdHigh;     /*!< Specifies the filter mask number or identification number,
+                                              according to the mode (MSBs for a 32-bit configuration,
+                                              first one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterMaskIdLow;      /*!< Specifies the filter mask number or identification number,
+                                              according to the mode (LSBs for a 32-bit configuration,
+                                              second one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+                                              This parameter can be a value of @ref CAN_filter_FIFO */
+  
+  uint8_t CAN_FilterNumber;          /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */
+
+  uint8_t CAN_FilterMode;            /*!< Specifies the filter mode to be initialized.
+                                              This parameter can be a value of @ref CAN_filter_mode */
+
+  uint8_t CAN_FilterScale;           /*!< Specifies the filter scale.
+                                              This parameter can be a value of @ref CAN_filter_scale */
+
+  FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter.
+                                              This parameter can be set either to ENABLE or DISABLE. */
+} CAN_FilterInitTypeDef;
+
+/** 
+  * @brief  CAN Tx message structure definition  
+  */
+
+typedef struct
+{
+  uint32_t StdId;  /*!< Specifies the standard identifier.
+                        This parameter can be a value between 0 to 0x7FF. */
+
+  uint32_t ExtId;  /*!< Specifies the extended identifier.
+                        This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+  uint8_t IDE;     /*!< Specifies the type of identifier for the message that 
+                        will be transmitted. This parameter can be a value 
+                        of @ref CAN_identifier_type */
+
+  uint8_t RTR;     /*!< Specifies the type of frame for the message that will 
+                        be transmitted. This parameter can be a value of 
+                        @ref CAN_remote_transmission_request */
+
+  uint8_t DLC;     /*!< Specifies the length of the frame that will be 
+                        transmitted. This parameter can be a value between 
+                        0 to 8 */
+
+  uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 
+                        to 0xFF. */
+} CanTxMsg;
+
+/** 
+  * @brief  CAN Rx message structure definition  
+  */
+
+typedef struct
+{
+  uint32_t StdId;  /*!< Specifies the standard identifier.
+                        This parameter can be a value between 0 to 0x7FF. */
+
+  uint32_t ExtId;  /*!< Specifies the extended identifier.
+                        This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+  uint8_t IDE;     /*!< Specifies the type of identifier for the message that 
+                        will be received. This parameter can be a value of 
+                        @ref CAN_identifier_type */
+
+  uint8_t RTR;     /*!< Specifies the type of frame for the received message.
+                        This parameter can be a value of 
+                        @ref CAN_remote_transmission_request */
+
+  uint8_t DLC;     /*!< Specifies the length of the frame that will be received.
+                        This parameter can be a value between 0 to 8 */
+
+  uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to 
+                        0xFF. */
+
+  uint8_t FMI;     /*!< Specifies the index of the filter the message stored in 
+                        the mailbox passes through. This parameter can be a 
+                        value between 0 to 0xFF */
+} CanRxMsg;
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Exported_Constants
+  * @{
+  */
+
+/** @defgroup CAN_sleep_constants 
+  * @{
+  */
+
+#define CAN_InitStatus_Failed              ((uint8_t)0x00) /*!< CAN initialization failed */
+#define CAN_InitStatus_Success             ((uint8_t)0x01) /*!< CAN initialization OK */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Mode 
+  * @{
+  */
+
+#define CAN_Mode_Normal             ((uint8_t)0x00)  /*!< normal mode */
+#define CAN_Mode_LoopBack           ((uint8_t)0x01)  /*!< loopback mode */
+#define CAN_Mode_Silent             ((uint8_t)0x02)  /*!< silent mode */
+#define CAN_Mode_Silent_LoopBack    ((uint8_t)0x03)  /*!< loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \
+                           ((MODE) == CAN_Mode_LoopBack)|| \
+                           ((MODE) == CAN_Mode_Silent) || \
+                           ((MODE) == CAN_Mode_Silent_LoopBack))
+/**
+  * @}
+  */
+
+
+/**
+  * @defgroup CAN_Operating_Mode 
+  * @{
+  */  
+#define CAN_OperatingMode_Initialization  ((uint8_t)0x00) /*!< Initialization mode */
+#define CAN_OperatingMode_Normal          ((uint8_t)0x01) /*!< Normal mode */
+#define CAN_OperatingMode_Sleep           ((uint8_t)0x02) /*!< sleep mode */
+
+
+#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\
+                                    ((MODE) == CAN_OperatingMode_Normal)|| \
+																		((MODE) == CAN_OperatingMode_Sleep))
+/**
+  * @}
+  */
+  
+/**
+  * @defgroup CAN_Mode_Status
+  * @{
+  */  
+
+#define CAN_ModeStatus_Failed    ((uint8_t)0x00)                /*!< CAN entering the specific mode failed */
+#define CAN_ModeStatus_Success   ((uint8_t)!CAN_ModeStatus_Failed)   /*!< CAN entering the specific mode Succeed */
+
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_synchronisation_jump_width 
+  * @{
+  */
+
+#define CAN_SJW_1tq                 ((uint8_t)0x00)  /*!< 1 time quantum */
+#define CAN_SJW_2tq                 ((uint8_t)0x01)  /*!< 2 time quantum */
+#define CAN_SJW_3tq                 ((uint8_t)0x02)  /*!< 3 time quantum */
+#define CAN_SJW_4tq                 ((uint8_t)0x03)  /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \
+                         ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 
+  * @{
+  */
+
+#define CAN_BS1_1tq                 ((uint8_t)0x00)  /*!< 1 time quantum */
+#define CAN_BS1_2tq                 ((uint8_t)0x01)  /*!< 2 time quantum */
+#define CAN_BS1_3tq                 ((uint8_t)0x02)  /*!< 3 time quantum */
+#define CAN_BS1_4tq                 ((uint8_t)0x03)  /*!< 4 time quantum */
+#define CAN_BS1_5tq                 ((uint8_t)0x04)  /*!< 5 time quantum */
+#define CAN_BS1_6tq                 ((uint8_t)0x05)  /*!< 6 time quantum */
+#define CAN_BS1_7tq                 ((uint8_t)0x06)  /*!< 7 time quantum */
+#define CAN_BS1_8tq                 ((uint8_t)0x07)  /*!< 8 time quantum */
+#define CAN_BS1_9tq                 ((uint8_t)0x08)  /*!< 9 time quantum */
+#define CAN_BS1_10tq                ((uint8_t)0x09)  /*!< 10 time quantum */
+#define CAN_BS1_11tq                ((uint8_t)0x0A)  /*!< 11 time quantum */
+#define CAN_BS1_12tq                ((uint8_t)0x0B)  /*!< 12 time quantum */
+#define CAN_BS1_13tq                ((uint8_t)0x0C)  /*!< 13 time quantum */
+#define CAN_BS1_14tq                ((uint8_t)0x0D)  /*!< 14 time quantum */
+#define CAN_BS1_15tq                ((uint8_t)0x0E)  /*!< 15 time quantum */
+#define CAN_BS1_16tq                ((uint8_t)0x0F)  /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq)
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 
+  * @{
+  */
+
+#define CAN_BS2_1tq                 ((uint8_t)0x00)  /*!< 1 time quantum */
+#define CAN_BS2_2tq                 ((uint8_t)0x01)  /*!< 2 time quantum */
+#define CAN_BS2_3tq                 ((uint8_t)0x02)  /*!< 3 time quantum */
+#define CAN_BS2_4tq                 ((uint8_t)0x03)  /*!< 4 time quantum */
+#define CAN_BS2_5tq                 ((uint8_t)0x04)  /*!< 5 time quantum */
+#define CAN_BS2_6tq                 ((uint8_t)0x05)  /*!< 6 time quantum */
+#define CAN_BS2_7tq                 ((uint8_t)0x06)  /*!< 7 time quantum */
+#define CAN_BS2_8tq                 ((uint8_t)0x07)  /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq)
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_clock_prescaler 
+  * @{
+  */
+
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_number 
+  * @{
+  */
+#ifndef STM32F10X_CL
+  #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13)
+#else
+  #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+#endif /* STM32F10X_CL */ 
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_mode 
+  * @{
+  */
+
+#define CAN_FilterMode_IdMask       ((uint8_t)0x00)  /*!< identifier/mask mode */
+#define CAN_FilterMode_IdList       ((uint8_t)0x01)  /*!< identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \
+                                  ((MODE) == CAN_FilterMode_IdList))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_scale 
+  * @{
+  */
+
+#define CAN_FilterScale_16bit       ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FilterScale_32bit       ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \
+                                    ((SCALE) == CAN_FilterScale_32bit))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_FIFO
+  * @{
+  */
+
+#define CAN_Filter_FIFO0             ((uint8_t)0x00)  /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_Filter_FIFO1             ((uint8_t)0x01)  /*!< Filter FIFO 1 assignment for filter x */
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \
+                                  ((FIFO) == CAN_FilterFIFO1))
+/**
+  * @}
+  */
+
+/** @defgroup Start_bank_filter_for_slave_CAN 
+  * @{
+  */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Tx 
+  * @{
+  */
+
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID)   ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID)   ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC)       ((DLC) <= ((uint8_t)0x08))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_identifier_type 
+  * @{
+  */
+
+#define CAN_Id_Standard             ((uint32_t)0x00000000)  /*!< Standard Id */
+#define CAN_Id_Extended             ((uint32_t)0x00000004)  /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \
+                               ((IDTYPE) == CAN_Id_Extended))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_remote_transmission_request 
+  * @{
+  */
+
+#define CAN_RTR_Data                ((uint32_t)0x00000000)  /*!< Data frame */
+#define CAN_RTR_Remote              ((uint32_t)0x00000002)  /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_transmit_constants 
+  * @{
+  */
+
+#define CAN_TxStatus_Failed         ((uint8_t)0x00)/*!< CAN transmission failed */
+#define CAN_TxStatus_Ok             ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TxStatus_Pending        ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TxStatus_NoMailBox      ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_receive_FIFO_number_constants 
+  * @{
+  */
+
+#define CAN_FIFO0                 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1                 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_sleep_constants 
+  * @{
+  */
+
+#define CAN_Sleep_Failed     ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */
+#define CAN_Sleep_Ok         ((uint8_t)0x01) /*!< CAN entered the sleep mode */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_wake_up_constants 
+  * @{
+  */
+
+#define CAN_WakeUp_Failed        ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */
+#define CAN_WakeUp_Ok            ((uint8_t)0x01) /*!< CAN leaved the sleep mode */
+
+/**
+  * @}
+  */
+
+/**
+  * @defgroup   CAN_Error_Code_constants
+  * @{
+  */  
+                                                                
+#define CAN_ErrorCode_NoErr           ((uint8_t)0x00) /*!< No Error */ 
+#define	CAN_ErrorCode_StuffErr        ((uint8_t)0x10) /*!< Stuff Error */ 
+#define	CAN_ErrorCode_FormErr         ((uint8_t)0x20) /*!< Form Error */ 
+#define	CAN_ErrorCode_ACKErr          ((uint8_t)0x30) /*!< Acknowledgment Error */ 
+#define	CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ 
+#define	CAN_ErrorCode_BitDominantErr  ((uint8_t)0x50) /*!< Bit Dominant Error */ 
+#define	CAN_ErrorCode_CRCErr          ((uint8_t)0x60) /*!< CRC Error  */ 
+#define	CAN_ErrorCode_SoftwareSetErr  ((uint8_t)0x70) /*!< Software Set Error */ 
+
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_flags 
+  * @{
+  */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+   and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with CAN_GetFlagStatus() function.  */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0             ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */
+#define CAN_FLAG_RQCP1             ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */
+#define CAN_FLAG_RQCP2             ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FMP0              ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */
+#define CAN_FLAG_FF0               ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag            */
+#define CAN_FLAG_FOV0              ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag         */
+#define CAN_FLAG_FMP1              ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */
+#define CAN_FLAG_FF1               ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag            */
+#define CAN_FLAG_FOV1              ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag         */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU               ((uint32_t)0x31000008) /*!< Wake up Flag */
+#define CAN_FLAG_SLAK              ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */
+/* Note: When SLAK intterupt is disabled (SLKIE=0), no polling on SLAKI is possible. 
+         In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG               ((uint32_t)0x10F00001) /*!< Error Warning Flag   */
+#define CAN_FLAG_EPV               ((uint32_t)0x10F00002) /*!< Error Passive Flag   */
+#define CAN_FLAG_BOF               ((uint32_t)0x10F00004) /*!< Bus-Off Flag         */
+#define CAN_FLAG_LEC               ((uint32_t)0x30F00070) /*!< Last error code Flag */
+
+#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC)  || ((FLAG) == CAN_FLAG_BOF)   || \
+                               ((FLAG) == CAN_FLAG_EPV)  || ((FLAG) == CAN_FLAG_EWG)   || \
+                               ((FLAG) == CAN_FLAG_WKU)  || ((FLAG) == CAN_FLAG_FOV0)  || \
+                               ((FLAG) == CAN_FLAG_FF0)  || ((FLAG) == CAN_FLAG_FMP0)  || \
+                               ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1)   || \
+                               ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \
+                               ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \
+                               ((FLAG) == CAN_FLAG_SLAK ))
+
+#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \
+                                ((FLAG) == CAN_FLAG_RQCP1)  || ((FLAG) == CAN_FLAG_RQCP0) || \
+                                ((FLAG) == CAN_FLAG_FF0)  || ((FLAG) == CAN_FLAG_FOV0) ||\
+                                ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \
+                                ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK))
+/**
+  * @}
+  */
+
+  
+/** @defgroup CAN_interrupts 
+  * @{
+  */
+
+
+  
+#define CAN_IT_TME                  ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0                 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/
+#define CAN_IT_FF0                  ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/
+#define CAN_IT_FOV0                 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/
+#define CAN_IT_FMP1                 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/
+#define CAN_IT_FF1                  ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/
+#define CAN_IT_FOV1                 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU                  ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/
+#define CAN_IT_SLK                  ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/
+
+/* Error Interrupts */
+#define CAN_IT_EWG                  ((uint32_t)0x00000100) /*!< Error warning Interrupt*/
+#define CAN_IT_EPV                  ((uint32_t)0x00000200) /*!< Error passive Interrupt*/
+#define CAN_IT_BOF                  ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/
+#define CAN_IT_LEC                  ((uint32_t)0x00000800) /*!< Last error code Interrupt*/
+#define CAN_IT_ERR                  ((uint32_t)0x00008000) /*!< Error Interrupt*/
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0   CAN_IT_TME
+#define CAN_IT_RQCP1   CAN_IT_TME
+#define CAN_IT_RQCP2   CAN_IT_TME
+
+
+#define IS_CAN_IT(IT)        (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0)  ||\
+                             ((IT) == CAN_IT_FF0)  || ((IT) == CAN_IT_FOV0)  ||\
+                             ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1)   ||\
+                             ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG)   ||\
+                             ((IT) == CAN_IT_EPV)  || ((IT) == CAN_IT_BOF)   ||\
+                             ((IT) == CAN_IT_LEC)  || ((IT) == CAN_IT_ERR)   ||\
+                             ((IT) == CAN_IT_WKU)  || ((IT) == CAN_IT_SLK))
+
+#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0)    ||\
+                             ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1)    ||\
+                             ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG)    ||\
+                             ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF)    ||\
+                             ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR)    ||\
+                             ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Legacy 
+  * @{
+  */
+#define CANINITFAILED               CAN_InitStatus_Failed
+#define CANINITOK                   CAN_InitStatus_Success
+#define CAN_FilterFIFO0             CAN_Filter_FIFO0
+#define CAN_FilterFIFO1             CAN_Filter_FIFO1
+#define CAN_ID_STD                  CAN_Id_Standard           
+#define CAN_ID_EXT                  CAN_Id_Extended
+#define CAN_RTR_DATA                CAN_RTR_Data         
+#define CAN_RTR_REMOTE              CAN_RTR_Remote
+#define CANTXFAILE                  CAN_TxStatus_Failed
+#define CANTXOK                     CAN_TxStatus_Ok
+#define CANTXPENDING                CAN_TxStatus_Pending
+#define CAN_NO_MB                   CAN_TxStatus_NoMailBox
+#define CANSLEEPFAILED              CAN_Sleep_Failed
+#define CANSLEEPOK                  CAN_Sleep_Ok
+#define CANWAKEUPFAILED             CAN_WakeUp_Failed        
+#define CANWAKEUPOK                 CAN_WakeUp_Ok        
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Exported_Functions
+  * @{
+  */
+/*  Function used to set the CAN configuration to the default reset state *****/ 
+void CAN_DeInit(CAN_TypeDef* CANx);
+
+/* Initialization and Configuration functions *********************************/ 
+uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct);
+void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct);
+void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct);
+void CAN_SlaveStartBank(uint8_t CAN_BankNumber); 
+void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState);
+void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState);
+
+/* Transmit functions *********************************************************/
+uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage);
+uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox);
+void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox);
+
+/* Receive functions **********************************************************/
+void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage);
+void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber);
+uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber);
+
+
+/* Operation modes functions **************************************************/
+uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode);
+uint8_t CAN_Sleep(CAN_TypeDef* CANx);
+uint8_t CAN_WakeUp(CAN_TypeDef* CANx);
+
+/* Error management functions *************************************************/
+uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx);
+uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx);
+uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx);
+
+/* Interrupts and flags management functions **********************************/
+void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState);
+FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT);
+void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CAN_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_cec.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_cec.h
new file mode 100644
index 0000000000000000000000000000000000000000..a3f8fc78535333a8c9314e7bc61a097943ec3276
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_cec.h
@@ -0,0 +1,210 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_cec.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the CEC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CEC_H
+#define __STM32F10x_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup CEC
+  * @{
+  */
+  
+
+/** @defgroup CEC_Exported_Types
+  * @{
+  */
+   
+/** 
+  * @brief  CEC Init structure definition  
+  */ 
+typedef struct
+{
+  uint16_t CEC_BitTimingMode; /*!< Configures the CEC Bit Timing Error Mode. 
+                               This parameter can be a value of @ref CEC_BitTiming_Mode */
+  uint16_t CEC_BitPeriodMode; /*!< Configures the CEC Bit Period Error Mode. 
+                               This parameter can be a value of @ref CEC_BitPeriod_Mode */
+}CEC_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Exported_Constants
+  * @{
+  */ 
+  
+/** @defgroup CEC_BitTiming_Mode 
+  * @{
+  */ 
+#define CEC_BitTimingStdMode                    ((uint16_t)0x00) /*!< Bit timing error Standard Mode */
+#define CEC_BitTimingErrFreeMode                CEC_CFGR_BTEM   /*!< Bit timing error Free Mode */
+
+#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BitTimingStdMode) || \
+                                            ((MODE) == CEC_BitTimingErrFreeMode))
+/**
+  * @}
+  */
+
+/** @defgroup CEC_BitPeriod_Mode 
+  * @{
+  */ 
+#define CEC_BitPeriodStdMode                    ((uint16_t)0x00) /*!< Bit period error Standard Mode */
+#define CEC_BitPeriodFlexibleMode                CEC_CFGR_BPEM   /*!< Bit period error Flexible Mode */
+
+#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BitPeriodStdMode) || \
+                                            ((MODE) == CEC_BitPeriodFlexibleMode))
+/**
+  * @}
+  */ 
+
+
+/** @defgroup CEC_interrupts_definition 
+  * @{
+  */ 
+#define CEC_IT_TERR                              CEC_CSR_TERR
+#define CEC_IT_TBTRF                             CEC_CSR_TBTRF
+#define CEC_IT_RERR                              CEC_CSR_RERR
+#define CEC_IT_RBTF                              CEC_CSR_RBTF
+#define IS_CEC_GET_IT(IT) (((IT) == CEC_IT_TERR) || ((IT) == CEC_IT_TBTRF) || \
+                           ((IT) == CEC_IT_RERR) || ((IT) == CEC_IT_RBTF))
+/**
+  * @}
+  */ 
+
+
+/** @defgroup CEC_Own_Address 
+  * @{
+  */ 
+#define IS_CEC_ADDRESS(ADDRESS) ((ADDRESS) < 0x10)
+/**
+  * @}
+  */ 
+
+/** @defgroup CEC_Prescaler 
+  * @{
+  */ 
+#define IS_CEC_PRESCALER(PRESCALER) ((PRESCALER) <= 0x3FFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup CEC_flags_definition 
+  * @{
+  */
+   
+/** 
+  * @brief  ESR register flags  
+  */ 
+#define CEC_FLAG_BTE                            ((uint32_t)0x10010000)
+#define CEC_FLAG_BPE                            ((uint32_t)0x10020000)
+#define CEC_FLAG_RBTFE                          ((uint32_t)0x10040000)
+#define CEC_FLAG_SBE                            ((uint32_t)0x10080000)
+#define CEC_FLAG_ACKE                           ((uint32_t)0x10100000)
+#define CEC_FLAG_LINE                           ((uint32_t)0x10200000)
+#define CEC_FLAG_TBTFE                          ((uint32_t)0x10400000)
+
+/** 
+  * @brief  CSR register flags  
+  */ 
+#define CEC_FLAG_TEOM                           ((uint32_t)0x00000002)  
+#define CEC_FLAG_TERR                           ((uint32_t)0x00000004)
+#define CEC_FLAG_TBTRF                          ((uint32_t)0x00000008)
+#define CEC_FLAG_RSOM                           ((uint32_t)0x00000010)
+#define CEC_FLAG_REOM                           ((uint32_t)0x00000020)
+#define CEC_FLAG_RERR                           ((uint32_t)0x00000040)
+#define CEC_FLAG_RBTF                           ((uint32_t)0x00000080)
+
+#define IS_CEC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFF03) == 0x00) && ((FLAG) != 0x00))
+                               
+#define IS_CEC_GET_FLAG(FLAG) (((FLAG) == CEC_FLAG_BTE) || ((FLAG) == CEC_FLAG_BPE) || \
+                               ((FLAG) == CEC_FLAG_RBTFE) || ((FLAG)== CEC_FLAG_SBE) || \
+                               ((FLAG) == CEC_FLAG_ACKE) || ((FLAG) == CEC_FLAG_LINE) || \
+                               ((FLAG) == CEC_FLAG_TBTFE) || ((FLAG) == CEC_FLAG_TEOM) || \
+                               ((FLAG) == CEC_FLAG_TERR) || ((FLAG) == CEC_FLAG_TBTRF) || \
+                               ((FLAG) == CEC_FLAG_RSOM) || ((FLAG) == CEC_FLAG_REOM) || \
+                               ((FLAG) == CEC_FLAG_RERR) || ((FLAG) == CEC_FLAG_RBTF))
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup CEC_Exported_Macros
+  * @{
+  */
+ 
+/**
+  * @}
+  */
+
+/** @defgroup CEC_Exported_Functions
+  * @{
+  */ 
+void CEC_DeInit(void);
+void CEC_Init(CEC_InitTypeDef* CEC_InitStruct);
+void CEC_Cmd(FunctionalState NewState);
+void CEC_ITConfig(FunctionalState NewState);
+void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress);
+void CEC_SetPrescaler(uint16_t CEC_Prescaler);
+void CEC_SendDataByte(uint8_t Data);
+uint8_t CEC_ReceiveDataByte(void);
+void CEC_StartOfMessage(void);
+void CEC_EndOfMessageCmd(FunctionalState NewState);
+FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG);
+void CEC_ClearFlag(uint32_t CEC_FLAG);
+ITStatus CEC_GetITStatus(uint8_t CEC_IT);
+void CEC_ClearITPendingBit(uint16_t CEC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CEC_H */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_crc.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_crc.h
new file mode 100644
index 0000000000000000000000000000000000000000..658a51cefdf144c7351795e67287a37a4919d5a9
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_crc.h
@@ -0,0 +1,94 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_crc.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the CRC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CRC_H
+#define __STM32F10x_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup CRC
+  * @{
+  */
+
+/** @defgroup CRC_Exported_Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Exported_Functions
+  * @{
+  */
+
+void CRC_ResetDR(void);
+uint32_t CRC_CalcCRC(uint32_t Data);
+uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t CRC_GetCRC(void);
+void CRC_SetIDRegister(uint8_t IDValue);
+uint8_t CRC_GetIDRegister(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_CRC_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_dac.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_dac.h
new file mode 100644
index 0000000000000000000000000000000000000000..710616412cdef7b5967dc64825b4aed69440cba8
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_dac.h
@@ -0,0 +1,317 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_dac.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the DAC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DAC_H
+#define __STM32F10x_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup DAC
+  * @{
+  */
+
+/** @defgroup DAC_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  DAC Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t DAC_Trigger;                      /*!< Specifies the external trigger for the selected DAC channel.
+                                                  This parameter can be a value of @ref DAC_trigger_selection */
+
+  uint32_t DAC_WaveGeneration;               /*!< Specifies whether DAC channel noise waves or triangle waves
+                                                  are generated, or whether no wave is generated.
+                                                  This parameter can be a value of @ref DAC_wave_generation */
+
+  uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or
+                                                  the maximum amplitude triangle generation for the DAC channel. 
+                                                  This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */
+
+  uint32_t DAC_OutputBuffer;                 /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+                                                  This parameter can be a value of @ref DAC_output_buffer */
+}DAC_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Exported_Constants
+  * @{
+  */
+
+/** @defgroup DAC_trigger_selection 
+  * @{
+  */
+
+#define DAC_Trigger_None                   ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register 
+                                                                       has been loaded, and not by external trigger */
+#define DAC_Trigger_T6_TRGO                ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T8_TRGO                ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+                                                                       only in High-density devices*/
+#define DAC_Trigger_T3_TRGO                ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+                                                                       only in Connectivity line, Medium-density and Low-density Value Line devices */
+#define DAC_Trigger_T7_TRGO                ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T5_TRGO                ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T15_TRGO               ((uint32_t)0x0000001C) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel 
+                                                                       only in Medium-density and Low-density Value Line devices*/
+#define DAC_Trigger_T2_TRGO                ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_T4_TRGO                ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_Ext_IT9                ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_Trigger_Software               ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \
+                                 ((TRIGGER) == DAC_Trigger_T6_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_T8_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_T7_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_T5_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_T2_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_T4_TRGO) || \
+                                 ((TRIGGER) == DAC_Trigger_Ext_IT9) || \
+                                 ((TRIGGER) == DAC_Trigger_Software))
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_wave_generation 
+  * @{
+  */
+
+#define DAC_WaveGeneration_None            ((uint32_t)0x00000000)
+#define DAC_WaveGeneration_Noise           ((uint32_t)0x00000040)
+#define DAC_WaveGeneration_Triangle        ((uint32_t)0x00000080)
+#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \
+                                    ((WAVE) == DAC_WaveGeneration_Noise) || \
+                                    ((WAVE) == DAC_WaveGeneration_Triangle))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_lfsrunmask_triangleamplitude
+  * @{
+  */
+
+#define DAC_LFSRUnmask_Bit0                ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUnmask_Bits1_0             ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits2_0             ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits3_0             ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits4_0             ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits5_0             ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits6_0             ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits7_0             ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits8_0             ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits9_0             ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits10_0            ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUnmask_Bits11_0            ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TriangleAmplitude_1            ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TriangleAmplitude_3            ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */
+#define DAC_TriangleAmplitude_7            ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */
+#define DAC_TriangleAmplitude_15           ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */
+#define DAC_TriangleAmplitude_31           ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */
+#define DAC_TriangleAmplitude_63           ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */
+#define DAC_TriangleAmplitude_127          ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */
+#define DAC_TriangleAmplitude_255          ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */
+#define DAC_TriangleAmplitude_511          ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */
+#define DAC_TriangleAmplitude_1023         ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TriangleAmplitude_2047         ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TriangleAmplitude_4095         ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \
+                                                      ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_1) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_3) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_7) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_15) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_31) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_63) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_127) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_255) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_511) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_1023) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_2047) || \
+                                                      ((VALUE) == DAC_TriangleAmplitude_4095))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_output_buffer 
+  * @{
+  */
+
+#define DAC_OutputBuffer_Enable            ((uint32_t)0x00000000)
+#define DAC_OutputBuffer_Disable           ((uint32_t)0x00000002)
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \
+                                           ((STATE) == DAC_OutputBuffer_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Channel_selection 
+  * @{
+  */
+
+#define DAC_Channel_1                      ((uint32_t)0x00000000)
+#define DAC_Channel_2                      ((uint32_t)0x00000010)
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \
+                                 ((CHANNEL) == DAC_Channel_2))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_data_alignment 
+  * @{
+  */
+
+#define DAC_Align_12b_R                    ((uint32_t)0x00000000)
+#define DAC_Align_12b_L                    ((uint32_t)0x00000004)
+#define DAC_Align_8b_R                     ((uint32_t)0x00000008)
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \
+                             ((ALIGN) == DAC_Align_12b_L) || \
+                             ((ALIGN) == DAC_Align_8b_R))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_wave_generation 
+  * @{
+  */
+
+#define DAC_Wave_Noise                     ((uint32_t)0x00000040)
+#define DAC_Wave_Triangle                  ((uint32_t)0x00000080)
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \
+                           ((WAVE) == DAC_Wave_Triangle))
+/**
+  * @}
+  */
+
+/** @defgroup DAC_data 
+  * @{
+  */
+
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) 
+/**
+  * @}
+  */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL)  || defined (STM32F10X_HD_VL)
+/** @defgroup DAC_interrupts_definition 
+  * @{
+  */ 
+  
+#define DAC_IT_DMAUDR                      ((uint32_t)0x00002000)  
+#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR)) 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup DAC_flags_definition 
+  * @{
+  */ 
+  
+#define DAC_FLAG_DMAUDR                    ((uint32_t)0x00002000)  
+#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR))  
+
+/**
+  * @}
+  */
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Exported_Functions
+  * @{
+  */
+
+void DAC_DeInit(void);
+void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct);
+void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct);
+void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState);
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState);
+#endif
+void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState);
+void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState);
+void DAC_DualSoftwareTriggerCmd(FunctionalState NewState);
+void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState);
+void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data);
+void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data);
+void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1);
+uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel);
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) 
+FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG);
+void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG);
+ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT);
+void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_DAC_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_dbgmcu.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_dbgmcu.h
new file mode 100644
index 0000000000000000000000000000000000000000..1e6a68acb43f28f5972450ec28a2d0c56f7a1c4e
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_dbgmcu.h
@@ -0,0 +1,119 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_dbgmcu.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the DBGMCU 
+  *          firmware library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DBGMCU_H
+#define __STM32F10x_DBGMCU_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup DBGMCU
+  * @{
+  */
+
+/** @defgroup DBGMCU_Exported_Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DBGMCU_Exported_Constants
+  * @{
+  */
+
+#define DBGMCU_SLEEP                 ((uint32_t)0x00000001)
+#define DBGMCU_STOP                  ((uint32_t)0x00000002)
+#define DBGMCU_STANDBY               ((uint32_t)0x00000004)
+#define DBGMCU_IWDG_STOP             ((uint32_t)0x00000100)
+#define DBGMCU_WWDG_STOP             ((uint32_t)0x00000200)
+#define DBGMCU_TIM1_STOP             ((uint32_t)0x00000400)
+#define DBGMCU_TIM2_STOP             ((uint32_t)0x00000800)
+#define DBGMCU_TIM3_STOP             ((uint32_t)0x00001000)
+#define DBGMCU_TIM4_STOP             ((uint32_t)0x00002000)
+#define DBGMCU_CAN1_STOP             ((uint32_t)0x00004000)
+#define DBGMCU_I2C1_SMBUS_TIMEOUT    ((uint32_t)0x00008000)
+#define DBGMCU_I2C2_SMBUS_TIMEOUT    ((uint32_t)0x00010000)
+#define DBGMCU_TIM8_STOP             ((uint32_t)0x00020000)
+#define DBGMCU_TIM5_STOP             ((uint32_t)0x00040000)
+#define DBGMCU_TIM6_STOP             ((uint32_t)0x00080000)
+#define DBGMCU_TIM7_STOP             ((uint32_t)0x00100000)
+#define DBGMCU_CAN2_STOP             ((uint32_t)0x00200000)
+#define DBGMCU_TIM15_STOP            ((uint32_t)0x00400000)
+#define DBGMCU_TIM16_STOP            ((uint32_t)0x00800000)
+#define DBGMCU_TIM17_STOP            ((uint32_t)0x01000000)
+#define DBGMCU_TIM12_STOP            ((uint32_t)0x02000000)
+#define DBGMCU_TIM13_STOP            ((uint32_t)0x04000000)
+#define DBGMCU_TIM14_STOP            ((uint32_t)0x08000000)
+#define DBGMCU_TIM9_STOP             ((uint32_t)0x10000000)
+#define DBGMCU_TIM10_STOP            ((uint32_t)0x20000000)
+#define DBGMCU_TIM11_STOP            ((uint32_t)0x40000000)
+                                              
+#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0x800000F8) == 0x00) && ((PERIPH) != 0x00))
+/**
+  * @}
+  */ 
+
+/** @defgroup DBGMCU_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DBGMCU_Exported_Functions
+  * @{
+  */
+
+uint32_t DBGMCU_GetREVID(void);
+uint32_t DBGMCU_GetDEVID(void);
+void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_DBGMCU_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_dma.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_dma.h
new file mode 100644
index 0000000000000000000000000000000000000000..b5dc6a80ab63ee64032ecdde2c67e06af48c0c43
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_dma.h
@@ -0,0 +1,439 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_dma.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the DMA firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_DMA_H
+#define __STM32F10x_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup DMA
+  * @{
+  */
+
+/** @defgroup DMA_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  DMA Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */
+
+  uint32_t DMA_MemoryBaseAddr;     /*!< Specifies the memory base address for DMAy Channelx. */
+
+  uint32_t DMA_DIR;                /*!< Specifies if the peripheral is the source or destination.
+                                        This parameter can be a value of @ref DMA_data_transfer_direction */
+
+  uint32_t DMA_BufferSize;         /*!< Specifies the buffer size, in data unit, of the specified Channel. 
+                                        The data unit is equal to the configuration set in DMA_PeripheralDataSize
+                                        or DMA_MemoryDataSize members depending in the transfer direction. */
+
+  uint32_t DMA_PeripheralInc;      /*!< Specifies whether the Peripheral address register is incremented or not.
+                                        This parameter can be a value of @ref DMA_peripheral_incremented_mode */
+
+  uint32_t DMA_MemoryInc;          /*!< Specifies whether the memory address register is incremented or not.
+                                        This parameter can be a value of @ref DMA_memory_incremented_mode */
+
+  uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width.
+                                        This parameter can be a value of @ref DMA_peripheral_data_size */
+
+  uint32_t DMA_MemoryDataSize;     /*!< Specifies the Memory data width.
+                                        This parameter can be a value of @ref DMA_memory_data_size */
+
+  uint32_t DMA_Mode;               /*!< Specifies the operation mode of the DMAy Channelx.
+                                        This parameter can be a value of @ref DMA_circular_normal_mode.
+                                        @note: The circular buffer mode cannot be used if the memory-to-memory
+                                              data transfer is configured on the selected Channel */
+
+  uint32_t DMA_Priority;           /*!< Specifies the software priority for the DMAy Channelx.
+                                        This parameter can be a value of @ref DMA_priority_level */
+
+  uint32_t DMA_M2M;                /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer.
+                                        This parameter can be a value of @ref DMA_memory_to_memory */
+}DMA_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Constants
+  * @{
+  */
+
+#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \
+                                   ((PERIPH) == DMA1_Channel2) || \
+                                   ((PERIPH) == DMA1_Channel3) || \
+                                   ((PERIPH) == DMA1_Channel4) || \
+                                   ((PERIPH) == DMA1_Channel5) || \
+                                   ((PERIPH) == DMA1_Channel6) || \
+                                   ((PERIPH) == DMA1_Channel7) || \
+                                   ((PERIPH) == DMA2_Channel1) || \
+                                   ((PERIPH) == DMA2_Channel2) || \
+                                   ((PERIPH) == DMA2_Channel3) || \
+                                   ((PERIPH) == DMA2_Channel4) || \
+                                   ((PERIPH) == DMA2_Channel5))
+
+/** @defgroup DMA_data_transfer_direction 
+  * @{
+  */
+
+#define DMA_DIR_PeripheralDST              ((uint32_t)0x00000010)
+#define DMA_DIR_PeripheralSRC              ((uint32_t)0x00000000)
+#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \
+                         ((DIR) == DMA_DIR_PeripheralSRC))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_peripheral_incremented_mode 
+  * @{
+  */
+
+#define DMA_PeripheralInc_Enable           ((uint32_t)0x00000040)
+#define DMA_PeripheralInc_Disable          ((uint32_t)0x00000000)
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \
+                                            ((STATE) == DMA_PeripheralInc_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_memory_incremented_mode 
+  * @{
+  */
+
+#define DMA_MemoryInc_Enable               ((uint32_t)0x00000080)
+#define DMA_MemoryInc_Disable              ((uint32_t)0x00000000)
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \
+                                        ((STATE) == DMA_MemoryInc_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_peripheral_data_size 
+  * @{
+  */
+
+#define DMA_PeripheralDataSize_Byte        ((uint32_t)0x00000000)
+#define DMA_PeripheralDataSize_HalfWord    ((uint32_t)0x00000100)
+#define DMA_PeripheralDataSize_Word        ((uint32_t)0x00000200)
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \
+                                           ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \
+                                           ((SIZE) == DMA_PeripheralDataSize_Word))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_memory_data_size 
+  * @{
+  */
+
+#define DMA_MemoryDataSize_Byte            ((uint32_t)0x00000000)
+#define DMA_MemoryDataSize_HalfWord        ((uint32_t)0x00000400)
+#define DMA_MemoryDataSize_Word            ((uint32_t)0x00000800)
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \
+                                       ((SIZE) == DMA_MemoryDataSize_HalfWord) || \
+                                       ((SIZE) == DMA_MemoryDataSize_Word))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_circular_normal_mode 
+  * @{
+  */
+
+#define DMA_Mode_Circular                  ((uint32_t)0x00000020)
+#define DMA_Mode_Normal                    ((uint32_t)0x00000000)
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_priority_level 
+  * @{
+  */
+
+#define DMA_Priority_VeryHigh              ((uint32_t)0x00003000)
+#define DMA_Priority_High                  ((uint32_t)0x00002000)
+#define DMA_Priority_Medium                ((uint32_t)0x00001000)
+#define DMA_Priority_Low                   ((uint32_t)0x00000000)
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \
+                                   ((PRIORITY) == DMA_Priority_High) || \
+                                   ((PRIORITY) == DMA_Priority_Medium) || \
+                                   ((PRIORITY) == DMA_Priority_Low))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_memory_to_memory 
+  * @{
+  */
+
+#define DMA_M2M_Enable                     ((uint32_t)0x00004000)
+#define DMA_M2M_Disable                    ((uint32_t)0x00000000)
+#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable))
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_interrupts_definition 
+  * @{
+  */
+
+#define DMA_IT_TC                          ((uint32_t)0x00000002)
+#define DMA_IT_HT                          ((uint32_t)0x00000004)
+#define DMA_IT_TE                          ((uint32_t)0x00000008)
+#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00))
+
+#define DMA1_IT_GL1                        ((uint32_t)0x00000001)
+#define DMA1_IT_TC1                        ((uint32_t)0x00000002)
+#define DMA1_IT_HT1                        ((uint32_t)0x00000004)
+#define DMA1_IT_TE1                        ((uint32_t)0x00000008)
+#define DMA1_IT_GL2                        ((uint32_t)0x00000010)
+#define DMA1_IT_TC2                        ((uint32_t)0x00000020)
+#define DMA1_IT_HT2                        ((uint32_t)0x00000040)
+#define DMA1_IT_TE2                        ((uint32_t)0x00000080)
+#define DMA1_IT_GL3                        ((uint32_t)0x00000100)
+#define DMA1_IT_TC3                        ((uint32_t)0x00000200)
+#define DMA1_IT_HT3                        ((uint32_t)0x00000400)
+#define DMA1_IT_TE3                        ((uint32_t)0x00000800)
+#define DMA1_IT_GL4                        ((uint32_t)0x00001000)
+#define DMA1_IT_TC4                        ((uint32_t)0x00002000)
+#define DMA1_IT_HT4                        ((uint32_t)0x00004000)
+#define DMA1_IT_TE4                        ((uint32_t)0x00008000)
+#define DMA1_IT_GL5                        ((uint32_t)0x00010000)
+#define DMA1_IT_TC5                        ((uint32_t)0x00020000)
+#define DMA1_IT_HT5                        ((uint32_t)0x00040000)
+#define DMA1_IT_TE5                        ((uint32_t)0x00080000)
+#define DMA1_IT_GL6                        ((uint32_t)0x00100000)
+#define DMA1_IT_TC6                        ((uint32_t)0x00200000)
+#define DMA1_IT_HT6                        ((uint32_t)0x00400000)
+#define DMA1_IT_TE6                        ((uint32_t)0x00800000)
+#define DMA1_IT_GL7                        ((uint32_t)0x01000000)
+#define DMA1_IT_TC7                        ((uint32_t)0x02000000)
+#define DMA1_IT_HT7                        ((uint32_t)0x04000000)
+#define DMA1_IT_TE7                        ((uint32_t)0x08000000)
+
+#define DMA2_IT_GL1                        ((uint32_t)0x10000001)
+#define DMA2_IT_TC1                        ((uint32_t)0x10000002)
+#define DMA2_IT_HT1                        ((uint32_t)0x10000004)
+#define DMA2_IT_TE1                        ((uint32_t)0x10000008)
+#define DMA2_IT_GL2                        ((uint32_t)0x10000010)
+#define DMA2_IT_TC2                        ((uint32_t)0x10000020)
+#define DMA2_IT_HT2                        ((uint32_t)0x10000040)
+#define DMA2_IT_TE2                        ((uint32_t)0x10000080)
+#define DMA2_IT_GL3                        ((uint32_t)0x10000100)
+#define DMA2_IT_TC3                        ((uint32_t)0x10000200)
+#define DMA2_IT_HT3                        ((uint32_t)0x10000400)
+#define DMA2_IT_TE3                        ((uint32_t)0x10000800)
+#define DMA2_IT_GL4                        ((uint32_t)0x10001000)
+#define DMA2_IT_TC4                        ((uint32_t)0x10002000)
+#define DMA2_IT_HT4                        ((uint32_t)0x10004000)
+#define DMA2_IT_TE4                        ((uint32_t)0x10008000)
+#define DMA2_IT_GL5                        ((uint32_t)0x10010000)
+#define DMA2_IT_TC5                        ((uint32_t)0x10020000)
+#define DMA2_IT_HT5                        ((uint32_t)0x10040000)
+#define DMA2_IT_TE5                        ((uint32_t)0x10080000)
+
+#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00))
+
+#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \
+                           ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \
+                           ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \
+                           ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \
+                           ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \
+                           ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \
+                           ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \
+                           ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \
+                           ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \
+                           ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \
+                           ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \
+                           ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \
+                           ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \
+                           ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \
+                           ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \
+                           ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \
+                           ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \
+                           ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \
+                           ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \
+                           ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \
+                           ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \
+                           ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \
+                           ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \
+                           ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5))
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_flags_definition 
+  * @{
+  */
+#define DMA1_FLAG_GL1                      ((uint32_t)0x00000001)
+#define DMA1_FLAG_TC1                      ((uint32_t)0x00000002)
+#define DMA1_FLAG_HT1                      ((uint32_t)0x00000004)
+#define DMA1_FLAG_TE1                      ((uint32_t)0x00000008)
+#define DMA1_FLAG_GL2                      ((uint32_t)0x00000010)
+#define DMA1_FLAG_TC2                      ((uint32_t)0x00000020)
+#define DMA1_FLAG_HT2                      ((uint32_t)0x00000040)
+#define DMA1_FLAG_TE2                      ((uint32_t)0x00000080)
+#define DMA1_FLAG_GL3                      ((uint32_t)0x00000100)
+#define DMA1_FLAG_TC3                      ((uint32_t)0x00000200)
+#define DMA1_FLAG_HT3                      ((uint32_t)0x00000400)
+#define DMA1_FLAG_TE3                      ((uint32_t)0x00000800)
+#define DMA1_FLAG_GL4                      ((uint32_t)0x00001000)
+#define DMA1_FLAG_TC4                      ((uint32_t)0x00002000)
+#define DMA1_FLAG_HT4                      ((uint32_t)0x00004000)
+#define DMA1_FLAG_TE4                      ((uint32_t)0x00008000)
+#define DMA1_FLAG_GL5                      ((uint32_t)0x00010000)
+#define DMA1_FLAG_TC5                      ((uint32_t)0x00020000)
+#define DMA1_FLAG_HT5                      ((uint32_t)0x00040000)
+#define DMA1_FLAG_TE5                      ((uint32_t)0x00080000)
+#define DMA1_FLAG_GL6                      ((uint32_t)0x00100000)
+#define DMA1_FLAG_TC6                      ((uint32_t)0x00200000)
+#define DMA1_FLAG_HT6                      ((uint32_t)0x00400000)
+#define DMA1_FLAG_TE6                      ((uint32_t)0x00800000)
+#define DMA1_FLAG_GL7                      ((uint32_t)0x01000000)
+#define DMA1_FLAG_TC7                      ((uint32_t)0x02000000)
+#define DMA1_FLAG_HT7                      ((uint32_t)0x04000000)
+#define DMA1_FLAG_TE7                      ((uint32_t)0x08000000)
+
+#define DMA2_FLAG_GL1                      ((uint32_t)0x10000001)
+#define DMA2_FLAG_TC1                      ((uint32_t)0x10000002)
+#define DMA2_FLAG_HT1                      ((uint32_t)0x10000004)
+#define DMA2_FLAG_TE1                      ((uint32_t)0x10000008)
+#define DMA2_FLAG_GL2                      ((uint32_t)0x10000010)
+#define DMA2_FLAG_TC2                      ((uint32_t)0x10000020)
+#define DMA2_FLAG_HT2                      ((uint32_t)0x10000040)
+#define DMA2_FLAG_TE2                      ((uint32_t)0x10000080)
+#define DMA2_FLAG_GL3                      ((uint32_t)0x10000100)
+#define DMA2_FLAG_TC3                      ((uint32_t)0x10000200)
+#define DMA2_FLAG_HT3                      ((uint32_t)0x10000400)
+#define DMA2_FLAG_TE3                      ((uint32_t)0x10000800)
+#define DMA2_FLAG_GL4                      ((uint32_t)0x10001000)
+#define DMA2_FLAG_TC4                      ((uint32_t)0x10002000)
+#define DMA2_FLAG_HT4                      ((uint32_t)0x10004000)
+#define DMA2_FLAG_TE4                      ((uint32_t)0x10008000)
+#define DMA2_FLAG_GL5                      ((uint32_t)0x10010000)
+#define DMA2_FLAG_TC5                      ((uint32_t)0x10020000)
+#define DMA2_FLAG_HT5                      ((uint32_t)0x10040000)
+#define DMA2_FLAG_TE5                      ((uint32_t)0x10080000)
+
+#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00))
+
+#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \
+                               ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \
+                               ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \
+                               ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \
+                               ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \
+                               ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \
+                               ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \
+                               ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \
+                               ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \
+                               ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \
+                               ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \
+                               ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \
+                               ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \
+                               ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \
+                               ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \
+                               ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \
+                               ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \
+                               ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \
+                               ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \
+                               ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \
+                               ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \
+                               ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \
+                               ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \
+                               ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5))
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Buffer_Size 
+  * @{
+  */
+
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Exported_Functions
+  * @{
+  */
+
+void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx);
+void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct);
+void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct);
+void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState);
+void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState);
+void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber); 
+uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx);
+FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG);
+void DMA_ClearFlag(uint32_t DMAy_FLAG);
+ITStatus DMA_GetITStatus(uint32_t DMAy_IT);
+void DMA_ClearITPendingBit(uint32_t DMAy_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_DMA_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_exti.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_exti.h
new file mode 100644
index 0000000000000000000000000000000000000000..a1ab7d03e047850fb775ed4a0fd127fb3fa2c8fd
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_exti.h
@@ -0,0 +1,184 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_exti.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the EXTI firmware
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_EXTI_H
+#define __STM32F10x_EXTI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup EXTI
+  * @{
+  */
+
+/** @defgroup EXTI_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  EXTI mode enumeration  
+  */
+
+typedef enum
+{
+  EXTI_Mode_Interrupt = 0x00,
+  EXTI_Mode_Event = 0x04
+}EXTIMode_TypeDef;
+
+#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event))
+
+/** 
+  * @brief  EXTI Trigger enumeration  
+  */
+
+typedef enum
+{
+  EXTI_Trigger_Rising = 0x08,
+  EXTI_Trigger_Falling = 0x0C,  
+  EXTI_Trigger_Rising_Falling = 0x10
+}EXTITrigger_TypeDef;
+
+#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
+                                  ((TRIGGER) == EXTI_Trigger_Falling) || \
+                                  ((TRIGGER) == EXTI_Trigger_Rising_Falling))
+/** 
+  * @brief  EXTI Init Structure definition  
+  */
+
+typedef struct
+{
+  uint32_t EXTI_Line;               /*!< Specifies the EXTI lines to be enabled or disabled.
+                                         This parameter can be any combination of @ref EXTI_Lines */
+   
+  EXTIMode_TypeDef EXTI_Mode;       /*!< Specifies the mode for the EXTI lines.
+                                         This parameter can be a value of @ref EXTIMode_TypeDef */
+
+  EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines.
+                                         This parameter can be a value of @ref EXTIMode_TypeDef */
+
+  FunctionalState EXTI_LineCmd;     /*!< Specifies the new state of the selected EXTI lines.
+                                         This parameter can be set either to ENABLE or DISABLE */ 
+}EXTI_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Constants
+  * @{
+  */
+
+/** @defgroup EXTI_Lines 
+  * @{
+  */
+
+#define EXTI_Line0       ((uint32_t)0x00001)  /*!< External interrupt line 0 */
+#define EXTI_Line1       ((uint32_t)0x00002)  /*!< External interrupt line 1 */
+#define EXTI_Line2       ((uint32_t)0x00004)  /*!< External interrupt line 2 */
+#define EXTI_Line3       ((uint32_t)0x00008)  /*!< External interrupt line 3 */
+#define EXTI_Line4       ((uint32_t)0x00010)  /*!< External interrupt line 4 */
+#define EXTI_Line5       ((uint32_t)0x00020)  /*!< External interrupt line 5 */
+#define EXTI_Line6       ((uint32_t)0x00040)  /*!< External interrupt line 6 */
+#define EXTI_Line7       ((uint32_t)0x00080)  /*!< External interrupt line 7 */
+#define EXTI_Line8       ((uint32_t)0x00100)  /*!< External interrupt line 8 */
+#define EXTI_Line9       ((uint32_t)0x00200)  /*!< External interrupt line 9 */
+#define EXTI_Line10      ((uint32_t)0x00400)  /*!< External interrupt line 10 */
+#define EXTI_Line11      ((uint32_t)0x00800)  /*!< External interrupt line 11 */
+#define EXTI_Line12      ((uint32_t)0x01000)  /*!< External interrupt line 12 */
+#define EXTI_Line13      ((uint32_t)0x02000)  /*!< External interrupt line 13 */
+#define EXTI_Line14      ((uint32_t)0x04000)  /*!< External interrupt line 14 */
+#define EXTI_Line15      ((uint32_t)0x08000)  /*!< External interrupt line 15 */
+#define EXTI_Line16      ((uint32_t)0x10000)  /*!< External interrupt line 16 Connected to the PVD Output */
+#define EXTI_Line17      ((uint32_t)0x20000)  /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define EXTI_Line18      ((uint32_t)0x40000)  /*!< External interrupt line 18 Connected to the USB Device/USB OTG FS
+                                                   Wakeup from suspend event */                                    
+#define EXTI_Line19      ((uint32_t)0x80000)  /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */
+                                          
+#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFFF00000) == 0x00) && ((LINE) != (uint16_t)0x00))
+#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \
+                            ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \
+                            ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \
+                            ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \
+                            ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \
+                            ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \
+                            ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \
+                            ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \
+                            ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \
+                            ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19))
+
+                    
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Exported_Functions
+  * @{
+  */
+
+void EXTI_DeInit(void);
+void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct);
+void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
+void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line);
+FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line);
+void EXTI_ClearFlag(uint32_t EXTI_Line);
+ITStatus EXTI_GetITStatus(uint32_t EXTI_Line);
+void EXTI_ClearITPendingBit(uint32_t EXTI_Line);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_EXTI_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_flash.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_flash.h
new file mode 100644
index 0000000000000000000000000000000000000000..f46d4e873b3c0d3c42ce1f4cc8d405ff58ee0b12
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_flash.h
@@ -0,0 +1,426 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_flash.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the FLASH 
+  *          firmware library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_FLASH_H
+#define __STM32F10x_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup FLASH
+  * @{
+  */
+
+/** @defgroup FLASH_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  FLASH Status  
+  */
+
+typedef enum
+{ 
+  FLASH_BUSY = 1,
+  FLASH_ERROR_PG,
+  FLASH_ERROR_WRP,
+  FLASH_COMPLETE,
+  FLASH_TIMEOUT
+}FLASH_Status;
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Constants
+  * @{
+  */
+
+/** @defgroup Flash_Latency 
+  * @{
+  */
+
+#define FLASH_Latency_0                ((uint32_t)0x00000000)  /*!< FLASH Zero Latency cycle */
+#define FLASH_Latency_1                ((uint32_t)0x00000001)  /*!< FLASH One Latency cycle */
+#define FLASH_Latency_2                ((uint32_t)0x00000002)  /*!< FLASH Two Latency cycles */
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \
+                                   ((LATENCY) == FLASH_Latency_1) || \
+                                   ((LATENCY) == FLASH_Latency_2))
+/**
+  * @}
+  */
+
+/** @defgroup Half_Cycle_Enable_Disable 
+  * @{
+  */
+
+#define FLASH_HalfCycleAccess_Enable   ((uint32_t)0x00000008)  /*!< FLASH Half Cycle Enable */
+#define FLASH_HalfCycleAccess_Disable  ((uint32_t)0x00000000)  /*!< FLASH Half Cycle Disable */
+#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \
+                                               ((STATE) == FLASH_HalfCycleAccess_Disable)) 
+/**
+  * @}
+  */
+
+/** @defgroup Prefetch_Buffer_Enable_Disable 
+  * @{
+  */
+
+#define FLASH_PrefetchBuffer_Enable    ((uint32_t)0x00000010)  /*!< FLASH Prefetch Buffer Enable */
+#define FLASH_PrefetchBuffer_Disable   ((uint32_t)0x00000000)  /*!< FLASH Prefetch Buffer Disable */
+#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \
+                                              ((STATE) == FLASH_PrefetchBuffer_Disable)) 
+/**
+  * @}
+  */
+
+/** @defgroup Option_Bytes_Write_Protection 
+  * @{
+  */
+
+/* Values to be used with STM32 Low and Medium density devices */
+#define FLASH_WRProt_Pages0to3         ((uint32_t)0x00000001) /*!< STM32 Low and Medium density devices: Write protection of page 0 to 3 */
+#define FLASH_WRProt_Pages4to7         ((uint32_t)0x00000002) /*!< STM32 Low and Medium density devices: Write protection of page 4 to 7 */
+#define FLASH_WRProt_Pages8to11        ((uint32_t)0x00000004) /*!< STM32 Low and Medium density devices: Write protection of page 8 to 11 */
+#define FLASH_WRProt_Pages12to15       ((uint32_t)0x00000008) /*!< STM32 Low and Medium density devices: Write protection of page 12 to 15 */
+#define FLASH_WRProt_Pages16to19       ((uint32_t)0x00000010) /*!< STM32 Low and Medium density devices: Write protection of page 16 to 19 */
+#define FLASH_WRProt_Pages20to23       ((uint32_t)0x00000020) /*!< STM32 Low and Medium density devices: Write protection of page 20 to 23 */
+#define FLASH_WRProt_Pages24to27       ((uint32_t)0x00000040) /*!< STM32 Low and Medium density devices: Write protection of page 24 to 27 */
+#define FLASH_WRProt_Pages28to31       ((uint32_t)0x00000080) /*!< STM32 Low and Medium density devices: Write protection of page 28 to 31 */
+
+/* Values to be used with STM32 Medium-density devices */
+#define FLASH_WRProt_Pages32to35       ((uint32_t)0x00000100) /*!< STM32 Medium-density devices: Write protection of page 32 to 35 */
+#define FLASH_WRProt_Pages36to39       ((uint32_t)0x00000200) /*!< STM32 Medium-density devices: Write protection of page 36 to 39 */
+#define FLASH_WRProt_Pages40to43       ((uint32_t)0x00000400) /*!< STM32 Medium-density devices: Write protection of page 40 to 43 */
+#define FLASH_WRProt_Pages44to47       ((uint32_t)0x00000800) /*!< STM32 Medium-density devices: Write protection of page 44 to 47 */
+#define FLASH_WRProt_Pages48to51       ((uint32_t)0x00001000) /*!< STM32 Medium-density devices: Write protection of page 48 to 51 */
+#define FLASH_WRProt_Pages52to55       ((uint32_t)0x00002000) /*!< STM32 Medium-density devices: Write protection of page 52 to 55 */
+#define FLASH_WRProt_Pages56to59       ((uint32_t)0x00004000) /*!< STM32 Medium-density devices: Write protection of page 56 to 59 */
+#define FLASH_WRProt_Pages60to63       ((uint32_t)0x00008000) /*!< STM32 Medium-density devices: Write protection of page 60 to 63 */
+#define FLASH_WRProt_Pages64to67       ((uint32_t)0x00010000) /*!< STM32 Medium-density devices: Write protection of page 64 to 67 */
+#define FLASH_WRProt_Pages68to71       ((uint32_t)0x00020000) /*!< STM32 Medium-density devices: Write protection of page 68 to 71 */
+#define FLASH_WRProt_Pages72to75       ((uint32_t)0x00040000) /*!< STM32 Medium-density devices: Write protection of page 72 to 75 */
+#define FLASH_WRProt_Pages76to79       ((uint32_t)0x00080000) /*!< STM32 Medium-density devices: Write protection of page 76 to 79 */
+#define FLASH_WRProt_Pages80to83       ((uint32_t)0x00100000) /*!< STM32 Medium-density devices: Write protection of page 80 to 83 */
+#define FLASH_WRProt_Pages84to87       ((uint32_t)0x00200000) /*!< STM32 Medium-density devices: Write protection of page 84 to 87 */
+#define FLASH_WRProt_Pages88to91       ((uint32_t)0x00400000) /*!< STM32 Medium-density devices: Write protection of page 88 to 91 */
+#define FLASH_WRProt_Pages92to95       ((uint32_t)0x00800000) /*!< STM32 Medium-density devices: Write protection of page 92 to 95 */
+#define FLASH_WRProt_Pages96to99       ((uint32_t)0x01000000) /*!< STM32 Medium-density devices: Write protection of page 96 to 99 */
+#define FLASH_WRProt_Pages100to103     ((uint32_t)0x02000000) /*!< STM32 Medium-density devices: Write protection of page 100 to 103 */
+#define FLASH_WRProt_Pages104to107     ((uint32_t)0x04000000) /*!< STM32 Medium-density devices: Write protection of page 104 to 107 */
+#define FLASH_WRProt_Pages108to111     ((uint32_t)0x08000000) /*!< STM32 Medium-density devices: Write protection of page 108 to 111 */
+#define FLASH_WRProt_Pages112to115     ((uint32_t)0x10000000) /*!< STM32 Medium-density devices: Write protection of page 112 to 115 */
+#define FLASH_WRProt_Pages116to119     ((uint32_t)0x20000000) /*!< STM32 Medium-density devices: Write protection of page 115 to 119 */
+#define FLASH_WRProt_Pages120to123     ((uint32_t)0x40000000) /*!< STM32 Medium-density devices: Write protection of page 120 to 123 */
+#define FLASH_WRProt_Pages124to127     ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 124 to 127 */
+
+/* Values to be used with STM32 High-density and STM32F10X Connectivity line devices */
+#define FLASH_WRProt_Pages0to1         ((uint32_t)0x00000001) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 0 to 1 */
+#define FLASH_WRProt_Pages2to3         ((uint32_t)0x00000002) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 2 to 3 */
+#define FLASH_WRProt_Pages4to5         ((uint32_t)0x00000004) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 4 to 5 */
+#define FLASH_WRProt_Pages6to7         ((uint32_t)0x00000008) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 6 to 7 */
+#define FLASH_WRProt_Pages8to9         ((uint32_t)0x00000010) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 8 to 9 */
+#define FLASH_WRProt_Pages10to11       ((uint32_t)0x00000020) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 10 to 11 */
+#define FLASH_WRProt_Pages12to13       ((uint32_t)0x00000040) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 12 to 13 */
+#define FLASH_WRProt_Pages14to15       ((uint32_t)0x00000080) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 14 to 15 */
+#define FLASH_WRProt_Pages16to17       ((uint32_t)0x00000100) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 16 to 17 */
+#define FLASH_WRProt_Pages18to19       ((uint32_t)0x00000200) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 18 to 19 */
+#define FLASH_WRProt_Pages20to21       ((uint32_t)0x00000400) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 20 to 21 */
+#define FLASH_WRProt_Pages22to23       ((uint32_t)0x00000800) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 22 to 23 */
+#define FLASH_WRProt_Pages24to25       ((uint32_t)0x00001000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 24 to 25 */
+#define FLASH_WRProt_Pages26to27       ((uint32_t)0x00002000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 26 to 27 */
+#define FLASH_WRProt_Pages28to29       ((uint32_t)0x00004000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 28 to 29 */
+#define FLASH_WRProt_Pages30to31       ((uint32_t)0x00008000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 30 to 31 */
+#define FLASH_WRProt_Pages32to33       ((uint32_t)0x00010000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 32 to 33 */
+#define FLASH_WRProt_Pages34to35       ((uint32_t)0x00020000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 34 to 35 */
+#define FLASH_WRProt_Pages36to37       ((uint32_t)0x00040000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 36 to 37 */
+#define FLASH_WRProt_Pages38to39       ((uint32_t)0x00080000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 38 to 39 */
+#define FLASH_WRProt_Pages40to41       ((uint32_t)0x00100000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 40 to 41 */
+#define FLASH_WRProt_Pages42to43       ((uint32_t)0x00200000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 42 to 43 */
+#define FLASH_WRProt_Pages44to45       ((uint32_t)0x00400000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 44 to 45 */
+#define FLASH_WRProt_Pages46to47       ((uint32_t)0x00800000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 46 to 47 */
+#define FLASH_WRProt_Pages48to49       ((uint32_t)0x01000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 48 to 49 */
+#define FLASH_WRProt_Pages50to51       ((uint32_t)0x02000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 50 to 51 */
+#define FLASH_WRProt_Pages52to53       ((uint32_t)0x04000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 52 to 53 */
+#define FLASH_WRProt_Pages54to55       ((uint32_t)0x08000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 54 to 55 */
+#define FLASH_WRProt_Pages56to57       ((uint32_t)0x10000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 56 to 57 */
+#define FLASH_WRProt_Pages58to59       ((uint32_t)0x20000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 58 to 59 */
+#define FLASH_WRProt_Pages60to61       ((uint32_t)0x40000000) /*!< STM32 High-density, XL-density and Connectivity line devices:
+                                                                   Write protection of page 60 to 61 */
+#define FLASH_WRProt_Pages62to127      ((uint32_t)0x80000000) /*!< STM32 Connectivity line devices: Write protection of page 62 to 127 */
+#define FLASH_WRProt_Pages62to255      ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 62 to 255 */
+#define FLASH_WRProt_Pages62to511      ((uint32_t)0x80000000) /*!< STM32 XL-density devices: Write protection of page 62 to 511 */
+
+#define FLASH_WRProt_AllPages          ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */
+
+#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000))
+
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x080FFFFF))
+
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806))
+
+/**
+  * @}
+  */
+
+/** @defgroup Option_Bytes_IWatchdog 
+  * @{
+  */
+
+#define OB_IWDG_SW                     ((uint16_t)0x0001)  /*!< Software IWDG selected */
+#define OB_IWDG_HW                     ((uint16_t)0x0000)  /*!< Hardware IWDG selected */
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+
+/**
+  * @}
+  */
+
+/** @defgroup Option_Bytes_nRST_STOP 
+  * @{
+  */
+
+#define OB_STOP_NoRST                  ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST                    ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST))
+
+/**
+  * @}
+  */
+
+/** @defgroup Option_Bytes_nRST_STDBY 
+  * @{
+  */
+
+#define OB_STDBY_NoRST                 ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST                   ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST))
+
+#ifdef STM32F10X_XL
+/**
+  * @}
+  */
+/** @defgroup FLASH_Boot
+  * @{
+  */
+#define FLASH_BOOT_Bank1  ((uint16_t)0x0000) /*!< At startup, if boot pins are set in boot from user Flash position
+                                                  and this parameter is selected the device will boot from Bank1(Default) */
+#define FLASH_BOOT_Bank2  ((uint16_t)0x0001) /*!< At startup, if boot pins are set in boot from user Flash position
+                                                  and this parameter is selected the device will boot from Bank 2 or Bank 1,
+                                                  depending on the activation of the bank */
+#define IS_FLASH_BOOT(BOOT) (((BOOT) == FLASH_BOOT_Bank1) || ((BOOT) == FLASH_BOOT_Bank2))
+#endif
+/**
+  * @}
+  */
+/** @defgroup FLASH_Interrupts 
+  * @{
+  */
+#ifdef STM32F10X_XL
+#define FLASH_IT_BANK2_ERROR                 ((uint32_t)0x80000400)  /*!< FPEC BANK2 error interrupt source */
+#define FLASH_IT_BANK2_EOP                   ((uint32_t)0x80001000)  /*!< End of FLASH BANK2 Operation Interrupt source */
+
+#define FLASH_IT_BANK1_ERROR                 FLASH_IT_ERROR          /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_BANK1_EOP                   FLASH_IT_EOP            /*!< End of FLASH BANK1 Operation Interrupt source */
+
+#define FLASH_IT_ERROR                 ((uint32_t)0x00000400)  /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_EOP                   ((uint32_t)0x00001000)  /*!< End of FLASH BANK1 Operation Interrupt source */
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0x7FFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
+#else
+#define FLASH_IT_ERROR                 ((uint32_t)0x00000400)  /*!< FPEC error interrupt source */
+#define FLASH_IT_EOP                   ((uint32_t)0x00001000)  /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_BANK1_ERROR           FLASH_IT_ERROR          /*!< FPEC BANK1 error interrupt source */
+#define FLASH_IT_BANK1_EOP             FLASH_IT_EOP            /*!< End of FLASH BANK1 Operation Interrupt source */
+
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
+#endif
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Flags 
+  * @{
+  */
+#ifdef STM32F10X_XL
+#define FLASH_FLAG_BANK2_BSY                 ((uint32_t)0x80000001)  /*!< FLASH BANK2 Busy flag */
+#define FLASH_FLAG_BANK2_EOP                 ((uint32_t)0x80000020)  /*!< FLASH BANK2 End of Operation flag */
+#define FLASH_FLAG_BANK2_PGERR               ((uint32_t)0x80000004)  /*!< FLASH BANK2 Program error flag */
+#define FLASH_FLAG_BANK2_WRPRTERR            ((uint32_t)0x80000010)  /*!< FLASH BANK2 Write protected error flag */
+
+#define FLASH_FLAG_BANK1_BSY                 FLASH_FLAG_BSY       /*!< FLASH BANK1 Busy flag*/
+#define FLASH_FLAG_BANK1_EOP                 FLASH_FLAG_EOP       /*!< FLASH BANK1 End of Operation flag */
+#define FLASH_FLAG_BANK1_PGERR               FLASH_FLAG_PGERR     /*!< FLASH BANK1 Program error flag */
+#define FLASH_FLAG_BANK1_WRPRTERR            FLASH_FLAG_WRPRTERR  /*!< FLASH BANK1 Write protected error flag */
+
+#define FLASH_FLAG_BSY                 ((uint32_t)0x00000001)  /*!< FLASH Busy flag */
+#define FLASH_FLAG_EOP                 ((uint32_t)0x00000020)  /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_PGERR               ((uint32_t)0x00000004)  /*!< FLASH Program error flag */
+#define FLASH_FLAG_WRPRTERR            ((uint32_t)0x00000010)  /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_OPTERR              ((uint32_t)0x00000001)  /*!< FLASH Option Byte error flag */
+ 
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0x7FFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG)  (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
+                                  ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
+                                  ((FLAG) == FLASH_FLAG_OPTERR)|| \
+                                  ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
+                                  ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
+                                  ((FLAG) == FLASH_FLAG_BANK2_BSY) || ((FLAG) == FLASH_FLAG_BANK2_EOP) || \
+                                  ((FLAG) == FLASH_FLAG_BANK2_PGERR) || ((FLAG) == FLASH_FLAG_BANK2_WRPRTERR))
+#else
+#define FLASH_FLAG_BSY                 ((uint32_t)0x00000001)  /*!< FLASH Busy flag */
+#define FLASH_FLAG_EOP                 ((uint32_t)0x00000020)  /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_PGERR               ((uint32_t)0x00000004)  /*!< FLASH Program error flag */
+#define FLASH_FLAG_WRPRTERR            ((uint32_t)0x00000010)  /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_OPTERR              ((uint32_t)0x00000001)  /*!< FLASH Option Byte error flag */
+
+#define FLASH_FLAG_BANK1_BSY                 FLASH_FLAG_BSY       /*!< FLASH BANK1 Busy flag*/
+#define FLASH_FLAG_BANK1_EOP                 FLASH_FLAG_EOP       /*!< FLASH BANK1 End of Operation flag */
+#define FLASH_FLAG_BANK1_PGERR               FLASH_FLAG_PGERR     /*!< FLASH BANK1 Program error flag */
+#define FLASH_FLAG_BANK1_WRPRTERR            FLASH_FLAG_WRPRTERR  /*!< FLASH BANK1 Write protected error flag */
+ 
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG)  (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
+                                  ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
+								  ((FLAG) == FLASH_FLAG_BANK1_BSY) || ((FLAG) == FLASH_FLAG_BANK1_EOP) || \
+                                  ((FLAG) == FLASH_FLAG_BANK1_PGERR) || ((FLAG) == FLASH_FLAG_BANK1_WRPRTERR) || \
+                                  ((FLAG) == FLASH_FLAG_OPTERR))
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Exported_Functions
+  * @{
+  */
+
+/*------------ Functions used for all STM32F10x devices -----*/
+void FLASH_SetLatency(uint32_t FLASH_Latency);
+void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess);
+void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer);
+void FLASH_Unlock(void);
+void FLASH_Lock(void);
+FLASH_Status FLASH_ErasePage(uint32_t Page_Address);
+FLASH_Status FLASH_EraseAllPages(void);
+FLASH_Status FLASH_EraseOptionBytes(void);
+FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data);
+FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data);
+FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data);
+FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages);
+FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState);
+FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY);
+uint32_t FLASH_GetUserOptionByte(void);
+uint32_t FLASH_GetWriteProtectionOptionByte(void);
+FlagStatus FLASH_GetReadOutProtectionStatus(void);
+FlagStatus FLASH_GetPrefetchBufferStatus(void);
+void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState);
+FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG);
+void FLASH_ClearFlag(uint32_t FLASH_FLAG);
+FLASH_Status FLASH_GetStatus(void);
+FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/*------------ New function used for all STM32F10x devices -----*/
+void FLASH_UnlockBank1(void);
+void FLASH_LockBank1(void);
+FLASH_Status FLASH_EraseAllBank1Pages(void);
+FLASH_Status FLASH_GetBank1Status(void);
+FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout);
+
+#ifdef STM32F10X_XL
+/*---- New Functions used only with STM32F10x_XL density devices -----*/
+void FLASH_UnlockBank2(void);
+void FLASH_LockBank2(void);
+FLASH_Status FLASH_EraseAllBank2Pages(void);
+FLASH_Status FLASH_GetBank2Status(void);
+FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout);
+FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT);
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_FLASH_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_fsmc.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_fsmc.h
new file mode 100644
index 0000000000000000000000000000000000000000..ee707e74394103d57ef5346539acf985d837b16b
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_fsmc.h
@@ -0,0 +1,733 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_fsmc.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the FSMC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_FSMC_H
+#define __STM32F10x_FSMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup FSMC
+  * @{
+  */
+
+/** @defgroup FSMC_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  Timing parameters For NOR/SRAM Banks  
+  */
+
+typedef struct
+{
+  uint32_t FSMC_AddressSetupTime;       /*!< Defines the number of HCLK cycles to configure
+                                             the duration of the address setup time. 
+                                             This parameter can be a value between 0 and 0xF.
+                                             @note: It is not used with synchronous NOR Flash memories. */
+
+  uint32_t FSMC_AddressHoldTime;        /*!< Defines the number of HCLK cycles to configure
+                                             the duration of the address hold time.
+                                             This parameter can be a value between 0 and 0xF. 
+                                             @note: It is not used with synchronous NOR Flash memories.*/
+
+  uint32_t FSMC_DataSetupTime;          /*!< Defines the number of HCLK cycles to configure
+                                             the duration of the data setup time.
+                                             This parameter can be a value between 0 and 0xFF.
+                                             @note: It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */
+
+  uint32_t FSMC_BusTurnAroundDuration;  /*!< Defines the number of HCLK cycles to configure
+                                             the duration of the bus turnaround.
+                                             This parameter can be a value between 0 and 0xF.
+                                             @note: It is only used for multiplexed NOR Flash memories. */
+
+  uint32_t FSMC_CLKDivision;            /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles.
+                                             This parameter can be a value between 1 and 0xF.
+                                             @note: This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */
+
+  uint32_t FSMC_DataLatency;            /*!< Defines the number of memory clock cycles to issue
+                                             to the memory before getting the first data.
+                                             The value of this parameter depends on the memory type as shown below:
+                                              - It must be set to 0 in case of a CRAM
+                                              - It is don't care in asynchronous NOR, SRAM or ROM accesses
+                                              - It may assume a value between 0 and 0xF in NOR Flash memories
+                                                with synchronous burst mode enable */
+
+  uint32_t FSMC_AccessMode;             /*!< Specifies the asynchronous access mode. 
+                                             This parameter can be a value of @ref FSMC_Access_Mode */
+}FSMC_NORSRAMTimingInitTypeDef;
+
+/** 
+  * @brief  FSMC NOR/SRAM Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t FSMC_Bank;                /*!< Specifies the NOR/SRAM memory bank that will be used.
+                                          This parameter can be a value of @ref FSMC_NORSRAM_Bank */
+
+  uint32_t FSMC_DataAddressMux;      /*!< Specifies whether the address and data values are
+                                          multiplexed on the databus or not. 
+                                          This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
+
+  uint32_t FSMC_MemoryType;          /*!< Specifies the type of external memory attached to
+                                          the corresponding memory bank.
+                                          This parameter can be a value of @ref FSMC_Memory_Type */
+
+  uint32_t FSMC_MemoryDataWidth;     /*!< Specifies the external memory device width.
+                                          This parameter can be a value of @ref FSMC_Data_Width */
+
+  uint32_t FSMC_BurstAccessMode;     /*!< Enables or disables the burst access mode for Flash memory,
+                                          valid only with synchronous burst Flash memories.
+                                          This parameter can be a value of @ref FSMC_Burst_Access_Mode */
+                                       
+  uint32_t FSMC_AsynchronousWait;     /*!< Enables or disables wait signal during asynchronous transfers,
+                                          valid only with asynchronous Flash memories.
+                                          This parameter can be a value of @ref FSMC_AsynchronousWait */
+
+  uint32_t FSMC_WaitSignalPolarity;  /*!< Specifies the wait signal polarity, valid only when accessing
+                                          the Flash memory in burst mode.
+                                          This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
+
+  uint32_t FSMC_WrapMode;            /*!< Enables or disables the Wrapped burst access mode for Flash
+                                          memory, valid only when accessing Flash memories in burst mode.
+                                          This parameter can be a value of @ref FSMC_Wrap_Mode */
+
+  uint32_t FSMC_WaitSignalActive;    /*!< Specifies if the wait signal is asserted by the memory one
+                                          clock cycle before the wait state or during the wait state,
+                                          valid only when accessing memories in burst mode. 
+                                          This parameter can be a value of @ref FSMC_Wait_Timing */
+
+  uint32_t FSMC_WriteOperation;      /*!< Enables or disables the write operation in the selected bank by the FSMC. 
+                                          This parameter can be a value of @ref FSMC_Write_Operation */
+
+  uint32_t FSMC_WaitSignal;          /*!< Enables or disables the wait-state insertion via wait
+                                          signal, valid for Flash memory access in burst mode. 
+                                          This parameter can be a value of @ref FSMC_Wait_Signal */
+
+  uint32_t FSMC_ExtendedMode;        /*!< Enables or disables the extended mode.
+                                          This parameter can be a value of @ref FSMC_Extended_Mode */
+
+  uint32_t FSMC_WriteBurst;          /*!< Enables or disables the write burst operation.
+                                          This parameter can be a value of @ref FSMC_Write_Burst */ 
+
+  FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the  ExtendedMode is not used*/  
+
+  FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct;     /*!< Timing Parameters for write access if the  ExtendedMode is used*/      
+}FSMC_NORSRAMInitTypeDef;
+
+/** 
+  * @brief  Timing parameters For FSMC NAND and PCCARD Banks
+  */
+
+typedef struct
+{
+  uint32_t FSMC_SetupTime;      /*!< Defines the number of HCLK cycles to setup address before
+                                     the command assertion for NAND-Flash read or write access
+                                     to common/Attribute or I/O memory space (depending on
+                                     the memory space timing to be configured).
+                                     This parameter can be a value between 0 and 0xFF.*/
+
+  uint32_t FSMC_WaitSetupTime;  /*!< Defines the minimum number of HCLK cycles to assert the
+                                     command for NAND-Flash read or write access to
+                                     common/Attribute or I/O memory space (depending on the
+                                     memory space timing to be configured). 
+                                     This parameter can be a number between 0x00 and 0xFF */
+
+  uint32_t FSMC_HoldSetupTime;  /*!< Defines the number of HCLK clock cycles to hold address
+                                     (and data for write access) after the command deassertion
+                                     for NAND-Flash read or write access to common/Attribute
+                                     or I/O memory space (depending on the memory space timing
+                                     to be configured).
+                                     This parameter can be a number between 0x00 and 0xFF */
+
+  uint32_t FSMC_HiZSetupTime;   /*!< Defines the number of HCLK clock cycles during which the
+                                     databus is kept in HiZ after the start of a NAND-Flash
+                                     write access to common/Attribute or I/O memory space (depending
+                                     on the memory space timing to be configured).
+                                     This parameter can be a number between 0x00 and 0xFF */
+}FSMC_NAND_PCCARDTimingInitTypeDef;
+
+/** 
+  * @brief  FSMC NAND Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t FSMC_Bank;              /*!< Specifies the NAND memory bank that will be used.
+                                      This parameter can be a value of @ref FSMC_NAND_Bank */
+
+  uint32_t FSMC_Waitfeature;      /*!< Enables or disables the Wait feature for the NAND Memory Bank.
+                                       This parameter can be any value of @ref FSMC_Wait_feature */
+
+  uint32_t FSMC_MemoryDataWidth;  /*!< Specifies the external memory device width.
+                                       This parameter can be any value of @ref FSMC_Data_Width */
+
+  uint32_t FSMC_ECC;              /*!< Enables or disables the ECC computation.
+                                       This parameter can be any value of @ref FSMC_ECC */
+
+  uint32_t FSMC_ECCPageSize;      /*!< Defines the page size for the extended ECC.
+                                       This parameter can be any value of @ref FSMC_ECC_Page_Size */
+
+  uint32_t FSMC_TCLRSetupTime;    /*!< Defines the number of HCLK cycles to configure the
+                                       delay between CLE low and RE low.
+                                       This parameter can be a value between 0 and 0xFF. */
+
+  uint32_t FSMC_TARSetupTime;     /*!< Defines the number of HCLK cycles to configure the
+                                       delay between ALE low and RE low.
+                                       This parameter can be a number between 0x0 and 0xFF */ 
+
+  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_CommonSpaceTimingStruct;   /*!< FSMC Common Space Timing */ 
+
+  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */
+}FSMC_NANDInitTypeDef;
+
+/** 
+  * @brief  FSMC PCCARD Init structure definition
+  */
+
+typedef struct
+{
+  uint32_t FSMC_Waitfeature;    /*!< Enables or disables the Wait feature for the Memory Bank.
+                                    This parameter can be any value of @ref FSMC_Wait_feature */
+
+  uint32_t FSMC_TCLRSetupTime;  /*!< Defines the number of HCLK cycles to configure the
+                                     delay between CLE low and RE low.
+                                     This parameter can be a value between 0 and 0xFF. */
+
+  uint32_t FSMC_TARSetupTime;   /*!< Defines the number of HCLK cycles to configure the
+                                     delay between ALE low and RE low.
+                                     This parameter can be a number between 0x0 and 0xFF */ 
+
+  
+  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */
+
+  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_AttributeSpaceTimingStruct;  /*!< FSMC Attribute Space Timing */ 
+  
+  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */  
+}FSMC_PCCARDInitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Exported_Constants
+  * @{
+  */
+
+/** @defgroup FSMC_NORSRAM_Bank 
+  * @{
+  */
+#define FSMC_Bank1_NORSRAM1                             ((uint32_t)0x00000000)
+#define FSMC_Bank1_NORSRAM2                             ((uint32_t)0x00000002)
+#define FSMC_Bank1_NORSRAM3                             ((uint32_t)0x00000004)
+#define FSMC_Bank1_NORSRAM4                             ((uint32_t)0x00000006)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_NAND_Bank 
+  * @{
+  */  
+#define FSMC_Bank2_NAND                                 ((uint32_t)0x00000010)
+#define FSMC_Bank3_NAND                                 ((uint32_t)0x00000100)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_PCCARD_Bank 
+  * @{
+  */    
+#define FSMC_Bank4_PCCARD                               ((uint32_t)0x00001000)
+/**
+  * @}
+  */
+
+#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \
+                                    ((BANK) == FSMC_Bank1_NORSRAM2) || \
+                                    ((BANK) == FSMC_Bank1_NORSRAM3) || \
+                                    ((BANK) == FSMC_Bank1_NORSRAM4))
+
+#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+                                 ((BANK) == FSMC_Bank3_NAND))
+
+#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+                                    ((BANK) == FSMC_Bank3_NAND) || \
+                                    ((BANK) == FSMC_Bank4_PCCARD))
+
+#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
+                               ((BANK) == FSMC_Bank3_NAND) || \
+                               ((BANK) == FSMC_Bank4_PCCARD))
+
+/** @defgroup NOR_SRAM_Controller 
+  * @{
+  */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing 
+  * @{
+  */
+
+#define FSMC_DataAddressMux_Disable                       ((uint32_t)0x00000000)
+#define FSMC_DataAddressMux_Enable                        ((uint32_t)0x00000002)
+#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \
+                          ((MUX) == FSMC_DataAddressMux_Enable))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Memory_Type 
+  * @{
+  */
+
+#define FSMC_MemoryType_SRAM                            ((uint32_t)0x00000000)
+#define FSMC_MemoryType_PSRAM                           ((uint32_t)0x00000004)
+#define FSMC_MemoryType_NOR                             ((uint32_t)0x00000008)
+#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \
+                                ((MEMORY) == FSMC_MemoryType_PSRAM)|| \
+                                ((MEMORY) == FSMC_MemoryType_NOR))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Data_Width 
+  * @{
+  */
+
+#define FSMC_MemoryDataWidth_8b                         ((uint32_t)0x00000000)
+#define FSMC_MemoryDataWidth_16b                        ((uint32_t)0x00000010)
+#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \
+                                     ((WIDTH) == FSMC_MemoryDataWidth_16b))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Burst_Access_Mode 
+  * @{
+  */
+
+#define FSMC_BurstAccessMode_Disable                    ((uint32_t)0x00000000) 
+#define FSMC_BurstAccessMode_Enable                     ((uint32_t)0x00000100)
+#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \
+                                  ((STATE) == FSMC_BurstAccessMode_Enable))
+/**
+  * @}
+  */
+  
+/** @defgroup FSMC_AsynchronousWait 
+  * @{
+  */
+#define FSMC_AsynchronousWait_Disable                   ((uint32_t)0x00000000)
+#define FSMC_AsynchronousWait_Enable                    ((uint32_t)0x00008000)
+#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_AsynchronousWait_Disable) || \
+                                 ((STATE) == FSMC_AsynchronousWait_Enable))
+
+/**
+  * @}
+  */
+  
+/** @defgroup FSMC_Wait_Signal_Polarity 
+  * @{
+  */
+
+#define FSMC_WaitSignalPolarity_Low                     ((uint32_t)0x00000000)
+#define FSMC_WaitSignalPolarity_High                    ((uint32_t)0x00000200)
+#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \
+                                         ((POLARITY) == FSMC_WaitSignalPolarity_High)) 
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wrap_Mode 
+  * @{
+  */
+
+#define FSMC_WrapMode_Disable                           ((uint32_t)0x00000000)
+#define FSMC_WrapMode_Enable                            ((uint32_t)0x00000400) 
+#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \
+                                 ((MODE) == FSMC_WrapMode_Enable))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Timing 
+  * @{
+  */
+
+#define FSMC_WaitSignalActive_BeforeWaitState           ((uint32_t)0x00000000)
+#define FSMC_WaitSignalActive_DuringWaitState           ((uint32_t)0x00000800) 
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \
+                                            ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Write_Operation 
+  * @{
+  */
+
+#define FSMC_WriteOperation_Disable                     ((uint32_t)0x00000000)
+#define FSMC_WriteOperation_Enable                      ((uint32_t)0x00001000)
+#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \
+                                            ((OPERATION) == FSMC_WriteOperation_Enable))
+                              
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Signal 
+  * @{
+  */
+
+#define FSMC_WaitSignal_Disable                         ((uint32_t)0x00000000)
+#define FSMC_WaitSignal_Enable                          ((uint32_t)0x00002000) 
+#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \
+                                      ((SIGNAL) == FSMC_WaitSignal_Enable))
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Extended_Mode 
+  * @{
+  */
+
+#define FSMC_ExtendedMode_Disable                       ((uint32_t)0x00000000)
+#define FSMC_ExtendedMode_Enable                        ((uint32_t)0x00004000)
+
+#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \
+                                     ((MODE) == FSMC_ExtendedMode_Enable)) 
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Write_Burst 
+  * @{
+  */
+
+#define FSMC_WriteBurst_Disable                         ((uint32_t)0x00000000)
+#define FSMC_WriteBurst_Enable                          ((uint32_t)0x00080000) 
+#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \
+                                    ((BURST) == FSMC_WriteBurst_Enable))
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Address_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Address_Hold_Time 
+  * @{
+  */
+
+#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Data_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Bus_Turn_around_Duration 
+  * @{
+  */
+
+#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_CLK_Division 
+  * @{
+  */
+
+#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Data_Latency 
+  * @{
+  */
+
+#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Access_Mode 
+  * @{
+  */
+
+#define FSMC_AccessMode_A                               ((uint32_t)0x00000000)
+#define FSMC_AccessMode_B                               ((uint32_t)0x10000000) 
+#define FSMC_AccessMode_C                               ((uint32_t)0x20000000)
+#define FSMC_AccessMode_D                               ((uint32_t)0x30000000)
+#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \
+                                   ((MODE) == FSMC_AccessMode_B) || \
+                                   ((MODE) == FSMC_AccessMode_C) || \
+                                   ((MODE) == FSMC_AccessMode_D)) 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/** @defgroup NAND_PCCARD_Controller 
+  * @{
+  */
+
+/** @defgroup FSMC_Wait_feature 
+  * @{
+  */
+
+#define FSMC_Waitfeature_Disable                        ((uint32_t)0x00000000)
+#define FSMC_Waitfeature_Enable                         ((uint32_t)0x00000002)
+#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \
+                                       ((FEATURE) == FSMC_Waitfeature_Enable))
+
+/**
+  * @}
+  */
+
+
+/** @defgroup FSMC_ECC 
+  * @{
+  */
+
+#define FSMC_ECC_Disable                                ((uint32_t)0x00000000)
+#define FSMC_ECC_Enable                                 ((uint32_t)0x00000040)
+#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \
+                                  ((STATE) == FSMC_ECC_Enable))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_ECC_Page_Size 
+  * @{
+  */
+
+#define FSMC_ECCPageSize_256Bytes                       ((uint32_t)0x00000000)
+#define FSMC_ECCPageSize_512Bytes                       ((uint32_t)0x00020000)
+#define FSMC_ECCPageSize_1024Bytes                      ((uint32_t)0x00040000)
+#define FSMC_ECCPageSize_2048Bytes                      ((uint32_t)0x00060000)
+#define FSMC_ECCPageSize_4096Bytes                      ((uint32_t)0x00080000)
+#define FSMC_ECCPageSize_8192Bytes                      ((uint32_t)0x000A0000)
+#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \
+                                    ((SIZE) == FSMC_ECCPageSize_512Bytes) || \
+                                    ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \
+                                    ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \
+                                    ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \
+                                    ((SIZE) == FSMC_ECCPageSize_8192Bytes))
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_TCLR_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_TAR_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Wait_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Hold_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_HiZ_Setup_Time 
+  * @{
+  */
+
+#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF)
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Interrupt_sources 
+  * @{
+  */
+
+#define FSMC_IT_RisingEdge                              ((uint32_t)0x00000008)
+#define FSMC_IT_Level                                   ((uint32_t)0x00000010)
+#define FSMC_IT_FallingEdge                             ((uint32_t)0x00000020)
+#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000))
+#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \
+                            ((IT) == FSMC_IT_Level) || \
+                            ((IT) == FSMC_IT_FallingEdge)) 
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Flags 
+  * @{
+  */
+
+#define FSMC_FLAG_RisingEdge                            ((uint32_t)0x00000001)
+#define FSMC_FLAG_Level                                 ((uint32_t)0x00000002)
+#define FSMC_FLAG_FallingEdge                           ((uint32_t)0x00000004)
+#define FSMC_FLAG_FEMPT                                 ((uint32_t)0x00000040)
+#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \
+                                ((FLAG) == FSMC_FLAG_Level) || \
+                                ((FLAG) == FSMC_FLAG_FallingEdge) || \
+                                ((FLAG) == FSMC_FLAG_FEMPT))
+
+#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Exported_Functions
+  * @{
+  */
+
+void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank);
+void FSMC_NANDDeInit(uint32_t FSMC_Bank);
+void FSMC_PCCARDDeInit(void);
+void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
+void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
+void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
+void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
+void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
+void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
+void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+void FSMC_PCCARDCmd(FunctionalState NewState);
+void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState);
+uint32_t FSMC_GetECC(uint32_t FSMC_Bank);
+void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState);
+FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
+void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG);
+ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT);
+void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_FSMC_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_gpio.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_gpio.h
new file mode 100644
index 0000000000000000000000000000000000000000..b8aa49a2a8b995c532948b53e3542c59d2054c7b
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_gpio.h
@@ -0,0 +1,385 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_gpio.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the GPIO 
+  *          firmware library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_GPIO_H
+#define __STM32F10x_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup GPIO
+  * @{
+  */
+
+/** @defgroup GPIO_Exported_Types
+  * @{
+  */
+
+#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
+                                    ((PERIPH) == GPIOB) || \
+                                    ((PERIPH) == GPIOC) || \
+                                    ((PERIPH) == GPIOD) || \
+                                    ((PERIPH) == GPIOE) || \
+                                    ((PERIPH) == GPIOF) || \
+                                    ((PERIPH) == GPIOG))
+                                     
+/** 
+  * @brief  Output Maximum frequency selection  
+  */
+
+typedef enum
+{ 
+  GPIO_Speed_10MHz = 1,
+  GPIO_Speed_2MHz, 
+  GPIO_Speed_50MHz
+}GPIOSpeed_TypeDef;
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \
+                              ((SPEED) == GPIO_Speed_50MHz))
+
+/** 
+  * @brief  Configuration Mode enumeration  
+  */
+
+typedef enum
+{ GPIO_Mode_AIN = 0x0,
+  GPIO_Mode_IN_FLOATING = 0x04,
+  GPIO_Mode_IPD = 0x28,
+  GPIO_Mode_IPU = 0x48,
+  GPIO_Mode_Out_OD = 0x14,
+  GPIO_Mode_Out_PP = 0x10,
+  GPIO_Mode_AF_OD = 0x1C,
+  GPIO_Mode_AF_PP = 0x18
+}GPIOMode_TypeDef;
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \
+                            ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \
+                            ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \
+                            ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP))
+
+/** 
+  * @brief  GPIO Init structure definition  
+  */
+
+typedef struct
+{
+  uint16_t GPIO_Pin;             /*!< Specifies the GPIO pins to be configured.
+                                      This parameter can be any value of @ref GPIO_pins_define */
+
+  GPIOSpeed_TypeDef GPIO_Speed;  /*!< Specifies the speed for the selected pins.
+                                      This parameter can be a value of @ref GPIOSpeed_TypeDef */
+
+  GPIOMode_TypeDef GPIO_Mode;    /*!< Specifies the operating mode for the selected pins.
+                                      This parameter can be a value of @ref GPIOMode_TypeDef */
+}GPIO_InitTypeDef;
+
+
+/** 
+  * @brief  Bit_SET and Bit_RESET enumeration  
+  */
+
+typedef enum
+{ Bit_RESET = 0,
+  Bit_SET
+}BitAction;
+
+#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Constants
+  * @{
+  */
+
+/** @defgroup GPIO_pins_define 
+  * @{
+  */
+
+#define GPIO_Pin_0                 ((uint16_t)0x0001)  /*!< Pin 0 selected */
+#define GPIO_Pin_1                 ((uint16_t)0x0002)  /*!< Pin 1 selected */
+#define GPIO_Pin_2                 ((uint16_t)0x0004)  /*!< Pin 2 selected */
+#define GPIO_Pin_3                 ((uint16_t)0x0008)  /*!< Pin 3 selected */
+#define GPIO_Pin_4                 ((uint16_t)0x0010)  /*!< Pin 4 selected */
+#define GPIO_Pin_5                 ((uint16_t)0x0020)  /*!< Pin 5 selected */
+#define GPIO_Pin_6                 ((uint16_t)0x0040)  /*!< Pin 6 selected */
+#define GPIO_Pin_7                 ((uint16_t)0x0080)  /*!< Pin 7 selected */
+#define GPIO_Pin_8                 ((uint16_t)0x0100)  /*!< Pin 8 selected */
+#define GPIO_Pin_9                 ((uint16_t)0x0200)  /*!< Pin 9 selected */
+#define GPIO_Pin_10                ((uint16_t)0x0400)  /*!< Pin 10 selected */
+#define GPIO_Pin_11                ((uint16_t)0x0800)  /*!< Pin 11 selected */
+#define GPIO_Pin_12                ((uint16_t)0x1000)  /*!< Pin 12 selected */
+#define GPIO_Pin_13                ((uint16_t)0x2000)  /*!< Pin 13 selected */
+#define GPIO_Pin_14                ((uint16_t)0x4000)  /*!< Pin 14 selected */
+#define GPIO_Pin_15                ((uint16_t)0x8000)  /*!< Pin 15 selected */
+#define GPIO_Pin_All               ((uint16_t)0xFFFF)  /*!< All pins selected */
+
+#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00))
+
+#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
+                              ((PIN) == GPIO_Pin_1) || \
+                              ((PIN) == GPIO_Pin_2) || \
+                              ((PIN) == GPIO_Pin_3) || \
+                              ((PIN) == GPIO_Pin_4) || \
+                              ((PIN) == GPIO_Pin_5) || \
+                              ((PIN) == GPIO_Pin_6) || \
+                              ((PIN) == GPIO_Pin_7) || \
+                              ((PIN) == GPIO_Pin_8) || \
+                              ((PIN) == GPIO_Pin_9) || \
+                              ((PIN) == GPIO_Pin_10) || \
+                              ((PIN) == GPIO_Pin_11) || \
+                              ((PIN) == GPIO_Pin_12) || \
+                              ((PIN) == GPIO_Pin_13) || \
+                              ((PIN) == GPIO_Pin_14) || \
+                              ((PIN) == GPIO_Pin_15))
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Remap_define 
+  * @{
+  */
+
+#define GPIO_Remap_SPI1             ((uint32_t)0x00000001)  /*!< SPI1 Alternate Function mapping */
+#define GPIO_Remap_I2C1             ((uint32_t)0x00000002)  /*!< I2C1 Alternate Function mapping */
+#define GPIO_Remap_USART1           ((uint32_t)0x00000004)  /*!< USART1 Alternate Function mapping */
+#define GPIO_Remap_USART2           ((uint32_t)0x00000008)  /*!< USART2 Alternate Function mapping */
+#define GPIO_PartialRemap_USART3    ((uint32_t)0x00140010)  /*!< USART3 Partial Alternate Function mapping */
+#define GPIO_FullRemap_USART3       ((uint32_t)0x00140030)  /*!< USART3 Full Alternate Function mapping */
+#define GPIO_PartialRemap_TIM1      ((uint32_t)0x00160040)  /*!< TIM1 Partial Alternate Function mapping */
+#define GPIO_FullRemap_TIM1         ((uint32_t)0x001600C0)  /*!< TIM1 Full Alternate Function mapping */
+#define GPIO_PartialRemap1_TIM2     ((uint32_t)0x00180100)  /*!< TIM2 Partial1 Alternate Function mapping */
+#define GPIO_PartialRemap2_TIM2     ((uint32_t)0x00180200)  /*!< TIM2 Partial2 Alternate Function mapping */
+#define GPIO_FullRemap_TIM2         ((uint32_t)0x00180300)  /*!< TIM2 Full Alternate Function mapping */
+#define GPIO_PartialRemap_TIM3      ((uint32_t)0x001A0800)  /*!< TIM3 Partial Alternate Function mapping */
+#define GPIO_FullRemap_TIM3         ((uint32_t)0x001A0C00)  /*!< TIM3 Full Alternate Function mapping */
+#define GPIO_Remap_TIM4             ((uint32_t)0x00001000)  /*!< TIM4 Alternate Function mapping */
+#define GPIO_Remap1_CAN1            ((uint32_t)0x001D4000)  /*!< CAN1 Alternate Function mapping */
+#define GPIO_Remap2_CAN1            ((uint32_t)0x001D6000)  /*!< CAN1 Alternate Function mapping */
+#define GPIO_Remap_PD01             ((uint32_t)0x00008000)  /*!< PD01 Alternate Function mapping */
+#define GPIO_Remap_TIM5CH4_LSI      ((uint32_t)0x00200001)  /*!< LSI connected to TIM5 Channel4 input capture for calibration */
+#define GPIO_Remap_ADC1_ETRGINJ     ((uint32_t)0x00200002)  /*!< ADC1 External Trigger Injected Conversion remapping */
+#define GPIO_Remap_ADC1_ETRGREG     ((uint32_t)0x00200004)  /*!< ADC1 External Trigger Regular Conversion remapping */
+#define GPIO_Remap_ADC2_ETRGINJ     ((uint32_t)0x00200008)  /*!< ADC2 External Trigger Injected Conversion remapping */
+#define GPIO_Remap_ADC2_ETRGREG     ((uint32_t)0x00200010)  /*!< ADC2 External Trigger Regular Conversion remapping */
+#define GPIO_Remap_ETH              ((uint32_t)0x00200020)  /*!< Ethernet remapping (only for Connectivity line devices) */
+#define GPIO_Remap_CAN2             ((uint32_t)0x00200040)  /*!< CAN2 remapping (only for Connectivity line devices) */
+#define GPIO_Remap_SWJ_NoJTRST      ((uint32_t)0x00300100)  /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */
+#define GPIO_Remap_SWJ_JTAGDisable  ((uint32_t)0x00300200)  /*!< JTAG-DP Disabled and SW-DP Enabled */
+#define GPIO_Remap_SWJ_Disable      ((uint32_t)0x00300400)  /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */
+#define GPIO_Remap_SPI3             ((uint32_t)0x00201100)  /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
+#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000)  /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected
+                                                                 to TIM2 Internal Trigger 1 for calibration
+                                                                 (only for Connectivity line devices) */
+#define GPIO_Remap_PTP_PPS          ((uint32_t)0x00204000)  /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */
+
+#define GPIO_Remap_TIM15            ((uint32_t)0x80000001)  /*!< TIM15 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM16            ((uint32_t)0x80000002)  /*!< TIM16 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM17            ((uint32_t)0x80000004)  /*!< TIM17 Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_CEC              ((uint32_t)0x80000008)  /*!< CEC Alternate Function mapping (only for Value line devices) */
+#define GPIO_Remap_TIM1_DMA         ((uint32_t)0x80000010)  /*!< TIM1 DMA requests mapping (only for Value line devices) */
+
+#define GPIO_Remap_TIM9             ((uint32_t)0x80000020)  /*!< TIM9 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM10            ((uint32_t)0x80000040)  /*!< TIM10 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM11            ((uint32_t)0x80000080)  /*!< TIM11 Alternate Function mapping (only for XL-density devices) */
+#define GPIO_Remap_TIM13            ((uint32_t)0x80000100)  /*!< TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) */
+#define GPIO_Remap_TIM14            ((uint32_t)0x80000200)  /*!< TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) */
+#define GPIO_Remap_FSMC_NADV        ((uint32_t)0x80000400)  /*!< FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) */
+
+#define GPIO_Remap_TIM67_DAC_DMA    ((uint32_t)0x80000800)  /*!< TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) */
+#define GPIO_Remap_TIM12            ((uint32_t)0x80001000)  /*!< TIM12 Alternate Function mapping (only for High density Value line devices) */
+#define GPIO_Remap_MISC             ((uint32_t)0x80002000)  /*!< Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, 
+                                                                 only for High density Value line devices) */                                                       
+
+#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \
+                              ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \
+                              ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \
+                              ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \
+                              ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \
+                              ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \
+                              ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \
+                              ((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \
+                              ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \
+                              ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \
+                              ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \
+                              ((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \
+                              ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \
+                              ((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \
+                              ((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS) || \
+                              ((REMAP) == GPIO_Remap_TIM15) || ((REMAP) == GPIO_Remap_TIM16) || \
+                              ((REMAP) == GPIO_Remap_TIM17) || ((REMAP) == GPIO_Remap_CEC) || \
+                              ((REMAP) == GPIO_Remap_TIM1_DMA) || ((REMAP) == GPIO_Remap_TIM9) || \
+                              ((REMAP) == GPIO_Remap_TIM10) || ((REMAP) == GPIO_Remap_TIM11) || \
+                              ((REMAP) == GPIO_Remap_TIM13) || ((REMAP) == GPIO_Remap_TIM14) || \
+                              ((REMAP) == GPIO_Remap_FSMC_NADV) || ((REMAP) == GPIO_Remap_TIM67_DAC_DMA) || \
+                              ((REMAP) == GPIO_Remap_TIM12) || ((REMAP) == GPIO_Remap_MISC))
+                              
+/**
+  * @}
+  */ 
+
+/** @defgroup GPIO_Port_Sources 
+  * @{
+  */
+
+#define GPIO_PortSourceGPIOA       ((uint8_t)0x00)
+#define GPIO_PortSourceGPIOB       ((uint8_t)0x01)
+#define GPIO_PortSourceGPIOC       ((uint8_t)0x02)
+#define GPIO_PortSourceGPIOD       ((uint8_t)0x03)
+#define GPIO_PortSourceGPIOE       ((uint8_t)0x04)
+#define GPIO_PortSourceGPIOF       ((uint8_t)0x05)
+#define GPIO_PortSourceGPIOG       ((uint8_t)0x06)
+#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
+                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
+                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
+                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
+                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOE))
+
+#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \
+                                              ((PORTSOURCE) == GPIO_PortSourceGPIOG))
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Pin_sources 
+  * @{
+  */
+
+#define GPIO_PinSource0            ((uint8_t)0x00)
+#define GPIO_PinSource1            ((uint8_t)0x01)
+#define GPIO_PinSource2            ((uint8_t)0x02)
+#define GPIO_PinSource3            ((uint8_t)0x03)
+#define GPIO_PinSource4            ((uint8_t)0x04)
+#define GPIO_PinSource5            ((uint8_t)0x05)
+#define GPIO_PinSource6            ((uint8_t)0x06)
+#define GPIO_PinSource7            ((uint8_t)0x07)
+#define GPIO_PinSource8            ((uint8_t)0x08)
+#define GPIO_PinSource9            ((uint8_t)0x09)
+#define GPIO_PinSource10           ((uint8_t)0x0A)
+#define GPIO_PinSource11           ((uint8_t)0x0B)
+#define GPIO_PinSource12           ((uint8_t)0x0C)
+#define GPIO_PinSource13           ((uint8_t)0x0D)
+#define GPIO_PinSource14           ((uint8_t)0x0E)
+#define GPIO_PinSource15           ((uint8_t)0x0F)
+
+#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
+                                       ((PINSOURCE) == GPIO_PinSource1) || \
+                                       ((PINSOURCE) == GPIO_PinSource2) || \
+                                       ((PINSOURCE) == GPIO_PinSource3) || \
+                                       ((PINSOURCE) == GPIO_PinSource4) || \
+                                       ((PINSOURCE) == GPIO_PinSource5) || \
+                                       ((PINSOURCE) == GPIO_PinSource6) || \
+                                       ((PINSOURCE) == GPIO_PinSource7) || \
+                                       ((PINSOURCE) == GPIO_PinSource8) || \
+                                       ((PINSOURCE) == GPIO_PinSource9) || \
+                                       ((PINSOURCE) == GPIO_PinSource10) || \
+                                       ((PINSOURCE) == GPIO_PinSource11) || \
+                                       ((PINSOURCE) == GPIO_PinSource12) || \
+                                       ((PINSOURCE) == GPIO_PinSource13) || \
+                                       ((PINSOURCE) == GPIO_PinSource14) || \
+                                       ((PINSOURCE) == GPIO_PinSource15))
+
+/**
+  * @}
+  */
+
+/** @defgroup Ethernet_Media_Interface 
+  * @{
+  */ 
+#define GPIO_ETH_MediaInterface_MII    ((u32)0x00000000) 
+#define GPIO_ETH_MediaInterface_RMII   ((u32)0x00000001)                                       
+
+#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \
+                                                ((INTERFACE) == GPIO_ETH_MediaInterface_RMII))
+
+/**
+  * @}
+  */                                                
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Exported_Functions
+  * @{
+  */
+
+void GPIO_DeInit(GPIO_TypeDef* GPIOx);
+void GPIO_AFIODeInit(void);
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
+void GPIO_EventOutputCmd(FunctionalState NewState);
+void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState);
+void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
+void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_GPIO_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_i2c.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_i2c.h
new file mode 100644
index 0000000000000000000000000000000000000000..2d42e5ce366aa55d0f050202a921df49105b9bf6
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_i2c.h
@@ -0,0 +1,684 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_i2c.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the I2C firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_I2C_H
+#define __STM32F10x_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup I2C
+  * @{
+  */
+
+/** @defgroup I2C_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  I2C Init structure definition  
+  */
+
+typedef struct
+{
+  uint32_t I2C_ClockSpeed;          /*!< Specifies the clock frequency.
+                                         This parameter must be set to a value lower than 400kHz */
+
+  uint16_t I2C_Mode;                /*!< Specifies the I2C mode.
+                                         This parameter can be a value of @ref I2C_mode */
+
+  uint16_t I2C_DutyCycle;           /*!< Specifies the I2C fast mode duty cycle.
+                                         This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+  uint16_t I2C_OwnAddress1;         /*!< Specifies the first device own address.
+                                         This parameter can be a 7-bit or 10-bit address. */
+
+  uint16_t I2C_Ack;                 /*!< Enables or disables the acknowledgement.
+                                         This parameter can be a value of @ref I2C_acknowledgement */
+
+  uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged.
+                                         This parameter can be a value of @ref I2C_acknowledged_address */
+}I2C_InitTypeDef;
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup I2C_Exported_Constants
+  * @{
+  */
+
+#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \
+                                   ((PERIPH) == I2C2))
+/** @defgroup I2C_mode 
+  * @{
+  */
+
+#define I2C_Mode_I2C                    ((uint16_t)0x0000)
+#define I2C_Mode_SMBusDevice            ((uint16_t)0x0002)  
+#define I2C_Mode_SMBusHost              ((uint16_t)0x000A)
+#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \
+                           ((MODE) == I2C_Mode_SMBusDevice) || \
+                           ((MODE) == I2C_Mode_SMBusHost))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode 
+  * @{
+  */
+
+#define I2C_DutyCycle_16_9              ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */
+#define I2C_DutyCycle_2                 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \
+                                  ((CYCLE) == I2C_DutyCycle_2))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2C_acknowledgement
+  * @{
+  */
+
+#define I2C_Ack_Enable                  ((uint16_t)0x0400)
+#define I2C_Ack_Disable                 ((uint16_t)0x0000)
+#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \
+                                 ((STATE) == I2C_Ack_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_transfer_direction 
+  * @{
+  */
+
+#define  I2C_Direction_Transmitter      ((uint8_t)0x00)
+#define  I2C_Direction_Receiver         ((uint8_t)0x01)
+#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \
+                                     ((DIRECTION) == I2C_Direction_Receiver))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_acknowledged_address 
+  * @{
+  */
+
+#define I2C_AcknowledgedAddress_7bit    ((uint16_t)0x4000)
+#define I2C_AcknowledgedAddress_10bit   ((uint16_t)0xC000)
+#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \
+                                             ((ADDRESS) == I2C_AcknowledgedAddress_10bit))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2C_registers 
+  * @{
+  */
+
+#define I2C_Register_CR1                ((uint8_t)0x00)
+#define I2C_Register_CR2                ((uint8_t)0x04)
+#define I2C_Register_OAR1               ((uint8_t)0x08)
+#define I2C_Register_OAR2               ((uint8_t)0x0C)
+#define I2C_Register_DR                 ((uint8_t)0x10)
+#define I2C_Register_SR1                ((uint8_t)0x14)
+#define I2C_Register_SR2                ((uint8_t)0x18)
+#define I2C_Register_CCR                ((uint8_t)0x1C)
+#define I2C_Register_TRISE              ((uint8_t)0x20)
+#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \
+                                   ((REGISTER) == I2C_Register_CR2) || \
+                                   ((REGISTER) == I2C_Register_OAR1) || \
+                                   ((REGISTER) == I2C_Register_OAR2) || \
+                                   ((REGISTER) == I2C_Register_DR) || \
+                                   ((REGISTER) == I2C_Register_SR1) || \
+                                   ((REGISTER) == I2C_Register_SR2) || \
+                                   ((REGISTER) == I2C_Register_CCR) || \
+                                   ((REGISTER) == I2C_Register_TRISE))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_SMBus_alert_pin_level 
+  * @{
+  */
+
+#define I2C_SMBusAlert_Low              ((uint16_t)0x2000)
+#define I2C_SMBusAlert_High             ((uint16_t)0xDFFF)
+#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \
+                                   ((ALERT) == I2C_SMBusAlert_High))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_PEC_position 
+  * @{
+  */
+
+#define I2C_PECPosition_Next            ((uint16_t)0x0800)
+#define I2C_PECPosition_Current         ((uint16_t)0xF7FF)
+#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \
+                                       ((POSITION) == I2C_PECPosition_Current))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2C_NCAK_position 
+  * @{
+  */
+
+#define I2C_NACKPosition_Next           ((uint16_t)0x0800)
+#define I2C_NACKPosition_Current        ((uint16_t)0xF7FF)
+#define IS_I2C_NACK_POSITION(POSITION)  (((POSITION) == I2C_NACKPosition_Next) || \
+                                         ((POSITION) == I2C_NACKPosition_Current))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2C_interrupts_definition 
+  * @{
+  */
+
+#define I2C_IT_BUF                      ((uint16_t)0x0400)
+#define I2C_IT_EVT                      ((uint16_t)0x0200)
+#define I2C_IT_ERR                      ((uint16_t)0x0100)
+#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2C_interrupts_definition 
+  * @{
+  */
+
+#define I2C_IT_SMBALERT                 ((uint32_t)0x01008000)
+#define I2C_IT_TIMEOUT                  ((uint32_t)0x01004000)
+#define I2C_IT_PECERR                   ((uint32_t)0x01001000)
+#define I2C_IT_OVR                      ((uint32_t)0x01000800)
+#define I2C_IT_AF                       ((uint32_t)0x01000400)
+#define I2C_IT_ARLO                     ((uint32_t)0x01000200)
+#define I2C_IT_BERR                     ((uint32_t)0x01000100)
+#define I2C_IT_TXE                      ((uint32_t)0x06000080)
+#define I2C_IT_RXNE                     ((uint32_t)0x06000040)
+#define I2C_IT_STOPF                    ((uint32_t)0x02000010)
+#define I2C_IT_ADD10                    ((uint32_t)0x02000008)
+#define I2C_IT_BTF                      ((uint32_t)0x02000004)
+#define I2C_IT_ADDR                     ((uint32_t)0x02000002)
+#define I2C_IT_SB                       ((uint32_t)0x02000001)
+
+#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00))
+
+#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \
+                           ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \
+                           ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \
+                           ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \
+                           ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \
+                           ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \
+                           ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_flags_definition 
+  * @{
+  */
+
+/** 
+  * @brief  SR2 register flags  
+  */
+
+#define I2C_FLAG_DUALF                  ((uint32_t)0x00800000)
+#define I2C_FLAG_SMBHOST                ((uint32_t)0x00400000)
+#define I2C_FLAG_SMBDEFAULT             ((uint32_t)0x00200000)
+#define I2C_FLAG_GENCALL                ((uint32_t)0x00100000)
+#define I2C_FLAG_TRA                    ((uint32_t)0x00040000)
+#define I2C_FLAG_BUSY                   ((uint32_t)0x00020000)
+#define I2C_FLAG_MSL                    ((uint32_t)0x00010000)
+
+/** 
+  * @brief  SR1 register flags  
+  */
+
+#define I2C_FLAG_SMBALERT               ((uint32_t)0x10008000)
+#define I2C_FLAG_TIMEOUT                ((uint32_t)0x10004000)
+#define I2C_FLAG_PECERR                 ((uint32_t)0x10001000)
+#define I2C_FLAG_OVR                    ((uint32_t)0x10000800)
+#define I2C_FLAG_AF                     ((uint32_t)0x10000400)
+#define I2C_FLAG_ARLO                   ((uint32_t)0x10000200)
+#define I2C_FLAG_BERR                   ((uint32_t)0x10000100)
+#define I2C_FLAG_TXE                    ((uint32_t)0x10000080)
+#define I2C_FLAG_RXNE                   ((uint32_t)0x10000040)
+#define I2C_FLAG_STOPF                  ((uint32_t)0x10000010)
+#define I2C_FLAG_ADD10                  ((uint32_t)0x10000008)
+#define I2C_FLAG_BTF                    ((uint32_t)0x10000004)
+#define I2C_FLAG_ADDR                   ((uint32_t)0x10000002)
+#define I2C_FLAG_SB                     ((uint32_t)0x10000001)
+
+#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00))
+
+#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \
+                               ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \
+                               ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \
+                               ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \
+                               ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \
+                               ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \
+                               ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \
+                               ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \
+                               ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \
+                               ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \
+                               ((FLAG) == I2C_FLAG_SB))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Events 
+  * @{
+  */
+
+/*========================================
+     
+                     I2C Master Events (Events grouped in order of communication)
+                                                        ==========================================*/
+/** 
+  * @brief  Communication start
+  * 
+  * After sending the START condition (I2C_GenerateSTART() function) the master 
+  * has to wait for this event. It means that the Start condition has been correctly 
+  * released on the I2C bus (the bus is free, no other devices is communicating).
+  * 
+  */
+/* --EV5 */
+#define  I2C_EVENT_MASTER_MODE_SELECT                      ((uint32_t)0x00030001)  /* BUSY, MSL and SB flag */
+
+/** 
+  * @brief  Address Acknowledge
+  * 
+  * After checking on EV5 (start condition correctly released on the bus), the 
+  * master sends the address of the slave(s) with which it will communicate 
+  * (I2C_Send7bitAddress() function, it also determines the direction of the communication: 
+  * Master transmitter or Receiver). Then the master has to wait that a slave acknowledges 
+  * his address. If an acknowledge is sent on the bus, one of the following events will 
+  * be set:
+  * 
+  *  1) In case of Master Receiver (7-bit addressing): the I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED 
+  *     event is set.
+  *  
+  *  2) In case of Master Transmitter (7-bit addressing): the I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED 
+  *     is set
+  *  
+  *  3) In case of 10-Bit addressing mode, the master (just after generating the START 
+  *  and checking on EV5) has to send the header of 10-bit addressing mode (I2C_SendData() 
+  *  function). Then master should wait on EV9. It means that the 10-bit addressing 
+  *  header has been correctly sent on the bus. Then master should send the second part of 
+  *  the 10-bit address (LSB) using the function I2C_Send7bitAddress(). Then master 
+  *  should wait for event EV6. 
+  *     
+  */
+
+/* --EV6 */
+#define  I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED        ((uint32_t)0x00070082)  /* BUSY, MSL, ADDR, TXE and TRA flags */
+#define  I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED           ((uint32_t)0x00030002)  /* BUSY, MSL and ADDR flags */
+/* --EV9 */
+#define  I2C_EVENT_MASTER_MODE_ADDRESS10                   ((uint32_t)0x00030008)  /* BUSY, MSL and ADD10 flags */
+
+/** 
+  * @brief Communication events
+  * 
+  * If a communication is established (START condition generated and slave address 
+  * acknowledged) then the master has to check on one of the following events for 
+  * communication procedures:
+  *  
+  * 1) Master Receiver mode: The master has to wait on the event EV7 then to read 
+  *    the data received from the slave (I2C_ReceiveData() function).
+  * 
+  * 2) Master Transmitter mode: The master has to send data (I2C_SendData() 
+  *    function) then to wait on event EV8 or EV8_2.
+  *    These two events are similar: 
+  *     - EV8 means that the data has been written in the data register and is 
+  *       being shifted out.
+  *     - EV8_2 means that the data has been physically shifted out and output 
+  *       on the bus.
+  *     In most cases, using EV8 is sufficient for the application.
+  *     Using EV8_2 leads to a slower communication but ensure more reliable test.
+  *     EV8_2 is also more suitable than EV8 for testing on the last data transmission 
+  *     (before Stop condition generation).
+  *     
+  *  @note In case the  user software does not guarantee that this event EV7 is 
+  *  managed before the current byte end of transfer, then user may check on EV7 
+  *  and BTF flag at the same time (ie. (I2C_EVENT_MASTER_BYTE_RECEIVED | I2C_FLAG_BTF)).
+  *  In this case the communication may be slower.
+  * 
+  */
+
+/* Master RECEIVER mode -----------------------------*/ 
+/* --EV7 */
+#define  I2C_EVENT_MASTER_BYTE_RECEIVED                    ((uint32_t)0x00030040)  /* BUSY, MSL and RXNE flags */
+
+/* Master TRANSMITTER mode --------------------------*/
+/* --EV8 */
+#define I2C_EVENT_MASTER_BYTE_TRANSMITTING                 ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */
+/* --EV8_2 */
+#define  I2C_EVENT_MASTER_BYTE_TRANSMITTED                 ((uint32_t)0x00070084)  /* TRA, BUSY, MSL, TXE and BTF flags */
+
+
+/*========================================
+     
+                     I2C Slave Events (Events grouped in order of communication)
+                                                        ==========================================*/
+
+/** 
+  * @brief  Communication start events
+  * 
+  * Wait on one of these events at the start of the communication. It means that 
+  * the I2C peripheral detected a Start condition on the bus (generated by master 
+  * device) followed by the peripheral address. The peripheral generates an ACK 
+  * condition on the bus (if the acknowledge feature is enabled through function 
+  * I2C_AcknowledgeConfig()) and the events listed above are set :
+  *  
+  * 1) In normal case (only one address managed by the slave), when the address 
+  *   sent by the master matches the own address of the peripheral (configured by 
+  *   I2C_OwnAddress1 field) the I2C_EVENT_SLAVE_XXX_ADDRESS_MATCHED event is set 
+  *   (where XXX could be TRANSMITTER or RECEIVER).
+  *    
+  * 2) In case the address sent by the master matches the second address of the 
+  *   peripheral (configured by the function I2C_OwnAddress2Config() and enabled 
+  *   by the function I2C_DualAddressCmd()) the events I2C_EVENT_SLAVE_XXX_SECONDADDRESS_MATCHED 
+  *   (where XXX could be TRANSMITTER or RECEIVER) are set.
+  *   
+  * 3) In case the address sent by the master is General Call (address 0x00) and 
+  *   if the General Call is enabled for the peripheral (using function I2C_GeneralCallCmd()) 
+  *   the following event is set I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED.   
+  * 
+  */
+
+/* --EV1  (all the events below are variants of EV1) */   
+/* 1) Case of One Single Address managed by the slave */
+#define  I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED          ((uint32_t)0x00020002) /* BUSY and ADDR flags */
+#define  I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED       ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */
+
+/* 2) Case of Dual address managed by the slave */
+#define  I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED    ((uint32_t)0x00820000)  /* DUALF and BUSY flags */
+#define  I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080)  /* DUALF, TRA, BUSY and TXE flags */
+
+/* 3) Case of General Call enabled for the slave */
+#define  I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED        ((uint32_t)0x00120000)  /* GENCALL and BUSY flags */
+
+/** 
+  * @brief  Communication events
+  * 
+  * Wait on one of these events when EV1 has already been checked and: 
+  * 
+  * - Slave RECEIVER mode:
+  *     - EV2: When the application is expecting a data byte to be received. 
+  *     - EV4: When the application is expecting the end of the communication: master 
+  *       sends a stop condition and data transmission is stopped.
+  *    
+  * - Slave Transmitter mode:
+  *    - EV3: When a byte has been transmitted by the slave and the application is expecting 
+  *      the end of the byte transmission. The two events I2C_EVENT_SLAVE_BYTE_TRANSMITTED and
+  *      I2C_EVENT_SLAVE_BYTE_TRANSMITTING are similar. The second one can optionally be 
+  *      used when the user software doesn't guarantee the EV3 is managed before the
+  *      current byte end of transfer.
+  *    - EV3_2: When the master sends a NACK in order to tell slave that data transmission 
+  *      shall end (before sending the STOP condition). In this case slave has to stop sending 
+  *      data bytes and expect a Stop condition on the bus.
+  *      
+  *  @note In case the  user software does not guarantee that the event EV2 is 
+  *  managed before the current byte end of transfer, then user may check on EV2 
+  *  and BTF flag at the same time (ie. (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_BTF)).
+  * In this case the communication may be slower.
+  *
+  */
+
+/* Slave RECEIVER mode --------------------------*/ 
+/* --EV2 */
+#define  I2C_EVENT_SLAVE_BYTE_RECEIVED                     ((uint32_t)0x00020040)  /* BUSY and RXNE flags */
+/* --EV4  */
+#define  I2C_EVENT_SLAVE_STOP_DETECTED                     ((uint32_t)0x00000010)  /* STOPF flag */
+
+/* Slave TRANSMITTER mode -----------------------*/
+/* --EV3 */
+#define  I2C_EVENT_SLAVE_BYTE_TRANSMITTED                  ((uint32_t)0x00060084)  /* TRA, BUSY, TXE and BTF flags */
+#define  I2C_EVENT_SLAVE_BYTE_TRANSMITTING                 ((uint32_t)0x00060080)  /* TRA, BUSY and TXE flags */
+/* --EV3_2 */
+#define  I2C_EVENT_SLAVE_ACK_FAILURE                       ((uint32_t)0x00000400)  /* AF flag */
+
+/*===========================      End of Events Description           ==========================================*/
+
+#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \
+                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \
+                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \
+                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \
+                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \
+                             ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \
+                             ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \
+                             ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \
+                             ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \
+                             ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \
+                             ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \
+                             ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \
+                             ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE))
+/**
+  * @}
+  */
+
+/** @defgroup I2C_own_address1 
+  * @{
+  */
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF)
+/**
+  * @}
+  */
+
+/** @defgroup I2C_clock_speed 
+  * @{
+  */
+
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Exported_Functions
+  * @{
+  */
+
+void I2C_DeInit(I2C_TypeDef* I2Cx);
+void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct);
+void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct);
+void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address);
+void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState);
+void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data);
+uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx);
+void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction);
+uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register);
+void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition);
+void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert);
+void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition);
+void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
+uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx);
+void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
+void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle);
+
+/**
+ * @brief
+ ****************************************************************************************
+ *
+ *                         I2C State Monitoring Functions
+ *                       
+ ****************************************************************************************   
+ * This I2C driver provides three different ways for I2C state monitoring
+ *  depending on the application requirements and constraints:
+ *        
+ *  
+ * 1) Basic state monitoring:
+ *    Using I2C_CheckEvent() function:
+ *    It compares the status registers (SR1 and SR2) content to a given event
+ *    (can be the combination of one or more flags).
+ *    It returns SUCCESS if the current status includes the given flags 
+ *    and returns ERROR if one or more flags are missing in the current status.
+ *    - When to use:
+ *      - This function is suitable for most applications as well as for startup 
+ *      activity since the events are fully described in the product reference manual 
+ *      (RM0008).
+ *      - It is also suitable for users who need to define their own events.
+ *    - Limitations:
+ *      - If an error occurs (ie. error flags are set besides to the monitored flags),
+ *        the I2C_CheckEvent() function may return SUCCESS despite the communication
+ *        hold or corrupted real state. 
+ *        In this case, it is advised to use error interrupts to monitor the error
+ *        events and handle them in the interrupt IRQ handler.
+ *        
+ *        @note 
+ *        For error management, it is advised to use the following functions:
+ *          - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
+ *          - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
+ *            Where x is the peripheral instance (I2C1, I2C2 ...)
+ *          - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler()
+ *            in order to determine which error occurred.
+ *          - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
+ *            and/or I2C_GenerateStop() in order to clear the error flag and source,
+ *            and return to correct communication status.
+ *            
+ *
+ *  2) Advanced state monitoring:
+ *     Using the function I2C_GetLastEvent() which returns the image of both status 
+ *     registers in a single word (uint32_t) (Status Register 2 value is shifted left 
+ *     by 16 bits and concatenated to Status Register 1).
+ *     - When to use:
+ *       - This function is suitable for the same applications above but it allows to
+ *         overcome the limitations of I2C_GetFlagStatus() function (see below).
+ *         The returned value could be compared to events already defined in the 
+ *         library (stm32f10x_i2c.h) or to custom values defined by user.
+ *       - This function is suitable when multiple flags are monitored at the same time.
+ *       - At the opposite of I2C_CheckEvent() function, this function allows user to
+ *         choose when an event is accepted (when all events flags are set and no 
+ *         other flags are set or just when the needed flags are set like 
+ *         I2C_CheckEvent() function).
+ *     - Limitations:
+ *       - User may need to define his own events.
+ *       - Same remark concerning the error management is applicable for this 
+ *         function if user decides to check only regular communication flags (and 
+ *         ignores error flags).
+ *     
+ *
+ *  3) Flag-based state monitoring:
+ *     Using the function I2C_GetFlagStatus() which simply returns the status of 
+ *     one single flag (ie. I2C_FLAG_RXNE ...). 
+ *     - When to use:
+ *        - This function could be used for specific applications or in debug phase.
+ *        - It is suitable when only one flag checking is needed (most I2C events 
+ *          are monitored through multiple flags).
+ *     - Limitations: 
+ *        - When calling this function, the Status register is accessed. Some flags are
+ *          cleared when the status register is accessed. So checking the status
+ *          of one Flag, may clear other ones.
+ *        - Function may need to be called twice or more in order to monitor one 
+ *          single event.
+ *            
+ */
+
+/**
+ * 
+ *  1) Basic state monitoring
+ *******************************************************************************
+ */
+ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT);
+/**
+ * 
+ *  2) Advanced state monitoring
+ *******************************************************************************
+ */
+uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx);
+/**
+ * 
+ *  3) Flag-based state monitoring
+ *******************************************************************************
+ */
+FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
+/**
+ *
+ *******************************************************************************
+ */
+
+void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG);
+ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
+void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_I2C_H */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_iwdg.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_iwdg.h
new file mode 100644
index 0000000000000000000000000000000000000000..7f5ab7642c32138aaa157437901a5a889b703ca0
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_iwdg.h
@@ -0,0 +1,140 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_iwdg.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the IWDG 
+  *          firmware library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IWDG_H
+#define __STM32F10x_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup IWDG
+  * @{
+  */
+
+/** @defgroup IWDG_Exported_Types
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Constants
+  * @{
+  */
+
+/** @defgroup IWDG_WriteAccess
+  * @{
+  */
+
+#define IWDG_WriteAccess_Enable     ((uint16_t)0x5555)
+#define IWDG_WriteAccess_Disable    ((uint16_t)0x0000)
+#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \
+                                      ((ACCESS) == IWDG_WriteAccess_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_prescaler 
+  * @{
+  */
+
+#define IWDG_Prescaler_4            ((uint8_t)0x00)
+#define IWDG_Prescaler_8            ((uint8_t)0x01)
+#define IWDG_Prescaler_16           ((uint8_t)0x02)
+#define IWDG_Prescaler_32           ((uint8_t)0x03)
+#define IWDG_Prescaler_64           ((uint8_t)0x04)
+#define IWDG_Prescaler_128          ((uint8_t)0x05)
+#define IWDG_Prescaler_256          ((uint8_t)0x06)
+#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4)  || \
+                                      ((PRESCALER) == IWDG_Prescaler_8)  || \
+                                      ((PRESCALER) == IWDG_Prescaler_16) || \
+                                      ((PRESCALER) == IWDG_Prescaler_32) || \
+                                      ((PRESCALER) == IWDG_Prescaler_64) || \
+                                      ((PRESCALER) == IWDG_Prescaler_128)|| \
+                                      ((PRESCALER) == IWDG_Prescaler_256))
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Flag 
+  * @{
+  */
+
+#define IWDG_FLAG_PVU               ((uint16_t)0x0001)
+#define IWDG_FLAG_RVU               ((uint16_t)0x0002)
+#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU))
+#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Exported_Functions
+  * @{
+  */
+
+void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess);
+void IWDG_SetPrescaler(uint8_t IWDG_Prescaler);
+void IWDG_SetReload(uint16_t Reload);
+void IWDG_ReloadCounter(void);
+void IWDG_Enable(void);
+FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_IWDG_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_pwr.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_pwr.h
new file mode 100644
index 0000000000000000000000000000000000000000..76e6ce91f994af3c529ef4fdf94e59f7be063935
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_pwr.h
@@ -0,0 +1,156 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_pwr.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the PWR firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_PWR_H
+#define __STM32F10x_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup PWR
+  * @{
+  */ 
+
+/** @defgroup PWR_Exported_Types
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup PWR_Exported_Constants
+  * @{
+  */ 
+
+/** @defgroup PVD_detection_level 
+  * @{
+  */ 
+
+#define PWR_PVDLevel_2V2          ((uint32_t)0x00000000)
+#define PWR_PVDLevel_2V3          ((uint32_t)0x00000020)
+#define PWR_PVDLevel_2V4          ((uint32_t)0x00000040)
+#define PWR_PVDLevel_2V5          ((uint32_t)0x00000060)
+#define PWR_PVDLevel_2V6          ((uint32_t)0x00000080)
+#define PWR_PVDLevel_2V7          ((uint32_t)0x000000A0)
+#define PWR_PVDLevel_2V8          ((uint32_t)0x000000C0)
+#define PWR_PVDLevel_2V9          ((uint32_t)0x000000E0)
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \
+                                 ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \
+                                 ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \
+                                 ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9))
+/**
+  * @}
+  */
+
+/** @defgroup Regulator_state_is_STOP_mode 
+  * @{
+  */
+
+#define PWR_Regulator_ON          ((uint32_t)0x00000000)
+#define PWR_Regulator_LowPower    ((uint32_t)0x00000001)
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \
+                                     ((REGULATOR) == PWR_Regulator_LowPower))
+/**
+  * @}
+  */
+
+/** @defgroup STOP_mode_entry 
+  * @{
+  */
+
+#define PWR_STOPEntry_WFI         ((uint8_t)0x01)
+#define PWR_STOPEntry_WFE         ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE))
+ 
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Flag 
+  * @{
+  */
+
+#define PWR_FLAG_WU               ((uint32_t)0x00000001)
+#define PWR_FLAG_SB               ((uint32_t)0x00000002)
+#define PWR_FLAG_PVDO             ((uint32_t)0x00000004)
+#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
+                               ((FLAG) == PWR_FLAG_PVDO))
+
+#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Exported_Functions
+  * @{
+  */
+
+void PWR_DeInit(void);
+void PWR_BackupAccessCmd(FunctionalState NewState);
+void PWR_PVDCmd(FunctionalState NewState);
+void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel);
+void PWR_WakeUpPinCmd(FunctionalState NewState);
+void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry);
+void PWR_EnterSTANDBYMode(void);
+FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG);
+void PWR_ClearFlag(uint32_t PWR_FLAG);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_PWR_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_rcc.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_rcc.h
new file mode 100644
index 0000000000000000000000000000000000000000..b3b7d821d770f32d11ae6c8424eb3feb913a1986
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_rcc.h
@@ -0,0 +1,727 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_rcc.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the RCC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_RCC_H
+#define __STM32F10x_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup RCC
+  * @{
+  */
+
+/** @defgroup RCC_Exported_Types
+  * @{
+  */
+
+typedef struct
+{
+  uint32_t SYSCLK_Frequency;  /*!< returns SYSCLK clock frequency expressed in Hz */
+  uint32_t HCLK_Frequency;    /*!< returns HCLK clock frequency expressed in Hz */
+  uint32_t PCLK1_Frequency;   /*!< returns PCLK1 clock frequency expressed in Hz */
+  uint32_t PCLK2_Frequency;   /*!< returns PCLK2 clock frequency expressed in Hz */
+  uint32_t ADCCLK_Frequency;  /*!< returns ADCCLK clock frequency expressed in Hz */
+}RCC_ClocksTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Exported_Constants
+  * @{
+  */
+
+/** @defgroup HSE_configuration 
+  * @{
+  */
+
+#define RCC_HSE_OFF                      ((uint32_t)0x00000000)
+#define RCC_HSE_ON                       ((uint32_t)0x00010000)
+#define RCC_HSE_Bypass                   ((uint32_t)0x00040000)
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+                         ((HSE) == RCC_HSE_Bypass))
+
+/**
+  * @}
+  */ 
+
+/** @defgroup PLL_entry_clock_source 
+  * @{
+  */
+
+#define RCC_PLLSource_HSI_Div2           ((uint32_t)0x00000000)
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_CL)
+ #define RCC_PLLSource_HSE_Div1           ((uint32_t)0x00010000)
+ #define RCC_PLLSource_HSE_Div2           ((uint32_t)0x00030000)
+ #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \
+                                   ((SOURCE) == RCC_PLLSource_HSE_Div1) || \
+                                   ((SOURCE) == RCC_PLLSource_HSE_Div2))
+#else
+ #define RCC_PLLSource_PREDIV1            ((uint32_t)0x00010000)
+ #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \
+                                   ((SOURCE) == RCC_PLLSource_PREDIV1))
+#endif /* STM32F10X_CL */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup PLL_multiplication_factor 
+  * @{
+  */
+#ifndef STM32F10X_CL
+ #define RCC_PLLMul_2                    ((uint32_t)0x00000000)
+ #define RCC_PLLMul_3                    ((uint32_t)0x00040000)
+ #define RCC_PLLMul_4                    ((uint32_t)0x00080000)
+ #define RCC_PLLMul_5                    ((uint32_t)0x000C0000)
+ #define RCC_PLLMul_6                    ((uint32_t)0x00100000)
+ #define RCC_PLLMul_7                    ((uint32_t)0x00140000)
+ #define RCC_PLLMul_8                    ((uint32_t)0x00180000)
+ #define RCC_PLLMul_9                    ((uint32_t)0x001C0000)
+ #define RCC_PLLMul_10                   ((uint32_t)0x00200000)
+ #define RCC_PLLMul_11                   ((uint32_t)0x00240000)
+ #define RCC_PLLMul_12                   ((uint32_t)0x00280000)
+ #define RCC_PLLMul_13                   ((uint32_t)0x002C0000)
+ #define RCC_PLLMul_14                   ((uint32_t)0x00300000)
+ #define RCC_PLLMul_15                   ((uint32_t)0x00340000)
+ #define RCC_PLLMul_16                   ((uint32_t)0x00380000)
+ #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3)   || \
+                              ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5)   || \
+                              ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7)   || \
+                              ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9)   || \
+                              ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \
+                              ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \
+                              ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \
+                              ((MUL) == RCC_PLLMul_16))
+
+#else
+ #define RCC_PLLMul_4                    ((uint32_t)0x00080000)
+ #define RCC_PLLMul_5                    ((uint32_t)0x000C0000)
+ #define RCC_PLLMul_6                    ((uint32_t)0x00100000)
+ #define RCC_PLLMul_7                    ((uint32_t)0x00140000)
+ #define RCC_PLLMul_8                    ((uint32_t)0x00180000)
+ #define RCC_PLLMul_9                    ((uint32_t)0x001C0000)
+ #define RCC_PLLMul_6_5                  ((uint32_t)0x00340000)
+
+ #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \
+                              ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \
+                              ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \
+                              ((MUL) == RCC_PLLMul_6_5))
+#endif /* STM32F10X_CL */                              
+/**
+  * @}
+  */
+
+/** @defgroup PREDIV1_division_factor
+  * @{
+  */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ #define  RCC_PREDIV1_Div1               ((uint32_t)0x00000000)
+ #define  RCC_PREDIV1_Div2               ((uint32_t)0x00000001)
+ #define  RCC_PREDIV1_Div3               ((uint32_t)0x00000002)
+ #define  RCC_PREDIV1_Div4               ((uint32_t)0x00000003)
+ #define  RCC_PREDIV1_Div5               ((uint32_t)0x00000004)
+ #define  RCC_PREDIV1_Div6               ((uint32_t)0x00000005)
+ #define  RCC_PREDIV1_Div7               ((uint32_t)0x00000006)
+ #define  RCC_PREDIV1_Div8               ((uint32_t)0x00000007)
+ #define  RCC_PREDIV1_Div9               ((uint32_t)0x00000008)
+ #define  RCC_PREDIV1_Div10              ((uint32_t)0x00000009)
+ #define  RCC_PREDIV1_Div11              ((uint32_t)0x0000000A)
+ #define  RCC_PREDIV1_Div12              ((uint32_t)0x0000000B)
+ #define  RCC_PREDIV1_Div13              ((uint32_t)0x0000000C)
+ #define  RCC_PREDIV1_Div14              ((uint32_t)0x0000000D)
+ #define  RCC_PREDIV1_Div15              ((uint32_t)0x0000000E)
+ #define  RCC_PREDIV1_Div16              ((uint32_t)0x0000000F)
+
+ #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \
+                                  ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16))
+#endif
+/**
+  * @}
+  */
+
+
+/** @defgroup PREDIV1_clock_source
+  * @{
+  */
+#ifdef STM32F10X_CL
+/* PREDIV1 clock source (for STM32 connectivity line devices) */
+ #define  RCC_PREDIV1_Source_HSE         ((uint32_t)0x00000000) 
+ #define  RCC_PREDIV1_Source_PLL2        ((uint32_t)0x00010000) 
+
+ #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \
+                                        ((SOURCE) == RCC_PREDIV1_Source_PLL2)) 
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/* PREDIV1 clock source (for STM32 Value line devices) */
+ #define  RCC_PREDIV1_Source_HSE         ((uint32_t)0x00000000) 
+
+ #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE)) 
+#endif
+/**
+  * @}
+  */
+
+#ifdef STM32F10X_CL
+/** @defgroup PREDIV2_division_factor
+  * @{
+  */
+  
+ #define  RCC_PREDIV2_Div1               ((uint32_t)0x00000000)
+ #define  RCC_PREDIV2_Div2               ((uint32_t)0x00000010)
+ #define  RCC_PREDIV2_Div3               ((uint32_t)0x00000020)
+ #define  RCC_PREDIV2_Div4               ((uint32_t)0x00000030)
+ #define  RCC_PREDIV2_Div5               ((uint32_t)0x00000040)
+ #define  RCC_PREDIV2_Div6               ((uint32_t)0x00000050)
+ #define  RCC_PREDIV2_Div7               ((uint32_t)0x00000060)
+ #define  RCC_PREDIV2_Div8               ((uint32_t)0x00000070)
+ #define  RCC_PREDIV2_Div9               ((uint32_t)0x00000080)
+ #define  RCC_PREDIV2_Div10              ((uint32_t)0x00000090)
+ #define  RCC_PREDIV2_Div11              ((uint32_t)0x000000A0)
+ #define  RCC_PREDIV2_Div12              ((uint32_t)0x000000B0)
+ #define  RCC_PREDIV2_Div13              ((uint32_t)0x000000C0)
+ #define  RCC_PREDIV2_Div14              ((uint32_t)0x000000D0)
+ #define  RCC_PREDIV2_Div15              ((uint32_t)0x000000E0)
+ #define  RCC_PREDIV2_Div16              ((uint32_t)0x000000F0)
+
+ #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \
+                                  ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16))
+/**
+  * @}
+  */
+
+
+/** @defgroup PLL2_multiplication_factor
+  * @{
+  */
+  
+ #define  RCC_PLL2Mul_8                  ((uint32_t)0x00000600)
+ #define  RCC_PLL2Mul_9                  ((uint32_t)0x00000700)
+ #define  RCC_PLL2Mul_10                 ((uint32_t)0x00000800)
+ #define  RCC_PLL2Mul_11                 ((uint32_t)0x00000900)
+ #define  RCC_PLL2Mul_12                 ((uint32_t)0x00000A00)
+ #define  RCC_PLL2Mul_13                 ((uint32_t)0x00000B00)
+ #define  RCC_PLL2Mul_14                 ((uint32_t)0x00000C00)
+ #define  RCC_PLL2Mul_16                 ((uint32_t)0x00000E00)
+ #define  RCC_PLL2Mul_20                 ((uint32_t)0x00000F00)
+
+ #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9)  || \
+                               ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \
+                               ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \
+                               ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \
+                               ((MUL) == RCC_PLL2Mul_20))
+/**
+  * @}
+  */
+
+
+/** @defgroup PLL3_multiplication_factor
+  * @{
+  */
+
+ #define  RCC_PLL3Mul_8                  ((uint32_t)0x00006000)
+ #define  RCC_PLL3Mul_9                  ((uint32_t)0x00007000)
+ #define  RCC_PLL3Mul_10                 ((uint32_t)0x00008000)
+ #define  RCC_PLL3Mul_11                 ((uint32_t)0x00009000)
+ #define  RCC_PLL3Mul_12                 ((uint32_t)0x0000A000)
+ #define  RCC_PLL3Mul_13                 ((uint32_t)0x0000B000)
+ #define  RCC_PLL3Mul_14                 ((uint32_t)0x0000C000)
+ #define  RCC_PLL3Mul_16                 ((uint32_t)0x0000E000)
+ #define  RCC_PLL3Mul_20                 ((uint32_t)0x0000F000)
+
+ #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9)  || \
+                               ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \
+                               ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \
+                               ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \
+                               ((MUL) == RCC_PLL3Mul_20))
+/**
+  * @}
+  */
+
+#endif /* STM32F10X_CL */
+
+
+/** @defgroup System_clock_source 
+  * @{
+  */
+
+#define RCC_SYSCLKSource_HSI             ((uint32_t)0x00000000)
+#define RCC_SYSCLKSource_HSE             ((uint32_t)0x00000001)
+#define RCC_SYSCLKSource_PLLCLK          ((uint32_t)0x00000002)
+#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \
+                                      ((SOURCE) == RCC_SYSCLKSource_HSE) || \
+                                      ((SOURCE) == RCC_SYSCLKSource_PLLCLK))
+/**
+  * @}
+  */
+
+/** @defgroup AHB_clock_source 
+  * @{
+  */
+
+#define RCC_SYSCLK_Div1                  ((uint32_t)0x00000000)
+#define RCC_SYSCLK_Div2                  ((uint32_t)0x00000080)
+#define RCC_SYSCLK_Div4                  ((uint32_t)0x00000090)
+#define RCC_SYSCLK_Div8                  ((uint32_t)0x000000A0)
+#define RCC_SYSCLK_Div16                 ((uint32_t)0x000000B0)
+#define RCC_SYSCLK_Div64                 ((uint32_t)0x000000C0)
+#define RCC_SYSCLK_Div128                ((uint32_t)0x000000D0)
+#define RCC_SYSCLK_Div256                ((uint32_t)0x000000E0)
+#define RCC_SYSCLK_Div512                ((uint32_t)0x000000F0)
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \
+                           ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \
+                           ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \
+                           ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \
+                           ((HCLK) == RCC_SYSCLK_Div512))
+/**
+  * @}
+  */ 
+
+/** @defgroup APB1_APB2_clock_source 
+  * @{
+  */
+
+#define RCC_HCLK_Div1                    ((uint32_t)0x00000000)
+#define RCC_HCLK_Div2                    ((uint32_t)0x00000400)
+#define RCC_HCLK_Div4                    ((uint32_t)0x00000500)
+#define RCC_HCLK_Div8                    ((uint32_t)0x00000600)
+#define RCC_HCLK_Div16                   ((uint32_t)0x00000700)
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \
+                           ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \
+                           ((PCLK) == RCC_HCLK_Div16))
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Interrupt_source 
+  * @{
+  */
+
+#define RCC_IT_LSIRDY                    ((uint8_t)0x01)
+#define RCC_IT_LSERDY                    ((uint8_t)0x02)
+#define RCC_IT_HSIRDY                    ((uint8_t)0x04)
+#define RCC_IT_HSERDY                    ((uint8_t)0x08)
+#define RCC_IT_PLLRDY                    ((uint8_t)0x10)
+#define RCC_IT_CSS                       ((uint8_t)0x80)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00))
+ #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
+                            ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
+                            ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS))
+ #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00))
+#else
+ #define RCC_IT_PLL2RDY                  ((uint8_t)0x20)
+ #define RCC_IT_PLL3RDY                  ((uint8_t)0x40)
+ #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00))
+ #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \
+                            ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \
+                            ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \
+                            ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY))
+ #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00)
+#endif /* STM32F10X_CL */ 
+
+
+/**
+  * @}
+  */
+
+#ifndef STM32F10X_CL
+/** @defgroup USB_Device_clock_source 
+  * @{
+  */
+
+ #define RCC_USBCLKSource_PLLCLK_1Div5   ((uint8_t)0x00)
+ #define RCC_USBCLKSource_PLLCLK_Div1    ((uint8_t)0x01)
+
+ #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \
+                                      ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1))
+/**
+  * @}
+  */
+#else
+/** @defgroup USB_OTG_FS_clock_source 
+  * @{
+  */
+ #define RCC_OTGFSCLKSource_PLLVCO_Div3    ((uint8_t)0x00)
+ #define RCC_OTGFSCLKSource_PLLVCO_Div2    ((uint8_t)0x01)
+
+ #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \
+                                         ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2))
+/**
+  * @}
+  */
+#endif /* STM32F10X_CL */ 
+
+
+#ifdef STM32F10X_CL
+/** @defgroup I2S2_clock_source 
+  * @{
+  */
+ #define RCC_I2S2CLKSource_SYSCLK        ((uint8_t)0x00)
+ #define RCC_I2S2CLKSource_PLL3_VCO      ((uint8_t)0x01)
+
+ #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \
+                                        ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO))
+/**
+  * @}
+  */
+
+/** @defgroup I2S3_clock_source 
+  * @{
+  */
+ #define RCC_I2S3CLKSource_SYSCLK        ((uint8_t)0x00)
+ #define RCC_I2S3CLKSource_PLL3_VCO      ((uint8_t)0x01)
+
+ #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \
+                                        ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO))    
+/**
+  * @}
+  */
+#endif /* STM32F10X_CL */  
+  
+
+/** @defgroup ADC_clock_source 
+  * @{
+  */
+
+#define RCC_PCLK2_Div2                   ((uint32_t)0x00000000)
+#define RCC_PCLK2_Div4                   ((uint32_t)0x00004000)
+#define RCC_PCLK2_Div6                   ((uint32_t)0x00008000)
+#define RCC_PCLK2_Div8                   ((uint32_t)0x0000C000)
+#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \
+                               ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8))
+/**
+  * @}
+  */
+
+/** @defgroup LSE_configuration 
+  * @{
+  */
+
+#define RCC_LSE_OFF                      ((uint8_t)0x00)
+#define RCC_LSE_ON                       ((uint8_t)0x01)
+#define RCC_LSE_Bypass                   ((uint8_t)0x04)
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+                         ((LSE) == RCC_LSE_Bypass))
+/**
+  * @}
+  */
+
+/** @defgroup RTC_clock_source 
+  * @{
+  */
+
+#define RCC_RTCCLKSource_LSE             ((uint32_t)0x00000100)
+#define RCC_RTCCLKSource_LSI             ((uint32_t)0x00000200)
+#define RCC_RTCCLKSource_HSE_Div128      ((uint32_t)0x00000300)
+#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \
+                                      ((SOURCE) == RCC_RTCCLKSource_LSI) || \
+                                      ((SOURCE) == RCC_RTCCLKSource_HSE_Div128))
+/**
+  * @}
+  */
+
+/** @defgroup AHB_peripheral 
+  * @{
+  */
+
+#define RCC_AHBPeriph_DMA1               ((uint32_t)0x00000001)
+#define RCC_AHBPeriph_DMA2               ((uint32_t)0x00000002)
+#define RCC_AHBPeriph_SRAM               ((uint32_t)0x00000004)
+#define RCC_AHBPeriph_FLITF              ((uint32_t)0x00000010)
+#define RCC_AHBPeriph_CRC                ((uint32_t)0x00000040)
+
+#ifndef STM32F10X_CL
+ #define RCC_AHBPeriph_FSMC              ((uint32_t)0x00000100)
+ #define RCC_AHBPeriph_SDIO              ((uint32_t)0x00000400)
+ #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00))
+#else
+ #define RCC_AHBPeriph_OTG_FS            ((uint32_t)0x00001000)
+ #define RCC_AHBPeriph_ETH_MAC           ((uint32_t)0x00004000)
+ #define RCC_AHBPeriph_ETH_MAC_Tx        ((uint32_t)0x00008000)
+ #define RCC_AHBPeriph_ETH_MAC_Rx        ((uint32_t)0x00010000)
+
+ #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00))
+ #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00))
+#endif /* STM32F10X_CL */
+/**
+  * @}
+  */
+
+/** @defgroup APB2_peripheral 
+  * @{
+  */
+
+#define RCC_APB2Periph_AFIO              ((uint32_t)0x00000001)
+#define RCC_APB2Periph_GPIOA             ((uint32_t)0x00000004)
+#define RCC_APB2Periph_GPIOB             ((uint32_t)0x00000008)
+#define RCC_APB2Periph_GPIOC             ((uint32_t)0x00000010)
+#define RCC_APB2Periph_GPIOD             ((uint32_t)0x00000020)
+#define RCC_APB2Periph_GPIOE             ((uint32_t)0x00000040)
+#define RCC_APB2Periph_GPIOF             ((uint32_t)0x00000080)
+#define RCC_APB2Periph_GPIOG             ((uint32_t)0x00000100)
+#define RCC_APB2Periph_ADC1              ((uint32_t)0x00000200)
+#define RCC_APB2Periph_ADC2              ((uint32_t)0x00000400)
+#define RCC_APB2Periph_TIM1              ((uint32_t)0x00000800)
+#define RCC_APB2Periph_SPI1              ((uint32_t)0x00001000)
+#define RCC_APB2Periph_TIM8              ((uint32_t)0x00002000)
+#define RCC_APB2Periph_USART1            ((uint32_t)0x00004000)
+#define RCC_APB2Periph_ADC3              ((uint32_t)0x00008000)
+#define RCC_APB2Periph_TIM15             ((uint32_t)0x00010000)
+#define RCC_APB2Periph_TIM16             ((uint32_t)0x00020000)
+#define RCC_APB2Periph_TIM17             ((uint32_t)0x00040000)
+#define RCC_APB2Periph_TIM9              ((uint32_t)0x00080000)
+#define RCC_APB2Periph_TIM10             ((uint32_t)0x00100000)
+#define RCC_APB2Periph_TIM11             ((uint32_t)0x00200000)
+
+#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00))
+/**
+  * @}
+  */ 
+
+/** @defgroup APB1_peripheral 
+  * @{
+  */
+
+#define RCC_APB1Periph_TIM2              ((uint32_t)0x00000001)
+#define RCC_APB1Periph_TIM3              ((uint32_t)0x00000002)
+#define RCC_APB1Periph_TIM4              ((uint32_t)0x00000004)
+#define RCC_APB1Periph_TIM5              ((uint32_t)0x00000008)
+#define RCC_APB1Periph_TIM6              ((uint32_t)0x00000010)
+#define RCC_APB1Periph_TIM7              ((uint32_t)0x00000020)
+#define RCC_APB1Periph_TIM12             ((uint32_t)0x00000040)
+#define RCC_APB1Periph_TIM13             ((uint32_t)0x00000080)
+#define RCC_APB1Periph_TIM14             ((uint32_t)0x00000100)
+#define RCC_APB1Periph_WWDG              ((uint32_t)0x00000800)
+#define RCC_APB1Periph_SPI2              ((uint32_t)0x00004000)
+#define RCC_APB1Periph_SPI3              ((uint32_t)0x00008000)
+#define RCC_APB1Periph_USART2            ((uint32_t)0x00020000)
+#define RCC_APB1Periph_USART3            ((uint32_t)0x00040000)
+#define RCC_APB1Periph_UART4             ((uint32_t)0x00080000)
+#define RCC_APB1Periph_UART5             ((uint32_t)0x00100000)
+#define RCC_APB1Periph_I2C1              ((uint32_t)0x00200000)
+#define RCC_APB1Periph_I2C2              ((uint32_t)0x00400000)
+#define RCC_APB1Periph_USB               ((uint32_t)0x00800000)
+#define RCC_APB1Periph_CAN1              ((uint32_t)0x02000000)
+#define RCC_APB1Periph_CAN2              ((uint32_t)0x04000000)
+#define RCC_APB1Periph_BKP               ((uint32_t)0x08000000)
+#define RCC_APB1Periph_PWR               ((uint32_t)0x10000000)
+#define RCC_APB1Periph_DAC               ((uint32_t)0x20000000)
+#define RCC_APB1Periph_CEC               ((uint32_t)0x40000000)
+ 
+#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00))
+
+/**
+  * @}
+  */
+
+/** @defgroup Clock_source_to_output_on_MCO_pin 
+  * @{
+  */
+
+#define RCC_MCO_NoClock                  ((uint8_t)0x00)
+#define RCC_MCO_SYSCLK                   ((uint8_t)0x04)
+#define RCC_MCO_HSI                      ((uint8_t)0x05)
+#define RCC_MCO_HSE                      ((uint8_t)0x06)
+#define RCC_MCO_PLLCLK_Div2              ((uint8_t)0x07)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \
+                          ((MCO) == RCC_MCO_SYSCLK)  || ((MCO) == RCC_MCO_HSE) || \
+                          ((MCO) == RCC_MCO_PLLCLK_Div2))
+#else
+ #define RCC_MCO_PLL2CLK                 ((uint8_t)0x08)
+ #define RCC_MCO_PLL3CLK_Div2            ((uint8_t)0x09)
+ #define RCC_MCO_XT1                     ((uint8_t)0x0A)
+ #define RCC_MCO_PLL3CLK                 ((uint8_t)0x0B)
+
+ #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \
+                          ((MCO) == RCC_MCO_SYSCLK)  || ((MCO) == RCC_MCO_HSE) || \
+                          ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \
+                          ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \
+                          ((MCO) == RCC_MCO_PLL3CLK))
+#endif /* STM32F10X_CL */ 
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Flag 
+  * @{
+  */
+
+#define RCC_FLAG_HSIRDY                  ((uint8_t)0x21)
+#define RCC_FLAG_HSERDY                  ((uint8_t)0x31)
+#define RCC_FLAG_PLLRDY                  ((uint8_t)0x39)
+#define RCC_FLAG_LSERDY                  ((uint8_t)0x41)
+#define RCC_FLAG_LSIRDY                  ((uint8_t)0x61)
+#define RCC_FLAG_PINRST                  ((uint8_t)0x7A)
+#define RCC_FLAG_PORRST                  ((uint8_t)0x7B)
+#define RCC_FLAG_SFTRST                  ((uint8_t)0x7C)
+#define RCC_FLAG_IWDGRST                 ((uint8_t)0x7D)
+#define RCC_FLAG_WWDGRST                 ((uint8_t)0x7E)
+#define RCC_FLAG_LPWRRST                 ((uint8_t)0x7F)
+
+#ifndef STM32F10X_CL
+ #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
+                            ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
+                            ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \
+                            ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \
+                            ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \
+                            ((FLAG) == RCC_FLAG_LPWRRST))
+#else
+ #define RCC_FLAG_PLL2RDY                ((uint8_t)0x3B) 
+ #define RCC_FLAG_PLL3RDY                ((uint8_t)0x3D) 
+ #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \
+                            ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \
+                            ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \
+                            ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \
+                            ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \
+                            ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \
+                            ((FLAG) == RCC_FLAG_LPWRRST))
+#endif /* STM32F10X_CL */ 
+
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Exported_Functions
+  * @{
+  */
+
+void RCC_DeInit(void);
+void RCC_HSEConfig(uint32_t RCC_HSE);
+ErrorStatus RCC_WaitForHSEStartUp(void);
+void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue);
+void RCC_HSICmd(FunctionalState NewState);
+void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul);
+void RCC_PLLCmd(FunctionalState NewState);
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+ void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div);
+#endif
+
+#ifdef  STM32F10X_CL
+ void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div);
+ void RCC_PLL2Config(uint32_t RCC_PLL2Mul);
+ void RCC_PLL2Cmd(FunctionalState NewState);
+ void RCC_PLL3Config(uint32_t RCC_PLL3Mul);
+ void RCC_PLL3Cmd(FunctionalState NewState);
+#endif /* STM32F10X_CL */ 
+
+void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource);
+uint8_t RCC_GetSYSCLKSource(void);
+void RCC_HCLKConfig(uint32_t RCC_SYSCLK);
+void RCC_PCLK1Config(uint32_t RCC_HCLK);
+void RCC_PCLK2Config(uint32_t RCC_HCLK);
+void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState);
+
+#ifndef STM32F10X_CL
+ void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource);
+#else
+ void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource);
+#endif /* STM32F10X_CL */ 
+
+void RCC_ADCCLKConfig(uint32_t RCC_PCLK2);
+
+#ifdef STM32F10X_CL
+ void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource);                                  
+ void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource);
+#endif /* STM32F10X_CL */ 
+
+void RCC_LSEConfig(uint8_t RCC_LSE);
+void RCC_LSICmd(FunctionalState NewState);
+void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource);
+void RCC_RTCCLKCmd(FunctionalState NewState);
+void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks);
+void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
+void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+
+#ifdef STM32F10X_CL
+void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState);
+#endif /* STM32F10X_CL */ 
+
+void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState);
+void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState);
+void RCC_BackupResetCmd(FunctionalState NewState);
+void RCC_ClockSecuritySystemCmd(FunctionalState NewState);
+void RCC_MCOConfig(uint8_t RCC_MCO);
+FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG);
+void RCC_ClearFlag(void);
+ITStatus RCC_GetITStatus(uint8_t RCC_IT);
+void RCC_ClearITPendingBit(uint8_t RCC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_RCC_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_rtc.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_rtc.h
new file mode 100644
index 0000000000000000000000000000000000000000..214a5893a00815ebb1020d2b42a83b99a0b1a630
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_rtc.h
@@ -0,0 +1,135 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_rtc.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the RTC firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_RTC_H
+#define __STM32F10x_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup RTC
+  * @{
+  */ 
+
+/** @defgroup RTC_Exported_Types
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup RTC_Exported_Constants
+  * @{
+  */
+
+/** @defgroup RTC_interrupts_define 
+  * @{
+  */
+
+#define RTC_IT_OW            ((uint16_t)0x0004)  /*!< Overflow interrupt */
+#define RTC_IT_ALR           ((uint16_t)0x0002)  /*!< Alarm interrupt */
+#define RTC_IT_SEC           ((uint16_t)0x0001)  /*!< Second interrupt */
+#define IS_RTC_IT(IT) ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00))
+#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \
+                           ((IT) == RTC_IT_SEC))
+/**
+  * @}
+  */ 
+
+/** @defgroup RTC_interrupts_flags 
+  * @{
+  */
+
+#define RTC_FLAG_RTOFF       ((uint16_t)0x0020)  /*!< RTC Operation OFF flag */
+#define RTC_FLAG_RSF         ((uint16_t)0x0008)  /*!< Registers Synchronized flag */
+#define RTC_FLAG_OW          ((uint16_t)0x0004)  /*!< Overflow flag */
+#define RTC_FLAG_ALR         ((uint16_t)0x0002)  /*!< Alarm flag */
+#define RTC_FLAG_SEC         ((uint16_t)0x0001)  /*!< Second flag */
+#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00))
+#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \
+                               ((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \
+                               ((FLAG) == RTC_FLAG_SEC))
+#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF)
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Exported_Functions
+  * @{
+  */
+
+void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState);
+void RTC_EnterConfigMode(void);
+void RTC_ExitConfigMode(void);
+uint32_t  RTC_GetCounter(void);
+void RTC_SetCounter(uint32_t CounterValue);
+void RTC_SetPrescaler(uint32_t PrescalerValue);
+void RTC_SetAlarm(uint32_t AlarmValue);
+uint32_t  RTC_GetDivider(void);
+void RTC_WaitForLastTask(void);
+void RTC_WaitForSynchro(void);
+FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG);
+void RTC_ClearFlag(uint16_t RTC_FLAG);
+ITStatus RTC_GetITStatus(uint16_t RTC_IT);
+void RTC_ClearITPendingBit(uint16_t RTC_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_RTC_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_sdio.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_sdio.h
new file mode 100644
index 0000000000000000000000000000000000000000..40cfdedc30bde7e915558b996ad1d9fcc191bfa4
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_sdio.h
@@ -0,0 +1,531 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_sdio.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the SDIO firmware
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_SDIO_H
+#define __STM32F10x_SDIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup SDIO
+  * @{
+  */
+
+/** @defgroup SDIO_Exported_Types
+  * @{
+  */
+
+typedef struct
+{
+  uint32_t SDIO_ClockEdge;            /*!< Specifies the clock transition on which the bit capture is made.
