1 Star 1 Fork 0

安装通/SQLAdvisor

加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
文件
克隆/下载
CMakeLists.txt 18.63 KB
一键复制 编辑 原始数据 按行查看 历史
坚守 提交于 2017-03-06 15:34 . 初始化sqladvisor
# Copyright (c) 2006, 2014, Oracle and/or its affiliates. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
# Avoid warnings in higher versions
if("${CMAKE_MAJOR_VERSION}.${CMAKE_MINOR_VERSION}" GREATER 2.6)
CMAKE_POLICY(VERSION 2.8)
endif()
# We use PROPERTIES LINK_INTERFACE_LIBRARIES. See cmake --help-policy CMP0022
IF(CMAKE_VERSION VERSION_EQUAL "2.8.12" OR
CMAKE_VERSION VERSION_GREATER "2.8.12")
CMAKE_POLICY(SET CMP0022 OLD)
ENDIF()
# We use the LOCATION target property (CMP0026)
# and get_target_property() for non-existent targets (CMP0045)
# and INSTALL_NAME_DIR (CMP0042)
IF(CMAKE_VERSION VERSION_EQUAL "3.0.0" OR
CMAKE_VERSION VERSION_GREATER "3.0.0")
CMAKE_POLICY(SET CMP0026 OLD)
CMAKE_POLICY(SET CMP0045 OLD)
CMAKE_POLICY(SET CMP0042 OLD)
ENDIF()
MESSAGE(STATUS "Running cmake version ${CMAKE_VERSION}")
# Will set GIT_EXECUTABLE and GIT_FOUND
FIND_PACKAGE(Git)
SET(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_SOURCE_DIR}/cmake)
# First, decide about build type (debug or release)
# If custom compiler flags are set or cmake is invoked with -DCMAKE_BUILD_TYPE,
# respect user wishes and do not (re)define CMAKE_BUILD_TYPE. If WITH_DEBUG{_FULL}
# is given, set CMAKE_BUILD_TYPE = Debug. Otherwise, use Relwithdebinfo.
IF(DEFINED CMAKE_BUILD_TYPE)
SET(HAVE_CMAKE_BUILD_TYPE TRUE)
ENDIF()
SET(CUSTOM_C_FLAGS $ENV{CFLAGS})
OPTION(WITH_DEBUG "Use dbug/safemutex" OFF)
# Distinguish between community and non-community builds, with the
# default being a community build. This does not impact the feature
# set that will be compiled in; it's merely provided as a hint to
# custom packaging steps.
OPTION(COMMUNITY_BUILD "Set to true if this is a community build" ON)
# Use a default manufacturer if no manufacturer was identified.
SET(MANUFACTURER_DOCSTRING
"Set the entity that appears as the manufacturer of packages that support a manufacturer field.")
IF(NOT DEFINED MANUFACTURER)
SET(MANUFACTURER "Built from Source" CACHE STRING ${MANUFACTURER_DOCSTRING})
MARK_AS_ADVANCED(MANUFACTURER)
ENDIF()
#PAM build Handling
OPTION(WITH_PAM "Build with Percona PAM plugin" OFF)
# We choose to provide WITH_DEBUG as alias to standard CMAKE_BUILD_TYPE=Debug
# which turns out to be not trivial, as this involves synchronization
# between CMAKE_BUILD_TYPE and WITH_DEBUG. Besides, we have to deal with cases
# where WITH_DEBUG is reset from ON to OFF and here we need to reset
# CMAKE_BUILD_TYPE to either none or default RelWithDebInfo
SET(BUILDTYPE_DOCSTRING
"Choose the type of build, options are: None(CMAKE_CXX_FLAGS or
CMAKE_C_FLAGS used) Debug Release RelWithDebInfo MinSizeRel")
IF(WITH_DEBUG)
SET(CMAKE_BUILD_TYPE "Debug" CACHE STRING ${BUILDTYPE_DOCSTRING} FORCE)
IF(UNIX AND NOT APPLE)
