代码拉取完成，页面将自动刷新
同步操作将从 openKylin/curl 强制同步，此操作会覆盖自 Fork 仓库以来所做的任何修改，且无法恢复！！！
确定后同步将在后台操作，完成时将刷新页面，请耐心等待。
_ _ ____ _
___| | | | _ \| |
/ __| | | | |_) | |
| (__| |_| | _ <| |___
\___|\___/|_| \_\_____|
Changelog
Version 7.68.0 (8 Jan 2020)
Daniel Stenberg (8 Jan 2020)
- RELEASE-NOTES: 7.68.0
- THANKS: updated with names from the 7.68.0 release
- RELEASE-PROCEDURE: add four future release dates
and remove four past release dates
[skip ci]
Marcel Raad (6 Jan 2020)
- TrackMemory tests: always remove CR before LF
It was removed for output containing ' =' via `s/ =.*//`. With classic
MinGW, this made lines with `free()` end with CRLF, but lines with e.g.
`malloc()` end with only LF. The tests expect LF only.
Closes https://github.com/curl/curl/pull/4788
Daniel Stenberg (6 Jan 2020)
- multi.h: move INITIAL_MAX_CONCURRENT_STREAMS from public header
... to the private multihhandle.h. It is not for public use and it
wasn't prefixed correctly anyway!
Closes #4790
- file: fix copyright year range
Follow-up to 1b71bc532bd
- curl -w: handle a blank input file correctly
Previously it would end up with an uninitialized memory buffer that
would lead to a crash or junk getting output.
Added test 1271 to verify.
Reported-by: Brian Carpenter
Closes #4786
- file: on Windows, refuse paths that start with \\
... as that might cause an unexpected SMB connection to a given host
name.
Reported-by: Fernando Muñoz
CVE-2019-15601
Bug: https://curl.haxx.se/docs/CVE-2019-15601.html
Jay Satiro (6 Jan 2020)
- CURLOPT_READFUNCTION.3: fix fopen params in example
- CURLOPT_READFUNCTION.3: fix variable name in example
Reported-by: Paul Joyce
Fixes https://github.com/curl/curl/issues/4787
Daniel Stenberg (5 Jan 2020)
- curl:getparameter return error for --http3 if libcurl doesn't support
Closes #4785
- docs: mention CURL_MAX_INPUT_LENGTH restrictions
... for curl_easy_setopt() and curl_url_set().
[skip ci]
Closes #4783
- curl: properly free mimepost data
... as it could otherwise leak memory when a transfer failed.
Added test 1293 to verify.
Reported-by: Brian Carpenter
Fixes #4781
Closes #4782
- curl: cleanup multi handle on failure
... to fix memory leak in error path.
Fixes #4772
Closes #4780
Reported-by: Brian Carpenter
Marcel Raad (3 Jan 2020)
- lib: fix compiler warnings with `CURL_DISABLE_VERBOSE_STRINGS`
Closes https://github.com/curl/curl/pull/4775
Daniel Stenberg (3 Jan 2020)
- COPYING: it's 2020!
[skip ci]
Jay Satiro (3 Jan 2020)
- [Marc Aldorasi brought this change]
tests: Fix bounce requests with truncated writes
Prior to this change the swsbounce check in service_connection could
fail because prevtestno and prevpartno were not set, which would cause
the wrong response data to be sent to some tests and cause them to fail.
Ref: https://github.com/curl/curl/pull/4717#issuecomment-570240785
Marcel Raad (31 Dec 2019)
- tool: make a few char pointers point to const char instead
These are read-only.
Closes https://github.com/curl/curl/pull/4771
Jay Satiro (31 Dec 2019)
- tests: Change NTLM tests to require SSL
Prior to this change tests that required NTLM feature did not require
SSL feature.
There are pending changes to cmake builds that will allow enabling NTLM
in non-SSL builds in Windows. In that case the NTLM auth strings created
are different from what is expected by the NTLM tests and they fail:
"The issue with NTLM is that previous non-SSL builds would not enable
NTLM and so the NTLM tests would be skipped."
Assisted-by: marc-groundctl@users.noreply.github.com
Ref: https://github.com/curl/curl/pull/4717#issuecomment-566218729
Closes https://github.com/curl/curl/pull/4768
- [Michael Forney brought this change]
bearssl: Improve I/O handling
Factor out common I/O loop as bearssl_run_until, which reads/writes TLS
records until the desired engine state is reached. This is now used for
the handshake, read, write, and close.
Match OpenSSL SSL_write behavior, and don't return the number of bytes
written until the corresponding records have been completely flushed
across the socket. This involves keeping track of the length of data
buffered into the TLS engine, and assumes that when CURLE_AGAIN is
returned, the write function will be called again with the same data
and length arguments. This is the same requirement of SSL_write.
Handle TLS close notify as EOF when reading by returning 0.
Closes https://github.com/curl/curl/pull/4748
- travis: Fix error detection
- Stop using inline shell scripts for before_script and script sections.
Prior to this change Travis could ignore errors from commands in inline
scripts. I don't understand how or why it happens. This is a workaround.
Assisted-by: Simon Warta
Ref: https://github.com/travis-ci/travis-ci/issues/1066
Fixes https://github.com/curl/curl/issues/3730
Closes https://github.com/curl/curl/pull/3755
- tool_operate: fix mem leak when failed config parse
Found by fuzzing the config file.
Reported-by: Geeknik Labs
Fixes https://github.com/curl/curl/issues/4767
- [Xiang Xiao brought this change]
lib: remove erroneous +x file permission on some c files
Modified by commit eb9a604 accidentally.
Closes https://github.com/curl/curl/pull/4756
- [Xiang Xiao brought this change]
lib: fix warnings found when porting to NuttX
- Undefine DEBUGASSERT in curl_setup_once.h in case it was already
defined as a system macro.
- Don't compile write32_le in curl_endian unless
CURL_SIZEOF_CURL_OFF_T > 4, since it's only used by Curl_write64_le.
- Include <arpa/inet.h> in socketpair.c.
Closes https://github.com/curl/curl/pull/4756
- os400: Add missing CURLE error constants
Bug: https://github.com/curl/curl/pull/4754#issuecomment-569126922
Reported-by: Emil Engler
- CURLOPT_HEADERFUNCTION.3: Document that size is always 1
For compatibility with `fwrite`, the `CURLOPT_HEADERFUNCTION` callback
is passed two `size_t` parameters which, when multiplied, designate the
number of bytes of data passed in. In practice, CURL always sets the
first parameter (`size`) to 1.
This practice is also enshrined in documentation and cannot be changed
in future. The documentation states that the default callback is
`fwrite`, which means `fwrite` must be a suitable function for this
purpose. However, the documentation also states that the callback must
return the number of *bytes* it successfully handled, whereas ISO C
`fwrite` returns the number of items (each of size `size`) which it
wrote. The only way these numbers can be equal is if `size` is 1.
Since `size` is 1 and can never be changed in future anyway, document
that fact explicitly and let users rely on it.
Reported-by: Frank Gevaerts
Commit-message-by: Christopher Head
Ref: https://github.com/curl/curl/pull/2787
Fixes https://github.com/curl/curl/issues/4758
- examples/postinmemory.c: Call curl_global_cleanup always
Prior to this change curl_global_cleanup was not called if
curl_easy_init failed.
Reported-by: kouzhudong@users.noreply.github.com
Fixes https://github.com/curl/curl/issues/4751
Daniel Stenberg (21 Dec 2019)
- url2file.c: fix copyright year
Follow-up to 525787269599b5
- [Rickard Hallerbäck brought this change]
examples/url2file.c: corrected a comment
The comment was confusing and suggested that setting CURLOPT_NOPROGRESS
to 0L would both enable and disable debug output at the same time, like
a Schrödinger's cat of CURLOPTs.
Closes #4745
- HISTORY: OSS-Fuzz started fuzzing libcurl in 2017
- RELEASE-NOTES: synced
Jay Satiro (20 Dec 2019)
- ngtcp2: Support the latest update key callback type
- Remove our cb_update_key in favor of ngtcp2's new
ngtcp2_crypto_update_key_cb which does the same thing.
Several days ago the ngtcp2_update_key callback function prototype was
changed in ngtcp2/ngtcp2@42ce09c. Though it would be possible to
fix up our cb_update_key for that change they also added
ngtcp2_crypto_update_key_cb which does the same thing so we'll use that
instead.
Ref: https://github.com/ngtcp2/ngtcp2/commit/42ce09c
Closes https://github.com/curl/curl/pull/4735
Daniel Stenberg (19 Dec 2019)
- sws: search for "Testno:" header uncondtionally if no testno
Even if the initial request line wasn't found. With the fix to 1455, the
test number is now detected correctly.
(Problem found when running tests in random order.)
Closes #4744
- tests: set LC_ALL in more tests
Follow-up to 23208e330ac0c21
Closes #4743
- test165: set LC_ALL=en_US.UTF-8 too
On my current Debian Unstable with libidn2 2.2.0, I get an error if
LC_ALL is set to blank. Then curl errors out with:
curl: (3) Failed to convert www.åäö.se to ACE; could not convert string to UTF-8
Closes #4738
- curl.h: add two defines for the "pre ISO C" case
Without this fix, this caused a compilation failure on AIX with IBM xlc
13.1.3 compiler.
Reported-by: Ram Krushna Mishra
Fixes #4739
Closes #4740
- create_conn: prefer multiplexing to using new connections
... as it would previously prefer new connections rather than
multiplexing in most conditions! The (now removed) code was a leftover
from the Pipelining code that was translated wrongly into a
multiplex-only world.
Reported-by: Kunal Ekawde
Bug: https://curl.haxx.se/mail/lib-2019-12/0060.html
Closes #4732
- test1456: remove the use of a fixed local port
Fixup the test to instead not compare the port number. It sometimes
caused problems like this:
"curl: (45) bind failed with errno 98: Address already in use"
Closes #4733
Jay Satiro (18 Dec 2019)
- CURLOPT_QUOTE.3: fix typos
Prior to this change the EXAMPLE in the QUOTE/PREQUOTE/POSTQUOTE man
pages would not compile because a variable name was incorrect.
Reported-by: Bylon2@users.noreply.github.com
Fixes https://github.com/curl/curl/issues/4736
- [Gisle Vanem brought this change]
strerror: Fix compiler warning "empty expression"
- Remove the final semi-colon in the SEC2TXT() macro definition.
Before: #define SEC2TXT(sec) case sec: txt = #sec; break;
After: #define SEC2TXT(sec) case sec: txt = #sec; break
Prior to this change SEC2TXT(foo); would generate break;; which caused
the empty expression warning.
Ref: https://github.com/curl/curl/commit/5b22e1a#r36458547
Daniel Stenberg (18 Dec 2019)
- curl/parseconfig: use curl_free() to free memory allocated by libcurl
Reported-by: bxac on github
Fixes #4730
Closes #4731
- curl/parseconfig: fix mem-leak
When looping, first trying '.curlrc' and then '_curlrc', the function
would not free the first string.
Closes #4731
- CURLOPT_URL.3: "curl supports SMB version 1 (only)"
[skip ci]
- test1270: a basic -w redirect_url test
Closes #4728
- HISTORY: the SMB(S) support landed in 2014
- define: remove HAVE_ENGINE_LOAD_BUILTIN_ENGINES, not used anymore
It is covered by USE_OPENSSL_ENGINE now.
Reported-by: Gisle Vanem
Bug: https://github.com/curl/curl/commit/87b9337c8f76c21c57b204e88b68c6ecf3bd1ac0#commitcomment-36447951
Closes #4725
- lib: remove ASSIGNWITHINCONDITION exceptions, use our code style
... even for macros
Reviewed-by: Daniel Gustafsson
Reviewed-by: Jay Satiro
Reported-by: Jay Satiro
Fixes #4683
Closes #4722
- tests: make sure checksrc runs on header files too
- Revert "checksrc: fix regexp for ASSIGNWITHINCONDITION"
This reverts commit ba82673dac3e8d00a76aa5e3779a0cb80e7442af.
Bug: #4683
- KNOWN_BUGS: TLS session cache doesn't work with TFO
[skip ci]
Closes #4301
- KNOWN_BUGS: Connection information when using TCP Fast Open
Also point to #4296 for more details
Closes #4296
- KNOWN_BUGS: LDAP on Windows doesn't work
Closes #4261
- docs: TLS SRP doesn't work with TLS 1.3
Reported-by: sayrer on github
Closes #4262
[skip ci]
Dan Fandrich (16 Dec 2019)
- cirrus: Switch to the FreeBSD 12.1 point release & enable more tests.
A few tests are now passing on FreeBSD, so no longer skip them.
[skip ci]
Daniel Stenberg (16 Dec 2019)
- azure: the macos cmake doesn't need to install cmake
Error: cmake 3.15.5 is already installed
To upgrade to 3.16.1, run `brew upgrade cmake`.
Closes #4723
Jay Satiro (15 Dec 2019)
- winbuild: Document CURL_STATICLIB requirement for static libcurl
A static libcurl (ie winbuild mode=static) requires that the user define
CURL_STATICLIB when using it in their application. This is already
covered in the FAQ and INSTALL.md, but is a pretty important point so
now it's noted in the BUILD.WINDOWS.txt as well.
Assisted-by: Michael Vittiglio
Closes https://github.com/curl/curl/pull/4721
Daniel Stenberg (15 Dec 2019)
- [Santino Keupp brought this change]
libssh2: add support for ECDSA and ed25519 knownhost keys
... if a new enough libssh2 version is present.
Source: https://curl.haxx.se/mail/archive-2019-12/0023.html
Co-Authored-by: Daniel Stenberg
Closes #4714
- lib1591: free memory properly on OOM, in the trailers callback
Detected by torture tests.
Closes #4720
- runtests: --repeat=[num] to repeat tests
Closes #4715
- RELEASE-NOTES: synced
- azure: add a torture test on mac
Uses --shallow=25 to keep it small enough to get through in time.
Closes #4712
- multi: free sockhash on OOM
This would otherwise leak memory in the error path.
Detected by torture test 1540.
Closes #4713
Marcel Raad (13 Dec 2019)
- tests: use DoH feature for DoH tests
Previously, http/2 was used instead.
Assisted-by: Jay Satiro
Closes https://github.com/curl/curl/pull/4692
- hostip: suppress compiler warning
With `--disable-doh --disable-threaded-resolver`, the `dns` parameter
is not used.
Closes https://github.com/curl/curl/pull/4692
- tests: fix build with `CURL_DISABLE_DOH`
Closes https://github.com/curl/curl/pull/4692
Daniel Stenberg (13 Dec 2019)
- azure: add a torture test
Skipping all FTP tests for speed reasons.
Closes #4697
- azure: make the default build use --enable-debug --enable-werror
- ntlm_wb: fix double-free in OOM
Detected by torture testing test 1310
Closes #4710
Dan Fandrich (13 Dec 2019)
- cirrus: Drop the FreeBSD 10.4 build
Upstream support for 10.4 ended a year ago, and it looks like the image
is now gone, too.
[skip ci]
Daniel Stenberg (13 Dec 2019)
- unit1620: fix bad free in OOM
Closes #4709
- unit1609: fix mem-leak in OOM
Closes #4709
- unit1607: fix mem-leak in OOM
Closes #4709
- lib1559: fix mem-leak in OOM
Closes #4709
- lib1557: fix mem-leak in OOM
Closes #4709
- altsvc: make the save function ignore NULL filenames
It might happen in OOM situations. Detected bv torture tests.
Closes #4707
- curl: fix memory leak in OOM in etags logic
Detected by torture tests
Closes #4706
- doh: make it behave when built without proxy support
Reported-by: Marcel Raad
Bug: https://github.com/curl/curl/pull/4692#issuecomment-564115734
Closes #4704
- curl: improved cleanup in upload error path
Memory leak found by torture test 58
Closes #4705
- mailmap: fix Andrew Ishchuk
- travis: make torture use --shallow=40
As a first step to enable it to run over a more diverse set of tests in
a reasonable time.
- runtests: introduce --shallow to reduce huge torture tests
When set, shallow mode limits runtests -t to make no more than NUM fails
per test case. If more are found, it will randomly discard entries until
the number is right. The random seed can also be set.
This is particularly useful when running MANY tests as then most torture
failures will already fail the same functions over and over and make the
total operation painfully tedious.
Closes #4699
- conncache: CONNECT_ONLY connections assumed always in-use
This makes them never to be considered "the oldest" to be discarded when
reaching the connection cache limit. The reasoning here is that
CONNECT_ONLY is primarily used in combination with using the
connection's socket post connect and since that is used outside of
curl's knowledge we must assume that it is in use until explicitly
closed.
Reported-by: Pavel Pavlov
Reported-by: Pavel Löbl
Fixes #4426
Fixes #4369
Closes #4696
- [Gisle Vanem brought this change]
vtls: make BearSSL possible to set with CURL_SSL_BACKEND
Ref: https://github.com/curl/curl/commit/9b879160df01e7ddbb4770904391d3b74114302b#commitcomment-36355622
Closes #4698
- RELEASE-NOTES: synced
- travis: remove "coverage", make it "torture"
The coveralls service and test coverage numbers are just too unreliable.
Removed badge from README.md as well.
Fixes #4694
Closes #4695
- azure: add libssh2 and cmake macos builds
Removed the macos libssh2 build from travis
Closes #4686
- curl: use errorf() better
Change series of error outputs to use errorf().
Only errors that are due to mistakes in command line option usage should
use helpf(), other types of errors in the tool should rather use
errorf().
Closes #4691
Jay Satiro (9 Dec 2019)
- [Marc Hoersken brought this change]
tests: make it possible to set executable extensions
This enables the use of Windows Subsystem for Linux (WSL) to run the
testsuite against Windows binaries while using Linux servers.
This commit introduces the following environment variables:
- CURL_TEST_EXE_EXT: set the executable extension for all components
- CURL_TEST_EXE_EXT_TOOL: set it for the curl tool only
- CURL_TEST_EXE_EXT_SSH: set it for the SSH tools only
Later testcurl.pl could be adjusted to make use of those variables.
- CURL_TEST_EXE_EXT_SRV: set it for the test servers only
(This is one of several commits to support use of WSL for the tests.)
Closes https://github.com/curl/curl/pull/3899
- [Marc Hoersken brought this change]
tests: fix permissions of ssh keys in WSL
Keys created on Windows Subsystem for Linux (WSL) require it for some
reason.
(This is one of several commits to support use of WSL for the tests.)
Ref: https://github.com/curl/curl/pull/3899
- [Marc Hoersken brought this change]
tests: use \r\n for log messages in WSL
Bash in Windows Subsystem for Linux (WSL) requires it for some reason.
(This is one of several commits to support use of WSL for the tests.)
Ref: https://github.com/curl/curl/pull/3899
- [Andrew Ishchuk brought this change]
winbuild: Define CARES_STATICLIB when WITH_CARES=static
When libcurl is built with MODE=static, c-ares is forced into static
linkage too. That doesn't happen when MODE=dll so linker would break
over undefined symbols.
closes https://github.com/curl/curl/pull/4688
Daniel Stenberg (9 Dec 2019)
- conn: always set bits.close with connclose()
Closes #4690
- cirrus: enable clang sanitizers on freebsd 13
- conncache: fix multi-thread use of shared connection cache
It could accidentally let the connection get used by more than one
thread, leading to double-free and more.
Reported-by: Christopher Reid
Fixes #4544
Closes #4557
- azure: add a vanilla macos build
Closes #4685
- curl: make the etag load logic work without fseek
The fseek()s were unnecessary and caused Coverity warning CID 1456554
Closes #4681
- mailmap: Mohammad Hasbini
- [Mohammad Hasbini brought this change]
docs: fix some typos
Closes #4680
- RELEASE-NOTES: synced
Jay Satiro (5 Dec 2019)
- lib: fix some loose ends for recently added CURLSSLOPT_NO_PARTIALCHAIN
Add support for CURLSSLOPT_NO_PARTIALCHAIN in CURLOPT_PROXY_SSL_OPTIONS
and OS400 package spec.
Also I added the option to the NameValue list in the tool even though it
isn't exposed as a command-line option (...yet?). (NameValue stringizes
the option name for the curl cmd -> libcurl source generator)
Follow-up to 564d88a which added CURLSSLOPT_NO_PARTIALCHAIN.
Ref: https://github.com/curl/curl/pull/4655
- setopt: Fix ALPN / NPN user option when built without HTTP2
- Stop treating lack of HTTP2 as an unknown option error result for
CURLOPT_SSL_ENABLE_ALPN and CURLOPT_SSL_ENABLE_NPN.
Prior to this change it was impossible to disable ALPN / NPN if libcurl
was built without HTTP2. Setting either option would result in
CURLE_UNKNOWN_OPTION and the respective internal option would not be
set. That was incorrect since ALPN and NPN are used independent of
HTTP2.
Reported-by: Shailesh Kapse
Fixes https://github.com/curl/curl/issues/4668
Closes https://github.com/curl/curl/pull/4672
Daniel Stenberg (5 Dec 2019)
- etag: allow both --etag-compare and --etag-save in same cmdline
Fixes #4669
Closes #4678
Marcel Raad (5 Dec 2019)
- curl_setup: fix `CURLRES_IPV6` condition
Move the definition of `CURLRES_IPV6` to before undefining
`HAVE_GETADDRINFO`. Regression from commit 67a08dca27a which caused
some tests to fail and others to be skipped with c-ares.
Fixes https://github.com/curl/curl/issues/4673
Closes https://github.com/curl/curl/pull/4677
Daniel Stenberg (5 Dec 2019)
- test342: make it return a 304 as the tag matches
Peter Wu (4 Dec 2019)
- CMake: add support for building with the NSS vtls backend
Options are cross-checked with configure.ac and acinclude.m4.
Tested on Arch Linux, untested on other platforms like Windows or macOS.
Closes #4663
Reviewed-by: Kamil Dudka
Daniel Stenberg (4 Dec 2019)
- azure: add more builds
... removed two from travis (that now runs on azure instead)
Closes #4671
- CURLOPT_VERBOSE.3: see also ERRORBUFFER
- hostip4.c: bump copyright year range
Marcel Raad (3 Dec 2019)
- configure: enable IPv6 support without `getaddrinfo`
This makes it possible to recognize and connect to literal IPv6
addresses when `getaddrinfo` is not available, which is already the
case for the CMake build. This affects e.g. classic MinGW because it
still targets Windows 2000 by default, where `getaddrinfo` is not
available, but general IPv6 support is.
Instead of checking for `getaddrinfo`, check for `sockaddr_in6` as the
CMake build does.
Closes https://github.com/curl/curl/pull/4662
- curl_setup: disable IPv6 resolver without `getaddrinfo`
Also, use `CURLRES_IPV6` only for actual DNS resolution, not for IPv6
address support. This makes it possible to connect to IPv6 literals by
setting `ENABLE_IPV6` even without `getaddrinfo` support. It also fixes
the CMake build when using the synchronous resolver without
`getaddrinfo` support.
Closes https://github.com/curl/curl/pull/4662
Daniel Stenberg (3 Dec 2019)
- github action/azure pipeline: run 'make test-nonflaky' for tests
To match travis and give more info on failures.