+                                           This parameter can be a value of @ref SDIO_Clock_Edge */
+
+  uint32_t SDIO_ClockBypass;          /*!< Specifies whether the SDIO Clock divider bypass is
+                                           enabled or disabled.
+                                           This parameter can be a value of @ref SDIO_Clock_Bypass */
+
+  uint32_t SDIO_ClockPowerSave;       /*!< Specifies whether SDIO Clock output is enabled or
+                                           disabled when the bus is idle.
+                                           This parameter can be a value of @ref SDIO_Clock_Power_Save */
+
+  uint32_t SDIO_BusWide;              /*!< Specifies the SDIO bus width.
+                                           This parameter can be a value of @ref SDIO_Bus_Wide */
+
+  uint32_t SDIO_HardwareFlowControl;  /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+                                           This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
+
+  uint8_t SDIO_ClockDiv;              /*!< Specifies the clock frequency of the SDIO controller.
+                                           This parameter can be a value between 0x00 and 0xFF. */
+                                           
+} SDIO_InitTypeDef;
+
+typedef struct
+{
+  uint32_t SDIO_Argument;  /*!< Specifies the SDIO command argument which is sent
+                                to a card as part of a command message. If a command
+                                contains an argument, it must be loaded into this register
+                                before writing the command to the command register */
+
+  uint32_t SDIO_CmdIndex;  /*!< Specifies the SDIO command index. It must be lower than 0x40. */
+
+  uint32_t SDIO_Response;  /*!< Specifies the SDIO response type.
+                                This parameter can be a value of @ref SDIO_Response_Type */
+
+  uint32_t SDIO_Wait;      /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled.
+                                This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
+
+  uint32_t SDIO_CPSM;      /*!< Specifies whether SDIO Command path state machine (CPSM)
+                                is enabled or disabled.
+                                This parameter can be a value of @ref SDIO_CPSM_State */
+} SDIO_CmdInitTypeDef;
+
+typedef struct
+{
+  uint32_t SDIO_DataTimeOut;    /*!< Specifies the data timeout period in card bus clock periods. */
+
+  uint32_t SDIO_DataLength;     /*!< Specifies the number of data bytes to be transferred. */
+ 
+  uint32_t SDIO_DataBlockSize;  /*!< Specifies the data block size for block transfer.
+                                     This parameter can be a value of @ref SDIO_Data_Block_Size */
+ 
+  uint32_t SDIO_TransferDir;    /*!< Specifies the data transfer direction, whether the transfer
+                                     is a read or write.
+                                     This parameter can be a value of @ref SDIO_Transfer_Direction */
+ 
+  uint32_t SDIO_TransferMode;   /*!< Specifies whether data transfer is in stream or block mode.
+                                     This parameter can be a value of @ref SDIO_Transfer_Type */
+ 
+  uint32_t SDIO_DPSM;           /*!< Specifies whether SDIO Data path state machine (DPSM)
+                                     is enabled or disabled.
+                                     This parameter can be a value of @ref SDIO_DPSM_State */
+} SDIO_DataInitTypeDef;
+
+/**
+  * @}
+  */ 
+
+/** @defgroup SDIO_Exported_Constants
+  * @{
+  */
+
+/** @defgroup SDIO_Clock_Edge 
+  * @{
+  */
+
+#define SDIO_ClockEdge_Rising               ((uint32_t)0x00000000)
+#define SDIO_ClockEdge_Falling              ((uint32_t)0x00002000)
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \
+                                  ((EDGE) == SDIO_ClockEdge_Falling))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Clock_Bypass 
+  * @{
+  */
+
+#define SDIO_ClockBypass_Disable             ((uint32_t)0x00000000)
+#define SDIO_ClockBypass_Enable              ((uint32_t)0x00000400)    
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \
+                                     ((BYPASS) == SDIO_ClockBypass_Enable))
+/**
+  * @}
+  */ 
+
+/** @defgroup SDIO_Clock_Power_Save 
+  * @{
+  */
+
+#define SDIO_ClockPowerSave_Disable         ((uint32_t)0x00000000)
+#define SDIO_ClockPowerSave_Enable          ((uint32_t)0x00000200) 
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \
+                                        ((SAVE) == SDIO_ClockPowerSave_Enable))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Bus_Wide 
+  * @{
+  */
+
+#define SDIO_BusWide_1b                     ((uint32_t)0x00000000)
+#define SDIO_BusWide_4b                     ((uint32_t)0x00000800)
+#define SDIO_BusWide_8b                     ((uint32_t)0x00001000)
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \
+                                ((WIDE) == SDIO_BusWide_8b))
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Hardware_Flow_Control 
+  * @{
+  */
+
+#define SDIO_HardwareFlowControl_Disable    ((uint32_t)0x00000000)
+#define SDIO_HardwareFlowControl_Enable     ((uint32_t)0x00004000)
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \
+                                                ((CONTROL) == SDIO_HardwareFlowControl_Enable))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Power_State 
+  * @{
+  */
+
+#define SDIO_PowerState_OFF                 ((uint32_t)0x00000000)
+#define SDIO_PowerState_ON                  ((uint32_t)0x00000003)
+#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup SDIO_Interrupt_sources 
+  * @{
+  */
+
+#define SDIO_IT_CCRCFAIL                    ((uint32_t)0x00000001)
+#define SDIO_IT_DCRCFAIL                    ((uint32_t)0x00000002)
+#define SDIO_IT_CTIMEOUT                    ((uint32_t)0x00000004)
+#define SDIO_IT_DTIMEOUT                    ((uint32_t)0x00000008)
+#define SDIO_IT_TXUNDERR                    ((uint32_t)0x00000010)
+#define SDIO_IT_RXOVERR                     ((uint32_t)0x00000020)
+#define SDIO_IT_CMDREND                     ((uint32_t)0x00000040)
+#define SDIO_IT_CMDSENT                     ((uint32_t)0x00000080)
+#define SDIO_IT_DATAEND                     ((uint32_t)0x00000100)
+#define SDIO_IT_STBITERR                    ((uint32_t)0x00000200)
+#define SDIO_IT_DBCKEND                     ((uint32_t)0x00000400)
+#define SDIO_IT_CMDACT                      ((uint32_t)0x00000800)
+#define SDIO_IT_TXACT                       ((uint32_t)0x00001000)
+#define SDIO_IT_RXACT                       ((uint32_t)0x00002000)
+#define SDIO_IT_TXFIFOHE                    ((uint32_t)0x00004000)
+#define SDIO_IT_RXFIFOHF                    ((uint32_t)0x00008000)
+#define SDIO_IT_TXFIFOF                     ((uint32_t)0x00010000)
+#define SDIO_IT_RXFIFOF                     ((uint32_t)0x00020000)
+#define SDIO_IT_TXFIFOE                     ((uint32_t)0x00040000)
+#define SDIO_IT_RXFIFOE                     ((uint32_t)0x00080000)
+#define SDIO_IT_TXDAVL                      ((uint32_t)0x00100000)
+#define SDIO_IT_RXDAVL                      ((uint32_t)0x00200000)
+#define SDIO_IT_SDIOIT                      ((uint32_t)0x00400000)
+#define SDIO_IT_CEATAEND                    ((uint32_t)0x00800000)
+#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))
+/**
+  * @}
+  */ 
+
+/** @defgroup SDIO_Command_Index
+  * @{
+  */
+
+#define IS_SDIO_CMD_INDEX(INDEX)            ((INDEX) < 0x40)
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Response_Type 
+  * @{
+  */
+
+#define SDIO_Response_No                    ((uint32_t)0x00000000)
+#define SDIO_Response_Short                 ((uint32_t)0x00000040)
+#define SDIO_Response_Long                  ((uint32_t)0x000000C0)
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \
+                                    ((RESPONSE) == SDIO_Response_Short) || \
+                                    ((RESPONSE) == SDIO_Response_Long))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Wait_Interrupt_State 
+  * @{
+  */
+
+#define SDIO_Wait_No                        ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */
+#define SDIO_Wait_IT                        ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */
+#define SDIO_Wait_Pend                      ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \
+                            ((WAIT) == SDIO_Wait_Pend))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_CPSM_State 
+  * @{
+  */
+
+#define SDIO_CPSM_Disable                    ((uint32_t)0x00000000)
+#define SDIO_CPSM_Enable                     ((uint32_t)0x00000400)
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable))
+/**
+  * @}
+  */ 
+
+/** @defgroup SDIO_Response_Registers 
+  * @{
+  */
+
+#define SDIO_RESP1                          ((uint32_t)0x00000000)
+#define SDIO_RESP2                          ((uint32_t)0x00000004)
+#define SDIO_RESP3                          ((uint32_t)0x00000008)
+#define SDIO_RESP4                          ((uint32_t)0x0000000C)
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \
+                            ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Data_Length 
+  * @{
+  */
+
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Data_Block_Size 
+  * @{
+  */
+
+#define SDIO_DataBlockSize_1b               ((uint32_t)0x00000000)
+#define SDIO_DataBlockSize_2b               ((uint32_t)0x00000010)
+#define SDIO_DataBlockSize_4b               ((uint32_t)0x00000020)
+#define SDIO_DataBlockSize_8b               ((uint32_t)0x00000030)
+#define SDIO_DataBlockSize_16b              ((uint32_t)0x00000040)
+#define SDIO_DataBlockSize_32b              ((uint32_t)0x00000050)
+#define SDIO_DataBlockSize_64b              ((uint32_t)0x00000060)
+#define SDIO_DataBlockSize_128b             ((uint32_t)0x00000070)
+#define SDIO_DataBlockSize_256b             ((uint32_t)0x00000080)
+#define SDIO_DataBlockSize_512b             ((uint32_t)0x00000090)
+#define SDIO_DataBlockSize_1024b            ((uint32_t)0x000000A0)
+#define SDIO_DataBlockSize_2048b            ((uint32_t)0x000000B0)
+#define SDIO_DataBlockSize_4096b            ((uint32_t)0x000000C0)
+#define SDIO_DataBlockSize_8192b            ((uint32_t)0x000000D0)
+#define SDIO_DataBlockSize_16384b           ((uint32_t)0x000000E0)
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_2b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_4b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_8b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_16b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_32b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_64b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_128b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_256b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_512b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_1024b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_2048b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_4096b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_8192b) || \
+                                  ((SIZE) == SDIO_DataBlockSize_16384b)) 
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Transfer_Direction 
+  * @{
+  */
+
+#define SDIO_TransferDir_ToCard             ((uint32_t)0x00000000)
+#define SDIO_TransferDir_ToSDIO             ((uint32_t)0x00000002)
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \
+                                   ((DIR) == SDIO_TransferDir_ToSDIO))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Transfer_Type 
+  * @{
+  */
+
+#define SDIO_TransferMode_Block             ((uint32_t)0x00000000)
+#define SDIO_TransferMode_Stream            ((uint32_t)0x00000004)
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \
+                                     ((MODE) == SDIO_TransferMode_Block))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_DPSM_State 
+  * @{
+  */
+
+#define SDIO_DPSM_Disable                    ((uint32_t)0x00000000)
+#define SDIO_DPSM_Enable                     ((uint32_t)0x00000001)
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Flags 
+  * @{
+  */
+
+#define SDIO_FLAG_CCRCFAIL                  ((uint32_t)0x00000001)
+#define SDIO_FLAG_DCRCFAIL                  ((uint32_t)0x00000002)
+#define SDIO_FLAG_CTIMEOUT                  ((uint32_t)0x00000004)
+#define SDIO_FLAG_DTIMEOUT                  ((uint32_t)0x00000008)
+#define SDIO_FLAG_TXUNDERR                  ((uint32_t)0x00000010)
+#define SDIO_FLAG_RXOVERR                   ((uint32_t)0x00000020)
+#define SDIO_FLAG_CMDREND                   ((uint32_t)0x00000040)
+#define SDIO_FLAG_CMDSENT                   ((uint32_t)0x00000080)
+#define SDIO_FLAG_DATAEND                   ((uint32_t)0x00000100)
+#define SDIO_FLAG_STBITERR                  ((uint32_t)0x00000200)
+#define SDIO_FLAG_DBCKEND                   ((uint32_t)0x00000400)
+#define SDIO_FLAG_CMDACT                    ((uint32_t)0x00000800)
+#define SDIO_FLAG_TXACT                     ((uint32_t)0x00001000)
+#define SDIO_FLAG_RXACT                     ((uint32_t)0x00002000)
+#define SDIO_FLAG_TXFIFOHE                  ((uint32_t)0x00004000)
+#define SDIO_FLAG_RXFIFOHF                  ((uint32_t)0x00008000)
+#define SDIO_FLAG_TXFIFOF                   ((uint32_t)0x00010000)
+#define SDIO_FLAG_RXFIFOF                   ((uint32_t)0x00020000)
+#define SDIO_FLAG_TXFIFOE                   ((uint32_t)0x00040000)
+#define SDIO_FLAG_RXFIFOE                   ((uint32_t)0x00080000)
+#define SDIO_FLAG_TXDAVL                    ((uint32_t)0x00100000)
+#define SDIO_FLAG_RXDAVL                    ((uint32_t)0x00200000)
+#define SDIO_FLAG_SDIOIT                    ((uint32_t)0x00400000)
+#define SDIO_FLAG_CEATAEND                  ((uint32_t)0x00800000)
+#define IS_SDIO_FLAG(FLAG) (((FLAG)  == SDIO_FLAG_CCRCFAIL) || \
+                            ((FLAG)  == SDIO_FLAG_DCRCFAIL) || \
+                            ((FLAG)  == SDIO_FLAG_CTIMEOUT) || \
+                            ((FLAG)  == SDIO_FLAG_DTIMEOUT) || \
+                            ((FLAG)  == SDIO_FLAG_TXUNDERR) || \
+                            ((FLAG)  == SDIO_FLAG_RXOVERR) || \
+                            ((FLAG)  == SDIO_FLAG_CMDREND) || \
+                            ((FLAG)  == SDIO_FLAG_CMDSENT) || \
+                            ((FLAG)  == SDIO_FLAG_DATAEND) || \
+                            ((FLAG)  == SDIO_FLAG_STBITERR) || \
+                            ((FLAG)  == SDIO_FLAG_DBCKEND) || \
+                            ((FLAG)  == SDIO_FLAG_CMDACT) || \
+                            ((FLAG)  == SDIO_FLAG_TXACT) || \
+                            ((FLAG)  == SDIO_FLAG_RXACT) || \
+                            ((FLAG)  == SDIO_FLAG_TXFIFOHE) || \
+                            ((FLAG)  == SDIO_FLAG_RXFIFOHF) || \
+                            ((FLAG)  == SDIO_FLAG_TXFIFOF) || \
+                            ((FLAG)  == SDIO_FLAG_RXFIFOF) || \
+                            ((FLAG)  == SDIO_FLAG_TXFIFOE) || \
+                            ((FLAG)  == SDIO_FLAG_RXFIFOE) || \
+                            ((FLAG)  == SDIO_FLAG_TXDAVL) || \
+                            ((FLAG)  == SDIO_FLAG_RXDAVL) || \
+                            ((FLAG)  == SDIO_FLAG_SDIOIT) || \
+                            ((FLAG)  == SDIO_FLAG_CEATAEND))
+
+#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))
+
+#define IS_SDIO_GET_IT(IT) (((IT)  == SDIO_IT_CCRCFAIL) || \
+                            ((IT)  == SDIO_IT_DCRCFAIL) || \
+                            ((IT)  == SDIO_IT_CTIMEOUT) || \
+                            ((IT)  == SDIO_IT_DTIMEOUT) || \
+                            ((IT)  == SDIO_IT_TXUNDERR) || \
+                            ((IT)  == SDIO_IT_RXOVERR) || \
+                            ((IT)  == SDIO_IT_CMDREND) || \
+                            ((IT)  == SDIO_IT_CMDSENT) || \
+                            ((IT)  == SDIO_IT_DATAEND) || \
+                            ((IT)  == SDIO_IT_STBITERR) || \
+                            ((IT)  == SDIO_IT_DBCKEND) || \
+                            ((IT)  == SDIO_IT_CMDACT) || \
+                            ((IT)  == SDIO_IT_TXACT) || \
+                            ((IT)  == SDIO_IT_RXACT) || \
+                            ((IT)  == SDIO_IT_TXFIFOHE) || \
+                            ((IT)  == SDIO_IT_RXFIFOHF) || \
+                            ((IT)  == SDIO_IT_TXFIFOF) || \
+                            ((IT)  == SDIO_IT_RXFIFOF) || \
+                            ((IT)  == SDIO_IT_TXFIFOE) || \
+                            ((IT)  == SDIO_IT_RXFIFOE) || \
+                            ((IT)  == SDIO_IT_TXDAVL) || \
+                            ((IT)  == SDIO_IT_RXDAVL) || \
+                            ((IT)  == SDIO_IT_SDIOIT) || \
+                            ((IT)  == SDIO_IT_CEATAEND))
+
+#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Read_Wait_Mode 
+  * @{
+  */
+
+#define SDIO_ReadWaitMode_CLK               ((uint32_t)0x00000001)
+#define SDIO_ReadWaitMode_DATA2             ((uint32_t)0x00000000)
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \
+                                     ((MODE) == SDIO_ReadWaitMode_DATA2))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Exported_Functions
+  * @{
+  */
+
+void SDIO_DeInit(void);
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct);
+void SDIO_ClockCmd(FunctionalState NewState);
+void SDIO_SetPowerState(uint32_t SDIO_PowerState);
+uint32_t SDIO_GetPowerState(void);
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState);
+void SDIO_DMACmd(FunctionalState NewState);
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct);
+uint8_t SDIO_GetCommandResponse(void);
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t SDIO_GetDataCounter(void);
+uint32_t SDIO_ReadData(void);
+void SDIO_WriteData(uint32_t Data);
+uint32_t SDIO_GetFIFOCount(void);
+void SDIO_StartSDIOReadWait(FunctionalState NewState);
+void SDIO_StopSDIOReadWait(FunctionalState NewState);
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+void SDIO_SetSDIOOperation(FunctionalState NewState);
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState);
+void SDIO_CommandCompletionCmd(FunctionalState NewState);
+void SDIO_CEATAITCmd(FunctionalState NewState);
+void SDIO_SendCEATACmd(FunctionalState NewState);
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG);
+void SDIO_ClearFlag(uint32_t SDIO_FLAG);
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT);
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_SDIO_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_spi.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_spi.h
new file mode 100644
index 0000000000000000000000000000000000000000..6056c4c6baaa87e94570b6a3c96b41c3bcb72cb0
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_spi.h
@@ -0,0 +1,487 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_spi.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the SPI firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_SPI_H
+#define __STM32F10x_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup SPI
+  * @{
+  */ 
+
+/** @defgroup SPI_Exported_Types
+  * @{
+  */
+
+/** 
+  * @brief  SPI Init structure definition  
+  */
+
+typedef struct
+{
+  uint16_t SPI_Direction;           /*!< Specifies the SPI unidirectional or bidirectional data mode.
+                                         This parameter can be a value of @ref SPI_data_direction */
+
+  uint16_t SPI_Mode;                /*!< Specifies the SPI operating mode.
+                                         This parameter can be a value of @ref SPI_mode */
+
+  uint16_t SPI_DataSize;            /*!< Specifies the SPI data size.
+                                         This parameter can be a value of @ref SPI_data_size */
+
+  uint16_t SPI_CPOL;                /*!< Specifies the serial clock steady state.
+                                         This parameter can be a value of @ref SPI_Clock_Polarity */
+
+  uint16_t SPI_CPHA;                /*!< Specifies the clock active edge for the bit capture.
+                                         This parameter can be a value of @ref SPI_Clock_Phase */
+
+  uint16_t SPI_NSS;                 /*!< Specifies whether the NSS signal is managed by
+                                         hardware (NSS pin) or by software using the SSI bit.
+                                         This parameter can be a value of @ref SPI_Slave_Select_management */
+ 
+  uint16_t SPI_BaudRatePrescaler;   /*!< Specifies the Baud Rate prescaler value which will be
+                                         used to configure the transmit and receive SCK clock.
+                                         This parameter can be a value of @ref SPI_BaudRate_Prescaler.
+                                         @note The communication clock is derived from the master
+                                               clock. The slave clock does not need to be set. */
+
+  uint16_t SPI_FirstBit;            /*!< Specifies whether data transfers start from MSB or LSB bit.
+                                         This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+  uint16_t SPI_CRCPolynomial;       /*!< Specifies the polynomial used for the CRC calculation. */
+}SPI_InitTypeDef;
+
+/** 
+  * @brief  I2S Init structure definition  
+  */
+
+typedef struct
+{
+
+  uint16_t I2S_Mode;         /*!< Specifies the I2S operating mode.
+                                  This parameter can be a value of @ref I2S_Mode */
+
+  uint16_t I2S_Standard;     /*!< Specifies the standard used for the I2S communication.
+                                  This parameter can be a value of @ref I2S_Standard */
+
+  uint16_t I2S_DataFormat;   /*!< Specifies the data format for the I2S communication.
+                                  This parameter can be a value of @ref I2S_Data_Format */
+
+  uint16_t I2S_MCLKOutput;   /*!< Specifies whether the I2S MCLK output is enabled or not.
+                                  This parameter can be a value of @ref I2S_MCLK_Output */
+
+  uint32_t I2S_AudioFreq;    /*!< Specifies the frequency selected for the I2S communication.
+                                  This parameter can be a value of @ref I2S_Audio_Frequency */
+
+  uint16_t I2S_CPOL;         /*!< Specifies the idle state of the I2S clock.
+                                  This parameter can be a value of @ref I2S_Clock_Polarity */
+}I2S_InitTypeDef;
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Exported_Constants
+  * @{
+  */
+
+#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \
+                                   ((PERIPH) == SPI2) || \
+                                   ((PERIPH) == SPI3))
+
+#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \
+                                  ((PERIPH) == SPI3))
+
+/** @defgroup SPI_data_direction 
+  * @{
+  */
+  
+#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000)
+#define SPI_Direction_2Lines_RxOnly     ((uint16_t)0x0400)
+#define SPI_Direction_1Line_Rx          ((uint16_t)0x8000)
+#define SPI_Direction_1Line_Tx          ((uint16_t)0xC000)
+#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \
+                                     ((MODE) == SPI_Direction_2Lines_RxOnly) || \
+                                     ((MODE) == SPI_Direction_1Line_Rx) || \
+                                     ((MODE) == SPI_Direction_1Line_Tx))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_mode 
+  * @{
+  */
+
+#define SPI_Mode_Master                 ((uint16_t)0x0104)
+#define SPI_Mode_Slave                  ((uint16_t)0x0000)
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \
+                           ((MODE) == SPI_Mode_Slave))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_data_size 
+  * @{
+  */
+
+#define SPI_DataSize_16b                ((uint16_t)0x0800)
+#define SPI_DataSize_8b                 ((uint16_t)0x0000)
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \
+                                   ((DATASIZE) == SPI_DataSize_8b))
+/**
+  * @}
+  */ 
+
+/** @defgroup SPI_Clock_Polarity 
+  * @{
+  */
+
+#define SPI_CPOL_Low                    ((uint16_t)0x0000)
+#define SPI_CPOL_High                   ((uint16_t)0x0002)
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \
+                           ((CPOL) == SPI_CPOL_High))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Clock_Phase 
+  * @{
+  */
+
+#define SPI_CPHA_1Edge                  ((uint16_t)0x0000)
+#define SPI_CPHA_2Edge                  ((uint16_t)0x0001)
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \
+                           ((CPHA) == SPI_CPHA_2Edge))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Slave_Select_management 
+  * @{
+  */
+
+#define SPI_NSS_Soft                    ((uint16_t)0x0200)
+#define SPI_NSS_Hard                    ((uint16_t)0x0000)
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \
+                         ((NSS) == SPI_NSS_Hard))
+/**
+  * @}
+  */ 
+
+/** @defgroup SPI_BaudRate_Prescaler 
+  * @{
+  */
+
+#define SPI_BaudRatePrescaler_2         ((uint16_t)0x0000)
+#define SPI_BaudRatePrescaler_4         ((uint16_t)0x0008)
+#define SPI_BaudRatePrescaler_8         ((uint16_t)0x0010)
+#define SPI_BaudRatePrescaler_16        ((uint16_t)0x0018)
+#define SPI_BaudRatePrescaler_32        ((uint16_t)0x0020)
+#define SPI_BaudRatePrescaler_64        ((uint16_t)0x0028)
+#define SPI_BaudRatePrescaler_128       ((uint16_t)0x0030)
+#define SPI_BaudRatePrescaler_256       ((uint16_t)0x0038)
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \
+                                              ((PRESCALER) == SPI_BaudRatePrescaler_4) || \
+                                              ((PRESCALER) == SPI_BaudRatePrescaler_8) || \
+                                              ((PRESCALER) == SPI_BaudRatePrescaler_16) || \
+                                              ((PRESCALER) == SPI_BaudRatePrescaler_32) || \
+                                              ((PRESCALER) == SPI_BaudRatePrescaler_64) || \
+                                              ((PRESCALER) == SPI_BaudRatePrescaler_128) || \
+                                              ((PRESCALER) == SPI_BaudRatePrescaler_256))
+/**
+  * @}
+  */ 
+
+/** @defgroup SPI_MSB_LSB_transmission 
+  * @{
+  */
+
+#define SPI_FirstBit_MSB                ((uint16_t)0x0000)
+#define SPI_FirstBit_LSB                ((uint16_t)0x0080)
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \
+                               ((BIT) == SPI_FirstBit_LSB))
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Mode 
+  * @{
+  */
+
+#define I2S_Mode_SlaveTx                ((uint16_t)0x0000)
+#define I2S_Mode_SlaveRx                ((uint16_t)0x0100)
+#define I2S_Mode_MasterTx               ((uint16_t)0x0200)
+#define I2S_Mode_MasterRx               ((uint16_t)0x0300)
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \
+                           ((MODE) == I2S_Mode_SlaveRx) || \
+                           ((MODE) == I2S_Mode_MasterTx) || \
+                           ((MODE) == I2S_Mode_MasterRx) )
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Standard 
+  * @{
+  */
+
+#define I2S_Standard_Phillips           ((uint16_t)0x0000)
+#define I2S_Standard_MSB                ((uint16_t)0x0010)
+#define I2S_Standard_LSB                ((uint16_t)0x0020)
+#define I2S_Standard_PCMShort           ((uint16_t)0x0030)
+#define I2S_Standard_PCMLong            ((uint16_t)0x00B0)
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \
+                                   ((STANDARD) == I2S_Standard_MSB) || \
+                                   ((STANDARD) == I2S_Standard_LSB) || \
+                                   ((STANDARD) == I2S_Standard_PCMShort) || \
+                                   ((STANDARD) == I2S_Standard_PCMLong))
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Data_Format 
+  * @{
+  */
+
+#define I2S_DataFormat_16b              ((uint16_t)0x0000)
+#define I2S_DataFormat_16bextended      ((uint16_t)0x0001)
+#define I2S_DataFormat_24b              ((uint16_t)0x0003)
+#define I2S_DataFormat_32b              ((uint16_t)0x0005)
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \
+                                    ((FORMAT) == I2S_DataFormat_16bextended) || \
+                                    ((FORMAT) == I2S_DataFormat_24b) || \
+                                    ((FORMAT) == I2S_DataFormat_32b))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2S_MCLK_Output 
+  * @{
+  */
+
+#define I2S_MCLKOutput_Enable           ((uint16_t)0x0200)
+#define I2S_MCLKOutput_Disable          ((uint16_t)0x0000)
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \
+                                    ((OUTPUT) == I2S_MCLKOutput_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup I2S_Audio_Frequency 
+  * @{
+  */
+
+#define I2S_AudioFreq_192k               ((uint32_t)192000)
+#define I2S_AudioFreq_96k                ((uint32_t)96000)
+#define I2S_AudioFreq_48k                ((uint32_t)48000)
+#define I2S_AudioFreq_44k                ((uint32_t)44100)
+#define I2S_AudioFreq_32k                ((uint32_t)32000)
+#define I2S_AudioFreq_22k                ((uint32_t)22050)
+#define I2S_AudioFreq_16k                ((uint32_t)16000)
+#define I2S_AudioFreq_11k                ((uint32_t)11025)
+#define I2S_AudioFreq_8k                 ((uint32_t)8000)
+#define I2S_AudioFreq_Default            ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AudioFreq_8k) && \
+                                  ((FREQ) <= I2S_AudioFreq_192k)) || \
+                                 ((FREQ) == I2S_AudioFreq_Default))
+/**
+  * @}
+  */ 
+
+/** @defgroup I2S_Clock_Polarity 
+  * @{
+  */
+
+#define I2S_CPOL_Low                    ((uint16_t)0x0000)
+#define I2S_CPOL_High                   ((uint16_t)0x0008)
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \
+                           ((CPOL) == I2S_CPOL_High))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_I2S_DMA_transfer_requests 
+  * @{
+  */
+
+#define SPI_I2S_DMAReq_Tx               ((uint16_t)0x0002)
+#define SPI_I2S_DMAReq_Rx               ((uint16_t)0x0001)
+#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_NSS_internal_software_management 
+  * @{
+  */
+
+#define SPI_NSSInternalSoft_Set         ((uint16_t)0x0100)
+#define SPI_NSSInternalSoft_Reset       ((uint16_t)0xFEFF)
+#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \
+                                       ((INTERNAL) == SPI_NSSInternalSoft_Reset))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_CRC_Transmit_Receive 
+  * @{
+  */
+
+#define SPI_CRC_Tx                      ((uint8_t)0x00)
+#define SPI_CRC_Rx                      ((uint8_t)0x01)
+#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_direction_transmit_receive 
+  * @{
+  */
+
+#define SPI_Direction_Rx                ((uint16_t)0xBFFF)
+#define SPI_Direction_Tx                ((uint16_t)0x4000)
+#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \
+                                     ((DIRECTION) == SPI_Direction_Tx))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_I2S_interrupts_definition 
+  * @{
+  */
+
+#define SPI_I2S_IT_TXE                  ((uint8_t)0x71)
+#define SPI_I2S_IT_RXNE                 ((uint8_t)0x60)
+#define SPI_I2S_IT_ERR                  ((uint8_t)0x50)
+#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \
+                                 ((IT) == SPI_I2S_IT_RXNE) || \
+                                 ((IT) == SPI_I2S_IT_ERR))
+#define SPI_I2S_IT_OVR                  ((uint8_t)0x56)
+#define SPI_IT_MODF                     ((uint8_t)0x55)
+#define SPI_IT_CRCERR                   ((uint8_t)0x54)
+#define I2S_IT_UDR                      ((uint8_t)0x53)
+#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR))
+#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \
+                               ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \
+                               ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_I2S_flags_definition 
+  * @{
+  */
+
+#define SPI_I2S_FLAG_RXNE               ((uint16_t)0x0001)
+#define SPI_I2S_FLAG_TXE                ((uint16_t)0x0002)
+#define I2S_FLAG_CHSIDE                 ((uint16_t)0x0004)
+#define I2S_FLAG_UDR                    ((uint16_t)0x0008)
+#define SPI_FLAG_CRCERR                 ((uint16_t)0x0010)
+#define SPI_FLAG_MODF                   ((uint16_t)0x0020)
+#define SPI_I2S_FLAG_OVR                ((uint16_t)0x0040)
+#define SPI_I2S_FLAG_BSY                ((uint16_t)0x0080)
+#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR))
+#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \
+                                   ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \
+                                   ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \
+                                   ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE))
+/**
+  * @}
+  */
+
+/** @defgroup SPI_CRC_polynomial 
+  * @{
+  */
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Exported_Functions
+  * @{
+  */
+
+void SPI_I2S_DeInit(SPI_TypeDef* SPIx);
+void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct);
+void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct);
+void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct);
+void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct);
+void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState);
+void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState);
+void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data);
+uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx);
+void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft);
+void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState);
+void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize);
+void SPI_TransmitCRC(SPI_TypeDef* SPIx);
+void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState);
+uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC);
+uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx);
+void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction);
+FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
+void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG);
+ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
+void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_SPI_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_tim.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_tim.h
new file mode 100644
index 0000000000000000000000000000000000000000..cd7ac3e9c78db12cad9663598cacf65ab0516ac2
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_tim.h
@@ -0,0 +1,1164 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_tim.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the TIM firmware 
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_TIM_H
+#define __STM32F10x_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup TIM
+  * @{
+  */ 
+
+/** @defgroup TIM_Exported_Types
+  * @{
+  */ 
+
+/** 
+  * @brief  TIM Time Base Init structure definition
+  * @note   This structure is used with all TIMx except for TIM6 and TIM7.    
+  */
+
+typedef struct
+{
+  uint16_t TIM_Prescaler;         /*!< Specifies the prescaler value used to divide the TIM clock.
+                                       This parameter can be a number between 0x0000 and 0xFFFF */
+
+  uint16_t TIM_CounterMode;       /*!< Specifies the counter mode.
+                                       This parameter can be a value of @ref TIM_Counter_Mode */
+
+  uint16_t TIM_Period;            /*!< Specifies the period value to be loaded into the active
+                                       Auto-Reload Register at the next update event.
+                                       This parameter must be a number between 0x0000 and 0xFFFF.  */ 
+
+  uint16_t TIM_ClockDivision;     /*!< Specifies the clock division.
+                                      This parameter can be a value of @ref TIM_Clock_Division_CKD */
+
+  uint8_t TIM_RepetitionCounter;  /*!< Specifies the repetition counter value. Each time the RCR downcounter
+                                       reaches zero, an update event is generated and counting restarts
+                                       from the RCR value (N).
+                                       This means in PWM mode that (N+1) corresponds to:
+                                          - the number of PWM periods in edge-aligned mode
+                                          - the number of half PWM period in center-aligned mode
+                                       This parameter must be a number between 0x00 and 0xFF. 
+                                       @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_TimeBaseInitTypeDef;       
+
+/** 
+  * @brief  TIM Output Compare Init structure definition  
+  */
+
+typedef struct
+{
+  uint16_t TIM_OCMode;        /*!< Specifies the TIM mode.
+                                   This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+  uint16_t TIM_OutputState;   /*!< Specifies the TIM Output Compare state.
+                                   This parameter can be a value of @ref TIM_Output_Compare_state */
+
+  uint16_t TIM_OutputNState;  /*!< Specifies the TIM complementary Output Compare state.
+                                   This parameter can be a value of @ref TIM_Output_Compare_N_state
+                                   @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint16_t TIM_Pulse;         /*!< Specifies the pulse value to be loaded into the Capture Compare Register. 
+                                   This parameter can be a number between 0x0000 and 0xFFFF */
+
+  uint16_t TIM_OCPolarity;    /*!< Specifies the output polarity.
+                                   This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+  uint16_t TIM_OCNPolarity;   /*!< Specifies the complementary output polarity.
+                                   This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+                                   @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint16_t TIM_OCIdleState;   /*!< Specifies the TIM Output Compare pin state during Idle state.
+                                   This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+                                   @note This parameter is valid only for TIM1 and TIM8. */
+
+  uint16_t TIM_OCNIdleState;  /*!< Specifies the TIM Output Compare pin state during Idle state.
+                                   This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+                                   @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OCInitTypeDef;
+
+/** 
+  * @brief  TIM Input Capture Init structure definition  
+  */
+
+typedef struct
+{
+
+  uint16_t TIM_Channel;      /*!< Specifies the TIM channel.
+                                  This parameter can be a value of @ref TIM_Channel */
+
+  uint16_t TIM_ICPolarity;   /*!< Specifies the active edge of the input signal.
+                                  This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+  uint16_t TIM_ICSelection;  /*!< Specifies the input.
+                                  This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+  uint16_t TIM_ICPrescaler;  /*!< Specifies the Input Capture Prescaler.
+                                  This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+  uint16_t TIM_ICFilter;     /*!< Specifies the input capture filter.
+                                  This parameter can be a number between 0x0 and 0xF */
+} TIM_ICInitTypeDef;
+
+/** 
+  * @brief  BDTR structure definition 
+  * @note   This structure is used only with TIM1 and TIM8.    
+  */
+
+typedef struct
+{
+
+  uint16_t TIM_OSSRState;        /*!< Specifies the Off-State selection used in Run mode.
+                                      This parameter can be a value of @ref OSSR_Off_State_Selection_for_Run_mode_state */
+
+  uint16_t TIM_OSSIState;        /*!< Specifies the Off-State used in Idle state.
+                                      This parameter can be a value of @ref OSSI_Off_State_Selection_for_Idle_mode_state */
+
+  uint16_t TIM_LOCKLevel;        /*!< Specifies the LOCK level parameters.
+                                      This parameter can be a value of @ref Lock_level */ 
+
+  uint16_t TIM_DeadTime;         /*!< Specifies the delay time between the switching-off and the
+                                      switching-on of the outputs.
+                                      This parameter can be a number between 0x00 and 0xFF  */
+
+  uint16_t TIM_Break;            /*!< Specifies whether the TIM Break input is enabled or not. 
+                                      This parameter can be a value of @ref Break_Input_enable_disable */
+
+  uint16_t TIM_BreakPolarity;    /*!< Specifies the TIM Break Input pin polarity.
+                                      This parameter can be a value of @ref Break_Polarity */
+
+  uint16_t TIM_AutomaticOutput;  /*!< Specifies whether the TIM Automatic Output feature is enabled or not. 
+                                      This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BDTRInitTypeDef;
+
+/** @defgroup TIM_Exported_constants 
+  * @{
+  */
+
+#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+                                   ((PERIPH) == TIM2) || \
+                                   ((PERIPH) == TIM3) || \
+                                   ((PERIPH) == TIM4) || \
+                                   ((PERIPH) == TIM5) || \
+                                   ((PERIPH) == TIM6) || \
+                                   ((PERIPH) == TIM7) || \
+                                   ((PERIPH) == TIM8) || \
+                                   ((PERIPH) == TIM9) || \
+                                   ((PERIPH) == TIM10)|| \
+                                   ((PERIPH) == TIM11)|| \
+                                   ((PERIPH) == TIM12)|| \
+                                   ((PERIPH) == TIM13)|| \
+                                   ((PERIPH) == TIM14)|| \
+                                   ((PERIPH) == TIM15)|| \
+                                   ((PERIPH) == TIM16)|| \
+                                   ((PERIPH) == TIM17))
+
+/* LIST1: TIM 1 and 8 */
+#define IS_TIM_LIST1_PERIPH(PERIPH)  (((PERIPH) == TIM1) || \
+                                      ((PERIPH) == TIM8))
+
+/* LIST2: TIM 1, 8, 15 16 and 17 */
+#define IS_TIM_LIST2_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+                                     ((PERIPH) == TIM8) || \
+                                     ((PERIPH) == TIM15)|| \
+                                     ((PERIPH) == TIM16)|| \
+                                     ((PERIPH) == TIM17)) 
+
+/* LIST3: TIM 1, 2, 3, 4, 5 and 8 */
+#define IS_TIM_LIST3_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+                                     ((PERIPH) == TIM2) || \
+                                     ((PERIPH) == TIM3) || \
+                                     ((PERIPH) == TIM4) || \
+                                     ((PERIPH) == TIM5) || \
+                                     ((PERIPH) == TIM8)) 
+									                                 
+/* LIST4: TIM 1, 2, 3, 4, 5, 8, 15, 16 and 17 */
+#define IS_TIM_LIST4_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+                                     ((PERIPH) == TIM2) || \
+                                     ((PERIPH) == TIM3) || \
+                                     ((PERIPH) == TIM4) || \
+                                     ((PERIPH) == TIM5) || \
+                                     ((PERIPH) == TIM8) || \
+                                     ((PERIPH) == TIM15)|| \
+                                     ((PERIPH) == TIM16)|| \
+                                     ((PERIPH) == TIM17))
+
+/* LIST5: TIM 1, 2, 3, 4, 5, 8 and 15 */                                            
+#define IS_TIM_LIST5_PERIPH(PERIPH) (((PERIPH) == TIM1) || \
+                                     ((PERIPH) == TIM2) || \
+                                     ((PERIPH) == TIM3) || \
+                                     ((PERIPH) == TIM4) || \
+                                     ((PERIPH) == TIM5) || \
+                                     ((PERIPH) == TIM8) || \
+                                     ((PERIPH) == TIM15)) 
+
+/* LIST6: TIM 1, 2, 3, 4, 5, 8, 9, 12 and 15 */
+#define IS_TIM_LIST6_PERIPH(PERIPH)  (((PERIPH) == TIM1) || \
+                                      ((PERIPH) == TIM2) || \
+                                      ((PERIPH) == TIM3) || \
+                                      ((PERIPH) == TIM4) || \
+                                      ((PERIPH) == TIM5) || \
+                                      ((PERIPH) == TIM8) || \
+                                      ((PERIPH) == TIM9) || \
+									  ((PERIPH) == TIM12)|| \
+                                      ((PERIPH) == TIM15))
+
+/* LIST7: TIM 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 and 15 */
+#define IS_TIM_LIST7_PERIPH(PERIPH)  (((PERIPH) == TIM1) || \
+                                      ((PERIPH) == TIM2) || \
+                                      ((PERIPH) == TIM3) || \
+                                      ((PERIPH) == TIM4) || \
+                                      ((PERIPH) == TIM5) || \
+                                      ((PERIPH) == TIM6) || \
+                                      ((PERIPH) == TIM7) || \
+                                      ((PERIPH) == TIM8) || \
+                                      ((PERIPH) == TIM9) || \
+                                      ((PERIPH) == TIM12)|| \
+                                      ((PERIPH) == TIM15))                                    
+
+/* LIST8: TIM 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13, 14, 15, 16 and 17 */                                        
+#define IS_TIM_LIST8_PERIPH(PERIPH)  (((PERIPH) == TIM1) || \
+                                      ((PERIPH) == TIM2) || \
+                                      ((PERIPH) == TIM3) || \
+                                      ((PERIPH) == TIM4) || \
+                                      ((PERIPH) == TIM5) || \
+                                      ((PERIPH) == TIM8) || \
+                                      ((PERIPH) == TIM9) || \
+                                      ((PERIPH) == TIM10)|| \
+                                      ((PERIPH) == TIM11)|| \
+                                      ((PERIPH) == TIM12)|| \
+                                      ((PERIPH) == TIM13)|| \
+                                      ((PERIPH) == TIM14)|| \
+                                      ((PERIPH) == TIM15)|| \
+                                      ((PERIPH) == TIM16)|| \
+                                      ((PERIPH) == TIM17))
+
+/* LIST9: TIM 1, 2, 3, 4, 5, 6, 7, 8, 15, 16, and 17 */
+#define IS_TIM_LIST9_PERIPH(PERIPH)  (((PERIPH) == TIM1) || \
+                                      ((PERIPH) == TIM2) || \
+                                      ((PERIPH) == TIM3) || \
+                                      ((PERIPH) == TIM4) || \
+                                      ((PERIPH) == TIM5) || \
+                                      ((PERIPH) == TIM6) || \
+                                      ((PERIPH) == TIM7) || \
+                                      ((PERIPH) == TIM8) || \
+                                      ((PERIPH) == TIM15)|| \
+                                      ((PERIPH) == TIM16)|| \
+                                      ((PERIPH) == TIM17))  
+                                                                                                                                                                                                                          
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes 
+  * @{
+  */
+
+#define TIM_OCMode_Timing                  ((uint16_t)0x0000)
+#define TIM_OCMode_Active                  ((uint16_t)0x0010)
+#define TIM_OCMode_Inactive                ((uint16_t)0x0020)
+#define TIM_OCMode_Toggle                  ((uint16_t)0x0030)
+#define TIM_OCMode_PWM1                    ((uint16_t)0x0060)
+#define TIM_OCMode_PWM2                    ((uint16_t)0x0070)
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \
+                              ((MODE) == TIM_OCMode_Active) || \
+                              ((MODE) == TIM_OCMode_Inactive) || \
+                              ((MODE) == TIM_OCMode_Toggle)|| \
+                              ((MODE) == TIM_OCMode_PWM1) || \
+                              ((MODE) == TIM_OCMode_PWM2))
+#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \
+                          ((MODE) == TIM_OCMode_Active) || \
+                          ((MODE) == TIM_OCMode_Inactive) || \
+                          ((MODE) == TIM_OCMode_Toggle)|| \
+                          ((MODE) == TIM_OCMode_PWM1) || \
+                          ((MODE) == TIM_OCMode_PWM2) ||	\
+                          ((MODE) == TIM_ForcedAction_Active) || \
+                          ((MODE) == TIM_ForcedAction_InActive))
+/**
+  * @}
+  */
+
+/** @defgroup TIM_One_Pulse_Mode 
+  * @{
+  */
+
+#define TIM_OPMode_Single                  ((uint16_t)0x0008)
+#define TIM_OPMode_Repetitive              ((uint16_t)0x0000)
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \
+                               ((MODE) == TIM_OPMode_Repetitive))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Channel 
+  * @{
+  */
+
+#define TIM_Channel_1                      ((uint16_t)0x0000)
+#define TIM_Channel_2                      ((uint16_t)0x0004)
+#define TIM_Channel_3                      ((uint16_t)0x0008)
+#define TIM_Channel_4                      ((uint16_t)0x000C)
+#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+                                 ((CHANNEL) == TIM_Channel_2) || \
+                                 ((CHANNEL) == TIM_Channel_3) || \
+                                 ((CHANNEL) == TIM_Channel_4))
+#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+                                      ((CHANNEL) == TIM_Channel_2))
+#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \
+                                               ((CHANNEL) == TIM_Channel_2) || \
+                                               ((CHANNEL) == TIM_Channel_3))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Clock_Division_CKD 
+  * @{
+  */
+
+#define TIM_CKD_DIV1                       ((uint16_t)0x0000)
+#define TIM_CKD_DIV2                       ((uint16_t)0x0100)
+#define TIM_CKD_DIV4                       ((uint16_t)0x0200)
+#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \
+                             ((DIV) == TIM_CKD_DIV2) || \
+                             ((DIV) == TIM_CKD_DIV4))
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Counter_Mode 
+  * @{
+  */
+
+#define TIM_CounterMode_Up                 ((uint16_t)0x0000)
+#define TIM_CounterMode_Down               ((uint16_t)0x0010)
+#define TIM_CounterMode_CenterAligned1     ((uint16_t)0x0020)
+#define TIM_CounterMode_CenterAligned2     ((uint16_t)0x0040)
+#define TIM_CounterMode_CenterAligned3     ((uint16_t)0x0060)
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) ||  \
+                                   ((MODE) == TIM_CounterMode_Down) || \
+                                   ((MODE) == TIM_CounterMode_CenterAligned1) || \
+                                   ((MODE) == TIM_CounterMode_CenterAligned2) || \
+                                   ((MODE) == TIM_CounterMode_CenterAligned3))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Output_Compare_Polarity 
+  * @{
+  */
+
+#define TIM_OCPolarity_High                ((uint16_t)0x0000)
+#define TIM_OCPolarity_Low                 ((uint16_t)0x0002)
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \
+                                      ((POLARITY) == TIM_OCPolarity_Low))
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_N_Polarity 
+  * @{
+  */
+  
+#define TIM_OCNPolarity_High               ((uint16_t)0x0000)
+#define TIM_OCNPolarity_Low                ((uint16_t)0x0008)
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \
+                                       ((POLARITY) == TIM_OCNPolarity_Low))
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Output_Compare_state 
+  * @{
+  */
+
+#define TIM_OutputState_Disable            ((uint16_t)0x0000)
+#define TIM_OutputState_Enable             ((uint16_t)0x0001)
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \
+                                    ((STATE) == TIM_OutputState_Enable))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Output_Compare_N_state 
+  * @{
+  */
+
+#define TIM_OutputNState_Disable           ((uint16_t)0x0000)
+#define TIM_OutputNState_Enable            ((uint16_t)0x0004)
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \
+                                     ((STATE) == TIM_OutputNState_Enable))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Capture_Compare_state 
+  * @{
+  */
+
+#define TIM_CCx_Enable                      ((uint16_t)0x0001)
+#define TIM_CCx_Disable                     ((uint16_t)0x0000)
+#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \
+                         ((CCX) == TIM_CCx_Disable))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Capture_Compare_N_state 
+  * @{
+  */
+
+#define TIM_CCxN_Enable                     ((uint16_t)0x0004)
+#define TIM_CCxN_Disable                    ((uint16_t)0x0000)
+#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \
+                           ((CCXN) == TIM_CCxN_Disable))
+/**
+  * @}
+  */ 
+
+/** @defgroup Break_Input_enable_disable 
+  * @{
+  */
+
+#define TIM_Break_Enable                   ((uint16_t)0x1000)
+#define TIM_Break_Disable                  ((uint16_t)0x0000)
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \
+                                   ((STATE) == TIM_Break_Disable))
+/**
+  * @}
+  */ 
+
+/** @defgroup Break_Polarity 
+  * @{
+  */
+
+#define TIM_BreakPolarity_Low              ((uint16_t)0x0000)
+#define TIM_BreakPolarity_High             ((uint16_t)0x2000)
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \
+                                         ((POLARITY) == TIM_BreakPolarity_High))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_AOE_Bit_Set_Reset 
+  * @{
+  */
+
+#define TIM_AutomaticOutput_Enable         ((uint16_t)0x4000)
+#define TIM_AutomaticOutput_Disable        ((uint16_t)0x0000)
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \
+                                              ((STATE) == TIM_AutomaticOutput_Disable))
+/**
+  * @}
+  */ 
+
+/** @defgroup Lock_level 
+  * @{
+  */
+
+#define TIM_LOCKLevel_OFF                  ((uint16_t)0x0000)
+#define TIM_LOCKLevel_1                    ((uint16_t)0x0100)
+#define TIM_LOCKLevel_2                    ((uint16_t)0x0200)
+#define TIM_LOCKLevel_3                    ((uint16_t)0x0300)
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \
+                                  ((LEVEL) == TIM_LOCKLevel_1) || \
+                                  ((LEVEL) == TIM_LOCKLevel_2) || \
+                                  ((LEVEL) == TIM_LOCKLevel_3))
+/**
+  * @}
+  */ 
+
+/** @defgroup OSSI_Off_State_Selection_for_Idle_mode_state 
+  * @{
+  */
+
+#define TIM_OSSIState_Enable               ((uint16_t)0x0400)
+#define TIM_OSSIState_Disable              ((uint16_t)0x0000)
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \
+                                  ((STATE) == TIM_OSSIState_Disable))
+/**
+  * @}
+  */
+
+/** @defgroup OSSR_Off_State_Selection_for_Run_mode_state 
+  * @{
+  */
+
+#define TIM_OSSRState_Enable               ((uint16_t)0x0800)
+#define TIM_OSSRState_Disable              ((uint16_t)0x0000)
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \
+                                  ((STATE) == TIM_OSSRState_Disable))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Output_Compare_Idle_State 
+  * @{
+  */
+
+#define TIM_OCIdleState_Set                ((uint16_t)0x0100)
+#define TIM_OCIdleState_Reset              ((uint16_t)0x0000)
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \
+                                    ((STATE) == TIM_OCIdleState_Reset))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Output_Compare_N_Idle_State 
+  * @{
+  */
+
+#define TIM_OCNIdleState_Set               ((uint16_t)0x0200)
+#define TIM_OCNIdleState_Reset             ((uint16_t)0x0000)
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \
+                                     ((STATE) == TIM_OCNIdleState_Reset))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Input_Capture_Polarity 
+  * @{
+  */
+
+#define  TIM_ICPolarity_Rising             ((uint16_t)0x0000)
+#define  TIM_ICPolarity_Falling            ((uint16_t)0x0002)
+#define  TIM_ICPolarity_BothEdge           ((uint16_t)0x000A)
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \
+                                      ((POLARITY) == TIM_ICPolarity_Falling))
+#define IS_TIM_IC_POLARITY_LITE(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \
+                                           ((POLARITY) == TIM_ICPolarity_Falling)|| \
+                                           ((POLARITY) == TIM_ICPolarity_BothEdge))                                      
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Input_Capture_Selection 
+  * @{
+  */
+
+#define TIM_ICSelection_DirectTI           ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be 
+                                                                   connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSelection_IndirectTI         ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+                                                                   connected to IC2, IC1, IC4 or IC3, respectively. */
+#define TIM_ICSelection_TRC                ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \
+                                        ((SELECTION) == TIM_ICSelection_IndirectTI) || \
+                                        ((SELECTION) == TIM_ICSelection_TRC))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Input_Capture_Prescaler 
+  * @{
+  */
+
+#define TIM_ICPSC_DIV1                     ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */
+#define TIM_ICPSC_DIV2                     ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */
+#define TIM_ICPSC_DIV4                     ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */
+#define TIM_ICPSC_DIV8                     ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+                                        ((PRESCALER) == TIM_ICPSC_DIV2) || \
+                                        ((PRESCALER) == TIM_ICPSC_DIV4) || \
+                                        ((PRESCALER) == TIM_ICPSC_DIV8))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_interrupt_sources 
+  * @{
+  */
+
+#define TIM_IT_Update                      ((uint16_t)0x0001)
+#define TIM_IT_CC1                         ((uint16_t)0x0002)
+#define TIM_IT_CC2                         ((uint16_t)0x0004)
+#define TIM_IT_CC3                         ((uint16_t)0x0008)
+#define TIM_IT_CC4                         ((uint16_t)0x0010)
+#define TIM_IT_COM                         ((uint16_t)0x0020)
+#define TIM_IT_Trigger                     ((uint16_t)0x0040)
+#define TIM_IT_Break                       ((uint16_t)0x0080)
+#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000))
+
+#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \
+                           ((IT) == TIM_IT_CC1) || \
+                           ((IT) == TIM_IT_CC2) || \
+                           ((IT) == TIM_IT_CC3) || \
+                           ((IT) == TIM_IT_CC4) || \
+                           ((IT) == TIM_IT_COM) || \
+                           ((IT) == TIM_IT_Trigger) || \
+                           ((IT) == TIM_IT_Break))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_DMA_Base_address 
+  * @{
+  */
+
+#define TIM_DMABase_CR1                    ((uint16_t)0x0000)
+#define TIM_DMABase_CR2                    ((uint16_t)0x0001)
+#define TIM_DMABase_SMCR                   ((uint16_t)0x0002)
+#define TIM_DMABase_DIER                   ((uint16_t)0x0003)
+#define TIM_DMABase_SR                     ((uint16_t)0x0004)
+#define TIM_DMABase_EGR                    ((uint16_t)0x0005)
+#define TIM_DMABase_CCMR1                  ((uint16_t)0x0006)
+#define TIM_DMABase_CCMR2                  ((uint16_t)0x0007)
+#define TIM_DMABase_CCER                   ((uint16_t)0x0008)
+#define TIM_DMABase_CNT                    ((uint16_t)0x0009)
+#define TIM_DMABase_PSC                    ((uint16_t)0x000A)
+#define TIM_DMABase_ARR                    ((uint16_t)0x000B)
+#define TIM_DMABase_RCR                    ((uint16_t)0x000C)
+#define TIM_DMABase_CCR1                   ((uint16_t)0x000D)
+#define TIM_DMABase_CCR2                   ((uint16_t)0x000E)
+#define TIM_DMABase_CCR3                   ((uint16_t)0x000F)
+#define TIM_DMABase_CCR4                   ((uint16_t)0x0010)
+#define TIM_DMABase_BDTR                   ((uint16_t)0x0011)
+#define TIM_DMABase_DCR                    ((uint16_t)0x0012)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+                               ((BASE) == TIM_DMABase_CR2) || \
+                               ((BASE) == TIM_DMABase_SMCR) || \
+                               ((BASE) == TIM_DMABase_DIER) || \
+                               ((BASE) == TIM_DMABase_SR) || \
+                               ((BASE) == TIM_DMABase_EGR) || \
+                               ((BASE) == TIM_DMABase_CCMR1) || \
+                               ((BASE) == TIM_DMABase_CCMR2) || \
+                               ((BASE) == TIM_DMABase_CCER) || \
+                               ((BASE) == TIM_DMABase_CNT) || \
+                               ((BASE) == TIM_DMABase_PSC) || \
+                               ((BASE) == TIM_DMABase_ARR) || \
+                               ((BASE) == TIM_DMABase_RCR) || \
+                               ((BASE) == TIM_DMABase_CCR1) || \
+                               ((BASE) == TIM_DMABase_CCR2) || \
+                               ((BASE) == TIM_DMABase_CCR3) || \
+                               ((BASE) == TIM_DMABase_CCR4) || \
+                               ((BASE) == TIM_DMABase_BDTR) || \
+                               ((BASE) == TIM_DMABase_DCR))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_DMA_Burst_Length 
+  * @{
+  */
+
+#define TIM_DMABurstLength_1Transfer           ((uint16_t)0x0000)
+#define TIM_DMABurstLength_2Transfers          ((uint16_t)0x0100)
+#define TIM_DMABurstLength_3Transfers          ((uint16_t)0x0200)
+#define TIM_DMABurstLength_4Transfers          ((uint16_t)0x0300)
+#define TIM_DMABurstLength_5Transfers          ((uint16_t)0x0400)
+#define TIM_DMABurstLength_6Transfers          ((uint16_t)0x0500)
+#define TIM_DMABurstLength_7Transfers          ((uint16_t)0x0600)
+#define TIM_DMABurstLength_8Transfers          ((uint16_t)0x0700)
+#define TIM_DMABurstLength_9Transfers          ((uint16_t)0x0800)
+#define TIM_DMABurstLength_10Transfers         ((uint16_t)0x0900)
+#define TIM_DMABurstLength_11Transfers         ((uint16_t)0x0A00)
+#define TIM_DMABurstLength_12Transfers         ((uint16_t)0x0B00)
+#define TIM_DMABurstLength_13Transfers         ((uint16_t)0x0C00)
+#define TIM_DMABurstLength_14Transfers         ((uint16_t)0x0D00)
+#define TIM_DMABurstLength_15Transfers         ((uint16_t)0x0E00)
+#define TIM_DMABurstLength_16Transfers         ((uint16_t)0x0F00)
+#define TIM_DMABurstLength_17Transfers         ((uint16_t)0x1000)
+#define TIM_DMABurstLength_18Transfers         ((uint16_t)0x1100)
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
+                                   ((LENGTH) == TIM_DMABurstLength_2Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_3Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_4Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_5Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_6Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_7Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_8Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_9Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_10Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_11Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_12Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_13Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_14Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_15Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_16Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_17Transfers) || \
+                                   ((LENGTH) == TIM_DMABurstLength_18Transfers))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_DMA_sources 
+  * @{
+  */
+
+#define TIM_DMA_Update                     ((uint16_t)0x0100)
+#define TIM_DMA_CC1                        ((uint16_t)0x0200)
+#define TIM_DMA_CC2                        ((uint16_t)0x0400)
+#define TIM_DMA_CC3                        ((uint16_t)0x0800)
+#define TIM_DMA_CC4                        ((uint16_t)0x1000)
+#define TIM_DMA_COM                        ((uint16_t)0x2000)
+#define TIM_DMA_Trigger                    ((uint16_t)0x4000)
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000))
+
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_External_Trigger_Prescaler 
+  * @{
+  */
+
+#define TIM_ExtTRGPSC_OFF                  ((uint16_t)0x0000)
+#define TIM_ExtTRGPSC_DIV2                 ((uint16_t)0x1000)
+#define TIM_ExtTRGPSC_DIV4                 ((uint16_t)0x2000)
+#define TIM_ExtTRGPSC_DIV8                 ((uint16_t)0x3000)
+#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \
+                                         ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \
+                                         ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \
+                                         ((PRESCALER) == TIM_ExtTRGPSC_DIV8))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Internal_Trigger_Selection 
+  * @{
+  */
+
+#define TIM_TS_ITR0                        ((uint16_t)0x0000)
+#define TIM_TS_ITR1                        ((uint16_t)0x0010)
+#define TIM_TS_ITR2                        ((uint16_t)0x0020)
+#define TIM_TS_ITR3                        ((uint16_t)0x0030)
+#define TIM_TS_TI1F_ED                     ((uint16_t)0x0040)
+#define TIM_TS_TI1FP1                      ((uint16_t)0x0050)
+#define TIM_TS_TI2FP2                      ((uint16_t)0x0060)
+#define TIM_TS_ETRF                        ((uint16_t)0x0070)
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+                                             ((SELECTION) == TIM_TS_ITR1) || \
+                                             ((SELECTION) == TIM_TS_ITR2) || \
+                                             ((SELECTION) == TIM_TS_ITR3) || \
+                                             ((SELECTION) == TIM_TS_TI1F_ED) || \
+                                             ((SELECTION) == TIM_TS_TI1FP1) || \
+                                             ((SELECTION) == TIM_TS_TI2FP2) || \
+                                             ((SELECTION) == TIM_TS_ETRF))
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+                                                      ((SELECTION) == TIM_TS_ITR1) || \
+                                                      ((SELECTION) == TIM_TS_ITR2) || \
+                                                      ((SELECTION) == TIM_TS_ITR3))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_TIx_External_Clock_Source 
+  * @{
+  */
+
+#define TIM_TIxExternalCLK1Source_TI1      ((uint16_t)0x0050)
+#define TIM_TIxExternalCLK1Source_TI2      ((uint16_t)0x0060)
+#define TIM_TIxExternalCLK1Source_TI1ED    ((uint16_t)0x0040)
+#define IS_TIM_TIXCLK_SOURCE(SOURCE) (((SOURCE) == TIM_TIxExternalCLK1Source_TI1) || \
+                                      ((SOURCE) == TIM_TIxExternalCLK1Source_TI2) || \
+                                      ((SOURCE) == TIM_TIxExternalCLK1Source_TI1ED))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_External_Trigger_Polarity 
+  * @{
+  */ 
+#define TIM_ExtTRGPolarity_Inverted        ((uint16_t)0x8000)
+#define TIM_ExtTRGPolarity_NonInverted     ((uint16_t)0x0000)
+#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \
+                                       ((POLARITY) == TIM_ExtTRGPolarity_NonInverted))
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Prescaler_Reload_Mode 
+  * @{
+  */
+
+#define TIM_PSCReloadMode_Update           ((uint16_t)0x0000)
+#define TIM_PSCReloadMode_Immediate        ((uint16_t)0x0001)
+#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \
+                                         ((RELOAD) == TIM_PSCReloadMode_Immediate))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Forced_Action 
+  * @{
+  */
+
+#define TIM_ForcedAction_Active            ((uint16_t)0x0050)
+#define TIM_ForcedAction_InActive          ((uint16_t)0x0040)
+#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \
+                                      ((ACTION) == TIM_ForcedAction_InActive))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Encoder_Mode 
+  * @{
+  */
+
+#define TIM_EncoderMode_TI1                ((uint16_t)0x0001)
+#define TIM_EncoderMode_TI2                ((uint16_t)0x0002)
+#define TIM_EncoderMode_TI12               ((uint16_t)0x0003)
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \
+                                   ((MODE) == TIM_EncoderMode_TI2) || \
+                                   ((MODE) == TIM_EncoderMode_TI12))
+/**
+  * @}
+  */ 
+
+
+/** @defgroup TIM_Event_Source 
+  * @{
+  */
+
+#define TIM_EventSource_Update             ((uint16_t)0x0001)
+#define TIM_EventSource_CC1                ((uint16_t)0x0002)
+#define TIM_EventSource_CC2                ((uint16_t)0x0004)
+#define TIM_EventSource_CC3                ((uint16_t)0x0008)
+#define TIM_EventSource_CC4                ((uint16_t)0x0010)
+#define TIM_EventSource_COM                ((uint16_t)0x0020)
+#define TIM_EventSource_Trigger            ((uint16_t)0x0040)
+#define TIM_EventSource_Break              ((uint16_t)0x0080)
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000))
+
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Update_Source 
+  * @{
+  */
+
+#define TIM_UpdateSource_Global            ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow
+                                                                   or the setting of UG bit, or an update generation
+                                                                   through the slave mode controller. */
+#define TIM_UpdateSource_Regular           ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */
+#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \
+                                      ((SOURCE) == TIM_UpdateSource_Regular))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Output_Compare_Preload_State 
+  * @{
+  */
+
+#define TIM_OCPreload_Enable               ((uint16_t)0x0008)
+#define TIM_OCPreload_Disable              ((uint16_t)0x0000)
+#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \
+                                       ((STATE) == TIM_OCPreload_Disable))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Output_Compare_Fast_State 
+  * @{
+  */
+
+#define TIM_OCFast_Enable                  ((uint16_t)0x0004)
+#define TIM_OCFast_Disable                 ((uint16_t)0x0000)
+#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \
+                                    ((STATE) == TIM_OCFast_Disable))
+                                     
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Output_Compare_Clear_State 
+  * @{
+  */
+
+#define TIM_OCClear_Enable                 ((uint16_t)0x0080)
+#define TIM_OCClear_Disable                ((uint16_t)0x0000)
+#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \
+                                     ((STATE) == TIM_OCClear_Disable))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Trigger_Output_Source 
+  * @{
+  */
+
+#define TIM_TRGOSource_Reset               ((uint16_t)0x0000)
+#define TIM_TRGOSource_Enable              ((uint16_t)0x0010)
+#define TIM_TRGOSource_Update              ((uint16_t)0x0020)
+#define TIM_TRGOSource_OC1                 ((uint16_t)0x0030)
+#define TIM_TRGOSource_OC1Ref              ((uint16_t)0x0040)
+#define TIM_TRGOSource_OC2Ref              ((uint16_t)0x0050)
+#define TIM_TRGOSource_OC3Ref              ((uint16_t)0x0060)
+#define TIM_TRGOSource_OC4Ref              ((uint16_t)0x0070)
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \
+                                    ((SOURCE) == TIM_TRGOSource_Enable) || \
+                                    ((SOURCE) == TIM_TRGOSource_Update) || \
+                                    ((SOURCE) == TIM_TRGOSource_OC1) || \
+                                    ((SOURCE) == TIM_TRGOSource_OC1Ref) || \
+                                    ((SOURCE) == TIM_TRGOSource_OC2Ref) || \
+                                    ((SOURCE) == TIM_TRGOSource_OC3Ref) || \
+                                    ((SOURCE) == TIM_TRGOSource_OC4Ref))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Slave_Mode 
+  * @{
+  */
+
+#define TIM_SlaveMode_Reset                ((uint16_t)0x0004)
+#define TIM_SlaveMode_Gated                ((uint16_t)0x0005)
+#define TIM_SlaveMode_Trigger              ((uint16_t)0x0006)
+#define TIM_SlaveMode_External1            ((uint16_t)0x0007)
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \
+                                 ((MODE) == TIM_SlaveMode_Gated) || \
+                                 ((MODE) == TIM_SlaveMode_Trigger) || \
+                                 ((MODE) == TIM_SlaveMode_External1))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Master_Slave_Mode 
+  * @{
+  */
+
+#define TIM_MasterSlaveMode_Enable         ((uint16_t)0x0080)
+#define TIM_MasterSlaveMode_Disable        ((uint16_t)0x0000)
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \
+                                 ((STATE) == TIM_MasterSlaveMode_Disable))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Flags 
+  * @{
+  */
+
+#define TIM_FLAG_Update                    ((uint16_t)0x0001)
+#define TIM_FLAG_CC1                       ((uint16_t)0x0002)
+#define TIM_FLAG_CC2                       ((uint16_t)0x0004)
+#define TIM_FLAG_CC3                       ((uint16_t)0x0008)
+#define TIM_FLAG_CC4                       ((uint16_t)0x0010)
+#define TIM_FLAG_COM                       ((uint16_t)0x0020)
+#define TIM_FLAG_Trigger                   ((uint16_t)0x0040)
+#define TIM_FLAG_Break                     ((uint16_t)0x0080)
+#define TIM_FLAG_CC1OF                     ((uint16_t)0x0200)
+#define TIM_FLAG_CC2OF                     ((uint16_t)0x0400)
+#define TIM_FLAG_CC3OF                     ((uint16_t)0x0800)
+#define TIM_FLAG_CC4OF                     ((uint16_t)0x1000)
+#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \
+                               ((FLAG) == TIM_FLAG_CC1) || \
+                               ((FLAG) == TIM_FLAG_CC2) || \
+                               ((FLAG) == TIM_FLAG_CC3) || \
+                               ((FLAG) == TIM_FLAG_CC4) || \
+                               ((FLAG) == TIM_FLAG_COM) || \
+                               ((FLAG) == TIM_FLAG_Trigger) || \
+                               ((FLAG) == TIM_FLAG_Break) || \
+                               ((FLAG) == TIM_FLAG_CC1OF) || \
+                               ((FLAG) == TIM_FLAG_CC2OF) || \
+                               ((FLAG) == TIM_FLAG_CC3OF) || \
+                               ((FLAG) == TIM_FLAG_CC4OF))
+                               
+                               
+#define IS_TIM_CLEAR_FLAG(TIM_FLAG) ((((TIM_FLAG) & (uint16_t)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Input_Capture_Filer_Value 
+  * @{
+  */
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) 
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_External_Trigger_Filter 
+  * @{
+  */
+
+#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF)
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Legacy 
+  * @{
+  */
+
+#define TIM_DMABurstLength_1Byte           TIM_DMABurstLength_1Transfer
+#define TIM_DMABurstLength_2Bytes          TIM_DMABurstLength_2Transfers
+#define TIM_DMABurstLength_3Bytes          TIM_DMABurstLength_3Transfers
+#define TIM_DMABurstLength_4Bytes          TIM_DMABurstLength_4Transfers
+#define TIM_DMABurstLength_5Bytes          TIM_DMABurstLength_5Transfers
+#define TIM_DMABurstLength_6Bytes          TIM_DMABurstLength_6Transfers
+#define TIM_DMABurstLength_7Bytes          TIM_DMABurstLength_7Transfers
+#define TIM_DMABurstLength_8Bytes          TIM_DMABurstLength_8Transfers
+#define TIM_DMABurstLength_9Bytes          TIM_DMABurstLength_9Transfers
+#define TIM_DMABurstLength_10Bytes         TIM_DMABurstLength_10Transfers
+#define TIM_DMABurstLength_11Bytes         TIM_DMABurstLength_11Transfers
+#define TIM_DMABurstLength_12Bytes         TIM_DMABurstLength_12Transfers
+#define TIM_DMABurstLength_13Bytes         TIM_DMABurstLength_13Transfers
+#define TIM_DMABurstLength_14Bytes         TIM_DMABurstLength_14Transfers
+#define TIM_DMABurstLength_15Bytes         TIM_DMABurstLength_15Transfers
+#define TIM_DMABurstLength_16Bytes         TIM_DMABurstLength_16Transfers
+#define TIM_DMABurstLength_17Bytes         TIM_DMABurstLength_17Transfers
+#define TIM_DMABurstLength_18Bytes         TIM_DMABurstLength_18Transfers
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Exported_Functions
+  * @{
+  */
+
+void TIM_DeInit(TIM_TypeDef* TIMx);
+void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
+void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct);
+void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct);
+void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct);
+void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct);
+void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct);
+void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState);
+void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource);
+void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength);
+void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState);
+void TIM_InternalClockConfig(TIM_TypeDef* TIMx);
+void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource,
+                                uint16_t TIM_ICPolarity, uint16_t ICFilter);
+void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+                             uint16_t ExtTRGFilter);
+void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, 
+                             uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter);
+void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+                   uint16_t ExtTRGFilter);
+void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode);
+void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode);
+void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource);
+void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode,
+                                uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity);
+void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction);
+void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload);
+void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast);
+void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear);
+void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity);
+void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity);
+void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx);
+void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN);
+void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode);
+void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource);
+void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState);
+void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode);
+void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource);
+void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode);
+void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode);
+void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter);
+void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload);
+void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1);
+void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2);
+void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3);
+void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4);
+void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC);
+void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD);
+uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx);
+uint16_t TIM_GetCounter(TIM_TypeDef* TIMx);
+uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx);
+FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG);
+void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG);
+ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT);
+void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F10x_TIM_H */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_usart.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_usart.h
new file mode 100644
index 0000000000000000000000000000000000000000..61ae249a4748317174da77e8a9fd8c039a653c1c
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_usart.h
@@ -0,0 +1,412 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_usart.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the USART 
+  *          firmware library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_USART_H
+#define __STM32F10x_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup USART
+  * @{
+  */ 
+
+/** @defgroup USART_Exported_Types
+  * @{
+  */ 
+
+/** 
+  * @brief  USART Init Structure definition  
+  */ 
+  
+typedef struct
+{
+  uint32_t USART_BaudRate;            /*!< This member configures the USART communication baud rate.
+                                           The baud rate is computed using the following formula:
+                                            - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate)))
+                                            - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */
+
+  uint16_t USART_WordLength;          /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter can be a value of @ref USART_Word_Length */
+
+  uint16_t USART_StopBits;            /*!< Specifies the number of stop bits transmitted.
+                                           This parameter can be a value of @ref USART_Stop_Bits */
+
+  uint16_t USART_Parity;              /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref USART_Parity
+                                           @note When parity is enabled, the computed parity is inserted
+                                                 at the MSB position of the transmitted data (9th bit when
+                                                 the word length is set to 9 data bits; 8th bit when the
+                                                 word length is set to 8 data bits). */
+ 
+  uint16_t USART_Mode;                /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref USART_Mode */
+
+  uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled
+                                           or disabled.
+                                           This parameter can be a value of @ref USART_Hardware_Flow_Control */
+} USART_InitTypeDef;
+
+/** 
+  * @brief  USART Clock Init Structure definition  
+  */ 
+  
+typedef struct
+{
+
+  uint16_t USART_Clock;   /*!< Specifies whether the USART clock is enabled or disabled.
+                               This parameter can be a value of @ref USART_Clock */
+
+  uint16_t USART_CPOL;    /*!< Specifies the steady state value of the serial clock.
+                               This parameter can be a value of @ref USART_Clock_Polarity */
+
+  uint16_t USART_CPHA;    /*!< Specifies the clock transition on which the bit capture is made.
+                               This parameter can be a value of @ref USART_Clock_Phase */
+
+  uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+                               data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+                               This parameter can be a value of @ref USART_Last_Bit */
+} USART_ClockInitTypeDef;
+
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Exported_Constants
+  * @{
+  */ 
+  
+#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+                                     ((PERIPH) == USART2) || \
+                                     ((PERIPH) == USART3) || \
+                                     ((PERIPH) == UART4) || \
+                                     ((PERIPH) == UART5))
+
+#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+                                     ((PERIPH) == USART2) || \
+                                     ((PERIPH) == USART3))
+
+#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \
+                                      ((PERIPH) == USART2) || \
+                                      ((PERIPH) == USART3) || \
+                                      ((PERIPH) == UART4))
+/** @defgroup USART_Word_Length 
+  * @{
+  */ 
+  
+#define USART_WordLength_8b                  ((uint16_t)0x0000)
+#define USART_WordLength_9b                  ((uint16_t)0x1000)
+                                    
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \
+                                      ((LENGTH) == USART_WordLength_9b))
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Stop_Bits 
+  * @{
+  */ 
+  
+#define USART_StopBits_1                     ((uint16_t)0x0000)
+#define USART_StopBits_0_5                   ((uint16_t)0x1000)
+#define USART_StopBits_2                     ((uint16_t)0x2000)
+#define USART_StopBits_1_5                   ((uint16_t)0x3000)
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \
+                                     ((STOPBITS) == USART_StopBits_0_5) || \
+                                     ((STOPBITS) == USART_StopBits_2) || \
+                                     ((STOPBITS) == USART_StopBits_1_5))
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Parity 
+  * @{
+  */ 
+  
+#define USART_Parity_No                      ((uint16_t)0x0000)
+#define USART_Parity_Even                    ((uint16_t)0x0400)
+#define USART_Parity_Odd                     ((uint16_t)0x0600) 
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \
+                                 ((PARITY) == USART_Parity_Even) || \
+                                 ((PARITY) == USART_Parity_Odd))
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Mode 
+  * @{
+  */ 
+  
+#define USART_Mode_Rx                        ((uint16_t)0x0004)
+#define USART_Mode_Tx                        ((uint16_t)0x0008)
+#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Hardware_Flow_Control 
+  * @{
+  */ 
+#define USART_HardwareFlowControl_None       ((uint16_t)0x0000)
+#define USART_HardwareFlowControl_RTS        ((uint16_t)0x0100)
+#define USART_HardwareFlowControl_CTS        ((uint16_t)0x0200)
+#define USART_HardwareFlowControl_RTS_CTS    ((uint16_t)0x0300)
+#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\
+                              (((CONTROL) == USART_HardwareFlowControl_None) || \
+                               ((CONTROL) == USART_HardwareFlowControl_RTS) || \
+                               ((CONTROL) == USART_HardwareFlowControl_CTS) || \
+                               ((CONTROL) == USART_HardwareFlowControl_RTS_CTS))
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Clock 
+  * @{
+  */ 
+#define USART_Clock_Disable                  ((uint16_t)0x0000)
+#define USART_Clock_Enable                   ((uint16_t)0x0800)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \
+                               ((CLOCK) == USART_Clock_Enable))
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Clock_Polarity 
+  * @{
+  */
+  
+#define USART_CPOL_Low                       ((uint16_t)0x0000)
+#define USART_CPOL_High                      ((uint16_t)0x0400)
+#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High))
+
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Clock_Phase
+  * @{
+  */
+
+#define USART_CPHA_1Edge                     ((uint16_t)0x0000)
+#define USART_CPHA_2Edge                     ((uint16_t)0x0200)
+#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge))
+
+/**
+  * @}
+  */
+
+/** @defgroup USART_Last_Bit
+  * @{
+  */
+
+#define USART_LastBit_Disable                ((uint16_t)0x0000)
+#define USART_LastBit_Enable                 ((uint16_t)0x0100)
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \
+                                   ((LASTBIT) == USART_LastBit_Enable))
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Interrupt_definition 
+  * @{
+  */
+  
+#define USART_IT_PE                          ((uint16_t)0x0028)
+#define USART_IT_TXE                         ((uint16_t)0x0727)
+#define USART_IT_TC                          ((uint16_t)0x0626)
+#define USART_IT_RXNE                        ((uint16_t)0x0525)
+#define USART_IT_IDLE                        ((uint16_t)0x0424)
+#define USART_IT_LBD                         ((uint16_t)0x0846)
+#define USART_IT_CTS                         ((uint16_t)0x096A)
+#define USART_IT_ERR                         ((uint16_t)0x0060)
+#define USART_IT_ORE                         ((uint16_t)0x0360)
+#define USART_IT_NE                          ((uint16_t)0x0260)
+#define USART_IT_FE                          ((uint16_t)0x0160)
+#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+                               ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+                               ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+                               ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR))
+#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \
+                            ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+                            ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \
+                            ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \
+                            ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE))
+#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \
+                               ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS))
+/**
+  * @}
+  */
+
+/** @defgroup USART_DMA_Requests 
+  * @{
+  */
+
+#define USART_DMAReq_Tx                      ((uint16_t)0x0080)
+#define USART_DMAReq_Rx                      ((uint16_t)0x0040)
+#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00))
+
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_WakeUp_methods
+  * @{
+  */
+
+#define USART_WakeUp_IdleLine                ((uint16_t)0x0000)
+#define USART_WakeUp_AddressMark             ((uint16_t)0x0800)
+#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \
+                                 ((WAKEUP) == USART_WakeUp_AddressMark))
+/**
+  * @}
+  */
+
+/** @defgroup USART_LIN_Break_Detection_Length 
+  * @{
+  */
+  
+#define USART_LINBreakDetectLength_10b      ((uint16_t)0x0000)
+#define USART_LINBreakDetectLength_11b      ((uint16_t)0x0020)
+#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \
+                               (((LENGTH) == USART_LINBreakDetectLength_10b) || \
+                                ((LENGTH) == USART_LINBreakDetectLength_11b))
+/**
+  * @}
+  */
+
+/** @defgroup USART_IrDA_Low_Power 
+  * @{
+  */
+
+#define USART_IrDAMode_LowPower              ((uint16_t)0x0004)
+#define USART_IrDAMode_Normal                ((uint16_t)0x0000)
+#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \
+                                  ((MODE) == USART_IrDAMode_Normal))
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Flags 
+  * @{
+  */
+
+#define USART_FLAG_CTS                       ((uint16_t)0x0200)
+#define USART_FLAG_LBD                       ((uint16_t)0x0100)
+#define USART_FLAG_TXE                       ((uint16_t)0x0080)
+#define USART_FLAG_TC                        ((uint16_t)0x0040)
+#define USART_FLAG_RXNE                      ((uint16_t)0x0020)
+#define USART_FLAG_IDLE                      ((uint16_t)0x0010)
+#define USART_FLAG_ORE                       ((uint16_t)0x0008)
+#define USART_FLAG_NE                        ((uint16_t)0x0004)
+#define USART_FLAG_FE                        ((uint16_t)0x0002)
+#define USART_FLAG_PE                        ((uint16_t)0x0001)
+#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \
+                             ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \
+                             ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \
+                             ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \
+                             ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE))
+                              
+#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00))
+#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(uint32_t*)&(PERIPH)) != UART4_BASE) &&\
+                                                  ((*(uint32_t*)&(PERIPH)) != UART5_BASE)) \
+                                                  || ((USART_FLAG) != USART_FLAG_CTS)) 
+#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21))
+#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
+#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF)
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Exported_Macros
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup USART_Exported_Functions
+  * @{
+  */
+
+void USART_DeInit(USART_TypeDef* USARTx);
+void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct);
+void USART_StructInit(USART_InitTypeDef* USART_InitStruct);
+void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct);
+void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState);
+void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState);
+void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address);
+void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp);
+void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength);
+void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SendData(USART_TypeDef* USARTx, uint16_t Data);
+uint16_t USART_ReceiveData(USART_TypeDef* USARTx);
+void USART_SendBreak(USART_TypeDef* USARTx);
+void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime);
+void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler);
+void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState);
+void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode);
+void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState);
+FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG);
+ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT);
+void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_USART_H */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_wwdg.h b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_wwdg.h
new file mode 100644
index 0000000000000000000000000000000000000000..cd573da4454f7dd2ffbf37eec1b63abfc2183fbf
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/inc/stm32f10x_wwdg.h
@@ -0,0 +1,115 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_wwdg.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file contains all the functions prototypes for the WWDG firmware
+  *          library.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_WWDG_H
+#define __STM32F10x_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup WWDG
+  * @{
+  */ 
+
+/** @defgroup WWDG_Exported_Types
+  * @{
+  */ 
+  
+/**
+  * @}
+  */ 
+
+/** @defgroup WWDG_Exported_Constants
+  * @{
+  */ 
+  
+/** @defgroup WWDG_Prescaler 
+  * @{
+  */ 
+  
+#define WWDG_Prescaler_1    ((uint32_t)0x00000000)
+#define WWDG_Prescaler_2    ((uint32_t)0x00000080)
+#define WWDG_Prescaler_4    ((uint32_t)0x00000100)
+#define WWDG_Prescaler_8    ((uint32_t)0x00000180)
+#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \
+                                      ((PRESCALER) == WWDG_Prescaler_2) || \
+                                      ((PRESCALER) == WWDG_Prescaler_4) || \
+                                      ((PRESCALER) == WWDG_Prescaler_8))
+#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F)
+#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F))
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup WWDG_Exported_Macros
+  * @{
+  */ 
+/**
+  * @}
+  */ 
+
+/** @defgroup WWDG_Exported_Functions
+  * @{
+  */ 
+  
+void WWDG_DeInit(void);
+void WWDG_SetPrescaler(uint32_t WWDG_Prescaler);
+void WWDG_SetWindowValue(uint8_t WindowValue);
+void WWDG_EnableIT(void);
+void WWDG_SetCounter(uint8_t Counter);
+void WWDG_Enable(uint8_t Counter);
+FlagStatus WWDG_GetFlagStatus(void);
+void WWDG_ClearFlag(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_WWDG_H */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/misc.c b/Program/XLLC/STM32F10x_FWLib/src/misc.c
new file mode 100644
index 0000000000000000000000000000000000000000..ec9165f71fdc71bbbead52b202c9df1d24650258
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/misc.c
@@ -0,0 +1,225 @@
+/**
+  ******************************************************************************
+  * @file    misc.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the miscellaneous firmware functions (add-on
+  *          to CMSIS functions).
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "misc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup MISC 
+  * @brief MISC driver modules
+  * @{
+  */
+
+/** @defgroup MISC_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup MISC_Private_Defines
+  * @{
+  */
+
+#define AIRCR_VECTKEY_MASK    ((uint32_t)0x05FA0000)
+/**
+  * @}
+  */
+
+/** @defgroup MISC_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup MISC_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup MISC_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup MISC_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Configures the priority grouping: pre-emption priority and subpriority.
+  * @param  NVIC_PriorityGroup: specifies the priority grouping bits length. 
+  *   This parameter can be one of the following values:
+  *     @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority
+  *                                4 bits for subpriority
+  *     @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority
+  *                                3 bits for subpriority
+  *     @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority
+  *                                2 bits for subpriority
+  *     @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority
+  *                                1 bits for subpriority
+  *     @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority
+  *                                0 bits for subpriority
+  * @retval None
+  */
+void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup));
+  
+  /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */
+  SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup;
+}
+
+/**
+  * @brief  Initializes the NVIC peripheral according to the specified
+  *         parameters in the NVIC_InitStruct.
+  * @param  NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains
+  *         the configuration information for the specified NVIC peripheral.
+  * @retval None
+  */
+void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct)
+{
+  uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F;
+  
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd));
+  assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority));  
+  assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority));
+    
+  if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE)
+  {
+    /* Compute the Corresponding IRQ Priority --------------------------------*/    
+    tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08;
+    tmppre = (0x4 - tmppriority);
+    tmpsub = tmpsub >> tmppriority;
+
+    tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre;
+    tmppriority |=  NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub;
+    tmppriority = tmppriority << 0x04;
+        
+    NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority;
+    
+    /* Enable the Selected IRQ Channels --------------------------------------*/
+    NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+      (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+  }
+  else
+  {
+    /* Disable the Selected IRQ Channels -------------------------------------*/
+    NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] =
+      (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F);
+  }
+}
+
+/**
+  * @brief  Sets the vector table location and Offset.
+  * @param  NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory.
+  *   This parameter can be one of the following values:
+  *     @arg NVIC_VectTab_RAM
+  *     @arg NVIC_VectTab_FLASH
+  * @param  Offset: Vector Table base offset field. This value must be a multiple 
+  *         of 0x200.
+  * @retval None
+  */
+void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset)
+{ 
+  /* Check the parameters */
+  assert_param(IS_NVIC_VECTTAB(NVIC_VectTab));
+  assert_param(IS_NVIC_OFFSET(Offset));  
+   
+  SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80);
+}
+
+/**
+  * @brief  Selects the condition for the system to enter low power mode.
+  * @param  LowPowerMode: Specifies the new mode for the system to enter low power mode.
+  *   This parameter can be one of the following values:
+  *     @arg NVIC_LP_SEVONPEND
+  *     @arg NVIC_LP_SLEEPDEEP
+  *     @arg NVIC_LP_SLEEPONEXIT
+  * @param  NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_LP(LowPowerMode));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));  
+  
+  if (NewState != DISABLE)
+  {
+    SCB->SCR |= LowPowerMode;
+  }
+  else
+  {
+    SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode);
+  }
+}
+
+/**
+  * @brief  Configures the SysTick clock source.
+  * @param  SysTick_CLKSource: specifies the SysTick clock source.
+  *   This parameter can be one of the following values:
+  *     @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source.
+  *     @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source.
+  * @retval None
+  */
+void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource));
+  if (SysTick_CLKSource == SysTick_CLKSource_HCLK)
+  {
+    SysTick->CTRL |= SysTick_CLKSource_HCLK;
+  }
+  else
+  {
+    SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8;
+  }
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_adc.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_adc.c
new file mode 100644
index 0000000000000000000000000000000000000000..916a096d4b74fa2d6c60d1e6fa53e27bfc426053
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_adc.c
@@ -0,0 +1,1307 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_adc.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the ADC firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_adc.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup ADC 
+  * @brief ADC driver modules
+  * @{
+  */
+
+/** @defgroup ADC_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Private_Defines
+  * @{
+  */
+
+/* ADC DISCNUM mask */
+#define CR1_DISCNUM_Reset           ((uint32_t)0xFFFF1FFF)
+
+/* ADC DISCEN mask */
+#define CR1_DISCEN_Set              ((uint32_t)0x00000800)
+#define CR1_DISCEN_Reset            ((uint32_t)0xFFFFF7FF)
+
+/* ADC JAUTO mask */
+#define CR1_JAUTO_Set               ((uint32_t)0x00000400)
+#define CR1_JAUTO_Reset             ((uint32_t)0xFFFFFBFF)
+
+/* ADC JDISCEN mask */
+#define CR1_JDISCEN_Set             ((uint32_t)0x00001000)
+#define CR1_JDISCEN_Reset           ((uint32_t)0xFFFFEFFF)
+
+/* ADC AWDCH mask */
+#define CR1_AWDCH_Reset             ((uint32_t)0xFFFFFFE0)
+
+/* ADC Analog watchdog enable mode mask */
+#define CR1_AWDMode_Reset           ((uint32_t)0xFF3FFDFF)
+
+/* CR1 register Mask */
+#define CR1_CLEAR_Mask              ((uint32_t)0xFFF0FEFF)
+
+/* ADC ADON mask */
+#define CR2_ADON_Set                ((uint32_t)0x00000001)
+#define CR2_ADON_Reset              ((uint32_t)0xFFFFFFFE)
+
+/* ADC DMA mask */
+#define CR2_DMA_Set                 ((uint32_t)0x00000100)
+#define CR2_DMA_Reset               ((uint32_t)0xFFFFFEFF)
+
+/* ADC RSTCAL mask */
+#define CR2_RSTCAL_Set              ((uint32_t)0x00000008)
+
+/* ADC CAL mask */
+#define CR2_CAL_Set                 ((uint32_t)0x00000004)
+
+/* ADC SWSTART mask */
+#define CR2_SWSTART_Set             ((uint32_t)0x00400000)
+
+/* ADC EXTTRIG mask */
+#define CR2_EXTTRIG_Set             ((uint32_t)0x00100000)
+#define CR2_EXTTRIG_Reset           ((uint32_t)0xFFEFFFFF)
+
+/* ADC Software start mask */
+#define CR2_EXTTRIG_SWSTART_Set     ((uint32_t)0x00500000)
+#define CR2_EXTTRIG_SWSTART_Reset   ((uint32_t)0xFFAFFFFF)
+
+/* ADC JEXTSEL mask */
+#define CR2_JEXTSEL_Reset           ((uint32_t)0xFFFF8FFF)
+
+/* ADC JEXTTRIG mask */
+#define CR2_JEXTTRIG_Set            ((uint32_t)0x00008000)
+#define CR2_JEXTTRIG_Reset          ((uint32_t)0xFFFF7FFF)
+
+/* ADC JSWSTART mask */
+#define CR2_JSWSTART_Set            ((uint32_t)0x00200000)
+
+/* ADC injected software start mask */
+#define CR2_JEXTTRIG_JSWSTART_Set   ((uint32_t)0x00208000)
+#define CR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF)
+
+/* ADC TSPD mask */
+#define CR2_TSVREFE_Set             ((uint32_t)0x00800000)
+#define CR2_TSVREFE_Reset           ((uint32_t)0xFF7FFFFF)
+
+/* CR2 register Mask */
+#define CR2_CLEAR_Mask              ((uint32_t)0xFFF1F7FD)
+
+/* ADC SQx mask */
+#define SQR3_SQ_Set                 ((uint32_t)0x0000001F)
+#define SQR2_SQ_Set                 ((uint32_t)0x0000001F)
+#define SQR1_SQ_Set                 ((uint32_t)0x0000001F)
+
+/* SQR1 register Mask */
+#define SQR1_CLEAR_Mask             ((uint32_t)0xFF0FFFFF)
+
+/* ADC JSQx mask */
+#define JSQR_JSQ_Set                ((uint32_t)0x0000001F)
+
+/* ADC JL mask */
+#define JSQR_JL_Set                 ((uint32_t)0x00300000)
+#define JSQR_JL_Reset               ((uint32_t)0xFFCFFFFF)
+
+/* ADC SMPx mask */
+#define SMPR1_SMP_Set               ((uint32_t)0x00000007)
+#define SMPR2_SMP_Set               ((uint32_t)0x00000007)
+
+/* ADC JDRx registers offset */
+#define JDR_Offset                  ((uint8_t)0x28)
+
+/* ADC1 DR register base address */
+#define DR_ADDRESS                  ((uint32_t)0x4001244C)
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup ADC_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the ADCx peripheral registers to their default reset values.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @retval None
+  */
+void ADC_DeInit(ADC_TypeDef* ADCx)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  
+  if (ADCx == ADC1)
+  {
+    /* Enable ADC1 reset state */
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE);
+    /* Release ADC1 from reset state */
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE);
+  }
+  else if (ADCx == ADC2)
+  {
+    /* Enable ADC2 reset state */
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE);
+    /* Release ADC2 from reset state */
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE);
+  }
+  else
+  {
+    if (ADCx == ADC3)
+    {
+      /* Enable ADC3 reset state */
+      RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE);
+      /* Release ADC3 from reset state */
+      RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE);
+    }
+  }
+}
+
+/**
+  * @brief  Initializes the ADCx peripheral according to the specified parameters
+  *         in the ADC_InitStruct.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains
+  *         the configuration information for the specified ADC peripheral.
+  * @retval None
+  */
+void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct)
+{
+  uint32_t tmpreg1 = 0;
+  uint8_t tmpreg2 = 0;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode));
+  assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode));
+  assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode));
+  assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv));   
+  assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); 
+  assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel));
+
+  /*---------------------------- ADCx CR1 Configuration -----------------*/
+  /* Get the ADCx CR1 value */
+  tmpreg1 = ADCx->CR1;
+  /* Clear DUALMOD and SCAN bits */
+  tmpreg1 &= CR1_CLEAR_Mask;
+  /* Configure ADCx: Dual mode and scan conversion mode */
+  /* Set DUALMOD bits according to ADC_Mode value */
+  /* Set SCAN bit according to ADC_ScanConvMode value */
+  tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8));
+  /* Write to ADCx CR1 */
+  ADCx->CR1 = tmpreg1;
+
+  /*---------------------------- ADCx CR2 Configuration -----------------*/
+  /* Get the ADCx CR2 value */
+  tmpreg1 = ADCx->CR2;
+  /* Clear CONT, ALIGN and EXTSEL bits */
+  tmpreg1 &= CR2_CLEAR_Mask;
+  /* Configure ADCx: external trigger event and continuous conversion mode */
+  /* Set ALIGN bit according to ADC_DataAlign value */
+  /* Set EXTSEL bits according to ADC_ExternalTrigConv value */
+  /* Set CONT bit according to ADC_ContinuousConvMode value */
+  tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv |
+            ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1));
+  /* Write to ADCx CR2 */
+  ADCx->CR2 = tmpreg1;
+
+  /*---------------------------- ADCx SQR1 Configuration -----------------*/
+  /* Get the ADCx SQR1 value */
+  tmpreg1 = ADCx->SQR1;
+  /* Clear L bits */
+  tmpreg1 &= SQR1_CLEAR_Mask;
+  /* Configure ADCx: regular channel sequence length */
+  /* Set L bits according to ADC_NbrOfChannel value */
+  tmpreg2 |= (uint8_t) (ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1);
+  tmpreg1 |= (uint32_t)tmpreg2 << 20;
+  /* Write to ADCx SQR1 */
+  ADCx->SQR1 = tmpreg1;
+}
+
+/**
+  * @brief  Fills each ADC_InitStruct member with its default value.
+  * @param  ADC_InitStruct : pointer to an ADC_InitTypeDef structure which will be initialized.
+  * @retval None
+  */
+void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct)
+{
+  /* Reset ADC init structure parameters values */
+  /* Initialize the ADC_Mode member */
+  ADC_InitStruct->ADC_Mode = ADC_Mode_Independent;
+  /* initialize the ADC_ScanConvMode member */
+  ADC_InitStruct->ADC_ScanConvMode = DISABLE;
+  /* Initialize the ADC_ContinuousConvMode member */
+  ADC_InitStruct->ADC_ContinuousConvMode = DISABLE;
+  /* Initialize the ADC_ExternalTrigConv member */
+  ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1;
+  /* Initialize the ADC_DataAlign member */
+  ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right;
+  /* Initialize the ADC_NbrOfChannel member */
+  ADC_InitStruct->ADC_NbrOfChannel = 1;
+}
+
+/**
+  * @brief  Enables or disables the specified ADC peripheral.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  NewState: new state of the ADCx peripheral.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Set the ADON bit to wake up the ADC from power down mode */
+    ADCx->CR2 |= CR2_ADON_Set;
+  }
+  else
+  {
+    /* Disable the selected ADC peripheral */
+    ADCx->CR2 &= CR2_ADON_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified ADC DMA request.
+  * @param  ADCx: where x can be 1 or 3 to select the ADC peripheral.
+  *   Note: ADC2 hasn't a DMA capability.
+  * @param  NewState: new state of the selected ADC DMA transfer.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_DMA_PERIPH(ADCx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected ADC DMA request */
+    ADCx->CR2 |= CR2_DMA_Set;
+  }
+  else
+  {
+    /* Disable the selected ADC DMA request */
+    ADCx->CR2 &= CR2_DMA_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified ADC interrupts.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_IT: specifies the ADC interrupt sources to be enabled or disabled. 
+  *   This parameter can be any combination of the following values:
+  *     @arg ADC_IT_EOC: End of conversion interrupt mask
+  *     @arg ADC_IT_AWD: Analog watchdog interrupt mask
+  *     @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+  * @param  NewState: new state of the specified ADC interrupts.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState)
+{
+  uint8_t itmask = 0;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  assert_param(IS_ADC_IT(ADC_IT));
+  /* Get the ADC IT index */
+  itmask = (uint8_t)ADC_IT;
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected ADC interrupts */
+    ADCx->CR1 |= itmask;
+  }
+  else
+  {
+    /* Disable the selected ADC interrupts */
+    ADCx->CR1 &= (~(uint32_t)itmask);
+  }
+}
+
+/**
+  * @brief  Resets the selected ADC calibration registers.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @retval None
+  */
+void ADC_ResetCalibration(ADC_TypeDef* ADCx)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  /* Resets the selected ADC calibration registers */  
+  ADCx->CR2 |= CR2_RSTCAL_Set;
+}
+
+/**
+  * @brief  Gets the selected ADC reset calibration registers status.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @retval The new state of ADC reset calibration registers (SET or RESET).
+  */
+FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  /* Check the status of RSTCAL bit */
+  if ((ADCx->CR2 & CR2_RSTCAL_Set) != (uint32_t)RESET)
+  {
+    /* RSTCAL bit is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* RSTCAL bit is reset */
+    bitstatus = RESET;
+  }
+  /* Return the RSTCAL bit status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Starts the selected ADC calibration process.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @retval None
+  */
+void ADC_StartCalibration(ADC_TypeDef* ADCx)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  /* Enable the selected ADC calibration process */  
+  ADCx->CR2 |= CR2_CAL_Set;
+}
+
+/**
+  * @brief  Gets the selected ADC calibration status.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @retval The new state of ADC calibration (SET or RESET).
+  */
+FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  /* Check the status of CAL bit */
+  if ((ADCx->CR2 & CR2_CAL_Set) != (uint32_t)RESET)
+  {
+    /* CAL bit is set: calibration on going */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* CAL bit is reset: end of calibration */
+    bitstatus = RESET;
+  }
+  /* Return the CAL bit status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Enables or disables the selected ADC software start conversion .
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  NewState: new state of the selected ADC software start conversion.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected ADC conversion on external event and start the selected
+       ADC conversion */
+    ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set;
+  }
+  else
+  {
+    /* Disable the selected ADC conversion on external event and stop the selected
+       ADC conversion */
+    ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset;
+  }
+}
+
+/**
+  * @brief  Gets the selected ADC Software start conversion Status.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @retval The new state of ADC software start conversion (SET or RESET).
+  */
+FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  /* Check the status of SWSTART bit */
+  if ((ADCx->CR2 & CR2_SWSTART_Set) != (uint32_t)RESET)
+  {
+    /* SWSTART bit is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* SWSTART bit is reset */
+    bitstatus = RESET;
+  }
+  /* Return the SWSTART bit status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Configures the discontinuous mode for the selected ADC regular
+  *         group channel.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  Number: specifies the discontinuous mode regular channel
+  *         count value. This number must be between 1 and 8.
+  * @retval None
+  */
+void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number)
+{
+  uint32_t tmpreg1 = 0;
+  uint32_t tmpreg2 = 0;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number));
+  /* Get the old register value */
+  tmpreg1 = ADCx->CR1;
+  /* Clear the old discontinuous mode channel count */
+  tmpreg1 &= CR1_DISCNUM_Reset;
+  /* Set the discontinuous mode channel count */
+  tmpreg2 = Number - 1;
+  tmpreg1 |= tmpreg2 << 13;
+  /* Store the new register value */
+  ADCx->CR1 = tmpreg1;
+}
+
+/**
+  * @brief  Enables or disables the discontinuous mode on regular group
+  *         channel for the specified ADC
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  NewState: new state of the selected ADC discontinuous mode
+  *         on regular group channel.
+  *         This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected ADC regular discontinuous mode */
+    ADCx->CR1 |= CR1_DISCEN_Set;
+  }
+  else
+  {
+    /* Disable the selected ADC regular discontinuous mode */
+    ADCx->CR1 &= CR1_DISCEN_Reset;
+  }
+}
+
+/**
+  * @brief  Configures for the selected ADC regular channel its corresponding
+  *         rank in the sequencer and its sample time.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_Channel: the ADC channel to configure. 
+  *   This parameter can be one of the following values:
+  *     @arg ADC_Channel_0: ADC Channel0 selected
+  *     @arg ADC_Channel_1: ADC Channel1 selected
+  *     @arg ADC_Channel_2: ADC Channel2 selected
+  *     @arg ADC_Channel_3: ADC Channel3 selected
+  *     @arg ADC_Channel_4: ADC Channel4 selected
+  *     @arg ADC_Channel_5: ADC Channel5 selected
+  *     @arg ADC_Channel_6: ADC Channel6 selected
+  *     @arg ADC_Channel_7: ADC Channel7 selected
+  *     @arg ADC_Channel_8: ADC Channel8 selected
+  *     @arg ADC_Channel_9: ADC Channel9 selected
+  *     @arg ADC_Channel_10: ADC Channel10 selected
+  *     @arg ADC_Channel_11: ADC Channel11 selected
+  *     @arg ADC_Channel_12: ADC Channel12 selected
+  *     @arg ADC_Channel_13: ADC Channel13 selected
+  *     @arg ADC_Channel_14: ADC Channel14 selected
+  *     @arg ADC_Channel_15: ADC Channel15 selected
+  *     @arg ADC_Channel_16: ADC Channel16 selected
+  *     @arg ADC_Channel_17: ADC Channel17 selected
+  * @param  Rank: The rank in the regular group sequencer. This parameter must be between 1 to 16.
+  * @param  ADC_SampleTime: The sample time value to be set for the selected channel. 
+  *   This parameter can be one of the following values:
+  *     @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles
+  *     @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles
+  *     @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles
+  *     @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles	
+  *     @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles	
+  *     @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles	
+  *     @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles	
+  *     @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles	
+  * @retval None
+  */
+void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
+{
+  uint32_t tmpreg1 = 0, tmpreg2 = 0;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_CHANNEL(ADC_Channel));
+  assert_param(IS_ADC_REGULAR_RANK(Rank));
+  assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime));
+  /* if ADC_Channel_10 ... ADC_Channel_17 is selected */
+  if (ADC_Channel > ADC_Channel_9)
+  {
+    /* Get the old register value */
+    tmpreg1 = ADCx->SMPR1;
+    /* Calculate the mask to clear */
+    tmpreg2 = SMPR1_SMP_Set << (3 * (ADC_Channel - 10));
+    /* Clear the old channel sample time */
+    tmpreg1 &= ~tmpreg2;
+    /* Calculate the mask to set */
+    tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10));
+    /* Set the new channel sample time */
+    tmpreg1 |= tmpreg2;
+    /* Store the new register value */
+    ADCx->SMPR1 = tmpreg1;
+  }
+  else /* ADC_Channel include in ADC_Channel_[0..9] */
+  {
+    /* Get the old register value */
+    tmpreg1 = ADCx->SMPR2;
+    /* Calculate the mask to clear */
+    tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel);
+    /* Clear the old channel sample time */
+    tmpreg1 &= ~tmpreg2;
+    /* Calculate the mask to set */
+    tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
+    /* Set the new channel sample time */
+    tmpreg1 |= tmpreg2;
+    /* Store the new register value */
+    ADCx->SMPR2 = tmpreg1;
+  }
+  /* For Rank 1 to 6 */
+  if (Rank < 7)
+  {
+    /* Get the old register value */
+    tmpreg1 = ADCx->SQR3;
+    /* Calculate the mask to clear */
+    tmpreg2 = SQR3_SQ_Set << (5 * (Rank - 1));
+    /* Clear the old SQx bits for the selected rank */
+    tmpreg1 &= ~tmpreg2;
+    /* Calculate the mask to set */
+    tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1));
+    /* Set the SQx bits for the selected rank */
+    tmpreg1 |= tmpreg2;
+    /* Store the new register value */
+    ADCx->SQR3 = tmpreg1;
+  }
+  /* For Rank 7 to 12 */
+  else if (Rank < 13)
+  {
+    /* Get the old register value */
+    tmpreg1 = ADCx->SQR2;
+    /* Calculate the mask to clear */
+    tmpreg2 = SQR2_SQ_Set << (5 * (Rank - 7));
+    /* Clear the old SQx bits for the selected rank */
+    tmpreg1 &= ~tmpreg2;
+    /* Calculate the mask to set */
+    tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7));
+    /* Set the SQx bits for the selected rank */
+    tmpreg1 |= tmpreg2;
+    /* Store the new register value */
+    ADCx->SQR2 = tmpreg1;
+  }
+  /* For Rank 13 to 16 */
+  else
+  {
+    /* Get the old register value */
+    tmpreg1 = ADCx->SQR1;
+    /* Calculate the mask to clear */
+    tmpreg2 = SQR1_SQ_Set << (5 * (Rank - 13));
+    /* Clear the old SQx bits for the selected rank */
+    tmpreg1 &= ~tmpreg2;
+    /* Calculate the mask to set */
+    tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13));
+    /* Set the SQx bits for the selected rank */
+    tmpreg1 |= tmpreg2;
+    /* Store the new register value */
+    ADCx->SQR1 = tmpreg1;
+  }
+}
+
+/**
+  * @brief  Enables or disables the ADCx conversion through external trigger.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  NewState: new state of the selected ADC external trigger start of conversion.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected ADC conversion on external event */
+    ADCx->CR2 |= CR2_EXTTRIG_Set;
+  }
+  else
+  {
+    /* Disable the selected ADC conversion on external event */
+    ADCx->CR2 &= CR2_EXTTRIG_Reset;
+  }
+}
+
+/**
+  * @brief  Returns the last ADCx conversion result data for regular channel.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @retval The Data conversion value.
+  */
+uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  /* Return the selected ADC conversion value */
+  return (uint16_t) ADCx->DR;
+}
+
+/**
+  * @brief  Returns the last ADC1 and ADC2 conversion result data in dual mode.
+  * @retval The Data conversion value.
+  */
+uint32_t ADC_GetDualModeConversionValue(void)
+{
+  /* Return the dual mode conversion value */
+  return (*(__IO uint32_t *) DR_ADDRESS);
+}
+
+/**
+  * @brief  Enables or disables the selected ADC automatic injected group
+  *         conversion after regular one.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  NewState: new state of the selected ADC auto injected conversion
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected ADC automatic injected group conversion */
+    ADCx->CR1 |= CR1_JAUTO_Set;
+  }
+  else
+  {
+    /* Disable the selected ADC automatic injected group conversion */
+    ADCx->CR1 &= CR1_JAUTO_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the discontinuous mode for injected group
+  *         channel for the specified ADC
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  NewState: new state of the selected ADC discontinuous mode
+  *         on injected group channel.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected ADC injected discontinuous mode */
+    ADCx->CR1 |= CR1_JDISCEN_Set;
+  }
+  else
+  {
+    /* Disable the selected ADC injected discontinuous mode */
+    ADCx->CR1 &= CR1_JDISCEN_Reset;
+  }
+}
+
+/**
+  * @brief  Configures the ADCx external trigger for injected channels conversion.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion. 
+  *   This parameter can be one of the following values:
+  *     @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3)
+  *     @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3)
+  *     @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2)
+  *     @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2)
+  *     @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2)
+  *     @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2)
+  *     @arg ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8
+  *                                                       capture compare4 event selected (for ADC1 and ADC2)                       
+  *     @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only)
+  *     @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only)                         
+  *     @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only)
+  *     @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only)                         
+  *     @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only)                        
+  *     @arg ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not
+  *                                          by external trigger (for ADC1, ADC2 and ADC3)
+  * @retval None
+  */
+void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv));
+  /* Get the old register value */
+  tmpreg = ADCx->CR2;
+  /* Clear the old external event selection for injected group */
+  tmpreg &= CR2_JEXTSEL_Reset;
+  /* Set the external event selection for injected group */
+  tmpreg |= ADC_ExternalTrigInjecConv;
+  /* Store the new register value */
+  ADCx->CR2 = tmpreg;
+}
+
+/**
+  * @brief  Enables or disables the ADCx injected channels conversion through
+  *         external trigger
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  NewState: new state of the selected ADC external trigger start of
+  *         injected conversion.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected ADC external event selection for injected group */
+    ADCx->CR2 |= CR2_JEXTTRIG_Set;
+  }
+  else
+  {
+    /* Disable the selected ADC external event selection for injected group */
+    ADCx->CR2 &= CR2_JEXTTRIG_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the selected ADC start of the injected 
+  *         channels conversion.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  NewState: new state of the selected ADC software start injected conversion.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected ADC conversion for injected group on external event and start the selected
+       ADC injected conversion */
+    ADCx->CR2 |= CR2_JEXTTRIG_JSWSTART_Set;
+  }
+  else
+  {
+    /* Disable the selected ADC conversion on external event for injected group and stop the selected
+       ADC injected conversion */
+    ADCx->CR2 &= CR2_JEXTTRIG_JSWSTART_Reset;
+  }
+}
+
+/**
+  * @brief  Gets the selected ADC Software start injected conversion Status.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @retval The new state of ADC software start injected conversion (SET or RESET).
+  */
+FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  /* Check the status of JSWSTART bit */
+  if ((ADCx->CR2 & CR2_JSWSTART_Set) != (uint32_t)RESET)
+  {
+    /* JSWSTART bit is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* JSWSTART bit is reset */
+    bitstatus = RESET;
+  }
+  /* Return the JSWSTART bit status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Configures for the selected ADC injected channel its corresponding
+  *         rank in the sequencer and its sample time.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_Channel: the ADC channel to configure. 
+  *   This parameter can be one of the following values:
+  *     @arg ADC_Channel_0: ADC Channel0 selected
+  *     @arg ADC_Channel_1: ADC Channel1 selected
+  *     @arg ADC_Channel_2: ADC Channel2 selected
+  *     @arg ADC_Channel_3: ADC Channel3 selected
+  *     @arg ADC_Channel_4: ADC Channel4 selected
+  *     @arg ADC_Channel_5: ADC Channel5 selected
+  *     @arg ADC_Channel_6: ADC Channel6 selected
+  *     @arg ADC_Channel_7: ADC Channel7 selected
+  *     @arg ADC_Channel_8: ADC Channel8 selected
+  *     @arg ADC_Channel_9: ADC Channel9 selected
+  *     @arg ADC_Channel_10: ADC Channel10 selected
+  *     @arg ADC_Channel_11: ADC Channel11 selected
+  *     @arg ADC_Channel_12: ADC Channel12 selected
+  *     @arg ADC_Channel_13: ADC Channel13 selected
+  *     @arg ADC_Channel_14: ADC Channel14 selected
+  *     @arg ADC_Channel_15: ADC Channel15 selected
+  *     @arg ADC_Channel_16: ADC Channel16 selected
+  *     @arg ADC_Channel_17: ADC Channel17 selected
+  * @param  Rank: The rank in the injected group sequencer. This parameter must be between 1 and 4.
+  * @param  ADC_SampleTime: The sample time value to be set for the selected channel. 
+  *   This parameter can be one of the following values:
+  *     @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles
+  *     @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles
+  *     @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles
+  *     @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles	
+  *     @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles	
+  *     @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles	
+  *     @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles	
+  *     @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles	
+  * @retval None
+  */
+void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
+{
+  uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_CHANNEL(ADC_Channel));
+  assert_param(IS_ADC_INJECTED_RANK(Rank));
+  assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime));
+  /* if ADC_Channel_10 ... ADC_Channel_17 is selected */
+  if (ADC_Channel > ADC_Channel_9)
+  {
+    /* Get the old register value */
+    tmpreg1 = ADCx->SMPR1;
+    /* Calculate the mask to clear */
+    tmpreg2 = SMPR1_SMP_Set << (3*(ADC_Channel - 10));
+    /* Clear the old channel sample time */
+    tmpreg1 &= ~tmpreg2;
+    /* Calculate the mask to set */
+    tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10));
+    /* Set the new channel sample time */
+    tmpreg1 |= tmpreg2;
+    /* Store the new register value */
+    ADCx->SMPR1 = tmpreg1;
+  }
+  else /* ADC_Channel include in ADC_Channel_[0..9] */
+  {
+    /* Get the old register value */
+    tmpreg1 = ADCx->SMPR2;
+    /* Calculate the mask to clear */
+    tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel);
+    /* Clear the old channel sample time */
+    tmpreg1 &= ~tmpreg2;
+    /* Calculate the mask to set */
+    tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel);
+    /* Set the new channel sample time */
+    tmpreg1 |= tmpreg2;
+    /* Store the new register value */
+    ADCx->SMPR2 = tmpreg1;
+  }
+  /* Rank configuration */
+  /* Get the old register value */
+  tmpreg1 = ADCx->JSQR;
+  /* Get JL value: Number = JL+1 */
+  tmpreg3 =  (tmpreg1 & JSQR_JL_Set)>> 20;
+  /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */
+  tmpreg2 = JSQR_JSQ_Set << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
+  /* Clear the old JSQx bits for the selected rank */
+  tmpreg1 &= ~tmpreg2;
+  /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */
+  tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1)));
+  /* Set the JSQx bits for the selected rank */
+  tmpreg1 |= tmpreg2;
+  /* Store the new register value */
+  ADCx->JSQR = tmpreg1;
+}
+
+/**
+  * @brief  Configures the sequencer length for injected channels
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  Length: The sequencer length. 
+  *   This parameter must be a number between 1 to 4.
+  * @retval None
+  */
+void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length)
+{
+  uint32_t tmpreg1 = 0;
+  uint32_t tmpreg2 = 0;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_INJECTED_LENGTH(Length));
+  
+  /* Get the old register value */
+  tmpreg1 = ADCx->JSQR;
+  /* Clear the old injected sequnence lenght JL bits */
+  tmpreg1 &= JSQR_JL_Reset;
+  /* Set the injected sequnence lenght JL bits */
+  tmpreg2 = Length - 1; 
+  tmpreg1 |= tmpreg2 << 20;
+  /* Store the new register value */
+  ADCx->JSQR = tmpreg1;
+}
+
+/**
+  * @brief  Set the injected channels conversion value offset
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_InjectedChannel: the ADC injected channel to set its offset. 
+  *   This parameter can be one of the following values:
+  *     @arg ADC_InjectedChannel_1: Injected Channel1 selected
+  *     @arg ADC_InjectedChannel_2: Injected Channel2 selected
+  *     @arg ADC_InjectedChannel_3: Injected Channel3 selected
+  *     @arg ADC_InjectedChannel_4: Injected Channel4 selected
+  * @param  Offset: the offset value for the selected ADC injected channel
+  *   This parameter must be a 12bit value.
+  * @retval None
+  */
+void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset)
+{
+  __IO uint32_t tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel));
+  assert_param(IS_ADC_OFFSET(Offset));  
+  
+  tmp = (uint32_t)ADCx;
+  tmp += ADC_InjectedChannel;
+  
+  /* Set the selected injected channel data offset */
+  *(__IO uint32_t *) tmp = (uint32_t)Offset;
+}
+
+/**
+  * @brief  Returns the ADC injected channel conversion result
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_InjectedChannel: the converted ADC injected channel.
+  *   This parameter can be one of the following values:
+  *     @arg ADC_InjectedChannel_1: Injected Channel1 selected
+  *     @arg ADC_InjectedChannel_2: Injected Channel2 selected
+  *     @arg ADC_InjectedChannel_3: Injected Channel3 selected
+  *     @arg ADC_InjectedChannel_4: Injected Channel4 selected
+  * @retval The Data conversion value.
+  */
+uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel)
+{
+  __IO uint32_t tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel));
+
+  tmp = (uint32_t)ADCx;
+  tmp += ADC_InjectedChannel + JDR_Offset;
+  
+  /* Returns the selected injected channel conversion data value */
+  return (uint16_t) (*(__IO uint32_t*)  tmp);   
+}
+
+/**
+  * @brief  Enables or disables the analog watchdog on single/all regular
+  *         or injected channels
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_AnalogWatchdog: the ADC analog watchdog configuration.
+  *   This parameter can be one of the following values:
+  *     @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel
+  *     @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel
+  *     @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel
+  *     @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on  all regular channel
+  *     @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on  all injected channel
+  *     @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels
+  *     @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog
+  * @retval None	  
+  */
+void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog));
+  /* Get the old register value */
+  tmpreg = ADCx->CR1;
+  /* Clear AWDEN, AWDENJ and AWDSGL bits */
+  tmpreg &= CR1_AWDMode_Reset;
+  /* Set the analog watchdog enable mode */
+  tmpreg |= ADC_AnalogWatchdog;
+  /* Store the new register value */
+  ADCx->CR1 = tmpreg;
+}
+
+/**
+  * @brief  Configures the high and low thresholds of the analog watchdog.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  HighThreshold: the ADC analog watchdog High threshold value.
+  *   This parameter must be a 12bit value.
+  * @param  LowThreshold: the ADC analog watchdog Low threshold value.
+  *   This parameter must be a 12bit value.
+  * @retval None
+  */
+void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold,
+                                        uint16_t LowThreshold)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_THRESHOLD(HighThreshold));
+  assert_param(IS_ADC_THRESHOLD(LowThreshold));
+  /* Set the ADCx high threshold */
+  ADCx->HTR = HighThreshold;
+  /* Set the ADCx low threshold */
+  ADCx->LTR = LowThreshold;
+}
+
+/**
+  * @brief  Configures the analog watchdog guarded single channel
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_Channel: the ADC channel to configure for the analog watchdog. 
+  *   This parameter can be one of the following values:
+  *     @arg ADC_Channel_0: ADC Channel0 selected
+  *     @arg ADC_Channel_1: ADC Channel1 selected
+  *     @arg ADC_Channel_2: ADC Channel2 selected
+  *     @arg ADC_Channel_3: ADC Channel3 selected
+  *     @arg ADC_Channel_4: ADC Channel4 selected
+  *     @arg ADC_Channel_5: ADC Channel5 selected
+  *     @arg ADC_Channel_6: ADC Channel6 selected
+  *     @arg ADC_Channel_7: ADC Channel7 selected
+  *     @arg ADC_Channel_8: ADC Channel8 selected
+  *     @arg ADC_Channel_9: ADC Channel9 selected
+  *     @arg ADC_Channel_10: ADC Channel10 selected
+  *     @arg ADC_Channel_11: ADC Channel11 selected
+  *     @arg ADC_Channel_12: ADC Channel12 selected
+  *     @arg ADC_Channel_13: ADC Channel13 selected
+  *     @arg ADC_Channel_14: ADC Channel14 selected
+  *     @arg ADC_Channel_15: ADC Channel15 selected
+  *     @arg ADC_Channel_16: ADC Channel16 selected
+  *     @arg ADC_Channel_17: ADC Channel17 selected
+  * @retval None
+  */
+void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_CHANNEL(ADC_Channel));
+  /* Get the old register value */
+  tmpreg = ADCx->CR1;
+  /* Clear the Analog watchdog channel select bits */
+  tmpreg &= CR1_AWDCH_Reset;
+  /* Set the Analog watchdog channel */
+  tmpreg |= ADC_Channel;
+  /* Store the new register value */
+  ADCx->CR1 = tmpreg;
+}
+
+/**
+  * @brief  Enables or disables the temperature sensor and Vrefint channel.
+  * @param  NewState: new state of the temperature sensor.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void ADC_TempSensorVrefintCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the temperature sensor and Vrefint channel*/
+    ADC1->CR2 |= CR2_TSVREFE_Set;
+  }
+  else
+  {
+    /* Disable the temperature sensor and Vrefint channel*/
+    ADC1->CR2 &= CR2_TSVREFE_Reset;
+  }
+}
+
+/**
+  * @brief  Checks whether the specified ADC flag is set or not.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_FLAG: specifies the flag to check. 
+  *   This parameter can be one of the following values:
+  *     @arg ADC_FLAG_AWD: Analog watchdog flag
+  *     @arg ADC_FLAG_EOC: End of conversion flag
+  *     @arg ADC_FLAG_JEOC: End of injected group conversion flag
+  *     @arg ADC_FLAG_JSTRT: Start of injected group conversion flag
+  *     @arg ADC_FLAG_STRT: Start of regular group conversion flag
+  * @retval The new state of ADC_FLAG (SET or RESET).
+  */
+FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_GET_FLAG(ADC_FLAG));
+  /* Check the status of the specified ADC flag */
+  if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET)
+  {
+    /* ADC_FLAG is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* ADC_FLAG is reset */
+    bitstatus = RESET;
+  }
+  /* Return the ADC_FLAG status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the ADCx's pending flags.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_FLAG: specifies the flag to clear. 
+  *   This parameter can be any combination of the following values:
+  *     @arg ADC_FLAG_AWD: Analog watchdog flag
+  *     @arg ADC_FLAG_EOC: End of conversion flag
+  *     @arg ADC_FLAG_JEOC: End of injected group conversion flag
+  *     @arg ADC_FLAG_JSTRT: Start of injected group conversion flag
+  *     @arg ADC_FLAG_STRT: Start of regular group conversion flag
+  * @retval None
+  */
+void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG)
+{
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG));
+  /* Clear the selected ADC flags */
+  ADCx->SR = ~(uint32_t)ADC_FLAG;
+}
+
+/**
+  * @brief  Checks whether the specified ADC interrupt has occurred or not.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_IT: specifies the ADC interrupt source to check. 
+  *   This parameter can be one of the following values:
+  *     @arg ADC_IT_EOC: End of conversion interrupt mask
+  *     @arg ADC_IT_AWD: Analog watchdog interrupt mask
+  *     @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+  * @retval The new state of ADC_IT (SET or RESET).
+  */
+ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT)
+{
+  ITStatus bitstatus = RESET;
+  uint32_t itmask = 0, enablestatus = 0;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_GET_IT(ADC_IT));
+  /* Get the ADC IT index */
+  itmask = ADC_IT >> 8;
+  /* Get the ADC_IT enable bit status */
+  enablestatus = (ADCx->CR1 & (uint8_t)ADC_IT) ;
+  /* Check the status of the specified ADC interrupt */
+  if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus)
+  {
+    /* ADC_IT is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* ADC_IT is reset */
+    bitstatus = RESET;
+  }
+  /* Return the ADC_IT status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the ADCx's interrupt pending bits.
+  * @param  ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.
+  * @param  ADC_IT: specifies the ADC interrupt pending bit to clear.
+  *   This parameter can be any combination of the following values:
+  *     @arg ADC_IT_EOC: End of conversion interrupt mask
+  *     @arg ADC_IT_AWD: Analog watchdog interrupt mask
+  *     @arg ADC_IT_JEOC: End of injected conversion interrupt mask
+  * @retval None
+  */
+void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT)
+{
+  uint8_t itmask = 0;
+  /* Check the parameters */
+  assert_param(IS_ADC_ALL_PERIPH(ADCx));
+  assert_param(IS_ADC_IT(ADC_IT));
+  /* Get the ADC IT index */
+  itmask = (uint8_t)(ADC_IT >> 8);
+  /* Clear the selected ADC interrupt pending bits */
+  ADCx->SR = ~(uint32_t)itmask;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_bkp.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_bkp.c
new file mode 100644
index 0000000000000000000000000000000000000000..3004b9ef806149d5146fb86c0b43cb9e026db10a
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_bkp.c
@@ -0,0 +1,308 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_bkp.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the BKP firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup BKP 
+  * @brief BKP driver modules
+  * @{
+  */
+
+/** @defgroup BKP_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup BKP_Private_Defines
+  * @{
+  */
+
+/* ------------ BKP registers bit address in the alias region --------------- */
+#define BKP_OFFSET        (BKP_BASE - PERIPH_BASE)
+
+/* --- CR Register ----*/
+
+/* Alias word address of TPAL bit */
+#define CR_OFFSET         (BKP_OFFSET + 0x30)
+#define TPAL_BitNumber    0x01
+#define CR_TPAL_BB        (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4))
+
+/* Alias word address of TPE bit */
+#define TPE_BitNumber     0x00
+#define CR_TPE_BB         (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of TPIE bit */
+#define CSR_OFFSET        (BKP_OFFSET + 0x34)
+#define TPIE_BitNumber    0x02
+#define CSR_TPIE_BB       (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4))
+
+/* Alias word address of TIF bit */
+#define TIF_BitNumber     0x09
+#define CSR_TIF_BB        (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4))
+
+/* Alias word address of TEF bit */
+#define TEF_BitNumber     0x08
+#define CSR_TEF_BB        (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4))
+
+/* ---------------------- BKP registers bit mask ------------------------ */
+
+/* RTCCR register bit mask */
+#define RTCCR_CAL_MASK    ((uint16_t)0xFF80)
+#define RTCCR_MASK        ((uint16_t)0xFC7F)
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup BKP_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup BKP_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup BKP_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup BKP_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the BKP peripheral registers to their default reset values.
+  * @param  None
+  * @retval None
+  */
+void BKP_DeInit(void)
+{
+  RCC_BackupResetCmd(ENABLE);
+  RCC_BackupResetCmd(DISABLE);
+}
+
+/**
+  * @brief  Configures the Tamper Pin active level.
+  * @param  BKP_TamperPinLevel: specifies the Tamper Pin active level.
+  *   This parameter can be one of the following values:
+  *     @arg BKP_TamperPinLevel_High: Tamper pin active on high level
+  *     @arg BKP_TamperPinLevel_Low: Tamper pin active on low level
+  * @retval None
+  */
+void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel)
+{
+  /* Check the parameters */
+  assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel));
+  *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel;
+}
+
+/**
+  * @brief  Enables or disables the Tamper Pin activation.
+  * @param  NewState: new state of the Tamper Pin activation.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void BKP_TamperPinCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Enables or disables the Tamper Pin Interrupt.
+  * @param  NewState: new state of the Tamper Pin Interrupt.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void BKP_ITConfig(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Select the RTC output source to output on the Tamper pin.
+  * @param  BKP_RTCOutputSource: specifies the RTC output source.
+  *   This parameter can be one of the following values:
+  *     @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin.
+  *     @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency
+  *                                          divided by 64 on the Tamper pin.
+  *     @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on
+  *                                     the Tamper pin.
+  *     @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on
+  *                                      the Tamper pin.  
+  * @retval None
+  */
+void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource)
+{
+  uint16_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource));
+  tmpreg = BKP->RTCCR;
+  /* Clear CCO, ASOE and ASOS bits */
+  tmpreg &= RTCCR_MASK;
+  
+  /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */
+  tmpreg |= BKP_RTCOutputSource;
+  /* Store the new value */
+  BKP->RTCCR = tmpreg;
+}
+
+/**
+  * @brief  Sets RTC Clock Calibration value.
+  * @param  CalibrationValue: specifies the RTC Clock Calibration value.
+  *   This parameter must be a number between 0 and 0x7F.
+  * @retval None
+  */
+void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue)
+{
+  uint16_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue));
+  tmpreg = BKP->RTCCR;
+  /* Clear CAL[6:0] bits */
+  tmpreg &= RTCCR_CAL_MASK;
+  /* Set CAL[6:0] bits according to CalibrationValue value */
+  tmpreg |= CalibrationValue;
+  /* Store the new value */
+  BKP->RTCCR = tmpreg;
+}
+
+/**
+  * @brief  Writes user data to the specified Data Backup Register.
+  * @param  BKP_DR: specifies the Data Backup Register.
+  *   This parameter can be BKP_DRx where x:[1, 42]
+  * @param  Data: data to write
+  * @retval None
+  */
+void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data)
+{
+  __IO uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_BKP_DR(BKP_DR));
+
+  tmp = (uint32_t)BKP_BASE; 
+  tmp += BKP_DR;
+
+  *(__IO uint32_t *) tmp = Data;
+}
+
+/**
+  * @brief  Reads data from the specified Data Backup Register.
+  * @param  BKP_DR: specifies the Data Backup Register.
+  *   This parameter can be BKP_DRx where x:[1, 42]
+  * @retval The content of the specified Data Backup Register
+  */
+uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR)
+{
+  __IO uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_BKP_DR(BKP_DR));
+
+  tmp = (uint32_t)BKP_BASE; 
+  tmp += BKP_DR;
+
+  return (*(__IO uint16_t *) tmp);
+}
+
+/**
+  * @brief  Checks whether the Tamper Pin Event flag is set or not.
+  * @param  None
+  * @retval The new state of the Tamper Pin Event flag (SET or RESET).
+  */
+FlagStatus BKP_GetFlagStatus(void)
+{
+  return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB);
+}
+
+/**
+  * @brief  Clears Tamper Pin Event pending flag.
+  * @param  None
+  * @retval None
+  */
+void BKP_ClearFlag(void)
+{
+  /* Set CTE bit to clear Tamper Pin Event flag */
+  BKP->CSR |= BKP_CSR_CTE;
+}
+
+/**
+  * @brief  Checks whether the Tamper Pin Interrupt has occurred or not.
+  * @param  None
+  * @retval The new state of the Tamper Pin Interrupt (SET or RESET).
+  */
+ITStatus BKP_GetITStatus(void)
+{
+  return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB);
+}
+
+/**
+  * @brief  Clears Tamper Pin Interrupt pending bit.
+  * @param  None
+  * @retval None
+  */
+void BKP_ClearITPendingBit(void)
+{
+  /* Set CTI bit to clear Tamper Pin Interrupt pending bit */
+  BKP->CSR |= BKP_CSR_CTI;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_can.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_can.c
new file mode 100644
index 0000000000000000000000000000000000000000..607d6924f7c2715b5f7aa3a854e891d4afde5953
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_can.c
@@ -0,0 +1,1415 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_can.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the CAN firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_can.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup CAN 
+  * @brief CAN driver modules
+  * @{
+  */ 
+
+/** @defgroup CAN_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Private_Defines
+  * @{
+  */
+
+/* CAN Master Control Register bits */
+
+#define MCR_DBF      ((uint32_t)0x00010000) /* software master reset */
+
+/* CAN Mailbox Transmit Request */
+#define TMIDxR_TXRQ  ((uint32_t)0x00000001) /* Transmit mailbox request */
+
+/* CAN Filter Master Register bits */
+#define FMR_FINIT    ((uint32_t)0x00000001) /* Filter init mode */
+
+/* Time out for INAK bit */
+#define INAK_TIMEOUT        ((uint32_t)0x0000FFFF)
+/* Time out for SLAK bit */
+#define SLAK_TIMEOUT        ((uint32_t)0x0000FFFF)
+
+
+
+/* Flags in TSR register */
+#define CAN_FLAGS_TSR              ((uint32_t)0x08000000) 
+/* Flags in RF1R register */
+#define CAN_FLAGS_RF1R             ((uint32_t)0x04000000) 
+/* Flags in RF0R register */
+#define CAN_FLAGS_RF0R             ((uint32_t)0x02000000) 
+/* Flags in MSR register */
+#define CAN_FLAGS_MSR              ((uint32_t)0x01000000) 
+/* Flags in ESR register */
+#define CAN_FLAGS_ESR              ((uint32_t)0x00F00000) 
+
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0                   ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1                   ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2                   ((uint8_t)0x02) 
+
+
+
+#define CAN_MODE_MASK              ((uint32_t) 0x00000003)
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Private_FunctionPrototypes
+  * @{
+  */
+
+static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit);
+
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the CAN peripheral registers to their default reset values.
+  * @param  CANx: where x can be 1 or 2 to select the CAN peripheral.
+  * @retval None.
+  */
+void CAN_DeInit(CAN_TypeDef* CANx)
+{
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+ 
+  if (CANx == CAN1)
+  {
+    /* Enable CAN1 reset state */
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, ENABLE);
+    /* Release CAN1 from reset state */
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, DISABLE);
+  }
+  else
+  {  
+    /* Enable CAN2 reset state */
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, ENABLE);
+    /* Release CAN2 from reset state */
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, DISABLE);
+  }
+}
+
+/**
+  * @brief  Initializes the CAN peripheral according to the specified
+  *         parameters in the CAN_InitStruct.
+  * @param  CANx:           where x can be 1 or 2 to to select the CAN 
+  *                         peripheral.
+  * @param  CAN_InitStruct: pointer to a CAN_InitTypeDef structure that
+  *                         contains the configuration information for the 
+  *                         CAN peripheral.
+  * @retval Constant indicates initialization succeed which will be 
+  *         CAN_InitStatus_Failed or CAN_InitStatus_Success.
+  */
+uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct)
+{
+  uint8_t InitStatus = CAN_InitStatus_Failed;
+  uint32_t wait_ack = 0x00000000;
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM));
+  assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM));
+  assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM));
+  assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART));
+  assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM));
+  assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP));
+  assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode));
+  assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW));
+  assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1));
+  assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2));
+  assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler));
+
+  /* Exit from sleep mode */
+  CANx->MCR &= (~(uint32_t)CAN_MCR_SLEEP);
+
+  /* Request initialisation */
+  CANx->MCR |= CAN_MCR_INRQ ;
+
+  /* Wait the acknowledge */
+  while (((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT))
+  {
+    wait_ack++;
+  }
+
+  /* Check acknowledge */
+  if ((CANx->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
+  {
+    InitStatus = CAN_InitStatus_Failed;
+  }
+  else 
+  {
+    /* Set the time triggered communication mode */
+    if (CAN_InitStruct->CAN_TTCM == ENABLE)
+    {
+      CANx->MCR |= CAN_MCR_TTCM;
+    }
+    else
+    {
+      CANx->MCR &= ~(uint32_t)CAN_MCR_TTCM;
+    }
+
+    /* Set the automatic bus-off management */
+    if (CAN_InitStruct->CAN_ABOM == ENABLE)
+    {
+      CANx->MCR |= CAN_MCR_ABOM;
+    }
+    else
+    {
+      CANx->MCR &= ~(uint32_t)CAN_MCR_ABOM;
+    }
+
+    /* Set the automatic wake-up mode */
+    if (CAN_InitStruct->CAN_AWUM == ENABLE)
+    {
+      CANx->MCR |= CAN_MCR_AWUM;
+    }
+    else
+    {
+      CANx->MCR &= ~(uint32_t)CAN_MCR_AWUM;
+    }
+
+    /* Set the no automatic retransmission */
+    if (CAN_InitStruct->CAN_NART == ENABLE)
+    {
+      CANx->MCR |= CAN_MCR_NART;
+    }
+    else
+    {
+      CANx->MCR &= ~(uint32_t)CAN_MCR_NART;
+    }
+
+    /* Set the receive FIFO locked mode */
+    if (CAN_InitStruct->CAN_RFLM == ENABLE)
+    {
+      CANx->MCR |= CAN_MCR_RFLM;
+    }
+    else
+    {
+      CANx->MCR &= ~(uint32_t)CAN_MCR_RFLM;
+    }
+
+    /* Set the transmit FIFO priority */
+    if (CAN_InitStruct->CAN_TXFP == ENABLE)
+    {
+      CANx->MCR |= CAN_MCR_TXFP;
+    }
+    else
+    {
+      CANx->MCR &= ~(uint32_t)CAN_MCR_TXFP;
+    }
+
+    /* Set the bit timing register */
+    CANx->BTR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | \
+                ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | \
+                ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | \
+                ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | \
+               ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1);
+
+    /* Request leave initialisation */
+    CANx->MCR &= ~(uint32_t)CAN_MCR_INRQ;
+
+   /* Wait the acknowledge */
+   wait_ack = 0;
+
+   while (((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) && (wait_ack != INAK_TIMEOUT))
+   {
+     wait_ack++;
+   }
+
+    /* ...and check acknowledged */
+    if ((CANx->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
+    {
+      InitStatus = CAN_InitStatus_Failed;
+    }
+    else
+    {
+      InitStatus = CAN_InitStatus_Success ;
+    }
+  }
+
+  /* At this step, return the status of initialization */
+  return InitStatus;
+}
+
+/**
+  * @brief  Initializes the CAN peripheral according to the specified
+  *         parameters in the CAN_FilterInitStruct.
+  * @param  CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef
+  *                               structure that contains the configuration 
+  *                               information.
+  * @retval None.
+  */
+void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct)
+{
+  uint32_t filter_number_bit_pos = 0;
+  /* Check the parameters */
+  assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber));
+  assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode));
+  assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale));
+  assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment));
+  assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation));
+
+  filter_number_bit_pos = ((uint32_t)1) << CAN_FilterInitStruct->CAN_FilterNumber;
+
+  /* Initialisation mode for the filter */
+  CAN1->FMR |= FMR_FINIT;
+
+  /* Filter Deactivation */
+  CAN1->FA1R &= ~(uint32_t)filter_number_bit_pos;
+
+  /* Filter Scale */
+  if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit)
+  {
+    /* 16-bit scale for the filter */
+    CAN1->FS1R &= ~(uint32_t)filter_number_bit_pos;
+
+    /* First 16-bit identifier and First 16-bit mask */
+    /* Or First 16-bit identifier and Second 16-bit identifier */
+    CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = 
+    ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) |
+        (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow);
+
+    /* Second 16-bit identifier and Second 16-bit mask */
+    /* Or Third 16-bit identifier and Fourth 16-bit identifier */
+    CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = 
+    ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) |
+        (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh);
+  }
+
+  if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit)
+  {
+    /* 32-bit scale for the filter */
+    CAN1->FS1R |= filter_number_bit_pos;
+    /* 32-bit identifier or First 32-bit identifier */
+    CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = 
+    ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) |
+        (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow);
+    /* 32-bit mask or Second 32-bit identifier */
+    CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = 
+    ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) |
+        (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow);
+  }
+
+  /* Filter Mode */
+  if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask)
+  {
+    /*Id/Mask mode for the filter*/
+    CAN1->FM1R &= ~(uint32_t)filter_number_bit_pos;
+  }
+  else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */
+  {
+    /*Identifier list mode for the filter*/
+    CAN1->FM1R |= (uint32_t)filter_number_bit_pos;
+  }
+
+  /* Filter FIFO assignment */
+  if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO0)
+  {
+    /* FIFO 0 assignation for the filter */
+    CAN1->FFA1R &= ~(uint32_t)filter_number_bit_pos;
+  }
+
+  if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_Filter_FIFO1)
+  {
+    /* FIFO 1 assignation for the filter */
+    CAN1->FFA1R |= (uint32_t)filter_number_bit_pos;
+  }
+  
+  /* Filter activation */
+  if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE)
+  {
+    CAN1->FA1R |= filter_number_bit_pos;
+  }
+
+  /* Leave the initialisation mode for the filter */
+  CAN1->FMR &= ~FMR_FINIT;
+}
+
+/**
+  * @brief  Fills each CAN_InitStruct member with its default value.
+  * @param  CAN_InitStruct: pointer to a CAN_InitTypeDef structure which
+  *                         will be initialized.
+  * @retval None.
+  */
+void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct)
+{
+  /* Reset CAN init structure parameters values */
+  
+  /* Initialize the time triggered communication mode */
+  CAN_InitStruct->CAN_TTCM = DISABLE;
+  
+  /* Initialize the automatic bus-off management */
+  CAN_InitStruct->CAN_ABOM = DISABLE;
+  
+  /* Initialize the automatic wake-up mode */
+  CAN_InitStruct->CAN_AWUM = DISABLE;
+  
+  /* Initialize the no automatic retransmission */
+  CAN_InitStruct->CAN_NART = DISABLE;
+  
+  /* Initialize the receive FIFO locked mode */
+  CAN_InitStruct->CAN_RFLM = DISABLE;
+  
+  /* Initialize the transmit FIFO priority */
+  CAN_InitStruct->CAN_TXFP = DISABLE;
+  
+  /* Initialize the CAN_Mode member */
+  CAN_InitStruct->CAN_Mode = CAN_Mode_Normal;
+  
+  /* Initialize the CAN_SJW member */
+  CAN_InitStruct->CAN_SJW = CAN_SJW_1tq;
+  
+  /* Initialize the CAN_BS1 member */
+  CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq;
+  
+  /* Initialize the CAN_BS2 member */
+  CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq;
+  
+  /* Initialize the CAN_Prescaler member */
+  CAN_InitStruct->CAN_Prescaler = 1;
+}
+
+/**
+  * @brief  Select the start bank filter for slave CAN.
+  * @note   This function applies only to STM32 Connectivity line devices.
+  * @param  CAN_BankNumber: Select the start slave bank filter from 1..27.
+  * @retval None.
+  */
+void CAN_SlaveStartBank(uint8_t CAN_BankNumber) 
+{
+  /* Check the parameters */
+  assert_param(IS_CAN_BANKNUMBER(CAN_BankNumber));
+  
+  /* Enter Initialisation mode for the filter */
+  CAN1->FMR |= FMR_FINIT;
+  
+  /* Select the start slave bank */
+  CAN1->FMR &= (uint32_t)0xFFFFC0F1 ;
+  CAN1->FMR |= (uint32_t)(CAN_BankNumber)<<8;
+  
+  /* Leave Initialisation mode for the filter */
+  CAN1->FMR &= ~FMR_FINIT;
+}
+
+/**
+  * @brief  Enables or disables the DBG Freeze for CAN.
+  * @param  CANx:     where x can be 1 or 2 to to select the CAN peripheral.
+  * @param  NewState: new state of the CAN peripheral. This parameter can 
+  *                   be: ENABLE or DISABLE.
+  * @retval None.
+  */
+void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable Debug Freeze  */
+    CANx->MCR |= MCR_DBF;
+  }
+  else
+  {
+    /* Disable Debug Freeze */
+    CANx->MCR &= ~MCR_DBF;
+  }
+}
+
+
+/**
+  * @brief  Enables or disabes the CAN Time TriggerOperation communication mode.
+  * @param  CANx:      where x can be 1 or 2 to to select the CAN peripheral.
+  * @param  NewState : Mode new state , can be one of @ref FunctionalState.
+  * @note   when enabled, Time stamp (TIME[15:0]) value is sent in the last 
+  *         two data bytes of the 8-byte message: TIME[7:0] in data byte 6 
+  *         and TIME[15:8] in data byte 7 
+  * @note   DLC must be programmed as 8 in order Time Stamp (2 bytes) to be 
+  *         sent over the CAN bus.  
+  * @retval None
+  */
+void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the TTCM mode */
+    CANx->MCR |= CAN_MCR_TTCM;
+
+    /* Set TGT bits */
+    CANx->sTxMailBox[0].TDTR |= ((uint32_t)CAN_TDT0R_TGT);
+    CANx->sTxMailBox[1].TDTR |= ((uint32_t)CAN_TDT1R_TGT);
+    CANx->sTxMailBox[2].TDTR |= ((uint32_t)CAN_TDT2R_TGT);
+  }
+  else
+  {
+    /* Disable the TTCM mode */
+    CANx->MCR &= (uint32_t)(~(uint32_t)CAN_MCR_TTCM);
+
+    /* Reset TGT bits */
+    CANx->sTxMailBox[0].TDTR &= ((uint32_t)~CAN_TDT0R_TGT);
+    CANx->sTxMailBox[1].TDTR &= ((uint32_t)~CAN_TDT1R_TGT);
+    CANx->sTxMailBox[2].TDTR &= ((uint32_t)~CAN_TDT2R_TGT);
+  }
+}
+/**
+  * @brief  Initiates the transmission of a message.
+  * @param  CANx:      where x can be 1 or 2 to to select the CAN peripheral.
+  * @param  TxMessage: pointer to a structure which contains CAN Id, CAN
+  *                    DLC and CAN data.
+  * @retval The number of the mailbox that is used for transmission
+  *                    or CAN_TxStatus_NoMailBox if there is no empty mailbox.
+  */
+uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage)
+{
+  uint8_t transmit_mailbox = 0;
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_IDTYPE(TxMessage->IDE));
+  assert_param(IS_CAN_RTR(TxMessage->RTR));
+  assert_param(IS_CAN_DLC(TxMessage->DLC));
+
+  /* Select one empty transmit mailbox */
+  if ((CANx->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
+  {
+    transmit_mailbox = 0;
+  }
+  else if ((CANx->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
+  {
+    transmit_mailbox = 1;
+  }
+  else if ((CANx->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
+  {
+    transmit_mailbox = 2;
+  }
+  else
+  {
+    transmit_mailbox = CAN_TxStatus_NoMailBox;
+  }
+
+  if (transmit_mailbox != CAN_TxStatus_NoMailBox)
+  {
+    /* Set up the Id */
+    CANx->sTxMailBox[transmit_mailbox].TIR &= TMIDxR_TXRQ;
+    if (TxMessage->IDE == CAN_Id_Standard)
+    {
+      assert_param(IS_CAN_STDID(TxMessage->StdId));  
+      CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->StdId << 21) | \
+                                                  TxMessage->RTR);
+    }
+    else
+    {
+      assert_param(IS_CAN_EXTID(TxMessage->ExtId));
+      CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->ExtId << 3) | \
+                                                  TxMessage->IDE | \
+                                                  TxMessage->RTR);
+    }
+    
+    /* Set up the DLC */
+    TxMessage->DLC &= (uint8_t)0x0000000F;
+    CANx->sTxMailBox[transmit_mailbox].TDTR &= (uint32_t)0xFFFFFFF0;
+    CANx->sTxMailBox[transmit_mailbox].TDTR |= TxMessage->DLC;
+
+    /* Set up the data field */
+    CANx->sTxMailBox[transmit_mailbox].TDLR = (((uint32_t)TxMessage->Data[3] << 24) | 
+                                             ((uint32_t)TxMessage->Data[2] << 16) |
+                                             ((uint32_t)TxMessage->Data[1] << 8) | 
+                                             ((uint32_t)TxMessage->Data[0]));
+    CANx->sTxMailBox[transmit_mailbox].TDHR = (((uint32_t)TxMessage->Data[7] << 24) | 
+                                             ((uint32_t)TxMessage->Data[6] << 16) |
+                                             ((uint32_t)TxMessage->Data[5] << 8) |
+                                             ((uint32_t)TxMessage->Data[4]));
+    /* Request transmission */
+    CANx->sTxMailBox[transmit_mailbox].TIR |= TMIDxR_TXRQ;
+  }
+  return transmit_mailbox;
+}
+
+/**
+  * @brief  Checks the transmission of a message.
+  * @param  CANx:            where x can be 1 or 2 to to select the 
+  *                          CAN peripheral.
+  * @param  TransmitMailbox: the number of the mailbox that is used for 
+  *                          transmission.
+  * @retval CAN_TxStatus_Ok if the CAN driver transmits the message, CAN_TxStatus_Failed 
+  *         in an other case.
+  */
+uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox)
+{
+  uint32_t state = 0;
+
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox));
+ 
+  switch (TransmitMailbox)
+  {
+    case (CAN_TXMAILBOX_0): 
+      state =   CANx->TSR &  (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0);
+      break;
+    case (CAN_TXMAILBOX_1): 
+      state =   CANx->TSR &  (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1);
+      break;
+    case (CAN_TXMAILBOX_2): 
+      state =   CANx->TSR &  (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2);
+      break;
+    default:
+      state = CAN_TxStatus_Failed;
+      break;
+  }
+  switch (state)
+  {
+      /* transmit pending  */
+    case (0x0): state = CAN_TxStatus_Pending;
+      break;
+      /* transmit failed  */
+     case (CAN_TSR_RQCP0 | CAN_TSR_TME0): state = CAN_TxStatus_Failed;
+      break;
+     case (CAN_TSR_RQCP1 | CAN_TSR_TME1): state = CAN_TxStatus_Failed;
+      break;
+     case (CAN_TSR_RQCP2 | CAN_TSR_TME2): state = CAN_TxStatus_Failed;
+      break;
+      /* transmit succeeded  */
+    case (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0):state = CAN_TxStatus_Ok;
+      break;
+    case (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1):state = CAN_TxStatus_Ok;
+      break;
+    case (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2):state = CAN_TxStatus_Ok;
+      break;
+    default: state = CAN_TxStatus_Failed;
+      break;
+  }
+  return (uint8_t) state;
+}
+
+/**
+  * @brief  Cancels a transmit request.
+  * @param  CANx:     where x can be 1 or 2 to to select the CAN peripheral. 
+  * @param  Mailbox:  Mailbox number.
+  * @retval None.
+  */
+void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox)
+{
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox));
+  /* abort transmission */
+  switch (Mailbox)
+  {
+    case (CAN_TXMAILBOX_0): CANx->TSR |= CAN_TSR_ABRQ0;
+      break;
+    case (CAN_TXMAILBOX_1): CANx->TSR |= CAN_TSR_ABRQ1;
+      break;
+    case (CAN_TXMAILBOX_2): CANx->TSR |= CAN_TSR_ABRQ2;
+      break;
+    default:
+      break;
+  }
+}
+
+
+/**
+  * @brief  Receives a message.
+  * @param  CANx:       where x can be 1 or 2 to to select the CAN peripheral.
+  * @param  FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+  * @param  RxMessage:  pointer to a structure receive message which contains 
+  *                     CAN Id, CAN DLC, CAN datas and FMI number.
+  * @retval None.
+  */
+void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage)
+{
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_FIFO(FIFONumber));
+  /* Get the Id */
+  RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RIR;
+  if (RxMessage->IDE == CAN_Id_Standard)
+  {
+    RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 21);
+  }
+  else
+  {
+    RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 3);
+  }
+  
+  RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RIR;
+  /* Get the DLC */
+  RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RDTR;
+  /* Get the FMI */
+  RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDTR >> 8);
+  /* Get the data field */
+  RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDLR;
+  RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 8);
+  RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 16);
+  RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 24);
+  RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDHR;
+  RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 8);
+  RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 16);
+  RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 24);
+  /* Release the FIFO */
+  /* Release FIFO0 */
+  if (FIFONumber == CAN_FIFO0)
+  {
+    CANx->RF0R |= CAN_RF0R_RFOM0;
+  }
+  /* Release FIFO1 */
+  else /* FIFONumber == CAN_FIFO1 */
+  {
+    CANx->RF1R |= CAN_RF1R_RFOM1;
+  }
+}
+
+/**
+  * @brief  Releases the specified FIFO.
+  * @param  CANx:       where x can be 1 or 2 to to select the CAN peripheral. 
+  * @param  FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1.
+  * @retval None.
+  */
+void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber)
+{
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_FIFO(FIFONumber));
+  /* Release FIFO0 */
+  if (FIFONumber == CAN_FIFO0)
+  {
+    CANx->RF0R |= CAN_RF0R_RFOM0;
+  }
+  /* Release FIFO1 */
+  else /* FIFONumber == CAN_FIFO1 */
+  {
+    CANx->RF1R |= CAN_RF1R_RFOM1;
+  }
+}
+
+/**
+  * @brief  Returns the number of pending messages.
+  * @param  CANx:       where x can be 1 or 2 to to select the CAN peripheral.
+  * @param  FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+  * @retval NbMessage : which is the number of pending message.
+  */
+uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber)
+{
+  uint8_t message_pending=0;
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_FIFO(FIFONumber));
+  if (FIFONumber == CAN_FIFO0)
+  {
+    message_pending = (uint8_t)(CANx->RF0R&(uint32_t)0x03);
+  }
+  else if (FIFONumber == CAN_FIFO1)
+  {
+    message_pending = (uint8_t)(CANx->RF1R&(uint32_t)0x03);
+  }
+  else
+  {
+    message_pending = 0;
+  }
+  return message_pending;
+}
+
+
+/**
+  * @brief   Select the CAN Operation mode.
+  * @param CAN_OperatingMode : CAN Operating Mode. This parameter can be one 
+  *                            of @ref CAN_OperatingMode_TypeDef enumeration.
+  * @retval status of the requested mode which can be 
+  *         - CAN_ModeStatus_Failed    CAN failed entering the specific mode 
+  *         - CAN_ModeStatus_Success   CAN Succeed entering the specific mode 
+
+  */
+uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode)
+{
+  uint8_t status = CAN_ModeStatus_Failed;
+  
+  /* Timeout for INAK or also for SLAK bits*/
+  uint32_t timeout = INAK_TIMEOUT; 
+
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_OPERATING_MODE(CAN_OperatingMode));
+
+  if (CAN_OperatingMode == CAN_OperatingMode_Initialization)
+  {
+    /* Request initialisation */
+    CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_SLEEP)) | CAN_MCR_INRQ);
+
+    /* Wait the acknowledge */
+    while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK) && (timeout != 0))
+    {
+      timeout--;
+    }
+    if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_INAK)
+    {
+      status = CAN_ModeStatus_Failed;
+    }
+    else
+    {
+      status = CAN_ModeStatus_Success;
+    }
+  }
+  else  if (CAN_OperatingMode == CAN_OperatingMode_Normal)
+  {
+    /* Request leave initialisation and sleep mode  and enter Normal mode */
+    CANx->MCR &= (uint32_t)(~(CAN_MCR_SLEEP|CAN_MCR_INRQ));
+
+    /* Wait the acknowledge */
+    while (((CANx->MSR & CAN_MODE_MASK) != 0) && (timeout!=0))
+    {
+      timeout--;
+    }
+    if ((CANx->MSR & CAN_MODE_MASK) != 0)
+    {
+      status = CAN_ModeStatus_Failed;
+    }
+    else
+    {
+      status = CAN_ModeStatus_Success;
+    }
+  }
+  else  if (CAN_OperatingMode == CAN_OperatingMode_Sleep)
+  {
+    /* Request Sleep mode */
+    CANx->MCR = (uint32_t)((CANx->MCR & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+
+    /* Wait the acknowledge */
+    while (((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK) && (timeout!=0))
+    {
+      timeout--;
+    }
+    if ((CANx->MSR & CAN_MODE_MASK) != CAN_MSR_SLAK)
+    {
+      status = CAN_ModeStatus_Failed;
+    }
+    else
+    {
+      status = CAN_ModeStatus_Success;
+    }
+  }
+  else
+  {
+    status = CAN_ModeStatus_Failed;
+  }
+
+  return  (uint8_t) status;
+}
+
+/**
+  * @brief  Enters the low power mode.
+  * @param  CANx:   where x can be 1 or 2 to to select the CAN peripheral.
+  * @retval status: CAN_Sleep_Ok if sleep entered, CAN_Sleep_Failed in an 
+  *                 other case.
+  */
+uint8_t CAN_Sleep(CAN_TypeDef* CANx)
+{
+  uint8_t sleepstatus = CAN_Sleep_Failed;
+  
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+    
+  /* Request Sleep mode */
+   CANx->MCR = (((CANx->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
+   
+  /* Sleep mode status */
+  if ((CANx->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) == CAN_MSR_SLAK)
+  {
+    /* Sleep mode not entered */
+    sleepstatus =  CAN_Sleep_Ok;
+  }
+  /* return sleep mode status */
+   return (uint8_t)sleepstatus;
+}
+
+/**
+  * @brief  Wakes the CAN up.
+  * @param  CANx:    where x can be 1 or 2 to to select the CAN peripheral.
+  * @retval status:  CAN_WakeUp_Ok if sleep mode left, CAN_WakeUp_Failed in an 
+  *                  other case.
+  */
+uint8_t CAN_WakeUp(CAN_TypeDef* CANx)
+{
+  uint32_t wait_slak = SLAK_TIMEOUT;
+  uint8_t wakeupstatus = CAN_WakeUp_Failed;
+  
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+    
+  /* Wake up request */
+  CANx->MCR &= ~(uint32_t)CAN_MCR_SLEEP;
+    
+  /* Sleep mode status */
+  while(((CANx->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)&&(wait_slak!=0x00))
+  {
+   wait_slak--;
+  }
+  if((CANx->MSR & CAN_MSR_SLAK) != CAN_MSR_SLAK)
+  {
+   /* wake up done : Sleep mode exited */
+    wakeupstatus = CAN_WakeUp_Ok;
+  }
+  /* return wakeup status */
+  return (uint8_t)wakeupstatus;
+}
+
+
+/**
+  * @brief  Returns the CANx's last error code (LEC).
+  * @param  CANx:          where x can be 1 or 2 to to select the CAN peripheral.  