# Compiling with PIC speeds up embedded build, on PIC sensitive systems
# Predefine it to ON, in case user chooses to build embedded.
SET(WITH_PIC ON CACHE BOOL "Compile with PIC")
ENDIF()
SET(OLD_WITH_DEBUG 1 CACHE INTERNAL "" FORCE)
ELSEIF(NOT HAVE_CMAKE_BUILD_TYPE OR OLD_WITH_DEBUG)
IF(CUSTOM_C_FLAGS)
SET(CMAKE_BUILD_TYPE "" CACHE STRING ${BUILDTYPE_DOCSTRING} FORCE)
ELSE(CMAKE_BUILD_TYPE MATCHES "Debug" OR NOT HAVE_CMAKE_BUILD_TYPE)
SET(CMAKE_BUILD_TYPE "RelWithDebInfo" CACHE STRING
${BUILDTYPE_DOCSTRING} FORCE)
ENDIF()
SET(OLD_WITH_DEBUG 0 CACHE INTERNAL "" FORCE)
ENDIF()
# Optionally set project name, e.g.
# foo.xcodeproj (mac) or foo.sln (windows)
SET(MYSQL_PROJECT_NAME_DOCSTRING "MySQL project name")
IF(DEFINED MYSQL_PROJECT_NAME)
SET(MYSQL_PROJECT_NAME ${MYSQL_PROJECT_NAME} CACHE STRING
${MYSQL_PROJECT_NAME_DOCSTRING} FORCE)
ELSE()
SET(MYSQL_PROJECT_NAME "MySQL" CACHE STRING
${MYSQL_PROJECT_NAME_DOCSTRING} FORCE)
MARK_AS_ADVANCED(MYSQL_PROJECT_NAME)
ENDIF()
PROJECT(${MYSQL_PROJECT_NAME})
# Maintainer mode is default on only for Linux debug builds using GCC/G++
IF(CMAKE_BUILD_TYPE MATCHES "Debug" OR WITH_DEBUG)
IF(CMAKE_SYSTEM_NAME MATCHES "Linux" AND
CMAKE_COMPILER_IS_GNUCC AND CMAKE_COMPILER_IS_GNUCXX)
SET(MYSQL_MAINTAINER_MODE ON CACHE BOOL
"MySQL maintainer-specific development environment")
ENDIF()
ENDIF()
OPTION(WITH_DEFAULT_COMPILER_OPTIONS
"Use flags from cmake/build_configurations/compiler_options.cmake"
ON)
OPTION(WITH_DEFAULT_FEATURE_SET
"Use feature set in cmake/build_configurations/feature_set.cmake"
ON)
IF(BUILD_CONFIG)
INCLUDE(
${CMAKE_SOURCE_DIR}/cmake/build_configurations/${BUILD_CONFIG}.cmake)
ENDIF()
#cmake on 64bit windows/mac/solaris doesn't set CMAKE_SYSTEM_PROCESSOR correctly
SET(MYSQL_MACHINE_TYPE ${CMAKE_SYSTEM_PROCESSOR})