- openssl: CURLSSLOPT_NO_PARTIALCHAIN can disable partial cert chains
Closes #4655
- openssl: set X509_V_FLAG_PARTIAL_CHAIN
Have intermediate certificates in the trust store be treated as
trust-anchors, in the same way as self-signed root CA certificates
are. This allows users to verify servers using the intermediate cert
only, instead of needing the whole chain.
Other TLS backends already accept partial chains.
Reported-by: Jeffrey Walton
Bug: https://curl.haxx.se/mail/lib-2019-11/0094.html
- curl: show better error message when no homedir is found
Reported-by: Vlastimil Ovčáčík
Fixes #4644
Closes #4665
- OPENSOCKETFUNCTION.3: correct the purpose description
Reported-by: Jeff Mears
Bug: https://curl.haxx.se/mail/lib-2019-12/0007.html
Closes #4667
- [Peter Wu brought this change]
travis: do not use OVERRIDE_CC or OVERRIDE_CXX if empty
Fixes the macOS builds where OVERRIDE_CC and OVERRIDE_CXX are not set.
Reported-by: Jay Satiro
Fixes #4659
Closes #4661
Closes #4664
- azure-pipelines: fix the test script
- Azure Pipelines: initial CI setup
[skip ci]
- docs: add "added: 7.68.0" to the --etag-* docs
- copyright: fix the year ranges for two files
Follow-up to 9c1806ae
Jay Satiro (1 Dec 2019)
- build: Disable Visual Studio warning "conditional expression is constant"
- Disable warning C4127 "conditional expression is constant" globally
in curl_setup.h for when building with Microsoft's compiler.
This mainly affects building with the Visual Studio project files found
in the projects dir.
Prior to this change the cmake and winbuild build systems already
disabled 4127 globally for when building with Microsoft's compiler.
Also, 4127 was already disabled for all build systems in the limited
circumstance of the WHILE_FALSE macro which disabled the warning
specifically for while(0). This commit removes the WHILE_FALSE macro and
all other cruft in favor of disabling globally in curl_setup.
Background:
We have various macros that cause 0 or 1 to be evaluated, which would
cause warning C4127 in Visual Studio. For example this causes it:
#define Curl_resolver_asynch() 1
Full behavior is not clearly defined and inconsistent across versions.
However it is documented that since VS 2015 Update 3 Microsoft has
addressed this somewhat but not entirely, not warning on while(true) for
example.
Prior to this change some C4127 warnings occurred when I built with
Visual Studio using the generated projects in the projects dir.
Closes https://github.com/curl/curl/pull/4658
- openssl: retrieve reported LibreSSL version at runtime
- Retrieve LibreSSL runtime version when supported (>= 2.7.1).
For earlier versions we continue to use the compile-time version.
Ref: https://man.openbsd.org/OPENSSL_VERSION_NUMBER.3
Closes https://github.com/curl/curl/pull/2425
- strerror: Add Curl_winapi_strerror for Win API specific errors
- In all code call Curl_winapi_strerror instead of Curl_strerror when
the error code is known to be from Windows GetLastError.
Curl_strerror prefers CRT error codes (errno) over Windows API error
codes (GetLastError) when the two overlap. When we know the error code
is from GetLastError it is more accurate to prefer the Windows API error
messages.
Reported-by: Richard Alcock
Fixes https://github.com/curl/curl/issues/4550
Closes https://github.com/curl/curl/pull/4581
Daniel Stenberg (2 Dec 2019)
- global_init: undo the "intialized" bump in case of failure
... so that failures in the global init function don't count as a
working init and it can then be called again.
Reported-by: Paul Groke
Fixes #4636
Closes #4653
- parsedate: offer a getdate_capped() alternative
... and use internally. This function will return TIME_T_MAX instead of
failure if the parsed data is found to be larger than what can be
represented. TIME_T_MAX being the largest value curl can represent.
Reviewed-by: Daniel Gustafsson
Reported-by: JanB on github
Fixes #4152
Closes #4651
- docs: add more references to curl_multi_poll
Fixes #4643
Closes #4652
- sha256: bump the copyright year range
Follow-up from 66e21520f
Daniel Gustafsson (28 Nov 2019)
- curl_setup_once: consistently use WHILE_FALSE in macros
The WHILE_FALSE construction is used to avoid compiler warnings in
macro constructions. This fixes a few instances where it was not
used in order to keep the code consistent.
Closes #4649
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Daniel Stenberg (28 Nov 2019)
- [Steve Holme brought this change]
http_ntlm: Remove duplicate NSS initialisation
Given that this is performed by the NTLM code there is no need to
perform the initialisation in the HTTP layer. This also keeps the
initialisation the same as the SASL based protocols and also fixes a
possible compilation issue if both NSS and SSPI were to be used as
multiple SSL backends.
Reviewed-by: Kamil Dudka
Closes #3935
Daniel Gustafsson (28 Nov 2019)
- checksrc: fix regexp for ASSIGNWITHINCONDITION
The regexp looking for assignments within conditions was too greedy
and matched a too long string in the case of multiple conditionals
on the same line. This is basically only a problem in single line
macros, and the code which exemplified this was essentially:
do { if((x) != NULL) { x = NULL; } } while(0)
..where the final parenthesis of while(0) matched the regexp, and
the legal assignment in the block triggered the warning. Fix by
making the regexp less greedy by matching for the tell-tale signs
of the if statement ending.
Also remove the one occurrence where the warning was disabled due
to a construction like the above, where the warning didn't apply
when fixed.
Closes #4647
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Daniel Stenberg (28 Nov 2019)
- RELEASE-NOTES: synced
- [Maros Priputen brought this change]
curl: two new command line options for etags
--etag-compare and --etag-save
Suggested-by: Paul Hoffman
Fixes #4277
Closes #4543
Daniel Gustafsson (28 Nov 2019)
- docs: fix typos
Daniel Stenberg (28 Nov 2019)
- mailmap: Niall O'Reilly's name
- [Niall O'Reilly brought this change]
doh: use dedicated probe slots
... to easier allow additional DNS transactions.
Closes #4629
- travis: build ngtcp2 with --enable-lib-only
... makes it skip the examples and other stuff we don't neeed.
Closes #4646
- [David Benjamin brought this change]
ngtcp2: fix thread-safety bug in error-handling
ERR_error_string(NULL) should never be called. It places the error in a
global buffer, which is not thread-safe. Use ERR_error_string_n with a
local buffer instead.
Closes #4645
- travis: export the CC/CXX variables when set
Suggested-by: Peter Wu
Fixes #4637
Closes #4640
Marcel Raad (26 Nov 2019)
- dist: add error-codes.pl
Follow-up to commit 74f441c6d31.
This should fix test 1175 when run via the daily source tarballs.
Closes https://github.com/curl/curl/pull/4638
Daniel Stenberg (26 Nov 2019)
- [John Schroeder brought this change]
curl: fix --upload-file . hangs if delay in STDIN
Attempt to unpause a busy read in the CURLOPT_XFERINFOFUNCTION.
When uploading from stdin in non-blocking mode, a delay in reading
the stream (EAGAIN) causes curl to pause sending data
(CURL_READFUNC_PAUSE). Prior to this change, a busy read was
detected and unpaused only in the CURLOPT_WRITEFUNCTION handler.
This change performs the same busy read handling in a
CURLOPT_XFERINFOFUNCTION handler.
Fixes #2051
Closes #4599
Reported-by: bdry on github
- [John Schroeder brought this change]
XFERINFOFUNCTION: support CURL_PROGRESSFUNC_CONTINUE
(also for PROGRESSFUNCTION)
By returning this value from the callback, the internal progress
function call is still called afterward.
Closes #4599
- [Michael Forney brought this change]
TLS: add BearSSL vtls implementation
Closes #4597
- curl_multi_wakeup.3: add example and AVAILABILITY
Reviewed-by: Gergely Nagy
Closes #4635
- [Gergely Nagy brought this change]
multi: add curl_multi_wakeup()
This commit adds curl_multi_wakeup() which was previously in the TODO
list under the curl_multi_unblock name.
On some platforms and with some configurations this feature might not be
available or can fail, in these cases a new error code
(CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup().
Fixes #4418
Closes #4608
Jay Satiro (24 Nov 2019)
- [Xiaoyin Liu brought this change]
schannel: fix --tls-max for when min is --tlsv1 or default
Prior to this change schannel ignored --tls-max (CURL_SSLVERSION_MAX_
macros) when --tlsv1 (CURL_SSLVERSION_TLSv1) or default TLS
(CURL_SSLVERSION_DEFAULT), using a max of TLS 1.2 always.
Closes https://github.com/curl/curl/pull/4633
- checksrc.bat: Add a check for vquic and vssh directories
Ref: https://github.com/curl/curl/pull/4607
- projects: Fix Visual Studio projects SSH builds
- Generate VQUIC and VSSH filenames in Visual Studio project files.
Prior to this change generated Visual Studio project configurations that
enabled SSH did not build properly. Broken since SSH files were moved to
lib/vssh 3 months ago in 5b2d703.
Fixes https://github.com/curl/curl/issues/4492
Fixes https://github.com/curl/curl/issues/4630
Closes https://github.com/curl/curl/pull/4607
Daniel Stenberg (23 Nov 2019)
- RELEASE-NOTES: synced
Jay Satiro (22 Nov 2019)
- openssl: Revert to less sensitivity for SYSCALL errors
- Disable the extra sensitivity except in debug builds (--enable-debug).
- Improve SYSCALL error message logic in ossl_send and ossl_recv so that
"No error" / "Success" socket error text isn't shown on SYSCALL error.
Prior to this change 0ab38f5 (precedes 7.67.0) increased the sensitivity
of OpenSSL's SSL_ERROR_SYSCALL error so that abrupt server closures were
also considered errors. For example, a server that does not send a known
protocol termination point (eg HTTP content length or chunked encoding)
_and_ does not send a TLS termination point (close_notify alert) would
cause an error if it closed the connection.
To be clear that behavior made it into release build 7.67.0
unintentionally. Several users have reported it as an issue.
Ultimately the idea is a good one, since it can help prevent against a
truncation attack. Other SSL backends may already behave similarly (such
as Windows native OS SSL Schannel). However much more of our user base
is using OpenSSL and there is a mass of legacy users in that space, so I
think that behavior should be partially reverted and then rolled out
slowly.
This commit changes the behavior so that the increased sensitivity is
disabled in all curl builds except curl debug builds (DEBUGBUILD). If
after a period of time there are no major issues then it can be enabled
in dev and release builds with the newest OpenSSL (1.1.1+), since users
using the newest OpenSSL are the least likely to have legacy problems.
Bug: https://github.com/curl/curl/issues/4409#issuecomment-555955794
Reported-by: Bjoern Franke
Fixes https://github.com/curl/curl/issues/4624
Closes https://github.com/curl/curl/pull/4623
- [Daniel Stenberg brought this change]
openssl: improve error message for SYSCALL during connect
Reported-by: Paulo Roberto Tomasi
Bug: https://curl.haxx.se/mail/archive-2019-11/0005.html
Closes https://github.com/curl/curl/pull/4593
Daniel Stenberg (22 Nov 2019)
- test1175: verify symbols-in-versions and libcurl-errors.3 in sync
Closes #4628
- include: make CURLE_HTTP3 use a new error code
To avoid potential issues with error code reuse.
Reported-by: Christoph M. Becker
Assisted-by: Dan Fandrich
Fixes #4601
Closes #4627
- bump: next release will be 7.68.0
- curl: add --parallel-immediate
Starting with this change when doing parallel transfers, without this
option set, curl will prefer to create new transfers multiplexed on an
existing connection rather than creating a brand new one.
--parallel-immediate can be set to tell curl to prefer to use new
connections rather than to wait and try to multiplex.
libcurl-wise, this means that curl will set CURLOPT_PIPEWAIT by default
on parallel transfers.
Suggested-by: Tom van der Woerdt
Closes #4500
Daniel Gustafsson (20 Nov 2019)
- [Victor Magierski brought this change]
docs: fix typos
Change 'experiemental' to 'experimental'.
Closes #4618
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Jay Satiro (18 Nov 2019)
- projects: Fix Visual Studio wolfSSL configurations
- s/USE_CYASSL/USE_WOLFSSL/
- Remove old compatibility macros.
Follow-up to 1c6c59a from several months ago when CyaSSL named symbols
were renamed to wolfSSL. The wolfSSL library was formerly named CyaSSL
and we kept using their old name for compatibility reasons, until
earlier this year.
Daniel Stenberg (18 Nov 2019)
- RELEASE-NOTES: synced
- [Javier Blazquez brought this change]
ngtcp2: use overflow buffer for extra HTTP/3 data
Fixes #4525
Closes #4603
- altsvc: bump to h3-24
... as both ngtcp2 and quiche now support that in their master branches
Closes #4604
- ngtcp2: free used resources on disconnect
Fixes #4614
Closes #4615
- ngtcp2: handle key updates as ngtcp2 master branch tells us
Reviewed-by: Tatsuhiro Tsujikawa
Fixes #4612
Closes #4613
Jay Satiro (17 Nov 2019)
- [Gergely Nagy brought this change]
multi: Fix curl_multi_poll wait when extra_fds && !extra_nfds
Prior to this change:
The check if an extra wait is necessary was based not on the
number of extra fds but on the pointer.
If a non-null pointer was given in extra_fds, but extra_nfds
was zero, then the wait was skipped even though poll was not
called.
Closes https://github.com/curl/curl/pull/4610
- lib: Move lib/ssh.h -> lib/vssh/ssh.h
Follow-up to 5b2d703 which moved ssh source files to vssh.
Closes https://github.com/curl/curl/pull/4609
Daniel Stenberg (16 Nov 2019)
- [Andreas Falkenhahn brought this change]
INSTALL.md: provide Android build instructions
Closes #4606
- [Niall O'Reilly brought this change]
doh: improced both encoding and decoding
Improved estimation of expected_len and updated related comments;
increased strictness of QNAME-encoding, adding error detection for empty
labels and names longer than the overall limit; avoided treating DNAME
as unexpected;
updated unit test 1655 with more thorough set of proofs and tests
Closes #4598
- ngtcp2: increase QUIC window size when data is consumed
Assisted-by: Javier Blazquez
Ref #4525 (partial fix)
Closes #4600
- [Melissa Mears brought this change]
config-win32: cpu-machine-OS for Windows on ARM
Define the OS macro properly for Windows on ARM builds. Also, we might
as well add the GCC-style IA-64 macro.
Closes #4590
- examples: add multi-poll.c
Show how curl_multi_poll() makes it even easier to use the multi
interface.
Closes #4596
- multi_poll: avoid busy-loop when called without easy handles attached
Fixes #4594
Closes #4595
Reported-by: 3dyd on github
- curl: fix -T globbing
Regression from e59371a4936f8 (7.67.0)
Added test 490, 491 and 492 to verify the functionality.
Reported-by: Kamil Dudka
Reported-by: Anderson Sasaki
Fixes #4588
Closes #4591
- HISTORY: added cmake, HTTP/3 and parallel downloads with curl
- quiche: reject headers in the wrong order
Pseudo header MUST come before regular headers or cause an error.
Reported-by: Cynthia Coan
Fixes #4571
Closes #4584
- openssl: prevent recursive function calls from ctx callbacks
Follow the pattern of many other callbacks.
Ref: #4546
Closes #4585
- CURL-DISABLE: initial docs for the CURL_DISABLE_* defines
The disable-scan script used in test 1165 is extended to also verify
that the docs cover all used defines and all defines offered by
configure.
Reported-by: SLDiggie on github
Fixes #4545
Closes #4587
- remove_handle: clear expire timers after multi_done()
Since 59041f0, a new timer might be set in multi_done() so the clearing
of the timers need to happen afterwards!
Reported-by: Max Kellermann
Fixes #4575
Closes #4583
Marcel Raad (10 Nov 2019)
- test1558: use double slash after file:
Classic MinGW / MSYS 1 doesn't support `MSYS2_ARG_CONV_EXCL`, so this
test unnecessarily failed when using `file:/` instead of `file:///`.
Closes https://github.com/curl/curl/pull/4554
Daniel Stenberg (10 Nov 2019)
- pause: avoid updating socket if done was already called
... avoids unnecesary recursive risk when the transfer is already done.
Reported-by: Richard Bowker
Fixes #4563
Closes #4574
Jay Satiro (9 Nov 2019)
- strerror: Fix an error looking up some Windows error strings
- Use FORMAT_MESSAGE_IGNORE_INSERTS to ignore format specifiers in
Windows error strings.
Since we are not in control of the error code we don't know what
information may be needed by the error string's format specifiers.
Prior to this change Windows API error strings which contain specifiers
(think specifiers like similar to printf specifiers) would not be shown.
The FormatMessage Windows API call which turns a Windows error code into
a string could fail and set error ERROR_INVALID_PARAMETER if that error
string contained a format specifier. FormatMessage expects a va_list for
the specifiers, unless inserts are ignored in which case no substitution
is attempted.
Ref: https://devblogs.microsoft.com/oldnewthing/20071128-00/?p=24353
- [r-a-sattarov brought this change]
system.h: fix for MCST lcc compiler
Fixed build by MCST lcc compiler on MCST Elbrus 2000 architecture and do
some code cleanup.
e2k (Elbrus 2000) - this is VLIW/EPIC architecture, like Intel Itanium
architecture.
Ref: https://en.wikipedia.org/wiki/Elbrus_2000
Closes https://github.com/curl/curl/pull/4576
Daniel Stenberg (8 Nov 2019)
- TODO: curl_multi_unblock
Closes #4418
- TODO: Run web-platform-tests url tests
Closes #4477
- TODO: 1.4 alt-svc sharing
Closes #4476
- test1560: require IPv6 for IPv6 aware URL parsing
The URL parser function can't reject a bad IPv6 address properly when
curl was built without IPv6 support.
Reported-by: Marcel Raad
Fixes #4556
Closes #4572
- checksrc: repair the copyrightyear check
- Consider a modified file to be committed this year.
- Make the travis CHECKSRC also do COPYRIGHTYEAR scan in examples and
includes
- Ignore 0 parents when getting latest commit date of file.
since in the CI we're dealing with a truncated repo of last 50 commits,
the file's most recent commit may not be available. when this happens
git log and rev-list show the initial commit (ie first commit not to be
truncated) but that's incorrect so ignore it.
Ref: https://github.com/curl/curl/pull/4547
Closes https://github.com/curl/curl/pull/4549
Co-authored-by: Jay Satiro
- copyrights: fix copyright year range
.. because checksrc's copyright year check stopped working.
Ref: https://github.com/curl/curl/pull/4547
Closes https://github.com/curl/curl/pull/4549
- RELEASE-NOTES: synced
- curlver: bump to 7.67.1
- mailmap: fixup Massimiliano Fantuzzi
- scripts/contributors: make committers get included too
in addition to authors
Jay Satiro (8 Nov 2019)
- [Massimiliano Fantuzzi brought this change]
configure: fix typo in help text
Closes https://github.com/curl/curl/pull/4570
Daniel Stenberg (7 Nov 2019)
- [Christian Schmitz brought this change]
ntlm: USE_WIN32_CRYPTO check removed to get USE_NTLM2SESSION set
Closes #3704
Jay Satiro (6 Nov 2019)
- [Wyatt O'Day brought this change]
build: fix for CURL_DISABLE_DOH
Fixes https://github.com/curl/curl/issues/4565
Closes https://github.com/curl/curl/pull/4566
- [Leonardo Taccari brought this change]
configure: avoid unportable `==' test(1) operator
Closes https://github.com/curl/curl/pull/4567
Version 7.67.0 (5 Nov 2019)
Daniel Stenberg (5 Nov 2019)
- RELEASE-NOTES: synced
The 7.67.0 release
- THANKS: add new names from 7.67.0
- configure: only say ipv6 enabled when the variable is set
Previously it could say "IPv6: enabled" at the end of the configure run
but the define wasn't set because of a missing getaddrinfo().
Reported-by: Marcel Raad
Fixes #4555
Closes #4560
Marcel Raad (2 Nov 2019)
- certs/Server-localhost-lastSAN-sv: regenerate with sha256
All other certificates were regenerated in commit ba782baac30, but
this one was missed.
Fixes test3001 on modern systems.
Closes https://github.com/curl/curl/pull/4551
Daniel Stenberg (2 Nov 2019)
- [Vilhelm Prytz brought this change]
copyrights: update all copyright notices to 2019 on files changed this year
Closes #4547
- [Bastien Bouclet brought this change]
mbedtls: add error message for cert validity starting in the future
Closes #4552
Jay Satiro (1 Nov 2019)
- schannel_verify: Fix concurrent openings of CA file
- Open the CA file using FILE_SHARE_READ mode so that others can read
from it as well.
Prior to this change our schannel code opened the CA file without
sharing which meant concurrent openings (eg an attempt from another
thread or process) would fail during the time it was open without
sharing, which in curl's case would cause error:
"schannel: failed to open CA file".
Bug: https://curl.haxx.se/mail/lib-2019-10/0104.html
Reported-by: Richard Alcock
Daniel Stenberg (31 Oct 2019)
- gtls: make gnutls_bye() not wait for response on shutdown
... as it can make it wait there for a long time for no good purpose.
Patched-by: Jay Satiro
Reported-by: Bylon2 on github
Adviced-by: Nikos Mavrogiannopoulos
Fixes #4487
Closes #4541
- [Michał Janiszewski brought this change]
appveyor: publish artifacts on appveyor
This allows obtaining upstream builds of curl directly from appveyor for
all the available configurations
Closes #4509
- url: make Curl_close() NULLify the pointer too
This is the common pattern used in the code and by a unified approach we
avoid mistakes.
Closes #4534
- [Trivikram Kamat brought this change]
INSTALL: add missing space for configure commands
Closes #4539
- url: Curl_free_request_state() should also free doh handles
... or risk DoH memory leaks.
Reported-by: Paul Dreik
Fixes #4463
Closes #4527
- examples: remove the "this exact code has not been verified"
... as really confuses the reader to not know what to believe!
- [Trivikram Kamat brought this change]
HTTP3: fix typo somehere1 > somewhere1
Closes #4535
Jay Satiro (28 Oct 2019)
- [Javier Blazquez brought this change]
HTTP3: fix invalid use of sendto for connected UDP socket
On macOS/BSD, trying to call sendto on a connected UDP socket fails
with a EISCONN error. Because the singleipconnect has already called
connect on the socket when we're trying to use it for QUIC transfers
we need to use plain send instead.
Fixes #4529
Closes https://github.com/curl/curl/pull/4533
Daniel Stenberg (28 Oct 2019)
- RELEASE-NOTES: synced
- [Javier Blazquez brought this change]
HTTP3: fix Windows build
The ngtcp2 QUIC backend was using the MSG_DONTWAIT flag for send/recv
in order to perform nonblocking operations. On Windows this flag does
not exist. Instead, the socket must be set to nonblocking mode via
ioctlsocket.
This change sets the nonblocking flag on UDP sockets used for QUIC on
all platforms so the use of MSG_DONTWAIT is not needed.
Fixes #4531
Closes #4532
Marcel Raad (27 Oct 2019)
- appveyor: add --disable-proxy autotools build
This would have caught issue #3926.
Also make formatting more consistent.