+  * @retval CAN_ErrorCode: specifies the Error code : 
+  *                        - CAN_ERRORCODE_NoErr            No Error  
+  *                        - CAN_ERRORCODE_StuffErr         Stuff Error
+  *                        - CAN_ERRORCODE_FormErr          Form Error
+  *                        - CAN_ERRORCODE_ACKErr           Acknowledgment Error
+  *                        - CAN_ERRORCODE_BitRecessiveErr  Bit Recessive Error
+  *                        - CAN_ERRORCODE_BitDominantErr   Bit Dominant Error
+  *                        - CAN_ERRORCODE_CRCErr           CRC Error
+  *                        - CAN_ERRORCODE_SoftwareSetErr   Software Set Error  
+  */
+ 
+uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx)
+{
+  uint8_t errorcode=0;
+  
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  
+  /* Get the error code*/
+  errorcode = (((uint8_t)CANx->ESR) & (uint8_t)CAN_ESR_LEC);
+  
+  /* Return the error code*/
+  return errorcode;
+}
+/**
+  * @brief  Returns the CANx Receive Error Counter (REC).
+  * @note   In case of an error during reception, this counter is incremented 
+  *         by 1 or by 8 depending on the error condition as defined by the CAN 
+  *         standard. After every successful reception, the counter is 
+  *         decremented by 1 or reset to 120 if its value was higher than 128. 
+  *         When the counter value exceeds 127, the CAN controller enters the 
+  *         error passive state.  
+  * @param  CANx: where x can be 1 or 2 to to select the CAN peripheral.  
+  * @retval CAN Receive Error Counter. 
+  */
+uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx)
+{
+  uint8_t counter=0;
+  
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  
+  /* Get the Receive Error Counter*/
+  counter = (uint8_t)((CANx->ESR & CAN_ESR_REC)>> 24);
+  
+  /* Return the Receive Error Counter*/
+  return counter;
+}
+
+
+/**
+  * @brief  Returns the LSB of the 9-bit CANx Transmit Error Counter(TEC).
+  * @param  CANx:   where x can be 1 or 2 to to select the CAN peripheral.  
+  * @retval LSB of the 9-bit CAN Transmit Error Counter. 
+  */
+uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx)
+{
+  uint8_t counter=0;
+  
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  
+  /* Get the LSB of the 9-bit CANx Transmit Error Counter(TEC) */
+  counter = (uint8_t)((CANx->ESR & CAN_ESR_TEC)>> 16);
+  
+  /* Return the LSB of the 9-bit CANx Transmit Error Counter(TEC) */
+  return counter;
+}
+
+
+/**
+  * @brief  Enables or disables the specified CANx interrupts.
+  * @param  CANx:   where x can be 1 or 2 to to select the CAN peripheral.
+  * @param  CAN_IT: specifies the CAN interrupt sources to be enabled or disabled.
+  *                 This parameter can be: 
+  *                 - CAN_IT_TME, 
+  *                 - CAN_IT_FMP0, 
+  *                 - CAN_IT_FF0,
+  *                 - CAN_IT_FOV0, 
+  *                 - CAN_IT_FMP1, 
+  *                 - CAN_IT_FF1,
+  *                 - CAN_IT_FOV1, 
+  *                 - CAN_IT_EWG, 
+  *                 - CAN_IT_EPV,
+  *                 - CAN_IT_LEC, 
+  *                 - CAN_IT_ERR, 
+  *                 - CAN_IT_WKU or 
+  *                 - CAN_IT_SLK.
+  * @param  NewState: new state of the CAN interrupts.
+  *                   This parameter can be: ENABLE or DISABLE.
+  * @retval None.
+  */
+void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_IT(CAN_IT));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected CANx interrupt */
+    CANx->IER |= CAN_IT;
+  }
+  else
+  {
+    /* Disable the selected CANx interrupt */
+    CANx->IER &= ~CAN_IT;
+  }
+}
+/**
+  * @brief  Checks whether the specified CAN flag is set or not.
+  * @param  CANx:     where x can be 1 or 2 to to select the CAN peripheral.
+  * @param  CAN_FLAG: specifies the flag to check.
+  *                   This parameter can be one of the following flags: 
+  *                  - CAN_FLAG_EWG
+  *                  - CAN_FLAG_EPV 
+  *                  - CAN_FLAG_BOF
+  *                  - CAN_FLAG_RQCP0
+  *                  - CAN_FLAG_RQCP1
+  *                  - CAN_FLAG_RQCP2
+  *                  - CAN_FLAG_FMP1   
+  *                  - CAN_FLAG_FF1       
+  *                  - CAN_FLAG_FOV1   
+  *                  - CAN_FLAG_FMP0   
+  *                  - CAN_FLAG_FF0       
+  *                  - CAN_FLAG_FOV0   
+  *                  - CAN_FLAG_WKU 
+  *                  - CAN_FLAG_SLAK  
+  *                  - CAN_FLAG_LEC       
+  * @retval The new state of CAN_FLAG (SET or RESET).
+  */
+FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_GET_FLAG(CAN_FLAG));
+  
+
+  if((CAN_FLAG & CAN_FLAGS_ESR) != (uint32_t)RESET)
+  { 
+    /* Check the status of the specified CAN flag */
+    if ((CANx->ESR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+    { 
+      /* CAN_FLAG is set */
+      bitstatus = SET;
+    }
+    else
+    { 
+      /* CAN_FLAG is reset */
+      bitstatus = RESET;
+    }
+  }
+  else if((CAN_FLAG & CAN_FLAGS_MSR) != (uint32_t)RESET)
+  { 
+    /* Check the status of the specified CAN flag */
+    if ((CANx->MSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+    { 
+      /* CAN_FLAG is set */
+      bitstatus = SET;
+    }
+    else
+    { 
+      /* CAN_FLAG is reset */
+      bitstatus = RESET;
+    }
+  }
+  else if((CAN_FLAG & CAN_FLAGS_TSR) != (uint32_t)RESET)
+  { 
+    /* Check the status of the specified CAN flag */
+    if ((CANx->TSR & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+    { 
+      /* CAN_FLAG is set */
+      bitstatus = SET;
+    }
+    else
+    { 
+      /* CAN_FLAG is reset */
+      bitstatus = RESET;
+    }
+  }
+  else if((CAN_FLAG & CAN_FLAGS_RF0R) != (uint32_t)RESET)
+  { 
+    /* Check the status of the specified CAN flag */
+    if ((CANx->RF0R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+    { 
+      /* CAN_FLAG is set */
+      bitstatus = SET;
+    }
+    else
+    { 
+      /* CAN_FLAG is reset */
+      bitstatus = RESET;
+    }
+  }
+  else /* If(CAN_FLAG & CAN_FLAGS_RF1R != (uint32_t)RESET) */
+  { 
+    /* Check the status of the specified CAN flag */
+    if ((uint32_t)(CANx->RF1R & (CAN_FLAG & 0x000FFFFF)) != (uint32_t)RESET)
+    { 
+      /* CAN_FLAG is set */
+      bitstatus = SET;
+    }
+    else
+    { 
+      /* CAN_FLAG is reset */
+      bitstatus = RESET;
+    }
+  }
+  /* Return the CAN_FLAG status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the CAN's pending flags.
+  * @param  CANx:     where x can be 1 or 2 to to select the CAN peripheral.
+  * @param  CAN_FLAG: specifies the flag to clear.
+  *                   This parameter can be one of the following flags: 
+  *                    - CAN_FLAG_RQCP0
+  *                    - CAN_FLAG_RQCP1
+  *                    - CAN_FLAG_RQCP2
+  *                    - CAN_FLAG_FF1       
+  *                    - CAN_FLAG_FOV1   
+  *                    - CAN_FLAG_FF0       
+  *                    - CAN_FLAG_FOV0   
+  *                    - CAN_FLAG_WKU   
+  *                    - CAN_FLAG_SLAK    
+  *                    - CAN_FLAG_LEC       
+  * @retval None.
+  */
+void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG)
+{
+  uint32_t flagtmp=0;
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_CLEAR_FLAG(CAN_FLAG));
+  
+  if (CAN_FLAG == CAN_FLAG_LEC) /* ESR register */
+  {
+    /* Clear the selected CAN flags */
+    CANx->ESR = (uint32_t)RESET;
+  }
+  else /* MSR or TSR or RF0R or RF1R */
+  {
+    flagtmp = CAN_FLAG & 0x000FFFFF;
+
+    if ((CAN_FLAG & CAN_FLAGS_RF0R)!=(uint32_t)RESET)
+    {
+      /* Receive Flags */
+      CANx->RF0R = (uint32_t)(flagtmp);
+    }
+    else if ((CAN_FLAG & CAN_FLAGS_RF1R)!=(uint32_t)RESET)
+    {
+      /* Receive Flags */
+      CANx->RF1R = (uint32_t)(flagtmp);
+    }
+    else if ((CAN_FLAG & CAN_FLAGS_TSR)!=(uint32_t)RESET)
+    {
+      /* Transmit Flags */
+      CANx->TSR = (uint32_t)(flagtmp);
+    }
+    else /* If((CAN_FLAG & CAN_FLAGS_MSR)!=(uint32_t)RESET) */
+    {
+      /* Operating mode Flags */
+      CANx->MSR = (uint32_t)(flagtmp);
+    }
+  }
+}
+
+/**
+  * @brief  Checks whether the specified CANx interrupt has occurred or not.
+  * @param  CANx:    where x can be 1 or 2 to to select the CAN peripheral.
+  * @param  CAN_IT:  specifies the CAN interrupt source to check.
+  *                  This parameter can be one of the following flags: 
+  *                 -  CAN_IT_TME               
+  *                 -  CAN_IT_FMP0              
+  *                 -  CAN_IT_FF0               
+  *                 -  CAN_IT_FOV0              
+  *                 -  CAN_IT_FMP1              
+  *                 -  CAN_IT_FF1               
+  *                 -  CAN_IT_FOV1              
+  *                 -  CAN_IT_WKU  
+  *                 -  CAN_IT_SLK  
+  *                 -  CAN_IT_EWG    
+  *                 -  CAN_IT_EPV    
+  *                 -  CAN_IT_BOF    
+  *                 -  CAN_IT_LEC    
+  *                 -  CAN_IT_ERR 
+  * @retval The current state of CAN_IT (SET or RESET).
+  */
+ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT)
+{
+  ITStatus itstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_IT(CAN_IT));
+  
+  /* check the enable interrupt bit */
+ if((CANx->IER & CAN_IT) != RESET)
+ {
+   /* in case the Interrupt is enabled, .... */
+    switch (CAN_IT)
+    {
+      case CAN_IT_TME:
+               /* Check CAN_TSR_RQCPx bits */
+	             itstatus = CheckITStatus(CANx->TSR, CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2);  
+	      break;
+      case CAN_IT_FMP0:
+               /* Check CAN_RF0R_FMP0 bit */
+	             itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FMP0);  
+	      break;
+      case CAN_IT_FF0:
+               /* Check CAN_RF0R_FULL0 bit */
+               itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FULL0);  
+	      break;
+      case CAN_IT_FOV0:
+               /* Check CAN_RF0R_FOVR0 bit */
+               itstatus = CheckITStatus(CANx->RF0R, CAN_RF0R_FOVR0);  
+	      break;
+      case CAN_IT_FMP1:
+               /* Check CAN_RF1R_FMP1 bit */
+               itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FMP1);  
+	      break;
+      case CAN_IT_FF1:
+               /* Check CAN_RF1R_FULL1 bit */
+	             itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FULL1);  
+	      break;
+      case CAN_IT_FOV1:
+               /* Check CAN_RF1R_FOVR1 bit */
+	             itstatus = CheckITStatus(CANx->RF1R, CAN_RF1R_FOVR1);  
+	      break;
+      case CAN_IT_WKU:
+               /* Check CAN_MSR_WKUI bit */
+               itstatus = CheckITStatus(CANx->MSR, CAN_MSR_WKUI);  
+	      break;
+      case CAN_IT_SLK:
+               /* Check CAN_MSR_SLAKI bit */
+	             itstatus = CheckITStatus(CANx->MSR, CAN_MSR_SLAKI);  
+	      break;
+      case CAN_IT_EWG:
+               /* Check CAN_ESR_EWGF bit */
+	             itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EWGF);  
+	      break;
+      case CAN_IT_EPV:
+               /* Check CAN_ESR_EPVF bit */
+	             itstatus = CheckITStatus(CANx->ESR, CAN_ESR_EPVF);  
+	      break;
+      case CAN_IT_BOF:
+               /* Check CAN_ESR_BOFF bit */
+	             itstatus = CheckITStatus(CANx->ESR, CAN_ESR_BOFF);  
+	      break;
+      case CAN_IT_LEC:
+               /* Check CAN_ESR_LEC bit */
+	             itstatus = CheckITStatus(CANx->ESR, CAN_ESR_LEC);  
+	      break;
+      case CAN_IT_ERR:
+               /* Check CAN_MSR_ERRI bit */ 
+               itstatus = CheckITStatus(CANx->MSR, CAN_MSR_ERRI); 
+	      break;
+      default :
+               /* in case of error, return RESET */
+              itstatus = RESET;
+              break;
+    }
+  }
+  else
+  {
+   /* in case the Interrupt is not enabled, return RESET */
+    itstatus  = RESET;
+  }
+  
+  /* Return the CAN_IT status */
+  return  itstatus;
+}
+
+/**
+  * @brief  Clears the CANx's interrupt pending bits.
+  * @param  CANx:    where x can be 1 or 2 to to select the CAN peripheral.
+  * @param  CAN_IT: specifies the interrupt pending bit to clear.
+  *                  -  CAN_IT_TME                     
+  *                  -  CAN_IT_FF0               
+  *                  -  CAN_IT_FOV0                     
+  *                  -  CAN_IT_FF1               
+  *                  -  CAN_IT_FOV1              
+  *                  -  CAN_IT_WKU  
+  *                  -  CAN_IT_SLK  
+  *                  -  CAN_IT_EWG    
+  *                  -  CAN_IT_EPV    
+  *                  -  CAN_IT_BOF    
+  *                  -  CAN_IT_LEC    
+  *                  -  CAN_IT_ERR 
+  * @retval None.
+  */
+void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT)
+{
+  /* Check the parameters */
+  assert_param(IS_CAN_ALL_PERIPH(CANx));
+  assert_param(IS_CAN_CLEAR_IT(CAN_IT));
+
+  switch (CAN_IT)
+  {
+      case CAN_IT_TME:
+              /* Clear CAN_TSR_RQCPx (rc_w1)*/
+	      CANx->TSR = CAN_TSR_RQCP0|CAN_TSR_RQCP1|CAN_TSR_RQCP2;  
+	      break;
+      case CAN_IT_FF0:
+              /* Clear CAN_RF0R_FULL0 (rc_w1)*/
+	      CANx->RF0R = CAN_RF0R_FULL0; 
+	      break;
+      case CAN_IT_FOV0:
+              /* Clear CAN_RF0R_FOVR0 (rc_w1)*/
+	      CANx->RF0R = CAN_RF0R_FOVR0; 
+	      break;
+      case CAN_IT_FF1:
+              /* Clear CAN_RF1R_FULL1 (rc_w1)*/
+	      CANx->RF1R = CAN_RF1R_FULL1;  
+	      break;
+      case CAN_IT_FOV1:
+              /* Clear CAN_RF1R_FOVR1 (rc_w1)*/
+	      CANx->RF1R = CAN_RF1R_FOVR1; 
+	      break;
+      case CAN_IT_WKU:
+              /* Clear CAN_MSR_WKUI (rc_w1)*/
+	      CANx->MSR = CAN_MSR_WKUI;  
+	      break;
+      case CAN_IT_SLK:
+              /* Clear CAN_MSR_SLAKI (rc_w1)*/ 
+	      CANx->MSR = CAN_MSR_SLAKI;   
+	      break;
+      case CAN_IT_EWG:
+              /* Clear CAN_MSR_ERRI (rc_w1) */
+	      CANx->MSR = CAN_MSR_ERRI;
+              /* Note : the corresponding Flag is cleared by hardware depending 
+                        of the CAN Bus status*/ 
+	      break;
+      case CAN_IT_EPV:
+              /* Clear CAN_MSR_ERRI (rc_w1) */
+	      CANx->MSR = CAN_MSR_ERRI; 
+              /* Note : the corresponding Flag is cleared by hardware depending 
+                        of the CAN Bus status*/
+	      break;
+      case CAN_IT_BOF:
+              /* Clear CAN_MSR_ERRI (rc_w1) */ 
+	      CANx->MSR = CAN_MSR_ERRI; 
+              /* Note : the corresponding Flag is cleared by hardware depending 
+                        of the CAN Bus status*/
+	      break;
+      case CAN_IT_LEC:
+              /*  Clear LEC bits */
+	      CANx->ESR = RESET; 
+              /* Clear CAN_MSR_ERRI (rc_w1) */
+	      CANx->MSR = CAN_MSR_ERRI; 
+	      break;
+      case CAN_IT_ERR:
+              /*Clear LEC bits */
+	      CANx->ESR = RESET; 
+              /* Clear CAN_MSR_ERRI (rc_w1) */
+	      CANx->MSR = CAN_MSR_ERRI; 
+	      /* Note : BOFF, EPVF and EWGF Flags are cleared by hardware depending 
+                  of the CAN Bus status*/
+	      break;
+      default :
+	      break;
+   }
+}
+
+/**
+  * @brief  Checks whether the CAN interrupt has occurred or not.
+  * @param  CAN_Reg: specifies the CAN interrupt register to check.
+  * @param  It_Bit:  specifies the interrupt source bit to check.
+  * @retval The new state of the CAN Interrupt (SET or RESET).
+  */
+static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit)
+{
+  ITStatus pendingbitstatus = RESET;
+  
+  if ((CAN_Reg & It_Bit) != (uint32_t)RESET)
+  {
+    /* CAN_IT is set */
+    pendingbitstatus = SET;
+  }
+  else
+  {
+    /* CAN_IT is reset */
+    pendingbitstatus = RESET;
+  }
+  return pendingbitstatus;
+}
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_cec.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_cec.c
new file mode 100644
index 0000000000000000000000000000000000000000..08b501a0c4e2aec349d5b4c18c1f13f9b60f1612
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_cec.c
@@ -0,0 +1,433 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_cec.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the CEC firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_cec.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup CEC 
+  * @brief CEC driver modules
+  * @{
+  */
+
+/** @defgroup CEC_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @defgroup CEC_Private_Defines
+  * @{
+  */ 
+
+/* ------------ CEC registers bit address in the alias region ----------- */
+#define CEC_OFFSET                (CEC_BASE - PERIPH_BASE)
+
+/* --- CFGR Register ---*/
+
+/* Alias word address of PE bit */
+#define CFGR_OFFSET                 (CEC_OFFSET + 0x00)
+#define PE_BitNumber                0x00
+#define CFGR_PE_BB                  (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (PE_BitNumber * 4))
+
+/* Alias word address of IE bit */
+#define IE_BitNumber                0x01
+#define CFGR_IE_BB                  (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (IE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of TSOM bit */
+#define CSR_OFFSET                  (CEC_OFFSET + 0x10)
+#define TSOM_BitNumber              0x00
+#define CSR_TSOM_BB                 (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TSOM_BitNumber * 4))
+
+/* Alias word address of TEOM bit */
+#define TEOM_BitNumber              0x01
+#define CSR_TEOM_BB                 (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEOM_BitNumber * 4))
+  
+#define CFGR_CLEAR_Mask            (uint8_t)(0xF3)        /* CFGR register Mask */
+#define FLAG_Mask                  ((uint32_t)0x00FFFFFF) /* CEC FLAG mask */
+ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup CEC_Private_Macros
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup CEC_Private_Variables
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup CEC_Private_FunctionPrototypes
+  * @{
+  */
+ 
+/**
+  * @}
+  */ 
+
+
+/** @defgroup CEC_Private_Functions
+  * @{
+  */ 
+
+/**
+  * @brief  Deinitializes the CEC peripheral registers to their default reset 
+  *         values.
+  * @param  None
+  * @retval None
+  */
+void CEC_DeInit(void)
+{
+  /* Enable CEC reset state */
+  RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, ENABLE);  
+  /* Release CEC from reset state */
+  RCC_APB1PeriphResetCmd(RCC_APB1Periph_CEC, DISABLE); 
+}
+
+
+/**
+  * @brief  Initializes the CEC peripheral according to the specified 
+  *         parameters in the CEC_InitStruct.
+  * @param  CEC_InitStruct: pointer to an CEC_InitTypeDef structure that
+  *         contains the configuration information for the specified
+  *         CEC peripheral.
+  * @retval None
+  */
+void CEC_Init(CEC_InitTypeDef* CEC_InitStruct)
+{
+  uint16_t tmpreg = 0;
+ 
+  /* Check the parameters */
+  assert_param(IS_CEC_BIT_TIMING_ERROR_MODE(CEC_InitStruct->CEC_BitTimingMode)); 
+  assert_param(IS_CEC_BIT_PERIOD_ERROR_MODE(CEC_InitStruct->CEC_BitPeriodMode));
+     
+  /*---------------------------- CEC CFGR Configuration -----------------*/
+  /* Get the CEC CFGR value */
+  tmpreg = CEC->CFGR;
+  
+  /* Clear BTEM and BPEM bits */
+  tmpreg &= CFGR_CLEAR_Mask;
+  
+  /* Configure CEC: Bit Timing Error and Bit Period Error */
+  tmpreg |= (uint16_t)(CEC_InitStruct->CEC_BitTimingMode | CEC_InitStruct->CEC_BitPeriodMode);
+
+  /* Write to CEC CFGR  register*/
+  CEC->CFGR = tmpreg;
+  
+}
+
+/**
+  * @brief  Enables or disables the specified CEC peripheral.
+  * @param  NewState: new state of the CEC peripheral. 
+  *     This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void CEC_Cmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  *(__IO uint32_t *) CFGR_PE_BB = (uint32_t)NewState;
+
+  if(NewState == DISABLE)
+  {
+    /* Wait until the PE bit is cleared by hardware (Idle Line detected) */
+    while((CEC->CFGR & CEC_CFGR_PE) != (uint32_t)RESET)
+    {
+    }  
+  }  
+}
+
+/**
+  * @brief  Enables or disables the CEC interrupt.
+  * @param  NewState: new state of the CEC interrupt.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void CEC_ITConfig(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  *(__IO uint32_t *) CFGR_IE_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Defines the Own Address of the CEC device.
+  * @param  CEC_OwnAddress: The CEC own address
+  * @retval None
+  */
+void CEC_OwnAddressConfig(uint8_t CEC_OwnAddress)
+{
+  /* Check the parameters */
+  assert_param(IS_CEC_ADDRESS(CEC_OwnAddress));
+
+  /* Set the CEC own address */
+  CEC->OAR = CEC_OwnAddress;
+}
+
+/**
+  * @brief  Sets the CEC prescaler value.
+  * @param  CEC_Prescaler: CEC prescaler new value
+  * @retval None
+  */
+void CEC_SetPrescaler(uint16_t CEC_Prescaler)
+{
+  /* Check the parameters */
+  assert_param(IS_CEC_PRESCALER(CEC_Prescaler));
+
+  /* Set the  Prescaler value*/
+  CEC->PRES = CEC_Prescaler;
+}
+
+/**
+  * @brief  Transmits single data through the CEC peripheral.
+  * @param  Data: the data to transmit.
+  * @retval None
+  */
+void CEC_SendDataByte(uint8_t Data)
+{  
+  /* Transmit Data */
+  CEC->TXD = Data ;
+}
+
+
+/**
+  * @brief  Returns the most recent received data by the CEC peripheral.
+  * @param  None
+  * @retval The received data.
+  */
+uint8_t CEC_ReceiveDataByte(void)
+{
+  /* Receive Data */
+  return (uint8_t)(CEC->RXD);
+}
+
+/**
+  * @brief  Starts a new message.
+  * @param  None
+  * @retval None
+  */
+void CEC_StartOfMessage(void)
+{  
+  /* Starts of new message */
+  *(__IO uint32_t *) CSR_TSOM_BB = (uint32_t)0x1;
+}
+
+/**
+  * @brief  Transmits message with or without an EOM bit.
+  * @param  NewState: new state of the CEC Tx End Of Message. 
+  *     This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void CEC_EndOfMessageCmd(FunctionalState NewState)
+{   
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  /* The data byte will be transmitted with or without an EOM bit*/
+  *(__IO uint32_t *) CSR_TEOM_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Gets the CEC flag status
+  * @param  CEC_FLAG: specifies the CEC flag to check. 
+  *   This parameter can be one of the following values:
+  *     @arg CEC_FLAG_BTE: Bit Timing Error
+  *     @arg CEC_FLAG_BPE: Bit Period Error
+  *     @arg CEC_FLAG_RBTFE: Rx Block Transfer Finished Error
+  *     @arg CEC_FLAG_SBE: Start Bit Error
+  *     @arg CEC_FLAG_ACKE: Block Acknowledge Error
+  *     @arg CEC_FLAG_LINE: Line Error
+  *     @arg CEC_FLAG_TBTFE: Tx Block Transfer Finished Error
+  *     @arg CEC_FLAG_TEOM: Tx End Of Message 
+  *     @arg CEC_FLAG_TERR: Tx Error
+  *     @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished
+  *     @arg CEC_FLAG_RSOM: Rx Start Of Message
+  *     @arg CEC_FLAG_REOM: Rx End Of Message
+  *     @arg CEC_FLAG_RERR: Rx Error
+  *     @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished
+  * @retval The new state of CEC_FLAG (SET or RESET)
+  */
+FlagStatus CEC_GetFlagStatus(uint32_t CEC_FLAG) 
+{
+  FlagStatus bitstatus = RESET;
+  uint32_t cecreg = 0, cecbase = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_CEC_GET_FLAG(CEC_FLAG));
+ 
+  /* Get the CEC peripheral base address */
+  cecbase = (uint32_t)(CEC_BASE);
+  
+  /* Read flag register index */
+  cecreg = CEC_FLAG >> 28;
+  
+  /* Get bit[23:0] of the flag */
+  CEC_FLAG &= FLAG_Mask;
+  
+  if(cecreg != 0)
+  {
+    /* Flag in CEC ESR Register */
+    CEC_FLAG = (uint32_t)(CEC_FLAG >> 16);
+    
+    /* Get the CEC ESR register address */
+    cecbase += 0xC;
+  }
+  else
+  {
+    /* Get the CEC CSR register address */
+    cecbase += 0x10;
+  }
+  
+  if(((*(__IO uint32_t *)cecbase) & CEC_FLAG) != (uint32_t)RESET)
+  {
+    /* CEC_FLAG is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* CEC_FLAG is reset */
+    bitstatus = RESET;
+  }
+  
+  /* Return the CEC_FLAG status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the CEC's pending flags.
+  * @param  CEC_FLAG: specifies the flag to clear. 
+  *   This parameter can be any combination of the following values:
+  *     @arg CEC_FLAG_TERR: Tx Error
+  *     @arg CEC_FLAG_TBTRF: Tx Byte Transfer Request or Block Transfer Finished
+  *     @arg CEC_FLAG_RSOM: Rx Start Of Message
+  *     @arg CEC_FLAG_REOM: Rx End Of Message
+  *     @arg CEC_FLAG_RERR: Rx Error
+  *     @arg CEC_FLAG_RBTF: Rx Byte/Block Transfer Finished
+  * @retval None
+  */
+void CEC_ClearFlag(uint32_t CEC_FLAG)
+{ 
+  uint32_t tmp = 0x0;
+  
+  /* Check the parameters */
+  assert_param(IS_CEC_CLEAR_FLAG(CEC_FLAG));
+
+  tmp = CEC->CSR & 0x2;
+       
+  /* Clear the selected CEC flags */
+  CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_FLAG) & 0xFFFFFFFC) | tmp);
+}
+
+/**
+  * @brief  Checks whether the specified CEC interrupt has occurred or not.
+  * @param  CEC_IT: specifies the CEC interrupt source to check. 
+  *   This parameter can be one of the following values:
+  *     @arg CEC_IT_TERR: Tx Error
+  *     @arg CEC_IT_TBTF: Tx Block Transfer Finished
+  *     @arg CEC_IT_RERR: Rx Error
+  *     @arg CEC_IT_RBTF: Rx Block Transfer Finished
+  * @retval The new state of CEC_IT (SET or RESET).
+  */
+ITStatus CEC_GetITStatus(uint8_t CEC_IT)
+{
+  ITStatus bitstatus = RESET;
+  uint32_t enablestatus = 0;
+  
+  /* Check the parameters */
+   assert_param(IS_CEC_GET_IT(CEC_IT));
+   
+  /* Get the CEC IT enable bit status */
+  enablestatus = (CEC->CFGR & (uint8_t)CEC_CFGR_IE) ;
+  
+  /* Check the status of the specified CEC interrupt */
+  if (((CEC->CSR & CEC_IT) != (uint32_t)RESET) && enablestatus)
+  {
+    /* CEC_IT is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* CEC_IT is reset */
+    bitstatus = RESET;
+  }
+  /* Return the CEC_IT status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the CEC's interrupt pending bits.
+  * @param  CEC_IT: specifies the CEC interrupt pending bit to clear.
+  *   This parameter can be any combination of the following values:
+  *     @arg CEC_IT_TERR: Tx Error
+  *     @arg CEC_IT_TBTF: Tx Block Transfer Finished
+  *     @arg CEC_IT_RERR: Rx Error
+  *     @arg CEC_IT_RBTF: Rx Block Transfer Finished
+  * @retval None
+  */
+void CEC_ClearITPendingBit(uint16_t CEC_IT)
+{
+  uint32_t tmp = 0x0;
+  
+  /* Check the parameters */
+  assert_param(IS_CEC_GET_IT(CEC_IT));
+  
+  tmp = CEC->CSR & 0x2;
+  
+  /* Clear the selected CEC interrupt pending bits */
+  CEC->CSR &= (uint32_t)(((~(uint32_t)CEC_IT) & 0xFFFFFFFC) | tmp);
+}
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_crc.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_crc.c
new file mode 100644
index 0000000000000000000000000000000000000000..ef0c047d8ff434c1898759315da4220fdd960789
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_crc.c
@@ -0,0 +1,160 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_crc.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the CRC firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_crc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup CRC 
+  * @brief CRC driver modules
+  * @{
+  */
+
+/** @defgroup CRC_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Private_Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup CRC_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Resets the CRC Data register (DR).
+  * @param  None
+  * @retval None
+  */
+void CRC_ResetDR(void)
+{
+  /* Reset CRC generator */
+  CRC->CR = CRC_CR_RESET;
+}
+
+/**
+  * @brief  Computes the 32-bit CRC of a given data word(32-bit).
+  * @param  Data: data word(32-bit) to compute its CRC
+  * @retval 32-bit CRC
+  */
+uint32_t CRC_CalcCRC(uint32_t Data)
+{
+  CRC->DR = Data;
+  
+  return (CRC->DR);
+}
+
+/**
+  * @brief  Computes the 32-bit CRC of a given buffer of data word(32-bit).
+  * @param  pBuffer: pointer to the buffer containing the data to be computed
+  * @param  BufferLength: length of the buffer to be computed					
+  * @retval 32-bit CRC
+  */
+uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength)
+{
+  uint32_t index = 0;
+  
+  for(index = 0; index < BufferLength; index++)
+  {
+    CRC->DR = pBuffer[index];
+  }
+  return (CRC->DR);
+}
+
+/**
+  * @brief  Returns the current CRC value.
+  * @param  None
+  * @retval 32-bit CRC
+  */
+uint32_t CRC_GetCRC(void)
+{
+  return (CRC->DR);
+}
+
+/**
+  * @brief  Stores a 8-bit data in the Independent Data(ID) register.
+  * @param  IDValue: 8-bit value to be stored in the ID register 					
+  * @retval None
+  */
+void CRC_SetIDRegister(uint8_t IDValue)
+{
+  CRC->IDR = IDValue;
+}
+
+/**
+  * @brief  Returns the 8-bit data stored in the Independent Data(ID) register
+  * @param  None
+  * @retval 8-bit value of the ID register 
+  */
+uint8_t CRC_GetIDRegister(void)
+{
+  return (CRC->IDR);
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_dac.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_dac.c
new file mode 100644
index 0000000000000000000000000000000000000000..025b8e28375959bd36e037b2a9b6159fff5544d8
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_dac.c
@@ -0,0 +1,571 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_dac.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the DAC firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dac.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup DAC 
+  * @brief DAC driver modules
+  * @{
+  */ 
+
+/** @defgroup DAC_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Private_Defines
+  * @{
+  */
+
+/* CR register Mask */
+#define CR_CLEAR_MASK              ((uint32_t)0x00000FFE)
+
+/* DAC Dual Channels SWTRIG masks */
+#define DUAL_SWTRIG_SET            ((uint32_t)0x00000003)
+#define DUAL_SWTRIG_RESET          ((uint32_t)0xFFFFFFFC)
+
+/* DHR registers offsets */
+#define DHR12R1_OFFSET             ((uint32_t)0x00000008)
+#define DHR12R2_OFFSET             ((uint32_t)0x00000014)
+#define DHR12RD_OFFSET             ((uint32_t)0x00000020)
+
+/* DOR register offset */
+#define DOR_OFFSET                 ((uint32_t)0x0000002C)
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DAC_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the DAC peripheral registers to their default reset values.
+  * @param  None
+  * @retval None
+  */
+void DAC_DeInit(void)
+{
+  /* Enable DAC reset state */
+  RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE);
+  /* Release DAC from reset state */
+  RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE);
+}
+
+/**
+  * @brief  Initializes the DAC peripheral according to the specified 
+  *         parameters in the DAC_InitStruct.
+  * @param  DAC_Channel: the selected DAC channel. 
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Channel_1: DAC Channel1 selected
+  *     @arg DAC_Channel_2: DAC Channel2 selected
+  * @param  DAC_InitStruct: pointer to a DAC_InitTypeDef structure that
+  *        contains the configuration information for the specified DAC channel.
+  * @retval None
+  */
+void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct)
+{
+  uint32_t tmpreg1 = 0, tmpreg2 = 0;
+  /* Check the DAC parameters */
+  assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger));
+  assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration));
+  assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude));
+  assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer));
+/*---------------------------- DAC CR Configuration --------------------------*/
+  /* Get the DAC CR value */
+  tmpreg1 = DAC->CR;
+  /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
+  tmpreg1 &= ~(CR_CLEAR_MASK << DAC_Channel);
+  /* Configure for the selected DAC channel: buffer output, trigger, wave generation,
+     mask/amplitude for wave generation */
+  /* Set TSELx and TENx bits according to DAC_Trigger value */
+  /* Set WAVEx bits according to DAC_WaveGeneration value */
+  /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ 
+  /* Set BOFFx bit according to DAC_OutputBuffer value */   
+  tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration |
+             DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer);
+  /* Calculate CR register value depending on DAC_Channel */
+  tmpreg1 |= tmpreg2 << DAC_Channel;
+  /* Write to DAC CR */
+  DAC->CR = tmpreg1;
+}
+
+/**
+  * @brief  Fills each DAC_InitStruct member with its default value.
+  * @param  DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will
+  *         be initialized.
+  * @retval None
+  */
+void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct)
+{
+/*--------------- Reset DAC init structure parameters values -----------------*/
+  /* Initialize the DAC_Trigger member */
+  DAC_InitStruct->DAC_Trigger = DAC_Trigger_None;
+  /* Initialize the DAC_WaveGeneration member */
+  DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None;
+  /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */
+  DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
+  /* Initialize the DAC_OutputBuffer member */
+  DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable;
+}
+
+/**
+  * @brief  Enables or disables the specified DAC channel.
+  * @param  DAC_Channel: the selected DAC channel. 
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Channel_1: DAC Channel1 selected
+  *     @arg DAC_Channel_2: DAC Channel2 selected
+  * @param  NewState: new state of the DAC channel. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(DAC_Channel));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected DAC channel */
+    DAC->CR |= (DAC_CR_EN1 << DAC_Channel);
+  }
+  else
+  {
+    /* Disable the selected DAC channel */
+    DAC->CR &= ~(DAC_CR_EN1 << DAC_Channel);
+  }
+}
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/**
+  * @brief  Enables or disables the specified DAC interrupts.
+  * @param  DAC_Channel: the selected DAC channel. 
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Channel_1: DAC Channel1 selected
+  *     @arg DAC_Channel_2: DAC Channel2 selected
+  * @param  DAC_IT: specifies the DAC interrupt sources to be enabled or disabled. 
+  *   This parameter can be the following values:
+  *     @arg DAC_IT_DMAUDR: DMA underrun interrupt mask                      
+  * @param  NewState: new state of the specified DAC interrupts.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */ 
+void DAC_ITConfig(uint32_t DAC_Channel, uint32_t DAC_IT, FunctionalState NewState)  
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(DAC_Channel));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  assert_param(IS_DAC_IT(DAC_IT)); 
+
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected DAC interrupts */
+    DAC->CR |=  (DAC_IT << DAC_Channel);
+  }
+  else
+  {
+    /* Disable the selected DAC interrupts */
+    DAC->CR &= (~(uint32_t)(DAC_IT << DAC_Channel));
+  }
+}
+#endif
+
+/**
+  * @brief  Enables or disables the specified DAC channel DMA request.
+  * @param  DAC_Channel: the selected DAC channel. 
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Channel_1: DAC Channel1 selected
+  *     @arg DAC_Channel_2: DAC Channel2 selected
+  * @param  NewState: new state of the selected DAC channel DMA request.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(DAC_Channel));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected DAC channel DMA request */
+    DAC->CR |= (DAC_CR_DMAEN1 << DAC_Channel);
+  }
+  else
+  {
+    /* Disable the selected DAC channel DMA request */
+    DAC->CR &= ~(DAC_CR_DMAEN1 << DAC_Channel);
+  }
+}
+
+/**
+  * @brief  Enables or disables the selected DAC channel software trigger.
+  * @param  DAC_Channel: the selected DAC channel. 
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Channel_1: DAC Channel1 selected
+  *     @arg DAC_Channel_2: DAC Channel2 selected
+  * @param  NewState: new state of the selected DAC channel software trigger.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(DAC_Channel));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable software trigger for the selected DAC channel */
+    DAC->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4);
+  }
+  else
+  {
+    /* Disable software trigger for the selected DAC channel */
+    DAC->SWTRIGR &= ~((uint32_t)DAC_SWTRIGR_SWTRIG1 << (DAC_Channel >> 4));
+  }
+}
+
+/**
+  * @brief  Enables or disables simultaneously the two DAC channels software
+  *   triggers.
+  * @param  NewState: new state of the DAC channels software triggers.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void DAC_DualSoftwareTriggerCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable software trigger for both DAC channels */
+    DAC->SWTRIGR |= DUAL_SWTRIG_SET ;
+  }
+  else
+  {
+    /* Disable software trigger for both DAC channels */
+    DAC->SWTRIGR &= DUAL_SWTRIG_RESET;
+  }
+}
+
+/**
+  * @brief  Enables or disables the selected DAC channel wave generation.
+  * @param  DAC_Channel: the selected DAC channel. 
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Channel_1: DAC Channel1 selected
+  *     @arg DAC_Channel_2: DAC Channel2 selected
+  * @param  DAC_Wave: Specifies the wave type to enable or disable.
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Wave_Noise: noise wave generation
+  *     @arg DAC_Wave_Triangle: triangle wave generation
+  * @param  NewState: new state of the selected DAC channel wave generation.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(DAC_Channel));
+  assert_param(IS_DAC_WAVE(DAC_Wave)); 
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected wave generation for the selected DAC channel */
+    DAC->CR |= DAC_Wave << DAC_Channel;
+  }
+  else
+  {
+    /* Disable the selected wave generation for the selected DAC channel */
+    DAC->CR &= ~(DAC_Wave << DAC_Channel);
+  }
+}
+
+/**
+  * @brief  Set the specified data holding register value for DAC channel1.
+  * @param  DAC_Align: Specifies the data alignment for DAC channel1.
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Align_8b_R: 8bit right data alignment selected
+  *     @arg DAC_Align_12b_L: 12bit left data alignment selected
+  *     @arg DAC_Align_12b_R: 12bit right data alignment selected
+  * @param  Data : Data to be loaded in the selected data holding register.
+  * @retval None
+  */
+void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
+{  
+  __IO uint32_t tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_DAC_ALIGN(DAC_Align));
+  assert_param(IS_DAC_DATA(Data));
+  
+  tmp = (uint32_t)DAC_BASE; 
+  tmp += DHR12R1_OFFSET + DAC_Align;
+
+  /* Set the DAC channel1 selected data holding register */
+  *(__IO uint32_t *) tmp = Data;
+}
+
+/**
+  * @brief  Set the specified data holding register value for DAC channel2.
+  * @param  DAC_Align: Specifies the data alignment for DAC channel2.
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Align_8b_R: 8bit right data alignment selected
+  *     @arg DAC_Align_12b_L: 12bit left data alignment selected
+  *     @arg DAC_Align_12b_R: 12bit right data alignment selected
+  * @param  Data : Data to be loaded in the selected data holding register.
+  * @retval None
+  */
+void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
+{
+  __IO uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_DAC_ALIGN(DAC_Align));
+  assert_param(IS_DAC_DATA(Data));
+  
+  tmp = (uint32_t)DAC_BASE;
+  tmp += DHR12R2_OFFSET + DAC_Align;
+
+  /* Set the DAC channel2 selected data holding register */
+  *(__IO uint32_t *)tmp = Data;
+}
+
+/**
+  * @brief  Set the specified data holding register value for dual channel
+  *   DAC.
+  * @param  DAC_Align: Specifies the data alignment for dual channel DAC.
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Align_8b_R: 8bit right data alignment selected
+  *     @arg DAC_Align_12b_L: 12bit left data alignment selected
+  *     @arg DAC_Align_12b_R: 12bit right data alignment selected
+  * @param  Data2: Data for DAC Channel2 to be loaded in the selected data 
+  *   holding register.
+  * @param  Data1: Data for DAC Channel1 to be loaded in the selected data 
+  *   holding register.
+  * @retval None
+  */
+void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
+{
+  uint32_t data = 0, tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_DAC_ALIGN(DAC_Align));
+  assert_param(IS_DAC_DATA(Data1));
+  assert_param(IS_DAC_DATA(Data2));
+  
+  /* Calculate and set dual DAC data holding register value */
+  if (DAC_Align == DAC_Align_8b_R)
+  {
+    data = ((uint32_t)Data2 << 8) | Data1; 
+  }
+  else
+  {
+    data = ((uint32_t)Data2 << 16) | Data1;
+  }
+  
+  tmp = (uint32_t)DAC_BASE;
+  tmp += DHR12RD_OFFSET + DAC_Align;
+
+  /* Set the dual DAC selected data holding register */
+  *(__IO uint32_t *)tmp = data;
+}
+
+/**
+  * @brief  Returns the last data output value of the selected DAC channel.
+  * @param  DAC_Channel: the selected DAC channel. 
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Channel_1: DAC Channel1 selected
+  *     @arg DAC_Channel_2: DAC Channel2 selected
+  * @retval The selected DAC channel data output value.
+  */
+uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel)
+{
+  __IO uint32_t tmp = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(DAC_Channel));
+  
+  tmp = (uint32_t) DAC_BASE ;
+  tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2);
+  
+  /* Returns the DAC channel data output register value */
+  return (uint16_t) (*(__IO uint32_t*) tmp);
+}
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/**
+  * @brief  Checks whether the specified DAC flag is set or not.
+  * @param  DAC_Channel: thee selected DAC channel. 
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Channel_1: DAC Channel1 selected
+  *     @arg DAC_Channel_2: DAC Channel2 selected
+  * @param  DAC_FLAG: specifies the flag to check. 
+  *   This parameter can be only of the following value:
+  *     @arg DAC_FLAG_DMAUDR: DMA underrun flag                                                 
+  * @retval The new state of DAC_FLAG (SET or RESET).
+  */
+FlagStatus DAC_GetFlagStatus(uint32_t DAC_Channel, uint32_t DAC_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(DAC_Channel));
+  assert_param(IS_DAC_FLAG(DAC_FLAG));
+
+  /* Check the status of the specified DAC flag */
+  if ((DAC->SR & (DAC_FLAG << DAC_Channel)) != (uint8_t)RESET)
+  {
+    /* DAC_FLAG is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* DAC_FLAG is reset */
+    bitstatus = RESET;
+  }
+  /* Return the DAC_FLAG status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the DAC channelx's pending flags.
+  * @param  DAC_Channel: the selected DAC channel. 
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Channel_1: DAC Channel1 selected
+  *     @arg DAC_Channel_2: DAC Channel2 selected
+  * @param  DAC_FLAG: specifies the flag to clear. 
+  *   This parameter can be of the following value:
+  *     @arg DAC_FLAG_DMAUDR: DMA underrun flag                           
+  * @retval None
+  */
+void DAC_ClearFlag(uint32_t DAC_Channel, uint32_t DAC_FLAG)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(DAC_Channel));
+  assert_param(IS_DAC_FLAG(DAC_FLAG));
+
+  /* Clear the selected DAC flags */
+  DAC->SR = (DAC_FLAG << DAC_Channel);
+}
+
+/**
+  * @brief  Checks whether the specified DAC interrupt has occurred or not.
+  * @param  DAC_Channel: the selected DAC channel. 
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Channel_1: DAC Channel1 selected
+  *     @arg DAC_Channel_2: DAC Channel2 selected
+  * @param  DAC_IT: specifies the DAC interrupt source to check. 
+  *   This parameter can be the following values:
+  *     @arg DAC_IT_DMAUDR: DMA underrun interrupt mask                       
+  * @retval The new state of DAC_IT (SET or RESET).
+  */
+ITStatus DAC_GetITStatus(uint32_t DAC_Channel, uint32_t DAC_IT)
+{
+  ITStatus bitstatus = RESET;
+  uint32_t enablestatus = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(DAC_Channel));
+  assert_param(IS_DAC_IT(DAC_IT));
+
+  /* Get the DAC_IT enable bit status */
+  enablestatus = (DAC->CR & (DAC_IT << DAC_Channel)) ;
+  
+  /* Check the status of the specified DAC interrupt */
+  if (((DAC->SR & (DAC_IT << DAC_Channel)) != (uint32_t)RESET) && enablestatus)
+  {
+    /* DAC_IT is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* DAC_IT is reset */
+    bitstatus = RESET;
+  }
+  /* Return the DAC_IT status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the DAC channelx's interrupt pending bits.
+  * @param  DAC_Channel: the selected DAC channel. 
+  *   This parameter can be one of the following values:
+  *     @arg DAC_Channel_1: DAC Channel1 selected
+  *     @arg DAC_Channel_2: DAC Channel2 selected
+  * @param  DAC_IT: specifies the DAC interrupt pending bit to clear.
+  *   This parameter can be the following values:
+  *     @arg DAC_IT_DMAUDR: DMA underrun interrupt mask                         
+  * @retval None
+  */
+void DAC_ClearITPendingBit(uint32_t DAC_Channel, uint32_t DAC_IT)
+{
+  /* Check the parameters */
+  assert_param(IS_DAC_CHANNEL(DAC_Channel));
+  assert_param(IS_DAC_IT(DAC_IT)); 
+
+  /* Clear the selected DAC interrupt pending bits */
+  DAC->SR = (DAC_IT << DAC_Channel);
+}
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_dbgmcu.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_dbgmcu.c
new file mode 100644
index 0000000000000000000000000000000000000000..d34307b05821b7484a8ef1dc2f87f8c4e035e436
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_dbgmcu.c
@@ -0,0 +1,162 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_dbgmcu.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the DBGMCU firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dbgmcu.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup DBGMCU 
+  * @brief DBGMCU driver modules
+  * @{
+  */ 
+
+/** @defgroup DBGMCU_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DBGMCU_Private_Defines
+  * @{
+  */
+
+#define IDCODE_DEVID_MASK    ((uint32_t)0x00000FFF)
+/**
+  * @}
+  */
+
+/** @defgroup DBGMCU_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DBGMCU_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DBGMCU_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DBGMCU_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Returns the device revision identifier.
+  * @param  None
+  * @retval Device revision identifier
+  */
+uint32_t DBGMCU_GetREVID(void)
+{
+   return(DBGMCU->IDCODE >> 16);
+}
+
+/**
+  * @brief  Returns the device identifier.
+  * @param  None
+  * @retval Device identifier
+  */
+uint32_t DBGMCU_GetDEVID(void)
+{
+   return(DBGMCU->IDCODE & IDCODE_DEVID_MASK);
+}
+
+/**
+  * @brief  Configures the specified peripheral and low power mode behavior
+  *   when the MCU under Debug mode.
+  * @param  DBGMCU_Periph: specifies the peripheral and low power mode.
+  *   This parameter can be any combination of the following values:
+  *     @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode              
+  *     @arg DBGMCU_STOP: Keep debugger connection during STOP mode               
+  *     @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode            
+  *     @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted          
+  *     @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted          
+  *     @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted          
+  *     @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted          
+  *     @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted          
+  *     @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted          
+  *     @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted           
+  *     @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted
+  *     @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted
+  *     @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted          
+  *     @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted          
+  *     @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted          
+  *     @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted
+  *     @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted 
+  *     @arg DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted
+  *     @arg DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted
+  *     @arg DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted                
+  *     @arg DBGMCU_TIM9_STOP: TIM9 counter stopped when Core is halted
+  *     @arg DBGMCU_TIM10_STOP: TIM10 counter stopped when Core is halted
+  *     @arg DBGMCU_TIM11_STOP: TIM11 counter stopped when Core is halted
+  *     @arg DBGMCU_TIM12_STOP: TIM12 counter stopped when Core is halted
+  *     @arg DBGMCU_TIM13_STOP: TIM13 counter stopped when Core is halted
+  *     @arg DBGMCU_TIM14_STOP: TIM14 counter stopped when Core is halted
+  * @param  NewState: new state of the specified peripheral in Debug mode.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  if (NewState != DISABLE)
+  {
+    DBGMCU->CR |= DBGMCU_Periph;
+  }
+  else
+  {
+    DBGMCU->CR &= ~DBGMCU_Periph;
+  }
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_dma.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_dma.c
new file mode 100644
index 0000000000000000000000000000000000000000..0c86f9018b0966bd20fd92907211b9f74c325320
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_dma.c
@@ -0,0 +1,714 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_dma.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the DMA firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_dma.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup DMA 
+  * @brief DMA driver modules
+  * @{
+  */ 
+
+/** @defgroup DMA_Private_TypesDefinitions
+  * @{
+  */ 
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Private_Defines
+  * @{
+  */
+
+
+/* DMA1 Channelx interrupt pending bit masks */
+#define DMA1_Channel1_IT_Mask    ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1))
+#define DMA1_Channel2_IT_Mask    ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2))
+#define DMA1_Channel3_IT_Mask    ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3))
+#define DMA1_Channel4_IT_Mask    ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4))
+#define DMA1_Channel5_IT_Mask    ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5))
+#define DMA1_Channel6_IT_Mask    ((uint32_t)(DMA_ISR_GIF6 | DMA_ISR_TCIF6 | DMA_ISR_HTIF6 | DMA_ISR_TEIF6))
+#define DMA1_Channel7_IT_Mask    ((uint32_t)(DMA_ISR_GIF7 | DMA_ISR_TCIF7 | DMA_ISR_HTIF7 | DMA_ISR_TEIF7))
+
+/* DMA2 Channelx interrupt pending bit masks */
+#define DMA2_Channel1_IT_Mask    ((uint32_t)(DMA_ISR_GIF1 | DMA_ISR_TCIF1 | DMA_ISR_HTIF1 | DMA_ISR_TEIF1))
+#define DMA2_Channel2_IT_Mask    ((uint32_t)(DMA_ISR_GIF2 | DMA_ISR_TCIF2 | DMA_ISR_HTIF2 | DMA_ISR_TEIF2))
+#define DMA2_Channel3_IT_Mask    ((uint32_t)(DMA_ISR_GIF3 | DMA_ISR_TCIF3 | DMA_ISR_HTIF3 | DMA_ISR_TEIF3))
+#define DMA2_Channel4_IT_Mask    ((uint32_t)(DMA_ISR_GIF4 | DMA_ISR_TCIF4 | DMA_ISR_HTIF4 | DMA_ISR_TEIF4))
+#define DMA2_Channel5_IT_Mask    ((uint32_t)(DMA_ISR_GIF5 | DMA_ISR_TCIF5 | DMA_ISR_HTIF5 | DMA_ISR_TEIF5))
+
+/* DMA2 FLAG mask */
+#define FLAG_Mask                ((uint32_t)0x10000000)
+
+/* DMA registers Masks */
+#define CCR_CLEAR_Mask           ((uint32_t)0xFFFF800F)
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup DMA_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the DMAy Channelx registers to their default reset
+  *         values.
+  * @param  DMAy_Channelx: where y can be 1 or 2 to select the DMA and
+  *   x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+  * @retval None
+  */
+void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+  
+  /* Disable the selected DMAy Channelx */
+  DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN);
+  
+  /* Reset DMAy Channelx control register */
+  DMAy_Channelx->CCR  = 0;
+  
+  /* Reset DMAy Channelx remaining bytes register */
+  DMAy_Channelx->CNDTR = 0;
+  
+  /* Reset DMAy Channelx peripheral address register */
+  DMAy_Channelx->CPAR  = 0;
+  
+  /* Reset DMAy Channelx memory address register */
+  DMAy_Channelx->CMAR = 0;
+  
+  if (DMAy_Channelx == DMA1_Channel1)
+  {
+    /* Reset interrupt pending bits for DMA1 Channel1 */
+    DMA1->IFCR |= DMA1_Channel1_IT_Mask;
+  }
+  else if (DMAy_Channelx == DMA1_Channel2)
+  {
+    /* Reset interrupt pending bits for DMA1 Channel2 */
+    DMA1->IFCR |= DMA1_Channel2_IT_Mask;
+  }
+  else if (DMAy_Channelx == DMA1_Channel3)
+  {
+    /* Reset interrupt pending bits for DMA1 Channel3 */
+    DMA1->IFCR |= DMA1_Channel3_IT_Mask;
+  }
+  else if (DMAy_Channelx == DMA1_Channel4)
+  {
+    /* Reset interrupt pending bits for DMA1 Channel4 */
+    DMA1->IFCR |= DMA1_Channel4_IT_Mask;
+  }
+  else if (DMAy_Channelx == DMA1_Channel5)
+  {
+    /* Reset interrupt pending bits for DMA1 Channel5 */
+    DMA1->IFCR |= DMA1_Channel5_IT_Mask;
+  }
+  else if (DMAy_Channelx == DMA1_Channel6)
+  {
+    /* Reset interrupt pending bits for DMA1 Channel6 */
+    DMA1->IFCR |= DMA1_Channel6_IT_Mask;
+  }
+  else if (DMAy_Channelx == DMA1_Channel7)
+  {
+    /* Reset interrupt pending bits for DMA1 Channel7 */
+    DMA1->IFCR |= DMA1_Channel7_IT_Mask;
+  }
+  else if (DMAy_Channelx == DMA2_Channel1)
+  {
+    /* Reset interrupt pending bits for DMA2 Channel1 */
+    DMA2->IFCR |= DMA2_Channel1_IT_Mask;
+  }
+  else if (DMAy_Channelx == DMA2_Channel2)
+  {
+    /* Reset interrupt pending bits for DMA2 Channel2 */
+    DMA2->IFCR |= DMA2_Channel2_IT_Mask;
+  }
+  else if (DMAy_Channelx == DMA2_Channel3)
+  {
+    /* Reset interrupt pending bits for DMA2 Channel3 */
+    DMA2->IFCR |= DMA2_Channel3_IT_Mask;
+  }
+  else if (DMAy_Channelx == DMA2_Channel4)
+  {
+    /* Reset interrupt pending bits for DMA2 Channel4 */
+    DMA2->IFCR |= DMA2_Channel4_IT_Mask;
+  }
+  else
+  { 
+    if (DMAy_Channelx == DMA2_Channel5)
+    {
+      /* Reset interrupt pending bits for DMA2 Channel5 */
+      DMA2->IFCR |= DMA2_Channel5_IT_Mask;
+    }
+  }
+}
+
+/**
+  * @brief  Initializes the DMAy Channelx according to the specified
+  *         parameters in the DMA_InitStruct.
+  * @param  DMAy_Channelx: where y can be 1 or 2 to select the DMA and 
+  *   x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+  * @param  DMA_InitStruct: pointer to a DMA_InitTypeDef structure that
+  *         contains the configuration information for the specified DMA Channel.
+  * @retval None
+  */
+void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+  assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR));
+  assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize));
+  assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc));
+  assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc));   
+  assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize));
+  assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize));
+  assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode));
+  assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority));
+  assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M));
+
+/*--------------------------- DMAy Channelx CCR Configuration -----------------*/
+  /* Get the DMAy_Channelx CCR value */
+  tmpreg = DMAy_Channelx->CCR;
+  /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */
+  tmpreg &= CCR_CLEAR_Mask;
+  /* Configure DMAy Channelx: data transfer, data size, priority level and mode */
+  /* Set DIR bit according to DMA_DIR value */
+  /* Set CIRC bit according to DMA_Mode value */
+  /* Set PINC bit according to DMA_PeripheralInc value */
+  /* Set MINC bit according to DMA_MemoryInc value */
+  /* Set PSIZE bits according to DMA_PeripheralDataSize value */
+  /* Set MSIZE bits according to DMA_MemoryDataSize value */
+  /* Set PL bits according to DMA_Priority value */
+  /* Set the MEM2MEM bit according to DMA_M2M value */
+  tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode |
+            DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc |
+            DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize |
+            DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M;
+
+  /* Write to DMAy Channelx CCR */
+  DMAy_Channelx->CCR = tmpreg;
+
+/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/
+  /* Write to DMAy Channelx CNDTR */
+  DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize;
+
+/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/
+  /* Write to DMAy Channelx CPAR */
+  DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr;
+
+/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/
+  /* Write to DMAy Channelx CMAR */
+  DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr;
+}
+
+/**
+  * @brief  Fills each DMA_InitStruct member with its default value.
+  * @param  DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will
+  *         be initialized.
+  * @retval None
+  */
+void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct)
+{
+/*-------------- Reset DMA init structure parameters values ------------------*/
+  /* Initialize the DMA_PeripheralBaseAddr member */
+  DMA_InitStruct->DMA_PeripheralBaseAddr = 0;
+  /* Initialize the DMA_MemoryBaseAddr member */
+  DMA_InitStruct->DMA_MemoryBaseAddr = 0;
+  /* Initialize the DMA_DIR member */
+  DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC;
+  /* Initialize the DMA_BufferSize member */
+  DMA_InitStruct->DMA_BufferSize = 0;
+  /* Initialize the DMA_PeripheralInc member */
+  DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable;
+  /* Initialize the DMA_MemoryInc member */
+  DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable;
+  /* Initialize the DMA_PeripheralDataSize member */
+  DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte;
+  /* Initialize the DMA_MemoryDataSize member */
+  DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte;
+  /* Initialize the DMA_Mode member */
+  DMA_InitStruct->DMA_Mode = DMA_Mode_Normal;
+  /* Initialize the DMA_Priority member */
+  DMA_InitStruct->DMA_Priority = DMA_Priority_Low;
+  /* Initialize the DMA_M2M member */
+  DMA_InitStruct->DMA_M2M = DMA_M2M_Disable;
+}
+
+/**
+  * @brief  Enables or disables the specified DMAy Channelx.
+  * @param  DMAy_Channelx: where y can be 1 or 2 to select the DMA and 
+  *   x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+  * @param  NewState: new state of the DMAy Channelx. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected DMAy Channelx */
+    DMAy_Channelx->CCR |= DMA_CCR1_EN;
+  }
+  else
+  {
+    /* Disable the selected DMAy Channelx */
+    DMAy_Channelx->CCR &= (uint16_t)(~DMA_CCR1_EN);
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified DMAy Channelx interrupts.
+  * @param  DMAy_Channelx: where y can be 1 or 2 to select the DMA and 
+  *   x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+  * @param  DMA_IT: specifies the DMA interrupts sources to be enabled
+  *   or disabled. 
+  *   This parameter can be any combination of the following values:
+  *     @arg DMA_IT_TC:  Transfer complete interrupt mask
+  *     @arg DMA_IT_HT:  Half transfer interrupt mask
+  *     @arg DMA_IT_TE:  Transfer error interrupt mask
+  * @param  NewState: new state of the specified DMA interrupts.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+  assert_param(IS_DMA_CONFIG_IT(DMA_IT));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected DMA interrupts */
+    DMAy_Channelx->CCR |= DMA_IT;
+  }
+  else
+  {
+    /* Disable the selected DMA interrupts */
+    DMAy_Channelx->CCR &= ~DMA_IT;
+  }
+}
+
+/**
+  * @brief  Sets the number of data units in the current DMAy Channelx transfer.
+  * @param  DMAy_Channelx: where y can be 1 or 2 to select the DMA and 
+  *         x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+  * @param  DataNumber: The number of data units in the current DMAy Channelx
+  *         transfer.   
+  * @note   This function can only be used when the DMAy_Channelx is disabled.                 
+  * @retval None.
+  */
+void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+  
+/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/
+  /* Write to DMAy Channelx CNDTR */
+  DMAy_Channelx->CNDTR = DataNumber;  
+}
+
+/**
+  * @brief  Returns the number of remaining data units in the current
+  *         DMAy Channelx transfer.
+  * @param  DMAy_Channelx: where y can be 1 or 2 to select the DMA and 
+  *   x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
+  * @retval The number of remaining data units in the current DMAy Channelx
+  *         transfer.
+  */
+uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx));
+  /* Return the number of remaining data units for DMAy Channelx */
+  return ((uint16_t)(DMAy_Channelx->CNDTR));
+}
+
+/**
+  * @brief  Checks whether the specified DMAy Channelx flag is set or not.
+  * @param  DMAy_FLAG: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
+  *     @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
+  *     @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
+  *     @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
+  *     @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag.
+  *     @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
+  *     @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
+  *     @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
+  *     @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag.
+  *     @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
+  *     @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
+  *     @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
+  *     @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag.
+  *     @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
+  *     @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
+  *     @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
+  *     @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag.
+  *     @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
+  *     @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
+  *     @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
+  *     @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag.
+  *     @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
+  *     @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
+  *     @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
+  *     @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag.
+  *     @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
+  *     @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
+  *     @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
+  *     @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag.
+  *     @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
+  *     @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
+  *     @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
+  *     @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag.
+  *     @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
+  *     @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
+  *     @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
+  *     @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag.
+  *     @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
+  *     @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
+  *     @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
+  *     @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag.
+  *     @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
+  *     @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
+  *     @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
+  *     @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag.
+  *     @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
+  *     @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
+  *     @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
+  * @retval The new state of DMAy_FLAG (SET or RESET).
+  */
+FlagStatus DMA_GetFlagStatus(uint32_t DMAy_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_DMA_GET_FLAG(DMAy_FLAG));
+
+  /* Calculate the used DMAy */
+  if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
+  {
+    /* Get DMA2 ISR register value */
+    tmpreg = DMA2->ISR ;
+  }
+  else
+  {
+    /* Get DMA1 ISR register value */
+    tmpreg = DMA1->ISR ;
+  }
+
+  /* Check the status of the specified DMAy flag */
+  if ((tmpreg & DMAy_FLAG) != (uint32_t)RESET)
+  {
+    /* DMAy_FLAG is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* DMAy_FLAG is reset */
+    bitstatus = RESET;
+  }
+  
+  /* Return the DMAy_FLAG status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the DMAy Channelx's pending flags.
+  * @param  DMAy_FLAG: specifies the flag to clear.
+  *   This parameter can be any combination (for the same DMA) of the following values:
+  *     @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag.
+  *     @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag.
+  *     @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag.
+  *     @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag.
+  *     @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag.
+  *     @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag.
+  *     @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag.
+  *     @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag.
+  *     @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag.
+  *     @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag.
+  *     @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag.
+  *     @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag.
+  *     @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag.
+  *     @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag.
+  *     @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag.
+  *     @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag.
+  *     @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag.
+  *     @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag.
+  *     @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag.
+  *     @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag.
+  *     @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag.
+  *     @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag.
+  *     @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag.
+  *     @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag.
+  *     @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag.
+  *     @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag.
+  *     @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag.
+  *     @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag.
+  *     @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag.
+  *     @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag.
+  *     @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag.
+  *     @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag.
+  *     @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag.
+  *     @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag.
+  *     @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag.
+  *     @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag.
+  *     @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag.
+  *     @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag.
+  *     @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag.
+  *     @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag.
+  *     @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag.
+  *     @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag.
+  *     @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag.
+  *     @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag.
+  *     @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag.
+  *     @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag.
+  *     @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag.
+  *     @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag.
+  * @retval None
+  */
+void DMA_ClearFlag(uint32_t DMAy_FLAG)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_CLEAR_FLAG(DMAy_FLAG));
+
+  /* Calculate the used DMAy */
+  if ((DMAy_FLAG & FLAG_Mask) != (uint32_t)RESET)
+  {
+    /* Clear the selected DMAy flags */
+    DMA2->IFCR = DMAy_FLAG;
+  }
+  else
+  {
+    /* Clear the selected DMAy flags */
+    DMA1->IFCR = DMAy_FLAG;
+  }
+}
+
+/**
+  * @brief  Checks whether the specified DMAy Channelx interrupt has occurred or not.
+  * @param  DMAy_IT: specifies the DMAy interrupt source to check. 
+  *   This parameter can be one of the following values:
+  *     @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
+  *     @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
+  *     @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
+  *     @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
+  *     @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt.
+  *     @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
+  *     @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
+  *     @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
+  *     @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt.
+  *     @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
+  *     @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
+  *     @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
+  *     @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt.
+  *     @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
+  *     @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
+  *     @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
+  *     @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt.
+  *     @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
+  *     @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
+  *     @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
+  *     @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt.
+  *     @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
+  *     @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
+  *     @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
+  *     @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt.
+  *     @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
+  *     @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
+  *     @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
+  *     @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt.
+  *     @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
+  *     @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
+  *     @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
+  *     @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt.
+  *     @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
+  *     @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
+  *     @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
+  *     @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt.
+  *     @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
+  *     @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
+  *     @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
+  *     @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt.
+  *     @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
+  *     @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
+  *     @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
+  *     @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt.
+  *     @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
+  *     @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
+  *     @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
+  * @retval The new state of DMAy_IT (SET or RESET).
+  */
+ITStatus DMA_GetITStatus(uint32_t DMAy_IT)
+{
+  ITStatus bitstatus = RESET;
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_DMA_GET_IT(DMAy_IT));
+
+  /* Calculate the used DMA */
+  if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
+  {
+    /* Get DMA2 ISR register value */
+    tmpreg = DMA2->ISR;
+  }
+  else
+  {
+    /* Get DMA1 ISR register value */
+    tmpreg = DMA1->ISR;
+  }
+
+  /* Check the status of the specified DMAy interrupt */
+  if ((tmpreg & DMAy_IT) != (uint32_t)RESET)
+  {
+    /* DMAy_IT is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* DMAy_IT is reset */
+    bitstatus = RESET;
+  }
+  /* Return the DMA_IT status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the DMAy Channelx's interrupt pending bits.
+  * @param  DMAy_IT: specifies the DMAy interrupt pending bit to clear.
+  *   This parameter can be any combination (for the same DMA) of the following values:
+  *     @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt.
+  *     @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt.
+  *     @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt.
+  *     @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt.
+  *     @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt.
+  *     @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt.
+  *     @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt.
+  *     @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt.
+  *     @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt.
+  *     @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt.
+  *     @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt.
+  *     @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt.
+  *     @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt.
+  *     @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt.
+  *     @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt.
+  *     @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt.
+  *     @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt.
+  *     @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt.
+  *     @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt.
+  *     @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt.
+  *     @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt.
+  *     @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt.
+  *     @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt.
+  *     @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt.
+  *     @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt.
+  *     @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt.
+  *     @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt.
+  *     @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt.
+  *     @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt.
+  *     @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt.
+  *     @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt.
+  *     @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt.
+  *     @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt.
+  *     @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt.
+  *     @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt.
+  *     @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt.
+  *     @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt.
+  *     @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt.
+  *     @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt.
+  *     @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt.
+  *     @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt.
+  *     @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt.
+  *     @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt.
+  *     @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt.
+  *     @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt.
+  *     @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt.
+  *     @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt.
+  *     @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt.
+  * @retval None
+  */
+void DMA_ClearITPendingBit(uint32_t DMAy_IT)
+{
+  /* Check the parameters */
+  assert_param(IS_DMA_CLEAR_IT(DMAy_IT));
+
+  /* Calculate the used DMAy */
+  if ((DMAy_IT & FLAG_Mask) != (uint32_t)RESET)
+  {
+    /* Clear the selected DMAy interrupt pending bits */
+    DMA2->IFCR = DMAy_IT;
+  }
+  else
+  {
+    /* Clear the selected DMAy interrupt pending bits */
+    DMA1->IFCR = DMAy_IT;
+  }
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_exti.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_exti.c
new file mode 100644
index 0000000000000000000000000000000000000000..ab7346276cdeaebc3a0aeb3792334ed1ffb8257c
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_exti.c
@@ -0,0 +1,269 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_exti.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the EXTI firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_exti.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup EXTI 
+  * @brief EXTI driver modules
+  * @{
+  */
+
+/** @defgroup EXTI_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Private_Defines
+  * @{
+  */
+
+#define EXTI_LINENONE    ((uint32_t)0x00000)  /* No interrupt selected */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup EXTI_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the EXTI peripheral registers to their default reset values.
+  * @param  None
+  * @retval None
+  */
+void EXTI_DeInit(void)
+{
+  EXTI->IMR = 0x00000000;
+  EXTI->EMR = 0x00000000;
+  EXTI->RTSR = 0x00000000; 
+  EXTI->FTSR = 0x00000000; 
+  EXTI->PR = 0x000FFFFF;
+}
+
+/**
+  * @brief  Initializes the EXTI peripheral according to the specified
+  *         parameters in the EXTI_InitStruct.
+  * @param  EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure
+  *         that contains the configuration information for the EXTI peripheral.
+  * @retval None
+  */
+void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct)
+{
+  uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode));
+  assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger));
+  assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line));  
+  assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd));
+
+  tmp = (uint32_t)EXTI_BASE;
+     
+  if (EXTI_InitStruct->EXTI_LineCmd != DISABLE)
+  {
+    /* Clear EXTI line configuration */
+    EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line;
+    EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line;
+    
+    tmp += EXTI_InitStruct->EXTI_Mode;
+
+    *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
+
+    /* Clear Rising Falling edge configuration */
+    EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line;
+    EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line;
+    
+    /* Select the trigger for the selected external interrupts */
+    if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling)
+    {
+      /* Rising Falling edge */
+      EXTI->RTSR |= EXTI_InitStruct->EXTI_Line;
+      EXTI->FTSR |= EXTI_InitStruct->EXTI_Line;
+    }
+    else
+    {
+      tmp = (uint32_t)EXTI_BASE;
+      tmp += EXTI_InitStruct->EXTI_Trigger;
+
+      *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line;
+    }
+  }
+  else
+  {
+    tmp += EXTI_InitStruct->EXTI_Mode;
+
+    /* Disable the selected external lines */
+    *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line;
+  }
+}
+
+/**
+  * @brief  Fills each EXTI_InitStruct member with its reset value.
+  * @param  EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will
+  *         be initialized.
+  * @retval None
+  */
+void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct)
+{
+  EXTI_InitStruct->EXTI_Line = EXTI_LINENONE;
+  EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt;
+  EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling;
+  EXTI_InitStruct->EXTI_LineCmd = DISABLE;
+}
+
+/**
+  * @brief  Generates a Software interrupt.
+  * @param  EXTI_Line: specifies the EXTI lines to be enabled or disabled.
+  *   This parameter can be any combination of EXTI_Linex where x can be (0..19).
+  * @retval None
+  */
+void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line)
+{
+  /* Check the parameters */
+  assert_param(IS_EXTI_LINE(EXTI_Line));
+  
+  EXTI->SWIER |= EXTI_Line;
+}
+
+/**
+  * @brief  Checks whether the specified EXTI line flag is set or not.
+  * @param  EXTI_Line: specifies the EXTI line flag to check.
+  *   This parameter can be:
+  *     @arg EXTI_Linex: External interrupt line x where x(0..19)
+  * @retval The new state of EXTI_Line (SET or RESET).
+  */
+FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_GET_EXTI_LINE(EXTI_Line));
+  
+  if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the EXTI's line pending flags.
+  * @param  EXTI_Line: specifies the EXTI lines flags to clear.
+  *   This parameter can be any combination of EXTI_Linex where x can be (0..19).
+  * @retval None
+  */
+void EXTI_ClearFlag(uint32_t EXTI_Line)
+{
+  /* Check the parameters */
+  assert_param(IS_EXTI_LINE(EXTI_Line));
+  
+  EXTI->PR = EXTI_Line;
+}
+
+/**
+  * @brief  Checks whether the specified EXTI line is asserted or not.
+  * @param  EXTI_Line: specifies the EXTI line to check.
+  *   This parameter can be:
+  *     @arg EXTI_Linex: External interrupt line x where x(0..19)
+  * @retval The new state of EXTI_Line (SET or RESET).
+  */
+ITStatus EXTI_GetITStatus(uint32_t EXTI_Line)
+{
+  ITStatus bitstatus = RESET;
+  uint32_t enablestatus = 0;
+  /* Check the parameters */
+  assert_param(IS_GET_EXTI_LINE(EXTI_Line));
+  
+  enablestatus =  EXTI->IMR & EXTI_Line;
+  if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET))
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the EXTI's line pending bits.
+  * @param  EXTI_Line: specifies the EXTI lines to clear.
+  *   This parameter can be any combination of EXTI_Linex where x can be (0..19).
+  * @retval None
+  */
+void EXTI_ClearITPendingBit(uint32_t EXTI_Line)
+{
+  /* Check the parameters */
+  assert_param(IS_EXTI_LINE(EXTI_Line));
+  
+  EXTI->PR = EXTI_Line;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_flash.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_flash.c
new file mode 100644
index 0000000000000000000000000000000000000000..f6c7bf172dba62f761303558fb921849f7642d33
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_flash.c
@@ -0,0 +1,1684 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_flash.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the FLASH firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_flash.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup FLASH 
+  * @brief FLASH driver modules
+  * @{
+  */ 
+
+/** @defgroup FLASH_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_Private_Defines
+  * @{
+  */ 
+
+/* Flash Access Control Register bits */
+#define ACR_LATENCY_Mask         ((uint32_t)0x00000038)
+#define ACR_HLFCYA_Mask          ((uint32_t)0xFFFFFFF7)
+#define ACR_PRFTBE_Mask          ((uint32_t)0xFFFFFFEF)
+
+/* Flash Access Control Register bits */
+#define ACR_PRFTBS_Mask          ((uint32_t)0x00000020) 
+
+/* Flash Control Register bits */
+#define CR_PG_Set                ((uint32_t)0x00000001)
+#define CR_PG_Reset              ((uint32_t)0x00001FFE) 
+#define CR_PER_Set               ((uint32_t)0x00000002)
+#define CR_PER_Reset             ((uint32_t)0x00001FFD)
+#define CR_MER_Set               ((uint32_t)0x00000004)
+#define CR_MER_Reset             ((uint32_t)0x00001FFB)
+#define CR_OPTPG_Set             ((uint32_t)0x00000010)
+#define CR_OPTPG_Reset           ((uint32_t)0x00001FEF)
+#define CR_OPTER_Set             ((uint32_t)0x00000020)
+#define CR_OPTER_Reset           ((uint32_t)0x00001FDF)
+#define CR_STRT_Set              ((uint32_t)0x00000040)
+#define CR_LOCK_Set              ((uint32_t)0x00000080)
+
+/* FLASH Mask */
+#define RDPRT_Mask               ((uint32_t)0x00000002)
+#define WRP0_Mask                ((uint32_t)0x000000FF)
+#define WRP1_Mask                ((uint32_t)0x0000FF00)
+#define WRP2_Mask                ((uint32_t)0x00FF0000)
+#define WRP3_Mask                ((uint32_t)0xFF000000)
+#define OB_USER_BFB2             ((uint16_t)0x0008)
+
+/* FLASH Keys */
+#define RDP_Key                  ((uint16_t)0x00A5)
+#define FLASH_KEY1               ((uint32_t)0x45670123)
+#define FLASH_KEY2               ((uint32_t)0xCDEF89AB)
+
+/* FLASH BANK address */
+#define FLASH_BANK1_END_ADDRESS   ((uint32_t)0x807FFFF)
+
+/* Delay definition */   
+#define EraseTimeout          ((uint32_t)0x000B0000)
+#define ProgramTimeout        ((uint32_t)0x00002000)
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+/** @defgroup FLASH_Private_FunctionPrototypes
+  * @{
+  */
+  
+/**
+  * @}
+  */
+
+/** @defgroup FLASH_Private_Functions
+  * @{
+  */
+
+/**
+@code  
+ 
+ This driver provides functions to configure and program the Flash memory of all STM32F10x devices,
+ including the latest STM32F10x_XL density devices. 
+
+ STM32F10x_XL devices feature up to 1 Mbyte with dual bank architecture for read-while-write (RWW) capability:
+    - bank1: fixed size of 512 Kbytes (256 pages of 2Kbytes each)
+    - bank2: up to 512 Kbytes (up to 256 pages of 2Kbytes each)
+ While other STM32F10x devices features only one bank with memory up to 512 Kbytes.
+
+ In version V3.3.0, some functions were updated and new ones were added to support
+ STM32F10x_XL devices. Thus some functions manages all devices, while other are 
+ dedicated for XL devices only.
+ 
+ The table below presents the list of available functions depending on the used STM32F10x devices.  
+      
+   ***************************************************
+   * Legacy functions used for all STM32F10x devices *
+   ***************************************************
+   +----------------------------------------------------------------------------------------------------------------------------------+
+   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
+   |                                    |   devices  |  devices      |                                                                |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_SetLatency                    |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_HalfCycleAccessCmd            |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_PrefetchBufferCmd             |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_Unlock                        |    Yes     |      Yes      | - For STM32F10X_XL devices: unlock Bank1 and Bank2.            |
+   |                                    |            |               | - For other devices: unlock Bank1 and it is equivalent         |
+   |                                    |            |               |   to FLASH_UnlockBank1 function.                               |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_Lock                          |    Yes     |      Yes      | - For STM32F10X_XL devices: lock Bank1 and Bank2.              |
+   |                                    |            |               | - For other devices: lock Bank1 and it is equivalent           |
+   |                                    |            |               |   to FLASH_LockBank1 function.                                 |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_ErasePage                     |    Yes     |      Yes      | - For STM32F10x_XL devices: erase a page in Bank1 and Bank2    |
+   |                                    |            |               | - For other devices: erase a page in Bank1                     |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_EraseAllPages                 |    Yes     |      Yes      | - For STM32F10x_XL devices: erase all pages in Bank1 and Bank2 |
+   |                                    |            |               | - For other devices: erase all pages in Bank1                  |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_EraseOptionBytes              |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_ProgramWord                   |    Yes     |      Yes      | Updated to program up to 1MByte (depending on the used device) |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_ProgramHalfWord               |    Yes     |      Yes      | Updated to program up to 1MByte (depending on the used device) |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_ProgramOptionByteData         |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_EnableWriteProtection         |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_ReadOutProtection             |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_UserOptionByteConfig          |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_GetUserOptionByte             |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_GetWriteProtectionOptionByte  |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_GetReadOutProtectionStatus    |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_GetPrefetchBufferStatus       |    Yes     |      Yes      | No change                                                      |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_ITConfig                      |    Yes     |      Yes      | - For STM32F10x_XL devices: enable Bank1 and Bank2's interrupts|
+   |                                    |            |               | - For other devices: enable Bank1's interrupts                 |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_GetFlagStatus                 |    Yes     |      Yes      | - For STM32F10x_XL devices: return Bank1 and Bank2's flag status|
+   |                                    |            |               | - For other devices: return Bank1's flag status                |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_ClearFlag                     |    Yes     |      Yes      | - For STM32F10x_XL devices: clear Bank1 and Bank2's flag       |
+   |                                    |            |               | - For other devices: clear Bank1's flag                        |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_GetStatus                     |    Yes     |      Yes      | - Return the status of Bank1 (for all devices)                 |
+   |                                    |            |               |   equivalent to FLASH_GetBank1Status function                  |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_WaitForLastOperation          |    Yes     |      Yes      | - Wait for Bank1 last operation (for all devices)              |
+   |                                    |            |               |   equivalent to: FLASH_WaitForLastBank1Operation function      |
+   +----------------------------------------------------------------------------------------------------------------------------------+
+
+   ************************************************************************************************************************
+   * New functions used for all STM32F10x devices to manage Bank1:                                                        *
+   *   - These functions are mainly useful for STM32F10x_XL density devices, to have separate control for Bank1 and bank2 *
+   *   - For other devices, these functions are optional (covered by functions listed above)                              *
+   ************************************************************************************************************************
+   +----------------------------------------------------------------------------------------------------------------------------------+
+   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
+   |                                    |   devices  |  devices      |                                                                |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   | FLASH_UnlockBank1                  |    Yes     |      Yes      | - Unlock Bank1                                                 |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_LockBank1                     |    Yes     |      Yes      | - Lock Bank1                                                   |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   | FLASH_EraseAllBank1Pages           |    Yes     |      Yes      | - Erase all pages in Bank1                                     |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   | FLASH_GetBank1Status               |    Yes     |      Yes      | - Return the status of Bank1                                   |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   | FLASH_WaitForLastBank1Operation    |    Yes     |      Yes      | - Wait for Bank1 last operation                                |
+   +----------------------------------------------------------------------------------------------------------------------------------+
+
+   *****************************************************************************
+   * New Functions used only with STM32F10x_XL density devices to manage Bank2 *
+   *****************************************************************************
+   +----------------------------------------------------------------------------------------------------------------------------------+
+   |       Functions prototypes         |STM32F10x_XL|Other STM32F10x|    Comments                                                    |
+   |                                    |   devices  |  devices      |                                                                |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   | FLASH_UnlockBank2                  |    Yes     |      No       | - Unlock Bank2                                                 |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   |FLASH_LockBank2                     |    Yes     |      No       | - Lock Bank2                                                   |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   | FLASH_EraseAllBank2Pages           |    Yes     |      No       | - Erase all pages in Bank2                                     |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   | FLASH_GetBank2Status               |    Yes     |      No       | - Return the status of Bank2                                   |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   | FLASH_WaitForLastBank2Operation    |    Yes     |      No       | - Wait for Bank2 last operation                                |
+   |----------------------------------------------------------------------------------------------------------------------------------|
+   | FLASH_BootConfig                   |    Yes     |      No       | - Configure to boot from Bank1 or Bank2                        |
+   +----------------------------------------------------------------------------------------------------------------------------------+
+@endcode
+*/
+
+
+/**
+  * @brief  Sets the code latency value.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  FLASH_Latency: specifies the FLASH Latency value.
+  *   This parameter can be one of the following values:
+  *     @arg FLASH_Latency_0: FLASH Zero Latency cycle
+  *     @arg FLASH_Latency_1: FLASH One Latency cycle
+  *     @arg FLASH_Latency_2: FLASH Two Latency cycles
+  * @retval None
+  */
+void FLASH_SetLatency(uint32_t FLASH_Latency)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_FLASH_LATENCY(FLASH_Latency));
+  
+  /* Read the ACR register */
+  tmpreg = FLASH->ACR;  
+  
+  /* Sets the Latency value */
+  tmpreg &= ACR_LATENCY_Mask;
+  tmpreg |= FLASH_Latency;
+  
+  /* Write the ACR register */
+  FLASH->ACR = tmpreg;
+}
+
+/**
+  * @brief  Enables or disables the Half cycle flash access.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode.
+  *   This parameter can be one of the following values:
+  *     @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable
+  *     @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable
+  * @retval None
+  */
+void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess));
+  
+  /* Enable or disable the Half cycle access */
+  FLASH->ACR &= ACR_HLFCYA_Mask;
+  FLASH->ACR |= FLASH_HalfCycleAccess;
+}
+
+/**
+  * @brief  Enables or disables the Prefetch Buffer.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  FLASH_PrefetchBuffer: specifies the Prefetch buffer status.
+  *   This parameter can be one of the following values:
+  *     @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable
+  *     @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable
+  * @retval None
+  */
+void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer)
+{
+  /* Check the parameters */
+  assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer));
+  
+  /* Enable or disable the Prefetch Buffer */
+  FLASH->ACR &= ACR_PRFTBE_Mask;
+  FLASH->ACR |= FLASH_PrefetchBuffer;
+}
+
+/**
+  * @brief  Unlocks the FLASH Program Erase Controller.
+  * @note   This function can be used for all STM32F10x devices.
+  *         - For STM32F10X_XL devices this function unlocks Bank1 and Bank2.
+  *         - For all other devices it unlocks Bank1 and it is equivalent 
+  *           to FLASH_UnlockBank1 function.. 
+  * @param  None
+  * @retval None
+  */
+void FLASH_Unlock(void)
+{
+  /* Authorize the FPEC of Bank1 Access */
+  FLASH->KEYR = FLASH_KEY1;
+  FLASH->KEYR = FLASH_KEY2;
+
+#ifdef STM32F10X_XL
+  /* Authorize the FPEC of Bank2 Access */
+  FLASH->KEYR2 = FLASH_KEY1;
+  FLASH->KEYR2 = FLASH_KEY2;
+#endif /* STM32F10X_XL */
+}
+/**
+  * @brief  Unlocks the FLASH Bank1 Program Erase Controller.
+  * @note   This function can be used for all STM32F10x devices.
+  *         - For STM32F10X_XL devices this function unlocks Bank1.
+  *         - For all other devices it unlocks Bank1 and it is 
+  *           equivalent to FLASH_Unlock function.
+  * @param  None
+  * @retval None
+  */
+void FLASH_UnlockBank1(void)
+{
+  /* Authorize the FPEC of Bank1 Access */
+  FLASH->KEYR = FLASH_KEY1;
+  FLASH->KEYR = FLASH_KEY2;
+}
+
+#ifdef STM32F10X_XL
+/**
+  * @brief  Unlocks the FLASH Bank2 Program Erase Controller.
+  * @note   This function can be used only for STM32F10X_XL density devices.
+  * @param  None
+  * @retval None
+  */
+void FLASH_UnlockBank2(void)
+{
+  /* Authorize the FPEC of Bank2 Access */
+  FLASH->KEYR2 = FLASH_KEY1;
+  FLASH->KEYR2 = FLASH_KEY2;
+
+}
+#endif /* STM32F10X_XL */
+
+/**
+  * @brief  Locks the FLASH Program Erase Controller.
+  * @note   This function can be used for all STM32F10x devices.
+  *         - For STM32F10X_XL devices this function Locks Bank1 and Bank2.
+  *         - For all other devices it Locks Bank1 and it is equivalent 
+  *           to FLASH_LockBank1 function.
+  * @param  None
+  * @retval None
+  */
+void FLASH_Lock(void)
+{
+  /* Set the Lock Bit to lock the FPEC and the CR of  Bank1 */
+  FLASH->CR |= CR_LOCK_Set;
+
+#ifdef STM32F10X_XL
+  /* Set the Lock Bit to lock the FPEC and the CR of  Bank2 */
+  FLASH->CR2 |= CR_LOCK_Set;
+#endif /* STM32F10X_XL */
+}
+
+/**
+  * @brief  Locks the FLASH Bank1 Program Erase Controller.
+  * @note   this function can be used for all STM32F10x devices.
+  *         - For STM32F10X_XL devices this function Locks Bank1.
+  *         - For all other devices it Locks Bank1 and it is equivalent 
+  *           to FLASH_Lock function.
+  * @param  None
+  * @retval None
+  */
+void FLASH_LockBank1(void)
+{
+  /* Set the Lock Bit to lock the FPEC and the CR of  Bank1 */
+  FLASH->CR |= CR_LOCK_Set;
+}
+
+#ifdef STM32F10X_XL
+/**
+  * @brief  Locks the FLASH Bank2 Program Erase Controller.
+  * @note   This function can be used only for STM32F10X_XL density devices.
+  * @param  None
+  * @retval None
+  */
+void FLASH_LockBank2(void)
+{
+  /* Set the Lock Bit to lock the FPEC and the CR of  Bank2 */
+  FLASH->CR2 |= CR_LOCK_Set;
+}
+#endif /* STM32F10X_XL */
+
+/**
+  * @brief  Erases a specified FLASH page.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  Page_Address: The page address to be erased.
+  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
+{
+  FLASH_Status status = FLASH_COMPLETE;
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Page_Address));
+
+#ifdef STM32F10X_XL
+  if(Page_Address < FLASH_BANK1_END_ADDRESS)  
+  {
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+    if(status == FLASH_COMPLETE)
+    { 
+      /* if the previous operation is completed, proceed to erase the page */
+      FLASH->CR|= CR_PER_Set;
+      FLASH->AR = Page_Address; 
+      FLASH->CR|= CR_STRT_Set;
+    
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+
+      /* Disable the PER Bit */
+      FLASH->CR &= CR_PER_Reset;
+    }
+  }
+  else
+  {
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+    if(status == FLASH_COMPLETE)
+    { 
+      /* if the previous operation is completed, proceed to erase the page */
+      FLASH->CR2|= CR_PER_Set;
+      FLASH->AR2 = Page_Address; 
+      FLASH->CR2|= CR_STRT_Set;
+    
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+      
+      /* Disable the PER Bit */
+      FLASH->CR2 &= CR_PER_Reset;
+    }
+  }
+#else
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation(EraseTimeout);
+  
+  if(status == FLASH_COMPLETE)
+  { 
+    /* if the previous operation is completed, proceed to erase the page */
+    FLASH->CR|= CR_PER_Set;
+    FLASH->AR = Page_Address; 
+    FLASH->CR|= CR_STRT_Set;
+    
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation(EraseTimeout);
+    
+    /* Disable the PER Bit */
+    FLASH->CR &= CR_PER_Reset;
+  }
+#endif /* STM32F10X_XL */
+
+  /* Return the Erase Status */
+  return status;
+}
+
+/**
+  * @brief  Erases all FLASH pages.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  None
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_EraseAllPages(void)
+{
+  FLASH_Status status = FLASH_COMPLETE;
+
+#ifdef STM32F10X_XL
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+  
+  if(status == FLASH_COMPLETE)
+  {
+    /* if the previous operation is completed, proceed to erase all pages */
+     FLASH->CR |= CR_MER_Set;
+     FLASH->CR |= CR_STRT_Set;
+    
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+    
+    /* Disable the MER Bit */
+    FLASH->CR &= CR_MER_Reset;
+  }    
+  if(status == FLASH_COMPLETE)
+  {
+    /* if the previous operation is completed, proceed to erase all pages */
+     FLASH->CR2 |= CR_MER_Set;
+     FLASH->CR2 |= CR_STRT_Set;
+    
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+    
+    /* Disable the MER Bit */
+    FLASH->CR2 &= CR_MER_Reset;
+  }
+#else
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation(EraseTimeout);
+  if(status == FLASH_COMPLETE)
+  {
+    /* if the previous operation is completed, proceed to erase all pages */
+     FLASH->CR |= CR_MER_Set;
+     FLASH->CR |= CR_STRT_Set;
+    
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation(EraseTimeout);
+
+    /* Disable the MER Bit */
+    FLASH->CR &= CR_MER_Reset;
+  }
+#endif /* STM32F10X_XL */
+
+  /* Return the Erase Status */
+  return status;
+}
+
+/**
+  * @brief  Erases all Bank1 FLASH pages.
+  * @note   This function can be used for all STM32F10x devices.
+  *         - For STM32F10X_XL devices this function erases all Bank1 pages.
+  *         - For all other devices it erases all Bank1 pages and it is equivalent 
+  *           to FLASH_EraseAllPages function.
+  * @param  None
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_EraseAllBank1Pages(void)
+{
+  FLASH_Status status = FLASH_COMPLETE;
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+  
+  if(status == FLASH_COMPLETE)
+  {
+    /* if the previous operation is completed, proceed to erase all pages */
+     FLASH->CR |= CR_MER_Set;
+     FLASH->CR |= CR_STRT_Set;
+    
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastBank1Operation(EraseTimeout);
+    
+    /* Disable the MER Bit */
+    FLASH->CR &= CR_MER_Reset;
+  }    
+  /* Return the Erase Status */
+  return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+  * @brief  Erases all Bank2 FLASH pages.
+  * @note   This function can be used only for STM32F10x_XL density devices.
+  * @param  None
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_EraseAllBank2Pages(void)
+{
+  FLASH_Status status = FLASH_COMPLETE;
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+  
+  if(status == FLASH_COMPLETE)
+  {
+    /* if the previous operation is completed, proceed to erase all pages */
+     FLASH->CR2 |= CR_MER_Set;
+     FLASH->CR2 |= CR_STRT_Set;
+    
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastBank2Operation(EraseTimeout);
+
+    /* Disable the MER Bit */
+    FLASH->CR2 &= CR_MER_Reset;
+  }    
+  /* Return the Erase Status */
+  return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+  * @brief  Erases the FLASH option bytes.
+  * @note   This functions erases all option bytes except the Read protection (RDP). 
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  None
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_EraseOptionBytes(void)
+{
+  uint16_t rdptmp = RDP_Key;
+
+  FLASH_Status status = FLASH_COMPLETE;
+
+  /* Get the actual read protection Option Byte value */ 
+  if(FLASH_GetReadOutProtectionStatus() != RESET)
+  {
+    rdptmp = 0x00;  
+  }
+
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation(EraseTimeout);
+  if(status == FLASH_COMPLETE)
+  {
+    /* Authorize the small information block programming */
+    FLASH->OPTKEYR = FLASH_KEY1;
+    FLASH->OPTKEYR = FLASH_KEY2;
+    
+    /* if the previous operation is completed, proceed to erase the option bytes */
+    FLASH->CR |= CR_OPTER_Set;
+    FLASH->CR |= CR_STRT_Set;
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation(EraseTimeout);
+    
+    if(status == FLASH_COMPLETE)
+    {
+      /* if the erase operation is completed, disable the OPTER Bit */
+      FLASH->CR &= CR_OPTER_Reset;
+       
+      /* Enable the Option Bytes Programming operation */
+      FLASH->CR |= CR_OPTPG_Set;
+      /* Restore the last read protection Option Byte value */
+      OB->RDP = (uint16_t)rdptmp; 
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation(ProgramTimeout);
+ 
+      if(status != FLASH_TIMEOUT)
+      {
+        /* if the program operation is completed, disable the OPTPG Bit */
+        FLASH->CR &= CR_OPTPG_Reset;
+      }
+    }
+    else
+    {
+      if (status != FLASH_TIMEOUT)
+      {
+        /* Disable the OPTPG Bit */
+        FLASH->CR &= CR_OPTPG_Reset;
+      }
+    }  
+  }
+  /* Return the erase status */
+  return status;
+}
+
+/**
+  * @brief  Programs a word at a specified address.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  Address: specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed.
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. 
+  */
+FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data)
+{
+  FLASH_Status status = FLASH_COMPLETE;
+  __IO uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+
+#ifdef STM32F10X_XL
+  if(Address < FLASH_BANK1_END_ADDRESS - 2)
+  { 
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastBank1Operation(ProgramTimeout); 
+    if(status == FLASH_COMPLETE)
+    {
+      /* if the previous operation is completed, proceed to program the new first 
+        half word */
+      FLASH->CR |= CR_PG_Set;
+  
+      *(__IO uint16_t*)Address = (uint16_t)Data;
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation(ProgramTimeout);
+ 
+      if(status == FLASH_COMPLETE)
+      {
+        /* if the previous operation is completed, proceed to program the new second 
+        half word */
+        tmp = Address + 2;
+
+        *(__IO uint16_t*) tmp = Data >> 16;
+    
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastOperation(ProgramTimeout);
+        
+        /* Disable the PG Bit */
+        FLASH->CR &= CR_PG_Reset;
+      }
+      else
+      {
+        /* Disable the PG Bit */
+        FLASH->CR &= CR_PG_Reset;
+       }
+    }
+  }
+  else if(Address == (FLASH_BANK1_END_ADDRESS - 1))
+  {
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+    if(status == FLASH_COMPLETE)
+    {
+      /* if the previous operation is completed, proceed to program the new first 
+        half word */
+      FLASH->CR |= CR_PG_Set;
+  
+      *(__IO uint16_t*)Address = (uint16_t)Data;
+
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+      
+	  /* Disable the PG Bit */
+      FLASH->CR &= CR_PG_Reset;
+    }
+    else
+    {
+      /* Disable the PG Bit */
+      FLASH->CR &= CR_PG_Reset;
+    }
+
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+    if(status == FLASH_COMPLETE)
+    {
+      /* if the previous operation is completed, proceed to program the new second 
+      half word */
+      FLASH->CR2 |= CR_PG_Set;
+      tmp = Address + 2;
+
+      *(__IO uint16_t*) tmp = Data >> 16;
+    
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+        
+      /* Disable the PG Bit */
+      FLASH->CR2 &= CR_PG_Reset;
+    }
+    else
+    {
+      /* Disable the PG Bit */
+      FLASH->CR2 &= CR_PG_Reset;
+    }
+  }
+  else
+  {
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+    if(status == FLASH_COMPLETE)
+    {
+      /* if the previous operation is completed, proceed to program the new first 
+        half word */
+      FLASH->CR2 |= CR_PG_Set;
+  
+      *(__IO uint16_t*)Address = (uint16_t)Data;
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+ 
+      if(status == FLASH_COMPLETE)
+      {
+        /* if the previous operation is completed, proceed to program the new second 
+        half word */
+        tmp = Address + 2;
+
+        *(__IO uint16_t*) tmp = Data >> 16;
+    
+        /* Wait for last operation to be completed */
+        status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+        
+        /* Disable the PG Bit */
+        FLASH->CR2 &= CR_PG_Reset;
+      }
+      else
+      {
+        /* Disable the PG Bit */
+        FLASH->CR2 &= CR_PG_Reset;
+      }
+    }
+  }
+#else
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation(ProgramTimeout);
+  
+  if(status == FLASH_COMPLETE)
+  {
+    /* if the previous operation is completed, proceed to program the new first 
+    half word */
+    FLASH->CR |= CR_PG_Set;
+  
+    *(__IO uint16_t*)Address = (uint16_t)Data;
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation(ProgramTimeout);
+ 
+    if(status == FLASH_COMPLETE)
+    {
+      /* if the previous operation is completed, proceed to program the new second 
+      half word */
+      tmp = Address + 2;
+
+      *(__IO uint16_t*) tmp = Data >> 16;
+    
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation(ProgramTimeout);
+        
+      /* Disable the PG Bit */
+      FLASH->CR &= CR_PG_Reset;
+    }
+    else
+    {
+      /* Disable the PG Bit */
+      FLASH->CR &= CR_PG_Reset;
+    }
+  }         
+#endif /* STM32F10X_XL */
+   
+  /* Return the Program Status */
+  return status;
+}
+
+/**
+  * @brief  Programs a half word at a specified address.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  Address: specifies the address to be programmed.
+  * @param  Data: specifies the data to be programmed.
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. 
+  */
+FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
+{
+  FLASH_Status status = FLASH_COMPLETE;
+  /* Check the parameters */
+  assert_param(IS_FLASH_ADDRESS(Address));
+
+#ifdef STM32F10X_XL
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation(ProgramTimeout);
+  
+  if(Address < FLASH_BANK1_END_ADDRESS)
+  {
+    if(status == FLASH_COMPLETE)
+    {
+      /* if the previous operation is completed, proceed to program the new data */
+      FLASH->CR |= CR_PG_Set;
+  
+      *(__IO uint16_t*)Address = Data;
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastBank1Operation(ProgramTimeout);
+
+      /* Disable the PG Bit */
+      FLASH->CR &= CR_PG_Reset;
+    }
+  }
+  else
+  {
+    if(status == FLASH_COMPLETE)
+    {
+      /* if the previous operation is completed, proceed to program the new data */
+      FLASH->CR2 |= CR_PG_Set;
+  
+      *(__IO uint16_t*)Address = Data;
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastBank2Operation(ProgramTimeout);
+
+      /* Disable the PG Bit */
+      FLASH->CR2 &= CR_PG_Reset;
+    }
+  }
+#else
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation(ProgramTimeout);
+  
+  if(status == FLASH_COMPLETE)
+  {
+    /* if the previous operation is completed, proceed to program the new data */
+    FLASH->CR |= CR_PG_Set;
+  
+    *(__IO uint16_t*)Address = Data;
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation(ProgramTimeout);
+    
+    /* Disable the PG Bit */
+    FLASH->CR &= CR_PG_Reset;
+  } 
+#endif  /* STM32F10X_XL */
+  
+  /* Return the Program Status */
+  return status;
+}
+
+/**
+  * @brief  Programs a half word at a specified Option Byte Data address.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  Address: specifies the address to be programmed.
+  *   This parameter can be 0x1FFFF804 or 0x1FFFF806. 
+  * @param  Data: specifies the data to be programmed.
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. 
+  */
+FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data)
+{
+  FLASH_Status status = FLASH_COMPLETE;
+  /* Check the parameters */
+  assert_param(IS_OB_DATA_ADDRESS(Address));
+  status = FLASH_WaitForLastOperation(ProgramTimeout);
+
+  if(status == FLASH_COMPLETE)
+  {
+    /* Authorize the small information block programming */
+    FLASH->OPTKEYR = FLASH_KEY1;
+    FLASH->OPTKEYR = FLASH_KEY2;
+    /* Enables the Option Bytes Programming operation */
+    FLASH->CR |= CR_OPTPG_Set; 
+    *(__IO uint16_t*)Address = Data;
+    
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation(ProgramTimeout);
+    if(status != FLASH_TIMEOUT)
+    {
+      /* if the program operation is completed, disable the OPTPG Bit */
+      FLASH->CR &= CR_OPTPG_Reset;
+    }
+  }
+  /* Return the Option Byte Data Program Status */
+  return status;
+}
+
+/**
+  * @brief  Write protects the desired pages
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  FLASH_Pages: specifies the address of the pages to be write protected.
+  *   This parameter can be:
+  *     @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31  
+  *     @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3
+  *       and FLASH_WRProt_Pages124to127
+  *     @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and
+  *       FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255
+  *     @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and
+  *       FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127    
+  *     @arg For @b STM32_XL-density_devices: value between FLASH_WRProt_Pages0to1 and
+  *       FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to511
+  *     @arg FLASH_WRProt_AllPages
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages)
+{
+  uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
+  
+  FLASH_Status status = FLASH_COMPLETE;
+  
+  /* Check the parameters */
+  assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages));
+  
+  FLASH_Pages = (uint32_t)(~FLASH_Pages);
+  WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask);
+  WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8);
+  WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16);
+  WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24);
+  
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation(ProgramTimeout);
+  
+  if(status == FLASH_COMPLETE)
+  {
+    /* Authorizes the small information block programming */
+    FLASH->OPTKEYR = FLASH_KEY1;
+    FLASH->OPTKEYR = FLASH_KEY2;
+    FLASH->CR |= CR_OPTPG_Set;
+    if(WRP0_Data != 0xFF)
+    {
+      OB->WRP0 = WRP0_Data;
+      
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation(ProgramTimeout);
+    }
+    if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF))
+    {
+      OB->WRP1 = WRP1_Data;
+      
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation(ProgramTimeout);
+    }
+    if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF))
+    {
+      OB->WRP2 = WRP2_Data;
+      
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation(ProgramTimeout);
+    }
+    
+    if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF))
+    {
+      OB->WRP3 = WRP3_Data;
+     
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation(ProgramTimeout);
+    }
+          
+    if(status != FLASH_TIMEOUT)
+    {
+      /* if the program operation is completed, disable the OPTPG Bit */
+      FLASH->CR &= CR_OPTPG_Reset;
+    }
+  } 
+  /* Return the write protection operation Status */
+  return status;       
+}
+
+/**
+  * @brief  Enables or disables the read out protection.
+  * @note   If the user has already programmed the other option bytes before calling 
+  *   this function, he must re-program them since this function erases all option bytes.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  Newstate: new state of the ReadOut Protection.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState)
+{
+  FLASH_Status status = FLASH_COMPLETE;
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  status = FLASH_WaitForLastOperation(EraseTimeout);
+  if(status == FLASH_COMPLETE)
+  {
+    /* Authorizes the small information block programming */
+    FLASH->OPTKEYR = FLASH_KEY1;
+    FLASH->OPTKEYR = FLASH_KEY2;
+    FLASH->CR |= CR_OPTER_Set;
+    FLASH->CR |= CR_STRT_Set;
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation(EraseTimeout);
+    if(status == FLASH_COMPLETE)
+    {
+      /* if the erase operation is completed, disable the OPTER Bit */
+      FLASH->CR &= CR_OPTER_Reset;
+      /* Enable the Option Bytes Programming operation */
+      FLASH->CR |= CR_OPTPG_Set; 
+      if(NewState != DISABLE)
+      {
+        OB->RDP = 0x00;
+      }
+      else
+      {
+        OB->RDP = RDP_Key;  
+      }
+      /* Wait for last operation to be completed */
+      status = FLASH_WaitForLastOperation(EraseTimeout); 
+    
+      if(status != FLASH_TIMEOUT)
+      {
+        /* if the program operation is completed, disable the OPTPG Bit */
+        FLASH->CR &= CR_OPTPG_Reset;
+      }
+    }
+    else 
+    {
+      if(status != FLASH_TIMEOUT)
+      {
+        /* Disable the OPTER Bit */
+        FLASH->CR &= CR_OPTER_Reset;
+      }
+    }
+  }
+  /* Return the protection operation Status */
+  return status;       
+}
+
+/**
+  * @brief  Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  OB_IWDG: Selects the IWDG mode
+  *   This parameter can be one of the following values:
+  *     @arg OB_IWDG_SW: Software IWDG selected
+  *     @arg OB_IWDG_HW: Hardware IWDG selected
+  * @param  OB_STOP: Reset event when entering STOP mode.
+  *   This parameter can be one of the following values:
+  *     @arg OB_STOP_NoRST: No reset generated when entering in STOP
+  *     @arg OB_STOP_RST: Reset generated when entering in STOP
+  * @param  OB_STDBY: Reset event when entering Standby mode.
+  *   This parameter can be one of the following values:
+  *     @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY
+  *     @arg OB_STDBY_RST: Reset generated when entering in STANDBY
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, 
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY)
+{
+  FLASH_Status status = FLASH_COMPLETE; 
+
+  /* Check the parameters */
+  assert_param(IS_OB_IWDG_SOURCE(OB_IWDG));
+  assert_param(IS_OB_STOP_SOURCE(OB_STOP));
+  assert_param(IS_OB_STDBY_SOURCE(OB_STDBY));
+
+  /* Authorize the small information block programming */
+  FLASH->OPTKEYR = FLASH_KEY1;
+  FLASH->OPTKEYR = FLASH_KEY2;
+  
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation(ProgramTimeout);
+  
+  if(status == FLASH_COMPLETE)
+  {  
+    /* Enable the Option Bytes Programming operation */
+    FLASH->CR |= CR_OPTPG_Set; 
+           
+    OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8))); 
+  
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation(ProgramTimeout);
+    if(status != FLASH_TIMEOUT)
+    {
+      /* if the program operation is completed, disable the OPTPG Bit */
+      FLASH->CR &= CR_OPTPG_Reset;
+    }
+  }    
+  /* Return the Option Byte program Status */
+  return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+  * @brief  Configures to boot from Bank1 or Bank2.  
+  * @note   This function can be used only for STM32F10x_XL density devices.
+  * @param  FLASH_BOOT: select the FLASH Bank to boot from.
+  *   This parameter can be one of the following values:
+  *     @arg FLASH_BOOT_Bank1: At startup, if boot pins are set in boot from user Flash
+  *        position and this parameter is selected the device will boot from Bank1(Default).
+  *     @arg FLASH_BOOT_Bank2: At startup, if boot pins are set in boot from user Flash
+  *        position and this parameter is selected the device will boot from Bank2 or Bank1,
+  *        depending on the activation of the bank. The active banks are checked in
+  *        the following order: Bank2, followed by Bank1.
+  *        The active bank is recognized by the value programmed at the base address
+  *        of the respective bank (corresponding to the initial stack pointer value
+  *        in the interrupt vector table).
+  *        For more information, please refer to AN2606 from www.st.com.    
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, 
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_BootConfig(uint16_t FLASH_BOOT)
+{ 
+  FLASH_Status status = FLASH_COMPLETE; 
+  assert_param(IS_FLASH_BOOT(FLASH_BOOT));
+  /* Authorize the small information block programming */
+  FLASH->OPTKEYR = FLASH_KEY1;
+  FLASH->OPTKEYR = FLASH_KEY2;
+  
+  /* Wait for last operation to be completed */
+  status = FLASH_WaitForLastOperation(ProgramTimeout);
+  
+  if(status == FLASH_COMPLETE)
+  {  
+    /* Enable the Option Bytes Programming operation */
+    FLASH->CR |= CR_OPTPG_Set; 
+
+    if(FLASH_BOOT == FLASH_BOOT_Bank1)
+    {
+      OB->USER |= OB_USER_BFB2;
+    }
+    else
+    {
+      OB->USER &= (uint16_t)(~(uint16_t)(OB_USER_BFB2));
+    }
+    /* Wait for last operation to be completed */
+    status = FLASH_WaitForLastOperation(ProgramTimeout);
+    if(status != FLASH_TIMEOUT)
+    {
+      /* if the program operation is completed, disable the OPTPG Bit */
+      FLASH->CR &= CR_OPTPG_Reset;
+    }
+  }    
+  /* Return the Option Byte program Status */
+  return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+  * @brief  Returns the FLASH User Option Bytes values.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  None
+  * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1)
+  *         and RST_STDBY(Bit2).
+  */
+uint32_t FLASH_GetUserOptionByte(void)
+{
+  /* Return the User Option Byte */
+  return (uint32_t)(FLASH->OBR >> 2);
+}
+
+/**
+  * @brief  Returns the FLASH Write Protection Option Bytes Register value.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  None
+  * @retval The FLASH Write Protection  Option Bytes Register value
+  */
+uint32_t FLASH_GetWriteProtectionOptionByte(void)
+{
+  /* Return the Flash write protection Register value */
+  return (uint32_t)(FLASH->WRPR);
+}
+
+/**
+  * @brief  Checks whether the FLASH Read Out Protection Status is set or not.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  None
+  * @retval FLASH ReadOut Protection Status(SET or RESET)
+  */
+FlagStatus FLASH_GetReadOutProtectionStatus(void)
+{
+  FlagStatus readoutstatus = RESET;
+  if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET)
+  {
+    readoutstatus = SET;
+  }
+  else
+  {
+    readoutstatus = RESET;
+  }
+  return readoutstatus;
+}
+
+/**
+  * @brief  Checks whether the FLASH Prefetch Buffer status is set or not.
+  * @note   This function can be used for all STM32F10x devices.
+  * @param  None
+  * @retval FLASH Prefetch Buffer Status (SET or RESET).
+  */
+FlagStatus FLASH_GetPrefetchBufferStatus(void)
+{
+  FlagStatus bitstatus = RESET;
+  
+  if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */
+  return bitstatus; 
+}
+
+/**
+  * @brief  Enables or disables the specified FLASH interrupts.
+  * @note   This function can be used for all STM32F10x devices.
+  *         - For STM32F10X_XL devices, enables or disables the specified FLASH interrupts
+              for Bank1 and Bank2.
+  *         - For other devices it enables or disables the specified FLASH interrupts for Bank1.
+  * @param  FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled.
+  *   This parameter can be any combination of the following values:
+  *     @arg FLASH_IT_ERROR: FLASH Error Interrupt
+  *     @arg FLASH_IT_EOP: FLASH end of operation Interrupt
+  * @param  NewState: new state of the specified Flash interrupts.
+  *   This parameter can be: ENABLE or DISABLE.      
+  * @retval None 
+  */
+void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState)
+{
+#ifdef STM32F10X_XL
+  /* Check the parameters */
+  assert_param(IS_FLASH_IT(FLASH_IT)); 
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  if((FLASH_IT & 0x80000000) != 0x0)
+  {
+    if(NewState != DISABLE)
+    {
+      /* Enable the interrupt sources */
+      FLASH->CR2 |= (FLASH_IT & 0x7FFFFFFF);
+    }
+    else
+    {
+      /* Disable the interrupt sources */
+      FLASH->CR2 &= ~(uint32_t)(FLASH_IT & 0x7FFFFFFF);
+    }
+  }
+  else
+  {
+    if(NewState != DISABLE)
+    {
+      /* Enable the interrupt sources */
+      FLASH->CR |= FLASH_IT;
+    }
+    else
+    {
+      /* Disable the interrupt sources */
+      FLASH->CR &= ~(uint32_t)FLASH_IT;
+    }
+  }
+#else
+  /* Check the parameters */
+  assert_param(IS_FLASH_IT(FLASH_IT)); 
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  if(NewState != DISABLE)
+  {
+    /* Enable the interrupt sources */
+    FLASH->CR |= FLASH_IT;
+  }
+  else
+  {
+    /* Disable the interrupt sources */
+    FLASH->CR &= ~(uint32_t)FLASH_IT;
+  }
+#endif /* STM32F10X_XL */
+}
+
+/**
+  * @brief  Checks whether the specified FLASH flag is set or not.
+  * @note   This function can be used for all STM32F10x devices.
+  *         - For STM32F10X_XL devices, this function checks whether the specified 
+  *           Bank1 or Bank2 flag is set or not.
+  *         - For other devices, it checks whether the specified Bank1 flag is 
+  *           set or not.
+  * @param  FLASH_FLAG: specifies the FLASH flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg FLASH_FLAG_BSY: FLASH Busy flag           
+  *     @arg FLASH_FLAG_PGERR: FLASH Program error flag       
+  *     @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag      
+  *     @arg FLASH_FLAG_EOP: FLASH End of Operation flag           
+  *     @arg FLASH_FLAG_OPTERR:  FLASH Option Byte error flag     
+  * @retval The new state of FLASH_FLAG (SET or RESET).
+  */
+FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+
+#ifdef STM32F10X_XL
+  /* Check the parameters */
+  assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
+  if(FLASH_FLAG == FLASH_FLAG_OPTERR) 
+  {
+    if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
+    {
+      bitstatus = SET;
+    }
+    else
+    {
+      bitstatus = RESET;
+    }
+  }
+  else
+  {
+    if((FLASH_FLAG & 0x80000000) != 0x0)
+    {
+      if((FLASH->SR2 & FLASH_FLAG) != (uint32_t)RESET)
+      {
+        bitstatus = SET;
+      }
+      else
+      {
+        bitstatus = RESET;
+      }
+    }
+    else
+    {
+      if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
+      {
+        bitstatus = SET;
+      }
+      else
+      {
+        bitstatus = RESET;
+      }
+    }
+  }
+#else
+  /* Check the parameters */
+  assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ;
+  if(FLASH_FLAG == FLASH_FLAG_OPTERR) 
+  {
+    if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
+    {
+      bitstatus = SET;
+    }
+    else
+    {
+      bitstatus = RESET;
+    }
+  }
+  else
+  {
+   if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET)
+    {
+      bitstatus = SET;
+    }
+    else
+    {
+      bitstatus = RESET;
+    }
+  }
+#endif /* STM32F10X_XL */
+
+  /* Return the new state of FLASH_FLAG (SET or RESET) */
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the FLASH's pending flags.
+  * @note   This function can be used for all STM32F10x devices.
+  *         - For STM32F10X_XL devices, this function clears Bank1 or Bank2’s pending flags
+  *         - For other devices, it clears Bank1’s pending flags.
+  * @param  FLASH_FLAG: specifies the FLASH flags to clear.
+  *   This parameter can be any combination of the following values:         
+  *     @arg FLASH_FLAG_PGERR: FLASH Program error flag       
+  *     @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag      
+  *     @arg FLASH_FLAG_EOP: FLASH End of Operation flag           
+  * @retval None
+  */
+void FLASH_ClearFlag(uint32_t FLASH_FLAG)
+{
+#ifdef STM32F10X_XL
+  /* Check the parameters */
+  assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
+
+  if((FLASH_FLAG & 0x80000000) != 0x0)
+  {
+    /* Clear the flags */
+    FLASH->SR2 = FLASH_FLAG;
+  }
+  else
+  {
+    /* Clear the flags */
+    FLASH->SR = FLASH_FLAG;
+  }  
+
+#else
+  /* Check the parameters */
+  assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ;
+  
+  /* Clear the flags */
+  FLASH->SR = FLASH_FLAG;
+#endif /* STM32F10X_XL */
+}
+
+/**
+  * @brief  Returns the FLASH Status.
+  * @note   This function can be used for all STM32F10x devices, it is equivalent
+  *         to FLASH_GetBank1Status function.
+  * @param  None
+  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP or FLASH_COMPLETE
+  */
+FLASH_Status FLASH_GetStatus(void)
+{
+  FLASH_Status flashstatus = FLASH_COMPLETE;
+  
+  if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) 
+  {
+    flashstatus = FLASH_BUSY;
+  }
+  else 
+  {  
+    if((FLASH->SR & FLASH_FLAG_PGERR) != 0)
+    { 
+      flashstatus = FLASH_ERROR_PG;
+    }
+    else 
+    {
+      if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 )
+      {
+        flashstatus = FLASH_ERROR_WRP;
+      }
+      else
+      {
+        flashstatus = FLASH_COMPLETE;
+      }
+    }
+  }
+  /* Return the Flash Status */
+  return flashstatus;
+}
+
+/**
+  * @brief  Returns the FLASH Bank1 Status.
+  * @note   This function can be used for all STM32F10x devices, it is equivalent
+  *         to FLASH_GetStatus function.
+  * @param  None
+  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP or FLASH_COMPLETE
+  */
+FLASH_Status FLASH_GetBank1Status(void)
+{
+  FLASH_Status flashstatus = FLASH_COMPLETE;
+  
+  if((FLASH->SR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY) 
+  {
+    flashstatus = FLASH_BUSY;
+  }
+  else 
+  {  
+    if((FLASH->SR & FLASH_FLAG_BANK1_PGERR) != 0)
+    { 
+      flashstatus = FLASH_ERROR_PG;
+    }
+    else 
+    {
+      if((FLASH->SR & FLASH_FLAG_BANK1_WRPRTERR) != 0 )
+      {
+        flashstatus = FLASH_ERROR_WRP;
+      }
+      else
+      {
+        flashstatus = FLASH_COMPLETE;
+      }
+    }
+  }
+  /* Return the Flash Status */
+  return flashstatus;
+}
+
+#ifdef STM32F10X_XL
+/**
+  * @brief  Returns the FLASH Bank2 Status.
+  * @note   This function can be used for STM32F10x_XL density devices.
+  * @param  None
+  * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
+  *        FLASH_ERROR_WRP or FLASH_COMPLETE
+  */
+FLASH_Status FLASH_GetBank2Status(void)
+{
+  FLASH_Status flashstatus = FLASH_COMPLETE;
+  
+  if((FLASH->SR2 & (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) 
+  {
+    flashstatus = FLASH_BUSY;
+  }
+  else 
+  {  
+    if((FLASH->SR2 & (FLASH_FLAG_BANK2_PGERR & 0x7FFFFFFF)) != 0)
+    { 
+      flashstatus = FLASH_ERROR_PG;
+    }
+    else 
+    {
+      if((FLASH->SR2 & (FLASH_FLAG_BANK2_WRPRTERR & 0x7FFFFFFF)) != 0 )
+      {
+        flashstatus = FLASH_ERROR_WRP;
+      }
+      else
+      {
+        flashstatus = FLASH_COMPLETE;
+      }
+    }
+  }
+  /* Return the Flash Status */
+  return flashstatus;
+}
+#endif /* STM32F10X_XL */
+/**
+  * @brief  Waits for a Flash operation to complete or a TIMEOUT to occur.
+  * @note   This function can be used for all STM32F10x devices, 
+  *         it is equivalent to FLASH_WaitForLastBank1Operation.
+  *         - For STM32F10X_XL devices this function waits for a Bank1 Flash operation
+  *           to complete or a TIMEOUT to occur.
+  *         - For all other devices it waits for a Flash operation to complete 
+  *           or a TIMEOUT to occur.
+  * @param  Timeout: FLASH programming Timeout
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
+{ 
+  FLASH_Status status = FLASH_COMPLETE;
+   
+  /* Check for the Flash Status */
+  status = FLASH_GetBank1Status();
+  /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+  while((status == FLASH_BUSY) && (Timeout != 0x00))
+  {
+    status = FLASH_GetBank1Status();
+    Timeout--;
+  }
+  if(Timeout == 0x00 )
+  {
+    status = FLASH_TIMEOUT;
+  }
+  /* Return the operation status */
+  return status;
+}
+
+/**
+  * @brief  Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
+  * @note   This function can be used for all STM32F10x devices, 
+  *         it is equivalent to FLASH_WaitForLastOperation.
+  * @param  Timeout: FLASH programming Timeout
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout)
+{ 
+  FLASH_Status status = FLASH_COMPLETE;
+   
+  /* Check for the Flash Status */
+  status = FLASH_GetBank1Status();
+  /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+  while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00))
+  {
+    status = FLASH_GetBank1Status();
+    Timeout--;
+  }
+  if(Timeout == 0x00 )
+  {
+    status = FLASH_TIMEOUT;
+  }
+  /* Return the operation status */
+  return status;
+}
+
+#ifdef STM32F10X_XL
+/**
+  * @brief  Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur.
+  * @note   This function can be used only for STM32F10x_XL density devices.
+  * @param  Timeout: FLASH programming Timeout
+  * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG,
+  *         FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
+  */
+FLASH_Status FLASH_WaitForLastBank2Operation(uint32_t Timeout)
+{ 
+  FLASH_Status status = FLASH_COMPLETE;
+   
+  /* Check for the Flash Status */
+  status = FLASH_GetBank2Status();
+  /* Wait for a Flash operation to complete or a TIMEOUT to occur */
+  while((status == (FLASH_FLAG_BANK2_BSY & 0x7FFFFFFF)) && (Timeout != 0x00))
+  {
+    status = FLASH_GetBank2Status();
+    Timeout--;
+  }
+  if(Timeout == 0x00 )
+  {
+    status = FLASH_TIMEOUT;
+  }
+  /* Return the operation status */
+  return status;
+}
+#endif /* STM32F10X_XL */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_fsmc.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_fsmc.c
new file mode 100644
index 0000000000000000000000000000000000000000..c75137cacbaa04d0586f2167fc681916cc53606b
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_fsmc.c
@@ -0,0 +1,866 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_fsmc.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the FSMC firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup FSMC 
+  * @brief FSMC driver modules
+  * @{
+  */ 
+
+/** @defgroup FSMC_Private_TypesDefinitions
+  * @{
+  */ 
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Private_Defines
+  * @{
+  */
+
+/* --------------------- FSMC registers bit mask ---------------------------- */
+
+/* FSMC BCRx Mask */
+#define BCR_MBKEN_Set                       ((uint32_t)0x00000001)
+#define BCR_MBKEN_Reset                     ((uint32_t)0x000FFFFE)
+#define BCR_FACCEN_Set                      ((uint32_t)0x00000040)
+
+/* FSMC PCRx Mask */
+#define PCR_PBKEN_Set                       ((uint32_t)0x00000004)
+#define PCR_PBKEN_Reset                     ((uint32_t)0x000FFFFB)
+#define PCR_ECCEN_Set                       ((uint32_t)0x00000040)
+#define PCR_ECCEN_Reset                     ((uint32_t)0x000FFFBF)
+#define PCR_MemoryType_NAND                 ((uint32_t)0x00000008)
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup FSMC_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the FSMC NOR/SRAM Banks registers to their default 
+  *         reset values.
+  * @param  FSMC_Bank: specifies the FSMC Bank to be used
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1  
+  *     @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 
+  *     @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 
+  *     @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 
+  * @retval None
+  */
+void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank)
+{
+  /* Check the parameter */
+  assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
+  
+  /* FSMC_Bank1_NORSRAM1 */
+  if(FSMC_Bank == FSMC_Bank1_NORSRAM1)
+  {
+    FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB;    
+  }
+  /* FSMC_Bank1_NORSRAM2,  FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */
+  else
+  {   
+    FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2; 
+  }
+  FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF;
+  FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF;  
+}
+
+/**
+  * @brief  Deinitializes the FSMC NAND Banks registers to their default reset values.
+  * @param  FSMC_Bank: specifies the FSMC Bank to be used
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
+  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND 
+  * @retval None
+  */
+void FSMC_NANDDeInit(uint32_t FSMC_Bank)
+{
+  /* Check the parameter */
+  assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+  
+  if(FSMC_Bank == FSMC_Bank2_NAND)
+  {
+    /* Set the FSMC_Bank2 registers to their reset values */
+    FSMC_Bank2->PCR2 = 0x00000018;
+    FSMC_Bank2->SR2 = 0x00000040;
+    FSMC_Bank2->PMEM2 = 0xFCFCFCFC;
+    FSMC_Bank2->PATT2 = 0xFCFCFCFC;  
+  }
+  /* FSMC_Bank3_NAND */  
+  else
+  {
+    /* Set the FSMC_Bank3 registers to their reset values */
+    FSMC_Bank3->PCR3 = 0x00000018;
+    FSMC_Bank3->SR3 = 0x00000040;
+    FSMC_Bank3->PMEM3 = 0xFCFCFCFC;
+    FSMC_Bank3->PATT3 = 0xFCFCFCFC; 
+  }  
+}
+
+/**
+  * @brief  Deinitializes the FSMC PCCARD Bank registers to their default reset values.
+  * @param  None                       
+  * @retval None
+  */
+void FSMC_PCCARDDeInit(void)
+{
+  /* Set the FSMC_Bank4 registers to their reset values */
+  FSMC_Bank4->PCR4 = 0x00000018; 
+  FSMC_Bank4->SR4 = 0x00000000;	
+  FSMC_Bank4->PMEM4 = 0xFCFCFCFC;
+  FSMC_Bank4->PATT4 = 0xFCFCFCFC;
+  FSMC_Bank4->PIO4 = 0xFCFCFCFC;
+}
+
+/**
+  * @brief  Initializes the FSMC NOR/SRAM Banks according to the specified
+  *         parameters in the FSMC_NORSRAMInitStruct.
+  * @param  FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef
+  *         structure that contains the configuration information for 
+  *        the FSMC NOR/SRAM specified Banks.                       
+  * @retval None
+  */
+void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank));
+  assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux));
+  assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType));
+  assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth));
+  assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode));
+  assert_param(IS_FSMC_ASYNWAIT(FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait));
+  assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity));
+  assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode));
+  assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive));
+  assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation));
+  assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal));
+  assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode));
+  assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst));  
+  assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime));
+  assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime));
+  assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime));
+  assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration));
+  assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision));
+  assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency));
+  assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode)); 
+  
+  /* Bank1 NOR/SRAM control register configuration */ 
+  FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 
+            (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux |
+            FSMC_NORSRAMInitStruct->FSMC_MemoryType |
+            FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth |
+            FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode |
+            FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait |
+            FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity |
+            FSMC_NORSRAMInitStruct->FSMC_WrapMode |
+            FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive |
+            FSMC_NORSRAMInitStruct->FSMC_WriteOperation |
+            FSMC_NORSRAMInitStruct->FSMC_WaitSignal |
+            FSMC_NORSRAMInitStruct->FSMC_ExtendedMode |
+            FSMC_NORSRAMInitStruct->FSMC_WriteBurst;
+
+  if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR)
+  {
+    FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)BCR_FACCEN_Set;
+  }
+  
+  /* Bank1 NOR/SRAM timing register configuration */
+  FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] = 
+            (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime |
+            (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) |
+            (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) |
+            (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) |
+            (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) |
+            (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) |
+             FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode;
+            
+    
+  /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */
+  if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable)
+  {
+    assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime));
+    assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime));
+    assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime));
+    assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision));
+    assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency));
+    assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode));
+    FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 
+              (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime |
+              (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )|
+              (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) |
+              (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) |
+              (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) |
+               FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode;
+  }
+  else
+  {
+    FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF;
+  }
+}
+
+/**
+  * @brief  Initializes the FSMC NAND Banks according to the specified 
+  *         parameters in the FSMC_NANDInitStruct.
+  * @param  FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef 
+  *         structure that contains the configuration information for the FSMC 
+  *         NAND specified Banks.                       
+  * @retval None
+  */
+void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
+{
+  uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000; 
+    
+  /* Check the parameters */
+  assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank));
+  assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature));
+  assert_param( IS_FSMC_MEMORY_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth));
+  assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC));
+  assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize));
+  assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime));
+  assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime));
+  assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
+  assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
+  
+  /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */
+  tmppcr = (uint32_t)FSMC_NANDInitStruct->FSMC_Waitfeature |
+            PCR_MemoryType_NAND |
+            FSMC_NANDInitStruct->FSMC_MemoryDataWidth |
+            FSMC_NANDInitStruct->FSMC_ECC |
+            FSMC_NANDInitStruct->FSMC_ECCPageSize |
+            (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )|
+            (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13);
+            
+  /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */
+  tmppmem = (uint32_t)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
+            (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+            (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+            (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); 
+            
+  /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */
+  tmppatt = (uint32_t)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
+            (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+            (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+            (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);
+  
+  if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND)
+  {
+    /* FSMC_Bank2_NAND registers configuration */
+    FSMC_Bank2->PCR2 = tmppcr;
+    FSMC_Bank2->PMEM2 = tmppmem;
+    FSMC_Bank2->PATT2 = tmppatt;
+  }
+  else
+  {
+    /* FSMC_Bank3_NAND registers configuration */
+    FSMC_Bank3->PCR3 = tmppcr;
+    FSMC_Bank3->PMEM3 = tmppmem;
+    FSMC_Bank3->PATT3 = tmppatt;
+  }
+}
+
+/**
+  * @brief  Initializes the FSMC PCCARD Bank according to the specified 
+  *         parameters in the FSMC_PCCARDInitStruct.
+  * @param  FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef
+  *         structure that contains the configuration information for the FSMC 
+  *         PCCARD Bank.                       
+  * @retval None
+  */
+void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature));
+  assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime));
+  assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime));
+ 
+  assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime));
+  
+  assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime));
+  assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime));
+  assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime));
+  assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime));
+  assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime));
+  
+  /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */
+  FSMC_Bank4->PCR4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_Waitfeature |
+                     FSMC_MemoryDataWidth_16b |  
+                     (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) |
+                     (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13);
+            
+  /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */
+  FSMC_Bank4->PMEM4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime |
+                      (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+                      (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+                      (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); 
+            
+  /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */
+  FSMC_Bank4->PATT4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime |
+                      (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+                      (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+                      (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24);	
+            
+  /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */
+  FSMC_Bank4->PIO4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime |
+                     (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) |
+                     (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)|
+                     (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24);             
+}
+
+/**
+  * @brief  Fills each FSMC_NORSRAMInitStruct member with its default value.
+  * @param  FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef 
+  *         structure which will be initialized.
+  * @retval None
+  */
+void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct)
+{  
+  /* Reset NOR/SRAM Init structure parameters values */
+  FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1;
+  FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable;
+  FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM;
+  FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
+  FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
+  FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;
+  FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
+  FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable;
+  FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
+  FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable;
+  FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable;
+  FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
+  FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable;
+  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF;
+  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF;
+  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF;
+  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
+  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF;
+  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF;
+  FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; 
+  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF;
+  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF;
+  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF;
+  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF;
+  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF;
+  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF;
+  FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A;
+}
+
+/**
+  * @brief  Fills each FSMC_NANDInitStruct member with its default value.
+  * @param  FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef 
+  *         structure which will be initialized.
+  * @retval None
+  */
+void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct)
+{ 
+  /* Reset NAND Init structure parameters values */
+  FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND;
+  FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
+  FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
+  FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable;
+  FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes;
+  FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0;
+  FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0;
+  FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+  FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+  FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+  FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+  FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+  FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+  FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+  FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;	  
+}
+
+/**
+  * @brief  Fills each FSMC_PCCARDInitStruct member with its default value.
+  * @param  FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef 
+  *         structure which will be initialized.
+  * @retval None
+  */
+void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct)
+{
+  /* Reset PCCARD Init structure parameters values */
+  FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable;
+  FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0;
+  FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0;
+  FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+  FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+  FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+  FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+  FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+  FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+  FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+  FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;	
+  FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC;
+  FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC;
+  FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC;
+  FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC;
+}
+
+/**
+  * @brief  Enables or disables the specified NOR/SRAM Memory Bank.
+  * @param  FSMC_Bank: specifies the FSMC Bank to be used
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1  
+  *     @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 
+  *     @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 
+  *     @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 
+  * @param  NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+  assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */
+    FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set;
+  }
+  else
+  {
+    /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */
+    FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified NAND Memory Bank.
+  * @param  FSMC_Bank: specifies the FSMC Bank to be used
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
+  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+  * @param  NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+  assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */
+    if(FSMC_Bank == FSMC_Bank2_NAND)
+    {
+      FSMC_Bank2->PCR2 |= PCR_PBKEN_Set;
+    }
+    else
+    {
+      FSMC_Bank3->PCR3 |= PCR_PBKEN_Set;
+    }
+  }
+  else
+  {
+    /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */
+    if(FSMC_Bank == FSMC_Bank2_NAND)
+    {
+      FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset;
+    }
+    else
+    {
+      FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset;
+    }
+  }
+}
+
+/**
+  * @brief  Enables or disables the PCCARD Memory Bank.
+  * @param  NewState: new state of the PCCARD Memory Bank.  
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void FSMC_PCCARDCmd(FunctionalState NewState)
+{
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */
+    FSMC_Bank4->PCR4 |= PCR_PBKEN_Set;
+  }
+  else
+  {
+    /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */
+    FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the FSMC NAND ECC feature.
+  * @param  FSMC_Bank: specifies the FSMC Bank to be used
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
+  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+  * @param  NewState: new state of the FSMC NAND ECC feature.  
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState)
+{
+  assert_param(IS_FSMC_NAND_BANK(FSMC_Bank));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */
+    if(FSMC_Bank == FSMC_Bank2_NAND)
+    {
+      FSMC_Bank2->PCR2 |= PCR_ECCEN_Set;
+    }
+    else
+    {
+      FSMC_Bank3->PCR3 |= PCR_ECCEN_Set;
+    }
+  }
+  else
+  {
+    /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */
+    if(FSMC_Bank == FSMC_Bank2_NAND)
+    {
+      FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset;
+    }
+    else
+    {
+      FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset;
+    }
+  }
+}
+
+/**
+  * @brief  Returns the error correction code register value.
+  * @param  FSMC_Bank: specifies the FSMC Bank to be used
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
+  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+  * @retval The Error Correction Code (ECC) value.
+  */
+uint32_t FSMC_GetECC(uint32_t FSMC_Bank)
+{
+  uint32_t eccval = 0x00000000;
+  
+  if(FSMC_Bank == FSMC_Bank2_NAND)
+  {
+    /* Get the ECCR2 register value */
+    eccval = FSMC_Bank2->ECCR2;
+  }
+  else
+  {
+    /* Get the ECCR3 register value */
+    eccval = FSMC_Bank3->ECCR3;
+  }
+  /* Return the error correction code value */
+  return(eccval);
+}
+
+/**
+  * @brief  Enables or disables the specified FSMC interrupts.
+  * @param  FSMC_Bank: specifies the FSMC Bank to be used
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
+  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+  *     @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+  * @param  FSMC_IT: specifies the FSMC interrupt sources to be enabled or disabled.
+  *   This parameter can be any combination of the following values:
+  *     @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. 
+  *     @arg FSMC_IT_Level: Level edge detection interrupt.
+  *     @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
+  * @param  NewState: new state of the specified FSMC interrupts.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState)
+{
+  assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+  assert_param(IS_FSMC_IT(FSMC_IT));	
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected FSMC_Bank2 interrupts */
+    if(FSMC_Bank == FSMC_Bank2_NAND)
+    {
+      FSMC_Bank2->SR2 |= FSMC_IT;
+    }
+    /* Enable the selected FSMC_Bank3 interrupts */
+    else if (FSMC_Bank == FSMC_Bank3_NAND)
+    {
+      FSMC_Bank3->SR3 |= FSMC_IT;
+    }
+    /* Enable the selected FSMC_Bank4 interrupts */
+    else
+    {
+      FSMC_Bank4->SR4 |= FSMC_IT;    
+    }
+  }
+  else
+  {
+    /* Disable the selected FSMC_Bank2 interrupts */
+    if(FSMC_Bank == FSMC_Bank2_NAND)
+    {
+      
+      FSMC_Bank2->SR2 &= (uint32_t)~FSMC_IT;
+    }
+    /* Disable the selected FSMC_Bank3 interrupts */
+    else if (FSMC_Bank == FSMC_Bank3_NAND)
+    {
+      FSMC_Bank3->SR3 &= (uint32_t)~FSMC_IT;
+    }
+    /* Disable the selected FSMC_Bank4 interrupts */
+    else
+    {
+      FSMC_Bank4->SR4 &= (uint32_t)~FSMC_IT;    
+    }
+  }
+}
+
+/**
+  * @brief  Checks whether the specified FSMC flag is set or not.
+  * @param  FSMC_Bank: specifies the FSMC Bank to be used
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
+  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+  *     @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+  * @param  FSMC_FLAG: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
+  *     @arg FSMC_FLAG_Level: Level detection Flag.
+  *     @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
+  *     @arg FSMC_FLAG_FEMPT: Fifo empty Flag. 
+  * @retval The new state of FSMC_FLAG (SET or RESET).
+  */
+FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  uint32_t tmpsr = 0x00000000;
+  
+  /* Check the parameters */
+  assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
+  assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG));
+  
+  if(FSMC_Bank == FSMC_Bank2_NAND)
+  {
+    tmpsr = FSMC_Bank2->SR2;
+  }  
+  else if(FSMC_Bank == FSMC_Bank3_NAND)
+  {
+    tmpsr = FSMC_Bank3->SR3;
+  }
+  /* FSMC_Bank4_PCCARD*/
+  else
+  {
+    tmpsr = FSMC_Bank4->SR4;
+  } 
+  
+  /* Get the flag status */
+  if ((tmpsr & FSMC_FLAG) != (uint16_t)RESET )
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  /* Return the flag status */
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the FSMC's pending flags.
+  * @param  FSMC_Bank: specifies the FSMC Bank to be used
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
+  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+  *     @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+  * @param  FSMC_FLAG: specifies the flag to clear.
+  *   This parameter can be any combination of the following values:
+  *     @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag.
+  *     @arg FSMC_FLAG_Level: Level detection Flag.
+  *     @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag.
+  * @retval None
+  */
+void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG)
+{
+ /* Check the parameters */
+  assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank));
+  assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ;
+    
+  if(FSMC_Bank == FSMC_Bank2_NAND)
+  {
+    FSMC_Bank2->SR2 &= ~FSMC_FLAG; 
+  }  
+  else if(FSMC_Bank == FSMC_Bank3_NAND)
+  {
+    FSMC_Bank3->SR3 &= ~FSMC_FLAG;
+  }
+  /* FSMC_Bank4_PCCARD*/
+  else
+  {
+    FSMC_Bank4->SR4 &= ~FSMC_FLAG;
+  }
+}
+
+/**
+  * @brief  Checks whether the specified FSMC interrupt has occurred or not.
+  * @param  FSMC_Bank: specifies the FSMC Bank to be used
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
+  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+  *     @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+  * @param  FSMC_IT: specifies the FSMC interrupt source to check.
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. 
+  *     @arg FSMC_IT_Level: Level edge detection interrupt.
+  *     @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. 
+  * @retval The new state of FSMC_IT (SET or RESET).
+  */
+ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT)
+{
+  ITStatus bitstatus = RESET;
+  uint32_t tmpsr = 0x0, itstatus = 0x0, itenable = 0x0; 
+  
+  /* Check the parameters */
+  assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+  assert_param(IS_FSMC_GET_IT(FSMC_IT));
+  
+  if(FSMC_Bank == FSMC_Bank2_NAND)
+  {
+    tmpsr = FSMC_Bank2->SR2;
+  }  
+  else if(FSMC_Bank == FSMC_Bank3_NAND)
+  {
+    tmpsr = FSMC_Bank3->SR3;
+  }
+  /* FSMC_Bank4_PCCARD*/
+  else
+  {
+    tmpsr = FSMC_Bank4->SR4;
+  } 
+  
+  itstatus = tmpsr & FSMC_IT;
+  
+  itenable = tmpsr & (FSMC_IT >> 3);
+  if ((itstatus != (uint32_t)RESET)  && (itenable != (uint32_t)RESET))
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus; 
+}
+
+/**
+  * @brief  Clears the FSMC's interrupt pending bits.
+  * @param  FSMC_Bank: specifies the FSMC Bank to be used
+  *   This parameter can be one of the following values:
+  *     @arg FSMC_Bank2_NAND: FSMC Bank2 NAND 
+  *     @arg FSMC_Bank3_NAND: FSMC Bank3 NAND
+  *     @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD
+  * @param  FSMC_IT: specifies the interrupt pending bit to clear.
+  *   This parameter can be any combination of the following values:
+  *     @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. 
+  *     @arg FSMC_IT_Level: Level edge detection interrupt.
+  *     @arg FSMC_IT_FallingEdge: Falling edge detection interrupt.
+  * @retval None
+  */
+void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT)
+{
+  /* Check the parameters */
+  assert_param(IS_FSMC_IT_BANK(FSMC_Bank));
+  assert_param(IS_FSMC_IT(FSMC_IT));
+    
+  if(FSMC_Bank == FSMC_Bank2_NAND)
+  {
+    FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3); 
+  }  
+  else if(FSMC_Bank == FSMC_Bank3_NAND)
+  {
+    FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3);
+  }
+  /* FSMC_Bank4_PCCARD*/
+  else
+  {
+    FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3);
+  }
+}
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_gpio.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_gpio.c
new file mode 100644
index 0000000000000000000000000000000000000000..93dbcd7cafb9d9ed858e678b7e25092e4a2d30f1
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_gpio.c
@@ -0,0 +1,650 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_gpio.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the GPIO firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup GPIO 
+  * @brief GPIO driver modules
+  * @{
+  */ 
+
+/** @defgroup GPIO_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Private_Defines
+  * @{
+  */
+
+/* ------------ RCC registers bit address in the alias region ----------------*/
+#define AFIO_OFFSET                 (AFIO_BASE - PERIPH_BASE)
+
+/* --- EVENTCR Register -----*/
+
+/* Alias word address of EVOE bit */
+#define EVCR_OFFSET                 (AFIO_OFFSET + 0x00)
+#define EVOE_BitNumber              ((uint8_t)0x07)
+#define EVCR_EVOE_BB                (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4))
+
+
+/* ---  MAPR Register ---*/ 
+/* Alias word address of MII_RMII_SEL bit */ 
+#define MAPR_OFFSET                 (AFIO_OFFSET + 0x04) 
+#define MII_RMII_SEL_BitNumber      ((u8)0x17) 
+#define MAPR_MII_RMII_SEL_BB        (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4))
+
+
+#define EVCR_PORTPINCONFIG_MASK     ((uint16_t)0xFF80)
+#define LSB_MASK                    ((uint16_t)0xFFFF)
+#define DBGAFR_POSITION_MASK        ((uint32_t)0x000F0000)
+#define DBGAFR_SWJCFG_MASK          ((uint32_t)0xF0FFFFFF)
+#define DBGAFR_LOCATION_MASK        ((uint32_t)0x00200000)
+#define DBGAFR_NUMBITS_MASK         ((uint32_t)0x00100000)
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup GPIO_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the GPIOx peripheral registers to their default reset values.
+  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
+  * @retval None
+  */
+void GPIO_DeInit(GPIO_TypeDef* GPIOx)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+  
+  if (GPIOx == GPIOA)
+  {
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE);
+  }
+  else if (GPIOx == GPIOB)
+  {
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE);
+  }
+  else if (GPIOx == GPIOC)
+  {
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE);
+  }
+  else if (GPIOx == GPIOD)
+  {
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE);
+  }    
+  else if (GPIOx == GPIOE)
+  {
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE);
+  } 
+  else if (GPIOx == GPIOF)
+  {
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE);
+  }
+  else
+  {
+    if (GPIOx == GPIOG)
+    {
+      RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE);
+      RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE);
+    }
+  }
+}
+
+/**
+  * @brief  Deinitializes the Alternate Functions (remap, event control
+  *   and EXTI configuration) registers to their default reset values.
+  * @param  None
+  * @retval None
+  */
+void GPIO_AFIODeInit(void)
+{
+  RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE);
+  RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE);
+}
+
+/**
+  * @brief  Initializes the GPIOx peripheral according to the specified
+  *         parameters in the GPIO_InitStruct.
+  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
+  * @param  GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that
+  *         contains the configuration information for the specified GPIO peripheral.
+  * @retval None
+  */
+void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct)
+{
+  uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00;
+  uint32_t tmpreg = 0x00, pinmask = 0x00;
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+  assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode));
+  assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin));  
+  
+/*---------------------------- GPIO Mode Configuration -----------------------*/
+  currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F);
+  if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00)
+  { 
+    /* Check the parameters */
+    assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed));
+    /* Output mode */
+    currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed;
+  }
+/*---------------------------- GPIO CRL Configuration ------------------------*/
+  /* Configure the eight low port pins */
+  if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00)
+  {
+    tmpreg = GPIOx->CRL;
+    for (pinpos = 0x00; pinpos < 0x08; pinpos++)
+    {
+      pos = ((uint32_t)0x01) << pinpos;
+      /* Get the port pins position */
+      currentpin = (GPIO_InitStruct->GPIO_Pin) & pos;
+      if (currentpin == pos)
+      {
+        pos = pinpos << 2;
+        /* Clear the corresponding low control register bits */
+        pinmask = ((uint32_t)0x0F) << pos;
+        tmpreg &= ~pinmask;
+        /* Write the mode configuration in the corresponding bits */
+        tmpreg |= (currentmode << pos);
+        /* Reset the corresponding ODR bit */
+        if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
+        {
+          GPIOx->BRR = (((uint32_t)0x01) << pinpos);
+        }
+        else
+        {
+          /* Set the corresponding ODR bit */
+          if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
+          {
+            GPIOx->BSRR = (((uint32_t)0x01) << pinpos);
+          }
+        }
+      }
+    }
+    GPIOx->CRL = tmpreg;
+  }
+/*---------------------------- GPIO CRH Configuration ------------------------*/
+  /* Configure the eight high port pins */
+  if (GPIO_InitStruct->GPIO_Pin > 0x00FF)
+  {
+    tmpreg = GPIOx->CRH;
+    for (pinpos = 0x00; pinpos < 0x08; pinpos++)
+    {
+      pos = (((uint32_t)0x01) << (pinpos + 0x08));
+      /* Get the port pins position */
+      currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos);
+      if (currentpin == pos)
+      {
+        pos = pinpos << 2;
+        /* Clear the corresponding high control register bits */
+        pinmask = ((uint32_t)0x0F) << pos;
+        tmpreg &= ~pinmask;
+        /* Write the mode configuration in the corresponding bits */
+        tmpreg |= (currentmode << pos);
+        /* Reset the corresponding ODR bit */
+        if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD)
+        {
+          GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08));
+        }
+        /* Set the corresponding ODR bit */
+        if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU)
+        {
+          GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08));
+        }
+      }
+    }
+    GPIOx->CRH = tmpreg;
+  }
+}
+
+/**
+  * @brief  Fills each GPIO_InitStruct member with its default value.
+  * @param  GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will
+  *         be initialized.
+  * @retval None
+  */
+void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct)
+{
+  /* Reset GPIO init structure parameters values */
+  GPIO_InitStruct->GPIO_Pin  = GPIO_Pin_All;
+  GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz;
+  GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING;
+}
+
+/**
+  * @brief  Reads the specified input port pin.
+  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
+  * @param  GPIO_Pin:  specifies the port bit to read.
+  *   This parameter can be GPIO_Pin_x where x can be (0..15).
+  * @retval The input port pin value.
+  */
+uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  uint8_t bitstatus = 0x00;
+  
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+  assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); 
+  
+  if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET)
+  {
+    bitstatus = (uint8_t)Bit_SET;
+  }
+  else
+  {
+    bitstatus = (uint8_t)Bit_RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Reads the specified GPIO input data port.
+  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
+  * @retval GPIO input data port value.
+  */
+uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+  
+  return ((uint16_t)GPIOx->IDR);
+}
+
+/**
+  * @brief  Reads the specified output data port bit.
+  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
+  * @param  GPIO_Pin:  specifies the port bit to read.
+  *   This parameter can be GPIO_Pin_x where x can be (0..15).
+  * @retval The output port pin value.
+  */
+uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  uint8_t bitstatus = 0x00;
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+  assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); 
+  
+  if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET)
+  {
+    bitstatus = (uint8_t)Bit_SET;
+  }
+  else
+  {
+    bitstatus = (uint8_t)Bit_RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Reads the specified GPIO output data port.
+  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
+  * @retval GPIO output data port value.
+  */
+uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+    
+  return ((uint16_t)GPIOx->ODR);
+}
+
+/**
+  * @brief  Sets the selected data port bits.
+  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
+  * @param  GPIO_Pin: specifies the port bits to be written.
+  *   This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+  * @retval None
+  */
+void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+  
+  GPIOx->BSRR = GPIO_Pin;
+}
+
+/**
+  * @brief  Clears the selected data port bits.
+  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
+  * @param  GPIO_Pin: specifies the port bits to be written.
+  *   This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+  * @retval None
+  */
+void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+  
+  GPIOx->BRR = GPIO_Pin;
+}
+
+/**
+  * @brief  Sets or clears the selected data port bit.
+  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
+  * @param  GPIO_Pin: specifies the port bit to be written.
+  *   This parameter can be one of GPIO_Pin_x where x can be (0..15).
+  * @param  BitVal: specifies the value to be written to the selected bit.
+  *   This parameter can be one of the BitAction enum values:
+  *     @arg Bit_RESET: to clear the port pin
+  *     @arg Bit_SET: to set the port pin
+  * @retval None
+  */
+void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+  assert_param(IS_GET_GPIO_PIN(GPIO_Pin));
+  assert_param(IS_GPIO_BIT_ACTION(BitVal)); 
+  
+  if (BitVal != Bit_RESET)
+  {
+    GPIOx->BSRR = GPIO_Pin;
+  }
+  else
+  {
+    GPIOx->BRR = GPIO_Pin;
+  }
+}
+
+/**
+  * @brief  Writes data to the specified GPIO data port.
+  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
+  * @param  PortVal: specifies the value to be written to the port output data register.
+  * @retval None
+  */
+void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal)
+{
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+  
+  GPIOx->ODR = PortVal;
+}
+
+/**
+  * @brief  Locks GPIO Pins configuration registers.
+  * @param  GPIOx: where x can be (A..G) to select the GPIO peripheral.
+  * @param  GPIO_Pin: specifies the port bit to be written.
+  *   This parameter can be any combination of GPIO_Pin_x where x can be (0..15).
+  * @retval None
+  */
+void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
+{
+  uint32_t tmp = 0x00010000;
+  
+  /* Check the parameters */
+  assert_param(IS_GPIO_ALL_PERIPH(GPIOx));
+  assert_param(IS_GPIO_PIN(GPIO_Pin));
+  
+  tmp |= GPIO_Pin;
+  /* Set LCKK bit */
+  GPIOx->LCKR = tmp;
+  /* Reset LCKK bit */
+  GPIOx->LCKR =  GPIO_Pin;
+  /* Set LCKK bit */
+  GPIOx->LCKR = tmp;
+  /* Read LCKK bit*/
+  tmp = GPIOx->LCKR;
+  /* Read LCKK bit*/
+  tmp = GPIOx->LCKR;
+}
+
+/**
+  * @brief  Selects the GPIO pin used as Event output.
+  * @param  GPIO_PortSource: selects the GPIO port to be used as source
+  *   for Event output.
+  *   This parameter can be GPIO_PortSourceGPIOx where x can be (A..E).
+  * @param  GPIO_PinSource: specifies the pin for the Event output.
+  *   This parameter can be GPIO_PinSourcex where x can be (0..15).
+  * @retval None
+  */
+void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
+{
+  uint32_t tmpreg = 0x00;
+  /* Check the parameters */
+  assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource));
+  assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
+    
+  tmpreg = AFIO->EVCR;
+  /* Clear the PORT[6:4] and PIN[3:0] bits */
+  tmpreg &= EVCR_PORTPINCONFIG_MASK;
+  tmpreg |= (uint32_t)GPIO_PortSource << 0x04;
+  tmpreg |= GPIO_PinSource;
+  AFIO->EVCR = tmpreg;
+}
+
+/**
+  * @brief  Enables or disables the Event Output.
+  * @param  NewState: new state of the Event output.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void GPIO_EventOutputCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Changes the mapping of the specified pin.
+  * @param  GPIO_Remap: selects the pin to remap.
+  *   This parameter can be one of the following values:
+  *     @arg GPIO_Remap_SPI1             : SPI1 Alternate Function mapping
+  *     @arg GPIO_Remap_I2C1             : I2C1 Alternate Function mapping
+  *     @arg GPIO_Remap_USART1           : USART1 Alternate Function mapping
+  *     @arg GPIO_Remap_USART2           : USART2 Alternate Function mapping
+  *     @arg GPIO_PartialRemap_USART3    : USART3 Partial Alternate Function mapping
+  *     @arg GPIO_FullRemap_USART3       : USART3 Full Alternate Function mapping
+  *     @arg GPIO_PartialRemap_TIM1      : TIM1 Partial Alternate Function mapping
+  *     @arg GPIO_FullRemap_TIM1         : TIM1 Full Alternate Function mapping
+  *     @arg GPIO_PartialRemap1_TIM2     : TIM2 Partial1 Alternate Function mapping
+  *     @arg GPIO_PartialRemap2_TIM2     : TIM2 Partial2 Alternate Function mapping
+  *     @arg GPIO_FullRemap_TIM2         : TIM2 Full Alternate Function mapping
+  *     @arg GPIO_PartialRemap_TIM3      : TIM3 Partial Alternate Function mapping
+  *     @arg GPIO_FullRemap_TIM3         : TIM3 Full Alternate Function mapping
+  *     @arg GPIO_Remap_TIM4             : TIM4 Alternate Function mapping
+  *     @arg GPIO_Remap1_CAN1            : CAN1 Alternate Function mapping
+  *     @arg GPIO_Remap2_CAN1            : CAN1 Alternate Function mapping
+  *     @arg GPIO_Remap_PD01             : PD01 Alternate Function mapping
+  *     @arg GPIO_Remap_TIM5CH4_LSI      : LSI connected to TIM5 Channel4 input capture for calibration
+  *     @arg GPIO_Remap_ADC1_ETRGINJ     : ADC1 External Trigger Injected Conversion remapping
+  *     @arg GPIO_Remap_ADC1_ETRGREG     : ADC1 External Trigger Regular Conversion remapping
+  *     @arg GPIO_Remap_ADC2_ETRGINJ     : ADC2 External Trigger Injected Conversion remapping
+  *     @arg GPIO_Remap_ADC2_ETRGREG     : ADC2 External Trigger Regular Conversion remapping
+  *     @arg GPIO_Remap_ETH              : Ethernet remapping (only for Connectivity line devices)
+  *     @arg GPIO_Remap_CAN2             : CAN2 remapping (only for Connectivity line devices)
+  *     @arg GPIO_Remap_SWJ_NoJTRST      : Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST
+  *     @arg GPIO_Remap_SWJ_JTAGDisable  : JTAG-DP Disabled and SW-DP Enabled
+  *     @arg GPIO_Remap_SWJ_Disable      : Full SWJ Disabled (JTAG-DP + SW-DP)
+  *     @arg GPIO_Remap_SPI3             : SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices)
+  *                                        When the SPI3/I2S3 is remapped using this function, the SWJ is configured
+  *                                        to Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST.   
+  *     @arg GPIO_Remap_TIM2ITR1_PTP_SOF : Ethernet PTP output or USB OTG SOF (Start of Frame) connected
+  *                                        to TIM2 Internal Trigger 1 for calibration (only for Connectivity line devices)
+  *                                        If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected to 
+  *                                        Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output.    
+  *     @arg GPIO_Remap_PTP_PPS          : Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices)
+  *     @arg GPIO_Remap_TIM15            : TIM15 Alternate Function mapping (only for Value line devices)
+  *     @arg GPIO_Remap_TIM16            : TIM16 Alternate Function mapping (only for Value line devices)
+  *     @arg GPIO_Remap_TIM17            : TIM17 Alternate Function mapping (only for Value line devices)
+  *     @arg GPIO_Remap_CEC              : CEC Alternate Function mapping (only for Value line devices)
+  *     @arg GPIO_Remap_TIM1_DMA         : TIM1 DMA requests mapping (only for Value line devices)
+  *     @arg GPIO_Remap_TIM9             : TIM9 Alternate Function mapping (only for XL-density devices)
+  *     @arg GPIO_Remap_TIM10            : TIM10 Alternate Function mapping (only for XL-density devices)
+  *     @arg GPIO_Remap_TIM11            : TIM11 Alternate Function mapping (only for XL-density devices)
+  *     @arg GPIO_Remap_TIM13            : TIM13 Alternate Function mapping (only for High density Value line and XL-density devices)
+  *     @arg GPIO_Remap_TIM14            : TIM14 Alternate Function mapping (only for High density Value line and XL-density devices)
+  *     @arg GPIO_Remap_FSMC_NADV        : FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices)
+  *     @arg GPIO_Remap_TIM67_DAC_DMA    : TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices)
+  *     @arg GPIO_Remap_TIM12            : TIM12 Alternate Function mapping (only for High density Value line devices)
+  *     @arg GPIO_Remap_MISC             : Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping, 
+  *                                        only for High density Value line devices)     
+  * @param  NewState: new state of the port pin remapping.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState)
+{
+  uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_GPIO_REMAP(GPIO_Remap));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));  
+  
+  if((GPIO_Remap & 0x80000000) == 0x80000000)
+  {
+    tmpreg = AFIO->MAPR2;
+  }
+  else
+  {
+    tmpreg = AFIO->MAPR;
+  }
+
+  tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10;
+  tmp = GPIO_Remap & LSB_MASK;
+
+  if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK))
+  {
+    tmpreg &= DBGAFR_SWJCFG_MASK;
+    AFIO->MAPR &= DBGAFR_SWJCFG_MASK;
+  }
+  else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK)
+  {
+    tmp1 = ((uint32_t)0x03) << tmpmask;
+    tmpreg &= ~tmp1;
+    tmpreg |= ~DBGAFR_SWJCFG_MASK;
+  }
+  else
+  {
+    tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10));
+    tmpreg |= ~DBGAFR_SWJCFG_MASK;
+  }
+
+  if (NewState != DISABLE)
+  {
+    tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10));
+  }
+
+  if((GPIO_Remap & 0x80000000) == 0x80000000)
+  {
+    AFIO->MAPR2 = tmpreg;
+  }
+  else
+  {
+    AFIO->MAPR = tmpreg;
+  }  
+}
+
+/**
+  * @brief  Selects the GPIO pin used as EXTI Line.
+  * @param  GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines.
+  *   This parameter can be GPIO_PortSourceGPIOx where x can be (A..G).
+  * @param  GPIO_PinSource: specifies the EXTI line to be configured.
+  *   This parameter can be GPIO_PinSourcex where x can be (0..15).