# Include the platform-specific file. To allow exceptions, this code
# looks for files in order of how specific they are. If there is, for
# example, a generic Linux.cmake and a version-specific
# Linux-2.6.28-11-generic, it will pick Linux-2.6.28-11-generic and
# include it. It is then up to the file writer to include the generic
# version if necessary.
FOREACH(_base
${CMAKE_SYSTEM_NAME}-${CMAKE_SYSTEM_VERSION}-${CMAKE_SYSTEM_PROCESSOR}
${CMAKE_SYSTEM_NAME}-${CMAKE_SYSTEM_VERSION}
${CMAKE_SYSTEM_NAME})
SET(_file ${CMAKE_SOURCE_DIR}/cmake/os/${_base}.cmake)
IF(EXISTS ${_file})
INCLUDE(${_file})
BREAK()
ENDIF()
ENDFOREACH()
IF(UNIX)
OPTION(WITH_INNODB_MEMCACHED "" OFF)
OPTION(ENABLE_MEMCACHED_SASL "Enable SASL on InnoDB Memcached" OFF)
OPTION(ENABLE_MEMCACHED_SASL_PWDB "Enable SASL on InnoDB Memcached" OFF)
ELSE()
OPTION(WITH_INNODB_MEMCACHED "" OFF)
ENDIF()
# Following autotools tradition, add preprocessor definitions
# specified in environment variable CPPFLAGS
IF(DEFINED ENV{CPPFLAGS})
ADD_DEFINITIONS($ENV{CPPFLAGS})
ENDIF()
INCLUDE(CheckTypeSize)
CHECK_TYPE_SIZE("void *" SIZEOF_VOIDP)
IF(WITH_DEFAULT_COMPILER_OPTIONS)
INCLUDE(${CMAKE_SOURCE_DIR}/cmake/build_configurations/compiler_options.cmake)
ENDIF()
IF(WITH_DEFAULT_FEATURE_SET)
INCLUDE(${CMAKE_SOURCE_DIR}/cmake/build_configurations/feature_set.cmake)
ENDIF()
# Add macros
INCLUDE(character_sets)
INCLUDE(cpu_info)
INCLUDE(zlib)
INCLUDE(ssl)
INCLUDE(readline)
INCLUDE(mysql_version)
INCLUDE(libutils)
INCLUDE(dtrace)
INCLUDE(plugin)
INCLUDE(install_macros)
INCLUDE(install_layout)
INCLUDE(mysql_add_executable)
# Handle options
OPTION(DISABLE_SHARED
"Don't build shared libraries, compile code as position-dependent" OFF)
IF(DISABLE_SHARED)
SET(WITHOUT_DYNAMIC_PLUGINS 1)
ENDIF()
OPTION(ENABLED_PROFILING "Enable profiling" ON)
OPTION(ENABLE_DTRACE "Include support for DTrace probes" OFF)
OPTION(CYBOZU "" OFF)
OPTION(BACKUP_TEST "" OFF)
OPTION(WITHOUT_SERVER OFF)
IF(UNIX)
OPTION(WITH_VALGRIND "Valgrind instrumentation" OFF)
ENDIF()
IF(NOT WITHOUT_SERVER)
OPTION (WITH_UNIT_TESTS "Compile MySQL with unit tests" ON)
ENDIF()
MARK_AS_ADVANCED(CYBOZU BACKUP_TEST WITHOUT_SERVER DISABLE_SHARED)
include(CheckCSourceCompiles)
include(CheckCXXSourceCompiles)
# We need some extra FAIL_REGEX patterns
# Note that CHECK_C_SOURCE_COMPILES is a misnomer, it will also link.
MACRO (MY_CHECK_C_COMPILER_FLAG FLAG RESULT)
SET(SAVE_CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS}")
SET(CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS} ${FLAG}")
CHECK_C_SOURCE_COMPILES("int main(void) { return 0; }" ${RESULT}
FAIL_REGEX "argument unused during compilation"
FAIL_REGEX "unsupported .*option"
FAIL_REGEX "unknown .*option"
FAIL_REGEX "unrecognized .*option"
FAIL_REGEX "ignoring unknown option"
FAIL_REGEX "[Ww]arning: [Oo]ption"
)
SET(CMAKE_REQUIRED_FLAGS "${SAVE_CMAKE_REQUIRED_FLAGS}")
ENDMACRO()
MACRO (MY_CHECK_CXX_COMPILER_FLAG FLAG RESULT)
SET(SAVE_CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS}")
SET(CMAKE_REQUIRED_FLAGS "${CMAKE_REQUIRED_FLAGS} ${FLAG}")
CHECK_CXX_SOURCE_COMPILES("int main(void) { return 0; }" ${RESULT}
FAIL_REGEX "argument unused during compilation"
FAIL_REGEX "unsupported .*option"
FAIL_REGEX "unknown .*option"
FAIL_REGEX "unrecognized .*option"
FAIL_REGEX "ignoring unknown option"
FAIL_REGEX "[Ww]arning: [Oo]ption"
)
SET(CMAKE_REQUIRED_FLAGS "${SAVE_CMAKE_REQUIRED_FLAGS}")
ENDMACRO()
OPTION(WITH_ASAN "Enable address sanitizer" OFF)
IF (WITH_ASAN)
# gcc 4.8.1 and new versions of clang
MY_CHECK_C_COMPILER_FLAG("-fsanitize=address" HAVE_C_FSANITIZE)
MY_CHECK_CXX_COMPILER_FLAG("-fsanitize=address" HAVE_CXX_FSANITIZE)
IF(HAVE_C_FSANITIZE AND HAVE_CXX_FSANITIZE)