Closes https://github.com/curl/curl/pull/4526
Daniel Stenberg (25 Oct 2019)
- appveyor: make winbuilds with DEBUG=no/yes and VS 2015/2017
... and invoke "curl -V" once done
Co-Authored-By: Jay Satiro
Closes #4523
- [Francois Rivard brought this change]
schannel: reverse the order of certinfo insertions
Fixes #4518
Closes #4519
Marcel Raad (24 Oct 2019)
- test1591: fix spelling of http feature
The test never got run because the feature name is `http` in lowercase.
Closes https://github.com/curl/curl/pull/4520
Daniel Stenberg (23 Oct 2019)
- [Michał Janiszewski brought this change]
appveyor: Use two parallel compilation on appveyor with CMake
Appveyor provides 2 CPUs for each builder[1], make sure to use parallel
compilation, when running with CMake. CMake learned this new option in
version 3.12[2] and the version provided by appveyor is fresh enough.
Curl doesn't really take that long to build and it is using the slowest
builder available, msbuild, so expect only a moderate improvement in
build times.
[1] https://www.appveyor.com/docs/build-environment/
[2] https://cmake.org/cmake/help/v3.12/release/3.12.html
Closes #4508
- conn-reuse: requests wanting NTLM can reuse non-NTLM connections
Added test case 338 to verify.
Reported-by: Daniel Silverstone
Fixes #4499
Closes #4514
Marcel Raad (23 Oct 2019)
- tests: add missing proxy features
Daniel Stenberg (22 Oct 2019)
- RELEASE-NOTES: synced
Marcel Raad (21 Oct 2019)
- tests: use %FILE_PWD for file:// URLs
This way, we always have exactly one slash after the host name, making
the tests pass when curl is compiled with the MSYS GCC.
Closes https://github.com/curl/curl/pull/4512
- tests: add `connect to non-listen` keywords
These tests try to connect to ports nothing is listening on.
Closes https://github.com/curl/curl/pull/4511
- runtests: get textaware info from curl instead of perl
The MSYS system on Windows can run the test suite for curl built with
any toolset. When built with the MSYS GCC, curl uses Unix line endings,
while it uses Windows line endings when built with the MinGW GCC, and
`^O` reports 'msys' in both cases. Use the curl executable itself to
determine the line endings instead, which reports 'x86_64-pc-msys' when
built with the MSYS GCC.
Closes https://github.com/curl/curl/pull/4506
Daniel Stenberg (20 Oct 2019)
- [Michał Janiszewski brought this change]
appveyor: Add MSVC ARM64 build
Closes #4507
- http2_recv: a closed stream trumps pause state
... and thus should return 0, not EAGAIN.
Reported-by: Tom van der Woerdt
Fixes #4496
Closes #4505
- http2: expire a timeout at end of stream
To make sure that transfer is being dealt with. Streams without
Content-Length need a final read to notice the end-of-stream state.
Reported-by: Tom van der Woerdt
Fixes #4496
Dan Fandrich (18 Oct 2019)
- travis: Add an ARM64 build
Test 323 is failing for some reason, so disable it there for now.
Marcel Raad (18 Oct 2019)
- examples/sslbackend: fix -Wchar-subscripts warning
With the `isdigit` implementation that comes with MSYS2, the argument
is used as an array subscript, resulting in a -Wchar-subscripts
warning. `isdigit`'s behavior is undefined if the argument is negative
and not EOF [0]. As done in lib/curl_ctype.h, cast the `char` variable
to `unsigned char` to avoid that.
[0] https://en.cppreference.com/w/c/string/byte/isdigit
Closes https://github.com/curl/curl/pull/4503
Daniel Stenberg (18 Oct 2019)
- configure: remove all cyassl references
In particular, this removes the case where configure would find an old
cyall installation rather than a wolfssl one if present. The library is
named wolfssl in modern days so there's no real need to keep support for
the former.
Reported-by: Jacob Barthelmeh
Closes #4502
Marcel Raad (17 Oct 2019)
- test1162: disable MSYS2's POSIX path conversion
This avoids MSYS2 converting the backslasb in the URL to a slash,
causing the test to fail.
Daniel Stenberg (17 Oct 2019)
- RELEASE-NOTES: synced
Jay Satiro (16 Oct 2019)
- CURLOPT_TIMEOUT.3: Clarify transfer timeout time includes queue time
Prior to this change some users did not understand that the "request"
starts when the handle is added to the multi handle, or probably they
did not understand that some of those transfers may be queued and that
time is included in timeout.
Reported-by: Jeroen Ooms
Fixes https://github.com/curl/curl/issues/4486
Closes https://github.com/curl/curl/pull/4489
- [Stian Soiland-Reyes brought this change]
tool_operate: Fix retry sleep time shown to user when Retry-After
- If server header Retry-After is being used for retry sleep time then
show that value to the user instead of the normal retry sleep time.
This is a follow-up to 640b973 (7.66.0) which changed curl tool so that
the value from Retry-After header overrides other retry timing options.
Closes https://github.com/curl/curl/pull/4498
Daniel Stenberg (16 Oct 2019)
- url: normalize CURLINFO_EFFECTIVE_URL
The URL extracted with CURLINFO_EFFECTIVE_URL was returned as given as
input in most cases, which made it not get a scheme prefixed like before
if the URL was given without one, and it didn't remove dotdot sequences
etc.
Added test case 1907 to verify that this now works as intended and as
before 7.62.0.
Regression introduced in 7.62.0
Reported-by: Christophe Dervieux
Fixes #4491
Closes #4493
Marcel Raad (16 Oct 2019)
- tests: line ending fixes for Windows
Mark some files as text.
Closes https://github.com/curl/curl/pull/4490
- tests: use proxy feature
This makes the tests succeed when using --disable-proxy.
Closes https://github.com/curl/curl/pull/4488
- smbserver: fix Python 3 compatibility
Python 2's `ConfigParser` module is spelled `configparser` in Python 3.
Closes https://github.com/curl/curl/pull/4484
- security: silence conversion warning
With MinGW-w64, `curl_socket_t` is is a 32 or 64 bit unsigned integer,
while `read` expects a 32 bit signed integer.
Use `sread` instead of `read` to use the correct parameter type.
Closes https://github.com/curl/curl/pull/4483
- connect: silence sign-compare warning
With MinGW-w64 using WinSock, `curl_socklen_t` is signed, while the
result of `sizeof` is unsigned.
Closes https://github.com/curl/curl/pull/4483
Daniel Stenberg (13 Oct 2019)
- TODO: Handle growing SFTP files
Closes #4344
- KNOWN_BUGS: remove "CURLFORM_CONTENTLEN in an array"
The curl_formadd() function is deprecated and shouldn't be used so the
real fix for applications is to switch to the curl_mime_* API.
- KNOWN_BUGS: "LDAP on Windows does authentication wrong"
Closes #3116
- appveyor: add a winbuild that uses VS2017
Closes #4482
- [Harry Sintonen brought this change]
socketpair: fix include and define for older TCP header systems
fixed build for systems that need netinet/in.h for IPPROTO_TCP and are
missing INADDR_LOOPBACK
Closes #4480
- socketpair: fix double-close in error case
Follow-up to bc2dbef0afc08
- gskit: use the generic Curl_socketpair
- asyn-thread: make use of Curl_socketpair() where available
- socketpair: an implemention for Windows and more
Curl_socketpair() is designed to be used and work everywhere if there's
no native version or the native version isn't good enough.
Closes #4466
- RELEASE-NOTES: synced
- connect: return CURLE_OPERATION_TIMEDOUT for errno == ETIMEDOUT
Previosly all connect() failures would return CURLE_COULDNT_CONNECT, no
matter what errno said.
This makes for example --retry work on these transfer failures.
Reported-by: Nathaniel J. Smith
Fixes #4461
Clsoes #4462
- cirrus: switch off blackhole status on the freebsd CI machines
- tests: use port 2 instead of 60000 for a safer non-listening port
... when the tests want "connection refused".
- KNOWN_BUGS: IDN tests failing on Windows
Closes #3747
Dan Fandrich (9 Oct 2019)
- cirrus: Increase the git clone depth.
If more commits are submitted to master between the time of triggering
the first Cirrus build and the time the final build gets started, the
desired commit is no longer at HEAD and the build will error out.
[skip ci]
Daniel Stenberg (9 Oct 2019)
- docs: make sure the --no-progress-meter docs file is in dist too
- docs: document it as --no-progress-meter instead of the reverse
Follow-up to 93373a960c3bb4
Reported-by: infinnovation-dev on github
Fixes #4474
Closes #4475
Dan Fandrich (9 Oct 2019)
- cirrus: Switch the FreeBSD 11.x build to 11.3 and add a 13.0 build.
Also, select the images using image_family to get the latest snapshots
automatically.
[skip ci]
Daniel Stenberg (8 Oct 2019)
- curl: --no-progress-meter
New option that allows a user to ONLY switch off curl's progress meter
and leave everything else in "talkative" mode.
Reported-by: Piotr Komborski
Fixes #4422
Closes #4470
- TODO: Consult %APPDATA% also for .netrc
Closes #4016
- CURLOPT_TIMEOUT.3: remove the mention of "minutes"
... just say that limiting operations risk aborting otherwise fine
working transfers. If that means seconds, minutes or hours, we leave to
the user.
Reported-by: Martin Gartner
Closes #4469
- [Andrei Valeriu BICA brought this change]
docs: added multi-event.c example
Similar to multi-uv.c but using libevent 2. This is a simpler libevent
integration example then hiperfifo.c.
Closes #4471
Jay Satiro (5 Oct 2019)
- [Nicolas brought this change]
ldap: fix OOM error on missing query string
- Allow missing queries, don't return NO_MEMORY error in such a case.
It is acceptable for there to be no specified query string, for example:
curl ldap://ldap.forumsys.com
A regression bug in 1b443a7 caused this issue.
This is a partial fix for #4261.
Bug: https://github.com/curl/curl/issues/4261#issuecomment-525543077
Reported-by: Jojojov@users.noreply.github.com
Analyzed-by: Samuel Surtees
Closes https://github.com/curl/curl/pull/4467
- [Paul B. Omta brought this change]
build: Remove unused HAVE_LIBSSL and HAVE_LIBCRYPTO defines
Closes https://github.com/curl/curl/pull/4460
Daniel Stenberg (5 Oct 2019)
- RELEASE-NOTES: synced
- [Stian Soiland-Reyes brought this change]
curl: ensure HTTP 429 triggers --retry
This completes #3794.
Also make sure the new tests from #4195 are enabled
Closes #4465
Marcel Raad (4 Oct 2019)
- [apique brought this change]
winbuild: add ENABLE_UNICODE option
Fixes https://github.com/curl/curl/issues/4308
Closes https://github.com/curl/curl/pull/4309
Daniel Stenberg (4 Oct 2019)
- ngtcp2: adapt to API change
Closes #4457
- cookies: change argument type for Curl_flush_cookies
The second argument is really a 'bool' so use that and pass in TRUE/FALSE
to make it clear.
Closes #4455
- http2: move state-init from creation to pre-transfer
To make sure that the HTTP/2 state is initialized correctly for
duplicated handles. It would otherwise easily generate "spurious"
PRIORITY frames to get sent over HTTP/2 connections when duplicated easy
handles were used.
Reported-by: Daniel Silverstone
Fixes #4303
Closes #4442
- urlapi: fix use-after-free bug
Follow-up from 2c20109a9b5d04
Added test 663 to verify.
Reported by OSS-Fuzz
Bug: https://crbug.com/oss-fuzz/17954
Closes #4453
- [Paul Dreik brought this change]
cookie: avoid harmless use after free
This fix removes a use after free which can be triggered by
the internal cookie fuzzer, but otherwise is probably
impossible to trigger from an ordinary application.
The following program reproduces it:
curl_global_init(CURL_GLOBAL_DEFAULT);
CURL* handle=curl_easy_init();
CookieInfo* info=Curl_cookie_init(handle,NULL,NULL,false);
curl_easy_setopt(handle, CURLOPT_COOKIEJAR, "/dev/null");
Curl_flush_cookies(handle, true);
Curl_cookie_cleanup(info);
curl_easy_cleanup(handle);
curl_global_cleanup();
This was found through fuzzing.
Closes #4454
- [Denis Chaplygin brought this change]
docs: add note on failed handles not being counted by curl_multi_perform
Closes #4446
- CURLMOPT_MAX_CONCURRENT_STREAMS.3: fix SEE ALSO typo
- [Niall O'Reilly brought this change]
ESNI: initial build/setup
Closes #4011
- RELEASE-NOTES: synced
- redirect: when following redirects to an absolute URL, URL encode it
... to make it handle for example (RFC violating) embeded spaces.
Reported-by: momala454 on github
Fixes #4445
Closes #4447
- urlapi: fix URL encoding when setting a full URL
- tool_operate: rename functions to make more sense
- curl: create easy handles on-demand and not ahead of time
This should again enable crazy-large download ranges of the style
[1-10000000] that otherwise easily ran out of memory starting in 7.66.0
when this new handle allocating scheme was introduced.
Reported-by: Peter Sumatra
Fixes #4393
Closes #4438
- [Kunal Ekawde brought this change]
CURLMOPT_MAX_CONCURRENT_STREAMS: new setopt
Closes #4410
- chunked-encoding: stop hiding the CURLE_BAD_CONTENT_ENCODING error
Unknown content-encoding would get returned as CURLE_WRITE_ERROR if the
response is chunked-encoded.
Reported-by: Ilya Kosarev
Fixes #4310
Closes #4449
Marcel Raad (1 Oct 2019)
- checksrc: fix uninitialized variable warning
The loop doesn't need to be executed without a file argument.
Closes https://github.com/curl/curl/pull/4444
- urlapi: fix unused variable warning
`dest` is only used with `ENABLE_IPV6`.
Closes https://github.com/curl/curl/pull/4444
- lib: silence conversion warnings
Closes https://github.com/curl/curl/pull/4444
- AppVeyor: add 32-bit MinGW-w64 build
With WinSSL and testing enabled so that it would have detected most of
the warnings fixed in [0] and [1].
[0] https://github.com/curl/curl/pull/4398
[1] https://github.com/curl/curl/pull/4415
Closes https://github.com/curl/curl/pull/4433
- AppVeyor: remove MSYS2_ARG_CONV_EXCL for winbuild
It's only used for MSYS2 with MinGW.
Closes
Daniel Stenberg (30 Sep 2019)
- [Emil Engler brought this change]
git: add tests/server/disabled to .gitignore
Closes #4441
- altsvc: accept quoted ma and persist values
As mandated by the spec. Test 1654 is extended to verify.
Closes #4443
- mailmap: a Lucas fix
Alessandro Ghedini (29 Sep 2019)
- [Lucas Pardue brought this change]
quiche: update HTTP/3 config creation to new API
Daniel Stenberg (29 Sep 2019)
- BINDINGS: PureBasic, Net::Curl for perl and Nim
- BINDINGS: Kapito is an Erlang library, basically a binding
- BINDINGS: added clj-curl
Reported-by: Lucas Severo
- [Jay Satiro brought this change]
docs: disambiguate CURLUPART_HOST is for host name (ie no port)
Closes #4424
- cookies: using a share with cookies shouldn't enable the cookie engine
The 'share object' only sets the storage area for cookies. The "cookie
engine" still needs to be enabled or activated using the normal cookie
options.
This caused the curl command line tool to accidentally use cookies
without having been told to, since curl switched to using shared cookies
in 7.66.0.
Test 1166 verifies
Updated test 506
Fixes #4429
Closes #4434
- setopt: handle ALTSVC set to NULL
- RELEASE-NOTES: synced
- [grdowns brought this change]
INSTALL: add vcpkg installation instructions
Closes #4435
- [Zenju brought this change]
FTP: add test for FTPFILE_NOCWD: Avoid redundant CWDs
Add libtest 661
Closes #4417
- [Zenju brought this change]
FTP: url-decode path before evaluation
Closes #4428
Marcel Raad (27 Sep 2019)
- tests: fix narrowing conversion warnings
`timediff_t` is 64 bits wide also on 32-bit systems since
commit b1616dad8f0.
Closes https://github.com/curl/curl/pull/4415
Jay Satiro (27 Sep 2019)
- [julian brought this change]
vtls: Fix comment typo about macosx-version-min compiler flag
Closes https://github.com/curl/curl/pull/4425
Daniel Stenberg (26 Sep 2019)
- [Yechiel Kalmenson brought this change]
README: minor grammar fix
Closes #4431
- [Spezifant brought this change]
HTTP3: fix prefix parameter for ngtcp2 build
Closes #4430
- quiche: don't close connection at end of stream!
- quiche: set 'drain' when returning without having drained the queues
- Revert "FTP: url-decode path before evaluation"
This reverts commit 2f036a72d543e96128bd75cb0fedd88815fd42e2.
- HTTP3: merged and simplified the two 'running' sections
- HTTP3: show an --alt-svc using example too
- [Zenju brought this change]
FTP: url-decode path before evaluation
Closes #4423
- openssl: use strerror on SSL_ERROR_SYSCALL
Instead of showing the somewhat nonsensical errno number, use strerror()
to provide a more relatable error message.
Closes #4411
- HTTP3: update quic.aiortc.org + add link to server list
Reported-by: Jeremy Lainé
Jay Satiro (26 Sep 2019)
- url: don't set appconnect time for non-ssl/non-ssh connections
Prior to this change non-ssl/non-ssh connections that were reused set
TIMER_APPCONNECT [1]. Arguably that was incorrect since no SSL/SSH
handshake took place.
[1]: TIMER_APPCONNECT is publicly known as CURLINFO_APPCONNECT_TIME in
libcurl and %{time_appconnect} in the curl tool. It is documented as
"the time until the SSL/SSH handshake is completed".
Reported-by: Marcel Hernandez
Ref: https://github.com/curl/curl/issues/3760
Closes https://github.com/curl/curl/pull/3773
Daniel Stenberg (25 Sep 2019)
- ngtcp2: remove fprintf() calls
- convert some of them to H3BUF() calls to infof()
- remove some of them completely
- made DEBUG_HTTP3 defined only if CURLDEBUG is set for now
Closes #4421
- [Jay Satiro brought this change]
url: fix the NULL hostname compiler warning case
Closes #4403
- [Jay Satiro brought this change]
travis: move the go install to linux-only
... to repair the build again
Closes #4403
- altsvc: correct the #ifdef for the ngtcp2 backend
- altsvc: save h3 as h3-23
Follow-up to d176a2c7e5
- urlapi: question mark within fragment is still fragment
The parser would check for a query part before fragment, which caused it
to do wrong when the fragment contains a question mark.
Extended test 1560 to verify.
Reported-by: Alex Konev
Fixes #4412
Closes #4413
- [Alex Samorukov brought this change]
HTTP3.md: move -p for mkdir, remove -j for make
- mkdir on OSX/Darwin requires `-p` argument before dir
- portabbly figuring out number of cores is an exercise for somewhere
else
Closes #4407
Patrick Monnerat (24 Sep 2019)
- os400: getpeername() and getsockname() return ebcdic AF_UNIX sockaddr,
As libcurl now uses these 2 system functions, wrappers are needed on os400
to convert returned AF_UNIX sockaddrs to ascii.
This is a follow-up to commit 7fb54ef.
See also #4037.
Closes #4214
Jay Satiro (24 Sep 2019)
- [Lucas Pardue brought this change]
strcase: fix raw lowercasing the letter X
Casing mistake in Curl_raw_tolower 'X' wasn't lowercased as 'x' prior to
this change.
Follow-up to 0023fce which added the function several days ago.
Ref: https://github.com/curl/curl/pull/4401#discussion_r327396546
Closes https://github.com/curl/curl/pull/4408
Daniel Stenberg (23 Sep 2019)
- http2: Expression 'stream->stream_id != - 1' is always true
PVS-Studio warning
Fixes #4402
- http2: A value is being subtracted from the unsigned variable
PVS-Studio warning
Fixes #4402
- libssh: part of conditional expression is always true: !result
PVS-Studio warning
Fixed #4402
- libssh: part of conditional expression is always true
PVS-Studio warning
Fixes #4402
- libssh: The expression is excessive or contains a misprint
PVS-Studio warning
Fixes #4402
- quiche: The expression must be surrounded by parentheses
PVS-Studio warning
Fixes #4402
- vauth: The parameter 'status' must be surrounded by parentheses
PVS-Studio warning
Fixes #4402
- [Paul Dreik brought this change]
doh: allow only http and https in debug mode
Otherwise curl may be told to use for instance pop3 to
communicate with the doh server, which most likely
is not what you want.
Found through fuzzing.
Closes #4406
- [Paul Dreik brought this change]
doh: return early if there is no time left
Closes #4406
- [Barry Pollard brought this change]
http: lowercase headernames for HTTP/2 and HTTP/3
Closes #4401
Fixes #4400
Marcel Raad (23 Sep 2019)
- vtls: fix narrowing conversion warnings
Curl_timeleft returns `timediff_t`, which is 64 bits wide also on
32-bit systems since commit b1616dad8f0.
Closes https://github.com/curl/curl/pull/4398
Daniel Stenberg (23 Sep 2019)
- [Joel Depooter brought this change]
winbuild: Add manifest to curl.exe for proper OS version detection
This is a small fix to commit ebd213270a017a6830928ee2e1f4a9cabc799898
in pull request #1221. That commit added the CURL_EMBED_MANIFEST flag to
CURL_RC_FLAGS. However, later in the file CURL_RC_FLAGS is
overwritten. The fix is to append values to CURL_RC_FLAGS instead of
overwriting
Closes #4399
- RELEASE-NOTES: synced
Marcel Raad (22 Sep 2019)
- openssl: fix compiler warning with LibreSSL
It was already fixed for BoringSSL in commit a0f8fccb1e0.
LibreSSL has had the second argument to SSL_CTX_set_min_proto_version
as uint16_t ever since the function was added in [0].
[0] https://github.com/libressl-portable/openbsd/commit/56f107201baefb5533486d665a58d8f57fd3aeda
Closes https://github.com/curl/curl/pull/4397
Daniel Stenberg (22 Sep 2019)
- curl: exit the create_transfers loop on errors
When looping around the ranges and given URLs to create transfers, all
errors should exit the loop and return. Previously it would keep
looping.
Reported-by: SumatraPeter on github
Bug: #4393
Closes #4396
Jay Satiro (21 Sep 2019)
- socks: Fix destination host shown on SOCKS5 error
Prior to this change when a server returned a socks5 connect error then
curl would parse the destination address:port from that data and show it
to the user as the destination:
curld -v --socks5 10.0.3.1:1080 http://google.com:99
* SOCKS5 communication to google.com:99
* SOCKS5 connect to IPv4 172.217.12.206 (locally resolved)
* Can't complete SOCKS5 connection to 253.127.0.0:26673. (1)
curl: (7) Can't complete SOCKS5 connection to 253.127.0.0:26673. (1)
That's incorrect because the address:port included in the connect error
is actually a bind address:port (typically unused) and not the
destination address:port. This fix changes curl to show the destination
information that curl sent to the server instead:
curld -v --socks5 10.0.3.1:1080 http://google.com:99
* SOCKS5 communication to google.com:99
* SOCKS5 connect to IPv4 172.217.7.14:99 (locally resolved)
* Can't complete SOCKS5 connection to 172.217.7.14:99. (1)
curl: (7) Can't complete SOCKS5 connection to 172.217.7.14:99. (1)
curld -v --socks5-hostname 10.0.3.1:1080 http://google.com:99
* SOCKS5 communication to google.com:99
* SOCKS5 connect to google.com:99 (remotely resolved)
* Can't complete SOCKS5 connection to google.com:99. (1)
curl: (7) Can't complete SOCKS5 connection to google.com:99. (1)
Ref: https://tools.ietf.org/html/rfc1928#section-6
Closes https://github.com/curl/curl/pull/4394
Daniel Stenberg (21 Sep 2019)
- travis: enable ngtcp2 h3-23 builds
- altsvc: both backends run h3-23 now
Closes #4395
- http: fix warning on conversion from int to bit
Follow-up from 03ebe66d70
- urldata: use 'bool' for the bit type on MSVC compilers
Closes #4387
Fixes #4379
- appveyor: upgrade VS2017 to VS2019
Closes #4383
- [Zenju brought this change]
FTP: FTPFILE_NOCWD: avoid redundant CWDs
Closes #4382
- cookie: pass in the correct cookie amount to qsort()
As the loop discards cookies without domain set. This bug would lead to
qsort() trying to sort uninitialized pointers. We have however not found
it a security problem.