+  * @retval None
+  */
+void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource)
+{
+  uint32_t tmp = 0x00;
+  /* Check the parameters */
+  assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource));
+  assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource));
+  
+  tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03));
+  AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp;
+  AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)));
+}
+
+/**
+  * @brief  Selects the Ethernet media interface.
+  * @note   This function applies only to STM32 Connectivity line devices.  
+  * @param  GPIO_ETH_MediaInterface: specifies the Media Interface mode.
+  *   This parameter can be one of the following values:
+  *     @arg GPIO_ETH_MediaInterface_MII: MII mode
+  *     @arg GPIO_ETH_MediaInterface_RMII: RMII mode    
+  * @retval None
+  */
+void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface) 
+{ 
+  assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface)); 
+
+  /* Configure MII_RMII selection bit */ 
+  *(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface; 
+}
+  
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_i2c.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_i2c.c
new file mode 100644
index 0000000000000000000000000000000000000000..889672683fa9646c11ce36fbc51dbdc9f97f6b0a
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_i2c.c
@@ -0,0 +1,1331 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_i2c.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the I2C firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_rcc.h"
+
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup I2C 
+  * @brief I2C driver modules
+  * @{
+  */ 
+
+/** @defgroup I2C_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Private_Defines
+  * @{
+  */
+
+/* I2C SPE mask */
+#define CR1_PE_Set              ((uint16_t)0x0001)
+#define CR1_PE_Reset            ((uint16_t)0xFFFE)
+
+/* I2C START mask */
+#define CR1_START_Set           ((uint16_t)0x0100)
+#define CR1_START_Reset         ((uint16_t)0xFEFF)
+
+/* I2C STOP mask */
+#define CR1_STOP_Set            ((uint16_t)0x0200)
+#define CR1_STOP_Reset          ((uint16_t)0xFDFF)
+
+/* I2C ACK mask */
+#define CR1_ACK_Set             ((uint16_t)0x0400)
+#define CR1_ACK_Reset           ((uint16_t)0xFBFF)
+
+/* I2C ENGC mask */
+#define CR1_ENGC_Set            ((uint16_t)0x0040)
+#define CR1_ENGC_Reset          ((uint16_t)0xFFBF)
+
+/* I2C SWRST mask */
+#define CR1_SWRST_Set           ((uint16_t)0x8000)
+#define CR1_SWRST_Reset         ((uint16_t)0x7FFF)
+
+/* I2C PEC mask */
+#define CR1_PEC_Set             ((uint16_t)0x1000)
+#define CR1_PEC_Reset           ((uint16_t)0xEFFF)
+
+/* I2C ENPEC mask */
+#define CR1_ENPEC_Set           ((uint16_t)0x0020)
+#define CR1_ENPEC_Reset         ((uint16_t)0xFFDF)
+
+/* I2C ENARP mask */
+#define CR1_ENARP_Set           ((uint16_t)0x0010)
+#define CR1_ENARP_Reset         ((uint16_t)0xFFEF)
+
+/* I2C NOSTRETCH mask */
+#define CR1_NOSTRETCH_Set       ((uint16_t)0x0080)
+#define CR1_NOSTRETCH_Reset     ((uint16_t)0xFF7F)
+
+/* I2C registers Masks */
+#define CR1_CLEAR_Mask          ((uint16_t)0xFBF5)
+
+/* I2C DMAEN mask */
+#define CR2_DMAEN_Set           ((uint16_t)0x0800)
+#define CR2_DMAEN_Reset         ((uint16_t)0xF7FF)
+
+/* I2C LAST mask */
+#define CR2_LAST_Set            ((uint16_t)0x1000)
+#define CR2_LAST_Reset          ((uint16_t)0xEFFF)
+
+/* I2C FREQ mask */
+#define CR2_FREQ_Reset          ((uint16_t)0xFFC0)
+
+/* I2C ADD0 mask */
+#define OAR1_ADD0_Set           ((uint16_t)0x0001)
+#define OAR1_ADD0_Reset         ((uint16_t)0xFFFE)
+
+/* I2C ENDUAL mask */
+#define OAR2_ENDUAL_Set         ((uint16_t)0x0001)
+#define OAR2_ENDUAL_Reset       ((uint16_t)0xFFFE)
+
+/* I2C ADD2 mask */
+#define OAR2_ADD2_Reset         ((uint16_t)0xFF01)
+
+/* I2C F/S mask */
+#define CCR_FS_Set              ((uint16_t)0x8000)
+
+/* I2C CCR mask */
+#define CCR_CCR_Set             ((uint16_t)0x0FFF)
+
+/* I2C FLAG mask */
+#define FLAG_Mask               ((uint32_t)0x00FFFFFF)
+
+/* I2C Interrupt Enable mask */
+#define ITEN_Mask               ((uint32_t)0x07000000)
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup I2C_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the I2Cx peripheral registers to their default reset values.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @retval None
+  */
+void I2C_DeInit(I2C_TypeDef* I2Cx)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+  if (I2Cx == I2C1)
+  {
+    /* Enable I2C1 reset state */
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE);
+    /* Release I2C1 from reset state */
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE);
+  }
+  else
+  {
+    /* Enable I2C2 reset state */
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE);
+    /* Release I2C2 from reset state */
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE);
+  }
+}
+
+/**
+  * @brief  Initializes the I2Cx peripheral according to the specified 
+  *   parameters in the I2C_InitStruct.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  I2C_InitStruct: pointer to a I2C_InitTypeDef structure that
+  *   contains the configuration information for the specified I2C peripheral.
+  * @retval None
+  */
+void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct)
+{
+  uint16_t tmpreg = 0, freqrange = 0;
+  uint16_t result = 0x04;
+  uint32_t pclk1 = 8000000;
+  RCC_ClocksTypeDef  rcc_clocks;
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->I2C_ClockSpeed));
+  assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode));
+  assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle));
+  assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1));
+  assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack));
+  assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress));
+
+/*---------------------------- I2Cx CR2 Configuration ------------------------*/
+  /* Get the I2Cx CR2 value */
+  tmpreg = I2Cx->CR2;
+  /* Clear frequency FREQ[5:0] bits */
+  tmpreg &= CR2_FREQ_Reset;
+  /* Get pclk1 frequency value */
+  RCC_GetClocksFreq(&rcc_clocks);
+  pclk1 = rcc_clocks.PCLK1_Frequency;
+  /* Set frequency bits depending on pclk1 value */
+  freqrange = (uint16_t)(pclk1 / 1000000);
+  tmpreg |= freqrange;
+  /* Write to I2Cx CR2 */
+  I2Cx->CR2 = tmpreg;
+
+/*---------------------------- I2Cx CCR Configuration ------------------------*/
+  /* Disable the selected I2C peripheral to configure TRISE */
+  I2Cx->CR1 &= CR1_PE_Reset;
+  /* Reset tmpreg value */
+  /* Clear F/S, DUTY and CCR[11:0] bits */
+  tmpreg = 0;
+
+  /* Configure speed in standard mode */
+  if (I2C_InitStruct->I2C_ClockSpeed <= 100000)
+  {
+    /* Standard mode speed calculate */
+    result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1));
+    /* Test if CCR value is under 0x4*/
+    if (result < 0x04)
+    {
+      /* Set minimum allowed value */
+      result = 0x04;  
+    }
+    /* Set speed value for standard mode */
+    tmpreg |= result;	  
+    /* Set Maximum Rise Time for standard mode */
+    I2Cx->TRISE = freqrange + 1; 
+  }
+  /* Configure speed in fast mode */
+  else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/
+  {
+    if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2)
+    {
+      /* Fast mode speed calculate: Tlow/Thigh = 2 */
+      result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3));
+    }
+    else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/
+    {
+      /* Fast mode speed calculate: Tlow/Thigh = 16/9 */
+      result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25));
+      /* Set DUTY bit */
+      result |= I2C_DutyCycle_16_9;
+    }
+
+    /* Test if CCR value is under 0x1*/
+    if ((result & CCR_CCR_Set) == 0)
+    {
+      /* Set minimum allowed value */
+      result |= (uint16_t)0x0001;  
+    }
+    /* Set speed value and set F/S bit for fast mode */
+    tmpreg |= (uint16_t)(result | CCR_FS_Set);
+    /* Set Maximum Rise Time for fast mode */
+    I2Cx->TRISE = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1);  
+  }
+
+  /* Write to I2Cx CCR */
+  I2Cx->CCR = tmpreg;
+  /* Enable the selected I2C peripheral */
+  I2Cx->CR1 |= CR1_PE_Set;
+
+/*---------------------------- I2Cx CR1 Configuration ------------------------*/
+  /* Get the I2Cx CR1 value */
+  tmpreg = I2Cx->CR1;
+  /* Clear ACK, SMBTYPE and  SMBUS bits */
+  tmpreg &= CR1_CLEAR_Mask;
+  /* Configure I2Cx: mode and acknowledgement */
+  /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */
+  /* Set ACK bit according to I2C_Ack value */
+  tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack);
+  /* Write to I2Cx CR1 */
+  I2Cx->CR1 = tmpreg;
+
+/*---------------------------- I2Cx OAR1 Configuration -----------------------*/
+  /* Set I2Cx Own Address1 and acknowledged address */
+  I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1);
+}
+
+/**
+  * @brief  Fills each I2C_InitStruct member with its default value.
+  * @param  I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized.
+  * @retval None
+  */
+void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct)
+{
+/*---------------- Reset I2C init structure parameters values ----------------*/
+  /* initialize the I2C_ClockSpeed member */
+  I2C_InitStruct->I2C_ClockSpeed = 5000;
+  /* Initialize the I2C_Mode member */
+  I2C_InitStruct->I2C_Mode = I2C_Mode_I2C;
+  /* Initialize the I2C_DutyCycle member */
+  I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2;
+  /* Initialize the I2C_OwnAddress1 member */
+  I2C_InitStruct->I2C_OwnAddress1 = 0;
+  /* Initialize the I2C_Ack member */
+  I2C_InitStruct->I2C_Ack = I2C_Ack_Disable;
+  /* Initialize the I2C_AcknowledgedAddress member */
+  I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
+}
+
+/**
+  * @brief  Enables or disables the specified I2C peripheral.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2Cx peripheral. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected I2C peripheral */
+    I2Cx->CR1 |= CR1_PE_Set;
+  }
+  else
+  {
+    /* Disable the selected I2C peripheral */
+    I2Cx->CR1 &= CR1_PE_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified I2C DMA requests.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2C DMA transfer.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected I2C DMA requests */
+    I2Cx->CR2 |= CR2_DMAEN_Set;
+  }
+  else
+  {
+    /* Disable the selected I2C DMA requests */
+    I2Cx->CR2 &= CR2_DMAEN_Reset;
+  }
+}
+
+/**
+  * @brief  Specifies if the next DMA transfer will be the last one.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2C DMA last transfer.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Next DMA transfer is the last transfer */
+    I2Cx->CR2 |= CR2_LAST_Set;
+  }
+  else
+  {
+    /* Next DMA transfer is not the last transfer */
+    I2Cx->CR2 &= CR2_LAST_Reset;
+  }
+}
+
+/**
+  * @brief  Generates I2Cx communication START condition.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2C START condition generation.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None.
+  */
+void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Generate a START condition */
+    I2Cx->CR1 |= CR1_START_Set;
+  }
+  else
+  {
+    /* Disable the START condition generation */
+    I2Cx->CR1 &= CR1_START_Reset;
+  }
+}
+
+/**
+  * @brief  Generates I2Cx communication STOP condition.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2C STOP condition generation.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None.
+  */
+void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Generate a STOP condition */
+    I2Cx->CR1 |= CR1_STOP_Set;
+  }
+  else
+  {
+    /* Disable the STOP condition generation */
+    I2Cx->CR1 &= CR1_STOP_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified I2C acknowledge feature.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2C Acknowledgement.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None.
+  */
+void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the acknowledgement */
+    I2Cx->CR1 |= CR1_ACK_Set;
+  }
+  else
+  {
+    /* Disable the acknowledgement */
+    I2Cx->CR1 &= CR1_ACK_Reset;
+  }
+}
+
+/**
+  * @brief  Configures the specified I2C own address2.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  Address: specifies the 7bit I2C own address2.
+  * @retval None.
+  */
+void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address)
+{
+  uint16_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+  /* Get the old register value */
+  tmpreg = I2Cx->OAR2;
+
+  /* Reset I2Cx Own address2 bit [7:1] */
+  tmpreg &= OAR2_ADD2_Reset;
+
+  /* Set I2Cx Own address2 */
+  tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE);
+
+  /* Store the new register value */
+  I2Cx->OAR2 = tmpreg;
+}
+
+/**
+  * @brief  Enables or disables the specified I2C dual addressing mode.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2C dual addressing mode.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable dual addressing mode */
+    I2Cx->OAR2 |= OAR2_ENDUAL_Set;
+  }
+  else
+  {
+    /* Disable dual addressing mode */
+    I2Cx->OAR2 &= OAR2_ENDUAL_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified I2C general call feature.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2C General call.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable generall call */
+    I2Cx->CR1 |= CR1_ENGC_Set;
+  }
+  else
+  {
+    /* Disable generall call */
+    I2Cx->CR1 &= CR1_ENGC_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified I2C interrupts.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  I2C_IT: specifies the I2C interrupts sources to be enabled or disabled. 
+  *   This parameter can be any combination of the following values:
+  *     @arg I2C_IT_BUF: Buffer interrupt mask
+  *     @arg I2C_IT_EVT: Event interrupt mask
+  *     @arg I2C_IT_ERR: Error interrupt mask
+  * @param  NewState: new state of the specified I2C interrupts.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  assert_param(IS_I2C_CONFIG_IT(I2C_IT));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected I2C interrupts */
+    I2Cx->CR2 |= I2C_IT;
+  }
+  else
+  {
+    /* Disable the selected I2C interrupts */
+    I2Cx->CR2 &= (uint16_t)~I2C_IT;
+  }
+}
+
+/**
+  * @brief  Sends a data byte through the I2Cx peripheral.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  Data: Byte to be transmitted..
+  * @retval None
+  */
+void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  /* Write in the DR register the data to be sent */
+  I2Cx->DR = Data;
+}
+
+/**
+  * @brief  Returns the most recent received data by the I2Cx peripheral.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @retval The value of the received data.
+  */
+uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  /* Return the data in the DR register */
+  return (uint8_t)I2Cx->DR;
+}
+
+/**
+  * @brief  Transmits the address byte to select the slave device.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  Address: specifies the slave address which will be transmitted
+  * @param  I2C_Direction: specifies whether the I2C device will be a
+  *   Transmitter or a Receiver. This parameter can be one of the following values
+  *     @arg I2C_Direction_Transmitter: Transmitter mode
+  *     @arg I2C_Direction_Receiver: Receiver mode
+  * @retval None.
+  */
+void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_DIRECTION(I2C_Direction));
+  /* Test on the direction to set/reset the read/write bit */
+  if (I2C_Direction != I2C_Direction_Transmitter)
+  {
+    /* Set the address bit0 for read */
+    Address |= OAR1_ADD0_Set;
+  }
+  else
+  {
+    /* Reset the address bit0 for write */
+    Address &= OAR1_ADD0_Reset;
+  }
+  /* Send the address */
+  I2Cx->DR = Address;
+}
+
+/**
+  * @brief  Reads the specified I2C register and returns its value.
+  * @param  I2C_Register: specifies the register to read.
+  *   This parameter can be one of the following values:
+  *     @arg I2C_Register_CR1:  CR1 register.
+  *     @arg I2C_Register_CR2:   CR2 register.
+  *     @arg I2C_Register_OAR1:  OAR1 register.
+  *     @arg I2C_Register_OAR2:  OAR2 register.
+  *     @arg I2C_Register_DR:    DR register.
+  *     @arg I2C_Register_SR1:   SR1 register.
+  *     @arg I2C_Register_SR2:   SR2 register.
+  *     @arg I2C_Register_CCR:   CCR register.
+  *     @arg I2C_Register_TRISE: TRISE register.
+  * @retval The value of the read register.
+  */
+uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register)
+{
+  __IO uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_REGISTER(I2C_Register));
+
+  tmp = (uint32_t) I2Cx;
+  tmp += I2C_Register;
+
+  /* Return the selected register value */
+  return (*(__IO uint16_t *) tmp);
+}
+
+/**
+  * @brief  Enables or disables the specified I2C software reset.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2C software reset.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Peripheral under reset */
+    I2Cx->CR1 |= CR1_SWRST_Set;
+  }
+  else
+  {
+    /* Peripheral not under reset */
+    I2Cx->CR1 &= CR1_SWRST_Reset;
+  }
+}
+
+/**
+  * @brief  Selects the specified I2C NACK position in master receiver mode.
+  *         This function is useful in I2C Master Receiver mode when the number
+  *         of data to be received is equal to 2. In this case, this function 
+  *         should be called (with parameter I2C_NACKPosition_Next) before data 
+  *         reception starts,as described in the 2-byte reception procedure 
+  *         recommended in Reference Manual in Section: Master receiver.                
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  I2C_NACKPosition: specifies the NACK position. 
+  *   This parameter can be one of the following values:
+  *     @arg I2C_NACKPosition_Next: indicates that the next byte will be the last
+  *          received byte.  
+  *     @arg I2C_NACKPosition_Current: indicates that current byte is the last 
+  *          received byte.
+  *            
+  * @note    This function configures the same bit (POS) as I2C_PECPositionConfig() 
+  *          but is intended to be used in I2C mode while I2C_PECPositionConfig() 
+  *          is intended to used in SMBUS mode. 
+  *            
+  * @retval None
+  */
+void I2C_NACKPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_NACKPosition)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_NACK_POSITION(I2C_NACKPosition));
+  
+  /* Check the input parameter */
+  if (I2C_NACKPosition == I2C_NACKPosition_Next)
+  {
+    /* Next byte in shift register is the last received byte */
+    I2Cx->CR1 |= I2C_NACKPosition_Next;
+  }
+  else
+  {
+    /* Current byte in shift register is the last received byte */
+    I2Cx->CR1 &= I2C_NACKPosition_Current;
+  }
+}
+
+/**
+  * @brief  Drives the SMBusAlert pin high or low for the specified I2C.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  I2C_SMBusAlert: specifies SMBAlert pin level. 
+  *   This parameter can be one of the following values:
+  *     @arg I2C_SMBusAlert_Low: SMBAlert pin driven low
+  *     @arg I2C_SMBusAlert_High: SMBAlert pin driven high
+  * @retval None
+  */
+void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert));
+  if (I2C_SMBusAlert == I2C_SMBusAlert_Low)
+  {
+    /* Drive the SMBusAlert pin Low */
+    I2Cx->CR1 |= I2C_SMBusAlert_Low;
+  }
+  else
+  {
+    /* Drive the SMBusAlert pin High  */
+    I2Cx->CR1 &= I2C_SMBusAlert_High;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified I2C PEC transfer.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2C PEC transmission.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected I2C PEC transmission */
+    I2Cx->CR1 |= CR1_PEC_Set;
+  }
+  else
+  {
+    /* Disable the selected I2C PEC transmission */
+    I2Cx->CR1 &= CR1_PEC_Reset;
+  }
+}
+
+/**
+  * @brief  Selects the specified I2C PEC position.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  I2C_PECPosition: specifies the PEC position. 
+  *   This parameter can be one of the following values:
+  *     @arg I2C_PECPosition_Next: indicates that the next byte is PEC
+  *     @arg I2C_PECPosition_Current: indicates that current byte is PEC
+  *       
+  * @note    This function configures the same bit (POS) as I2C_NACKPositionConfig()
+  *          but is intended to be used in SMBUS mode while I2C_NACKPositionConfig() 
+  *          is intended to used in I2C mode.
+  *               
+  * @retval None
+  */
+void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition));
+  if (I2C_PECPosition == I2C_PECPosition_Next)
+  {
+    /* Next byte in shift register is PEC */
+    I2Cx->CR1 |= I2C_PECPosition_Next;
+  }
+  else
+  {
+    /* Current byte in shift register is PEC */
+    I2Cx->CR1 &= I2C_PECPosition_Current;
+  }
+}
+
+/**
+  * @brief  Enables or disables the PEC value calculation of the transferred bytes.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2Cx PEC value calculation.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected I2C PEC calculation */
+    I2Cx->CR1 |= CR1_ENPEC_Set;
+  }
+  else
+  {
+    /* Disable the selected I2C PEC calculation */
+    I2Cx->CR1 &= CR1_ENPEC_Reset;
+  }
+}
+
+/**
+  * @brief  Returns the PEC value for the specified I2C.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @retval The PEC value.
+  */
+uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  /* Return the selected I2C PEC value */
+  return ((I2Cx->SR2) >> 8);
+}
+
+/**
+  * @brief  Enables or disables the specified I2C ARP.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2Cx ARP. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected I2C ARP */
+    I2Cx->CR1 |= CR1_ENARP_Set;
+  }
+  else
+  {
+    /* Disable the selected I2C ARP */
+    I2Cx->CR1 &= CR1_ENARP_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified I2C Clock stretching.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  NewState: new state of the I2Cx Clock stretching.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState == DISABLE)
+  {
+    /* Enable the selected I2C Clock stretching */
+    I2Cx->CR1 |= CR1_NOSTRETCH_Set;
+  }
+  else
+  {
+    /* Disable the selected I2C Clock stretching */
+    I2Cx->CR1 &= CR1_NOSTRETCH_Reset;
+  }
+}
+
+/**
+  * @brief  Selects the specified I2C fast mode duty cycle.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  I2C_DutyCycle: specifies the fast mode duty cycle.
+  *   This parameter can be one of the following values:
+  *     @arg I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2
+  *     @arg I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9
+  * @retval None
+  */
+void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle)
+{
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle));
+  if (I2C_DutyCycle != I2C_DutyCycle_16_9)
+  {
+    /* I2C fast mode Tlow/Thigh=2 */
+    I2Cx->CCR &= I2C_DutyCycle_2;
+  }
+  else
+  {
+    /* I2C fast mode Tlow/Thigh=16/9 */
+    I2Cx->CCR |= I2C_DutyCycle_16_9;
+  }
+}
+
+
+
+/**
+ * @brief
+ ****************************************************************************************
+ *
+ *                         I2C State Monitoring Functions
+ *                       
+ ****************************************************************************************   
+ * This I2C driver provides three different ways for I2C state monitoring
+ *  depending on the application requirements and constraints:
+ *        
+ *  
+ * 1) Basic state monitoring:
+ *    Using I2C_CheckEvent() function:
+ *    It compares the status registers (SR1 and SR2) content to a given event
+ *    (can be the combination of one or more flags).
+ *    It returns SUCCESS if the current status includes the given flags 
+ *    and returns ERROR if one or more flags are missing in the current status.
+ *    - When to use:
+ *      - This function is suitable for most applications as well as for startup 
+ *      activity since the events are fully described in the product reference manual 
+ *      (RM0008).
+ *      - It is also suitable for users who need to define their own events.
+ *    - Limitations:
+ *      - If an error occurs (ie. error flags are set besides to the monitored flags),
+ *        the I2C_CheckEvent() function may return SUCCESS despite the communication
+ *        hold or corrupted real state. 
+ *        In this case, it is advised to use error interrupts to monitor the error
+ *        events and handle them in the interrupt IRQ handler.
+ *        
+ *        @note 
+ *        For error management, it is advised to use the following functions:
+ *          - I2C_ITConfig() to configure and enable the error interrupts (I2C_IT_ERR).
+ *          - I2Cx_ER_IRQHandler() which is called when the error interrupt occurs.
+ *            Where x is the peripheral instance (I2C1, I2C2 ...)
+ *          - I2C_GetFlagStatus() or I2C_GetITStatus() to be called into I2Cx_ER_IRQHandler() 
+ *            in order to determine which error occured.
+ *          - I2C_ClearFlag() or I2C_ClearITPendingBit() and/or I2C_SoftwareResetCmd()
+ *            and/or I2C_GenerateStop() in order to clear the error flag and source,
+ *            and return to correct communication status.
+ *            
+ *
+ *  2) Advanced state monitoring:
+ *     Using the function I2C_GetLastEvent() which returns the image of both status 
+ *     registers in a single word (uint32_t) (Status Register 2 value is shifted left 
+ *     by 16 bits and concatenated to Status Register 1).
+ *     - When to use:
+ *       - This function is suitable for the same applications above but it allows to
+ *         overcome the mentioned limitation of I2C_GetFlagStatus() function.
+ *         The returned value could be compared to events already defined in the 
+ *         library (stm32f10x_i2c.h) or to custom values defined by user.
+ *       - This function is suitable when multiple flags are monitored at the same time.
+ *       - At the opposite of I2C_CheckEvent() function, this function allows user to
+ *         choose when an event is accepted (when all events flags are set and no 
+ *         other flags are set or just when the needed flags are set like 
+ *         I2C_CheckEvent() function).
+ *     - Limitations:
+ *       - User may need to define his own events.
+ *       - Same remark concerning the error management is applicable for this 
+ *         function if user decides to check only regular communication flags (and 
+ *         ignores error flags).
+ *     
+ *
+ *  3) Flag-based state monitoring:
+ *     Using the function I2C_GetFlagStatus() which simply returns the status of 
+ *     one single flag (ie. I2C_FLAG_RXNE ...). 
+ *     - When to use:
+ *        - This function could be used for specific applications or in debug phase.
+ *        - It is suitable when only one flag checking is needed (most I2C events 
+ *          are monitored through multiple flags).
+ *     - Limitations: 
+ *        - When calling this function, the Status register is accessed. Some flags are
+ *          cleared when the status register is accessed. So checking the status
+ *          of one Flag, may clear other ones.
+ *        - Function may need to be called twice or more in order to monitor one 
+ *          single event.
+ *
+ *  For detailed description of Events, please refer to section I2C_Events in 
+ *  stm32f10x_i2c.h file.
+ *  
+ */
+
+/**
+ * 
+ *  1) Basic state monitoring
+ *******************************************************************************
+ */
+
+/**
+  * @brief  Checks whether the last I2Cx Event is equal to the one passed
+  *   as parameter.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  I2C_EVENT: specifies the event to be checked. 
+  *   This parameter can be one of the following values:
+  *     @arg I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED           : EV1
+  *     @arg I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED              : EV1
+  *     @arg I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED     : EV1
+  *     @arg I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED        : EV1
+  *     @arg I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED            : EV1
+  *     @arg I2C_EVENT_SLAVE_BYTE_RECEIVED                         : EV2
+  *     @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)      : EV2
+  *     @arg (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)    : EV2
+  *     @arg I2C_EVENT_SLAVE_BYTE_TRANSMITTED                      : EV3
+  *     @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)   : EV3
+  *     @arg (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL) : EV3
+  *     @arg I2C_EVENT_SLAVE_ACK_FAILURE                           : EV3_2
+  *     @arg I2C_EVENT_SLAVE_STOP_DETECTED                         : EV4
+  *     @arg I2C_EVENT_MASTER_MODE_SELECT                          : EV5
+  *     @arg I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED            : EV6     
+  *     @arg I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED               : EV6
+  *     @arg I2C_EVENT_MASTER_BYTE_RECEIVED                        : EV7
+  *     @arg I2C_EVENT_MASTER_BYTE_TRANSMITTING                    : EV8
+  *     @arg I2C_EVENT_MASTER_BYTE_TRANSMITTED                     : EV8_2
+  *     @arg I2C_EVENT_MASTER_MODE_ADDRESS10                       : EV9
+  *     
+  * @note: For detailed description of Events, please refer to section 
+  *    I2C_Events in stm32f10x_i2c.h file.
+  *    
+  * @retval An ErrorStatus enumeration value:
+  * - SUCCESS: Last event is equal to the I2C_EVENT
+  * - ERROR: Last event is different from the I2C_EVENT
+  */
+ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT)
+{
+  uint32_t lastevent = 0;
+  uint32_t flag1 = 0, flag2 = 0;
+  ErrorStatus status = ERROR;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_EVENT(I2C_EVENT));
+
+  /* Read the I2Cx status register */
+  flag1 = I2Cx->SR1;
+  flag2 = I2Cx->SR2;
+  flag2 = flag2 << 16;
+
+  /* Get the last event value from I2C status register */
+  lastevent = (flag1 | flag2) & FLAG_Mask;
+
+  /* Check whether the last event contains the I2C_EVENT */
+  if ((lastevent & I2C_EVENT) == I2C_EVENT)
+  {
+    /* SUCCESS: last event is equal to I2C_EVENT */
+    status = SUCCESS;
+  }
+  else
+  {
+    /* ERROR: last event is different from I2C_EVENT */
+    status = ERROR;
+  }
+  /* Return status */
+  return status;
+}
+
+/**
+ * 
+ *  2) Advanced state monitoring
+ *******************************************************************************
+ */
+
+/**
+  * @brief  Returns the last I2Cx Event.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  *     
+  * @note: For detailed description of Events, please refer to section 
+  *    I2C_Events in stm32f10x_i2c.h file.
+  *    
+  * @retval The last event
+  */
+uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx)
+{
+  uint32_t lastevent = 0;
+  uint32_t flag1 = 0, flag2 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+
+  /* Read the I2Cx status register */
+  flag1 = I2Cx->SR1;
+  flag2 = I2Cx->SR2;
+  flag2 = flag2 << 16;
+
+  /* Get the last event value from I2C status register */
+  lastevent = (flag1 | flag2) & FLAG_Mask;
+
+  /* Return status */
+  return lastevent;
+}
+
+/**
+ * 
+ *  3) Flag-based state monitoring
+ *******************************************************************************
+ */
+
+/**
+  * @brief  Checks whether the specified I2C flag is set or not.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  I2C_FLAG: specifies the flag to check. 
+  *   This parameter can be one of the following values:
+  *     @arg I2C_FLAG_DUALF: Dual flag (Slave mode)
+  *     @arg I2C_FLAG_SMBHOST: SMBus host header (Slave mode)
+  *     @arg I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode)
+  *     @arg I2C_FLAG_GENCALL: General call header flag (Slave mode)
+  *     @arg I2C_FLAG_TRA: Transmitter/Receiver flag
+  *     @arg I2C_FLAG_BUSY: Bus busy flag
+  *     @arg I2C_FLAG_MSL: Master/Slave flag
+  *     @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+  *     @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+  *     @arg I2C_FLAG_PECERR: PEC error in reception flag
+  *     @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+  *     @arg I2C_FLAG_AF: Acknowledge failure flag
+  *     @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+  *     @arg I2C_FLAG_BERR: Bus error flag
+  *     @arg I2C_FLAG_TXE: Data register empty flag (Transmitter)
+  *     @arg I2C_FLAG_RXNE: Data register not empty (Receiver) flag
+  *     @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode)
+  *     @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode)
+  *     @arg I2C_FLAG_BTF: Byte transfer finished flag
+  *     @arg I2C_FLAG_ADDR: Address sent flag (Master mode) "ADSL"
+  *   Address matched flag (Slave mode)"ENDA"
+  *     @arg I2C_FLAG_SB: Start bit flag (Master mode)
+  * @retval The new state of I2C_FLAG (SET or RESET).
+  */
+FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  __IO uint32_t i2creg = 0, i2cxbase = 0;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_GET_FLAG(I2C_FLAG));
+
+  /* Get the I2Cx peripheral base address */
+  i2cxbase = (uint32_t)I2Cx;
+  
+  /* Read flag register index */
+  i2creg = I2C_FLAG >> 28;
+  
+  /* Get bit[23:0] of the flag */
+  I2C_FLAG &= FLAG_Mask;
+  
+  if(i2creg != 0)
+  {
+    /* Get the I2Cx SR1 register address */
+    i2cxbase += 0x14;
+  }
+  else
+  {
+    /* Flag in I2Cx SR2 Register */
+    I2C_FLAG = (uint32_t)(I2C_FLAG >> 16);
+    /* Get the I2Cx SR2 register address */
+    i2cxbase += 0x18;
+  }
+  
+  if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET)
+  {
+    /* I2C_FLAG is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* I2C_FLAG is reset */
+    bitstatus = RESET;
+  }
+  
+  /* Return the I2C_FLAG status */
+  return  bitstatus;
+}
+
+
+
+/**
+  * @brief  Clears the I2Cx's pending flags.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  I2C_FLAG: specifies the flag to clear. 
+  *   This parameter can be any combination of the following values:
+  *     @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+  *     @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+  *     @arg I2C_FLAG_PECERR: PEC error in reception flag
+  *     @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+  *     @arg I2C_FLAG_AF: Acknowledge failure flag
+  *     @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+  *     @arg I2C_FLAG_BERR: Bus error flag
+  *   
+  * @note
+  *   - STOPF (STOP detection) is cleared by software sequence: a read operation 
+  *     to I2C_SR1 register (I2C_GetFlagStatus()) followed by a write operation 
+  *     to I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral).
+  *   - ADD10 (10-bit header sent) is cleared by software sequence: a read 
+  *     operation to I2C_SR1 (I2C_GetFlagStatus()) followed by writing the 
+  *     second byte of the address in DR register.
+  *   - BTF (Byte Transfer Finished) is cleared by software sequence: a read 
+  *     operation to I2C_SR1 register (I2C_GetFlagStatus()) followed by a 
+  *     read/write to I2C_DR register (I2C_SendData()).
+  *   - ADDR (Address sent) is cleared by software sequence: a read operation to 
+  *     I2C_SR1 register (I2C_GetFlagStatus()) followed by a read operation to 
+  *     I2C_SR2 register ((void)(I2Cx->SR2)).
+  *   - SB (Start Bit) is cleared software sequence: a read operation to I2C_SR1
+  *     register (I2C_GetFlagStatus()) followed by a write operation to I2C_DR
+  *     register  (I2C_SendData()).
+  * @retval None
+  */
+void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG)
+{
+  uint32_t flagpos = 0;
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG));
+  /* Get the I2C flag position */
+  flagpos = I2C_FLAG & FLAG_Mask;
+  /* Clear the selected I2C flag */
+  I2Cx->SR1 = (uint16_t)~flagpos;
+}
+
+/**
+  * @brief  Checks whether the specified I2C interrupt has occurred or not.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  I2C_IT: specifies the interrupt source to check. 
+  *   This parameter can be one of the following values:
+  *     @arg I2C_IT_SMBALERT: SMBus Alert flag
+  *     @arg I2C_IT_TIMEOUT: Timeout or Tlow error flag
+  *     @arg I2C_IT_PECERR: PEC error in reception flag
+  *     @arg I2C_IT_OVR: Overrun/Underrun flag (Slave mode)
+  *     @arg I2C_IT_AF: Acknowledge failure flag
+  *     @arg I2C_IT_ARLO: Arbitration lost flag (Master mode)
+  *     @arg I2C_IT_BERR: Bus error flag
+  *     @arg I2C_IT_TXE: Data register empty flag (Transmitter)
+  *     @arg I2C_IT_RXNE: Data register not empty (Receiver) flag
+  *     @arg I2C_IT_STOPF: Stop detection flag (Slave mode)
+  *     @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode)
+  *     @arg I2C_IT_BTF: Byte transfer finished flag
+  *     @arg I2C_IT_ADDR: Address sent flag (Master mode) "ADSL"
+  *                       Address matched flag (Slave mode)"ENDAD"
+  *     @arg I2C_IT_SB: Start bit flag (Master mode)
+  * @retval The new state of I2C_IT (SET or RESET).
+  */
+ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
+{
+  ITStatus bitstatus = RESET;
+  uint32_t enablestatus = 0;
+
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_GET_IT(I2C_IT));
+
+  /* Check if the interrupt source is enabled or not */
+  enablestatus = (uint32_t)(((I2C_IT & ITEN_Mask) >> 16) & (I2Cx->CR2)) ;
+  
+  /* Get bit[23:0] of the flag */
+  I2C_IT &= FLAG_Mask;
+
+  /* Check the status of the specified I2C flag */
+  if (((I2Cx->SR1 & I2C_IT) != (uint32_t)RESET) && enablestatus)
+  {
+    /* I2C_IT is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* I2C_IT is reset */
+    bitstatus = RESET;
+  }
+  /* Return the I2C_IT status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the I2Cx’s interrupt pending bits.
+  * @param  I2Cx: where x can be 1 or 2 to select the I2C peripheral.
+  * @param  I2C_IT: specifies the interrupt pending bit to clear. 
+  *   This parameter can be any combination of the following values:
+  *     @arg I2C_IT_SMBALERT: SMBus Alert interrupt
+  *     @arg I2C_IT_TIMEOUT: Timeout or Tlow error interrupt
+  *     @arg I2C_IT_PECERR: PEC error in reception  interrupt
+  *     @arg I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode)
+  *     @arg I2C_IT_AF: Acknowledge failure interrupt
+  *     @arg I2C_IT_ARLO: Arbitration lost interrupt (Master mode)
+  *     @arg I2C_IT_BERR: Bus error interrupt
+  *   
+  * @note
+  *   - STOPF (STOP detection) is cleared by software sequence: a read operation 
+  *     to I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to 
+  *     I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral).
+  *   - ADD10 (10-bit header sent) is cleared by software sequence: a read 
+  *     operation to I2C_SR1 (I2C_GetITStatus()) followed by writing the second 
+  *     byte of the address in I2C_DR register.
+  *   - BTF (Byte Transfer Finished) is cleared by software sequence: a read 
+  *     operation to I2C_SR1 register (I2C_GetITStatus()) followed by a 
+  *     read/write to I2C_DR register (I2C_SendData()).
+  *   - ADDR (Address sent) is cleared by software sequence: a read operation to 
+  *     I2C_SR1 register (I2C_GetITStatus()) followed by a read operation to 
+  *     I2C_SR2 register ((void)(I2Cx->SR2)).
+  *   - SB (Start Bit) is cleared by software sequence: a read operation to 
+  *     I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to 
+  *     I2C_DR register (I2C_SendData()).
+  * @retval None
+  */
+void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT)
+{
+  uint32_t flagpos = 0;
+  /* Check the parameters */
+  assert_param(IS_I2C_ALL_PERIPH(I2Cx));
+  assert_param(IS_I2C_CLEAR_IT(I2C_IT));
+  /* Get the I2C flag position */
+  flagpos = I2C_IT & FLAG_Mask;
+  /* Clear the selected I2C flag */
+  I2Cx->SR1 = (uint16_t)~flagpos;
+}
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_iwdg.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_iwdg.c
new file mode 100644
index 0000000000000000000000000000000000000000..9d3b0e855a13e9e6ce1b400604bc321a3dd10a96
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_iwdg.c
@@ -0,0 +1,190 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_iwdg.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the IWDG firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_iwdg.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup IWDG 
+  * @brief IWDG driver modules
+  * @{
+  */ 
+
+/** @defgroup IWDG_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Private_Defines
+  * @{
+  */ 
+
+/* ---------------------- IWDG registers bit mask ----------------------------*/
+
+/* KR register bit mask */
+#define KR_KEY_Reload    ((uint16_t)0xAAAA)
+#define KR_KEY_Enable    ((uint16_t)0xCCCC)
+
+/**
+  * @}
+  */ 
+
+/** @defgroup IWDG_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup IWDG_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Enables or disables write access to IWDG_PR and IWDG_RLR registers.
+  * @param  IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers.
+  *   This parameter can be one of the following values:
+  *     @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers
+  *     @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers
+  * @retval None
+  */
+void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess)
+{
+  /* Check the parameters */
+  assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess));
+  IWDG->KR = IWDG_WriteAccess;
+}
+
+/**
+  * @brief  Sets IWDG Prescaler value.
+  * @param  IWDG_Prescaler: specifies the IWDG Prescaler value.
+  *   This parameter can be one of the following values:
+  *     @arg IWDG_Prescaler_4: IWDG prescaler set to 4
+  *     @arg IWDG_Prescaler_8: IWDG prescaler set to 8
+  *     @arg IWDG_Prescaler_16: IWDG prescaler set to 16
+  *     @arg IWDG_Prescaler_32: IWDG prescaler set to 32
+  *     @arg IWDG_Prescaler_64: IWDG prescaler set to 64
+  *     @arg IWDG_Prescaler_128: IWDG prescaler set to 128
+  *     @arg IWDG_Prescaler_256: IWDG prescaler set to 256
+  * @retval None
+  */
+void IWDG_SetPrescaler(uint8_t IWDG_Prescaler)
+{
+  /* Check the parameters */
+  assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler));
+  IWDG->PR = IWDG_Prescaler;
+}
+
+/**
+  * @brief  Sets IWDG Reload value.
+  * @param  Reload: specifies the IWDG Reload value.
+  *   This parameter must be a number between 0 and 0x0FFF.
+  * @retval None
+  */
+void IWDG_SetReload(uint16_t Reload)
+{
+  /* Check the parameters */
+  assert_param(IS_IWDG_RELOAD(Reload));
+  IWDG->RLR = Reload;
+}
+
+/**
+  * @brief  Reloads IWDG counter with value defined in the reload register
+  *   (write access to IWDG_PR and IWDG_RLR registers disabled).
+  * @param  None
+  * @retval None
+  */
+void IWDG_ReloadCounter(void)
+{
+  IWDG->KR = KR_KEY_Reload;
+}
+
+/**
+  * @brief  Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled).
+  * @param  None
+  * @retval None
+  */
+void IWDG_Enable(void)
+{
+  IWDG->KR = KR_KEY_Enable;
+}
+
+/**
+  * @brief  Checks whether the specified IWDG flag is set or not.
+  * @param  IWDG_FLAG: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg IWDG_FLAG_PVU: Prescaler Value Update on going
+  *     @arg IWDG_FLAG_RVU: Reload Value Update on going
+  * @retval The new state of IWDG_FLAG (SET or RESET).
+  */
+FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_IWDG_FLAG(IWDG_FLAG));
+  if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  /* Return the flag status */
+  return bitstatus;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_pwr.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_pwr.c
new file mode 100644
index 0000000000000000000000000000000000000000..147bf0f8d6affd110dd1d564fa18152ac1dc4629
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_pwr.c
@@ -0,0 +1,307 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_pwr.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the PWR firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup PWR 
+  * @brief PWR driver modules
+  * @{
+  */ 
+
+/** @defgroup PWR_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Private_Defines
+  * @{
+  */
+
+/* --------- PWR registers bit address in the alias region ---------- */
+#define PWR_OFFSET               (PWR_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+
+/* Alias word address of DBP bit */
+#define CR_OFFSET                (PWR_OFFSET + 0x00)
+#define DBP_BitNumber            0x08
+#define CR_DBP_BB                (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BitNumber           0x04
+#define CR_PVDE_BB               (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of EWUP bit */
+#define CSR_OFFSET               (PWR_OFFSET + 0x04)
+#define EWUP_BitNumber           0x08
+#define CSR_EWUP_BB              (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))
+
+/* ------------------ PWR registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_DS_MASK               ((uint32_t)0xFFFFFFFC)
+#define CR_PLS_MASK              ((uint32_t)0xFFFFFF1F)
+
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the PWR peripheral registers to their default reset values.
+  * @param  None
+  * @retval None
+  */
+void PWR_DeInit(void)
+{
+  RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE);
+  RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE);
+}
+
+/**
+  * @brief  Enables or disables access to the RTC and backup registers.
+  * @param  NewState: new state of the access to the RTC and backup registers.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void PWR_BackupAccessCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Enables or disables the Power Voltage Detector(PVD).
+  * @param  NewState: new state of the PVD.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void PWR_PVDCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Configures the voltage threshold detected by the Power Voltage Detector(PVD).
+  * @param  PWR_PVDLevel: specifies the PVD detection level
+  *   This parameter can be one of the following values:
+  *     @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V
+  *     @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V
+  *     @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V
+  *     @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V
+  *     @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V
+  *     @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V
+  *     @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V
+  *     @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V
+  * @retval None
+  */
+void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel));
+  tmpreg = PWR->CR;
+  /* Clear PLS[7:5] bits */
+  tmpreg &= CR_PLS_MASK;
+  /* Set PLS[7:5] bits according to PWR_PVDLevel value */
+  tmpreg |= PWR_PVDLevel;
+  /* Store the new value */
+  PWR->CR = tmpreg;
+}
+
+/**
+  * @brief  Enables or disables the WakeUp Pin functionality.
+  * @param  NewState: new state of the WakeUp Pin functionality.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void PWR_WakeUpPinCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Enters STOP mode.
+  * @param  PWR_Regulator: specifies the regulator state in STOP mode.
+  *   This parameter can be one of the following values:
+  *     @arg PWR_Regulator_ON: STOP mode with regulator ON
+  *     @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode
+  * @param  PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
+  *   This parameter can be one of the following values:
+  *     @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction
+  *     @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction
+  * @retval None
+  */
+void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_PWR_REGULATOR(PWR_Regulator));
+  assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry));
+  
+  /* Select the regulator state in STOP mode ---------------------------------*/
+  tmpreg = PWR->CR;
+  /* Clear PDDS and LPDS bits */
+  tmpreg &= CR_DS_MASK;
+  /* Set LPDS bit according to PWR_Regulator value */
+  tmpreg |= PWR_Regulator;
+  /* Store the new value */
+  PWR->CR = tmpreg;
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR |= SCB_SCR_SLEEPDEEP;
+  
+  /* Select STOP mode entry --------------------------------------------------*/
+  if(PWR_STOPEntry == PWR_STOPEntry_WFI)
+  {   
+    /* Request Wait For Interrupt */
+    __WFI();
+  }
+  else
+  {
+    /* Request Wait For Event */
+    __WFE();
+  }
+  
+  /* Reset SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP);  
+}
+
+/**
+  * @brief  Enters STANDBY mode.
+  * @param  None
+  * @retval None
+  */
+void PWR_EnterSTANDBYMode(void)
+{
+  /* Clear Wake-up flag */
+  PWR->CR |= PWR_CR_CWUF;
+  /* Select STANDBY mode */
+  PWR->CR |= PWR_CR_PDDS;
+  /* Set SLEEPDEEP bit of Cortex System Control Register */
+  SCB->SCR |= SCB_SCR_SLEEPDEEP;
+/* This option is used to ensure that store operations are completed */
+#if defined ( __CC_ARM   )
+  __force_stores();
+#endif
+  /* Request Wait For Interrupt */
+  __WFI();
+}
+
+/**
+  * @brief  Checks whether the specified PWR flag is set or not.
+  * @param  PWR_FLAG: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg PWR_FLAG_WU: Wake Up flag
+  *     @arg PWR_FLAG_SB: StandBy flag
+  *     @arg PWR_FLAG_PVDO: PVD Output
+  * @retval The new state of PWR_FLAG (SET or RESET).
+  */
+FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_PWR_GET_FLAG(PWR_FLAG));
+  
+  if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  /* Return the flag status */
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the PWR's pending flags.
+  * @param  PWR_FLAG: specifies the flag to clear.
+  *   This parameter can be one of the following values:
+  *     @arg PWR_FLAG_WU: Wake Up flag
+  *     @arg PWR_FLAG_SB: StandBy flag
+  * @retval None
+  */
+void PWR_ClearFlag(uint32_t PWR_FLAG)
+{
+  /* Check the parameters */
+  assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG));
+         
+  PWR->CR |=  PWR_FLAG << 2;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_rcc.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_rcc.c
new file mode 100644
index 0000000000000000000000000000000000000000..4b2ec1f10440ec2b59eef483cbe6d4dac74adcaf
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_rcc.c
@@ -0,0 +1,1470 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_rcc.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the RCC firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup RCC 
+  * @brief RCC driver modules
+  * @{
+  */ 
+
+/** @defgroup RCC_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Private_Defines
+  * @{
+  */
+
+/* ------------ RCC registers bit address in the alias region ----------- */
+#define RCC_OFFSET                (RCC_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+
+/* Alias word address of HSION bit */
+#define CR_OFFSET                 (RCC_OFFSET + 0x00)
+#define HSION_BitNumber           0x00
+#define CR_HSION_BB               (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4))
+
+/* Alias word address of PLLON bit */
+#define PLLON_BitNumber           0x18
+#define CR_PLLON_BB               (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4))
+
+#ifdef STM32F10X_CL
+ /* Alias word address of PLL2ON bit */
+ #define PLL2ON_BitNumber          0x1A
+ #define CR_PLL2ON_BB              (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL2ON_BitNumber * 4))
+
+ /* Alias word address of PLL3ON bit */
+ #define PLL3ON_BitNumber          0x1C
+ #define CR_PLL3ON_BB              (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL3ON_BitNumber * 4))
+#endif /* STM32F10X_CL */ 
+
+/* Alias word address of CSSON bit */
+#define CSSON_BitNumber           0x13
+#define CR_CSSON_BB               (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4))
+
+/* --- CFGR Register ---*/
+
+/* Alias word address of USBPRE bit */
+#define CFGR_OFFSET               (RCC_OFFSET + 0x04)
+
+#ifndef STM32F10X_CL
+ #define USBPRE_BitNumber          0x16
+ #define CFGR_USBPRE_BB            (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4))
+#else
+ #define OTGFSPRE_BitNumber        0x16
+ #define CFGR_OTGFSPRE_BB          (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (OTGFSPRE_BitNumber * 4))
+#endif /* STM32F10X_CL */ 
+
+/* --- BDCR Register ---*/
+
+/* Alias word address of RTCEN bit */
+#define BDCR_OFFSET               (RCC_OFFSET + 0x20)
+#define RTCEN_BitNumber           0x0F
+#define BDCR_RTCEN_BB             (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4))
+
+/* Alias word address of BDRST bit */
+#define BDRST_BitNumber           0x10
+#define BDCR_BDRST_BB             (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4))
+
+/* --- CSR Register ---*/
+
+/* Alias word address of LSION bit */
+#define CSR_OFFSET                (RCC_OFFSET + 0x24)
+#define LSION_BitNumber           0x00
+#define CSR_LSION_BB              (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4))
+
+#ifdef STM32F10X_CL
+/* --- CFGR2 Register ---*/
+
+ /* Alias word address of I2S2SRC bit */
+ #define CFGR2_OFFSET              (RCC_OFFSET + 0x2C)
+ #define I2S2SRC_BitNumber         0x11
+ #define CFGR2_I2S2SRC_BB          (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S2SRC_BitNumber * 4))
+
+ /* Alias word address of I2S3SRC bit */
+ #define I2S3SRC_BitNumber         0x12
+ #define CFGR2_I2S3SRC_BB          (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S3SRC_BitNumber * 4))
+#endif /* STM32F10X_CL */
+
+/* ---------------------- RCC registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_HSEBYP_Reset           ((uint32_t)0xFFFBFFFF)
+#define CR_HSEBYP_Set             ((uint32_t)0x00040000)
+#define CR_HSEON_Reset            ((uint32_t)0xFFFEFFFF)
+#define CR_HSEON_Set              ((uint32_t)0x00010000)
+#define CR_HSITRIM_Mask           ((uint32_t)0xFFFFFF07)
+
+/* CFGR register bit mask */
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) 
+ #define CFGR_PLL_Mask            ((uint32_t)0xFFC2FFFF)
+#else
+ #define CFGR_PLL_Mask            ((uint32_t)0xFFC0FFFF)
+#endif /* STM32F10X_CL */ 
+
+#define CFGR_PLLMull_Mask         ((uint32_t)0x003C0000)
+#define CFGR_PLLSRC_Mask          ((uint32_t)0x00010000)
+#define CFGR_PLLXTPRE_Mask        ((uint32_t)0x00020000)
+#define CFGR_SWS_Mask             ((uint32_t)0x0000000C)
+#define CFGR_SW_Mask              ((uint32_t)0xFFFFFFFC)
+#define CFGR_HPRE_Reset_Mask      ((uint32_t)0xFFFFFF0F)
+#define CFGR_HPRE_Set_Mask        ((uint32_t)0x000000F0)
+#define CFGR_PPRE1_Reset_Mask     ((uint32_t)0xFFFFF8FF)
+#define CFGR_PPRE1_Set_Mask       ((uint32_t)0x00000700)
+#define CFGR_PPRE2_Reset_Mask     ((uint32_t)0xFFFFC7FF)
+#define CFGR_PPRE2_Set_Mask       ((uint32_t)0x00003800)
+#define CFGR_ADCPRE_Reset_Mask    ((uint32_t)0xFFFF3FFF)
+#define CFGR_ADCPRE_Set_Mask      ((uint32_t)0x0000C000)
+
+/* CSR register bit mask */
+#define CSR_RMVF_Set              ((uint32_t)0x01000000)
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL) 
+/* CFGR2 register bit mask */
+ #define CFGR2_PREDIV1SRC         ((uint32_t)0x00010000)
+ #define CFGR2_PREDIV1            ((uint32_t)0x0000000F)
+#endif
+#ifdef STM32F10X_CL
+ #define CFGR2_PREDIV2            ((uint32_t)0x000000F0)
+ #define CFGR2_PLL2MUL            ((uint32_t)0x00000F00)
+ #define CFGR2_PLL3MUL            ((uint32_t)0x0000F000)
+#endif /* STM32F10X_CL */ 
+
+/* RCC Flag Mask */
+#define FLAG_Mask                 ((uint8_t)0x1F)
+
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define CIR_BYTE2_ADDRESS         ((uint32_t)0x40021009)
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define CIR_BYTE3_ADDRESS         ((uint32_t)0x4002100A)
+
+/* CFGR register byte 4 (Bits[31:24]) base address */
+#define CFGR_BYTE4_ADDRESS        ((uint32_t)0x40021007)
+
+/* BDCR register base address */
+#define BDCR_ADDRESS              (PERIPH_BASE + BDCR_OFFSET)
+
+/**
+  * @}
+  */ 
+
+/** @defgroup RCC_Private_Macros
+  * @{
+  */ 
+
+/**
+  * @}
+  */ 
+
+/** @defgroup RCC_Private_Variables
+  * @{
+  */ 
+
+static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8};
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RCC_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Resets the RCC clock configuration to the default reset state.
+  * @param  None
+  * @retval None
+  */
+void RCC_DeInit(void)
+{
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+  RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+  RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+
+}
+
+/**
+  * @brief  Configures the External High Speed oscillator (HSE).
+  * @note   HSE can not be stopped if it is used directly or through the PLL as system clock.
+  * @param  RCC_HSE: specifies the new state of the HSE.
+  *   This parameter can be one of the following values:
+  *     @arg RCC_HSE_OFF: HSE oscillator OFF
+  *     @arg RCC_HSE_ON: HSE oscillator ON
+  *     @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock
+  * @retval None
+  */
+void RCC_HSEConfig(uint32_t RCC_HSE)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_HSE(RCC_HSE));
+  /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/
+  /* Reset HSEON bit */
+  RCC->CR &= CR_HSEON_Reset;
+  /* Reset HSEBYP bit */
+  RCC->CR &= CR_HSEBYP_Reset;
+  /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */
+  switch(RCC_HSE)
+  {
+    case RCC_HSE_ON:
+      /* Set HSEON bit */
+      RCC->CR |= CR_HSEON_Set;
+      break;
+      
+    case RCC_HSE_Bypass:
+      /* Set HSEBYP and HSEON bits */
+      RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set;
+      break;
+      
+    default:
+      break;
+  }
+}
+
+/**
+  * @brief  Waits for HSE start-up.
+  * @param  None
+  * @retval An ErrorStatus enumuration value:
+  * - SUCCESS: HSE oscillator is stable and ready to use
+  * - ERROR: HSE oscillator not yet ready
+  */
+ErrorStatus RCC_WaitForHSEStartUp(void)
+{
+  __IO uint32_t StartUpCounter = 0;
+  ErrorStatus status = ERROR;
+  FlagStatus HSEStatus = RESET;
+  
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY);
+    StartUpCounter++;  
+  } while((StartUpCounter != HSE_STARTUP_TIMEOUT) && (HSEStatus == RESET));
+  
+  if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET)
+  {
+    status = SUCCESS;
+  }
+  else
+  {
+    status = ERROR;
+  }  
+  return (status);
+}
+
+/**
+  * @brief  Adjusts the Internal High Speed oscillator (HSI) calibration value.
+  * @param  HSICalibrationValue: specifies the calibration trimming value.
+  *   This parameter must be a number between 0 and 0x1F.
+  * @retval None
+  */
+void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue));
+  tmpreg = RCC->CR;
+  /* Clear HSITRIM[4:0] bits */
+  tmpreg &= CR_HSITRIM_Mask;
+  /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */
+  tmpreg |= (uint32_t)HSICalibrationValue << 3;
+  /* Store the new value */
+  RCC->CR = tmpreg;
+}
+
+/**
+  * @brief  Enables or disables the Internal High Speed oscillator (HSI).
+  * @note   HSI can not be stopped if it is used directly or through the PLL as system clock.
+  * @param  NewState: new state of the HSI. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_HSICmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Configures the PLL clock source and multiplication factor.
+  * @note   This function must be used only when the PLL is disabled.
+  * @param  RCC_PLLSource: specifies the PLL entry clock source.
+  *   For @b STM32_Connectivity_line_devices or @b STM32_Value_line_devices, 
+  *   this parameter can be one of the following values:
+  *     @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry
+  *     @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry
+  *   For @b other_STM32_devices, this parameter can be one of the following values:
+  *     @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry
+  *     @arg RCC_PLLSource_HSE_Div1: HSE oscillator clock selected as PLL clock entry
+  *     @arg RCC_PLLSource_HSE_Div2: HSE oscillator clock divided by 2 selected as PLL clock entry 
+  * @param  RCC_PLLMul: specifies the PLL multiplication factor.
+  *   For @b STM32_Connectivity_line_devices, this parameter can be RCC_PLLMul_x where x:{[4,9], 6_5}
+  *   For @b other_STM32_devices, this parameter can be RCC_PLLMul_x where x:[2,16]  
+  * @retval None
+  */
+void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource));
+  assert_param(IS_RCC_PLL_MUL(RCC_PLLMul));
+
+  tmpreg = RCC->CFGR;
+  /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */
+  tmpreg &= CFGR_PLL_Mask;
+  /* Set the PLL configuration bits */
+  tmpreg |= RCC_PLLSource | RCC_PLLMul;
+  /* Store the new value */
+  RCC->CFGR = tmpreg;
+}
+
+/**
+  * @brief  Enables or disables the PLL.
+  * @note   The PLL can not be disabled if it is used as system clock.
+  * @param  NewState: new state of the PLL. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_PLLCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState;
+}
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) || defined (STM32F10X_CL)
+/**
+  * @brief  Configures the PREDIV1 division factor.
+  * @note 
+  *   - This function must be used only when the PLL is disabled.
+  *   - This function applies only to STM32 Connectivity line and Value line 
+  *     devices.
+  * @param  RCC_PREDIV1_Source: specifies the PREDIV1 clock source.
+  *   This parameter can be one of the following values:
+  *     @arg RCC_PREDIV1_Source_HSE: HSE selected as PREDIV1 clock
+  *     @arg RCC_PREDIV1_Source_PLL2: PLL2 selected as PREDIV1 clock
+  * @note 
+  *   For @b STM32_Value_line_devices this parameter is always RCC_PREDIV1_Source_HSE  
+  * @param  RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor.
+  *   This parameter can be RCC_PREDIV1_Divx where x:[1,16]
+  * @retval None
+  */
+void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_RCC_PREDIV1_SOURCE(RCC_PREDIV1_Source));
+  assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div));
+
+  tmpreg = RCC->CFGR2;
+  /* Clear PREDIV1[3:0] and PREDIV1SRC bits */
+  tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC);
+  /* Set the PREDIV1 clock source and division factor */
+  tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div ;
+  /* Store the new value */
+  RCC->CFGR2 = tmpreg;
+}
+#endif
+
+#ifdef STM32F10X_CL
+/**
+  * @brief  Configures the PREDIV2 division factor.
+  * @note 
+  *   - This function must be used only when both PLL2 and PLL3 are disabled.
+  *   - This function applies only to STM32 Connectivity line devices.
+  * @param  RCC_PREDIV2_Div: specifies the PREDIV2 clock division factor.
+  *   This parameter can be RCC_PREDIV2_Divx where x:[1,16]
+  * @retval None
+  */
+void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_PREDIV2(RCC_PREDIV2_Div));
+
+  tmpreg = RCC->CFGR2;
+  /* Clear PREDIV2[3:0] bits */
+  tmpreg &= ~CFGR2_PREDIV2;
+  /* Set the PREDIV2 division factor */
+  tmpreg |= RCC_PREDIV2_Div;
+  /* Store the new value */
+  RCC->CFGR2 = tmpreg;
+}
+
+/**
+  * @brief  Configures the PLL2 multiplication factor.
+  * @note
+  *   - This function must be used only when the PLL2 is disabled.
+  *   - This function applies only to STM32 Connectivity line devices.
+  * @param  RCC_PLL2Mul: specifies the PLL2 multiplication factor.
+  *   This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20}
+  * @retval None
+  */
+void RCC_PLL2Config(uint32_t RCC_PLL2Mul)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_PLL2_MUL(RCC_PLL2Mul));
+
+  tmpreg = RCC->CFGR2;
+  /* Clear PLL2Mul[3:0] bits */
+  tmpreg &= ~CFGR2_PLL2MUL;
+  /* Set the PLL2 configuration bits */
+  tmpreg |= RCC_PLL2Mul;
+  /* Store the new value */
+  RCC->CFGR2 = tmpreg;
+}
+
+
+/**
+  * @brief  Enables or disables the PLL2.
+  * @note 
+  *   - The PLL2 can not be disabled if it is used indirectly as system clock
+  *     (i.e. it is used as PLL clock entry that is used as System clock).
+  *   - This function applies only to STM32 Connectivity line devices.
+  * @param  NewState: new state of the PLL2. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_PLL2Cmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  *(__IO uint32_t *) CR_PLL2ON_BB = (uint32_t)NewState;
+}
+
+
+/**
+  * @brief  Configures the PLL3 multiplication factor.
+  * @note 
+  *   - This function must be used only when the PLL3 is disabled.
+  *   - This function applies only to STM32 Connectivity line devices.
+  * @param  RCC_PLL3Mul: specifies the PLL3 multiplication factor.
+  *   This parameter can be RCC_PLL3Mul_x where x:{[8,14], 16, 20}
+  * @retval None
+  */
+void RCC_PLL3Config(uint32_t RCC_PLL3Mul)
+{
+  uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_RCC_PLL3_MUL(RCC_PLL3Mul));
+
+  tmpreg = RCC->CFGR2;
+  /* Clear PLL3Mul[3:0] bits */
+  tmpreg &= ~CFGR2_PLL3MUL;
+  /* Set the PLL3 configuration bits */
+  tmpreg |= RCC_PLL3Mul;
+  /* Store the new value */
+  RCC->CFGR2 = tmpreg;
+}
+
+
+/**
+  * @brief  Enables or disables the PLL3.
+  * @note   This function applies only to STM32 Connectivity line devices.
+  * @param  NewState: new state of the PLL3. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_PLL3Cmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  *(__IO uint32_t *) CR_PLL3ON_BB = (uint32_t)NewState;
+}
+#endif /* STM32F10X_CL */
+
+/**
+  * @brief  Configures the system clock (SYSCLK).
+  * @param  RCC_SYSCLKSource: specifies the clock source used as system clock.
+  *   This parameter can be one of the following values:
+  *     @arg RCC_SYSCLKSource_HSI: HSI selected as system clock
+  *     @arg RCC_SYSCLKSource_HSE: HSE selected as system clock
+  *     @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock
+  * @retval None
+  */
+void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource));
+  tmpreg = RCC->CFGR;
+  /* Clear SW[1:0] bits */
+  tmpreg &= CFGR_SW_Mask;
+  /* Set SW[1:0] bits according to RCC_SYSCLKSource value */
+  tmpreg |= RCC_SYSCLKSource;
+  /* Store the new value */
+  RCC->CFGR = tmpreg;
+}
+
+/**
+  * @brief  Returns the clock source used as system clock.
+  * @param  None
+  * @retval The clock source used as system clock. The returned value can
+  *   be one of the following:
+  *     - 0x00: HSI used as system clock
+  *     - 0x04: HSE used as system clock
+  *     - 0x08: PLL used as system clock
+  */
+uint8_t RCC_GetSYSCLKSource(void)
+{
+  return ((uint8_t)(RCC->CFGR & CFGR_SWS_Mask));
+}
+
+/**
+  * @brief  Configures the AHB clock (HCLK).
+  * @param  RCC_SYSCLK: defines the AHB clock divider. This clock is derived from 
+  *   the system clock (SYSCLK).
+  *   This parameter can be one of the following values:
+  *     @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK
+  *     @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2
+  *     @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4
+  *     @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8
+  *     @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16
+  *     @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64
+  *     @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128
+  *     @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256
+  *     @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512
+  * @retval None
+  */
+void RCC_HCLKConfig(uint32_t RCC_SYSCLK)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_RCC_HCLK(RCC_SYSCLK));
+  tmpreg = RCC->CFGR;
+  /* Clear HPRE[3:0] bits */
+  tmpreg &= CFGR_HPRE_Reset_Mask;
+  /* Set HPRE[3:0] bits according to RCC_SYSCLK value */
+  tmpreg |= RCC_SYSCLK;
+  /* Store the new value */
+  RCC->CFGR = tmpreg;
+}
+
+/**
+  * @brief  Configures the Low Speed APB clock (PCLK1).
+  * @param  RCC_HCLK: defines the APB1 clock divider. This clock is derived from 
+  *   the AHB clock (HCLK).
+  *   This parameter can be one of the following values:
+  *     @arg RCC_HCLK_Div1: APB1 clock = HCLK
+  *     @arg RCC_HCLK_Div2: APB1 clock = HCLK/2
+  *     @arg RCC_HCLK_Div4: APB1 clock = HCLK/4
+  *     @arg RCC_HCLK_Div8: APB1 clock = HCLK/8
+  *     @arg RCC_HCLK_Div16: APB1 clock = HCLK/16
+  * @retval None
+  */
+void RCC_PCLK1Config(uint32_t RCC_HCLK)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_RCC_PCLK(RCC_HCLK));
+  tmpreg = RCC->CFGR;
+  /* Clear PPRE1[2:0] bits */
+  tmpreg &= CFGR_PPRE1_Reset_Mask;
+  /* Set PPRE1[2:0] bits according to RCC_HCLK value */
+  tmpreg |= RCC_HCLK;
+  /* Store the new value */
+  RCC->CFGR = tmpreg;
+}
+
+/**
+  * @brief  Configures the High Speed APB clock (PCLK2).
+  * @param  RCC_HCLK: defines the APB2 clock divider. This clock is derived from 
+  *   the AHB clock (HCLK).
+  *   This parameter can be one of the following values:
+  *     @arg RCC_HCLK_Div1: APB2 clock = HCLK
+  *     @arg RCC_HCLK_Div2: APB2 clock = HCLK/2
+  *     @arg RCC_HCLK_Div4: APB2 clock = HCLK/4
+  *     @arg RCC_HCLK_Div8: APB2 clock = HCLK/8
+  *     @arg RCC_HCLK_Div16: APB2 clock = HCLK/16
+  * @retval None
+  */
+void RCC_PCLK2Config(uint32_t RCC_HCLK)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_RCC_PCLK(RCC_HCLK));
+  tmpreg = RCC->CFGR;
+  /* Clear PPRE2[2:0] bits */
+  tmpreg &= CFGR_PPRE2_Reset_Mask;
+  /* Set PPRE2[2:0] bits according to RCC_HCLK value */
+  tmpreg |= RCC_HCLK << 3;
+  /* Store the new value */
+  RCC->CFGR = tmpreg;
+}
+
+/**
+  * @brief  Enables or disables the specified RCC interrupts.
+  * @param  RCC_IT: specifies the RCC interrupt sources to be enabled or disabled.
+  * 
+  *   For @b STM32_Connectivity_line_devices, this parameter can be any combination
+  *   of the following values        
+  *     @arg RCC_IT_LSIRDY: LSI ready interrupt
+  *     @arg RCC_IT_LSERDY: LSE ready interrupt
+  *     @arg RCC_IT_HSIRDY: HSI ready interrupt
+  *     @arg RCC_IT_HSERDY: HSE ready interrupt
+  *     @arg RCC_IT_PLLRDY: PLL ready interrupt
+  *     @arg RCC_IT_PLL2RDY: PLL2 ready interrupt
+  *     @arg RCC_IT_PLL3RDY: PLL3 ready interrupt
+  * 
+  *   For @b other_STM32_devices, this parameter can be any combination of the 
+  *   following values        
+  *     @arg RCC_IT_LSIRDY: LSI ready interrupt
+  *     @arg RCC_IT_LSERDY: LSE ready interrupt
+  *     @arg RCC_IT_HSIRDY: HSI ready interrupt
+  *     @arg RCC_IT_HSERDY: HSE ready interrupt
+  *     @arg RCC_IT_PLLRDY: PLL ready interrupt
+  *       
+  * @param  NewState: new state of the specified RCC interrupts.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_IT(RCC_IT));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Perform Byte access to RCC_CIR bits to enable the selected interrupts */
+    *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT;
+  }
+  else
+  {
+    /* Perform Byte access to RCC_CIR bits to disable the selected interrupts */
+    *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT;
+  }
+}
+
+#ifndef STM32F10X_CL
+/**
+  * @brief  Configures the USB clock (USBCLK).
+  * @param  RCC_USBCLKSource: specifies the USB clock source. This clock is 
+  *   derived from the PLL output.
+  *   This parameter can be one of the following values:
+  *     @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB 
+  *                                     clock source
+  *     @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source
+  * @retval None
+  */
+void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource));
+
+  *(__IO uint32_t *) CFGR_USBPRE_BB = RCC_USBCLKSource;
+}
+#else
+/**
+  * @brief  Configures the USB OTG FS clock (OTGFSCLK).
+  *   This function applies only to STM32 Connectivity line devices.
+  * @param  RCC_OTGFSCLKSource: specifies the USB OTG FS clock source.
+  *   This clock is derived from the PLL output.
+  *   This parameter can be one of the following values:
+  *     @arg  RCC_OTGFSCLKSource_PLLVCO_Div3: PLL VCO clock divided by 2 selected as USB OTG FS clock source
+  *     @arg  RCC_OTGFSCLKSource_PLLVCO_Div2: PLL VCO clock divided by 2 selected as USB OTG FS clock source
+  * @retval None
+  */
+void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_OTGFSCLK_SOURCE(RCC_OTGFSCLKSource));
+
+  *(__IO uint32_t *) CFGR_OTGFSPRE_BB = RCC_OTGFSCLKSource;
+}
+#endif /* STM32F10X_CL */ 
+
+/**
+  * @brief  Configures the ADC clock (ADCCLK).
+  * @param  RCC_PCLK2: defines the ADC clock divider. This clock is derived from 
+  *   the APB2 clock (PCLK2).
+  *   This parameter can be one of the following values:
+  *     @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2
+  *     @arg RCC_PCLK2_Div4: ADC clock = PCLK2/4
+  *     @arg RCC_PCLK2_Div6: ADC clock = PCLK2/6
+  *     @arg RCC_PCLK2_Div8: ADC clock = PCLK2/8
+  * @retval None
+  */
+void RCC_ADCCLKConfig(uint32_t RCC_PCLK2)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_RCC_ADCCLK(RCC_PCLK2));
+  tmpreg = RCC->CFGR;
+  /* Clear ADCPRE[1:0] bits */
+  tmpreg &= CFGR_ADCPRE_Reset_Mask;
+  /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */
+  tmpreg |= RCC_PCLK2;
+  /* Store the new value */
+  RCC->CFGR = tmpreg;
+}
+
+#ifdef STM32F10X_CL
+/**
+  * @brief  Configures the I2S2 clock source(I2S2CLK).
+  * @note
+  *   - This function must be called before enabling I2S2 APB clock.
+  *   - This function applies only to STM32 Connectivity line devices.
+  * @param  RCC_I2S2CLKSource: specifies the I2S2 clock source.
+  *   This parameter can be one of the following values:
+  *     @arg RCC_I2S2CLKSource_SYSCLK: system clock selected as I2S2 clock entry
+  *     @arg RCC_I2S2CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S2 clock entry
+  * @retval None
+  */
+void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_I2S2CLK_SOURCE(RCC_I2S2CLKSource));
+
+  *(__IO uint32_t *) CFGR2_I2S2SRC_BB = RCC_I2S2CLKSource;
+}
+
+/**
+  * @brief  Configures the I2S3 clock source(I2S2CLK).
+  * @note
+  *   - This function must be called before enabling I2S3 APB clock.
+  *   - This function applies only to STM32 Connectivity line devices.
+  * @param  RCC_I2S3CLKSource: specifies the I2S3 clock source.
+  *   This parameter can be one of the following values:
+  *     @arg RCC_I2S3CLKSource_SYSCLK: system clock selected as I2S3 clock entry
+  *     @arg RCC_I2S3CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S3 clock entry
+  * @retval None
+  */
+void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_I2S3CLK_SOURCE(RCC_I2S3CLKSource));
+
+  *(__IO uint32_t *) CFGR2_I2S3SRC_BB = RCC_I2S3CLKSource;
+}
+#endif /* STM32F10X_CL */
+
+/**
+  * @brief  Configures the External Low Speed oscillator (LSE).
+  * @param  RCC_LSE: specifies the new state of the LSE.
+  *   This parameter can be one of the following values:
+  *     @arg RCC_LSE_OFF: LSE oscillator OFF
+  *     @arg RCC_LSE_ON: LSE oscillator ON
+  *     @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock
+  * @retval None
+  */
+void RCC_LSEConfig(uint8_t RCC_LSE)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_LSE(RCC_LSE));
+  /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/
+  /* Reset LSEON bit */
+  *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF;
+  /* Reset LSEBYP bit */
+  *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF;
+  /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */
+  switch(RCC_LSE)
+  {
+    case RCC_LSE_ON:
+      /* Set LSEON bit */
+      *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON;
+      break;
+      
+    case RCC_LSE_Bypass:
+      /* Set LSEBYP and LSEON bits */
+      *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON;
+      break;            
+      
+    default:
+      break;      
+  }
+}
+
+/**
+  * @brief  Enables or disables the Internal Low Speed oscillator (LSI).
+  * @note   LSI can not be disabled if the IWDG is running.
+  * @param  NewState: new state of the LSI. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_LSICmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Configures the RTC clock (RTCCLK).
+  * @note   Once the RTC clock is selected it can't be changed unless the Backup domain is reset.
+  * @param  RCC_RTCCLKSource: specifies the RTC clock source.
+  *   This parameter can be one of the following values:
+  *     @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock
+  *     @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock
+  *     @arg RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 selected as RTC clock
+  * @retval None
+  */
+void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource));
+  /* Select the RTC clock source */
+  RCC->BDCR |= RCC_RTCCLKSource;
+}
+
+/**
+  * @brief  Enables or disables the RTC clock.
+  * @note   This function must be used only after the RTC clock was selected using the RCC_RTCCLKConfig function.
+  * @param  NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_RTCCLKCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Returns the frequencies of different on chip clocks.
+  * @param  RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold
+  *         the clocks frequencies.
+  * @note   The result of this function could be not correct when using 
+  *         fractional value for HSE crystal.  
+  * @retval None
+  */
+void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks)
+{
+  uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0;
+
+#ifdef  STM32F10X_CL
+  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+  uint32_t prediv1factor = 0;
+#endif
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & CFGR_SWS_Mask;
+  
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock */
+      RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock */
+      RCC_Clocks->SYSCLK_Frequency = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & CFGR_PLLMull_Mask;
+      pllsource = RCC->CFGR & CFGR_PLLSRC_Mask;
+      
+#ifndef STM32F10X_CL      
+      pllmull = ( pllmull >> 18) + 2;
+      
+      if (pllsource == 0x00)
+      {/* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+       prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE >> 1) * pllmull;
+        }
+        else
+        {
+          RCC_Clocks->SYSCLK_Frequency = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18;
+      
+      if (pllmull != 0x0D)
+      {
+         pllmull += 2;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13 / 2; 
+      }
+            
+      if (pllsource == 0x00)
+      {/* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        RCC_Clocks->SYSCLK_Frequency = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1;
+        
+        if (prediv1source == 0)
+        { /* HSE oscillator clock selected as PREDIV1 clock entry */
+          RCC_Clocks->SYSCLK_Frequency = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & CFGR2_PREDIV2) >> 4) + 1;
+          pll2mull = ((RCC->CFGR2 & CFGR2_PLL2MUL) >> 8 ) + 2; 
+          RCC_Clocks->SYSCLK_Frequency = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F10X_CL */ 
+      break;
+
+    default:
+      RCC_Clocks->SYSCLK_Frequency = HSI_VALUE;
+      break;
+  }
+
+  /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/
+  /* Get HCLK prescaler */
+  tmp = RCC->CFGR & CFGR_HPRE_Set_Mask;
+  tmp = tmp >> 4;
+  presc = APBAHBPrescTable[tmp];
+  /* HCLK clock frequency */
+  RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc;
+  /* Get PCLK1 prescaler */
+  tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask;
+  tmp = tmp >> 8;
+  presc = APBAHBPrescTable[tmp];
+  /* PCLK1 clock frequency */
+  RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
+  /* Get PCLK2 prescaler */
+  tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask;
+  tmp = tmp >> 11;
+  presc = APBAHBPrescTable[tmp];
+  /* PCLK2 clock frequency */
+  RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc;
+  /* Get ADCCLK prescaler */
+  tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask;
+  tmp = tmp >> 14;
+  presc = ADCPrescTable[tmp];
+  /* ADCCLK clock frequency */
+  RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc;
+}
+
+/**
+  * @brief  Enables or disables the AHB peripheral clock.
+  * @param  RCC_AHBPeriph: specifies the AHB peripheral to gates its clock.
+  *   
+  *   For @b STM32_Connectivity_line_devices, this parameter can be any combination
+  *   of the following values:        
+  *     @arg RCC_AHBPeriph_DMA1
+  *     @arg RCC_AHBPeriph_DMA2
+  *     @arg RCC_AHBPeriph_SRAM
+  *     @arg RCC_AHBPeriph_FLITF
+  *     @arg RCC_AHBPeriph_CRC
+  *     @arg RCC_AHBPeriph_OTG_FS    
+  *     @arg RCC_AHBPeriph_ETH_MAC   
+  *     @arg RCC_AHBPeriph_ETH_MAC_Tx
+  *     @arg RCC_AHBPeriph_ETH_MAC_Rx
+  * 
+  *   For @b other_STM32_devices, this parameter can be any combination of the 
+  *   following values:        
+  *     @arg RCC_AHBPeriph_DMA1
+  *     @arg RCC_AHBPeriph_DMA2
+  *     @arg RCC_AHBPeriph_SRAM
+  *     @arg RCC_AHBPeriph_FLITF
+  *     @arg RCC_AHBPeriph_CRC
+  *     @arg RCC_AHBPeriph_FSMC
+  *     @arg RCC_AHBPeriph_SDIO
+  *   
+  * @note SRAM and FLITF clock can be disabled only during sleep mode.
+  * @param  NewState: new state of the specified peripheral clock.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  if (NewState != DISABLE)
+  {
+    RCC->AHBENR |= RCC_AHBPeriph;
+  }
+  else
+  {
+    RCC->AHBENR &= ~RCC_AHBPeriph;
+  }
+}
+
+/**
+  * @brief  Enables or disables the High Speed APB (APB2) peripheral clock.
+  * @param  RCC_APB2Periph: specifies the APB2 peripheral to gates its clock.
+  *   This parameter can be any combination of the following values:
+  *     @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB,
+  *          RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE,
+  *          RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1,
+  *          RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1,
+  *          RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3,
+  *          RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17,
+  *          RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11     
+  * @param  NewState: new state of the specified peripheral clock.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    RCC->APB2ENR |= RCC_APB2Periph;
+  }
+  else
+  {
+    RCC->APB2ENR &= ~RCC_APB2Periph;
+  }
+}
+
+/**
+  * @brief  Enables or disables the Low Speed APB (APB1) peripheral clock.
+  * @param  RCC_APB1Periph: specifies the APB1 peripheral to gates its clock.
+  *   This parameter can be any combination of the following values:
+  *     @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
+  *          RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
+  *          RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
+  *          RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, 
+  *          RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
+  *          RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP,
+  *          RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC,
+  *          RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14
+  * @param  NewState: new state of the specified peripheral clock.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    RCC->APB1ENR |= RCC_APB1Periph;
+  }
+  else
+  {
+    RCC->APB1ENR &= ~RCC_APB1Periph;
+  }
+}
+
+#ifdef STM32F10X_CL
+/**
+  * @brief  Forces or releases AHB peripheral reset.
+  * @note   This function applies only to STM32 Connectivity line devices.
+  * @param  RCC_AHBPeriph: specifies the AHB peripheral to reset.
+  *   This parameter can be any combination of the following values:
+  *     @arg RCC_AHBPeriph_OTG_FS 
+  *     @arg RCC_AHBPeriph_ETH_MAC
+  * @param  NewState: new state of the specified peripheral reset.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_AHB_PERIPH_RESET(RCC_AHBPeriph));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  if (NewState != DISABLE)
+  {
+    RCC->AHBRSTR |= RCC_AHBPeriph;
+  }
+  else
+  {
+    RCC->AHBRSTR &= ~RCC_AHBPeriph;
+  }
+}
+#endif /* STM32F10X_CL */ 
+
+/**
+  * @brief  Forces or releases High Speed APB (APB2) peripheral reset.
+  * @param  RCC_APB2Periph: specifies the APB2 peripheral to reset.
+  *   This parameter can be any combination of the following values:
+  *     @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB,
+  *          RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE,
+  *          RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1,
+  *          RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1,
+  *          RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3,
+  *          RCC_APB2Periph_TIM15, RCC_APB2Periph_TIM16, RCC_APB2Periph_TIM17,
+  *          RCC_APB2Periph_TIM9, RCC_APB2Periph_TIM10, RCC_APB2Periph_TIM11  
+  * @param  NewState: new state of the specified peripheral reset.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    RCC->APB2RSTR |= RCC_APB2Periph;
+  }
+  else
+  {
+    RCC->APB2RSTR &= ~RCC_APB2Periph;
+  }
+}
+
+/**
+  * @brief  Forces or releases Low Speed APB (APB1) peripheral reset.
+  * @param  RCC_APB1Periph: specifies the APB1 peripheral to reset.
+  *   This parameter can be any combination of the following values:
+  *     @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4,
+  *          RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7,
+  *          RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3,
+  *          RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, 
+  *          RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2,
+  *          RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP,
+  *          RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_CEC,
+  *          RCC_APB1Periph_TIM12, RCC_APB1Periph_TIM13, RCC_APB1Periph_TIM14  
+  * @param  NewState: new state of the specified peripheral clock.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    RCC->APB1RSTR |= RCC_APB1Periph;
+  }
+  else
+  {
+    RCC->APB1RSTR &= ~RCC_APB1Periph;
+  }
+}
+
+/**
+  * @brief  Forces or releases the Backup domain reset.
+  * @param  NewState: new state of the Backup domain reset.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_BackupResetCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Enables or disables the Clock Security System.
+  * @param  NewState: new state of the Clock Security System..
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RCC_ClockSecuritySystemCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Selects the clock source to output on MCO pin.
+  * @param  RCC_MCO: specifies the clock source to output.
+  *   
+  *   For @b STM32_Connectivity_line_devices, this parameter can be one of the
+  *   following values:       
+  *     @arg RCC_MCO_NoClock: No clock selected
+  *     @arg RCC_MCO_SYSCLK: System clock selected
+  *     @arg RCC_MCO_HSI: HSI oscillator clock selected
+  *     @arg RCC_MCO_HSE: HSE oscillator clock selected
+  *     @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected
+  *     @arg RCC_MCO_PLL2CLK: PLL2 clock selected                     
+  *     @arg RCC_MCO_PLL3CLK_Div2: PLL3 clock divided by 2 selected   
+  *     @arg RCC_MCO_XT1: External 3-25 MHz oscillator clock selected  
+  *     @arg RCC_MCO_PLL3CLK: PLL3 clock selected 
+  * 
+  *   For  @b other_STM32_devices, this parameter can be one of the following values:        
+  *     @arg RCC_MCO_NoClock: No clock selected
+  *     @arg RCC_MCO_SYSCLK: System clock selected
+  *     @arg RCC_MCO_HSI: HSI oscillator clock selected
+  *     @arg RCC_MCO_HSE: HSE oscillator clock selected
+  *     @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected
+  *   
+  * @retval None
+  */
+void RCC_MCOConfig(uint8_t RCC_MCO)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_MCO(RCC_MCO));
+
+  /* Perform Byte access to MCO bits to select the MCO source */
+  *(__IO uint8_t *) CFGR_BYTE4_ADDRESS = RCC_MCO;
+}
+
+/**
+  * @brief  Checks whether the specified RCC flag is set or not.
+  * @param  RCC_FLAG: specifies the flag to check.
+  *   
+  *   For @b STM32_Connectivity_line_devices, this parameter can be one of the
+  *   following values:
+  *     @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+  *     @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+  *     @arg RCC_FLAG_PLLRDY: PLL clock ready
+  *     @arg RCC_FLAG_PLL2RDY: PLL2 clock ready      
+  *     @arg RCC_FLAG_PLL3RDY: PLL3 clock ready                           
+  *     @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+  *     @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+  *     @arg RCC_FLAG_PINRST: Pin reset
+  *     @arg RCC_FLAG_PORRST: POR/PDR reset
+  *     @arg RCC_FLAG_SFTRST: Software reset
+  *     @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+  *     @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+  *     @arg RCC_FLAG_LPWRRST: Low Power reset
+  * 
+  *   For @b other_STM32_devices, this parameter can be one of the following values:        
+  *     @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+  *     @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+  *     @arg RCC_FLAG_PLLRDY: PLL clock ready
+  *     @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+  *     @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+  *     @arg RCC_FLAG_PINRST: Pin reset
+  *     @arg RCC_FLAG_PORRST: POR/PDR reset
+  *     @arg RCC_FLAG_SFTRST: Software reset
+  *     @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+  *     @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+  *     @arg RCC_FLAG_LPWRRST: Low Power reset
+  *   
+  * @retval The new state of RCC_FLAG (SET or RESET).
+  */
+FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG)
+{
+  uint32_t tmp = 0;
+  uint32_t statusreg = 0;
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_RCC_FLAG(RCC_FLAG));
+
+  /* Get the RCC register index */
+  tmp = RCC_FLAG >> 5;
+  if (tmp == 1)               /* The flag to check is in CR register */
+  {
+    statusreg = RCC->CR;
+  }
+  else if (tmp == 2)          /* The flag to check is in BDCR register */
+  {
+    statusreg = RCC->BDCR;
+  }
+  else                       /* The flag to check is in CSR register */
+  {
+    statusreg = RCC->CSR;
+  }
+
+  /* Get the flag position */
+  tmp = RCC_FLAG & FLAG_Mask;
+  if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+
+  /* Return the flag status */
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the RCC reset flags.
+  * @note   The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+  *   RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+  * @param  None
+  * @retval None
+  */
+void RCC_ClearFlag(void)
+{
+  /* Set RMVF bit to clear the reset flags */
+  RCC->CSR |= CSR_RMVF_Set;
+}
+
+/**
+  * @brief  Checks whether the specified RCC interrupt has occurred or not.
+  * @param  RCC_IT: specifies the RCC interrupt source to check.
+  *   
+  *   For @b STM32_Connectivity_line_devices, this parameter can be one of the
+  *   following values:
+  *     @arg RCC_IT_LSIRDY: LSI ready interrupt
+  *     @arg RCC_IT_LSERDY: LSE ready interrupt
+  *     @arg RCC_IT_HSIRDY: HSI ready interrupt
+  *     @arg RCC_IT_HSERDY: HSE ready interrupt
+  *     @arg RCC_IT_PLLRDY: PLL ready interrupt
+  *     @arg RCC_IT_PLL2RDY: PLL2 ready interrupt 
+  *     @arg RCC_IT_PLL3RDY: PLL3 ready interrupt                      
+  *     @arg RCC_IT_CSS: Clock Security System interrupt
+  * 
+  *   For @b other_STM32_devices, this parameter can be one of the following values:        
+  *     @arg RCC_IT_LSIRDY: LSI ready interrupt
+  *     @arg RCC_IT_LSERDY: LSE ready interrupt
+  *     @arg RCC_IT_HSIRDY: HSI ready interrupt
+  *     @arg RCC_IT_HSERDY: HSE ready interrupt
+  *     @arg RCC_IT_PLLRDY: PLL ready interrupt
+  *     @arg RCC_IT_CSS: Clock Security System interrupt
+  *   
+  * @retval The new state of RCC_IT (SET or RESET).
+  */
+ITStatus RCC_GetITStatus(uint8_t RCC_IT)
+{
+  ITStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_RCC_GET_IT(RCC_IT));
+
+  /* Check the status of the specified RCC interrupt */
+  if ((RCC->CIR & RCC_IT) != (uint32_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+
+  /* Return the RCC_IT status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the RCC's interrupt pending bits.
+  * @param  RCC_IT: specifies the interrupt pending bit to clear.
+  *   
+  *   For @b STM32_Connectivity_line_devices, this parameter can be any combination
+  *   of the following values:
+  *     @arg RCC_IT_LSIRDY: LSI ready interrupt
+  *     @arg RCC_IT_LSERDY: LSE ready interrupt
+  *     @arg RCC_IT_HSIRDY: HSI ready interrupt
+  *     @arg RCC_IT_HSERDY: HSE ready interrupt
+  *     @arg RCC_IT_PLLRDY: PLL ready interrupt
+  *     @arg RCC_IT_PLL2RDY: PLL2 ready interrupt 
+  *     @arg RCC_IT_PLL3RDY: PLL3 ready interrupt                      
+  *     @arg RCC_IT_CSS: Clock Security System interrupt
+  * 
+  *   For @b other_STM32_devices, this parameter can be any combination of the
+  *   following values:        
+  *     @arg RCC_IT_LSIRDY: LSI ready interrupt
+  *     @arg RCC_IT_LSERDY: LSE ready interrupt
+  *     @arg RCC_IT_HSIRDY: HSI ready interrupt
+  *     @arg RCC_IT_HSERDY: HSE ready interrupt
+  *     @arg RCC_IT_PLLRDY: PLL ready interrupt
+  *   
+  *     @arg RCC_IT_CSS: Clock Security System interrupt
+  * @retval None
+  */
+void RCC_ClearITPendingBit(uint8_t RCC_IT)
+{
+  /* Check the parameters */
+  assert_param(IS_RCC_CLEAR_IT(RCC_IT));
+
+  /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt
+     pending bits */
+  *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_rtc.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_rtc.c
new file mode 100644
index 0000000000000000000000000000000000000000..f798d2bd6f2bd8cc282142dc0b66a466c4669a0f
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_rtc.c
@@ -0,0 +1,339 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_rtc.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the RTC firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_rtc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup RTC 
+  * @brief RTC driver modules
+  * @{
+  */
+
+/** @defgroup RTC_Private_TypesDefinitions
+  * @{
+  */ 
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Private_Defines
+  * @{
+  */
+#define RTC_LSB_MASK     ((uint32_t)0x0000FFFF)  /*!< RTC LSB Mask */
+#define PRLH_MSB_MASK    ((uint32_t)0x000F0000)  /*!< RTC Prescaler MSB Mask */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup RTC_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Enables or disables the specified RTC interrupts.
+  * @param  RTC_IT: specifies the RTC interrupts sources to be enabled or disabled.
+  *   This parameter can be any combination of the following values:
+  *     @arg RTC_IT_OW: Overflow interrupt
+  *     @arg RTC_IT_ALR: Alarm interrupt
+  *     @arg RTC_IT_SEC: Second interrupt
+  * @param  NewState: new state of the specified RTC interrupts.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_RTC_IT(RTC_IT));  
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    RTC->CRH |= RTC_IT;
+  }
+  else
+  {
+    RTC->CRH &= (uint16_t)~RTC_IT;
+  }
+}
+
+/**
+  * @brief  Enters the RTC configuration mode.
+  * @param  None
+  * @retval None
+  */
+void RTC_EnterConfigMode(void)
+{
+  /* Set the CNF flag to enter in the Configuration Mode */
+  RTC->CRL |= RTC_CRL_CNF;
+}
+
+/**
+  * @brief  Exits from the RTC configuration mode.
+  * @param  None
+  * @retval None
+  */
+void RTC_ExitConfigMode(void)
+{
+  /* Reset the CNF flag to exit from the Configuration Mode */
+  RTC->CRL &= (uint16_t)~((uint16_t)RTC_CRL_CNF); 
+}
+
+/**
+  * @brief  Gets the RTC counter value.
+  * @param  None
+  * @retval RTC counter value.
+  */
+uint32_t RTC_GetCounter(void)
+{
+  uint16_t tmp = 0;
+  tmp = RTC->CNTL;
+  return (((uint32_t)RTC->CNTH << 16 ) | tmp) ;
+}
+
+/**
+  * @brief  Sets the RTC counter value.
+  * @param  CounterValue: RTC counter new value.
+  * @retval None
+  */
+void RTC_SetCounter(uint32_t CounterValue)
+{ 
+  RTC_EnterConfigMode();
+  /* Set RTC COUNTER MSB word */
+  RTC->CNTH = CounterValue >> 16;
+  /* Set RTC COUNTER LSB word */
+  RTC->CNTL = (CounterValue & RTC_LSB_MASK);
+  RTC_ExitConfigMode();
+}
+
+/**
+  * @brief  Sets the RTC prescaler value.
+  * @param  PrescalerValue: RTC prescaler new value.
+  * @retval None
+  */
+void RTC_SetPrescaler(uint32_t PrescalerValue)
+{
+  /* Check the parameters */
+  assert_param(IS_RTC_PRESCALER(PrescalerValue));
+  
+  RTC_EnterConfigMode();
+  /* Set RTC PRESCALER MSB word */
+  RTC->PRLH = (PrescalerValue & PRLH_MSB_MASK) >> 16;
+  /* Set RTC PRESCALER LSB word */
+  RTC->PRLL = (PrescalerValue & RTC_LSB_MASK);
+  RTC_ExitConfigMode();
+}
+
+/**
+  * @brief  Sets the RTC alarm value.
+  * @param  AlarmValue: RTC alarm new value.
+  * @retval None
+  */
+void RTC_SetAlarm(uint32_t AlarmValue)
+{  
+  RTC_EnterConfigMode();
+  /* Set the ALARM MSB word */
+  RTC->ALRH = AlarmValue >> 16;
+  /* Set the ALARM LSB word */
+  RTC->ALRL = (AlarmValue & RTC_LSB_MASK);
+  RTC_ExitConfigMode();
+}
+
+/**
+  * @brief  Gets the RTC divider value.
+  * @param  None
+  * @retval RTC Divider value.
+  */
+uint32_t RTC_GetDivider(void)
+{
+  uint32_t tmp = 0x00;
+  tmp = ((uint32_t)RTC->DIVH & (uint32_t)0x000F) << 16;
+  tmp |= RTC->DIVL;
+  return tmp;
+}
+
+/**
+  * @brief  Waits until last write operation on RTC registers has finished.
+  * @note   This function must be called before any write to RTC registers.
+  * @param  None
+  * @retval None
+  */
+void RTC_WaitForLastTask(void)
+{
+  /* Loop until RTOFF flag is set */
+  while ((RTC->CRL & RTC_FLAG_RTOFF) == (uint16_t)RESET)
+  {
+  }
+}
+
+/**
+  * @brief  Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL)
+  *   are synchronized with RTC APB clock.
+  * @note   This function must be called before any read operation after an APB reset
+  *   or an APB clock stop.
+  * @param  None
+  * @retval None
+  */
+void RTC_WaitForSynchro(void)
+{
+  /* Clear RSF flag */
+  RTC->CRL &= (uint16_t)~RTC_FLAG_RSF;
+  /* Loop until RSF flag is set */
+  while ((RTC->CRL & RTC_FLAG_RSF) == (uint16_t)RESET)
+  {
+  }
+}
+
+/**
+  * @brief  Checks whether the specified RTC flag is set or not.
+  * @param  RTC_FLAG: specifies the flag to check.
+  *   This parameter can be one the following values:
+  *     @arg RTC_FLAG_RTOFF: RTC Operation OFF flag
+  *     @arg RTC_FLAG_RSF: Registers Synchronized flag
+  *     @arg RTC_FLAG_OW: Overflow flag
+  *     @arg RTC_FLAG_ALR: Alarm flag
+  *     @arg RTC_FLAG_SEC: Second flag
+  * @retval The new state of RTC_FLAG (SET or RESET).
+  */
+FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  
+  /* Check the parameters */
+  assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); 
+  
+  if ((RTC->CRL & RTC_FLAG) != (uint16_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the RTC's pending flags.
+  * @param  RTC_FLAG: specifies the flag to clear.
+  *   This parameter can be any combination of the following values:
+  *     @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after
+  *                        an APB reset or an APB Clock stop.
+  *     @arg RTC_FLAG_OW: Overflow flag
+  *     @arg RTC_FLAG_ALR: Alarm flag
+  *     @arg RTC_FLAG_SEC: Second flag
+  * @retval None
+  */
+void RTC_ClearFlag(uint16_t RTC_FLAG)
+{
+  /* Check the parameters */
+  assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); 
+    
+  /* Clear the corresponding RTC flag */
+  RTC->CRL &= (uint16_t)~RTC_FLAG;
+}
+
+/**
+  * @brief  Checks whether the specified RTC interrupt has occurred or not.
+  * @param  RTC_IT: specifies the RTC interrupts sources to check.
+  *   This parameter can be one of the following values:
+  *     @arg RTC_IT_OW: Overflow interrupt
+  *     @arg RTC_IT_ALR: Alarm interrupt
+  *     @arg RTC_IT_SEC: Second interrupt
+  * @retval The new state of the RTC_IT (SET or RESET).
+  */
+ITStatus RTC_GetITStatus(uint16_t RTC_IT)
+{
+  ITStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_RTC_GET_IT(RTC_IT)); 
+  
+  bitstatus = (ITStatus)(RTC->CRL & RTC_IT);
+  if (((RTC->CRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET))
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the RTC's interrupt pending bits.
+  * @param  RTC_IT: specifies the interrupt pending bit to clear.
+  *   This parameter can be any combination of the following values:
+  *     @arg RTC_IT_OW: Overflow interrupt
+  *     @arg RTC_IT_ALR: Alarm interrupt
+  *     @arg RTC_IT_SEC: Second interrupt
+  * @retval None
+  */
+void RTC_ClearITPendingBit(uint16_t RTC_IT)
+{
+  /* Check the parameters */
+  assert_param(IS_RTC_IT(RTC_IT));  
+  
+  /* Clear the corresponding RTC pending bit */
+  RTC->CRL &= (uint16_t)~RTC_IT;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_sdio.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_sdio.c
new file mode 100644
index 0000000000000000000000000000000000000000..d1870cef153ff7cfcdb3ad7d9d5dd19481153c8b
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_sdio.c
@@ -0,0 +1,799 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_sdio.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the SDIO firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup SDIO 
+  * @brief SDIO driver modules
+  * @{
+  */ 
+
+/** @defgroup SDIO_Private_TypesDefinitions
+  * @{
+  */ 
+
+/* ------------ SDIO registers bit address in the alias region ----------- */
+#define SDIO_OFFSET                (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET              (SDIO_OFFSET + 0x04)
+#define CLKEN_BitNumber           0x08
+#define CLKCR_CLKEN_BB            (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4))
+
+/* --- CMD Register ---*/
+
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET                (SDIO_OFFSET + 0x0C)
+#define SDIOSUSPEND_BitNumber     0x0B
+#define CMD_SDIOSUSPEND_BB        (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BitNumber      0x0C
+#define CMD_ENCMDCOMPL_BB         (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BitNumber            0x0D
+#define CMD_NIEN_BB               (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BitNumber          0x0E
+#define CMD_ATACMD_BB             (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4))
+
+/* --- DCTRL Register ---*/
+
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET              (SDIO_OFFSET + 0x2C)
+#define DMAEN_BitNumber           0x03
+#define DCTRL_DMAEN_BB            (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BitNumber         0x08
+#define DCTRL_RWSTART_BB          (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BitNumber          0x09
+#define DCTRL_RWSTOP_BB           (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BitNumber           0x0A
+#define DCTRL_RWMOD_BB            (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BitNumber          0x0B
+#define DCTRL_SDIOEN_BB           (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4))
+
+/* ---------------------- SDIO registers bit mask ------------------------ */
+
+/* --- CLKCR Register ---*/
+
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK         ((uint32_t)0xFFFF8100) 
+
+/* --- PWRCTRL Register ---*/
+
+/* SDIO PWRCTRL Mask */
+#define PWR_PWRCTRL_MASK         ((uint32_t)0xFFFFFFFC)
+
+/* --- DCTRL Register ---*/
+
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK         ((uint32_t)0xFFFFFF08)
+
+/* --- CMD Register ---*/
+
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK           ((uint32_t)0xFFFFF800)
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR           ((uint32_t)(SDIO_BASE + 0x14))
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Private_Defines
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SDIO_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the SDIO peripheral registers to their default reset values.
+  * @param  None
+  * @retval None
+  */
+void SDIO_DeInit(void)
+{
+  SDIO->POWER = 0x00000000;
+  SDIO->CLKCR = 0x00000000;
+  SDIO->ARG = 0x00000000;
+  SDIO->CMD = 0x00000000;
+  SDIO->DTIMER = 0x00000000;
+  SDIO->DLEN = 0x00000000;
+  SDIO->DCTRL = 0x00000000;
+  SDIO->ICR = 0x00C007FF;
+  SDIO->MASK = 0x00000000;
+}
+
+/**
+  * @brief  Initializes the SDIO peripheral according to the specified 
+  *         parameters in the SDIO_InitStruct.
+  * @param  SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure 
+  *         that contains the configuration information for the SDIO peripheral.
+  * @retval None
+  */
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct)
+{
+  uint32_t tmpreg = 0;
+    
+  /* Check the parameters */
+  assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge));
+  assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass));
+  assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave));
+  assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide));
+  assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl)); 
+   
+/*---------------------------- SDIO CLKCR Configuration ------------------------*/  
+  /* Get the SDIO CLKCR value */
+  tmpreg = SDIO->CLKCR;
+  
+  /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */
+  tmpreg &= CLKCR_CLEAR_MASK;
+  
+  /* Set CLKDIV bits according to SDIO_ClockDiv value */
+  /* Set PWRSAV bit according to SDIO_ClockPowerSave value */
+  /* Set BYPASS bit according to SDIO_ClockBypass value */
+  /* Set WIDBUS bits according to SDIO_BusWide value */
+  /* Set NEGEDGE bits according to SDIO_ClockEdge value */
+  /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */
+  tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv  | SDIO_InitStruct->SDIO_ClockPowerSave |
+             SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide |
+             SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl); 
+  
+  /* Write to SDIO CLKCR */
+  SDIO->CLKCR = tmpreg;
+}
+
+/**
+  * @brief  Fills each SDIO_InitStruct member with its default value.
+  * @param  SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which 
+  *   will be initialized.
+  * @retval None
+  */
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct)
+{
+  /* SDIO_InitStruct members default value */
+  SDIO_InitStruct->SDIO_ClockDiv = 0x00;
+  SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising;
+  SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable;
+  SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable;
+  SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b;
+  SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable;
+}
+
+/**
+  * @brief  Enables or disables the SDIO Clock.
+  * @param  NewState: new state of the SDIO Clock. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_ClockCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) CLKCR_CLKEN_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Sets the power status of the controller.
+  * @param  SDIO_PowerState: new state of the Power state. 
+  *   This parameter can be one of the following values:
+  *     @arg SDIO_PowerState_OFF
+  *     @arg SDIO_PowerState_ON
+  * @retval None
+  */
+void SDIO_SetPowerState(uint32_t SDIO_PowerState)
+{
+  /* Check the parameters */
+  assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState));
+  
+  SDIO->POWER &= PWR_PWRCTRL_MASK;
+  SDIO->POWER |= SDIO_PowerState;
+}
+
+/**
+  * @brief  Gets the power status of the controller.
+  * @param  None
+  * @retval Power status of the controller. The returned value can
+  *   be one of the following:
+  * - 0x00: Power OFF
+  * - 0x02: Power UP
+  * - 0x03: Power ON 
+  */
+uint32_t SDIO_GetPowerState(void)
+{
+  return (SDIO->POWER & (~PWR_PWRCTRL_MASK));
+}
+
+/**
+  * @brief  Enables or disables the SDIO interrupts.
+  * @param  SDIO_IT: specifies the SDIO interrupt sources to be enabled or disabled.
+  *   This parameter can be one or a combination of the following values:
+  *     @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *     @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *     @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *     @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *     @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *     @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *     @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *     @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *     @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *     @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide 
+  *                            bus mode interrupt
+  *     @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *     @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *     @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *     @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *     @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *     @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *     @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *     @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *     @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *     @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *     @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *     @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *     @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *     @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @param  NewState: new state of the specified SDIO interrupts.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None 
+  */
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_SDIO_IT(SDIO_IT));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the SDIO interrupts */
+    SDIO->MASK |= SDIO_IT;
+  }
+  else
+  {
+    /* Disable the SDIO interrupts */
+    SDIO->MASK &= ~SDIO_IT;
+  } 
+}
+
+/**
+  * @brief  Enables or disables the SDIO DMA request.
+  * @param  NewState: new state of the selected SDIO DMA request.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_DMACmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) DCTRL_DMAEN_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Initializes the SDIO Command according to the specified 
+  *         parameters in the SDIO_CmdInitStruct and send the command.
+  * @param  SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef 
+  *         structure that contains the configuration information for the SDIO command.
+  * @retval None
+  */
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex));
+  assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response));
+  assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait));
+  assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM));
+  
+/*---------------------------- SDIO ARG Configuration ------------------------*/
+  /* Set the SDIO Argument value */
+  SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument;
+  
+/*---------------------------- SDIO CMD Configuration ------------------------*/  
+  /* Get the SDIO CMD value */
+  tmpreg = SDIO->CMD;
+  /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */
+  tmpreg &= CMD_CLEAR_MASK;
+  /* Set CMDINDEX bits according to SDIO_CmdIndex value */
+  /* Set WAITRESP bits according to SDIO_Response value */
+  /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */
+  /* Set CPSMEN bits according to SDIO_CPSM value */
+  tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response
+           | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM;
+  
+  /* Write to SDIO CMD */
+  SDIO->CMD = tmpreg;
+}
+
+/**
+  * @brief  Fills each SDIO_CmdInitStruct member with its default value.
+  * @param  SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef 
+  *         structure which will be initialized.
+  * @retval None
+  */
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct)
+{
+  /* SDIO_CmdInitStruct members default value */
+  SDIO_CmdInitStruct->SDIO_Argument = 0x00;
+  SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00;
+  SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No;
+  SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No;
+  SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable;
+}
+
+/**
+  * @brief  Returns command index of last command for which response received.
+  * @param  None
+  * @retval Returns the command index of the last command response received.
+  */
+uint8_t SDIO_GetCommandResponse(void)
+{
+  return (uint8_t)(SDIO->RESPCMD);
+}
+
+/**
+  * @brief  Returns response received from the card for the last command.
+  * @param  SDIO_RESP: Specifies the SDIO response register. 
+  *   This parameter can be one of the following values:
+  *     @arg SDIO_RESP1: Response Register 1
+  *     @arg SDIO_RESP2: Response Register 2
+  *     @arg SDIO_RESP3: Response Register 3
+  *     @arg SDIO_RESP4: Response Register 4
+  * @retval The Corresponding response register value.
+  */
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP)
+{
+  __IO uint32_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_SDIO_RESP(SDIO_RESP));
+
+  tmp = SDIO_RESP_ADDR + SDIO_RESP;
+  
+  return (*(__IO uint32_t *) tmp); 
+}
+
+/**
+  * @brief  Initializes the SDIO data path according to the specified 
+  *   parameters in the SDIO_DataInitStruct.
+  * @param  SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure that
+  *   contains the configuration information for the SDIO command.
+  * @retval None
+  */
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+  uint32_t tmpreg = 0;
+  
+  /* Check the parameters */
+  assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength));
+  assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize));
+  assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir));
+  assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode));
+  assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM));
+
+/*---------------------------- SDIO DTIMER Configuration ---------------------*/
+  /* Set the SDIO Data TimeOut value */
+  SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut;
+
+/*---------------------------- SDIO DLEN Configuration -----------------------*/
+  /* Set the SDIO DataLength value */
+  SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength;
+
+/*---------------------------- SDIO DCTRL Configuration ----------------------*/  
+  /* Get the SDIO DCTRL value */
+  tmpreg = SDIO->DCTRL;
+  /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */
+  tmpreg &= DCTRL_CLEAR_MASK;
+  /* Set DEN bit according to SDIO_DPSM value */
+  /* Set DTMODE bit according to SDIO_TransferMode value */
+  /* Set DTDIR bit according to SDIO_TransferDir value */
+  /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */
+  tmpreg |= (uint32_t)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir
+           | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM;
+
+  /* Write to SDIO DCTRL */
+  SDIO->DCTRL = tmpreg;
+}
+
+/**
+  * @brief  Fills each SDIO_DataInitStruct member with its default value.
+  * @param  SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef structure which
+  *         will be initialized.
+  * @retval None
+  */
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct)
+{
+  /* SDIO_DataInitStruct members default value */
+  SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF;
+  SDIO_DataInitStruct->SDIO_DataLength = 0x00;
+  SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b;
+  SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard;
+  SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block;  
+  SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable;
+}
+
+/**
+  * @brief  Returns number of remaining data bytes to be transferred.
+  * @param  None
+  * @retval Number of remaining data bytes to be transferred
+  */
+uint32_t SDIO_GetDataCounter(void)
+{ 
+  return SDIO->DCOUNT;
+}
+
+/**
+  * @brief  Read one data word from Rx FIFO.
+  * @param  None
+  * @retval Data received
+  */
+uint32_t SDIO_ReadData(void)
+{ 
+  return SDIO->FIFO;
+}
+
+/**
+  * @brief  Write one data word to Tx FIFO.
+  * @param  Data: 32-bit data word to write.
+  * @retval None
+  */
+void SDIO_WriteData(uint32_t Data)
+{ 
+  SDIO->FIFO = Data;
+}
+
+/**
+  * @brief  Returns the number of words left to be written to or read from FIFO.	
+  * @param  None
+  * @retval Remaining number of words.
+  */
+uint32_t SDIO_GetFIFOCount(void)
+{ 
+  return SDIO->FIFOCNT;
+}
+
+/**
+  * @brief  Starts the SD I/O Read Wait operation.	
+  * @param  NewState: new state of the Start SDIO Read Wait operation. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_StartSDIOReadWait(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) DCTRL_RWSTART_BB = (uint32_t) NewState;
+}
+
+/**
+  * @brief  Stops the SD I/O Read Wait operation.	
+  * @param  NewState: new state of the Stop SDIO Read Wait operation. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_StopSDIOReadWait(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) DCTRL_RWSTOP_BB = (uint32_t) NewState;
+}
+
+/**
+  * @brief  Sets one of the two options of inserting read wait interval.
+  * @param  SDIO_ReadWaitMode: SD I/O Read Wait operation mode.
+  *   This parameter can be:
+  *     @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK
+  *     @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2
+  * @retval None
+  */
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode)
+{
+  /* Check the parameters */
+  assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode));
+  
+  *(__IO uint32_t *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode;
+}
+
+/**
+  * @brief  Enables or disables the SD I/O Mode Operation.
+  * @param  NewState: new state of SDIO specific operation. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_SetSDIOOperation(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) DCTRL_SDIOEN_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Enables or disables the SD I/O Mode suspend command sending.
+  * @param  NewState: new state of the SD I/O Mode suspend command.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) CMD_SDIOSUSPEND_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Enables or disables the command completion signal.
+  * @param  NewState: new state of command completion signal. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_CommandCompletionCmd(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) CMD_ENCMDCOMPL_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Enables or disables the CE-ATA interrupt.
+  * @param  NewState: new state of CE-ATA interrupt. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_CEATAITCmd(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)((~((uint32_t)NewState)) & ((uint32_t)0x1));
+}
+
+/**
+  * @brief  Sends CE-ATA command (CMD61).
+  * @param  NewState: new state of CE-ATA command. This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SDIO_SendCEATACmd(FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  *(__IO uint32_t *) CMD_ATACMD_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Checks whether the specified SDIO flag is set or not.
+  * @param  SDIO_FLAG: specifies the flag to check. 
+  *   This parameter can be one of the following values:
+  *     @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *     @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *     @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *     @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *     @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *     @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *     @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *     @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *     @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *     @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide 
+  *                              bus mode.
+  *     @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *     @arg SDIO_FLAG_CMDACT:   Command transfer in progress
+  *     @arg SDIO_FLAG_TXACT:    Data transmit in progress
+  *     @arg SDIO_FLAG_RXACT:    Data receive in progress
+  *     @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+  *     @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+  *     @arg SDIO_FLAG_TXFIFOF:  Transmit FIFO full
+  *     @arg SDIO_FLAG_RXFIFOF:  Receive FIFO full
+  *     @arg SDIO_FLAG_TXFIFOE:  Transmit FIFO empty
+  *     @arg SDIO_FLAG_RXFIFOE:  Receive FIFO empty
+  *     @arg SDIO_FLAG_TXDAVL:   Data available in transmit FIFO
+  *     @arg SDIO_FLAG_RXDAVL:   Data available in receive FIFO
+  *     @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  *     @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval The new state of SDIO_FLAG (SET or RESET).
+  */
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG)
+{ 
+  FlagStatus bitstatus = RESET;
+  
+  /* Check the parameters */
+  assert_param(IS_SDIO_FLAG(SDIO_FLAG));
+  
+  if ((SDIO->STA & SDIO_FLAG) != (uint32_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the SDIO's pending flags.
+  * @param  SDIO_FLAG: specifies the flag to clear.  
+  *   This parameter can be one or a combination of the following values:
+  *     @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+  *     @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+  *     @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+  *     @arg SDIO_FLAG_DTIMEOUT: Data timeout
+  *     @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+  *     @arg SDIO_FLAG_RXOVERR:  Received FIFO overrun error
+  *     @arg SDIO_FLAG_CMDREND:  Command response received (CRC check passed)
+  *     @arg SDIO_FLAG_CMDSENT:  Command sent (no response required)
+  *     @arg SDIO_FLAG_DATAEND:  Data end (data counter, SDIDCOUNT, is zero)
+  *     @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide 
+  *                              bus mode
+  *     @arg SDIO_FLAG_DBCKEND:  Data block sent/received (CRC check passed)
+  *     @arg SDIO_FLAG_SDIOIT:   SD I/O interrupt received
+  *     @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval None
+  */
+void SDIO_ClearFlag(uint32_t SDIO_FLAG)
+{ 
+  /* Check the parameters */
+  assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG));
+   
+  SDIO->ICR = SDIO_FLAG;
+}
+
+/**
+  * @brief  Checks whether the specified SDIO interrupt has occurred or not.
+  * @param  SDIO_IT: specifies the SDIO interrupt source to check. 
+  *   This parameter can be one of the following values:
+  *     @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *     @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *     @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *     @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *     @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *     @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *     @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *     @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *     @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *     @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide 
+  *                            bus mode interrupt
+  *     @arg SDIO_IT_DBCKEND:  Data block sent/received (CRC check passed) interrupt
+  *     @arg SDIO_IT_CMDACT:   Command transfer in progress interrupt
+  *     @arg SDIO_IT_TXACT:    Data transmit in progress interrupt
+  *     @arg SDIO_IT_RXACT:    Data receive in progress interrupt
+  *     @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+  *     @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+  *     @arg SDIO_IT_TXFIFOF:  Transmit FIFO full interrupt
+  *     @arg SDIO_IT_RXFIFOF:  Receive FIFO full interrupt
+  *     @arg SDIO_IT_TXFIFOE:  Transmit FIFO empty interrupt
+  *     @arg SDIO_IT_RXFIFOE:  Receive FIFO empty interrupt
+  *     @arg SDIO_IT_TXDAVL:   Data available in transmit FIFO interrupt
+  *     @arg SDIO_IT_RXDAVL:   Data available in receive FIFO interrupt
+  *     @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *     @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+  * @retval The new state of SDIO_IT (SET or RESET).
+  */
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT)
+{ 
+  ITStatus bitstatus = RESET;
+  
+  /* Check the parameters */
+  assert_param(IS_SDIO_GET_IT(SDIO_IT));
+  if ((SDIO->STA & SDIO_IT) != (uint32_t)RESET)  
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the SDIO's interrupt pending bits.
+  * @param  SDIO_IT: specifies the interrupt pending bit to clear. 
+  *   This parameter can be one or a combination of the following values:
+  *     @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+  *     @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+  *     @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+  *     @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+  *     @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+  *     @arg SDIO_IT_RXOVERR:  Received FIFO overrun error interrupt
+  *     @arg SDIO_IT_CMDREND:  Command response received (CRC check passed) interrupt
+  *     @arg SDIO_IT_CMDSENT:  Command sent (no response required) interrupt
+  *     @arg SDIO_IT_DATAEND:  Data end (data counter, SDIDCOUNT, is zero) interrupt
+  *     @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide 
+  *                            bus mode interrupt
+  *     @arg SDIO_IT_SDIOIT:   SD I/O interrupt received interrupt
+  *     @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+  * @retval None
+  */
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT)
+{ 
+  /* Check the parameters */
+  assert_param(IS_SDIO_CLEAR_IT(SDIO_IT));
+   
+  SDIO->ICR = SDIO_IT;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_spi.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_spi.c
new file mode 100644
index 0000000000000000000000000000000000000000..51a9cce7736fa1243cc433ac8364f74493f489cd
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_spi.c
@@ -0,0 +1,908 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_spi.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the SPI firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_spi.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup SPI 
+  * @brief SPI driver modules
+  * @{
+  */ 
+
+/** @defgroup SPI_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup SPI_Private_Defines
+  * @{
+  */
+
+/* SPI SPE mask */
+#define CR1_SPE_Set          ((uint16_t)0x0040)
+#define CR1_SPE_Reset        ((uint16_t)0xFFBF)
+
+/* I2S I2SE mask */
+#define I2SCFGR_I2SE_Set     ((uint16_t)0x0400)
+#define I2SCFGR_I2SE_Reset   ((uint16_t)0xFBFF)
+
+/* SPI CRCNext mask */
+#define CR1_CRCNext_Set      ((uint16_t)0x1000)
+
+/* SPI CRCEN mask */
+#define CR1_CRCEN_Set        ((uint16_t)0x2000)
+#define CR1_CRCEN_Reset      ((uint16_t)0xDFFF)
+
+/* SPI SSOE mask */
+#define CR2_SSOE_Set         ((uint16_t)0x0004)
+#define CR2_SSOE_Reset       ((uint16_t)0xFFFB)
+
+/* SPI registers Masks */
+#define CR1_CLEAR_Mask       ((uint16_t)0x3040)
+#define I2SCFGR_CLEAR_Mask   ((uint16_t)0xF040)
+
+/* SPI or I2S mode selection masks */
+#define SPI_Mode_Select      ((uint16_t)0xF7FF)
+#define I2S_Mode_Select      ((uint16_t)0x0800) 
+
+/* I2S clock source selection masks */
+#define I2S2_CLOCK_SRC       ((uint32_t)(0x00020000))
+#define I2S3_CLOCK_SRC       ((uint32_t)(0x00040000))
+#define I2S_MUL_MASK         ((uint32_t)(0x0000F000))
+#define I2S_DIV_MASK         ((uint32_t)(0x000000F0))
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup SPI_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the SPIx peripheral registers to their default
+  *         reset values (Affects also the I2Ss).
+  * @param  SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+  * @retval None
+  */
+void SPI_I2S_DeInit(SPI_TypeDef* SPIx)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+
+  if (SPIx == SPI1)
+  {
+    /* Enable SPI1 reset state */
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE);
+    /* Release SPI1 from reset state */
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE);
+  }
+  else if (SPIx == SPI2)
+  {
+    /* Enable SPI2 reset state */
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE);
+    /* Release SPI2 from reset state */
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE);
+  }
+  else
+  {
+    if (SPIx == SPI3)
+    {
+      /* Enable SPI3 reset state */
+      RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE);
+      /* Release SPI3 from reset state */
+      RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE);
+    }
+  }
+}
+
+/**
+  * @brief  Initializes the SPIx peripheral according to the specified 
+  *         parameters in the SPI_InitStruct.
+  * @param  SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+  * @param  SPI_InitStruct: pointer to a SPI_InitTypeDef structure that
+  *         contains the configuration information for the specified SPI peripheral.
+  * @retval None
+  */
+void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct)
+{
+  uint16_t tmpreg = 0;
+  
+  /* check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));   
+  
+  /* Check the SPI parameters */
+  assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction));
+  assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode));
+  assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize));
+  assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL));
+  assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA));
+  assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS));
+  assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler));
+  assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit));
+  assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial));
+
+/*---------------------------- SPIx CR1 Configuration ------------------------*/
+  /* Get the SPIx CR1 value */
+  tmpreg = SPIx->CR1;
+  /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */
+  tmpreg &= CR1_CLEAR_Mask;
+  /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler
+     master/salve mode, CPOL and CPHA */
+  /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */
+  /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */
+  /* Set LSBFirst bit according to SPI_FirstBit value */
+  /* Set BR bits according to SPI_BaudRatePrescaler value */
+  /* Set CPOL bit according to SPI_CPOL value */
+  /* Set CPHA bit according to SPI_CPHA value */
+  tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode |
+                  SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL |  
+                  SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS |  
+                  SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit);
+  /* Write to SPIx CR1 */
+  SPIx->CR1 = tmpreg;
+  
+  /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */
+  SPIx->I2SCFGR &= SPI_Mode_Select;		
+
+/*---------------------------- SPIx CRCPOLY Configuration --------------------*/
+  /* Write to SPIx CRCPOLY */
+  SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial;
+}
+
+/**
+  * @brief  Initializes the SPIx peripheral according to the specified 
+  *         parameters in the I2S_InitStruct.
+  * @param  SPIx: where x can be  2 or 3 to select the SPI peripheral
+  *         (configured in I2S mode).
+  * @param  I2S_InitStruct: pointer to an I2S_InitTypeDef structure that
+  *         contains the configuration information for the specified SPI peripheral
+  *         configured in I2S mode.
+  * @note
+  *  The function calculates the optimal prescaler needed to obtain the most 
+  *  accurate audio frequency (depending on the I2S clock source, the PLL values 
+  *  and the product configuration). But in case the prescaler value is greater 
+  *  than 511, the default value (0x02) will be configured instead.  *   
+  * @retval None
+  */
+void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct)
+{
+  uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
+  uint32_t tmp = 0;
+  RCC_ClocksTypeDef RCC_Clocks;
+  uint32_t sourceclock = 0;
+  
+  /* Check the I2S parameters */
+  assert_param(IS_SPI_23_PERIPH(SPIx));
+  assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode));
+  assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard));
+  assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat));
+  assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput));
+  assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq));
+  assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL));  
+
+/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/
+  /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
+  SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask; 
+  SPIx->I2SPR = 0x0002;
+  
+  /* Get the I2SCFGR register value */
+  tmpreg = SPIx->I2SCFGR;
+  
+  /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/
+  if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default)
+  {
+    i2sodd = (uint16_t)0;
+    i2sdiv = (uint16_t)2;   
+  }
+  /* If the requested audio frequency is not the default, compute the prescaler */
+  else
+  {
+    /* Check the frame length (For the Prescaler computing) */
+    if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b)
+    {
+      /* Packet length is 16 bits */
+      packetlength = 1;
+    }
+    else
+    {
+      /* Packet length is 32 bits */
+      packetlength = 2;
+    }
+
+    /* Get the I2S clock source mask depending on the peripheral number */
+    if(((uint32_t)SPIx) == SPI2_BASE)
+    {
+      /* The mask is relative to I2S2 */
+      tmp = I2S2_CLOCK_SRC;
+    }
+    else 
+    {
+      /* The mask is relative to I2S3 */      
+      tmp = I2S3_CLOCK_SRC;
+    }
+
+    /* Check the I2S clock source configuration depending on the Device:
+       Only Connectivity line devices have the PLL3 VCO clock */
+#ifdef STM32F10X_CL
+    if((RCC->CFGR2 & tmp) != 0)
+    {
+      /* Get the configuration bits of RCC PLL3 multiplier */
+      tmp = (uint32_t)((RCC->CFGR2 & I2S_MUL_MASK) >> 12);
+
+      /* Get the value of the PLL3 multiplier */      
+      if((tmp > 5) && (tmp < 15))
+      {
+        /* Multiplier is between 8 and 14 (value 15 is forbidden) */
+        tmp += 2;
+      }
+      else
+      {
+        if (tmp == 15)
+        {
+          /* Multiplier is 20 */
+          tmp = 20;
+        }
+      }      
+      /* Get the PREDIV2 value */
+      sourceclock = (uint32_t)(((RCC->CFGR2 & I2S_DIV_MASK) >> 4) + 1);
+      
+      /* Calculate the Source Clock frequency based on PLL3 and PREDIV2 values */
+      sourceclock = (uint32_t) ((HSE_Value / sourceclock) * tmp * 2); 
+    }
+    else
+    {
+      /* I2S Clock source is System clock: Get System Clock frequency */
+      RCC_GetClocksFreq(&RCC_Clocks);      
+      
+      /* Get the source clock value: based on System Clock value */
+      sourceclock = RCC_Clocks.SYSCLK_Frequency;
+    }        
+#else /* STM32F10X_HD */
+    /* I2S Clock source is System clock: Get System Clock frequency */
+    RCC_GetClocksFreq(&RCC_Clocks);      
+      
+    /* Get the source clock value: based on System Clock value */
+    sourceclock = RCC_Clocks.SYSCLK_Frequency;    
+#endif /* STM32F10X_CL */    
+
+    /* Compute the Real divider depending on the MCLK output state with a floating point */
+    if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable)
+    {
+      /* MCLK output is enabled */
+      tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5);
+    }
+    else
+    {
+      /* MCLK output is disabled */
+      tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5);
+    }
+    
+    /* Remove the floating point */
+    tmp = tmp / 10;  
+      
+    /* Check the parity of the divider */
+    i2sodd = (uint16_t)(tmp & (uint16_t)0x0001);
+   
+    /* Compute the i2sdiv prescaler */
+    i2sdiv = (uint16_t)((tmp - i2sodd) / 2);
+   
+    /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
+    i2sodd = (uint16_t) (i2sodd << 8);
+  }
+  
+  /* Test if the divider is 1 or 0 or greater than 0xFF */
+  if ((i2sdiv < 2) || (i2sdiv > 0xFF))
+  {
+    /* Set the default values */
+    i2sdiv = 2;
+    i2sodd = 0;
+  }
+
+  /* Write to SPIx I2SPR register the computed value */
+  SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput));  
+ 
+  /* Configure the I2S with the SPI_InitStruct values */
+  tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | \
+                  (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \
+                  (uint16_t)I2S_InitStruct->I2S_CPOL))));
+ 
+  /* Write to SPIx I2SCFGR */  
+  SPIx->I2SCFGR = tmpreg;   
+}
+
+/**
+  * @brief  Fills each SPI_InitStruct member with its default value.
+  * @param  SPI_InitStruct : pointer to a SPI_InitTypeDef structure which will be initialized.
+  * @retval None
+  */
+void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct)
+{
+/*--------------- Reset SPI init structure parameters values -----------------*/
+  /* Initialize the SPI_Direction member */
+  SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex;
+  /* initialize the SPI_Mode member */
+  SPI_InitStruct->SPI_Mode = SPI_Mode_Slave;
+  /* initialize the SPI_DataSize member */
+  SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b;
+  /* Initialize the SPI_CPOL member */
+  SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low;
+  /* Initialize the SPI_CPHA member */
+  SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge;
+  /* Initialize the SPI_NSS member */
+  SPI_InitStruct->SPI_NSS = SPI_NSS_Hard;
+  /* Initialize the SPI_BaudRatePrescaler member */
+  SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2;
+  /* Initialize the SPI_FirstBit member */
+  SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB;
+  /* Initialize the SPI_CRCPolynomial member */
+  SPI_InitStruct->SPI_CRCPolynomial = 7;
+}
+
+/**
+  * @brief  Fills each I2S_InitStruct member with its default value.
+  * @param  I2S_InitStruct : pointer to a I2S_InitTypeDef structure which will be initialized.
+  * @retval None
+  */
+void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct)
+{
+/*--------------- Reset I2S init structure parameters values -----------------*/
+  /* Initialize the I2S_Mode member */
+  I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx;
+  
+  /* Initialize the I2S_Standard member */
+  I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips;
+  
+  /* Initialize the I2S_DataFormat member */
+  I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b;
+  
+  /* Initialize the I2S_MCLKOutput member */
+  I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable;
+  
+  /* Initialize the I2S_AudioFreq member */
+  I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default;
+  
+  /* Initialize the I2S_CPOL member */
+  I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low;
+}
+
+/**
+  * @brief  Enables or disables the specified SPI peripheral.
+  * @param  SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+  * @param  NewState: new state of the SPIx peripheral. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected SPI peripheral */
+    SPIx->CR1 |= CR1_SPE_Set;
+  }
+  else
+  {
+    /* Disable the selected SPI peripheral */
+    SPIx->CR1 &= CR1_SPE_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified SPI peripheral (in I2S mode).
+  * @param  SPIx: where x can be 2 or 3 to select the SPI peripheral.
+  * @param  NewState: new state of the SPIx peripheral. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_23_PERIPH(SPIx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected SPI peripheral (in I2S mode) */
+    SPIx->I2SCFGR |= I2SCFGR_I2SE_Set;
+  }
+  else
+  {
+    /* Disable the selected SPI peripheral (in I2S mode) */
+    SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified SPI/I2S interrupts.
+  * @param  SPIx: where x can be
+  *   - 1, 2 or 3 in SPI mode 
+  *   - 2 or 3 in I2S mode
+  * @param  SPI_I2S_IT: specifies the SPI/I2S interrupt source to be enabled or disabled. 
+  *   This parameter can be one of the following values:
+  *     @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask
+  *     @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask
+  *     @arg SPI_I2S_IT_ERR: Error interrupt mask
+  * @param  NewState: new state of the specified SPI/I2S interrupt.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState)
+{
+  uint16_t itpos = 0, itmask = 0 ;
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT));
+
+  /* Get the SPI/I2S IT index */
+  itpos = SPI_I2S_IT >> 4;
+
+  /* Set the IT mask */
+  itmask = (uint16_t)1 << (uint16_t)itpos;
+
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected SPI/I2S interrupt */
+    SPIx->CR2 |= itmask;
+  }
+  else
+  {
+    /* Disable the selected SPI/I2S interrupt */
+    SPIx->CR2 &= (uint16_t)~itmask;
+  }
+}
+
+/**
+  * @brief  Enables or disables the SPIx/I2Sx DMA interface.
+  * @param  SPIx: where x can be
+  *   - 1, 2 or 3 in SPI mode 
+  *   - 2 or 3 in I2S mode
+  * @param  SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request to be enabled or disabled. 
+  *   This parameter can be any combination of the following values:
+  *     @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request
+  *     @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request
+  * @param  NewState: new state of the selected SPI/I2S DMA transfer request.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected SPI/I2S DMA requests */
+    SPIx->CR2 |= SPI_I2S_DMAReq;
+  }
+  else
+  {
+    /* Disable the selected SPI/I2S DMA requests */
+    SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq;
+  }
+}
+
+/**
+  * @brief  Transmits a Data through the SPIx/I2Sx peripheral.
+  * @param  SPIx: where x can be
+  *   - 1, 2 or 3 in SPI mode 
+  *   - 2 or 3 in I2S mode
+  * @param  Data : Data to be transmitted.
+  * @retval None
+  */
+void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  
+  /* Write in the DR register the data to be sent */
+  SPIx->DR = Data;
+}
+
+/**
+  * @brief  Returns the most recent received data by the SPIx/I2Sx peripheral. 
+  * @param  SPIx: where x can be
+  *   - 1, 2 or 3 in SPI mode 
+  *   - 2 or 3 in I2S mode
+  * @retval The value of the received data.
+  */
+uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  
+  /* Return the data in the DR register */
+  return SPIx->DR;
+}
+
+/**
+  * @brief  Configures internally by software the NSS pin for the selected SPI.
+  * @param  SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+  * @param  SPI_NSSInternalSoft: specifies the SPI NSS internal state.
+  *   This parameter can be one of the following values:
+  *     @arg SPI_NSSInternalSoft_Set: Set NSS pin internally
+  *     @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally
+  * @retval None
+  */
+void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft));
+  if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset)
+  {
+    /* Set NSS pin internally by software */
+    SPIx->CR1 |= SPI_NSSInternalSoft_Set;
+  }
+  else
+  {
+    /* Reset NSS pin internally by software */
+    SPIx->CR1 &= SPI_NSSInternalSoft_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the SS output for the selected SPI.
+  * @param  SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+  * @param  NewState: new state of the SPIx SS output. 
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected SPI SS output */
+    SPIx->CR2 |= CR2_SSOE_Set;
+  }
+  else
+  {
+    /* Disable the selected SPI SS output */
+    SPIx->CR2 &= CR2_SSOE_Reset;
+  }
+}
+
+/**
+  * @brief  Configures the data size for the selected SPI.
+  * @param  SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+  * @param  SPI_DataSize: specifies the SPI data size.
+  *   This parameter can be one of the following values:
+  *     @arg SPI_DataSize_16b: Set data frame format to 16bit
+  *     @arg SPI_DataSize_8b: Set data frame format to 8bit
+  * @retval None
+  */
+void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_SPI_DATASIZE(SPI_DataSize));
+  /* Clear DFF bit */
+  SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b;
+  /* Set new DFF bit value */
+  SPIx->CR1 |= SPI_DataSize;
+}
+
+/**
+  * @brief  Transmit the SPIx CRC value.
+  * @param  SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+  * @retval None
+  */
+void SPI_TransmitCRC(SPI_TypeDef* SPIx)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  
+  /* Enable the selected SPI CRC transmission */
+  SPIx->CR1 |= CR1_CRCNext_Set;
+}
+
+/**
+  * @brief  Enables or disables the CRC value calculation of the transferred bytes.
+  * @param  SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+  * @param  NewState: new state of the SPIx CRC value calculation.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected SPI CRC calculation */
+    SPIx->CR1 |= CR1_CRCEN_Set;
+  }
+  else
+  {
+    /* Disable the selected SPI CRC calculation */
+    SPIx->CR1 &= CR1_CRCEN_Reset;
+  }
+}
+
+/**
+  * @brief  Returns the transmit or the receive CRC register value for the specified SPI.
+  * @param  SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+  * @param  SPI_CRC: specifies the CRC register to be read.
+  *   This parameter can be one of the following values:
+  *     @arg SPI_CRC_Tx: Selects Tx CRC register
+  *     @arg SPI_CRC_Rx: Selects Rx CRC register
+  * @retval The selected CRC register value..
+  */
+uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC)
+{
+  uint16_t crcreg = 0;
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_SPI_CRC(SPI_CRC));
+  if (SPI_CRC != SPI_CRC_Rx)
+  {
+    /* Get the Tx CRC register */
+    crcreg = SPIx->TXCRCR;
+  }
+  else
+  {
+    /* Get the Rx CRC register */
+    crcreg = SPIx->RXCRCR;
+  }
+  /* Return the selected CRC register */
+  return crcreg;
+}
+
+/**
+  * @brief  Returns the CRC Polynomial register value for the specified SPI.
+  * @param  SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+  * @retval The CRC Polynomial register value.
+  */
+uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  
+  /* Return the CRC polynomial register */
+  return SPIx->CRCPR;
+}
+
+/**
+  * @brief  Selects the data transfer direction in bi-directional mode for the specified SPI.
+  * @param  SPIx: where x can be 1, 2 or 3 to select the SPI peripheral.
+  * @param  SPI_Direction: specifies the data transfer direction in bi-directional mode. 
+  *   This parameter can be one of the following values:
+  *     @arg SPI_Direction_Tx: Selects Tx transmission direction
+  *     @arg SPI_Direction_Rx: Selects Rx receive direction
+  * @retval None
+  */
+void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_SPI_DIRECTION(SPI_Direction));
+  if (SPI_Direction == SPI_Direction_Tx)
+  {
+    /* Set the Tx only mode */
+    SPIx->CR1 |= SPI_Direction_Tx;
+  }
+  else
+  {
+    /* Set the Rx only mode */
+    SPIx->CR1 &= SPI_Direction_Rx;
+  }
+}
+
+/**
+  * @brief  Checks whether the specified SPI/I2S flag is set or not.
+  * @param  SPIx: where x can be
+  *   - 1, 2 or 3 in SPI mode 
+  *   - 2 or 3 in I2S mode
+  * @param  SPI_I2S_FLAG: specifies the SPI/I2S flag to check. 
+  *   This parameter can be one of the following values:
+  *     @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag.
+  *     @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag.
+  *     @arg SPI_I2S_FLAG_BSY: Busy flag.
+  *     @arg SPI_I2S_FLAG_OVR: Overrun flag.
+  *     @arg SPI_FLAG_MODF: Mode Fault flag.
+  *     @arg SPI_FLAG_CRCERR: CRC Error flag.
+  *     @arg I2S_FLAG_UDR: Underrun Error flag.
+  *     @arg I2S_FLAG_CHSIDE: Channel Side flag.
+  * @retval The new state of SPI_I2S_FLAG (SET or RESET).
+  */
+FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG));
+  /* Check the status of the specified SPI/I2S flag */
+  if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET)
+  {
+    /* SPI_I2S_FLAG is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* SPI_I2S_FLAG is reset */
+    bitstatus = RESET;
+  }
+  /* Return the SPI_I2S_FLAG status */
+  return  bitstatus;
+}
+
+/**
+  * @brief  Clears the SPIx CRC Error (CRCERR) flag.
+  * @param  SPIx: where x can be
+  *   - 1, 2 or 3 in SPI mode 
+  * @param  SPI_I2S_FLAG: specifies the SPI flag to clear. 
+  *   This function clears only CRCERR flag.
+  * @note
+  *   - OVR (OverRun error) flag is cleared by software sequence: a read 
+  *     operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read 
+  *     operation to SPI_SR register (SPI_I2S_GetFlagStatus()).
+  *   - UDR (UnderRun error) flag is cleared by a read operation to 
+  *     SPI_SR register (SPI_I2S_GetFlagStatus()).
+  *   - MODF (Mode Fault) flag is cleared by software sequence: a read/write 
+  *     operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a 
+  *     write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI).
+  * @retval None
+  */
+void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG)
+{
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG));
+    
+    /* Clear the selected SPI CRC Error (CRCERR) flag */
+    SPIx->SR = (uint16_t)~SPI_I2S_FLAG;
+}
+
+/**
+  * @brief  Checks whether the specified SPI/I2S interrupt has occurred or not.
+  * @param  SPIx: where x can be
+  *   - 1, 2 or 3 in SPI mode 
+  *   - 2 or 3 in I2S mode
+  * @param  SPI_I2S_IT: specifies the SPI/I2S interrupt source to check. 
+  *   This parameter can be one of the following values:
+  *     @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt.
+  *     @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt.
+  *     @arg SPI_I2S_IT_OVR: Overrun interrupt.
+  *     @arg SPI_IT_MODF: Mode Fault interrupt.
+  *     @arg SPI_IT_CRCERR: CRC Error interrupt.
+  *     @arg I2S_IT_UDR: Underrun Error interrupt.
+  * @retval The new state of SPI_I2S_IT (SET or RESET).
+  */
+ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
+{
+  ITStatus bitstatus = RESET;
+  uint16_t itpos = 0, itmask = 0, enablestatus = 0;
+
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT));
+
+  /* Get the SPI/I2S IT index */
+  itpos = 0x01 << (SPI_I2S_IT & 0x0F);
+
+  /* Get the SPI/I2S IT mask */
+  itmask = SPI_I2S_IT >> 4;
+
+  /* Set the IT mask */
+  itmask = 0x01 << itmask;
+
+  /* Get the SPI_I2S_IT enable bit status */
+  enablestatus = (SPIx->CR2 & itmask) ;
+
+  /* Check the status of the specified SPI/I2S interrupt */
+  if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus)
+  {
+    /* SPI_I2S_IT is set */
+    bitstatus = SET;
+  }
+  else
+  {
+    /* SPI_I2S_IT is reset */
+    bitstatus = RESET;
+  }
+  /* Return the SPI_I2S_IT status */
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the SPIx CRC Error (CRCERR) interrupt pending bit.
+  * @param  SPIx: where x can be
+  *   - 1, 2 or 3 in SPI mode 
+  * @param  SPI_I2S_IT: specifies the SPI interrupt pending bit to clear.
+  *   This function clears only CRCERR interrupt pending bit.   
+  * @note
+  *   - OVR (OverRun Error) interrupt pending bit is cleared by software 
+  *     sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData()) 
+  *     followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()).
+  *   - UDR (UnderRun Error) interrupt pending bit is cleared by a read 
+  *     operation to SPI_SR register (SPI_I2S_GetITStatus()).
+  *   - MODF (Mode Fault) interrupt pending bit is cleared by software sequence:
+  *     a read/write operation to SPI_SR register (SPI_I2S_GetITStatus()) 
+  *     followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable 
+  *     the SPI).
+  * @retval None
+  */
+void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT)
+{
+  uint16_t itpos = 0;
+  /* Check the parameters */
+  assert_param(IS_SPI_ALL_PERIPH(SPIx));
+  assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT));
+
+  /* Get the SPI IT index */
+  itpos = 0x01 << (SPI_I2S_IT & 0x0F);
+
+  /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */
+  SPIx->SR = (uint16_t)~itpos;
+}
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_tim.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_tim.c
new file mode 100644
index 0000000000000000000000000000000000000000..81c8484e398966de93a41eba3b57b0329b780e81
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_tim.c
@@ -0,0 +1,2890 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_tim.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the TIM firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_tim.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup TIM 
+  * @brief TIM driver modules
+  * @{
+  */
+
+/** @defgroup TIM_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Private_Defines
+  * @{
+  */
+
+/* ---------------------- TIM registers bit mask ------------------------ */
+#define SMCR_ETR_Mask               ((uint16_t)0x00FF) 
+#define CCMR_Offset                 ((uint16_t)0x0018)
+#define CCER_CCE_Set                ((uint16_t)0x0001)  
+#define	CCER_CCNE_Set               ((uint16_t)0x0004) 
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Private_FunctionPrototypes
+  * @{
+  */
+
+static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+                       uint16_t TIM_ICFilter);
+static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+                       uint16_t TIM_ICFilter);
+static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+                       uint16_t TIM_ICFilter);
+static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+                       uint16_t TIM_ICFilter);
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup TIM_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the TIMx peripheral registers to their default reset values.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @retval None
+  */
+void TIM_DeInit(TIM_TypeDef* TIMx)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx)); 
+ 
+  if (TIMx == TIM1)
+  {
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE);  
+  }     
+  else if (TIMx == TIM2)
+  {
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE);
+  }
+  else if (TIMx == TIM3)
+  {
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE);
+  }
+  else if (TIMx == TIM4)
+  {
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE);
+  } 
+  else if (TIMx == TIM5)
+  {
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE);
+  } 
+  else if (TIMx == TIM6)
+  {
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE);
+  } 
+  else if (TIMx == TIM7)
+  {
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE);
+  } 
+  else if (TIMx == TIM8)
+  {
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE);
+  }
+  else if (TIMx == TIM9)
+  {      
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM9, DISABLE);  
+   }  
+  else if (TIMx == TIM10)
+  {      
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM10, DISABLE);  
+  }  
+  else if (TIMx == TIM11) 
+  {     
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM11, DISABLE);  
+  }  
+  else if (TIMx == TIM12)
+  {      
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM12, DISABLE);  
+  }  
+  else if (TIMx == TIM13) 
+  {       
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM13, DISABLE);  
+  }
+  else if (TIMx == TIM14) 
+  {       
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM14, DISABLE);  
+  }        
+  else if (TIMx == TIM15)
+  {
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM15, DISABLE);
+  } 
+  else if (TIMx == TIM16)
+  {
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM16, DISABLE);
+  } 
+  else
+  {
+    if (TIMx == TIM17)
+    {
+      RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, ENABLE);
+      RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM17, DISABLE);
+    }  
+  }
+}
+
+/**
+  * @brief  Initializes the TIMx Time Base Unit peripheral according to 
+  *         the specified parameters in the TIM_TimeBaseInitStruct.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef
+  *         structure that contains the configuration information for the 
+  *         specified TIM peripheral.
+  * @retval None
+  */
+void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
+{
+  uint16_t tmpcr1 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx)); 
+  assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode));
+  assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision));
+
+  tmpcr1 = TIMx->CR1;  
+
+  if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM2) || (TIMx == TIM3)||
+     (TIMx == TIM4) || (TIMx == TIM5)) 
+  {
+    /* Select the Counter Mode */
+    tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
+    tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_CounterMode;
+  }
+ 
+  if((TIMx != TIM6) && (TIMx != TIM7))
+  {
+    /* Set the clock division */
+    tmpcr1 &= (uint16_t)(~((uint16_t)TIM_CR1_CKD));
+    tmpcr1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision;
+  }
+
+  TIMx->CR1 = tmpcr1;
+
+  /* Set the Autoreload value */
+  TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ;
+ 
+  /* Set the Prescaler value */
+  TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler;
+    
+  if ((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)|| (TIMx == TIM16) || (TIMx == TIM17))  
+  {
+    /* Set the Repetition Counter value */
+    TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter;
+  }
+
+  /* Generate an update event to reload the Prescaler and the Repetition counter
+     values immediately */
+  TIMx->EGR = TIM_PSCReloadMode_Immediate;           
+}
+
+/**
+  * @brief  Initializes the TIMx Channel1 according to the specified
+  *         parameters in the TIM_OCInitStruct.
+  * @param  TIMx: where x can be  1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @param  TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+  *         that contains the configuration information for the specified TIM peripheral.
+  * @retval None
+  */
+void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+  uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+   
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+  assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+  assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+  assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));   
+ /* Disable the Channel 1: Reset the CC1E Bit */
+  TIMx->CCER &= (uint16_t)(~(uint16_t)TIM_CCER_CC1E);
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+  
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR1;
+    
+  /* Reset the Output Compare Mode Bits */
+  tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC1M));
+  tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC1S));
+
+  /* Select the Output Compare Mode */
+  tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
+  
+  /* Reset the Output Polarity level */
+  tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1P));
+  /* Set the Output Compare Polarity */
+  tmpccer |= TIM_OCInitStruct->TIM_OCPolarity;
+  
+  /* Set the Output State */
+  tmpccer |= TIM_OCInitStruct->TIM_OutputState;
+    
+  if((TIMx == TIM1) || (TIMx == TIM8)|| (TIMx == TIM15)||
+     (TIMx == TIM16)|| (TIMx == TIM17))
+  {
+    assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+    assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+    assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+    assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+    
+    /* Reset the Output N Polarity level */
+    tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NP));
+    /* Set the Output N Polarity */
+    tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity;
+    
+    /* Reset the Output N State */
+    tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC1NE));    
+    /* Set the Output N State */
+    tmpccer |= TIM_OCInitStruct->TIM_OutputNState;
+    
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1));
+    tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS1N));
+    
+    /* Set the Output Idle state */
+    tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState;
+    /* Set the Output N Idle state */
+    tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState;
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+  
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; 
+ 
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Initializes the TIMx Channel2 according to the specified
+  *         parameters in the TIM_OCInitStruct.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 8, 9, 12 or 15 to select 
+  *         the TIM peripheral.
+  * @param  TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+  *         that contains the configuration information for the specified TIM peripheral.
+  * @retval None
+  */
+void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+  uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+   
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx)); 
+  assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+  assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+  assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));   
+   /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC2E));
+  
+  /* Get the TIMx CCER register value */  
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+  
+  /* Get the TIMx CCMR1 register value */
+  tmpccmrx = TIMx->CCMR1;
+    
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_OC2M));
+  tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S));
+  
+  /* Select the Output Compare Mode */
+  tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8);
+  
+  /* Reset the Output Polarity level */
+  tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2P));
+  /* Set the Output Compare Polarity */
+  tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4);
+  
+  /* Set the Output State */
+  tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4);
+    
+  if((TIMx == TIM1) || (TIMx == TIM8))
+  {
+    assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+    assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+    assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+    assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+    
+    /* Reset the Output N Polarity level */
+    tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NP));
+    /* Set the Output N Polarity */
+    tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4);
+    
+    /* Reset the Output N State */
+    tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC2NE));    
+    /* Set the Output N State */
+    tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4);
+    
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2));
+    tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS2N));
+    
+    /* Set the Output Idle state */
+    tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2);
+    /* Set the Output N Idle state */
+    tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2);
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+  
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse;
+  
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Initializes the TIMx Channel3 according to the specified
+  *         parameters in the TIM_OCInitStruct.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+  *         that contains the configuration information for the specified TIM peripheral.
+  * @retval None
+  */
+void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+  uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+   
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx)); 
+  assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+  assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+  assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));   
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC3E));
+  
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+  
+  /* Get the TIMx CCMR2 register value */
+  tmpccmrx = TIMx->CCMR2;
+    
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC3M));
+  tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC3S));  
+  /* Select the Output Compare Mode */
+  tmpccmrx |= TIM_OCInitStruct->TIM_OCMode;
+  
+  /* Reset the Output Polarity level */
+  tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3P));
+  /* Set the Output Compare Polarity */
+  tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8);
+  
+  /* Set the Output State */
+  tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8);
+    
+  if((TIMx == TIM1) || (TIMx == TIM8))
+  {
+    assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState));
+    assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity));
+    assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState));
+    assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+    
+    /* Reset the Output N Polarity level */
+    tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NP));
+    /* Set the Output N Polarity */
+    tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8);
+    /* Reset the Output N State */
+    tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC3NE));
+    
+    /* Set the Output N State */
+    tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8);
+    /* Reset the Output Compare and Output Compare N IDLE State */
+    tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3));
+    tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS3N));
+    /* Set the Output Idle state */
+    tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4);
+    /* Set the Output N Idle state */
+    tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4);
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+  
+  /* Write to TIMx CCMR2 */
+  TIMx->CCMR2 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse;
+  
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Initializes the TIMx Channel4 according to the specified
+  *         parameters in the TIM_OCInitStruct.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure
+  *         that contains the configuration information for the specified TIM peripheral.
+  * @retval None
+  */
+void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+  uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0;
+   
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx)); 
+  assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode));
+  assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState));
+  assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity));   
+  /* Disable the Channel 2: Reset the CC4E Bit */
+  TIMx->CCER &= (uint16_t)(~((uint16_t)TIM_CCER_CC4E));
+  
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  /* Get the TIMx CR2 register value */
+  tmpcr2 =  TIMx->CR2;
+  
+  /* Get the TIMx CCMR2 register value */
+  tmpccmrx = TIMx->CCMR2;
+    
+  /* Reset the Output Compare mode and Capture/Compare selection Bits */
+  tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_OC4M));
+  tmpccmrx &= (uint16_t)(~((uint16_t)TIM_CCMR2_CC4S));
+  
+  /* Select the Output Compare Mode */
+  tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8);
+  
+  /* Reset the Output Polarity level */
+  tmpccer &= (uint16_t)(~((uint16_t)TIM_CCER_CC4P));
+  /* Set the Output Compare Polarity */
+  tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12);
+  
+  /* Set the Output State */
+  tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12);
+    
+  if((TIMx == TIM1) || (TIMx == TIM8))
+  {
+    assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState));
+    /* Reset the Output Compare IDLE State */
+    tmpcr2 &= (uint16_t)(~((uint16_t)TIM_CR2_OIS4));
+    /* Set the Output Idle state */
+    tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6);
+  }
+  /* Write to TIMx CR2 */
+  TIMx->CR2 = tmpcr2;
+  
+  /* Write to TIMx CCMR2 */  
+  TIMx->CCMR2 = tmpccmrx;
+
+  /* Set the Capture Compare Register value */
+  TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse;
+  
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Initializes the TIM peripheral according to the specified
+  *         parameters in the TIM_ICInitStruct.
+  * @param  TIMx: where x can be  1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @param  TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure
+  *         that contains the configuration information for the specified TIM peripheral.
+  * @retval None
+  */
+void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel));  
+  assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection));
+  assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler));
+  assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter));
+  
+  if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+     (TIMx == TIM4) ||(TIMx == TIM5))
+  {
+    assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity));
+  }
+  else
+  {
+    assert_param(IS_TIM_IC_POLARITY_LITE(TIM_ICInitStruct->TIM_ICPolarity));
+  }
+  if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
+  {
+    assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+    /* TI1 Configuration */
+    TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+               TIM_ICInitStruct->TIM_ICSelection,
+               TIM_ICInitStruct->TIM_ICFilter);
+    /* Set the Input Capture Prescaler value */
+    TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+  }
+  else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2)
+  {
+    assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+    /* TI2 Configuration */
+    TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+               TIM_ICInitStruct->TIM_ICSelection,
+               TIM_ICInitStruct->TIM_ICFilter);
+    /* Set the Input Capture Prescaler value */
+    TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+  }
+  else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3)
+  {
+    assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+    /* TI3 Configuration */
+    TI3_Config(TIMx,  TIM_ICInitStruct->TIM_ICPolarity,
+               TIM_ICInitStruct->TIM_ICSelection,
+               TIM_ICInitStruct->TIM_ICFilter);
+    /* Set the Input Capture Prescaler value */
+    TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+  }
+  else
+  {
+    assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+    /* TI4 Configuration */
+    TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity,
+               TIM_ICInitStruct->TIM_ICSelection,
+               TIM_ICInitStruct->TIM_ICFilter);
+    /* Set the Input Capture Prescaler value */
+    TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+  }
+}
+
+/**
+  * @brief  Configures the TIM peripheral according to the specified
+  *         parameters in the TIM_ICInitStruct to measure an external PWM signal.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+  * @param  TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure
+  *         that contains the configuration information for the specified TIM peripheral.
+  * @retval None
+  */
+void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+  uint16_t icoppositepolarity = TIM_ICPolarity_Rising;
+  uint16_t icoppositeselection = TIM_ICSelection_DirectTI;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  /* Select the Opposite Input Polarity */
+  if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising)
+  {
+    icoppositepolarity = TIM_ICPolarity_Falling;
+  }
+  else
+  {
+    icoppositepolarity = TIM_ICPolarity_Rising;
+  }
+  /* Select the Opposite Input */
+  if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI)
+  {
+    icoppositeselection = TIM_ICSelection_IndirectTI;
+  }
+  else
+  {
+    icoppositeselection = TIM_ICSelection_DirectTI;
+  }
+  if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1)
+  {
+    /* TI1 Configuration */
+    TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
+               TIM_ICInitStruct->TIM_ICFilter);
+    /* Set the Input Capture Prescaler value */
+    TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+    /* TI2 Configuration */
+    TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);
+    /* Set the Input Capture Prescaler value */
+    TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+  }
+  else
+  { 
+    /* TI2 Configuration */
+    TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection,
+               TIM_ICInitStruct->TIM_ICFilter);
+    /* Set the Input Capture Prescaler value */
+    TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+    /* TI1 Configuration */
+    TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter);
+    /* Set the Input Capture Prescaler value */
+    TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler);
+  }
+}
+
+/**
+  * @brief  Configures the: Break feature, dead time, Lock level, the OSSI,
+  *         the OSSR State and the AOE(automatic output enable).
+  * @param  TIMx: where x can be  1 or 8 to select the TIM 
+  * @param  TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that
+  *         contains the BDTR Register configuration  information for the TIM peripheral.
+  * @retval None
+  */
+void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+  assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState));
+  assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState));
+  assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel));
+  assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break));
+  assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity));
+  assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput));
+  /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State,
+     the OSSI State, the dead time value and the Automatic Output Enable Bit */
+  TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState |
+             TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime |
+             TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity |
+             TIM_BDTRInitStruct->TIM_AutomaticOutput;
+}
+
+/**
+  * @brief  Fills each TIM_TimeBaseInitStruct member with its default value.
+  * @param  TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef
+  *         structure which will be initialized.
+  * @retval None
+  */
+void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct)
+{
+  /* Set the default configuration */
+  TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF;
+  TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000;
+  TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1;
+  TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up;
+  TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000;
+}
+
+/**
+  * @brief  Fills each TIM_OCInitStruct member with its default value.
+  * @param  TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure which will
+  *         be initialized.
+  * @retval None
+  */
+void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct)
+{
+  /* Set the default configuration */
+  TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing;
+  TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable;
+  TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable;
+  TIM_OCInitStruct->TIM_Pulse = 0x0000;
+  TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High;
+  TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High;
+  TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset;
+  TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset;
+}
+
+/**
+  * @brief  Fills each TIM_ICInitStruct member with its default value.
+  * @param  TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure which will
+  *         be initialized.
+  * @retval None
+  */
+void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct)
+{
+  /* Set the default configuration */
+  TIM_ICInitStruct->TIM_Channel = TIM_Channel_1;
+  TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising;
+  TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI;
+  TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1;
+  TIM_ICInitStruct->TIM_ICFilter = 0x00;
+}
+
+/**
+  * @brief  Fills each TIM_BDTRInitStruct member with its default value.
+  * @param  TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which
+  *         will be initialized.
+  * @retval None
+  */
+void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct)
+{
+  /* Set the default configuration */
+  TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable;
+  TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable;
+  TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF;
+  TIM_BDTRInitStruct->TIM_DeadTime = 0x00;
+  TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable;
+  TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low;
+  TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable;
+}
+
+/**
+  * @brief  Enables or disables the specified TIM peripheral.
+  * @param  TIMx: where x can be 1 to 17 to select the TIMx peripheral.
+  * @param  NewState: new state of the TIMx peripheral.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the TIM Counter */
+    TIMx->CR1 |= TIM_CR1_CEN;
+  }
+  else
+  {
+    /* Disable the TIM Counter */
+    TIMx->CR1 &= (uint16_t)(~((uint16_t)TIM_CR1_CEN));
+  }
+}
+
+/**
+  * @brief  Enables or disables the TIM peripheral Main Outputs.
+  * @param  TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral.
+  * @param  NewState: new state of the TIM peripheral Main Outputs.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the TIM Main Output */
+    TIMx->BDTR |= TIM_BDTR_MOE;
+  }
+  else
+  {
+    /* Disable the TIM Main Output */
+    TIMx->BDTR &= (uint16_t)(~((uint16_t)TIM_BDTR_MOE));
+  }  
+}
+
+/**
+  * @brief  Enables or disables the specified TIM interrupts.
+  * @param  TIMx: where x can be 1 to 17 to select the TIMx peripheral.
+  * @param  TIM_IT: specifies the TIM interrupts sources to be enabled or disabled.
+  *   This parameter can be any combination of the following values:
+  *     @arg TIM_IT_Update: TIM update Interrupt source
+  *     @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+  *     @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+  *     @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+  *     @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+  *     @arg TIM_IT_COM: TIM Commutation Interrupt source
+  *     @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+  *     @arg TIM_IT_Break: TIM Break Interrupt source
+  * @note 
+  *   - TIM6 and TIM7 can only generate an update interrupt.
+  *   - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+  *      TIM_IT_CC2 or TIM_IT_Trigger. 
+  *   - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.   
+  *   - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. 
+  *   - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.    
