代码拉取完成,页面将自动刷新
同步操作将从 Kangyupl/CS144-libsponge 强制同步,此操作会覆盖自 Fork 仓库以来所做的任何修改,且无法恢复!!!
确定后同步将在后台操作,完成时将刷新页面,请耐心等待。
#!/bin/bash
show_usage () {
echo "Usage: $0 <start | stop | restart | check> [tunnum ...]"
exit 1
}
start_tun () {
local TUNNUM="$1" TUNDEV="tun$1"
ip tuntap add mode tun user "${SUDO_USER}" name "${TUNDEV}"
ip addr add "${TUN_IP_PREFIX}.${TUNNUM}.1/24" dev "${TUNDEV}"
ip link set dev "${TUNDEV}" up
ip route change "${TUN_IP_PREFIX}.${TUNNUM}.0/24" dev "${TUNDEV}" rto_min 10ms
# Apply NAT (masquerading) only to traffic from CS144's network devices
iptables -t nat -A PREROUTING -s ${TUN_IP_PREFIX}.${TUNNUM}.0/24 -j CONNMARK --set-mark ${TUNNUM}
iptables -t nat -A POSTROUTING -j MASQUERADE -m connmark --mark ${TUNNUM}
echo 1 > /proc/sys/net/ipv4/ip_forward
}
stop_tun () {
local TUNDEV="tun$1"
iptables -t nat -D PREROUTING -s ${TUN_IP_PREFIX}.${1}.0/24 -j CONNMARK --set-mark ${1}
iptables -t nat -D POSTROUTING -j MASQUERADE -m connmark --mark ${1}
ip tuntap del mode tun name "$TUNDEV"
}
start_all () {
while [ ! -z "$1" ]; do
local INTF="$1"; shift
start_tun "$INTF"
done
}
stop_all () {
while [ ! -z "$1" ]; do
local INTF="$1"; shift
stop_tun "$INTF"
done
}
restart_all() {
stop_all "$@"
start_all "$@"
}
check_tun () {
[ "$#" != 1 ] && { echo "bad params in check_tun"; exit 1; }
local TUNDEV="tun${1}"
# make sure tun is healthy: device is up, ip_forward is set, and iptables is configured
ip link show ${TUNDEV} &>/dev/null || return 1
[ "$(cat /proc/sys/net/ipv4/ip_forward)" = "1" ] || return 2
}
check_sudo () {
if [ "$SUDO_USER" = "root" ]; then
echo "please execute this script as a regular user, not as root"
exit 1
fi
if [ -z "$SUDO_USER" ]; then
# if the user didn't call us with sudo, re-execute
exec sudo $0 "$MODE" "$@"
fi
}
# check arguments
if [ -z "$1" ] || ([ "$1" != "start" ] && [ "$1" != "stop" ] && [ "$1" != "restart" ] && [ "$1" != "check" ]); then
show_usage
fi
MODE=$1; shift
# set default argument
if [ "$#" = "0" ]; then
set -- 144 145
fi
# execute 'check' before trying to sudo
# - like start, but exit successfully if everything is OK
if [ "$MODE" = "check" ]; then
declare -a INTFS
MODE="start"
while [ ! -z "$1" ]; do
INTF="$1"; shift
check_tun ${INTF}
RET=$?
if [ "$RET" = "0" ]; then
continue
fi
if [ "$((RET > 1))" = "1" ]; then
MODE="restart"
fi
INTFS+=($INTF)
done
# address only the interfaces that need it
set -- "${INTFS[@]}"
if [ "$#" = "0" ]; then
exit 0
fi
echo -e "[$0] Bringing up tunnels ${INTFS[@]}:"
fi
# sudo if necessary
check_sudo "$@"
# get configuration
. "$(dirname "$0")"/etc/tunconfig
# start, stop, or restart all intfs
eval "${MODE}_all" "$@"
此处可能存在不合适展示的内容,页面不予展示。您可通过相关编辑功能自查并修改。
如您确认内容无涉及 不当用语 / 纯广告导流 / 暴力 / 低俗色情 / 侵权 / 盗版 / 虚假 / 无价值内容或违法国家有关法律法规的内容,可点击提交进行申诉,我们将尽快为您处理。