Reported-by: Paul Dreik
Closes #4386
- [Paul Dreik brought this change]
urlapi: avoid index underflow for short ipv6 hostnames
If the input hostname is "[", hlen will underflow to max of size_t when
it is subtracted with 2.
hostname[hlen] will then cause a warning by ubsanitizer:
runtime error: addition of unsigned offset to 0x<snip> overflowed to
0x<snip>
I think that in practice, the generated code will work, and the output
of hostname[hlen] will be the first character "[".
This can be demonstrated by the following program (tested in both clang
and gcc, with -O3)
int main() {
char* hostname=strdup("[");
size_t hlen = strlen(hostname);
hlen-=2;
hostname++;
printf("character is %d\n",+hostname[hlen]);
free(hostname-1);
}
I found this through fuzzing, and even if it seems harmless, the proper
thing is to return early with an error.
Closes #4389
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: compile with latest ngtcp2 + nghttp3 draft-23
Closes #4392
- THANKS-filter: deal with my typos 'Jat' => 'Jay'
- travis: use go master
... as the boringssl builds needs a very recent version
Co-authored-by: Jat Satiro
Closes #4361
- tool_operate: removed unused variable 'done'
Fixes warning detected by PVS-Studio
Fixes #4374
- tool_operate: Expression 'config->resume_from' is always true
Fixes warning detected by PVS-Studio
Fixes #4374
- tool_getparam: remove duplicate switch case
Fixes warning detected by PVS-Studio
Fixes #4374
- libssh2: part of conditional expression is always true: !result
Fixes warning detected by PVS-Studio
Fixes #4374
- urlapi: Expression 'storep' is always true
Fixes warning detected by PVS-Studio
Fixes #4374
- urlapi: 'scheme' is always true
Fixes warning detected by PVS-Studio
Fixes #4374
- urlapi: part of conditional expression is always true: (relurl[0] == '/')
Fixes warning detected by PVS-Studio
Fixes #4374
- setopt: store CURLOPT_RTSP_SERVER_CSEQ correctly
Fixes bug detected by PVS-Studio
Fixes #4374
- mime: make Curl_mime_duppart() assert if called without valid dst
Fixes warning detected by PVS-Studio
Fixes #4374
- http_proxy: part of conditional expression is always true: !error
Fixes warning detected by PVS-Studio
Fixes #4374
- imap: merged two case-branches performing the same action
Fixes warning detected by PVS-Studio
Fixes #4374
- multi: value '2L' is assigned to a boolean
Fixes warning detected by PVS-Studio
Fixes #4374
- easy: part of conditional expression is always true: !result
Fixes warning detected by PVS-Studio
Fixes #4374
- netrc: part of conditional expression is always true: !done
Fixes warning detected by PVS-Studio
Fixes #4374
- version: Expression 'left > 1' is always true
Fixes warning detected by PVS-Studio
Fixes #4374
- url: remove dead code
Fixes warning detected by PVS-Studio
Fixes #4374
- url: part of expression is always true: (bundle->multiuse == 0)
Fixes warning detected by PVS-Studio
Fixes #4374
- ftp: the conditional expression is always true
... both !result and (ftp->transfer != FTPTRANSFER_BODY)!
Fixes warning detected by PVS-Studio
Fixes #4374
- ftp: Expression 'ftpc->wait_data_conn' is always false
Fixes warning detected by PVS-Studio
Fixes #4374
- ftp: Expression 'ftpc->wait_data_conn' is always true
Fixes warning detected by PVS-Studio
Fixes #4374
- ftp: part of conditional expression is always true: !result
Fixes warning detected by PVS-Studio
Fixes #4374
- http: fix Expression 'http->postdata' is always false
Fixes warning detected by PVS-Studio
Fixes #4374
Reported-by: Valerii Zapodovnikov
- [Niall O'Reilly brought this change]
doh: avoid truncating DNS QTYPE to lower octet
Closes #4381
- [Jens Finkhaeuser brought this change]
urlapi: CURLU_NO_AUTHORITY allows empty authority/host part
CURLU_NO_AUTHORITY is intended for use with unknown schemes (i.e. not
"file:///") to override cURL's default demand that an authority exists.
Closes #4349
- version: next release will be 7.67.0
- RELEASE-NOTES: synced
- url: only reuse TLS connections with matching pinning
If the requests have different CURLOPT_PINNEDPUBLICKEY strings set, the
connection should not be reused.
Bug: https://curl.haxx.se/mail/lib-2019-09/0061.html
Reported-by: Sebastian Haglund
Closes #4347
- README: add OSS-Fuzz badge [skip ci]
Closes #4380
Michael Kaufmann (18 Sep 2019)
- http: merge two "case" statements
Daniel Stenberg (18 Sep 2019)
- [Zenju brought this change]
FTP: remove trailing slash from path for LIST/MLSD
Closes #4348
- mime: when disabled, avoid C99 macro
Closes #4368
- url: cleanup dangling DOH request headers too
Follow-up to 9bc44ff64d9081
Credit to OSS-Fuzz
Bug: https://crbug.com/oss-fuzz/17269
Closes #4372
- [Christoph M. Becker brought this change]
http2: relax verification of :authority in push promise requests
If the :authority pseudo header field doesn't contain an explicit port,
we assume it is valid for the default port, instead of rejecting the
request for all ports.
Ref: https://curl.haxx.se/mail/lib-2019-09/0041.html
Closes #4365
- doh: clean up dangling DOH handles and memory on easy close
If you set the same URL for target as for DoH (and it isn't a DoH
server), like "https://example.com" in both, the easy handles used for
the DoH requests could be left "dangling" and end up not getting freed.
Reported-by: Paul Dreik
Closes #4366
- unit1655: make it C90 compliant
Unclear why this was not detected in the CI.
Follow-up to b7666027296a
- smb: check for full size message before reading message details
To avoid reading of uninitialized data.
Assisted-by: Max Dymond
Bug: https://crbug.com/oss-fuzz/16907
Closes #4363
- quiche: persist connection details
... like we do for other protocols at connect time. This makes "curl -I"
and other things work.
Reported-by: George Liu
Fixes #4358
Closes #4360
- openssl: fix warning with boringssl and SSL_CTX_set_min_proto_version
Follow-up to ffe34b7b59
Closes #4359
- [Paul Dreik brought this change]
doh: fix undefined behaviour and open up for gcc and clang optimization
The undefined behaviour is annoying when running fuzzing with
sanitizers. The codegen is the same, but the meaning is now not up for
dispute. See https://cppinsights.io/s/516a2ff4
By incrementing the pointer first, both gcc and clang recognize this as
a bswap and optimizes it to a single instruction. See
https://godbolt.org/z/994Zpx
Closes #4350
- [Paul Dreik brought this change]
doh: fix (harmless) buffer overrun
Added unit test case 1655 to verify.
Close #4352
the code correctly finds the flaws in the old code,
if one temporarily restores doh.c to the old version.
Alessandro Ghedini (15 Sep 2019)
- docs: remove trailing ':' from section names in CURLOPT_TRAILER* man
- docs: fix typo in CURLOPT_HTTP_VERSION man
GitHub (14 Sep 2019)
- [Daniel Stenberg brought this change]
CI: inintial github action job
First shot at a CI build on github actions
Daniel Stenberg (13 Sep 2019)
- appveyor: add a winbuild
Assisted-by: Marcel Raad
Assisted-by: Jay Satiro
Closes #4324
- FTP: allow "rubbish" prepended to the SIZE response
This is a protocol violation but apparently there are legacy proprietary
servers doing this.
Added test 336 and 337 to verify.
Reported-by: Philippe Marguinaud
Closes #4339
- [Zenju brought this change]
FTP: skip CWD to entry dir when target is absolute
Closes #4332
Kamil Dudka (13 Sep 2019)
- curl: fix memory leaked by parse_metalink()
This commit fixes a regression introduced by curl-7_65_3-5-gb88940850.
Detected by tests 2005, 2008, 2009, 2010, 2011, and 2012 with valgrind
and libmetalink enabled.
Closes #4326
Daniel Stenberg (13 Sep 2019)
- parsedate: still provide the name arrays when disabled
If FILE or FTP are enabled, since they also use them!
Reported-by: Roland Hieber
Fixes #4325
Closes #4343
- [Gilles Vollant brought this change]
curl:file2string: load large files much faster
... by using a more efficient realloc scheme.
Bug: https://curl.haxx.se/mail/lib-2019-09/0045.html
Closes #4336
- openssl: close_notify on the FTP data connection doesn't mean closure
For FTPS transfers, curl gets close_notify on the data connection
without that being a signal to close the control connection!
Regression since 3f5da4e59a556fc (7.65.0)
Reported-by: Zenju on github
Reviewed-by: Jay Satiro
Fixes #4329
Closes #4340
- [Jimmy Gaussen brought this change]
docs/HTTP3: fix `--with-ssl` ngtcp2 configure flag
Closes #4338
- RELEASE-NOTES: synced
- curlver: bump to 7.66.1
- [Zenju brought this change]
setopt: make it easier to add new enum values
... by using the *_LAST define names better.
Closes #4321
- asyn-thread: s/AF_LOCAL/AF_UNIX for Solaris
Reported-by: Dagobert Michelsen
Fixes #4328
Closes #4333
- [Bernhard Walle brought this change]
winbuild/MakefileBuild.vc: Add vssh
Without that modification, the Windows build using the makefiles doesn't
work.
Signed-off-by: Bernhard Walle <bernhard.walle@posteo.eu>
Fixes #4322
Closes #4323
Bernhard Walle (11 Sep 2019)
- winbuild/MakefileBuild.vc: Fix line endings
The file had mixed line endings.
Signed-off-by: Bernhard Walle <bernhard.walle@posteo.eu>
Jay Satiro (11 Sep 2019)
- ldap: Stop using wide char version of ldapp_err2string
Despite ldapp_err2string being documented by MS as returning a
PCHAR (char *), when UNICODE it is mapped to ldap_err2stringW and
returns PWCHAR (wchar_t *).
We have lots of code that expects ldap_err2string to return char *,
most of it failf used like this:
failf(data, "LDAP local: Some error: %s", ldap_err2string(rc));
Closes https://github.com/curl/curl/pull/4272
Version 7.66.0 (10 Sep 2019)
Daniel Stenberg (10 Sep 2019)
- RELEASE-NOTES: curl 7.66.0
- THANKS: from the 7.66.0 release
- curl: make sure the parallel transfers do them all
The logic could erroneously break the loop too early before all
transfers had been transferred.
Reported-by: Tom van der Woerdt
Fixes #4316
Closes #4317
- urlapi: one colon is enough for the strspn() input (typo)
- urlapi: verify the IPv6 numerical address
It needs to parse correctly. Otherwise it could be tricked into letting
through a-f using host names that libcurl would then resolve. Like
'[ab.be]'.
Reported-by: Thomas Vegas
Closes #4315
- [Clément Notin brought this change]
openssl: use SSL_CTX_set_<min|max>_proto_version() when available
OpenSSL 1.1.0 adds SSL_CTX_set_<min|max>_proto_version() that we now use
when available. Existing code is preserved for older versions of
OpenSSL.
Closes #4304
- [Clément Notin brought this change]
openssl: indent, re-organize and add comments
- [migueljcrum brought this change]
sspi: fix memory leaks
Closes #4299
- travis: disable ngtcp2 builds (again)
- Curl_fillreadbuffer: avoid double-free trailer buf on error
Reviewed-by: Jay Satiro
Reported-by: Thomas Vegas
Closes #4307
- tool_setopt: handle a libcurl build without netrc support
Reported-by: codesniffer13 on github
Fixes #4302
Closes #4305
- security:read_data fix bad realloc()
... that could end up a double-free
CVE-2019-5481
Bug: https://curl.haxx.se/docs/CVE-2019-5481.html
- [Thomas Vegas brought this change]
tftp: Alloc maximum blksize, and use default unless OACK is received
Fixes potential buffer overflow from 'recvfrom()', should the server
return an OACK without blksize.
Bug: https://curl.haxx.se/docs/CVE-2019-5482.html
CVE-2019-5482
- [Thomas Vegas brought this change]
tftp: return error when packet is too small for options
- KNOWN_BUGS/TODO: cleanup and remove outdated issues
- RELEASE-NOTES: synced
- netrc: free 'home' on error
Follow-up to f9c7ba9096ec2
Coverity CID 1453474
Closes #4291
- urldata: avoid 'generic', use dedicated pointers
For the 'proto' union within the connectdata struct.
Closes #4290
- cleanup: move functions out of url.c and make them static
Closes #4289
- smtp: check for and bail out on too short EHLO response
Otherwise, a three byte response would make the smtp_state_ehlo_resp()
function misbehave.
Credit to OSS-Fuzz
Bug: https://crbug.com/oss-fuzz/16918
Assisted-by: Max Dymond
Closes #4287
- smb: init *msg to NULL in smb_send_and_recv()
... it might otherwise return OK from this function leaving that pointer
uninitialized.
Bug: https://crbug.com/oss-fuzz/16907
Closes #4286
- ROADMAP: updated after recent user poll
In rough prio order
- THANKS: remove duplicate
- Curl_addr2string: take an addrlen argument too
This allows the function to figure out if a unix domain socket has a
file name or not associated with it! When a socket is created with
socketpair(), as done in the fuzzer testing, the path struct member is
uninitialized and must not be accessed.
Bug: https://crbug.com/oss-fuzz/16699
Closes #4283
- [Rolf Eike Beer brought this change]
CMake: remove needless newlines at end of gss variables
- [Rolf Eike Beer brought this change]
CI: remove duplicate configure flag for LGTM.com
- [Rolf Eike Beer brought this change]
CMake: use platform dependent name for dlopen() library
Closes #4279
- quiche: expire when poll returned data
... to make sure we continue draining the queue until empty
Closes #4281
- quiche: decrease available buffer size, don't assign it!
Found-by: Jeremy Lainé
- RELEASE-NOTES: synced
- [Kyohei Kadota brought this change]
curl: fix include conditions
- [Kyohei Kadota brought this change]
plan9: fix installation instructions
Closes #4276
- ngtcp2: on h3 stream close, call expire
... to trigger a new read to detect the stream close!
Closes #4275
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: build latest ngtcp2 and ngtcp2_crypto_openssl
Closes #4278
- ngtcp2: set flow control window to stream buffer size
Closes #4274
- [Christopher Head brought this change]
CURLOPT_HEADERFUNCTION.3: clarify
Closes #4273
- CURLINFO docs: mention that in redirects times are added
Suggested-by: Brandon Dong
Fixes #4250
Closes #4269
- travis: enable ngtcp2 builds again
Switched to the openssl-quic-draft-22 openssl branch.
Closes #4271
- HTTP3: switched openssl branch to use
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: Build with latest ngtcp2 and ngtcp2_crypto_openssl
Closes #4270
- http2: when marked for closure and wanted to close == OK
It could otherwise return an error even when closed correctly if GOAWAY
had been received previously.
Reported-by: Tom van der Woerdt
Fixes #4267
Closes #4268
- RELEASE-NOTES: synced
- build-openssl: fix build with Visual Studio 2019
Reviewed-by: Marcel Raad
Contributed-by: osabc on github
Fixes #4188
Closes #4266
Kamil Dudka (26 Aug 2019)
- vauth: return CURLE_AUTH_ERROR on gss_init_sec_context() failure
This is a follow-up to https://github.com/curl/curl/pull/3864 .
Closes #4224
Daniel Stenberg (26 Aug 2019)
- KNOWN_BUGS: USE_UNIX_SOCKETS on Windows
Closes #4040
- quiche: send the HTTP body correctly on callback uploads
Closes #4265
- travis: disable ngtcp2 builds (temporarily)
Just too many API changes right now
Closes #4264
- ngtcp2: add support for SSLKEYLOGFILE
Closes #4260
- ngtcp2: improve h3 response receiving
Closes #4259
- ngtcp2: use nghttp3_version()
- ngtcp2: sync with upstream API changes
Assisted-by: Tatsuhiro Tsujikawa
- [Kyle Abramowitz brought this change]
scp: fix directory name length used in memcpy
Fix read off end of array due to bad pointer math in getworkingpath for
SCP home directory case.
Closes #4258
- http: the 'closed' struct field is used by both ngh2 and ngh3
and remove 'header_recvbuf', not used for anything
Reported-by: Jeremy Lainé
Closes #4257
- ngtcp2: accept upload via callback
Closes #4256
- defines: avoid underscore-prefixed defines
Double-underscored or underscore plus uppercase letter at least.
... as they're claimed to be reserved.
Reported-by: patnyb on github
Fixes #4254
Closes #4255
- travis: add a build using ngtcp2 + nghttp3 (and a patched OpenSSL)
Runs no tests
Closes #4253
- travis: bump to using nghttp2 version 1.39.2
Closes #4252
- [Gisle Vanem brought this change]
docs/examples/curlx: fix errors
Initialise 'mimetype' and require the -p12 arg.
Closes #4248
- cleanup: remove DOT_CHAR completely
Follow-up to f9c7ba9096ec
The use of DOT_CHAR for ".ssh" was probably a mistake and is removed
now.
Pointed-out-by: Gisle Vanem
Bug: https://github.com/curl/curl/pull/4230#issuecomment-522960638
Closes #4247
- spnego_sspi: add typecast to fix build warning
Reported in build "Win32 target on Debian Stretch (64-bit) -
i686-w64-mingw32 - gcc-20170516"
Closes #4245
- openssl: build warning free with boringssl
Closes #4244
- curl: make --libcurl use CURL_HTTP_VERSION_3
Closes #4243
- ngtcp2: make postfields-set posts work
Closes #4242
- http: remove chunked-encoding and expect header use for HTTP/3
- [Alessandro Ghedini brought this change]
configure: use pkg-config to detect quiche
This removes the need to hard-code the quiche target path in
configure.ac.
This depends on https://github.com/cloudflare/quiche/pull/128
Closes #4237
- CURLOPT_SSL_VERIFYHOST: treat the value 1 as 2
For a long time (since 7.28.1) we've returned error when setting the
value to 1 to make applications notice that we stopped supported the old
behavior for 1. Starting now, we treat 1 and 2 exactly the same.
Closes #4241
- curl: use .curlrc (with a dot) on Windows as well
Fall-back to _curlrc if the dot-version is missing.
Co-Authored-By: Steve Holme
Closes #4230
- netrc: make the code try ".netrc" on Windows as well
... but fall back and try "_netrc" too if the dot version didn't work.
Co-Authored-By: Steve Holme
- ngtcp2: use ngtcp2_version() to get the run-time version
... which of course doesn't have to be the same used at build-time.
Function just recently merged in ngtcp2.
- ngtcp2: move the h3 initing to immediately after the rx key
To fix a segfault and to better deal with 0-RTT
Assisted-by: Tatsuhiro Tsujikawa
- [Alessandro Ghedini brought this change]
quiche: register debug callback once and earlier
The quiche debug callback is global and can only be initialized once, so
make sure we don't do it multiple times (e.g. if multiple requests are
executed).
In addition this initializes the callback before the connection is
created, so we get logs for the handshake as well.
Closes #4236
- ssh: add a generic Curl_ssh_version function for SSH backends
Closes #4235
- base64: check for SSH, not specific SSH backends
- vssh: move ssh init/cleanup functions into backend code
- vssh: create directory for SSH backend code
- TODO/ROADMAP: remove "refuse downgrade redirects" and HTTP/3
HTTP3 is now already in full progress
Downgrade redirects can be achived almost exactly like that by setting
CURLOPT_REDIR_PROTOCOLS.
- RELEASE-NOTES: synced
- travis: add a quiche build
Closes #4207
- http: fix use of credentials from URL when using HTTP proxy
When a username and password are provided in the URL, they were wrongly
removed from the stored URL so that subsequent uses of the same URL
wouldn't find the crendentials. This made doing HTTP auth with multiple
connections (like Digest) mishave.
Regression from 46e164069d1a5230 (7.62.0)
Test case 335 added to verify.
Reported-by: Mike Crowe
Fixes #4228
Closes #4229
- [Mike Crowe brought this change]
tests: Replace outdated test case numbering documentation
Tests are no longer grouped by numeric range[1]. Let's stop saying that
and provide some alternative advice for numbering tests.
[1] https://curl.haxx.se/mail/lib-2019-08/0043.html
Closes #4227
- travis: reduce number of torture tests in 'coverage'
... to make it complete in time. This cut seems not almost not affect
the coverage percentage and yet completes within 35 minutes on travis
where the previous runs recently always timed out after 50.
Closes #4223
- [Igor Makarov brought this change]
configure: use -lquiche to link to quiche
Closes #4226
- ngtcp2: provide the callbacks as a static struct
... instead of having them in quicsocket
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: add missing nghttp3_conn_add_write_offset call
Closes #4225
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: deal with stream close
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: Consume QUIC STREAM data properly
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: don't reinitialize SSL on Retry
- multi: getsock improvements for QUIC connecting
- connect: connections are persistent by default for HTTP/3
- quiche: happy eyeballs
Closes #4220
- ngtcp2: do QUIC connections happy-eyeballs friendly
- curl_version: bump string buffer size to 250
With HTTP/3 libs and plenty TLS libs, I manged to hit the limit (which
causes a truncated output).
- CURLOPT_ALTSVC.3: use a "" file name to not load from a file
Jay Satiro (14 Aug 2019)
- vauth: Use CURLE_AUTH_ERROR for auth function errors
- Add new error code CURLE_AUTH_ERROR.
Prior to this change auth function errors were signaled by
CURLE_OUT_OF_MEMORY and CURLE_RECV_ERROR, and neither one was
technically correct.
Ref: https://github.com/curl/curl/pull/3848
Co-authored-by: Dominik Hölzl
Closes https://github.com/curl/curl/pull/3864
Daniel Stenberg (13 Aug 2019)
- curl_version_info: make the quic_version a const
Follow-up from 1a2df1518ad8653f
Closes #4222
- examples: add http3.c, altsvc.c and http3-present.c
Closes #4221
Peter Wu (13 Aug 2019)
- nss: use TLSv1.3 as default if supported
SSL_VersionRangeGetDefault returns (TLSv1.0, TLSv1.2) as supported
range in NSS 3.45. It looks like the intention is to raise the minimum
version rather than lowering the maximum, so adjust accordingly. Note
that the caller (nss_setup_connect) initializes the version range to
(TLSv1.0, TLSv1.3), so there is no need to check for >= TLSv1.0 again.