+  * @param  NewState: new state of the TIM interrupts.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState)
+{  
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_TIM_IT(TIM_IT));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the Interrupt sources */
+    TIMx->DIER |= TIM_IT;
+  }
+  else
+  {
+    /* Disable the Interrupt sources */
+    TIMx->DIER &= (uint16_t)~TIM_IT;
+  }
+}
+
+/**
+  * @brief  Configures the TIMx event to be generate by software.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  TIM_EventSource: specifies the event source.
+  *   This parameter can be one or more of the following values:	   
+  *     @arg TIM_EventSource_Update: Timer update Event source
+  *     @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source
+  *     @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source
+  *     @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source
+  *     @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source
+  *     @arg TIM_EventSource_COM: Timer COM event source  
+  *     @arg TIM_EventSource_Trigger: Timer Trigger Event source
+  *     @arg TIM_EventSource_Break: Timer Break event source
+  * @note 
+  *   - TIM6 and TIM7 can only generate an update event. 
+  *   - TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8.      
+  * @retval None
+  */
+void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource)
+{ 
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource));
+  
+  /* Set the event sources */
+  TIMx->EGR = TIM_EventSource;
+}
+
+/**
+  * @brief  Configures the TIMx's DMA interface.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 8, 15, 16 or 17 to select 
+  *   the TIM peripheral.
+  * @param  TIM_DMABase: DMA Base address.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR,
+  *          TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR,
+  *          TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER,
+  *          TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR,
+  *          TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2,
+  *          TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR,
+  *          TIM_DMABase_DCR.
+  * @param  TIM_DMABurstLength: DMA Burst length.
+  *   This parameter can be one value between:
+  *   TIM_DMABurstLength_1Transfer and TIM_DMABurstLength_18Transfers.
+  * @retval None
+  */
+void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+  assert_param(IS_TIM_DMA_BASE(TIM_DMABase));
+  assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength));
+  /* Set the DMA Base and the DMA Burst Length */
+  TIMx->DCR = TIM_DMABase | TIM_DMABurstLength;
+}
+
+/**
+  * @brief  Enables or disables the TIMx's DMA Requests.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 6, 7, 8, 15, 16 or 17 
+  *   to select the TIM peripheral. 
+  * @param  TIM_DMASource: specifies the DMA Request sources.
+  *   This parameter can be any combination of the following values:
+  *     @arg TIM_DMA_Update: TIM update Interrupt source
+  *     @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
+  *     @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
+  *     @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
+  *     @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
+  *     @arg TIM_DMA_COM: TIM Commutation DMA source
+  *     @arg TIM_DMA_Trigger: TIM Trigger DMA source
+  * @param  NewState: new state of the DMA Request sources.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST9_PERIPH(TIMx));
+  assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the DMA sources */
+    TIMx->DIER |= TIM_DMASource; 
+  }
+  else
+  {
+    /* Disable the DMA sources */
+    TIMx->DIER &= (uint16_t)~TIM_DMASource;
+  }
+}
+
+/**
+  * @brief  Configures the TIMx internal Clock
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 8, 9, 12 or 15
+  *         to select the TIM peripheral.
+  * @retval None
+  */
+void TIM_InternalClockConfig(TIM_TypeDef* TIMx)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  /* Disable slave mode to clock the prescaler directly with the internal clock */
+  TIMx->SMCR &=  (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+}
+
+/**
+  * @brief  Configures the TIMx Internal Trigger as External Clock
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral.
+  * @param  TIM_ITRSource: Trigger source.
+  *   This parameter can be one of the following values:
+  * @param  TIM_TS_ITR0: Internal Trigger 0
+  * @param  TIM_TS_ITR1: Internal Trigger 1
+  * @param  TIM_TS_ITR2: Internal Trigger 2
+  * @param  TIM_TS_ITR3: Internal Trigger 3
+  * @retval None
+  */
+void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource));
+  /* Select the Internal Trigger */
+  TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource);
+  /* Select the External clock mode1 */
+  TIMx->SMCR |= TIM_SlaveMode_External1;
+}
+
+/**
+  * @brief  Configures the TIMx Trigger as External Clock
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 9, 12 or 15 to select the TIM peripheral.
+  * @param  TIM_TIxExternalCLKSource: Trigger source.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector
+  *     @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1
+  *     @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2
+  * @param  TIM_ICPolarity: specifies the TIx Polarity.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICPolarity_Rising
+  *     @arg TIM_ICPolarity_Falling
+  * @param  ICFilter : specifies the filter value.
+  *   This parameter must be a value between 0x0 and 0xF.
+  * @retval None
+  */
+void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource,
+                                uint16_t TIM_ICPolarity, uint16_t ICFilter)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource));
+  assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity));
+  assert_param(IS_TIM_IC_FILTER(ICFilter));
+  /* Configure the Timer Input Clock Source */
+  if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2)
+  {
+    TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
+  }
+  else
+  {
+    TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter);
+  }
+  /* Select the Trigger source */
+  TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource);
+  /* Select the External clock mode1 */
+  TIMx->SMCR |= TIM_SlaveMode_External1;
+}
+
+/**
+  * @brief  Configures the External clock Mode1
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+  *     @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+  *     @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+  *     @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+  * @param  TIM_ExtTRGPolarity: The external Trigger Polarity.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+  *     @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+  * @param  ExtTRGFilter: External Trigger Filter.
+  *   This parameter must be a value between 0x00 and 0x0F
+  * @retval None
+  */
+void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+                             uint16_t ExtTRGFilter)
+{
+  uint16_t tmpsmcr = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+  assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+  assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+  /* Configure the ETR Clock source */
+  TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);
+  
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = TIMx->SMCR;
+  /* Reset the SMS Bits */
+  tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+  /* Select the External clock mode1 */
+  tmpsmcr |= TIM_SlaveMode_External1;
+  /* Select the Trigger selection : ETRF */
+  tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS));
+  tmpsmcr |= TIM_TS_ETRF;
+  /* Write to TIMx SMCR */
+  TIMx->SMCR = tmpsmcr;
+}
+
+/**
+  * @brief  Configures the External clock Mode2
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+  *     @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+  *     @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+  *     @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+  * @param  TIM_ExtTRGPolarity: The external Trigger Polarity.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+  *     @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+  * @param  ExtTRGFilter: External Trigger Filter.
+  *   This parameter must be a value between 0x00 and 0x0F
+  * @retval None
+  */
+void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, 
+                             uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+  assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+  assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+  /* Configure the ETR Clock source */
+  TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter);
+  /* Enable the External clock mode2 */
+  TIMx->SMCR |= TIM_SMCR_ECE;
+}
+
+/**
+  * @brief  Configures the TIMx External Trigger (ETR).
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_ExtTRGPrescaler: The external Trigger Prescaler.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF.
+  *     @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
+  *     @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
+  *     @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
+  * @param  TIM_ExtTRGPolarity: The external Trigger Polarity.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
+  *     @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
+  * @param  ExtTRGFilter: External Trigger Filter.
+  *   This parameter must be a value between 0x00 and 0x0F
+  * @retval None
+  */
+void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity,
+                   uint16_t ExtTRGFilter)
+{
+  uint16_t tmpsmcr = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler));
+  assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity));
+  assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter));
+  tmpsmcr = TIMx->SMCR;
+  /* Reset the ETR Bits */
+  tmpsmcr &= SMCR_ETR_Mask;
+  /* Set the Prescaler, the Filter value and the Polarity */
+  tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8)));
+  /* Write to TIMx SMCR */
+  TIMx->SMCR = tmpsmcr;
+}
+
+/**
+  * @brief  Configures the TIMx Prescaler.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  Prescaler: specifies the Prescaler Register value
+  * @param  TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode
+  *   This parameter can be one of the following values:
+  *     @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event.
+  *     @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediately.
+  * @retval None
+  */
+void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode));
+  /* Set the Prescaler value */
+  TIMx->PSC = Prescaler;
+  /* Set or reset the UG Bit */
+  TIMx->EGR = TIM_PSCReloadMode;
+}
+
+/**
+  * @brief  Specifies the TIMx Counter Mode to be used.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_CounterMode: specifies the Counter Mode to be used
+  *   This parameter can be one of the following values:
+  *     @arg TIM_CounterMode_Up: TIM Up Counting Mode
+  *     @arg TIM_CounterMode_Down: TIM Down Counting Mode
+  *     @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1
+  *     @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2
+  *     @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3
+  * @retval None
+  */
+void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode)
+{
+  uint16_t tmpcr1 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode));
+  tmpcr1 = TIMx->CR1;
+  /* Reset the CMS and DIR Bits */
+  tmpcr1 &= (uint16_t)(~((uint16_t)(TIM_CR1_DIR | TIM_CR1_CMS)));
+  /* Set the Counter Mode */
+  tmpcr1 |= TIM_CounterMode;
+  /* Write to TIMx CR1 register */
+  TIMx->CR1 = tmpcr1;
+}
+
+/**
+  * @brief  Selects the Input Trigger source
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+  * @param  TIM_InputTriggerSource: The Input Trigger source.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_TS_ITR0: Internal Trigger 0
+  *     @arg TIM_TS_ITR1: Internal Trigger 1
+  *     @arg TIM_TS_ITR2: Internal Trigger 2
+  *     @arg TIM_TS_ITR3: Internal Trigger 3
+  *     @arg TIM_TS_TI1F_ED: TI1 Edge Detector
+  *     @arg TIM_TS_TI1FP1: Filtered Timer Input 1
+  *     @arg TIM_TS_TI2FP2: Filtered Timer Input 2
+  *     @arg TIM_TS_ETRF: External Trigger input
+  * @retval None
+  */
+void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource)
+{
+  uint16_t tmpsmcr = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource));
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = TIMx->SMCR;
+  /* Reset the TS Bits */
+  tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_TS));
+  /* Set the Input Trigger source */
+  tmpsmcr |= TIM_InputTriggerSource;
+  /* Write to TIMx SMCR */
+  TIMx->SMCR = tmpsmcr;
+}
+
+/**
+  * @brief  Configures the TIMx Encoder Interface.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_EncoderMode: specifies the TIMx Encoder Mode.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level.
+  *     @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level.
+  *     @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending
+  *                                on the level of the other input.
+  * @param  TIM_IC1Polarity: specifies the IC1 Polarity
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICPolarity_Falling: IC Falling edge.
+  *     @arg TIM_ICPolarity_Rising: IC Rising edge.
+  * @param  TIM_IC2Polarity: specifies the IC2 Polarity
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICPolarity_Falling: IC Falling edge.
+  *     @arg TIM_ICPolarity_Rising: IC Rising edge.
+  * @retval None
+  */
+void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode,
+                                uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity)
+{
+  uint16_t tmpsmcr = 0;
+  uint16_t tmpccmr1 = 0;
+  uint16_t tmpccer = 0;
+    
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST5_PERIPH(TIMx));
+  assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode));
+  assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity));
+  assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity));
+
+  /* Get the TIMx SMCR register value */
+  tmpsmcr = TIMx->SMCR;
+  
+  /* Get the TIMx CCMR1 register value */
+  tmpccmr1 = TIMx->CCMR1;
+  
+  /* Get the TIMx CCER register value */
+  tmpccer = TIMx->CCER;
+  
+  /* Set the encoder Mode */
+  tmpsmcr &= (uint16_t)(~((uint16_t)TIM_SMCR_SMS));
+  tmpsmcr |= TIM_EncoderMode;
+  
+  /* Select the Capture Compare 1 and the Capture Compare 2 as input */
+  tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & (uint16_t)(~((uint16_t)TIM_CCMR1_CC2S)));
+  tmpccmr1 |= TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0;
+  
+  /* Set the TI1 and the TI2 Polarities */
+  tmpccer &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCER_CC1P)) & ((uint16_t)~((uint16_t)TIM_CCER_CC2P)));
+  tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4));
+  
+  /* Write to TIMx SMCR */
+  TIMx->SMCR = tmpsmcr;
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmr1;
+  /* Write to TIMx CCER */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Forces the TIMx output 1 waveform to active or inactive level.
+  * @param  TIMx: where x can be  1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @param  TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ForcedAction_Active: Force active level on OC1REF
+  *     @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF.
+  * @retval None
+  */
+void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+  uint16_t tmpccmr1 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+  assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+  tmpccmr1 = TIMx->CCMR1;
+  /* Reset the OC1M Bits */
+  tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1M);
+  /* Configure The Forced output Mode */
+  tmpccmr1 |= TIM_ForcedAction;
+  /* Write to TIMx CCMR1 register */
+  TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+  * @brief  Forces the TIMx output 2 waveform to active or inactive level.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+  * @param  TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ForcedAction_Active: Force active level on OC2REF
+  *     @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF.
+  * @retval None
+  */
+void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+  uint16_t tmpccmr1 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+  tmpccmr1 = TIMx->CCMR1;
+  /* Reset the OC2M Bits */
+  tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2M);
+  /* Configure The Forced output Mode */
+  tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8);
+  /* Write to TIMx CCMR1 register */
+  TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+  * @brief  Forces the TIMx output 3 waveform to active or inactive level.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ForcedAction_Active: Force active level on OC3REF
+  *     @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF.
+  * @retval None
+  */
+void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+  uint16_t tmpccmr2 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+  tmpccmr2 = TIMx->CCMR2;
+  /* Reset the OC1M Bits */
+  tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3M);
+  /* Configure The Forced output Mode */
+  tmpccmr2 |= TIM_ForcedAction;
+  /* Write to TIMx CCMR2 register */
+  TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+  * @brief  Forces the TIMx output 4 waveform to active or inactive level.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_ForcedAction: specifies the forced Action to be set to the output waveform.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ForcedAction_Active: Force active level on OC4REF
+  *     @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF.
+  * @retval None
+  */
+void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction)
+{
+  uint16_t tmpccmr2 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction));
+  tmpccmr2 = TIMx->CCMR2;
+  /* Reset the OC2M Bits */
+  tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4M);
+  /* Configure The Forced output Mode */
+  tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8);
+  /* Write to TIMx CCMR2 register */
+  TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+  * @brief  Enables or disables TIMx peripheral Preload register on ARR.
+  * @param  TIMx: where x can be  1 to 17 to select the TIM peripheral.
+  * @param  NewState: new state of the TIMx peripheral Preload register
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Set the ARR Preload Bit */
+    TIMx->CR1 |= TIM_CR1_ARPE;
+  }
+  else
+  {
+    /* Reset the ARR Preload Bit */
+    TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_ARPE);
+  }
+}
+
+/**
+  * @brief  Selects the TIM peripheral Commutation event.
+  * @param  TIMx: where x can be  1, 8, 15, 16 or 17 to select the TIMx peripheral
+  * @param  NewState: new state of the Commutation event.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Set the COM Bit */
+    TIMx->CR2 |= TIM_CR2_CCUS;
+  }
+  else
+  {
+    /* Reset the COM Bit */
+    TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCUS);
+  }
+}
+
+/**
+  * @brief  Selects the TIMx peripheral Capture Compare DMA source.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 8, 15, 16 or 17 to select 
+  *         the TIM peripheral.
+  * @param  NewState: new state of the Capture Compare DMA source
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST4_PERIPH(TIMx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Set the CCDS Bit */
+    TIMx->CR2 |= TIM_CR2_CCDS;
+  }
+  else
+  {
+    /* Reset the CCDS Bit */
+    TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCDS);
+  }
+}
+
+/**
+  * @brief  Sets or Resets the TIM peripheral Capture Compare Preload Control bit.
+  * @param  TIMx: where x can be   1, 2, 3, 4, 5, 8 or 15 
+  *         to select the TIMx peripheral
+  * @param  NewState: new state of the Capture Compare Preload Control bit
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState)
+{ 
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST5_PERIPH(TIMx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Set the CCPC Bit */
+    TIMx->CR2 |= TIM_CR2_CCPC;
+  }
+  else
+  {
+    /* Reset the CCPC Bit */
+    TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_CCPC);
+  }
+}
+
+/**
+  * @brief  Enables or disables the TIMx peripheral Preload register on CCR1.
+  * @param  TIMx: where x can be  1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @param  TIM_OCPreload: new state of the TIMx peripheral Preload register
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCPreload_Enable
+  *     @arg TIM_OCPreload_Disable
+  * @retval None
+  */
+void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+  uint16_t tmpccmr1 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+  assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+  tmpccmr1 = TIMx->CCMR1;
+  /* Reset the OC1PE Bit */
+  tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1PE);
+  /* Enable or Disable the Output Compare Preload feature */
+  tmpccmr1 |= TIM_OCPreload;
+  /* Write to TIMx CCMR1 register */
+  TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+  * @brief  Enables or disables the TIMx peripheral Preload register on CCR2.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 8, 9, 12 or 15 to select 
+  *         the TIM peripheral.
+  * @param  TIM_OCPreload: new state of the TIMx peripheral Preload register
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCPreload_Enable
+  *     @arg TIM_OCPreload_Disable
+  * @retval None
+  */
+void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+  uint16_t tmpccmr1 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+  tmpccmr1 = TIMx->CCMR1;
+  /* Reset the OC2PE Bit */
+  tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2PE);
+  /* Enable or Disable the Output Compare Preload feature */
+  tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8);
+  /* Write to TIMx CCMR1 register */
+  TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+  * @brief  Enables or disables the TIMx peripheral Preload register on CCR3.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCPreload: new state of the TIMx peripheral Preload register
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCPreload_Enable
+  *     @arg TIM_OCPreload_Disable
+  * @retval None
+  */
+void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+  uint16_t tmpccmr2 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+  tmpccmr2 = TIMx->CCMR2;
+  /* Reset the OC3PE Bit */
+  tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3PE);
+  /* Enable or Disable the Output Compare Preload feature */
+  tmpccmr2 |= TIM_OCPreload;
+  /* Write to TIMx CCMR2 register */
+  TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+  * @brief  Enables or disables the TIMx peripheral Preload register on CCR4.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCPreload: new state of the TIMx peripheral Preload register
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCPreload_Enable
+  *     @arg TIM_OCPreload_Disable
+  * @retval None
+  */
+void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload)
+{
+  uint16_t tmpccmr2 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload));
+  tmpccmr2 = TIMx->CCMR2;
+  /* Reset the OC4PE Bit */
+  tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4PE);
+  /* Enable or Disable the Output Compare Preload feature */
+  tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8);
+  /* Write to TIMx CCMR2 register */
+  TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+  * @brief  Configures the TIMx Output Compare 1 Fast feature.
+  * @param  TIMx: where x can be  1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @param  TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCFast_Enable: TIM output compare fast enable
+  *     @arg TIM_OCFast_Disable: TIM output compare fast disable
+  * @retval None
+  */
+void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+  uint16_t tmpccmr1 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+  assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+  /* Get the TIMx CCMR1 register value */
+  tmpccmr1 = TIMx->CCMR1;
+  /* Reset the OC1FE Bit */
+  tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1FE);
+  /* Enable or Disable the Output Compare Fast Bit */
+  tmpccmr1 |= TIM_OCFast;
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+  * @brief  Configures the TIMx Output Compare 2 Fast feature.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5, 8, 9, 12 or 15 to select 
+  *         the TIM peripheral.
+  * @param  TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCFast_Enable: TIM output compare fast enable
+  *     @arg TIM_OCFast_Disable: TIM output compare fast disable
+  * @retval None
+  */
+void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+  uint16_t tmpccmr1 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+  /* Get the TIMx CCMR1 register value */
+  tmpccmr1 = TIMx->CCMR1;
+  /* Reset the OC2FE Bit */
+  tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2FE);
+  /* Enable or Disable the Output Compare Fast Bit */
+  tmpccmr1 |= (uint16_t)(TIM_OCFast << 8);
+  /* Write to TIMx CCMR1 */
+  TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+  * @brief  Configures the TIMx Output Compare 3 Fast feature.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCFast_Enable: TIM output compare fast enable
+  *     @arg TIM_OCFast_Disable: TIM output compare fast disable
+  * @retval None
+  */
+void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+  uint16_t tmpccmr2 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+  /* Get the TIMx CCMR2 register value */
+  tmpccmr2 = TIMx->CCMR2;
+  /* Reset the OC3FE Bit */
+  tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3FE);
+  /* Enable or Disable the Output Compare Fast Bit */
+  tmpccmr2 |= TIM_OCFast;
+  /* Write to TIMx CCMR2 */
+  TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+  * @brief  Configures the TIMx Output Compare 4 Fast feature.
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCFast: new state of the Output Compare Fast Enable Bit.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCFast_Enable: TIM output compare fast enable
+  *     @arg TIM_OCFast_Disable: TIM output compare fast disable
+  * @retval None
+  */
+void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast)
+{
+  uint16_t tmpccmr2 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast));
+  /* Get the TIMx CCMR2 register value */
+  tmpccmr2 = TIMx->CCMR2;
+  /* Reset the OC4FE Bit */
+  tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4FE);
+  /* Enable or Disable the Output Compare Fast Bit */
+  tmpccmr2 |= (uint16_t)(TIM_OCFast << 8);
+  /* Write to TIMx CCMR2 */
+  TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+  * @brief  Clears or safeguards the OCREF1 signal on an external event
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCClear_Enable: TIM Output clear enable
+  *     @arg TIM_OCClear_Disable: TIM Output clear disable
+  * @retval None
+  */
+void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+  uint16_t tmpccmr1 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+
+  tmpccmr1 = TIMx->CCMR1;
+
+  /* Reset the OC1CE Bit */
+  tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC1CE);
+  /* Enable or Disable the Output Compare Clear Bit */
+  tmpccmr1 |= TIM_OCClear;
+  /* Write to TIMx CCMR1 register */
+  TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+  * @brief  Clears or safeguards the OCREF2 signal on an external event
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCClear_Enable: TIM Output clear enable
+  *     @arg TIM_OCClear_Disable: TIM Output clear disable
+  * @retval None
+  */
+void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+  uint16_t tmpccmr1 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+  tmpccmr1 = TIMx->CCMR1;
+  /* Reset the OC2CE Bit */
+  tmpccmr1 &= (uint16_t)~((uint16_t)TIM_CCMR1_OC2CE);
+  /* Enable or Disable the Output Compare Clear Bit */
+  tmpccmr1 |= (uint16_t)(TIM_OCClear << 8);
+  /* Write to TIMx CCMR1 register */
+  TIMx->CCMR1 = tmpccmr1;
+}
+
+/**
+  * @brief  Clears or safeguards the OCREF3 signal on an external event
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCClear_Enable: TIM Output clear enable
+  *     @arg TIM_OCClear_Disable: TIM Output clear disable
+  * @retval None
+  */
+void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+  uint16_t tmpccmr2 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+  tmpccmr2 = TIMx->CCMR2;
+  /* Reset the OC3CE Bit */
+  tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC3CE);
+  /* Enable or Disable the Output Compare Clear Bit */
+  tmpccmr2 |= TIM_OCClear;
+  /* Write to TIMx CCMR2 register */
+  TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+  * @brief  Clears or safeguards the OCREF4 signal on an external event
+  * @param  TIMx: where x can be  1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCClear: new state of the Output Compare Clear Enable Bit.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCClear_Enable: TIM Output clear enable
+  *     @arg TIM_OCClear_Disable: TIM Output clear disable
+  * @retval None
+  */
+void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear)
+{
+  uint16_t tmpccmr2 = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear));
+  tmpccmr2 = TIMx->CCMR2;
+  /* Reset the OC4CE Bit */
+  tmpccmr2 &= (uint16_t)~((uint16_t)TIM_CCMR2_OC4CE);
+  /* Enable or Disable the Output Compare Clear Bit */
+  tmpccmr2 |= (uint16_t)(TIM_OCClear << 8);
+  /* Write to TIMx CCMR2 register */
+  TIMx->CCMR2 = tmpccmr2;
+}
+
+/**
+  * @brief  Configures the TIMx channel 1 polarity.
+  * @param  TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @param  TIM_OCPolarity: specifies the OC1 Polarity
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCPolarity_High: Output Compare active high
+  *     @arg TIM_OCPolarity_Low: Output Compare active low
+  * @retval None
+  */
+void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+  uint16_t tmpccer = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+  assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+  tmpccer = TIMx->CCER;
+  /* Set or Reset the CC1P Bit */
+  tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1P);
+  tmpccer |= TIM_OCPolarity;
+  /* Write to TIMx CCER register */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configures the TIMx Channel 1N polarity.
+  * @param  TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
+  * @param  TIM_OCNPolarity: specifies the OC1N Polarity
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCNPolarity_High: Output Compare active high
+  *     @arg TIM_OCNPolarity_Low: Output Compare active low
+  * @retval None
+  */
+void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+  uint16_t tmpccer = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+  assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+   
+  tmpccer = TIMx->CCER;
+  /* Set or Reset the CC1NP Bit */
+  tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC1NP);
+  tmpccer |= TIM_OCNPolarity;
+  /* Write to TIMx CCER register */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configures the TIMx channel 2 polarity.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+  * @param  TIM_OCPolarity: specifies the OC2 Polarity
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCPolarity_High: Output Compare active high
+  *     @arg TIM_OCPolarity_Low: Output Compare active low
+  * @retval None
+  */
+void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+  uint16_t tmpccer = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+  tmpccer = TIMx->CCER;
+  /* Set or Reset the CC2P Bit */
+  tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2P);
+  tmpccer |= (uint16_t)(TIM_OCPolarity << 4);
+  /* Write to TIMx CCER register */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configures the TIMx Channel 2N polarity.
+  * @param  TIMx: where x can be 1 or 8 to select the TIM peripheral.
+  * @param  TIM_OCNPolarity: specifies the OC2N Polarity
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCNPolarity_High: Output Compare active high
+  *     @arg TIM_OCNPolarity_Low: Output Compare active low
+  * @retval None
+  */
+void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+  uint16_t tmpccer = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+  assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+  
+  tmpccer = TIMx->CCER;
+  /* Set or Reset the CC2NP Bit */
+  tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC2NP);
+  tmpccer |= (uint16_t)(TIM_OCNPolarity << 4);
+  /* Write to TIMx CCER register */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configures the TIMx channel 3 polarity.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCPolarity: specifies the OC3 Polarity
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCPolarity_High: Output Compare active high
+  *     @arg TIM_OCPolarity_Low: Output Compare active low
+  * @retval None
+  */
+void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+  uint16_t tmpccer = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+  tmpccer = TIMx->CCER;
+  /* Set or Reset the CC3P Bit */
+  tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3P);
+  tmpccer |= (uint16_t)(TIM_OCPolarity << 8);
+  /* Write to TIMx CCER register */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configures the TIMx Channel 3N polarity.
+  * @param  TIMx: where x can be 1 or 8 to select the TIM peripheral.
+  * @param  TIM_OCNPolarity: specifies the OC3N Polarity
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCNPolarity_High: Output Compare active high
+  *     @arg TIM_OCNPolarity_Low: Output Compare active low
+  * @retval None
+  */
+void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity)
+{
+  uint16_t tmpccer = 0;
+ 
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST1_PERIPH(TIMx));
+  assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity));
+    
+  tmpccer = TIMx->CCER;
+  /* Set or Reset the CC3NP Bit */
+  tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC3NP);
+  tmpccer |= (uint16_t)(TIM_OCNPolarity << 8);
+  /* Write to TIMx CCER register */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configures the TIMx channel 4 polarity.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_OCPolarity: specifies the OC4 Polarity
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCPolarity_High: Output Compare active high
+  *     @arg TIM_OCPolarity_Low: Output Compare active low
+  * @retval None
+  */
+void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity)
+{
+  uint16_t tmpccer = 0;
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity));
+  tmpccer = TIMx->CCER;
+  /* Set or Reset the CC4P Bit */
+  tmpccer &= (uint16_t)~((uint16_t)TIM_CCER_CC4P);
+  tmpccer |= (uint16_t)(TIM_OCPolarity << 12);
+  /* Write to TIMx CCER register */
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Enables or disables the TIM Capture Compare Channel x.
+  * @param  TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @param  TIM_Channel: specifies the TIM Channel
+  *   This parameter can be one of the following values:
+  *     @arg TIM_Channel_1: TIM Channel 1
+  *     @arg TIM_Channel_2: TIM Channel 2
+  *     @arg TIM_Channel_3: TIM Channel 3
+  *     @arg TIM_Channel_4: TIM Channel 4
+  * @param  TIM_CCx: specifies the TIM Channel CCxE bit new state.
+  *   This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. 
+  * @retval None
+  */
+void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx)
+{
+  uint16_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+  assert_param(IS_TIM_CHANNEL(TIM_Channel));
+  assert_param(IS_TIM_CCX(TIM_CCx));
+
+  tmp = CCER_CCE_Set << TIM_Channel;
+
+  /* Reset the CCxE Bit */
+  TIMx->CCER &= (uint16_t)~ tmp;
+
+  /* Set or reset the CCxE Bit */ 
+  TIMx->CCER |=  (uint16_t)(TIM_CCx << TIM_Channel);
+}
+
+/**
+  * @brief  Enables or disables the TIM Capture Compare Channel xN.
+  * @param  TIMx: where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
+  * @param  TIM_Channel: specifies the TIM Channel
+  *   This parameter can be one of the following values:
+  *     @arg TIM_Channel_1: TIM Channel 1
+  *     @arg TIM_Channel_2: TIM Channel 2
+  *     @arg TIM_Channel_3: TIM Channel 3
+  * @param  TIM_CCxN: specifies the TIM Channel CCxNE bit new state.
+  *   This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. 
+  * @retval None
+  */
+void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN)
+{
+  uint16_t tmp = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST2_PERIPH(TIMx));
+  assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel));
+  assert_param(IS_TIM_CCXN(TIM_CCxN));
+
+  tmp = CCER_CCNE_Set << TIM_Channel;
+
+  /* Reset the CCxNE Bit */
+  TIMx->CCER &= (uint16_t) ~tmp;
+
+  /* Set or reset the CCxNE Bit */ 
+  TIMx->CCER |=  (uint16_t)(TIM_CCxN << TIM_Channel);
+}
+
+/**
+  * @brief  Selects the TIM Output Compare Mode.
+  * @note   This function disables the selected channel before changing the Output
+  *         Compare Mode.
+  *         User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions.
+  * @param  TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @param  TIM_Channel: specifies the TIM Channel
+  *   This parameter can be one of the following values:
+  *     @arg TIM_Channel_1: TIM Channel 1
+  *     @arg TIM_Channel_2: TIM Channel 2
+  *     @arg TIM_Channel_3: TIM Channel 3
+  *     @arg TIM_Channel_4: TIM Channel 4
+  * @param  TIM_OCMode: specifies the TIM Output Compare Mode.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OCMode_Timing
+  *     @arg TIM_OCMode_Active
+  *     @arg TIM_OCMode_Toggle
+  *     @arg TIM_OCMode_PWM1
+  *     @arg TIM_OCMode_PWM2
+  *     @arg TIM_ForcedAction_Active
+  *     @arg TIM_ForcedAction_InActive
+  * @retval None
+  */
+void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode)
+{
+  uint32_t tmp = 0;
+  uint16_t tmp1 = 0;
+
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+  assert_param(IS_TIM_CHANNEL(TIM_Channel));
+  assert_param(IS_TIM_OCM(TIM_OCMode));
+
+  tmp = (uint32_t) TIMx;
+  tmp += CCMR_Offset;
+
+  tmp1 = CCER_CCE_Set << (uint16_t)TIM_Channel;
+
+  /* Disable the Channel: Reset the CCxE Bit */
+  TIMx->CCER &= (uint16_t) ~tmp1;
+
+  if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3))
+  {
+    tmp += (TIM_Channel>>1);
+
+    /* Reset the OCxM bits in the CCMRx register */
+    *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC1M);
+   
+    /* Configure the OCxM bits in the CCMRx register */
+    *(__IO uint32_t *) tmp |= TIM_OCMode;
+  }
+  else
+  {
+    tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1;
+
+    /* Reset the OCxM bits in the CCMRx register */
+    *(__IO uint32_t *) tmp &= (uint32_t)~((uint32_t)TIM_CCMR1_OC2M);
+    
+    /* Configure the OCxM bits in the CCMRx register */
+    *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8);
+  }
+}
+
+/**
+  * @brief  Enables or Disables the TIMx Update event.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  NewState: new state of the TIMx UDIS bit
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Set the Update Disable Bit */
+    TIMx->CR1 |= TIM_CR1_UDIS;
+  }
+  else
+  {
+    /* Reset the Update Disable Bit */
+    TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_UDIS);
+  }
+}
+
+/**
+  * @brief  Configures the TIMx Update Request Interrupt source.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  TIM_UpdateSource: specifies the Update source.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_UpdateSource_Regular: Source of update is the counter overflow/underflow
+                                       or the setting of UG bit, or an update generation
+                                       through the slave mode controller.
+  *     @arg TIM_UpdateSource_Global: Source of update is counter overflow/underflow.
+  * @retval None
+  */
+void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource));
+  if (TIM_UpdateSource != TIM_UpdateSource_Global)
+  {
+    /* Set the URS Bit */
+    TIMx->CR1 |= TIM_CR1_URS;
+  }
+  else
+  {
+    /* Reset the URS Bit */
+    TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_URS);
+  }
+}
+
+/**
+  * @brief  Enables or disables the TIMx's Hall sensor interface.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  NewState: new state of the TIMx Hall sensor interface.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Set the TI1S Bit */
+    TIMx->CR2 |= TIM_CR2_TI1S;
+  }
+  else
+  {
+    /* Reset the TI1S Bit */
+    TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_TI1S);
+  }
+}
+
+/**
+  * @brief  Selects the TIMx's One Pulse Mode.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  TIM_OPMode: specifies the OPM Mode to be used.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_OPMode_Single
+  *     @arg TIM_OPMode_Repetitive
+  * @retval None
+  */
+void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_TIM_OPM_MODE(TIM_OPMode));
+  /* Reset the OPM Bit */
+  TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_OPM);
+  /* Configure the OPM Mode */
+  TIMx->CR1 |= TIM_OPMode;
+}
+
+/**
+  * @brief  Selects the TIMx Trigger Output Mode.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5, 6, 7, 8, 9, 12 or 15 to select the TIM peripheral.
+  * @param  TIM_TRGOSource: specifies the Trigger Output source.
+  *   This paramter can be one of the following values:
+  *
+  *  - For all TIMx
+  *     @arg TIM_TRGOSource_Reset:  The UG bit in the TIM_EGR register is used as the trigger output (TRGO).
+  *     @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output (TRGO).
+  *     @arg TIM_TRGOSource_Update: The update event is selected as the trigger output (TRGO).
+  *
+  *  - For all TIMx except TIM6 and TIM7
+  *     @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag
+  *                              is to be set, as soon as a capture or compare match occurs (TRGO).
+  *     @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output (TRGO).
+  *     @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output (TRGO).
+  *     @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output (TRGO).
+  *     @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output (TRGO).
+  *
+  * @retval None
+  */
+void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST7_PERIPH(TIMx));
+  assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource));
+  /* Reset the MMS Bits */
+  TIMx->CR2 &= (uint16_t)~((uint16_t)TIM_CR2_MMS);
+  /* Select the TRGO source */
+  TIMx->CR2 |=  TIM_TRGOSource;
+}
+
+/**
+  * @brief  Selects the TIMx Slave Mode.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+  * @param  TIM_SlaveMode: specifies the Timer Slave Mode.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes
+  *                               the counter and triggers an update of the registers.
+  *     @arg TIM_SlaveMode_Gated:     The counter clock is enabled when the trigger signal (TRGI) is high.
+  *     @arg TIM_SlaveMode_Trigger:   The counter starts at a rising edge of the trigger TRGI.
+  *     @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter.
+  * @retval None
+  */
+void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode));
+ /* Reset the SMS Bits */
+  TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_SMS);
+  /* Select the Slave Mode */
+  TIMx->SMCR |= TIM_SlaveMode;
+}
+
+/**
+  * @brief  Sets or Resets the TIMx Master/Slave Mode.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+  * @param  TIM_MasterSlaveMode: specifies the Timer Master Slave Mode.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer
+  *                                      and its slaves (through TRGO).
+  *     @arg TIM_MasterSlaveMode_Disable: No action
+  * @retval None
+  */
+void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode));
+  /* Reset the MSM Bit */
+  TIMx->SMCR &= (uint16_t)~((uint16_t)TIM_SMCR_MSM);
+  
+  /* Set or Reset the MSM Bit */
+  TIMx->SMCR |= TIM_MasterSlaveMode;
+}
+
+/**
+  * @brief  Sets the TIMx Counter Register value
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  Counter: specifies the Counter register new value.
+  * @retval None
+  */
+void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  /* Set the Counter Register value */
+  TIMx->CNT = Counter;
+}
+
+/**
+  * @brief  Sets the TIMx Autoreload Register value
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  Autoreload: specifies the Autoreload register new value.
+  * @retval None
+  */
+void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  /* Set the Autoreload Register value */
+  TIMx->ARR = Autoreload;
+}
+
+/**
+  * @brief  Sets the TIMx Capture Compare1 Register value
+  * @param  TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @param  Compare1: specifies the Capture Compare1 register new value.
+  * @retval None
+  */
+void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+  /* Set the Capture Compare1 Register value */
+  TIMx->CCR1 = Compare1;
+}
+
+/**
+  * @brief  Sets the TIMx Capture Compare2 Register value
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+  * @param  Compare2: specifies the Capture Compare2 register new value.
+  * @retval None
+  */
+void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  /* Set the Capture Compare2 Register value */
+  TIMx->CCR2 = Compare2;
+}
+
+/**
+  * @brief  Sets the TIMx Capture Compare3 Register value
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  Compare3: specifies the Capture Compare3 register new value.
+  * @retval None
+  */
+void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  /* Set the Capture Compare3 Register value */
+  TIMx->CCR3 = Compare3;
+}
+
+/**
+  * @brief  Sets the TIMx Capture Compare4 Register value
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  Compare4: specifies the Capture Compare4 register new value.
+  * @retval None
+  */
+void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  /* Set the Capture Compare4 Register value */
+  TIMx->CCR4 = Compare4;
+}
+
+/**
+  * @brief  Sets the TIMx Input Capture 1 prescaler.
+  * @param  TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @param  TIM_ICPSC: specifies the Input Capture1 prescaler new value.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICPSC_DIV1: no prescaler
+  *     @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+  *     @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+  *     @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+  * @retval None
+  */
+void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+  assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+  /* Reset the IC1PSC Bits */
+  TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC1PSC);
+  /* Set the IC1PSC value */
+  TIMx->CCMR1 |= TIM_ICPSC;
+}
+
+/**
+  * @brief  Sets the TIMx Input Capture 2 prescaler.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+  * @param  TIM_ICPSC: specifies the Input Capture2 prescaler new value.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICPSC_DIV1: no prescaler
+  *     @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+  *     @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+  *     @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+  * @retval None
+  */
+void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+  /* Reset the IC2PSC Bits */
+  TIMx->CCMR1 &= (uint16_t)~((uint16_t)TIM_CCMR1_IC2PSC);
+  /* Set the IC2PSC value */
+  TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8);
+}
+
+/**
+  * @brief  Sets the TIMx Input Capture 3 prescaler.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_ICPSC: specifies the Input Capture3 prescaler new value.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICPSC_DIV1: no prescaler
+  *     @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+  *     @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+  *     @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+  * @retval None
+  */
+void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+  /* Reset the IC3PSC Bits */
+  TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC3PSC);
+  /* Set the IC3PSC value */
+  TIMx->CCMR2 |= TIM_ICPSC;
+}
+
+/**
+  * @brief  Sets the TIMx Input Capture 4 prescaler.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_ICPSC: specifies the Input Capture4 prescaler new value.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICPSC_DIV1: no prescaler
+  *     @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+  *     @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+  *     @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+  * @retval None
+  */
+void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC)
+{  
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC));
+  /* Reset the IC4PSC Bits */
+  TIMx->CCMR2 &= (uint16_t)~((uint16_t)TIM_CCMR2_IC4PSC);
+  /* Set the IC4PSC value */
+  TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8);
+}
+
+/**
+  * @brief  Sets the TIMx Clock Division value.
+  * @param  TIMx: where x can be  1 to 17 except 6 and 7 to select 
+  *   the TIM peripheral.
+  * @param  TIM_CKD: specifies the clock division value.
+  *   This parameter can be one of the following value:
+  *     @arg TIM_CKD_DIV1: TDTS = Tck_tim
+  *     @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim
+  *     @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim
+  * @retval None
+  */
+void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+  assert_param(IS_TIM_CKD_DIV(TIM_CKD));
+  /* Reset the CKD Bits */
+  TIMx->CR1 &= (uint16_t)~((uint16_t)TIM_CR1_CKD);
+  /* Set the CKD value */
+  TIMx->CR1 |= TIM_CKD;
+}
+
+/**
+  * @brief  Gets the TIMx Input Capture 1 value.
+  * @param  TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @retval Capture Compare 1 Register value.
+  */
+uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST8_PERIPH(TIMx));
+  /* Get the Capture 1 Register value */
+  return TIMx->CCR1;
+}
+
+/**
+  * @brief  Gets the TIMx Input Capture 2 value.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+  * @retval Capture Compare 2 Register value.
+  */
+uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST6_PERIPH(TIMx));
+  /* Get the Capture 2 Register value */
+  return TIMx->CCR2;
+}
+
+/**
+  * @brief  Gets the TIMx Input Capture 3 value.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @retval Capture Compare 3 Register value.
+  */
+uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx)); 
+  /* Get the Capture 3 Register value */
+  return TIMx->CCR3;
+}
+
+/**
+  * @brief  Gets the TIMx Input Capture 4 value.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @retval Capture Compare 4 Register value.
+  */
+uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_LIST3_PERIPH(TIMx));
+  /* Get the Capture 4 Register value */
+  return TIMx->CCR4;
+}
+
+/**
+  * @brief  Gets the TIMx Counter value.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @retval Counter Register value.
+  */
+uint16_t TIM_GetCounter(TIM_TypeDef* TIMx)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  /* Get the Counter Register value */
+  return TIMx->CNT;
+}
+
+/**
+  * @brief  Gets the TIMx Prescaler value.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @retval Prescaler Register value.
+  */
+uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  /* Get the Prescaler Register value */
+  return TIMx->PSC;
+}
+
+/**
+  * @brief  Checks whether the specified TIM flag is set or not.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  TIM_FLAG: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_FLAG_Update: TIM update Flag
+  *     @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag
+  *     @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag
+  *     @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag
+  *     @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag
+  *     @arg TIM_FLAG_COM: TIM Commutation Flag
+  *     @arg TIM_FLAG_Trigger: TIM Trigger Flag
+  *     @arg TIM_FLAG_Break: TIM Break Flag
+  *     @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
+  *     @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
+  *     @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
+  *     @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
+  * @note
+  *   - TIM6 and TIM7 can have only one update flag. 
+  *   - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1,
+  *      TIM_FLAG_CC2 or TIM_FLAG_Trigger. 
+  *   - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1.   
+  *   - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15. 
+  *   - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.    
+  * @retval The new state of TIM_FLAG (SET or RESET).
+  */
+FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG)
+{ 
+  ITStatus bitstatus = RESET;  
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_TIM_GET_FLAG(TIM_FLAG));
+  
+  if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the TIMx's pending flags.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  TIM_FLAG: specifies the flag bit to clear.
+  *   This parameter can be any combination of the following values:
+  *     @arg TIM_FLAG_Update: TIM update Flag
+  *     @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag
+  *     @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag
+  *     @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag
+  *     @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag
+  *     @arg TIM_FLAG_COM: TIM Commutation Flag
+  *     @arg TIM_FLAG_Trigger: TIM Trigger Flag
+  *     @arg TIM_FLAG_Break: TIM Break Flag
+  *     @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag
+  *     @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag
+  *     @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag
+  *     @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag
+  * @note
+  *   - TIM6 and TIM7 can have only one update flag. 
+  *   - TIM9, TIM12 and TIM15 can have only TIM_FLAG_Update, TIM_FLAG_CC1,
+  *      TIM_FLAG_CC2 or TIM_FLAG_Trigger. 
+  *   - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_FLAG_Update or TIM_FLAG_CC1.   
+  *   - TIM_FLAG_Break is used only with TIM1, TIM8 and TIM15. 
+  *   - TIM_FLAG_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.   
+  * @retval None
+  */
+void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG)
+{  
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_TIM_CLEAR_FLAG(TIM_FLAG));
+   
+  /* Clear the flags */
+  TIMx->SR = (uint16_t)~TIM_FLAG;
+}
+
+/**
+  * @brief  Checks whether the TIM interrupt has occurred or not.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  TIM_IT: specifies the TIM interrupt source to check.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_IT_Update: TIM update Interrupt source
+  *     @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+  *     @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+  *     @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+  *     @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+  *     @arg TIM_IT_COM: TIM Commutation Interrupt source
+  *     @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+  *     @arg TIM_IT_Break: TIM Break Interrupt source
+  * @note
+  *   - TIM6 and TIM7 can generate only an update interrupt.
+  *   - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+  *      TIM_IT_CC2 or TIM_IT_Trigger. 
+  *   - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.   
+  *   - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. 
+  *   - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.  
+  * @retval The new state of the TIM_IT(SET or RESET).
+  */
+ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT)
+{
+  ITStatus bitstatus = RESET;  
+  uint16_t itstatus = 0x0, itenable = 0x0;
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_TIM_GET_IT(TIM_IT));
+   
+  itstatus = TIMx->SR & TIM_IT;
+  
+  itenable = TIMx->DIER & TIM_IT;
+  if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET))
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the TIMx's interrupt pending bits.
+  * @param  TIMx: where x can be 1 to 17 to select the TIM peripheral.
+  * @param  TIM_IT: specifies the pending bit to clear.
+  *   This parameter can be any combination of the following values:
+  *     @arg TIM_IT_Update: TIM1 update Interrupt source
+  *     @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source
+  *     @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source
+  *     @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source
+  *     @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source
+  *     @arg TIM_IT_COM: TIM Commutation Interrupt source
+  *     @arg TIM_IT_Trigger: TIM Trigger Interrupt source
+  *     @arg TIM_IT_Break: TIM Break Interrupt source
+  * @note
+  *   - TIM6 and TIM7 can generate only an update interrupt.
+  *   - TIM9, TIM12 and TIM15 can have only TIM_IT_Update, TIM_IT_CC1,
+  *      TIM_IT_CC2 or TIM_IT_Trigger. 
+  *   - TIM10, TIM11, TIM13, TIM14, TIM16 and TIM17 can have TIM_IT_Update or TIM_IT_CC1.   
+  *   - TIM_IT_Break is used only with TIM1, TIM8 and TIM15. 
+  *   - TIM_IT_COM is used only with TIM1, TIM8, TIM15, TIM16 and TIM17.    
+  * @retval None
+  */
+void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT)
+{
+  /* Check the parameters */
+  assert_param(IS_TIM_ALL_PERIPH(TIMx));
+  assert_param(IS_TIM_IT(TIM_IT));
+  /* Clear the IT pending Bit */
+  TIMx->SR = (uint16_t)~TIM_IT;
+}
+
+/**
+  * @brief  Configure the TI1 as Input.
+  * @param  TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICPolarity_Rising
+  *     @arg TIM_ICPolarity_Falling
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
+  *     @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
+  *     @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *   This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+                       uint16_t TIM_ICFilter)
+{
+  uint16_t tmpccmr1 = 0, tmpccer = 0;
+  /* Disable the Channel 1: Reset the CC1E Bit */
+  TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC1E);
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+  /* Select the Input and set the filter */
+  tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC1S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC1F)));
+  tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4));
+  
+  if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+     (TIMx == TIM4) ||(TIMx == TIM5))
+  {
+    /* Select the Polarity and set the CC1E Bit */
+    tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P));
+    tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E);
+  }
+  else
+  {
+    /* Select the Polarity and set the CC1E Bit */
+    tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC1P | TIM_CCER_CC1NP));
+    tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC1E);
+  }
+
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI2 as Input.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5, 8, 9, 12 or 15 to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICPolarity_Rising
+  *     @arg TIM_ICPolarity_Falling
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
+  *     @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
+  *     @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *   This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+                       uint16_t TIM_ICFilter)
+{
+  uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0;
+  /* Disable the Channel 2: Reset the CC2E Bit */
+  TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC2E);
+  tmpccmr1 = TIMx->CCMR1;
+  tmpccer = TIMx->CCER;
+  tmp = (uint16_t)(TIM_ICPolarity << 4);
+  /* Select the Input and set the filter */
+  tmpccmr1 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR1_CC2S)) & ((uint16_t)~((uint16_t)TIM_CCMR1_IC2F)));
+  tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12);
+  tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8);
+  
+  if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+     (TIMx == TIM4) ||(TIMx == TIM5))
+  {
+    /* Select the Polarity and set the CC2E Bit */
+    tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P));
+    tmpccer |=  (uint16_t)(tmp | (uint16_t)TIM_CCER_CC2E);
+  }
+  else
+  {
+    /* Select the Polarity and set the CC2E Bit */
+    tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC2P | TIM_CCER_CC2NP));
+    tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC2E);
+  }
+  
+  /* Write to TIMx CCMR1 and CCER registers */
+  TIMx->CCMR1 = tmpccmr1 ;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI3 as Input.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICPolarity_Rising
+  *     @arg TIM_ICPolarity_Falling
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
+  *     @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
+  *     @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *   This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+                       uint16_t TIM_ICFilter)
+{
+  uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0;
+  /* Disable the Channel 3: Reset the CC3E Bit */
+  TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC3E);
+  tmpccmr2 = TIMx->CCMR2;
+  tmpccer = TIMx->CCER;
+  tmp = (uint16_t)(TIM_ICPolarity << 8);
+  /* Select the Input and set the filter */
+  tmpccmr2 &= (uint16_t)(((uint16_t)~((uint16_t)TIM_CCMR2_CC3S)) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC3F)));
+  tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4));
+    
+  if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+     (TIMx == TIM4) ||(TIMx == TIM5))
+  {
+    /* Select the Polarity and set the CC3E Bit */
+    tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P));
+    tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC3E);
+  }
+  else
+  {
+    /* Select the Polarity and set the CC3E Bit */
+    tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC3NP));
+    tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC3E);
+  }
+  
+  /* Write to TIMx CCMR2 and CCER registers */
+  TIMx->CCMR2 = tmpccmr2;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @brief  Configure the TI4 as Input.
+  * @param  TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
+  * @param  TIM_ICPolarity : The Input Polarity.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICPolarity_Rising
+  *     @arg TIM_ICPolarity_Falling
+  * @param  TIM_ICSelection: specifies the input to be used.
+  *   This parameter can be one of the following values:
+  *     @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
+  *     @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
+  *     @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
+  * @param  TIM_ICFilter: Specifies the Input Capture Filter.
+  *   This parameter must be a value between 0x00 and 0x0F.
+  * @retval None
+  */
+static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection,
+                       uint16_t TIM_ICFilter)
+{
+  uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0;
+
+   /* Disable the Channel 4: Reset the CC4E Bit */
+  TIMx->CCER &= (uint16_t)~((uint16_t)TIM_CCER_CC4E);
+  tmpccmr2 = TIMx->CCMR2;
+  tmpccer = TIMx->CCER;
+  tmp = (uint16_t)(TIM_ICPolarity << 12);
+  /* Select the Input and set the filter */
+  tmpccmr2 &= (uint16_t)((uint16_t)(~(uint16_t)TIM_CCMR2_CC4S) & ((uint16_t)~((uint16_t)TIM_CCMR2_IC4F)));
+  tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8);
+  tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12);
+  
+  if((TIMx == TIM1) || (TIMx == TIM8) || (TIMx == TIM2) || (TIMx == TIM3) ||
+     (TIMx == TIM4) ||(TIMx == TIM5))
+  {
+    /* Select the Polarity and set the CC4E Bit */
+    tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC4P));
+    tmpccer |= (uint16_t)(tmp | (uint16_t)TIM_CCER_CC4E);
+  }
+  else
+  {
+    /* Select the Polarity and set the CC4E Bit */
+    tmpccer &= (uint16_t)~((uint16_t)(TIM_CCER_CC3P | TIM_CCER_CC4NP));
+    tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)TIM_CCER_CC4E);
+  }
+  /* Write to TIMx CCMR2 and CCER registers */
+  TIMx->CCMR2 = tmpccmr2;
+  TIMx->CCER = tmpccer;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_usart.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_usart.c
new file mode 100644
index 0000000000000000000000000000000000000000..a3f16f15ea60731c5b287983637e53f3c8f30681
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_usart.c
@@ -0,0 +1,1058 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_usart.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the USART firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_usart.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup USART 
+  * @brief USART driver modules
+  * @{
+  */
+
+/** @defgroup USART_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup USART_Private_Defines
+  * @{
+  */
+
+#define CR1_UE_Set                ((uint16_t)0x2000)  /*!< USART Enable Mask */
+#define CR1_UE_Reset              ((uint16_t)0xDFFF)  /*!< USART Disable Mask */
+
+#define CR1_WAKE_Mask             ((uint16_t)0xF7FF)  /*!< USART WakeUp Method Mask */
+
+#define CR1_RWU_Set               ((uint16_t)0x0002)  /*!< USART mute mode Enable Mask */
+#define CR1_RWU_Reset             ((uint16_t)0xFFFD)  /*!< USART mute mode Enable Mask */
+#define CR1_SBK_Set               ((uint16_t)0x0001)  /*!< USART Break Character send Mask */
+#define CR1_CLEAR_Mask            ((uint16_t)0xE9F3)  /*!< USART CR1 Mask */
+#define CR2_Address_Mask          ((uint16_t)0xFFF0)  /*!< USART address Mask */
+
+#define CR2_LINEN_Set              ((uint16_t)0x4000)  /*!< USART LIN Enable Mask */
+#define CR2_LINEN_Reset            ((uint16_t)0xBFFF)  /*!< USART LIN Disable Mask */
+
+#define CR2_LBDL_Mask             ((uint16_t)0xFFDF)  /*!< USART LIN Break detection Mask */
+#define CR2_STOP_CLEAR_Mask       ((uint16_t)0xCFFF)  /*!< USART CR2 STOP Bits Mask */
+#define CR2_CLOCK_CLEAR_Mask      ((uint16_t)0xF0FF)  /*!< USART CR2 Clock Mask */
+
+#define CR3_SCEN_Set              ((uint16_t)0x0020)  /*!< USART SC Enable Mask */
+#define CR3_SCEN_Reset            ((uint16_t)0xFFDF)  /*!< USART SC Disable Mask */
+
+#define CR3_NACK_Set              ((uint16_t)0x0010)  /*!< USART SC NACK Enable Mask */
+#define CR3_NACK_Reset            ((uint16_t)0xFFEF)  /*!< USART SC NACK Disable Mask */
+
+#define CR3_HDSEL_Set             ((uint16_t)0x0008)  /*!< USART Half-Duplex Enable Mask */
+#define CR3_HDSEL_Reset           ((uint16_t)0xFFF7)  /*!< USART Half-Duplex Disable Mask */
+
+#define CR3_IRLP_Mask             ((uint16_t)0xFFFB)  /*!< USART IrDA LowPower mode Mask */
+#define CR3_CLEAR_Mask            ((uint16_t)0xFCFF)  /*!< USART CR3 Mask */
+
+#define CR3_IREN_Set              ((uint16_t)0x0002)  /*!< USART IrDA Enable Mask */
+#define CR3_IREN_Reset            ((uint16_t)0xFFFD)  /*!< USART IrDA Disable Mask */
+#define GTPR_LSB_Mask             ((uint16_t)0x00FF)  /*!< Guard Time Register LSB Mask */
+#define GTPR_MSB_Mask             ((uint16_t)0xFF00)  /*!< Guard Time Register MSB Mask */
+#define IT_Mask                   ((uint16_t)0x001F)  /*!< USART Interrupt Mask */
+
+/* USART OverSampling-8 Mask */
+#define CR1_OVER8_Set             ((u16)0x8000)  /* USART OVER8 mode Enable Mask */
+#define CR1_OVER8_Reset           ((u16)0x7FFF)  /* USART OVER8 mode Disable Mask */
+
+/* USART One Bit Sampling Mask */
+#define CR3_ONEBITE_Set           ((u16)0x0800)  /* USART ONEBITE mode Enable Mask */
+#define CR3_ONEBITE_Reset         ((u16)0xF7FF)  /* USART ONEBITE mode Disable Mask */
+
+/**
+  * @}
+  */
+
+/** @defgroup USART_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup USART_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup USART_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup USART_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the USARTx peripheral registers to their default reset values.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values: 
+  *      USART1, USART2, USART3, UART4 or UART5.
+  * @retval None
+  */
+void USART_DeInit(USART_TypeDef* USARTx)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+
+  if (USARTx == USART1)
+  {
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE);
+    RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE);
+  }
+  else if (USARTx == USART2)
+  {
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE);
+  }
+  else if (USARTx == USART3)
+  {
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE);
+  }    
+  else if (USARTx == UART4)
+  {
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE);
+    RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE);
+  }    
+  else
+  {
+    if (USARTx == UART5)
+    { 
+      RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE);
+      RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE);
+    }
+  }
+}
+
+/**
+  * @brief  Initializes the USARTx peripheral according to the specified
+  *         parameters in the USART_InitStruct .
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_InitStruct: pointer to a USART_InitTypeDef structure
+  *         that contains the configuration information for the specified USART 
+  *         peripheral.
+  * @retval None
+  */
+void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct)
+{
+  uint32_t tmpreg = 0x00, apbclock = 0x00;
+  uint32_t integerdivider = 0x00;
+  uint32_t fractionaldivider = 0x00;
+  uint32_t usartxbase = 0;
+  RCC_ClocksTypeDef RCC_ClocksStatus;
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate));  
+  assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength));
+  assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits));
+  assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity));
+  assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode));
+  assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl));
+  /* The hardware flow control is available only for USART1, USART2 and USART3 */
+  if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None)
+  {
+    assert_param(IS_USART_123_PERIPH(USARTx));
+  }
+
+  usartxbase = (uint32_t)USARTx;
+
+/*---------------------------- USART CR2 Configuration -----------------------*/
+  tmpreg = USARTx->CR2;
+  /* Clear STOP[13:12] bits */
+  tmpreg &= CR2_STOP_CLEAR_Mask;
+  /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/
+  /* Set STOP[13:12] bits according to USART_StopBits value */
+  tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits;
+  
+  /* Write to USART CR2 */
+  USARTx->CR2 = (uint16_t)tmpreg;
+
+/*---------------------------- USART CR1 Configuration -----------------------*/
+  tmpreg = USARTx->CR1;
+  /* Clear M, PCE, PS, TE and RE bits */
+  tmpreg &= CR1_CLEAR_Mask;
+  /* Configure the USART Word Length, Parity and mode ----------------------- */
+  /* Set the M bits according to USART_WordLength value */
+  /* Set PCE and PS bits according to USART_Parity value */
+  /* Set TE and RE bits according to USART_Mode value */
+  tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity |
+            USART_InitStruct->USART_Mode;
+  /* Write to USART CR1 */
+  USARTx->CR1 = (uint16_t)tmpreg;
+
+/*---------------------------- USART CR3 Configuration -----------------------*/  
+  tmpreg = USARTx->CR3;
+  /* Clear CTSE and RTSE bits */
+  tmpreg &= CR3_CLEAR_Mask;
+  /* Configure the USART HFC -------------------------------------------------*/
+  /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */
+  tmpreg |= USART_InitStruct->USART_HardwareFlowControl;
+  /* Write to USART CR3 */
+  USARTx->CR3 = (uint16_t)tmpreg;
+
+/*---------------------------- USART BRR Configuration -----------------------*/
+  /* Configure the USART Baud Rate -------------------------------------------*/
+  RCC_GetClocksFreq(&RCC_ClocksStatus);
+  if (usartxbase == USART1_BASE)
+  {
+    apbclock = RCC_ClocksStatus.PCLK2_Frequency;
+  }
+  else
+  {
+    apbclock = RCC_ClocksStatus.PCLK1_Frequency;
+  }
+  
+  /* Determine the integer part */
+  if ((USARTx->CR1 & CR1_OVER8_Set) != 0)
+  {
+    /* Integer part computing in case Oversampling mode is 8 Samples */
+    integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate)));    
+  }
+  else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */
+  {
+    /* Integer part computing in case Oversampling mode is 16 Samples */
+    integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate)));    
+  }
+  tmpreg = (integerdivider / 100) << 4;
+
+  /* Determine the fractional part */
+  fractionaldivider = integerdivider - (100 * (tmpreg >> 4));
+
+  /* Implement the fractional part in the register */
+  if ((USARTx->CR1 & CR1_OVER8_Set) != 0)
+  {
+    tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07);
+  }
+  else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */
+  {
+    tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F);
+  }
+  
+  /* Write to USART BRR */
+  USARTx->BRR = (uint16_t)tmpreg;
+}
+
+/**
+  * @brief  Fills each USART_InitStruct member with its default value.
+  * @param  USART_InitStruct: pointer to a USART_InitTypeDef structure
+  *         which will be initialized.
+  * @retval None
+  */
+void USART_StructInit(USART_InitTypeDef* USART_InitStruct)
+{
+  /* USART_InitStruct members default value */
+  USART_InitStruct->USART_BaudRate = 9600;
+  USART_InitStruct->USART_WordLength = USART_WordLength_8b;
+  USART_InitStruct->USART_StopBits = USART_StopBits_1;
+  USART_InitStruct->USART_Parity = USART_Parity_No ;
+  USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+  USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None;  
+}
+
+/**
+  * @brief  Initializes the USARTx peripheral Clock according to the 
+  *          specified parameters in the USART_ClockInitStruct .
+  * @param  USARTx: where x can be 1, 2, 3 to select the USART peripheral.
+  * @param  USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
+  *         structure that contains the configuration information for the specified 
+  *         USART peripheral.  
+  * @note The Smart Card and Synchronous modes are not available for UART4 and UART5.
+  * @retval None
+  */
+void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct)
+{
+  uint32_t tmpreg = 0x00;
+  /* Check the parameters */
+  assert_param(IS_USART_123_PERIPH(USARTx));
+  assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock));
+  assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL));
+  assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA));
+  assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit));
+  
+/*---------------------------- USART CR2 Configuration -----------------------*/
+  tmpreg = USARTx->CR2;
+  /* Clear CLKEN, CPOL, CPHA and LBCL bits */
+  tmpreg &= CR2_CLOCK_CLEAR_Mask;
+  /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/
+  /* Set CLKEN bit according to USART_Clock value */
+  /* Set CPOL bit according to USART_CPOL value */
+  /* Set CPHA bit according to USART_CPHA value */
+  /* Set LBCL bit according to USART_LastBit value */
+  tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | 
+                 USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit;
+  /* Write to USART CR2 */
+  USARTx->CR2 = (uint16_t)tmpreg;
+}
+
+/**
+  * @brief  Fills each USART_ClockInitStruct member with its default value.
+  * @param  USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef
+  *         structure which will be initialized.
+  * @retval None
+  */
+void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct)
+{
+  /* USART_ClockInitStruct members default value */
+  USART_ClockInitStruct->USART_Clock = USART_Clock_Disable;
+  USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low;
+  USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge;
+  USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable;
+}
+
+/**
+  * @brief  Enables or disables the specified USART peripheral.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *         This parameter can be one of the following values:
+  *           USART1, USART2, USART3, UART4 or UART5.
+  * @param  NewState: new state of the USARTx peripheral.
+  *         This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the selected USART by setting the UE bit in the CR1 register */
+    USARTx->CR1 |= CR1_UE_Set;
+  }
+  else
+  {
+    /* Disable the selected USART by clearing the UE bit in the CR1 register */
+    USARTx->CR1 &= CR1_UE_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the specified USART interrupts.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_IT: specifies the USART interrupt sources to be enabled or disabled.
+  *   This parameter can be one of the following values:
+  *     @arg USART_IT_CTS:  CTS change interrupt (not available for UART4 and UART5)
+  *     @arg USART_IT_LBD:  LIN Break detection interrupt
+  *     @arg USART_IT_TXE:  Transmit Data Register empty interrupt
+  *     @arg USART_IT_TC:   Transmission complete interrupt
+  *     @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *     @arg USART_IT_IDLE: Idle line detection interrupt
+  *     @arg USART_IT_PE:   Parity Error interrupt
+  *     @arg USART_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @param  NewState: new state of the specified USARTx interrupts.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState)
+{
+  uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00;
+  uint32_t usartxbase = 0x00;
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_CONFIG_IT(USART_IT));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  /* The CTS interrupt is not available for UART4 and UART5 */
+  if (USART_IT == USART_IT_CTS)
+  {
+    assert_param(IS_USART_123_PERIPH(USARTx));
+  }   
+  
+  usartxbase = (uint32_t)USARTx;
+
+  /* Get the USART register index */
+  usartreg = (((uint8_t)USART_IT) >> 0x05);
+
+  /* Get the interrupt position */
+  itpos = USART_IT & IT_Mask;
+  itmask = (((uint32_t)0x01) << itpos);
+    
+  if (usartreg == 0x01) /* The IT is in CR1 register */
+  {
+    usartxbase += 0x0C;
+  }
+  else if (usartreg == 0x02) /* The IT is in CR2 register */
+  {
+    usartxbase += 0x10;
+  }
+  else /* The IT is in CR3 register */
+  {
+    usartxbase += 0x14; 
+  }
+  if (NewState != DISABLE)
+  {
+    *(__IO uint32_t*)usartxbase  |= itmask;
+  }
+  else
+  {
+    *(__IO uint32_t*)usartxbase &= ~itmask;
+  }
+}
+
+/**
+  * @brief  Enables or disables the USART’s DMA interface.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_DMAReq: specifies the DMA request.
+  *   This parameter can be any combination of the following values:
+  *     @arg USART_DMAReq_Tx: USART DMA transmit request
+  *     @arg USART_DMAReq_Rx: USART DMA receive request
+  * @param  NewState: new state of the DMA Request sources.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @note The DMA mode is not available for UART5 except in the STM32
+  *       High density value line devices(STM32F10X_HD_VL).  
+  * @retval None
+  */
+void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_DMAREQ(USART_DMAReq));  
+  assert_param(IS_FUNCTIONAL_STATE(NewState)); 
+  if (NewState != DISABLE)
+  {
+    /* Enable the DMA transfer for selected requests by setting the DMAT and/or
+       DMAR bits in the USART CR3 register */
+    USARTx->CR3 |= USART_DMAReq;
+  }
+  else
+  {
+    /* Disable the DMA transfer for selected requests by clearing the DMAT and/or
+       DMAR bits in the USART CR3 register */
+    USARTx->CR3 &= (uint16_t)~USART_DMAReq;
+  }
+}
+
+/**
+  * @brief  Sets the address of the USART node.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_Address: Indicates the address of the USART node.
+  * @retval None
+  */
+void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_ADDRESS(USART_Address)); 
+    
+  /* Clear the USART address */
+  USARTx->CR2 &= CR2_Address_Mask;
+  /* Set the USART address node */
+  USARTx->CR2 |= USART_Address;
+}
+
+/**
+  * @brief  Selects the USART WakeUp method.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_WakeUp: specifies the USART wakeup method.
+  *   This parameter can be one of the following values:
+  *     @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection
+  *     @arg USART_WakeUp_AddressMark: WakeUp by an address mark
+  * @retval None
+  */
+void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_WAKEUP(USART_WakeUp));
+  
+  USARTx->CR1 &= CR1_WAKE_Mask;
+  USARTx->CR1 |= USART_WakeUp;
+}
+
+/**
+  * @brief  Determines if the USART is in mute mode or not.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  NewState: new state of the USART mute mode.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState)); 
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the USART mute mode  by setting the RWU bit in the CR1 register */
+    USARTx->CR1 |= CR1_RWU_Set;
+  }
+  else
+  {
+    /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
+    USARTx->CR1 &= CR1_RWU_Reset;
+  }
+}
+
+/**
+  * @brief  Sets the USART LIN Break detection length.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_LINBreakDetectLength: specifies the LIN break detection length.
+  *   This parameter can be one of the following values:
+  *     @arg USART_LINBreakDetectLength_10b: 10-bit break detection
+  *     @arg USART_LINBreakDetectLength_11b: 11-bit break detection
+  * @retval None
+  */
+void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength));
+  
+  USARTx->CR2 &= CR2_LBDL_Mask;
+  USARTx->CR2 |= USART_LINBreakDetectLength;  
+}
+
+/**
+  * @brief  Enables or disables the USART’s LIN mode.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  NewState: new state of the USART LIN mode.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
+    USARTx->CR2 |= CR2_LINEN_Set;
+  }
+  else
+  {
+    /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */
+    USARTx->CR2 &= CR2_LINEN_Reset;
+  }
+}
+
+/**
+  * @brief  Transmits single data through the USARTx peripheral.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  Data: the data to transmit.
+  * @retval None
+  */
+void USART_SendData(USART_TypeDef* USARTx, uint16_t Data)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_DATA(Data)); 
+    
+  /* Transmit Data */
+  USARTx->DR = (Data & (uint16_t)0x01FF);
+}
+
+/**
+  * @brief  Returns the most recent received data by the USARTx peripheral.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @retval The received data.
+  */
+uint16_t USART_ReceiveData(USART_TypeDef* USARTx)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  
+  /* Receive Data */
+  return (uint16_t)(USARTx->DR & (uint16_t)0x01FF);
+}
+
+/**
+  * @brief  Transmits break characters.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @retval None
+  */
+void USART_SendBreak(USART_TypeDef* USARTx)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  
+  /* Send break characters */
+  USARTx->CR1 |= CR1_SBK_Set;
+}
+
+/**
+  * @brief  Sets the specified USART guard time.
+  * @param  USARTx: where x can be 1, 2 or 3 to select the USART peripheral.
+  * @param  USART_GuardTime: specifies the guard time.
+  * @note The guard time bits are not available for UART4 and UART5.   
+  * @retval None
+  */
+void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime)
+{    
+  /* Check the parameters */
+  assert_param(IS_USART_123_PERIPH(USARTx));
+  
+  /* Clear the USART Guard time */
+  USARTx->GTPR &= GTPR_LSB_Mask;
+  /* Set the USART guard time */
+  USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08);
+}
+
+/**
+  * @brief  Sets the system clock prescaler.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_Prescaler: specifies the prescaler clock.  
+  * @note   The function is used for IrDA mode with UART4 and UART5.
+  * @retval None
+  */
+void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler)
+{ 
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  
+  /* Clear the USART prescaler */
+  USARTx->GTPR &= GTPR_MSB_Mask;
+  /* Set the USART prescaler */
+  USARTx->GTPR |= USART_Prescaler;
+}
+
+/**
+  * @brief  Enables or disables the USART’s Smart Card mode.
+  * @param  USARTx: where x can be 1, 2 or 3 to select the USART peripheral.
+  * @param  NewState: new state of the Smart Card mode.
+  *   This parameter can be: ENABLE or DISABLE.     
+  * @note The Smart Card mode is not available for UART4 and UART5. 
+  * @retval None
+  */
+void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_123_PERIPH(USARTx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the SC mode by setting the SCEN bit in the CR3 register */
+    USARTx->CR3 |= CR3_SCEN_Set;
+  }
+  else
+  {
+    /* Disable the SC mode by clearing the SCEN bit in the CR3 register */
+    USARTx->CR3 &= CR3_SCEN_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables NACK transmission.
+  * @param  USARTx: where x can be 1, 2 or 3 to select the USART peripheral. 
+  * @param  NewState: new state of the NACK transmission.
+  *   This parameter can be: ENABLE or DISABLE.  
+  * @note The Smart Card mode is not available for UART4 and UART5.
+  * @retval None
+  */
+void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_123_PERIPH(USARTx));  
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  if (NewState != DISABLE)
+  {
+    /* Enable the NACK transmission by setting the NACK bit in the CR3 register */
+    USARTx->CR3 |= CR3_NACK_Set;
+  }
+  else
+  {
+    /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */
+    USARTx->CR3 &= CR3_NACK_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the USART’s Half Duplex communication.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  NewState: new state of the USART Communication.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
+    USARTx->CR3 |= CR3_HDSEL_Set;
+  }
+  else
+  {
+    /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */
+    USARTx->CR3 &= CR3_HDSEL_Reset;
+  }
+}
+
+
+/**
+  * @brief  Enables or disables the USART's 8x oversampling mode.
+  * @param  USARTx: Select the USART or the UART peripheral.
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  NewState: new state of the USART one bit sampling method.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @note
+  *     This function has to be called before calling USART_Init()
+  *     function in order to have correct baudrate Divider value.   
+  * @retval None
+  */
+void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */
+    USARTx->CR1 |= CR1_OVER8_Set;
+  }
+  else
+  {
+    /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */
+    USARTx->CR1 &= CR1_OVER8_Reset;
+  }
+}
+
+/**
+  * @brief  Enables or disables the USART's one bit sampling method.
+  * @param  USARTx: Select the USART or the UART peripheral.
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  NewState: new state of the USART one bit sampling method.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+  
+  if (NewState != DISABLE)
+  {
+    /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */
+    USARTx->CR3 |= CR3_ONEBITE_Set;
+  }
+  else
+  {
+    /* Disable tthe one bit method by clearing the ONEBITE bit in the CR3 register */
+    USARTx->CR3 &= CR3_ONEBITE_Reset;
+  }
+}
+
+/**
+  * @brief  Configures the USART's IrDA interface.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_IrDAMode: specifies the IrDA mode.
+  *   This parameter can be one of the following values:
+  *     @arg USART_IrDAMode_LowPower
+  *     @arg USART_IrDAMode_Normal
+  * @retval None
+  */
+void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_IRDA_MODE(USART_IrDAMode));
+    
+  USARTx->CR3 &= CR3_IRLP_Mask;
+  USARTx->CR3 |= USART_IrDAMode;
+}
+
+/**
+  * @brief  Enables or disables the USART's IrDA interface.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  NewState: new state of the IrDA mode.
+  *   This parameter can be: ENABLE or DISABLE.
+  * @retval None
+  */
+void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+    
+  if (NewState != DISABLE)
+  {
+    /* Enable the IrDA mode by setting the IREN bit in the CR3 register */
+    USARTx->CR3 |= CR3_IREN_Set;
+  }
+  else
+  {
+    /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */
+    USARTx->CR3 &= CR3_IREN_Reset;
+  }
+}
+
+/**
+  * @brief  Checks whether the specified USART flag is set or not.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_FLAG: specifies the flag to check.
+  *   This parameter can be one of the following values:
+  *     @arg USART_FLAG_CTS:  CTS Change flag (not available for UART4 and UART5)
+  *     @arg USART_FLAG_LBD:  LIN Break detection flag
+  *     @arg USART_FLAG_TXE:  Transmit data register empty flag
+  *     @arg USART_FLAG_TC:   Transmission Complete flag
+  *     @arg USART_FLAG_RXNE: Receive data register not empty flag
+  *     @arg USART_FLAG_IDLE: Idle Line detection flag
+  *     @arg USART_FLAG_ORE:  OverRun Error flag
+  *     @arg USART_FLAG_NE:   Noise Error flag
+  *     @arg USART_FLAG_FE:   Framing Error flag
+  *     @arg USART_FLAG_PE:   Parity Error flag
+  * @retval The new state of USART_FLAG (SET or RESET).
+  */
+FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG)
+{
+  FlagStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_FLAG(USART_FLAG));
+  /* The CTS flag is not available for UART4 and UART5 */
+  if (USART_FLAG == USART_FLAG_CTS)
+  {
+    assert_param(IS_USART_123_PERIPH(USARTx));
+  }  
+  
+  if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @brief  Clears the USARTx's pending flags.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_FLAG: specifies the flag to clear.
+  *   This parameter can be any combination of the following values:
+  *     @arg USART_FLAG_CTS:  CTS Change flag (not available for UART4 and UART5).
+  *     @arg USART_FLAG_LBD:  LIN Break detection flag.
+  *     @arg USART_FLAG_TC:   Transmission Complete flag.
+  *     @arg USART_FLAG_RXNE: Receive data register not empty flag.
+  *   
+  * @note
+  *   - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun 
+  *     error) and IDLE (Idle line detected) flags are cleared by software 
+  *     sequence: a read operation to USART_SR register (USART_GetFlagStatus()) 
+  *     followed by a read operation to USART_DR register (USART_ReceiveData()).
+  *   - RXNE flag can be also cleared by a read to the USART_DR register 
+  *     (USART_ReceiveData()).
+  *   - TC flag can be also cleared by software sequence: a read operation to 
+  *     USART_SR register (USART_GetFlagStatus()) followed by a write operation
+  *     to USART_DR register (USART_SendData()).
+  *   - TXE flag is cleared only by a write to the USART_DR register 
+  *     (USART_SendData()).
+  * @retval None
+  */
+void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG)
+{
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_CLEAR_FLAG(USART_FLAG));
+  /* The CTS flag is not available for UART4 and UART5 */
+  if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS)
+  {
+    assert_param(IS_USART_123_PERIPH(USARTx));
+  } 
+   
+  USARTx->SR = (uint16_t)~USART_FLAG;
+}
+
+/**
+  * @brief  Checks whether the specified USART interrupt has occurred or not.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_IT: specifies the USART interrupt source to check.
+  *   This parameter can be one of the following values:
+  *     @arg USART_IT_CTS:  CTS change interrupt (not available for UART4 and UART5)
+  *     @arg USART_IT_LBD:  LIN Break detection interrupt
+  *     @arg USART_IT_TXE:  Tansmit Data Register empty interrupt
+  *     @arg USART_IT_TC:   Transmission complete interrupt
+  *     @arg USART_IT_RXNE: Receive Data register not empty interrupt
+  *     @arg USART_IT_IDLE: Idle line detection interrupt
+  *     @arg USART_IT_ORE:  OverRun Error interrupt
+  *     @arg USART_IT_NE:   Noise Error interrupt
+  *     @arg USART_IT_FE:   Framing Error interrupt
+  *     @arg USART_IT_PE:   Parity Error interrupt
+  * @retval The new state of USART_IT (SET or RESET).
+  */
+ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT)
+{
+  uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00;
+  ITStatus bitstatus = RESET;
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_GET_IT(USART_IT));
+  /* The CTS interrupt is not available for UART4 and UART5 */ 
+  if (USART_IT == USART_IT_CTS)
+  {
+    assert_param(IS_USART_123_PERIPH(USARTx));
+  }   
+  
+  /* Get the USART register index */
+  usartreg = (((uint8_t)USART_IT) >> 0x05);
+  /* Get the interrupt position */
+  itmask = USART_IT & IT_Mask;
+  itmask = (uint32_t)0x01 << itmask;
+  
+  if (usartreg == 0x01) /* The IT  is in CR1 register */
+  {
+    itmask &= USARTx->CR1;
+  }
+  else if (usartreg == 0x02) /* The IT  is in CR2 register */
+  {
+    itmask &= USARTx->CR2;
+  }
+  else /* The IT  is in CR3 register */
+  {
+    itmask &= USARTx->CR3;
+  }
+  
+  bitpos = USART_IT >> 0x08;
+  bitpos = (uint32_t)0x01 << bitpos;
+  bitpos &= USARTx->SR;
+  if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET))
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  
+  return bitstatus;  
+}
+
+/**
+  * @brief  Clears the USARTx's interrupt pending bits.
+  * @param  USARTx: Select the USART or the UART peripheral. 
+  *   This parameter can be one of the following values:
+  *   USART1, USART2, USART3, UART4 or UART5.
+  * @param  USART_IT: specifies the interrupt pending bit to clear.
+  *   This parameter can be one of the following values:
+  *     @arg USART_IT_CTS:  CTS change interrupt (not available for UART4 and UART5)
+  *     @arg USART_IT_LBD:  LIN Break detection interrupt
+  *     @arg USART_IT_TC:   Transmission complete interrupt. 
+  *     @arg USART_IT_RXNE: Receive Data register not empty interrupt.
+  *   
+  * @note
+  *   - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun 
+  *     error) and IDLE (Idle line detected) pending bits are cleared by 
+  *     software sequence: a read operation to USART_SR register 
+  *     (USART_GetITStatus()) followed by a read operation to USART_DR register 
+  *     (USART_ReceiveData()).
+  *   - RXNE pending bit can be also cleared by a read to the USART_DR register 
+  *     (USART_ReceiveData()).
+  *   - TC pending bit can be also cleared by software sequence: a read 
+  *     operation to USART_SR register (USART_GetITStatus()) followed by a write 
+  *     operation to USART_DR register (USART_SendData()).
+  *   - TXE pending bit is cleared only by a write to the USART_DR register 
+  *     (USART_SendData()).
+  * @retval None
+  */
+void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT)
+{
+  uint16_t bitpos = 0x00, itmask = 0x00;
+  /* Check the parameters */
+  assert_param(IS_USART_ALL_PERIPH(USARTx));
+  assert_param(IS_USART_CLEAR_IT(USART_IT));
+  /* The CTS interrupt is not available for UART4 and UART5 */
+  if (USART_IT == USART_IT_CTS)
+  {
+    assert_param(IS_USART_123_PERIPH(USARTx));
+  }   
+  
+  bitpos = USART_IT >> 0x08;
+  itmask = ((uint16_t)0x01 << (uint16_t)bitpos);
+  USARTx->SR = (uint16_t)~itmask;
+}
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_wwdg.c b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_wwdg.c
new file mode 100644
index 0000000000000000000000000000000000000000..77a7ce517d5c4e42ee7fa752e161ae0c110a78e3
--- /dev/null
+++ b/Program/XLLC/STM32F10x_FWLib/src/stm32f10x_wwdg.c
@@ -0,0 +1,224 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x_wwdg.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   This file provides all the WWDG firmware functions.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_wwdg.h"
+#include "stm32f10x_rcc.h"
+
+/** @addtogroup STM32F10x_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup WWDG 
+  * @brief WWDG driver modules
+  * @{
+  */
+
+/** @defgroup WWDG_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Private_Defines
+  * @{
+  */
+
+/* ----------- WWDG registers bit address in the alias region ----------- */
+#define WWDG_OFFSET       (WWDG_BASE - PERIPH_BASE)
+
+/* Alias word address of EWI bit */
+#define CFR_OFFSET        (WWDG_OFFSET + 0x04)
+#define EWI_BitNumber     0x09
+#define CFR_EWI_BB        (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4))
+
+/* --------------------- WWDG registers bit mask ------------------------ */
+
+/* CR register bit mask */
+#define CR_WDGA_Set       ((uint32_t)0x00000080)
+
+/* CFR register bit mask */
+#define CFR_WDGTB_Mask    ((uint32_t)0xFFFFFE7F)
+#define CFR_W_Mask        ((uint32_t)0xFFFFFF80)
+#define BIT_Mask          ((uint8_t)0x7F)
+
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Private_Variables
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Private_FunctionPrototypes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @defgroup WWDG_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Deinitializes the WWDG peripheral registers to their default reset values.
+  * @param  None
+  * @retval None
+  */
+void WWDG_DeInit(void)
+{
+  RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE);
+  RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE);
+}
+
+/**
+  * @brief  Sets the WWDG Prescaler.
+  * @param  WWDG_Prescaler: specifies the WWDG Prescaler.
+  *   This parameter can be one of the following values:
+  *     @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1
+  *     @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2
+  *     @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4
+  *     @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8
+  * @retval None
+  */
+void WWDG_SetPrescaler(uint32_t WWDG_Prescaler)
+{
+  uint32_t tmpreg = 0;
+  /* Check the parameters */
+  assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler));
+  /* Clear WDGTB[1:0] bits */
+  tmpreg = WWDG->CFR & CFR_WDGTB_Mask;
+  /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */
+  tmpreg |= WWDG_Prescaler;
+  /* Store the new value */
+  WWDG->CFR = tmpreg;
+}
+
+/**
+  * @brief  Sets the WWDG window value.
+  * @param  WindowValue: specifies the window value to be compared to the downcounter.
+  *   This parameter value must be lower than 0x80.
+  * @retval None
+  */
+void WWDG_SetWindowValue(uint8_t WindowValue)
+{
+  __IO uint32_t tmpreg = 0;
+
+  /* Check the parameters */
+  assert_param(IS_WWDG_WINDOW_VALUE(WindowValue));
+  /* Clear W[6:0] bits */
+
+  tmpreg = WWDG->CFR & CFR_W_Mask;
+
+  /* Set W[6:0] bits according to WindowValue value */
+  tmpreg |= WindowValue & (uint32_t) BIT_Mask;
+
+  /* Store the new value */
+  WWDG->CFR = tmpreg;
+}
+
+/**
+  * @brief  Enables the WWDG Early Wakeup interrupt(EWI).
+  * @param  None
+  * @retval None
+  */
+void WWDG_EnableIT(void)
+{
+  *(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE;
+}
+
+/**
+  * @brief  Sets the WWDG counter value.
+  * @param  Counter: specifies the watchdog counter value.
+  *   This parameter must be a number between 0x40 and 0x7F.
+  * @retval None
+  */
+void WWDG_SetCounter(uint8_t Counter)
+{
+  /* Check the parameters */
+  assert_param(IS_WWDG_COUNTER(Counter));
+  /* Write to T[6:0] bits to configure the counter value, no need to do
+     a read-modify-write; writing a 0 to WDGA bit does nothing */
+  WWDG->CR = Counter & BIT_Mask;
+}
+
+/**
+  * @brief  Enables WWDG and load the counter value.                  
+  * @param  Counter: specifies the watchdog counter value.
+  *   This parameter must be a number between 0x40 and 0x7F.
+  * @retval None
+  */
+void WWDG_Enable(uint8_t Counter)
+{
+  /* Check the parameters */
+  assert_param(IS_WWDG_COUNTER(Counter));
+  WWDG->CR = CR_WDGA_Set | Counter;
+}
+
+/**
+  * @brief  Checks whether the Early Wakeup interrupt flag is set or not.
+  * @param  None
+  * @retval The new state of the Early Wakeup interrupt flag (SET or RESET)
+  */
+FlagStatus WWDG_GetFlagStatus(void)
+{
+  return (FlagStatus)(WWDG->SR);
+}
+
+/**
+  * @brief  Clears Early Wakeup interrupt flag.
+  * @param  None
+  * @retval None
+  */
+void WWDG_ClearFlag(void)
+{
+  WWDG->SR = (uint32_t)RESET;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/SYSTEM/sys/sys.c b/Program/XLLC/SYSTEM/sys/sys.c
new file mode 100644
index 0000000000000000000000000000000000000000..c2dcdc2baeff8ea60d0683cddf1ac5d471a0175b
--- /dev/null
+++ b/Program/XLLC/SYSTEM/sys/sys.c
@@ -0,0 +1,35 @@
+#include "sys.h"
+
+#if __SUPPORT_FREERTOS
+#include "FreeRTOS.h"
+#include "task.h"
+
+extern void xPortSysTickHandler(void);
+
+void SysTick_Handler(void)
+{	
+    if(xTaskGetSchedulerState()!=taskSCHEDULER_NOT_STARTED)//ϵͳÒѾ­ÔËÐÐ
+    {
+        xPortSysTickHandler();	
+    }
+}
+#endif
+
+void delay_us(u32 us)
+{
+	uint32_t i;
+	SysTick_Config(72);
+	for(i=0; iCTRL) & (1<<16)));
+	SysTick->CTRL &= ~SysTick_CTRL_ENABLE_Msk;
+}
+
+void delay_ms(u32 ms)
+{
+	uint32_t i;
+	SysTick_Config(72000);
+	for(i=0; iCTRL) & (1<<16)));
+	SysTick->CTRL &= ~SysTick_CTRL_ENABLE_Msk;
+}
+
diff --git a/Program/XLLC/SYSTEM/sys/sys.h b/Program/XLLC/SYSTEM/sys/sys.h
new file mode 100644
index 0000000000000000000000000000000000000000..af701f86b3c258a4aec42ad4f963dba3b77a4907
--- /dev/null
+++ b/Program/XLLC/SYSTEM/sys/sys.h
@@ -0,0 +1,56 @@
+/**
+	*
+	*	±àд£ºRagingWaves
+	*
+	*	±àдÈÕÆÚ£º2021/3/8
+	*
+	*/
+
+#ifndef __SYS_H 
+#define __SYS_H
+
+#define __SUPPORT_FREERTOS		1
+
+#include "stm32f10x.h"
+
+//IO¿ÚµØÖ·Ó³Éä
+#define GPIOA_ODR_Addr (GPIOA_BASE + 0x0C) //0x4001080C
+#define GPIOB_ODR_Addr (GPIOB_BASE + 0x0C) //0x40010C0C
+#define GPIOC_ODR_Addr (GPIOC_BASE + 0x0C) //0x4001100C
+#define GPIOD_ODR_Addr (GPIOD_BASE + 0x0C) //0x4001140C
+#define GPIOE_ODR_Addr (GPIOE_BASE + 0x0C) //0x4001180C
+#define GPIOF_ODR_Addr (GPIOF_BASE + 0x0C) //0x40011A0C
+#define GPIOG_ODR_Addr (GPIOG_BASE + 0x0C) //0x40011E0C
+#define GPIOA_IDR_Addr (GPIOA_BASE + 0x08) //0x40010808
+#define GPIOB_IDR_Addr (GPIOB_BASE + 0x08) //0x40010C08
+#define GPIOC_IDR_Addr (GPIOC_BASE + 0x08) //0x40011008
+#define GPIOD_IDR_Addr (GPIOD_BASE + 0x08) //0x40011408
+#define GPIOE_IDR_Addr (GPIOE_BASE + 0x08) //0x40011808
+#define GPIOF_IDR_Addr (GPIOF_BASE + 0x08) //0x40011A08
+#define GPIOG_IDR_Addr (GPIOG_BASE + 0x08) //0x40011E08
+
+//IO¿Ú²Ù×÷
+#define PAout(n)   *(unsigned int*)((GPIOA_ODR_Addr & 0xF0000000)+0x02000000+((GPIOA_ODR_Addr &0x00FFFFF)<<5)+(n<<2))  //Êä³ö
+#define PAin(n)    *(unsigned int*)((GPIOA_IDR_Addr & 0xF0000000)+0x02000000+((GPIOA_IDR_Addr &0x00FFFFF)<<5)+(n<<2))  //ÊäÈë
+#define PBout(n)   *(unsigned int*)((GPIOB_ODR_Addr & 0xF0000000)+0x02000000+((GPIOB_ODR_Addr &0x00FFFFF)<<5)+(n<<2))  //Êä³ö
+#define PBin(n)    *(unsigned int*)((GPIOB_IDR_Addr & 0xF0000000)+0x02000000+((GPIOB_IDR_Addr &0x00FFFFF)<<5)+(n<<2))  //ÊäÈë
+#define PCout(n)   *(unsigned int*)((GPIOC_ODR_Addr & 0xF0000000)+0x02000000+((GPIOC_ODR_Addr &0x00FFFFF)<<5)+(n<<2))  //Êä³ö
+#define PCin(n)    *(unsigned int*)((GPIOC_IDR_Addr & 0xF0000000)+0x02000000+((GPIOC_IDR_Addr &0x00FFFFF)<<5)+(n<<2))  //ÊäÈë
+#define PDout(n)   *(unsigned int*)((GPIOD_ODR_Addr & 0xF0000000)+0x02000000+((GPIOD_ODR_Addr &0x00FFFFF)<<5)+(n<<2))  //Êä³ö
+#define PDin(n)    *(unsigned int*)((GPIOD_IDR_Addr & 0xF0000000)+0x02000000+((GPIOD_IDR_Addr &0x00FFFFF)<<5)+(n<<2))  //ÊäÈë
+#define PEout(n)   *(unsigned int*)((GPIOE_ODR_Addr & 0xF0000000)+0x02000000+((GPIOE_ODR_Addr &0x00FFFFF)<<5)+(n<<2))  //Êä³ö
+#define PEin(n)    *(unsigned int*)((GPIOE_IDR_Addr & 0xF0000000)+0x02000000+((GPIOE_IDR_Addr &0x00FFFFF)<<5)+(n<<2))  //ÊäÈë
+#define PFout(n)   *(unsigned int*)((GPIOF_ODR_Addr & 0xF0000000)+0x02000000+((GPIOF_ODR_Addr &0x00FFFFF)<<5)+(n<<2))  //Êä³ö
+#define PFin(n)    *(unsigned int*)((GPIOF_IDR_Addr & 0xF0000000)+0x02000000+((GPIOF_IDR_Addr &0x00FFFFF)<<5)+(n<<2))  //ÊäÈë
+#define PGout(n)   *(unsigned int*)((GPIOG_ODR_Addr & 0xF0000000)+0x02000000+((GPIOG_ODR_Addr &0x00FFFFF)<<5)+(n<<2))  //Êä³ö
+#define PGin(n)    *(unsigned int*)((GPIOG_IDR_Addr & 0xF0000000)+0x02000000+((GPIOG_IDR_Addr &0x00FFFFF)<<5)+(n<<2))  //ÊäÈë
+
+#define Write		0x00
+#define Read		0x01
+
+//Èí¼þÑÓʱº¯Êý
+void delay_us(u32 us);
+void delay_ms(u32 ms);
+
+#endif
+
diff --git a/Program/XLLC/SYSTEM/usart/usart.c b/Program/XLLC/SYSTEM/usart/usart.c
new file mode 100644
index 0000000000000000000000000000000000000000..9af53ae2b0c8b8e5011184f3fdaaa7706f0c250e
--- /dev/null
+++ b/Program/XLLC/SYSTEM/usart/usart.c
@@ -0,0 +1,96 @@
+#include "sys.h"
+#include "usart.h"	  
+#include "FreeRTOS.h"
+
+#pragma import(__use_no_semihosting)             
+             
+struct __FILE 
+{ 
+	int handle;
+}; 
+
+FILE __stdout;       
+
+void _sys_exit(int x) 
+{ 
+	x = x; 
+} 
+
+int fputc(int ch, FILE *f)
+{      
+	while((USART1->SR&0X40)==0);
+		USART1->DR = (u8)ch;
+	return ch;
+}
+
+u8 USART_RX_BUF[USART_REC_LEN];
+u16 USART_RX_STA=0;
+  
+void uart_init(u32 bound)
+{
+	GPIO_InitTypeDef GPIO_InitStructure;
+	USART_InitTypeDef USART_InitStructure;
+	NVIC_InitTypeDef NVIC_InitStructure;
+	
+	RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1|RCC_APB2Periph_GPIOA, ENABLE);
+	
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
+	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
+	GPIO_Init(GPIOA, &GPIO_InitStructure);
+	
+	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
+	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
+	GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+	
+	NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn;
+	NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 3;
+	NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3;
+	NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+	NVIC_Init(&NVIC_InitStructure);
+
+	USART_InitStructure.USART_BaudRate = bound;
+	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
+	USART_InitStructure.USART_StopBits = USART_StopBits_1;
+	USART_InitStructure.USART_Parity = USART_Parity_No;
+	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
+	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
+
+	USART_Init(USART1, &USART_InitStructure);
+	USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
+	USART_Cmd(USART1, ENABLE);
+}
+
+void USART1_IRQHandler(void)
+{
+	u8 Res;
+
+	if(USART_GetITStatus(USART1, USART_IT_RXNE) != RESET)
+	{
+		Res = USART_ReceiveData(USART1);
+		
+		if((USART_RX_STA&0x8000)==0)
+			{
+			if(USART_RX_STA&0x4000)
+			{
+				if(Res!=0x0a)
+					USART_RX_STA = 0;
+				else
+					USART_RX_STA |= 0x8000;
+			}
+			else
+			{	
+				if(Res == 0x0d)
+					USART_RX_STA |= 0x4000;
+				else
+				{
+					USART_RX_BUF[USART_RX_STA & 0X3FFF] = Res;
+					USART_RX_STA++;
+					if(USART_RX_STA>(USART_REC_LEN - 1))USART_RX_STA = 0;
+				}		 
+			}
+		}   		 
+	} 
+}
+
diff --git a/Program/XLLC/SYSTEM/usart/usart.h b/Program/XLLC/SYSTEM/usart/usart.h
new file mode 100644
index 0000000000000000000000000000000000000000..7d2e4eb64294d275a8a0124f52fe773d55bed08b
--- /dev/null
+++ b/Program/XLLC/SYSTEM/usart/usart.h
@@ -0,0 +1,14 @@
+#ifndef __USART_H
+#define __USART_H
+
+#include "stdio.h"	
+#include "sys.h" 
+
+#define USART_REC_LEN  			200  	//¶¨Òå×î´ó½ÓÊÕ×Ö½ÚÊý 200
+	  	
+extern u8  USART_RX_BUF[USART_REC_LEN];
+extern u16 USART_RX_STA;
+void uart_init(u32 bound);
+
+#endif
+
diff --git a/Program/XLLC/TASK/Init_task/Init_task.c b/Program/XLLC/TASK/Init_task/Init_task.c
new file mode 100644
index 0000000000000000000000000000000000000000..c905d73933c18dbfc9d67119a190ea01d1eff7ee
--- /dev/null
+++ b/Program/XLLC/TASK/Init_task/Init_task.c
@@ -0,0 +1,31 @@
+#include "Init_task.h"
+
+#include "LED_task.h"
+
+
+#define START_TASK_PRIO		1			//ÈÎÎñÓÅÏȼ¶
+#define START_STK_SIZE 		128			//ÈÎÎñ¶ÑÕ»´óС	
+TaskHandle_t StartTask_Handler;			//ÈÎÎñ¾ä±ú
+void start_task(void *pvParameters);
+
+void Init_task(void)
+{
+	xTaskCreate((TaskFunction_t )start_task,            //ÈÎÎñº¯Êý
+                (const char*    )"start_task",          //ÈÎÎñÃû³Æ
+                (uint16_t       )START_STK_SIZE,        //ÈÎÎñ¶ÑÕ»´óС
+                (void*          )NULL,                  //´«µÝ¸øÈÎÎñº¯ÊýµÄ²ÎÊý
+                (UBaseType_t    )START_TASK_PRIO,       //ÈÎÎñÓÅÏȼ¶
+                (TaskHandle_t*  )&StartTask_Handler);   //ÈÎÎñ¾ä±ú              
+    vTaskStartScheduler();          //¿ªÆôÈÎÎñµ÷¶È
+}
+
+void start_task(void *pvParameters)
+{
+    taskENTER_CRITICAL();           //½øÈëÁÙ½çÇø
+	
+	LED_task_Create();
+	
+    vTaskDelete(StartTask_Handler); //ɾ³ý¿ªÊ¼ÈÎÎñ
+    taskEXIT_CRITICAL();            //Í˳öÁÙ½çÇø
+}
+
diff --git a/Program/XLLC/TASK/Init_task/Init_task.h b/Program/XLLC/TASK/Init_task/Init_task.h
new file mode 100644
index 0000000000000000000000000000000000000000..f14f3003f282cfe29f0da2845402e9c03e997873
--- /dev/null
+++ b/Program/XLLC/TASK/Init_task/Init_task.h
@@ -0,0 +1,9 @@
+#ifndef __INIT_TASK_H
+#define __INIT_TASK_H
+
+#include "include.h"
+
+void Init_task(void);
+
+#endif
+
diff --git a/Program/XLLC/TASK/LED_task/LED_task.c b/Program/XLLC/TASK/LED_task/LED_task.c
new file mode 100644
index 0000000000000000000000000000000000000000..7227a82838bb42de6f104e030a22ef2025e03f58
--- /dev/null
+++ b/Program/XLLC/TASK/LED_task/LED_task.c
@@ -0,0 +1,52 @@
+#include "LED_task.h"
+#include "LED.h"
+
+#define LED0_TASK_PRIO		1			//ÈÎÎñÓÅÏȼ¶
+#define LED0_STK_SIZE 		128			//ÈÎÎñ¶ÑÕ»´óС	
+TaskHandle_t LED0Task_Handler;			//ÈÎÎñ¾ä±ú
+void LED0_task(void *pvParameters);
+
+#define LED1_TASK_PRIO		1			//ÈÎÎñÓÅÏȼ¶
+#define LED1_STK_SIZE 		128			//ÈÎÎñ¶ÑÕ»´óС	
+TaskHandle_t LED1Task_Handler;			//ÈÎÎñ¾ä±ú
+void LED1_task(void *pvParameters);
+
+void LED_task_Create(void)
+{
+	xTaskCreate((TaskFunction_t )LED0_task,            //ÈÎÎñº¯Êý
+                (const char*    )"LED0_task",          //ÈÎÎñÃû³Æ
+                (uint16_t       )LED0_STK_SIZE,        //ÈÎÎñ¶ÑÕ»´óС
+                (void*          )NULL,                  //´«µÝ¸øÈÎÎñº¯ÊýµÄ²ÎÊý
+                (UBaseType_t    )LED0_TASK_PRIO,       //ÈÎÎñÓÅÏȼ¶
+                (TaskHandle_t*  )&LED0Task_Handler);   //ÈÎÎñ¾ä±ú
+	
+	xTaskCreate((TaskFunction_t )LED1_task,            //ÈÎÎñº¯Êý
+                (const char*    )"LED1_task",          //ÈÎÎñÃû³Æ
+                (uint16_t       )LED1_STK_SIZE,        //ÈÎÎñ¶ÑÕ»´óС
+                (void*          )NULL,                  //´«µÝ¸øÈÎÎñº¯ÊýµÄ²ÎÊý
+                (UBaseType_t    )LED1_TASK_PRIO,       //ÈÎÎñÓÅÏȼ¶
+                (TaskHandle_t*  )&LED1Task_Handler);   //ÈÎÎñ¾ä±ú 
+}
+
+void LED0_task(void *pvParameters)
+{
+	while(1)
+	{
+		LED0 = 0;
+		vTaskDelay(200);
+		LED0 = 1;
+		vTaskDelay(500);
+	}
+}
+
+void LED1_task(void *pvParameters)
+{
+	while(1)
+	{
+		LED1 = 0;
+		vTaskDelay(300);
+		LED1 = 1;
+		vTaskDelay(700);
+	}
+}
+
diff --git a/Program/XLLC/TASK/LED_task/LED_task.h b/Program/XLLC/TASK/LED_task/LED_task.h
new file mode 100644
index 0000000000000000000000000000000000000000..b8126c514ed335b699fcfc381f8c940d4c701fa9
--- /dev/null
+++ b/Program/XLLC/TASK/LED_task/LED_task.h
@@ -0,0 +1,9 @@
+#ifndef __LED_TASK_H
+#define __LED_TASK_H
+
+#include "include.h"
+
+void LED_task_Create(void);
+
+#endif
+
diff --git a/Program/XLLC/USER/DebugConfig/FreeRTOS_STM32F103ZE.dbgconf b/Program/XLLC/USER/DebugConfig/FreeRTOS_STM32F103ZE.dbgconf
new file mode 100644
index 0000000000000000000000000000000000000000..30bdba88ed34bf75fdb5afe3f2ef465229d1d0fe
--- /dev/null
+++ b/Program/XLLC/USER/DebugConfig/FreeRTOS_STM32F103ZE.dbgconf
@@ -0,0 +1,97 @@
+// <<< Use Configuration Wizard in Context Menu >>>
+//  Debug MCU Configuration
+//       DBG_SLEEP
+//  Debug Sleep Mode
+//  0: (FCLK=On, HCLK=Off) FCLK is clocked by the system clock as previously configured by the software while HCLK is disabled
+//  1: (FCLK=On, HCLK=On) HCLK is fed by the same clock that is provided to FCLK
+//       DBG_STOP
+//  Debug Stop Mode
+//  0: (FCLK=Off, HCLK=Off) Clock controller disables all clocks
+//  1: (FCLK=On, HCLK=On) FCLK and HCLK are provided by the internal RC oscillator which remains active
+//       DBG_STANDBY
+//  Debug Standby Mode
+//  0: (FCLK=Off, HCLK=Off) The whole digital part is unpowered.
+//  1: (FCLK=On, HCLK=On) Digital part is powered and FCLK and HCLK are provided by the internal RC oscillator which remains active
+//       DBG_IWDG_STOP
+//  Debug independent watchdog stopped when core is halted
+//  0: The watchdog counter clock continues even if the core is halted
+//  1: The watchdog counter clock is stopped when the core is halted
+//       DBG_WWDG_STOP
+//  Debug window watchdog stopped when core is halted
+//  0: The window watchdog counter clock continues even if the core is halted
+//  1: The window watchdog counter clock is stopped when the core is halted
+//      DBG_TIM1_STOP
+//  Timer 1 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_TIM2_STOP
+//  Timer 2 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_TIM3_STOP
+//  Timer 3 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_TIM4_STOP
+//  Timer 4 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_CAN1_STOP
+//  Debug CAN1 stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: CAN1 receive registers are frozen
+//      DBG_I2C1_SMBUS_TIMEOUT
+//  I2C1 SMBUS timeout mode stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: The SMBUS timeout is frozen
+//      DBG_I2C2_SMBUS_TIMEOUT
+//  I2C2 SMBUS timeout mode stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: The SMBUS timeout is frozen
+//      DBG_TIM8_STOP
+//  Timer 8 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM5_STOP
+//  Timer 5 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM6_STOP
+//  Timer 6 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM7_STOP
+//  Timer 7 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_CAN2_STOP
+//  Debug CAN2 stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: CAN2 receive registers are frozen
+//      DBG_TIM12_STOP
+//  Timer 12 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM13_STOP
+//  Timer 13 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM14_STOP
+//  Timer 14 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM9_STOP
+//  Timer 9 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM10_STOP
+//  Timer 10 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM11_STOP
+//  Timer 11 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+// 
+DbgMCU_CR = 0x00000007;
+// <<< end of configuration section >>>
\ No newline at end of file
diff --git a/Program/XLLC/USER/DebugConfig/FreeRTOS_STM32F103ZE_1.0.0.dbgconf b/Program/XLLC/USER/DebugConfig/FreeRTOS_STM32F103ZE_1.0.0.dbgconf
new file mode 100644
index 0000000000000000000000000000000000000000..9c4804d4d74d089f3e1df1315b4c751c7189115a
--- /dev/null
+++ b/Program/XLLC/USER/DebugConfig/FreeRTOS_STM32F103ZE_1.0.0.dbgconf
@@ -0,0 +1,36 @@
+// File: STM32F101_102_103_105_107.dbgconf
+// Version: 1.0.0
+// Note: refer to STM32F101xx STM32F102xx STM32F103xx STM32F105xx STM32F107xx Reference manual (RM0008)
+//                STM32F101xx STM32F102xx STM32F103xx STM32F105xx STM32F107xx datasheets
+
+// <<< Use Configuration Wizard in Context Menu >>>
+
+//  Debug MCU configuration register (DBGMCU_CR)
+//                                    Reserved bits must be kept at reset value
+//    DBG_TIM11_STOP            TIM11 counter stopped when core is halted
+//    DBG_TIM10_STOP            TIM10 counter stopped when core is halted
+//    DBG_TIM9_STOP             TIM9 counter stopped when core is halted
+//    DBG_TIM14_STOP            TIM14 counter stopped when core is halted
+//    DBG_TIM13_STOP            TIM13 counter stopped when core is halted
+//    DBG_TIM12_STOP            TIM12 counter stopped when core is halted
+//    DBG_CAN2_STOP             Debug CAN2 stopped when core is halted
+//    DBG_TIM7_STOP             TIM7 counter stopped when core is halted
+//    DBG_TIM6_STOP             TIM6 counter stopped when core is halted
+//    DBG_TIM5_STOP             TIM5 counter stopped when core is halted
+//    DBG_TIM8_STOP             TIM8 counter stopped when core is halted
+//    DBG_I2C2_SMBUS_TIMEOUT    SMBUS timeout mode stopped when core is halted
+//    DBG_I2C1_SMBUS_TIMEOUT    SMBUS timeout mode stopped when core is halted
+//    DBG_CAN1_STOP             Debug CAN1 stopped when Core is halted
+//    DBG_TIM4_STOP             TIM4 counter stopped when core is halted
+//    DBG_TIM3_STOP             TIM3 counter stopped when core is halted
+//    DBG_TIM2_STOP             TIM2 counter stopped when core is halted
+//    DBG_TIM1_STOP             TIM1 counter stopped when core is halted
+//     DBG_WWDG_STOP             Debug window watchdog stopped when core is halted
+//     DBG_IWDG_STOP             Debug independent watchdog stopped when core is halted
+//     DBG_STANDBY               Debug standby mode
+//     DBG_STOP                  Debug stop mode
+//     DBG_SLEEP                 Debug sleep mode
+// 
+DbgMCU_CR = 0x00000007;
+
+// <<< end of configuration section >>>
diff --git a/Program/XLLC/USER/DebugConfig/LED_STM32F103ZE.dbgconf b/Program/XLLC/USER/DebugConfig/LED_STM32F103ZE.dbgconf
new file mode 100644
index 0000000000000000000000000000000000000000..30bdba88ed34bf75fdb5afe3f2ef465229d1d0fe
--- /dev/null
+++ b/Program/XLLC/USER/DebugConfig/LED_STM32F103ZE.dbgconf
@@ -0,0 +1,97 @@
+// <<< Use Configuration Wizard in Context Menu >>>
+//  Debug MCU Configuration
+//       DBG_SLEEP
+//  Debug Sleep Mode
+//  0: (FCLK=On, HCLK=Off) FCLK is clocked by the system clock as previously configured by the software while HCLK is disabled
+//  1: (FCLK=On, HCLK=On) HCLK is fed by the same clock that is provided to FCLK
+//       DBG_STOP
+//  Debug Stop Mode
+//  0: (FCLK=Off, HCLK=Off) Clock controller disables all clocks
+//  1: (FCLK=On, HCLK=On) FCLK and HCLK are provided by the internal RC oscillator which remains active
+//       DBG_STANDBY
+//  Debug Standby Mode
+//  0: (FCLK=Off, HCLK=Off) The whole digital part is unpowered.
+//  1: (FCLK=On, HCLK=On) Digital part is powered and FCLK and HCLK are provided by the internal RC oscillator which remains active
+//       DBG_IWDG_STOP
+//  Debug independent watchdog stopped when core is halted
+//  0: The watchdog counter clock continues even if the core is halted
+//  1: The watchdog counter clock is stopped when the core is halted
+//       DBG_WWDG_STOP
+//  Debug window watchdog stopped when core is halted
+//  0: The window watchdog counter clock continues even if the core is halted
+//  1: The window watchdog counter clock is stopped when the core is halted
+//      DBG_TIM1_STOP
+//  Timer 1 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_TIM2_STOP
+//  Timer 2 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_TIM3_STOP
+//  Timer 3 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_TIM4_STOP
+//  Timer 4 counter stopped when core is halted
+//  0: The clock of the involved Timer Counter is fed even if the core is halted
+//  1: The clock of the involved Timer counter is stopped when the core is halted
+//      DBG_CAN1_STOP
+//  Debug CAN1 stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: CAN1 receive registers are frozen
+//      DBG_I2C1_SMBUS_TIMEOUT
+//  I2C1 SMBUS timeout mode stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: The SMBUS timeout is frozen
+//      DBG_I2C2_SMBUS_TIMEOUT
+//  I2C2 SMBUS timeout mode stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: The SMBUS timeout is frozen
+//      DBG_TIM8_STOP
+//  Timer 8 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM5_STOP
+//  Timer 5 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM6_STOP
+//  Timer 6 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM7_STOP
+//  Timer 7 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_CAN2_STOP
+//  Debug CAN2 stopped when Core is halted
+//  0: Same behavior as in normal mode
+//  1: CAN2 receive registers are frozen
+//      DBG_TIM12_STOP
+//  Timer 12 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM13_STOP
+//  Timer 13 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM14_STOP
+//  Timer 14 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM9_STOP
+//  Timer 9 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM10_STOP
+//  Timer 10 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+//      DBG_TIM11_STOP
+//  Timer 11 counter stopped when core is halted
+//  0: The clock of the involved timer counter is fed even if the core is halted, and the outputs behave normally.
+//  1: The clock of the involved timer counter is stopped when the core is halted, and the outputs are disabled (as if there were an emergency stop in response to a break event).
+// 
+DbgMCU_CR = 0x00000007;
+// <<< end of configuration section >>>
\ No newline at end of file
diff --git a/Program/XLLC/USER/EventRecorderStub.scvd b/Program/XLLC/USER/EventRecorderStub.scvd
new file mode 100644
index 0000000000000000000000000000000000000000..0fb3ee58a621ab7a1ac0664f7bf9d51959574cde
--- /dev/null
+++ b/Program/XLLC/USER/EventRecorderStub.scvd
@@ -0,0 +1,9 @@
+
+
+
+
+       
+  
+  
+
+
diff --git a/Program/XLLC/USER/JLinkSettings.ini b/Program/XLLC/USER/JLinkSettings.ini
new file mode 100644
index 0000000000000000000000000000000000000000..1ca0b40004e35cc9b912e01e892b8e54064b6b30
--- /dev/null
+++ b/Program/XLLC/USER/JLinkSettings.ini
@@ -0,0 +1,35 @@
+[BREAKPOINTS]
+ForceImpTypeAny = 0
+ShowInfoWin = 1
+EnableFlashBP = 2
+BPDuringExecution = 0
+[CFI]
+CFISize = 0x00
+CFIAddr = 0x00
+[CPU]
+OverrideMemMap = 0
+AllowSimulation = 1
+ScriptFile=""
+[FLASH]
+CacheExcludeSize = 0x00
+CacheExcludeAddr = 0x00
+MinNumBytesFlashDL = 0
+SkipProgOnCRCMatch = 1
+VerifyDownload = 1
+AllowCaching = 1
+EnableFlashDL = 2
+Override = 0
+Device="UNSPECIFIED"
+[GENERAL]
+WorkRAMSize = 0x00
+WorkRAMAddr = 0x00
+RAMUsageLimit = 0x00
+[SWO]
+SWOLogFile=""
+[MEM]
+RdOverrideOrMask = 0x00
+RdOverrideAndMask = 0xFFFFFFFF
+RdOverrideAddr = 0xFFFFFFFF
+WrOverrideOrMask = 0x00
+WrOverrideAndMask = 0xFFFFFFFF
+WrOverrideAddr = 0xFFFFFFFF
diff --git a/Program/XLLC/USER/XLLC.uvprojx b/Program/XLLC/USER/XLLC.uvprojx
new file mode 100644
index 0000000000000000000000000000000000000000..4bf695ae9b4b25a1d006e35d7eb5a3871e8bc095
--- /dev/null
+++ b/Program/XLLC/USER/XLLC.uvprojx
@@ -0,0 +1,650 @@
+
+
+
+  2.1
+
+  
    ### uVision Project, (C) Keil Software
    
+
+  
+    
+      FreeRTOS
+      0x4
+      ARM-ADS
+      5060960::V5.06 update 7 (build 960)::ARMCC
+      0
+      
+        
+          STM32F103ZE
+          STMicroelectronics
+          Keil.STM32F1xx_DFP.2.3.0
+          http://www.keil.com/pack/
+          IROM(0x08000000,0x80000) IRAM(0x20000000,0x10000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE
+          
+          
+          UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000 -FP0($$Device:STM32F103ZE$Flash\STM32F10x_512.FLM))
+          0
+          $$Device:STM32F103ZE$Device\Include\stm32f10x.h
+          
+          
+          
+          
+          
+          
+          
+          
+          
+          $$Device:STM32F103ZE$SVD\STM32F103xx.svd
+          0
+          0
+          
+          
+          
+          
+          
+          
+            0
+            0
+            0
+            0
+            1
+          
+          ..\OBJ\
+          LED
+          1
+          0
+          1
+          1
+          1
+          ..\OBJ\
+          1
+          0
+          0
+          
+            0
+            0
+            
+            
+            0
+            0
+            0
+            0
+          
+          
+            0
+            0
+            
+            
+            0
+            0
+            0
+            0
+          
+          
+            0
+            0
+            
+            
+            0
+            0
+            0
+            0
+          
+          0
+          
+        
+        
+          0
+          0
+          0
+          0
+          0
+          1
+          0
+          0
+          0
+          0
+          3
+          
+          
+          1
+        
+        
+          SARMCM3.DLL
+           -REMAP
+          DARMSTM.DLL
+          -pSTM32F103ZE
+          SARMCM3.DLL
+          
+          TARMSTM.DLL
+          -pSTM32F103ZE
+        
+        
+          
+            1
+            0
+            0
+            0
+            16
+          
+        
+        
+          
+            1
+            0
+            0
+            1
+            1
+            -1
+          
+          1
+          BIN\UL2CM3.DLL
+          
+          
+          
+          
+          
+          0
+        
+        
+          
+            0
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+            1
+            1
+            0
+            1
+            1
+            0
+            0
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            1
+            0
+            0
+            "Cortex-M3"
+            
+            0
+            0
+            0
+            1
+            1
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            8
+            0
+            0
+            0
+            0
+            3
+            3
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            1
+            0
+            0
+            0
+            0
+            1
+            0
+            
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x20000000
+                0x10000
+              
+              
+                1
+                0x8000000
+                0x80000
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                1
+                0x8000000
+                0x80000
+              
+              
+                1
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x0
+                0x0
+              
+              
+                0
+                0x20000000
+                0x10000
+              
+              
+                0
+                0x0
+                0x0
+              
+            
+            
+          
+          
+            1
+            3
+            0
+            0
+            1
+            0
+            0
+            0
+            0
+            0
+            2
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            
+              
+              STM32F10X_HD,USE_STDPERIPH_DRIVER
+              
+              ..\USER;..\CORE;..\STM32F10x_FWLib\inc;..\SYSTEM\sys;..\SYSTEM\usart;..\FreeRTOS\include;..\FreeRTOS\portable\RVDS\ARM_CM3;..\TASK\Init_task;..\HARDWARE\LED;..\TASK\LED_task
+            
+          
+          
+            1
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            0
+            1
+            
+              
+              
+              
+              
+            
+          
+          
+            0
+            0
+            0
+            0
+            1
+            0
+            0x08000000
+            0x20000000
+            
+            
+            
+            
+            
+            
+            
+          
+        
+      
+      
+        
+          USER
+          
+            
+              main.c
+              1
+              .\main.c
+            
+            
+              stm32f10x_it.c
+              1
+              .\stm32f10x_it.c
+            
+            
+              system_stm32f10x.c
+              1
+              .\system_stm32f10x.c
+            
+          
+        
+        
+          TASK
+          
+            
+              Init_task.c
+              1
+              ..\TASK\Init_task\Init_task.c
+            
+            
+              LED_task.c
+              1
+              ..\TASK\LED_task\LED_task.c
+            
+          
+        
+        
+          HARDWARE
+          
+            
+              LED.c
+              1
+              ..\HARDWARE\LED\LED.c
+            
+          
+        
+        
+          SYSTEM
+          
+            
+              sys.c
+              1
+              ..\SYSTEM\sys\sys.c
+            
+            
+              usart.c
+              1
+              ..\SYSTEM\usart\usart.c
+            
+          
+        
+        
+          CORE
+          
+            
+              core_cm3.c
+              1
+              ..\CORE\core_cm3.c
+            
+            
+              startup_stm32f10x_hd.s
+              2
+              ..\CORE\startup_stm32f10x_hd.s
+            
+          
+        
+        
+          FWLIB
+          
+            
+              misc.c
+              1
+              ..\STM32F10x_FWLib\src\misc.c
+            
+            
+              stm32f10x_gpio.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_gpio.c
+            
+            
+              stm32f10x_dbgmcu.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_dbgmcu.c
+            
+            
+              stm32f10x_rcc.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_rcc.c
+            
+            
+              stm32f10x_usart.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_usart.c
+            
+            
+              stm32f10x_adc.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_adc.c
+            
+            
+              stm32f10x_bkp.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_bkp.c
+            
+            
+              stm32f10x_can.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_can.c
+            
+            
+              stm32f10x_cec.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_cec.c
+            
+            
+              stm32f10x_crc.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_crc.c
+            
+            
+              stm32f10x_dac.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_dac.c
+            
+            
+              stm32f10x_dma.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_dma.c
+            
+            
+              stm32f10x_exti.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_exti.c
+            
+            
+              stm32f10x_flash.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_flash.c
+            
+            
+              stm32f10x_fsmc.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_fsmc.c
+            
+            
+              stm32f10x_i2c.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_i2c.c
+            
+            
+              stm32f10x_iwdg.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_iwdg.c
+            
+            
+              stm32f10x_pwr.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_pwr.c
+            
+            
+              stm32f10x_rtc.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_rtc.c
+            
+            
+              stm32f10x_sdio.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_sdio.c
+            
+            
+              stm32f10x_spi.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_spi.c
+            
+            
+              stm32f10x_tim.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_tim.c
+            
+            
+              stm32f10x_wwdg.c
+              1
+              ..\STM32F10x_FWLib\src\stm32f10x_wwdg.c
+            
+          
+        
+        
+          FreeRTOS_CORE
+          
+            
+              croutine.c
+              1
+              ..\FreeRTOS\croutine.c
+            
+            
+              event_groups.c
+              1
+              ..\FreeRTOS\event_groups.c
+            
+            
+              list.c
+              1
+              ..\FreeRTOS\list.c
+            
+            
+              queue.c
+              1
+              ..\FreeRTOS\queue.c
+            
+            
+              tasks.c
+              1
+              ..\FreeRTOS\tasks.c
+            
+            
+              timers.c
+              1
+              ..\FreeRTOS\timers.c
+            
+          
+        
+        
+          FreeRTOS_PORTABLE
+          
+            
+              heap_4.c
+              1
+              ..\FreeRTOS\portable\MemMang\heap_4.c
+            
+            
+              port.c
+              1
+              ..\FreeRTOS\portable\RVDS\ARM_CM3\port.c
+            
+          
+        
+        
+          README
+        
+      
+    
+  
+
+  
+    
+    
+    
+  
+
+  
+    
+      
+        GCSLC
+        1
+      
+    
+  
+
+    
diff --git a/Program/XLLC/USER/include.h b/Program/XLLC/USER/include.h
new file mode 100644
index 0000000000000000000000000000000000000000..155d1a13ca0d5b42ff124962fcf8c4b5b953dbcb
--- /dev/null
+++ b/Program/XLLC/USER/include.h
@@ -0,0 +1,17 @@
+#ifndef __INCLUDE_H
+#define __INCLUDE_H
+
+/*-----		System				-----*/
+#include "sys.h"
+#include "usart.h"
+
+/*-----		FreeRTOS			-----*/
+#include "FreeRTOS.h"
+#include "task.h"
+#include "Init_task.h"
+
+/*-----		Hareware			-----*/
+#include "LED.h"
+
+#endif
+
diff --git a/Program/XLLC/USER/main.c b/Program/XLLC/USER/main.c
new file mode 100644
index 0000000000000000000000000000000000000000..75b9dc54879fff81bcb4e85fb168d96ff34eee75
--- /dev/null
+++ b/Program/XLLC/USER/main.c
@@ -0,0 +1,15 @@
+#include "include.h"
+
+void Init(void)
+{
+	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_4);
+	uart_init(115200);
+	LED_Init();
+}
+
+int main(void)
+{
+	Init();
+	Init_task();
+}
+
diff --git a/Program/XLLC/USER/stm32f10x.h b/Program/XLLC/USER/stm32f10x.h
new file mode 100644
index 0000000000000000000000000000000000000000..af0c7c9af19790ef545988914bbed1b3b8c217ba
--- /dev/null
+++ b/Program/XLLC/USER/stm32f10x.h
@@ -0,0 +1,8336 @@
+/**
+  ******************************************************************************
+  * @file    stm32f10x.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer Header File. 
+  *          This file contains all the peripheral register's definitions, bits 
+  *          definitions and memory mapping for STM32F10x Connectivity line, 
+  *          High density, High density value line, Medium density, 
+  *          Medium density Value line, Low density, Low density Value line 
+  *          and XL-density devices.
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The device used in the target application
+  *              - To use or not the peripheral’s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral’s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_STDPERIPH_DRIVER"
+  *              - To change few application-specific parameters such as the HSE 
+  *                crystal frequency
+  *           - Data structures and the address mapping for all peripherals
+  *           - Peripheral's registers declarations and bits definition
+  *           - Macros to access peripheral’s registers hardware
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x
+  * @{
+  */
+    
+#ifndef __STM32F10x_H
+#define __STM32F10x_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+  
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+  
+/* Uncomment the line below according to the target STM32 device used in your
+   application 
+  */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL) 
+  /* #define STM32F10X_LD */     /*!< STM32F10X_LD: STM32 Low density devices */
+  /* #define STM32F10X_LD_VL */  /*!< STM32F10X_LD_VL: STM32 Low density Value Line devices */  
+  /* #define STM32F10X_MD */     /*!< STM32F10X_MD: STM32 Medium density devices */
+  /* #define STM32F10X_MD_VL */  /*!< STM32F10X_MD_VL: STM32 Medium density Value Line devices */  
+  /* #define STM32F10X_HD */     /*!< STM32F10X_HD: STM32 High density devices */
+  /* #define STM32F10X_HD_VL */  /*!< STM32F10X_HD_VL: STM32 High density value line devices */  
+  /* #define STM32F10X_XL */     /*!< STM32F10X_XL: STM32 XL-density devices */
+  /* #define STM32F10X_CL */     /*!< STM32F10X_CL: STM32 Connectivity line devices */
+#endif
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+
+ - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers
+   where the Flash memory density ranges between 16 and 32 Kbytes.
+ - Low-density value line devices are STM32F100xx microcontrollers where the Flash
+   memory density ranges between 16 and 32 Kbytes.
+ - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers
+   where the Flash memory density ranges between 64 and 128 Kbytes.
+ - Medium-density value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 64 and 128 Kbytes.   
+ - High-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 256 and 512 Kbytes.
+ - High-density value line devices are STM32F100xx microcontrollers where the 
+   Flash memory density ranges between 256 and 512 Kbytes.   
+ - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where
+   the Flash memory density ranges between 512 and 1024 Kbytes.
+ - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.
+  */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD) && !defined (STM32F10X_HD_VL) && !defined (STM32F10X_XL) && !defined (STM32F10X_CL)
+ #error "Please select first the target STM32F10x device used in your application (in stm32f10x.h file)"
+#endif
+
+#if !defined  USE_STDPERIPH_DRIVER
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_STDPERIPH_DRIVER*/
+#endif
+
+/**
+ * @brief In the following line adjust the value of External High Speed oscillator (HSE)
+   used in your application 
+   
+   Tip: To avoid modifying this file each time you need to use different HSE, you
+        can define the HSE value in your toolchain compiler preprocessor.