# We switch on basic optimization also for debug builds.
# With optimization we may get some warnings, so we switch off -Werror
SET(CMAKE_C_FLAGS_DEBUG
"${CMAKE_C_FLAGS_DEBUG} -fsanitize=address -O1 -Wno-error -fPIC")
SET(CMAKE_C_FLAGS_RELWITHDEBINFO
"${CMAKE_C_FLAGS_RELWITHDEBINFO} -fsanitize=address -fPIC")
SET(CMAKE_CXX_FLAGS_DEBUG
"${CMAKE_CXX_FLAGS_DEBUG} -fsanitize=address -O1 -Wno-error -fPIC")
SET(CMAKE_CXX_FLAGS_RELWITHDEBINFO
"${CMAKE_CXX_FLAGS_RELWITHDEBINFO} -fsanitize=address -fPIC")
SET(WITH_ASAN_OK 1)
ELSE()
# older versions of clang
MY_CHECK_C_COMPILER_FLAG("-faddress-sanitizer" HAVE_C_FADDRESS)
MY_CHECK_CXX_COMPILER_FLAG("-faddress-sanitizer" HAVE_CXX_FFADDRESS)
IF(HAVE_C_FADDRESS AND HAVE_CXX_FFADDRESS)
# We switch on basic optimization also for debug builds.
SET(CMAKE_C_FLAGS_DEBUG
"${CMAKE_C_FLAGS_DEBUG} -faddress-sanitizer -O1 -fPIC")
SET(CMAKE_C_FLAGS_RELWITHDEBINFO
"${CMAKE_C_FLAGS_RELWITHDEBINFO} -faddress-sanitizer -fPIC")
SET(CMAKE_CXX_FLAGS_DEBUG
"${CMAKE_CXX_FLAGS_DEBUG} -faddress-sanitizer -O1 -fPIC")
SET(CMAKE_CXX_FLAGS_RELWITHDEBINFO
"${CMAKE_CXX_FLAGS_RELWITHDEBINFO} -faddress-sanitizer -fPIC")
SET(WITH_ASAN_OK 1)
ENDIF()
ENDIF()
IF(NOT WITH_ASAN_OK)
MESSAGE(FATAL_ERROR "Do not know how to enable address sanitizer")
ENDIF()
ENDIF()
OPTION(ENABLE_DEBUG_SYNC "Enable debug sync (debug builds only)" ON)
IF(ENABLE_DEBUG_SYNC)
SET(CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} -DENABLED_DEBUG_SYNC")
SET(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} -DENABLED_DEBUG_SYNC")
ENDIF()
# Older versions of ccache must be disabled: export CCACHE_DISABLE=1
# See http://www.cmake.org/Wiki/CTest/Coverage
OPTION(ENABLE_GCOV "Enable gcov (debug, Linux builds only)" OFF)
IF (ENABLE_GCOV AND NOT WIN32 AND NOT APPLE)
SET(CMAKE_CXX_FLAGS_DEBUG
"${CMAKE_CXX_FLAGS_DEBUG} -fprofile-arcs -ftest-coverage -DHAVE_GCOV")
SET(CMAKE_C_FLAGS_DEBUG
"${CMAKE_C_FLAGS_DEBUG} -fprofile-arcs -ftest-coverage -DHAVE_GCOV")
SET(CMAKE_EXE_LINKER_FLAGS_DEBUG
"${CMAKE_EXE_LINKER_FLAGS_DEBUG} -fprofile-arcs -ftest-coverage -lgcov")
ENDIF()
OPTION(ENABLE_GPROF "Enable gprof (optimized, Linux builds only)" OFF)
IF (ENABLE_GPROF AND NOT WIN32 AND NOT APPLE)
SET(CMAKE_C_FLAGS_RELWITHDEBINFO
"${CMAKE_C_FLAGS_RELWITHDEBINFO} -pg")
SET(CMAKE_CXX_FLAGS_RELWITHDEBINFO
"${CMAKE_CXX_FLAGS_RELWITHDEBINFO} -pg")
SET(CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO
"${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO} -pg")
ENDIF()
OPTION(ENABLED_LOCAL_INFILE
"If we should should enable LOAD DATA LOCAL by default" ${IF_WIN})
MARK_AS_ADVANCED(ENABLED_LOCAL_INFILE)