Closes #4187
Reviewed-by: Daniel Stenberg
Reviewed-by: Kamil Dudka
Daniel Stenberg (13 Aug 2019)
- quic.h: remove unused proto
- curl_version_info.3: mentioned ALTSVC and HTTP3
... and sorted the list alphabetically
- lib/quic.c: unused - removed
- CURLOPT_ALTSVC_CTRL.3: remove CURLALTSVC_ALTUSED
Follow-up to 98c3f148 that removed it from the header file
- [Junho Choi brought this change]
docs/HTTP3: simplify quiche build instruction
Use --recursive to get boringssl in one line
Closes #4219
- altsvc: make it use h3-22 with ngtcp2 as well
- ngtcp2: initial h3 request work
Closes #4217
- curl_version_info: offer quic (and h3) library info
Closes #4216
- HTTP3: use ngtcp2's draft-22 branch
- RELEASE-NOTES: synced
- CURLOPT_READFUNCTION.3: provide inline example
... instead of mentioning one in another place
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: send HTTP/3 request with nghttp3
This commit makes sending HTTP/3 request with nghttp3 work. It
minimally receives HTTP response and calls nghttp3 callbacks, but no
processing is made at the moment.
Closes #4215
- nghttp3: initial h3 template code added
- nghttp3: required when ngtcp2 is used for QUIC
- checked for by configure
- updated docs/HTTP3.md
- shown in the version string
Closes #4210
- [Eric Wong brought this change]
asyn-thread: issue CURL_POLL_REMOVE before closing socket
This avoids EBADF errors from EPOLL_CTL_DEL operations in the
ephiperfifo.c example. EBADF is dangerous in multi-threaded
applications where I rely on epoll_ctl to operate on the same
epoll description from different threads.
Follow-up to eb9a604f8d7db8
Bug: https://curl.haxx.se/mail/lib-2019-08/0026.html
Closes #4211
- [Carlo Marcelo Arenas Belón brought this change]
configure: avoid undefined check_for_ca_bundle
instead of using a "greater than 0" test, check for variable being
set, as it is always set to 1, and could be left unset if non of
OPENSSL MBEDTLS GNUTLS WOLFSSL is being configured for.
Closes #4213
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: Send ALPN h3-22
Closes #4212
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: use ngtcp2_settings_default and specify initial_ts
- curl_global_init_mem.3: mention it was added in 7.12.0
- [Tatsuhiro Tsujikawa brought this change]
ngtcp2: make the QUIC handshake work
Closes #4209
- [Alex Mayorga brought this change]
HTTP3.md: Update quiche build instructions
Added cloning for quiche and BoringSSL and modified the build
instructions so they work on a clean folder.
Closes #4208
- CURLOPT_H3: removed
There's no use for this anymore and it was never in a release.
Closes #4206
- http3: make connection reuse work
Closes #4204
- quiche: add SSLKEYLOGFILE support
- cleanup: s/curl_debug/curl_dbg_debug in comments and docs
Leftovers from the function rename back in 76b63489495
Reported-by: Gisle Vanem
Bug: https://github.com/curl/curl/commit/f3e0f071b14fcb46a453f69bdf4e062bcaacf362#com
mitcomment-34601751
Closes #4203
- RELEASE-NOTES: synced
- alt-svc: add protocol version selection masking
So that users can mask in/out specific HTTP versions when Alt-Svc is
used.
- Removed "h2c" and updated test case accordingly
- Changed how the altsvc struct is laid out
- Added ifdefs to make the unittest run even in a quiche-tree
Closes #4201
- http3: fix the HTTP/3 in the request, make alt-svc set right versions
Closes #4200
- alt-svc: send Alt-Used: in redirected requests
RFC 7838 section 5:
When using an alternative service, clients SHOULD include an Alt-Used
header field in all requests.
Removed CURLALTSVC_ALTUSED again (feature is still EXPERIMENTAL thus
this is deemed ok).
You can disable sending this header just like you disable any other HTTP
header in libcurl.
Closes #4199
- CURLOPT_HTTP_VERSION: seting this to 3 forces HTTP/3 use directly
Even though it cannot fall-back to a lower HTTP version automatically. The
safer way to upgrade remains via CURLOPT_ALTSVC.
CURLOPT_H3 no longer has any bits that do anything and might be removed
before we remove the experimental label.
Updated the curl tool accordingly to use "--http3".
Closes #4197
- docs/ALTSVC: remove what works and the experimental explanation
Also, put the TODO items at the bottom.
Closes #4198
- docs/EXPERIMENTAL: explain what it means and what's experimental now
- curl: make use of CURLINFO_RETRY_AFTER when retrying
If a Retry-After: header was used in the response, that value overrides
other retry timing options.
Fixes #3794
Closes #4195
- curl: use CURLINFO_PROTOCOL to check for HTTP(s)
... instead of CURLINFO_EFFECTIVE_URL to avoid string operations.
- CURLINFO_RETRY_AFTER: parse the Retry-After header value
This is only the libcurl part that provides the information. There's no
user of the parsed value. This change includes three new tests for the
parser.
Ref: #3794
- docs/ALTSVC.md: first basic file format description
- curl: have -w's 'http_version' show '3' for HTTP/3
Closes #4196
- curl.h: add CURL_HTTP_VERSION_3 to the version enum
It can't be set for CURLOPT_HTTP_VERSION, but it can be extracted with
CURLINFO_HTTP_VERSION.
- quiche: make use of the connection timeout API properly
- quiche: make POSTFIELDS posts work
- quiche: improved error handling and memory cleanups
- quiche: flush egress in h3_stream_recv() too
- RELEASE-NOTES: synced
Jay Satiro (6 Aug 2019)
- [Patrick Monnerat brought this change]
os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid().
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
- tests: Fix the line endings for the SASL alt-auth tests
- Change data and protocol sections to CRLF line endings.
Prior to this change the tests would fail or hang, which is because
certain sections such as protocol require CRLF line endings.
Follow-up to grandparent commit which added the tests.
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
- [Steve Holme brought this change]
examples: Added SASL PLAIN authorisation identity (authzid) examples
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
- [Steve Holme brought this change]
curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool
Ref: https://github.com/curl/curl/issues/3653
Ref: https://github.com/curl/curl/pull/3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
- [Steve Holme brought this change]
sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixes #3653
Closes #3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
Daniel Stenberg (6 Aug 2019)
- docs/HTTP3: refreshed as it is now in master and HTTP/3 can be tested
- [Yiming Jing brought this change]
mesalink: implement client authentication
Closes #4184
- curl_multi_poll: a sister to curl_multi_wait() that waits more
Repeatedly we see problems where using curl_multi_wait() is difficult or
just awkward because if it has no file descriptor to wait for
internally, it returns immediately and leaves it to the caller to wait
for a small amount of time in order to avoid occasional busy-looping.
This is often missed or misunderstood, leading to underperforming
applications.
This change introduces curl_multi_poll() as a replacement drop-in
function that accepts the exact same set of arguments. This function
works identically to curl_multi_wait() - EXCEPT - for the case when
there's nothing to wait for internally, as then this function will by
itself wait for a "suitable" short time before it returns. This
effectiely avoids all risks of busy-looping and should also make it less
likely that apps "over-wait".
This also changes the curl tool to use this funtion internally when
doing parallel transfers and changes curl_easy_perform() to use it
internally.
Closes #4163
- quiche:h3_stream_recv return 0 at end of stream
... and remove some verbose messages we don't need. Made transfers from
facebook.com work better.
- altsvc: make quiche use h3-22 now
- quiche: show the actual version number
- quiche: first working HTTP/3 request
- enable debug log
- fix use of quiche API
- use download buffer
- separate header/body
Closes #4193
- http09: disable HTTP/0.9 by default in both tool and library
As the plan has been laid out in DEPRECATED. Update docs accordingly and
verify in test 1174. Now requires the option to be set to allow HTTP/0.9
responses.
Closes #4191
- quiche: initial h3 request send/receive
- lib/Makefile.am: make checksrc run in vquic too
- altsvc: fix removal of expired cache entry
Closes #4192
- RELEASE-NOTES: synced
Steve Holme (4 Aug 2019)
- md4: Use our own MD4 implementation when no crypto libraries are available
Closes #3780
- md4: No need to include Curl_md4.h for each TLS library
- md4: No need for the NTLM code to call Curl_md4it() for each TLS library
As the NTLM code no longer calls any of TLS libraries' specific MD4
functions, there is no need to call this function for each #ifdef.
- md4: Move the mbed TLS MD4 implementation out of the NTLM code
- md4: Move the WinCrypt implementation out of the NTLM code
- md4: Move the SecureTransport implementation out of the NTLM code
- md4: Use the Curl_md4it() function for OpenSSL based NTLM
- md4: Move the GNU TLS gcrypt MD4 implementation out of the NTLM code
- md4: Move the GNU TLS Nettle MD4 implementation out of the NTLM code
Jay Satiro (4 Aug 2019)
- OS400: Add CURLOPT_H3 symbols
Follow-up to 3af0e76 which added experimental H3 support.
Closes https://github.com/curl/curl/pull/4185
Daniel Stenberg (3 Aug 2019)
- url: make use of new HTTP version if alt-svc has one
- url: set conn->transport to default TCP at init time
- altsvc: with quiche, use the quiche h3 alpn string
Closes #4183
- alt-svc: more liberal ALPN name parsing
Allow pretty much anything to be part of the ALPN identifier. In
particular minus, which is used for "h3-20" (in-progress HTTP/3
versions) etc.
Updated test 356.
Closes #4182
- quiche: use the proper HTTP/3 ALPN
- quiche: add failf() calls for two error cases
To aid debugging
Closes #4181
- mailmap: added Kyohei Kadota
Kamil Dudka (1 Aug 2019)
- http_negotiate: improve handling of gss_init_sec_context() failures
If HTTPAUTH_GSSNEGOTIATE was used for a POST request and
gss_init_sec_context() failed, the POST request was sent
with empty body. This commit also restores the original
behavior of `curl --fail --negotiate`, which was changed
by commit 6c6035532383e300c712e4c1cd9fdd749ed5cf59.
Add regression tests 2077 and 2078 to cover this.
Fixes #3992
Closes #4171
Daniel Stenberg (1 Aug 2019)
- mailmap: added 4 more names
Evgeny Grin, Peter Pih, Anton Malov and Marquis de Muesli
- mailmap: add Giorgos Oikonomou
- src/makefile: fix uncompressed hugehelp.c generation
Regression from 5cf5d57ab9 (7.64.1)
Fixed-by: Lance Ware
Fixes #4176
Closes #4177
- appveyor: pass on -k to make
- timediff: make it 64 bit (if possible) even with 32 bit time_t
... to make it hold microseconds too.
Fixes #4165
Closes #4168
- ROADMAP: parallel transfers are merged now
- getenv: support up to 4K environment variable contents on windows
Reported-by: Michal Čaplygin
Fixes #4174
Closes #4175
- [Kyohei Kadota brought this change]
plan9: add support for running on Plan 9
Closes #3701
- [Kyohei Kadota brought this change]
ntlm: explicit type casting
- [Justin brought this change]
curl.h: fix outdated comment
Closes #4167
- curl: remove outdated comment
Turned bad with commit b8894085000
Reported-by: niallor on github
Fixes #4172
Closes #4173
- cleanup: remove the 'numsocks' argument used in many places
It was used (intended) to pass in the size of the 'socks' array that is
also passed to these functions, but was rarely actually checked/used and
the array is defined to a fixed size of MAX_SOCKSPEREASYHANDLE entries
that should be used instead.
Closes #4169
- readwrite_data: repair setting the TIMER_STARTTRANSFER stamp
Regression, broken in commit 65eb65fde64bd5f (curl 7.64.1)
Reported-by: Jonathan Cardoso Machado
Assisted-by: Jay Satiro
Fixes #4136
Closes #4162
- mailmap: Amit Katyal
- asyn-thread: removed unused variable
Follow-up to eb9a604f. Mistake caused by me when I edited the commit
before push...
- RELEASE-NOTES: synced
- [Amit Katyal brought this change]
asyn-thread: create a socketpair to wait on
Closes #4157
- curl: cap the maximum allowed values for retry time arguments
... to avoid integer overflows later when multiplying with 1000 to
convert seconds to milliseconds.
Added test 1269 to verify.
Reported-by: Jason Lee
Closes #4166
- progress: reset download/uploaded counter
... to make CURLOPT_MAX_RECV_SPEED_LARGE and
CURLOPT_MAX_SEND_SPEED_LARGE work correctly on subsequent transfers that
reuse the same handle.
Fixed-by: Ironbars13 on github
Fixes #4084
Closes #4161
- http2_recv: trigger another read when the last data is returned
... so that end-of-stream is detected properly.
Reported-by: Tom van der Woerdt
Fixes #4043
Closes #4160
- curl: avoid uncessary libcurl timeouts (in parallel mode)
When curl_multi_wait() returns OK without file descriptors to wait for,
it might already have done a long timeout.
Closes #4159
- [Balazs Kovacsics brought this change]
HTTP: use chunked Transfer-Encoding for HTTP_POST if size unknown
If using the read callback for HTTP_POST, and POSTFIELDSIZE is not set,
automatically add a Transfer-Encoding: chunked header, same as it is
already done for HTTP_PUT, HTTP_POST_FORM and HTTP_POST_MIME. Update
test 1514 according to the new behaviour.
Closes #4138
Jay Satiro (29 Jul 2019)
- [Daniel Stenberg brought this change]
winbuild: add vquic to list of build directories
This fixes the winbuild build method which broke several days ago
when experimental quic support was added in 3af0e76.
Reported-by: Michael Lee
Fixes https://github.com/curl/curl/issues/4158
- easy: resize receive buffer on easy handle reset
- In curl_easy_reset attempt to resize the receive buffer to its default
size. If realloc fails then continue using the previous size.
Prior to this change curl_easy_reset did not properly handle resetting
the receive buffer (data->state.buffer). It reset the variable holding
its size (data->set.buffer_size) to the default size (READBUFFER_SIZE)
but then did not actually resize the buffer. If a user resized the
buffer by using CURLOPT_BUFFERSIZE to set the size smaller than the
default, later called curl_easy_reset and attempted to reuse the handle
then a heap overflow would very likely occur during that handle's next
transfer.
Reported-by: Felix Hädicke
Fixes https://github.com/curl/curl/issues/4143
Closes https://github.com/curl/curl/pull/4145
- [Brad Spencer brought this change]
examples: Avoid reserved names in hiperfifo examples
- Trade in __attribute__((unused)) for the classic (void)x to silence
unused symbols.
Because the classic way is not gcc specific. Also because the prior
method mapped to symbol _Unused, which starts with _ and a capital
letter which is reserved.
Assisted-by: The Infinnovation team
Bug: https://github.com/curl/curl/issues/4120#issuecomment-512542108
Closes https://github.com/curl/curl/pull/4153
Daniel Stenberg (25 Jul 2019)
- RELEASE-NOTES: synced
- [Felix Hädicke brought this change]
ssh-libssh: do not specify O_APPEND when not in append mode
Specifying O_APPEND in conjunction with O_TRUNC and O_CREAT does not
make much sense. And this combination of flags is not accepted by all
SFTP servers (at least not Apache SSHD).
Fixes #4147
Closes #4148
- [Gergely Nagy brought this change]
multi: call detach_connection before Curl_disconnect
Curl_disconnect bails out if conn->easyq is not empty, detach_connection
needs to be called first to remove the current easy from the queue.
Fixes #4144
Closes #4151
Jay Satiro (23 Jul 2019)
- tool_operate: fix implicit call to easysrc_cleanup
easysrc_cleanup is only defined when CURL_DISABLE_LIBCURL_OPTION is not
defined, and prior to this change would be called regardless.
Bug: https://github.com/curl/curl/pull/3804#issuecomment-513922637
Reported-by: Marcel Raad
Closes https://github.com/curl/curl/pull/4142
Daniel Stenberg (22 Jul 2019)
- curl:create_transfers check return code from curl_easy_setopt
From commit b8894085
Pointed out by Coverity CID 1451703
Closes #4134
- HTTP3: initial (experimental) support
USe configure --with-ngtcp2 or --with-quiche
Using either option will enable a HTTP3 build.
Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me>
Closes #3500
- curl: remove dead code
The loop never loops (since b889408500), pointed out by Coverity (CID
1451702)
Closes #4133
- docs/PARALLEL-TRANSFERS: correct the version number
- docs/PARALLEL-TRANSFERS: added
- curl: support parallel transfers
This is done by making sure each individual transfer is first added to a
linked list as then they can be performed serially, or at will, in
parallel.
Closes #3804
- docs/MANUAL.md: converted to markdown from plain text
... will make it render as a nicer web page.
Closes #4131
- curl_version_info: provide nghttp2 details
Introducing CURLVERSION_SIXTH with nghttp2 info.
Closes #4121
- bump: start working on 7.66.0
- source: remove names from source comments
Several reasons:
- we can't add everyone who's helping out so its unfair to just a few
selected ones.
- we already list all helpers in THANKS and in RELEASE-NOTES for each
release
- we don't want to give the impression that some parts of the code is
"owned" or "controlled" by specific persons
Assisted-by: Daniel Gustafsson
Closes #4129
Version 7.65.3 (19 Jul 2019)
Daniel Stenberg (19 Jul 2019)
- RELEASE-NOTES: 7.65.3
- THANKS: 7.65.3 status
- progress: make the progress meter appear again
Fix regression caused by 21080e1
Reported-by: Chih-Hsuan Yen
Fixes #4122
Closes #4124
- version: bump to 7.65.3
- RELEASE-NOTES: Contributors or now 1990
Version 7.65.2 (17 Jul 2019)
Daniel Stenberg (17 Jul 2019)
- RELEASE-NOTES: 7.65.2
- THANKS: add contributors from 7.65.2
Jay Satiro (17 Jul 2019)
- [aasivov brought this change]
cmake: Fix finding Brotli on case-sensitive file systems
- Find package "Brotli" instead of "BROTLI" since the former is the
casing used for CMake/FindBrotli.cmake, and otherwise find_package
may fail on a case-sensitive file system.
Fixes https://github.com/curl/curl/issues/4117
- CURLOPT_RANGE.3: Caution against using it for HTTP PUT
AFAICT CURLOPT_RANGE does not support ranged HTTP PUT uploads so I've
cautioned against using it for that purpose and included a workaround.
Bug: https://curl.haxx.se/mail/lib-2019-04/0075.html
Reported-by: Christopher Head
Closes https://github.com/curl/curl/issues/3814
- [Stefano Simonelli brought this change]
CURLOPT_SEEKDATA.3: fix variable name
Closes https://github.com/curl/curl/pull/4118
- [Giorgos Oikonomou brought this change]
CIPHERS.md: Explain Schannel error SEC_E_ALGORITHM_MISMATCH
If the SSL backend is Schannel and the user specifies an Schannel CALG_
that is not supported by the protocol or the server then curl returns
CURLE_SSL_CONNECT_ERROR (35) SEC_E_ALGORITHM_MISMATCH.
Fixes https://github.com/curl/curl/issues/3389
Closes https://github.com/curl/curl/pull/4106
- [Daniel Gustafsson brought this change]
nss: inspect returnvalue of token check
PK11_IsPresent() checks for the token for the given slot is available,
and sets needlogin flags for the PK11_Authenticate() call. Should it
return false, we should however treat it as an error and bail out.
Closes https://github.com/curl/curl/pull/4110
- docs: Explain behavior change in --tlsv1. options since 7.54
Since 7.54 --tlsv1. options use the specified version or later, however
older versions of curl documented it as using just the specified version
which may or may not have happened depending on the TLS library.
Document this discrepancy to allay confusion for users familiar with the
old documentation that expect just the specified version.
Fixes https://github.com/curl/curl/issues/4097
Closes https://github.com/curl/curl/pull/4119
- libcurl: Restrict redirect schemes (follow-up)
- Allow FTPS on redirect.
- Update default allowed redirect protocols in documentation.
Follow-up to 6080ea0.
Ref: https://github.com/curl/curl/pull/4094
Closes https://github.com/curl/curl/pull/4115
Daniel Stenberg (16 Jul 2019)
- test1173: make it also check all libcurl option man pages
... and adjust those that cause errors
Closes #4116
- curl: only accept COLUMNS less than 10000
... as larger values would rather indicate something silly (and could
potentially cause buffer problems).
Reported-by: pendrek at hackerone
Closes #4114
- dist: add manpage-syntax.pl
follow-up to 7fb66c403
- test1173: detect some basic man page format mistakes
Triggered by PR #4111
Closes #4113
Jay Satiro (15 Jul 2019)
- [Bjarni Ingi Gislason brought this change]
docs: Fix missing lines caused by undefined macros
- Escape apostrophes at line start.
Some lines begin with a "'" (apostrophe, single quote), which is then
interpreted as a control character in *roff.
Such lines are interpreted as being a call to a macro, and if
undefined, the lines are removed from the output.
Bug: https://bugs.debian.org/926352
Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is>
Submitted-by: Alessandro Ghedini
Closes https://github.com/curl/curl/pull/4111
Daniel Stenberg (14 Jul 2019)
- libcurl-security.3: update to new CURLOPT_REDIR_PROTOCOLS defaults
follow-up to 6080ea098
- [Linos Giannopoulos brought this change]
libcurl: Add testcase for gopher redirects
The testcase ensures that redirects to CURLPROTO_GOPHER won't be
allowed, by default, in the future. Also, curl is being used
for convenience while keeping the testcases DRY.
The expected error code is CURLE_UNSUPPORTED_PROTOCOL when the client is
redirected to CURLPROTO_GOPHER
Signed-off-by: Linos Giannopoulos <lgian@skroutz.gr>
- [Linos Giannopoulos brought this change]
libcurl: Restrict redirect schemes
All protocols except for CURLPROTO_FILE/CURLPROTO_SMB and their TLS
counterpart were allowed for redirect. This vastly broadens the
exploitation surface in case of a vulnerability such as SSRF [1], where
libcurl-based clients are forced to make requests to arbitrary hosts.
For instance, CURLPROTO_GOPHER can be used to smuggle any TCP-based
protocol by URL-encoding a payload in the URI. Gopher will open a TCP
connection and send the payload.
Only HTTP/HTTPS and FTP are allowed. All other protocols have to be
explicitly enabled for redirects through CURLOPT_REDIR_PROTOCOLS.
[1]: https://www.acunetix.com/blog/articles/server-side-request-forgery-vulnerability/
Signed-off-by: Linos Giannopoulos <lgian@skroutz.gr>
Closes #4094
- [Zenju brought this change]
openssl: define HAVE_SSL_GET_SHUTDOWN based on version number
Closes #4100
- [Peter Simonyi brought this change]
http: allow overriding timecond with custom header
With CURLOPT_TIMECONDITION set, a header is automatically added (e.g.
If-Modified-Since). Allow this to be replaced or suppressed with
CURLOPT_HTTPHEADER.
Fixes #4103
Closes #4109
Jay Satiro (11 Jul 2019)
- [Juergen Hoetzel brought this change]
smb: Use the correct error code for access denied on file open
- Return CURLE_REMOTE_ACCESS_DENIED for SMB access denied on file open.