+  */           
+#if !defined  HSE_VALUE
+ #ifdef STM32F10X_CL   
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+ #else 
+  #define HSE_VALUE    ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+ #endif /* STM32F10X_CL */
+#endif /* HSE_VALUE */
+
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup 
+   Timeout value 
+   */
+#define HSE_STARTUP_TIMEOUT   ((uint16_t)0x0500) /*!< Time out for HSE start up */
+
+#define HSI_VALUE    ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+
+/**
+ * @brief STM32F10x Standard Peripheral Library version number
+   */
+#define __STM32F10X_STDPERIPH_VERSION_MAIN   (0x03) /*!< [31:24] main version */                                  
+#define __STM32F10X_STDPERIPH_VERSION_SUB1   (0x05) /*!< [23:16] sub1 version */
+#define __STM32F10X_STDPERIPH_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
+#define __STM32F10X_STDPERIPH_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
+#define __STM32F10X_STDPERIPH_VERSION       ( (__STM32F10X_STDPERIPH_VERSION_MAIN << 24)\
+                                             |(__STM32F10X_STDPERIPH_VERSION_SUB1 << 16)\
+                                             |(__STM32F10X_STDPERIPH_VERSION_SUB2 << 8)\
+                                             |(__STM32F10X_STDPERIPH_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Configuration_section_for_CMSIS
+  * @{
+  */
+
+/**
+ * @brief Configuration of the Cortex-M3 Processor and Core Peripherals 
+ */
+#ifdef STM32F10X_XL
+ #define __MPU_PRESENT             1 /*!< STM32 XL-density devices provide an MPU */
+#else
+ #define __MPU_PRESENT             0 /*!< Other STM32 devices does not provide an MPU */
+#endif /* STM32F10X_XL */
+#define __NVIC_PRIO_BITS          4 /*!< STM32 uses 4 Bits for the Priority Levels    */
+#define __Vendor_SysTickConfig    0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @brief STM32F10x Interrupt Number Definition, according to the selected device 
+ *        in @ref Library_configuration_section 
+ */
+typedef enum IRQn
+{
+/******  Cortex-M3 Processor Exceptions Numbers ***************************************************/
+  NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                             */
+  MemoryManagement_IRQn       = -12,    /*!< 4 Cortex-M3 Memory Management Interrupt              */
+  BusFault_IRQn               = -11,    /*!< 5 Cortex-M3 Bus Fault Interrupt                      */
+  UsageFault_IRQn             = -10,    /*!< 6 Cortex-M3 Usage Fault Interrupt                    */
+  SVCall_IRQn                 = -5,     /*!< 11 Cortex-M3 SV Call Interrupt                       */
+  DebugMonitor_IRQn           = -4,     /*!< 12 Cortex-M3 Debug Monitor Interrupt                 */
+  PendSV_IRQn                 = -2,     /*!< 14 Cortex-M3 Pend SV Interrupt                       */
+  SysTick_IRQn                = -1,     /*!< 15 Cortex-M3 System Tick Interrupt                   */
+
+/******  STM32 specific Interrupt Numbers *********************************************************/
+  WWDG_IRQn                   = 0,      /*!< Window WatchDog Interrupt                            */
+  PVD_IRQn                    = 1,      /*!< PVD through EXTI Line detection Interrupt            */
+  TAMPER_IRQn                 = 2,      /*!< Tamper Interrupt                                     */
+  RTC_IRQn                    = 3,      /*!< RTC global Interrupt                                 */
+  FLASH_IRQn                  = 4,      /*!< FLASH global Interrupt                               */
+  RCC_IRQn                    = 5,      /*!< RCC global Interrupt                                 */
+  EXTI0_IRQn                  = 6,      /*!< EXTI Line0 Interrupt                                 */
+  EXTI1_IRQn                  = 7,      /*!< EXTI Line1 Interrupt                                 */
+  EXTI2_IRQn                  = 8,      /*!< EXTI Line2 Interrupt                                 */
+  EXTI3_IRQn                  = 9,      /*!< EXTI Line3 Interrupt                                 */
+  EXTI4_IRQn                  = 10,     /*!< EXTI Line4 Interrupt                                 */
+  DMA1_Channel1_IRQn          = 11,     /*!< DMA1 Channel 1 global Interrupt                      */
+  DMA1_Channel2_IRQn          = 12,     /*!< DMA1 Channel 2 global Interrupt                      */
+  DMA1_Channel3_IRQn          = 13,     /*!< DMA1 Channel 3 global Interrupt                      */
+  DMA1_Channel4_IRQn          = 14,     /*!< DMA1 Channel 4 global Interrupt                      */
+  DMA1_Channel5_IRQn          = 15,     /*!< DMA1 Channel 5 global Interrupt                      */
+  DMA1_Channel6_IRQn          = 16,     /*!< DMA1 Channel 6 global Interrupt                      */
+  DMA1_Channel7_IRQn          = 17,     /*!< DMA1 Channel 7 global Interrupt                      */
+
+#ifdef STM32F10X_LD
+  ADC1_2_IRQn                 = 18,     /*!< ADC1 and ADC2 global Interrupt                       */
+  USB_HP_CAN1_TX_IRQn         = 19,     /*!< USB Device High Priority or CAN1 TX Interrupts       */
+  USB_LP_CAN1_RX0_IRQn        = 20,     /*!< USB Device Low Priority or CAN1 RX0 Interrupts       */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                   */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                   */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_IRQn               = 24,     /*!< TIM1 Break Interrupt                                 */
+  TIM1_UP_IRQn                = 25,     /*!< TIM1 Update Interrupt                                */
+  TIM1_TRG_COM_IRQn           = 26,     /*!< TIM1 Trigger and Commutation Interrupt               */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  USBWakeUp_IRQn              = 42      /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */    
+#endif /* STM32F10X_LD */  
+
+#ifdef STM32F10X_LD_VL
+  ADC1_IRQn                   = 18,     /*!< ADC1 global Interrupt                                */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_TIM15_IRQn         = 24,     /*!< TIM1 Break and TIM15 Interrupts                      */
+  TIM1_UP_TIM16_IRQn          = 25,     /*!< TIM1 Update and TIM16 Interrupts                     */
+  TIM1_TRG_COM_TIM17_IRQn     = 26,     /*!< TIM1 Trigger and Commutation and TIM17 Interrupt     */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  CEC_IRQn                    = 42,     /*!< HDMI-CEC Interrupt                                   */
+  TIM6_DAC_IRQn               = 54,     /*!< TIM6 and DAC underrun Interrupt                      */
+  TIM7_IRQn                   = 55      /*!< TIM7 Interrupt                                       */       
+#endif /* STM32F10X_LD_VL */
+
+#ifdef STM32F10X_MD
+  ADC1_2_IRQn                 = 18,     /*!< ADC1 and ADC2 global Interrupt                       */
+  USB_HP_CAN1_TX_IRQn         = 19,     /*!< USB Device High Priority or CAN1 TX Interrupts       */
+  USB_LP_CAN1_RX0_IRQn        = 20,     /*!< USB Device Low Priority or CAN1 RX0 Interrupts       */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                   */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                   */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_IRQn               = 24,     /*!< TIM1 Break Interrupt                                 */
+  TIM1_UP_IRQn                = 25,     /*!< TIM1 Update Interrupt                                */
+  TIM1_TRG_COM_IRQn           = 26,     /*!< TIM1 Trigger and Commutation Interrupt               */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  USBWakeUp_IRQn              = 42      /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */  
+#endif /* STM32F10X_MD */  
+
+#ifdef STM32F10X_MD_VL
+  ADC1_IRQn                   = 18,     /*!< ADC1 global Interrupt                                */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_TIM15_IRQn         = 24,     /*!< TIM1 Break and TIM15 Interrupts                      */
+  TIM1_UP_TIM16_IRQn          = 25,     /*!< TIM1 Update and TIM16 Interrupts                     */
+  TIM1_TRG_COM_TIM17_IRQn     = 26,     /*!< TIM1 Trigger and Commutation and TIM17 Interrupt     */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  CEC_IRQn                    = 42,     /*!< HDMI-CEC Interrupt                                   */
+  TIM6_DAC_IRQn               = 54,     /*!< TIM6 and DAC underrun Interrupt                      */
+  TIM7_IRQn                   = 55      /*!< TIM7 Interrupt                                       */       
+#endif /* STM32F10X_MD_VL */
+
+#ifdef STM32F10X_HD
+  ADC1_2_IRQn                 = 18,     /*!< ADC1 and ADC2 global Interrupt                       */
+  USB_HP_CAN1_TX_IRQn         = 19,     /*!< USB Device High Priority or CAN1 TX Interrupts       */
+  USB_LP_CAN1_RX0_IRQn        = 20,     /*!< USB Device Low Priority or CAN1 RX0 Interrupts       */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                   */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                   */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_IRQn               = 24,     /*!< TIM1 Break Interrupt                                 */
+  TIM1_UP_IRQn                = 25,     /*!< TIM1 Update Interrupt                                */
+  TIM1_TRG_COM_IRQn           = 26,     /*!< TIM1 Trigger and Commutation Interrupt               */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  USBWakeUp_IRQn              = 42,     /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+  TIM8_BRK_IRQn               = 43,     /*!< TIM8 Break Interrupt                                 */
+  TIM8_UP_IRQn                = 44,     /*!< TIM8 Update Interrupt                                */
+  TIM8_TRG_COM_IRQn           = 45,     /*!< TIM8 Trigger and Commutation Interrupt               */
+  TIM8_CC_IRQn                = 46,     /*!< TIM8 Capture Compare Interrupt                       */
+  ADC3_IRQn                   = 47,     /*!< ADC3 global Interrupt                                */
+  FSMC_IRQn                   = 48,     /*!< FSMC global Interrupt                                */
+  SDIO_IRQn                   = 49,     /*!< SDIO global Interrupt                                */
+  TIM5_IRQn                   = 50,     /*!< TIM5 global Interrupt                                */
+  SPI3_IRQn                   = 51,     /*!< SPI3 global Interrupt                                */
+  UART4_IRQn                  = 52,     /*!< UART4 global Interrupt                               */
+  UART5_IRQn                  = 53,     /*!< UART5 global Interrupt                               */
+  TIM6_IRQn                   = 54,     /*!< TIM6 global Interrupt                                */
+  TIM7_IRQn                   = 55,     /*!< TIM7 global Interrupt                                */
+  DMA2_Channel1_IRQn          = 56,     /*!< DMA2 Channel 1 global Interrupt                      */
+  DMA2_Channel2_IRQn          = 57,     /*!< DMA2 Channel 2 global Interrupt                      */
+  DMA2_Channel3_IRQn          = 58,     /*!< DMA2 Channel 3 global Interrupt                      */
+  DMA2_Channel4_5_IRQn        = 59      /*!< DMA2 Channel 4 and Channel 5 global Interrupt        */
+#endif /* STM32F10X_HD */  
+
+#ifdef STM32F10X_HD_VL
+  ADC1_IRQn                   = 18,     /*!< ADC1 global Interrupt                                */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_TIM15_IRQn         = 24,     /*!< TIM1 Break and TIM15 Interrupts                      */
+  TIM1_UP_TIM16_IRQn          = 25,     /*!< TIM1 Update and TIM16 Interrupts                     */
+  TIM1_TRG_COM_TIM17_IRQn     = 26,     /*!< TIM1 Trigger and Commutation and TIM17 Interrupt     */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  CEC_IRQn                    = 42,     /*!< HDMI-CEC Interrupt                                   */
+  TIM12_IRQn                  = 43,     /*!< TIM12 global Interrupt                               */
+  TIM13_IRQn                  = 44,     /*!< TIM13 global Interrupt                               */
+  TIM14_IRQn                  = 45,     /*!< TIM14 global Interrupt                               */
+  TIM5_IRQn                   = 50,     /*!< TIM5 global Interrupt                                */
+  SPI3_IRQn                   = 51,     /*!< SPI3 global Interrupt                                */
+  UART4_IRQn                  = 52,     /*!< UART4 global Interrupt                               */
+  UART5_IRQn                  = 53,     /*!< UART5 global Interrupt                               */  
+  TIM6_DAC_IRQn               = 54,     /*!< TIM6 and DAC underrun Interrupt                      */
+  TIM7_IRQn                   = 55,     /*!< TIM7 Interrupt                                       */  
+  DMA2_Channel1_IRQn          = 56,     /*!< DMA2 Channel 1 global Interrupt                      */
+  DMA2_Channel2_IRQn          = 57,     /*!< DMA2 Channel 2 global Interrupt                      */
+  DMA2_Channel3_IRQn          = 58,     /*!< DMA2 Channel 3 global Interrupt                      */
+  DMA2_Channel4_5_IRQn        = 59,     /*!< DMA2 Channel 4 and Channel 5 global Interrupt        */
+  DMA2_Channel5_IRQn          = 60      /*!< DMA2 Channel 5 global Interrupt (DMA2 Channel 5 is 
+                                             mapped at position 60 only if the MISC_REMAP bit in 
+                                             the AFIO_MAPR2 register is set)                      */       
+#endif /* STM32F10X_HD_VL */
+
+#ifdef STM32F10X_XL
+  ADC1_2_IRQn                 = 18,     /*!< ADC1 and ADC2 global Interrupt                       */
+  USB_HP_CAN1_TX_IRQn         = 19,     /*!< USB Device High Priority or CAN1 TX Interrupts       */
+  USB_LP_CAN1_RX0_IRQn        = 20,     /*!< USB Device Low Priority or CAN1 RX0 Interrupts       */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                   */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                   */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_TIM9_IRQn          = 24,     /*!< TIM1 Break Interrupt and TIM9 global Interrupt       */
+  TIM1_UP_TIM10_IRQn          = 25,     /*!< TIM1 Update Interrupt and TIM10 global Interrupt     */
+  TIM1_TRG_COM_TIM11_IRQn     = 26,     /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  USBWakeUp_IRQn              = 42,     /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */
+  TIM8_BRK_TIM12_IRQn         = 43,     /*!< TIM8 Break Interrupt and TIM12 global Interrupt      */
+  TIM8_UP_TIM13_IRQn          = 44,     /*!< TIM8 Update Interrupt and TIM13 global Interrupt     */
+  TIM8_TRG_COM_TIM14_IRQn     = 45,     /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */
+  TIM8_CC_IRQn                = 46,     /*!< TIM8 Capture Compare Interrupt                       */
+  ADC3_IRQn                   = 47,     /*!< ADC3 global Interrupt                                */
+  FSMC_IRQn                   = 48,     /*!< FSMC global Interrupt                                */
+  SDIO_IRQn                   = 49,     /*!< SDIO global Interrupt                                */
+  TIM5_IRQn                   = 50,     /*!< TIM5 global Interrupt                                */
+  SPI3_IRQn                   = 51,     /*!< SPI3 global Interrupt                                */
+  UART4_IRQn                  = 52,     /*!< UART4 global Interrupt                               */
+  UART5_IRQn                  = 53,     /*!< UART5 global Interrupt                               */
+  TIM6_IRQn                   = 54,     /*!< TIM6 global Interrupt                                */
+  TIM7_IRQn                   = 55,     /*!< TIM7 global Interrupt                                */
+  DMA2_Channel1_IRQn          = 56,     /*!< DMA2 Channel 1 global Interrupt                      */
+  DMA2_Channel2_IRQn          = 57,     /*!< DMA2 Channel 2 global Interrupt                      */
+  DMA2_Channel3_IRQn          = 58,     /*!< DMA2 Channel 3 global Interrupt                      */
+  DMA2_Channel4_5_IRQn        = 59      /*!< DMA2 Channel 4 and Channel 5 global Interrupt        */
+#endif /* STM32F10X_XL */  
+
+#ifdef STM32F10X_CL
+  ADC1_2_IRQn                 = 18,     /*!< ADC1 and ADC2 global Interrupt                       */
+  CAN1_TX_IRQn                = 19,     /*!< USB Device High Priority or CAN1 TX Interrupts       */
+  CAN1_RX0_IRQn               = 20,     /*!< USB Device Low Priority or CAN1 RX0 Interrupts       */
+  CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                   */
+  CAN1_SCE_IRQn               = 22,     /*!< CAN1 SCE Interrupt                                   */
+  EXTI9_5_IRQn                = 23,     /*!< External Line[9:5] Interrupts                        */
+  TIM1_BRK_IRQn               = 24,     /*!< TIM1 Break Interrupt                                 */
+  TIM1_UP_IRQn                = 25,     /*!< TIM1 Update Interrupt                                */
+  TIM1_TRG_COM_IRQn           = 26,     /*!< TIM1 Trigger and Commutation Interrupt               */
+  TIM1_CC_IRQn                = 27,     /*!< TIM1 Capture Compare Interrupt                       */
+  TIM2_IRQn                   = 28,     /*!< TIM2 global Interrupt                                */
+  TIM3_IRQn                   = 29,     /*!< TIM3 global Interrupt                                */
+  TIM4_IRQn                   = 30,     /*!< TIM4 global Interrupt                                */
+  I2C1_EV_IRQn                = 31,     /*!< I2C1 Event Interrupt                                 */
+  I2C1_ER_IRQn                = 32,     /*!< I2C1 Error Interrupt                                 */
+  I2C2_EV_IRQn                = 33,     /*!< I2C2 Event Interrupt                                 */
+  I2C2_ER_IRQn                = 34,     /*!< I2C2 Error Interrupt                                 */
+  SPI1_IRQn                   = 35,     /*!< SPI1 global Interrupt                                */
+  SPI2_IRQn                   = 36,     /*!< SPI2 global Interrupt                                */
+  USART1_IRQn                 = 37,     /*!< USART1 global Interrupt                              */
+  USART2_IRQn                 = 38,     /*!< USART2 global Interrupt                              */
+  USART3_IRQn                 = 39,     /*!< USART3 global Interrupt                              */
+  EXTI15_10_IRQn              = 40,     /*!< External Line[15:10] Interrupts                      */
+  RTCAlarm_IRQn               = 41,     /*!< RTC Alarm through EXTI Line Interrupt                */
+  OTG_FS_WKUP_IRQn            = 42,     /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */
+  TIM5_IRQn                   = 50,     /*!< TIM5 global Interrupt                                */
+  SPI3_IRQn                   = 51,     /*!< SPI3 global Interrupt                                */
+  UART4_IRQn                  = 52,     /*!< UART4 global Interrupt                               */
+  UART5_IRQn                  = 53,     /*!< UART5 global Interrupt                               */
+  TIM6_IRQn                   = 54,     /*!< TIM6 global Interrupt                                */
+  TIM7_IRQn                   = 55,     /*!< TIM7 global Interrupt                                */
+  DMA2_Channel1_IRQn          = 56,     /*!< DMA2 Channel 1 global Interrupt                      */
+  DMA2_Channel2_IRQn          = 57,     /*!< DMA2 Channel 2 global Interrupt                      */
+  DMA2_Channel3_IRQn          = 58,     /*!< DMA2 Channel 3 global Interrupt                      */
+  DMA2_Channel4_IRQn          = 59,     /*!< DMA2 Channel 4 global Interrupt                      */
+  DMA2_Channel5_IRQn          = 60,     /*!< DMA2 Channel 5 global Interrupt                      */
+  ETH_IRQn                    = 61,     /*!< Ethernet global Interrupt                            */
+  ETH_WKUP_IRQn               = 62,     /*!< Ethernet Wakeup through EXTI line Interrupt          */
+  CAN2_TX_IRQn                = 63,     /*!< CAN2 TX Interrupt                                    */
+  CAN2_RX0_IRQn               = 64,     /*!< CAN2 RX0 Interrupt                                   */
+  CAN2_RX1_IRQn               = 65,     /*!< CAN2 RX1 Interrupt                                   */
+  CAN2_SCE_IRQn               = 66,     /*!< CAN2 SCE Interrupt                                   */
+  OTG_FS_IRQn                 = 67      /*!< USB OTG FS global Interrupt                          */
+#endif /* STM32F10X_CL */     
+} IRQn_Type;
+
+/**
+  * @}
+  */
+
+#include "core_cm3.h"
+#include "system_stm32f10x.h"
+#include 
+
+/** @addtogroup Exported_types
+  * @{
+  */  
+
+/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */
+typedef int32_t  s32;
+typedef int16_t s16;
+typedef int8_t  s8;
+
+typedef const int32_t sc32;  /*!< Read Only */
+typedef const int16_t sc16;  /*!< Read Only */
+typedef const int8_t sc8;   /*!< Read Only */
+
+typedef __IO int32_t  vs32;
+typedef __IO int16_t  vs16;
+typedef __IO int8_t   vs8;
+
+typedef __I int32_t vsc32;  /*!< Read Only */
+typedef __I int16_t vsc16;  /*!< Read Only */
+typedef __I int8_t vsc8;   /*!< Read Only */
+
+typedef uint32_t  u32;
+typedef uint16_t u16;
+typedef uint8_t  u8;
+
+typedef const uint32_t uc32;  /*!< Read Only */
+typedef const uint16_t uc16;  /*!< Read Only */
+typedef const uint8_t uc8;   /*!< Read Only */
+
+typedef __IO uint32_t  vu32;
+typedef __IO uint16_t vu16;
+typedef __IO uint8_t  vu8;
+
+typedef __I uint32_t vuc32;  /*!< Read Only */
+typedef __I uint16_t vuc16;  /*!< Read Only */
+typedef __I uint8_t vuc8;   /*!< Read Only */
+
+typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
+
+typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
+
+/*!< STM32F10x Standard Peripheral Library old definitions (maintained for legacy purpose) */
+#define HSEStartUp_TimeOut   HSE_STARTUP_TIMEOUT
+#define HSE_Value            HSE_VALUE
+#define HSI_Value            HSI_VALUE
+/**
+  * @}
+  */
+
+/** @addtogroup Peripheral_registers_structures
+  * @{
+  */   
+
+/** 
+  * @brief Analog to Digital Converter  
+  */
+
+typedef struct
+{
+  __IO uint32_t SR;
+  __IO uint32_t CR1;
+  __IO uint32_t CR2;
+  __IO uint32_t SMPR1;
+  __IO uint32_t SMPR2;
+  __IO uint32_t JOFR1;
+  __IO uint32_t JOFR2;
+  __IO uint32_t JOFR3;
+  __IO uint32_t JOFR4;
+  __IO uint32_t HTR;
+  __IO uint32_t LTR;
+  __IO uint32_t SQR1;
+  __IO uint32_t SQR2;
+  __IO uint32_t SQR3;
+  __IO uint32_t JSQR;
+  __IO uint32_t JDR1;
+  __IO uint32_t JDR2;
+  __IO uint32_t JDR3;
+  __IO uint32_t JDR4;
+  __IO uint32_t DR;
+} ADC_TypeDef;
+
+/** 
+  * @brief Backup Registers  
+  */
+
+typedef struct
+{
+  uint32_t  RESERVED0;
+  __IO uint16_t DR1;
+  uint16_t  RESERVED1;
+  __IO uint16_t DR2;
+  uint16_t  RESERVED2;
+  __IO uint16_t DR3;
+  uint16_t  RESERVED3;
+  __IO uint16_t DR4;
+  uint16_t  RESERVED4;
+  __IO uint16_t DR5;
+  uint16_t  RESERVED5;
+  __IO uint16_t DR6;
+  uint16_t  RESERVED6;
+  __IO uint16_t DR7;
+  uint16_t  RESERVED7;
+  __IO uint16_t DR8;
+  uint16_t  RESERVED8;
+  __IO uint16_t DR9;
+  uint16_t  RESERVED9;
+  __IO uint16_t DR10;
+  uint16_t  RESERVED10; 
+  __IO uint16_t RTCCR;
+  uint16_t  RESERVED11;
+  __IO uint16_t CR;
+  uint16_t  RESERVED12;
+  __IO uint16_t CSR;
+  uint16_t  RESERVED13[5];
+  __IO uint16_t DR11;
+  uint16_t  RESERVED14;
+  __IO uint16_t DR12;
+  uint16_t  RESERVED15;
+  __IO uint16_t DR13;
+  uint16_t  RESERVED16;
+  __IO uint16_t DR14;
+  uint16_t  RESERVED17;
+  __IO uint16_t DR15;
+  uint16_t  RESERVED18;
+  __IO uint16_t DR16;
+  uint16_t  RESERVED19;
+  __IO uint16_t DR17;
+  uint16_t  RESERVED20;
+  __IO uint16_t DR18;
+  uint16_t  RESERVED21;
+  __IO uint16_t DR19;
+  uint16_t  RESERVED22;
+  __IO uint16_t DR20;
+  uint16_t  RESERVED23;
+  __IO uint16_t DR21;
+  uint16_t  RESERVED24;
+  __IO uint16_t DR22;
+  uint16_t  RESERVED25;
+  __IO uint16_t DR23;
+  uint16_t  RESERVED26;
+  __IO uint16_t DR24;
+  uint16_t  RESERVED27;
+  __IO uint16_t DR25;
+  uint16_t  RESERVED28;
+  __IO uint16_t DR26;
+  uint16_t  RESERVED29;
+  __IO uint16_t DR27;
+  uint16_t  RESERVED30;
+  __IO uint16_t DR28;
+  uint16_t  RESERVED31;
+  __IO uint16_t DR29;
+  uint16_t  RESERVED32;
+  __IO uint16_t DR30;
+  uint16_t  RESERVED33; 
+  __IO uint16_t DR31;
+  uint16_t  RESERVED34;
+  __IO uint16_t DR32;
+  uint16_t  RESERVED35;
+  __IO uint16_t DR33;
+  uint16_t  RESERVED36;
+  __IO uint16_t DR34;
+  uint16_t  RESERVED37;
+  __IO uint16_t DR35;
+  uint16_t  RESERVED38;
+  __IO uint16_t DR36;
+  uint16_t  RESERVED39;
+  __IO uint16_t DR37;
+  uint16_t  RESERVED40;
+  __IO uint16_t DR38;
+  uint16_t  RESERVED41;
+  __IO uint16_t DR39;
+  uint16_t  RESERVED42;
+  __IO uint16_t DR40;
+  uint16_t  RESERVED43;
+  __IO uint16_t DR41;
+  uint16_t  RESERVED44;
+  __IO uint16_t DR42;
+  uint16_t  RESERVED45;    
+} BKP_TypeDef;
+  
+/** 
+  * @brief Controller Area Network TxMailBox 
+  */
+
+typedef struct
+{
+  __IO uint32_t TIR;
+  __IO uint32_t TDTR;
+  __IO uint32_t TDLR;
+  __IO uint32_t TDHR;
+} CAN_TxMailBox_TypeDef;
+
+/** 
+  * @brief Controller Area Network FIFOMailBox 
+  */
+  
+typedef struct
+{
+  __IO uint32_t RIR;
+  __IO uint32_t RDTR;
+  __IO uint32_t RDLR;
+  __IO uint32_t RDHR;
+} CAN_FIFOMailBox_TypeDef;
+
+/** 
+  * @brief Controller Area Network FilterRegister 
+  */
+  
+typedef struct
+{
+  __IO uint32_t FR1;
+  __IO uint32_t FR2;
+} CAN_FilterRegister_TypeDef;
+
+/** 
+  * @brief Controller Area Network 
+  */
+  
+typedef struct
+{
+  __IO uint32_t MCR;
+  __IO uint32_t MSR;
+  __IO uint32_t TSR;
+  __IO uint32_t RF0R;
+  __IO uint32_t RF1R;
+  __IO uint32_t IER;
+  __IO uint32_t ESR;
+  __IO uint32_t BTR;
+  uint32_t  RESERVED0[88];
+  CAN_TxMailBox_TypeDef sTxMailBox[3];
+  CAN_FIFOMailBox_TypeDef sFIFOMailBox[2];
+  uint32_t  RESERVED1[12];
+  __IO uint32_t FMR;
+  __IO uint32_t FM1R;
+  uint32_t  RESERVED2;
+  __IO uint32_t FS1R;
+  uint32_t  RESERVED3;
+  __IO uint32_t FFA1R;
+  uint32_t  RESERVED4;
+  __IO uint32_t FA1R;
+  uint32_t  RESERVED5[8];
+#ifndef STM32F10X_CL
+  CAN_FilterRegister_TypeDef sFilterRegister[14];
+#else
+  CAN_FilterRegister_TypeDef sFilterRegister[28];
+#endif /* STM32F10X_CL */  
+} CAN_TypeDef;
+
+/** 
+  * @brief Consumer Electronics Control (CEC)
+  */
+typedef struct
+{
+  __IO uint32_t CFGR;
+  __IO uint32_t OAR;
+  __IO uint32_t PRES;
+  __IO uint32_t ESR;
+  __IO uint32_t CSR;
+  __IO uint32_t TXD;
+  __IO uint32_t RXD;  
+} CEC_TypeDef;
+
+/** 
+  * @brief CRC calculation unit 
+  */
+
+typedef struct
+{
+  __IO uint32_t DR;
+  __IO uint8_t  IDR;
+  uint8_t   RESERVED0;
+  uint16_t  RESERVED1;
+  __IO uint32_t CR;
+} CRC_TypeDef;
+
+/** 
+  * @brief Digital to Analog Converter
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;
+  __IO uint32_t SWTRIGR;
+  __IO uint32_t DHR12R1;
+  __IO uint32_t DHR12L1;
+  __IO uint32_t DHR8R1;
+  __IO uint32_t DHR12R2;
+  __IO uint32_t DHR12L2;
+  __IO uint32_t DHR8R2;
+  __IO uint32_t DHR12RD;
+  __IO uint32_t DHR12LD;
+  __IO uint32_t DHR8RD;
+  __IO uint32_t DOR1;
+  __IO uint32_t DOR2;
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+  __IO uint32_t SR;
+#endif
+} DAC_TypeDef;
+
+/** 
+  * @brief Debug MCU
+  */
+
+typedef struct
+{
+  __IO uint32_t IDCODE;
+  __IO uint32_t CR;	
+}DBGMCU_TypeDef;
+
+/** 
+  * @brief DMA Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t CCR;
+  __IO uint32_t CNDTR;
+  __IO uint32_t CPAR;
+  __IO uint32_t CMAR;
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+  __IO uint32_t ISR;
+  __IO uint32_t IFCR;
+} DMA_TypeDef;
+
+/** 
+  * @brief Ethernet MAC
+  */
+
+typedef struct
+{
+  __IO uint32_t MACCR;
+  __IO uint32_t MACFFR;
+  __IO uint32_t MACHTHR;
+  __IO uint32_t MACHTLR;
+  __IO uint32_t MACMIIAR;
+  __IO uint32_t MACMIIDR;
+  __IO uint32_t MACFCR;
+  __IO uint32_t MACVLANTR;             /*    8 */
+       uint32_t RESERVED0[2];
+  __IO uint32_t MACRWUFFR;             /*   11 */
+  __IO uint32_t MACPMTCSR;
+       uint32_t RESERVED1[2];
+  __IO uint32_t MACSR;                 /*   15 */
+  __IO uint32_t MACIMR;
+  __IO uint32_t MACA0HR;
+  __IO uint32_t MACA0LR;
+  __IO uint32_t MACA1HR;
+  __IO uint32_t MACA1LR;
+  __IO uint32_t MACA2HR;
+  __IO uint32_t MACA2LR;
+  __IO uint32_t MACA3HR;
+  __IO uint32_t MACA3LR;               /*   24 */
+       uint32_t RESERVED2[40];
+  __IO uint32_t MMCCR;                 /*   65 */
+  __IO uint32_t MMCRIR;
+  __IO uint32_t MMCTIR;
+  __IO uint32_t MMCRIMR;
+  __IO uint32_t MMCTIMR;               /*   69 */
+       uint32_t RESERVED3[14];
+  __IO uint32_t MMCTGFSCCR;            /*   84 */
+  __IO uint32_t MMCTGFMSCCR;
+       uint32_t RESERVED4[5];
+  __IO uint32_t MMCTGFCR;
+       uint32_t RESERVED5[10];
+  __IO uint32_t MMCRFCECR;
+  __IO uint32_t MMCRFAECR;
+       uint32_t RESERVED6[10];
+  __IO uint32_t MMCRGUFCR;
+       uint32_t RESERVED7[334];
+  __IO uint32_t PTPTSCR;
+  __IO uint32_t PTPSSIR;
+  __IO uint32_t PTPTSHR;
+  __IO uint32_t PTPTSLR;
+  __IO uint32_t PTPTSHUR;
+  __IO uint32_t PTPTSLUR;
+  __IO uint32_t PTPTSAR;
+  __IO uint32_t PTPTTHR;
+  __IO uint32_t PTPTTLR;
+       uint32_t RESERVED8[567];
+  __IO uint32_t DMABMR;
+  __IO uint32_t DMATPDR;
+  __IO uint32_t DMARPDR;
+  __IO uint32_t DMARDLAR;
+  __IO uint32_t DMATDLAR;
+  __IO uint32_t DMASR;
+  __IO uint32_t DMAOMR;
+  __IO uint32_t DMAIER;
+  __IO uint32_t DMAMFBOCR;
+       uint32_t RESERVED9[9];
+  __IO uint32_t DMACHTDR;
+  __IO uint32_t DMACHRDR;
+  __IO uint32_t DMACHTBAR;
+  __IO uint32_t DMACHRBAR;
+} ETH_TypeDef;
+
+/** 
+  * @brief External Interrupt/Event Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t IMR;
+  __IO uint32_t EMR;
+  __IO uint32_t RTSR;
+  __IO uint32_t FTSR;
+  __IO uint32_t SWIER;
+  __IO uint32_t PR;
+} EXTI_TypeDef;
+
+/** 
+  * @brief FLASH Registers
+  */
+
+typedef struct
+{
+  __IO uint32_t ACR;
+  __IO uint32_t KEYR;
+  __IO uint32_t OPTKEYR;
+  __IO uint32_t SR;
+  __IO uint32_t CR;
+  __IO uint32_t AR;
+  __IO uint32_t RESERVED;
+  __IO uint32_t OBR;
+  __IO uint32_t WRPR;
+#ifdef STM32F10X_XL
+  uint32_t RESERVED1[8]; 
+  __IO uint32_t KEYR2;
+  uint32_t RESERVED2;   
+  __IO uint32_t SR2;
+  __IO uint32_t CR2;
+  __IO uint32_t AR2; 
+#endif /* STM32F10X_XL */  
+} FLASH_TypeDef;
+
+/** 
+  * @brief Option Bytes Registers
+  */
+  
+typedef struct
+{
+  __IO uint16_t RDP;
+  __IO uint16_t USER;
+  __IO uint16_t Data0;
+  __IO uint16_t Data1;
+  __IO uint16_t WRP0;
+  __IO uint16_t WRP1;
+  __IO uint16_t WRP2;
+  __IO uint16_t WRP3;
+} OB_TypeDef;
+
+/** 
+  * @brief Flexible Static Memory Controller
+  */
+
+typedef struct
+{
+  __IO uint32_t BTCR[8];   
+} FSMC_Bank1_TypeDef; 
+
+/** 
+  * @brief Flexible Static Memory Controller Bank1E
+  */
+  
+typedef struct
+{
+  __IO uint32_t BWTR[7];
+} FSMC_Bank1E_TypeDef;
+
+/** 
+  * @brief Flexible Static Memory Controller Bank2
+  */
+  
+typedef struct
+{
+  __IO uint32_t PCR2;
+  __IO uint32_t SR2;
+  __IO uint32_t PMEM2;
+  __IO uint32_t PATT2;
+  uint32_t  RESERVED0;   
+  __IO uint32_t ECCR2; 
+} FSMC_Bank2_TypeDef;  
+
+/** 
+  * @brief Flexible Static Memory Controller Bank3
+  */
+  
+typedef struct
+{
+  __IO uint32_t PCR3;
+  __IO uint32_t SR3;
+  __IO uint32_t PMEM3;
+  __IO uint32_t PATT3;
+  uint32_t  RESERVED0;   
+  __IO uint32_t ECCR3; 
+} FSMC_Bank3_TypeDef; 
+
+/** 
+  * @brief Flexible Static Memory Controller Bank4
+  */
+  
+typedef struct
+{
+  __IO uint32_t PCR4;
+  __IO uint32_t SR4;
+  __IO uint32_t PMEM4;
+  __IO uint32_t PATT4;
+  __IO uint32_t PIO4; 
+} FSMC_Bank4_TypeDef; 
+
+/** 
+  * @brief General Purpose I/O
+  */
+
+typedef struct
+{
+  __IO uint32_t CRL;
+  __IO uint32_t CRH;
+  __IO uint32_t IDR;
+  __IO uint32_t ODR;
+  __IO uint32_t BSRR;
+  __IO uint32_t BRR;
+  __IO uint32_t LCKR;
+} GPIO_TypeDef;
+
+/** 
+  * @brief Alternate Function I/O
+  */
+
+typedef struct
+{
+  __IO uint32_t EVCR;
+  __IO uint32_t MAPR;
+  __IO uint32_t EXTICR[4];
+  uint32_t RESERVED0;
+  __IO uint32_t MAPR2;  
+} AFIO_TypeDef;
+/** 
+  * @brief Inter Integrated Circuit Interface
+  */
+
+typedef struct
+{
+  __IO uint16_t CR1;
+  uint16_t  RESERVED0;
+  __IO uint16_t CR2;
+  uint16_t  RESERVED1;
+  __IO uint16_t OAR1;
+  uint16_t  RESERVED2;
+  __IO uint16_t OAR2;
+  uint16_t  RESERVED3;
+  __IO uint16_t DR;
+  uint16_t  RESERVED4;
+  __IO uint16_t SR1;
+  uint16_t  RESERVED5;
+  __IO uint16_t SR2;
+  uint16_t  RESERVED6;
+  __IO uint16_t CCR;
+  uint16_t  RESERVED7;
+  __IO uint16_t TRISE;
+  uint16_t  RESERVED8;
+} I2C_TypeDef;
+
+/** 
+  * @brief Independent WATCHDOG
+  */
+
+typedef struct
+{
+  __IO uint32_t KR;
+  __IO uint32_t PR;
+  __IO uint32_t RLR;
+  __IO uint32_t SR;
+} IWDG_TypeDef;
+
+/** 
+  * @brief Power Control
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;
+  __IO uint32_t CSR;
+} PWR_TypeDef;
+
+/** 
+  * @brief Reset and Clock Control
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;
+  __IO uint32_t CFGR;
+  __IO uint32_t CIR;
+  __IO uint32_t APB2RSTR;
+  __IO uint32_t APB1RSTR;
+  __IO uint32_t AHBENR;
+  __IO uint32_t APB2ENR;
+  __IO uint32_t APB1ENR;
+  __IO uint32_t BDCR;
+  __IO uint32_t CSR;
+
+#ifdef STM32F10X_CL  
+  __IO uint32_t AHBRSTR;
+  __IO uint32_t CFGR2;
+#endif /* STM32F10X_CL */ 
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)   
+  uint32_t RESERVED0;
+  __IO uint32_t CFGR2;
+#endif /* STM32F10X_LD_VL || STM32F10X_MD_VL || STM32F10X_HD_VL */ 
+} RCC_TypeDef;
+
+/** 
+  * @brief Real-Time Clock
+  */
+
+typedef struct
+{
+  __IO uint16_t CRH;
+  uint16_t  RESERVED0;
+  __IO uint16_t CRL;
+  uint16_t  RESERVED1;
+  __IO uint16_t PRLH;
+  uint16_t  RESERVED2;
+  __IO uint16_t PRLL;
+  uint16_t  RESERVED3;
+  __IO uint16_t DIVH;
+  uint16_t  RESERVED4;
+  __IO uint16_t DIVL;
+  uint16_t  RESERVED5;
+  __IO uint16_t CNTH;
+  uint16_t  RESERVED6;
+  __IO uint16_t CNTL;
+  uint16_t  RESERVED7;
+  __IO uint16_t ALRH;
+  uint16_t  RESERVED8;
+  __IO uint16_t ALRL;
+  uint16_t  RESERVED9;
+} RTC_TypeDef;
+
+/** 
+  * @brief SD host Interface
+  */
+
+typedef struct
+{
+  __IO uint32_t POWER;
+  __IO uint32_t CLKCR;
+  __IO uint32_t ARG;
+  __IO uint32_t CMD;
+  __I uint32_t RESPCMD;
+  __I uint32_t RESP1;
+  __I uint32_t RESP2;
+  __I uint32_t RESP3;
+  __I uint32_t RESP4;
+  __IO uint32_t DTIMER;
+  __IO uint32_t DLEN;
+  __IO uint32_t DCTRL;
+  __I uint32_t DCOUNT;
+  __I uint32_t STA;
+  __IO uint32_t ICR;
+  __IO uint32_t MASK;
+  uint32_t  RESERVED0[2];
+  __I uint32_t FIFOCNT;
+  uint32_t  RESERVED1[13];
+  __IO uint32_t FIFO;
+} SDIO_TypeDef;
+
+/** 
+  * @brief Serial Peripheral Interface
+  */
+
+typedef struct
+{
+  __IO uint16_t CR1;
+  uint16_t  RESERVED0;
+  __IO uint16_t CR2;
+  uint16_t  RESERVED1;
+  __IO uint16_t SR;
+  uint16_t  RESERVED2;
+  __IO uint16_t DR;
+  uint16_t  RESERVED3;
+  __IO uint16_t CRCPR;
+  uint16_t  RESERVED4;
+  __IO uint16_t RXCRCR;
+  uint16_t  RESERVED5;
+  __IO uint16_t TXCRCR;
+  uint16_t  RESERVED6;
+  __IO uint16_t I2SCFGR;
+  uint16_t  RESERVED7;
+  __IO uint16_t I2SPR;
+  uint16_t  RESERVED8;  
+} SPI_TypeDef;
+
+/** 
+  * @brief TIM
+  */
+
+typedef struct
+{
+  __IO uint16_t CR1;
+  uint16_t  RESERVED0;
+  __IO uint16_t CR2;
+  uint16_t  RESERVED1;
+  __IO uint16_t SMCR;
+  uint16_t  RESERVED2;
+  __IO uint16_t DIER;
+  uint16_t  RESERVED3;
+  __IO uint16_t SR;
+  uint16_t  RESERVED4;
+  __IO uint16_t EGR;
+  uint16_t  RESERVED5;
+  __IO uint16_t CCMR1;
+  uint16_t  RESERVED6;
+  __IO uint16_t CCMR2;
+  uint16_t  RESERVED7;
+  __IO uint16_t CCER;
+  uint16_t  RESERVED8;
+  __IO uint16_t CNT;
+  uint16_t  RESERVED9;
+  __IO uint16_t PSC;
+  uint16_t  RESERVED10;
+  __IO uint16_t ARR;
+  uint16_t  RESERVED11;
+  __IO uint16_t RCR;
+  uint16_t  RESERVED12;
+  __IO uint16_t CCR1;
+  uint16_t  RESERVED13;
+  __IO uint16_t CCR2;
+  uint16_t  RESERVED14;
+  __IO uint16_t CCR3;
+  uint16_t  RESERVED15;
+  __IO uint16_t CCR4;
+  uint16_t  RESERVED16;
+  __IO uint16_t BDTR;
+  uint16_t  RESERVED17;
+  __IO uint16_t DCR;
+  uint16_t  RESERVED18;
+  __IO uint16_t DMAR;
+  uint16_t  RESERVED19;
+} TIM_TypeDef;
+
+/** 
+  * @brief Universal Synchronous Asynchronous Receiver Transmitter
+  */
+ 
+typedef struct
+{
+  __IO uint16_t SR;
+  uint16_t  RESERVED0;
+  __IO uint16_t DR;
+  uint16_t  RESERVED1;
+  __IO uint16_t BRR;
+  uint16_t  RESERVED2;
+  __IO uint16_t CR1;
+  uint16_t  RESERVED3;
+  __IO uint16_t CR2;
+  uint16_t  RESERVED4;
+  __IO uint16_t CR3;
+  uint16_t  RESERVED5;
+  __IO uint16_t GTPR;
+  uint16_t  RESERVED6;
+} USART_TypeDef;
+
+/** 
+  * @brief Window WATCHDOG
+  */
+
+typedef struct
+{
+  __IO uint32_t CR;
+  __IO uint32_t CFR;
+  __IO uint32_t SR;
+} WWDG_TypeDef;
+
+/**
+  * @}
+  */
+  
+/** @addtogroup Peripheral_memory_map
+  * @{
+  */
+
+
+#define FLASH_BASE            ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE             ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE           ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+#define SRAM_BB_BASE          ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */
+#define PERIPH_BB_BASE        ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+
+#define FSMC_R_BASE           ((uint32_t)0xA0000000) /*!< FSMC registers base address */
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE       PERIPH_BASE
+#define APB2PERIPH_BASE       (PERIPH_BASE + 0x10000)
+#define AHBPERIPH_BASE        (PERIPH_BASE + 0x20000)
+
+#define TIM2_BASE             (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE             (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE             (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE             (APB1PERIPH_BASE + 0x0C00)
+#define TIM6_BASE             (APB1PERIPH_BASE + 0x1000)
+#define TIM7_BASE             (APB1PERIPH_BASE + 0x1400)
+#define TIM12_BASE            (APB1PERIPH_BASE + 0x1800)
+#define TIM13_BASE            (APB1PERIPH_BASE + 0x1C00)
+#define TIM14_BASE            (APB1PERIPH_BASE + 0x2000)
+#define RTC_BASE              (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE             (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE             (APB1PERIPH_BASE + 0x3000)
+#define SPI2_BASE             (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE             (APB1PERIPH_BASE + 0x3C00)
+#define USART2_BASE           (APB1PERIPH_BASE + 0x4400)
+#define USART3_BASE           (APB1PERIPH_BASE + 0x4800)
+#define UART4_BASE            (APB1PERIPH_BASE + 0x4C00)
+#define UART5_BASE            (APB1PERIPH_BASE + 0x5000)
+#define I2C1_BASE             (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE             (APB1PERIPH_BASE + 0x5800)
+#define CAN1_BASE             (APB1PERIPH_BASE + 0x6400)
+#define CAN2_BASE             (APB1PERIPH_BASE + 0x6800)
+#define BKP_BASE              (APB1PERIPH_BASE + 0x6C00)
+#define PWR_BASE              (APB1PERIPH_BASE + 0x7000)
+#define DAC_BASE              (APB1PERIPH_BASE + 0x7400)
+#define CEC_BASE              (APB1PERIPH_BASE + 0x7800)
+
+#define AFIO_BASE             (APB2PERIPH_BASE + 0x0000)
+#define EXTI_BASE             (APB2PERIPH_BASE + 0x0400)
+#define GPIOA_BASE            (APB2PERIPH_BASE + 0x0800)
+#define GPIOB_BASE            (APB2PERIPH_BASE + 0x0C00)
+#define GPIOC_BASE            (APB2PERIPH_BASE + 0x1000)
+#define GPIOD_BASE            (APB2PERIPH_BASE + 0x1400)
+#define GPIOE_BASE            (APB2PERIPH_BASE + 0x1800)
+#define GPIOF_BASE            (APB2PERIPH_BASE + 0x1C00)
+#define GPIOG_BASE            (APB2PERIPH_BASE + 0x2000)
+#define ADC1_BASE             (APB2PERIPH_BASE + 0x2400)
+#define ADC2_BASE             (APB2PERIPH_BASE + 0x2800)
+#define TIM1_BASE             (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE             (APB2PERIPH_BASE + 0x3000)
+#define TIM8_BASE             (APB2PERIPH_BASE + 0x3400)
+#define USART1_BASE           (APB2PERIPH_BASE + 0x3800)
+#define ADC3_BASE             (APB2PERIPH_BASE + 0x3C00)
+#define TIM15_BASE            (APB2PERIPH_BASE + 0x4000)
+#define TIM16_BASE            (APB2PERIPH_BASE + 0x4400)
+#define TIM17_BASE            (APB2PERIPH_BASE + 0x4800)
+#define TIM9_BASE             (APB2PERIPH_BASE + 0x4C00)
+#define TIM10_BASE            (APB2PERIPH_BASE + 0x5000)
+#define TIM11_BASE            (APB2PERIPH_BASE + 0x5400)
+
+#define SDIO_BASE             (PERIPH_BASE + 0x18000)
+
+#define DMA1_BASE             (AHBPERIPH_BASE + 0x0000)
+#define DMA1_Channel1_BASE    (AHBPERIPH_BASE + 0x0008)
+#define DMA1_Channel2_BASE    (AHBPERIPH_BASE + 0x001C)
+#define DMA1_Channel3_BASE    (AHBPERIPH_BASE + 0x0030)
+#define DMA1_Channel4_BASE    (AHBPERIPH_BASE + 0x0044)
+#define DMA1_Channel5_BASE    (AHBPERIPH_BASE + 0x0058)
+#define DMA1_Channel6_BASE    (AHBPERIPH_BASE + 0x006C)
+#define DMA1_Channel7_BASE    (AHBPERIPH_BASE + 0x0080)
+#define DMA2_BASE             (AHBPERIPH_BASE + 0x0400)
+#define DMA2_Channel1_BASE    (AHBPERIPH_BASE + 0x0408)
+#define DMA2_Channel2_BASE    (AHBPERIPH_BASE + 0x041C)
+#define DMA2_Channel3_BASE    (AHBPERIPH_BASE + 0x0430)
+#define DMA2_Channel4_BASE    (AHBPERIPH_BASE + 0x0444)
+#define DMA2_Channel5_BASE    (AHBPERIPH_BASE + 0x0458)
+#define RCC_BASE              (AHBPERIPH_BASE + 0x1000)
+#define CRC_BASE              (AHBPERIPH_BASE + 0x3000)
+
+#define FLASH_R_BASE          (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */
+#define OB_BASE               ((uint32_t)0x1FFFF800)    /*!< Flash Option Bytes base address */
+
+#define ETH_BASE              (AHBPERIPH_BASE + 0x8000)
+#define ETH_MAC_BASE          (ETH_BASE)
+#define ETH_MMC_BASE          (ETH_BASE + 0x0100)
+#define ETH_PTP_BASE          (ETH_BASE + 0x0700)
+#define ETH_DMA_BASE          (ETH_BASE + 0x1000)
+
+#define FSMC_Bank1_R_BASE     (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */
+#define FSMC_Bank1E_R_BASE    (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */
+#define FSMC_Bank2_R_BASE     (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */
+#define FSMC_Bank3_R_BASE     (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */
+#define FSMC_Bank4_R_BASE     (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */
+
+#define DBGMCU_BASE          ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */
+
+/**
+  * @}
+  */
+  
+/** @addtogroup Peripheral_declaration
+  * @{
+  */  
+
+#define TIM2                ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3                ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4                ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5                ((TIM_TypeDef *) TIM5_BASE)
+#define TIM6                ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7                ((TIM_TypeDef *) TIM7_BASE)
+#define TIM12               ((TIM_TypeDef *) TIM12_BASE)
+#define TIM13               ((TIM_TypeDef *) TIM13_BASE)
+#define TIM14               ((TIM_TypeDef *) TIM14_BASE)
+#define RTC                 ((RTC_TypeDef *) RTC_BASE)
+#define WWDG                ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG                ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2                ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3                ((SPI_TypeDef *) SPI3_BASE)
+#define USART2              ((USART_TypeDef *) USART2_BASE)
+#define USART3              ((USART_TypeDef *) USART3_BASE)
+#define UART4               ((USART_TypeDef *) UART4_BASE)
+#define UART5               ((USART_TypeDef *) UART5_BASE)
+#define I2C1                ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2                ((I2C_TypeDef *) I2C2_BASE)
+#define CAN1                ((CAN_TypeDef *) CAN1_BASE)
+#define CAN2                ((CAN_TypeDef *) CAN2_BASE)
+#define BKP                 ((BKP_TypeDef *) BKP_BASE)
+#define PWR                 ((PWR_TypeDef *) PWR_BASE)
+#define DAC                 ((DAC_TypeDef *) DAC_BASE)
+#define CEC                 ((CEC_TypeDef *) CEC_BASE)
+#define AFIO                ((AFIO_TypeDef *) AFIO_BASE)
+#define EXTI                ((EXTI_TypeDef *) EXTI_BASE)
+#define GPIOA               ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB               ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC               ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD               ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE               ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF               ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG               ((GPIO_TypeDef *) GPIOG_BASE)
+#define ADC1                ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2                ((ADC_TypeDef *) ADC2_BASE)
+#define TIM1                ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1                ((SPI_TypeDef *) SPI1_BASE)
+#define TIM8                ((TIM_TypeDef *) TIM8_BASE)
+#define USART1              ((USART_TypeDef *) USART1_BASE)
+#define ADC3                ((ADC_TypeDef *) ADC3_BASE)
+#define TIM15               ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16               ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17               ((TIM_TypeDef *) TIM17_BASE)
+#define TIM9                ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10               ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11               ((TIM_TypeDef *) TIM11_BASE)
+#define SDIO                ((SDIO_TypeDef *) SDIO_BASE)
+#define DMA1                ((DMA_TypeDef *) DMA1_BASE)
+#define DMA2                ((DMA_TypeDef *) DMA2_BASE)
+#define DMA1_Channel1       ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2       ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3       ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4       ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5       ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6       ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7       ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define DMA2_Channel1       ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE)
+#define DMA2_Channel2       ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE)
+#define DMA2_Channel3       ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE)
+#define DMA2_Channel4       ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE)
+#define DMA2_Channel5       ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE)
+#define RCC                 ((RCC_TypeDef *) RCC_BASE)
+#define CRC                 ((CRC_TypeDef *) CRC_BASE)
+#define FLASH               ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB                  ((OB_TypeDef *) OB_BASE) 
+#define ETH                 ((ETH_TypeDef *) ETH_BASE)
+#define FSMC_Bank1          ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE)
+#define FSMC_Bank1E         ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE)
+#define FSMC_Bank2          ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE)
+#define FSMC_Bank3          ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE)
+#define FSMC_Bank4          ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE)
+#define DBGMCU              ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_constants
+  * @{
+  */
+  
+  /** @addtogroup Peripheral_Registers_Bits_Definition
+  * @{
+  */
+    
+/******************************************************************************/
+/*                         Peripheral Registers_Bits_Definition               */
+/******************************************************************************/
+
+/******************************************************************************/
+/*                                                                            */
+/*                          CRC calculation unit                              */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for CRC_DR register  *********************/
+#define  CRC_DR_DR                           ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+
+/*******************  Bit definition for CRC_IDR register  ********************/
+#define  CRC_IDR_IDR                         ((uint8_t)0xFF)        /*!< General-purpose 8-bit data register bits */
+
+
+/********************  Bit definition for CRC_CR register  ********************/
+#define  CRC_CR_RESET                        ((uint8_t)0x01)        /*!< RESET bit */
+
+/******************************************************************************/
+/*                                                                            */
+/*                             Power Control                                  */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for PWR_CR register  ********************/
+#define  PWR_CR_LPDS                         ((uint16_t)0x0001)     /*!< Low-Power Deepsleep */
+#define  PWR_CR_PDDS                         ((uint16_t)0x0002)     /*!< Power Down Deepsleep */
+#define  PWR_CR_CWUF                         ((uint16_t)0x0004)     /*!< Clear Wakeup Flag */
+#define  PWR_CR_CSBF                         ((uint16_t)0x0008)     /*!< Clear Standby Flag */
+#define  PWR_CR_PVDE                         ((uint16_t)0x0010)     /*!< Power Voltage Detector Enable */
+
+#define  PWR_CR_PLS                          ((uint16_t)0x00E0)     /*!< PLS[2:0] bits (PVD Level Selection) */
+#define  PWR_CR_PLS_0                        ((uint16_t)0x0020)     /*!< Bit 0 */
+#define  PWR_CR_PLS_1                        ((uint16_t)0x0040)     /*!< Bit 1 */
+#define  PWR_CR_PLS_2                        ((uint16_t)0x0080)     /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define  PWR_CR_PLS_2V2                      ((uint16_t)0x0000)     /*!< PVD level 2.2V */
+#define  PWR_CR_PLS_2V3                      ((uint16_t)0x0020)     /*!< PVD level 2.3V */
+#define  PWR_CR_PLS_2V4                      ((uint16_t)0x0040)     /*!< PVD level 2.4V */
+#define  PWR_CR_PLS_2V5                      ((uint16_t)0x0060)     /*!< PVD level 2.5V */
+#define  PWR_CR_PLS_2V6                      ((uint16_t)0x0080)     /*!< PVD level 2.6V */
+#define  PWR_CR_PLS_2V7                      ((uint16_t)0x00A0)     /*!< PVD level 2.7V */
+#define  PWR_CR_PLS_2V8                      ((uint16_t)0x00C0)     /*!< PVD level 2.8V */
+#define  PWR_CR_PLS_2V9                      ((uint16_t)0x00E0)     /*!< PVD level 2.9V */
+
+#define  PWR_CR_DBP                          ((uint16_t)0x0100)     /*!< Disable Backup Domain write protection */
+
+
+/*******************  Bit definition for PWR_CSR register  ********************/
+#define  PWR_CSR_WUF                         ((uint16_t)0x0001)     /*!< Wakeup Flag */
+#define  PWR_CSR_SBF                         ((uint16_t)0x0002)     /*!< Standby Flag */
+#define  PWR_CSR_PVDO                        ((uint16_t)0x0004)     /*!< PVD Output */
+#define  PWR_CSR_EWUP                        ((uint16_t)0x0100)     /*!< Enable WKUP pin */
+
+/******************************************************************************/
+/*                                                                            */
+/*                            Backup registers                                */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for BKP_DR1 register  ********************/
+#define  BKP_DR1_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR2 register  ********************/
+#define  BKP_DR2_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR3 register  ********************/
+#define  BKP_DR3_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR4 register  ********************/
+#define  BKP_DR4_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR5 register  ********************/
+#define  BKP_DR5_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR6 register  ********************/
+#define  BKP_DR6_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR7 register  ********************/
+#define  BKP_DR7_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR8 register  ********************/
+#define  BKP_DR8_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR9 register  ********************/
+#define  BKP_DR9_D                           ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR10 register  *******************/
+#define  BKP_DR10_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR11 register  *******************/
+#define  BKP_DR11_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR12 register  *******************/
+#define  BKP_DR12_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR13 register  *******************/
+#define  BKP_DR13_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR14 register  *******************/
+#define  BKP_DR14_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR15 register  *******************/
+#define  BKP_DR15_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR16 register  *******************/
+#define  BKP_DR16_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR17 register  *******************/
+#define  BKP_DR17_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/******************  Bit definition for BKP_DR18 register  ********************/
+#define  BKP_DR18_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR19 register  *******************/
+#define  BKP_DR19_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR20 register  *******************/
+#define  BKP_DR20_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR21 register  *******************/
+#define  BKP_DR21_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR22 register  *******************/
+#define  BKP_DR22_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR23 register  *******************/
+#define  BKP_DR23_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR24 register  *******************/
+#define  BKP_DR24_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR25 register  *******************/
+#define  BKP_DR25_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR26 register  *******************/
+#define  BKP_DR26_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR27 register  *******************/
+#define  BKP_DR27_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR28 register  *******************/
+#define  BKP_DR28_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR29 register  *******************/
+#define  BKP_DR29_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR30 register  *******************/
+#define  BKP_DR30_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR31 register  *******************/
+#define  BKP_DR31_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR32 register  *******************/
+#define  BKP_DR32_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR33 register  *******************/
+#define  BKP_DR33_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR34 register  *******************/
+#define  BKP_DR34_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR35 register  *******************/
+#define  BKP_DR35_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR36 register  *******************/
+#define  BKP_DR36_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR37 register  *******************/
+#define  BKP_DR37_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR38 register  *******************/
+#define  BKP_DR38_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR39 register  *******************/
+#define  BKP_DR39_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR40 register  *******************/
+#define  BKP_DR40_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR41 register  *******************/
+#define  BKP_DR41_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/*******************  Bit definition for BKP_DR42 register  *******************/
+#define  BKP_DR42_D                          ((uint16_t)0xFFFF)     /*!< Backup data */
+
+/******************  Bit definition for BKP_RTCCR register  *******************/
+#define  BKP_RTCCR_CAL                       ((uint16_t)0x007F)     /*!< Calibration value */
+#define  BKP_RTCCR_CCO                       ((uint16_t)0x0080)     /*!< Calibration Clock Output */
+#define  BKP_RTCCR_ASOE                      ((uint16_t)0x0100)     /*!< Alarm or Second Output Enable */
+#define  BKP_RTCCR_ASOS                      ((uint16_t)0x0200)     /*!< Alarm or Second Output Selection */
+
+/********************  Bit definition for BKP_CR register  ********************/
+#define  BKP_CR_TPE                          ((uint8_t)0x01)        /*!< TAMPER pin enable */
+#define  BKP_CR_TPAL                         ((uint8_t)0x02)        /*!< TAMPER pin active level */
+
+/*******************  Bit definition for BKP_CSR register  ********************/
+#define  BKP_CSR_CTE                         ((uint16_t)0x0001)     /*!< Clear Tamper event */
+#define  BKP_CSR_CTI                         ((uint16_t)0x0002)     /*!< Clear Tamper Interrupt */
+#define  BKP_CSR_TPIE                        ((uint16_t)0x0004)     /*!< TAMPER Pin interrupt enable */
+#define  BKP_CSR_TEF                         ((uint16_t)0x0100)     /*!< Tamper Event Flag */
+#define  BKP_CSR_TIF                         ((uint16_t)0x0200)     /*!< Tamper Interrupt Flag */
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Reset and Clock Control                            */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for RCC_CR register  ********************/
+#define  RCC_CR_HSION                        ((uint32_t)0x00000001)        /*!< Internal High Speed clock enable */
+#define  RCC_CR_HSIRDY                       ((uint32_t)0x00000002)        /*!< Internal High Speed clock ready flag */
+#define  RCC_CR_HSITRIM                      ((uint32_t)0x000000F8)        /*!< Internal High Speed clock trimming */
+#define  RCC_CR_HSICAL                       ((uint32_t)0x0000FF00)        /*!< Internal High Speed clock Calibration */
+#define  RCC_CR_HSEON                        ((uint32_t)0x00010000)        /*!< External High Speed clock enable */
+#define  RCC_CR_HSERDY                       ((uint32_t)0x00020000)        /*!< External High Speed clock ready flag */
+#define  RCC_CR_HSEBYP                       ((uint32_t)0x00040000)        /*!< External High Speed clock Bypass */
+#define  RCC_CR_CSSON                        ((uint32_t)0x00080000)        /*!< Clock Security System enable */
+#define  RCC_CR_PLLON                        ((uint32_t)0x01000000)        /*!< PLL enable */
+#define  RCC_CR_PLLRDY                       ((uint32_t)0x02000000)        /*!< PLL clock ready flag */
+
+#ifdef STM32F10X_CL
+ #define  RCC_CR_PLL2ON                       ((uint32_t)0x04000000)        /*!< PLL2 enable */
+ #define  RCC_CR_PLL2RDY                      ((uint32_t)0x08000000)        /*!< PLL2 clock ready flag */
+ #define  RCC_CR_PLL3ON                       ((uint32_t)0x10000000)        /*!< PLL3 enable */
+ #define  RCC_CR_PLL3RDY                      ((uint32_t)0x20000000)        /*!< PLL3 clock ready flag */
+#endif /* STM32F10X_CL */
+
+/*******************  Bit definition for RCC_CFGR register  *******************/
+/*!< SW configuration */
+#define  RCC_CFGR_SW                         ((uint32_t)0x00000003)        /*!< SW[1:0] bits (System clock Switch) */
+#define  RCC_CFGR_SW_0                       ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  RCC_CFGR_SW_1                       ((uint32_t)0x00000002)        /*!< Bit 1 */
+
+#define  RCC_CFGR_SW_HSI                     ((uint32_t)0x00000000)        /*!< HSI selected as system clock */
+#define  RCC_CFGR_SW_HSE                     ((uint32_t)0x00000001)        /*!< HSE selected as system clock */
+#define  RCC_CFGR_SW_PLL                     ((uint32_t)0x00000002)        /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define  RCC_CFGR_SWS                        ((uint32_t)0x0000000C)        /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define  RCC_CFGR_SWS_0                      ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  RCC_CFGR_SWS_1                      ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  RCC_CFGR_SWS_HSI                    ((uint32_t)0x00000000)        /*!< HSI oscillator used as system clock */
+#define  RCC_CFGR_SWS_HSE                    ((uint32_t)0x00000004)        /*!< HSE oscillator used as system clock */
+#define  RCC_CFGR_SWS_PLL                    ((uint32_t)0x00000008)        /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define  RCC_CFGR_HPRE                       ((uint32_t)0x000000F0)        /*!< HPRE[3:0] bits (AHB prescaler) */
+#define  RCC_CFGR_HPRE_0                     ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  RCC_CFGR_HPRE_1                     ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  RCC_CFGR_HPRE_2                     ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  RCC_CFGR_HPRE_3                     ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  RCC_CFGR_HPRE_DIV1                  ((uint32_t)0x00000000)        /*!< SYSCLK not divided */
+#define  RCC_CFGR_HPRE_DIV2                  ((uint32_t)0x00000080)        /*!< SYSCLK divided by 2 */
+#define  RCC_CFGR_HPRE_DIV4                  ((uint32_t)0x00000090)        /*!< SYSCLK divided by 4 */
+#define  RCC_CFGR_HPRE_DIV8                  ((uint32_t)0x000000A0)        /*!< SYSCLK divided by 8 */
+#define  RCC_CFGR_HPRE_DIV16                 ((uint32_t)0x000000B0)        /*!< SYSCLK divided by 16 */
+#define  RCC_CFGR_HPRE_DIV64                 ((uint32_t)0x000000C0)        /*!< SYSCLK divided by 64 */
+#define  RCC_CFGR_HPRE_DIV128                ((uint32_t)0x000000D0)        /*!< SYSCLK divided by 128 */
+#define  RCC_CFGR_HPRE_DIV256                ((uint32_t)0x000000E0)        /*!< SYSCLK divided by 256 */
+#define  RCC_CFGR_HPRE_DIV512                ((uint32_t)0x000000F0)        /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define  RCC_CFGR_PPRE1                      ((uint32_t)0x00000700)        /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define  RCC_CFGR_PPRE1_0                    ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  RCC_CFGR_PPRE1_1                    ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  RCC_CFGR_PPRE1_2                    ((uint32_t)0x00000400)        /*!< Bit 2 */
+
+#define  RCC_CFGR_PPRE1_DIV1                 ((uint32_t)0x00000000)        /*!< HCLK not divided */
+#define  RCC_CFGR_PPRE1_DIV2                 ((uint32_t)0x00000400)        /*!< HCLK divided by 2 */
+#define  RCC_CFGR_PPRE1_DIV4                 ((uint32_t)0x00000500)        /*!< HCLK divided by 4 */
+#define  RCC_CFGR_PPRE1_DIV8                 ((uint32_t)0x00000600)        /*!< HCLK divided by 8 */
+#define  RCC_CFGR_PPRE1_DIV16                ((uint32_t)0x00000700)        /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define  RCC_CFGR_PPRE2                      ((uint32_t)0x00003800)        /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define  RCC_CFGR_PPRE2_0                    ((uint32_t)0x00000800)        /*!< Bit 0 */
+#define  RCC_CFGR_PPRE2_1                    ((uint32_t)0x00001000)        /*!< Bit 1 */
+#define  RCC_CFGR_PPRE2_2                    ((uint32_t)0x00002000)        /*!< Bit 2 */
+
+#define  RCC_CFGR_PPRE2_DIV1                 ((uint32_t)0x00000000)        /*!< HCLK not divided */
+#define  RCC_CFGR_PPRE2_DIV2                 ((uint32_t)0x00002000)        /*!< HCLK divided by 2 */
+#define  RCC_CFGR_PPRE2_DIV4                 ((uint32_t)0x00002800)        /*!< HCLK divided by 4 */
+#define  RCC_CFGR_PPRE2_DIV8                 ((uint32_t)0x00003000)        /*!< HCLK divided by 8 */
+#define  RCC_CFGR_PPRE2_DIV16                ((uint32_t)0x00003800)        /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define  RCC_CFGR_ADCPRE                     ((uint32_t)0x0000C000)        /*!< ADCPRE[1:0] bits (ADC prescaler) */
+#define  RCC_CFGR_ADCPRE_0                   ((uint32_t)0x00004000)        /*!< Bit 0 */
+#define  RCC_CFGR_ADCPRE_1                   ((uint32_t)0x00008000)        /*!< Bit 1 */
+
+#define  RCC_CFGR_ADCPRE_DIV2                ((uint32_t)0x00000000)        /*!< PCLK2 divided by 2 */
+#define  RCC_CFGR_ADCPRE_DIV4                ((uint32_t)0x00004000)        /*!< PCLK2 divided by 4 */
+#define  RCC_CFGR_ADCPRE_DIV6                ((uint32_t)0x00008000)        /*!< PCLK2 divided by 6 */
+#define  RCC_CFGR_ADCPRE_DIV8                ((uint32_t)0x0000C000)        /*!< PCLK2 divided by 8 */
+
+#define  RCC_CFGR_PLLSRC                     ((uint32_t)0x00010000)        /*!< PLL entry clock source */
+
+#define  RCC_CFGR_PLLXTPRE                   ((uint32_t)0x00020000)        /*!< HSE divider for PLL entry */
+
+/*!< PLLMUL configuration */
+#define  RCC_CFGR_PLLMULL                    ((uint32_t)0x003C0000)        /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define  RCC_CFGR_PLLMULL_0                  ((uint32_t)0x00040000)        /*!< Bit 0 */
+#define  RCC_CFGR_PLLMULL_1                  ((uint32_t)0x00080000)        /*!< Bit 1 */
+#define  RCC_CFGR_PLLMULL_2                  ((uint32_t)0x00100000)        /*!< Bit 2 */
+#define  RCC_CFGR_PLLMULL_3                  ((uint32_t)0x00200000)        /*!< Bit 3 */
+
+#ifdef STM32F10X_CL
+ #define  RCC_CFGR_PLLSRC_HSI_Div2           ((uint32_t)0x00000000)        /*!< HSI clock divided by 2 selected as PLL entry clock source */
+ #define  RCC_CFGR_PLLSRC_PREDIV1            ((uint32_t)0x00010000)        /*!< PREDIV1 clock selected as PLL entry clock source */
+
+ #define  RCC_CFGR_PLLXTPRE_PREDIV1          ((uint32_t)0x00000000)        /*!< PREDIV1 clock not divided for PLL entry */
+ #define  RCC_CFGR_PLLXTPRE_PREDIV1_Div2     ((uint32_t)0x00020000)        /*!< PREDIV1 clock divided by 2 for PLL entry */
+
+ #define  RCC_CFGR_PLLMULL4                  ((uint32_t)0x00080000)        /*!< PLL input clock * 4 */
+ #define  RCC_CFGR_PLLMULL5                  ((uint32_t)0x000C0000)        /*!< PLL input clock * 5 */
+ #define  RCC_CFGR_PLLMULL6                  ((uint32_t)0x00100000)        /*!< PLL input clock * 6 */
+ #define  RCC_CFGR_PLLMULL7                  ((uint32_t)0x00140000)        /*!< PLL input clock * 7 */
+ #define  RCC_CFGR_PLLMULL8                  ((uint32_t)0x00180000)        /*!< PLL input clock * 8 */
+ #define  RCC_CFGR_PLLMULL9                  ((uint32_t)0x001C0000)        /*!< PLL input clock * 9 */
+ #define  RCC_CFGR_PLLMULL6_5                ((uint32_t)0x00340000)        /*!< PLL input clock * 6.5 */
+ 
+ #define  RCC_CFGR_OTGFSPRE                  ((uint32_t)0x00400000)        /*!< USB OTG FS prescaler */
+ 
+/*!< MCO configuration */
+ #define  RCC_CFGR_MCO                       ((uint32_t)0x0F000000)        /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+ #define  RCC_CFGR_MCO_0                     ((uint32_t)0x01000000)        /*!< Bit 0 */
+ #define  RCC_CFGR_MCO_1                     ((uint32_t)0x02000000)        /*!< Bit 1 */
+ #define  RCC_CFGR_MCO_2                     ((uint32_t)0x04000000)        /*!< Bit 2 */
+ #define  RCC_CFGR_MCO_3                     ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+ #define  RCC_CFGR_MCO_NOCLOCK               ((uint32_t)0x00000000)        /*!< No clock */
+ #define  RCC_CFGR_MCO_SYSCLK                ((uint32_t)0x04000000)        /*!< System clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSI                   ((uint32_t)0x05000000)        /*!< HSI clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSE                   ((uint32_t)0x06000000)        /*!< HSE clock selected as MCO source */
+ #define  RCC_CFGR_MCO_PLLCLK_Div2           ((uint32_t)0x07000000)        /*!< PLL clock divided by 2 selected as MCO source */
+ #define  RCC_CFGR_MCO_PLL2CLK               ((uint32_t)0x08000000)        /*!< PLL2 clock selected as MCO source*/
+ #define  RCC_CFGR_MCO_PLL3CLK_Div2          ((uint32_t)0x09000000)        /*!< PLL3 clock divided by 2 selected as MCO source*/
+ #define  RCC_CFGR_MCO_Ext_HSE               ((uint32_t)0x0A000000)        /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */
+ #define  RCC_CFGR_MCO_PLL3CLK               ((uint32_t)0x0B000000)        /*!< PLL3 clock selected as MCO source */
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+ #define  RCC_CFGR_PLLSRC_HSI_Div2           ((uint32_t)0x00000000)        /*!< HSI clock divided by 2 selected as PLL entry clock source */
+ #define  RCC_CFGR_PLLSRC_PREDIV1            ((uint32_t)0x00010000)        /*!< PREDIV1 clock selected as PLL entry clock source */
+
+ #define  RCC_CFGR_PLLXTPRE_PREDIV1          ((uint32_t)0x00000000)        /*!< PREDIV1 clock not divided for PLL entry */
+ #define  RCC_CFGR_PLLXTPRE_PREDIV1_Div2     ((uint32_t)0x00020000)        /*!< PREDIV1 clock divided by 2 for PLL entry */
+
+ #define  RCC_CFGR_PLLMULL2                  ((uint32_t)0x00000000)        /*!< PLL input clock*2 */
+ #define  RCC_CFGR_PLLMULL3                  ((uint32_t)0x00040000)        /*!< PLL input clock*3 */
+ #define  RCC_CFGR_PLLMULL4                  ((uint32_t)0x00080000)        /*!< PLL input clock*4 */
+ #define  RCC_CFGR_PLLMULL5                  ((uint32_t)0x000C0000)        /*!< PLL input clock*5 */
+ #define  RCC_CFGR_PLLMULL6                  ((uint32_t)0x00100000)        /*!< PLL input clock*6 */
+ #define  RCC_CFGR_PLLMULL7                  ((uint32_t)0x00140000)        /*!< PLL input clock*7 */
+ #define  RCC_CFGR_PLLMULL8                  ((uint32_t)0x00180000)        /*!< PLL input clock*8 */
+ #define  RCC_CFGR_PLLMULL9                  ((uint32_t)0x001C0000)        /*!< PLL input clock*9 */
+ #define  RCC_CFGR_PLLMULL10                 ((uint32_t)0x00200000)        /*!< PLL input clock10 */
+ #define  RCC_CFGR_PLLMULL11                 ((uint32_t)0x00240000)        /*!< PLL input clock*11 */
+ #define  RCC_CFGR_PLLMULL12                 ((uint32_t)0x00280000)        /*!< PLL input clock*12 */
+ #define  RCC_CFGR_PLLMULL13                 ((uint32_t)0x002C0000)        /*!< PLL input clock*13 */
+ #define  RCC_CFGR_PLLMULL14                 ((uint32_t)0x00300000)        /*!< PLL input clock*14 */
+ #define  RCC_CFGR_PLLMULL15                 ((uint32_t)0x00340000)        /*!< PLL input clock*15 */
+ #define  RCC_CFGR_PLLMULL16                 ((uint32_t)0x00380000)        /*!< PLL input clock*16 */
+
+/*!< MCO configuration */
+ #define  RCC_CFGR_MCO                       ((uint32_t)0x07000000)        /*!< MCO[2:0] bits (Microcontroller Clock Output) */
+ #define  RCC_CFGR_MCO_0                     ((uint32_t)0x01000000)        /*!< Bit 0 */
+ #define  RCC_CFGR_MCO_1                     ((uint32_t)0x02000000)        /*!< Bit 1 */
+ #define  RCC_CFGR_MCO_2                     ((uint32_t)0x04000000)        /*!< Bit 2 */
+
+ #define  RCC_CFGR_MCO_NOCLOCK               ((uint32_t)0x00000000)        /*!< No clock */
+ #define  RCC_CFGR_MCO_SYSCLK                ((uint32_t)0x04000000)        /*!< System clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSI                   ((uint32_t)0x05000000)        /*!< HSI clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSE                   ((uint32_t)0x06000000)        /*!< HSE clock selected as MCO source  */
+ #define  RCC_CFGR_MCO_PLL                   ((uint32_t)0x07000000)        /*!< PLL clock divided by 2 selected as MCO source */
+#else
+ #define  RCC_CFGR_PLLSRC_HSI_Div2           ((uint32_t)0x00000000)        /*!< HSI clock divided by 2 selected as PLL entry clock source */
+ #define  RCC_CFGR_PLLSRC_HSE                ((uint32_t)0x00010000)        /*!< HSE clock selected as PLL entry clock source */
+
+ #define  RCC_CFGR_PLLXTPRE_HSE              ((uint32_t)0x00000000)        /*!< HSE clock not divided for PLL entry */
+ #define  RCC_CFGR_PLLXTPRE_HSE_Div2         ((uint32_t)0x00020000)        /*!< HSE clock divided by 2 for PLL entry */
+
+ #define  RCC_CFGR_PLLMULL2                  ((uint32_t)0x00000000)        /*!< PLL input clock*2 */
+ #define  RCC_CFGR_PLLMULL3                  ((uint32_t)0x00040000)        /*!< PLL input clock*3 */
+ #define  RCC_CFGR_PLLMULL4                  ((uint32_t)0x00080000)        /*!< PLL input clock*4 */
+ #define  RCC_CFGR_PLLMULL5                  ((uint32_t)0x000C0000)        /*!< PLL input clock*5 */
+ #define  RCC_CFGR_PLLMULL6                  ((uint32_t)0x00100000)        /*!< PLL input clock*6 */
+ #define  RCC_CFGR_PLLMULL7                  ((uint32_t)0x00140000)        /*!< PLL input clock*7 */
+ #define  RCC_CFGR_PLLMULL8                  ((uint32_t)0x00180000)        /*!< PLL input clock*8 */
+ #define  RCC_CFGR_PLLMULL9                  ((uint32_t)0x001C0000)        /*!< PLL input clock*9 */
+ #define  RCC_CFGR_PLLMULL10                 ((uint32_t)0x00200000)        /*!< PLL input clock10 */
+ #define  RCC_CFGR_PLLMULL11                 ((uint32_t)0x00240000)        /*!< PLL input clock*11 */
+ #define  RCC_CFGR_PLLMULL12                 ((uint32_t)0x00280000)        /*!< PLL input clock*12 */
+ #define  RCC_CFGR_PLLMULL13                 ((uint32_t)0x002C0000)        /*!< PLL input clock*13 */
+ #define  RCC_CFGR_PLLMULL14                 ((uint32_t)0x00300000)        /*!< PLL input clock*14 */
+ #define  RCC_CFGR_PLLMULL15                 ((uint32_t)0x00340000)        /*!< PLL input clock*15 */
+ #define  RCC_CFGR_PLLMULL16                 ((uint32_t)0x00380000)        /*!< PLL input clock*16 */
+ #define  RCC_CFGR_USBPRE                    ((uint32_t)0x00400000)        /*!< USB Device prescaler */
+
+/*!< MCO configuration */
+ #define  RCC_CFGR_MCO                       ((uint32_t)0x07000000)        /*!< MCO[2:0] bits (Microcontroller Clock Output) */
+ #define  RCC_CFGR_MCO_0                     ((uint32_t)0x01000000)        /*!< Bit 0 */
+ #define  RCC_CFGR_MCO_1                     ((uint32_t)0x02000000)        /*!< Bit 1 */
+ #define  RCC_CFGR_MCO_2                     ((uint32_t)0x04000000)        /*!< Bit 2 */
+
+ #define  RCC_CFGR_MCO_NOCLOCK               ((uint32_t)0x00000000)        /*!< No clock */
+ #define  RCC_CFGR_MCO_SYSCLK                ((uint32_t)0x04000000)        /*!< System clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSI                   ((uint32_t)0x05000000)        /*!< HSI clock selected as MCO source */
+ #define  RCC_CFGR_MCO_HSE                   ((uint32_t)0x06000000)        /*!< HSE clock selected as MCO source  */
+ #define  RCC_CFGR_MCO_PLL                   ((uint32_t)0x07000000)        /*!< PLL clock divided by 2 selected as MCO source */
+#endif /* STM32F10X_CL */
+
+/*!<******************  Bit definition for RCC_CIR register  ********************/
+#define  RCC_CIR_LSIRDYF                     ((uint32_t)0x00000001)        /*!< LSI Ready Interrupt flag */
+#define  RCC_CIR_LSERDYF                     ((uint32_t)0x00000002)        /*!< LSE Ready Interrupt flag */
+#define  RCC_CIR_HSIRDYF                     ((uint32_t)0x00000004)        /*!< HSI Ready Interrupt flag */
+#define  RCC_CIR_HSERDYF                     ((uint32_t)0x00000008)        /*!< HSE Ready Interrupt flag */
+#define  RCC_CIR_PLLRDYF                     ((uint32_t)0x00000010)        /*!< PLL Ready Interrupt flag */
+#define  RCC_CIR_CSSF                        ((uint32_t)0x00000080)        /*!< Clock Security System Interrupt flag */
+#define  RCC_CIR_LSIRDYIE                    ((uint32_t)0x00000100)        /*!< LSI Ready Interrupt Enable */
+#define  RCC_CIR_LSERDYIE                    ((uint32_t)0x00000200)        /*!< LSE Ready Interrupt Enable */
+#define  RCC_CIR_HSIRDYIE                    ((uint32_t)0x00000400)        /*!< HSI Ready Interrupt Enable */
+#define  RCC_CIR_HSERDYIE                    ((uint32_t)0x00000800)        /*!< HSE Ready Interrupt Enable */
+#define  RCC_CIR_PLLRDYIE                    ((uint32_t)0x00001000)        /*!< PLL Ready Interrupt Enable */
+#define  RCC_CIR_LSIRDYC                     ((uint32_t)0x00010000)        /*!< LSI Ready Interrupt Clear */
+#define  RCC_CIR_LSERDYC                     ((uint32_t)0x00020000)        /*!< LSE Ready Interrupt Clear */
+#define  RCC_CIR_HSIRDYC                     ((uint32_t)0x00040000)        /*!< HSI Ready Interrupt Clear */
+#define  RCC_CIR_HSERDYC                     ((uint32_t)0x00080000)        /*!< HSE Ready Interrupt Clear */
+#define  RCC_CIR_PLLRDYC                     ((uint32_t)0x00100000)        /*!< PLL Ready Interrupt Clear */
+#define  RCC_CIR_CSSC                        ((uint32_t)0x00800000)        /*!< Clock Security System Interrupt Clear */
+
+#ifdef STM32F10X_CL
+ #define  RCC_CIR_PLL2RDYF                    ((uint32_t)0x00000020)        /*!< PLL2 Ready Interrupt flag */
+ #define  RCC_CIR_PLL3RDYF                    ((uint32_t)0x00000040)        /*!< PLL3 Ready Interrupt flag */
+ #define  RCC_CIR_PLL2RDYIE                   ((uint32_t)0x00002000)        /*!< PLL2 Ready Interrupt Enable */
+ #define  RCC_CIR_PLL3RDYIE                   ((uint32_t)0x00004000)        /*!< PLL3 Ready Interrupt Enable */
+ #define  RCC_CIR_PLL2RDYC                    ((uint32_t)0x00200000)        /*!< PLL2 Ready Interrupt Clear */
+ #define  RCC_CIR_PLL3RDYC                    ((uint32_t)0x00400000)        /*!< PLL3 Ready Interrupt Clear */
+#endif /* STM32F10X_CL */
+
+/*****************  Bit definition for RCC_APB2RSTR register  *****************/
+#define  RCC_APB2RSTR_AFIORST                ((uint32_t)0x00000001)        /*!< Alternate Function I/O reset */
+#define  RCC_APB2RSTR_IOPARST                ((uint32_t)0x00000004)        /*!< I/O port A reset */
+#define  RCC_APB2RSTR_IOPBRST                ((uint32_t)0x00000008)        /*!< I/O port B reset */
+#define  RCC_APB2RSTR_IOPCRST                ((uint32_t)0x00000010)        /*!< I/O port C reset */
+#define  RCC_APB2RSTR_IOPDRST                ((uint32_t)0x00000020)        /*!< I/O port D reset */
+#define  RCC_APB2RSTR_ADC1RST                ((uint32_t)0x00000200)        /*!< ADC 1 interface reset */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define  RCC_APB2RSTR_ADC2RST                ((uint32_t)0x00000400)        /*!< ADC 2 interface reset */
+#endif
+
+#define  RCC_APB2RSTR_TIM1RST                ((uint32_t)0x00000800)        /*!< TIM1 Timer reset */
+#define  RCC_APB2RSTR_SPI1RST                ((uint32_t)0x00001000)        /*!< SPI 1 reset */
+#define  RCC_APB2RSTR_USART1RST              ((uint32_t)0x00004000)        /*!< USART1 reset */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+#define  RCC_APB2RSTR_TIM15RST               ((uint32_t)0x00010000)        /*!< TIM15 Timer reset */
+#define  RCC_APB2RSTR_TIM16RST               ((uint32_t)0x00020000)        /*!< TIM16 Timer reset */
+#define  RCC_APB2RSTR_TIM17RST               ((uint32_t)0x00040000)        /*!< TIM17 Timer reset */
+#endif
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define  RCC_APB2RSTR_IOPERST               ((uint32_t)0x00000040)        /*!< I/O port E reset */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_XL)
+ #define  RCC_APB2RSTR_IOPFRST               ((uint32_t)0x00000080)        /*!< I/O port F reset */
+ #define  RCC_APB2RSTR_IOPGRST               ((uint32_t)0x00000100)        /*!< I/O port G reset */
+ #define  RCC_APB2RSTR_TIM8RST               ((uint32_t)0x00002000)        /*!< TIM8 Timer reset */
+ #define  RCC_APB2RSTR_ADC3RST               ((uint32_t)0x00008000)        /*!< ADC3 interface reset */
+#endif
+
+#if defined (STM32F10X_HD_VL)
+ #define  RCC_APB2RSTR_IOPFRST               ((uint32_t)0x00000080)        /*!< I/O port F reset */
+ #define  RCC_APB2RSTR_IOPGRST               ((uint32_t)0x00000100)        /*!< I/O port G reset */
+#endif
+
+#ifdef STM32F10X_XL
+ #define  RCC_APB2RSTR_TIM9RST               ((uint32_t)0x00080000)         /*!< TIM9 Timer reset */
+ #define  RCC_APB2RSTR_TIM10RST              ((uint32_t)0x00100000)         /*!< TIM10 Timer reset */
+ #define  RCC_APB2RSTR_TIM11RST              ((uint32_t)0x00200000)         /*!< TIM11 Timer reset */
+#endif /* STM32F10X_XL */
+
+/*****************  Bit definition for RCC_APB1RSTR register  *****************/
+#define  RCC_APB1RSTR_TIM2RST                ((uint32_t)0x00000001)        /*!< Timer 2 reset */
+#define  RCC_APB1RSTR_TIM3RST                ((uint32_t)0x00000002)        /*!< Timer 3 reset */
+#define  RCC_APB1RSTR_WWDGRST                ((uint32_t)0x00000800)        /*!< Window Watchdog reset */
+#define  RCC_APB1RSTR_USART2RST              ((uint32_t)0x00020000)        /*!< USART 2 reset */
+#define  RCC_APB1RSTR_I2C1RST                ((uint32_t)0x00200000)        /*!< I2C 1 reset */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define  RCC_APB1RSTR_CAN1RST                ((uint32_t)0x02000000)        /*!< CAN1 reset */
+#endif
+
+#define  RCC_APB1RSTR_BKPRST                 ((uint32_t)0x08000000)        /*!< Backup interface reset */
+#define  RCC_APB1RSTR_PWRRST                 ((uint32_t)0x10000000)        /*!< Power interface reset */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define  RCC_APB1RSTR_TIM4RST               ((uint32_t)0x00000004)        /*!< Timer 4 reset */
+ #define  RCC_APB1RSTR_SPI2RST               ((uint32_t)0x00004000)        /*!< SPI 2 reset */
+ #define  RCC_APB1RSTR_USART3RST             ((uint32_t)0x00040000)        /*!< USART 3 reset */
+ #define  RCC_APB1RSTR_I2C2RST               ((uint32_t)0x00400000)        /*!< I2C 2 reset */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) || defined  (STM32F10X_XL)
+ #define  RCC_APB1RSTR_USBRST                ((uint32_t)0x00800000)        /*!< USB Device reset */
+#endif
+
+#if defined (STM32F10X_HD) || defined  (STM32F10X_CL) || defined  (STM32F10X_XL)
+ #define  RCC_APB1RSTR_TIM5RST                ((uint32_t)0x00000008)        /*!< Timer 5 reset */
+ #define  RCC_APB1RSTR_TIM6RST                ((uint32_t)0x00000010)        /*!< Timer 6 reset */
+ #define  RCC_APB1RSTR_TIM7RST                ((uint32_t)0x00000020)        /*!< Timer 7 reset */
+ #define  RCC_APB1RSTR_SPI3RST                ((uint32_t)0x00008000)        /*!< SPI 3 reset */
+ #define  RCC_APB1RSTR_UART4RST               ((uint32_t)0x00080000)        /*!< UART 4 reset */
+ #define  RCC_APB1RSTR_UART5RST               ((uint32_t)0x00100000)        /*!< UART 5 reset */
+ #define  RCC_APB1RSTR_DACRST                 ((uint32_t)0x20000000)        /*!< DAC interface reset */
+#endif
+
+#if defined (STM32F10X_LD_VL) || defined  (STM32F10X_MD_VL) || defined  (STM32F10X_HD_VL)
+ #define  RCC_APB1RSTR_TIM6RST                ((uint32_t)0x00000010)        /*!< Timer 6 reset */
+ #define  RCC_APB1RSTR_TIM7RST                ((uint32_t)0x00000020)        /*!< Timer 7 reset */
+ #define  RCC_APB1RSTR_DACRST                 ((uint32_t)0x20000000)        /*!< DAC interface reset */
+ #define  RCC_APB1RSTR_CECRST                 ((uint32_t)0x40000000)        /*!< CEC interface reset */ 
+#endif
+
+#if defined  (STM32F10X_HD_VL)
+ #define  RCC_APB1RSTR_TIM5RST                ((uint32_t)0x00000008)        /*!< Timer 5 reset */
+ #define  RCC_APB1RSTR_TIM12RST               ((uint32_t)0x00000040)        /*!< TIM12 Timer reset */
+ #define  RCC_APB1RSTR_TIM13RST               ((uint32_t)0x00000080)        /*!< TIM13 Timer reset */
+ #define  RCC_APB1RSTR_TIM14RST               ((uint32_t)0x00000100)        /*!< TIM14 Timer reset */
+ #define  RCC_APB1RSTR_SPI3RST                ((uint32_t)0x00008000)        /*!< SPI 3 reset */ 
+ #define  RCC_APB1RSTR_UART4RST               ((uint32_t)0x00080000)        /*!< UART 4 reset */
+ #define  RCC_APB1RSTR_UART5RST               ((uint32_t)0x00100000)        /*!< UART 5 reset */ 
+#endif
+
+#ifdef STM32F10X_CL
+ #define  RCC_APB1RSTR_CAN2RST                ((uint32_t)0x04000000)        /*!< CAN2 reset */
+#endif /* STM32F10X_CL */
+
+#ifdef STM32F10X_XL
+ #define  RCC_APB1RSTR_TIM12RST               ((uint32_t)0x00000040)         /*!< TIM12 Timer reset */
+ #define  RCC_APB1RSTR_TIM13RST               ((uint32_t)0x00000080)         /*!< TIM13 Timer reset */
+ #define  RCC_APB1RSTR_TIM14RST               ((uint32_t)0x00000100)         /*!< TIM14 Timer reset */
+#endif /* STM32F10X_XL */
+
+/******************  Bit definition for RCC_AHBENR register  ******************/
+#define  RCC_AHBENR_DMA1EN                   ((uint16_t)0x0001)            /*!< DMA1 clock enable */
+#define  RCC_AHBENR_SRAMEN                   ((uint16_t)0x0004)            /*!< SRAM interface clock enable */
+#define  RCC_AHBENR_FLITFEN                  ((uint16_t)0x0010)            /*!< FLITF clock enable */
+#define  RCC_AHBENR_CRCEN                    ((uint16_t)0x0040)            /*!< CRC clock enable */
+
+#if defined (STM32F10X_HD) || defined  (STM32F10X_CL) || defined  (STM32F10X_HD_VL)
+ #define  RCC_AHBENR_DMA2EN                  ((uint16_t)0x0002)            /*!< DMA2 clock enable */
+#endif
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_XL)
+ #define  RCC_AHBENR_FSMCEN                  ((uint16_t)0x0100)            /*!< FSMC clock enable */
+ #define  RCC_AHBENR_SDIOEN                  ((uint16_t)0x0400)            /*!< SDIO clock enable */
+#endif
+
+#if defined (STM32F10X_HD_VL)
+ #define  RCC_AHBENR_FSMCEN                  ((uint16_t)0x0100)            /*!< FSMC clock enable */
+#endif
+
+#ifdef STM32F10X_CL
+ #define  RCC_AHBENR_OTGFSEN                 ((uint32_t)0x00001000)         /*!< USB OTG FS clock enable */
+ #define  RCC_AHBENR_ETHMACEN                ((uint32_t)0x00004000)         /*!< ETHERNET MAC clock enable */
+ #define  RCC_AHBENR_ETHMACTXEN              ((uint32_t)0x00008000)         /*!< ETHERNET MAC Tx clock enable */
+ #define  RCC_AHBENR_ETHMACRXEN              ((uint32_t)0x00010000)         /*!< ETHERNET MAC Rx clock enable */
+#endif /* STM32F10X_CL */
+
+/******************  Bit definition for RCC_APB2ENR register  *****************/
+#define  RCC_APB2ENR_AFIOEN                  ((uint32_t)0x00000001)         /*!< Alternate Function I/O clock enable */
+#define  RCC_APB2ENR_IOPAEN                  ((uint32_t)0x00000004)         /*!< I/O port A clock enable */
+#define  RCC_APB2ENR_IOPBEN                  ((uint32_t)0x00000008)         /*!< I/O port B clock enable */
+#define  RCC_APB2ENR_IOPCEN                  ((uint32_t)0x00000010)         /*!< I/O port C clock enable */
+#define  RCC_APB2ENR_IOPDEN                  ((uint32_t)0x00000020)         /*!< I/O port D clock enable */
+#define  RCC_APB2ENR_ADC1EN                  ((uint32_t)0x00000200)         /*!< ADC 1 interface clock enable */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define  RCC_APB2ENR_ADC2EN                  ((uint32_t)0x00000400)         /*!< ADC 2 interface clock enable */
+#endif
+
+#define  RCC_APB2ENR_TIM1EN                  ((uint32_t)0x00000800)         /*!< TIM1 Timer clock enable */
+#define  RCC_APB2ENR_SPI1EN                  ((uint32_t)0x00001000)         /*!< SPI 1 clock enable */
+#define  RCC_APB2ENR_USART1EN                ((uint32_t)0x00004000)         /*!< USART1 clock enable */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+#define  RCC_APB2ENR_TIM15EN                 ((uint32_t)0x00010000)         /*!< TIM15 Timer clock enable */
+#define  RCC_APB2ENR_TIM16EN                 ((uint32_t)0x00020000)         /*!< TIM16 Timer clock enable */
+#define  RCC_APB2ENR_TIM17EN                 ((uint32_t)0x00040000)         /*!< TIM17 Timer clock enable */
+#endif
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define  RCC_APB2ENR_IOPEEN                 ((uint32_t)0x00000040)         /*!< I/O port E clock enable */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_XL)
+ #define  RCC_APB2ENR_IOPFEN                 ((uint32_t)0x00000080)         /*!< I/O port F clock enable */
+ #define  RCC_APB2ENR_IOPGEN                 ((uint32_t)0x00000100)         /*!< I/O port G clock enable */
+ #define  RCC_APB2ENR_TIM8EN                 ((uint32_t)0x00002000)         /*!< TIM8 Timer clock enable */
+ #define  RCC_APB2ENR_ADC3EN                 ((uint32_t)0x00008000)         /*!< DMA1 clock enable */
+#endif
+
+#if defined (STM32F10X_HD_VL)
+ #define  RCC_APB2ENR_IOPFEN                 ((uint32_t)0x00000080)         /*!< I/O port F clock enable */
+ #define  RCC_APB2ENR_IOPGEN                 ((uint32_t)0x00000100)         /*!< I/O port G clock enable */
+#endif
+
+#ifdef STM32F10X_XL
+ #define  RCC_APB2ENR_TIM9EN                 ((uint32_t)0x00080000)         /*!< TIM9 Timer clock enable  */
+ #define  RCC_APB2ENR_TIM10EN                ((uint32_t)0x00100000)         /*!< TIM10 Timer clock enable  */
+ #define  RCC_APB2ENR_TIM11EN                ((uint32_t)0x00200000)         /*!< TIM11 Timer clock enable */
+#endif
+
+/*****************  Bit definition for RCC_APB1ENR register  ******************/
+#define  RCC_APB1ENR_TIM2EN                  ((uint32_t)0x00000001)        /*!< Timer 2 clock enabled*/
+#define  RCC_APB1ENR_TIM3EN                  ((uint32_t)0x00000002)        /*!< Timer 3 clock enable */
+#define  RCC_APB1ENR_WWDGEN                  ((uint32_t)0x00000800)        /*!< Window Watchdog clock enable */
+#define  RCC_APB1ENR_USART2EN                ((uint32_t)0x00020000)        /*!< USART 2 clock enable */
+#define  RCC_APB1ENR_I2C1EN                  ((uint32_t)0x00200000)        /*!< I2C 1 clock enable */
+
+#if !defined (STM32F10X_LD_VL) && !defined (STM32F10X_MD_VL) && !defined (STM32F10X_HD_VL)
+#define  RCC_APB1ENR_CAN1EN                  ((uint32_t)0x02000000)        /*!< CAN1 clock enable */
+#endif
+
+#define  RCC_APB1ENR_BKPEN                   ((uint32_t)0x08000000)        /*!< Backup interface clock enable */
+#define  RCC_APB1ENR_PWREN                   ((uint32_t)0x10000000)        /*!< Power interface clock enable */
+
+#if !defined (STM32F10X_LD) && !defined (STM32F10X_LD_VL)
+ #define  RCC_APB1ENR_TIM4EN                 ((uint32_t)0x00000004)        /*!< Timer 4 clock enable */
+ #define  RCC_APB1ENR_SPI2EN                 ((uint32_t)0x00004000)        /*!< SPI 2 clock enable */
+ #define  RCC_APB1ENR_USART3EN               ((uint32_t)0x00040000)        /*!< USART 3 clock enable */
+ #define  RCC_APB1ENR_I2C2EN                 ((uint32_t)0x00400000)        /*!< I2C 2 clock enable */
+#endif /* STM32F10X_LD && STM32F10X_LD_VL */
+
+#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined  (STM32F10X_LD)
+ #define  RCC_APB1ENR_USBEN                  ((uint32_t)0x00800000)        /*!< USB Device clock enable */
+#endif
+
+#if defined (STM32F10X_HD) || defined  (STM32F10X_CL)
+ #define  RCC_APB1ENR_TIM5EN                 ((uint32_t)0x00000008)        /*!< Timer 5 clock enable */
+ #define  RCC_APB1ENR_TIM6EN                 ((uint32_t)0x00000010)        /*!< Timer 6 clock enable */
+ #define  RCC_APB1ENR_TIM7EN                 ((uint32_t)0x00000020)        /*!< Timer 7 clock enable */
+ #define  RCC_APB1ENR_SPI3EN                 ((uint32_t)0x00008000)        /*!< SPI 3 clock enable */
+ #define  RCC_APB1ENR_UART4EN                ((uint32_t)0x00080000)        /*!< UART 4 clock enable */
+ #define  RCC_APB1ENR_UART5EN                ((uint32_t)0x00100000)        /*!< UART 5 clock enable */
+ #define  RCC_APB1ENR_DACEN                  ((uint32_t)0x20000000)        /*!< DAC interface clock enable */
+#endif
+
+#if defined (STM32F10X_LD_VL) || defined  (STM32F10X_MD_VL) || defined  (STM32F10X_HD_VL)
+ #define  RCC_APB1ENR_TIM6EN                 ((uint32_t)0x00000010)        /*!< Timer 6 clock enable */
+ #define  RCC_APB1ENR_TIM7EN                 ((uint32_t)0x00000020)        /*!< Timer 7 clock enable */
+ #define  RCC_APB1ENR_DACEN                  ((uint32_t)0x20000000)        /*!< DAC interface clock enable */
+ #define  RCC_APB1ENR_CECEN                  ((uint32_t)0x40000000)        /*!< CEC interface clock enable */ 
+#endif
+
+#ifdef STM32F10X_HD_VL
+ #define  RCC_APB1ENR_TIM5EN                 ((uint32_t)0x00000008)        /*!< Timer 5 clock enable */
+ #define  RCC_APB1ENR_TIM12EN                ((uint32_t)0x00000040)         /*!< TIM12 Timer clock enable  */
+ #define  RCC_APB1ENR_TIM13EN                ((uint32_t)0x00000080)         /*!< TIM13 Timer clock enable  */
+ #define  RCC_APB1ENR_TIM14EN                ((uint32_t)0x00000100)         /*!< TIM14 Timer clock enable */
+ #define  RCC_APB1ENR_SPI3EN                 ((uint32_t)0x00008000)        /*!< SPI 3 clock enable */
+ #define  RCC_APB1ENR_UART4EN                ((uint32_t)0x00080000)        /*!< UART 4 clock enable */
+ #define  RCC_APB1ENR_UART5EN                ((uint32_t)0x00100000)        /*!< UART 5 clock enable */ 
+#endif /* STM32F10X_HD_VL */
+
+#ifdef STM32F10X_CL
+ #define  RCC_APB1ENR_CAN2EN                  ((uint32_t)0x04000000)        /*!< CAN2 clock enable */
+#endif /* STM32F10X_CL */
+
+#ifdef STM32F10X_XL
+ #define  RCC_APB1ENR_TIM12EN                ((uint32_t)0x00000040)         /*!< TIM12 Timer clock enable  */
+ #define  RCC_APB1ENR_TIM13EN                ((uint32_t)0x00000080)         /*!< TIM13 Timer clock enable  */
+ #define  RCC_APB1ENR_TIM14EN                ((uint32_t)0x00000100)         /*!< TIM14 Timer clock enable */
+#endif /* STM32F10X_XL */
+
+/*******************  Bit definition for RCC_BDCR register  *******************/
+#define  RCC_BDCR_LSEON                      ((uint32_t)0x00000001)        /*!< External Low Speed oscillator enable */
+#define  RCC_BDCR_LSERDY                     ((uint32_t)0x00000002)        /*!< External Low Speed oscillator Ready */
+#define  RCC_BDCR_LSEBYP                     ((uint32_t)0x00000004)        /*!< External Low Speed oscillator Bypass */
+
+#define  RCC_BDCR_RTCSEL                     ((uint32_t)0x00000300)        /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define  RCC_BDCR_RTCSEL_0                   ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  RCC_BDCR_RTCSEL_1                   ((uint32_t)0x00000200)        /*!< Bit 1 */
+
+/*!< RTC congiguration */
+#define  RCC_BDCR_RTCSEL_NOCLOCK             ((uint32_t)0x00000000)        /*!< No clock */
+#define  RCC_BDCR_RTCSEL_LSE                 ((uint32_t)0x00000100)        /*!< LSE oscillator clock used as RTC clock */
+#define  RCC_BDCR_RTCSEL_LSI                 ((uint32_t)0x00000200)        /*!< LSI oscillator clock used as RTC clock */
+#define  RCC_BDCR_RTCSEL_HSE                 ((uint32_t)0x00000300)        /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define  RCC_BDCR_RTCEN                      ((uint32_t)0x00008000)        /*!< RTC clock enable */
+#define  RCC_BDCR_BDRST                      ((uint32_t)0x00010000)        /*!< Backup domain software reset  */
+
+/*******************  Bit definition for RCC_CSR register  ********************/  
+#define  RCC_CSR_LSION                       ((uint32_t)0x00000001)        /*!< Internal Low Speed oscillator enable */
+#define  RCC_CSR_LSIRDY                      ((uint32_t)0x00000002)        /*!< Internal Low Speed oscillator Ready */
+#define  RCC_CSR_RMVF                        ((uint32_t)0x01000000)        /*!< Remove reset flag */
+#define  RCC_CSR_PINRSTF                     ((uint32_t)0x04000000)        /*!< PIN reset flag */
+#define  RCC_CSR_PORRSTF                     ((uint32_t)0x08000000)        /*!< POR/PDR reset flag */
+#define  RCC_CSR_SFTRSTF                     ((uint32_t)0x10000000)        /*!< Software Reset flag */
+#define  RCC_CSR_IWDGRSTF                    ((uint32_t)0x20000000)        /*!< Independent Watchdog reset flag */
+#define  RCC_CSR_WWDGRSTF                    ((uint32_t)0x40000000)        /*!< Window watchdog reset flag */
+#define  RCC_CSR_LPWRRSTF                    ((uint32_t)0x80000000)        /*!< Low-Power reset flag */
+
+#ifdef STM32F10X_CL
+/*******************  Bit definition for RCC_AHBRSTR register  ****************/
+ #define  RCC_AHBRSTR_OTGFSRST               ((uint32_t)0x00001000)         /*!< USB OTG FS reset */
+ #define  RCC_AHBRSTR_ETHMACRST              ((uint32_t)0x00004000)         /*!< ETHERNET MAC reset */
+
+/*******************  Bit definition for RCC_CFGR2 register  ******************/
+/*!< PREDIV1 configuration */
+ #define  RCC_CFGR2_PREDIV1                  ((uint32_t)0x0000000F)        /*!< PREDIV1[3:0] bits */
+ #define  RCC_CFGR2_PREDIV1_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+ #define  RCC_CFGR2_PREDIV1_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+ #define  RCC_CFGR2_PREDIV1_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+ #define  RCC_CFGR2_PREDIV1_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+ #define  RCC_CFGR2_PREDIV1_DIV1             ((uint32_t)0x00000000)        /*!< PREDIV1 input clock not divided */
+ #define  RCC_CFGR2_PREDIV1_DIV2             ((uint32_t)0x00000001)        /*!< PREDIV1 input clock divided by 2 */
+ #define  RCC_CFGR2_PREDIV1_DIV3             ((uint32_t)0x00000002)        /*!< PREDIV1 input clock divided by 3 */
+ #define  RCC_CFGR2_PREDIV1_DIV4             ((uint32_t)0x00000003)        /*!< PREDIV1 input clock divided by 4 */
+ #define  RCC_CFGR2_PREDIV1_DIV5             ((uint32_t)0x00000004)        /*!< PREDIV1 input clock divided by 5 */
+ #define  RCC_CFGR2_PREDIV1_DIV6             ((uint32_t)0x00000005)        /*!< PREDIV1 input clock divided by 6 */
+ #define  RCC_CFGR2_PREDIV1_DIV7             ((uint32_t)0x00000006)        /*!< PREDIV1 input clock divided by 7 */
+ #define  RCC_CFGR2_PREDIV1_DIV8             ((uint32_t)0x00000007)        /*!< PREDIV1 input clock divided by 8 */
+ #define  RCC_CFGR2_PREDIV1_DIV9             ((uint32_t)0x00000008)        /*!< PREDIV1 input clock divided by 9 */
+ #define  RCC_CFGR2_PREDIV1_DIV10            ((uint32_t)0x00000009)        /*!< PREDIV1 input clock divided by 10 */
+ #define  RCC_CFGR2_PREDIV1_DIV11            ((uint32_t)0x0000000A)        /*!< PREDIV1 input clock divided by 11 */
+ #define  RCC_CFGR2_PREDIV1_DIV12            ((uint32_t)0x0000000B)        /*!< PREDIV1 input clock divided by 12 */
+ #define  RCC_CFGR2_PREDIV1_DIV13            ((uint32_t)0x0000000C)        /*!< PREDIV1 input clock divided by 13 */
+ #define  RCC_CFGR2_PREDIV1_DIV14            ((uint32_t)0x0000000D)        /*!< PREDIV1 input clock divided by 14 */
+ #define  RCC_CFGR2_PREDIV1_DIV15            ((uint32_t)0x0000000E)        /*!< PREDIV1 input clock divided by 15 */
+ #define  RCC_CFGR2_PREDIV1_DIV16            ((uint32_t)0x0000000F)        /*!< PREDIV1 input clock divided by 16 */
+
+/*!< PREDIV2 configuration */
+ #define  RCC_CFGR2_PREDIV2                  ((uint32_t)0x000000F0)        /*!< PREDIV2[3:0] bits */
+ #define  RCC_CFGR2_PREDIV2_0                ((uint32_t)0x00000010)        /*!< Bit 0 */
+ #define  RCC_CFGR2_PREDIV2_1                ((uint32_t)0x00000020)        /*!< Bit 1 */
+ #define  RCC_CFGR2_PREDIV2_2                ((uint32_t)0x00000040)        /*!< Bit 2 */
+ #define  RCC_CFGR2_PREDIV2_3                ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+ #define  RCC_CFGR2_PREDIV2_DIV1             ((uint32_t)0x00000000)        /*!< PREDIV2 input clock not divided */
+ #define  RCC_CFGR2_PREDIV2_DIV2             ((uint32_t)0x00000010)        /*!< PREDIV2 input clock divided by 2 */
+ #define  RCC_CFGR2_PREDIV2_DIV3             ((uint32_t)0x00000020)        /*!< PREDIV2 input clock divided by 3 */
+ #define  RCC_CFGR2_PREDIV2_DIV4             ((uint32_t)0x00000030)        /*!< PREDIV2 input clock divided by 4 */
+ #define  RCC_CFGR2_PREDIV2_DIV5             ((uint32_t)0x00000040)        /*!< PREDIV2 input clock divided by 5 */
+ #define  RCC_CFGR2_PREDIV2_DIV6             ((uint32_t)0x00000050)        /*!< PREDIV2 input clock divided by 6 */
+ #define  RCC_CFGR2_PREDIV2_DIV7             ((uint32_t)0x00000060)        /*!< PREDIV2 input clock divided by 7 */
+ #define  RCC_CFGR2_PREDIV2_DIV8             ((uint32_t)0x00000070)        /*!< PREDIV2 input clock divided by 8 */
+ #define  RCC_CFGR2_PREDIV2_DIV9             ((uint32_t)0x00000080)        /*!< PREDIV2 input clock divided by 9 */
+ #define  RCC_CFGR2_PREDIV2_DIV10            ((uint32_t)0x00000090)        /*!< PREDIV2 input clock divided by 10 */
+ #define  RCC_CFGR2_PREDIV2_DIV11            ((uint32_t)0x000000A0)        /*!< PREDIV2 input clock divided by 11 */
+ #define  RCC_CFGR2_PREDIV2_DIV12            ((uint32_t)0x000000B0)        /*!< PREDIV2 input clock divided by 12 */
+ #define  RCC_CFGR2_PREDIV2_DIV13            ((uint32_t)0x000000C0)        /*!< PREDIV2 input clock divided by 13 */
+ #define  RCC_CFGR2_PREDIV2_DIV14            ((uint32_t)0x000000D0)        /*!< PREDIV2 input clock divided by 14 */
+ #define  RCC_CFGR2_PREDIV2_DIV15            ((uint32_t)0x000000E0)        /*!< PREDIV2 input clock divided by 15 */
+ #define  RCC_CFGR2_PREDIV2_DIV16            ((uint32_t)0x000000F0)        /*!< PREDIV2 input clock divided by 16 */
+
+/*!< PLL2MUL configuration */
+ #define  RCC_CFGR2_PLL2MUL                  ((uint32_t)0x00000F00)        /*!< PLL2MUL[3:0] bits */
+ #define  RCC_CFGR2_PLL2MUL_0                ((uint32_t)0x00000100)        /*!< Bit 0 */
+ #define  RCC_CFGR2_PLL2MUL_1                ((uint32_t)0x00000200)        /*!< Bit 1 */
+ #define  RCC_CFGR2_PLL2MUL_2                ((uint32_t)0x00000400)        /*!< Bit 2 */
+ #define  RCC_CFGR2_PLL2MUL_3                ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+ #define  RCC_CFGR2_PLL2MUL8                 ((uint32_t)0x00000600)        /*!< PLL2 input clock * 8 */
+ #define  RCC_CFGR2_PLL2MUL9                 ((uint32_t)0x00000700)        /*!< PLL2 input clock * 9 */
+ #define  RCC_CFGR2_PLL2MUL10                ((uint32_t)0x00000800)        /*!< PLL2 input clock * 10 */
+ #define  RCC_CFGR2_PLL2MUL11                ((uint32_t)0x00000900)        /*!< PLL2 input clock * 11 */
+ #define  RCC_CFGR2_PLL2MUL12                ((uint32_t)0x00000A00)        /*!< PLL2 input clock * 12 */
+ #define  RCC_CFGR2_PLL2MUL13                ((uint32_t)0x00000B00)        /*!< PLL2 input clock * 13 */
+ #define  RCC_CFGR2_PLL2MUL14                ((uint32_t)0x00000C00)        /*!< PLL2 input clock * 14 */
+ #define  RCC_CFGR2_PLL2MUL16                ((uint32_t)0x00000E00)        /*!< PLL2 input clock * 16 */
+ #define  RCC_CFGR2_PLL2MUL20                ((uint32_t)0x00000F00)        /*!< PLL2 input clock * 20 */
+
+/*!< PLL3MUL configuration */
+ #define  RCC_CFGR2_PLL3MUL                  ((uint32_t)0x0000F000)        /*!< PLL3MUL[3:0] bits */
+ #define  RCC_CFGR2_PLL3MUL_0                ((uint32_t)0x00001000)        /*!< Bit 0 */
+ #define  RCC_CFGR2_PLL3MUL_1                ((uint32_t)0x00002000)        /*!< Bit 1 */
+ #define  RCC_CFGR2_PLL3MUL_2                ((uint32_t)0x00004000)        /*!< Bit 2 */
+ #define  RCC_CFGR2_PLL3MUL_3                ((uint32_t)0x00008000)        /*!< Bit 3 */
+
+ #define  RCC_CFGR2_PLL3MUL8                 ((uint32_t)0x00006000)        /*!< PLL3 input clock * 8 */
+ #define  RCC_CFGR2_PLL3MUL9                 ((uint32_t)0x00007000)        /*!< PLL3 input clock * 9 */
+ #define  RCC_CFGR2_PLL3MUL10                ((uint32_t)0x00008000)        /*!< PLL3 input clock * 10 */
+ #define  RCC_CFGR2_PLL3MUL11                ((uint32_t)0x00009000)        /*!< PLL3 input clock * 11 */
+ #define  RCC_CFGR2_PLL3MUL12                ((uint32_t)0x0000A000)        /*!< PLL3 input clock * 12 */
+ #define  RCC_CFGR2_PLL3MUL13                ((uint32_t)0x0000B000)        /*!< PLL3 input clock * 13 */
+ #define  RCC_CFGR2_PLL3MUL14                ((uint32_t)0x0000C000)        /*!< PLL3 input clock * 14 */
+ #define  RCC_CFGR2_PLL3MUL16                ((uint32_t)0x0000E000)        /*!< PLL3 input clock * 16 */
+ #define  RCC_CFGR2_PLL3MUL20                ((uint32_t)0x0000F000)        /*!< PLL3 input clock * 20 */
+
+ #define  RCC_CFGR2_PREDIV1SRC               ((uint32_t)0x00010000)        /*!< PREDIV1 entry clock source */
+ #define  RCC_CFGR2_PREDIV1SRC_PLL2          ((uint32_t)0x00010000)        /*!< PLL2 selected as PREDIV1 entry clock source */
+ #define  RCC_CFGR2_PREDIV1SRC_HSE           ((uint32_t)0x00000000)        /*!< HSE selected as PREDIV1 entry clock source */
+ #define  RCC_CFGR2_I2S2SRC                  ((uint32_t)0x00020000)        /*!< I2S2 entry clock source */
+ #define  RCC_CFGR2_I2S3SRC                  ((uint32_t)0x00040000)        /*!< I2S3 clock source */
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/*******************  Bit definition for RCC_CFGR2 register  ******************/
+/*!< PREDIV1 configuration */
+ #define  RCC_CFGR2_PREDIV1                  ((uint32_t)0x0000000F)        /*!< PREDIV1[3:0] bits */
+ #define  RCC_CFGR2_PREDIV1_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+ #define  RCC_CFGR2_PREDIV1_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+ #define  RCC_CFGR2_PREDIV1_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+ #define  RCC_CFGR2_PREDIV1_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+ #define  RCC_CFGR2_PREDIV1_DIV1             ((uint32_t)0x00000000)        /*!< PREDIV1 input clock not divided */
+ #define  RCC_CFGR2_PREDIV1_DIV2             ((uint32_t)0x00000001)        /*!< PREDIV1 input clock divided by 2 */
+ #define  RCC_CFGR2_PREDIV1_DIV3             ((uint32_t)0x00000002)        /*!< PREDIV1 input clock divided by 3 */
+ #define  RCC_CFGR2_PREDIV1_DIV4             ((uint32_t)0x00000003)        /*!< PREDIV1 input clock divided by 4 */
+ #define  RCC_CFGR2_PREDIV1_DIV5             ((uint32_t)0x00000004)        /*!< PREDIV1 input clock divided by 5 */
+ #define  RCC_CFGR2_PREDIV1_DIV6             ((uint32_t)0x00000005)        /*!< PREDIV1 input clock divided by 6 */
+ #define  RCC_CFGR2_PREDIV1_DIV7             ((uint32_t)0x00000006)        /*!< PREDIV1 input clock divided by 7 */
+ #define  RCC_CFGR2_PREDIV1_DIV8             ((uint32_t)0x00000007)        /*!< PREDIV1 input clock divided by 8 */
+ #define  RCC_CFGR2_PREDIV1_DIV9             ((uint32_t)0x00000008)        /*!< PREDIV1 input clock divided by 9 */
+ #define  RCC_CFGR2_PREDIV1_DIV10            ((uint32_t)0x00000009)        /*!< PREDIV1 input clock divided by 10 */
+ #define  RCC_CFGR2_PREDIV1_DIV11            ((uint32_t)0x0000000A)        /*!< PREDIV1 input clock divided by 11 */
+ #define  RCC_CFGR2_PREDIV1_DIV12            ((uint32_t)0x0000000B)        /*!< PREDIV1 input clock divided by 12 */
+ #define  RCC_CFGR2_PREDIV1_DIV13            ((uint32_t)0x0000000C)        /*!< PREDIV1 input clock divided by 13 */
+ #define  RCC_CFGR2_PREDIV1_DIV14            ((uint32_t)0x0000000D)        /*!< PREDIV1 input clock divided by 14 */
+ #define  RCC_CFGR2_PREDIV1_DIV15            ((uint32_t)0x0000000E)        /*!< PREDIV1 input clock divided by 15 */
+ #define  RCC_CFGR2_PREDIV1_DIV16            ((uint32_t)0x0000000F)        /*!< PREDIV1 input clock divided by 16 */
+#endif
+ 
+/******************************************************************************/
+/*                                                                            */
+/*                General Purpose and Alternate Function I/O                  */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for GPIO_CRL register  *******************/
+#define  GPIO_CRL_MODE                       ((uint32_t)0x33333333)        /*!< Port x mode bits */
+
+#define  GPIO_CRL_MODE0                      ((uint32_t)0x00000003)        /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */
+#define  GPIO_CRL_MODE0_0                    ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE0_1                    ((uint32_t)0x00000002)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE1                      ((uint32_t)0x00000030)        /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */
+#define  GPIO_CRL_MODE1_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE1_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE2                      ((uint32_t)0x00000300)        /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */
+#define  GPIO_CRL_MODE2_0                    ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE2_1                    ((uint32_t)0x00000200)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE3                      ((uint32_t)0x00003000)        /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */
+#define  GPIO_CRL_MODE3_0                    ((uint32_t)0x00001000)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE3_1                    ((uint32_t)0x00002000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE4                      ((uint32_t)0x00030000)        /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */
+#define  GPIO_CRL_MODE4_0                    ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE4_1                    ((uint32_t)0x00020000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE5                      ((uint32_t)0x00300000)        /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */
+#define  GPIO_CRL_MODE5_0                    ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE5_1                    ((uint32_t)0x00200000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE6                      ((uint32_t)0x03000000)        /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */
+#define  GPIO_CRL_MODE6_0                    ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE6_1                    ((uint32_t)0x02000000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_MODE7                      ((uint32_t)0x30000000)        /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */
+#define  GPIO_CRL_MODE7_0                    ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  GPIO_CRL_MODE7_1                    ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF                        ((uint32_t)0xCCCCCCCC)        /*!< Port x configuration bits */
+
+#define  GPIO_CRL_CNF0                       ((uint32_t)0x0000000C)        /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */
+#define  GPIO_CRL_CNF0_0                     ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF0_1                     ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF1                       ((uint32_t)0x000000C0)        /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */
+#define  GPIO_CRL_CNF1_0                     ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF1_1                     ((uint32_t)0x00000080)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF2                       ((uint32_t)0x00000C00)        /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */
+#define  GPIO_CRL_CNF2_0                     ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF2_1                     ((uint32_t)0x00000800)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF3                       ((uint32_t)0x0000C000)        /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */
+#define  GPIO_CRL_CNF3_0                     ((uint32_t)0x00004000)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF3_1                     ((uint32_t)0x00008000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF4                       ((uint32_t)0x000C0000)        /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */
+#define  GPIO_CRL_CNF4_0                     ((uint32_t)0x00040000)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF4_1                     ((uint32_t)0x00080000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF5                       ((uint32_t)0x00C00000)        /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */
+#define  GPIO_CRL_CNF5_0                     ((uint32_t)0x00400000)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF5_1                     ((uint32_t)0x00800000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF6                       ((uint32_t)0x0C000000)        /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */
+#define  GPIO_CRL_CNF6_0                     ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF6_1                     ((uint32_t)0x08000000)        /*!< Bit 1 */
+
+#define  GPIO_CRL_CNF7                       ((uint32_t)0xC0000000)        /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */
+#define  GPIO_CRL_CNF7_0                     ((uint32_t)0x40000000)        /*!< Bit 0 */
+#define  GPIO_CRL_CNF7_1                     ((uint32_t)0x80000000)        /*!< Bit 1 */
+
+/*******************  Bit definition for GPIO_CRH register  *******************/
+#define  GPIO_CRH_MODE                       ((uint32_t)0x33333333)        /*!< Port x mode bits */
+
+#define  GPIO_CRH_MODE8                      ((uint32_t)0x00000003)        /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */
+#define  GPIO_CRH_MODE8_0                    ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE8_1                    ((uint32_t)0x00000002)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE9                      ((uint32_t)0x00000030)        /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */
+#define  GPIO_CRH_MODE9_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE9_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE10                     ((uint32_t)0x00000300)        /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */
+#define  GPIO_CRH_MODE10_0                   ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE10_1                   ((uint32_t)0x00000200)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE11                     ((uint32_t)0x00003000)        /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */
+#define  GPIO_CRH_MODE11_0                   ((uint32_t)0x00001000)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE11_1                   ((uint32_t)0x00002000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE12                     ((uint32_t)0x00030000)        /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */
+#define  GPIO_CRH_MODE12_0                   ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE12_1                   ((uint32_t)0x00020000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE13                     ((uint32_t)0x00300000)        /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */
+#define  GPIO_CRH_MODE13_0                   ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE13_1                   ((uint32_t)0x00200000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE14                     ((uint32_t)0x03000000)        /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */
+#define  GPIO_CRH_MODE14_0                   ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE14_1                   ((uint32_t)0x02000000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_MODE15                     ((uint32_t)0x30000000)        /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */
+#define  GPIO_CRH_MODE15_0                   ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  GPIO_CRH_MODE15_1                   ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF                        ((uint32_t)0xCCCCCCCC)        /*!< Port x configuration bits */
+
+#define  GPIO_CRH_CNF8                       ((uint32_t)0x0000000C)        /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */
+#define  GPIO_CRH_CNF8_0                     ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF8_1                     ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF9                       ((uint32_t)0x000000C0)        /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */
+#define  GPIO_CRH_CNF9_0                     ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF9_1                     ((uint32_t)0x00000080)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF10                      ((uint32_t)0x00000C00)        /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */
+#define  GPIO_CRH_CNF10_0                    ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF10_1                    ((uint32_t)0x00000800)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF11                      ((uint32_t)0x0000C000)        /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */
+#define  GPIO_CRH_CNF11_0                    ((uint32_t)0x00004000)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF11_1                    ((uint32_t)0x00008000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF12                      ((uint32_t)0x000C0000)        /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */
+#define  GPIO_CRH_CNF12_0                    ((uint32_t)0x00040000)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF12_1                    ((uint32_t)0x00080000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF13                      ((uint32_t)0x00C00000)        /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */
+#define  GPIO_CRH_CNF13_0                    ((uint32_t)0x00400000)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF13_1                    ((uint32_t)0x00800000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF14                      ((uint32_t)0x0C000000)        /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */
+#define  GPIO_CRH_CNF14_0                    ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF14_1                    ((uint32_t)0x08000000)        /*!< Bit 1 */
+
+#define  GPIO_CRH_CNF15                      ((uint32_t)0xC0000000)        /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */
+#define  GPIO_CRH_CNF15_0                    ((uint32_t)0x40000000)        /*!< Bit 0 */
+#define  GPIO_CRH_CNF15_1                    ((uint32_t)0x80000000)        /*!< Bit 1 */
+
+/*!<******************  Bit definition for GPIO_IDR register  *******************/
+#define GPIO_IDR_IDR0                        ((uint16_t)0x0001)            /*!< Port input data, bit 0 */
+#define GPIO_IDR_IDR1                        ((uint16_t)0x0002)            /*!< Port input data, bit 1 */
+#define GPIO_IDR_IDR2                        ((uint16_t)0x0004)            /*!< Port input data, bit 2 */
+#define GPIO_IDR_IDR3                        ((uint16_t)0x0008)            /*!< Port input data, bit 3 */
+#define GPIO_IDR_IDR4                        ((uint16_t)0x0010)            /*!< Port input data, bit 4 */
+#define GPIO_IDR_IDR5                        ((uint16_t)0x0020)            /*!< Port input data, bit 5 */
+#define GPIO_IDR_IDR6                        ((uint16_t)0x0040)            /*!< Port input data, bit 6 */
+#define GPIO_IDR_IDR7                        ((uint16_t)0x0080)            /*!< Port input data, bit 7 */
+#define GPIO_IDR_IDR8                        ((uint16_t)0x0100)            /*!< Port input data, bit 8 */
+#define GPIO_IDR_IDR9                        ((uint16_t)0x0200)            /*!< Port input data, bit 9 */
+#define GPIO_IDR_IDR10                       ((uint16_t)0x0400)            /*!< Port input data, bit 10 */
+#define GPIO_IDR_IDR11                       ((uint16_t)0x0800)            /*!< Port input data, bit 11 */
+#define GPIO_IDR_IDR12                       ((uint16_t)0x1000)            /*!< Port input data, bit 12 */
+#define GPIO_IDR_IDR13                       ((uint16_t)0x2000)            /*!< Port input data, bit 13 */
+#define GPIO_IDR_IDR14                       ((uint16_t)0x4000)            /*!< Port input data, bit 14 */
+#define GPIO_IDR_IDR15                       ((uint16_t)0x8000)            /*!< Port input data, bit 15 */
+
+/*******************  Bit definition for GPIO_ODR register  *******************/
+#define GPIO_ODR_ODR0                        ((uint16_t)0x0001)            /*!< Port output data, bit 0 */
+#define GPIO_ODR_ODR1                        ((uint16_t)0x0002)            /*!< Port output data, bit 1 */
+#define GPIO_ODR_ODR2                        ((uint16_t)0x0004)            /*!< Port output data, bit 2 */
+#define GPIO_ODR_ODR3                        ((uint16_t)0x0008)            /*!< Port output data, bit 3 */
+#define GPIO_ODR_ODR4                        ((uint16_t)0x0010)            /*!< Port output data, bit 4 */
+#define GPIO_ODR_ODR5                        ((uint16_t)0x0020)            /*!< Port output data, bit 5 */
+#define GPIO_ODR_ODR6                        ((uint16_t)0x0040)            /*!< Port output data, bit 6 */
+#define GPIO_ODR_ODR7                        ((uint16_t)0x0080)            /*!< Port output data, bit 7 */
+#define GPIO_ODR_ODR8                        ((uint16_t)0x0100)            /*!< Port output data, bit 8 */
+#define GPIO_ODR_ODR9                        ((uint16_t)0x0200)            /*!< Port output data, bit 9 */
+#define GPIO_ODR_ODR10                       ((uint16_t)0x0400)            /*!< Port output data, bit 10 */
+#define GPIO_ODR_ODR11                       ((uint16_t)0x0800)            /*!< Port output data, bit 11 */
+#define GPIO_ODR_ODR12                       ((uint16_t)0x1000)            /*!< Port output data, bit 12 */
+#define GPIO_ODR_ODR13                       ((uint16_t)0x2000)            /*!< Port output data, bit 13 */
+#define GPIO_ODR_ODR14                       ((uint16_t)0x4000)            /*!< Port output data, bit 14 */
+#define GPIO_ODR_ODR15                       ((uint16_t)0x8000)            /*!< Port output data, bit 15 */
+
+/******************  Bit definition for GPIO_BSRR register  *******************/
+#define GPIO_BSRR_BS0                        ((uint32_t)0x00000001)        /*!< Port x Set bit 0 */
+#define GPIO_BSRR_BS1                        ((uint32_t)0x00000002)        /*!< Port x Set bit 1 */
+#define GPIO_BSRR_BS2                        ((uint32_t)0x00000004)        /*!< Port x Set bit 2 */
+#define GPIO_BSRR_BS3                        ((uint32_t)0x00000008)        /*!< Port x Set bit 3 */
+#define GPIO_BSRR_BS4                        ((uint32_t)0x00000010)        /*!< Port x Set bit 4 */
+#define GPIO_BSRR_BS5                        ((uint32_t)0x00000020)        /*!< Port x Set bit 5 */
+#define GPIO_BSRR_BS6                        ((uint32_t)0x00000040)        /*!< Port x Set bit 6 */
+#define GPIO_BSRR_BS7                        ((uint32_t)0x00000080)        /*!< Port x Set bit 7 */
+#define GPIO_BSRR_BS8                        ((uint32_t)0x00000100)        /*!< Port x Set bit 8 */
+#define GPIO_BSRR_BS9                        ((uint32_t)0x00000200)        /*!< Port x Set bit 9 */
+#define GPIO_BSRR_BS10                       ((uint32_t)0x00000400)        /*!< Port x Set bit 10 */
+#define GPIO_BSRR_BS11                       ((uint32_t)0x00000800)        /*!< Port x Set bit 11 */
+#define GPIO_BSRR_BS12                       ((uint32_t)0x00001000)        /*!< Port x Set bit 12 */
+#define GPIO_BSRR_BS13                       ((uint32_t)0x00002000)        /*!< Port x Set bit 13 */
+#define GPIO_BSRR_BS14                       ((uint32_t)0x00004000)        /*!< Port x Set bit 14 */
+#define GPIO_BSRR_BS15                       ((uint32_t)0x00008000)        /*!< Port x Set bit 15 */
+
+#define GPIO_BSRR_BR0                        ((uint32_t)0x00010000)        /*!< Port x Reset bit 0 */
+#define GPIO_BSRR_BR1                        ((uint32_t)0x00020000)        /*!< Port x Reset bit 1 */
+#define GPIO_BSRR_BR2                        ((uint32_t)0x00040000)        /*!< Port x Reset bit 2 */
+#define GPIO_BSRR_BR3                        ((uint32_t)0x00080000)        /*!< Port x Reset bit 3 */
+#define GPIO_BSRR_BR4                        ((uint32_t)0x00100000)        /*!< Port x Reset bit 4 */
+#define GPIO_BSRR_BR5                        ((uint32_t)0x00200000)        /*!< Port x Reset bit 5 */
+#define GPIO_BSRR_BR6                        ((uint32_t)0x00400000)        /*!< Port x Reset bit 6 */
+#define GPIO_BSRR_BR7                        ((uint32_t)0x00800000)        /*!< Port x Reset bit 7 */
+#define GPIO_BSRR_BR8                        ((uint32_t)0x01000000)        /*!< Port x Reset bit 8 */
+#define GPIO_BSRR_BR9                        ((uint32_t)0x02000000)        /*!< Port x Reset bit 9 */
+#define GPIO_BSRR_BR10                       ((uint32_t)0x04000000)        /*!< Port x Reset bit 10 */
+#define GPIO_BSRR_BR11                       ((uint32_t)0x08000000)        /*!< Port x Reset bit 11 */
+#define GPIO_BSRR_BR12                       ((uint32_t)0x10000000)        /*!< Port x Reset bit 12 */
+#define GPIO_BSRR_BR13                       ((uint32_t)0x20000000)        /*!< Port x Reset bit 13 */
+#define GPIO_BSRR_BR14                       ((uint32_t)0x40000000)        /*!< Port x Reset bit 14 */
+#define GPIO_BSRR_BR15                       ((uint32_t)0x80000000)        /*!< Port x Reset bit 15 */
+
+/*******************  Bit definition for GPIO_BRR register  *******************/
+#define GPIO_BRR_BR0                         ((uint16_t)0x0001)            /*!< Port x Reset bit 0 */
+#define GPIO_BRR_BR1                         ((uint16_t)0x0002)            /*!< Port x Reset bit 1 */
+#define GPIO_BRR_BR2                         ((uint16_t)0x0004)            /*!< Port x Reset bit 2 */
+#define GPIO_BRR_BR3                         ((uint16_t)0x0008)            /*!< Port x Reset bit 3 */
+#define GPIO_BRR_BR4                         ((uint16_t)0x0010)            /*!< Port x Reset bit 4 */
+#define GPIO_BRR_BR5                         ((uint16_t)0x0020)            /*!< Port x Reset bit 5 */
+#define GPIO_BRR_BR6                         ((uint16_t)0x0040)            /*!< Port x Reset bit 6 */
+#define GPIO_BRR_BR7                         ((uint16_t)0x0080)            /*!< Port x Reset bit 7 */
+#define GPIO_BRR_BR8                         ((uint16_t)0x0100)            /*!< Port x Reset bit 8 */
+#define GPIO_BRR_BR9                         ((uint16_t)0x0200)            /*!< Port x Reset bit 9 */
+#define GPIO_BRR_BR10                        ((uint16_t)0x0400)            /*!< Port x Reset bit 10 */
+#define GPIO_BRR_BR11                        ((uint16_t)0x0800)            /*!< Port x Reset bit 11 */
+#define GPIO_BRR_BR12                        ((uint16_t)0x1000)            /*!< Port x Reset bit 12 */
+#define GPIO_BRR_BR13                        ((uint16_t)0x2000)            /*!< Port x Reset bit 13 */
+#define GPIO_BRR_BR14                        ((uint16_t)0x4000)            /*!< Port x Reset bit 14 */
+#define GPIO_BRR_BR15                        ((uint16_t)0x8000)            /*!< Port x Reset bit 15 */
+
+/******************  Bit definition for GPIO_LCKR register  *******************/
+#define GPIO_LCKR_LCK0                       ((uint32_t)0x00000001)        /*!< Port x Lock bit 0 */
+#define GPIO_LCKR_LCK1                       ((uint32_t)0x00000002)        /*!< Port x Lock bit 1 */
+#define GPIO_LCKR_LCK2                       ((uint32_t)0x00000004)        /*!< Port x Lock bit 2 */
+#define GPIO_LCKR_LCK3                       ((uint32_t)0x00000008)        /*!< Port x Lock bit 3 */
+#define GPIO_LCKR_LCK4                       ((uint32_t)0x00000010)        /*!< Port x Lock bit 4 */
+#define GPIO_LCKR_LCK5                       ((uint32_t)0x00000020)        /*!< Port x Lock bit 5 */
+#define GPIO_LCKR_LCK6                       ((uint32_t)0x00000040)        /*!< Port x Lock bit 6 */
+#define GPIO_LCKR_LCK7                       ((uint32_t)0x00000080)        /*!< Port x Lock bit 7 */
+#define GPIO_LCKR_LCK8                       ((uint32_t)0x00000100)        /*!< Port x Lock bit 8 */
+#define GPIO_LCKR_LCK9                       ((uint32_t)0x00000200)        /*!< Port x Lock bit 9 */
+#define GPIO_LCKR_LCK10                      ((uint32_t)0x00000400)        /*!< Port x Lock bit 10 */
+#define GPIO_LCKR_LCK11                      ((uint32_t)0x00000800)        /*!< Port x Lock bit 11 */
+#define GPIO_LCKR_LCK12                      ((uint32_t)0x00001000)        /*!< Port x Lock bit 12 */
+#define GPIO_LCKR_LCK13                      ((uint32_t)0x00002000)        /*!< Port x Lock bit 13 */
+#define GPIO_LCKR_LCK14                      ((uint32_t)0x00004000)        /*!< Port x Lock bit 14 */
+#define GPIO_LCKR_LCK15                      ((uint32_t)0x00008000)        /*!< Port x Lock bit 15 */
+#define GPIO_LCKR_LCKK                       ((uint32_t)0x00010000)        /*!< Lock key */
+
+/*----------------------------------------------------------------------------*/
+
+/******************  Bit definition for AFIO_EVCR register  *******************/
+#define AFIO_EVCR_PIN                        ((uint8_t)0x0F)               /*!< PIN[3:0] bits (Pin selection) */
+#define AFIO_EVCR_PIN_0                      ((uint8_t)0x01)               /*!< Bit 0 */
+#define AFIO_EVCR_PIN_1                      ((uint8_t)0x02)               /*!< Bit 1 */
+#define AFIO_EVCR_PIN_2                      ((uint8_t)0x04)               /*!< Bit 2 */
+#define AFIO_EVCR_PIN_3                      ((uint8_t)0x08)               /*!< Bit 3 */
+
+/*!< PIN configuration */
+#define AFIO_EVCR_PIN_PX0                    ((uint8_t)0x00)               /*!< Pin 0 selected */
+#define AFIO_EVCR_PIN_PX1                    ((uint8_t)0x01)               /*!< Pin 1 selected */
+#define AFIO_EVCR_PIN_PX2                    ((uint8_t)0x02)               /*!< Pin 2 selected */
+#define AFIO_EVCR_PIN_PX3                    ((uint8_t)0x03)               /*!< Pin 3 selected */
+#define AFIO_EVCR_PIN_PX4                    ((uint8_t)0x04)               /*!< Pin 4 selected */
+#define AFIO_EVCR_PIN_PX5                    ((uint8_t)0x05)               /*!< Pin 5 selected */
+#define AFIO_EVCR_PIN_PX6                    ((uint8_t)0x06)               /*!< Pin 6 selected */
+#define AFIO_EVCR_PIN_PX7                    ((uint8_t)0x07)               /*!< Pin 7 selected */
+#define AFIO_EVCR_PIN_PX8                    ((uint8_t)0x08)               /*!< Pin 8 selected */
+#define AFIO_EVCR_PIN_PX9                    ((uint8_t)0x09)               /*!< Pin 9 selected */
+#define AFIO_EVCR_PIN_PX10                   ((uint8_t)0x0A)               /*!< Pin 10 selected */
+#define AFIO_EVCR_PIN_PX11                   ((uint8_t)0x0B)               /*!< Pin 11 selected */
+#define AFIO_EVCR_PIN_PX12                   ((uint8_t)0x0C)               /*!< Pin 12 selected */
+#define AFIO_EVCR_PIN_PX13                   ((uint8_t)0x0D)               /*!< Pin 13 selected */
+#define AFIO_EVCR_PIN_PX14                   ((uint8_t)0x0E)               /*!< Pin 14 selected */
+#define AFIO_EVCR_PIN_PX15                   ((uint8_t)0x0F)               /*!< Pin 15 selected */
+
+#define AFIO_EVCR_PORT                       ((uint8_t)0x70)               /*!< PORT[2:0] bits (Port selection) */
+#define AFIO_EVCR_PORT_0                     ((uint8_t)0x10)               /*!< Bit 0 */
+#define AFIO_EVCR_PORT_1                     ((uint8_t)0x20)               /*!< Bit 1 */
+#define AFIO_EVCR_PORT_2                     ((uint8_t)0x40)               /*!< Bit 2 */
+
+/*!< PORT configuration */
+#define AFIO_EVCR_PORT_PA                    ((uint8_t)0x00)               /*!< Port A selected */
+#define AFIO_EVCR_PORT_PB                    ((uint8_t)0x10)               /*!< Port B selected */
+#define AFIO_EVCR_PORT_PC                    ((uint8_t)0x20)               /*!< Port C selected */
+#define AFIO_EVCR_PORT_PD                    ((uint8_t)0x30)               /*!< Port D selected */
+#define AFIO_EVCR_PORT_PE                    ((uint8_t)0x40)               /*!< Port E selected */
+
+#define AFIO_EVCR_EVOE                       ((uint8_t)0x80)               /*!< Event Output Enable */
+
+/******************  Bit definition for AFIO_MAPR register  *******************/
+#define AFIO_MAPR_SPI1_REMAP                 ((uint32_t)0x00000001)        /*!< SPI1 remapping */
+#define AFIO_MAPR_I2C1_REMAP                 ((uint32_t)0x00000002)        /*!< I2C1 remapping */
+#define AFIO_MAPR_USART1_REMAP               ((uint32_t)0x00000004)        /*!< USART1 remapping */
+#define AFIO_MAPR_USART2_REMAP               ((uint32_t)0x00000008)        /*!< USART2 remapping */
+
+#define AFIO_MAPR_USART3_REMAP               ((uint32_t)0x00000030)        /*!< USART3_REMAP[1:0] bits (USART3 remapping) */
+#define AFIO_MAPR_USART3_REMAP_0             ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define AFIO_MAPR_USART3_REMAP_1             ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+/* USART3_REMAP configuration */
+#define AFIO_MAPR_USART3_REMAP_NOREMAP       ((uint32_t)0x00000000)        /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */
+#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP  ((uint32_t)0x00000010)        /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */
+#define AFIO_MAPR_USART3_REMAP_FULLREMAP     ((uint32_t)0x00000030)        /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */
+
+#define AFIO_MAPR_TIM1_REMAP                 ((uint32_t)0x000000C0)        /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */
+#define AFIO_MAPR_TIM1_REMAP_0               ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define AFIO_MAPR_TIM1_REMAP_1               ((uint32_t)0x00000080)        /*!< Bit 1 */
+
+/*!< TIM1_REMAP configuration */
+#define AFIO_MAPR_TIM1_REMAP_NOREMAP         ((uint32_t)0x00000000)        /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */
+#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP    ((uint32_t)0x00000040)        /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */
+#define AFIO_MAPR_TIM1_REMAP_FULLREMAP       ((uint32_t)0x000000C0)        /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */
+
+#define AFIO_MAPR_TIM2_REMAP                 ((uint32_t)0x00000300)        /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */
+#define AFIO_MAPR_TIM2_REMAP_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define AFIO_MAPR_TIM2_REMAP_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+
+/*!< TIM2_REMAP configuration */
+#define AFIO_MAPR_TIM2_REMAP_NOREMAP         ((uint32_t)0x00000000)        /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */
+#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1   ((uint32_t)0x00000100)        /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */
+#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2   ((uint32_t)0x00000200)        /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */
+#define AFIO_MAPR_TIM2_REMAP_FULLREMAP       ((uint32_t)0x00000300)        /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */
+
+#define AFIO_MAPR_TIM3_REMAP                 ((uint32_t)0x00000C00)        /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */
+#define AFIO_MAPR_TIM3_REMAP_0               ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define AFIO_MAPR_TIM3_REMAP_1               ((uint32_t)0x00000800)        /*!< Bit 1 */
+
+/*!< TIM3_REMAP configuration */
+#define AFIO_MAPR_TIM3_REMAP_NOREMAP         ((uint32_t)0x00000000)        /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */
+#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP    ((uint32_t)0x00000800)        /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */
+#define AFIO_MAPR_TIM3_REMAP_FULLREMAP       ((uint32_t)0x00000C00)        /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */
+
+#define AFIO_MAPR_TIM4_REMAP                 ((uint32_t)0x00001000)        /*!< TIM4_REMAP bit (TIM4 remapping) */
+
+#define AFIO_MAPR_CAN_REMAP                  ((uint32_t)0x00006000)        /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */
+#define AFIO_MAPR_CAN_REMAP_0                ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define AFIO_MAPR_CAN_REMAP_1                ((uint32_t)0x00004000)        /*!< Bit 1 */
+
+/*!< CAN_REMAP configuration */
+#define AFIO_MAPR_CAN_REMAP_REMAP1           ((uint32_t)0x00000000)        /*!< CANRX mapped to PA11, CANTX mapped to PA12 */
+#define AFIO_MAPR_CAN_REMAP_REMAP2           ((uint32_t)0x00004000)        /*!< CANRX mapped to PB8, CANTX mapped to PB9 */
+#define AFIO_MAPR_CAN_REMAP_REMAP3           ((uint32_t)0x00006000)        /*!< CANRX mapped to PD0, CANTX mapped to PD1 */
+
+#define AFIO_MAPR_PD01_REMAP                 ((uint32_t)0x00008000)        /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */
+#define AFIO_MAPR_TIM5CH4_IREMAP             ((uint32_t)0x00010000)        /*!< TIM5 Channel4 Internal Remap */
+#define AFIO_MAPR_ADC1_ETRGINJ_REMAP         ((uint32_t)0x00020000)        /*!< ADC 1 External Trigger Injected Conversion remapping */
+#define AFIO_MAPR_ADC1_ETRGREG_REMAP         ((uint32_t)0x00040000)        /*!< ADC 1 External Trigger Regular Conversion remapping */
+#define AFIO_MAPR_ADC2_ETRGINJ_REMAP         ((uint32_t)0x00080000)        /*!< ADC 2 External Trigger Injected Conversion remapping */
+#define AFIO_MAPR_ADC2_ETRGREG_REMAP         ((uint32_t)0x00100000)        /*!< ADC 2 External Trigger Regular Conversion remapping */
+
+/*!< SWJ_CFG configuration */
+#define AFIO_MAPR_SWJ_CFG                    ((uint32_t)0x07000000)        /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */
+#define AFIO_MAPR_SWJ_CFG_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define AFIO_MAPR_SWJ_CFG_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define AFIO_MAPR_SWJ_CFG_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+
+#define AFIO_MAPR_SWJ_CFG_RESET              ((uint32_t)0x00000000)        /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */
+#define AFIO_MAPR_SWJ_CFG_NOJNTRST           ((uint32_t)0x01000000)        /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */
+#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE        ((uint32_t)0x02000000)        /*!< JTAG-DP Disabled and SW-DP Enabled */
+#define AFIO_MAPR_SWJ_CFG_DISABLE            ((uint32_t)0x04000000)        /*!< JTAG-DP Disabled and SW-DP Disabled */
+
+#ifdef STM32F10X_CL
+/*!< ETH_REMAP configuration */
+ #define AFIO_MAPR_ETH_REMAP                  ((uint32_t)0x00200000)        /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */
+
+/*!< CAN2_REMAP configuration */
+ #define AFIO_MAPR_CAN2_REMAP                 ((uint32_t)0x00400000)        /*!< CAN2_REMAP bit (CAN2 I/O remapping) */
+
+/*!< MII_RMII_SEL configuration */
+ #define AFIO_MAPR_MII_RMII_SEL               ((uint32_t)0x00800000)        /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */
+
+/*!< SPI3_REMAP configuration */
+ #define AFIO_MAPR_SPI3_REMAP                 ((uint32_t)0x10000000)        /*!< SPI3_REMAP bit (SPI3 remapping) */
+
+/*!< TIM2ITR1_IREMAP configuration */
+ #define AFIO_MAPR_TIM2ITR1_IREMAP            ((uint32_t)0x20000000)        /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */
+
+/*!< PTP_PPS_REMAP configuration */
+ #define AFIO_MAPR_PTP_PPS_REMAP              ((uint32_t)0x40000000)        /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */
+#endif
+
+/*****************  Bit definition for AFIO_EXTICR1 register  *****************/
+#define AFIO_EXTICR1_EXTI0                   ((uint16_t)0x000F)            /*!< EXTI 0 configuration */
+#define AFIO_EXTICR1_EXTI1                   ((uint16_t)0x00F0)            /*!< EXTI 1 configuration */
+#define AFIO_EXTICR1_EXTI2                   ((uint16_t)0x0F00)            /*!< EXTI 2 configuration */
+#define AFIO_EXTICR1_EXTI3                   ((uint16_t)0xF000)            /*!< EXTI 3 configuration */
+
+/*!< EXTI0 configuration */
+#define AFIO_EXTICR1_EXTI0_PA                ((uint16_t)0x0000)            /*!< PA[0] pin */
+#define AFIO_EXTICR1_EXTI0_PB                ((uint16_t)0x0001)            /*!< PB[0] pin */
+#define AFIO_EXTICR1_EXTI0_PC                ((uint16_t)0x0002)            /*!< PC[0] pin */
+#define AFIO_EXTICR1_EXTI0_PD                ((uint16_t)0x0003)            /*!< PD[0] pin */
+#define AFIO_EXTICR1_EXTI0_PE                ((uint16_t)0x0004)            /*!< PE[0] pin */
+#define AFIO_EXTICR1_EXTI0_PF                ((uint16_t)0x0005)            /*!< PF[0] pin */
+#define AFIO_EXTICR1_EXTI0_PG                ((uint16_t)0x0006)            /*!< PG[0] pin */
+
+/*!< EXTI1 configuration */
+#define AFIO_EXTICR1_EXTI1_PA                ((uint16_t)0x0000)            /*!< PA[1] pin */
+#define AFIO_EXTICR1_EXTI1_PB                ((uint16_t)0x0010)            /*!< PB[1] pin */
+#define AFIO_EXTICR1_EXTI1_PC                ((uint16_t)0x0020)            /*!< PC[1] pin */
+#define AFIO_EXTICR1_EXTI1_PD                ((uint16_t)0x0030)            /*!< PD[1] pin */
+#define AFIO_EXTICR1_EXTI1_PE                ((uint16_t)0x0040)            /*!< PE[1] pin */
+#define AFIO_EXTICR1_EXTI1_PF                ((uint16_t)0x0050)            /*!< PF[1] pin */
+#define AFIO_EXTICR1_EXTI1_PG                ((uint16_t)0x0060)            /*!< PG[1] pin */
+
+/*!< EXTI2 configuration */  
+#define AFIO_EXTICR1_EXTI2_PA                ((uint16_t)0x0000)            /*!< PA[2] pin */
+#define AFIO_EXTICR1_EXTI2_PB                ((uint16_t)0x0100)            /*!< PB[2] pin */
+#define AFIO_EXTICR1_EXTI2_PC                ((uint16_t)0x0200)            /*!< PC[2] pin */
+#define AFIO_EXTICR1_EXTI2_PD                ((uint16_t)0x0300)            /*!< PD[2] pin */
+#define AFIO_EXTICR1_EXTI2_PE                ((uint16_t)0x0400)            /*!< PE[2] pin */
+#define AFIO_EXTICR1_EXTI2_PF                ((uint16_t)0x0500)            /*!< PF[2] pin */
+#define AFIO_EXTICR1_EXTI2_PG                ((uint16_t)0x0600)            /*!< PG[2] pin */
+
+/*!< EXTI3 configuration */
+#define AFIO_EXTICR1_EXTI3_PA                ((uint16_t)0x0000)            /*!< PA[3] pin */
+#define AFIO_EXTICR1_EXTI3_PB                ((uint16_t)0x1000)            /*!< PB[3] pin */
+#define AFIO_EXTICR1_EXTI3_PC                ((uint16_t)0x2000)            /*!< PC[3] pin */
+#define AFIO_EXTICR1_EXTI3_PD                ((uint16_t)0x3000)            /*!< PD[3] pin */
+#define AFIO_EXTICR1_EXTI3_PE                ((uint16_t)0x4000)            /*!< PE[3] pin */
+#define AFIO_EXTICR1_EXTI3_PF                ((uint16_t)0x5000)            /*!< PF[3] pin */
+#define AFIO_EXTICR1_EXTI3_PG                ((uint16_t)0x6000)            /*!< PG[3] pin */
+
+/*****************  Bit definition for AFIO_EXTICR2 register  *****************/
+#define AFIO_EXTICR2_EXTI4                   ((uint16_t)0x000F)            /*!< EXTI 4 configuration */
+#define AFIO_EXTICR2_EXTI5                   ((uint16_t)0x00F0)            /*!< EXTI 5 configuration */
+#define AFIO_EXTICR2_EXTI6                   ((uint16_t)0x0F00)            /*!< EXTI 6 configuration */
+#define AFIO_EXTICR2_EXTI7                   ((uint16_t)0xF000)            /*!< EXTI 7 configuration */
+
+/*!< EXTI4 configuration */
+#define AFIO_EXTICR2_EXTI4_PA                ((uint16_t)0x0000)            /*!< PA[4] pin */
+#define AFIO_EXTICR2_EXTI4_PB                ((uint16_t)0x0001)            /*!< PB[4] pin */
+#define AFIO_EXTICR2_EXTI4_PC                ((uint16_t)0x0002)            /*!< PC[4] pin */
+#define AFIO_EXTICR2_EXTI4_PD                ((uint16_t)0x0003)            /*!< PD[4] pin */
+#define AFIO_EXTICR2_EXTI4_PE                ((uint16_t)0x0004)            /*!< PE[4] pin */
+#define AFIO_EXTICR2_EXTI4_PF                ((uint16_t)0x0005)            /*!< PF[4] pin */
+#define AFIO_EXTICR2_EXTI4_PG                ((uint16_t)0x0006)            /*!< PG[4] pin */
+
+/* EXTI5 configuration */
+#define AFIO_EXTICR2_EXTI5_PA                ((uint16_t)0x0000)            /*!< PA[5] pin */
+#define AFIO_EXTICR2_EXTI5_PB                ((uint16_t)0x0010)            /*!< PB[5] pin */
+#define AFIO_EXTICR2_EXTI5_PC                ((uint16_t)0x0020)            /*!< PC[5] pin */
+#define AFIO_EXTICR2_EXTI5_PD                ((uint16_t)0x0030)            /*!< PD[5] pin */
+#define AFIO_EXTICR2_EXTI5_PE                ((uint16_t)0x0040)            /*!< PE[5] pin */
+#define AFIO_EXTICR2_EXTI5_PF                ((uint16_t)0x0050)            /*!< PF[5] pin */
+#define AFIO_EXTICR2_EXTI5_PG                ((uint16_t)0x0060)            /*!< PG[5] pin */
+
+/*!< EXTI6 configuration */  
+#define AFIO_EXTICR2_EXTI6_PA                ((uint16_t)0x0000)            /*!< PA[6] pin */
+#define AFIO_EXTICR2_EXTI6_PB                ((uint16_t)0x0100)            /*!< PB[6] pin */
+#define AFIO_EXTICR2_EXTI6_PC                ((uint16_t)0x0200)            /*!< PC[6] pin */
+#define AFIO_EXTICR2_EXTI6_PD                ((uint16_t)0x0300)            /*!< PD[6] pin */
+#define AFIO_EXTICR2_EXTI6_PE                ((uint16_t)0x0400)            /*!< PE[6] pin */
+#define AFIO_EXTICR2_EXTI6_PF                ((uint16_t)0x0500)            /*!< PF[6] pin */
+#define AFIO_EXTICR2_EXTI6_PG                ((uint16_t)0x0600)            /*!< PG[6] pin */
+
+/*!< EXTI7 configuration */
+#define AFIO_EXTICR2_EXTI7_PA                ((uint16_t)0x0000)            /*!< PA[7] pin */
+#define AFIO_EXTICR2_EXTI7_PB                ((uint16_t)0x1000)            /*!< PB[7] pin */
+#define AFIO_EXTICR2_EXTI7_PC                ((uint16_t)0x2000)            /*!< PC[7] pin */
+#define AFIO_EXTICR2_EXTI7_PD                ((uint16_t)0x3000)            /*!< PD[7] pin */
+#define AFIO_EXTICR2_EXTI7_PE                ((uint16_t)0x4000)            /*!< PE[7] pin */
+#define AFIO_EXTICR2_EXTI7_PF                ((uint16_t)0x5000)            /*!< PF[7] pin */
+#define AFIO_EXTICR2_EXTI7_PG                ((uint16_t)0x6000)            /*!< PG[7] pin */
+
+/*****************  Bit definition for AFIO_EXTICR3 register  *****************/
+#define AFIO_EXTICR3_EXTI8                   ((uint16_t)0x000F)            /*!< EXTI 8 configuration */
+#define AFIO_EXTICR3_EXTI9                   ((uint16_t)0x00F0)            /*!< EXTI 9 configuration */
+#define AFIO_EXTICR3_EXTI10                  ((uint16_t)0x0F00)            /*!< EXTI 10 configuration */
+#define AFIO_EXTICR3_EXTI11                  ((uint16_t)0xF000)            /*!< EXTI 11 configuration */
+
+/*!< EXTI8 configuration */
+#define AFIO_EXTICR3_EXTI8_PA                ((uint16_t)0x0000)            /*!< PA[8] pin */
+#define AFIO_EXTICR3_EXTI8_PB                ((uint16_t)0x0001)            /*!< PB[8] pin */
+#define AFIO_EXTICR3_EXTI8_PC                ((uint16_t)0x0002)            /*!< PC[8] pin */
+#define AFIO_EXTICR3_EXTI8_PD                ((uint16_t)0x0003)            /*!< PD[8] pin */
+#define AFIO_EXTICR3_EXTI8_PE                ((uint16_t)0x0004)            /*!< PE[8] pin */
+#define AFIO_EXTICR3_EXTI8_PF                ((uint16_t)0x0005)            /*!< PF[8] pin */
+#define AFIO_EXTICR3_EXTI8_PG                ((uint16_t)0x0006)            /*!< PG[8] pin */
+
+/*!< EXTI9 configuration */
+#define AFIO_EXTICR3_EXTI9_PA                ((uint16_t)0x0000)            /*!< PA[9] pin */
+#define AFIO_EXTICR3_EXTI9_PB                ((uint16_t)0x0010)            /*!< PB[9] pin */
+#define AFIO_EXTICR3_EXTI9_PC                ((uint16_t)0x0020)            /*!< PC[9] pin */
+#define AFIO_EXTICR3_EXTI9_PD                ((uint16_t)0x0030)            /*!< PD[9] pin */
+#define AFIO_EXTICR3_EXTI9_PE                ((uint16_t)0x0040)            /*!< PE[9] pin */
+#define AFIO_EXTICR3_EXTI9_PF                ((uint16_t)0x0050)            /*!< PF[9] pin */
+#define AFIO_EXTICR3_EXTI9_PG                ((uint16_t)0x0060)            /*!< PG[9] pin */
+
+/*!< EXTI10 configuration */  
+#define AFIO_EXTICR3_EXTI10_PA               ((uint16_t)0x0000)            /*!< PA[10] pin */
+#define AFIO_EXTICR3_EXTI10_PB               ((uint16_t)0x0100)            /*!< PB[10] pin */
+#define AFIO_EXTICR3_EXTI10_PC               ((uint16_t)0x0200)            /*!< PC[10] pin */
+#define AFIO_EXTICR3_EXTI10_PD               ((uint16_t)0x0300)            /*!< PD[10] pin */
+#define AFIO_EXTICR3_EXTI10_PE               ((uint16_t)0x0400)            /*!< PE[10] pin */
+#define AFIO_EXTICR3_EXTI10_PF               ((uint16_t)0x0500)            /*!< PF[10] pin */
+#define AFIO_EXTICR3_EXTI10_PG               ((uint16_t)0x0600)            /*!< PG[10] pin */
+
+/*!< EXTI11 configuration */
+#define AFIO_EXTICR3_EXTI11_PA               ((uint16_t)0x0000)            /*!< PA[11] pin */
+#define AFIO_EXTICR3_EXTI11_PB               ((uint16_t)0x1000)            /*!< PB[11] pin */
+#define AFIO_EXTICR3_EXTI11_PC               ((uint16_t)0x2000)            /*!< PC[11] pin */
+#define AFIO_EXTICR3_EXTI11_PD               ((uint16_t)0x3000)            /*!< PD[11] pin */
+#define AFIO_EXTICR3_EXTI11_PE               ((uint16_t)0x4000)            /*!< PE[11] pin */
+#define AFIO_EXTICR3_EXTI11_PF               ((uint16_t)0x5000)            /*!< PF[11] pin */
+#define AFIO_EXTICR3_EXTI11_PG               ((uint16_t)0x6000)            /*!< PG[11] pin */
+
+/*****************  Bit definition for AFIO_EXTICR4 register  *****************/
+#define AFIO_EXTICR4_EXTI12                  ((uint16_t)0x000F)            /*!< EXTI 12 configuration */
+#define AFIO_EXTICR4_EXTI13                  ((uint16_t)0x00F0)            /*!< EXTI 13 configuration */
+#define AFIO_EXTICR4_EXTI14                  ((uint16_t)0x0F00)            /*!< EXTI 14 configuration */
+#define AFIO_EXTICR4_EXTI15                  ((uint16_t)0xF000)            /*!< EXTI 15 configuration */
+
+/* EXTI12 configuration */
+#define AFIO_EXTICR4_EXTI12_PA               ((uint16_t)0x0000)            /*!< PA[12] pin */
+#define AFIO_EXTICR4_EXTI12_PB               ((uint16_t)0x0001)            /*!< PB[12] pin */
+#define AFIO_EXTICR4_EXTI12_PC               ((uint16_t)0x0002)            /*!< PC[12] pin */
+#define AFIO_EXTICR4_EXTI12_PD               ((uint16_t)0x0003)            /*!< PD[12] pin */
+#define AFIO_EXTICR4_EXTI12_PE               ((uint16_t)0x0004)            /*!< PE[12] pin */
+#define AFIO_EXTICR4_EXTI12_PF               ((uint16_t)0x0005)            /*!< PF[12] pin */
+#define AFIO_EXTICR4_EXTI12_PG               ((uint16_t)0x0006)            /*!< PG[12] pin */
+
+/* EXTI13 configuration */
+#define AFIO_EXTICR4_EXTI13_PA               ((uint16_t)0x0000)            /*!< PA[13] pin */
+#define AFIO_EXTICR4_EXTI13_PB               ((uint16_t)0x0010)            /*!< PB[13] pin */
+#define AFIO_EXTICR4_EXTI13_PC               ((uint16_t)0x0020)            /*!< PC[13] pin */
+#define AFIO_EXTICR4_EXTI13_PD               ((uint16_t)0x0030)            /*!< PD[13] pin */
+#define AFIO_EXTICR4_EXTI13_PE               ((uint16_t)0x0040)            /*!< PE[13] pin */
+#define AFIO_EXTICR4_EXTI13_PF               ((uint16_t)0x0050)            /*!< PF[13] pin */
+#define AFIO_EXTICR4_EXTI13_PG               ((uint16_t)0x0060)            /*!< PG[13] pin */
+
+/*!< EXTI14 configuration */  
+#define AFIO_EXTICR4_EXTI14_PA               ((uint16_t)0x0000)            /*!< PA[14] pin */
+#define AFIO_EXTICR4_EXTI14_PB               ((uint16_t)0x0100)            /*!< PB[14] pin */
+#define AFIO_EXTICR4_EXTI14_PC               ((uint16_t)0x0200)            /*!< PC[14] pin */
+#define AFIO_EXTICR4_EXTI14_PD               ((uint16_t)0x0300)            /*!< PD[14] pin */
+#define AFIO_EXTICR4_EXTI14_PE               ((uint16_t)0x0400)            /*!< PE[14] pin */
+#define AFIO_EXTICR4_EXTI14_PF               ((uint16_t)0x0500)            /*!< PF[14] pin */
+#define AFIO_EXTICR4_EXTI14_PG               ((uint16_t)0x0600)            /*!< PG[14] pin */
+
+/*!< EXTI15 configuration */
+#define AFIO_EXTICR4_EXTI15_PA               ((uint16_t)0x0000)            /*!< PA[15] pin */
+#define AFIO_EXTICR4_EXTI15_PB               ((uint16_t)0x1000)            /*!< PB[15] pin */
+#define AFIO_EXTICR4_EXTI15_PC               ((uint16_t)0x2000)            /*!< PC[15] pin */
+#define AFIO_EXTICR4_EXTI15_PD               ((uint16_t)0x3000)            /*!< PD[15] pin */
+#define AFIO_EXTICR4_EXTI15_PE               ((uint16_t)0x4000)            /*!< PE[15] pin */
+#define AFIO_EXTICR4_EXTI15_PF               ((uint16_t)0x5000)            /*!< PF[15] pin */
+#define AFIO_EXTICR4_EXTI15_PG               ((uint16_t)0x6000)            /*!< PG[15] pin */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+/******************  Bit definition for AFIO_MAPR2 register  ******************/
+#define AFIO_MAPR2_TIM15_REMAP               ((uint32_t)0x00000001)        /*!< TIM15 remapping */
+#define AFIO_MAPR2_TIM16_REMAP               ((uint32_t)0x00000002)        /*!< TIM16 remapping */
+#define AFIO_MAPR2_TIM17_REMAP               ((uint32_t)0x00000004)        /*!< TIM17 remapping */
+#define AFIO_MAPR2_CEC_REMAP                 ((uint32_t)0x00000008)        /*!< CEC remapping */
+#define AFIO_MAPR2_TIM1_DMA_REMAP            ((uint32_t)0x00000010)        /*!< TIM1_DMA remapping */
+#endif
+
+#ifdef STM32F10X_HD_VL
+#define AFIO_MAPR2_TIM13_REMAP               ((uint32_t)0x00000100)        /*!< TIM13 remapping */
+#define AFIO_MAPR2_TIM14_REMAP               ((uint32_t)0x00000200)        /*!< TIM14 remapping */
+#define AFIO_MAPR2_FSMC_NADV_REMAP           ((uint32_t)0x00000400)        /*!< FSMC NADV remapping */
+#define AFIO_MAPR2_TIM67_DAC_DMA_REMAP       ((uint32_t)0x00000800)        /*!< TIM6/TIM7 and DAC DMA remapping */
+#define AFIO_MAPR2_TIM12_REMAP               ((uint32_t)0x00001000)        /*!< TIM12 remapping */
+#define AFIO_MAPR2_MISC_REMAP                ((uint32_t)0x00002000)        /*!< Miscellaneous remapping */
+#endif
+
+#ifdef STM32F10X_XL 
+/******************  Bit definition for AFIO_MAPR2 register  ******************/
+#define AFIO_MAPR2_TIM9_REMAP                ((uint32_t)0x00000020)        /*!< TIM9 remapping */
+#define AFIO_MAPR2_TIM10_REMAP               ((uint32_t)0x00000040)        /*!< TIM10 remapping */
+#define AFIO_MAPR2_TIM11_REMAP               ((uint32_t)0x00000080)        /*!< TIM11 remapping */
+#define AFIO_MAPR2_TIM13_REMAP               ((uint32_t)0x00000100)        /*!< TIM13 remapping */
+#define AFIO_MAPR2_TIM14_REMAP               ((uint32_t)0x00000200)        /*!< TIM14 remapping */
+#define AFIO_MAPR2_FSMC_NADV_REMAP           ((uint32_t)0x00000400)        /*!< FSMC NADV remapping */
+#endif
+
+/******************************************************************************/
+/*                                                                            */
+/*                               SystemTick                                   */
+/*                                                                            */
+/******************************************************************************/
+
+/*****************  Bit definition for SysTick_CTRL register  *****************/
+#define  SysTick_CTRL_ENABLE                 ((uint32_t)0x00000001)        /*!< Counter enable */
+#define  SysTick_CTRL_TICKINT                ((uint32_t)0x00000002)        /*!< Counting down to 0 pends the SysTick handler */
+#define  SysTick_CTRL_CLKSOURCE              ((uint32_t)0x00000004)        /*!< Clock source */
+#define  SysTick_CTRL_COUNTFLAG              ((uint32_t)0x00010000)        /*!< Count Flag */
+
+/*****************  Bit definition for SysTick_LOAD register  *****************/
+#define  SysTick_LOAD_RELOAD                 ((uint32_t)0x00FFFFFF)        /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */
+
+/*****************  Bit definition for SysTick_VAL register  ******************/
+#define  SysTick_VAL_CURRENT                 ((uint32_t)0x00FFFFFF)        /*!< Current value at the time the register is accessed */
+
+/*****************  Bit definition for SysTick_CALIB register  ****************/
+#define  SysTick_CALIB_TENMS                 ((uint32_t)0x00FFFFFF)        /*!< Reload value to use for 10ms timing */
+#define  SysTick_CALIB_SKEW                  ((uint32_t)0x40000000)        /*!< Calibration value is not exactly 10 ms */
+#define  SysTick_CALIB_NOREF                 ((uint32_t)0x80000000)        /*!< The reference clock is not provided */
+
+/******************************************************************************/
+/*                                                                            */
+/*                  Nested Vectored Interrupt Controller                      */
+/*                                                                            */
+/******************************************************************************/
+
+/******************  Bit definition for NVIC_ISER register  *******************/
+#define  NVIC_ISER_SETENA                    ((uint32_t)0xFFFFFFFF)        /*!< Interrupt set enable bits */
+#define  NVIC_ISER_SETENA_0                  ((uint32_t)0x00000001)        /*!< bit 0 */
+#define  NVIC_ISER_SETENA_1                  ((uint32_t)0x00000002)        /*!< bit 1 */
+#define  NVIC_ISER_SETENA_2                  ((uint32_t)0x00000004)        /*!< bit 2 */
+#define  NVIC_ISER_SETENA_3                  ((uint32_t)0x00000008)        /*!< bit 3 */
+#define  NVIC_ISER_SETENA_4                  ((uint32_t)0x00000010)        /*!< bit 4 */
+#define  NVIC_ISER_SETENA_5                  ((uint32_t)0x00000020)        /*!< bit 5 */
+#define  NVIC_ISER_SETENA_6                  ((uint32_t)0x00000040)        /*!< bit 6 */
+#define  NVIC_ISER_SETENA_7                  ((uint32_t)0x00000080)        /*!< bit 7 */
+#define  NVIC_ISER_SETENA_8                  ((uint32_t)0x00000100)        /*!< bit 8 */
+#define  NVIC_ISER_SETENA_9                  ((uint32_t)0x00000200)        /*!< bit 9 */
+#define  NVIC_ISER_SETENA_10                 ((uint32_t)0x00000400)        /*!< bit 10 */
+#define  NVIC_ISER_SETENA_11                 ((uint32_t)0x00000800)        /*!< bit 11 */
+#define  NVIC_ISER_SETENA_12                 ((uint32_t)0x00001000)        /*!< bit 12 */
+#define  NVIC_ISER_SETENA_13                 ((uint32_t)0x00002000)        /*!< bit 13 */
+#define  NVIC_ISER_SETENA_14                 ((uint32_t)0x00004000)        /*!< bit 14 */
+#define  NVIC_ISER_SETENA_15                 ((uint32_t)0x00008000)        /*!< bit 15 */
+#define  NVIC_ISER_SETENA_16                 ((uint32_t)0x00010000)        /*!< bit 16 */
+#define  NVIC_ISER_SETENA_17                 ((uint32_t)0x00020000)        /*!< bit 17 */
+#define  NVIC_ISER_SETENA_18                 ((uint32_t)0x00040000)        /*!< bit 18 */
+#define  NVIC_ISER_SETENA_19                 ((uint32_t)0x00080000)        /*!< bit 19 */
+#define  NVIC_ISER_SETENA_20                 ((uint32_t)0x00100000)        /*!< bit 20 */
+#define  NVIC_ISER_SETENA_21                 ((uint32_t)0x00200000)        /*!< bit 21 */
+#define  NVIC_ISER_SETENA_22                 ((uint32_t)0x00400000)        /*!< bit 22 */
+#define  NVIC_ISER_SETENA_23                 ((uint32_t)0x00800000)        /*!< bit 23 */
+#define  NVIC_ISER_SETENA_24                 ((uint32_t)0x01000000)        /*!< bit 24 */
+#define  NVIC_ISER_SETENA_25                 ((uint32_t)0x02000000)        /*!< bit 25 */
+#define  NVIC_ISER_SETENA_26                 ((uint32_t)0x04000000)        /*!< bit 26 */
+#define  NVIC_ISER_SETENA_27                 ((uint32_t)0x08000000)        /*!< bit 27 */
+#define  NVIC_ISER_SETENA_28                 ((uint32_t)0x10000000)        /*!< bit 28 */
+#define  NVIC_ISER_SETENA_29                 ((uint32_t)0x20000000)        /*!< bit 29 */
+#define  NVIC_ISER_SETENA_30                 ((uint32_t)0x40000000)        /*!< bit 30 */
+#define  NVIC_ISER_SETENA_31                 ((uint32_t)0x80000000)        /*!< bit 31 */
+
+/******************  Bit definition for NVIC_ICER register  *******************/
+#define  NVIC_ICER_CLRENA                   ((uint32_t)0xFFFFFFFF)        /*!< Interrupt clear-enable bits */
+#define  NVIC_ICER_CLRENA_0                  ((uint32_t)0x00000001)        /*!< bit 0 */
+#define  NVIC_ICER_CLRENA_1                  ((uint32_t)0x00000002)        /*!< bit 1 */
+#define  NVIC_ICER_CLRENA_2                  ((uint32_t)0x00000004)        /*!< bit 2 */
+#define  NVIC_ICER_CLRENA_3                  ((uint32_t)0x00000008)        /*!< bit 3 */
+#define  NVIC_ICER_CLRENA_4                  ((uint32_t)0x00000010)        /*!< bit 4 */
+#define  NVIC_ICER_CLRENA_5                  ((uint32_t)0x00000020)        /*!< bit 5 */
+#define  NVIC_ICER_CLRENA_6                  ((uint32_t)0x00000040)        /*!< bit 6 */
+#define  NVIC_ICER_CLRENA_7                  ((uint32_t)0x00000080)        /*!< bit 7 */
+#define  NVIC_ICER_CLRENA_8                  ((uint32_t)0x00000100)        /*!< bit 8 */
+#define  NVIC_ICER_CLRENA_9                  ((uint32_t)0x00000200)        /*!< bit 9 */
+#define  NVIC_ICER_CLRENA_10                 ((uint32_t)0x00000400)        /*!< bit 10 */
+#define  NVIC_ICER_CLRENA_11                 ((uint32_t)0x00000800)        /*!< bit 11 */
+#define  NVIC_ICER_CLRENA_12                 ((uint32_t)0x00001000)        /*!< bit 12 */
+#define  NVIC_ICER_CLRENA_13                 ((uint32_t)0x00002000)        /*!< bit 13 */
+#define  NVIC_ICER_CLRENA_14                 ((uint32_t)0x00004000)        /*!< bit 14 */
+#define  NVIC_ICER_CLRENA_15                 ((uint32_t)0x00008000)        /*!< bit 15 */
+#define  NVIC_ICER_CLRENA_16                 ((uint32_t)0x00010000)        /*!< bit 16 */
+#define  NVIC_ICER_CLRENA_17                 ((uint32_t)0x00020000)        /*!< bit 17 */
+#define  NVIC_ICER_CLRENA_18                 ((uint32_t)0x00040000)        /*!< bit 18 */
+#define  NVIC_ICER_CLRENA_19                 ((uint32_t)0x00080000)        /*!< bit 19 */
+#define  NVIC_ICER_CLRENA_20                 ((uint32_t)0x00100000)        /*!< bit 20 */
+#define  NVIC_ICER_CLRENA_21                 ((uint32_t)0x00200000)        /*!< bit 21 */
+#define  NVIC_ICER_CLRENA_22                 ((uint32_t)0x00400000)        /*!< bit 22 */
+#define  NVIC_ICER_CLRENA_23                 ((uint32_t)0x00800000)        /*!< bit 23 */
+#define  NVIC_ICER_CLRENA_24                 ((uint32_t)0x01000000)        /*!< bit 24 */
+#define  NVIC_ICER_CLRENA_25                 ((uint32_t)0x02000000)        /*!< bit 25 */
+#define  NVIC_ICER_CLRENA_26                 ((uint32_t)0x04000000)        /*!< bit 26 */
+#define  NVIC_ICER_CLRENA_27                 ((uint32_t)0x08000000)        /*!< bit 27 */
+#define  NVIC_ICER_CLRENA_28                 ((uint32_t)0x10000000)        /*!< bit 28 */
+#define  NVIC_ICER_CLRENA_29                 ((uint32_t)0x20000000)        /*!< bit 29 */
+#define  NVIC_ICER_CLRENA_30                 ((uint32_t)0x40000000)        /*!< bit 30 */
+#define  NVIC_ICER_CLRENA_31                 ((uint32_t)0x80000000)        /*!< bit 31 */
+
+/******************  Bit definition for NVIC_ISPR register  *******************/
+#define  NVIC_ISPR_SETPEND                   ((uint32_t)0xFFFFFFFF)        /*!< Interrupt set-pending bits */
+#define  NVIC_ISPR_SETPEND_0                 ((uint32_t)0x00000001)        /*!< bit 0 */
+#define  NVIC_ISPR_SETPEND_1                 ((uint32_t)0x00000002)        /*!< bit 1 */
+#define  NVIC_ISPR_SETPEND_2                 ((uint32_t)0x00000004)        /*!< bit 2 */
+#define  NVIC_ISPR_SETPEND_3                 ((uint32_t)0x00000008)        /*!< bit 3 */
+#define  NVIC_ISPR_SETPEND_4                 ((uint32_t)0x00000010)        /*!< bit 4 */
+#define  NVIC_ISPR_SETPEND_5                 ((uint32_t)0x00000020)        /*!< bit 5 */
+#define  NVIC_ISPR_SETPEND_6                 ((uint32_t)0x00000040)        /*!< bit 6 */
+#define  NVIC_ISPR_SETPEND_7                 ((uint32_t)0x00000080)        /*!< bit 7 */
+#define  NVIC_ISPR_SETPEND_8                 ((uint32_t)0x00000100)        /*!< bit 8 */
+#define  NVIC_ISPR_SETPEND_9                 ((uint32_t)0x00000200)        /*!< bit 9 */
+#define  NVIC_ISPR_SETPEND_10                ((uint32_t)0x00000400)        /*!< bit 10 */
+#define  NVIC_ISPR_SETPEND_11                ((uint32_t)0x00000800)        /*!< bit 11 */
+#define  NVIC_ISPR_SETPEND_12                ((uint32_t)0x00001000)        /*!< bit 12 */
+#define  NVIC_ISPR_SETPEND_13                ((uint32_t)0x00002000)        /*!< bit 13 */
+#define  NVIC_ISPR_SETPEND_14                ((uint32_t)0x00004000)        /*!< bit 14 */
+#define  NVIC_ISPR_SETPEND_15                ((uint32_t)0x00008000)        /*!< bit 15 */
+#define  NVIC_ISPR_SETPEND_16                ((uint32_t)0x00010000)        /*!< bit 16 */
+#define  NVIC_ISPR_SETPEND_17                ((uint32_t)0x00020000)        /*!< bit 17 */
+#define  NVIC_ISPR_SETPEND_18                ((uint32_t)0x00040000)        /*!< bit 18 */
+#define  NVIC_ISPR_SETPEND_19                ((uint32_t)0x00080000)        /*!< bit 19 */
+#define  NVIC_ISPR_SETPEND_20                ((uint32_t)0x00100000)        /*!< bit 20 */
+#define  NVIC_ISPR_SETPEND_21                ((uint32_t)0x00200000)        /*!< bit 21 */
+#define  NVIC_ISPR_SETPEND_22                ((uint32_t)0x00400000)        /*!< bit 22 */
+#define  NVIC_ISPR_SETPEND_23                ((uint32_t)0x00800000)        /*!< bit 23 */
+#define  NVIC_ISPR_SETPEND_24                ((uint32_t)0x01000000)        /*!< bit 24 */
+#define  NVIC_ISPR_SETPEND_25                ((uint32_t)0x02000000)        /*!< bit 25 */
+#define  NVIC_ISPR_SETPEND_26                ((uint32_t)0x04000000)        /*!< bit 26 */
+#define  NVIC_ISPR_SETPEND_27                ((uint32_t)0x08000000)        /*!< bit 27 */
+#define  NVIC_ISPR_SETPEND_28                ((uint32_t)0x10000000)        /*!< bit 28 */
+#define  NVIC_ISPR_SETPEND_29                ((uint32_t)0x20000000)        /*!< bit 29 */
+#define  NVIC_ISPR_SETPEND_30                ((uint32_t)0x40000000)        /*!< bit 30 */
+#define  NVIC_ISPR_SETPEND_31                ((uint32_t)0x80000000)        /*!< bit 31 */
+
+/******************  Bit definition for NVIC_ICPR register  *******************/
+#define  NVIC_ICPR_CLRPEND                   ((uint32_t)0xFFFFFFFF)        /*!< Interrupt clear-pending bits */
+#define  NVIC_ICPR_CLRPEND_0                 ((uint32_t)0x00000001)        /*!< bit 0 */
+#define  NVIC_ICPR_CLRPEND_1                 ((uint32_t)0x00000002)        /*!< bit 1 */
+#define  NVIC_ICPR_CLRPEND_2                 ((uint32_t)0x00000004)        /*!< bit 2 */
+#define  NVIC_ICPR_CLRPEND_3                 ((uint32_t)0x00000008)        /*!< bit 3 */
+#define  NVIC_ICPR_CLRPEND_4                 ((uint32_t)0x00000010)        /*!< bit 4 */
+#define  NVIC_ICPR_CLRPEND_5                 ((uint32_t)0x00000020)        /*!< bit 5 */
+#define  NVIC_ICPR_CLRPEND_6                 ((uint32_t)0x00000040)        /*!< bit 6 */
+#define  NVIC_ICPR_CLRPEND_7                 ((uint32_t)0x00000080)        /*!< bit 7 */
+#define  NVIC_ICPR_CLRPEND_8                 ((uint32_t)0x00000100)        /*!< bit 8 */
+#define  NVIC_ICPR_CLRPEND_9                 ((uint32_t)0x00000200)        /*!< bit 9 */
+#define  NVIC_ICPR_CLRPEND_10                ((uint32_t)0x00000400)        /*!< bit 10 */
+#define  NVIC_ICPR_CLRPEND_11                ((uint32_t)0x00000800)        /*!< bit 11 */
+#define  NVIC_ICPR_CLRPEND_12                ((uint32_t)0x00001000)        /*!< bit 12 */
+#define  NVIC_ICPR_CLRPEND_13                ((uint32_t)0x00002000)        /*!< bit 13 */
+#define  NVIC_ICPR_CLRPEND_14                ((uint32_t)0x00004000)        /*!< bit 14 */
+#define  NVIC_ICPR_CLRPEND_15                ((uint32_t)0x00008000)        /*!< bit 15 */
+#define  NVIC_ICPR_CLRPEND_16                ((uint32_t)0x00010000)        /*!< bit 16 */
+#define  NVIC_ICPR_CLRPEND_17                ((uint32_t)0x00020000)        /*!< bit 17 */
+#define  NVIC_ICPR_CLRPEND_18                ((uint32_t)0x00040000)        /*!< bit 18 */
+#define  NVIC_ICPR_CLRPEND_19                ((uint32_t)0x00080000)        /*!< bit 19 */
+#define  NVIC_ICPR_CLRPEND_20                ((uint32_t)0x00100000)        /*!< bit 20 */
+#define  NVIC_ICPR_CLRPEND_21                ((uint32_t)0x00200000)        /*!< bit 21 */
+#define  NVIC_ICPR_CLRPEND_22                ((uint32_t)0x00400000)        /*!< bit 22 */
+#define  NVIC_ICPR_CLRPEND_23                ((uint32_t)0x00800000)        /*!< bit 23 */
+#define  NVIC_ICPR_CLRPEND_24                ((uint32_t)0x01000000)        /*!< bit 24 */
+#define  NVIC_ICPR_CLRPEND_25                ((uint32_t)0x02000000)        /*!< bit 25 */
+#define  NVIC_ICPR_CLRPEND_26                ((uint32_t)0x04000000)        /*!< bit 26 */
+#define  NVIC_ICPR_CLRPEND_27                ((uint32_t)0x08000000)        /*!< bit 27 */
+#define  NVIC_ICPR_CLRPEND_28                ((uint32_t)0x10000000)        /*!< bit 28 */
+#define  NVIC_ICPR_CLRPEND_29                ((uint32_t)0x20000000)        /*!< bit 29 */
+#define  NVIC_ICPR_CLRPEND_30                ((uint32_t)0x40000000)        /*!< bit 30 */
+#define  NVIC_ICPR_CLRPEND_31                ((uint32_t)0x80000000)        /*!< bit 31 */
+
+/******************  Bit definition for NVIC_IABR register  *******************/
+#define  NVIC_IABR_ACTIVE                    ((uint32_t)0xFFFFFFFF)        /*!< Interrupt active flags */
+#define  NVIC_IABR_ACTIVE_0                  ((uint32_t)0x00000001)        /*!< bit 0 */
+#define  NVIC_IABR_ACTIVE_1                  ((uint32_t)0x00000002)        /*!< bit 1 */
+#define  NVIC_IABR_ACTIVE_2                  ((uint32_t)0x00000004)        /*!< bit 2 */
+#define  NVIC_IABR_ACTIVE_3                  ((uint32_t)0x00000008)        /*!< bit 3 */
+#define  NVIC_IABR_ACTIVE_4                  ((uint32_t)0x00000010)        /*!< bit 4 */
+#define  NVIC_IABR_ACTIVE_5                  ((uint32_t)0x00000020)        /*!< bit 5 */
+#define  NVIC_IABR_ACTIVE_6                  ((uint32_t)0x00000040)        /*!< bit 6 */
+#define  NVIC_IABR_ACTIVE_7                  ((uint32_t)0x00000080)        /*!< bit 7 */
+#define  NVIC_IABR_ACTIVE_8                  ((uint32_t)0x00000100)        /*!< bit 8 */
+#define  NVIC_IABR_ACTIVE_9                  ((uint32_t)0x00000200)        /*!< bit 9 */
+#define  NVIC_IABR_ACTIVE_10                 ((uint32_t)0x00000400)        /*!< bit 10 */
+#define  NVIC_IABR_ACTIVE_11                 ((uint32_t)0x00000800)        /*!< bit 11 */
+#define  NVIC_IABR_ACTIVE_12                 ((uint32_t)0x00001000)        /*!< bit 12 */
+#define  NVIC_IABR_ACTIVE_13                 ((uint32_t)0x00002000)        /*!< bit 13 */
+#define  NVIC_IABR_ACTIVE_14                 ((uint32_t)0x00004000)        /*!< bit 14 */
+#define  NVIC_IABR_ACTIVE_15                 ((uint32_t)0x00008000)        /*!< bit 15 */
+#define  NVIC_IABR_ACTIVE_16                 ((uint32_t)0x00010000)        /*!< bit 16 */
+#define  NVIC_IABR_ACTIVE_17                 ((uint32_t)0x00020000)        /*!< bit 17 */
+#define  NVIC_IABR_ACTIVE_18                 ((uint32_t)0x00040000)        /*!< bit 18 */
+#define  NVIC_IABR_ACTIVE_19                 ((uint32_t)0x00080000)        /*!< bit 19 */
+#define  NVIC_IABR_ACTIVE_20                 ((uint32_t)0x00100000)        /*!< bit 20 */
+#define  NVIC_IABR_ACTIVE_21                 ((uint32_t)0x00200000)        /*!< bit 21 */
+#define  NVIC_IABR_ACTIVE_22                 ((uint32_t)0x00400000)        /*!< bit 22 */
+#define  NVIC_IABR_ACTIVE_23                 ((uint32_t)0x00800000)        /*!< bit 23 */
+#define  NVIC_IABR_ACTIVE_24                 ((uint32_t)0x01000000)        /*!< bit 24 */
+#define  NVIC_IABR_ACTIVE_25                 ((uint32_t)0x02000000)        /*!< bit 25 */
+#define  NVIC_IABR_ACTIVE_26                 ((uint32_t)0x04000000)        /*!< bit 26 */
+#define  NVIC_IABR_ACTIVE_27                 ((uint32_t)0x08000000)        /*!< bit 27 */
+#define  NVIC_IABR_ACTIVE_28                 ((uint32_t)0x10000000)        /*!< bit 28 */
+#define  NVIC_IABR_ACTIVE_29                 ((uint32_t)0x20000000)        /*!< bit 29 */
+#define  NVIC_IABR_ACTIVE_30                 ((uint32_t)0x40000000)        /*!< bit 30 */
+#define  NVIC_IABR_ACTIVE_31                 ((uint32_t)0x80000000)        /*!< bit 31 */
+
+/******************  Bit definition for NVIC_PRI0 register  *******************/
+#define  NVIC_IPR0_PRI_0                     ((uint32_t)0x000000FF)        /*!< Priority of interrupt 0 */
+#define  NVIC_IPR0_PRI_1                     ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 1 */
+#define  NVIC_IPR0_PRI_2                     ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 2 */
+#define  NVIC_IPR0_PRI_3                     ((uint32_t)0xFF000000)        /*!< Priority of interrupt 3 */
+
+/******************  Bit definition for NVIC_PRI1 register  *******************/
+#define  NVIC_IPR1_PRI_4                     ((uint32_t)0x000000FF)        /*!< Priority of interrupt 4 */
+#define  NVIC_IPR1_PRI_5                     ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 5 */
+#define  NVIC_IPR1_PRI_6                     ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 6 */
+#define  NVIC_IPR1_PRI_7                     ((uint32_t)0xFF000000)        /*!< Priority of interrupt 7 */
+
+/******************  Bit definition for NVIC_PRI2 register  *******************/
+#define  NVIC_IPR2_PRI_8                     ((uint32_t)0x000000FF)        /*!< Priority of interrupt 8 */
+#define  NVIC_IPR2_PRI_9                     ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 9 */
+#define  NVIC_IPR2_PRI_10                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 10 */
+#define  NVIC_IPR2_PRI_11                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 11 */
+
+/******************  Bit definition for NVIC_PRI3 register  *******************/
+#define  NVIC_IPR3_PRI_12                    ((uint32_t)0x000000FF)        /*!< Priority of interrupt 12 */
+#define  NVIC_IPR3_PRI_13                    ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 13 */
+#define  NVIC_IPR3_PRI_14                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 14 */
+#define  NVIC_IPR3_PRI_15                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 15 */
+
+/******************  Bit definition for NVIC_PRI4 register  *******************/
+#define  NVIC_IPR4_PRI_16                    ((uint32_t)0x000000FF)        /*!< Priority of interrupt 16 */
+#define  NVIC_IPR4_PRI_17                    ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 17 */
+#define  NVIC_IPR4_PRI_18                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 18 */
+#define  NVIC_IPR4_PRI_19                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 19 */
+
+/******************  Bit definition for NVIC_PRI5 register  *******************/
+#define  NVIC_IPR5_PRI_20                    ((uint32_t)0x000000FF)        /*!< Priority of interrupt 20 */
+#define  NVIC_IPR5_PRI_21                    ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 21 */
+#define  NVIC_IPR5_PRI_22                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 22 */
+#define  NVIC_IPR5_PRI_23                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 23 */
+
+/******************  Bit definition for NVIC_PRI6 register  *******************/
+#define  NVIC_IPR6_PRI_24                    ((uint32_t)0x000000FF)        /*!< Priority of interrupt 24 */
+#define  NVIC_IPR6_PRI_25                    ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 25 */
+#define  NVIC_IPR6_PRI_26                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 26 */
+#define  NVIC_IPR6_PRI_27                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 27 */
+
+/******************  Bit definition for NVIC_PRI7 register  *******************/
+#define  NVIC_IPR7_PRI_28                    ((uint32_t)0x000000FF)        /*!< Priority of interrupt 28 */
+#define  NVIC_IPR7_PRI_29                    ((uint32_t)0x0000FF00)        /*!< Priority of interrupt 29 */
+#define  NVIC_IPR7_PRI_30                    ((uint32_t)0x00FF0000)        /*!< Priority of interrupt 30 */
+#define  NVIC_IPR7_PRI_31                    ((uint32_t)0xFF000000)        /*!< Priority of interrupt 31 */
+
+/******************  Bit definition for SCB_CPUID register  *******************/
+#define  SCB_CPUID_REVISION                  ((uint32_t)0x0000000F)        /*!< Implementation defined revision number */
+#define  SCB_CPUID_PARTNO                    ((uint32_t)0x0000FFF0)        /*!< Number of processor within family */
+#define  SCB_CPUID_Constant                  ((uint32_t)0x000F0000)        /*!< Reads as 0x0F */
+#define  SCB_CPUID_VARIANT                   ((uint32_t)0x00F00000)        /*!< Implementation defined variant number */
+#define  SCB_CPUID_IMPLEMENTER               ((uint32_t)0xFF000000)        /*!< Implementer code. ARM is 0x41 */
+
+/*******************  Bit definition for SCB_ICSR register  *******************/
+#define  SCB_ICSR_VECTACTIVE                 ((uint32_t)0x000001FF)        /*!< Active ISR number field */
+#define  SCB_ICSR_RETTOBASE                  ((uint32_t)0x00000800)        /*!< All active exceptions minus the IPSR_current_exception yields the empty set */
+#define  SCB_ICSR_VECTPENDING                ((uint32_t)0x003FF000)        /*!< Pending ISR number field */
+#define  SCB_ICSR_ISRPENDING                 ((uint32_t)0x00400000)        /*!< Interrupt pending flag */
+#define  SCB_ICSR_ISRPREEMPT                 ((uint32_t)0x00800000)        /*!< It indicates that a pending interrupt becomes active in the next running cycle */
+#define  SCB_ICSR_PENDSTCLR                  ((uint32_t)0x02000000)        /*!< Clear pending SysTick bit */
+#define  SCB_ICSR_PENDSTSET                  ((uint32_t)0x04000000)        /*!< Set pending SysTick bit */
+#define  SCB_ICSR_PENDSVCLR                  ((uint32_t)0x08000000)        /*!< Clear pending pendSV bit */
+#define  SCB_ICSR_PENDSVSET                  ((uint32_t)0x10000000)        /*!< Set pending pendSV bit */
+#define  SCB_ICSR_NMIPENDSET                 ((uint32_t)0x80000000)        /*!< Set pending NMI bit */
+
+/*******************  Bit definition for SCB_VTOR register  *******************/
+#define  SCB_VTOR_TBLOFF                     ((uint32_t)0x1FFFFF80)        /*!< Vector table base offset field */
+#define  SCB_VTOR_TBLBASE                    ((uint32_t)0x20000000)        /*!< Table base in code(0) or RAM(1) */
+
+/*!<*****************  Bit definition for SCB_AIRCR register  *******************/
+#define  SCB_AIRCR_VECTRESET                 ((uint32_t)0x00000001)        /*!< System Reset bit */
+#define  SCB_AIRCR_VECTCLRACTIVE             ((uint32_t)0x00000002)        /*!< Clear active vector bit */
+#define  SCB_AIRCR_SYSRESETREQ               ((uint32_t)0x00000004)        /*!< Requests chip control logic to generate a reset */
+
+#define  SCB_AIRCR_PRIGROUP                  ((uint32_t)0x00000700)        /*!< PRIGROUP[2:0] bits (Priority group) */
+#define  SCB_AIRCR_PRIGROUP_0                ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  SCB_AIRCR_PRIGROUP_1                ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  SCB_AIRCR_PRIGROUP_2                ((uint32_t)0x00000400)        /*!< Bit 2  */
+
+/* prority group configuration */
+#define  SCB_AIRCR_PRIGROUP0                 ((uint32_t)0x00000000)        /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */
+#define  SCB_AIRCR_PRIGROUP1                 ((uint32_t)0x00000100)        /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP2                 ((uint32_t)0x00000200)        /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP3                 ((uint32_t)0x00000300)        /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP4                 ((uint32_t)0x00000400)        /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP5                 ((uint32_t)0x00000500)        /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP6                 ((uint32_t)0x00000600)        /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */
+#define  SCB_AIRCR_PRIGROUP7                 ((uint32_t)0x00000700)        /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */
+
+#define  SCB_AIRCR_ENDIANESS                 ((uint32_t)0x00008000)        /*!< Data endianness bit */
+#define  SCB_AIRCR_VECTKEY                   ((uint32_t)0xFFFF0000)        /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */
+
+/*******************  Bit definition for SCB_SCR register  ********************/
+#define  SCB_SCR_SLEEPONEXIT                 ((uint8_t)0x02)               /*!< Sleep on exit bit */
+#define  SCB_SCR_SLEEPDEEP                   ((uint8_t)0x04)               /*!< Sleep deep bit */
+#define  SCB_SCR_SEVONPEND                   ((uint8_t)0x10)               /*!< Wake up from WFE */
+
+/********************  Bit definition for SCB_CCR register  *******************/
+#define  SCB_CCR_NONBASETHRDENA              ((uint16_t)0x0001)            /*!< Thread mode can be entered from any level in Handler mode by controlled return value */
+#define  SCB_CCR_USERSETMPEND                ((uint16_t)0x0002)            /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */
+#define  SCB_CCR_UNALIGN_TRP                 ((uint16_t)0x0008)            /*!< Trap for unaligned access */
+#define  SCB_CCR_DIV_0_TRP                   ((uint16_t)0x0010)            /*!< Trap on Divide by 0 */
+#define  SCB_CCR_BFHFNMIGN                   ((uint16_t)0x0100)            /*!< Handlers running at priority -1 and -2 */
+#define  SCB_CCR_STKALIGN                    ((uint16_t)0x0200)            /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */
+
+/*******************  Bit definition for SCB_SHPR register ********************/
+#define  SCB_SHPR_PRI_N                      ((uint32_t)0x000000FF)        /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */
+#define  SCB_SHPR_PRI_N1                     ((uint32_t)0x0000FF00)        /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */
+#define  SCB_SHPR_PRI_N2                     ((uint32_t)0x00FF0000)        /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */
+#define  SCB_SHPR_PRI_N3                     ((uint32_t)0xFF000000)        /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */
+
+/******************  Bit definition for SCB_SHCSR register  *******************/
+#define  SCB_SHCSR_MEMFAULTACT               ((uint32_t)0x00000001)        /*!< MemManage is active */
+#define  SCB_SHCSR_BUSFAULTACT               ((uint32_t)0x00000002)        /*!< BusFault is active */
+#define  SCB_SHCSR_USGFAULTACT               ((uint32_t)0x00000008)        /*!< UsageFault is active */
+#define  SCB_SHCSR_SVCALLACT                 ((uint32_t)0x00000080)        /*!< SVCall is active */
+#define  SCB_SHCSR_MONITORACT                ((uint32_t)0x00000100)        /*!< Monitor is active */
+#define  SCB_SHCSR_PENDSVACT                 ((uint32_t)0x00000400)        /*!< PendSV is active */
+#define  SCB_SHCSR_SYSTICKACT                ((uint32_t)0x00000800)        /*!< SysTick is active */
+#define  SCB_SHCSR_USGFAULTPENDED            ((uint32_t)0x00001000)        /*!< Usage Fault is pended */
+#define  SCB_SHCSR_MEMFAULTPENDED            ((uint32_t)0x00002000)        /*!< MemManage is pended */
+#define  SCB_SHCSR_BUSFAULTPENDED            ((uint32_t)0x00004000)        /*!< Bus Fault is pended */
+#define  SCB_SHCSR_SVCALLPENDED              ((uint32_t)0x00008000)        /*!< SVCall is pended */
+#define  SCB_SHCSR_MEMFAULTENA               ((uint32_t)0x00010000)        /*!< MemManage enable */
+#define  SCB_SHCSR_BUSFAULTENA               ((uint32_t)0x00020000)        /*!< Bus Fault enable */
+#define  SCB_SHCSR_USGFAULTENA               ((uint32_t)0x00040000)        /*!< UsageFault enable */
+
+/*******************  Bit definition for SCB_CFSR register  *******************/
+/*!< MFSR */
+#define  SCB_CFSR_IACCVIOL                   ((uint32_t)0x00000001)        /*!< Instruction access violation */
+#define  SCB_CFSR_DACCVIOL                   ((uint32_t)0x00000002)        /*!< Data access violation */
+#define  SCB_CFSR_MUNSTKERR                  ((uint32_t)0x00000008)        /*!< Unstacking error */
+#define  SCB_CFSR_MSTKERR                    ((uint32_t)0x00000010)        /*!< Stacking error */
+#define  SCB_CFSR_MMARVALID                  ((uint32_t)0x00000080)        /*!< Memory Manage Address Register address valid flag */
+/*!< BFSR */
+#define  SCB_CFSR_IBUSERR                    ((uint32_t)0x00000100)        /*!< Instruction bus error flag */
+#define  SCB_CFSR_PRECISERR                  ((uint32_t)0x00000200)        /*!< Precise data bus error */
+#define  SCB_CFSR_IMPRECISERR                ((uint32_t)0x00000400)        /*!< Imprecise data bus error */
+#define  SCB_CFSR_UNSTKERR                   ((uint32_t)0x00000800)        /*!< Unstacking error */
+#define  SCB_CFSR_STKERR                     ((uint32_t)0x00001000)        /*!< Stacking error */
+#define  SCB_CFSR_BFARVALID                  ((uint32_t)0x00008000)        /*!< Bus Fault Address Register address valid flag */
+/*!< UFSR */
+#define  SCB_CFSR_UNDEFINSTR                 ((uint32_t)0x00010000)        /*!< The processor attempt to execute an undefined instruction */
+#define  SCB_CFSR_INVSTATE                   ((uint32_t)0x00020000)        /*!< Invalid combination of EPSR and instruction */
+#define  SCB_CFSR_INVPC                      ((uint32_t)0x00040000)        /*!< Attempt to load EXC_RETURN into pc illegally */
+#define  SCB_CFSR_NOCP                       ((uint32_t)0x00080000)        /*!< Attempt to use a coprocessor instruction */
+#define  SCB_CFSR_UNALIGNED                  ((uint32_t)0x01000000)        /*!< Fault occurs when there is an attempt to make an unaligned memory access */
+#define  SCB_CFSR_DIVBYZERO                  ((uint32_t)0x02000000)        /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */
+
+/*******************  Bit definition for SCB_HFSR register  *******************/
+#define  SCB_HFSR_VECTTBL                    ((uint32_t)0x00000002)        /*!< Fault occurs because of vector table read on exception processing */
+#define  SCB_HFSR_FORCED                     ((uint32_t)0x40000000)        /*!< Hard Fault activated when a configurable Fault was received and cannot activate */
+#define  SCB_HFSR_DEBUGEVT                   ((uint32_t)0x80000000)        /*!< Fault related to debug */
+
+/*******************  Bit definition for SCB_DFSR register  *******************/
+#define  SCB_DFSR_HALTED                     ((uint8_t)0x01)               /*!< Halt request flag */
+#define  SCB_DFSR_BKPT                       ((uint8_t)0x02)               /*!< BKPT flag */
+#define  SCB_DFSR_DWTTRAP                    ((uint8_t)0x04)               /*!< Data Watchpoint and Trace (DWT) flag */
+#define  SCB_DFSR_VCATCH                     ((uint8_t)0x08)               /*!< Vector catch flag */
+#define  SCB_DFSR_EXTERNAL                   ((uint8_t)0x10)               /*!< External debug request flag */
+
+/*******************  Bit definition for SCB_MMFAR register  ******************/
+#define  SCB_MMFAR_ADDRESS                   ((uint32_t)0xFFFFFFFF)        /*!< Mem Manage fault address field */
+
+/*******************  Bit definition for SCB_BFAR register  *******************/
+#define  SCB_BFAR_ADDRESS                    ((uint32_t)0xFFFFFFFF)        /*!< Bus fault address field */
+
+/*******************  Bit definition for SCB_afsr register  *******************/
+#define  SCB_AFSR_IMPDEF                     ((uint32_t)0xFFFFFFFF)        /*!< Implementation defined */
+
+/******************************************************************************/
+/*                                                                            */
+/*                    External Interrupt/Event Controller                     */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for EXTI_IMR register  *******************/
+#define  EXTI_IMR_MR0                        ((uint32_t)0x00000001)        /*!< Interrupt Mask on line 0 */
+#define  EXTI_IMR_MR1                        ((uint32_t)0x00000002)        /*!< Interrupt Mask on line 1 */
+#define  EXTI_IMR_MR2                        ((uint32_t)0x00000004)        /*!< Interrupt Mask on line 2 */
+#define  EXTI_IMR_MR3                        ((uint32_t)0x00000008)        /*!< Interrupt Mask on line 3 */
+#define  EXTI_IMR_MR4                        ((uint32_t)0x00000010)        /*!< Interrupt Mask on line 4 */
+#define  EXTI_IMR_MR5                        ((uint32_t)0x00000020)        /*!< Interrupt Mask on line 5 */
+#define  EXTI_IMR_MR6                        ((uint32_t)0x00000040)        /*!< Interrupt Mask on line 6 */
+#define  EXTI_IMR_MR7                        ((uint32_t)0x00000080)        /*!< Interrupt Mask on line 7 */
+#define  EXTI_IMR_MR8                        ((uint32_t)0x00000100)        /*!< Interrupt Mask on line 8 */
+#define  EXTI_IMR_MR9                        ((uint32_t)0x00000200)        /*!< Interrupt Mask on line 9 */