OPTION(WITH_FAST_MUTEXES "Compile with fast mutexes" OFF)
MARK_AS_ADVANCED(WITH_FAST_MUTEXES)
OPTION(OPTIMIZER_TRACE "Support tracing of Optimizer" ON)
OPTION(INNODB_COMPILER_HINTS "Compile InnoDB with compiler hints" ON)
MARK_AS_ADVANCED(INNODB_COMPILER_HINTS)
OPTION(INNODB_PAGE_ATOMIC_REF_COUNT "Use atomics for the page reference count"
ON)
MARK_AS_ADVANCED(INNODB_PAGE_ATOMIC_REF_COUNT)
IF (NOT MAX_INDEXES)
SET(MAX_INDEXES 64)
ENDIF()
SET(MAX_INDEXES ${MAX_INDEXES} CACHE STRING "Sets the maximum number of indexes per table, default 64")
# Set DBUG_OFF and other optional release-only flags for non-debug project types
FOREACH(BUILD_TYPE RELEASE RELWITHDEBINFO MINSIZEREL)
FOREACH(LANG C CXX)
SET(CMAKE_${LANG}_FLAGS_${BUILD_TYPE}
"${CMAKE_${LANG}_FLAGS_${BUILD_TYPE}} -DDBUG_OFF")
IF(WITH_FAST_MUTEXES)
SET(CMAKE_${LANG}_FLAGS_${BUILD_TYPE}
"${CMAKE_${LANG}_FLAGS_${BUILD_TYPE}} -DMY_PTHREAD_FASTMUTEX=1")
ENDIF()
ENDFOREACH()
ENDFOREACH()
IF(NOT CMAKE_BUILD_TYPE
AND NOT CMAKE_GENERATOR MATCHES "Visual Studio"
AND NOT CMAKE_GENERATOR MATCHES "Xcode")
# This is the case of no CMAKE_BUILD_TYPE choosen, typical for VS and Xcode
# or if custom C flags are set. In VS and Xcode for non-Debug configurations
# DBUG_OFF is already correctly set. Use DBUG_OFF for Makefile based projects
# without build type too, unless user specifically requests DBUG.
IF(NOT CMAKE_C_FLAGS MATCHES "-DDBUG_ON")
ADD_DEFINITIONS(-DDBUG_OFF)
ENDIF()
ENDIF()
# Add safemutex for debug configurations, except on Windows
# (safemutex has never worked on Windows)
IF(WITH_DEBUG AND NOT WIN32 AND NOT WITH_INNODB_MEMCACHED)
FOREACH(LANG C CXX)
SET(CMAKE_${LANG}_FLAGS_DEBUG
"${CMAKE_${LANG}_FLAGS_DEBUG} -DSAFE_MUTEX")
ENDFOREACH()
ENDIF()
# Set commonly used variables
IF(WIN32)
SET(DEFAULT_MYSQL_HOME "C:/Program Files/MySQL/MySQL Server ${MYSQL_BASE_VERSION}" )
SET(SHAREDIR share)
ELSE()
SET(DEFAULT_MYSQL_HOME ${CMAKE_INSTALL_PREFIX})
SET(SHAREDIR ${DEFAULT_MYSQL_HOME}/${INSTALL_MYSQLSHAREDIR})
ENDIF()
SET(DEFAULT_BASEDIR "${DEFAULT_MYSQL_HOME}")
IF(INSTALL_MYSQLDATADIR MATCHES "^/.*")
SET(MYSQL_DATADIR ${INSTALL_MYSQLDATADIR} CACHE PATH "default MySQL data directory")
ELSE()
SET(MYSQL_DATADIR "${DEFAULT_MYSQL_HOME}/${INSTALL_MYSQLDATADIR}" CACHE PATH "default MySQL data directory")
ENDIF()
SET(DEFAULT_CHARSET_HOME "${DEFAULT_MYSQL_HOME}")
SET(PLUGINDIR "${DEFAULT_MYSQL_HOME}/${INSTALL_PLUGINDIR}")
IF(SYSCONFDIR)
SET(DEFAULT_SYSCONFDIR "${SYSCONFDIR}")
ENDIF()
SET(TMPDIR "P_tmpdir"
CACHE PATH
"PATH to MySQL TMP dir. Defaults to the P_tmpdir macro in <stdio.h>")
IF(TMPDIR STREQUAL "P_tmpdir")