Prior to this change CURLE_REMOTE_FILE_NOT_FOUND was returned instead.
Closes https://github.com/curl/curl/pull/4095
- [Daniel Gustafsson brought this change]
DEPRECATE: fixup versions and spelling
Correctly set the July 17 version to 7.65.2, and update spelling to
be consistent. Also fix a typo.
Closes https://github.com/curl/curl/pull/4107
- [Gisle Vanem brought this change]
system_win32: fix clang warning
- Declare variable in header as extern.
Bug: https://github.com/curl/curl/commit/48b9ea4#commitcomment-34084597
Daniel Gustafsson (10 Jul 2019)
- headers: Remove no longer exported functions
There were a leftover few prototypes of Curl_ functions that we used to
export but no longer do, this removes those prototypes and cleans up any
comments still referring to them.
Curl_write32_le(), Curl_strcpy_url(), Curl_strlen_url(), Curl_up_free()
Curl_concat_url(), Curl_detach_connnection(), Curl_http_setup_conn()
were made static in 05b100aee247bb9bec8e9a1b0166496aa4248d1c.
Curl_http_perhapsrewind() made static in 574aecee208f79d391f10d57520b3.
For the remainder, I didn't trawl the Git logs hard enough to capture
their exact time of deletion, but they were all gone: Curl_splayprint(),
Curl_http2_send_request(), Curl_global_host_cache_dtor(),
Curl_scan_cache_used(), Curl_hostcache_destroy(), Curl_second_connect(),
Curl_http_auth_stage() and Curl_close_connections().
Closes #4096
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- CMake: fix typos and spelling
- [Kyle Edwards brought this change]
CMake: Convert errant elseif() to else()
CMake interprets an elseif() with no arguments as elseif(FALSE),
resulting in the elseif() block not being executed. That is not what
was intended here. Change the empty elseif() to an else() as it was
intended.
Closes #4101
Reported-by: Artalus <artalus-mail@yandex.ru>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
- buildconf: fix header filename
The header file inclusion had a typo, it should be .h and not .hd.
Fix by renaming.
Fixes #4102
Reported-by: AceCrow on Github
- [Jan Chren brought this change]
configure: fix --disable-code-coverage
This fixes the case when --disable-code-coverage supplied to ./configure
would result in coverage="yes" being set.
Closes #4099
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
- cleanup: fix typo in comment
- RELEASE-NOTES: synced
Jay Satiro (6 Jul 2019)
- [Daniel Gustafsson brought this change]
nss: support using libnss on macOS
The file suffix for dynamically loadable objects on macOS is .dylib,
which need to be added for the module definitions in order to get the
NSS TLS backend to work properly on macOS.
Closes https://github.com/curl/curl/pull/4046
- [Daniel Gustafsson brought this change]
nss: don't set unused parameter
The value of the maxPTDs parameter to PR_Init() has since at least
NSPR 2.1, which was released sometime in 1998, been marked ignored
as is accordingly not used in the initialization code. Setting it
to a value when calling PR_Init() is thus benign, but indicates an
intent which may be misleading. Reset the value to zero to improve
clarity.
Closes https://github.com/curl/curl/pull/4054
- [Daniel Gustafsson brought this change]
nss: only cache valid CRL entries
Change the logic around such that we only keep CRLs that NSS actually
ended up caching around for later deletion. If CERT_CacheCRL() fails
then there is little point in delaying the freeing of the CRL as it
is not used.
Closes https://github.com/curl/curl/pull/4053
- [Gergely Nagy brought this change]
lib: Use UTF-8 encoding in comments
Some editors and IDEs assume that source files use UTF-8 file encodings.
It also fixes the build with MSVC when /utf-8 command line option is
used (this option is mandatory for some other open-source projects, this
is useful when using the same options is desired for building all
libraries of a project).
Closes https://github.com/curl/curl/pull/4087
- [Caleb Raitto brought this change]
CURLOPT_HEADEROPT.3: Fix example
Fix an issue where example builds a curl_slist, but fails to actually
use it, or free it.
Closes https://github.com/curl/curl/pull/4090
- [Shankar Jadhavar brought this change]
winbuild: Change Makefile to honor ENABLE_OPENSSL_AUTO_LOAD_CONFIG
- Made changes so that ENABLE_OPENSSL_AUTO_LOAD_CONFIG will be honored.
- Also removed some ^M chars from file.
Prior to this change while building on Windows platform even if we pass
the ENABLE_OPENSSL_AUTO_LOAD_CONFIG option with value as "no" it does
not set the CURL_DISABLE_OPENSSL_AUTO_LOAD_CONFIG flag.
Closes https://github.com/curl/curl/pull/4086
Daniel Stenberg (4 Jul 2019)
- doh-url.d: added in 7.62.0
Jay Satiro (30 Jun 2019)
- docs: Fix links to OpenSSL docs
OpenSSL changed their manual locations and does not redirect to the new
locations.
Bug: https://curl.haxx.se/mail/lib-2019-06/0056.html
Reported-by: Daniel Stenberg
Daniel Stenberg (26 Jun 2019)
- [Gaël PORTAY brought this change]
curl_multi_wait.3: escape backslash in example
The backslash in the character Line Feed must be escaped.
The current man-page outputs the code as following:
fprintf(stderr, "curl_multi failed, code %d.0, mc);
The commit fixes it as follow:
fprintf(stderr, "curl_multi failed, code %d\n", mc);
Closes #4079
- openssl: disable engine if OPENSSL_NO_UI_CONSOLE is defined
... since that needs UI_OpenSSL() which isn't provided when OpenSSL is
built with OPENSSL_NO_UI_CONSOLE which happens when OpenSSL is built for
UWP (with "VC-WIN32-UWP").
Reported-by: Vasily Lobaskin
Fixes #4073
Closes #4077
- test1521: adapt to SLISTPOINT
The header now has the slist-using options marked as SLISTPOINT so this
makes sure test 1521 understands that.
Follow-up to ae99b4de1c443ae989
Closes #4074
- win32: make DLL loading a no-op for UWP
Reported-by: Michael Brehm
Fixes #4060
Closes #4072
- [1ocalhost brought this change]
configure: fix typo '--disable-http-uath'
Closes #4076
- [Niklas Hambüchen brought this change]
docs: fix string suggesting HTTP/2 is not the default
Commit 25fd1057c9c86e3 made HTTP2 the default, and further down in the
man page that new default is mentioned, but the section at the top
contradicted it until now.
Also remove claim that setting the HTTP version is not sensible.
Closes #4075
- RELEASE-NOTES: synced
- [Stephan Szabo brought this change]
tests: update fixed IP for hostip/clientip split
These tests give differences for me on linux when using a hostip
pointing to the external ip address for the local machine.
Closes #4070
Daniel Gustafsson (24 Jun 2019)
- http: clarify header buffer size calculation
The header buffer size calculation can from static analysis seem to
overlow as it performs an addition between two size_t variables and
stores the result in a size_t variable. Overflow is however guarded
against elsewhere since the input to the addition is regulated by
the maximum read buffer size. Clarify this with a comment since the
question was asked.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Daniel Stenberg (24 Jun 2019)
- KNOWN_BUGS: Don't clear digest for single realm
Closes #3267
- KNOWN_BUGS: Schannel disable CURLOPT_SSL_VERIFYPEER and verify hostname
Closes #3284
- http2: call done_sending on end of upload
To make sure a HTTP/2 stream registers the end of stream.
Bug #4043 made me find this problem but this fix doesn't correct the
reported issue.
Closes #4068
- [James Brown brought this change]
c-ares: honor port numbers in CURLOPT_DNS_SERVERS
By using ares_set_servers_ports_csv on new enough c-ares.
Fixes #4066
Closes #4067
Daniel Gustafsson (24 Jun 2019)
- CURLMOPT_SOCKETFUNCTION.3: fix typo
Daniel Stenberg (24 Jun 2019)
- [Koen Dergent brought this change]
curl: skip CURLOPT_PROXY_CAPATH for disabled-proxy builds
Closes #4061
- test153: fix content-length to avoid occasional hang
Closes #4065
- RELEASE-NOTES: synced
- multi: enable multiplexing by default (again)
It was originally made default in d7c4213bd0c (7.62.0) but mistakenly
reverted in commit 2f44e94efb3d (7.65.0). Now enabled again.
Closes #4051
- typecheck: add 3 missing strings and a callback data pointer
Closes #4050
- tests: add disable-scan.pl to dist
follow-up from 29177f422a5
Closes #4059
- http2: don't call stream-close on already closed streams
Closes #4055
Marcel Raad (20 Jun 2019)
- travis: enable alt-svc for coverage build
Closes
- travis: enable libssh2 for coverage build
It was enabled by default before commit c92d2e14cfb.
Disable torture tests 600 and 601 because of
https://github.com/curl/curl/issues/1678.
Closes
- travis: disable threaded resolver for coverage build
This enables more tests.
Closes
- travis: enable brotli for all xenial jobs
There's no need for a separate job, and no need to build it from source
with Xenial.
Closes
- travis: enable warnings-as-errors for coverage build
Closes
GitHub (20 Jun 2019)
- [Gisle Vanem brought this change]
system_win32: fix typo
Daniel Stenberg (20 Jun 2019)
- typecheck: CURLOPT_CONNECT_TO takes an slist too
Additionally, add an alias in curl.h for slist-using options so that
we can grep/parse those out at will.
Closes #4042
- [Stephan Szabo brought this change]
tests: support non-localhost HOSTIP for dict/smb servers
smbserver.py/dictserver.py were explicitly using localhost/127.0.0.1 for
binding the server which when we were running the tests with a separate
HOSTIP and CLIENTIP had failures verifying the server from the device we
were testing.
This changes them to take the address from runtests.py and default to
localhost/127.0.0.1 if none is given.
Closes #4048
- test1523: basic test of CURLOPT_LOW_SPEED_LIMIT
- configure: --disable-progress-meter
Builds libcurl without support for the built-in progress meter.
Closes #4023
- curl: improved skip-setopt-options when built with disabled features
Reduces #ifdefs in src/tool_operate.c
Follow-up from 4e86f2fc4e6
Closes #3936
Steve Holme (18 Jun 2019)
- netrc: Return the correct error code when out of memory
Introduced in 763c5178.
Closes #4036
Daniel Stenberg (18 Jun 2019)
- config-os400: add getpeername and getsockname defines
Reported-by: jonrumsey on github
Fixes #4037
Closes #4039
- runtests: keep logfiles around by default
Make '-k' a no-op. The singletest function now clears the log directory
BEFORE each individual test and not after, which makes it possible to
always keep the logfiles around after a test has been run. No need to
specify -k anymore. Keeping the option parsing around to work with users
of old habits.
Some tests also didn't work properly when -k was used (since the old
logs would be kep when a new test starts) which this change also fixes.
Closes #4035
- [Gergely Nagy brought this change]
openssl: fix pubkey/signature algorithm detection in certinfo
Certinfo gives the same result for all OpenSSL versions.
Also made printing RSA pubkeys consistent with older versions.
Reported-by: Michael Wallner
Fixes #3706
Closes #4030
- conn_maxage: move the check to prune_dead_connections()
... and avoid the locking issue.
Reported-by: Kunal Ekawde
Fixes #4029
Closes #4032
- tests: have runtests figure out disabled features
... so that runtests can skip individual test cases that test features
that are explicitly disabled in this build. This new logic is intended
for disabled features that aren't otherwise easily visible through the
curl_version_info() or other API calls.
tests/server/disabled is a newly built executable that will output a
list of disabled features. Outputs nothing for a default build.
Closes #3950
- test188/189: fix Content-Length
This cures the flaky test results
Closes #4034
- [Thomas Gamper brought this change]
winbuild: use WITH_PREFIX if given
Closes #4031
Daniel Gustafsson (17 Jun 2019)
- openssl: remove outdated comment
OpenSSL used to call exit(1) on syntax errors in OPENSSL_config(),
which is why we switched to CONF_modules_load_file() and introduced
a comment stating why. This behavior was however changed in OpenSSL
commit abdd677125f3a9e3082f8c5692203590fdb9b860, so remove the now
outdated and incorrect comment. The mentioned commit also declares
OPENSSL_config() deprecated so keep the current coding.
Closes #4033
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Daniel Stenberg (16 Jun 2019)
- RELEASE-NOTES: synced
Patrick Monnerat (16 Jun 2019)
- os400: make vsetopt() non-static as Curl_vsetopt() for os400 support.
Use it in curl_easy_setopt_ccsid().
Reported-by: jonrumsey on github
Fixes #3833
Closes #4028
Daniel Stenberg (15 Jun 2019)
- runtests: report single test time + total duration
... after each successful test.
Closes #4027
- multi: fix the transfer hash function
Follow-up from 8b987cc7eb
Reported-by: Tom van der Woerdt
Fixes #4018
Closes #4024
- unit1654: cleanup on memory failure
... to make it handle torture tests properly.
Reported-by: Marcel Raad
Fixes #4021
Closes #4022
Marcel Raad (13 Jun 2019)
- krb5: fix compiler warning
Even though the variable was used in a DEBUGASSERT, GCC 8 warned in
debug mode:
krb5.c:324:17: error: unused variable 'maj' [-Werror=unused-variable]
Just suppress the warning and declare the variable unconditionally
instead of only for DEBUGBUILD (which also missed the check for
HAVE_ASSERT_H).
Closes https://github.com/curl/curl/pull/4020
Daniel Stenberg (13 Jun 2019)
- quote.d: asterisk prefix works for SFTP as well
Reported-by: Ben Voris
Fixes #4017
Closes #4019
- multi: fix the transfer hashes in the socket hash entries
- The transfer hashes weren't using the correct keys so removing entries
failed.
- Simplified the iteration logic over transfers sharing the same socket and
they now simply are set to expire and thus get handled in the "regular"
timer loop instead.
Reported-by: Tom van der Woerdt
Fixes #4012
Closes #4014
Jay Satiro (12 Jun 2019)
- [Cliff Crosland brought this change]
url: Fix CURLOPT_MAXAGE_CONN time comparison
Old connections are meant to expire from the connection cache after
CURLOPT_MAXAGE_CONN seconds. However, they actually expire after 1000x
that value. This occurs because a time value measured in milliseconds is
accidentally divided by 1M instead of by 1,000.
Closes https://github.com/curl/curl/pull/4013
Daniel Stenberg (11 Jun 2019)
- test1165: verify that CURL_DISABLE_ symbols are in sync
between configure.ac and source code. They should be possible to switch
on/off in configure AND be used in source code.
- configure: remove CURL_DISABLE_TLS_SRP
It isn't used by code so stop providing the define.
Closes #4010
- Revert "cmake: add SMB to list of disabled protocols if HTTP_ONLY is specified"
This reverts commit 36738caeb78603ce24e3ea089a167b8c216fb938.
Apparently several of the appveyor windows builds broke.
- [sergey-raevskiy brought this change]
cmake: add SMB to list of disabled protocols if HTTP_ONLY is specified
Reviewed-by: Jakub Zakrzewski
Closes #3770
- RELEASE-NOTES: synced
- http2: remove CURL_DISABLE_TYPECHECK define
... in http2-less builds as it served no use.
- configure: more --disable switches to toggle off individual features
... actual support in the code for disabling these has already landed.
Closes #4009
- wolfssl: fix key pinning build error
follow-up from deb9462ff2de8
- CURLMOPT_SOCKETFUNCTION.3: clarified
Moved away the callback explanation from curl_multi_socket_action.3 and
expanded it somewhat.
Closes #4006
- wolfssl: fixup for SNI use
follow-up from deb9462ff2de8
Closes #4007
- CURLOPT_CAINFO.3: polished wording
Clarify the functionality when built to use Schannel and Secure
Transport and stop calling it the "recommended" or "preferred" way and
instead rather call it the default.
Removed the reference to the ssl comparison table as it isn't necessary.
Reported-by: Richard Alcock
Bug: https://curl.haxx.se/mail/lib-2019-06/0019.html
Closes #4005
GitHub (10 Jun 2019)
- [Daniel Stenberg brought this change]
SECURITY.md: created
Brief security policy description for use/display on github.
Daniel Gustafsson (10 Jun 2019)
- tool_cb_prg: Fix integer overflow in progress bar
Commit 61faa0b420c236480bc9ef6fd52b4ecc1e0f8d17 fixed the progress bar
width calculation to avoid integer overflow, but failed to account for
the fact that initial_size is initialized to -1 when the file size is
retrieved from the remote on an upload, causing another signed integer
overflow. Fix by separately checking for this case before the width
calculation.
Closes #3984
Reported-by: Brian Carpenter (Geeknik Labs)
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Daniel Stenberg (10 Jun 2019)
- wolfssl: refer to it as wolfSSL only
Remove support for, references to and use of "cyaSSL" from the source
and docs. wolfSSL is the current name and there's no point in keeping
references to ancient history.
Assisted-by: Daniel Gustafsson
Closes #3903
- RELEASE-NOTES: synced
- bindlocal: detect and avoid IP version mismatches in bind()
Reported-by: Alex Grebenschikov
Fixes #3993
Closes #4002
- multi: make sure 'data' can present in several sockhash entries
Since more than one socket can be used by each transfer at a given time,
each sockhash entry how has its own hash table with transfers using that
socket.
In addition, the sockhash entry can now be marked 'blocked = TRUE'"
which then makes the delete function just set 'removed = TRUE' instead
of removing it "for real", as a way to not rip out the carpet under the
feet of a parent function that iterates over the transfers of that same
sockhash entry.
Reported-by: Tom van der Woerdt
Fixes #3961
Fixes #3986
Fixes #3995
Fixes #4004
Closes #3997
- [Sorcus brought this change]
libcurl-tutorial.3: Fix small typo (mutipart -> multipart)
Fixed-by: MrSorcus on github
Closes #4000
- unpause: trigger a timeout for event-based transfers
... so that timeouts or other state machine actions get going again
after a changing pause state. For example, if the last delivery was
paused there's no pending socket activity.
Reported-by: sstruchtrup on github
Fixes #3994
Closes #4001
Marcel Raad (9 Jun 2019)
- travis: use xenial LLVM package for scan-build
I missed that in commit 99a49d6.
- travis: update scan-build job to xenial
Closes https://github.com/curl/curl/pull/3999
Daniel Stenberg (8 Jun 2019)
- bump: start working on 7.65.2
Marcel Raad (5 Jun 2019)
- examples/htmltitle: use C++ casts between pointer types
Compilers and static analyzers warn about using C-style casts here.
Closes https://github.com/curl/curl/pull/3975
- examples/fopen: fix comparison
As want is size_t, (file->buffer_pos - want) is unsigned, so checking
if it's less than zero makes no sense.
Check if file->buffer_pos is less than want instead to avoid the
unsigned integer wraparound.
Closes https://github.com/curl/curl/pull/3975
- build: fix Codacy warnings
Reduce variable scopes and remove redundant variable stores.
Closes https://github.com/curl/curl/pull/3975
- sws: remove unused variables
Unused since commit 2f44e94.
Closes https://github.com/curl/curl/pull/3975
Version 7.65.1 (4 Jun 2019)
Daniel Stenberg (4 Jun 2019)
- RELEASE-NOTES: 7.65.1
- THANKS: new contributors from 7.65.1
Steve Holme (4 Jun 2019)
- [Frank Gevaerts brought this change]
ssl: Update outdated "openssl-only" comments for supported backends
These are for features that used to be openssl-only but were expanded
over time to support other SSL backends.
Closes #3985
Daniel Stenberg (4 Jun 2019)
- curl_share_setopt.3: improve wording [ci ship]
Reported-by: Carlos ORyan
Steve Holme (4 Jun 2019)
- tool_parsecfg: Use correct return type for GetModuleFileName()
GetModuleFileName() returns a DWORD which is a typedef of an unsigned
long and not an int.
Closes #3980
Daniel Stenberg (3 Jun 2019)
- TODO: "at least N milliseconds between requests" [ci skip]
Suggested-by: dkwolfe4 on github
Closes #3920
Steve Holme (2 Jun 2019)
- tests/server/.gitignore: Add socksd to the ignore list
Missed in 04fd6755.
Closes #3978
- tool_parsecfg: Fix control flow issue (DEADCODE)
Follow-up to 8144ba38.
Detected by Coverity CID 1445663
Closes #3976
Daniel Stenberg (2 Jun 2019)
- [Sergey Ogryzkov brought this change]
NTLM: reset proxy "multipass" state when CONNECT request is done
Closes #3972
- test334: verify HTTP 204 response with chunked coding header
Verifies that a bodyless response don't parse this content-related
header.
- [Michael Kaufmann brought this change]
http: don't parse body-related headers bodyless responses
Responses with status codes 1xx, 204 or 304 don't have a response body. For
these, don't parse these headers:
- Content-Encoding
- Content-Length
- Content-Range
- Last-Modified
- Transfer-Encoding
This change ensures that HTTP/2 upgrades work even if a
"Content-Length: 0" or a "Transfer-Encoding: chunked" header is present.
Co-authored-by: Daniel Stenberg
Closes #3702
Fixes #3968
Closes #3977
- tls13-docs: mention it is only for OpenSSL >= 1.1.1
Reported-by: Jay Satiro
Co-authored-by: Jay Satiro
Fixes #3938
Closes #3946
- dump-header.d: spell out that no headers == empty file [ci skip]
Reported-by: wesinator at github
Fixes #3964
Closes #3974
- singlesocket: use separate variable for inner loop
An inner loop within the singlesocket() function wrongly re-used the
variable for the outer loop which then could cause an infinite
loop. Change to using a separate variable!
Reported-by: Eric Wu
Fixes #3970
Closes #3973
- RELEASE-NOTES: synced
- [Josie Huddleston brought this change]
http2: Stop drain from being permanently set on
Various functions called within Curl_http2_done() can have the
side-effect of setting the Easy connection into drain mode (by calling
drain_this()). However, the last time we unset this for a transfer (by
calling drained_transfer()) is at the beginning of Curl_http2_done().
If the Curl_easy is reused for another transfer, it is then stuck in
drain mode permanently, which in practice makes it unable to write any
data in the new transfer.
This fix moves the last call to drained_transfer() to later in
Curl_http2_done(), after the functions that could potentially call for a
drain.
Fixes #3966
Closes #3967
Reported-by: Josie-H
Steve Holme (29 May 2019)
- conncache: Remove the DEBUGASSERT on length check
We trust the calling code as this is an internal function.
Closes #3962
Jay Satiro (29 May 2019)
- [Gisle Vanem brought this change]
system_win32: fix function prototype
- Change if_nametoindex parameter type from char * to const char *.
Follow-up to 09eef8af from this morning.
Bug: https://github.com/curl/curl/commit/09eef8af#r33716067
Marcel Raad (29 May 2019)
- appveyor: add Visual Studio solution build
Closes https://github.com/curl/curl/pull/3941
- appveyor: add support for other build systems
Introduce BUILD_SYSTEM variable, which is currently always CMake.
Closes https://github.com/curl/curl/pull/3941
Steve Holme (29 May 2019)
- url: Load if_nametoindex() dynamically from iphlpapi.dll on Windows
This fixes the static dependency on iphlpapi.lib and allows curl to
build for targets prior to Windows Vista.
This partially reverts 170bd047.