+#define  EXTI_IMR_MR10                       ((uint32_t)0x00000400)        /*!< Interrupt Mask on line 10 */
+#define  EXTI_IMR_MR11                       ((uint32_t)0x00000800)        /*!< Interrupt Mask on line 11 */
+#define  EXTI_IMR_MR12                       ((uint32_t)0x00001000)        /*!< Interrupt Mask on line 12 */
+#define  EXTI_IMR_MR13                       ((uint32_t)0x00002000)        /*!< Interrupt Mask on line 13 */
+#define  EXTI_IMR_MR14                       ((uint32_t)0x00004000)        /*!< Interrupt Mask on line 14 */
+#define  EXTI_IMR_MR15                       ((uint32_t)0x00008000)        /*!< Interrupt Mask on line 15 */
+#define  EXTI_IMR_MR16                       ((uint32_t)0x00010000)        /*!< Interrupt Mask on line 16 */
+#define  EXTI_IMR_MR17                       ((uint32_t)0x00020000)        /*!< Interrupt Mask on line 17 */
+#define  EXTI_IMR_MR18                       ((uint32_t)0x00040000)        /*!< Interrupt Mask on line 18 */
+#define  EXTI_IMR_MR19                       ((uint32_t)0x00080000)        /*!< Interrupt Mask on line 19 */
+
+/*******************  Bit definition for EXTI_EMR register  *******************/
+#define  EXTI_EMR_MR0                        ((uint32_t)0x00000001)        /*!< Event Mask on line 0 */
+#define  EXTI_EMR_MR1                        ((uint32_t)0x00000002)        /*!< Event Mask on line 1 */
+#define  EXTI_EMR_MR2                        ((uint32_t)0x00000004)        /*!< Event Mask on line 2 */
+#define  EXTI_EMR_MR3                        ((uint32_t)0x00000008)        /*!< Event Mask on line 3 */
+#define  EXTI_EMR_MR4                        ((uint32_t)0x00000010)        /*!< Event Mask on line 4 */
+#define  EXTI_EMR_MR5                        ((uint32_t)0x00000020)        /*!< Event Mask on line 5 */
+#define  EXTI_EMR_MR6                        ((uint32_t)0x00000040)        /*!< Event Mask on line 6 */
+#define  EXTI_EMR_MR7                        ((uint32_t)0x00000080)        /*!< Event Mask on line 7 */
+#define  EXTI_EMR_MR8                        ((uint32_t)0x00000100)        /*!< Event Mask on line 8 */
+#define  EXTI_EMR_MR9                        ((uint32_t)0x00000200)        /*!< Event Mask on line 9 */
+#define  EXTI_EMR_MR10                       ((uint32_t)0x00000400)        /*!< Event Mask on line 10 */
+#define  EXTI_EMR_MR11                       ((uint32_t)0x00000800)        /*!< Event Mask on line 11 */
+#define  EXTI_EMR_MR12                       ((uint32_t)0x00001000)        /*!< Event Mask on line 12 */
+#define  EXTI_EMR_MR13                       ((uint32_t)0x00002000)        /*!< Event Mask on line 13 */
+#define  EXTI_EMR_MR14                       ((uint32_t)0x00004000)        /*!< Event Mask on line 14 */
+#define  EXTI_EMR_MR15                       ((uint32_t)0x00008000)        /*!< Event Mask on line 15 */
+#define  EXTI_EMR_MR16                       ((uint32_t)0x00010000)        /*!< Event Mask on line 16 */
+#define  EXTI_EMR_MR17                       ((uint32_t)0x00020000)        /*!< Event Mask on line 17 */
+#define  EXTI_EMR_MR18                       ((uint32_t)0x00040000)        /*!< Event Mask on line 18 */
+#define  EXTI_EMR_MR19                       ((uint32_t)0x00080000)        /*!< Event Mask on line 19 */
+
+/******************  Bit definition for EXTI_RTSR register  *******************/
+#define  EXTI_RTSR_TR0                       ((uint32_t)0x00000001)        /*!< Rising trigger event configuration bit of line 0 */
+#define  EXTI_RTSR_TR1                       ((uint32_t)0x00000002)        /*!< Rising trigger event configuration bit of line 1 */
+#define  EXTI_RTSR_TR2                       ((uint32_t)0x00000004)        /*!< Rising trigger event configuration bit of line 2 */
+#define  EXTI_RTSR_TR3                       ((uint32_t)0x00000008)        /*!< Rising trigger event configuration bit of line 3 */
+#define  EXTI_RTSR_TR4                       ((uint32_t)0x00000010)        /*!< Rising trigger event configuration bit of line 4 */
+#define  EXTI_RTSR_TR5                       ((uint32_t)0x00000020)        /*!< Rising trigger event configuration bit of line 5 */
+#define  EXTI_RTSR_TR6                       ((uint32_t)0x00000040)        /*!< Rising trigger event configuration bit of line 6 */
+#define  EXTI_RTSR_TR7                       ((uint32_t)0x00000080)        /*!< Rising trigger event configuration bit of line 7 */
+#define  EXTI_RTSR_TR8                       ((uint32_t)0x00000100)        /*!< Rising trigger event configuration bit of line 8 */
+#define  EXTI_RTSR_TR9                       ((uint32_t)0x00000200)        /*!< Rising trigger event configuration bit of line 9 */
+#define  EXTI_RTSR_TR10                      ((uint32_t)0x00000400)        /*!< Rising trigger event configuration bit of line 10 */
+#define  EXTI_RTSR_TR11                      ((uint32_t)0x00000800)        /*!< Rising trigger event configuration bit of line 11 */
+#define  EXTI_RTSR_TR12                      ((uint32_t)0x00001000)        /*!< Rising trigger event configuration bit of line 12 */
+#define  EXTI_RTSR_TR13                      ((uint32_t)0x00002000)        /*!< Rising trigger event configuration bit of line 13 */
+#define  EXTI_RTSR_TR14                      ((uint32_t)0x00004000)        /*!< Rising trigger event configuration bit of line 14 */
+#define  EXTI_RTSR_TR15                      ((uint32_t)0x00008000)        /*!< Rising trigger event configuration bit of line 15 */
+#define  EXTI_RTSR_TR16                      ((uint32_t)0x00010000)        /*!< Rising trigger event configuration bit of line 16 */
+#define  EXTI_RTSR_TR17                      ((uint32_t)0x00020000)        /*!< Rising trigger event configuration bit of line 17 */
+#define  EXTI_RTSR_TR18                      ((uint32_t)0x00040000)        /*!< Rising trigger event configuration bit of line 18 */
+#define  EXTI_RTSR_TR19                      ((uint32_t)0x00080000)        /*!< Rising trigger event configuration bit of line 19 */
+
+/******************  Bit definition for EXTI_FTSR register  *******************/
+#define  EXTI_FTSR_TR0                       ((uint32_t)0x00000001)        /*!< Falling trigger event configuration bit of line 0 */
+#define  EXTI_FTSR_TR1                       ((uint32_t)0x00000002)        /*!< Falling trigger event configuration bit of line 1 */
+#define  EXTI_FTSR_TR2                       ((uint32_t)0x00000004)        /*!< Falling trigger event configuration bit of line 2 */
+#define  EXTI_FTSR_TR3                       ((uint32_t)0x00000008)        /*!< Falling trigger event configuration bit of line 3 */
+#define  EXTI_FTSR_TR4                       ((uint32_t)0x00000010)        /*!< Falling trigger event configuration bit of line 4 */
+#define  EXTI_FTSR_TR5                       ((uint32_t)0x00000020)        /*!< Falling trigger event configuration bit of line 5 */
+#define  EXTI_FTSR_TR6                       ((uint32_t)0x00000040)        /*!< Falling trigger event configuration bit of line 6 */
+#define  EXTI_FTSR_TR7                       ((uint32_t)0x00000080)        /*!< Falling trigger event configuration bit of line 7 */
+#define  EXTI_FTSR_TR8                       ((uint32_t)0x00000100)        /*!< Falling trigger event configuration bit of line 8 */
+#define  EXTI_FTSR_TR9                       ((uint32_t)0x00000200)        /*!< Falling trigger event configuration bit of line 9 */
+#define  EXTI_FTSR_TR10                      ((uint32_t)0x00000400)        /*!< Falling trigger event configuration bit of line 10 */
+#define  EXTI_FTSR_TR11                      ((uint32_t)0x00000800)        /*!< Falling trigger event configuration bit of line 11 */
+#define  EXTI_FTSR_TR12                      ((uint32_t)0x00001000)        /*!< Falling trigger event configuration bit of line 12 */
+#define  EXTI_FTSR_TR13                      ((uint32_t)0x00002000)        /*!< Falling trigger event configuration bit of line 13 */
+#define  EXTI_FTSR_TR14                      ((uint32_t)0x00004000)        /*!< Falling trigger event configuration bit of line 14 */
+#define  EXTI_FTSR_TR15                      ((uint32_t)0x00008000)        /*!< Falling trigger event configuration bit of line 15 */
+#define  EXTI_FTSR_TR16                      ((uint32_t)0x00010000)        /*!< Falling trigger event configuration bit of line 16 */
+#define  EXTI_FTSR_TR17                      ((uint32_t)0x00020000)        /*!< Falling trigger event configuration bit of line 17 */
+#define  EXTI_FTSR_TR18                      ((uint32_t)0x00040000)        /*!< Falling trigger event configuration bit of line 18 */
+#define  EXTI_FTSR_TR19                      ((uint32_t)0x00080000)        /*!< Falling trigger event configuration bit of line 19 */
+
+/******************  Bit definition for EXTI_SWIER register  ******************/
+#define  EXTI_SWIER_SWIER0                   ((uint32_t)0x00000001)        /*!< Software Interrupt on line 0 */
+#define  EXTI_SWIER_SWIER1                   ((uint32_t)0x00000002)        /*!< Software Interrupt on line 1 */
+#define  EXTI_SWIER_SWIER2                   ((uint32_t)0x00000004)        /*!< Software Interrupt on line 2 */
+#define  EXTI_SWIER_SWIER3                   ((uint32_t)0x00000008)        /*!< Software Interrupt on line 3 */
+#define  EXTI_SWIER_SWIER4                   ((uint32_t)0x00000010)        /*!< Software Interrupt on line 4 */
+#define  EXTI_SWIER_SWIER5                   ((uint32_t)0x00000020)        /*!< Software Interrupt on line 5 */
+#define  EXTI_SWIER_SWIER6                   ((uint32_t)0x00000040)        /*!< Software Interrupt on line 6 */
+#define  EXTI_SWIER_SWIER7                   ((uint32_t)0x00000080)        /*!< Software Interrupt on line 7 */
+#define  EXTI_SWIER_SWIER8                   ((uint32_t)0x00000100)        /*!< Software Interrupt on line 8 */
+#define  EXTI_SWIER_SWIER9                   ((uint32_t)0x00000200)        /*!< Software Interrupt on line 9 */
+#define  EXTI_SWIER_SWIER10                  ((uint32_t)0x00000400)        /*!< Software Interrupt on line 10 */
+#define  EXTI_SWIER_SWIER11                  ((uint32_t)0x00000800)        /*!< Software Interrupt on line 11 */
+#define  EXTI_SWIER_SWIER12                  ((uint32_t)0x00001000)        /*!< Software Interrupt on line 12 */
+#define  EXTI_SWIER_SWIER13                  ((uint32_t)0x00002000)        /*!< Software Interrupt on line 13 */
+#define  EXTI_SWIER_SWIER14                  ((uint32_t)0x00004000)        /*!< Software Interrupt on line 14 */
+#define  EXTI_SWIER_SWIER15                  ((uint32_t)0x00008000)        /*!< Software Interrupt on line 15 */
+#define  EXTI_SWIER_SWIER16                  ((uint32_t)0x00010000)        /*!< Software Interrupt on line 16 */
+#define  EXTI_SWIER_SWIER17                  ((uint32_t)0x00020000)        /*!< Software Interrupt on line 17 */
+#define  EXTI_SWIER_SWIER18                  ((uint32_t)0x00040000)        /*!< Software Interrupt on line 18 */
+#define  EXTI_SWIER_SWIER19                  ((uint32_t)0x00080000)        /*!< Software Interrupt on line 19 */
+
+/*******************  Bit definition for EXTI_PR register  ********************/
+#define  EXTI_PR_PR0                         ((uint32_t)0x00000001)        /*!< Pending bit for line 0 */
+#define  EXTI_PR_PR1                         ((uint32_t)0x00000002)        /*!< Pending bit for line 1 */
+#define  EXTI_PR_PR2                         ((uint32_t)0x00000004)        /*!< Pending bit for line 2 */
+#define  EXTI_PR_PR3                         ((uint32_t)0x00000008)        /*!< Pending bit for line 3 */
+#define  EXTI_PR_PR4                         ((uint32_t)0x00000010)        /*!< Pending bit for line 4 */
+#define  EXTI_PR_PR5                         ((uint32_t)0x00000020)        /*!< Pending bit for line 5 */
+#define  EXTI_PR_PR6                         ((uint32_t)0x00000040)        /*!< Pending bit for line 6 */
+#define  EXTI_PR_PR7                         ((uint32_t)0x00000080)        /*!< Pending bit for line 7 */
+#define  EXTI_PR_PR8                         ((uint32_t)0x00000100)        /*!< Pending bit for line 8 */
+#define  EXTI_PR_PR9                         ((uint32_t)0x00000200)        /*!< Pending bit for line 9 */
+#define  EXTI_PR_PR10                        ((uint32_t)0x00000400)        /*!< Pending bit for line 10 */
+#define  EXTI_PR_PR11                        ((uint32_t)0x00000800)        /*!< Pending bit for line 11 */
+#define  EXTI_PR_PR12                        ((uint32_t)0x00001000)        /*!< Pending bit for line 12 */
+#define  EXTI_PR_PR13                        ((uint32_t)0x00002000)        /*!< Pending bit for line 13 */
+#define  EXTI_PR_PR14                        ((uint32_t)0x00004000)        /*!< Pending bit for line 14 */
+#define  EXTI_PR_PR15                        ((uint32_t)0x00008000)        /*!< Pending bit for line 15 */
+#define  EXTI_PR_PR16                        ((uint32_t)0x00010000)        /*!< Pending bit for line 16 */
+#define  EXTI_PR_PR17                        ((uint32_t)0x00020000)        /*!< Pending bit for line 17 */
+#define  EXTI_PR_PR18                        ((uint32_t)0x00040000)        /*!< Pending bit for line 18 */
+#define  EXTI_PR_PR19                        ((uint32_t)0x00080000)        /*!< Pending bit for line 19 */
+
+/******************************************************************************/
+/*                                                                            */
+/*                             DMA Controller                                 */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for DMA_ISR register  ********************/
+#define  DMA_ISR_GIF1                        ((uint32_t)0x00000001)        /*!< Channel 1 Global interrupt flag */
+#define  DMA_ISR_TCIF1                       ((uint32_t)0x00000002)        /*!< Channel 1 Transfer Complete flag */
+#define  DMA_ISR_HTIF1                       ((uint32_t)0x00000004)        /*!< Channel 1 Half Transfer flag */
+#define  DMA_ISR_TEIF1                       ((uint32_t)0x00000008)        /*!< Channel 1 Transfer Error flag */
+#define  DMA_ISR_GIF2                        ((uint32_t)0x00000010)        /*!< Channel 2 Global interrupt flag */
+#define  DMA_ISR_TCIF2                       ((uint32_t)0x00000020)        /*!< Channel 2 Transfer Complete flag */
+#define  DMA_ISR_HTIF2                       ((uint32_t)0x00000040)        /*!< Channel 2 Half Transfer flag */
+#define  DMA_ISR_TEIF2                       ((uint32_t)0x00000080)        /*!< Channel 2 Transfer Error flag */
+#define  DMA_ISR_GIF3                        ((uint32_t)0x00000100)        /*!< Channel 3 Global interrupt flag */
+#define  DMA_ISR_TCIF3                       ((uint32_t)0x00000200)        /*!< Channel 3 Transfer Complete flag */
+#define  DMA_ISR_HTIF3                       ((uint32_t)0x00000400)        /*!< Channel 3 Half Transfer flag */
+#define  DMA_ISR_TEIF3                       ((uint32_t)0x00000800)        /*!< Channel 3 Transfer Error flag */
+#define  DMA_ISR_GIF4                        ((uint32_t)0x00001000)        /*!< Channel 4 Global interrupt flag */
+#define  DMA_ISR_TCIF4                       ((uint32_t)0x00002000)        /*!< Channel 4 Transfer Complete flag */
+#define  DMA_ISR_HTIF4                       ((uint32_t)0x00004000)        /*!< Channel 4 Half Transfer flag */
+#define  DMA_ISR_TEIF4                       ((uint32_t)0x00008000)        /*!< Channel 4 Transfer Error flag */
+#define  DMA_ISR_GIF5                        ((uint32_t)0x00010000)        /*!< Channel 5 Global interrupt flag */
+#define  DMA_ISR_TCIF5                       ((uint32_t)0x00020000)        /*!< Channel 5 Transfer Complete flag */
+#define  DMA_ISR_HTIF5                       ((uint32_t)0x00040000)        /*!< Channel 5 Half Transfer flag */
+#define  DMA_ISR_TEIF5                       ((uint32_t)0x00080000)        /*!< Channel 5 Transfer Error flag */
+#define  DMA_ISR_GIF6                        ((uint32_t)0x00100000)        /*!< Channel 6 Global interrupt flag */
+#define  DMA_ISR_TCIF6                       ((uint32_t)0x00200000)        /*!< Channel 6 Transfer Complete flag */
+#define  DMA_ISR_HTIF6                       ((uint32_t)0x00400000)        /*!< Channel 6 Half Transfer flag */
+#define  DMA_ISR_TEIF6                       ((uint32_t)0x00800000)        /*!< Channel 6 Transfer Error flag */
+#define  DMA_ISR_GIF7                        ((uint32_t)0x01000000)        /*!< Channel 7 Global interrupt flag */
+#define  DMA_ISR_TCIF7                       ((uint32_t)0x02000000)        /*!< Channel 7 Transfer Complete flag */
+#define  DMA_ISR_HTIF7                       ((uint32_t)0x04000000)        /*!< Channel 7 Half Transfer flag */
+#define  DMA_ISR_TEIF7                       ((uint32_t)0x08000000)        /*!< Channel 7 Transfer Error flag */
+
+/*******************  Bit definition for DMA_IFCR register  *******************/
+#define  DMA_IFCR_CGIF1                      ((uint32_t)0x00000001)        /*!< Channel 1 Global interrupt clear */
+#define  DMA_IFCR_CTCIF1                     ((uint32_t)0x00000002)        /*!< Channel 1 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF1                     ((uint32_t)0x00000004)        /*!< Channel 1 Half Transfer clear */
+#define  DMA_IFCR_CTEIF1                     ((uint32_t)0x00000008)        /*!< Channel 1 Transfer Error clear */
+#define  DMA_IFCR_CGIF2                      ((uint32_t)0x00000010)        /*!< Channel 2 Global interrupt clear */
+#define  DMA_IFCR_CTCIF2                     ((uint32_t)0x00000020)        /*!< Channel 2 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF2                     ((uint32_t)0x00000040)        /*!< Channel 2 Half Transfer clear */
+#define  DMA_IFCR_CTEIF2                     ((uint32_t)0x00000080)        /*!< Channel 2 Transfer Error clear */
+#define  DMA_IFCR_CGIF3                      ((uint32_t)0x00000100)        /*!< Channel 3 Global interrupt clear */
+#define  DMA_IFCR_CTCIF3                     ((uint32_t)0x00000200)        /*!< Channel 3 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF3                     ((uint32_t)0x00000400)        /*!< Channel 3 Half Transfer clear */
+#define  DMA_IFCR_CTEIF3                     ((uint32_t)0x00000800)        /*!< Channel 3 Transfer Error clear */
+#define  DMA_IFCR_CGIF4                      ((uint32_t)0x00001000)        /*!< Channel 4 Global interrupt clear */
+#define  DMA_IFCR_CTCIF4                     ((uint32_t)0x00002000)        /*!< Channel 4 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF4                     ((uint32_t)0x00004000)        /*!< Channel 4 Half Transfer clear */
+#define  DMA_IFCR_CTEIF4                     ((uint32_t)0x00008000)        /*!< Channel 4 Transfer Error clear */
+#define  DMA_IFCR_CGIF5                      ((uint32_t)0x00010000)        /*!< Channel 5 Global interrupt clear */
+#define  DMA_IFCR_CTCIF5                     ((uint32_t)0x00020000)        /*!< Channel 5 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF5                     ((uint32_t)0x00040000)        /*!< Channel 5 Half Transfer clear */
+#define  DMA_IFCR_CTEIF5                     ((uint32_t)0x00080000)        /*!< Channel 5 Transfer Error clear */
+#define  DMA_IFCR_CGIF6                      ((uint32_t)0x00100000)        /*!< Channel 6 Global interrupt clear */
+#define  DMA_IFCR_CTCIF6                     ((uint32_t)0x00200000)        /*!< Channel 6 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF6                     ((uint32_t)0x00400000)        /*!< Channel 6 Half Transfer clear */
+#define  DMA_IFCR_CTEIF6                     ((uint32_t)0x00800000)        /*!< Channel 6 Transfer Error clear */
+#define  DMA_IFCR_CGIF7                      ((uint32_t)0x01000000)        /*!< Channel 7 Global interrupt clear */
+#define  DMA_IFCR_CTCIF7                     ((uint32_t)0x02000000)        /*!< Channel 7 Transfer Complete clear */
+#define  DMA_IFCR_CHTIF7                     ((uint32_t)0x04000000)        /*!< Channel 7 Half Transfer clear */
+#define  DMA_IFCR_CTEIF7                     ((uint32_t)0x08000000)        /*!< Channel 7 Transfer Error clear */
+
+/*******************  Bit definition for DMA_CCR1 register  *******************/
+#define  DMA_CCR1_EN                         ((uint16_t)0x0001)            /*!< Channel enable*/
+#define  DMA_CCR1_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR1_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR1_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR1_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR1_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR1_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR1_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR1_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR1_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR1_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR1_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR1_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR1_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR1_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits(Channel Priority level) */
+#define  DMA_CCR1_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR1_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR1_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode */
+
+/*******************  Bit definition for DMA_CCR2 register  *******************/
+#define  DMA_CCR2_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR2_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR2_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR2_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR2_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR2_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR2_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR2_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR2_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR2_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR2_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR2_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR2_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR2_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR2_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR2_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR2_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR2_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode */
+
+/*******************  Bit definition for DMA_CCR3 register  *******************/
+#define  DMA_CCR3_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR3_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR3_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR3_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR3_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR3_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR3_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR3_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR3_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR3_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR3_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR3_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR3_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR3_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR3_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR3_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR3_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR3_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode */
+
+/*!<******************  Bit definition for DMA_CCR4 register  *******************/
+#define  DMA_CCR4_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR4_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR4_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR4_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR4_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR4_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR4_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR4_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR4_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR4_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR4_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR4_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR4_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR4_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR4_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR4_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR4_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR4_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode */
+
+/******************  Bit definition for DMA_CCR5 register  *******************/
+#define  DMA_CCR5_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR5_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR5_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR5_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR5_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR5_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR5_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR5_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR5_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR5_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR5_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR5_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR5_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR5_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR5_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR5_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR5_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR5_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode enable */
+
+/*******************  Bit definition for DMA_CCR6 register  *******************/
+#define  DMA_CCR6_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR6_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR6_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR6_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR6_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR6_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR6_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR6_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR6_PSIZE                      ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR6_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR6_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR6_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR6_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR6_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR6_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR6_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR6_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR6_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode */
+
+/*******************  Bit definition for DMA_CCR7 register  *******************/
+#define  DMA_CCR7_EN                         ((uint16_t)0x0001)            /*!< Channel enable */
+#define  DMA_CCR7_TCIE                       ((uint16_t)0x0002)            /*!< Transfer complete interrupt enable */
+#define  DMA_CCR7_HTIE                       ((uint16_t)0x0004)            /*!< Half Transfer interrupt enable */
+#define  DMA_CCR7_TEIE                       ((uint16_t)0x0008)            /*!< Transfer error interrupt enable */
+#define  DMA_CCR7_DIR                        ((uint16_t)0x0010)            /*!< Data transfer direction */
+#define  DMA_CCR7_CIRC                       ((uint16_t)0x0020)            /*!< Circular mode */
+#define  DMA_CCR7_PINC                       ((uint16_t)0x0040)            /*!< Peripheral increment mode */
+#define  DMA_CCR7_MINC                       ((uint16_t)0x0080)            /*!< Memory increment mode */
+
+#define  DMA_CCR7_PSIZE            ,         ((uint16_t)0x0300)            /*!< PSIZE[1:0] bits (Peripheral size) */
+#define  DMA_CCR7_PSIZE_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  DMA_CCR7_PSIZE_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  DMA_CCR7_MSIZE                      ((uint16_t)0x0C00)            /*!< MSIZE[1:0] bits (Memory size) */
+#define  DMA_CCR7_MSIZE_0                    ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  DMA_CCR7_MSIZE_1                    ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  DMA_CCR7_PL                         ((uint16_t)0x3000)            /*!< PL[1:0] bits (Channel Priority level) */
+#define  DMA_CCR7_PL_0                       ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  DMA_CCR7_PL_1                       ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  DMA_CCR7_MEM2MEM                    ((uint16_t)0x4000)            /*!< Memory to memory mode enable */
+
+/******************  Bit definition for DMA_CNDTR1 register  ******************/
+#define  DMA_CNDTR1_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR2 register  ******************/
+#define  DMA_CNDTR2_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR3 register  ******************/
+#define  DMA_CNDTR3_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR4 register  ******************/
+#define  DMA_CNDTR4_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR5 register  ******************/
+#define  DMA_CNDTR5_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR6 register  ******************/
+#define  DMA_CNDTR6_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CNDTR7 register  ******************/
+#define  DMA_CNDTR7_NDT                      ((uint16_t)0xFFFF)            /*!< Number of data to Transfer */
+
+/******************  Bit definition for DMA_CPAR1 register  *******************/
+#define  DMA_CPAR1_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+/******************  Bit definition for DMA_CPAR2 register  *******************/
+#define  DMA_CPAR2_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+/******************  Bit definition for DMA_CPAR3 register  *******************/
+#define  DMA_CPAR3_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+
+/******************  Bit definition for DMA_CPAR4 register  *******************/
+#define  DMA_CPAR4_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+/******************  Bit definition for DMA_CPAR5 register  *******************/
+#define  DMA_CPAR5_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+/******************  Bit definition for DMA_CPAR6 register  *******************/
+#define  DMA_CPAR6_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+
+/******************  Bit definition for DMA_CPAR7 register  *******************/
+#define  DMA_CPAR7_PA                        ((uint32_t)0xFFFFFFFF)        /*!< Peripheral Address */
+
+/******************  Bit definition for DMA_CMAR1 register  *******************/
+#define  DMA_CMAR1_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************  Bit definition for DMA_CMAR2 register  *******************/
+#define  DMA_CMAR2_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************  Bit definition for DMA_CMAR3 register  *******************/
+#define  DMA_CMAR3_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+
+/******************  Bit definition for DMA_CMAR4 register  *******************/
+#define  DMA_CMAR4_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************  Bit definition for DMA_CMAR5 register  *******************/
+#define  DMA_CMAR5_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************  Bit definition for DMA_CMAR6 register  *******************/
+#define  DMA_CMAR6_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************  Bit definition for DMA_CMAR7 register  *******************/
+#define  DMA_CMAR7_MA                        ((uint32_t)0xFFFFFFFF)        /*!< Memory Address */
+
+/******************************************************************************/
+/*                                                                            */
+/*                        Analog to Digital Converter                         */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for ADC_SR register  ********************/
+#define  ADC_SR_AWD                          ((uint8_t)0x01)               /*!< Analog watchdog flag */
+#define  ADC_SR_EOC                          ((uint8_t)0x02)               /*!< End of conversion */
+#define  ADC_SR_JEOC                         ((uint8_t)0x04)               /*!< Injected channel end of conversion */
+#define  ADC_SR_JSTRT                        ((uint8_t)0x08)               /*!< Injected channel Start flag */
+#define  ADC_SR_STRT                         ((uint8_t)0x10)               /*!< Regular channel Start flag */
+
+/*******************  Bit definition for ADC_CR1 register  ********************/
+#define  ADC_CR1_AWDCH                       ((uint32_t)0x0000001F)        /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define  ADC_CR1_AWDCH_0                     ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_CR1_AWDCH_1                     ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_CR1_AWDCH_2                     ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  ADC_CR1_AWDCH_3                     ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  ADC_CR1_AWDCH_4                     ((uint32_t)0x00000010)        /*!< Bit 4 */
+
+#define  ADC_CR1_EOCIE                       ((uint32_t)0x00000020)        /*!< Interrupt enable for EOC */
+#define  ADC_CR1_AWDIE                       ((uint32_t)0x00000040)        /*!< Analog Watchdog interrupt enable */
+#define  ADC_CR1_JEOCIE                      ((uint32_t)0x00000080)        /*!< Interrupt enable for injected channels */
+#define  ADC_CR1_SCAN                        ((uint32_t)0x00000100)        /*!< Scan mode */
+#define  ADC_CR1_AWDSGL                      ((uint32_t)0x00000200)        /*!< Enable the watchdog on a single channel in scan mode */
+#define  ADC_CR1_JAUTO                       ((uint32_t)0x00000400)        /*!< Automatic injected group conversion */
+#define  ADC_CR1_DISCEN                      ((uint32_t)0x00000800)        /*!< Discontinuous mode on regular channels */
+#define  ADC_CR1_JDISCEN                     ((uint32_t)0x00001000)        /*!< Discontinuous mode on injected channels */
+
+#define  ADC_CR1_DISCNUM                     ((uint32_t)0x0000E000)        /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define  ADC_CR1_DISCNUM_0                   ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define  ADC_CR1_DISCNUM_1                   ((uint32_t)0x00004000)        /*!< Bit 1 */
+#define  ADC_CR1_DISCNUM_2                   ((uint32_t)0x00008000)        /*!< Bit 2 */
+
+#define  ADC_CR1_DUALMOD                     ((uint32_t)0x000F0000)        /*!< DUALMOD[3:0] bits (Dual mode selection) */
+#define  ADC_CR1_DUALMOD_0                   ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  ADC_CR1_DUALMOD_1                   ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  ADC_CR1_DUALMOD_2                   ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  ADC_CR1_DUALMOD_3                   ((uint32_t)0x00080000)        /*!< Bit 3 */
+
+#define  ADC_CR1_JAWDEN                      ((uint32_t)0x00400000)        /*!< Analog watchdog enable on injected channels */
+#define  ADC_CR1_AWDEN                       ((uint32_t)0x00800000)        /*!< Analog watchdog enable on regular channels */
+
+  
+/*******************  Bit definition for ADC_CR2 register  ********************/
+#define  ADC_CR2_ADON                        ((uint32_t)0x00000001)        /*!< A/D Converter ON / OFF */
+#define  ADC_CR2_CONT                        ((uint32_t)0x00000002)        /*!< Continuous Conversion */
+#define  ADC_CR2_CAL                         ((uint32_t)0x00000004)        /*!< A/D Calibration */
+#define  ADC_CR2_RSTCAL                      ((uint32_t)0x00000008)        /*!< Reset Calibration */
+#define  ADC_CR2_DMA                         ((uint32_t)0x00000100)        /*!< Direct Memory access mode */
+#define  ADC_CR2_ALIGN                       ((uint32_t)0x00000800)        /*!< Data Alignment */
+
+#define  ADC_CR2_JEXTSEL                     ((uint32_t)0x00007000)        /*!< JEXTSEL[2:0] bits (External event select for injected group) */
+#define  ADC_CR2_JEXTSEL_0                   ((uint32_t)0x00001000)        /*!< Bit 0 */
+#define  ADC_CR2_JEXTSEL_1                   ((uint32_t)0x00002000)        /*!< Bit 1 */
+#define  ADC_CR2_JEXTSEL_2                   ((uint32_t)0x00004000)        /*!< Bit 2 */
+
+#define  ADC_CR2_JEXTTRIG                    ((uint32_t)0x00008000)        /*!< External Trigger Conversion mode for injected channels */
+
+#define  ADC_CR2_EXTSEL                      ((uint32_t)0x000E0000)        /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define  ADC_CR2_EXTSEL_0                    ((uint32_t)0x00020000)        /*!< Bit 0 */
+#define  ADC_CR2_EXTSEL_1                    ((uint32_t)0x00040000)        /*!< Bit 1 */
+#define  ADC_CR2_EXTSEL_2                    ((uint32_t)0x00080000)        /*!< Bit 2 */
+
+#define  ADC_CR2_EXTTRIG                     ((uint32_t)0x00100000)        /*!< External Trigger Conversion mode for regular channels */
+#define  ADC_CR2_JSWSTART                    ((uint32_t)0x00200000)        /*!< Start Conversion of injected channels */
+#define  ADC_CR2_SWSTART                     ((uint32_t)0x00400000)        /*!< Start Conversion of regular channels */
+#define  ADC_CR2_TSVREFE                     ((uint32_t)0x00800000)        /*!< Temperature Sensor and VREFINT Enable */
+
+/******************  Bit definition for ADC_SMPR1 register  *******************/
+#define  ADC_SMPR1_SMP10                     ((uint32_t)0x00000007)        /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define  ADC_SMPR1_SMP10_0                   ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP10_1                   ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP10_2                   ((uint32_t)0x00000004)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP11                     ((uint32_t)0x00000038)        /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define  ADC_SMPR1_SMP11_0                   ((uint32_t)0x00000008)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP11_1                   ((uint32_t)0x00000010)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP11_2                   ((uint32_t)0x00000020)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP12                     ((uint32_t)0x000001C0)        /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define  ADC_SMPR1_SMP12_0                   ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP12_1                   ((uint32_t)0x00000080)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP12_2                   ((uint32_t)0x00000100)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP13                     ((uint32_t)0x00000E00)        /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define  ADC_SMPR1_SMP13_0                   ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP13_1                   ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP13_2                   ((uint32_t)0x00000800)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP14                     ((uint32_t)0x00007000)        /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define  ADC_SMPR1_SMP14_0                   ((uint32_t)0x00001000)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP14_1                   ((uint32_t)0x00002000)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP14_2                   ((uint32_t)0x00004000)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP15                     ((uint32_t)0x00038000)        /*!< SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define  ADC_SMPR1_SMP15_0                   ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP15_1                   ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP15_2                   ((uint32_t)0x00020000)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP16                     ((uint32_t)0x001C0000)        /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define  ADC_SMPR1_SMP16_0                   ((uint32_t)0x00040000)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP16_1                   ((uint32_t)0x00080000)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP16_2                   ((uint32_t)0x00100000)        /*!< Bit 2 */
+
+#define  ADC_SMPR1_SMP17                     ((uint32_t)0x00E00000)        /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define  ADC_SMPR1_SMP17_0                   ((uint32_t)0x00200000)        /*!< Bit 0 */
+#define  ADC_SMPR1_SMP17_1                   ((uint32_t)0x00400000)        /*!< Bit 1 */
+#define  ADC_SMPR1_SMP17_2                   ((uint32_t)0x00800000)        /*!< Bit 2 */
+
+/******************  Bit definition for ADC_SMPR2 register  *******************/
+#define  ADC_SMPR2_SMP0                      ((uint32_t)0x00000007)        /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define  ADC_SMPR2_SMP0_0                    ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP0_1                    ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP0_2                    ((uint32_t)0x00000004)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP1                      ((uint32_t)0x00000038)        /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define  ADC_SMPR2_SMP1_0                    ((uint32_t)0x00000008)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP1_1                    ((uint32_t)0x00000010)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP1_2                    ((uint32_t)0x00000020)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP2                      ((uint32_t)0x000001C0)        /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define  ADC_SMPR2_SMP2_0                    ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP2_1                    ((uint32_t)0x00000080)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP2_2                    ((uint32_t)0x00000100)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP3                      ((uint32_t)0x00000E00)        /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define  ADC_SMPR2_SMP3_0                    ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP3_1                    ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP3_2                    ((uint32_t)0x00000800)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP4                      ((uint32_t)0x00007000)        /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define  ADC_SMPR2_SMP4_0                    ((uint32_t)0x00001000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP4_1                    ((uint32_t)0x00002000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP4_2                    ((uint32_t)0x00004000)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP5                      ((uint32_t)0x00038000)        /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define  ADC_SMPR2_SMP5_0                    ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP5_1                    ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP5_2                    ((uint32_t)0x00020000)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP6                      ((uint32_t)0x001C0000)        /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define  ADC_SMPR2_SMP6_0                    ((uint32_t)0x00040000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP6_1                    ((uint32_t)0x00080000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP6_2                    ((uint32_t)0x00100000)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP7                      ((uint32_t)0x00E00000)        /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define  ADC_SMPR2_SMP7_0                    ((uint32_t)0x00200000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP7_1                    ((uint32_t)0x00400000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP7_2                    ((uint32_t)0x00800000)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP8                      ((uint32_t)0x07000000)        /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define  ADC_SMPR2_SMP8_0                    ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP8_1                    ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP8_2                    ((uint32_t)0x04000000)        /*!< Bit 2 */
+
+#define  ADC_SMPR2_SMP9                      ((uint32_t)0x38000000)        /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define  ADC_SMPR2_SMP9_0                    ((uint32_t)0x08000000)        /*!< Bit 0 */
+#define  ADC_SMPR2_SMP9_1                    ((uint32_t)0x10000000)        /*!< Bit 1 */
+#define  ADC_SMPR2_SMP9_2                    ((uint32_t)0x20000000)        /*!< Bit 2 */
+
+/******************  Bit definition for ADC_JOFR1 register  *******************/
+#define  ADC_JOFR1_JOFFSET1                  ((uint16_t)0x0FFF)            /*!< Data offset for injected channel 1 */
+
+/******************  Bit definition for ADC_JOFR2 register  *******************/
+#define  ADC_JOFR2_JOFFSET2                  ((uint16_t)0x0FFF)            /*!< Data offset for injected channel 2 */
+
+/******************  Bit definition for ADC_JOFR3 register  *******************/
+#define  ADC_JOFR3_JOFFSET3                  ((uint16_t)0x0FFF)            /*!< Data offset for injected channel 3 */
+
+/******************  Bit definition for ADC_JOFR4 register  *******************/
+#define  ADC_JOFR4_JOFFSET4                  ((uint16_t)0x0FFF)            /*!< Data offset for injected channel 4 */
+
+/*******************  Bit definition for ADC_HTR register  ********************/
+#define  ADC_HTR_HT                          ((uint16_t)0x0FFF)            /*!< Analog watchdog high threshold */
+
+/*******************  Bit definition for ADC_LTR register  ********************/
+#define  ADC_LTR_LT                          ((uint16_t)0x0FFF)            /*!< Analog watchdog low threshold */
+
+/*******************  Bit definition for ADC_SQR1 register  *******************/
+#define  ADC_SQR1_SQ13                       ((uint32_t)0x0000001F)        /*!< SQ13[4:0] bits (13th conversion in regular sequence) */
+#define  ADC_SQR1_SQ13_0                     ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_SQR1_SQ13_1                     ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_SQR1_SQ13_2                     ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  ADC_SQR1_SQ13_3                     ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  ADC_SQR1_SQ13_4                     ((uint32_t)0x00000010)        /*!< Bit 4 */
+
+#define  ADC_SQR1_SQ14                       ((uint32_t)0x000003E0)        /*!< SQ14[4:0] bits (14th conversion in regular sequence) */
+#define  ADC_SQR1_SQ14_0                     ((uint32_t)0x00000020)        /*!< Bit 0 */
+#define  ADC_SQR1_SQ14_1                     ((uint32_t)0x00000040)        /*!< Bit 1 */
+#define  ADC_SQR1_SQ14_2                     ((uint32_t)0x00000080)        /*!< Bit 2 */
+#define  ADC_SQR1_SQ14_3                     ((uint32_t)0x00000100)        /*!< Bit 3 */
+#define  ADC_SQR1_SQ14_4                     ((uint32_t)0x00000200)        /*!< Bit 4 */
+
+#define  ADC_SQR1_SQ15                       ((uint32_t)0x00007C00)        /*!< SQ15[4:0] bits (15th conversion in regular sequence) */
+#define  ADC_SQR1_SQ15_0                     ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  ADC_SQR1_SQ15_1                     ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  ADC_SQR1_SQ15_2                     ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  ADC_SQR1_SQ15_3                     ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  ADC_SQR1_SQ15_4                     ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  ADC_SQR1_SQ16                       ((uint32_t)0x000F8000)        /*!< SQ16[4:0] bits (16th conversion in regular sequence) */
+#define  ADC_SQR1_SQ16_0                     ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_SQR1_SQ16_1                     ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_SQR1_SQ16_2                     ((uint32_t)0x00020000)        /*!< Bit 2 */
+#define  ADC_SQR1_SQ16_3                     ((uint32_t)0x00040000)        /*!< Bit 3 */
+#define  ADC_SQR1_SQ16_4                     ((uint32_t)0x00080000)        /*!< Bit 4 */
+
+#define  ADC_SQR1_L                          ((uint32_t)0x00F00000)        /*!< L[3:0] bits (Regular channel sequence length) */
+#define  ADC_SQR1_L_0                        ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  ADC_SQR1_L_1                        ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  ADC_SQR1_L_2                        ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  ADC_SQR1_L_3                        ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+/*******************  Bit definition for ADC_SQR2 register  *******************/
+#define  ADC_SQR2_SQ7                        ((uint32_t)0x0000001F)        /*!< SQ7[4:0] bits (7th conversion in regular sequence) */
+#define  ADC_SQR2_SQ7_0                      ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ7_1                      ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ7_2                      ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ7_3                      ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ7_4                      ((uint32_t)0x00000010)        /*!< Bit 4 */
+
+#define  ADC_SQR2_SQ8                        ((uint32_t)0x000003E0)        /*!< SQ8[4:0] bits (8th conversion in regular sequence) */
+#define  ADC_SQR2_SQ8_0                      ((uint32_t)0x00000020)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ8_1                      ((uint32_t)0x00000040)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ8_2                      ((uint32_t)0x00000080)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ8_3                      ((uint32_t)0x00000100)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ8_4                      ((uint32_t)0x00000200)        /*!< Bit 4 */
+
+#define  ADC_SQR2_SQ9                        ((uint32_t)0x00007C00)        /*!< SQ9[4:0] bits (9th conversion in regular sequence) */
+#define  ADC_SQR2_SQ9_0                      ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ9_1                      ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ9_2                      ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ9_3                      ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ9_4                      ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  ADC_SQR2_SQ10                       ((uint32_t)0x000F8000)        /*!< SQ10[4:0] bits (10th conversion in regular sequence) */
+#define  ADC_SQR2_SQ10_0                     ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ10_1                     ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ10_2                     ((uint32_t)0x00020000)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ10_3                     ((uint32_t)0x00040000)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ10_4                     ((uint32_t)0x00080000)        /*!< Bit 4 */
+
+#define  ADC_SQR2_SQ11                       ((uint32_t)0x01F00000)        /*!< SQ11[4:0] bits (11th conversion in regular sequence) */
+#define  ADC_SQR2_SQ11_0                     ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ11_1                     ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ11_2                     ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ11_3                     ((uint32_t)0x00800000)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ11_4                     ((uint32_t)0x01000000)        /*!< Bit 4 */
+
+#define  ADC_SQR2_SQ12                       ((uint32_t)0x3E000000)        /*!< SQ12[4:0] bits (12th conversion in regular sequence) */
+#define  ADC_SQR2_SQ12_0                     ((uint32_t)0x02000000)        /*!< Bit 0 */
+#define  ADC_SQR2_SQ12_1                     ((uint32_t)0x04000000)        /*!< Bit 1 */
+#define  ADC_SQR2_SQ12_2                     ((uint32_t)0x08000000)        /*!< Bit 2 */
+#define  ADC_SQR2_SQ12_3                     ((uint32_t)0x10000000)        /*!< Bit 3 */
+#define  ADC_SQR2_SQ12_4                     ((uint32_t)0x20000000)        /*!< Bit 4 */
+
+/*******************  Bit definition for ADC_SQR3 register  *******************/
+#define  ADC_SQR3_SQ1                        ((uint32_t)0x0000001F)        /*!< SQ1[4:0] bits (1st conversion in regular sequence) */
+#define  ADC_SQR3_SQ1_0                      ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ1_1                      ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ1_2                      ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ1_3                      ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ1_4                      ((uint32_t)0x00000010)        /*!< Bit 4 */
+
+#define  ADC_SQR3_SQ2                        ((uint32_t)0x000003E0)        /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define  ADC_SQR3_SQ2_0                      ((uint32_t)0x00000020)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ2_1                      ((uint32_t)0x00000040)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ2_2                      ((uint32_t)0x00000080)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ2_3                      ((uint32_t)0x00000100)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ2_4                      ((uint32_t)0x00000200)        /*!< Bit 4 */
+
+#define  ADC_SQR3_SQ3                        ((uint32_t)0x00007C00)        /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define  ADC_SQR3_SQ3_0                      ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ3_1                      ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ3_2                      ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ3_3                      ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ3_4                      ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  ADC_SQR3_SQ4                        ((uint32_t)0x000F8000)        /*!< SQ4[4:0] bits (4th conversion in regular sequence) */
+#define  ADC_SQR3_SQ4_0                      ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ4_1                      ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ4_2                      ((uint32_t)0x00020000)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ4_3                      ((uint32_t)0x00040000)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ4_4                      ((uint32_t)0x00080000)        /*!< Bit 4 */
+
+#define  ADC_SQR3_SQ5                        ((uint32_t)0x01F00000)        /*!< SQ5[4:0] bits (5th conversion in regular sequence) */
+#define  ADC_SQR3_SQ5_0                      ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ5_1                      ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ5_2                      ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ5_3                      ((uint32_t)0x00800000)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ5_4                      ((uint32_t)0x01000000)        /*!< Bit 4 */
+
+#define  ADC_SQR3_SQ6                        ((uint32_t)0x3E000000)        /*!< SQ6[4:0] bits (6th conversion in regular sequence) */
+#define  ADC_SQR3_SQ6_0                      ((uint32_t)0x02000000)        /*!< Bit 0 */
+#define  ADC_SQR3_SQ6_1                      ((uint32_t)0x04000000)        /*!< Bit 1 */
+#define  ADC_SQR3_SQ6_2                      ((uint32_t)0x08000000)        /*!< Bit 2 */
+#define  ADC_SQR3_SQ6_3                      ((uint32_t)0x10000000)        /*!< Bit 3 */
+#define  ADC_SQR3_SQ6_4                      ((uint32_t)0x20000000)        /*!< Bit 4 */
+
+/*******************  Bit definition for ADC_JSQR register  *******************/
+#define  ADC_JSQR_JSQ1                       ((uint32_t)0x0000001F)        /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */  
+#define  ADC_JSQR_JSQ1_0                     ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  ADC_JSQR_JSQ1_1                     ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  ADC_JSQR_JSQ1_2                     ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  ADC_JSQR_JSQ1_3                     ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  ADC_JSQR_JSQ1_4                     ((uint32_t)0x00000010)        /*!< Bit 4 */
+
+#define  ADC_JSQR_JSQ2                       ((uint32_t)0x000003E0)        /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define  ADC_JSQR_JSQ2_0                     ((uint32_t)0x00000020)        /*!< Bit 0 */
+#define  ADC_JSQR_JSQ2_1                     ((uint32_t)0x00000040)        /*!< Bit 1 */
+#define  ADC_JSQR_JSQ2_2                     ((uint32_t)0x00000080)        /*!< Bit 2 */
+#define  ADC_JSQR_JSQ2_3                     ((uint32_t)0x00000100)        /*!< Bit 3 */
+#define  ADC_JSQR_JSQ2_4                     ((uint32_t)0x00000200)        /*!< Bit 4 */
+
+#define  ADC_JSQR_JSQ3                       ((uint32_t)0x00007C00)        /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define  ADC_JSQR_JSQ3_0                     ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  ADC_JSQR_JSQ3_1                     ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  ADC_JSQR_JSQ3_2                     ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  ADC_JSQR_JSQ3_3                     ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  ADC_JSQR_JSQ3_4                     ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  ADC_JSQR_JSQ4                       ((uint32_t)0x000F8000)        /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define  ADC_JSQR_JSQ4_0                     ((uint32_t)0x00008000)        /*!< Bit 0 */
+#define  ADC_JSQR_JSQ4_1                     ((uint32_t)0x00010000)        /*!< Bit 1 */
+#define  ADC_JSQR_JSQ4_2                     ((uint32_t)0x00020000)        /*!< Bit 2 */
+#define  ADC_JSQR_JSQ4_3                     ((uint32_t)0x00040000)        /*!< Bit 3 */
+#define  ADC_JSQR_JSQ4_4                     ((uint32_t)0x00080000)        /*!< Bit 4 */
+
+#define  ADC_JSQR_JL                         ((uint32_t)0x00300000)        /*!< JL[1:0] bits (Injected Sequence length) */
+#define  ADC_JSQR_JL_0                       ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  ADC_JSQR_JL_1                       ((uint32_t)0x00200000)        /*!< Bit 1 */
+
+/*******************  Bit definition for ADC_JDR1 register  *******************/
+#define  ADC_JDR1_JDATA                      ((uint16_t)0xFFFF)            /*!< Injected data */
+
+/*******************  Bit definition for ADC_JDR2 register  *******************/
+#define  ADC_JDR2_JDATA                      ((uint16_t)0xFFFF)            /*!< Injected data */
+
+/*******************  Bit definition for ADC_JDR3 register  *******************/
+#define  ADC_JDR3_JDATA                      ((uint16_t)0xFFFF)            /*!< Injected data */
+
+/*******************  Bit definition for ADC_JDR4 register  *******************/
+#define  ADC_JDR4_JDATA                      ((uint16_t)0xFFFF)            /*!< Injected data */
+
+/********************  Bit definition for ADC_DR register  ********************/
+#define  ADC_DR_DATA                         ((uint32_t)0x0000FFFF)        /*!< Regular data */
+#define  ADC_DR_ADC2DATA                     ((uint32_t)0xFFFF0000)        /*!< ADC2 data */
+
+/******************************************************************************/
+/*                                                                            */
+/*                      Digital to Analog Converter                           */
+/*                                                                            */
+/******************************************************************************/
+
+/********************  Bit definition for DAC_CR register  ********************/
+#define  DAC_CR_EN1                          ((uint32_t)0x00000001)        /*!< DAC channel1 enable */
+#define  DAC_CR_BOFF1                        ((uint32_t)0x00000002)        /*!< DAC channel1 output buffer disable */
+#define  DAC_CR_TEN1                         ((uint32_t)0x00000004)        /*!< DAC channel1 Trigger enable */
+
+#define  DAC_CR_TSEL1                        ((uint32_t)0x00000038)        /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define  DAC_CR_TSEL1_0                      ((uint32_t)0x00000008)        /*!< Bit 0 */
+#define  DAC_CR_TSEL1_1                      ((uint32_t)0x00000010)        /*!< Bit 1 */
+#define  DAC_CR_TSEL1_2                      ((uint32_t)0x00000020)        /*!< Bit 2 */
+
+#define  DAC_CR_WAVE1                        ((uint32_t)0x000000C0)        /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define  DAC_CR_WAVE1_0                      ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  DAC_CR_WAVE1_1                      ((uint32_t)0x00000080)        /*!< Bit 1 */
+
+#define  DAC_CR_MAMP1                        ((uint32_t)0x00000F00)        /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define  DAC_CR_MAMP1_0                      ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  DAC_CR_MAMP1_1                      ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  DAC_CR_MAMP1_2                      ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  DAC_CR_MAMP1_3                      ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+#define  DAC_CR_DMAEN1                       ((uint32_t)0x00001000)        /*!< DAC channel1 DMA enable */
+#define  DAC_CR_EN2                          ((uint32_t)0x00010000)        /*!< DAC channel2 enable */
+#define  DAC_CR_BOFF2                        ((uint32_t)0x00020000)        /*!< DAC channel2 output buffer disable */
+#define  DAC_CR_TEN2                         ((uint32_t)0x00040000)        /*!< DAC channel2 Trigger enable */
+
+#define  DAC_CR_TSEL2                        ((uint32_t)0x00380000)        /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define  DAC_CR_TSEL2_0                      ((uint32_t)0x00080000)        /*!< Bit 0 */
+#define  DAC_CR_TSEL2_1                      ((uint32_t)0x00100000)        /*!< Bit 1 */
+#define  DAC_CR_TSEL2_2                      ((uint32_t)0x00200000)        /*!< Bit 2 */
+
+#define  DAC_CR_WAVE2                        ((uint32_t)0x00C00000)        /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define  DAC_CR_WAVE2_0                      ((uint32_t)0x00400000)        /*!< Bit 0 */
+#define  DAC_CR_WAVE2_1                      ((uint32_t)0x00800000)        /*!< Bit 1 */
+
+#define  DAC_CR_MAMP2                        ((uint32_t)0x0F000000)        /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define  DAC_CR_MAMP2_0                      ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  DAC_CR_MAMP2_1                      ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  DAC_CR_MAMP2_2                      ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  DAC_CR_MAMP2_3                      ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  DAC_CR_DMAEN2                       ((uint32_t)0x10000000)        /*!< DAC channel2 DMA enabled */
+
+/*****************  Bit definition for DAC_SWTRIGR register  ******************/
+#define  DAC_SWTRIGR_SWTRIG1                 ((uint8_t)0x01)               /*!< DAC channel1 software trigger */
+#define  DAC_SWTRIGR_SWTRIG2                 ((uint8_t)0x02)               /*!< DAC channel2 software trigger */
+
+/*****************  Bit definition for DAC_DHR12R1 register  ******************/
+#define  DAC_DHR12R1_DACC1DHR                ((uint16_t)0x0FFF)            /*!< DAC channel1 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12L1 register  ******************/
+#define  DAC_DHR12L1_DACC1DHR                ((uint16_t)0xFFF0)            /*!< DAC channel1 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8R1 register  ******************/
+#define  DAC_DHR8R1_DACC1DHR                 ((uint8_t)0xFF)               /*!< DAC channel1 8-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12R2 register  ******************/
+#define  DAC_DHR12R2_DACC2DHR                ((uint16_t)0x0FFF)            /*!< DAC channel2 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12L2 register  ******************/
+#define  DAC_DHR12L2_DACC2DHR                ((uint16_t)0xFFF0)            /*!< DAC channel2 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8R2 register  ******************/
+#define  DAC_DHR8R2_DACC2DHR                 ((uint8_t)0xFF)               /*!< DAC channel2 8-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12RD register  ******************/
+#define  DAC_DHR12RD_DACC1DHR                ((uint32_t)0x00000FFF)        /*!< DAC channel1 12-bit Right aligned data */
+#define  DAC_DHR12RD_DACC2DHR                ((uint32_t)0x0FFF0000)        /*!< DAC channel2 12-bit Right aligned data */
+
+/*****************  Bit definition for DAC_DHR12LD register  ******************/
+#define  DAC_DHR12LD_DACC1DHR                ((uint32_t)0x0000FFF0)        /*!< DAC channel1 12-bit Left aligned data */
+#define  DAC_DHR12LD_DACC2DHR                ((uint32_t)0xFFF00000)        /*!< DAC channel2 12-bit Left aligned data */
+
+/******************  Bit definition for DAC_DHR8RD register  ******************/
+#define  DAC_DHR8RD_DACC1DHR                 ((uint16_t)0x00FF)            /*!< DAC channel1 8-bit Right aligned data */
+#define  DAC_DHR8RD_DACC2DHR                 ((uint16_t)0xFF00)            /*!< DAC channel2 8-bit Right aligned data */
+
+/*******************  Bit definition for DAC_DOR1 register  *******************/
+#define  DAC_DOR1_DACC1DOR                   ((uint16_t)0x0FFF)            /*!< DAC channel1 data output */
+
+/*******************  Bit definition for DAC_DOR2 register  *******************/
+#define  DAC_DOR2_DACC2DOR                   ((uint16_t)0x0FFF)            /*!< DAC channel2 data output */
+
+/********************  Bit definition for DAC_SR register  ********************/
+#define  DAC_SR_DMAUDR1                      ((uint32_t)0x00002000)        /*!< DAC channel1 DMA underrun flag */
+#define  DAC_SR_DMAUDR2                      ((uint32_t)0x20000000)        /*!< DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    CEC                                     */
+/*                                                                            */
+/******************************************************************************/
+/********************  Bit definition for CEC_CFGR register  ******************/
+#define  CEC_CFGR_PE              ((uint16_t)0x0001)     /*!<  Peripheral Enable */
+#define  CEC_CFGR_IE              ((uint16_t)0x0002)     /*!<  Interrupt Enable */
+#define  CEC_CFGR_BTEM            ((uint16_t)0x0004)     /*!<  Bit Timing Error Mode */
+#define  CEC_CFGR_BPEM            ((uint16_t)0x0008)     /*!<  Bit Period Error Mode */
+
+/********************  Bit definition for CEC_OAR register  ******************/
+#define  CEC_OAR_OA               ((uint16_t)0x000F)     /*!<  OA[3:0]: Own Address */
+#define  CEC_OAR_OA_0             ((uint16_t)0x0001)     /*!<  Bit 0 */
+#define  CEC_OAR_OA_1             ((uint16_t)0x0002)     /*!<  Bit 1 */
+#define  CEC_OAR_OA_2             ((uint16_t)0x0004)     /*!<  Bit 2 */
+#define  CEC_OAR_OA_3             ((uint16_t)0x0008)     /*!<  Bit 3 */
+
+/********************  Bit definition for CEC_PRES register  ******************/
+#define  CEC_PRES_PRES            ((uint16_t)0x3FFF)   /*!<  Prescaler Counter Value */
+
+/********************  Bit definition for CEC_ESR register  ******************/
+#define  CEC_ESR_BTE              ((uint16_t)0x0001)     /*!<  Bit Timing Error */
+#define  CEC_ESR_BPE              ((uint16_t)0x0002)     /*!<  Bit Period Error */
+#define  CEC_ESR_RBTFE            ((uint16_t)0x0004)     /*!<  Rx Block Transfer Finished Error */
+#define  CEC_ESR_SBE              ((uint16_t)0x0008)     /*!<  Start Bit Error */
+#define  CEC_ESR_ACKE             ((uint16_t)0x0010)     /*!<  Block Acknowledge Error */
+#define  CEC_ESR_LINE             ((uint16_t)0x0020)     /*!<  Line Error */
+#define  CEC_ESR_TBTFE            ((uint16_t)0x0040)     /*!<  Tx Block Transfer Finished Error */
+
+/********************  Bit definition for CEC_CSR register  ******************/
+#define  CEC_CSR_TSOM             ((uint16_t)0x0001)     /*!<  Tx Start Of Message */
+#define  CEC_CSR_TEOM             ((uint16_t)0x0002)     /*!<  Tx End Of Message */
+#define  CEC_CSR_TERR             ((uint16_t)0x0004)     /*!<  Tx Error */
+#define  CEC_CSR_TBTRF            ((uint16_t)0x0008)     /*!<  Tx Byte Transfer Request or Block Transfer Finished */
+#define  CEC_CSR_RSOM             ((uint16_t)0x0010)     /*!<  Rx Start Of Message */
+#define  CEC_CSR_REOM             ((uint16_t)0x0020)     /*!<  Rx End Of Message */
+#define  CEC_CSR_RERR             ((uint16_t)0x0040)     /*!<  Rx Error */
+#define  CEC_CSR_RBTF             ((uint16_t)0x0080)     /*!<  Rx Block Transfer Finished */
+
+/********************  Bit definition for CEC_TXD register  ******************/
+#define  CEC_TXD_TXD              ((uint16_t)0x00FF)     /*!<  Tx Data register */
+
+/********************  Bit definition for CEC_RXD register  ******************/
+#define  CEC_RXD_RXD              ((uint16_t)0x00FF)     /*!<  Rx Data register */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                    TIM                                     */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for TIM_CR1 register  ********************/
+#define  TIM_CR1_CEN                         ((uint16_t)0x0001)            /*!< Counter enable */
+#define  TIM_CR1_UDIS                        ((uint16_t)0x0002)            /*!< Update disable */
+#define  TIM_CR1_URS                         ((uint16_t)0x0004)            /*!< Update request source */
+#define  TIM_CR1_OPM                         ((uint16_t)0x0008)            /*!< One pulse mode */
+#define  TIM_CR1_DIR                         ((uint16_t)0x0010)            /*!< Direction */
+
+#define  TIM_CR1_CMS                         ((uint16_t)0x0060)            /*!< CMS[1:0] bits (Center-aligned mode selection) */
+#define  TIM_CR1_CMS_0                       ((uint16_t)0x0020)            /*!< Bit 0 */
+#define  TIM_CR1_CMS_1                       ((uint16_t)0x0040)            /*!< Bit 1 */
+
+#define  TIM_CR1_ARPE                        ((uint16_t)0x0080)            /*!< Auto-reload preload enable */
+
+#define  TIM_CR1_CKD                         ((uint16_t)0x0300)            /*!< CKD[1:0] bits (clock division) */
+#define  TIM_CR1_CKD_0                       ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_CR1_CKD_1                       ((uint16_t)0x0200)            /*!< Bit 1 */
+
+/*******************  Bit definition for TIM_CR2 register  ********************/
+#define  TIM_CR2_CCPC                        ((uint16_t)0x0001)            /*!< Capture/Compare Preloaded Control */
+#define  TIM_CR2_CCUS                        ((uint16_t)0x0004)            /*!< Capture/Compare Control Update Selection */
+#define  TIM_CR2_CCDS                        ((uint16_t)0x0008)            /*!< Capture/Compare DMA Selection */
+
+#define  TIM_CR2_MMS                         ((uint16_t)0x0070)            /*!< MMS[2:0] bits (Master Mode Selection) */
+#define  TIM_CR2_MMS_0                       ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_CR2_MMS_1                       ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_CR2_MMS_2                       ((uint16_t)0x0040)            /*!< Bit 2 */
+
+#define  TIM_CR2_TI1S                        ((uint16_t)0x0080)            /*!< TI1 Selection */
+#define  TIM_CR2_OIS1                        ((uint16_t)0x0100)            /*!< Output Idle state 1 (OC1 output) */
+#define  TIM_CR2_OIS1N                       ((uint16_t)0x0200)            /*!< Output Idle state 1 (OC1N output) */
+#define  TIM_CR2_OIS2                        ((uint16_t)0x0400)            /*!< Output Idle state 2 (OC2 output) */
+#define  TIM_CR2_OIS2N                       ((uint16_t)0x0800)            /*!< Output Idle state 2 (OC2N output) */
+#define  TIM_CR2_OIS3                        ((uint16_t)0x1000)            /*!< Output Idle state 3 (OC3 output) */
+#define  TIM_CR2_OIS3N                       ((uint16_t)0x2000)            /*!< Output Idle state 3 (OC3N output) */
+#define  TIM_CR2_OIS4                        ((uint16_t)0x4000)            /*!< Output Idle state 4 (OC4 output) */
+
+/*******************  Bit definition for TIM_SMCR register  *******************/
+#define  TIM_SMCR_SMS                        ((uint16_t)0x0007)            /*!< SMS[2:0] bits (Slave mode selection) */
+#define  TIM_SMCR_SMS_0                      ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  TIM_SMCR_SMS_1                      ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  TIM_SMCR_SMS_2                      ((uint16_t)0x0004)            /*!< Bit 2 */
+
+#define  TIM_SMCR_TS                         ((uint16_t)0x0070)            /*!< TS[2:0] bits (Trigger selection) */
+#define  TIM_SMCR_TS_0                       ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_SMCR_TS_1                       ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_SMCR_TS_2                       ((uint16_t)0x0040)            /*!< Bit 2 */
+
+#define  TIM_SMCR_MSM                        ((uint16_t)0x0080)            /*!< Master/slave mode */
+
+#define  TIM_SMCR_ETF                        ((uint16_t)0x0F00)            /*!< ETF[3:0] bits (External trigger filter) */
+#define  TIM_SMCR_ETF_0                      ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_SMCR_ETF_1                      ((uint16_t)0x0200)            /*!< Bit 1 */
+#define  TIM_SMCR_ETF_2                      ((uint16_t)0x0400)            /*!< Bit 2 */
+#define  TIM_SMCR_ETF_3                      ((uint16_t)0x0800)            /*!< Bit 3 */
+
+#define  TIM_SMCR_ETPS                       ((uint16_t)0x3000)            /*!< ETPS[1:0] bits (External trigger prescaler) */
+#define  TIM_SMCR_ETPS_0                     ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  TIM_SMCR_ETPS_1                     ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  TIM_SMCR_ECE                        ((uint16_t)0x4000)            /*!< External clock enable */
+#define  TIM_SMCR_ETP                        ((uint16_t)0x8000)            /*!< External trigger polarity */
+
+/*******************  Bit definition for TIM_DIER register  *******************/
+#define  TIM_DIER_UIE                        ((uint16_t)0x0001)            /*!< Update interrupt enable */
+#define  TIM_DIER_CC1IE                      ((uint16_t)0x0002)            /*!< Capture/Compare 1 interrupt enable */
+#define  TIM_DIER_CC2IE                      ((uint16_t)0x0004)            /*!< Capture/Compare 2 interrupt enable */
+#define  TIM_DIER_CC3IE                      ((uint16_t)0x0008)            /*!< Capture/Compare 3 interrupt enable */
+#define  TIM_DIER_CC4IE                      ((uint16_t)0x0010)            /*!< Capture/Compare 4 interrupt enable */
+#define  TIM_DIER_COMIE                      ((uint16_t)0x0020)            /*!< COM interrupt enable */
+#define  TIM_DIER_TIE                        ((uint16_t)0x0040)            /*!< Trigger interrupt enable */
+#define  TIM_DIER_BIE                        ((uint16_t)0x0080)            /*!< Break interrupt enable */
+#define  TIM_DIER_UDE                        ((uint16_t)0x0100)            /*!< Update DMA request enable */
+#define  TIM_DIER_CC1DE                      ((uint16_t)0x0200)            /*!< Capture/Compare 1 DMA request enable */
+#define  TIM_DIER_CC2DE                      ((uint16_t)0x0400)            /*!< Capture/Compare 2 DMA request enable */
+#define  TIM_DIER_CC3DE                      ((uint16_t)0x0800)            /*!< Capture/Compare 3 DMA request enable */
+#define  TIM_DIER_CC4DE                      ((uint16_t)0x1000)            /*!< Capture/Compare 4 DMA request enable */
+#define  TIM_DIER_COMDE                      ((uint16_t)0x2000)            /*!< COM DMA request enable */
+#define  TIM_DIER_TDE                        ((uint16_t)0x4000)            /*!< Trigger DMA request enable */
+
+/********************  Bit definition for TIM_SR register  ********************/
+#define  TIM_SR_UIF                          ((uint16_t)0x0001)            /*!< Update interrupt Flag */
+#define  TIM_SR_CC1IF                        ((uint16_t)0x0002)            /*!< Capture/Compare 1 interrupt Flag */
+#define  TIM_SR_CC2IF                        ((uint16_t)0x0004)            /*!< Capture/Compare 2 interrupt Flag */
+#define  TIM_SR_CC3IF                        ((uint16_t)0x0008)            /*!< Capture/Compare 3 interrupt Flag */
+#define  TIM_SR_CC4IF                        ((uint16_t)0x0010)            /*!< Capture/Compare 4 interrupt Flag */
+#define  TIM_SR_COMIF                        ((uint16_t)0x0020)            /*!< COM interrupt Flag */
+#define  TIM_SR_TIF                          ((uint16_t)0x0040)            /*!< Trigger interrupt Flag */
+#define  TIM_SR_BIF                          ((uint16_t)0x0080)            /*!< Break interrupt Flag */
+#define  TIM_SR_CC1OF                        ((uint16_t)0x0200)            /*!< Capture/Compare 1 Overcapture Flag */
+#define  TIM_SR_CC2OF                        ((uint16_t)0x0400)            /*!< Capture/Compare 2 Overcapture Flag */
+#define  TIM_SR_CC3OF                        ((uint16_t)0x0800)            /*!< Capture/Compare 3 Overcapture Flag */
+#define  TIM_SR_CC4OF                        ((uint16_t)0x1000)            /*!< Capture/Compare 4 Overcapture Flag */
+
+/*******************  Bit definition for TIM_EGR register  ********************/
+#define  TIM_EGR_UG                          ((uint8_t)0x01)               /*!< Update Generation */
+#define  TIM_EGR_CC1G                        ((uint8_t)0x02)               /*!< Capture/Compare 1 Generation */
+#define  TIM_EGR_CC2G                        ((uint8_t)0x04)               /*!< Capture/Compare 2 Generation */
+#define  TIM_EGR_CC3G                        ((uint8_t)0x08)               /*!< Capture/Compare 3 Generation */
+#define  TIM_EGR_CC4G                        ((uint8_t)0x10)               /*!< Capture/Compare 4 Generation */
+#define  TIM_EGR_COMG                        ((uint8_t)0x20)               /*!< Capture/Compare Control Update Generation */
+#define  TIM_EGR_TG                          ((uint8_t)0x40)               /*!< Trigger Generation */
+#define  TIM_EGR_BG                          ((uint8_t)0x80)               /*!< Break Generation */
+
+/******************  Bit definition for TIM_CCMR1 register  *******************/
+#define  TIM_CCMR1_CC1S                      ((uint16_t)0x0003)            /*!< CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define  TIM_CCMR1_CC1S_0                    ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  TIM_CCMR1_CC1S_1                    ((uint16_t)0x0002)            /*!< Bit 1 */
+
+#define  TIM_CCMR1_OC1FE                     ((uint16_t)0x0004)            /*!< Output Compare 1 Fast enable */
+#define  TIM_CCMR1_OC1PE                     ((uint16_t)0x0008)            /*!< Output Compare 1 Preload enable */
+
+#define  TIM_CCMR1_OC1M                      ((uint16_t)0x0070)            /*!< OC1M[2:0] bits (Output Compare 1 Mode) */
+#define  TIM_CCMR1_OC1M_0                    ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_CCMR1_OC1M_1                    ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_CCMR1_OC1M_2                    ((uint16_t)0x0040)            /*!< Bit 2 */
+
+#define  TIM_CCMR1_OC1CE                     ((uint16_t)0x0080)            /*!< Output Compare 1Clear Enable */
+
+#define  TIM_CCMR1_CC2S                      ((uint16_t)0x0300)            /*!< CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define  TIM_CCMR1_CC2S_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_CCMR1_CC2S_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  TIM_CCMR1_OC2FE                     ((uint16_t)0x0400)            /*!< Output Compare 2 Fast enable */
+#define  TIM_CCMR1_OC2PE                     ((uint16_t)0x0800)            /*!< Output Compare 2 Preload enable */
+
+#define  TIM_CCMR1_OC2M                      ((uint16_t)0x7000)            /*!< OC2M[2:0] bits (Output Compare 2 Mode) */
+#define  TIM_CCMR1_OC2M_0                    ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  TIM_CCMR1_OC2M_1                    ((uint16_t)0x2000)            /*!< Bit 1 */
+#define  TIM_CCMR1_OC2M_2                    ((uint16_t)0x4000)            /*!< Bit 2 */
+
+#define  TIM_CCMR1_OC2CE                     ((uint16_t)0x8000)            /*!< Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define  TIM_CCMR1_IC1PSC                    ((uint16_t)0x000C)            /*!< IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define  TIM_CCMR1_IC1PSC_0                  ((uint16_t)0x0004)            /*!< Bit 0 */
+#define  TIM_CCMR1_IC1PSC_1                  ((uint16_t)0x0008)            /*!< Bit 1 */
+
+#define  TIM_CCMR1_IC1F                      ((uint16_t)0x00F0)            /*!< IC1F[3:0] bits (Input Capture 1 Filter) */
+#define  TIM_CCMR1_IC1F_0                    ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_CCMR1_IC1F_1                    ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_CCMR1_IC1F_2                    ((uint16_t)0x0040)            /*!< Bit 2 */
+#define  TIM_CCMR1_IC1F_3                    ((uint16_t)0x0080)            /*!< Bit 3 */
+
+#define  TIM_CCMR1_IC2PSC                    ((uint16_t)0x0C00)            /*!< IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define  TIM_CCMR1_IC2PSC_0                  ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  TIM_CCMR1_IC2PSC_1                  ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  TIM_CCMR1_IC2F                      ((uint16_t)0xF000)            /*!< IC2F[3:0] bits (Input Capture 2 Filter) */
+#define  TIM_CCMR1_IC2F_0                    ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  TIM_CCMR1_IC2F_1                    ((uint16_t)0x2000)            /*!< Bit 1 */
+#define  TIM_CCMR1_IC2F_2                    ((uint16_t)0x4000)            /*!< Bit 2 */
+#define  TIM_CCMR1_IC2F_3                    ((uint16_t)0x8000)            /*!< Bit 3 */
+
+/******************  Bit definition for TIM_CCMR2 register  *******************/
+#define  TIM_CCMR2_CC3S                      ((uint16_t)0x0003)            /*!< CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define  TIM_CCMR2_CC3S_0                    ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  TIM_CCMR2_CC3S_1                    ((uint16_t)0x0002)            /*!< Bit 1 */
+
+#define  TIM_CCMR2_OC3FE                     ((uint16_t)0x0004)            /*!< Output Compare 3 Fast enable */
+#define  TIM_CCMR2_OC3PE                     ((uint16_t)0x0008)            /*!< Output Compare 3 Preload enable */
+
+#define  TIM_CCMR2_OC3M                      ((uint16_t)0x0070)            /*!< OC3M[2:0] bits (Output Compare 3 Mode) */
+#define  TIM_CCMR2_OC3M_0                    ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_CCMR2_OC3M_1                    ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_CCMR2_OC3M_2                    ((uint16_t)0x0040)            /*!< Bit 2 */
+
+#define  TIM_CCMR2_OC3CE                     ((uint16_t)0x0080)            /*!< Output Compare 3 Clear Enable */
+
+#define  TIM_CCMR2_CC4S                      ((uint16_t)0x0300)            /*!< CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define  TIM_CCMR2_CC4S_0                    ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_CCMR2_CC4S_1                    ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  TIM_CCMR2_OC4FE                     ((uint16_t)0x0400)            /*!< Output Compare 4 Fast enable */
+#define  TIM_CCMR2_OC4PE                     ((uint16_t)0x0800)            /*!< Output Compare 4 Preload enable */
+
+#define  TIM_CCMR2_OC4M                      ((uint16_t)0x7000)            /*!< OC4M[2:0] bits (Output Compare 4 Mode) */
+#define  TIM_CCMR2_OC4M_0                    ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  TIM_CCMR2_OC4M_1                    ((uint16_t)0x2000)            /*!< Bit 1 */
+#define  TIM_CCMR2_OC4M_2                    ((uint16_t)0x4000)            /*!< Bit 2 */
+
+#define  TIM_CCMR2_OC4CE                     ((uint16_t)0x8000)            /*!< Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define  TIM_CCMR2_IC3PSC                    ((uint16_t)0x000C)            /*!< IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define  TIM_CCMR2_IC3PSC_0                  ((uint16_t)0x0004)            /*!< Bit 0 */
+#define  TIM_CCMR2_IC3PSC_1                  ((uint16_t)0x0008)            /*!< Bit 1 */
+
+#define  TIM_CCMR2_IC3F                      ((uint16_t)0x00F0)            /*!< IC3F[3:0] bits (Input Capture 3 Filter) */
+#define  TIM_CCMR2_IC3F_0                    ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  TIM_CCMR2_IC3F_1                    ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  TIM_CCMR2_IC3F_2                    ((uint16_t)0x0040)            /*!< Bit 2 */
+#define  TIM_CCMR2_IC3F_3                    ((uint16_t)0x0080)            /*!< Bit 3 */
+
+#define  TIM_CCMR2_IC4PSC                    ((uint16_t)0x0C00)            /*!< IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define  TIM_CCMR2_IC4PSC_0                  ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  TIM_CCMR2_IC4PSC_1                  ((uint16_t)0x0800)            /*!< Bit 1 */
+
+#define  TIM_CCMR2_IC4F                      ((uint16_t)0xF000)            /*!< IC4F[3:0] bits (Input Capture 4 Filter) */
+#define  TIM_CCMR2_IC4F_0                    ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  TIM_CCMR2_IC4F_1                    ((uint16_t)0x2000)            /*!< Bit 1 */
+#define  TIM_CCMR2_IC4F_2                    ((uint16_t)0x4000)            /*!< Bit 2 */
+#define  TIM_CCMR2_IC4F_3                    ((uint16_t)0x8000)            /*!< Bit 3 */
+
+/*******************  Bit definition for TIM_CCER register  *******************/
+#define  TIM_CCER_CC1E                       ((uint16_t)0x0001)            /*!< Capture/Compare 1 output enable */
+#define  TIM_CCER_CC1P                       ((uint16_t)0x0002)            /*!< Capture/Compare 1 output Polarity */
+#define  TIM_CCER_CC1NE                      ((uint16_t)0x0004)            /*!< Capture/Compare 1 Complementary output enable */
+#define  TIM_CCER_CC1NP                      ((uint16_t)0x0008)            /*!< Capture/Compare 1 Complementary output Polarity */
+#define  TIM_CCER_CC2E                       ((uint16_t)0x0010)            /*!< Capture/Compare 2 output enable */
+#define  TIM_CCER_CC2P                       ((uint16_t)0x0020)            /*!< Capture/Compare 2 output Polarity */
+#define  TIM_CCER_CC2NE                      ((uint16_t)0x0040)            /*!< Capture/Compare 2 Complementary output enable */
+#define  TIM_CCER_CC2NP                      ((uint16_t)0x0080)            /*!< Capture/Compare 2 Complementary output Polarity */
+#define  TIM_CCER_CC3E                       ((uint16_t)0x0100)            /*!< Capture/Compare 3 output enable */
+#define  TIM_CCER_CC3P                       ((uint16_t)0x0200)            /*!< Capture/Compare 3 output Polarity */
+#define  TIM_CCER_CC3NE                      ((uint16_t)0x0400)            /*!< Capture/Compare 3 Complementary output enable */
+#define  TIM_CCER_CC3NP                      ((uint16_t)0x0800)            /*!< Capture/Compare 3 Complementary output Polarity */
+#define  TIM_CCER_CC4E                       ((uint16_t)0x1000)            /*!< Capture/Compare 4 output enable */
+#define  TIM_CCER_CC4P                       ((uint16_t)0x2000)            /*!< Capture/Compare 4 output Polarity */
+#define  TIM_CCER_CC4NP                      ((uint16_t)0x8000)            /*!< Capture/Compare 4 Complementary output Polarity */
+
+/*******************  Bit definition for TIM_CNT register  ********************/
+#define  TIM_CNT_CNT                         ((uint16_t)0xFFFF)            /*!< Counter Value */
+
+/*******************  Bit definition for TIM_PSC register  ********************/
+#define  TIM_PSC_PSC                         ((uint16_t)0xFFFF)            /*!< Prescaler Value */
+
+/*******************  Bit definition for TIM_ARR register  ********************/
+#define  TIM_ARR_ARR                         ((uint16_t)0xFFFF)            /*!< actual auto-reload Value */
+
+/*******************  Bit definition for TIM_RCR register  ********************/
+#define  TIM_RCR_REP                         ((uint8_t)0xFF)               /*!< Repetition Counter Value */
+
+/*******************  Bit definition for TIM_CCR1 register  *******************/
+#define  TIM_CCR1_CCR1                       ((uint16_t)0xFFFF)            /*!< Capture/Compare 1 Value */
+
+/*******************  Bit definition for TIM_CCR2 register  *******************/
+#define  TIM_CCR2_CCR2                       ((uint16_t)0xFFFF)            /*!< Capture/Compare 2 Value */
+
+/*******************  Bit definition for TIM_CCR3 register  *******************/
+#define  TIM_CCR3_CCR3                       ((uint16_t)0xFFFF)            /*!< Capture/Compare 3 Value */
+
+/*******************  Bit definition for TIM_CCR4 register  *******************/
+#define  TIM_CCR4_CCR4                       ((uint16_t)0xFFFF)            /*!< Capture/Compare 4 Value */
+
+/*******************  Bit definition for TIM_BDTR register  *******************/
+#define  TIM_BDTR_DTG                        ((uint16_t)0x00FF)            /*!< DTG[0:7] bits (Dead-Time Generator set-up) */
+#define  TIM_BDTR_DTG_0                      ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  TIM_BDTR_DTG_1                      ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  TIM_BDTR_DTG_2                      ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  TIM_BDTR_DTG_3                      ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  TIM_BDTR_DTG_4                      ((uint16_t)0x0010)            /*!< Bit 4 */
+#define  TIM_BDTR_DTG_5                      ((uint16_t)0x0020)            /*!< Bit 5 */
+#define  TIM_BDTR_DTG_6                      ((uint16_t)0x0040)            /*!< Bit 6 */
+#define  TIM_BDTR_DTG_7                      ((uint16_t)0x0080)            /*!< Bit 7 */
+
+#define  TIM_BDTR_LOCK                       ((uint16_t)0x0300)            /*!< LOCK[1:0] bits (Lock Configuration) */
+#define  TIM_BDTR_LOCK_0                     ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_BDTR_LOCK_1                     ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  TIM_BDTR_OSSI                       ((uint16_t)0x0400)            /*!< Off-State Selection for Idle mode */
+#define  TIM_BDTR_OSSR                       ((uint16_t)0x0800)            /*!< Off-State Selection for Run mode */
+#define  TIM_BDTR_BKE                        ((uint16_t)0x1000)            /*!< Break enable */
+#define  TIM_BDTR_BKP                        ((uint16_t)0x2000)            /*!< Break Polarity */
+#define  TIM_BDTR_AOE                        ((uint16_t)0x4000)            /*!< Automatic Output enable */
+#define  TIM_BDTR_MOE                        ((uint16_t)0x8000)            /*!< Main Output enable */
+
+/*******************  Bit definition for TIM_DCR register  ********************/
+#define  TIM_DCR_DBA                         ((uint16_t)0x001F)            /*!< DBA[4:0] bits (DMA Base Address) */
+#define  TIM_DCR_DBA_0                       ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  TIM_DCR_DBA_1                       ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  TIM_DCR_DBA_2                       ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  TIM_DCR_DBA_3                       ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  TIM_DCR_DBA_4                       ((uint16_t)0x0010)            /*!< Bit 4 */
+
+#define  TIM_DCR_DBL                         ((uint16_t)0x1F00)            /*!< DBL[4:0] bits (DMA Burst Length) */
+#define  TIM_DCR_DBL_0                       ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  TIM_DCR_DBL_1                       ((uint16_t)0x0200)            /*!< Bit 1 */
+#define  TIM_DCR_DBL_2                       ((uint16_t)0x0400)            /*!< Bit 2 */
+#define  TIM_DCR_DBL_3                       ((uint16_t)0x0800)            /*!< Bit 3 */
+#define  TIM_DCR_DBL_4                       ((uint16_t)0x1000)            /*!< Bit 4 */
+
+/*******************  Bit definition for TIM_DMAR register  *******************/
+#define  TIM_DMAR_DMAB                       ((uint16_t)0xFFFF)            /*!< DMA register for burst accesses */
+
+/******************************************************************************/
+/*                                                                            */
+/*                             Real-Time Clock                                */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for RTC_CRH register  ********************/
+#define  RTC_CRH_SECIE                       ((uint8_t)0x01)               /*!< Second Interrupt Enable */
+#define  RTC_CRH_ALRIE                       ((uint8_t)0x02)               /*!< Alarm Interrupt Enable */
+#define  RTC_CRH_OWIE                        ((uint8_t)0x04)               /*!< OverfloW Interrupt Enable */
+
+/*******************  Bit definition for RTC_CRL register  ********************/
+#define  RTC_CRL_SECF                        ((uint8_t)0x01)               /*!< Second Flag */
+#define  RTC_CRL_ALRF                        ((uint8_t)0x02)               /*!< Alarm Flag */
+#define  RTC_CRL_OWF                         ((uint8_t)0x04)               /*!< OverfloW Flag */
+#define  RTC_CRL_RSF                         ((uint8_t)0x08)               /*!< Registers Synchronized Flag */
+#define  RTC_CRL_CNF                         ((uint8_t)0x10)               /*!< Configuration Flag */
+#define  RTC_CRL_RTOFF                       ((uint8_t)0x20)               /*!< RTC operation OFF */
+
+/*******************  Bit definition for RTC_PRLH register  *******************/
+#define  RTC_PRLH_PRL                        ((uint16_t)0x000F)            /*!< RTC Prescaler Reload Value High */
+
+/*******************  Bit definition for RTC_PRLL register  *******************/
+#define  RTC_PRLL_PRL                        ((uint16_t)0xFFFF)            /*!< RTC Prescaler Reload Value Low */
+
+/*******************  Bit definition for RTC_DIVH register  *******************/
+#define  RTC_DIVH_RTC_DIV                    ((uint16_t)0x000F)            /*!< RTC Clock Divider High */
+
+/*******************  Bit definition for RTC_DIVL register  *******************/
+#define  RTC_DIVL_RTC_DIV                    ((uint16_t)0xFFFF)            /*!< RTC Clock Divider Low */
+
+/*******************  Bit definition for RTC_CNTH register  *******************/
+#define  RTC_CNTH_RTC_CNT                    ((uint16_t)0xFFFF)            /*!< RTC Counter High */
+
+/*******************  Bit definition for RTC_CNTL register  *******************/
+#define  RTC_CNTL_RTC_CNT                    ((uint16_t)0xFFFF)            /*!< RTC Counter Low */
+
+/*******************  Bit definition for RTC_ALRH register  *******************/
+#define  RTC_ALRH_RTC_ALR                    ((uint16_t)0xFFFF)            /*!< RTC Alarm High */
+
+/*******************  Bit definition for RTC_ALRL register  *******************/
+#define  RTC_ALRL_RTC_ALR                    ((uint16_t)0xFFFF)            /*!< RTC Alarm Low */
+
+/******************************************************************************/
+/*                                                                            */
+/*                           Independent WATCHDOG                             */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for IWDG_KR register  ********************/
+#define  IWDG_KR_KEY                         ((uint16_t)0xFFFF)            /*!< Key value (write only, read 0000h) */
+
+/*******************  Bit definition for IWDG_PR register  ********************/
+#define  IWDG_PR_PR                          ((uint8_t)0x07)               /*!< PR[2:0] (Prescaler divider) */
+#define  IWDG_PR_PR_0                        ((uint8_t)0x01)               /*!< Bit 0 */
+#define  IWDG_PR_PR_1                        ((uint8_t)0x02)               /*!< Bit 1 */
+#define  IWDG_PR_PR_2                        ((uint8_t)0x04)               /*!< Bit 2 */
+
+/*******************  Bit definition for IWDG_RLR register  *******************/
+#define  IWDG_RLR_RL                         ((uint16_t)0x0FFF)            /*!< Watchdog counter reload value */
+
+/*******************  Bit definition for IWDG_SR register  ********************/
+#define  IWDG_SR_PVU                         ((uint8_t)0x01)               /*!< Watchdog prescaler value update */
+#define  IWDG_SR_RVU                         ((uint8_t)0x02)               /*!< Watchdog counter reload value update */
+
+/******************************************************************************/
+/*                                                                            */
+/*                            Window WATCHDOG                                 */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for WWDG_CR register  ********************/
+#define  WWDG_CR_T                           ((uint8_t)0x7F)               /*!< T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define  WWDG_CR_T0                          ((uint8_t)0x01)               /*!< Bit 0 */
+#define  WWDG_CR_T1                          ((uint8_t)0x02)               /*!< Bit 1 */
+#define  WWDG_CR_T2                          ((uint8_t)0x04)               /*!< Bit 2 */
+#define  WWDG_CR_T3                          ((uint8_t)0x08)               /*!< Bit 3 */
+#define  WWDG_CR_T4                          ((uint8_t)0x10)               /*!< Bit 4 */
+#define  WWDG_CR_T5                          ((uint8_t)0x20)               /*!< Bit 5 */
+#define  WWDG_CR_T6                          ((uint8_t)0x40)               /*!< Bit 6 */
+
+#define  WWDG_CR_WDGA                        ((uint8_t)0x80)               /*!< Activation bit */
+
+/*******************  Bit definition for WWDG_CFR register  *******************/
+#define  WWDG_CFR_W                          ((uint16_t)0x007F)            /*!< W[6:0] bits (7-bit window value) */
+#define  WWDG_CFR_W0                         ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  WWDG_CFR_W1                         ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  WWDG_CFR_W2                         ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  WWDG_CFR_W3                         ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  WWDG_CFR_W4                         ((uint16_t)0x0010)            /*!< Bit 4 */
+#define  WWDG_CFR_W5                         ((uint16_t)0x0020)            /*!< Bit 5 */
+#define  WWDG_CFR_W6                         ((uint16_t)0x0040)            /*!< Bit 6 */
+
+#define  WWDG_CFR_WDGTB                      ((uint16_t)0x0180)            /*!< WDGTB[1:0] bits (Timer Base) */
+#define  WWDG_CFR_WDGTB0                     ((uint16_t)0x0080)            /*!< Bit 0 */
+#define  WWDG_CFR_WDGTB1                     ((uint16_t)0x0100)            /*!< Bit 1 */
+
+#define  WWDG_CFR_EWI                        ((uint16_t)0x0200)            /*!< Early Wakeup Interrupt */
+
+/*******************  Bit definition for WWDG_SR register  ********************/
+#define  WWDG_SR_EWIF                        ((uint8_t)0x01)               /*!< Early Wakeup Interrupt Flag */
+
+/******************************************************************************/
+/*                                                                            */
+/*                       Flexible Static Memory Controller                    */
+/*                                                                            */
+/******************************************************************************/
+
+/******************  Bit definition for FSMC_BCR1 register  *******************/
+#define  FSMC_BCR1_MBKEN                     ((uint32_t)0x00000001)        /*!< Memory bank enable bit */
+#define  FSMC_BCR1_MUXEN                     ((uint32_t)0x00000002)        /*!< Address/data multiplexing enable bit */
+
+#define  FSMC_BCR1_MTYP                      ((uint32_t)0x0000000C)        /*!< MTYP[1:0] bits (Memory type) */
+#define  FSMC_BCR1_MTYP_0                    ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  FSMC_BCR1_MTYP_1                    ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  FSMC_BCR1_MWID                      ((uint32_t)0x00000030)        /*!< MWID[1:0] bits (Memory data bus width) */
+#define  FSMC_BCR1_MWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BCR1_MWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_BCR1_FACCEN                    ((uint32_t)0x00000040)        /*!< Flash access enable */
+#define  FSMC_BCR1_BURSTEN                   ((uint32_t)0x00000100)        /*!< Burst enable bit */
+#define  FSMC_BCR1_WAITPOL                   ((uint32_t)0x00000200)        /*!< Wait signal polarity bit */
+#define  FSMC_BCR1_WRAPMOD                   ((uint32_t)0x00000400)        /*!< Wrapped burst mode support */
+#define  FSMC_BCR1_WAITCFG                   ((uint32_t)0x00000800)        /*!< Wait timing configuration */
+#define  FSMC_BCR1_WREN                      ((uint32_t)0x00001000)        /*!< Write enable bit */
+#define  FSMC_BCR1_WAITEN                    ((uint32_t)0x00002000)        /*!< Wait enable bit */
+#define  FSMC_BCR1_EXTMOD                    ((uint32_t)0x00004000)        /*!< Extended mode enable */
+#define  FSMC_BCR1_ASYNCWAIT                 ((uint32_t)0x00008000)       /*!< Asynchronous wait */
+#define  FSMC_BCR1_CBURSTRW                  ((uint32_t)0x00080000)        /*!< Write burst enable */
+
+/******************  Bit definition for FSMC_BCR2 register  *******************/
+#define  FSMC_BCR2_MBKEN                     ((uint32_t)0x00000001)        /*!< Memory bank enable bit */
+#define  FSMC_BCR2_MUXEN                     ((uint32_t)0x00000002)        /*!< Address/data multiplexing enable bit */
+
+#define  FSMC_BCR2_MTYP                      ((uint32_t)0x0000000C)        /*!< MTYP[1:0] bits (Memory type) */
+#define  FSMC_BCR2_MTYP_0                    ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  FSMC_BCR2_MTYP_1                    ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  FSMC_BCR2_MWID                      ((uint32_t)0x00000030)        /*!< MWID[1:0] bits (Memory data bus width) */
+#define  FSMC_BCR2_MWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BCR2_MWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_BCR2_FACCEN                    ((uint32_t)0x00000040)        /*!< Flash access enable */
+#define  FSMC_BCR2_BURSTEN                   ((uint32_t)0x00000100)        /*!< Burst enable bit */
+#define  FSMC_BCR2_WAITPOL                   ((uint32_t)0x00000200)        /*!< Wait signal polarity bit */
+#define  FSMC_BCR2_WRAPMOD                   ((uint32_t)0x00000400)        /*!< Wrapped burst mode support */
+#define  FSMC_BCR2_WAITCFG                   ((uint32_t)0x00000800)        /*!< Wait timing configuration */
+#define  FSMC_BCR2_WREN                      ((uint32_t)0x00001000)        /*!< Write enable bit */
+#define  FSMC_BCR2_WAITEN                    ((uint32_t)0x00002000)        /*!< Wait enable bit */
+#define  FSMC_BCR2_EXTMOD                    ((uint32_t)0x00004000)        /*!< Extended mode enable */
+#define  FSMC_BCR2_ASYNCWAIT                 ((uint32_t)0x00008000)       /*!< Asynchronous wait */
+#define  FSMC_BCR2_CBURSTRW                  ((uint32_t)0x00080000)        /*!< Write burst enable */
+
+/******************  Bit definition for FSMC_BCR3 register  *******************/
+#define  FSMC_BCR3_MBKEN                     ((uint32_t)0x00000001)        /*!< Memory bank enable bit */
+#define  FSMC_BCR3_MUXEN                     ((uint32_t)0x00000002)        /*!< Address/data multiplexing enable bit */
+
+#define  FSMC_BCR3_MTYP                      ((uint32_t)0x0000000C)        /*!< MTYP[1:0] bits (Memory type) */
+#define  FSMC_BCR3_MTYP_0                    ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  FSMC_BCR3_MTYP_1                    ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  FSMC_BCR3_MWID                      ((uint32_t)0x00000030)        /*!< MWID[1:0] bits (Memory data bus width) */
+#define  FSMC_BCR3_MWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BCR3_MWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_BCR3_FACCEN                    ((uint32_t)0x00000040)        /*!< Flash access enable */
+#define  FSMC_BCR3_BURSTEN                   ((uint32_t)0x00000100)        /*!< Burst enable bit */
+#define  FSMC_BCR3_WAITPOL                   ((uint32_t)0x00000200)        /*!< Wait signal polarity bit. */
+#define  FSMC_BCR3_WRAPMOD                   ((uint32_t)0x00000400)        /*!< Wrapped burst mode support */
+#define  FSMC_BCR3_WAITCFG                   ((uint32_t)0x00000800)        /*!< Wait timing configuration */
+#define  FSMC_BCR3_WREN                      ((uint32_t)0x00001000)        /*!< Write enable bit */
+#define  FSMC_BCR3_WAITEN                    ((uint32_t)0x00002000)        /*!< Wait enable bit */
+#define  FSMC_BCR3_EXTMOD                    ((uint32_t)0x00004000)        /*!< Extended mode enable */
+#define  FSMC_BCR3_ASYNCWAIT                 ((uint32_t)0x00008000)       /*!< Asynchronous wait */
+#define  FSMC_BCR3_CBURSTRW                  ((uint32_t)0x00080000)        /*!< Write burst enable */
+
+/******************  Bit definition for FSMC_BCR4 register  *******************/
+#define  FSMC_BCR4_MBKEN                     ((uint32_t)0x00000001)        /*!< Memory bank enable bit */
+#define  FSMC_BCR4_MUXEN                     ((uint32_t)0x00000002)        /*!< Address/data multiplexing enable bit */
+
+#define  FSMC_BCR4_MTYP                      ((uint32_t)0x0000000C)        /*!< MTYP[1:0] bits (Memory type) */
+#define  FSMC_BCR4_MTYP_0                    ((uint32_t)0x00000004)        /*!< Bit 0 */
+#define  FSMC_BCR4_MTYP_1                    ((uint32_t)0x00000008)        /*!< Bit 1 */
+
+#define  FSMC_BCR4_MWID                      ((uint32_t)0x00000030)        /*!< MWID[1:0] bits (Memory data bus width) */
+#define  FSMC_BCR4_MWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BCR4_MWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_BCR4_FACCEN                    ((uint32_t)0x00000040)        /*!< Flash access enable */
+#define  FSMC_BCR4_BURSTEN                   ((uint32_t)0x00000100)        /*!< Burst enable bit */
+#define  FSMC_BCR4_WAITPOL                   ((uint32_t)0x00000200)        /*!< Wait signal polarity bit */
+#define  FSMC_BCR4_WRAPMOD                   ((uint32_t)0x00000400)        /*!< Wrapped burst mode support */
+#define  FSMC_BCR4_WAITCFG                   ((uint32_t)0x00000800)        /*!< Wait timing configuration */
+#define  FSMC_BCR4_WREN                      ((uint32_t)0x00001000)        /*!< Write enable bit */
+#define  FSMC_BCR4_WAITEN                    ((uint32_t)0x00002000)        /*!< Wait enable bit */
+#define  FSMC_BCR4_EXTMOD                    ((uint32_t)0x00004000)        /*!< Extended mode enable */
+#define  FSMC_BCR4_ASYNCWAIT                 ((uint32_t)0x00008000)       /*!< Asynchronous wait */
+#define  FSMC_BCR4_CBURSTRW                  ((uint32_t)0x00080000)        /*!< Write burst enable */
+
+/******************  Bit definition for FSMC_BTR1 register  ******************/
+#define  FSMC_BTR1_ADDSET                    ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BTR1_ADDSET_0                  ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BTR1_ADDSET_1                  ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BTR1_ADDSET_2                  ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BTR1_ADDSET_3                  ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BTR1_ADDHLD                    ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BTR1_ADDHLD_0                  ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BTR1_ADDHLD_1                  ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BTR1_ADDHLD_2                  ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BTR1_ADDHLD_3                  ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BTR1_DATAST                    ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BTR1_DATAST_0                  ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BTR1_DATAST_1                  ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BTR1_DATAST_2                  ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BTR1_DATAST_3                  ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+#define  FSMC_BTR1_BUSTURN                   ((uint32_t)0x000F0000)        /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FSMC_BTR1_BUSTURN_0                 ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_BTR1_BUSTURN_1                 ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_BTR1_BUSTURN_2                 ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_BTR1_BUSTURN_3                 ((uint32_t)0x00080000)        /*!< Bit 3 */
+
+#define  FSMC_BTR1_CLKDIV                    ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BTR1_CLKDIV_0                  ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BTR1_CLKDIV_1                  ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BTR1_CLKDIV_2                  ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BTR1_CLKDIV_3                  ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BTR1_DATLAT                    ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BTR1_DATLAT_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BTR1_DATLAT_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BTR1_DATLAT_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BTR1_DATLAT_3                  ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BTR1_ACCMOD                    ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BTR1_ACCMOD_0                  ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BTR1_ACCMOD_1                  ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BTR2 register  *******************/
+#define  FSMC_BTR2_ADDSET                    ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BTR2_ADDSET_0                  ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BTR2_ADDSET_1                  ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BTR2_ADDSET_2                  ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BTR2_ADDSET_3                  ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BTR2_ADDHLD                    ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BTR2_ADDHLD_0                  ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BTR2_ADDHLD_1                  ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BTR2_ADDHLD_2                  ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BTR2_ADDHLD_3                  ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BTR2_DATAST                    ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BTR2_DATAST_0                  ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BTR2_DATAST_1                  ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BTR2_DATAST_2                  ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BTR2_DATAST_3                  ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+#define  FSMC_BTR2_BUSTURN                   ((uint32_t)0x000F0000)        /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FSMC_BTR2_BUSTURN_0                 ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_BTR2_BUSTURN_1                 ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_BTR2_BUSTURN_2                 ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_BTR2_BUSTURN_3                 ((uint32_t)0x00080000)        /*!< Bit 3 */
+
+#define  FSMC_BTR2_CLKDIV                    ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BTR2_CLKDIV_0                  ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BTR2_CLKDIV_1                  ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BTR2_CLKDIV_2                  ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BTR2_CLKDIV_3                  ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BTR2_DATLAT                    ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BTR2_DATLAT_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BTR2_DATLAT_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BTR2_DATLAT_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BTR2_DATLAT_3                  ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BTR2_ACCMOD                    ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BTR2_ACCMOD_0                  ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BTR2_ACCMOD_1                  ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/*******************  Bit definition for FSMC_BTR3 register  *******************/
+#define  FSMC_BTR3_ADDSET                    ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BTR3_ADDSET_0                  ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BTR3_ADDSET_1                  ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BTR3_ADDSET_2                  ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BTR3_ADDSET_3                  ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BTR3_ADDHLD                    ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BTR3_ADDHLD_0                  ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BTR3_ADDHLD_1                  ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BTR3_ADDHLD_2                  ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BTR3_ADDHLD_3                  ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BTR3_DATAST                    ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BTR3_DATAST_0                  ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BTR3_DATAST_1                  ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BTR3_DATAST_2                  ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BTR3_DATAST_3                  ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+#define  FSMC_BTR3_BUSTURN                   ((uint32_t)0x000F0000)        /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FSMC_BTR3_BUSTURN_0                 ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_BTR3_BUSTURN_1                 ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_BTR3_BUSTURN_2                 ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_BTR3_BUSTURN_3                 ((uint32_t)0x00080000)        /*!< Bit 3 */
+
+#define  FSMC_BTR3_CLKDIV                    ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BTR3_CLKDIV_0                  ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BTR3_CLKDIV_1                  ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BTR3_CLKDIV_2                  ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BTR3_CLKDIV_3                  ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BTR3_DATLAT                    ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BTR3_DATLAT_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BTR3_DATLAT_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BTR3_DATLAT_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BTR3_DATLAT_3                  ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BTR3_ACCMOD                    ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BTR3_ACCMOD_0                  ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BTR3_ACCMOD_1                  ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BTR4 register  *******************/
+#define  FSMC_BTR4_ADDSET                    ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BTR4_ADDSET_0                  ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BTR4_ADDSET_1                  ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BTR4_ADDSET_2                  ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BTR4_ADDSET_3                  ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BTR4_ADDHLD                    ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BTR4_ADDHLD_0                  ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BTR4_ADDHLD_1                  ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BTR4_ADDHLD_2                  ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BTR4_ADDHLD_3                  ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BTR4_DATAST                    ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BTR4_DATAST_0                  ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BTR4_DATAST_1                  ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BTR4_DATAST_2                  ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BTR4_DATAST_3                  ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+#define  FSMC_BTR4_BUSTURN                   ((uint32_t)0x000F0000)        /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define  FSMC_BTR4_BUSTURN_0                 ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_BTR4_BUSTURN_1                 ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_BTR4_BUSTURN_2                 ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_BTR4_BUSTURN_3                 ((uint32_t)0x00080000)        /*!< Bit 3 */
+
+#define  FSMC_BTR4_CLKDIV                    ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BTR4_CLKDIV_0                  ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BTR4_CLKDIV_1                  ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BTR4_CLKDIV_2                  ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BTR4_CLKDIV_3                  ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BTR4_DATLAT                    ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BTR4_DATLAT_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BTR4_DATLAT_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BTR4_DATLAT_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BTR4_DATLAT_3                  ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BTR4_ACCMOD                    ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BTR4_ACCMOD_0                  ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BTR4_ACCMOD_1                  ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BWTR1 register  ******************/
+#define  FSMC_BWTR1_ADDSET                   ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BWTR1_ADDSET_0                 ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BWTR1_ADDSET_1                 ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BWTR1_ADDSET_2                 ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BWTR1_ADDSET_3                 ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BWTR1_ADDHLD                   ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BWTR1_ADDHLD_0                 ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BWTR1_ADDHLD_1                 ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BWTR1_ADDHLD_2                 ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BWTR1_ADDHLD_3                 ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BWTR1_DATAST                   ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BWTR1_DATAST_0                 ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BWTR1_DATAST_1                 ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BWTR1_DATAST_2                 ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BWTR1_DATAST_3                 ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+#define  FSMC_BWTR1_CLKDIV                   ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BWTR1_CLKDIV_0                 ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BWTR1_CLKDIV_1                 ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BWTR1_CLKDIV_2                 ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BWTR1_CLKDIV_3                 ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR1_DATLAT                   ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BWTR1_DATLAT_0                 ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BWTR1_DATLAT_1                 ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BWTR1_DATLAT_2                 ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BWTR1_DATLAT_3                 ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR1_ACCMOD                   ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BWTR1_ACCMOD_0                 ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BWTR1_ACCMOD_1                 ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BWTR2 register  ******************/
+#define  FSMC_BWTR2_ADDSET                   ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BWTR2_ADDSET_0                 ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BWTR2_ADDSET_1                 ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BWTR2_ADDSET_2                 ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BWTR2_ADDSET_3                 ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BWTR2_ADDHLD                   ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BWTR2_ADDHLD_0                 ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BWTR2_ADDHLD_1                 ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BWTR2_ADDHLD_2                 ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BWTR2_ADDHLD_3                 ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BWTR2_DATAST                   ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BWTR2_DATAST_0                 ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BWTR2_DATAST_1                 ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BWTR2_DATAST_2                 ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BWTR2_DATAST_3                 ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+#define  FSMC_BWTR2_CLKDIV                   ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BWTR2_CLKDIV_0                 ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BWTR2_CLKDIV_1                 ((uint32_t)0x00200000)        /*!< Bit 1*/
+#define  FSMC_BWTR2_CLKDIV_2                 ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BWTR2_CLKDIV_3                 ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR2_DATLAT                   ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BWTR2_DATLAT_0                 ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BWTR2_DATLAT_1                 ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BWTR2_DATLAT_2                 ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BWTR2_DATLAT_3                 ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR2_ACCMOD                   ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BWTR2_ACCMOD_0                 ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BWTR2_ACCMOD_1                 ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BWTR3 register  ******************/
+#define  FSMC_BWTR3_ADDSET                   ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BWTR3_ADDSET_0                 ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BWTR3_ADDSET_1                 ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BWTR3_ADDSET_2                 ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BWTR3_ADDSET_3                 ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BWTR3_ADDHLD                   ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BWTR3_ADDHLD_0                 ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BWTR3_ADDHLD_1                 ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BWTR3_ADDHLD_2                 ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BWTR3_ADDHLD_3                 ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BWTR3_DATAST                   ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BWTR3_DATAST_0                 ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BWTR3_DATAST_1                 ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BWTR3_DATAST_2                 ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BWTR3_DATAST_3                 ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+#define  FSMC_BWTR3_CLKDIV                   ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BWTR3_CLKDIV_0                 ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BWTR3_CLKDIV_1                 ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BWTR3_CLKDIV_2                 ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BWTR3_CLKDIV_3                 ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR3_DATLAT                   ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BWTR3_DATLAT_0                 ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BWTR3_DATLAT_1                 ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BWTR3_DATLAT_2                 ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BWTR3_DATLAT_3                 ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR3_ACCMOD                   ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BWTR3_ACCMOD_0                 ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BWTR3_ACCMOD_1                 ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_BWTR4 register  ******************/
+#define  FSMC_BWTR4_ADDSET                   ((uint32_t)0x0000000F)        /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define  FSMC_BWTR4_ADDSET_0                 ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_BWTR4_ADDSET_1                 ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_BWTR4_ADDSET_2                 ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_BWTR4_ADDSET_3                 ((uint32_t)0x00000008)        /*!< Bit 3 */
+
+#define  FSMC_BWTR4_ADDHLD                   ((uint32_t)0x000000F0)        /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define  FSMC_BWTR4_ADDHLD_0                 ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_BWTR4_ADDHLD_1                 ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  FSMC_BWTR4_ADDHLD_2                 ((uint32_t)0x00000040)        /*!< Bit 2 */
+#define  FSMC_BWTR4_ADDHLD_3                 ((uint32_t)0x00000080)        /*!< Bit 3 */
+
+#define  FSMC_BWTR4_DATAST                   ((uint32_t)0x0000FF00)        /*!< DATAST [3:0] bits (Data-phase duration) */
+#define  FSMC_BWTR4_DATAST_0                 ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_BWTR4_DATAST_1                 ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_BWTR4_DATAST_2                 ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_BWTR4_DATAST_3                 ((uint32_t)0x00000800)        /*!< Bit 3 */
+
+#define  FSMC_BWTR4_CLKDIV                   ((uint32_t)0x00F00000)        /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define  FSMC_BWTR4_CLKDIV_0                 ((uint32_t)0x00100000)        /*!< Bit 0 */
+#define  FSMC_BWTR4_CLKDIV_1                 ((uint32_t)0x00200000)        /*!< Bit 1 */
+#define  FSMC_BWTR4_CLKDIV_2                 ((uint32_t)0x00400000)        /*!< Bit 2 */
+#define  FSMC_BWTR4_CLKDIV_3                 ((uint32_t)0x00800000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR4_DATLAT                   ((uint32_t)0x0F000000)        /*!< DATLA[3:0] bits (Data latency) */
+#define  FSMC_BWTR4_DATLAT_0                 ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_BWTR4_DATLAT_1                 ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_BWTR4_DATLAT_2                 ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_BWTR4_DATLAT_3                 ((uint32_t)0x08000000)        /*!< Bit 3 */
+
+#define  FSMC_BWTR4_ACCMOD                   ((uint32_t)0x30000000)        /*!< ACCMOD[1:0] bits (Access mode) */
+#define  FSMC_BWTR4_ACCMOD_0                 ((uint32_t)0x10000000)        /*!< Bit 0 */
+#define  FSMC_BWTR4_ACCMOD_1                 ((uint32_t)0x20000000)        /*!< Bit 1 */
+
+/******************  Bit definition for FSMC_PCR2 register  *******************/
+#define  FSMC_PCR2_PWAITEN                   ((uint32_t)0x00000002)        /*!< Wait feature enable bit */
+#define  FSMC_PCR2_PBKEN                     ((uint32_t)0x00000004)        /*!< PC Card/NAND Flash memory bank enable bit */
+#define  FSMC_PCR2_PTYP                      ((uint32_t)0x00000008)        /*!< Memory type */
+
+#define  FSMC_PCR2_PWID                      ((uint32_t)0x00000030)        /*!< PWID[1:0] bits (NAND Flash databus width) */
+#define  FSMC_PCR2_PWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_PCR2_PWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_PCR2_ECCEN                     ((uint32_t)0x00000040)        /*!< ECC computation logic enable bit */
+
+#define  FSMC_PCR2_TCLR                      ((uint32_t)0x00001E00)        /*!< TCLR[3:0] bits (CLE to RE delay) */
+#define  FSMC_PCR2_TCLR_0                    ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  FSMC_PCR2_TCLR_1                    ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  FSMC_PCR2_TCLR_2                    ((uint32_t)0x00000800)        /*!< Bit 2 */
+#define  FSMC_PCR2_TCLR_3                    ((uint32_t)0x00001000)        /*!< Bit 3 */
+
+#define  FSMC_PCR2_TAR                       ((uint32_t)0x0001E000)        /*!< TAR[3:0] bits (ALE to RE delay) */
+#define  FSMC_PCR2_TAR_0                     ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define  FSMC_PCR2_TAR_1                     ((uint32_t)0x00004000)        /*!< Bit 1 */
+#define  FSMC_PCR2_TAR_2                     ((uint32_t)0x00008000)        /*!< Bit 2 */
+#define  FSMC_PCR2_TAR_3                     ((uint32_t)0x00010000)        /*!< Bit 3 */
+
+#define  FSMC_PCR2_ECCPS                     ((uint32_t)0x000E0000)        /*!< ECCPS[1:0] bits (ECC page size) */
+#define  FSMC_PCR2_ECCPS_0                   ((uint32_t)0x00020000)        /*!< Bit 0 */
+#define  FSMC_PCR2_ECCPS_1                   ((uint32_t)0x00040000)        /*!< Bit 1 */
+#define  FSMC_PCR2_ECCPS_2                   ((uint32_t)0x00080000)        /*!< Bit 2 */
+
+/******************  Bit definition for FSMC_PCR3 register  *******************/
+#define  FSMC_PCR3_PWAITEN                   ((uint32_t)0x00000002)        /*!< Wait feature enable bit */
+#define  FSMC_PCR3_PBKEN                     ((uint32_t)0x00000004)        /*!< PC Card/NAND Flash memory bank enable bit */
+#define  FSMC_PCR3_PTYP                      ((uint32_t)0x00000008)        /*!< Memory type */
+
+#define  FSMC_PCR3_PWID                      ((uint32_t)0x00000030)        /*!< PWID[1:0] bits (NAND Flash databus width) */
+#define  FSMC_PCR3_PWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_PCR3_PWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_PCR3_ECCEN                     ((uint32_t)0x00000040)        /*!< ECC computation logic enable bit */
+
+#define  FSMC_PCR3_TCLR                      ((uint32_t)0x00001E00)        /*!< TCLR[3:0] bits (CLE to RE delay) */
+#define  FSMC_PCR3_TCLR_0                    ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  FSMC_PCR3_TCLR_1                    ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  FSMC_PCR3_TCLR_2                    ((uint32_t)0x00000800)        /*!< Bit 2 */
+#define  FSMC_PCR3_TCLR_3                    ((uint32_t)0x00001000)        /*!< Bit 3 */
+
+#define  FSMC_PCR3_TAR                       ((uint32_t)0x0001E000)        /*!< TAR[3:0] bits (ALE to RE delay) */
+#define  FSMC_PCR3_TAR_0                     ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define  FSMC_PCR3_TAR_1                     ((uint32_t)0x00004000)        /*!< Bit 1 */
+#define  FSMC_PCR3_TAR_2                     ((uint32_t)0x00008000)        /*!< Bit 2 */
+#define  FSMC_PCR3_TAR_3                     ((uint32_t)0x00010000)        /*!< Bit 3 */
+
+#define  FSMC_PCR3_ECCPS                     ((uint32_t)0x000E0000)        /*!< ECCPS[2:0] bits (ECC page size) */
+#define  FSMC_PCR3_ECCPS_0                   ((uint32_t)0x00020000)        /*!< Bit 0 */
+#define  FSMC_PCR3_ECCPS_1                   ((uint32_t)0x00040000)        /*!< Bit 1 */
+#define  FSMC_PCR3_ECCPS_2                   ((uint32_t)0x00080000)        /*!< Bit 2 */
+
+/******************  Bit definition for FSMC_PCR4 register  *******************/
+#define  FSMC_PCR4_PWAITEN                   ((uint32_t)0x00000002)        /*!< Wait feature enable bit */
+#define  FSMC_PCR4_PBKEN                     ((uint32_t)0x00000004)        /*!< PC Card/NAND Flash memory bank enable bit */
+#define  FSMC_PCR4_PTYP                      ((uint32_t)0x00000008)        /*!< Memory type */
+
+#define  FSMC_PCR4_PWID                      ((uint32_t)0x00000030)        /*!< PWID[1:0] bits (NAND Flash databus width) */
+#define  FSMC_PCR4_PWID_0                    ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  FSMC_PCR4_PWID_1                    ((uint32_t)0x00000020)        /*!< Bit 1 */
+
+#define  FSMC_PCR4_ECCEN                     ((uint32_t)0x00000040)        /*!< ECC computation logic enable bit */
+
+#define  FSMC_PCR4_TCLR                      ((uint32_t)0x00001E00)        /*!< TCLR[3:0] bits (CLE to RE delay) */
+#define  FSMC_PCR4_TCLR_0                    ((uint32_t)0x00000200)        /*!< Bit 0 */
+#define  FSMC_PCR4_TCLR_1                    ((uint32_t)0x00000400)        /*!< Bit 1 */
+#define  FSMC_PCR4_TCLR_2                    ((uint32_t)0x00000800)        /*!< Bit 2 */
+#define  FSMC_PCR4_TCLR_3                    ((uint32_t)0x00001000)        /*!< Bit 3 */
+
+#define  FSMC_PCR4_TAR                       ((uint32_t)0x0001E000)        /*!< TAR[3:0] bits (ALE to RE delay) */
+#define  FSMC_PCR4_TAR_0                     ((uint32_t)0x00002000)        /*!< Bit 0 */
+#define  FSMC_PCR4_TAR_1                     ((uint32_t)0x00004000)        /*!< Bit 1 */
+#define  FSMC_PCR4_TAR_2                     ((uint32_t)0x00008000)        /*!< Bit 2 */
+#define  FSMC_PCR4_TAR_3                     ((uint32_t)0x00010000)        /*!< Bit 3 */
+
+#define  FSMC_PCR4_ECCPS                     ((uint32_t)0x000E0000)        /*!< ECCPS[2:0] bits (ECC page size) */
+#define  FSMC_PCR4_ECCPS_0                   ((uint32_t)0x00020000)        /*!< Bit 0 */
+#define  FSMC_PCR4_ECCPS_1                   ((uint32_t)0x00040000)        /*!< Bit 1 */
+#define  FSMC_PCR4_ECCPS_2                   ((uint32_t)0x00080000)        /*!< Bit 2 */
+
+/*******************  Bit definition for FSMC_SR2 register  *******************/
+#define  FSMC_SR2_IRS                        ((uint8_t)0x01)               /*!< Interrupt Rising Edge status */
+#define  FSMC_SR2_ILS                        ((uint8_t)0x02)               /*!< Interrupt Level status */
+#define  FSMC_SR2_IFS                        ((uint8_t)0x04)               /*!< Interrupt Falling Edge status */
+#define  FSMC_SR2_IREN                       ((uint8_t)0x08)               /*!< Interrupt Rising Edge detection Enable bit */
+#define  FSMC_SR2_ILEN                       ((uint8_t)0x10)               /*!< Interrupt Level detection Enable bit */
+#define  FSMC_SR2_IFEN                       ((uint8_t)0x20)               /*!< Interrupt Falling Edge detection Enable bit */
+#define  FSMC_SR2_FEMPT                      ((uint8_t)0x40)               /*!< FIFO empty */
+
+/*******************  Bit definition for FSMC_SR3 register  *******************/
+#define  FSMC_SR3_IRS                        ((uint8_t)0x01)               /*!< Interrupt Rising Edge status */
+#define  FSMC_SR3_ILS                        ((uint8_t)0x02)               /*!< Interrupt Level status */
+#define  FSMC_SR3_IFS                        ((uint8_t)0x04)               /*!< Interrupt Falling Edge status */
+#define  FSMC_SR3_IREN                       ((uint8_t)0x08)               /*!< Interrupt Rising Edge detection Enable bit */
+#define  FSMC_SR3_ILEN                       ((uint8_t)0x10)               /*!< Interrupt Level detection Enable bit */
+#define  FSMC_SR3_IFEN                       ((uint8_t)0x20)               /*!< Interrupt Falling Edge detection Enable bit */
+#define  FSMC_SR3_FEMPT                      ((uint8_t)0x40)               /*!< FIFO empty */
+
+/*******************  Bit definition for FSMC_SR4 register  *******************/
+#define  FSMC_SR4_IRS                        ((uint8_t)0x01)               /*!< Interrupt Rising Edge status */
+#define  FSMC_SR4_ILS                        ((uint8_t)0x02)               /*!< Interrupt Level status */
+#define  FSMC_SR4_IFS                        ((uint8_t)0x04)               /*!< Interrupt Falling Edge status */
+#define  FSMC_SR4_IREN                       ((uint8_t)0x08)               /*!< Interrupt Rising Edge detection Enable bit */
+#define  FSMC_SR4_ILEN                       ((uint8_t)0x10)               /*!< Interrupt Level detection Enable bit */
+#define  FSMC_SR4_IFEN                       ((uint8_t)0x20)               /*!< Interrupt Falling Edge detection Enable bit */
+#define  FSMC_SR4_FEMPT                      ((uint8_t)0x40)               /*!< FIFO empty */
+
+/******************  Bit definition for FSMC_PMEM2 register  ******************/
+#define  FSMC_PMEM2_MEMSET2                  ((uint32_t)0x000000FF)        /*!< MEMSET2[7:0] bits (Common memory 2 setup time) */
+#define  FSMC_PMEM2_MEMSET2_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PMEM2_MEMSET2_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PMEM2_MEMSET2_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PMEM2_MEMSET2_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PMEM2_MEMSET2_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PMEM2_MEMSET2_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PMEM2_MEMSET2_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PMEM2_MEMSET2_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PMEM2_MEMWAIT2                 ((uint32_t)0x0000FF00)        /*!< MEMWAIT2[7:0] bits (Common memory 2 wait time) */
+#define  FSMC_PMEM2_MEMWAIT2_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PMEM2_MEMWAIT2_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PMEM2_MEMWAIT2_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PMEM2_MEMWAIT2_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PMEM2_MEMWAIT2_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PMEM2_MEMWAIT2_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PMEM2_MEMWAIT2_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PMEM2_MEMWAIT2_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM2_MEMHOLD2                 ((uint32_t)0x00FF0000)        /*!< MEMHOLD2[7:0] bits (Common memory 2 hold time) */
+#define  FSMC_PMEM2_MEMHOLD2_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PMEM2_MEMHOLD2_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PMEM2_MEMHOLD2_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PMEM2_MEMHOLD2_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PMEM2_MEMHOLD2_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PMEM2_MEMHOLD2_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PMEM2_MEMHOLD2_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PMEM2_MEMHOLD2_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM2_MEMHIZ2                  ((uint32_t)0xFF000000)        /*!< MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */
+#define  FSMC_PMEM2_MEMHIZ2_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PMEM2_MEMHIZ2_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PMEM2_MEMHIZ2_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PMEM2_MEMHIZ2_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PMEM2_MEMHIZ2_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PMEM2_MEMHIZ2_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PMEM2_MEMHIZ2_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PMEM2_MEMHIZ2_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PMEM3 register  ******************/
+#define  FSMC_PMEM3_MEMSET3                  ((uint32_t)0x000000FF)        /*!< MEMSET3[7:0] bits (Common memory 3 setup time) */
+#define  FSMC_PMEM3_MEMSET3_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PMEM3_MEMSET3_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PMEM3_MEMSET3_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PMEM3_MEMSET3_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PMEM3_MEMSET3_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PMEM3_MEMSET3_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PMEM3_MEMSET3_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PMEM3_MEMSET3_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PMEM3_MEMWAIT3                 ((uint32_t)0x0000FF00)        /*!< MEMWAIT3[7:0] bits (Common memory 3 wait time) */
+#define  FSMC_PMEM3_MEMWAIT3_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PMEM3_MEMWAIT3_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PMEM3_MEMWAIT3_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PMEM3_MEMWAIT3_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PMEM3_MEMWAIT3_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PMEM3_MEMWAIT3_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PMEM3_MEMWAIT3_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PMEM3_MEMWAIT3_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM3_MEMHOLD3                 ((uint32_t)0x00FF0000)        /*!< MEMHOLD3[7:0] bits (Common memory 3 hold time) */
+#define  FSMC_PMEM3_MEMHOLD3_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PMEM3_MEMHOLD3_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PMEM3_MEMHOLD3_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PMEM3_MEMHOLD3_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PMEM3_MEMHOLD3_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PMEM3_MEMHOLD3_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PMEM3_MEMHOLD3_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PMEM3_MEMHOLD3_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM3_MEMHIZ3                  ((uint32_t)0xFF000000)        /*!< MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */
+#define  FSMC_PMEM3_MEMHIZ3_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PMEM3_MEMHIZ3_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PMEM3_MEMHIZ3_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PMEM3_MEMHIZ3_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PMEM3_MEMHIZ3_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PMEM3_MEMHIZ3_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PMEM3_MEMHIZ3_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PMEM3_MEMHIZ3_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PMEM4 register  ******************/
+#define  FSMC_PMEM4_MEMSET4                  ((uint32_t)0x000000FF)        /*!< MEMSET4[7:0] bits (Common memory 4 setup time) */
+#define  FSMC_PMEM4_MEMSET4_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PMEM4_MEMSET4_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PMEM4_MEMSET4_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PMEM4_MEMSET4_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PMEM4_MEMSET4_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PMEM4_MEMSET4_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PMEM4_MEMSET4_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PMEM4_MEMSET4_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PMEM4_MEMWAIT4                 ((uint32_t)0x0000FF00)        /*!< MEMWAIT4[7:0] bits (Common memory 4 wait time) */
+#define  FSMC_PMEM4_MEMWAIT4_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PMEM4_MEMWAIT4_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PMEM4_MEMWAIT4_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PMEM4_MEMWAIT4_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PMEM4_MEMWAIT4_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PMEM4_MEMWAIT4_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PMEM4_MEMWAIT4_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PMEM4_MEMWAIT4_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM4_MEMHOLD4                 ((uint32_t)0x00FF0000)        /*!< MEMHOLD4[7:0] bits (Common memory 4 hold time) */
+#define  FSMC_PMEM4_MEMHOLD4_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PMEM4_MEMHOLD4_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PMEM4_MEMHOLD4_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PMEM4_MEMHOLD4_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PMEM4_MEMHOLD4_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PMEM4_MEMHOLD4_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PMEM4_MEMHOLD4_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PMEM4_MEMHOLD4_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PMEM4_MEMHIZ4                  ((uint32_t)0xFF000000)        /*!< MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */
+#define  FSMC_PMEM4_MEMHIZ4_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PMEM4_MEMHIZ4_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PMEM4_MEMHIZ4_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PMEM4_MEMHIZ4_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PMEM4_MEMHIZ4_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PMEM4_MEMHIZ4_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PMEM4_MEMHIZ4_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PMEM4_MEMHIZ4_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PATT2 register  ******************/
+#define  FSMC_PATT2_ATTSET2                  ((uint32_t)0x000000FF)        /*!< ATTSET2[7:0] bits (Attribute memory 2 setup time) */
+#define  FSMC_PATT2_ATTSET2_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PATT2_ATTSET2_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PATT2_ATTSET2_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PATT2_ATTSET2_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PATT2_ATTSET2_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PATT2_ATTSET2_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PATT2_ATTSET2_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PATT2_ATTSET2_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PATT2_ATTWAIT2                 ((uint32_t)0x0000FF00)        /*!< ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */
+#define  FSMC_PATT2_ATTWAIT2_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PATT2_ATTWAIT2_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PATT2_ATTWAIT2_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PATT2_ATTWAIT2_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PATT2_ATTWAIT2_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PATT2_ATTWAIT2_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PATT2_ATTWAIT2_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PATT2_ATTWAIT2_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PATT2_ATTHOLD2                 ((uint32_t)0x00FF0000)        /*!< ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */
+#define  FSMC_PATT2_ATTHOLD2_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PATT2_ATTHOLD2_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PATT2_ATTHOLD2_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PATT2_ATTHOLD2_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PATT2_ATTHOLD2_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PATT2_ATTHOLD2_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PATT2_ATTHOLD2_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PATT2_ATTHOLD2_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PATT2_ATTHIZ2                  ((uint32_t)0xFF000000)        /*!< ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */
+#define  FSMC_PATT2_ATTHIZ2_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PATT2_ATTHIZ2_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PATT2_ATTHIZ2_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PATT2_ATTHIZ2_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PATT2_ATTHIZ2_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PATT2_ATTHIZ2_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PATT2_ATTHIZ2_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PATT2_ATTHIZ2_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PATT3 register  ******************/
+#define  FSMC_PATT3_ATTSET3                  ((uint32_t)0x000000FF)        /*!< ATTSET3[7:0] bits (Attribute memory 3 setup time) */
+#define  FSMC_PATT3_ATTSET3_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PATT3_ATTSET3_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PATT3_ATTSET3_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PATT3_ATTSET3_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PATT3_ATTSET3_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PATT3_ATTSET3_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PATT3_ATTSET3_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PATT3_ATTSET3_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PATT3_ATTWAIT3                 ((uint32_t)0x0000FF00)        /*!< ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */
+#define  FSMC_PATT3_ATTWAIT3_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PATT3_ATTWAIT3_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PATT3_ATTWAIT3_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PATT3_ATTWAIT3_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PATT3_ATTWAIT3_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PATT3_ATTWAIT3_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PATT3_ATTWAIT3_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PATT3_ATTWAIT3_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PATT3_ATTHOLD3                 ((uint32_t)0x00FF0000)        /*!< ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */
+#define  FSMC_PATT3_ATTHOLD3_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PATT3_ATTHOLD3_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PATT3_ATTHOLD3_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PATT3_ATTHOLD3_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PATT3_ATTHOLD3_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PATT3_ATTHOLD3_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PATT3_ATTHOLD3_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PATT3_ATTHOLD3_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PATT3_ATTHIZ3                  ((uint32_t)0xFF000000)        /*!< ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */
+#define  FSMC_PATT3_ATTHIZ3_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PATT3_ATTHIZ3_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PATT3_ATTHIZ3_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PATT3_ATTHIZ3_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PATT3_ATTHIZ3_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PATT3_ATTHIZ3_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PATT3_ATTHIZ3_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PATT3_ATTHIZ3_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PATT4 register  ******************/
+#define  FSMC_PATT4_ATTSET4                  ((uint32_t)0x000000FF)        /*!< ATTSET4[7:0] bits (Attribute memory 4 setup time) */
+#define  FSMC_PATT4_ATTSET4_0                ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PATT4_ATTSET4_1                ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PATT4_ATTSET4_2                ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PATT4_ATTSET4_3                ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PATT4_ATTSET4_4                ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PATT4_ATTSET4_5                ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PATT4_ATTSET4_6                ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PATT4_ATTSET4_7                ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PATT4_ATTWAIT4                 ((uint32_t)0x0000FF00)        /*!< ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */
+#define  FSMC_PATT4_ATTWAIT4_0               ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PATT4_ATTWAIT4_1               ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PATT4_ATTWAIT4_2               ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PATT4_ATTWAIT4_3               ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PATT4_ATTWAIT4_4               ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PATT4_ATTWAIT4_5               ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PATT4_ATTWAIT4_6               ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PATT4_ATTWAIT4_7               ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PATT4_ATTHOLD4                 ((uint32_t)0x00FF0000)        /*!< ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */
+#define  FSMC_PATT4_ATTHOLD4_0               ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PATT4_ATTHOLD4_1               ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PATT4_ATTHOLD4_2               ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PATT4_ATTHOLD4_3               ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PATT4_ATTHOLD4_4               ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PATT4_ATTHOLD4_5               ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PATT4_ATTHOLD4_6               ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PATT4_ATTHOLD4_7               ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PATT4_ATTHIZ4                  ((uint32_t)0xFF000000)        /*!< ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */
+#define  FSMC_PATT4_ATTHIZ4_0                ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PATT4_ATTHIZ4_1                ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PATT4_ATTHIZ4_2                ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PATT4_ATTHIZ4_3                ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PATT4_ATTHIZ4_4                ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PATT4_ATTHIZ4_5                ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PATT4_ATTHIZ4_6                ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PATT4_ATTHIZ4_7                ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_PIO4 register  *******************/
+#define  FSMC_PIO4_IOSET4                    ((uint32_t)0x000000FF)        /*!< IOSET4[7:0] bits (I/O 4 setup time) */
+#define  FSMC_PIO4_IOSET4_0                  ((uint32_t)0x00000001)        /*!< Bit 0 */
+#define  FSMC_PIO4_IOSET4_1                  ((uint32_t)0x00000002)        /*!< Bit 1 */
+#define  FSMC_PIO4_IOSET4_2                  ((uint32_t)0x00000004)        /*!< Bit 2 */
+#define  FSMC_PIO4_IOSET4_3                  ((uint32_t)0x00000008)        /*!< Bit 3 */
+#define  FSMC_PIO4_IOSET4_4                  ((uint32_t)0x00000010)        /*!< Bit 4 */
+#define  FSMC_PIO4_IOSET4_5                  ((uint32_t)0x00000020)        /*!< Bit 5 */
+#define  FSMC_PIO4_IOSET4_6                  ((uint32_t)0x00000040)        /*!< Bit 6 */
+#define  FSMC_PIO4_IOSET4_7                  ((uint32_t)0x00000080)        /*!< Bit 7 */
+
+#define  FSMC_PIO4_IOWAIT4                   ((uint32_t)0x0000FF00)        /*!< IOWAIT4[7:0] bits (I/O 4 wait time) */
+#define  FSMC_PIO4_IOWAIT4_0                 ((uint32_t)0x00000100)        /*!< Bit 0 */
+#define  FSMC_PIO4_IOWAIT4_1                 ((uint32_t)0x00000200)        /*!< Bit 1 */
+#define  FSMC_PIO4_IOWAIT4_2                 ((uint32_t)0x00000400)        /*!< Bit 2 */
+#define  FSMC_PIO4_IOWAIT4_3                 ((uint32_t)0x00000800)        /*!< Bit 3 */
+#define  FSMC_PIO4_IOWAIT4_4                 ((uint32_t)0x00001000)        /*!< Bit 4 */
+#define  FSMC_PIO4_IOWAIT4_5                 ((uint32_t)0x00002000)        /*!< Bit 5 */
+#define  FSMC_PIO4_IOWAIT4_6                 ((uint32_t)0x00004000)        /*!< Bit 6 */
+#define  FSMC_PIO4_IOWAIT4_7                 ((uint32_t)0x00008000)        /*!< Bit 7 */
+
+#define  FSMC_PIO4_IOHOLD4                   ((uint32_t)0x00FF0000)        /*!< IOHOLD4[7:0] bits (I/O 4 hold time) */
+#define  FSMC_PIO4_IOHOLD4_0                 ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  FSMC_PIO4_IOHOLD4_1                 ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  FSMC_PIO4_IOHOLD4_2                 ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  FSMC_PIO4_IOHOLD4_3                 ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  FSMC_PIO4_IOHOLD4_4                 ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  FSMC_PIO4_IOHOLD4_5                 ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  FSMC_PIO4_IOHOLD4_6                 ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  FSMC_PIO4_IOHOLD4_7                 ((uint32_t)0x00800000)        /*!< Bit 7 */
+
+#define  FSMC_PIO4_IOHIZ4                    ((uint32_t)0xFF000000)        /*!< IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */
+#define  FSMC_PIO4_IOHIZ4_0                  ((uint32_t)0x01000000)        /*!< Bit 0 */
+#define  FSMC_PIO4_IOHIZ4_1                  ((uint32_t)0x02000000)        /*!< Bit 1 */
+#define  FSMC_PIO4_IOHIZ4_2                  ((uint32_t)0x04000000)        /*!< Bit 2 */
+#define  FSMC_PIO4_IOHIZ4_3                  ((uint32_t)0x08000000)        /*!< Bit 3 */
+#define  FSMC_PIO4_IOHIZ4_4                  ((uint32_t)0x10000000)        /*!< Bit 4 */
+#define  FSMC_PIO4_IOHIZ4_5                  ((uint32_t)0x20000000)        /*!< Bit 5 */
+#define  FSMC_PIO4_IOHIZ4_6                  ((uint32_t)0x40000000)        /*!< Bit 6 */
+#define  FSMC_PIO4_IOHIZ4_7                  ((uint32_t)0x80000000)        /*!< Bit 7 */
+
+/******************  Bit definition for FSMC_ECCR2 register  ******************/
+#define  FSMC_ECCR2_ECC2                     ((uint32_t)0xFFFFFFFF)        /*!< ECC result */
+
+/******************  Bit definition for FSMC_ECCR3 register  ******************/
+#define  FSMC_ECCR3_ECC3                     ((uint32_t)0xFFFFFFFF)        /*!< ECC result */
+
+/******************************************************************************/
+/*                                                                            */
+/*                          SD host Interface                                 */
+/*                                                                            */
+/******************************************************************************/
+
+/******************  Bit definition for SDIO_POWER register  ******************/
+#define  SDIO_POWER_PWRCTRL                  ((uint8_t)0x03)               /*!< PWRCTRL[1:0] bits (Power supply control bits) */
+#define  SDIO_POWER_PWRCTRL_0                ((uint8_t)0x01)               /*!< Bit 0 */
+#define  SDIO_POWER_PWRCTRL_1                ((uint8_t)0x02)               /*!< Bit 1 */
+
+/******************  Bit definition for SDIO_CLKCR register  ******************/
+#define  SDIO_CLKCR_CLKDIV                   ((uint16_t)0x00FF)            /*!< Clock divide factor */
+#define  SDIO_CLKCR_CLKEN                    ((uint16_t)0x0100)            /*!< Clock enable bit */
+#define  SDIO_CLKCR_PWRSAV                   ((uint16_t)0x0200)            /*!< Power saving configuration bit */
+#define  SDIO_CLKCR_BYPASS                   ((uint16_t)0x0400)            /*!< Clock divider bypass enable bit */
+
+#define  SDIO_CLKCR_WIDBUS                   ((uint16_t)0x1800)            /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define  SDIO_CLKCR_WIDBUS_0                 ((uint16_t)0x0800)            /*!< Bit 0 */
+#define  SDIO_CLKCR_WIDBUS_1                 ((uint16_t)0x1000)            /*!< Bit 1 */
+
+#define  SDIO_CLKCR_NEGEDGE                  ((uint16_t)0x2000)            /*!< SDIO_CK dephasing selection bit */
+#define  SDIO_CLKCR_HWFC_EN                  ((uint16_t)0x4000)            /*!< HW Flow Control enable */
+
+/*******************  Bit definition for SDIO_ARG register  *******************/
+#define  SDIO_ARG_CMDARG                     ((uint32_t)0xFFFFFFFF)            /*!< Command argument */
+
+/*******************  Bit definition for SDIO_CMD register  *******************/
+#define  SDIO_CMD_CMDINDEX                   ((uint16_t)0x003F)            /*!< Command Index */
+
+#define  SDIO_CMD_WAITRESP                   ((uint16_t)0x00C0)            /*!< WAITRESP[1:0] bits (Wait for response bits) */
+#define  SDIO_CMD_WAITRESP_0                 ((uint16_t)0x0040)            /*!<  Bit 0 */
+#define  SDIO_CMD_WAITRESP_1                 ((uint16_t)0x0080)            /*!<  Bit 1 */
+
+#define  SDIO_CMD_WAITINT                    ((uint16_t)0x0100)            /*!< CPSM Waits for Interrupt Request */
+#define  SDIO_CMD_WAITPEND                   ((uint16_t)0x0200)            /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define  SDIO_CMD_CPSMEN                     ((uint16_t)0x0400)            /*!< Command path state machine (CPSM) Enable bit */
+#define  SDIO_CMD_SDIOSUSPEND                ((uint16_t)0x0800)            /*!< SD I/O suspend command */
+#define  SDIO_CMD_ENCMDCOMPL                 ((uint16_t)0x1000)            /*!< Enable CMD completion */
+#define  SDIO_CMD_NIEN                       ((uint16_t)0x2000)            /*!< Not Interrupt Enable */
+#define  SDIO_CMD_CEATACMD                   ((uint16_t)0x4000)            /*!< CE-ATA command */
+
+/*****************  Bit definition for SDIO_RESPCMD register  *****************/
+#define  SDIO_RESPCMD_RESPCMD                ((uint8_t)0x3F)               /*!< Response command index */
+
+/******************  Bit definition for SDIO_RESP0 register  ******************/
+#define  SDIO_RESP0_CARDSTATUS0              ((uint32_t)0xFFFFFFFF)        /*!< Card Status */
+
+/******************  Bit definition for SDIO_RESP1 register  ******************/
+#define  SDIO_RESP1_CARDSTATUS1              ((uint32_t)0xFFFFFFFF)        /*!< Card Status */
+
+/******************  Bit definition for SDIO_RESP2 register  ******************/
+#define  SDIO_RESP2_CARDSTATUS2              ((uint32_t)0xFFFFFFFF)        /*!< Card Status */
+
+/******************  Bit definition for SDIO_RESP3 register  ******************/
+#define  SDIO_RESP3_CARDSTATUS3              ((uint32_t)0xFFFFFFFF)        /*!< Card Status */
+
+/******************  Bit definition for SDIO_RESP4 register  ******************/
+#define  SDIO_RESP4_CARDSTATUS4              ((uint32_t)0xFFFFFFFF)        /*!< Card Status */
+
+/******************  Bit definition for SDIO_DTIMER register  *****************/
+#define  SDIO_DTIMER_DATATIME                ((uint32_t)0xFFFFFFFF)        /*!< Data timeout period. */
+
+/******************  Bit definition for SDIO_DLEN register  *******************/
+#define  SDIO_DLEN_DATALENGTH                ((uint32_t)0x01FFFFFF)        /*!< Data length value */
+
+/******************  Bit definition for SDIO_DCTRL register  ******************/
+#define  SDIO_DCTRL_DTEN                     ((uint16_t)0x0001)            /*!< Data transfer enabled bit */
+#define  SDIO_DCTRL_DTDIR                    ((uint16_t)0x0002)            /*!< Data transfer direction selection */
+#define  SDIO_DCTRL_DTMODE                   ((uint16_t)0x0004)            /*!< Data transfer mode selection */
+#define  SDIO_DCTRL_DMAEN                    ((uint16_t)0x0008)            /*!< DMA enabled bit */
+
+#define  SDIO_DCTRL_DBLOCKSIZE               ((uint16_t)0x00F0)            /*!< DBLOCKSIZE[3:0] bits (Data block size) */
+#define  SDIO_DCTRL_DBLOCKSIZE_0             ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  SDIO_DCTRL_DBLOCKSIZE_1             ((uint16_t)0x0020)            /*!< Bit 1 */
+#define  SDIO_DCTRL_DBLOCKSIZE_2             ((uint16_t)0x0040)            /*!< Bit 2 */
+#define  SDIO_DCTRL_DBLOCKSIZE_3             ((uint16_t)0x0080)            /*!< Bit 3 */
+
+#define  SDIO_DCTRL_RWSTART                  ((uint16_t)0x0100)            /*!< Read wait start */
+#define  SDIO_DCTRL_RWSTOP                   ((uint16_t)0x0200)            /*!< Read wait stop */
+#define  SDIO_DCTRL_RWMOD                    ((uint16_t)0x0400)            /*!< Read wait mode */
+#define  SDIO_DCTRL_SDIOEN                   ((uint16_t)0x0800)            /*!< SD I/O enable functions */
+
+/******************  Bit definition for SDIO_DCOUNT register  *****************/
+#define  SDIO_DCOUNT_DATACOUNT               ((uint32_t)0x01FFFFFF)        /*!< Data count value */
+
+/******************  Bit definition for SDIO_STA register  ********************/
+#define  SDIO_STA_CCRCFAIL                   ((uint32_t)0x00000001)        /*!< Command response received (CRC check failed) */
+#define  SDIO_STA_DCRCFAIL                   ((uint32_t)0x00000002)        /*!< Data block sent/received (CRC check failed) */
+#define  SDIO_STA_CTIMEOUT                   ((uint32_t)0x00000004)        /*!< Command response timeout */
+#define  SDIO_STA_DTIMEOUT                   ((uint32_t)0x00000008)        /*!< Data timeout */
+#define  SDIO_STA_TXUNDERR                   ((uint32_t)0x00000010)        /*!< Transmit FIFO underrun error */
+#define  SDIO_STA_RXOVERR                    ((uint32_t)0x00000020)        /*!< Received FIFO overrun error */
+#define  SDIO_STA_CMDREND                    ((uint32_t)0x00000040)        /*!< Command response received (CRC check passed) */
+#define  SDIO_STA_CMDSENT                    ((uint32_t)0x00000080)        /*!< Command sent (no response required) */
+#define  SDIO_STA_DATAEND                    ((uint32_t)0x00000100)        /*!< Data end (data counter, SDIDCOUNT, is zero) */
+#define  SDIO_STA_STBITERR                   ((uint32_t)0x00000200)        /*!< Start bit not detected on all data signals in wide bus mode */
+#define  SDIO_STA_DBCKEND                    ((uint32_t)0x00000400)        /*!< Data block sent/received (CRC check passed) */
+#define  SDIO_STA_CMDACT                     ((uint32_t)0x00000800)        /*!< Command transfer in progress */
+#define  SDIO_STA_TXACT                      ((uint32_t)0x00001000)        /*!< Data transmit in progress */
+#define  SDIO_STA_RXACT                      ((uint32_t)0x00002000)        /*!< Data receive in progress */
+#define  SDIO_STA_TXFIFOHE                   ((uint32_t)0x00004000)        /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define  SDIO_STA_RXFIFOHF                   ((uint32_t)0x00008000)        /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define  SDIO_STA_TXFIFOF                    ((uint32_t)0x00010000)        /*!< Transmit FIFO full */
+#define  SDIO_STA_RXFIFOF                    ((uint32_t)0x00020000)        /*!< Receive FIFO full */
+#define  SDIO_STA_TXFIFOE                    ((uint32_t)0x00040000)        /*!< Transmit FIFO empty */
+#define  SDIO_STA_RXFIFOE                    ((uint32_t)0x00080000)        /*!< Receive FIFO empty */
+#define  SDIO_STA_TXDAVL                     ((uint32_t)0x00100000)        /*!< Data available in transmit FIFO */
+#define  SDIO_STA_RXDAVL                     ((uint32_t)0x00200000)        /*!< Data available in receive FIFO */
+#define  SDIO_STA_SDIOIT                     ((uint32_t)0x00400000)        /*!< SDIO interrupt received */
+#define  SDIO_STA_CEATAEND                   ((uint32_t)0x00800000)        /*!< CE-ATA command completion signal received for CMD61 */
+
+/*******************  Bit definition for SDIO_ICR register  *******************/
+#define  SDIO_ICR_CCRCFAILC                  ((uint32_t)0x00000001)        /*!< CCRCFAIL flag clear bit */
+#define  SDIO_ICR_DCRCFAILC                  ((uint32_t)0x00000002)        /*!< DCRCFAIL flag clear bit */
+#define  SDIO_ICR_CTIMEOUTC                  ((uint32_t)0x00000004)        /*!< CTIMEOUT flag clear bit */
+#define  SDIO_ICR_DTIMEOUTC                  ((uint32_t)0x00000008)        /*!< DTIMEOUT flag clear bit */
+#define  SDIO_ICR_TXUNDERRC                  ((uint32_t)0x00000010)        /*!< TXUNDERR flag clear bit */
+#define  SDIO_ICR_RXOVERRC                   ((uint32_t)0x00000020)        /*!< RXOVERR flag clear bit */
+#define  SDIO_ICR_CMDRENDC                   ((uint32_t)0x00000040)        /*!< CMDREND flag clear bit */
+#define  SDIO_ICR_CMDSENTC                   ((uint32_t)0x00000080)        /*!< CMDSENT flag clear bit */
+#define  SDIO_ICR_DATAENDC                   ((uint32_t)0x00000100)        /*!< DATAEND flag clear bit */
+#define  SDIO_ICR_STBITERRC                  ((uint32_t)0x00000200)        /*!< STBITERR flag clear bit */
+#define  SDIO_ICR_DBCKENDC                   ((uint32_t)0x00000400)        /*!< DBCKEND flag clear bit */
+#define  SDIO_ICR_SDIOITC                    ((uint32_t)0x00400000)        /*!< SDIOIT flag clear bit */
+#define  SDIO_ICR_CEATAENDC                  ((uint32_t)0x00800000)        /*!< CEATAEND flag clear bit */
+
+/******************  Bit definition for SDIO_MASK register  *******************/
+#define  SDIO_MASK_CCRCFAILIE                ((uint32_t)0x00000001)        /*!< Command CRC Fail Interrupt Enable */
+#define  SDIO_MASK_DCRCFAILIE                ((uint32_t)0x00000002)        /*!< Data CRC Fail Interrupt Enable */
+#define  SDIO_MASK_CTIMEOUTIE                ((uint32_t)0x00000004)        /*!< Command TimeOut Interrupt Enable */
+#define  SDIO_MASK_DTIMEOUTIE                ((uint32_t)0x00000008)        /*!< Data TimeOut Interrupt Enable */
+#define  SDIO_MASK_TXUNDERRIE                ((uint32_t)0x00000010)        /*!< Tx FIFO UnderRun Error Interrupt Enable */
+#define  SDIO_MASK_RXOVERRIE                 ((uint32_t)0x00000020)        /*!< Rx FIFO OverRun Error Interrupt Enable */
+#define  SDIO_MASK_CMDRENDIE                 ((uint32_t)0x00000040)        /*!< Command Response Received Interrupt Enable */
+#define  SDIO_MASK_CMDSENTIE                 ((uint32_t)0x00000080)        /*!< Command Sent Interrupt Enable */
+#define  SDIO_MASK_DATAENDIE                 ((uint32_t)0x00000100)        /*!< Data End Interrupt Enable */
+#define  SDIO_MASK_STBITERRIE                ((uint32_t)0x00000200)        /*!< Start Bit Error Interrupt Enable */
+#define  SDIO_MASK_DBCKENDIE                 ((uint32_t)0x00000400)        /*!< Data Block End Interrupt Enable */
+#define  SDIO_MASK_CMDACTIE                  ((uint32_t)0x00000800)        /*!< Command Acting Interrupt Enable */
+#define  SDIO_MASK_TXACTIE                   ((uint32_t)0x00001000)        /*!< Data Transmit Acting Interrupt Enable */
+#define  SDIO_MASK_RXACTIE                   ((uint32_t)0x00002000)        /*!< Data receive acting interrupt enabled */
+#define  SDIO_MASK_TXFIFOHEIE                ((uint32_t)0x00004000)        /*!< Tx FIFO Half Empty interrupt Enable */
+#define  SDIO_MASK_RXFIFOHFIE                ((uint32_t)0x00008000)        /*!< Rx FIFO Half Full interrupt Enable */
+#define  SDIO_MASK_TXFIFOFIE                 ((uint32_t)0x00010000)        /*!< Tx FIFO Full interrupt Enable */
+#define  SDIO_MASK_RXFIFOFIE                 ((uint32_t)0x00020000)        /*!< Rx FIFO Full interrupt Enable */
+#define  SDIO_MASK_TXFIFOEIE                 ((uint32_t)0x00040000)        /*!< Tx FIFO Empty interrupt Enable */
+#define  SDIO_MASK_RXFIFOEIE                 ((uint32_t)0x00080000)        /*!< Rx FIFO Empty interrupt Enable */
+#define  SDIO_MASK_TXDAVLIE                  ((uint32_t)0x00100000)        /*!< Data available in Tx FIFO interrupt Enable */
+#define  SDIO_MASK_RXDAVLIE                  ((uint32_t)0x00200000)        /*!< Data available in Rx FIFO interrupt Enable */
+#define  SDIO_MASK_SDIOITIE                  ((uint32_t)0x00400000)        /*!< SDIO Mode Interrupt Received interrupt Enable */
+#define  SDIO_MASK_CEATAENDIE                ((uint32_t)0x00800000)        /*!< CE-ATA command completion signal received Interrupt Enable */
+
+/*****************  Bit definition for SDIO_FIFOCNT register  *****************/
+#define  SDIO_FIFOCNT_FIFOCOUNT              ((uint32_t)0x00FFFFFF)        /*!< Remaining number of words to be written to or read from the FIFO */
+
+/******************  Bit definition for SDIO_FIFO register  *******************/
+#define  SDIO_FIFO_FIFODATA                  ((uint32_t)0xFFFFFFFF)        /*!< Receive and transmit FIFO data */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                   USB Device FS                            */
+/*                                                                            */
+/******************************************************************************/
+
+/*!< Endpoint-specific registers */
+/*******************  Bit definition for USB_EP0R register  *******************/
+#define  USB_EP0R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP0R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP0R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP0R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP0R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP0R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP0R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP0R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP0R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP0R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP0R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP0R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP0R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP0R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP0R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP0R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP1R register  *******************/
+#define  USB_EP1R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP1R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP1R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP1R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP1R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP1R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP1R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP1R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP1R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP1R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP1R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP1R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP1R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP1R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP1R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP1R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP2R register  *******************/
+#define  USB_EP2R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP2R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP2R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP2R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP2R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP2R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP2R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP2R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP2R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP2R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP2R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP2R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP2R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP2R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP2R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP2R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP3R register  *******************/
+#define  USB_EP3R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP3R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP3R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP3R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP3R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP3R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP3R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP3R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP3R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP3R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP3R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP3R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP3R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP3R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP3R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP3R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP4R register  *******************/
+#define  USB_EP4R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP4R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP4R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP4R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP4R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP4R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP4R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP4R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP4R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP4R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP4R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP4R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP4R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP4R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP4R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP4R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP5R register  *******************/
+#define  USB_EP5R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP5R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP5R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP5R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP5R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP5R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP5R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP5R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP5R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP5R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP5R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP5R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP5R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP5R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP5R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP5R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP6R register  *******************/
+#define  USB_EP6R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP6R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP6R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP6R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP6R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP6R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP6R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP6R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP6R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP6R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP6R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP6R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP6R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP6R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP6R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP6R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*******************  Bit definition for USB_EP7R register  *******************/
+#define  USB_EP7R_EA                         ((uint16_t)0x000F)            /*!< Endpoint Address */
+
+#define  USB_EP7R_STAT_TX                    ((uint16_t)0x0030)            /*!< STAT_TX[1:0] bits (Status bits, for transmission transfers) */
+#define  USB_EP7R_STAT_TX_0                  ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  USB_EP7R_STAT_TX_1                  ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  USB_EP7R_DTOG_TX                    ((uint16_t)0x0040)            /*!< Data Toggle, for transmission transfers */
+#define  USB_EP7R_CTR_TX                     ((uint16_t)0x0080)            /*!< Correct Transfer for transmission */
+#define  USB_EP7R_EP_KIND                    ((uint16_t)0x0100)            /*!< Endpoint Kind */
+
+#define  USB_EP7R_EP_TYPE                    ((uint16_t)0x0600)            /*!< EP_TYPE[1:0] bits (Endpoint type) */
+#define  USB_EP7R_EP_TYPE_0                  ((uint16_t)0x0200)            /*!< Bit 0 */
+#define  USB_EP7R_EP_TYPE_1                  ((uint16_t)0x0400)            /*!< Bit 1 */
+
+#define  USB_EP7R_SETUP                      ((uint16_t)0x0800)            /*!< Setup transaction completed */
+
+#define  USB_EP7R_STAT_RX                    ((uint16_t)0x3000)            /*!< STAT_RX[1:0] bits (Status bits, for reception transfers) */
+#define  USB_EP7R_STAT_RX_0                  ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USB_EP7R_STAT_RX_1                  ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USB_EP7R_DTOG_RX                    ((uint16_t)0x4000)            /*!< Data Toggle, for reception transfers */
+#define  USB_EP7R_CTR_RX                     ((uint16_t)0x8000)            /*!< Correct Transfer for reception */
+
+/*!< Common registers */
+/*******************  Bit definition for USB_CNTR register  *******************/
+#define  USB_CNTR_FRES                       ((uint16_t)0x0001)            /*!< Force USB Reset */
+#define  USB_CNTR_PDWN                       ((uint16_t)0x0002)            /*!< Power down */
+#define  USB_CNTR_LP_MODE                    ((uint16_t)0x0004)            /*!< Low-power mode */
+#define  USB_CNTR_FSUSP                      ((uint16_t)0x0008)            /*!< Force suspend */
+#define  USB_CNTR_RESUME                     ((uint16_t)0x0010)            /*!< Resume request */
+#define  USB_CNTR_ESOFM                      ((uint16_t)0x0100)            /*!< Expected Start Of Frame Interrupt Mask */
+#define  USB_CNTR_SOFM                       ((uint16_t)0x0200)            /*!< Start Of Frame Interrupt Mask */
+#define  USB_CNTR_RESETM                     ((uint16_t)0x0400)            /*!< RESET Interrupt Mask */
+#define  USB_CNTR_SUSPM                      ((uint16_t)0x0800)            /*!< Suspend mode Interrupt Mask */
+#define  USB_CNTR_WKUPM                      ((uint16_t)0x1000)            /*!< Wakeup Interrupt Mask */
+#define  USB_CNTR_ERRM                       ((uint16_t)0x2000)            /*!< Error Interrupt Mask */
+#define  USB_CNTR_PMAOVRM                    ((uint16_t)0x4000)            /*!< Packet Memory Area Over / Underrun Interrupt Mask */
+#define  USB_CNTR_CTRM                       ((uint16_t)0x8000)            /*!< Correct Transfer Interrupt Mask */
+
+/*******************  Bit definition for USB_ISTR register  *******************/
+#define  USB_ISTR_EP_ID                      ((uint16_t)0x000F)            /*!< Endpoint Identifier */
+#define  USB_ISTR_DIR                        ((uint16_t)0x0010)            /*!< Direction of transaction */
+#define  USB_ISTR_ESOF                       ((uint16_t)0x0100)            /*!< Expected Start Of Frame */
+#define  USB_ISTR_SOF                        ((uint16_t)0x0200)            /*!< Start Of Frame */
+#define  USB_ISTR_RESET                      ((uint16_t)0x0400)            /*!< USB RESET request */
+#define  USB_ISTR_SUSP                       ((uint16_t)0x0800)            /*!< Suspend mode request */
+#define  USB_ISTR_WKUP                       ((uint16_t)0x1000)            /*!< Wake up */
+#define  USB_ISTR_ERR                        ((uint16_t)0x2000)            /*!< Error */
+#define  USB_ISTR_PMAOVR                     ((uint16_t)0x4000)            /*!< Packet Memory Area Over / Underrun */
+#define  USB_ISTR_CTR                        ((uint16_t)0x8000)            /*!< Correct Transfer */
+
+/*******************  Bit definition for USB_FNR register  ********************/
+#define  USB_FNR_FN                          ((uint16_t)0x07FF)            /*!< Frame Number */
+#define  USB_FNR_LSOF                        ((uint16_t)0x1800)            /*!< Lost SOF */
+#define  USB_FNR_LCK                         ((uint16_t)0x2000)            /*!< Locked */
+#define  USB_FNR_RXDM                        ((uint16_t)0x4000)            /*!< Receive Data - Line Status */
+#define  USB_FNR_RXDP                        ((uint16_t)0x8000)            /*!< Receive Data + Line Status */
+
+/******************  Bit definition for USB_DADDR register  *******************/
+#define  USB_DADDR_ADD                       ((uint8_t)0x7F)               /*!< ADD[6:0] bits (Device Address) */
+#define  USB_DADDR_ADD0                      ((uint8_t)0x01)               /*!< Bit 0 */
+#define  USB_DADDR_ADD1                      ((uint8_t)0x02)               /*!< Bit 1 */
+#define  USB_DADDR_ADD2                      ((uint8_t)0x04)               /*!< Bit 2 */
+#define  USB_DADDR_ADD3                      ((uint8_t)0x08)               /*!< Bit 3 */
+#define  USB_DADDR_ADD4                      ((uint8_t)0x10)               /*!< Bit 4 */
+#define  USB_DADDR_ADD5                      ((uint8_t)0x20)               /*!< Bit 5 */
+#define  USB_DADDR_ADD6                      ((uint8_t)0x40)               /*!< Bit 6 */
+
+#define  USB_DADDR_EF                        ((uint8_t)0x80)               /*!< Enable Function */
+
+/******************  Bit definition for USB_BTABLE register  ******************/    
+#define  USB_BTABLE_BTABLE                   ((uint16_t)0xFFF8)            /*!< Buffer Table */
+
+/*!< Buffer descriptor table */
+/*****************  Bit definition for USB_ADDR0_TX register  *****************/
+#define  USB_ADDR0_TX_ADDR0_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 0 */
+
+/*****************  Bit definition for USB_ADDR1_TX register  *****************/
+#define  USB_ADDR1_TX_ADDR1_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 1 */
+
+/*****************  Bit definition for USB_ADDR2_TX register  *****************/
+#define  USB_ADDR2_TX_ADDR2_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 2 */
+
+/*****************  Bit definition for USB_ADDR3_TX register  *****************/
+#define  USB_ADDR3_TX_ADDR3_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 3 */
+
+/*****************  Bit definition for USB_ADDR4_TX register  *****************/
+#define  USB_ADDR4_TX_ADDR4_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 4 */