# Do not quote it, to refer to the P_tmpdir macro.
SET(DEFAULT_TMPDIR "P_tmpdir")
ELSE()
# Quote it, to make it a const char string.
SET(DEFAULT_TMPDIR "\"${TMPDIR}\"")
ENDIF()
# Run platform tests
INCLUDE(configure.cmake)
# Common defines and includes
ADD_DEFINITIONS(-DHAVE_CONFIG_H)
INCLUDE_DIRECTORIES(${CMAKE_CURRENT_BINARY_DIR}/include)
# Add bundled or system zlib.
MYSQL_CHECK_ZLIB_WITH_COMPRESS()
# Add bundled yassl/taocrypt or system openssl.
MYSQL_CHECK_SSL()
#
# Setup maintainer mode options by the end. Platform checks are
# not run with the warning options as to not perturb fragile checks
# (i.e. do not make warnings into errors).
#
# Why doesn't these flags affect the entire build?
# Because things may already have been included with ADD_SUBDIRECTORY
#
OPTION(MYSQL_MAINTAINER_MODE
"MySQL maintainer-specific development environment" OFF)
INCLUDE(maintainer)
IF(WITH_UNIT_TESTS)
ENABLE_TESTING()
ENDIF()
IF(NOT WITHOUT_SERVER)
SET (MYSQLD_STATIC_PLUGIN_LIBS "" CACHE INTERNAL "")
# Add storage engines and plugins.
CONFIGURE_PLUGINS()
ELSE()
# We may still want Cluster client libraries, use -DWITH_NDBCLUSTER=1
ADD_SUBDIRECTORY(storage/ndb)
ENDIF()
ADD_SUBDIRECTORY(include)
ADD_SUBDIRECTORY(dbug)
ADD_SUBDIRECTORY(strings)
ADD_SUBDIRECTORY(regex)
ADD_SUBDIRECTORY(mysys)
ADD_SUBDIRECTORY(mysys_ssl)
ADD_SUBDIRECTORY(extra)
ADD_SUBDIRECTORY(sql/share)
IF(NOT WITHOUT_SERVER)
ADD_SUBDIRECTORY(sql)
ENDIF()
IF(NOT WITHOUT_SERVER)
IF(EXISTS ${CMAKE_SOURCE_DIR}/internal/CMakeLists.txt)
ADD_SUBDIRECTORY(internal)
ENDIF()
ENDIF()
INCLUDE(cmake/abi_check.cmake)
INCLUDE(cmake/tags.cmake)
CONFIGURE_FILE(config.h.cmake ${CMAKE_BINARY_DIR}/include/my_config.h)
CONFIGURE_FILE(config.h.cmake ${CMAKE_BINARY_DIR}/include/config.h)
CONFIGURE_FILE(${CMAKE_SOURCE_DIR}/include/mysql_version.h.in
${CMAKE_BINARY_DIR}/include/mysql_version.h )
CONFIGURE_FILE(
${CMAKE_SOURCE_DIR}/cmake/info_macros.cmake.in
${CMAKE_BINARY_DIR}/info_macros.cmake @ONLY)