Fixes #3960
Closes #3958
Daniel Stenberg (29 May 2019)
- http: fix "error: equality comparison with extraneous parentheses"
- parse_proxy: make sure portptr is initialized
Reported-by: Benbuck Nason
fixes #3959
- url: default conn->port to the same as conn->remote_port
... so that it has a sensible value when ConnectionExists() is called which
needs it set to differentiate host "bundles" correctly on port number!
Also, make conncache:hashkey() use correct port for bundles that are proxy vs
host connections.
Probably a regression from 7.62.0
Reported-by: Tom van der Woerdt
Fixes #3956
Closes #3957
- conncache: make "bundles" per host name when doing proxy tunnels
Only HTTP proxy use where multiple host names can be used over the same
connection should use the proxy host name for bundles.
Reported-by: Tom van der Woerdt
Fixes #3951
Closes #3955
- multi: track users of a socket better
They need to be removed from the socket hash linked list with more care.
When sh_delentry() is called to remove a sockethash entry, remove all
individual transfers from the list first. To enable this, each Curl_easy struct
now stores a pointer to the sockethash entry to know how to remove itself.
Reported-by: Tom van der Woerdt and Kunal Ekawde
Fixes #3952
Fixes #3904
Closes #3953
Steve Holme (28 May 2019)
- curl-win32.h: Enable Unix Domain Sockets based on the Windows SDK version
Microsoft added support for Unix Domain Sockets in Windows 10 1803
(RS4). Rather than expect the user to enable Unix Domain Sockets by
uncommenting the #define that was added in 0fd6221f we use the RS4
pre-processor variable that is present in newer versions of the
Windows SDK.
Closes #3939
Daniel Stenberg (28 May 2019)
- [Jonas Vautherin brought this change]
cmake: support CMAKE_OSX_ARCHITECTURES when detecting SIZEOF variables
Closes #3945
Marcel Raad (27 May 2019)
- HAProxy tests: add keywords
Add the proxy and haproxy keywords in order to be able to exclude or
run these specific tests.
Closes https://github.com/curl/curl/pull/3949
Daniel Stenberg (27 May 2019)
- [Maksim Stsepanenka brought this change]
tests: make test 1420 and 1406 work with rtsp-disabled libcurl
Closes #3948
Kamil Dudka (27 May 2019)
- [Hubert Kario brought this change]
nss: allow to specify TLS 1.3 ciphers if supported by NSS
Closes #3916
Daniel Stenberg (26 May 2019)
- RELEASE-NOTES: synced
- [Jay Satiro brought this change]
Revert all SASL authzid (new feature) commits
- Revert all commits related to the SASL authzid feature since the next
release will be a patch release, 7.65.1.
Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined
for the next release, assuming it would be a feature release 7.66.0.
However instead the next release will be a patch release, 7.65.1 and
will not contain any new features.
After the patch release after the reverted commits can be restored by
using cherry-pick:
git cherry-pick a14d72c a9499ff 8c1cc36 c2a8d52 0edf690
Details for all reverted commits:
Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()."
This reverts commit 0edf6907ae37e2020722e6f61229d8ec64095b0a.
Revert "tests: Fix the line endings for the SASL alt-auth tests"
This reverts commit c2a8d52a1356a722ff9f4aeb983cd4eaf80ef221.
Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples"
This reverts commit 8c1cc369d0c7163c6dcc91fd38edfea1f509ae75.
Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool"
This reverts commit a9499ff136d89987af885e2d7dff0a066a3e5817.
Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID"
This reverts commit a14d72ca2fec5d4eb5a043936e4f7ce08015c177.
- [dbrowndan brought this change]
FAQ: more minor updates and spelling fixes
Closes #3937
- RELEASE-NOTES: synced
- sectransp: handle errSSLPeerAuthCompleted from SSLRead()
Reported-by: smuellerDD on github
Fixes #3932
Closes #3933
GitHub (24 May 2019)
- [Gisle Vanem brought this change]
Fix typo.
Daniel Stenberg (23 May 2019)
- tool_setopt: for builds with disabled-proxy, skip all proxy setopts()
Reported-by: Marcel Raad
Fixes #3926
Closes #3929
Steve Holme (23 May 2019)
- winbuild: Use two space indentation
Closes #3930
GitHub (23 May 2019)
- [Gisle Vanem brought this change]
tool_parse_cfg: Avoid 2 fopen() for WIN32
Using the memdebug.h mem-leak feature, I noticed 2 calls like:
FILE tool_parsecfg.c:70 fopen("c:\Users\Gisle\AppData\Roaming\_curlrc","rt")
FILE tool_parsecfg.c:114 fopen("c:\Users\Gisle\AppData\Roaming\_curlrc","rt")
No need for 'fopen(), 'fclose()' and a 'fopen()' yet again.
Daniel Stenberg (23 May 2019)
- md4: include the mbedtls config.h to get the MD4 info
- md4: build correctly with openssl without MD4
Reported-by: elsamuko at github
Fixes #3921
Closes #3922
Patrick Monnerat (23 May 2019)
- os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid().
Daniel Stenberg (23 May 2019)
- .github/FUNDING: mention our opencollective "home" [ci skip]
Marcel Raad (23 May 2019)
- [Zenju brought this change]
config-win32: add support for if_nametoindex and getsockname
Closes https://github.com/curl/curl/pull/3923
Jay Satiro (23 May 2019)
- tests: Fix the line endings for the SASL alt-auth tests
- Change data and protocol sections to CRLF line endings.
Prior to this change the tests would fail or hang, which is because
certain sections such as protocol require CRLF line endings.
Follow-up to a9499ff from today which added the tests.
Ref: https://github.com/curl/curl/pull/3790
Daniel Stenberg (23 May 2019)
- url: fix bad #ifdef
Regression since e91e48161235272ff485.
Reported-by: Tom Greenslade
Fixes #3924
Closes #3925
- Revert "progress: CURL_DISABLE_PROGRESS_METER"
This reverts commit 3b06e68b7734cb10a555f9d7e804dd5d808236a4.
Clearly this change wasn't good enough as it broke CURLOPT_LOW_SPEED_LIMIT +
CURLOPT_LOW_SPEED_TIME
Reported-by: Dave Reisner
Fixes #3927
Closes #3928
Steve Holme (22 May 2019)
- examples: Added SASL PLAIN authorisation identity (authzid) examples
- curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool
- sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixed #3653
Closes #3790
Marc Hoersken (22 May 2019)
- tests: add support to test against OpenSSH for Windows
Testing against OpenSSH for Windows requires v7.7.0.0 or newer
due to the use of AllowUsers and DenyUsers. For more info see:
https://github.com/PowerShell/Win32-OpenSSH/wiki/sshd_config
Daniel Stenberg (22 May 2019)
- bump: start on the next release
Marcel Raad (22 May 2019)
- examples: fix "clarify calculation precedence" warnings
Closes https://github.com/curl/curl/pull/3919
- hiperfifo: remove unused variable
Closes https://github.com/curl/curl/pull/3919
- examples: remove dead variable stores
Closes https://github.com/curl/curl/pull/3919
- examples: reduce variable scopes
Closes https://github.com/curl/curl/pull/3919
- http2-download: fix format specifier
Closes https://github.com/curl/curl/pull/3919
Daniel Stenberg (22 May 2019)
- PolarSSL: deprecate support step 1. Removed from configure.
Also removed mentions from most docs.
Discussed: https://curl.haxx.se/mail/lib-2019-05/0045.html
Closes #3888
- configure/cmake: check for if_nametoindex()
- adds the check to cmake
- fixes the configure check to work for cross-compiled windows builds
Closes #3917
- parse_proxy: use the IPv6 zone id if given
If the proxy string is given as an IPv6 numerical address with a zone
id, make sure to use that for the connect to the proxy.
Reported-by: Edmond Yu
Fixes #3482
Closes #3918
Version 7.65.0 (22 May 2019)
Daniel Stenberg (22 May 2019)
- RELEASE-NOTES: 7.65.0 release
- THANKS: from the 7.65.0 release-notes
- url: convert the zone id from a IPv6 URL to correct scope id
Reported-by: GitYuanQu on github
Fixes #3902
Closes #3914
- configure: detect getsockname and getpeername on windows too
Made detection macros for these two functions in the same style as other
functions possibly in winsock in the hope this will work better to
detect these functions when cross-compiling for Windows.
Follow-up to e91e4816123
Fixes #3913
Closes #3915
Marcel Raad (21 May 2019)
- examples: remove unused variables
Fixes Codacy/CppCheck warnings.
Closes
Daniel Gustafsson (21 May 2019)
- udpateconninfo: mark variable unused
When compiling without getpeername() or getsockname(), the sockfd
paramter to Curl_udpateconninfo() became unused after commit e91e481612
added ifdef guards.
Closes #3910
Fixes https://curl.haxx.se/dev/log.cgi?id=20190520172441-32196
Reviewed-by: Marcel Raad, Daniel Stenberg
- ftp: move ftp_ccc in under featureflag
Commit e91e48161235272ff485ff32bd048c53af731f43 moved ftp_ccc in under
the FTP featureflag in the UserDefined struct, but vtls callsites were
still using it unprotected.
Closes #3912
Fixes: https://curl.haxx.se/dev/log.cgi?id=20190520044705-29865
Reviewed-by: Daniel Stenberg, Marcel Raad
Daniel Stenberg (20 May 2019)
- curl: report error for "--no-" on non-boolean options
Reported-by: Olen Andoni
Fixes #3906
Closes #3907
- [Guy Poizat brought this change]
mbedtls: enable use of EC keys
Closes #3892
- lib1560: add tests for parsing URL with too long scheme
Ref: #3905
- [Omar Ramadan brought this change]
urlapi: increase supported scheme length to 40 bytes
The longest currently registered URI scheme at IANA is 36 bytes long.
Closes #3905
Closes #3900
Marcel Raad (20 May 2019)
- lib: reduce variable scopes
Fixes Codacy/CppCheck warnings.
Closes https://github.com/curl/curl/pull/3872
- tool_formparse: remove redundant assignment
Just initialize word_begin with the correct value.
Closes https://github.com/curl/curl/pull/3873
- ssh: move variable declaration to where it's used
This way, we need only one call to free.
Closes https://github.com/curl/curl/pull/3873
- ssh-libssh: remove unused variable
sock was only used to be assigned to fd_read.
Closes https://github.com/curl/curl/pull/3873
Daniel Stenberg (20 May 2019)
- test332: verify the blksize fix
- tftp: use the current blksize for recvfrom()
bug: https://curl.haxx.se/docs/CVE-2019-5436.html
Reported-by: l00p3r on hackerone
CVE-2019-5436
Daniel Gustafsson (19 May 2019)
- version: make ssl_version buffer match for multi_ssl
When running a multi TLS backend build the version string needs more
buffer space. Make the internal ssl_buffer stack buffer match the one
in Curl_multissl_version() to allow for the longer string. For single
TLS backend builds there is no use in extended to buffer. This is a
fallout from #3863 which fixes up the multi_ssl string generation to
avoid a buffer overflow when the buffer is too small.
Closes #3875
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Steve Holme (18 May 2019)
- http_ntlm_wb: Handle auth for only a single request
Currently when the server responds with 401 on NTLM authenticated
connection (re-used) we consider it to have failed. However this is
legitimate and may happen when for example IIS is set configured to
'authPersistSingleRequest' or when the request goes thru a proxy (with
'via' header).
Implemented by imploying an additional state once a connection is
re-used to indicate that if we receive 401 we need to restart
authentication.
Missed in fe6049f0.
- http_ntlm_wb: Cleanup handshake after clean NTLM failure
Missed in 50b87c4e.
- http_ntlm_wb: Return the correct error on receiving an empty auth message
Missed in fe20826b as it wasn't implemented in http.c in b4d6db83.
Closes #3894
Daniel Stenberg (18 May 2019)
- curl: make code work with protocol-disabled libcurl
Closes #3844
- libcurl: #ifdef away more code for disabled features/protocols
- progress: CURL_DISABLE_PROGRESS_METER
- hostip: CURL_DISABLE_SHUFFLE_DNS
- netrc: CURL_DISABLE_NETRC
Viktor Szakats (16 May 2019)
- docs: Markdown and misc improvements [ci skip]
Approved-by: Daniel Stenberg
Closes #3896
- docs/RELEASE-PROCEDURE: link to live iCalendar [ci skip]
Ref: https://github.com/curl/curl/commit/0af41b40b2c7bd379b2251cbe7cd618e21fa0ea1#commitcomment-33563135
Approved-by: Daniel Stenberg
Closes #3895
Daniel Stenberg (16 May 2019)
- travis: add an osx http-only build
Closes #3887
- cleanup: remove FIXME and TODO comments
They serve very little purpose and mostly just add noise. Most of them
have been around for a very long time. I read them all before removing
or rephrasing them.
Ref: #3876
Closes #3883
- curl: don't set FTP options for FTP-disabled builds
... since libcurl has started to be totally unaware of options for
disabled protocols they now return error.
Bug: https://github.com/curl/curl/commit/c9c5304dd4747cbe75d2f24be85920d572fcb5b8#commitcomment-33533937
Reported-by: Marcel Raad
Closes #3886
Steve Holme (16 May 2019)
- http_ntlm_wb: Move the type-2 message processing into a dedicated function
This brings the code inline with the other HTTP authentication mechanisms.
Closes #3890
Daniel Stenberg (15 May 2019)
- RELEASE-NOTES: synced
- docs/RELEASE-PROCEDURE: updated coming releases dates [ci skip]
- CURLOPT_READFUNCTION.3: see also CURLOPT_UPLOAD_BUFFERSIZE [ci skip]
Reported-by: Roy Bellingan
Bug: #3885
- parse_proxy: use the URL parser API
As we treat a given proxy as a URL we should use the unified URL parser
to extract the parts out of it.
Closes #3878
Steve Holme (15 May 2019)
- http_negotiate: Move the Negotiate state out of the negotiatedata structure
Given that this member variable is not used by the SASL based protocols
there is no need to have it here.
Closes #3882
- http_ntlm: Move the NTLM state out of the ntlmdata structure
Given that this member variable is not used by the SASL based protocols
there is no need to have it here.
- url: Move the negotiate state type into a dedicated enum
- url: Remove duplicate clean up of the winbind variables in conn_shutdown()
Given that Curl_disconnect() calls Curl_http_auth_cleanup_ntlm() prior
to calling conn_shutdown() and it in turn performs this, there is no
need to perform the same action in conn_shutdown().
Closes #3881
Daniel Stenberg (14 May 2019)
- urlapi: require a non-zero host name length when parsing URL
Updated test 1560 to verify.
Closes #3880
- configure: error out if OpenSSL wasn't detected when asked for
If --with-ssl is used and configure still couldn't enable SSL this
creates an error instead of just silently ignoring the fact.
Suggested-by: Isaiah Norton
Fixes #3824
Closes #3830
Daniel Gustafsson (14 May 2019)
- imap: Fix typo in comment
Steve Holme (14 May 2019)
- url: Remove unnecessary initialisation from allocate_conn()
No need to set variables to zero as calloc() does this for us.
Closes #3879
Daniel Stenberg (14 May 2019)
- CURLOPT_CAINFO.3: with Schannel, you want Windows 8 or later [ci skip]
Clues-provided-by: Jay Satiro
Clues-provided-by: Jeroen Ooms
Fixes #3711
Closes #3874
Daniel Gustafsson (13 May 2019)
- vtls: fix potential ssl_buffer stack overflow
In Curl_multissl_version() it was possible to overflow the passed in
buffer if the generated version string exceeded the size of the buffer.
Fix by inverting the logic, and also make sure to not exceed the local
buffer during the string generation.
Closes #3863
Reported-by: nevv on HackerOne/curl
Reviewed-by: Jay Satiro
Reviewed-by: Daniel Stenberg
Daniel Stenberg (13 May 2019)
- RELEASE-NOTES: synced
- appveyor: also build "/ci" branches like travis
- pingpong: disable more when no pingpong enabled
- proxy: acknowledge DISABLE_PROXY more
- parsedate: CURL_DISABLE_PARSEDATE
- sasl: only enable if there's a protocol enabled using it
- mime: acknowledge CURL_DISABLE_MIME
- wildcard: disable from build when FTP isn't present
- http: CURL_DISABLE_HTTP_AUTH
- base64: build conditionally if there are users
- doh: CURL_DISABLE_DOH
Steve Holme (12 May 2019)
- auth: Rename the various authentication clean up functions
For consistency and to a avoid confusion.
Closes #3869
Daniel Stenberg (12 May 2019)
- [Jay Satiro brought this change]
docs/INSTALL: fix broken link [ci skip]
Reported-by: Joombalaya on github
Fixes #3818
Marcel Raad (12 May 2019)
- easy: fix another "clarify calculation precedence" warning
I missed this one in commit 6b3dde7fe62ea5a557fd1fd323fac2bcd0c2e9be.
- build: fix "clarify calculation precedence" warnings
Codacy/CppCheck warns about this. Consistently use parentheses as we
already do in some places to silence the warning.
Closes https://github.com/curl/curl/pull/3866
- cmake: restore C89 compatibility of CurlTests.c
I broke it in d1b5cf830bfe169745721b21245d2217d2c2453e and
97de97daefc2ed084c91eff34af2426f2e55e134.
Reported-by: Viktor Szakats
Ref: https://github.com/curl/curl/commit/97de97daefc2ed084c91eff34af2426f2e55e134#commitcomment-33499044
Closes https://github.com/curl/curl/pull/3868
Steve Holme (11 May 2019)
- http_ntlm: Corrected the name of the include guard
Missed in f0bdd72c.
Closes #3867
- http_digest: Don't expose functions when HTTP and Crypto Auth are disabled
Closes #3861
- http_negotiate: Don't expose functions when HTTP is disabled
Daniel Stenberg (11 May 2019)
- SECURITY-PROCESS: fix links [ci skip]
Marcel Raad (11 May 2019)
- CMake: suppress unused variable warnings
I missed these in commit d1b5cf830bfe169745721b21245d2217d2c2453e.
Daniel Stenberg (11 May 2019)
- doh: disable DOH for the cases it doesn't work
Due to limitations in Curl_resolver_wait_resolv(), it doesn't work for
DOH resolves. This fix disables DOH for those.
Limitation added to KNOWN_BUGS.
Fixes #3850
Closes #3857
Jay Satiro (11 May 2019)
- checksrc.bat: Ignore snprintf warnings in docs/examples
.. because we allow snprintf use in docs/examples.
Closes https://github.com/curl/curl/pull/3862
Steve Holme (10 May 2019)
- vauth: Fix incorrect function description for Curl_auth_user_contains_domain()
...and misalignment of these comments. From a78c61a4.
Closes #3860
Jay Satiro (10 May 2019)
- Revert "multi: support verbose conncache closure handle"
This reverts commit b0972bc.
- No longer show verbose output for the conncache closure handle.
The offending commit was added so that the conncache closure handle
would inherit verbose mode from the user's easy handle. (Note there is
no way for the user to set options for the closure handle which is why
that was necessary.) Other debug settings such as the debug function
were not also inherited since we determined that could lead to crashes
if the user's per-handle private data was used on an unexpected handle.
The reporter here says he has a debug function to capture the verbose
output, and does not expect or want any output to stderr; however
because the conncache closure handle does not inherit the debug function
the verbose output for that handle does go to stderr.
There are other plausible scenarios as well such as the user redirects
stderr on their handle, which is also not inherited since it could lead
to crashes when used on an unexpected handle.
Short of allowing the user to set options for the conncache closure
handle I don't think there's much we can safely do except no longer
inherit the verbose setting.
Bug: https://curl.haxx.se/mail/lib-2019-05/0021.html
Reported-by: Kristoffer Gleditsch
Ref: https://github.com/curl/curl/pull/3598
Ref: https://github.com/curl/curl/pull/3618
Closes https://github.com/curl/curl/pull/3856
Steve Holme (10 May 2019)
- ntlm: Fix misaligned function comments for Curl_auth_ntlm_cleanup()
From 6012fa5a.
Closes #3858
Daniel Stenberg (9 May 2019)
- BUG-BOUNTY: minor formatting fixes [ci skip]
- RELEASE-NOTES: synced
- BUG-BOUNTY.md: add the Dropbox "bonus" extra payout ability [ci skip]
Closes #3839
Kamil Dudka (9 May 2019)
- http_negotiate: do not treat failure of gss_init_sec_context() as fatal
Fixes #3726
Closes #3849
- spnego_gssapi: fix return code on gss_init_sec_context() failure
Fixes #3726
Closes #3849
Steve Holme (9 May 2019)
- gen_resp_file.bat: Removed unnecessary @ from all but the first command
There is need to use @ on every command once echo has been turned off.
Closes #3854
Jay Satiro (8 May 2019)
- http: Ignore HTTP/2 prior knowledge setting for HTTP proxies
- Do not switch to HTTP/2 for an HTTP proxy that is not tunnelling to
the destination host.
We already do something similar for HTTPS proxies by not sending h2. [1]
Prior to this change setting CURL_HTTP_VERSION_2_PRIOR_KNOWLEDGE would
incorrectly use HTTP/2 to talk to the proxy, which is not something we
support (yet?). Also it's debatable whether or not that setting should
apply to HTTP/2 proxies.
[1]: https://github.com/curl/curl/commit/17c5d05
Bug: https://github.com/curl/curl/issues/3570
Bug: https://github.com/curl/curl/issues/3832
Closes https://github.com/curl/curl/pull/3853
Marcel Raad (8 May 2019)
- travis: update mesalink build to xenial
Closes https://github.com/curl/curl/pull/3842
Daniel Stenberg (8 May 2019)
- [Ricky Leverence brought this change]
OpenSSL: Report -fips in version if OpenSSL is built with FIPS
Older versions of OpenSSL report FIPS availabilty via an OPENSSL_FIPS
define. It uses this define to determine whether to publish -fips at
the end of the version displayed. Applications that utilize the version
reported by OpenSSL will see a mismatch if they compare it to what curl
reports, as curl is not modifying the version in the same way. This
change simply adds a check to see if OPENSSL_FIPS is defined, and will
alter the reported version to match what OpenSSL itself provides. This
only appears to be applicable in versions of OpenSSL <1.1.1
Closes #3771
Kamil Dudka (7 May 2019)
- [Frank Gevaerts brought this change]
nss: allow fifos and character devices for certificates.
Currently you can do things like --cert <(cat ./cert.crt) with (at least) the
openssl backend, but that doesn't work for nss because is_file rejects fifos.
I don't actually know if this is sufficient, nss might do things internally
(like seeking back) that make this not work, so actual testing is needed.
Closes #3807
Daniel Gustafsson (6 May 2019)
- test2100: Fix typos in test description
Daniel Stenberg (6 May 2019)
- ssh: define USE_SSH if SSH is enabled (any backend)
Closes #3846
Steve Holme (5 May 2019)
- winbuild: Add our standard copyright header to the winbuild batch files
- makedebug: Fix ERRORLEVEL detection after running where.exe
Closes #3838
Daniel Stenberg (5 May 2019)
- urlapi: add CURLUPART_ZONEID to set and get
The zoneid can be used with IPv6 numerical addresses.
Updated test 1560 to verify.