+
+/*****************  Bit definition for USB_ADDR5_TX register  *****************/
+#define  USB_ADDR5_TX_ADDR5_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 5 */
+
+/*****************  Bit definition for USB_ADDR6_TX register  *****************/
+#define  USB_ADDR6_TX_ADDR6_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 6 */
+
+/*****************  Bit definition for USB_ADDR7_TX register  *****************/
+#define  USB_ADDR7_TX_ADDR7_TX               ((uint16_t)0xFFFE)            /*!< Transmission Buffer Address 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/*****************  Bit definition for USB_COUNT0_TX register  ****************/
+#define  USB_COUNT0_TX_COUNT0_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 0 */
+
+/*****************  Bit definition for USB_COUNT1_TX register  ****************/
+#define  USB_COUNT1_TX_COUNT1_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 1 */
+
+/*****************  Bit definition for USB_COUNT2_TX register  ****************/
+#define  USB_COUNT2_TX_COUNT2_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 2 */
+
+/*****************  Bit definition for USB_COUNT3_TX register  ****************/
+#define  USB_COUNT3_TX_COUNT3_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 3 */
+
+/*****************  Bit definition for USB_COUNT4_TX register  ****************/
+#define  USB_COUNT4_TX_COUNT4_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 4 */
+
+/*****************  Bit definition for USB_COUNT5_TX register  ****************/
+#define  USB_COUNT5_TX_COUNT5_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 5 */
+
+/*****************  Bit definition for USB_COUNT6_TX register  ****************/
+#define  USB_COUNT6_TX_COUNT6_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 6 */
+
+/*****************  Bit definition for USB_COUNT7_TX register  ****************/
+#define  USB_COUNT7_TX_COUNT7_TX             ((uint16_t)0x03FF)            /*!< Transmission Byte Count 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/****************  Bit definition for USB_COUNT0_TX_0 register  ***************/
+#define  USB_COUNT0_TX_0_COUNT0_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 0 (low) */
+
+/****************  Bit definition for USB_COUNT0_TX_1 register  ***************/
+#define  USB_COUNT0_TX_1_COUNT0_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 0 (high) */
+
+/****************  Bit definition for USB_COUNT1_TX_0 register  ***************/
+#define  USB_COUNT1_TX_0_COUNT1_TX_0          ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 1 (low) */
+
+/****************  Bit definition for USB_COUNT1_TX_1 register  ***************/
+#define  USB_COUNT1_TX_1_COUNT1_TX_1          ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 1 (high) */
+
+/****************  Bit definition for USB_COUNT2_TX_0 register  ***************/
+#define  USB_COUNT2_TX_0_COUNT2_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 2 (low) */
+
+/****************  Bit definition for USB_COUNT2_TX_1 register  ***************/
+#define  USB_COUNT2_TX_1_COUNT2_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 2 (high) */
+
+/****************  Bit definition for USB_COUNT3_TX_0 register  ***************/
+#define  USB_COUNT3_TX_0_COUNT3_TX_0         ((uint16_t)0x000003FF)        /*!< Transmission Byte Count 3 (low) */
+
+/****************  Bit definition for USB_COUNT3_TX_1 register  ***************/
+#define  USB_COUNT3_TX_1_COUNT3_TX_1         ((uint16_t)0x03FF0000)        /*!< Transmission Byte Count 3 (high) */
+
+/****************  Bit definition for USB_COUNT4_TX_0 register  ***************/
+#define  USB_COUNT4_TX_0_COUNT4_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 4 (low) */
+
+/****************  Bit definition for USB_COUNT4_TX_1 register  ***************/
+#define  USB_COUNT4_TX_1_COUNT4_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 4 (high) */
+
+/****************  Bit definition for USB_COUNT5_TX_0 register  ***************/
+#define  USB_COUNT5_TX_0_COUNT5_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 5 (low) */
+
+/****************  Bit definition for USB_COUNT5_TX_1 register  ***************/
+#define  USB_COUNT5_TX_1_COUNT5_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 5 (high) */
+
+/****************  Bit definition for USB_COUNT6_TX_0 register  ***************/
+#define  USB_COUNT6_TX_0_COUNT6_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 6 (low) */
+
+/****************  Bit definition for USB_COUNT6_TX_1 register  ***************/
+#define  USB_COUNT6_TX_1_COUNT6_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 6 (high) */
+
+/****************  Bit definition for USB_COUNT7_TX_0 register  ***************/
+#define  USB_COUNT7_TX_0_COUNT7_TX_0         ((uint32_t)0x000003FF)        /*!< Transmission Byte Count 7 (low) */
+
+/****************  Bit definition for USB_COUNT7_TX_1 register  ***************/
+#define  USB_COUNT7_TX_1_COUNT7_TX_1         ((uint32_t)0x03FF0000)        /*!< Transmission Byte Count 7 (high) */
+
+/*----------------------------------------------------------------------------*/
+
+/*****************  Bit definition for USB_ADDR0_RX register  *****************/
+#define  USB_ADDR0_RX_ADDR0_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 0 */
+
+/*****************  Bit definition for USB_ADDR1_RX register  *****************/
+#define  USB_ADDR1_RX_ADDR1_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 1 */
+
+/*****************  Bit definition for USB_ADDR2_RX register  *****************/
+#define  USB_ADDR2_RX_ADDR2_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 2 */
+
+/*****************  Bit definition for USB_ADDR3_RX register  *****************/
+#define  USB_ADDR3_RX_ADDR3_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 3 */
+
+/*****************  Bit definition for USB_ADDR4_RX register  *****************/
+#define  USB_ADDR4_RX_ADDR4_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 4 */
+
+/*****************  Bit definition for USB_ADDR5_RX register  *****************/
+#define  USB_ADDR5_RX_ADDR5_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 5 */
+
+/*****************  Bit definition for USB_ADDR6_RX register  *****************/
+#define  USB_ADDR6_RX_ADDR6_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 6 */
+
+/*****************  Bit definition for USB_ADDR7_RX register  *****************/
+#define  USB_ADDR7_RX_ADDR7_RX               ((uint16_t)0xFFFE)            /*!< Reception Buffer Address 7 */
+
+/*----------------------------------------------------------------------------*/
+
+/*****************  Bit definition for USB_COUNT0_RX register  ****************/
+#define  USB_COUNT0_RX_COUNT0_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT0_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT0_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT0_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT0_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT0_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT0_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT0_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT1_RX register  ****************/
+#define  USB_COUNT1_RX_COUNT1_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT1_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT1_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT1_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT1_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT1_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT1_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT1_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT2_RX register  ****************/
+#define  USB_COUNT2_RX_COUNT2_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT2_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT2_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT2_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT2_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT2_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT2_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT2_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT3_RX register  ****************/
+#define  USB_COUNT3_RX_COUNT3_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT3_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT3_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT3_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT3_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT3_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT3_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT3_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT4_RX register  ****************/
+#define  USB_COUNT4_RX_COUNT4_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT4_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT4_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT4_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT4_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT4_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT4_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT4_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT5_RX register  ****************/
+#define  USB_COUNT5_RX_COUNT5_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT5_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT5_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT5_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT5_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT5_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT5_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT5_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT6_RX register  ****************/
+#define  USB_COUNT6_RX_COUNT6_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT6_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT6_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT6_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT6_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT6_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT6_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT6_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*****************  Bit definition for USB_COUNT7_RX register  ****************/
+#define  USB_COUNT7_RX_COUNT7_RX             ((uint16_t)0x03FF)            /*!< Reception Byte Count */
+
+#define  USB_COUNT7_RX_NUM_BLOCK             ((uint16_t)0x7C00)            /*!< NUM_BLOCK[4:0] bits (Number of blocks) */
+#define  USB_COUNT7_RX_NUM_BLOCK_0           ((uint16_t)0x0400)            /*!< Bit 0 */
+#define  USB_COUNT7_RX_NUM_BLOCK_1           ((uint16_t)0x0800)            /*!< Bit 1 */
+#define  USB_COUNT7_RX_NUM_BLOCK_2           ((uint16_t)0x1000)            /*!< Bit 2 */
+#define  USB_COUNT7_RX_NUM_BLOCK_3           ((uint16_t)0x2000)            /*!< Bit 3 */
+#define  USB_COUNT7_RX_NUM_BLOCK_4           ((uint16_t)0x4000)            /*!< Bit 4 */
+
+#define  USB_COUNT7_RX_BLSIZE                ((uint16_t)0x8000)            /*!< BLock SIZE */
+
+/*----------------------------------------------------------------------------*/
+
+/****************  Bit definition for USB_COUNT0_RX_0 register  ***************/
+#define  USB_COUNT0_RX_0_COUNT0_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT0_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT0_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT0_RX_1 register  ***************/
+#define  USB_COUNT0_RX_1_COUNT0_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 1 */
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT0_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT0_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/****************  Bit definition for USB_COUNT1_RX_0 register  ***************/
+#define  USB_COUNT1_RX_0_COUNT1_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT1_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT1_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT1_RX_1 register  ***************/
+#define  USB_COUNT1_RX_1_COUNT1_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT1_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT1_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/****************  Bit definition for USB_COUNT2_RX_0 register  ***************/
+#define  USB_COUNT2_RX_0_COUNT2_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT2_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT2_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT2_RX_1 register  ***************/
+#define  USB_COUNT2_RX_1_COUNT2_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT2_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT2_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/****************  Bit definition for USB_COUNT3_RX_0 register  ***************/
+#define  USB_COUNT3_RX_0_COUNT3_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT3_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT3_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT3_RX_1 register  ***************/
+#define  USB_COUNT3_RX_1_COUNT3_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT3_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT3_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/****************  Bit definition for USB_COUNT4_RX_0 register  ***************/
+#define  USB_COUNT4_RX_0_COUNT4_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0_0      ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0_1      ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0_2      ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0_3      ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT4_RX_0_NUM_BLOCK_0_4      ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT4_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT4_RX_1 register  ***************/
+#define  USB_COUNT4_RX_1_COUNT4_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT4_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT4_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/****************  Bit definition for USB_COUNT5_RX_0 register  ***************/
+#define  USB_COUNT5_RX_0_COUNT5_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT5_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT5_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT5_RX_1 register  ***************/
+#define  USB_COUNT5_RX_1_COUNT5_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT5_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT5_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/***************  Bit definition for USB_COUNT6_RX_0  register  ***************/
+#define  USB_COUNT6_RX_0_COUNT6_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT6_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT6_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/****************  Bit definition for USB_COUNT6_RX_1 register  ***************/
+#define  USB_COUNT6_RX_1_COUNT6_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT6_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT6_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/***************  Bit definition for USB_COUNT7_RX_0 register  ****************/
+#define  USB_COUNT7_RX_0_COUNT7_RX_0         ((uint32_t)0x000003FF)        /*!< Reception Byte Count (low) */
+
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0         ((uint32_t)0x00007C00)        /*!< NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0_0       ((uint32_t)0x00000400)        /*!< Bit 0 */
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0_1       ((uint32_t)0x00000800)        /*!< Bit 1 */
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0_2       ((uint32_t)0x00001000)        /*!< Bit 2 */
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0_3       ((uint32_t)0x00002000)        /*!< Bit 3 */
+#define  USB_COUNT7_RX_0_NUM_BLOCK_0_4       ((uint32_t)0x00004000)        /*!< Bit 4 */
+
+#define  USB_COUNT7_RX_0_BLSIZE_0            ((uint32_t)0x00008000)        /*!< BLock SIZE (low) */
+
+/***************  Bit definition for USB_COUNT7_RX_1 register  ****************/
+#define  USB_COUNT7_RX_1_COUNT7_RX_1         ((uint32_t)0x03FF0000)        /*!< Reception Byte Count (high) */
+
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1         ((uint32_t)0x7C000000)        /*!< NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1_0       ((uint32_t)0x04000000)        /*!< Bit 0 */
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1_1       ((uint32_t)0x08000000)        /*!< Bit 1 */
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1_2       ((uint32_t)0x10000000)        /*!< Bit 2 */
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1_3       ((uint32_t)0x20000000)        /*!< Bit 3 */
+#define  USB_COUNT7_RX_1_NUM_BLOCK_1_4       ((uint32_t)0x40000000)        /*!< Bit 4 */
+
+#define  USB_COUNT7_RX_1_BLSIZE_1            ((uint32_t)0x80000000)        /*!< BLock SIZE (high) */
+
+/******************************************************************************/
+/*                                                                            */
+/*                         Controller Area Network                            */
+/*                                                                            */
+/******************************************************************************/
+
+/*!< CAN control and status registers */
+/*******************  Bit definition for CAN_MCR register  ********************/
+#define  CAN_MCR_INRQ                        ((uint16_t)0x0001)            /*!< Initialization Request */
+#define  CAN_MCR_SLEEP                       ((uint16_t)0x0002)            /*!< Sleep Mode Request */
+#define  CAN_MCR_TXFP                        ((uint16_t)0x0004)            /*!< Transmit FIFO Priority */
+#define  CAN_MCR_RFLM                        ((uint16_t)0x0008)            /*!< Receive FIFO Locked Mode */
+#define  CAN_MCR_NART                        ((uint16_t)0x0010)            /*!< No Automatic Retransmission */
+#define  CAN_MCR_AWUM                        ((uint16_t)0x0020)            /*!< Automatic Wakeup Mode */
+#define  CAN_MCR_ABOM                        ((uint16_t)0x0040)            /*!< Automatic Bus-Off Management */
+#define  CAN_MCR_TTCM                        ((uint16_t)0x0080)            /*!< Time Triggered Communication Mode */
+#define  CAN_MCR_RESET                       ((uint16_t)0x8000)            /*!< CAN software master reset */
+
+/*******************  Bit definition for CAN_MSR register  ********************/
+#define  CAN_MSR_INAK                        ((uint16_t)0x0001)            /*!< Initialization Acknowledge */
+#define  CAN_MSR_SLAK                        ((uint16_t)0x0002)            /*!< Sleep Acknowledge */
+#define  CAN_MSR_ERRI                        ((uint16_t)0x0004)            /*!< Error Interrupt */
+#define  CAN_MSR_WKUI                        ((uint16_t)0x0008)            /*!< Wakeup Interrupt */
+#define  CAN_MSR_SLAKI                       ((uint16_t)0x0010)            /*!< Sleep Acknowledge Interrupt */
+#define  CAN_MSR_TXM                         ((uint16_t)0x0100)            /*!< Transmit Mode */
+#define  CAN_MSR_RXM                         ((uint16_t)0x0200)            /*!< Receive Mode */
+#define  CAN_MSR_SAMP                        ((uint16_t)0x0400)            /*!< Last Sample Point */
+#define  CAN_MSR_RX                          ((uint16_t)0x0800)            /*!< CAN Rx Signal */
+
+/*******************  Bit definition for CAN_TSR register  ********************/
+#define  CAN_TSR_RQCP0                       ((uint32_t)0x00000001)        /*!< Request Completed Mailbox0 */
+#define  CAN_TSR_TXOK0                       ((uint32_t)0x00000002)        /*!< Transmission OK of Mailbox0 */
+#define  CAN_TSR_ALST0                       ((uint32_t)0x00000004)        /*!< Arbitration Lost for Mailbox0 */
+#define  CAN_TSR_TERR0                       ((uint32_t)0x00000008)        /*!< Transmission Error of Mailbox0 */
+#define  CAN_TSR_ABRQ0                       ((uint32_t)0x00000080)        /*!< Abort Request for Mailbox0 */
+#define  CAN_TSR_RQCP1                       ((uint32_t)0x00000100)        /*!< Request Completed Mailbox1 */
+#define  CAN_TSR_TXOK1                       ((uint32_t)0x00000200)        /*!< Transmission OK of Mailbox1 */
+#define  CAN_TSR_ALST1                       ((uint32_t)0x00000400)        /*!< Arbitration Lost for Mailbox1 */
+#define  CAN_TSR_TERR1                       ((uint32_t)0x00000800)        /*!< Transmission Error of Mailbox1 */
+#define  CAN_TSR_ABRQ1                       ((uint32_t)0x00008000)        /*!< Abort Request for Mailbox 1 */
+#define  CAN_TSR_RQCP2                       ((uint32_t)0x00010000)        /*!< Request Completed Mailbox2 */
+#define  CAN_TSR_TXOK2                       ((uint32_t)0x00020000)        /*!< Transmission OK of Mailbox 2 */
+#define  CAN_TSR_ALST2                       ((uint32_t)0x00040000)        /*!< Arbitration Lost for mailbox 2 */
+#define  CAN_TSR_TERR2                       ((uint32_t)0x00080000)        /*!< Transmission Error of Mailbox 2 */
+#define  CAN_TSR_ABRQ2                       ((uint32_t)0x00800000)        /*!< Abort Request for Mailbox 2 */
+#define  CAN_TSR_CODE                        ((uint32_t)0x03000000)        /*!< Mailbox Code */
+
+#define  CAN_TSR_TME                         ((uint32_t)0x1C000000)        /*!< TME[2:0] bits */
+#define  CAN_TSR_TME0                        ((uint32_t)0x04000000)        /*!< Transmit Mailbox 0 Empty */
+#define  CAN_TSR_TME1                        ((uint32_t)0x08000000)        /*!< Transmit Mailbox 1 Empty */
+#define  CAN_TSR_TME2                        ((uint32_t)0x10000000)        /*!< Transmit Mailbox 2 Empty */
+
+#define  CAN_TSR_LOW                         ((uint32_t)0xE0000000)        /*!< LOW[2:0] bits */
+#define  CAN_TSR_LOW0                        ((uint32_t)0x20000000)        /*!< Lowest Priority Flag for Mailbox 0 */
+#define  CAN_TSR_LOW1                        ((uint32_t)0x40000000)        /*!< Lowest Priority Flag for Mailbox 1 */
+#define  CAN_TSR_LOW2                        ((uint32_t)0x80000000)        /*!< Lowest Priority Flag for Mailbox 2 */
+
+/*******************  Bit definition for CAN_RF0R register  *******************/
+#define  CAN_RF0R_FMP0                       ((uint8_t)0x03)               /*!< FIFO 0 Message Pending */
+#define  CAN_RF0R_FULL0                      ((uint8_t)0x08)               /*!< FIFO 0 Full */
+#define  CAN_RF0R_FOVR0                      ((uint8_t)0x10)               /*!< FIFO 0 Overrun */
+#define  CAN_RF0R_RFOM0                      ((uint8_t)0x20)               /*!< Release FIFO 0 Output Mailbox */
+
+/*******************  Bit definition for CAN_RF1R register  *******************/
+#define  CAN_RF1R_FMP1                       ((uint8_t)0x03)               /*!< FIFO 1 Message Pending */
+#define  CAN_RF1R_FULL1                      ((uint8_t)0x08)               /*!< FIFO 1 Full */
+#define  CAN_RF1R_FOVR1                      ((uint8_t)0x10)               /*!< FIFO 1 Overrun */
+#define  CAN_RF1R_RFOM1                      ((uint8_t)0x20)               /*!< Release FIFO 1 Output Mailbox */
+
+/********************  Bit definition for CAN_IER register  *******************/
+#define  CAN_IER_TMEIE                       ((uint32_t)0x00000001)        /*!< Transmit Mailbox Empty Interrupt Enable */
+#define  CAN_IER_FMPIE0                      ((uint32_t)0x00000002)        /*!< FIFO Message Pending Interrupt Enable */
+#define  CAN_IER_FFIE0                       ((uint32_t)0x00000004)        /*!< FIFO Full Interrupt Enable */
+#define  CAN_IER_FOVIE0                      ((uint32_t)0x00000008)        /*!< FIFO Overrun Interrupt Enable */
+#define  CAN_IER_FMPIE1                      ((uint32_t)0x00000010)        /*!< FIFO Message Pending Interrupt Enable */
+#define  CAN_IER_FFIE1                       ((uint32_t)0x00000020)        /*!< FIFO Full Interrupt Enable */
+#define  CAN_IER_FOVIE1                      ((uint32_t)0x00000040)        /*!< FIFO Overrun Interrupt Enable */
+#define  CAN_IER_EWGIE                       ((uint32_t)0x00000100)        /*!< Error Warning Interrupt Enable */
+#define  CAN_IER_EPVIE                       ((uint32_t)0x00000200)        /*!< Error Passive Interrupt Enable */
+#define  CAN_IER_BOFIE                       ((uint32_t)0x00000400)        /*!< Bus-Off Interrupt Enable */
+#define  CAN_IER_LECIE                       ((uint32_t)0x00000800)        /*!< Last Error Code Interrupt Enable */
+#define  CAN_IER_ERRIE                       ((uint32_t)0x00008000)        /*!< Error Interrupt Enable */
+#define  CAN_IER_WKUIE                       ((uint32_t)0x00010000)        /*!< Wakeup Interrupt Enable */
+#define  CAN_IER_SLKIE                       ((uint32_t)0x00020000)        /*!< Sleep Interrupt Enable */
+
+/********************  Bit definition for CAN_ESR register  *******************/
+#define  CAN_ESR_EWGF                        ((uint32_t)0x00000001)        /*!< Error Warning Flag */
+#define  CAN_ESR_EPVF                        ((uint32_t)0x00000002)        /*!< Error Passive Flag */
+#define  CAN_ESR_BOFF                        ((uint32_t)0x00000004)        /*!< Bus-Off Flag */
+
+#define  CAN_ESR_LEC                         ((uint32_t)0x00000070)        /*!< LEC[2:0] bits (Last Error Code) */
+#define  CAN_ESR_LEC_0                       ((uint32_t)0x00000010)        /*!< Bit 0 */
+#define  CAN_ESR_LEC_1                       ((uint32_t)0x00000020)        /*!< Bit 1 */
+#define  CAN_ESR_LEC_2                       ((uint32_t)0x00000040)        /*!< Bit 2 */
+
+#define  CAN_ESR_TEC                         ((uint32_t)0x00FF0000)        /*!< Least significant byte of the 9-bit Transmit Error Counter */
+#define  CAN_ESR_REC                         ((uint32_t)0xFF000000)        /*!< Receive Error Counter */
+
+/*******************  Bit definition for CAN_BTR register  ********************/
+#define  CAN_BTR_BRP                         ((uint32_t)0x000003FF)        /*!< Baud Rate Prescaler */
+#define  CAN_BTR_TS1                         ((uint32_t)0x000F0000)        /*!< Time Segment 1 */
+#define  CAN_BTR_TS2                         ((uint32_t)0x00700000)        /*!< Time Segment 2 */
+#define  CAN_BTR_SJW                         ((uint32_t)0x03000000)        /*!< Resynchronization Jump Width */
+#define  CAN_BTR_LBKM                        ((uint32_t)0x40000000)        /*!< Loop Back Mode (Debug) */
+#define  CAN_BTR_SILM                        ((uint32_t)0x80000000)        /*!< Silent Mode */
+
+/*!< Mailbox registers */
+/******************  Bit definition for CAN_TI0R register  ********************/
+#define  CAN_TI0R_TXRQ                       ((uint32_t)0x00000001)        /*!< Transmit Mailbox Request */
+#define  CAN_TI0R_RTR                        ((uint32_t)0x00000002)        /*!< Remote Transmission Request */
+#define  CAN_TI0R_IDE                        ((uint32_t)0x00000004)        /*!< Identifier Extension */
+#define  CAN_TI0R_EXID                       ((uint32_t)0x001FFFF8)        /*!< Extended Identifier */
+#define  CAN_TI0R_STID                       ((uint32_t)0xFFE00000)        /*!< Standard Identifier or Extended Identifier */
+
+/******************  Bit definition for CAN_TDT0R register  *******************/
+#define  CAN_TDT0R_DLC                       ((uint32_t)0x0000000F)        /*!< Data Length Code */
+#define  CAN_TDT0R_TGT                       ((uint32_t)0x00000100)        /*!< Transmit Global Time */
+#define  CAN_TDT0R_TIME                      ((uint32_t)0xFFFF0000)        /*!< Message Time Stamp */
+
+/******************  Bit definition for CAN_TDL0R register  *******************/
+#define  CAN_TDL0R_DATA0                     ((uint32_t)0x000000FF)        /*!< Data byte 0 */
+#define  CAN_TDL0R_DATA1                     ((uint32_t)0x0000FF00)        /*!< Data byte 1 */
+#define  CAN_TDL0R_DATA2                     ((uint32_t)0x00FF0000)        /*!< Data byte 2 */
+#define  CAN_TDL0R_DATA3                     ((uint32_t)0xFF000000)        /*!< Data byte 3 */
+
+/******************  Bit definition for CAN_TDH0R register  *******************/
+#define  CAN_TDH0R_DATA4                     ((uint32_t)0x000000FF)        /*!< Data byte 4 */
+#define  CAN_TDH0R_DATA5                     ((uint32_t)0x0000FF00)        /*!< Data byte 5 */
+#define  CAN_TDH0R_DATA6                     ((uint32_t)0x00FF0000)        /*!< Data byte 6 */
+#define  CAN_TDH0R_DATA7                     ((uint32_t)0xFF000000)        /*!< Data byte 7 */
+
+/*******************  Bit definition for CAN_TI1R register  *******************/
+#define  CAN_TI1R_TXRQ                       ((uint32_t)0x00000001)        /*!< Transmit Mailbox Request */
+#define  CAN_TI1R_RTR                        ((uint32_t)0x00000002)        /*!< Remote Transmission Request */
+#define  CAN_TI1R_IDE                        ((uint32_t)0x00000004)        /*!< Identifier Extension */
+#define  CAN_TI1R_EXID                       ((uint32_t)0x001FFFF8)        /*!< Extended Identifier */
+#define  CAN_TI1R_STID                       ((uint32_t)0xFFE00000)        /*!< Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_TDT1R register  ******************/
+#define  CAN_TDT1R_DLC                       ((uint32_t)0x0000000F)        /*!< Data Length Code */
+#define  CAN_TDT1R_TGT                       ((uint32_t)0x00000100)        /*!< Transmit Global Time */
+#define  CAN_TDT1R_TIME                      ((uint32_t)0xFFFF0000)        /*!< Message Time Stamp */
+
+/*******************  Bit definition for CAN_TDL1R register  ******************/
+#define  CAN_TDL1R_DATA0                     ((uint32_t)0x000000FF)        /*!< Data byte 0 */
+#define  CAN_TDL1R_DATA1                     ((uint32_t)0x0000FF00)        /*!< Data byte 1 */
+#define  CAN_TDL1R_DATA2                     ((uint32_t)0x00FF0000)        /*!< Data byte 2 */
+#define  CAN_TDL1R_DATA3                     ((uint32_t)0xFF000000)        /*!< Data byte 3 */
+
+/*******************  Bit definition for CAN_TDH1R register  ******************/
+#define  CAN_TDH1R_DATA4                     ((uint32_t)0x000000FF)        /*!< Data byte 4 */
+#define  CAN_TDH1R_DATA5                     ((uint32_t)0x0000FF00)        /*!< Data byte 5 */
+#define  CAN_TDH1R_DATA6                     ((uint32_t)0x00FF0000)        /*!< Data byte 6 */
+#define  CAN_TDH1R_DATA7                     ((uint32_t)0xFF000000)        /*!< Data byte 7 */
+
+/*******************  Bit definition for CAN_TI2R register  *******************/
+#define  CAN_TI2R_TXRQ                       ((uint32_t)0x00000001)        /*!< Transmit Mailbox Request */
+#define  CAN_TI2R_RTR                        ((uint32_t)0x00000002)        /*!< Remote Transmission Request */
+#define  CAN_TI2R_IDE                        ((uint32_t)0x00000004)        /*!< Identifier Extension */
+#define  CAN_TI2R_EXID                       ((uint32_t)0x001FFFF8)        /*!< Extended identifier */
+#define  CAN_TI2R_STID                       ((uint32_t)0xFFE00000)        /*!< Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_TDT2R register  ******************/  
+#define  CAN_TDT2R_DLC                       ((uint32_t)0x0000000F)        /*!< Data Length Code */
+#define  CAN_TDT2R_TGT                       ((uint32_t)0x00000100)        /*!< Transmit Global Time */
+#define  CAN_TDT2R_TIME                      ((uint32_t)0xFFFF0000)        /*!< Message Time Stamp */
+
+/*******************  Bit definition for CAN_TDL2R register  ******************/
+#define  CAN_TDL2R_DATA0                     ((uint32_t)0x000000FF)        /*!< Data byte 0 */
+#define  CAN_TDL2R_DATA1                     ((uint32_t)0x0000FF00)        /*!< Data byte 1 */
+#define  CAN_TDL2R_DATA2                     ((uint32_t)0x00FF0000)        /*!< Data byte 2 */
+#define  CAN_TDL2R_DATA3                     ((uint32_t)0xFF000000)        /*!< Data byte 3 */
+
+/*******************  Bit definition for CAN_TDH2R register  ******************/
+#define  CAN_TDH2R_DATA4                     ((uint32_t)0x000000FF)        /*!< Data byte 4 */
+#define  CAN_TDH2R_DATA5                     ((uint32_t)0x0000FF00)        /*!< Data byte 5 */
+#define  CAN_TDH2R_DATA6                     ((uint32_t)0x00FF0000)        /*!< Data byte 6 */
+#define  CAN_TDH2R_DATA7                     ((uint32_t)0xFF000000)        /*!< Data byte 7 */
+
+/*******************  Bit definition for CAN_RI0R register  *******************/
+#define  CAN_RI0R_RTR                        ((uint32_t)0x00000002)        /*!< Remote Transmission Request */
+#define  CAN_RI0R_IDE                        ((uint32_t)0x00000004)        /*!< Identifier Extension */
+#define  CAN_RI0R_EXID                       ((uint32_t)0x001FFFF8)        /*!< Extended Identifier */
+#define  CAN_RI0R_STID                       ((uint32_t)0xFFE00000)        /*!< Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_RDT0R register  ******************/
+#define  CAN_RDT0R_DLC                       ((uint32_t)0x0000000F)        /*!< Data Length Code */
+#define  CAN_RDT0R_FMI                       ((uint32_t)0x0000FF00)        /*!< Filter Match Index */
+#define  CAN_RDT0R_TIME                      ((uint32_t)0xFFFF0000)        /*!< Message Time Stamp */
+
+/*******************  Bit definition for CAN_RDL0R register  ******************/
+#define  CAN_RDL0R_DATA0                     ((uint32_t)0x000000FF)        /*!< Data byte 0 */
+#define  CAN_RDL0R_DATA1                     ((uint32_t)0x0000FF00)        /*!< Data byte 1 */
+#define  CAN_RDL0R_DATA2                     ((uint32_t)0x00FF0000)        /*!< Data byte 2 */
+#define  CAN_RDL0R_DATA3                     ((uint32_t)0xFF000000)        /*!< Data byte 3 */
+
+/*******************  Bit definition for CAN_RDH0R register  ******************/
+#define  CAN_RDH0R_DATA4                     ((uint32_t)0x000000FF)        /*!< Data byte 4 */
+#define  CAN_RDH0R_DATA5                     ((uint32_t)0x0000FF00)        /*!< Data byte 5 */
+#define  CAN_RDH0R_DATA6                     ((uint32_t)0x00FF0000)        /*!< Data byte 6 */
+#define  CAN_RDH0R_DATA7                     ((uint32_t)0xFF000000)        /*!< Data byte 7 */
+
+/*******************  Bit definition for CAN_RI1R register  *******************/
+#define  CAN_RI1R_RTR                        ((uint32_t)0x00000002)        /*!< Remote Transmission Request */
+#define  CAN_RI1R_IDE                        ((uint32_t)0x00000004)        /*!< Identifier Extension */
+#define  CAN_RI1R_EXID                       ((uint32_t)0x001FFFF8)        /*!< Extended identifier */
+#define  CAN_RI1R_STID                       ((uint32_t)0xFFE00000)        /*!< Standard Identifier or Extended Identifier */
+
+/*******************  Bit definition for CAN_RDT1R register  ******************/
+#define  CAN_RDT1R_DLC                       ((uint32_t)0x0000000F)        /*!< Data Length Code */
+#define  CAN_RDT1R_FMI                       ((uint32_t)0x0000FF00)        /*!< Filter Match Index */
+#define  CAN_RDT1R_TIME                      ((uint32_t)0xFFFF0000)        /*!< Message Time Stamp */
+
+/*******************  Bit definition for CAN_RDL1R register  ******************/
+#define  CAN_RDL1R_DATA0                     ((uint32_t)0x000000FF)        /*!< Data byte 0 */
+#define  CAN_RDL1R_DATA1                     ((uint32_t)0x0000FF00)        /*!< Data byte 1 */
+#define  CAN_RDL1R_DATA2                     ((uint32_t)0x00FF0000)        /*!< Data byte 2 */
+#define  CAN_RDL1R_DATA3                     ((uint32_t)0xFF000000)        /*!< Data byte 3 */
+
+/*******************  Bit definition for CAN_RDH1R register  ******************/
+#define  CAN_RDH1R_DATA4                     ((uint32_t)0x000000FF)        /*!< Data byte 4 */
+#define  CAN_RDH1R_DATA5                     ((uint32_t)0x0000FF00)        /*!< Data byte 5 */
+#define  CAN_RDH1R_DATA6                     ((uint32_t)0x00FF0000)        /*!< Data byte 6 */
+#define  CAN_RDH1R_DATA7                     ((uint32_t)0xFF000000)        /*!< Data byte 7 */
+
+/*!< CAN filter registers */
+/*******************  Bit definition for CAN_FMR register  ********************/
+#define  CAN_FMR_FINIT                       ((uint8_t)0x01)               /*!< Filter Init Mode */
+
+/*******************  Bit definition for CAN_FM1R register  *******************/
+#define  CAN_FM1R_FBM                        ((uint16_t)0x3FFF)            /*!< Filter Mode */
+#define  CAN_FM1R_FBM0                       ((uint16_t)0x0001)            /*!< Filter Init Mode bit 0 */
+#define  CAN_FM1R_FBM1                       ((uint16_t)0x0002)            /*!< Filter Init Mode bit 1 */
+#define  CAN_FM1R_FBM2                       ((uint16_t)0x0004)            /*!< Filter Init Mode bit 2 */
+#define  CAN_FM1R_FBM3                       ((uint16_t)0x0008)            /*!< Filter Init Mode bit 3 */
+#define  CAN_FM1R_FBM4                       ((uint16_t)0x0010)            /*!< Filter Init Mode bit 4 */
+#define  CAN_FM1R_FBM5                       ((uint16_t)0x0020)            /*!< Filter Init Mode bit 5 */
+#define  CAN_FM1R_FBM6                       ((uint16_t)0x0040)            /*!< Filter Init Mode bit 6 */
+#define  CAN_FM1R_FBM7                       ((uint16_t)0x0080)            /*!< Filter Init Mode bit 7 */
+#define  CAN_FM1R_FBM8                       ((uint16_t)0x0100)            /*!< Filter Init Mode bit 8 */
+#define  CAN_FM1R_FBM9                       ((uint16_t)0x0200)            /*!< Filter Init Mode bit 9 */
+#define  CAN_FM1R_FBM10                      ((uint16_t)0x0400)            /*!< Filter Init Mode bit 10 */
+#define  CAN_FM1R_FBM11                      ((uint16_t)0x0800)            /*!< Filter Init Mode bit 11 */
+#define  CAN_FM1R_FBM12                      ((uint16_t)0x1000)            /*!< Filter Init Mode bit 12 */
+#define  CAN_FM1R_FBM13                      ((uint16_t)0x2000)            /*!< Filter Init Mode bit 13 */
+
+/*******************  Bit definition for CAN_FS1R register  *******************/
+#define  CAN_FS1R_FSC                        ((uint16_t)0x3FFF)            /*!< Filter Scale Configuration */
+#define  CAN_FS1R_FSC0                       ((uint16_t)0x0001)            /*!< Filter Scale Configuration bit 0 */
+#define  CAN_FS1R_FSC1                       ((uint16_t)0x0002)            /*!< Filter Scale Configuration bit 1 */
+#define  CAN_FS1R_FSC2                       ((uint16_t)0x0004)            /*!< Filter Scale Configuration bit 2 */
+#define  CAN_FS1R_FSC3                       ((uint16_t)0x0008)            /*!< Filter Scale Configuration bit 3 */
+#define  CAN_FS1R_FSC4                       ((uint16_t)0x0010)            /*!< Filter Scale Configuration bit 4 */
+#define  CAN_FS1R_FSC5                       ((uint16_t)0x0020)            /*!< Filter Scale Configuration bit 5 */
+#define  CAN_FS1R_FSC6                       ((uint16_t)0x0040)            /*!< Filter Scale Configuration bit 6 */
+#define  CAN_FS1R_FSC7                       ((uint16_t)0x0080)            /*!< Filter Scale Configuration bit 7 */
+#define  CAN_FS1R_FSC8                       ((uint16_t)0x0100)            /*!< Filter Scale Configuration bit 8 */
+#define  CAN_FS1R_FSC9                       ((uint16_t)0x0200)            /*!< Filter Scale Configuration bit 9 */
+#define  CAN_FS1R_FSC10                      ((uint16_t)0x0400)            /*!< Filter Scale Configuration bit 10 */
+#define  CAN_FS1R_FSC11                      ((uint16_t)0x0800)            /*!< Filter Scale Configuration bit 11 */
+#define  CAN_FS1R_FSC12                      ((uint16_t)0x1000)            /*!< Filter Scale Configuration bit 12 */
+#define  CAN_FS1R_FSC13                      ((uint16_t)0x2000)            /*!< Filter Scale Configuration bit 13 */
+
+/******************  Bit definition for CAN_FFA1R register  *******************/
+#define  CAN_FFA1R_FFA                       ((uint16_t)0x3FFF)            /*!< Filter FIFO Assignment */
+#define  CAN_FFA1R_FFA0                      ((uint16_t)0x0001)            /*!< Filter FIFO Assignment for Filter 0 */
+#define  CAN_FFA1R_FFA1                      ((uint16_t)0x0002)            /*!< Filter FIFO Assignment for Filter 1 */
+#define  CAN_FFA1R_FFA2                      ((uint16_t)0x0004)            /*!< Filter FIFO Assignment for Filter 2 */
+#define  CAN_FFA1R_FFA3                      ((uint16_t)0x0008)            /*!< Filter FIFO Assignment for Filter 3 */
+#define  CAN_FFA1R_FFA4                      ((uint16_t)0x0010)            /*!< Filter FIFO Assignment for Filter 4 */
+#define  CAN_FFA1R_FFA5                      ((uint16_t)0x0020)            /*!< Filter FIFO Assignment for Filter 5 */
+#define  CAN_FFA1R_FFA6                      ((uint16_t)0x0040)            /*!< Filter FIFO Assignment for Filter 6 */
+#define  CAN_FFA1R_FFA7                      ((uint16_t)0x0080)            /*!< Filter FIFO Assignment for Filter 7 */
+#define  CAN_FFA1R_FFA8                      ((uint16_t)0x0100)            /*!< Filter FIFO Assignment for Filter 8 */
+#define  CAN_FFA1R_FFA9                      ((uint16_t)0x0200)            /*!< Filter FIFO Assignment for Filter 9 */
+#define  CAN_FFA1R_FFA10                     ((uint16_t)0x0400)            /*!< Filter FIFO Assignment for Filter 10 */
+#define  CAN_FFA1R_FFA11                     ((uint16_t)0x0800)            /*!< Filter FIFO Assignment for Filter 11 */
+#define  CAN_FFA1R_FFA12                     ((uint16_t)0x1000)            /*!< Filter FIFO Assignment for Filter 12 */
+#define  CAN_FFA1R_FFA13                     ((uint16_t)0x2000)            /*!< Filter FIFO Assignment for Filter 13 */
+
+/*******************  Bit definition for CAN_FA1R register  *******************/
+#define  CAN_FA1R_FACT                       ((uint16_t)0x3FFF)            /*!< Filter Active */
+#define  CAN_FA1R_FACT0                      ((uint16_t)0x0001)            /*!< Filter 0 Active */
+#define  CAN_FA1R_FACT1                      ((uint16_t)0x0002)            /*!< Filter 1 Active */
+#define  CAN_FA1R_FACT2                      ((uint16_t)0x0004)            /*!< Filter 2 Active */
+#define  CAN_FA1R_FACT3                      ((uint16_t)0x0008)            /*!< Filter 3 Active */
+#define  CAN_FA1R_FACT4                      ((uint16_t)0x0010)            /*!< Filter 4 Active */
+#define  CAN_FA1R_FACT5                      ((uint16_t)0x0020)            /*!< Filter 5 Active */
+#define  CAN_FA1R_FACT6                      ((uint16_t)0x0040)            /*!< Filter 6 Active */
+#define  CAN_FA1R_FACT7                      ((uint16_t)0x0080)            /*!< Filter 7 Active */
+#define  CAN_FA1R_FACT8                      ((uint16_t)0x0100)            /*!< Filter 8 Active */
+#define  CAN_FA1R_FACT9                      ((uint16_t)0x0200)            /*!< Filter 9 Active */
+#define  CAN_FA1R_FACT10                     ((uint16_t)0x0400)            /*!< Filter 10 Active */
+#define  CAN_FA1R_FACT11                     ((uint16_t)0x0800)            /*!< Filter 11 Active */
+#define  CAN_FA1R_FACT12                     ((uint16_t)0x1000)            /*!< Filter 12 Active */
+#define  CAN_FA1R_FACT13                     ((uint16_t)0x2000)            /*!< Filter 13 Active */
+
+/*******************  Bit definition for CAN_F0R1 register  *******************/
+#define  CAN_F0R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F0R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F0R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F0R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F0R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F0R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F0R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F0R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F0R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F0R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F0R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F0R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F0R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F0R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F0R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F0R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F0R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F0R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F0R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F0R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F0R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F0R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F0R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F0R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F0R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F0R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F0R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F0R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F0R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F0R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F0R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F0R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F1R1 register  *******************/
+#define  CAN_F1R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F1R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F1R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F1R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F1R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F1R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F1R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F1R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F1R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F1R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F1R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F1R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F1R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F1R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F1R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F1R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F1R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F1R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F1R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F1R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F1R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F1R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F1R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F1R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F1R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F1R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F1R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F1R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F1R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F1R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F1R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F1R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F2R1 register  *******************/
+#define  CAN_F2R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F2R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F2R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F2R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F2R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F2R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F2R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F2R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F2R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F2R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F2R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F2R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F2R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F2R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F2R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F2R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F2R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F2R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F2R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F2R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F2R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F2R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F2R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F2R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F2R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F2R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F2R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F2R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F2R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F2R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F2R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F2R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F3R1 register  *******************/
+#define  CAN_F3R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F3R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F3R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F3R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F3R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F3R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F3R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F3R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F3R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F3R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F3R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F3R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F3R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F3R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F3R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F3R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F3R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F3R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F3R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F3R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F3R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F3R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F3R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F3R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F3R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F3R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F3R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F3R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F3R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F3R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F3R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F3R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F4R1 register  *******************/
+#define  CAN_F4R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F4R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F4R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F4R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F4R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F4R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F4R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F4R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F4R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F4R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F4R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F4R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F4R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F4R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F4R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F4R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F4R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F4R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F4R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F4R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F4R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F4R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F4R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F4R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F4R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F4R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F4R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F4R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F4R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F4R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F4R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F4R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F5R1 register  *******************/
+#define  CAN_F5R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F5R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F5R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F5R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F5R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F5R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F5R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F5R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F5R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F5R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F5R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F5R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F5R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F5R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F5R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F5R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F5R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F5R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F5R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F5R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F5R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F5R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F5R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F5R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F5R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F5R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F5R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F5R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F5R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F5R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F5R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F5R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F6R1 register  *******************/
+#define  CAN_F6R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F6R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F6R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F6R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F6R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F6R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F6R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F6R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F6R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F6R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F6R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F6R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F6R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F6R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F6R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F6R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F6R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F6R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F6R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F6R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F6R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F6R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F6R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F6R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F6R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F6R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F6R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F6R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F6R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F6R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F6R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F6R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F7R1 register  *******************/
+#define  CAN_F7R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F7R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F7R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F7R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F7R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F7R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F7R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F7R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F7R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F7R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F7R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F7R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F7R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F7R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F7R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F7R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F7R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F7R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F7R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F7R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F7R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F7R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F7R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F7R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F7R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F7R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F7R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F7R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F7R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F7R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F7R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F7R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F8R1 register  *******************/
+#define  CAN_F8R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F8R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F8R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F8R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F8R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F8R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F8R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F8R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F8R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F8R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F8R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F8R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F8R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F8R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F8R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F8R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F8R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F8R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F8R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F8R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F8R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F8R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F8R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F8R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F8R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F8R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F8R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F8R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F8R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F8R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F8R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F8R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F9R1 register  *******************/
+#define  CAN_F9R1_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F9R1_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F9R1_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F9R1_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F9R1_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F9R1_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F9R1_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F9R1_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F9R1_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F9R1_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F9R1_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F9R1_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F9R1_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F9R1_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F9R1_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F9R1_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F9R1_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F9R1_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F9R1_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F9R1_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F9R1_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F9R1_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F9R1_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F9R1_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F9R1_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F9R1_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F9R1_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F9R1_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F9R1_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F9R1_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F9R1_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F9R1_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F10R1 register  ******************/
+#define  CAN_F10R1_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F10R1_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F10R1_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F10R1_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F10R1_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F10R1_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F10R1_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F10R1_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F10R1_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F10R1_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F10R1_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F10R1_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F10R1_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F10R1_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F10R1_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F10R1_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F10R1_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F10R1_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F10R1_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F10R1_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F10R1_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F10R1_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F10R1_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F10R1_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F10R1_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F10R1_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F10R1_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F10R1_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F10R1_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F10R1_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F10R1_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F10R1_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F11R1 register  ******************/
+#define  CAN_F11R1_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F11R1_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F11R1_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F11R1_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F11R1_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F11R1_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F11R1_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F11R1_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F11R1_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F11R1_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F11R1_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F11R1_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F11R1_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F11R1_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F11R1_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F11R1_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F11R1_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F11R1_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F11R1_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F11R1_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F11R1_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F11R1_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F11R1_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F11R1_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F11R1_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F11R1_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F11R1_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F11R1_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F11R1_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F11R1_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F11R1_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F11R1_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F12R1 register  ******************/
+#define  CAN_F12R1_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F12R1_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F12R1_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F12R1_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F12R1_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F12R1_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F12R1_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F12R1_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F12R1_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F12R1_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F12R1_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F12R1_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F12R1_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F12R1_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F12R1_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F12R1_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F12R1_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F12R1_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F12R1_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F12R1_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F12R1_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F12R1_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F12R1_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F12R1_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F12R1_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F12R1_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F12R1_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F12R1_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F12R1_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F12R1_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F12R1_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F12R1_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F13R1 register  ******************/
+#define  CAN_F13R1_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F13R1_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F13R1_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F13R1_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F13R1_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F13R1_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F13R1_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F13R1_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F13R1_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F13R1_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F13R1_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F13R1_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F13R1_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F13R1_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F13R1_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F13R1_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F13R1_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F13R1_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F13R1_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F13R1_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F13R1_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F13R1_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F13R1_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F13R1_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F13R1_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F13R1_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F13R1_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F13R1_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F13R1_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F13R1_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F13R1_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F13R1_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F0R2 register  *******************/
+#define  CAN_F0R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F0R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F0R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F0R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F0R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F0R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F0R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F0R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F0R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F0R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F0R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F0R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F0R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F0R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F0R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F0R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F0R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F0R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F0R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F0R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F0R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F0R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F0R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F0R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F0R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F0R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F0R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F0R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F0R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F0R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F0R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F0R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F1R2 register  *******************/
+#define  CAN_F1R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F1R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F1R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F1R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F1R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F1R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F1R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F1R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F1R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F1R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F1R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F1R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F1R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F1R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F1R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F1R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F1R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F1R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F1R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F1R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F1R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F1R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F1R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F1R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F1R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F1R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F1R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F1R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F1R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F1R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F1R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F1R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F2R2 register  *******************/
+#define  CAN_F2R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F2R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F2R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F2R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F2R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F2R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F2R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F2R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F2R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F2R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F2R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F2R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F2R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F2R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F2R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F2R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F2R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F2R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F2R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F2R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F2R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F2R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F2R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F2R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F2R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F2R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F2R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F2R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F2R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F2R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F2R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F2R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F3R2 register  *******************/
+#define  CAN_F3R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F3R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F3R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F3R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F3R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F3R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F3R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F3R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F3R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F3R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F3R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F3R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F3R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F3R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F3R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F3R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F3R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F3R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F3R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F3R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F3R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F3R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F3R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F3R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F3R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F3R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F3R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F3R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F3R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F3R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F3R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F3R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F4R2 register  *******************/
+#define  CAN_F4R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F4R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F4R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F4R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F4R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F4R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F4R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F4R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F4R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F4R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F4R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F4R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F4R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F4R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F4R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F4R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F4R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F4R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F4R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F4R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F4R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F4R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F4R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F4R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F4R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F4R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F4R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F4R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F4R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F4R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F4R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F4R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F5R2 register  *******************/
+#define  CAN_F5R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F5R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F5R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F5R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F5R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F5R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F5R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F5R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F5R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F5R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F5R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F5R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F5R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F5R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F5R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F5R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F5R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F5R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F5R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F5R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F5R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F5R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F5R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F5R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F5R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F5R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F5R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F5R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F5R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F5R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F5R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F5R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F6R2 register  *******************/
+#define  CAN_F6R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F6R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F6R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F6R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F6R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F6R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F6R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F6R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F6R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F6R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F6R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F6R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F6R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F6R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F6R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F6R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F6R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F6R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F6R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F6R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F6R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F6R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F6R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F6R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F6R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F6R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F6R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F6R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F6R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F6R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F6R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F6R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F7R2 register  *******************/
+#define  CAN_F7R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F7R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F7R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F7R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F7R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F7R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F7R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F7R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F7R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F7R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F7R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F7R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F7R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F7R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F7R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F7R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F7R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F7R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F7R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F7R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F7R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F7R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F7R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F7R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F7R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F7R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F7R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F7R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F7R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F7R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F7R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F7R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F8R2 register  *******************/
+#define  CAN_F8R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F8R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F8R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F8R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F8R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F8R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F8R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F8R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F8R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F8R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F8R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F8R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F8R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F8R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F8R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F8R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F8R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F8R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F8R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F8R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F8R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F8R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F8R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F8R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F8R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F8R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F8R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F8R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F8R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F8R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F8R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F8R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F9R2 register  *******************/
+#define  CAN_F9R2_FB0                        ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F9R2_FB1                        ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F9R2_FB2                        ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F9R2_FB3                        ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F9R2_FB4                        ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F9R2_FB5                        ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F9R2_FB6                        ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F9R2_FB7                        ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F9R2_FB8                        ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F9R2_FB9                        ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F9R2_FB10                       ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F9R2_FB11                       ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F9R2_FB12                       ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F9R2_FB13                       ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F9R2_FB14                       ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F9R2_FB15                       ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F9R2_FB16                       ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F9R2_FB17                       ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F9R2_FB18                       ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F9R2_FB19                       ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F9R2_FB20                       ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F9R2_FB21                       ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F9R2_FB22                       ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F9R2_FB23                       ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F9R2_FB24                       ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F9R2_FB25                       ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F9R2_FB26                       ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F9R2_FB27                       ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F9R2_FB28                       ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F9R2_FB29                       ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F9R2_FB30                       ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F9R2_FB31                       ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F10R2 register  ******************/
+#define  CAN_F10R2_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F10R2_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F10R2_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F10R2_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F10R2_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F10R2_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F10R2_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F10R2_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F10R2_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F10R2_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F10R2_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F10R2_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F10R2_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F10R2_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F10R2_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F10R2_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F10R2_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F10R2_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F10R2_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F10R2_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F10R2_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F10R2_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F10R2_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F10R2_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F10R2_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F10R2_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F10R2_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F10R2_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F10R2_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F10R2_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F10R2_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F10R2_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F11R2 register  ******************/
+#define  CAN_F11R2_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F11R2_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F11R2_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F11R2_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F11R2_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F11R2_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F11R2_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F11R2_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F11R2_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F11R2_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F11R2_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F11R2_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F11R2_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F11R2_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F11R2_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F11R2_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F11R2_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F11R2_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F11R2_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F11R2_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F11R2_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F11R2_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F11R2_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F11R2_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F11R2_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F11R2_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F11R2_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F11R2_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F11R2_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F11R2_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F11R2_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F11R2_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F12R2 register  ******************/
+#define  CAN_F12R2_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F12R2_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F12R2_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F12R2_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F12R2_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F12R2_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F12R2_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F12R2_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F12R2_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F12R2_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F12R2_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F12R2_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F12R2_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F12R2_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F12R2_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F12R2_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F12R2_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F12R2_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F12R2_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F12R2_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F12R2_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F12R2_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F12R2_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F12R2_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F12R2_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F12R2_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F12R2_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F12R2_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F12R2_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F12R2_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F12R2_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F12R2_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/*******************  Bit definition for CAN_F13R2 register  ******************/
+#define  CAN_F13R2_FB0                       ((uint32_t)0x00000001)        /*!< Filter bit 0 */
+#define  CAN_F13R2_FB1                       ((uint32_t)0x00000002)        /*!< Filter bit 1 */
+#define  CAN_F13R2_FB2                       ((uint32_t)0x00000004)        /*!< Filter bit 2 */
+#define  CAN_F13R2_FB3                       ((uint32_t)0x00000008)        /*!< Filter bit 3 */
+#define  CAN_F13R2_FB4                       ((uint32_t)0x00000010)        /*!< Filter bit 4 */
+#define  CAN_F13R2_FB5                       ((uint32_t)0x00000020)        /*!< Filter bit 5 */
+#define  CAN_F13R2_FB6                       ((uint32_t)0x00000040)        /*!< Filter bit 6 */
+#define  CAN_F13R2_FB7                       ((uint32_t)0x00000080)        /*!< Filter bit 7 */
+#define  CAN_F13R2_FB8                       ((uint32_t)0x00000100)        /*!< Filter bit 8 */
+#define  CAN_F13R2_FB9                       ((uint32_t)0x00000200)        /*!< Filter bit 9 */
+#define  CAN_F13R2_FB10                      ((uint32_t)0x00000400)        /*!< Filter bit 10 */
+#define  CAN_F13R2_FB11                      ((uint32_t)0x00000800)        /*!< Filter bit 11 */
+#define  CAN_F13R2_FB12                      ((uint32_t)0x00001000)        /*!< Filter bit 12 */
+#define  CAN_F13R2_FB13                      ((uint32_t)0x00002000)        /*!< Filter bit 13 */
+#define  CAN_F13R2_FB14                      ((uint32_t)0x00004000)        /*!< Filter bit 14 */
+#define  CAN_F13R2_FB15                      ((uint32_t)0x00008000)        /*!< Filter bit 15 */
+#define  CAN_F13R2_FB16                      ((uint32_t)0x00010000)        /*!< Filter bit 16 */
+#define  CAN_F13R2_FB17                      ((uint32_t)0x00020000)        /*!< Filter bit 17 */
+#define  CAN_F13R2_FB18                      ((uint32_t)0x00040000)        /*!< Filter bit 18 */
+#define  CAN_F13R2_FB19                      ((uint32_t)0x00080000)        /*!< Filter bit 19 */
+#define  CAN_F13R2_FB20                      ((uint32_t)0x00100000)        /*!< Filter bit 20 */
+#define  CAN_F13R2_FB21                      ((uint32_t)0x00200000)        /*!< Filter bit 21 */
+#define  CAN_F13R2_FB22                      ((uint32_t)0x00400000)        /*!< Filter bit 22 */
+#define  CAN_F13R2_FB23                      ((uint32_t)0x00800000)        /*!< Filter bit 23 */
+#define  CAN_F13R2_FB24                      ((uint32_t)0x01000000)        /*!< Filter bit 24 */
+#define  CAN_F13R2_FB25                      ((uint32_t)0x02000000)        /*!< Filter bit 25 */
+#define  CAN_F13R2_FB26                      ((uint32_t)0x04000000)        /*!< Filter bit 26 */
+#define  CAN_F13R2_FB27                      ((uint32_t)0x08000000)        /*!< Filter bit 27 */
+#define  CAN_F13R2_FB28                      ((uint32_t)0x10000000)        /*!< Filter bit 28 */
+#define  CAN_F13R2_FB29                      ((uint32_t)0x20000000)        /*!< Filter bit 29 */
+#define  CAN_F13R2_FB30                      ((uint32_t)0x40000000)        /*!< Filter bit 30 */
+#define  CAN_F13R2_FB31                      ((uint32_t)0x80000000)        /*!< Filter bit 31 */
+
+/******************************************************************************/
+/*                                                                            */
+/*                        Serial Peripheral Interface                         */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for SPI_CR1 register  ********************/
+#define  SPI_CR1_CPHA                        ((uint16_t)0x0001)            /*!< Clock Phase */
+#define  SPI_CR1_CPOL                        ((uint16_t)0x0002)            /*!< Clock Polarity */
+#define  SPI_CR1_MSTR                        ((uint16_t)0x0004)            /*!< Master Selection */
+
+#define  SPI_CR1_BR                          ((uint16_t)0x0038)            /*!< BR[2:0] bits (Baud Rate Control) */
+#define  SPI_CR1_BR_0                        ((uint16_t)0x0008)            /*!< Bit 0 */
+#define  SPI_CR1_BR_1                        ((uint16_t)0x0010)            /*!< Bit 1 */
+#define  SPI_CR1_BR_2                        ((uint16_t)0x0020)            /*!< Bit 2 */
+
+#define  SPI_CR1_SPE                         ((uint16_t)0x0040)            /*!< SPI Enable */
+#define  SPI_CR1_LSBFIRST                    ((uint16_t)0x0080)            /*!< Frame Format */
+#define  SPI_CR1_SSI                         ((uint16_t)0x0100)            /*!< Internal slave select */
+#define  SPI_CR1_SSM                         ((uint16_t)0x0200)            /*!< Software slave management */
+#define  SPI_CR1_RXONLY                      ((uint16_t)0x0400)            /*!< Receive only */
+#define  SPI_CR1_DFF                         ((uint16_t)0x0800)            /*!< Data Frame Format */
+#define  SPI_CR1_CRCNEXT                     ((uint16_t)0x1000)            /*!< Transmit CRC next */
+#define  SPI_CR1_CRCEN                       ((uint16_t)0x2000)            /*!< Hardware CRC calculation enable */
+#define  SPI_CR1_BIDIOE                      ((uint16_t)0x4000)            /*!< Output enable in bidirectional mode */
+#define  SPI_CR1_BIDIMODE                    ((uint16_t)0x8000)            /*!< Bidirectional data mode enable */
+
+/*******************  Bit definition for SPI_CR2 register  ********************/
+#define  SPI_CR2_RXDMAEN                     ((uint8_t)0x01)               /*!< Rx Buffer DMA Enable */
+#define  SPI_CR2_TXDMAEN                     ((uint8_t)0x02)               /*!< Tx Buffer DMA Enable */
+#define  SPI_CR2_SSOE                        ((uint8_t)0x04)               /*!< SS Output Enable */
+#define  SPI_CR2_ERRIE                       ((uint8_t)0x20)               /*!< Error Interrupt Enable */
+#define  SPI_CR2_RXNEIE                      ((uint8_t)0x40)               /*!< RX buffer Not Empty Interrupt Enable */
+#define  SPI_CR2_TXEIE                       ((uint8_t)0x80)               /*!< Tx buffer Empty Interrupt Enable */
+
+/********************  Bit definition for SPI_SR register  ********************/
+#define  SPI_SR_RXNE                         ((uint8_t)0x01)               /*!< Receive buffer Not Empty */
+#define  SPI_SR_TXE                          ((uint8_t)0x02)               /*!< Transmit buffer Empty */
+#define  SPI_SR_CHSIDE                       ((uint8_t)0x04)               /*!< Channel side */
+#define  SPI_SR_UDR                          ((uint8_t)0x08)               /*!< Underrun flag */
+#define  SPI_SR_CRCERR                       ((uint8_t)0x10)               /*!< CRC Error flag */
+#define  SPI_SR_MODF                         ((uint8_t)0x20)               /*!< Mode fault */
+#define  SPI_SR_OVR                          ((uint8_t)0x40)               /*!< Overrun flag */
+#define  SPI_SR_BSY                          ((uint8_t)0x80)               /*!< Busy flag */
+
+/********************  Bit definition for SPI_DR register  ********************/
+#define  SPI_DR_DR                           ((uint16_t)0xFFFF)            /*!< Data Register */
+
+/*******************  Bit definition for SPI_CRCPR register  ******************/
+#define  SPI_CRCPR_CRCPOLY                   ((uint16_t)0xFFFF)            /*!< CRC polynomial register */
+
+/******************  Bit definition for SPI_RXCRCR register  ******************/
+#define  SPI_RXCRCR_RXCRC                    ((uint16_t)0xFFFF)            /*!< Rx CRC Register */
+
+/******************  Bit definition for SPI_TXCRCR register  ******************/
+#define  SPI_TXCRCR_TXCRC                    ((uint16_t)0xFFFF)            /*!< Tx CRC Register */
+
+/******************  Bit definition for SPI_I2SCFGR register  *****************/
+#define  SPI_I2SCFGR_CHLEN                   ((uint16_t)0x0001)            /*!< Channel length (number of bits per audio channel) */
+
+#define  SPI_I2SCFGR_DATLEN                  ((uint16_t)0x0006)            /*!< DATLEN[1:0] bits (Data length to be transferred) */
+#define  SPI_I2SCFGR_DATLEN_0                ((uint16_t)0x0002)            /*!< Bit 0 */
+#define  SPI_I2SCFGR_DATLEN_1                ((uint16_t)0x0004)            /*!< Bit 1 */
+
+#define  SPI_I2SCFGR_CKPOL                   ((uint16_t)0x0008)            /*!< steady state clock polarity */
+
+#define  SPI_I2SCFGR_I2SSTD                  ((uint16_t)0x0030)            /*!< I2SSTD[1:0] bits (I2S standard selection) */
+#define  SPI_I2SCFGR_I2SSTD_0                ((uint16_t)0x0010)            /*!< Bit 0 */
+#define  SPI_I2SCFGR_I2SSTD_1                ((uint16_t)0x0020)            /*!< Bit 1 */
+
+#define  SPI_I2SCFGR_PCMSYNC                 ((uint16_t)0x0080)            /*!< PCM frame synchronization */
+
+#define  SPI_I2SCFGR_I2SCFG                  ((uint16_t)0x0300)            /*!< I2SCFG[1:0] bits (I2S configuration mode) */
+#define  SPI_I2SCFGR_I2SCFG_0                ((uint16_t)0x0100)            /*!< Bit 0 */
+#define  SPI_I2SCFGR_I2SCFG_1                ((uint16_t)0x0200)            /*!< Bit 1 */
+
+#define  SPI_I2SCFGR_I2SE                    ((uint16_t)0x0400)            /*!< I2S Enable */
+#define  SPI_I2SCFGR_I2SMOD                  ((uint16_t)0x0800)            /*!< I2S mode selection */
+
+/******************  Bit definition for SPI_I2SPR register  *******************/
+#define  SPI_I2SPR_I2SDIV                    ((uint16_t)0x00FF)            /*!< I2S Linear prescaler */
+#define  SPI_I2SPR_ODD                       ((uint16_t)0x0100)            /*!< Odd factor for the prescaler */
+#define  SPI_I2SPR_MCKOE                     ((uint16_t)0x0200)            /*!< Master Clock Output Enable */
+
+/******************************************************************************/
+/*                                                                            */
+/*                      Inter-integrated Circuit Interface                    */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for I2C_CR1 register  ********************/
+#define  I2C_CR1_PE                          ((uint16_t)0x0001)            /*!< Peripheral Enable */
+#define  I2C_CR1_SMBUS                       ((uint16_t)0x0002)            /*!< SMBus Mode */
+#define  I2C_CR1_SMBTYPE                     ((uint16_t)0x0008)            /*!< SMBus Type */
+#define  I2C_CR1_ENARP                       ((uint16_t)0x0010)            /*!< ARP Enable */
+#define  I2C_CR1_ENPEC                       ((uint16_t)0x0020)            /*!< PEC Enable */
+#define  I2C_CR1_ENGC                        ((uint16_t)0x0040)            /*!< General Call Enable */
+#define  I2C_CR1_NOSTRETCH                   ((uint16_t)0x0080)            /*!< Clock Stretching Disable (Slave mode) */
+#define  I2C_CR1_START                       ((uint16_t)0x0100)            /*!< Start Generation */
+#define  I2C_CR1_STOP                        ((uint16_t)0x0200)            /*!< Stop Generation */
+#define  I2C_CR1_ACK                         ((uint16_t)0x0400)            /*!< Acknowledge Enable */
+#define  I2C_CR1_POS                         ((uint16_t)0x0800)            /*!< Acknowledge/PEC Position (for data reception) */
+#define  I2C_CR1_PEC                         ((uint16_t)0x1000)            /*!< Packet Error Checking */
+#define  I2C_CR1_ALERT                       ((uint16_t)0x2000)            /*!< SMBus Alert */
+#define  I2C_CR1_SWRST                       ((uint16_t)0x8000)            /*!< Software Reset */
+
+/*******************  Bit definition for I2C_CR2 register  ********************/
+#define  I2C_CR2_FREQ                        ((uint16_t)0x003F)            /*!< FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define  I2C_CR2_FREQ_0                      ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  I2C_CR2_FREQ_1                      ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  I2C_CR2_FREQ_2                      ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  I2C_CR2_FREQ_3                      ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  I2C_CR2_FREQ_4                      ((uint16_t)0x0010)            /*!< Bit 4 */
+#define  I2C_CR2_FREQ_5                      ((uint16_t)0x0020)            /*!< Bit 5 */
+
+#define  I2C_CR2_ITERREN                     ((uint16_t)0x0100)            /*!< Error Interrupt Enable */
+#define  I2C_CR2_ITEVTEN                     ((uint16_t)0x0200)            /*!< Event Interrupt Enable */
+#define  I2C_CR2_ITBUFEN                     ((uint16_t)0x0400)            /*!< Buffer Interrupt Enable */
+#define  I2C_CR2_DMAEN                       ((uint16_t)0x0800)            /*!< DMA Requests Enable */
+#define  I2C_CR2_LAST                        ((uint16_t)0x1000)            /*!< DMA Last Transfer */
+
+/*******************  Bit definition for I2C_OAR1 register  *******************/
+#define  I2C_OAR1_ADD1_7                     ((uint16_t)0x00FE)            /*!< Interface Address */
+#define  I2C_OAR1_ADD8_9                     ((uint16_t)0x0300)            /*!< Interface Address */
+
+#define  I2C_OAR1_ADD0                       ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  I2C_OAR1_ADD1                       ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  I2C_OAR1_ADD2                       ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  I2C_OAR1_ADD3                       ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  I2C_OAR1_ADD4                       ((uint16_t)0x0010)            /*!< Bit 4 */
+#define  I2C_OAR1_ADD5                       ((uint16_t)0x0020)            /*!< Bit 5 */
+#define  I2C_OAR1_ADD6                       ((uint16_t)0x0040)            /*!< Bit 6 */
+#define  I2C_OAR1_ADD7                       ((uint16_t)0x0080)            /*!< Bit 7 */
+#define  I2C_OAR1_ADD8                       ((uint16_t)0x0100)            /*!< Bit 8 */
+#define  I2C_OAR1_ADD9                       ((uint16_t)0x0200)            /*!< Bit 9 */
+
+#define  I2C_OAR1_ADDMODE                    ((uint16_t)0x8000)            /*!< Addressing Mode (Slave mode) */
+
+/*******************  Bit definition for I2C_OAR2 register  *******************/
+#define  I2C_OAR2_ENDUAL                     ((uint8_t)0x01)               /*!< Dual addressing mode enable */
+#define  I2C_OAR2_ADD2                       ((uint8_t)0xFE)               /*!< Interface address */
+
+/********************  Bit definition for I2C_DR register  ********************/
+#define  I2C_DR_DR                           ((uint8_t)0xFF)               /*!< 8-bit Data Register */
+
+/*******************  Bit definition for I2C_SR1 register  ********************/
+#define  I2C_SR1_SB                          ((uint16_t)0x0001)            /*!< Start Bit (Master mode) */
+#define  I2C_SR1_ADDR                        ((uint16_t)0x0002)            /*!< Address sent (master mode)/matched (slave mode) */
+#define  I2C_SR1_BTF                         ((uint16_t)0x0004)            /*!< Byte Transfer Finished */
+#define  I2C_SR1_ADD10                       ((uint16_t)0x0008)            /*!< 10-bit header sent (Master mode) */
+#define  I2C_SR1_STOPF                       ((uint16_t)0x0010)            /*!< Stop detection (Slave mode) */
+#define  I2C_SR1_RXNE                        ((uint16_t)0x0040)            /*!< Data Register not Empty (receivers) */
+#define  I2C_SR1_TXE                         ((uint16_t)0x0080)            /*!< Data Register Empty (transmitters) */
+#define  I2C_SR1_BERR                        ((uint16_t)0x0100)            /*!< Bus Error */
+#define  I2C_SR1_ARLO                        ((uint16_t)0x0200)            /*!< Arbitration Lost (master mode) */
+#define  I2C_SR1_AF                          ((uint16_t)0x0400)            /*!< Acknowledge Failure */
+#define  I2C_SR1_OVR                         ((uint16_t)0x0800)            /*!< Overrun/Underrun */
+#define  I2C_SR1_PECERR                      ((uint16_t)0x1000)            /*!< PEC Error in reception */
+#define  I2C_SR1_TIMEOUT                     ((uint16_t)0x4000)            /*!< Timeout or Tlow Error */
+#define  I2C_SR1_SMBALERT                    ((uint16_t)0x8000)            /*!< SMBus Alert */
+
+/*******************  Bit definition for I2C_SR2 register  ********************/
+#define  I2C_SR2_MSL                         ((uint16_t)0x0001)            /*!< Master/Slave */
+#define  I2C_SR2_BUSY                        ((uint16_t)0x0002)            /*!< Bus Busy */
+#define  I2C_SR2_TRA                         ((uint16_t)0x0004)            /*!< Transmitter/Receiver */
+#define  I2C_SR2_GENCALL                     ((uint16_t)0x0010)            /*!< General Call Address (Slave mode) */
+#define  I2C_SR2_SMBDEFAULT                  ((uint16_t)0x0020)            /*!< SMBus Device Default Address (Slave mode) */
+#define  I2C_SR2_SMBHOST                     ((uint16_t)0x0040)            /*!< SMBus Host Header (Slave mode) */
+#define  I2C_SR2_DUALF                       ((uint16_t)0x0080)            /*!< Dual Flag (Slave mode) */
+#define  I2C_SR2_PEC                         ((uint16_t)0xFF00)            /*!< Packet Error Checking Register */
+
+/*******************  Bit definition for I2C_CCR register  ********************/
+#define  I2C_CCR_CCR                         ((uint16_t)0x0FFF)            /*!< Clock Control Register in Fast/Standard mode (Master mode) */
+#define  I2C_CCR_DUTY                        ((uint16_t)0x4000)            /*!< Fast Mode Duty Cycle */
+#define  I2C_CCR_FS                          ((uint16_t)0x8000)            /*!< I2C Master Mode Selection */
+
+/******************  Bit definition for I2C_TRISE register  *******************/
+#define  I2C_TRISE_TRISE                     ((uint8_t)0x3F)               /*!< Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/******************************************************************************/
+/*                                                                            */
+/*         Universal Synchronous Asynchronous Receiver Transmitter            */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for USART_SR register  *******************/
+#define  USART_SR_PE                         ((uint16_t)0x0001)            /*!< Parity Error */
+#define  USART_SR_FE                         ((uint16_t)0x0002)            /*!< Framing Error */
+#define  USART_SR_NE                         ((uint16_t)0x0004)            /*!< Noise Error Flag */
+#define  USART_SR_ORE                        ((uint16_t)0x0008)            /*!< OverRun Error */
+#define  USART_SR_IDLE                       ((uint16_t)0x0010)            /*!< IDLE line detected */
+#define  USART_SR_RXNE                       ((uint16_t)0x0020)            /*!< Read Data Register Not Empty */
+#define  USART_SR_TC                         ((uint16_t)0x0040)            /*!< Transmission Complete */
+#define  USART_SR_TXE                        ((uint16_t)0x0080)            /*!< Transmit Data Register Empty */
+#define  USART_SR_LBD                        ((uint16_t)0x0100)            /*!< LIN Break Detection Flag */
+#define  USART_SR_CTS                        ((uint16_t)0x0200)            /*!< CTS Flag */
+
+/*******************  Bit definition for USART_DR register  *******************/
+#define  USART_DR_DR                         ((uint16_t)0x01FF)            /*!< Data value */
+
+/******************  Bit definition for USART_BRR register  *******************/
+#define  USART_BRR_DIV_Fraction              ((uint16_t)0x000F)            /*!< Fraction of USARTDIV */
+#define  USART_BRR_DIV_Mantissa              ((uint16_t)0xFFF0)            /*!< Mantissa of USARTDIV */
+
+/******************  Bit definition for USART_CR1 register  *******************/
+#define  USART_CR1_SBK                       ((uint16_t)0x0001)            /*!< Send Break */
+#define  USART_CR1_RWU                       ((uint16_t)0x0002)            /*!< Receiver wakeup */
+#define  USART_CR1_RE                        ((uint16_t)0x0004)            /*!< Receiver Enable */
+#define  USART_CR1_TE                        ((uint16_t)0x0008)            /*!< Transmitter Enable */
+#define  USART_CR1_IDLEIE                    ((uint16_t)0x0010)            /*!< IDLE Interrupt Enable */
+#define  USART_CR1_RXNEIE                    ((uint16_t)0x0020)            /*!< RXNE Interrupt Enable */
+#define  USART_CR1_TCIE                      ((uint16_t)0x0040)            /*!< Transmission Complete Interrupt Enable */
+#define  USART_CR1_TXEIE                     ((uint16_t)0x0080)            /*!< PE Interrupt Enable */
+#define  USART_CR1_PEIE                      ((uint16_t)0x0100)            /*!< PE Interrupt Enable */
+#define  USART_CR1_PS                        ((uint16_t)0x0200)            /*!< Parity Selection */
+#define  USART_CR1_PCE                       ((uint16_t)0x0400)            /*!< Parity Control Enable */
+#define  USART_CR1_WAKE                      ((uint16_t)0x0800)            /*!< Wakeup method */
+#define  USART_CR1_M                         ((uint16_t)0x1000)            /*!< Word length */
+#define  USART_CR1_UE                        ((uint16_t)0x2000)            /*!< USART Enable */
+#define  USART_CR1_OVER8                     ((uint16_t)0x8000)            /*!< USART Oversmapling 8-bits */
+
+/******************  Bit definition for USART_CR2 register  *******************/
+#define  USART_CR2_ADD                       ((uint16_t)0x000F)            /*!< Address of the USART node */
+#define  USART_CR2_LBDL                      ((uint16_t)0x0020)            /*!< LIN Break Detection Length */
+#define  USART_CR2_LBDIE                     ((uint16_t)0x0040)            /*!< LIN Break Detection Interrupt Enable */
+#define  USART_CR2_LBCL                      ((uint16_t)0x0100)            /*!< Last Bit Clock pulse */
+#define  USART_CR2_CPHA                      ((uint16_t)0x0200)            /*!< Clock Phase */
+#define  USART_CR2_CPOL                      ((uint16_t)0x0400)            /*!< Clock Polarity */
+#define  USART_CR2_CLKEN                     ((uint16_t)0x0800)            /*!< Clock Enable */
+
+#define  USART_CR2_STOP                      ((uint16_t)0x3000)            /*!< STOP[1:0] bits (STOP bits) */
+#define  USART_CR2_STOP_0                    ((uint16_t)0x1000)            /*!< Bit 0 */
+#define  USART_CR2_STOP_1                    ((uint16_t)0x2000)            /*!< Bit 1 */
+
+#define  USART_CR2_LINEN                     ((uint16_t)0x4000)            /*!< LIN mode enable */
+
+/******************  Bit definition for USART_CR3 register  *******************/
+#define  USART_CR3_EIE                       ((uint16_t)0x0001)            /*!< Error Interrupt Enable */
+#define  USART_CR3_IREN                      ((uint16_t)0x0002)            /*!< IrDA mode Enable */
+#define  USART_CR3_IRLP                      ((uint16_t)0x0004)            /*!< IrDA Low-Power */
+#define  USART_CR3_HDSEL                     ((uint16_t)0x0008)            /*!< Half-Duplex Selection */
+#define  USART_CR3_NACK                      ((uint16_t)0x0010)            /*!< Smartcard NACK enable */
+#define  USART_CR3_SCEN                      ((uint16_t)0x0020)            /*!< Smartcard mode enable */
+#define  USART_CR3_DMAR                      ((uint16_t)0x0040)            /*!< DMA Enable Receiver */
+#define  USART_CR3_DMAT                      ((uint16_t)0x0080)            /*!< DMA Enable Transmitter */
+#define  USART_CR3_RTSE                      ((uint16_t)0x0100)            /*!< RTS Enable */
+#define  USART_CR3_CTSE                      ((uint16_t)0x0200)            /*!< CTS Enable */
+#define  USART_CR3_CTSIE                     ((uint16_t)0x0400)            /*!< CTS Interrupt Enable */
+#define  USART_CR3_ONEBIT                    ((uint16_t)0x0800)            /*!< One Bit method */
+
+/******************  Bit definition for USART_GTPR register  ******************/
+#define  USART_GTPR_PSC                      ((uint16_t)0x00FF)            /*!< PSC[7:0] bits (Prescaler value) */
+#define  USART_GTPR_PSC_0                    ((uint16_t)0x0001)            /*!< Bit 0 */
+#define  USART_GTPR_PSC_1                    ((uint16_t)0x0002)            /*!< Bit 1 */
+#define  USART_GTPR_PSC_2                    ((uint16_t)0x0004)            /*!< Bit 2 */
+#define  USART_GTPR_PSC_3                    ((uint16_t)0x0008)            /*!< Bit 3 */
+#define  USART_GTPR_PSC_4                    ((uint16_t)0x0010)            /*!< Bit 4 */
+#define  USART_GTPR_PSC_5                    ((uint16_t)0x0020)            /*!< Bit 5 */
+#define  USART_GTPR_PSC_6                    ((uint16_t)0x0040)            /*!< Bit 6 */
+#define  USART_GTPR_PSC_7                    ((uint16_t)0x0080)            /*!< Bit 7 */
+
+#define  USART_GTPR_GT                       ((uint16_t)0xFF00)            /*!< Guard time value */
+
+/******************************************************************************/
+/*                                                                            */
+/*                                 Debug MCU                                  */
+/*                                                                            */
+/******************************************************************************/
+
+/****************  Bit definition for DBGMCU_IDCODE register  *****************/
+#define  DBGMCU_IDCODE_DEV_ID                ((uint32_t)0x00000FFF)        /*!< Device Identifier */
+
+#define  DBGMCU_IDCODE_REV_ID                ((uint32_t)0xFFFF0000)        /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define  DBGMCU_IDCODE_REV_ID_0              ((uint32_t)0x00010000)        /*!< Bit 0 */
+#define  DBGMCU_IDCODE_REV_ID_1              ((uint32_t)0x00020000)        /*!< Bit 1 */
+#define  DBGMCU_IDCODE_REV_ID_2              ((uint32_t)0x00040000)        /*!< Bit 2 */
+#define  DBGMCU_IDCODE_REV_ID_3              ((uint32_t)0x00080000)        /*!< Bit 3 */
+#define  DBGMCU_IDCODE_REV_ID_4              ((uint32_t)0x00100000)        /*!< Bit 4 */
+#define  DBGMCU_IDCODE_REV_ID_5              ((uint32_t)0x00200000)        /*!< Bit 5 */
+#define  DBGMCU_IDCODE_REV_ID_6              ((uint32_t)0x00400000)        /*!< Bit 6 */
+#define  DBGMCU_IDCODE_REV_ID_7              ((uint32_t)0x00800000)        /*!< Bit 7 */
+#define  DBGMCU_IDCODE_REV_ID_8              ((uint32_t)0x01000000)        /*!< Bit 8 */
+#define  DBGMCU_IDCODE_REV_ID_9              ((uint32_t)0x02000000)        /*!< Bit 9 */
+#define  DBGMCU_IDCODE_REV_ID_10             ((uint32_t)0x04000000)        /*!< Bit 10 */
+#define  DBGMCU_IDCODE_REV_ID_11             ((uint32_t)0x08000000)        /*!< Bit 11 */
+#define  DBGMCU_IDCODE_REV_ID_12             ((uint32_t)0x10000000)        /*!< Bit 12 */
+#define  DBGMCU_IDCODE_REV_ID_13             ((uint32_t)0x20000000)        /*!< Bit 13 */
+#define  DBGMCU_IDCODE_REV_ID_14             ((uint32_t)0x40000000)        /*!< Bit 14 */
+#define  DBGMCU_IDCODE_REV_ID_15             ((uint32_t)0x80000000)        /*!< Bit 15 */
+
+/******************  Bit definition for DBGMCU_CR register  *******************/
+#define  DBGMCU_CR_DBG_SLEEP                 ((uint32_t)0x00000001)        /*!< Debug Sleep Mode */
+#define  DBGMCU_CR_DBG_STOP                  ((uint32_t)0x00000002)        /*!< Debug Stop Mode */
+#define  DBGMCU_CR_DBG_STANDBY               ((uint32_t)0x00000004)        /*!< Debug Standby mode */
+#define  DBGMCU_CR_TRACE_IOEN                ((uint32_t)0x00000020)        /*!< Trace Pin Assignment Control */
+
+#define  DBGMCU_CR_TRACE_MODE                ((uint32_t)0x000000C0)        /*!< TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */
+#define  DBGMCU_CR_TRACE_MODE_0              ((uint32_t)0x00000040)        /*!< Bit 0 */
+#define  DBGMCU_CR_TRACE_MODE_1              ((uint32_t)0x00000080)        /*!< Bit 1 */
+
+#define  DBGMCU_CR_DBG_IWDG_STOP             ((uint32_t)0x00000100)        /*!< Debug Independent Watchdog stopped when Core is halted */
+#define  DBGMCU_CR_DBG_WWDG_STOP             ((uint32_t)0x00000200)        /*!< Debug Window Watchdog stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM1_STOP             ((uint32_t)0x00000400)        /*!< TIM1 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM2_STOP             ((uint32_t)0x00000800)        /*!< TIM2 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM3_STOP             ((uint32_t)0x00001000)        /*!< TIM3 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM4_STOP             ((uint32_t)0x00002000)        /*!< TIM4 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_CAN1_STOP             ((uint32_t)0x00004000)        /*!< Debug CAN1 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT    ((uint32_t)0x00008000)        /*!< SMBUS timeout mode stopped when Core is halted */
+#define  DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT    ((uint32_t)0x00010000)        /*!< SMBUS timeout mode stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM8_STOP             ((uint32_t)0x00020000)        /*!< TIM8 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM5_STOP             ((uint32_t)0x00040000)        /*!< TIM5 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM6_STOP             ((uint32_t)0x00080000)        /*!< TIM6 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_TIM7_STOP             ((uint32_t)0x00100000)        /*!< TIM7 counter stopped when core is halted */
+#define  DBGMCU_CR_DBG_CAN2_STOP             ((uint32_t)0x00200000)        /*!< Debug CAN2 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM15_STOP            ((uint32_t)0x00400000)        /*!< Debug TIM15 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM16_STOP            ((uint32_t)0x00800000)        /*!< Debug TIM16 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM17_STOP            ((uint32_t)0x01000000)        /*!< Debug TIM17 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM12_STOP            ((uint32_t)0x02000000)        /*!< Debug TIM12 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM13_STOP            ((uint32_t)0x04000000)        /*!< Debug TIM13 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM14_STOP            ((uint32_t)0x08000000)        /*!< Debug TIM14 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM9_STOP             ((uint32_t)0x10000000)        /*!< Debug TIM9 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM10_STOP            ((uint32_t)0x20000000)        /*!< Debug TIM10 stopped when Core is halted */
+#define  DBGMCU_CR_DBG_TIM11_STOP            ((uint32_t)0x40000000)        /*!< Debug TIM11 stopped when Core is halted */
+
+/******************************************************************************/
+/*                                                                            */
+/*                      FLASH and Option Bytes Registers                      */
+/*                                                                            */
+/******************************************************************************/
+
+/*******************  Bit definition for FLASH_ACR register  ******************/
+#define  FLASH_ACR_LATENCY                   ((uint8_t)0x03)               /*!< LATENCY[2:0] bits (Latency) */
+#define  FLASH_ACR_LATENCY_0                 ((uint8_t)0x00)               /*!< Bit 0 */
+#define  FLASH_ACR_LATENCY_1                 ((uint8_t)0x01)               /*!< Bit 0 */
+#define  FLASH_ACR_LATENCY_2                 ((uint8_t)0x02)               /*!< Bit 1 */
+
+#define  FLASH_ACR_HLFCYA                    ((uint8_t)0x08)               /*!< Flash Half Cycle Access Enable */
+#define  FLASH_ACR_PRFTBE                    ((uint8_t)0x10)               /*!< Prefetch Buffer Enable */
+#define  FLASH_ACR_PRFTBS                    ((uint8_t)0x20)               /*!< Prefetch Buffer Status */
+
+/******************  Bit definition for FLASH_KEYR register  ******************/
+#define  FLASH_KEYR_FKEYR                    ((uint32_t)0xFFFFFFFF)        /*!< FPEC Key */
+
+/*****************  Bit definition for FLASH_OPTKEYR register  ****************/
+#define  FLASH_OPTKEYR_OPTKEYR               ((uint32_t)0xFFFFFFFF)        /*!< Option Byte Key */
+
+/******************  Bit definition for FLASH_SR register  *******************/
+#define  FLASH_SR_BSY                        ((uint8_t)0x01)               /*!< Busy */
+#define  FLASH_SR_PGERR                      ((uint8_t)0x04)               /*!< Programming Error */
+#define  FLASH_SR_WRPRTERR                   ((uint8_t)0x10)               /*!< Write Protection Error */
+#define  FLASH_SR_EOP                        ((uint8_t)0x20)               /*!< End of operation */
+
+/*******************  Bit definition for FLASH_CR register  *******************/
+#define  FLASH_CR_PG                         ((uint16_t)0x0001)            /*!< Programming */
+#define  FLASH_CR_PER                        ((uint16_t)0x0002)            /*!< Page Erase */
+#define  FLASH_CR_MER                        ((uint16_t)0x0004)            /*!< Mass Erase */
+#define  FLASH_CR_OPTPG                      ((uint16_t)0x0010)            /*!< Option Byte Programming */
+#define  FLASH_CR_OPTER                      ((uint16_t)0x0020)            /*!< Option Byte Erase */
+#define  FLASH_CR_STRT                       ((uint16_t)0x0040)            /*!< Start */
+#define  FLASH_CR_LOCK                       ((uint16_t)0x0080)            /*!< Lock */
+#define  FLASH_CR_OPTWRE                     ((uint16_t)0x0200)            /*!< Option Bytes Write Enable */
+#define  FLASH_CR_ERRIE                      ((uint16_t)0x0400)            /*!< Error Interrupt Enable */
+#define  FLASH_CR_EOPIE                      ((uint16_t)0x1000)            /*!< End of operation interrupt enable */
+
+/*******************  Bit definition for FLASH_AR register  *******************/
+#define  FLASH_AR_FAR                        ((uint32_t)0xFFFFFFFF)        /*!< Flash Address */
+
+/******************  Bit definition for FLASH_OBR register  *******************/
+#define  FLASH_OBR_OPTERR                    ((uint16_t)0x0001)            /*!< Option Byte Error */
+#define  FLASH_OBR_RDPRT                     ((uint16_t)0x0002)            /*!< Read protection */
+
+#define  FLASH_OBR_USER                      ((uint16_t)0x03FC)            /*!< User Option Bytes */
+#define  FLASH_OBR_WDG_SW                    ((uint16_t)0x0004)            /*!< WDG_SW */
+#define  FLASH_OBR_nRST_STOP                 ((uint16_t)0x0008)            /*!< nRST_STOP */
+#define  FLASH_OBR_nRST_STDBY                ((uint16_t)0x0010)            /*!< nRST_STDBY */
+#define  FLASH_OBR_BFB2                      ((uint16_t)0x0020)            /*!< BFB2 */
+
+/******************  Bit definition for FLASH_WRPR register  ******************/
+#define  FLASH_WRPR_WRP                        ((uint32_t)0xFFFFFFFF)        /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/******************  Bit definition for FLASH_RDP register  *******************/
+#define  FLASH_RDP_RDP                       ((uint32_t)0x000000FF)        /*!< Read protection option byte */
+#define  FLASH_RDP_nRDP                      ((uint32_t)0x0000FF00)        /*!< Read protection complemented option byte */
+
+/******************  Bit definition for FLASH_USER register  ******************/
+#define  FLASH_USER_USER                     ((uint32_t)0x00FF0000)        /*!< User option byte */
+#define  FLASH_USER_nUSER                    ((uint32_t)0xFF000000)        /*!< User complemented option byte */
+
+/******************  Bit definition for FLASH_Data0 register  *****************/
+#define  FLASH_Data0_Data0                   ((uint32_t)0x000000FF)        /*!< User data storage option byte */
+#define  FLASH_Data0_nData0                  ((uint32_t)0x0000FF00)        /*!< User data storage complemented option byte */
+
+/******************  Bit definition for FLASH_Data1 register  *****************/
+#define  FLASH_Data1_Data1                   ((uint32_t)0x00FF0000)        /*!< User data storage option byte */
+#define  FLASH_Data1_nData1                  ((uint32_t)0xFF000000)        /*!< User data storage complemented option byte */
+
+/******************  Bit definition for FLASH_WRP0 register  ******************/
+#define  FLASH_WRP0_WRP0                     ((uint32_t)0x000000FF)        /*!< Flash memory write protection option bytes */
+#define  FLASH_WRP0_nWRP0                    ((uint32_t)0x0000FF00)        /*!< Flash memory write protection complemented option bytes */
+
+/******************  Bit definition for FLASH_WRP1 register  ******************/
+#define  FLASH_WRP1_WRP1                     ((uint32_t)0x00FF0000)        /*!< Flash memory write protection option bytes */
+#define  FLASH_WRP1_nWRP1                    ((uint32_t)0xFF000000)        /*!< Flash memory write protection complemented option bytes */
+
+/******************  Bit definition for FLASH_WRP2 register  ******************/
+#define  FLASH_WRP2_WRP2                     ((uint32_t)0x000000FF)        /*!< Flash memory write protection option bytes */
+#define  FLASH_WRP2_nWRP2                    ((uint32_t)0x0000FF00)        /*!< Flash memory write protection complemented option bytes */
+
+/******************  Bit definition for FLASH_WRP3 register  ******************/
+#define  FLASH_WRP3_WRP3                     ((uint32_t)0x00FF0000)        /*!< Flash memory write protection option bytes */
+#define  FLASH_WRP3_nWRP3                    ((uint32_t)0xFF000000)        /*!< Flash memory write protection complemented option bytes */
+
+#ifdef STM32F10X_CL
+/******************************************************************************/
+/*                Ethernet MAC Registers bits definitions                     */
+/******************************************************************************/
+/* Bit definition for Ethernet MAC Control Register register */
+#define ETH_MACCR_WD      ((uint32_t)0x00800000)  /* Watchdog disable */
+#define ETH_MACCR_JD      ((uint32_t)0x00400000)  /* Jabber disable */
+#define ETH_MACCR_IFG     ((uint32_t)0x000E0000)  /* Inter-frame gap */
+  #define ETH_MACCR_IFG_96Bit     ((uint32_t)0x00000000)  /* Minimum IFG between frames during transmission is 96Bit */
+  #define ETH_MACCR_IFG_88Bit     ((uint32_t)0x00020000)  /* Minimum IFG between frames during transmission is 88Bit */
+  #define ETH_MACCR_IFG_80Bit     ((uint32_t)0x00040000)  /* Minimum IFG between frames during transmission is 80Bit */
+  #define ETH_MACCR_IFG_72Bit     ((uint32_t)0x00060000)  /* Minimum IFG between frames during transmission is 72Bit */
+  #define ETH_MACCR_IFG_64Bit     ((uint32_t)0x00080000)  /* Minimum IFG between frames during transmission is 64Bit */        
+  #define ETH_MACCR_IFG_56Bit     ((uint32_t)0x000A0000)  /* Minimum IFG between frames during transmission is 56Bit */
+  #define ETH_MACCR_IFG_48Bit     ((uint32_t)0x000C0000)  /* Minimum IFG between frames during transmission is 48Bit */
+  #define ETH_MACCR_IFG_40Bit     ((uint32_t)0x000E0000)  /* Minimum IFG between frames during transmission is 40Bit */              
+#define ETH_MACCR_CSD     ((uint32_t)0x00010000)  /* Carrier sense disable (during transmission) */
+#define ETH_MACCR_FES     ((uint32_t)0x00004000)  /* Fast ethernet speed */
+#define ETH_MACCR_ROD     ((uint32_t)0x00002000)  /* Receive own disable */
+#define ETH_MACCR_LM      ((uint32_t)0x00001000)  /* loopback mode */
+#define ETH_MACCR_DM      ((uint32_t)0x00000800)  /* Duplex mode */
+#define ETH_MACCR_IPCO    ((uint32_t)0x00000400)  /* IP Checksum offload */
+#define ETH_MACCR_RD      ((uint32_t)0x00000200)  /* Retry disable */
+#define ETH_MACCR_APCS    ((uint32_t)0x00000080)  /* Automatic Pad/CRC stripping */
+#define ETH_MACCR_BL      ((uint32_t)0x00000060)  /* Back-off limit: random integer number (r) of slot time delays before rescheduling
+                                                       a transmission attempt during retries after a collision: 0 =< r <2^k */
+  #define ETH_MACCR_BL_10    ((uint32_t)0x00000000)  /* k = min (n, 10) */
+  #define ETH_MACCR_BL_8     ((uint32_t)0x00000020)  /* k = min (n, 8) */
+  #define ETH_MACCR_BL_4     ((uint32_t)0x00000040)  /* k = min (n, 4) */
+  #define ETH_MACCR_BL_1     ((uint32_t)0x00000060)  /* k = min (n, 1) */ 
+#define ETH_MACCR_DC      ((uint32_t)0x00000010)  /* Defferal check */
+#define ETH_MACCR_TE      ((uint32_t)0x00000008)  /* Transmitter enable */
+#define ETH_MACCR_RE      ((uint32_t)0x00000004)  /* Receiver enable */
+
+/* Bit definition for Ethernet MAC Frame Filter Register */
+#define ETH_MACFFR_RA     ((uint32_t)0x80000000)  /* Receive all */ 
+#define ETH_MACFFR_HPF    ((uint32_t)0x00000400)  /* Hash or perfect filter */ 
+#define ETH_MACFFR_SAF    ((uint32_t)0x00000200)  /* Source address filter enable */ 
+#define ETH_MACFFR_SAIF   ((uint32_t)0x00000100)  /* SA inverse filtering */ 
+#define ETH_MACFFR_PCF    ((uint32_t)0x000000C0)  /* Pass control frames: 3 cases */
+  #define ETH_MACFFR_PCF_BlockAll                ((uint32_t)0x00000040)  /* MAC filters all control frames from reaching the application */
+  #define ETH_MACFFR_PCF_ForwardAll              ((uint32_t)0x00000080)  /* MAC forwards all control frames to application even if they fail the Address Filter */
+  #define ETH_MACFFR_PCF_ForwardPassedAddrFilter ((uint32_t)0x000000C0)  /* MAC forwards control frames that pass the Address Filter. */ 
+#define ETH_MACFFR_BFD    ((uint32_t)0x00000020)  /* Broadcast frame disable */ 
+#define ETH_MACFFR_PAM 	  ((uint32_t)0x00000010)  /* Pass all mutlicast */ 
+#define ETH_MACFFR_DAIF   ((uint32_t)0x00000008)  /* DA Inverse filtering */ 
+#define ETH_MACFFR_HM     ((uint32_t)0x00000004)  /* Hash multicast */ 
+#define ETH_MACFFR_HU     ((uint32_t)0x00000002)  /* Hash unicast */
+#define ETH_MACFFR_PM     ((uint32_t)0x00000001)  /* Promiscuous mode */
+
+/* Bit definition for Ethernet MAC Hash Table High Register */
+#define ETH_MACHTHR_HTH   ((uint32_t)0xFFFFFFFF)  /* Hash table high */
+
+/* Bit definition for Ethernet MAC Hash Table Low Register */
+#define ETH_MACHTLR_HTL   ((uint32_t)0xFFFFFFFF)  /* Hash table low */
+
+/* Bit definition for Ethernet MAC MII Address Register */
+#define ETH_MACMIIAR_PA   ((uint32_t)0x0000F800)  /* Physical layer address */ 
+#define ETH_MACMIIAR_MR   ((uint32_t)0x000007C0)  /* MII register in the selected PHY */ 
+#define ETH_MACMIIAR_CR   ((uint32_t)0x0000001C)  /* CR clock range: 6 cases */ 
+  #define ETH_MACMIIAR_CR_Div42   ((uint32_t)0x00000000)  /* HCLK:60-72 MHz; MDC clock= HCLK/42 */
+  #define ETH_MACMIIAR_CR_Div16   ((uint32_t)0x00000008)  /* HCLK:20-35 MHz; MDC clock= HCLK/16 */
+  #define ETH_MACMIIAR_CR_Div26   ((uint32_t)0x0000000C)  /* HCLK:35-60 MHz; MDC clock= HCLK/26 */
+#define ETH_MACMIIAR_MW   ((uint32_t)0x00000002)  /* MII write */ 
+#define ETH_MACMIIAR_MB   ((uint32_t)0x00000001)  /* MII busy */ 
+  
+/* Bit definition for Ethernet MAC MII Data Register */
+#define ETH_MACMIIDR_MD   ((uint32_t)0x0000FFFF)  /* MII data: read/write data from/to PHY */
+
+/* Bit definition for Ethernet MAC Flow Control Register */
+#define ETH_MACFCR_PT     ((uint32_t)0xFFFF0000)  /* Pause time */
+#define ETH_MACFCR_ZQPD   ((uint32_t)0x00000080)  /* Zero-quanta pause disable */
+#define ETH_MACFCR_PLT    ((uint32_t)0x00000030)  /* Pause low threshold: 4 cases */
+  #define ETH_MACFCR_PLT_Minus4   ((uint32_t)0x00000000)  /* Pause time minus 4 slot times */
+  #define ETH_MACFCR_PLT_Minus28  ((uint32_t)0x00000010)  /* Pause time minus 28 slot times */
+  #define ETH_MACFCR_PLT_Minus144 ((uint32_t)0x00000020)  /* Pause time minus 144 slot times */
+  #define ETH_MACFCR_PLT_Minus256 ((uint32_t)0x00000030)  /* Pause time minus 256 slot times */      
+#define ETH_MACFCR_UPFD   ((uint32_t)0x00000008)  /* Unicast pause frame detect */
+#define ETH_MACFCR_RFCE   ((uint32_t)0x00000004)  /* Receive flow control enable */
+#define ETH_MACFCR_TFCE   ((uint32_t)0x00000002)  /* Transmit flow control enable */
+#define ETH_MACFCR_FCBBPA ((uint32_t)0x00000001)  /* Flow control busy/backpressure activate */
+
+/* Bit definition for Ethernet MAC VLAN Tag Register */
+#define ETH_MACVLANTR_VLANTC ((uint32_t)0x00010000)  /* 12-bit VLAN tag comparison */
+#define ETH_MACVLANTR_VLANTI ((uint32_t)0x0000FFFF)  /* VLAN tag identifier (for receive frames) */
+
+/* Bit definition for Ethernet MAC Remote Wake-UpFrame Filter Register */ 
+#define ETH_MACRWUFFR_D   ((uint32_t)0xFFFFFFFF)  /* Wake-up frame filter register data */
+/* Eight sequential Writes to this address (offset 0x28) will write all Wake-UpFrame Filter Registers.
+   Eight sequential Reads from this address (offset 0x28) will read all Wake-UpFrame Filter Registers. */
+/* Wake-UpFrame Filter Reg0 : Filter 0 Byte Mask
+   Wake-UpFrame Filter Reg1 : Filter 1 Byte Mask
+   Wake-UpFrame Filter Reg2 : Filter 2 Byte Mask
+   Wake-UpFrame Filter Reg3 : Filter 3 Byte Mask
+   Wake-UpFrame Filter Reg4 : RSVD - Filter3 Command - RSVD - Filter2 Command - 
+                              RSVD - Filter1 Command - RSVD - Filter0 Command
+   Wake-UpFrame Filter Re5 : Filter3 Offset - Filter2 Offset - Filter1 Offset - Filter0 Offset
+   Wake-UpFrame Filter Re6 : Filter1 CRC16 - Filter0 CRC16
+   Wake-UpFrame Filter Re7 : Filter3 CRC16 - Filter2 CRC16 */
+
+/* Bit definition for Ethernet MAC PMT Control and Status Register */ 
+#define ETH_MACPMTCSR_WFFRPR ((uint32_t)0x80000000)  /* Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_MACPMTCSR_GU     ((uint32_t)0x00000200)  /* Global Unicast */
+#define ETH_MACPMTCSR_WFR    ((uint32_t)0x00000040)  /* Wake-Up Frame Received */
+#define ETH_MACPMTCSR_MPR    ((uint32_t)0x00000020)  /* Magic Packet Received */
+#define ETH_MACPMTCSR_WFE    ((uint32_t)0x00000004)  /* Wake-Up Frame Enable */
+#define ETH_MACPMTCSR_MPE    ((uint32_t)0x00000002)  /* Magic Packet Enable */
+#define ETH_MACPMTCSR_PD     ((uint32_t)0x00000001)  /* Power Down */
+
+/* Bit definition for Ethernet MAC Status Register */
+#define ETH_MACSR_TSTS      ((uint32_t)0x00000200)  /* Time stamp trigger status */
+#define ETH_MACSR_MMCTS     ((uint32_t)0x00000040)  /* MMC transmit status */
+#define ETH_MACSR_MMMCRS    ((uint32_t)0x00000020)  /* MMC receive status */
+#define ETH_MACSR_MMCS      ((uint32_t)0x00000010)  /* MMC status */
+#define ETH_MACSR_PMTS      ((uint32_t)0x00000008)  /* PMT status */
+
+/* Bit definition for Ethernet MAC Interrupt Mask Register */
+#define ETH_MACIMR_TSTIM     ((uint32_t)0x00000200)  /* Time stamp trigger interrupt mask */
+#define ETH_MACIMR_PMTIM     ((uint32_t)0x00000008)  /* PMT interrupt mask */
+
+/* Bit definition for Ethernet MAC Address0 High Register */
+#define ETH_MACA0HR_MACA0H   ((uint32_t)0x0000FFFF)  /* MAC address0 high */
+
+/* Bit definition for Ethernet MAC Address0 Low Register */
+#define ETH_MACA0LR_MACA0L   ((uint32_t)0xFFFFFFFF)  /* MAC address0 low */
+
+/* Bit definition for Ethernet MAC Address1 High Register */
+#define ETH_MACA1HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA1HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA1HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control: bits to mask for comparison of the MAC Address bytes */
+  #define ETH_MACA1HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA1HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA1HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA1HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA1HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA1HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [7:0] */ 
+#define ETH_MACA1HR_MACA1H   ((uint32_t)0x0000FFFF)  /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address1 Low Register */
+#define ETH_MACA1LR_MACA1L   ((uint32_t)0xFFFFFFFF)  /* MAC address1 low */
+
+/* Bit definition for Ethernet MAC Address2 High Register */
+#define ETH_MACA2HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA2HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA2HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control */
+  #define ETH_MACA2HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA2HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA2HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA2HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA2HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA2HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA2HR_MACA2H   ((uint32_t)0x0000FFFF)  /* MAC address1 high */
+
+/* Bit definition for Ethernet MAC Address2 Low Register */
+#define ETH_MACA2LR_MACA2L   ((uint32_t)0xFFFFFFFF)  /* MAC address2 low */
+
+/* Bit definition for Ethernet MAC Address3 High Register */
+#define ETH_MACA3HR_AE       ((uint32_t)0x80000000)  /* Address enable */
+#define ETH_MACA3HR_SA       ((uint32_t)0x40000000)  /* Source address */
+#define ETH_MACA3HR_MBC      ((uint32_t)0x3F000000)  /* Mask byte control */
+  #define ETH_MACA3HR_MBC_HBits15_8    ((uint32_t)0x20000000)  /* Mask MAC Address high reg bits [15:8] */
+  #define ETH_MACA3HR_MBC_HBits7_0     ((uint32_t)0x10000000)  /* Mask MAC Address high reg bits [7:0] */
+  #define ETH_MACA3HR_MBC_LBits31_24   ((uint32_t)0x08000000)  /* Mask MAC Address low reg bits [31:24] */
+  #define ETH_MACA3HR_MBC_LBits23_16   ((uint32_t)0x04000000)  /* Mask MAC Address low reg bits [23:16] */
+  #define ETH_MACA3HR_MBC_LBits15_8    ((uint32_t)0x02000000)  /* Mask MAC Address low reg bits [15:8] */
+  #define ETH_MACA3HR_MBC_LBits7_0     ((uint32_t)0x01000000)  /* Mask MAC Address low reg bits [70] */
+#define ETH_MACA3HR_MACA3H   ((uint32_t)0x0000FFFF)  /* MAC address3 high */
+
+/* Bit definition for Ethernet MAC Address3 Low Register */
+#define ETH_MACA3LR_MACA3L   ((uint32_t)0xFFFFFFFF)  /* MAC address3 low */
+
+/******************************************************************************/
+/*                Ethernet MMC Registers bits definition                      */
+/******************************************************************************/
+
+/* Bit definition for Ethernet MMC Contol Register */
+#define ETH_MMCCR_MCF        ((uint32_t)0x00000008)  /* MMC Counter Freeze */
+#define ETH_MMCCR_ROR        ((uint32_t)0x00000004)  /* Reset on Read */
+#define ETH_MMCCR_CSR        ((uint32_t)0x00000002)  /* Counter Stop Rollover */
+#define ETH_MMCCR_CR         ((uint32_t)0x00000001)  /* Counters Reset */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Register */
+#define ETH_MMCRIR_RGUFS     ((uint32_t)0x00020000)  /* Set when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIR_RFAES     ((uint32_t)0x00000040)  /* Set when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIR_RFCES     ((uint32_t)0x00000020)  /* Set when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Register */
+#define ETH_MMCTIR_TGFS      ((uint32_t)0x00200000)  /* Set when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFMSCS   ((uint32_t)0x00008000)  /* Set when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIR_TGFSCS    ((uint32_t)0x00004000)  /* Set when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Receive Interrupt Mask Register */
+#define ETH_MMCRIMR_RGUFM    ((uint32_t)0x00020000)  /* Mask the interrupt when Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFAEM    ((uint32_t)0x00000040)  /* Mask the interrupt when when Rx alignment error counter reaches half the maximum value */
+#define ETH_MMCRIMR_RFCEM    ((uint32_t)0x00000020)  /* Mask the interrupt when Rx crc error counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmit Interrupt Mask Register */
+#define ETH_MMCTIMR_TGFM     ((uint32_t)0x00200000)  /* Mask the interrupt when Tx good frame count counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFMSCM  ((uint32_t)0x00008000)  /* Mask the interrupt when Tx good multi col counter reaches half the maximum value */
+#define ETH_MMCTIMR_TGFSCM   ((uint32_t)0x00004000)  /* Mask the interrupt when Tx good single col counter reaches half the maximum value */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after Single Collision Counter Register */
+#define ETH_MMCTGFSCCR_TGFSCC     ((uint32_t)0xFFFFFFFF)  /* Number of successfully transmitted frames after a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames after More than a Single Collision Counter Register */
+#define ETH_MMCTGFMSCCR_TGFMSCC   ((uint32_t)0xFFFFFFFF)  /* Number of successfully transmitted frames after more than a single collision in Half-duplex mode. */
+
+/* Bit definition for Ethernet MMC Transmitted Good Frames Counter Register */
+#define ETH_MMCTGFCR_TGFC    ((uint32_t)0xFFFFFFFF)  /* Number of good frames transmitted. */
+
+/* Bit definition for Ethernet MMC Received Frames with CRC Error Counter Register */
+#define ETH_MMCRFCECR_RFCEC  ((uint32_t)0xFFFFFFFF)  /* Number of frames received with CRC error. */
+
+/* Bit definition for Ethernet MMC Received Frames with Alignement Error Counter Register */
+#define ETH_MMCRFAECR_RFAEC  ((uint32_t)0xFFFFFFFF)  /* Number of frames received with alignment (dribble) error */
+
+/* Bit definition for Ethernet MMC Received Good Unicast Frames Counter Register */
+#define ETH_MMCRGUFCR_RGUFC  ((uint32_t)0xFFFFFFFF)  /* Number of good unicast frames received. */
+
+/******************************************************************************/
+/*               Ethernet PTP Registers bits definition                       */
+/******************************************************************************/
+
+/* Bit definition for Ethernet PTP Time Stamp Contol Register */
+#define ETH_PTPTSCR_TSARU    ((uint32_t)0x00000020)  /* Addend register update */
+#define ETH_PTPTSCR_TSITE    ((uint32_t)0x00000010)  /* Time stamp interrupt trigger enable */
+#define ETH_PTPTSCR_TSSTU    ((uint32_t)0x00000008)  /* Time stamp update */
+#define ETH_PTPTSCR_TSSTI    ((uint32_t)0x00000004)  /* Time stamp initialize */
+#define ETH_PTPTSCR_TSFCU    ((uint32_t)0x00000002)  /* Time stamp fine or coarse update */
+#define ETH_PTPTSCR_TSE      ((uint32_t)0x00000001)  /* Time stamp enable */
+
+/* Bit definition for Ethernet PTP Sub-Second Increment Register */
+#define ETH_PTPSSIR_STSSI    ((uint32_t)0x000000FF)  /* System time Sub-second increment value */
+
+/* Bit definition for Ethernet PTP Time Stamp High Register */
+#define ETH_PTPTSHR_STS      ((uint32_t)0xFFFFFFFF)  /* System Time second */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Register */
+#define ETH_PTPTSLR_STPNS    ((uint32_t)0x80000000)  /* System Time Positive or negative time */
+#define ETH_PTPTSLR_STSS     ((uint32_t)0x7FFFFFFF)  /* System Time sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp High Update Register */
+#define ETH_PTPTSHUR_TSUS    ((uint32_t)0xFFFFFFFF)  /* Time stamp update seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Low Update Register */
+#define ETH_PTPTSLUR_TSUPNS  ((uint32_t)0x80000000)  /* Time stamp update Positive or negative time */
+#define ETH_PTPTSLUR_TSUSS   ((uint32_t)0x7FFFFFFF)  /* Time stamp update sub-seconds */
+
+/* Bit definition for Ethernet PTP Time Stamp Addend Register */
+#define ETH_PTPTSAR_TSA      ((uint32_t)0xFFFFFFFF)  /* Time stamp addend */
+
+/* Bit definition for Ethernet PTP Target Time High Register */
+#define ETH_PTPTTHR_TTSH     ((uint32_t)0xFFFFFFFF)  /* Target time stamp high */
+
+/* Bit definition for Ethernet PTP Target Time Low Register */
+#define ETH_PTPTTLR_TTSL     ((uint32_t)0xFFFFFFFF)  /* Target time stamp low */
+
+/******************************************************************************/
+/*                 Ethernet DMA Registers bits definition                     */
+/******************************************************************************/
+
+/* Bit definition for Ethernet DMA Bus Mode Register */
+#define ETH_DMABMR_AAB       ((uint32_t)0x02000000)  /* Address-Aligned beats */
+#define ETH_DMABMR_FPM        ((uint32_t)0x01000000)  /* 4xPBL mode */
+#define ETH_DMABMR_USP       ((uint32_t)0x00800000)  /* Use separate PBL */
+#define ETH_DMABMR_RDP       ((uint32_t)0x007E0000)  /* RxDMA PBL */
+  #define ETH_DMABMR_RDP_1Beat    ((uint32_t)0x00020000)  /* maximum number of beats to be transferred in one RxDMA transaction is 1 */
+  #define ETH_DMABMR_RDP_2Beat    ((uint32_t)0x00040000)  /* maximum number of beats to be transferred in one RxDMA transaction is 2 */
+  #define ETH_DMABMR_RDP_4Beat    ((uint32_t)0x00080000)  /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+  #define ETH_DMABMR_RDP_8Beat    ((uint32_t)0x00100000)  /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+  #define ETH_DMABMR_RDP_16Beat   ((uint32_t)0x00200000)  /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+  #define ETH_DMABMR_RDP_32Beat   ((uint32_t)0x00400000)  /* maximum number of beats to be transferred in one RxDMA transaction is 32 */                
+  #define ETH_DMABMR_RDP_4xPBL_4Beat   ((uint32_t)0x01020000)  /* maximum number of beats to be transferred in one RxDMA transaction is 4 */
+  #define ETH_DMABMR_RDP_4xPBL_8Beat   ((uint32_t)0x01040000)  /* maximum number of beats to be transferred in one RxDMA transaction is 8 */
+  #define ETH_DMABMR_RDP_4xPBL_16Beat  ((uint32_t)0x01080000)  /* maximum number of beats to be transferred in one RxDMA transaction is 16 */
+  #define ETH_DMABMR_RDP_4xPBL_32Beat  ((uint32_t)0x01100000)  /* maximum number of beats to be transferred in one RxDMA transaction is 32 */
+  #define ETH_DMABMR_RDP_4xPBL_64Beat  ((uint32_t)0x01200000)  /* maximum number of beats to be transferred in one RxDMA transaction is 64 */
+  #define ETH_DMABMR_RDP_4xPBL_128Beat ((uint32_t)0x01400000)  /* maximum number of beats to be transferred in one RxDMA transaction is 128 */  
+#define ETH_DMABMR_FB        ((uint32_t)0x00010000)  /* Fixed Burst */
+#define ETH_DMABMR_RTPR      ((uint32_t)0x0000C000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_1_1     ((uint32_t)0x00000000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_2_1     ((uint32_t)0x00004000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_3_1     ((uint32_t)0x00008000)  /* Rx Tx priority ratio */
+  #define ETH_DMABMR_RTPR_4_1     ((uint32_t)0x0000C000)  /* Rx Tx priority ratio */  
+#define ETH_DMABMR_PBL    ((uint32_t)0x00003F00)  /* Programmable burst length */
+  #define ETH_DMABMR_PBL_1Beat    ((uint32_t)0x00000100)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+  #define ETH_DMABMR_PBL_2Beat    ((uint32_t)0x00000200)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+  #define ETH_DMABMR_PBL_4Beat    ((uint32_t)0x00000400)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+  #define ETH_DMABMR_PBL_8Beat    ((uint32_t)0x00000800)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+  #define ETH_DMABMR_PBL_16Beat   ((uint32_t)0x00001000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+  #define ETH_DMABMR_PBL_32Beat   ((uint32_t)0x00002000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */                
+  #define ETH_DMABMR_PBL_4xPBL_4Beat   ((uint32_t)0x01000100)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+  #define ETH_DMABMR_PBL_4xPBL_8Beat   ((uint32_t)0x01000200)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+  #define ETH_DMABMR_PBL_4xPBL_16Beat  ((uint32_t)0x01000400)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+  #define ETH_DMABMR_PBL_4xPBL_32Beat  ((uint32_t)0x01000800)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+  #define ETH_DMABMR_PBL_4xPBL_64Beat  ((uint32_t)0x01001000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+  #define ETH_DMABMR_PBL_4xPBL_128Beat ((uint32_t)0x01002000)  /* maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+#define ETH_DMABMR_DSL       ((uint32_t)0x0000007C)  /* Descriptor Skip Length */
+#define ETH_DMABMR_DA        ((uint32_t)0x00000002)  /* DMA arbitration scheme */
+#define ETH_DMABMR_SR        ((uint32_t)0x00000001)  /* Software reset */
+
+/* Bit definition for Ethernet DMA Transmit Poll Demand Register */
+#define ETH_DMATPDR_TPD      ((uint32_t)0xFFFFFFFF)  /* Transmit poll demand */
+
+/* Bit definition for Ethernet DMA Receive Poll Demand Register */
+#define ETH_DMARPDR_RPD      ((uint32_t)0xFFFFFFFF)  /* Receive poll demand  */
+
+/* Bit definition for Ethernet DMA Receive Descriptor List Address Register */
+#define ETH_DMARDLAR_SRL     ((uint32_t)0xFFFFFFFF)  /* Start of receive list */
+
+/* Bit definition for Ethernet DMA Transmit Descriptor List Address Register */
+#define ETH_DMATDLAR_STL     ((uint32_t)0xFFFFFFFF)  /* Start of transmit list */
+
+/* Bit definition for Ethernet DMA Status Register */
+#define ETH_DMASR_TSTS       ((uint32_t)0x20000000)  /* Time-stamp trigger status */
+#define ETH_DMASR_PMTS       ((uint32_t)0x10000000)  /* PMT status */
+#define ETH_DMASR_MMCS       ((uint32_t)0x08000000)  /* MMC status */
+#define ETH_DMASR_EBS        ((uint32_t)0x03800000)  /* Error bits status */
+  /* combination with EBS[2:0] for GetFlagStatus function */
+  #define ETH_DMASR_EBS_DescAccess      ((uint32_t)0x02000000)  /* Error bits 0-data buffer, 1-desc. access */
+  #define ETH_DMASR_EBS_ReadTransf      ((uint32_t)0x01000000)  /* Error bits 0-write trnsf, 1-read transfr */
+  #define ETH_DMASR_EBS_DataTransfTx    ((uint32_t)0x00800000)  /* Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMASR_TPS         ((uint32_t)0x00700000)  /* Transmit process state */
+  #define ETH_DMASR_TPS_Stopped         ((uint32_t)0x00000000)  /* Stopped - Reset or Stop Tx Command issued  */
+  #define ETH_DMASR_TPS_Fetching        ((uint32_t)0x00100000)  /* Running - fetching the Tx descriptor */
+  #define ETH_DMASR_TPS_Waiting         ((uint32_t)0x00200000)  /* Running - waiting for status */
+  #define ETH_DMASR_TPS_Reading         ((uint32_t)0x00300000)  /* Running - reading the data from host memory */
+  #define ETH_DMASR_TPS_Suspended       ((uint32_t)0x00600000)  /* Suspended - Tx Descriptor unavailabe */
+  #define ETH_DMASR_TPS_Closing         ((uint32_t)0x00700000)  /* Running - closing Rx descriptor */
+#define ETH_DMASR_RPS         ((uint32_t)0x000E0000)  /* Receive process state */
+  #define ETH_DMASR_RPS_Stopped         ((uint32_t)0x00000000)  /* Stopped - Reset or Stop Rx Command issued */
+  #define ETH_DMASR_RPS_Fetching        ((uint32_t)0x00020000)  /* Running - fetching the Rx descriptor */
+  #define ETH_DMASR_RPS_Waiting         ((uint32_t)0x00060000)  /* Running - waiting for packet */
+  #define ETH_DMASR_RPS_Suspended       ((uint32_t)0x00080000)  /* Suspended - Rx Descriptor unavailable */
+  #define ETH_DMASR_RPS_Closing         ((uint32_t)0x000A0000)  /* Running - closing descriptor */
+  #define ETH_DMASR_RPS_Queuing         ((uint32_t)0x000E0000)  /* Running - queuing the recieve frame into host memory */
+#define ETH_DMASR_NIS        ((uint32_t)0x00010000)  /* Normal interrupt summary */
+#define ETH_DMASR_AIS        ((uint32_t)0x00008000)  /* Abnormal interrupt summary */
+#define ETH_DMASR_ERS        ((uint32_t)0x00004000)  /* Early receive status */
+#define ETH_DMASR_FBES       ((uint32_t)0x00002000)  /* Fatal bus error status */
+#define ETH_DMASR_ETS        ((uint32_t)0x00000400)  /* Early transmit status */
+#define ETH_DMASR_RWTS       ((uint32_t)0x00000200)  /* Receive watchdog timeout status */
+#define ETH_DMASR_RPSS       ((uint32_t)0x00000100)  /* Receive process stopped status */
+#define ETH_DMASR_RBUS       ((uint32_t)0x00000080)  /* Receive buffer unavailable status */
+#define ETH_DMASR_RS         ((uint32_t)0x00000040)  /* Receive status */
+#define ETH_DMASR_TUS        ((uint32_t)0x00000020)  /* Transmit underflow status */
+#define ETH_DMASR_ROS        ((uint32_t)0x00000010)  /* Receive overflow status */
+#define ETH_DMASR_TJTS       ((uint32_t)0x00000008)  /* Transmit jabber timeout status */
+#define ETH_DMASR_TBUS       ((uint32_t)0x00000004)  /* Transmit buffer unavailable status */
+#define ETH_DMASR_TPSS       ((uint32_t)0x00000002)  /* Transmit process stopped status */
+#define ETH_DMASR_TS         ((uint32_t)0x00000001)  /* Transmit status */
+
+/* Bit definition for Ethernet DMA Operation Mode Register */
+#define ETH_DMAOMR_DTCEFD    ((uint32_t)0x04000000)  /* Disable Dropping of TCP/IP checksum error frames */
+#define ETH_DMAOMR_RSF       ((uint32_t)0x02000000)  /* Receive store and forward */
+#define ETH_DMAOMR_DFRF      ((uint32_t)0x01000000)  /* Disable flushing of received frames */
+#define ETH_DMAOMR_TSF       ((uint32_t)0x00200000)  /* Transmit store and forward */
+#define ETH_DMAOMR_FTF       ((uint32_t)0x00100000)  /* Flush transmit FIFO */
+#define ETH_DMAOMR_TTC       ((uint32_t)0x0001C000)  /* Transmit threshold control */
+  #define ETH_DMAOMR_TTC_64Bytes       ((uint32_t)0x00000000)  /* threshold level of the MTL Transmit FIFO is 64 Bytes */
+  #define ETH_DMAOMR_TTC_128Bytes      ((uint32_t)0x00004000)  /* threshold level of the MTL Transmit FIFO is 128 Bytes */
+  #define ETH_DMAOMR_TTC_192Bytes      ((uint32_t)0x00008000)  /* threshold level of the MTL Transmit FIFO is 192 Bytes */
+  #define ETH_DMAOMR_TTC_256Bytes      ((uint32_t)0x0000C000)  /* threshold level of the MTL Transmit FIFO is 256 Bytes */
+  #define ETH_DMAOMR_TTC_40Bytes       ((uint32_t)0x00010000)  /* threshold level of the MTL Transmit FIFO is 40 Bytes */
+  #define ETH_DMAOMR_TTC_32Bytes       ((uint32_t)0x00014000)  /* threshold level of the MTL Transmit FIFO is 32 Bytes */
+  #define ETH_DMAOMR_TTC_24Bytes       ((uint32_t)0x00018000)  /* threshold level of the MTL Transmit FIFO is 24 Bytes */
+  #define ETH_DMAOMR_TTC_16Bytes       ((uint32_t)0x0001C000)  /* threshold level of the MTL Transmit FIFO is 16 Bytes */
+#define ETH_DMAOMR_ST        ((uint32_t)0x00002000)  /* Start/stop transmission command */
+#define ETH_DMAOMR_FEF       ((uint32_t)0x00000080)  /* Forward error frames */
+#define ETH_DMAOMR_FUGF      ((uint32_t)0x00000040)  /* Forward undersized good frames */
+#define ETH_DMAOMR_RTC       ((uint32_t)0x00000018)  /* receive threshold control */
+  #define ETH_DMAOMR_RTC_64Bytes       ((uint32_t)0x00000000)  /* threshold level of the MTL Receive FIFO is 64 Bytes */
+  #define ETH_DMAOMR_RTC_32Bytes       ((uint32_t)0x00000008)  /* threshold level of the MTL Receive FIFO is 32 Bytes */
+  #define ETH_DMAOMR_RTC_96Bytes       ((uint32_t)0x00000010)  /* threshold level of the MTL Receive FIFO is 96 Bytes */
+  #define ETH_DMAOMR_RTC_128Bytes      ((uint32_t)0x00000018)  /* threshold level of the MTL Receive FIFO is 128 Bytes */
+#define ETH_DMAOMR_OSF       ((uint32_t)0x00000004)  /* operate on second frame */
+#define ETH_DMAOMR_SR        ((uint32_t)0x00000002)  /* Start/stop receive */
+
+/* Bit definition for Ethernet DMA Interrupt Enable Register */
+#define ETH_DMAIER_NISE      ((uint32_t)0x00010000)  /* Normal interrupt summary enable */
+#define ETH_DMAIER_AISE      ((uint32_t)0x00008000)  /* Abnormal interrupt summary enable */
+#define ETH_DMAIER_ERIE      ((uint32_t)0x00004000)  /* Early receive interrupt enable */
+#define ETH_DMAIER_FBEIE     ((uint32_t)0x00002000)  /* Fatal bus error interrupt enable */
+#define ETH_DMAIER_ETIE      ((uint32_t)0x00000400)  /* Early transmit interrupt enable */
+#define ETH_DMAIER_RWTIE     ((uint32_t)0x00000200)  /* Receive watchdog timeout interrupt enable */
+#define ETH_DMAIER_RPSIE     ((uint32_t)0x00000100)  /* Receive process stopped interrupt enable */
+#define ETH_DMAIER_RBUIE     ((uint32_t)0x00000080)  /* Receive buffer unavailable interrupt enable */
+#define ETH_DMAIER_RIE       ((uint32_t)0x00000040)  /* Receive interrupt enable */
+#define ETH_DMAIER_TUIE      ((uint32_t)0x00000020)  /* Transmit Underflow interrupt enable */
+#define ETH_DMAIER_ROIE      ((uint32_t)0x00000010)  /* Receive Overflow interrupt enable */
+#define ETH_DMAIER_TJTIE     ((uint32_t)0x00000008)  /* Transmit jabber timeout interrupt enable */
+#define ETH_DMAIER_TBUIE     ((uint32_t)0x00000004)  /* Transmit buffer unavailable interrupt enable */
+#define ETH_DMAIER_TPSIE     ((uint32_t)0x00000002)  /* Transmit process stopped interrupt enable */
+#define ETH_DMAIER_TIE       ((uint32_t)0x00000001)  /* Transmit interrupt enable */
+
+/* Bit definition for Ethernet DMA Missed Frame and Buffer Overflow Counter Register */
+#define ETH_DMAMFBOCR_OFOC   ((uint32_t)0x10000000)  /* Overflow bit for FIFO overflow counter */
+#define ETH_DMAMFBOCR_MFA    ((uint32_t)0x0FFE0000)  /* Number of frames missed by the application */
+#define ETH_DMAMFBOCR_OMFC   ((uint32_t)0x00010000)  /* Overflow bit for missed frame counter */
+#define ETH_DMAMFBOCR_MFC    ((uint32_t)0x0000FFFF)  /* Number of frames missed by the controller */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Descriptor Register */
+#define ETH_DMACHTDR_HTDAP   ((uint32_t)0xFFFFFFFF)  /* Host transmit descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Descriptor Register */
+#define ETH_DMACHRDR_HRDAP   ((uint32_t)0xFFFFFFFF)  /* Host receive descriptor address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Transmit Buffer Address Register */
+#define ETH_DMACHTBAR_HTBAP  ((uint32_t)0xFFFFFFFF)  /* Host transmit buffer address pointer */
+
+/* Bit definition for Ethernet DMA Current Host Receive Buffer Address Register */
+#define ETH_DMACHRBAR_HRBAP  ((uint32_t)0xFFFFFFFF)  /* Host receive buffer address pointer */
+#endif /* STM32F10X_CL */
+
+/**
+  * @}
+  */
+
+ /**
+  * @}
+  */ 
+
+#ifdef USE_STDPERIPH_DRIVER
+  #include "stm32f10x_conf.h"
+#endif
+
+/** @addtogroup Exported_macro
+  * @{
+  */
+
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_H */
+
+/**
+  * @}
+  */
+
+  /**
+  * @}
+  */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/USER/stm32f10x_conf.h b/Program/XLLC/USER/stm32f10x_conf.h
new file mode 100644
index 0000000000000000000000000000000000000000..ebccb7e5bb102b64bdc186fb543f6a6c701c3b4d
--- /dev/null
+++ b/Program/XLLC/USER/stm32f10x_conf.h
@@ -0,0 +1,77 @@
+/**
+  ******************************************************************************
+  * @file    GPIO/IOToggle/stm32f10x_conf.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
+#include "stm32f10x_adc.h"
+#include "stm32f10x_bkp.h"
+#include "stm32f10x_can.h"
+#include "stm32f10x_cec.h"
+#include "stm32f10x_crc.h"
+#include "stm32f10x_dac.h"
+#include "stm32f10x_dbgmcu.h"
+#include "stm32f10x_dma.h"
+#include "stm32f10x_exti.h"
+#include "stm32f10x_flash.h"
+#include "stm32f10x_fsmc.h"
+#include "stm32f10x_gpio.h"
+#include "stm32f10x_i2c.h"
+#include "stm32f10x_iwdg.h"
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+#include "stm32f10x_rtc.h"
+#include "stm32f10x_sdio.h"
+#include "stm32f10x_spi.h"
+#include "stm32f10x_tim.h"
+#include "stm32f10x_usart.h"
+#include "stm32f10x_wwdg.h"
+#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function which reports 
+  *         the name of the source file and the source line number of the call 
+  *         that failed. If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F10x_CONF_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/USER/stm32f10x_it.c b/Program/XLLC/USER/stm32f10x_it.c
new file mode 100644
index 0000000000000000000000000000000000000000..b946e800be1908e639cf0f26ad111ad778669995
--- /dev/null
+++ b/Program/XLLC/USER/stm32f10x_it.c
@@ -0,0 +1,87 @@
+/**
+  ******************************************************************************
+  * @file    GPIO/IOToggle/stm32f10x_it.c 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   Main Interrupt Service Routines.
+  *          This file provides template for all exceptions handler and peripherals
+  *          interrupt service routine.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_it.h" 
+
+
+ 
+void NMI_Handler(void)
+{
+}
+ 
+void HardFault_Handler(void)
+{
+  /* Go to infinite loop when Hard Fault exception occurs */
+  while (1)
+  {
+  }
+}
+ 
+void MemManage_Handler(void)
+{
+  /* Go to infinite loop when Memory Manage exception occurs */
+  while (1)
+  {
+  }
+}
+
+ 
+void BusFault_Handler(void)
+{
+  /* Go to infinite loop when Bus Fault exception occurs */
+  while (1)
+  {
+  }
+}
+ 
+void UsageFault_Handler(void)
+{
+  /* Go to infinite loop when Usage Fault exception occurs */
+  while (1)
+  {
+  }
+}
+ 
+//void SVC_Handler(void)
+//{
+//}
+ 
+void DebugMon_Handler(void)
+{
+}
+ 
+//void PendSV_Handler(void)
+//{
+//}
+// 
+//void SysTick_Handler(void)
+//{
+//}
+
+/******************************************************************************/
+/*                 STM32F10x Peripherals Interrupt Handlers                   */
+/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
+/*  available peripheral interrupt handler's name please refer to the startup */
+/*  file (startup_stm32f10x_xx.s).                                            */
+/******************************************************************************/
diff --git a/Program/XLLC/USER/stm32f10x_it.h b/Program/XLLC/USER/stm32f10x_it.h
new file mode 100644
index 0000000000000000000000000000000000000000..696633d5feffb8185da4a74e6e313aba1b7efb55
--- /dev/null
+++ b/Program/XLLC/USER/stm32f10x_it.h
@@ -0,0 +1,46 @@
+/**
+  ******************************************************************************
+  * @file    GPIO/IOToggle/stm32f10x_it.h 
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IT_H
+#define __STM32F10x_IT_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#endif /* __STM32F10x_IT_H */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/USER/system_stm32f10x.c b/Program/XLLC/USER/system_stm32f10x.c
new file mode 100644
index 0000000000000000000000000000000000000000..c131ee85bc08a8ef6d9b9d19e01f6d9aaaa0d3db
--- /dev/null
+++ b/Program/XLLC/USER/system_stm32f10x.c
@@ -0,0 +1,1094 @@
+/**
+  ******************************************************************************
+  * @file    GPIO/IOToggle/system_stm32f10x.c
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    08-April-2011
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  * 
+  * 1.  This file provides two functions and one global variable to be called from 
+  *     user application:
+  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
+  *                      factors, AHB/APBx prescalers and Flash settings). 
+  *                      This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f10x_xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  * 2. After each device reset the HSI (8 MHz) is used as system clock source.
+  *    Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to
+  *    configure the system clock before to branch to main program.
+  *
+  * 3. If the system clock source selected by user fails to startup, the SystemInit()
+  *    function will do nothing and HSI still used as system clock source. User can 
+  *    add some code to deal with this issue inside the SetSysClock() function.
+  *
+  * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on
+  *    the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. 
+  *    When HSE is used as system clock source, directly or through PLL, and you
+  *    are using different crystal you have to adapt the HSE value to your own
+  *    configuration.
+  *        
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F10x_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f10x.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Defines
+  * @{
+  */
+
+/*!< Uncomment the line corresponding to the desired System clock (SYSCLK)
+   frequency (after reset the HSI is used as SYSCLK source)
+   
+   IMPORTANT NOTE:
+   ============== 
+   1. After each device reset the HSI is used as System clock source.
+
+   2. Please make sure that the selected System clock doesn't exceed your device's
+      maximum frequency.
+      
+   3. If none of the define below is enabled, the HSI is used as System clock
+    source.
+
+   4. The System clock configuration functions provided within this file assume that:
+        - For Low, Medium and High density Value line devices an external 8MHz 
+          crystal is used to drive the System clock.
+        - For Low, Medium and High density devices an external 8MHz crystal is
+          used to drive the System clock.
+        - For Connectivity line devices an external 25MHz crystal is used to drive
+          the System clock.
+     If you are using different crystal you have to adapt those functions accordingly.
+    */
+    
+#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+ #define SYSCLK_FREQ_24MHz  24000000
+#else
+/* #define SYSCLK_FREQ_HSE    HSE_VALUE */
+/* #define SYSCLK_FREQ_24MHz  24000000 */ 
+/* #define SYSCLK_FREQ_36MHz  36000000 */
+/* #define SYSCLK_FREQ_48MHz  48000000 */
+/* #define SYSCLK_FREQ_56MHz  56000000 */
+#define SYSCLK_FREQ_72MHz  72000000
+#endif
+
+/*!< Uncomment the following line if you need to use external SRAM mounted
+     on STM3210E-EVAL board (STM32 High density and XL-density devices) or on 
+     STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ 
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+/* #define DATA_IN_ExtSRAM */
+#endif
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */ 
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x0 /*!< Vector Table base offset field. 
+                                  This value must be a multiple of 0x200. */
+
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Variables
+  * @{
+  */
+
+/*******************************************************************************
+*  Clock Definitions
+*******************************************************************************/
+#ifdef SYSCLK_FREQ_HSE
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_HSE;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_24MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_24MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_36MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_36MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_48MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_48MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_56MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_56MHz;        /*!< System Clock Frequency (Core Clock) */
+#elif defined SYSCLK_FREQ_72MHz
+  uint32_t SystemCoreClock         = SYSCLK_FREQ_72MHz;        /*!< System Clock Frequency (Core Clock) */
+#else /*!< HSI Selected as System Clock source */
+  uint32_t SystemCoreClock         = HSI_VALUE;        /*!< System Clock Frequency (Core Clock) */
+#endif
+
+__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_FunctionPrototypes
+  * @{
+  */
+
+static void SetSysClock(void);
+
+#ifdef SYSCLK_FREQ_HSE
+  static void SetSysClockToHSE(void);
+#elif defined SYSCLK_FREQ_24MHz
+  static void SetSysClockTo24(void);
+#elif defined SYSCLK_FREQ_36MHz
+  static void SetSysClockTo36(void);
+#elif defined SYSCLK_FREQ_48MHz
+  static void SetSysClockTo48(void);
+#elif defined SYSCLK_FREQ_56MHz
+  static void SetSysClockTo56(void);  
+#elif defined SYSCLK_FREQ_72MHz
+  static void SetSysClockTo72(void);
+#endif
+
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemCoreClock variable.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+void SystemInit (void)
+{
+  /* Reset the RCC clock configuration to the default reset state(for debug purpose) */
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */
+#ifndef STM32F10X_CL
+  RCC->CFGR &= (uint32_t)0xF8FF0000;
+#else
+  RCC->CFGR &= (uint32_t)0xF0FF0000;
+#endif /* STM32F10X_CL */   
+  
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */
+  RCC->CFGR &= (uint32_t)0xFF80FFFF;
+
+#ifdef STM32F10X_CL
+  /* Reset PLL2ON and PLL3ON bits */
+  RCC->CR &= (uint32_t)0xEBFFFFFF;
+
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x00FF0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+
+  /* Reset CFGR2 register */
+  RCC->CFGR2 = 0x00000000;      
+#else
+  /* Disable all interrupts and clear pending bits  */
+  RCC->CIR = 0x009F0000;
+#endif /* STM32F10X_CL */
+    
+#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL)
+  #ifdef DATA_IN_ExtSRAM
+    SystemInit_ExtMemCtl(); 
+  #endif /* DATA_IN_ExtSRAM */
+#endif 
+
+  /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */
+  /* Configure the Flash Latency cycles and enable prefetch buffer */
+  SetSysClock();
+
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */
+#endif 
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
+  *             8 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
+  *              8 MHz or 25 MHz, depedning on the product used), user has to ensure
+  *              that HSE_VALUE is same as the real frequency of the crystal used.
+  *              Otherwise, this function may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate (void)
+{
+  uint32_t tmp = 0, pllmull = 0, pllsource = 0;
+
+#ifdef  STM32F10X_CL
+  uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0;
+#endif /* STM32F10X_CL */
+
+#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+  uint32_t prediv1factor = 0;
+#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */
+    
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+  
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock */
+
+      /* Get PLL clock source and multiplication factor ----------------------*/
+      pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
+      pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
+      
+#ifndef STM32F10X_CL      
+      pllmull = ( pllmull >> 18) + 2;
+      
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {
+ #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL)
+       prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+       /* HSE oscillator clock selected as PREDIV1 clock entry */
+       SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; 
+ #else
+        /* HSE selected as PLL clock entry */
+        if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
+        {/* HSE oscillator clock divided by 2 */
+          SystemCoreClock = (HSE_VALUE >> 1) * pllmull;
+        }
+        else
+        {
+          SystemCoreClock = HSE_VALUE * pllmull;
+        }
+ #endif
+      }
+#else
+      pllmull = pllmull >> 18;
+      
+      if (pllmull != 0x0D)
+      {
+         pllmull += 2;
+      }
+      else
+      { /* PLL multiplication factor = PLL input clock * 6.5 */
+        pllmull = 13 / 2; 
+      }
+            
+      if (pllsource == 0x00)
+      {
+        /* HSI oscillator clock divided by 2 selected as PLL clock entry */
+        SystemCoreClock = (HSI_VALUE >> 1) * pllmull;
+      }
+      else
+      {/* PREDIV1 selected as PLL clock entry */
+        
+        /* Get PREDIV1 clock source and division factor */
+        prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
+        prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1;
+        
+        if (prediv1source == 0)
+        { 
+          /* HSE oscillator clock selected as PREDIV1 clock entry */
+          SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;          
+        }
+        else
+        {/* PLL2 clock selected as PREDIV1 clock entry */
+          
+          /* Get PREDIV2 division factor and PLL2 multiplication factor */
+          prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1;
+          pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; 
+          SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;                         
+        }
+      }
+#endif /* STM32F10X_CL */ 
+      break;
+
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  
+  /* Compute HCLK clock frequency ----------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK clock frequency */
+  SystemCoreClock >>= tmp;  
+}
+
+/**
+  * @brief  Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClock(void)
+{
+#ifdef SYSCLK_FREQ_HSE
+  SetSysClockToHSE();
+#elif defined SYSCLK_FREQ_24MHz
+  SetSysClockTo24();
+#elif defined SYSCLK_FREQ_36MHz
+  SetSysClockTo36();
+#elif defined SYSCLK_FREQ_48MHz
+  SetSysClockTo48();
+#elif defined SYSCLK_FREQ_56MHz
+  SetSysClockTo56();  
+#elif defined SYSCLK_FREQ_72MHz
+  SetSysClockTo72();
+#endif
+ 
+ /* If none of the define above is enabled, the HSI is used as System clock
+    source (default after reset) */ 
+}
+
+/**
+  * @brief  Setup the external memory controller. Called in startup_stm32f10x.s 
+  *          before jump to __main
+  * @param  None
+  * @retval None
+  */ 
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller. 
+  *         Called in startup_stm32f10x_xx.s/.c before jump to main.
+  * 	      This function configures the external SRAM mounted on STM3210E-EVAL
+  *         board (STM32 High density devices). This SRAM will be used as program
+  *         data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */ 
+void SystemInit_ExtMemCtl(void) 
+{
+/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is 
+  required, then adjust the Register Addresses */
+
+  /* Enable FSMC clock */
+  RCC->AHBENR = 0x00000114;
+  
+  /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */  
+  RCC->APB2ENR = 0x000001E0;
+  
+/* ---------------  SRAM Data lines, NOE and NWE configuration ---------------*/
+/*----------------  SRAM Address lines configuration -------------------------*/
+/*----------------  NOE and NWE configuration --------------------------------*/  
+/*----------------  NE3 configuration ----------------------------------------*/
+/*----------------  NBL0, NBL1 configuration ---------------------------------*/
+  
+  GPIOD->CRL = 0x44BB44BB;  
+  GPIOD->CRH = 0xBBBBBBBB;
+
+  GPIOE->CRL = 0xB44444BB;  
+  GPIOE->CRH = 0xBBBBBBBB;
+
+  GPIOF->CRL = 0x44BBBBBB;  
+  GPIOF->CRH = 0xBBBB4444;
+
+  GPIOG->CRL = 0x44BBBBBB;  
+  GPIOG->CRH = 0x44444B44;
+   
+/*----------------  FSMC Configuration ---------------------------------------*/  
+/*----------------  Enable FSMC Bank1_SRAM Bank ------------------------------*/
+  
+  FSMC_Bank1->BTCR[4] = 0x00001011;
+  FSMC_Bank1->BTCR[5] = 0x00000200;
+}
+#endif /* DATA_IN_ExtSRAM */
+
+#ifdef SYSCLK_FREQ_HSE
+/**
+  * @brief  Selects HSE as System clock source and configure HCLK, PCLK2
+  *          and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockToHSE(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+
+#ifndef STM32F10X_CL
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+#else
+    if (HSE_VALUE <= 24000000)
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;
+	}
+	else
+	{
+      FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;
+	}
+#endif /* STM32F10X_CL */
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+    /* Select HSE as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE;    
+
+    /* Wait till HSE is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }  
+}
+#elif defined SYSCLK_FREQ_24MHz
+/**
+  * @brief  Sets System clock frequency to 24MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers.
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo24(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL 
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 0 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0;    
+#endif
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */       
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }   
+#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL)
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6);
+#else    
+    /*  PLL configuration:  = (HSE / 2) * 6 = 24 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_36MHz
+/**
+  * @brief  Sets System clock frequency to 36MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo36(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+
+	/*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+#else    
+    /*  PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+#elif defined SYSCLK_FREQ_48MHz
+/**
+  * @brief  Sets System clock frequency to 48MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo48(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 1 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+    
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL6); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 6 = 48 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_56MHz
+/**
+  * @brief  Sets System clock frequency to 56MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo56(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/   
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL7); 
+#else     
+    /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7);
+
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  } 
+}
+
+#elif defined SYSCLK_FREQ_72MHz
+/**
+  * @brief  Sets System clock frequency to 72MHz and configure HCLK, PCLK2 
+  *          and PCLK1 prescalers. 
+  * @note   This function should be used only after reset.
+  * @param  None
+  * @retval None
+  */
+static void SetSysClockTo72(void)
+{
+  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;
+  
+  /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/    
+  /* Enable HSE */    
+  RCC->CR |= ((uint32_t)RCC_CR_HSEON);
+ 
+  /* Wait till HSE is ready and if Time out is reached exit */
+  do
+  {
+    HSEStatus = RCC->CR & RCC_CR_HSERDY;
+    StartUpCounter++;  
+  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));
+
+  if ((RCC->CR & RCC_CR_HSERDY) != RESET)
+  {
+    HSEStatus = (uint32_t)0x01;
+  }
+  else
+  {
+    HSEStatus = (uint32_t)0x00;
+  }  
+
+  if (HSEStatus == (uint32_t)0x01)
+  {
+    /* Enable Prefetch Buffer */
+    FLASH->ACR |= FLASH_ACR_PRFTBE;
+
+    /* Flash 2 wait state */
+    FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY);
+    FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2;    
+
+ 
+    /* HCLK = SYSCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1;
+      
+    /* PCLK2 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1;
+    
+    /* PCLK1 = HCLK */
+    RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2;
+
+#ifdef STM32F10X_CL
+    /* Configure PLLs ------------------------------------------------------*/
+    /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */
+    /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */
+        
+    RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL |
+                              RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC);
+    RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 |
+                             RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5);
+  
+    /* Enable PLL2 */
+    RCC->CR |= RCC_CR_PLL2ON;
+    /* Wait till PLL2 is ready */
+    while((RCC->CR & RCC_CR_PLL2RDY) == 0)
+    {
+    }
+    
+   
+    /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ 
+    RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL);
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | 
+                            RCC_CFGR_PLLMULL9); 
+#else    
+    /*  PLL configuration: PLLCLK = HSE * 9 = 72 MHz */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE |
+                                        RCC_CFGR_PLLMULL));
+    RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9);
+#endif /* STM32F10X_CL */
+
+    /* Enable PLL */
+    RCC->CR |= RCC_CR_PLLON;
+
+    /* Wait till PLL is ready */
+    while((RCC->CR & RCC_CR_PLLRDY) == 0)
+    {
+    }
+    
+    /* Select PLL as system clock source */
+    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));
+    RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL;    
+
+    /* Wait till PLL is used as system clock source */
+    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08)
+    {
+    }
+  }
+  else
+  { /* If HSE fails to start-up, the application will have wrong clock 
+         configuration. User can add here some code to deal with this error */
+  }
+}
+#endif
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */    
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/USER/system_stm32f10x.h b/Program/XLLC/USER/system_stm32f10x.h
new file mode 100644
index 0000000000000000000000000000000000000000..739f33283e5a64b1913a5476d430ba11a8bbbd4e
--- /dev/null
+++ b/Program/XLLC/USER/system_stm32f10x.h
@@ -0,0 +1,98 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f10x.h
+  * @author  MCD Application Team
+  * @version V3.5.0
+  * @date    11-March-2011
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
+  ******************************************************************************
+  * @attention
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * 
    © COPYRIGHT 2011 STMicroelectronics
    
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f10x_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F10X_H
+#define __SYSTEM_STM32F10X_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F10x_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F10x_System_Exported_types
+  * @{
+  */
+
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F10x_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F10X_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/Program/XLLC/keilkilll.bat b/Program/XLLC/keilkilll.bat
new file mode 100644
index 0000000000000000000000000000000000000000..1d37d16e9df70e2b5edeb9276e6b213ef0148890
--- /dev/null
+++ b/Program/XLLC/keilkilll.bat
@@ -0,0 +1,27 @@
+del *.bak /s
+del *.ddk /s
+del *.edk /s
+del *.lst /s
+del *.lnp /s
+del *.mpf /s
+del *.mpj /s
+del *.obj /s
+del *.omf /s
+::del *.opt /s  ::²»ÔÊÐíɾ³ýJLINKµÄÉèÖÃ
+del *.plg /s
+del *.rpt /s
+del *.tmp /s
+del *.__i /s
+del *.crf /s
+del *.o /s
+del *.d /s
+del *.axf /s
+del *.tra /s
+del *.dep /s           
+del JLinkLog.txt /s
+
+del *.iex /s
+del *.htm /s
+del *.sct /s
+del *.map /s
+exit