README.md · Tim/STM32xx StdPeriph Lib

# STM32xx StdPeriph Lib

#### 介绍
STM32 MCU StdPeriph Lib 
组件、测试Demo 在StdPeriph Lib 基础上开发、移植

#### 软件包
- STM32F0xx_StdPeriph_Lib_V1.5.0
- STM32F10x_StdPeriph_Lib_V3.5.0 
- STM32F4xx_DSP_StdPeriph_Lib_V1.8.0
- STM32F10x_AN2557_FW_V3.3.0
- APM32F10x_SDK_v1.0.1
- CH579EVT  南京沁恒BLE
- GD32F10x 
- CH573EVT_SDK_V1.0  南京沁恒BLE

#### 如何使用
##### STM32F10x_StdPeriph_Lib_V3.5.0 
 - Open the Project.uvproj project
 - In the build toolbar select the project config:
     - STM32100B-EVAL: to configure the project for STM32 Medium-density Value line devices
     @note The needed define symbols for this config are already declared in the preprocessor section: USE_STDPERIPH_DRIVER, STM32F10X_MD_VL, USE_STM32100B_EVAL

- STM3210C-EVAL: to configure the project for STM32 Connectivity line devices
     @note The needed define symbols for this config are already declared in the preprocessor section: USE_STDPERIPH_DRIVER, STM32F10X_CL, USE_STM3210C_EVAL

- STM3210B-EVAL: to configure the project for STM32 Medium-density devices
     @note The needed define symbols for this config are already declared in the preprocessor section: USE_STDPERIPH_DRIVER, STM32F10X_MD, USE_STM3210B_EVAL

- STM3210E-EVAL: to configure the project for STM32 High-density devices
     @note The needed define symbols for this config are already declared in the preprocessor section: USE_STDPERIPH_DRIVER, STM32F10X_HD, USE_STM3210E_EVAL

- STM3210E-EVAL_XL: to configure the project for STM32 XL-density devices
     @note The needed define symbols for this config are already declared in the preprocessor section: USE_STDPERIPH_DRIVER, STM32F10X_XL, USE_STM3210E_EVAL

- STM32100E-EVAL: to configure the project for STM32 High-density Value line devices
     @note The needed define symbols for this config are already declared in the preprocessor section: USE_STDPERIPH_DRIVER, STM32F10X_HD_VL, USE_STM32100E_EVAL
     
 - Rebuild all files: Project->Rebuild all target files
 - Load project image: Debug->Start/Stop Debug Session
 - Run program: Debug->Run (F5)

@note
 - Low-density Value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
 - Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers where the Flash memory density ranges between 16 and 32 Kbytes.
 - Medium-density Value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.  
 - Medium-density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
 - High-density Value line devices are STM32F100xx microcontrollers where the Flash memory density ranges between 256 and 512 Kbytes.  
 - High-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 256 and 512 Kbytes. 
 - XL-density devices are STM32F101xx and STM32F103xx microcontrollers where the Flash memory density ranges between 512 and 1024 Kbytes.
 - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.

#### Hardware and Software environment
##### STM32F4xx_DSP_StdPeriph_Lib_V1.8.0

- This example runs on STM32F405xx/407xx, STM32F415xx/417xx, STM32F427xx/437xx, STM32F429xx/439xx,STM32F401xx/410xx/411xE,STM32F412xx, 
    STM32F446xx and STM32F469xx/479xx and STM32F413_423xx devices.

- This example has been tested with STMicroelectronics 
	STM324xG-EVAL (STM32F40xx/STM32F41xx Devices),
	STM32F410xx-Nucleo RevC (STM32F410xx), 
	STM32F412G-Discovery RevC(STM32F412xx), 
	STM32F413H-DISCO revA (STM32F413_423xx), 
	STM32437I-EVAL (STM32F427xx/STM32F437xx Devices), 
	STM324x9I-EVAL RevB (STM32F429xx/STM32F439xx Devices), 
	STM32446E-EVAL RevB (STM32F446xx Devices) 
	and STM32F469I-EVAL RevB (STM32F469xx Devices) evaluation boards.

Tim/STM32xx StdPeriph Lib

简介

发行版

贡献者

近期动态

Tim/STM32xx StdPeriph Lib .gitee-modal { width: 500px !important; }

简介

发行版

贡献者

近期动态

搜索帮助

Tim/STM32xx StdPeriph Lib