Closes #3834
- [Taiyu Len brought this change]
WRITEFUNCTION: add missing set_in_callback around callback
Closes #3837
- RELEASE-NOTES: synced
- CURLMOPT_TIMERFUNCTION.3: warn about the recursive risk [ci skip]
Reported-by: Ricardo Gomes
Bug: #3537
Closes #3836
- CURLOPT_CHUNK_BGN_FUNCTION.3: document the struct and time value
The time field in the curl_fileinfo struct will always be zero. No code
was ever implemented to actually convert the date string to a time_t.
Fixes #3829
Closes #3835
- OS400/ccsidcurl.c: code style fixes
- OS400/ccsidcurl: replace use of Curl_vsetopt
(and make the code style comply)
Fixes #3833
- urlapi: strip off scope id from numerical IPv6 addresses
... to make the host name "usable". Store the scope id and put it back
when extracting a URL out of it.
Also makes curl_url_set() syntax check CURLUPART_HOST.
Fixes #3817
Closes #3822
- RELEASE-NOTES: synced
- multiif.h: remove unused protos
... for functions related to pipelining. Those functions were removed in
2f44e94efb3df.
Closes #3828
- [Yiming Jing brought this change]
travis: mesalink: temporarily disable test 3001
... due to SHA-1 signatures in test certs
- [Yiming Jing brought this change]
travis: upgrade the MesaLink TLS backend to v1.0.0
Closes #3823
Closes #3776
- ConnectionExists: improve non-multiplexing use case
- better log output
- make sure multiplex is enabled for it to be used
- multi: provide Curl_multiuse_state to update information
As soon as a TLS backend gets ALPN conformation about the specific HTTP
version it can now set the multiplex situation for the "bundle" and
trigger moving potentially queued up transfers to the CONNECT state.
- process_pending_handles: mark queued transfers as previously pending
With transfers being queued up, we only move one at a a time back to the
CONNECT state but now we mark moved transfers so that when a moved
transfer is confirmed "successful" (it connected) it will trigger the
move of another pending transfer. Previously, it would otherwise wait
until the transfer was done before doing this. This makes queued up
pending transfers get processed (much) faster.
- http: mark bundle as not for multiuse on < HTTP/2 response
Fixes #3813
Closes #3815
Daniel Gustafsson (1 May 2019)
- cookie: Guard against possible NULL ptr deref
In case the name pointer isn't set (due to memory pressure most likely)
we need to skip the prefix matching and reject with a badcookie to avoid
a possible NULL pointer dereference.
Closes #3820 #3821
Reported-by: Jonathan Moerman
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Patrick Monnerat (30 Apr 2019)
- os400: Add CURLOPT_MAXAGE_CONN to ILE/RPG bindings
Kamil Dudka (29 Apr 2019)
- nss: provide more specific error messages on failed init
Closes #3808
Daniel Stenberg (29 Apr 2019)
- [Reed Loden brought this change]
docs: minor polish to the bug bounty / security docs
Closes #3811
- CURL_MAX_INPUT_LENGTH: largest acceptable string input size
This limits all accepted input strings passed to libcurl to be less than
CURL_MAX_INPUT_LENGTH (8000000) bytes, for these API calls:
curl_easy_setopt() and curl_url_set().
The 8000000 number is arbitrary picked and is meant to detect mistakes
or abuse, not to limit actual practical use cases. By limiting the
acceptable string lengths we also reduce the risk of integer overflows
all over.
NOTE: This does not apply to `CURLOPT_POSTFIELDS`.
Test 1559 verifies.
Closes #3805
- [Tseng Jun brought this change]
curlver.h: use parenthesis in CURL_VERSION_BITS macro
Closes #3809
Marcel Raad (27 Apr 2019)
- [Simon Warta brought this change]
cmake: rename CMAKE_USE_DARWINSSL to CMAKE_USE_SECTRANSP
Closes https://github.com/curl/curl/pull/3769
Steve Holme (23 Apr 2019)
- ntlm: Missed pre-processor || (or) during rebase for cd15acd0
- ntlm: Support the NT response in the type-3 when OpenSSL doesn't include MD4
Just like we do for mbed TLS, use our local implementation of MD4 when
OpenSSL doesn't support it. This allows a type-3 message to include the
NT response.
Daniel Gustafsson (23 Apr 2019)
- INTERNALS: fix misindentation of ToC item
Kerberos was incorrectly indented as a subsection under FTP, which is
incorrect as they are both top level sections. A fix for this was first
attempted in commit fef38a0898322f285401c5ff2f5e7c90dbf3be63 but that
was a few paddles short of being complete.
- [Aron Bergman brought this change]
INTERNALS: Add structs to ToC
Add the subsections under "Structs in libcurl" to the table of contents.
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
- [Aron Bergman brought this change]
INTERNALS: Add code highlighting
Make all struct members under the Curl_handler section
print in monospace font.
Closes #3801
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Daniel Stenberg (22 Apr 2019)
- docs/BUG-BOUNTY: bug bounty time [skip ci]
Introducing the curl bug bounty program on hackerone. We now recommend
filing security issues directly in the hackerone ticket system which
only is readable to curl security team members.
Assisted-by: Daniel Gustafsson
Closes #3488
Steve Holme (22 Apr 2019)
- sasl: Don't send authcid as authzid for the PLAIN mechanism as per RFC 4616
RFC 4616 specifies the authzid is optional in the client authentication
message and that the server will derive the authorisation identity
(authzid) from the authentication identity (authcid) when not specified
by the client.
Jay Satiro (22 Apr 2019)
- [Gisle Vanem brought this change]
memdebug: fix variable name
Follow-up to 76b6348 which renamed logfile as curl_dbg_logfile.
Ref: https://github.com/curl/curl/commit/76b6348#r33259088
Steve Holme (21 Apr 2019)
- vauth/cleartext: Don't send the authzid if it is empty
Follow up to 762a292f.
Daniel Stenberg (21 Apr 2019)
- test 196,197,198: add 'retry' keyword [skip ci]
- RELEASE-NOTES: synced
- CURLOPT_MAXAGE_CONN: set the maximum allowed age for conn reuse
... and disconnect too old ones instead of trying to reuse.
Default max age is set to 118 seconds.
Ref: #3722
Closes #3782
Daniel Gustafsson (20 Apr 2019)
- [Po-Chuan Hsieh brought this change]
altsvc: Fix building with cookies disables
ALTSVC requires Curl_get_line which is defined in lib/cookie.c inside a #if
check of HTTP and COOKIES. That makes Curl_get_line undefined if COOKIES is
disabled. Fix by splitting out the function into a separate file which can
be included where needed.
Closes #3717
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Daniel Stenberg (20 Apr 2019)
- test1002: correct the name [skip ci]
- test660: verify CONNECT_ONLY with IMAP
which basically just makes sure LOGOUT is *not* issued on disconnect
- Curl_disconnect: treat all CONNECT_ONLY connections as "dead"
Since the connection has been used by the "outside" we don't know the
state of it anymore and curl should not use it anymore.
Bug: https://curl.haxx.se/mail/lib-2019-04/0052.html
Closes #3795
- multi: fix the statenames (follow-up fix from 2f44e94efb3df8e)
The list of names must be in sync with the defined states in the header
file!
Steve Holme (16 Apr 2019)
- openvms: Remove pre-processors for Windows as VMS cannot support them
- openvms: Remove pre-processor for SecureTransport as VMS cannot support it
Fixes #3768
Closes #3785
Jay Satiro (16 Apr 2019)
- TODO: Add issue link to an existing entry
Daniel Stenberg (16 Apr 2019)
- RELEASE-NOTES: synced
Jay Satiro (16 Apr 2019)
- tool_help: Warn if curl and libcurl versions do not match
.. because functionality may be affected if the versions differ.
This commit implements TODO 18.7 "warning if curl version is not in sync
with libcurl version".
Ref: https://github.com/curl/curl/blob/curl-7_64_1/docs/TODO#L1028-L1033
Closes https://github.com/curl/curl/pull/3774
Steve Holme (16 Apr 2019)
- md5: Update the function signature following d84da52d
- md5: Forgot to update the code alignment in d84da52d
- md5: Return CURLcode from the internally accessible functions
Following 28f826b3 to return CURLE_OK instead of numeric 0.
Daniel Gustafsson (15 Apr 2019)
- tests: Run global cleanup at end of tests
Make sure to run curl_global_cleanup() when shutting down the test
suite to release any resources allocated in the SSL setup. This is
clearly visible when running tests with PolarSSL where the thread
lock calloc() memory which isn't released when not running cleanup.
Below is an excerpt from the autobuild logs:
==12368== 96 bytes in 1 blocks are possibly lost in loss record 1 of 2
==12368== at 0x4837B65: calloc (vg_replace_malloc.c:752)
==12368== by 0x11A76E: curl_dbg_calloc (memdebug.c:205)
==12368== by 0x145CDF: Curl_polarsslthreadlock_thread_setup
(polarssl_threadlock.c:54)
==12368== by 0x145B37: Curl_polarssl_init (polarssl.c:865)
==12368== by 0x14129D: Curl_ssl_init (vtls.c:171)
==12368== by 0x118B4C: global_init (easy.c:158)
==12368== by 0x118BF5: curl_global_init (easy.c:221)
==12368== by 0x118D0B: curl_easy_init (easy.c:299)
==12368== by 0x114E96: test (lib1906.c:32)
==12368== by 0x115495: main (first.c:174)
Closes #3783
Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Marcel Raad (15 Apr 2019)
- travis: use mbedtls from Xenial
No need to build it from source anymore.
Closes https://github.com/curl/curl/pull/3779
- travis: use libpsl from Xenial
This makes building libpsl and libidn2 from source unnecessary and
removes the need for the autopoint and libunistring-dev packages.
Closes https://github.com/curl/curl/pull/3779
Daniel Stenberg (15 Apr 2019)
- runtests: start socksd like other servers
... without a $srcdir prefix. Triggered by the failures in several
autobuilds.
Closes #3781
Daniel Gustafsson (14 Apr 2019)
- socksd: Fix typos
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
- socksd: Properly decorate static variables
Mark global variables static to avoid compiler warning in Clang when
using -Wmissing-variable-declarations.
Closes #3778
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Steve Holme (14 Apr 2019)
- md(4|5): Fixed indentation oddities with the importation of replacement code
The indentation from 211d5329 and 57d6d253 was a little strange as
parts didn't align correctly, uses 4 spaces rather than 2. Checked
the indentation of the original source so it aligns, albeit, using
curl style.
- md5: Code style to return CURLE_OK rather than numeric 0
- md5: Corrected code style for some pointer arguments
Marcel Raad (13 Apr 2019)
- travis: update some builds to xenial
Xenial comes with more up-to-date software versions and more available
packages, some of which we currently build from source. Unfortunately,
some builds would fail with Xenial because of assertion failures in
Valgrind when using OpenSSL, so leave these at Trusty.
Closes https://github.com/curl/curl/pull/3777
Daniel Stenberg (13 Apr 2019)
- test: make tests and test scripts use socksd for SOCKS
Make all SOCKS tests use socksd instead of ssh.
- socksd: new SOCKS 4+5 server for tests
Closes #3752
- singleipconnect: show port in the verbose "Trying ..." message
To aid debugging better.
- [tmilburn brought this change]
CURLOPT_ADDRESS_SCOPE: fix range check and more
Commit 9081014 fixed most of the confusing issues between scope id and
scope however 844896d added bad limits checking assuming that the scope
is being set and not the scope id.
I have fixed the documentation so it all refers to scope ids.
In addition Curl_if2ip refered to the scope id as remote_scope_id which
is incorrect, so I renamed it to local_scope_id.
Adjusted-by: Daniel Stenberg
Closes #3655
Closes #3765
Fixes #3713
- urlapi: stricter CURLUPART_PORT parsing
Only allow well formed decimal numbers in the input.
Document that the number MUST be between 1 and 65535.
Add tests to test 1560 to verify the above.
Ref: https://github.com/curl/curl/issues/3753
Closes #3762
Jay Satiro (13 Apr 2019)
- [Jan Ehrhardt brought this change]
winbuild: Support MultiSSL builds
- Remove the lines in winbuild/Makefile.vc that generate an error with
multiple SSL backends.
- Add /DCURL_WITH_MULTI_SSL in winbuild/MakefileBuild.vc if multiple SSL
backends are set.
Closes https://github.com/curl/curl/pull/3772
Daniel Stenberg (12 Apr 2019)
- travis: remove mesalink builds (temporarily?)
Since the mesalink build started to fail on travis, even though we build
a fixed release version, we disable it to prevent it from blocking
progress.
Closes #3767
- openssl: mark connection for close on TLS close_notify
Without this, detecting and avoid reusing a closed TLS connection
(without a previous GOAWAY) when doing HTTP/2 is tricky.
Reported-by: Tom van der Woerdt
Fixes #3750
Closes #3763
- RELEASE-NOTES: synced
Steve Holme (11 Apr 2019)
- vauth/cleartext: Update the PLAIN login function signature to match RFC 4616
Functionally this doesn't change anything as we still use the username
for both the authorisation identity and the authentication identity.
Closes #3757
Daniel Stenberg (11 Apr 2019)
- test1906: verify CURLOPT_CURLU + CURLOPT_PORT usage
Based-on-code-by: Poul T Lomholt
- url: always clone the CUROPT_CURLU handle
Since a few code paths actually update that data.
Fixes #3753
Closes #3761
Reported-by: Poul T Lomholt
- CURLOPT_DNS_USE_GLOBAL_CACHE: remove
Remove the code too. The functionality has been disabled in code since
7.62.0. Setting this option will from now on simply be ignored and have
no function.
Closes #3654
Marcel Raad (11 Apr 2019)
- travis: install libgnutls28-dev only for --with-gnutls build
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install libnss3-dev only for --with-nss build
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install libssh2-dev only for --with-libssh2 build
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install libssh-dev only for --with-libssh build
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install krb5-user only for --with-gssapi build
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install lcov only for the coverage job
Reduces the time needed for the other jobs a little.
Closes https://github.com/curl/curl/pull/3721
- travis: install clang only when needed
This reduces the GCC job runtimes a little and it's needed to
selectively update clang builds to xenial.
Closes https://github.com/curl/curl/pull/3721
- AppVeyor: enable testing for WinSSL build
Closes https://github.com/curl/curl/pull/3725
- build: fix Codacy/CppCheck warnings
- remove unused variables
- declare conditionally used variables conditionally
- suppress unused variable warnings in the CMake tests
- remove dead variable stores
- consistently use WIN32 macro to detect Windows
Closes https://github.com/curl/curl/pull/3739
- polarssl_threadlock: remove conditionally unused code
Make functions no-ops if neither both USE_THREADS_POSIX and
HAVE_PTHREAD_H nor both USE_THREADS_WIN32 and HAVE_PROCESS_H are
defined. Previously, if only one of them was defined, there was either
code compiled that did nothing useful or the wrong header included for
the functions used.
Also, move POLARSSL_MUTEX_T define to implementation file as it's not
used externally.
Closes https://github.com/curl/curl/pull/3739
- lib557: initialize variables
These variables are only conditionally initialized.
Closes https://github.com/curl/curl/pull/3739
- lib509: add missing include for strdup
Closes https://github.com/curl/curl/pull/3739
- README.md: fix no-consecutive-blank-lines Codacy warning
Consistently use one blank line between blocks.
Closes https://github.com/curl/curl/pull/3739
- tests/server/util: fix Windows Unicode build
Always use the ANSI version of FormatMessage as we don't have the
curl_multibyte gear available here.
Closes https://github.com/curl/curl/pull/3758
Daniel Stenberg (11 Apr 2019)
- curl_easy_getinfo.3: fix minor formatting mistake
Daniel Gustafsson (11 Apr 2019)
- xattr: skip unittest on unsupported platforms
The stripcredentials unittest fails to compile on platforms without
xattr support, for example the Solaris member in the buildfarm which
fails with the following:
CC unit1621-unit1621.o
CC ../libtest/unit1621-first.o
CCLD unit1621
Undefined first referenced
symbol in file
stripcredentials unit1621-unit1621.o
goto problem 2
ld: fatal: symbol referencing errors. No output written to .libs/unit1621
collect2: error: ld returned 1 exit status
gmake[2]: *** [Makefile:996: unit1621] Error 1
Fix by excluding the test on such platforms by using the reverse
logic from where stripcredentials() is defined.
Closes #3759
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Steve Holme (11 Apr 2019)
- emailL Added reference to RFC8314 for implicit TLS
- README: Schannel, stop calling it "winssl"
Stick to "Schannel" everywhere - follow up to 180501cb.
Jakub Zakrzewski (10 Apr 2019)
- cmake: clear CMAKE_REQUIRED_LIBRARIES after each use
This fixes GSSAPI builds with the libraries in a non-standard location.
The testing for recv() were failing because it failed to link
the Kerberos libraries, which are not needed for this or subsequent
tests.
fixes #3743
closes #3744
- cmake: avoid linking executable for some tests with cmake 3.6+
With CMAKE_TRY_COMPILE_TARGET_TYPE set to STATIC_LIBRARY, the try_compile()
(which is used by check_c_source_compiles()) will build static library
instead of executable. This avoids linking additional libraries in and thus
speeds up those checks a little.
This commit also avoids #3743 (GSSAPI build errors) on itself with cmake
3.6 or above. That issue was fixed separately for all versions.
Ref: #3744
- cmake: minor cleanup
- Remove nneeded include_regular_expression.
It was setting what is already a default.
- Remove duplicated include.
- Don't check for pre-3.0.0 CMake version.
We already require at least 3.0.0, so it's just clutter.
Ref: #3744
Steve Holme (8 Apr 2019)
- build-openssl.bat: Fixed support for OpenSSL v1.1.0+
- build-openssl.bat: Perfer the use of if statements rather than goto (where possible)
- build-openssl.bat: Perform the install for each build type directly after the build
- build-openssl.bat: Split the install of static and shared build types
- build-openssl.bat: Split the building of static and shared build types
- build-openssl.bat: Move the installation into a separate function
- build-openssl.bat: Move the build step into a separate function
- build-openssl.bat: Move the OpenSSL configuration into a separate function
- build-openssl.bat: Fixed the BUILD_CONFIG variable not being initialised
Should the parent environment set this variable then the build might
not be performed as the user intended.
Daniel Stenberg (8 Apr 2019)
- socks: fix error message
- config.d: clarify that initial : and = might need quoting [skip ci]
Fixes #3738
Closes #3749
- RELEASE-NOTES: synced
bumped to 7.65.0 for next release
- socks5: user name and passwords must be shorter than 256
bytes... since the protocol needs to store the length in a single byte field.
Reported-by: XmiliaH on github
Fixes #3737
Closes #3740
- [Jakub Zakrzewski brought this change]
test: urlapi: urlencode characters above 0x7f correctly
- [Jakub Zakrzewski brought this change]
urlapi: urlencode characters above 0x7f correctly
fixes #3741
Closes #3742
- [Even Rouault brought this change]
multi_runsingle(): fix use-after-free
Fixes #3745
Closes #3746
The following snippet
```
int main()
{
CURL* hCurlHandle = curl_easy_init();
curl_easy_setopt(hCurlHandle, CURLOPT_URL, "http://example.com");
curl_easy_setopt(hCurlHandle, CURLOPT_PROXY, "1");
curl_easy_perform(hCurlHandle);
curl_easy_cleanup(hCurlHandle);
return 0;
}
```
triggers the following Valgrind warning
```
==4125== Invalid read of size 8
==4125== at 0x4E7D1EE: Curl_llist_remove (llist.c:97)
==4125== by 0x4E7EF5C: detach_connnection (multi.c:798)
==4125== by 0x4E80545: multi_runsingle (multi.c:1451)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
==4125== Address 0x9b3d1d0 is 1,120 bytes inside a block of size 1,600 free'd
==4125== at 0x4C2ECF0: free (vg_replace_malloc.c:530)
==4125== by 0x4E62C36: conn_free (url.c:756)
==4125== by 0x4E62D34: Curl_disconnect (url.c:818)
==4125== by 0x4E48DF9: Curl_once_resolved (hostip.c:1097)
==4125== by 0x4E8052D: multi_runsingle (multi.c:1446)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
==4125== Block was alloc'd at
==4125== at 0x4C2F988: calloc (vg_replace_malloc.c:711)
==4125== by 0x4E6438E: allocate_conn (url.c:1654)
==4125== by 0x4E685B4: create_conn (url.c:3496)
==4125== by 0x4E6968F: Curl_connect (url.c:4023)
==4125== by 0x4E802E7: multi_runsingle (multi.c:1368)
==4125== by 0x4E8197C: curl_multi_perform (multi.c:2072)
==4125== by 0x4E766A0: easy_transfer (easy.c:625)
==4125== by 0x4E76915: easy_perform (easy.c:719)
==4125== by 0x4E7697C: curl_easy_perform (easy.c:738)
==4125== by 0x4008BE: main (in /home/even/curl/test)
```
This has been bisected to commit 2f44e94
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14109
Credit to OSS Fuzz
- pipelining: removed
As previously planned and documented in DEPRECATE.md, all pipelining
code is removed.
Closes #3651
- [cclauss brought this change]
tests: make Impacket (SMB server) Python 3 compatible
Closes #3731
Fixes #3289
Marcel Raad (6 Apr 2019)
- [Simon Warta brought this change]
cmake: set SSL_BACKENDS
This groups all SSL backends into the feature "SSL" and sets the
SSL_BACKENDS analogue to configure.ac
Closes https://github.com/curl/curl/pull/3736
- [Simon Warta brought this change]
cmake: don't run SORT on empty list
In case of an empty list, SORTing leads to the cmake error "list
sub-command SORT requires list to be present."
Closes https://github.com/curl/curl/pull/3736
Daniel Gustafsson (5 Apr 2019)
- [Eli Schwartz brought this change]
configure: fix default location for fish completions
Fish defines a vendor completions directory for completions that are not
installed as part of the fish project itself, and the vendor completions
are preferred if they exist. This prevents trying to overwrite the
builtin curl.fish completion (or creating file conflicts in distro
packaging).
Prefer the pkg-config defined location exported by fish, if it can be
found, and fall back to the correct directory defined by most systems.
Closes #3723
Reviewed-by: Daniel Gustafsson
Marcel Raad (5 Apr 2019)
- ftplistparser: fix LGTM alert "Empty block without comment"
Removing the block is consistent with line 954/957.
Closes https://github.com/curl/curl/pull/3732
- transfer: fix LGTM alert "Comparison is always true"
Just remove the redundant condition, which also makes it clear that
k->buf is always 0-terminated if this break is not hit.
Closes https://github.com/curl/curl/pull/3732
Jay Satiro (4 Apr 2019)
- [Rikard Falkeborn brought this change]
smtp: fix compiler warning
- Fix clang string-plus-int warning.
Clang 8 warns about adding a string to an int does not append to the
string. Indeed it doesn't, but that was not the intention either. Use
array indexing as suggested to silence the warning. There should be no
functional changes.
(In other words clang warns about "foo"+2 but not &"foo"[2] so use the
latter.)
smtp.c:1221:29: warning: adding 'int' to a string does not append to the
string [-Wstring-plus-int]
eob = strdup(SMTP_EOB + 2);
~~~~~~~~~~~~~~~~^~~~
Closes https://github.com/curl/curl/pull/3729
此处可能存在不合适展示的内容，页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容，可点击提交进行申诉，我们将尽快为您处理。
马建仓 AI 助手