# Handle the "INFO_*" files.
INCLUDE(${CMAKE_BINARY_DIR}/info_macros.cmake)
# Source: This can be done during the cmake phase, all information is
# available, but should be repeated on each "make" just in case someone
# does "cmake ; make ; git pull ; make".
CREATE_INFO_SRC(${CMAKE_BINARY_DIR}/Docs)
ADD_CUSTOM_TARGET(INFO_SRC ALL
COMMAND ${CMAKE_COMMAND} -P ${CMAKE_SOURCE_DIR}/cmake/info_src.cmake
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
# Build flags: This must be postponed to the make phase.
ADD_CUSTOM_TARGET(INFO_BIN ALL
COMMAND ${CMAKE_COMMAND} -P ${CMAKE_SOURCE_DIR}/cmake/info_bin.cmake
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
# Packaging
IF(WIN32)
SET(CPACK_GENERATOR "ZIP")
ELSE()
SET(CPACK_GENERATOR "TGZ")
ENDIF()
# Create a single package with "make package"
# (see http://public.kitware.com/Bug/view.php?id=11452)
SET(CPACK_MONOLITHIC_INSTALL 1 CACHE INTERNAL "")
INCLUDE(CPack)
# C compiler flags consist of:
# CPPFLAGS Taken from environment, see above.
# ADD_DEFINITIONS In each individual CMakeLists.txt
# CMAKE_C_FLAGS From command line.
# We extend these in maintainer.cmake
# ENV{CFLAGS} From environment, but environment is ignored if
# CMAKE_C_FLAGS is also given on command line
# CMAKE_C_FLAGS_${CMAKE_BUILD_TYPE}
# We extend these in compiler_options.cmake
#
# Note that CMakeCache.txt contains cmake builtins for these variables,
# *not* the values that will actually be used:
IF(CMAKE_GENERATOR MATCHES "Makefiles")
MESSAGE(STATUS "CMAKE_BUILD_TYPE: ${CMAKE_BUILD_TYPE}")
ENDIF()
GET_PROPERTY(cwd_definitions DIRECTORY PROPERTY COMPILE_DEFINITIONS)
MESSAGE(STATUS "COMPILE_DEFINITIONS: ${cwd_definitions}")
MESSAGE(STATUS "CMAKE_C_FLAGS: ${CMAKE_C_FLAGS}")
MESSAGE(STATUS "CMAKE_CXX_FLAGS: ${CMAKE_CXX_FLAGS}")
IF(CMAKE_BUILD_TYPE AND CMAKE_GENERATOR MATCHES "Makefiles")
STRING(TOUPPER "${CMAKE_BUILD_TYPE}" CMAKEBT)
MESSAGE(STATUS "CMAKE_C_FLAGS_${CMAKEBT}: ${CMAKE_C_FLAGS_${CMAKEBT}}")
MESSAGE(STATUS "CMAKE_CXX_FLAGS_${CMAKEBT}: ${CMAKE_CXX_FLAGS_${CMAKEBT}}")
ENDIF()
IF(NOT CMAKE_GENERATOR MATCHES "Makefiles")
MESSAGE(STATUS "CMAKE_C_FLAGS_DEBUG: ${CMAKE_C_FLAGS_DEBUG}")
MESSAGE(STATUS "CMAKE_CXX_FLAGS_DEBUG: ${CMAKE_CXX_FLAGS_DEBUG}")
MESSAGE(STATUS
"CMAKE_C_FLAGS_RELWITHDEBINFO: ${CMAKE_C_FLAGS_RELWITHDEBINFO}")
MESSAGE(STATUS
"CMAKE_CXX_FLAGS_RELWITHDEBINFO: ${CMAKE_CXX_FLAGS_RELWITHDEBINFO}")
ENDIF()
马建仓 AI 助手
尝试更多
代码解读
代码找茬
代码优化
C
1
https://gitee.com/azt365/SQLAdvisor.git
git@gitee.com:azt365/SQLAdvisor.git
azt365
SQLAdvisor
SQLAdvisor
master

搜索帮助

0d507c66 1850385 C8b1a773 1850385